Trabajos moving en Amarillo, TexasCrear alertas

We're looking for Progressive Care Unit RNs for an immediate travel nurse opening in Amarillo, TX. The right RN should have 1-2 years recent acute care experience. Read below for more requirements. As a PCU Travel Nurse, you will care for patients who require close monitoring and frequent assessment, but aren't unstable enough to need ICU care. Progressive Care Unit RNs will utilize computer equipment to monitor cardiac and other vital information, detecting any changes and thereby enabling intervention of life-threatening or emergency situations. Close observation is necessary as many PCU patients receive a significant amount of complex medications, sometimes through an intravenous line that may need to be adjusted or titrated. The PCU RN is sometimes also called a step-down nurse, and the PCU is also known as cardiac stepdown, medical stepdown, neuro stepdown, surgical stepdown and ER holding. As a PCU Travel Nurse, you should be prepared to perform the following tasks: • Provide basic bedside care; stabilize critical cardiac patients., • Change dressings, insert catheters and start IVs., • Prepare, administer and record prescribed medication, reporting any adverse reactions to treatment., • Monitor and adjust specialized equipment used on patients, and interpret and record electronic displays., • Initiate corrective action whenever information from monitoring equipment shows adverse symptomatology. PCU Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. Because of the fast-paced environment, Progressive Care Unit RNs must possess good skills for coping with stress and be able to relate to people of all ages and backgrounds. Requirements*: BLS, ACLS, 2 Years • Additional certifications may be required before beginning an assignment.

We're looking for Medical Surgical RNs for an immediate travel nurse opening in Amarillo, TX. The right RN should have 1-2 years recent acute care experience. Read below for more requirements. As a MedSurg RN, you will conduct patient assessments and prioritize data collection based on patients' immediate conditions or needs. MedSurg RNs perform ongoing assessments and appropriate treatments as ordered by a physician. Documenting patient findings and providing education and support to patients' families is essential to this travel nurse position. As a Medical Surgical Travel Nurse, you should be prepared to perform the following tasks: • Provide bedside care for a variety of patients, including pre- and post-op patients., • Prepare, administer and record prescribed medication, reporting any adverse reactions to treatment., • Change dressings, insert catheters and start IVs., • Prepares equipment and aids physician during examination and treatment of patient., • Educates patients on surgical procedures., • Participates in discharge planning and initiates patient education plan as prescribed by physician. Medical Surgical Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. RNs will work in a fast-paced environment treating patients that may be confused, agitated, and/or uncooperative. Requirements*: BLS, 2 Years • Additional certifications may be required before beginning an assignment.

We're looking for Labor and Delivery RNs for an immediate travel nurse opening in Amarillo, TX. The right RN should have 3 years' recent acute care experience. Read below for more requirements. L&D Travel Nurses provide care and support for women before, during and after delivery of a baby. L&D RNs must ensure that the medical as well as emotional needs of their patients are met at all times throughout the birthing process. As an L&D RN, you'll be responsible for assisting physicians when epidurals or pain medications are administered, episiotomies are performed, or when the patient requires preparation for a cesarean delivery. As an L&D Travel Nurse, you should be prepared to perform the following tasks: • Stay with and monitor patient throughout labor., • Monitor contractions and help patients with breathing techniques., • Check cervix periodically to monitor progression/lack of dilation., • Ensure beds are kept clean and dry; clean up bodily fluids expelled before and after birthing process., • Aid physician with drapes, gloves, gowns, delivery instruments, etc., • Immediate care of newborn. L&D Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. Because of the fast-paced environment, L&D RNs must possess good skills for coping with stress and be able to relate to people of all ages and backgrounds. Requirements*: BLS, ACLS, AWHONN, NRP, 3 Years • Additional certifications may be required before beginning an assignment.

Job Description Position Overview: We are seeking a hardworking and dependable Underground Utilities Laborer to join our team. This role involves performing physically demanding tasks on building, highway, heavy construction, excavation, and demolition projects. The ideal candidate will be comfortable working outdoors in various conditions and be capable of operating a variety of hand and power tools. Key Responsibilities: * Assist with the installation, repair, and maintenance of underground utilities. * Operate tools and equipment such as air hammers, tampers, and cement mixers. * Prepare and clean construction sites by removing debris and potential hazards. * Excavate and backfill trenches manually or with machinery. * Signal and assist equipment operators to ensure safe movement and alignment of machinery and materials. * Direct and control traffic near and within work zones for safety. * Maintain tools and equipment by cleaning and lubricating them regularly. * Support skilled tradespeople and follow instructions from supervisors and foremen. Preferred Qualifications: * Valid Driver's License (required). * Ability to work as part of a team in a fast-paced, physically demanding environment. Physical & Environmental Requirements: * Must be able to bend, squat, push, pull, crawl, kneel, climb, and balance. * Frequent reaching above shoulder height and crouching. * Repetitive movement of both feet and use of both hands for grasping and manipulation. * Must be able to stand for up to 4 hours and walk for up to 3 hours during an 8-hour shift. * Frequently lift and carry loads up to 24 lbs. * Exposure to outdoor elements, including extreme weather, dust, fumes, and noise. * Work around moving machinery and in environments with variable temperatures and humidity. Job Posted by ApplicantPro

Job Description JOB TITLE: Yard Hand DEPARTMENT: Retail LOCATION: Amarillo, TX PAY: $17/hr BENEFITS: Benefits include a full health insurance policy that is 100% covered by Prime, a 50% matching 401(k) package, and a $25,000 life insurance policy. Comprehensive dental, vision and supplemental life insurance options are also available. PTO is available after 1 year. 8 paid holidays. SUMMARY: Our Yard Hand is responsible for assisting in day-to-day operations within our retail shop/ store and steel yard. DUTIES AND RESPONSIBILITIES: • Assist in loading and unloading material from machines., • Assist operators and drivers in the retail shop/ store and yard., • Handle and transport materials and equipment within the facility., • Use power tools and machinery when needed., • Set out or put away tools when needed., • Clean up store and yard free of debris, dirt, and hazardous material., • Follow instructions from supervisors to perform tasks., • Report issues with equipment or unsafe conditions. QUALIFICATIONS: • Ability to understand and follow written and verbal instructions., • Ability to read and interpret documents such as safety rules, operating/maintenance instructions, and procedure manuals., • Positive attitude and desire to work as a team player., • Ability for cross training in other areas of the shop., • Follow safety procedures including the proper use of Personal Protective Equipment. COMPETENCIES: • Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan., • Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly., • Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. PHYSICAL DEMANDS AND WORK ENVIRONMENT: • Frequently required to stand, walk, bend, stoop, kneel or crawl., • Frequently required to utilize hand and finger dexterity., • Frequently required to talk or hear., • Frequently work near moving mechanical parts., • Occasional exposure to outside weather conditions., • Occasional exposure to extreme heat or cold (non-weather)., • While performing the duties of this job, the noise level in the work environment is usually very loud., • The employee must be able to lift and/or move more than 50 pounds. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description SUMMARY: The Receiving Clerk is responsible for ensuring all inbound shipments are received accurately, safely, and efficiently. This role includes inspecting trucks, verifying product condition and quantities, processing receipts in D365, and properly staging, labeling, and storing inventory. The Receiving Clerk will also support replenishment tasks and assist with other warehouse operations as needed. KEY RESPONSIBILITIES: • Greet and check in drivers upon arrival., • Offload trailers safely and efficiently, following warehouse safety procedures., • Inspect all products received for damage and verify quantities against shipping documents., • Accurately receive inventory into Microsoft D365., • Assign and apply License Plates (LPs) to pallets., • Label and store pallets with receiving date and ensure proper identification., • Print and process replenish work orders to support production needs., • Maintain accurate documentation for all receipts and transactions, excellent inventory control., • Support other warehouse functions as needed, including picking, shipping, transfers, and inventory control., • Follow all safety, quality, and operational procedures. QUALIFICATIONS & EDUCATION: • High school diploma or equivalent., • Prior warehouse or receiving experience strongly preferred., • Familiarity with Microsoft D365 or similar Warehouse Management Systems a plus., • Ability to operate forklifts, and other warehouse equipment (certification may be required)., • Strong attention to detail and accuracy in data entry., • Ability to work in a fast-paced environment and support multiple warehouse functions., • Excellent teamwork and communication skills. PHYSICAL DEMANDS AND WORK ENVIORNMENT: • Office environment usually quiet, • Required to maneuver plant and warehouse workspaces which involve:, • Frequently standing, walking, sitting, talking, or hearing, work around loud machinery and moving parts., • Continually utilize hand and finger dexterity, exposed to extreme heat, extreme cold, wet and/or humid conditions (non-weather)., • Occasionally required to climb, balance, bend, stoop, push, pull, and lift up to 50 pounds safely.

Company Description Pilot Company is an industry-leading network of travel centers with more than 30,000 team members and over 750 retail and fueling locations in 44 states and six Canadian provinces. Our energy and logistics division serves as a top supplier of fuel, employing one of the largest tanker fleets and providing critical services to oil operations in our nation's busiest basins. Pilot Company supports a growing portfolio of brands with expertise in supply chain and retail operations, logistics and transportation, technology and digital innovation, construction, maintenance, human resources, finance, sales and marketing. Founded in 1958 by Jim A. Haslam II and currently led by CEO Adam Wright, our founding values, people-first culture and commitment to giving back remains true to us today. Whether we are serving guests, a fellow team member, or a trucking company, we are dedicated to fueling people and keeping North America moving. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or any other characteristic protected under applicable federal, state, or local law. Military encouraged to apply. Job Description Bring your technical talent to our Pilot Team! NOT too good to be true, you will receive a substantial annual bonus, be off on weekends and NO on-call! You are dispatched from home and work 45-50+ hours a week (even during winter). Company service vehicle, all tools, equipment, cellular phone/iPad and laptop provided. Come play an important part of keeping roughly 15 of our store locations running smoothly near Amarillo, TX The purpose of this job is to perform installations, maintenance, and repairs of facility HVAC/R, food service equipment, plumbing, and electrical systems within various food and retail locations. Responsibilities: • Respond to service requests; troubleshoot, diagnose, and repair based on warranty and industry standards, • Communicate with service tech supervisor and store management to report repair status, • Complete same day work order repair notes and forward to supervisor; ensure charge allocations are entered accordingly, • Monitor truck stock to ensure required parts are available, • Maintain service vehicle, tools, and uniforms in accordance with company standards, • Ensure facility interiors and exteriors are inspected for safety and maintenance issues, • Ensure repairs, equipment, and work activities are performed in accordance with OSHA regulations, • Model behaviors that support the company's common purpose; ensure guests and team members are supported at the highest level, • Ensure all activities are in compliance with rules, regulations, policies, and procedures Qualifications • High school diploma or equivalent certificate required, • Valid state driver's license and positive driving history required, • Minimum three years' recent maintenance experience of commercial HVAC systems required; certification preferred, • Minimum three years' recent maintenance experience to include repairing commercial cooking or refrigeration equipment required, • Basic knowledge, understanding, and ability to repair commercial plumbing and electrical systems required, • Basic understanding of OSHA guidelines, policies, and procedures, • Basic knowledge of the functionality of a Building Management System (BMS) and Energy Management System (EMS), • Strong analytical and problem solving skills, • Excellent written and verbal communication skills, • Ability to work independently with minimal supervision, • Intermediate mathematical skills, • Ability to read and interpret site drawings, • Ability to collaborate with various departments, • Strong attention to detail, • Ability to work in congested areas during business hours, • Strong customer service skills, • Travel required less than 10%, • Climb ladders, • Lift and carry up to 50 pounds, • Exposure to inclement weather, • Ability to bend, stoop, twist, crawl, kneel Additional Information • Nation-wide Medical Plan/Dental/Vision, • Flexible Spending Accounts, • Weekly pay, • 401K match, • Tuition Assistance, • Adoption Assistance, • PTO, • Fuel Discount Job Location Google Maps requires functional cookies to be enabled

Job Description iParametrics partners with leading organizations across the U.S., and Internationally, to support high-impact programs in construction, engineering, disaster recovery, and emergency management. Our nationwide reach and proven expertise help deliver results that matter. From federal programs to private-sector initiatives, we provide specialized talent and operational expertise that keep complex projects moving and missions on track. Project Overview We are seeking a Field Superintendent to join a mission-critical construction program located near Amarillo, Texas. This role is fully site-based and requires leadership in coordinating day-to-day field execution, ensuring safety compliance, maintaining schedule alignment, and driving quality construction delivery. The Field Superintendent plays a key leadership role, directing subcontractors and trade partners across civil, structural, architectural, and MEP scopes in a complex data center environment. Role’s Responsibilities * Oversee and coordinate daily construction activities across CSA and MEP trades. * Direct subcontractors and field staff to ensure compliance with design, codes, specifications, and schedules. * Drive execution of short-interval plans and look-ahead schedules aligned with the master schedule. * Monitor productivity and implement corrective actions to address constraints. * Lead daily coordination meetings, site walks, and safety briefings. * Enforce project safety protocols, participate in audits, and support incident investigations. * Monitor quality of installations, collaborate with QA/QC teams, and manage punch lists and turnover milestones. * Support commissioning by ensuring system readiness and subcontractor participation. * Maintain detailed daily reports, progress documentation, and as-builts. * Provide field feedback on RFIs, submittals, cost estimates, and construction documentation. * Resolve design and constructability issues in the field. * Communicate progress, constraints, and labor updates to the Building Superintendent. * Collaborate with clients, engineers, architects, consultants, and subcontractors to maintain alignment and resolve challenges. Must Have Qualifications * Experience: Minimum 5 years of field supervision in construction, with at least 3 years on hyperscale or mission-critical data center projects (preferred). * Experience: Strong background managing structural steel, MEP systems, utilities, and large-scale concurrent scopes. * Knowledge: Deep understanding of construction means and methods, trade sequencing, commissioning workflows, and survey techniques. * Certification: OSHA 30 required. * Education: High school diploma or GED required. Bachelor’s degree in Civil, Mechanical, Electrical, Structural Engineering, Construction Management, or equivalent craft-level work experience strongly preferred. * Software Knowledge: Proficiency with Microsoft Office Suite, Bluebeam, Procore, and Primavera P6. * Skills: Ability to interpret design documents, schedules, and specifications; strong observation and coordination skills. * Skills: Excellent written and verbal communication skills; ability to lead teams under pressure with professionalism. * Physical Requirements: Ability to work outdoors in varying weather, climb ladders/scaffolds, enter confined spaces, lift up to 50 pounds, and access all levels of a construction site. Preferred Qualifications * Experience: Prior leadership on hyperscale or large mission-critical data center projects. * Software Knowledge: Experience with AutoCAD, Revit, and Navisworks. * Experience: Strong record of collaboration with QA/QC and commissioning teams. Join iParametrics’ National Response & Project Support Network At iParametrics, we connect talented professionals with high-impact projects that make a difference—whether it’s supporting federal initiatives, advancing major infrastructure programs, or responding to critical emergencies. By joining our roster network, you’ll be first in line for future opportunities that match your expertise, availability, and interests. Our team is committed to building lasting relationships with our roster members, keeping you informed, and helping you navigate each step from interest to deployment. ???? Why Join iParametrics? For over 20 years, iParametrics has been trusted to deliver mission-critical solutions that safeguard national security, strengthen infrastructure, and support emergency management. Our work spans all 50 states, U.S. territories, and 39 countries—partnering with federal agencies and private sector leaders to take on projects that matter. When you join us, you’re not just taking a job—you’re becoming part of a team driven by purpose, innovation, and results. From supporting large-scale construction programs to guiding homeland security and risk management initiatives, your work will help shape safer, more resilient communities worldwide. ???? Perks & Benefits: * ???? Comprehensive Coverage – Medical, dental, and vision plans * ???? Retirement Savings – 401(k) with company match * ???? Time to Recharge – Paid time off and holidays * ???? Competitive Pay – Bi-weekly salary, based on experience About iParametrics Founded in 2003 and headquartered in metro Atlanta, Georgia, we have team members and project offices nationwide. Our culture values adaptability, expertise, and collaboration—giving you the tools, opportunities, and support to make a lasting impact. iParametrics delivers a variety of mission-critical management and support services for construction, emergency management, homeland security, risk management, and other programs to commercial and public sector clients. Equal Employment Opportunity iParametrics is an Equal Opportunity Employer. We are committed to a work environment that supports and respects all individuals without discrimination based on race, color, religion, national origin, age, sex, pregnancy, marital status, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Application review will consider without limitation the following criteria: qualifications, education, and experience specific to the job description/duties as well as prior experience with leading construction companies. Applicants must be able to pass the iParametrics Drug and Alcohol test. This job description is intended to outline the general nature and level of work that would be performed by project team members. It is not designed to cover or contain a comprehensive list of all responsibilities, duties, or skills required for this job. This description is subject to change at the discretion of the company, with or without notice.

Job Description This full-time position is support for order pulling and forklift support for agency orders, product recovery, Food Bank drivers (as needed), and finished goods put-away. This position will act as order selector, forklift operator, and receiver or any other capacity will be required on an as needed basis. Specifically, the hours of this position is 7:00am-4pm, M-F. Essential Functions: • Pull, pick, and stage product for agency order utilizing pick ticket system., • Responsible for daily warehouse and equipment organization and cleanliness with pre-shift equipment checks., • Safe operation of forklift and other equipment for the process of moving pallets and entering/exiting tight quarters with product., • Must be able to fulfill all duties and requirements of a Warehouse Receiver or Forklift Operator and will receive shipments, and other forklift support activities upon request or as demand dictates., • Accurate and efficient pallet put-away: placing and tagging appropriate pallet tags, safe movement into correct racking and locations. Locations where work is needed will vary and will include the dry warehouse, coolers (40 degrees) and freezer (-15 degrees)., • Accurate and efficient pallet drops using Warehouse Management System to scan locations, pallet tags and move pallets in racking to appropriate locations for pullers., • Clean warehouse and product recovery area on a daily basis, • Maintain pest control log, • Update the recall board on a weekly basis, • Advise of any repairs to management, • Keep the warehouse, freezers, and coolers cleaned and organized, • Maintain the warehouse to meet all Health Department and Feeding America guidelines., • Practice safe handling procedures, • Responsible for training trustees, court-appointed community service, and volunteers on sorting procedures., • Must pass background investigation, pre-employment physical and drug test., • Must have reliable transportation., • Must have High School diploma or GED, • Vitality – the force that drives us forward with energy and enthusiasm, • Demonstrates cooperation, teamwork and a ‘can do’ attitude., • Consistently contributes ideas and solutions and actively participates in discussions., • Looks for the best in all people and all situations., • Innovation – the spirit that drives us to pursue and initiate creative solutions, • Displays desire and willingness to try new things and adapt to a changing environment., • Displays an inner drive and self-motivation in the search for new and better ways to accomplish objectives., • Collaborates with partners and colleagues in brainstorming activities to develop new solutions and processes., • Stewardship – the commitment that drives us to care for the mission and resources, • Ensures a safe and healthy environment., • Leads by example, putting the needs of others first and helping people develop and perform to the best of their ability., • The company will provide reasonable accommodations to qualified individuals with disabilities., • Utilize multi-limb coordination and flexibility combined with control precision to perform fine motor skills including finger manipulation, grasping, feeling, arm-hand steadiness, in order to push, pull or lift objects, • Exerting in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently, and/or in excess of 20 pounds of force constantly to move objects., • Utilizes multi-limb coordination to balance on even or uneven surfaces, stoop, kneel, crouch, crawl, stand, and walk, reach over shoulders or below the knees., • Auditory attention and hearing sensitivity is required, as candidates must possess the ability to distinguish various sounds that serve as key maintenance indicators., • Full exposure to extreme weather changes and humidity/moisture relative to atmospheric condition variations. Includes exposure to extreme summer and winter temperatures, as well as rain, sleet, and snow., • Full exposure to dust, chemicals, gases, fumes, smoke, excessive noise, and/or vibrations., • Work generally performed in an industrial environment (indoor or outdoor) with various hazards and noise exposure., • Travel may be required for assignments, meetings, and training., • Adheres to policies and procedures as outlined in the Employee Handbook/Manual, • Acts as a role model within and outside the agency, • Performs duties as workload necessitates, • Maintains a positive and respective attitude, • Maintains a professional appearance, • Communicates regularly with supervisor about department issues/challenges, • Demonstrates flexible and efficient time management and ability to prioritize workload, • Must work some Saturdays as volunteer groups are scheduled, • Consistently reports working on time prepared to perform duties of the position This job description does not alter the company's employment-at-will. The company reserves to make appropriate changes in this job description at the sole discretion of the management. This job description is an outline of the position's current duties and responsibilities. Company DescriptionThe mission of High Plains Food Bank is to alleviate hunger in the Texas Panhandle. Founded in 1982, High Plains Food Bank (HPFB) is a nonprofit organization serving as the clearing house for collection, storage, and distribution of donated and purchased grocery products, providing aide to the top 29 counties in the Texas Panhandle. HPFB partners with 165 different agencies, including churches, senior centers, child care facilities, halfway houses, soup kitchens, Kids Cafes, emergency pantries, shelters, and other nonprofits. Counties in our 30,000 square mile service area include Armstrong, Briscoe, Carson, Castro, Childress, Collingsworth, Cottle, Dallam, Deaf Smith, Donley, Gray, Hale, Hall, Hansford, Hardeman, Hartley, Hemphill, Hutchinson, Lipscomb, Moore, Ochiltree, Oldham, Parmer, Potter, Randall, Roberts, Sherman, Swisher, and Wheeler. Many families in the Texas Panhandle are food insecure, or truly make choices between paying utilities or buying food each month. HPFB can provide 4 meals worth of food for every dollar donated, in part due to our membership with Feeding America and their nationwide partnerships. Other sources of donated food include the USDA’s Emergency Food Assistance Program, local food drives, grocery stores, processing plants, and individual donors. Additionally, HPFB purchases food to supplement the warehouse supply in order to provide a variety of foods high in nutritional value. HPFB accepts donations and make recurring giving easy through our secure web page: hpfb.org/donate. The need is real, and your help is vital.The mission of High Plains Food Bank is to alleviate hunger in the Texas Panhandle. Founded in 1982, High Plains Food Bank (HPFB) is a nonprofit organization serving as the clearing house for collection, storage, and distribution of donated and purchased grocery products, providing aide to the top 29 counties in the Texas Panhandle. HPFB partners with 165 different agencies, including churches, senior centers, child care facilities, halfway houses, soup kitchens, Kids Cafes, emergency pantries, shelters, and other nonprofits. Counties in our 30,000 square mile service area include Armstrong, Briscoe, Carson, Castro, Childress, Collingsworth, Cottle, Dallam, Deaf Smith, Donley, Gray, Hale, Hall, Hansford, Hardeman, Hartley, Hemphill, Hutchinson, Lipscomb, Moore, Ochiltree, Oldham, Parmer, Potter, Randall, Roberts, Sherman, Swisher, and Wheeler.\r\n\r\n \r\n\r\nMany families in the Texas Panhandle are food insecure, or truly make choices between paying utilities or buying food each month. HPFB can provide 4 meals worth of food for every dollar donated, in part due to our membership with Feeding America and their nationwide partnerships. Other sources of donated food include the USDA’s Emergency Food Assistance Program, local food drives, grocery stores, processing plants, and individual donors. Additionally, HPFB purchases food to supplement the warehouse supply in order to provide a variety of foods high in nutritional value. HPFB accepts donations and make recurring giving easy through our secure web page: hpfb.org/donate. The need is real, and your help is vital.

Job DescriptionDescription: At JDH and each of our subsidiaries, we know that agriculture is about more than moving commodities—it’s about connecting people and building relationships that matter. Founded in 1886 and proudly family-owned for five generations, our deep roots in the industry enable us to manage grains, co-products, animal feed, and feed ingredients effectively. With an extensive transportation network, we connect supply and demand across the U.S., Canada, Mexico, and Asia. We are committed to delivering reliability, value, and innovation, while providing a supportive and safe workplace where our team can thrive and grow. Job Summary: The Controller will report directly to the General Manager. The position will be responsible for directing and overseeing all accounting and finance functions applicable to the division. Essential Duties and Responsibilities: • Manage all day-to-day accounting operations including grain accounting, A/R, A/P, inventory, and cost accounting for manufacturing., • Direct the preparation of monthly and year-end financial statements, ensuring timely and accurate reporting., • Monitor and reconcile financial performance, including margin projections vs. actual results, and provide variance analysis., • Lead budgeting, forecasting, and gross margin analysis processes., • Oversee capital expenditure accounting, including project costing, depreciation, and asset schedules., • Provide financial analysis, contract audits, and pricing reports to support revenue managers, merchandisers, and feed-mill operations., • Supervise and develop accounting and administrative staff, ensuring effective daily operations, training, and compliance with HR policies., • Ensure strong internal controls across all business activities., • Manage compliance with audits, tax authorities, licensing requirements, and regulatory agencies., • Oversee compliance with UCC/EFS liens on grain purchases., • Support the General Manager and executive leadership with ad hoc reporting, projections, and business modeling for new opportunities., • Drive a culture of safety, accountability, opportunistic curiosity and contributes to creating an environment where people want to work., • Other duties as assigned.Requirements:, • Bachelor’s degree or higher in accounting or related business field, • Minimum 5 years of financial leadership and management experience, • Grain and feed industry knowledge or experience with mark-to-market accounting is strongly desired, • Strong analytical skills with high attention to detail, • Ability to communicate with management, team members, and support staff, • Proficient in Microsoft Office Suite, especially Excel and Outlook, • Strong ability to prioritize tasks and meet deadlines Physical Demands: · Frequent sitting, use of computer, communication via telephone · Ability to navigate an office environment. · Regular and predictable attendance in office or site location. · Job may require occasional travel within the United States.

Job Description Now Hiring: CDL Driver / Sign Installer All Training Provided $1500 Sign-On Bonus! If you're the type who likes working outside, solving problems with your hands, climbing to new heights (literally), and seeing the results of your work light up a skyline... we've got a hard hat with your name on it. At SkyRite, we don't just install signs. We finish what others start. Our signs are commitments, symbols of our customers' identity, and they only shine because of the skilled technicians who install and service them with pride and precision. That's you. This role is full-time and hourly, with the opportunity for steady overtime...and thanks to the Big Beautiful Bill, your overtime pay is now tax-free. That means more of what you earn, stays yours. This job is hands-on, physical, and outdoors. You'll work on lifts, rooftops, ladders, and trucks. You'll install cool signs, fix busted lights, chase down outages, and make sure our customers stay visible and vibrant. Every job is different. Every day matters. And your work literally shapes the skyline. What You'll Actually Do • Drive & operate sign trucks, • Help install and service illuminated and non-illuminated signs and lighting, • Read drawings, review job specs, and follow codes to get it right the first time, • Load your truck with tools, materials, and equipment to minimize return trips, • Communicate clearly with the office, your crew, and the customer We're not looking for someone who just wants to punch a clock. We're building the next generation of licensed Journeyman Sign Electricians who want more. Every Sign Tech is put on a Training Path to grow skills, learn the trade, and eventually earn the licenses that open the door to bigger pay, more complex projects, and leadership roles. If you're not moving forward, you're holding us back. We'll train you, invest in you, and challenge you...but you've got to want it. You'll Love This Job If You... • Like working outdoors and with your hands, • Take pride in doing work that's seen by thousands, • Enjoy physical work that keeps you moving and learning, • Want a career path with real growth, not just a job, • Competitive hourly pay based on your experience, • Overtime pay that's now tax-free under the new federal law, • Medical, dental, and vision insurance with multiple plan options, • Company-paid life insurance ($25,000), • Company-paid long-term disability coverage, • Optional FSA, HSA (if eligible), short-term disability, critical care, supplemental life insurance, and even pet insurance, • Two weeks of paid time off per year (accrues and grows with tenure), • Eight paid holidays per year, • Cell phone reimbursement, • Training and licensing support for Journeyman Sign Electrician license, • A valid commercial driver's license and 5 months of CDL driving experience, • A reliable work ethic, • Comfortable with heights, ladders, and physical labor, • Willingness to learn, follow instructions, and work as a team Apply Today SkyRite is an equal opportunity employer. Keywords: Entry level, Sign Installation, Sign Technician, Journeyman, Master, Electrician, Installation, Heights, Blue Collar, Outdoor Elements, Apprentice, Commercial lighting, Pole Lights, Building Lights, Neon, Fluorescent, CDL.

Job Description Now Hiring: Sign Technician | SkyRite Sign Co. Amarillo, TX | Full-Time | Hourly with Overtime Pay (Now Tax-Free!) If you're the type who likes working outside, solving problems with your hands, climbing to new heights (literally), and seeing the results of your work light up a skyline... we've got a hard hat with your name on it. At SkyRite, we don't just install signs. We finish what others start. Our signs are commitments, symbols of our customers' identity, and they only shine because of the skilled technicians who install and service them with pride and precision. That's you. This role is full-time and hourly, with the opportunity for steady overtime...and thanks to the Big Beautiful Bill, your overtime pay is now tax-free. That means more of what you earn, stays yours. This job is hands-on, physical, and outdoors. You'll work on lifts, rooftops, ladders, and trucks. You'll install cool signs, fix busted lights, chase down outages, and make sure our customers stay visible and vibrant. Every job is different. Every day matters. And your work literally shapes the skyline. What You'll Actually Do • Install and service illuminated and non-illuminated signs and lighting, • Read drawings, review job specs, and follow codes to get it right the first time, • Load your truck with tools, materials, and equipment to minimize return trips, • Communicate clearly with the office, your crew, and the customer We're not looking for someone who just wants to punch a clock. We're building the next generation of licensed Journeyman Sign Electricians and Commercial Drivers who want more. Every Sign Tech is put on a Training Path to grow skills, learn the trade, and eventually earn the licenses that open the door to bigger pay, more complex projects, and leadership roles. If you're not moving forward, you're holding us back. We'll train you, invest in you, and challenge you...but you've got to want it. You'll Love This Job If You... • Like working outdoors and with your hands, • Take pride in doing work that's seen by thousands, • Enjoy physical work that keeps you moving and learning, • Want a career path with real growth, not just a job, • Competitive hourly pay based on your experience, • Overtime pay that's now tax-free under the new federal law, • Medical, dental, and vision insurance with multiple plan options, • Company-paid life insurance ($25,000), • Company-paid long-term disability coverage, • Optional FSA, HSA (if eligible), short-term disability, critical care, supplemental life insurance, and even pet insurance, • Two weeks of paid time off per year (accrues and grows with tenure), • Eight paid holidays per year, • Cell phone reimbursement, • Training and licensing support for CDL and Journeyman Sign Electrician, • Valid driver's license and a reliable work ethic, • Comfortable with heights, ladders, and physical labor, • Willingness to learn, follow instructions, and work as a team Apply Today SkyRite is an equal opportunity employer. Keywords: Entry level, Sign Installation, Sign Technician, Journeyman, Master, Electrician, Installation, Heights, Blue Collar, Outdoor Elements, Apprentice, Commercial lighting, Pole Lights, Building Lights, Neon, Fluorescent, CDL.

Job DescriptionYard Assistant (NCCCO Certified) Location: Amarillo, TX – Sweetwater, TX Reports to: Fleet/Service Director/Operations Managers Travel: Occasionally Compensation: $25-30/hour + Union Position/Benefits Join the Team That Lifts the Heavy Stuff At Crane Services, Inc. (CSI), we don’t just move equipment—we move what others can’t. As one of the largest and most experienced crane and rigging companies in North America, we tackle tough jobs across the Rocky Mountains, Southwest, and Midwest. We are seeking a reliable and safety-focused Yard Assistant with NCCCO certification to join our crane operations team. This position plays a key role in supporting day-to-day yard operations, assisting with crane setup and teardown, equipment organization, and ensuring a clean and efficient work environment. The ideal candidate is hands-on, dependable, and able to operate cranes and lifting equipment safely and efficiently within the yard. What You’ll Do • Operate cranes and lifting equipment within the yard as required (NCCCO certification required)., • Assist with loading and unloading of crane components, counterweights, and rigging., • Organize and maintain yard inventory including rigging, crane parts, and tools., • Perform pre-use inspections of equipment and ensure all items are in safe working order., • Assist mechanics and operators with equipment preparation before deployment to jobsites., • Maintain a clean, organized, and hazard-free yard environment., • Support transportation and logistics by helping coordinate inbound/outbound shipments., • Follow all company safety policies, OSHA standards, and crane operation protocols., • Perform minor maintenance, fueling, and washing of cranes and support equipment as needed., • Assist with ground prep, and other yard upkeep duties as assigned.What We’re Looking For, • Valid NCCCO Certification (minimum: swing cab or lattice boom crane)., • Valid CDL preferred but not required., • Experience working in a crane, construction, or heavy equipment environment., • Strong mechanical aptitude and understanding of crane components., • Ability to work outdoors in varied weather conditions., • Must be reliable, safety-minded, and able to work independently or with a team., • Ability to lift 50+ lbs and perform physically demanding tasks.What You’ll Get, • Pay: $25–$30/hour, depending on experience, • Hours: Monday–Friday, with occasional weekends if needed, • Show up hungry, • Don’t accept average, • Think independently Working conditions Lifting, carrying, reaching, pushing, and/or pulling; climbing and balancing; frequent stooping, kneeling, crouching, and/or crawling; and significant finger dexterity necessary. • Ability to lift 70 lbs., • Ability to operate a forklift safely . • Must be able to pass a pre-employment WorkSTEPS physical. • Requires passing a pre-employment background check and drug screen to the satisfaction of Crane Service Inc., • This position is exposed to work near moving mechanical parts, and moderate noise levels., • Must a possess a clean MVR & valid Driver's License, • This job requires the ability to obtain a DOT Medical Certification., • Requires working and driving outdoors in various climates/temperatures and the possibility of sitting for an extended period. The employee may be required to wear appropriate PPE equipment. The employee could occasionally be exposed to extreme temperatures, fumes, or airborne particles. The noise level in the workplace is moderate. Physical requirements The Americans with Disabilities Act (ADA) requires employers to identify essential functions of a role. As a result, this job requires the employee to climb, stand, and lift and/or move up to 75 pounds. Reasonable accommodation may be provided to enable individuals with disabilities to perform the tasks. Direct reports N/A EEO Statement Crane Service Inc provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description iParametrics partners with leading organizations across the U.S. and internationally to support high-impact programs in construction, engineering, disaster recovery, and emergency management. Our nationwide reach and proven expertise help deliver results that matter. From federal programs to private-sector initiatives, we provide specialized talent and operational expertise that keep complex projects moving and missions on track. Project Overview We are seeking a Cost Engineer to support a major construction program in Amarillo, TX (and additional U.S. locations). This role is critical to ensuring accurate cost tracking, forecasting, and reporting across complex, high-visibility projects. The Cost Engineer will collaborate with project managers, superintendents, and subcontractors to validate costs, monitor budgets, and ensure compliance with client requirements. Role’s Responsibilities * Set up and maintain job cost reports, including budgets, commitments, forecasts, contingencies, and expenditures. * Track project costs by bid package, field order, and change category as defined by the client. * Develop and maintain project indicators, including visual cost graphics. * Validate cost proposals with subcontractors and vendors. * Conduct monthly reconciliations of project cost reports. * Interpret construction documents to quantify material requirements. * Perform on-screen take-offs and summarize material quantities. * Prepare and manage cost authorization packages. Must Have Qualifications * Education: Bachelor’s degree in Mechanical, Civil, Electrical Engineering, Construction Management, or equivalent degree/field experience. * Experience: Minimum 2 years of construction estimating or cost engineering experience. * Skill: Proficiency in Microsoft Office 365 (Excel, Word, Outlook, Teams, PowerPoint). * Software Knowledge: Familiarity with project management software such as Prolog, Procore, E-Builder, Bluebeam, Microsoft Project, or Primavera P6. * Skill: Strong ability to read and interpret construction documents, specifications, and drawings. * Skill: Excellent written and oral communication skills, with ability to build effective relationships across teams. * Work Conditions: Ability to work extended hours or off-shifts to meet construction schedule requirements. * Eligibility: Must be authorized to work in the U.S. (no sponsorship available). * Testing: Must pass company drug and alcohol testing requirements. Preferred Qualifications * Experience: Industrial and/or high-tech semiconductor manufacturing project experience. * Certification: LEED Accredited Professional (or ability to achieve within 18 months). * Software Knowledge: Experience with AutoCAD, Revit, or Navisworks. * Skill: Strong organizational ability to manage technical data and apply CSI specification system. Join iParametrics’ National Response & Project Support Network At iParametrics, we connect talented professionals with high-impact projects that make a difference—whether it’s supporting federal initiatives, advancing major infrastructure programs, or responding to critical emergencies. By joining our roster network, you’ll be first in line for future opportunities that match your expertise, availability, and interests. ???? Why Join iParametrics? For over 20 years, iParametrics has been trusted to deliver mission-critical solutions that safeguard national security, strengthen infrastructure, and support emergency management. Our work spans all 50 states, U.S. territories, and 39 countries—partnering with federal agencies and private sector leaders to take on projects that matter. ???? Perks & Benefits * ???? Comprehensive health, dental, and vision coverage * ???? Retirement savings with 401(k) company match * ???? Paid time off and holidays iParametrics delivers a variety of mission-critical management and support services for construction, emergency management, homeland security, risk management, and other programs to commercial and public sector clients. We were founded in 2003 and are based in metro Atlanta, Georgia, with staff and project offices nationwide. For over 20 years, we have provided guidance and expertise to help our clients confidently navigate the most challenging and complex issues relating to the safety and security of their people, assets, and operations. This includes technical and programmatic support of complex critical infrastructure programs in 39 countries, all 50 states, and 3 US Territories. iParametrics is an Equal Opportunity Employer. We are committed to a work environment that supports and respects all individuals without discrimination based on race, color, religion, national origin, age, sex, pregnancy, marital status, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Application review will consider without limitation the following criteria: qualifications, education, and experience specific to the job description/duties as well as prior experience with leading construction companies. Applicants must be able to pass the iParametrics Drug and Alcohol test. This job description is intended to outline the general nature and level of work that would be performed by project team members. It is not designed to cover or contain a comprehensive list of all responsibilities, duties, or skills required for this job. This description is subject to change at the discretion of the company, with or without notice

Job DescriptionDescription: Hulcher Services is seeking a motivated and success-driven Apprentice Operator I. You will play a vital role in transporting, operating and the servicing of assigned heavy equipment used in clearing railroad derailments by lifting and moving derailed railway cars and locomotives. About Us: Hulcher Service is an industry leader with more than 500 employees and over 25 divisions located in the United States and Mexico assisting customers with derailments as well as engineering work, track maintenance, disaster response, and environmental projects. What You'll Do: • Drive tractor-trailer or escort vehicles., • Material handling of heavy steel chains, blocks and steel cables, and other devices., • Climbing and crawling on and under derailed railroad cars., • Maintenance, cleaning and setup of equipment requiring use of small and large tools including cutting torch and welding., • Digging, hammering, and other physical types of work with various tools, • Lifting 100 lbs. maximum with frequent lifting and/or carrying objects up to 50 lbs., • Room for growth, • Must have a valid Class A CDL with NO restrictions., • Must have a valid driver's license., • Ability to work on-call 24/7 365 days a year in an emergency response environment., • Ability to travel up to 50% of the time., • Monday through Sunday on the job or possibly at division., • On call for 24 hours for derailments requiring immediate response., • 8-hours/day Monday through Friday; on call at other times for derailments requiring immediate response., • The Response Team is to be available at all times and all hours of the day.

Job DescriptionShop Mechanic Location: Amarillo, TX Reports to: Service Foreman Travel: Occasionally Compensation: $30-40/hour + Union Benefits Join the Team That Lifts the Heavy Stuff At Crane Services, Inc. (CSI), we don’t just move equipment—we move what others can’t. As one of the largest and most experienced crane and rigging companies in North America, we tackle tough jobs across the Rocky Mountains, Southwest, and Midwest. We are seeking a skilled Shop Mechanic with hands-on experience working on cranes, trucks, and trailers. The ideal candidate is detail-oriented, safety-focused, and capable of diagnosing, repairing, and maintaining heavy equipment in a fast-paced shop environment. What You’ll Do • Inspect, troubleshoot, and repair cranes, trucks, and trailers, • Perform preventative maintenance and safety checks, • Diagnosing hydraulic, electrical, and mechanical issues, • Keep accurate maintenance and repair records, • Support field operations when neededWhat We’re Looking For, • Proven experience as a mechanic for heavy equipment, cranes, trucks, and trailers, • Strong knowledge of hydraulic and electrical systems, • Ability to read technical manuals and schematics, • Must be safety-conscious and reliable, • CDL preferred but not required, • What You’ll Get, • Pay: $30–$40/hour, depending on experience, • Hours: Monday–Friday, with occasional weekends if needed, • Show up hungry, • Don’t accept average, • Think independently Working conditions Lifting, carrying, reaching, pushing, and/or pulling; climbing and balancing; frequent stooping, kneeling, crouching, and/or crawling; and significant finger dexterity necessary. • Ability to lift 70 lbs., • Ability to operate a forklift safely . • Must be able to pass a pre-employment WorkSTEPS physical. • Requires passing a pre-employment background check and drug screen to the satisfaction of Crane Service Inc., • This position is exposed to work near moving mechanical parts, and moderate noise levels., • Must a possess a clean MVR & valid Driver's License, • This job requires the ability to obtain a DOT Medical Certification., • Requires working and driving outdoors in various climates/temperatures and the possibility of sitting for an extended period. The employee may be required to wear appropriate PPE equipment. The employee could occasionally be exposed to extreme temperatures, fumes, or airborne particles. The noise level in the workplace is moderate. Physical requirements The Americans with Disabilities Act (ADA) requires employers to identify essential functions of a role. As a result, this job requires the employee to climb, stand, and lift and/or move up to 75 pounds. Reasonable accommodation may be provided to enable individuals with disabilities to perform the tasks. Direct reports N/A EEO Statement Crane Service Inc provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description SUMMARY: The Quality Supervisor ensures that all food products meet internal quality standards and external regulatory requirements. This role involves supervising quality control team members, overseeing inspections and testing, implementing quality assurance protocols, and driving continuous improvement initiatives. KEY RESPONSIBILITIES: • Responsible for the release of finished goods in accordance with organizational procedures and processes., • Lead and manage quality control technicians and inspectors, • Assign daily tasks, monitor performance, and provide coaching and feedback, • Develop and monitor individual development plans (IDPs) and track progress, • Implement and monitor quality control procedures aligned with Good Manufacturing Practices (GMP), Hazard Analysis Critical Control Point (HACCP), and other food safety standards, • Guiding activities and behaviors in compliance throughout facility operations., • Maintain accurate and timely documentation of inspections, testing, and corrective actions, • Oversee inspections of raw materials, in-process items, and finished goods, • Approve inspection reports, product release documents, and quality records, • Coordinate with third-party labs for product testing when needed, • Conduct root cause analysis and lead corrective/preventive actions, • Identify trends in defects and implement solutions to reduce non-conformance, • Collaborate with production and sanitation teams to optimize quality processes, • Perform other job functions as related to the position assigned by management. QUALIFICATIONS & EDUCATION: • Bachelor’s degree in food science, Chemistry, Biology, or equivalent combination of education and experience required., • Minimum five (5) years in quality control or assurance in food laboratory testing environment., • One (1) year of leadership experience, • Hazard Analysis Critical Control Point (HAACP) Certification required, Food Defense Certification, (FDC) preferred, • SQF Practitioner preferred, • Preventative Controls Qualified Individual (PCQI) certification required, • Proficiency in Microsoft Office, quality management systems, and Laboratory Information Management Systems (LIMS)., • Knowledge of microbiological and chemical testing methods, • Ability to work under pressure and manage multiple priorities PHYSICAL DEMANDS AND WORK ENVIORNMENT: • Office environment usually quiet, • Required to maneuver plant and warehouse workspaces which involve:, • Frequently standing, walking, sitting, talking, or hearing, work around loud machinery and moving parts, • Continually utilize hand and finger dexterity, exposed to extreme heat, extreme cold, wet and/or humid conditions (non-weather),, • Occasionally exposed to outside weather conditions, push, pull, and lift up to 50 pounds safely

Job DescriptionGeneral Description / ObjectiveThe Manager in Training (MIT) program is designed to develop future leaders for Friona Industries’ feedyards. Throughout the program, MITs will learn to assist, supervise, and support feedyard teams in delivering the highest level of animal care, facility maintenance, and operational efficiency. This team member is expected to contribute to Friona’s Safety First culture by working safely, reporting concerns, and actively participating in training. Roles and TasksThe MIT program lasts approximately 12 months. You will be placed in one main department with additional learning in one other department (i.e. Mill & Feed, Cattle & Yard). With final placement being determined by business needs and individual performance. General Responsibilities • Learn and perform essential duties across all feedyard departments., • Assist with daily operations while developing supervisory and leadership skills., • Ensure compliance with OSHA, FDA, and EPA regulations; maintain accurate records., • Model and promote a strong safety culture by practicing and reinforcing safe work habits., • Participate in budgeting, cost control, and inventory management., • Support employee training, development, and limited supervisory duties.Cattle Department, • Receive, inspect, and process incoming cattle loads., • Monitor cattle health, identify sick animals, and assist with treatments per veterinary protocols., • Handle and move cattle in a low-stress manner; support shipping and receiving., • Monitor cattle feed intake and adjust rations according to nutritionist guidelines., • Ensure accurate and timely feed delivery; assess bunk conditions daily., • Operate feed trucks and related equipment when needed., • Support preventive maintenance of feed trucks and equipment.Mill Department, • Support feed milling operations to ensure ration quality and consistency., • Monitor commodity quality and inspect incoming feed ingredients., • Assist with preventive maintenance and repair of mill equipment., • Ensure compliance with feed safety and regulatory requirements.Yard Department, • Assist with pen, road, fencing, and water system maintenance., • Support maintenance and repair of rolling stock and heavy equipment., • Participate in environmental compliance activities, including recordkeeping and testing., • Assist with construction, renovation, crop management, and facility upkeep.Leadership, • May supervisor on a limited basis., • Assist with hiring, training, and planning., • Assist with directing work and assigning tasks, addressing complains and resolving problems.Profile / Professional CompetenciesEducation Requirements:, • Bachelor’s degree in agriculture or equivalent experience in Business or AgricultureSpecial Conditions / Requirements:, • Frequent standing, walking, bending, lifting (50+ lbs), climbing, and shoveling., • Regular operation of feedyard machinery, vehicles, and equipment., • Exposure to extreme weather conditions (heat, cold, rain, wind, dust, snow, hail). Friona Industries participates in E-Verify. We will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS) with information from each new employer’s Form I-9 to confirm work authorization. Powered by JazzHR QVhNI5bnvP

Job Description POSITION DESCRIPTION: The Mobile Maintenance Technician position will diagnose problems and perform identified repairs and routine preventive maintenance services on semi trucks under limited supervision through the use of their mobile service truck and tools. The mobile service truck, tools, and inventory must be maintained and kept in serviceable condition at all times as per company policy and procedures. HLA HIGH LEVERAGE ACTIVITIES (Focus actions that will return the highest impact): • Determines vehicle condition by conducting inspections and diagnostic test, identifying worn and damaged parts focusing on safety, quality, and customer up time., • Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units., • Embrace training opportunities maintaining certification in OEM products KEY RESPONSIBILITIES AND PERFORMANCE MEASURES • Provide technical service to vehicles and equipment. Including trouble shooting, electrical and diagnostic services., • Read Repair Order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Perform general and detailed repair of all trucks, engines, and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Advise the Service Supervisor if additional repair work is necessary, • Tag all warranty parts and returns to warranty clerk., • Maintain a neat and orderly working area, and proper handling of company tools, • Follow safe work practices and procedures, uses safety equipment when required, responds to suggestions for working safely and seeks assistance when necessary., • Attend training classes and keep abreast of factory technical bulletins, • Other duties assigned by manager. QUALIFICATIONS AND EXPERIENCE • High school diploma or GED is required. Combination of education, training, or experience that provides the required knowledge, skills, and abilities will be considered., • Related technical school training preferred., • Three to five years of commercial truck technical service experience., • Engine certifications preferred: Cummins, Detroit, International, etc., • Necessary tools to perform job responsibilities, • Ability to work and learn independently., • Strong written/ verbal communication skills required., • Ability to use various windows-based computer software. Experience with engine software a plus, • Valid commercial drivers license preferred. PHYSICAL AND ENVIRONMENTAL CONDITIONS Duties are performed throughout the inside and outside of the building(s). Employee is exposed to dirt, dust, heat, cold, noise and vibration, fumes and odors, wetness, and humidity, and sometimes darkness. Employee is required to stand, walk, kneel, squat, crawl, bend, and twist. Employee may have to climb and/or lift up to and over 80 pounds frequently. Visual requirements are constant. Specific vision abilities required by this job include close vision and the ability to adjust focus. Due to the nature of the environment, employee is exposed to potential mechanical, chemical, electrical and fire hazards on a regular basis. NOTE: This Position Profile is not intended to be an all-inclusive. Employee may perform other related duties as required to meet the on-going needs of the company. The Position Profile is intended to describe the general nature and level of work being performed by individuals assigned to this job. It is not an exhaustive listing of all responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. Management reserves the right to revise the job or to require that other tasks be performed when circumstances change (e.g. emergencies, changes in personnel, workload, rush jobs or technological development.

Job DescriptionPreventive Maintenance Technician Location: Amarillo, TX Reports to: PM Manager/Parts Manager Travel: 80% Travel Compensation: $28-32/hour + Company Benefits Join the Team That Lifts the Heavy Stuff At Crane Services, Inc. (CSI), we don’t just move equipment—we move what others can’t. As one of the largest and most experienced crane and rigging companies in North America, we tackle tough jobs across the Rocky Mountains, Southwest, and Midwest. We are seeking a detail-oriented and reliable Preventive Service Technician to join our team. In this role, you will be responsible for performing routine maintenance and inspections on equipment and systems to ensure optimal performance, safety, and longevity. This is a field-based/customer-facing role requiring excellent technical and communication skills. What You’ll Do • Perform scheduled preventive maintenance on equipment and systems (e.g., HVAC, differentials, air systems, etc.), • Conduct inspections to identify potential issues and recommend repairs or replacements, • Document service work, inspections, and maintenance records accurately, • Follow all company safety protocols and industry best practices, • Communicate effectively with about service results and recommendations, • Use tools, diagnostic equipment, and service software effectively, • Ensure compliance with all regulatory and quality standards What We’re Looking For • High school diploma or equivalent; technical certifications a plus, • 1+ years of experience in equipment maintenance, service, or a related field, • Knowledge of mechanical, electrical, or hydraulic systems depending on industry, • Ability to read and interpret manuals, schematics, and technical documents, • Strong problem-solving skills and attention to detail, • Valid driver’s license, • Ability to work independently and manage time efficiently, • Ability to be Federal Inspector and Brake Inspector qualifiedWhat You’ll Get, • Pay: $28–$32/hour, depending on experience, • Hours: Monday–Friday, with occasional weekends if needed, • Show up hungry, • Don’t accept average, • Think independently Working conditions Lifting, carrying, reaching, pushing, and/or pulling; climbing and balancing; frequent stooping, kneeling, crouching, and/or crawling; and significant finger dexterity necessary. • Ability to lift 70 lbs., • Ability to operate a forklift safely . • Must be able to pass a pre-employment WorkSTEPS physical. • Requires passing a pre-employment background check and drug screen to the satisfaction of Crane Service Inc., • This position is exposed to work near moving mechanical parts, and moderate noise levels., • Must a possess a clean MVR & valid Driver's License, • This job requires the ability to obtain a DOT Medical Certification., • Requires working and driving outdoors in various climates/temperatures and the possibility of sitting for an extended period. The employee may be required to wear appropriate PPE equipment. The employee could occasionally be exposed to extreme temperatures, fumes, or airborne particles. The noise level in the workplace is moderate. Physical requirements The Americans with Disabilities Act (ADA) requires employers to identify essential functions of a role. As a result, this job requires the employee to climb, stand, and lift and/or move up to 75 pounds. Reasonable accommodation may be provided to enable individuals with disabilities to perform the tasks. Direct reports N/A EEO Statement Crane Service Inc provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionCompany Description Our mission To recognize, appreciate, value, and utilize the unique talents and contributions of all individuals. To create an environment where all Team Members, because of their differences, can reach their highest potential. Our Purpose Domino’s is a Purpose-Inspired and Performance-Driven company with Exceptional People committed to Feed the Power of Possible One Pizza at a Time What We Believe Do the Right Thing Put People First Create Inspired Solutions Champion Our Customers Grow and Win Together How Will We Win Dominant #1 Double Down on Carryout Provide Best-In-Class Delivery Service Maintain Strongest Enterprise Profitability Protect Business from Risk Support a Foundation built by Great People and the Work They Do Every Day How Do We Work Leadership of Self Leadership of Others Job Description Join our dynamic team as a Crew Member (06382) in Amarillo, United States! We're looking for enthusiastic individuals to contribute to our fast-paced and customer-focused environment. As a Crew Member, you'll play a crucial role in ensuring smooth operations and delivering exceptional service to our valued customers. • Operate various equipment efficiently and safely, • Manage stock by moving ingredients from delivery areas to appropriate storage locations, • Prepare food products according to company standards and recipes, • Handle customer orders via phone and in-person with a friendly and professional demeanor, • Conduct inventory counts and complete associated paperwork accurately, • Maintain cleanliness of equipment and facility through daily cleaning tasks, • Process orders using computer systems and point-of-sale terminals, • Collaborate with team members to ensure seamless operations during shifts, • Adhere to all safety and quality control standards, • Adapt to changing priorities and maintain a positive attitude in a fast-paced environmentQualifications, • Must be {AGE} of age or older, • Ability to operate various types of restaurant equipment safely and efficiently, • Strong customer service skills with experience in both phone and face-to-face interactions, • Basic math skills for cash handling and making correct change, • Proficiency in using computer systems, including keyboard and touch screen interfaces, • Physical abilities including motor coordination, near and mid-range vision, and depth perception, • Excellent time management and organizational skills, • Team-oriented mindset with the ability to work collaboratively in a fast-paced environment, • Keen attention to detail, particularly in food preparation and inventory management, • Flexibility to work various shifts as needed, • Strong communication skills, both verbal and written, • Ability to multitask and prioritize responsibilities effectively, • Willingness to learn and adapt to new processes and procedures Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description An established construction firm is seeking a Project Engineer – Doors, Frames, Hardware to support complex commercial building projects in Amarillo, TX. This role is ideal for someone with hands-on commercial construction experience who thrives in fast-paced environments and enjoys working closely with project managers, superintendents, subcontractors, and design teams to keep projects moving smoothly. Key Responsibilities * Assist in project planning by preparing scope packages, monitoring schedules, and supporting cost structure organization * Act as a liaison between field teams, subcontractors, and design professionals to resolve coordination issues and keep work on track * Review and process submittals, RFIs, change documents, and other critical project documentation * Support onsite construction by interpreting drawings, assisting with layout, and ensuring alignment between architectural, structural, and MEP systems Qualifications * Minimum 3 years of commercial construction experience (doors, frames, and hardware experience strongly preferred) * Bachelor’s degree in Engineering, Construction Management, Architecture, or related field (or equivalent field experience) * Proficiency with Microsoft Office 365 and project management/design tools such as Procore, Bluebeam, AutoCAD, Revit, or Navisworks * Strong communication, problem-solving, and organizational skills with the ability to work in high-pressure onsite environments Salary: $87K - 151K (DOE) Bonus: 2 bonuses (Individual and Company) and SAU (stock appreciation units) Per Diem: $160 a day (non-taxable - Hoffman picks-up ) - will start receiving once - boots on ground (to help cover cost to get on getting to site) - (NO company vehicle and NO gas card) Location: Amarillo, TX - 100% onsite Benefits: Benefits: Medical (employee only: $95 a month), Vision, Dental (employee only $8 months), Wellness Incentive can earn $75 credit for employee, FSA, Dependent care, AD&D, Paid Family Medical Leave, LTD, Employee retirement income plan, 401K, PTO (12 hours), employee assistance program, One Medical On Demand/Virtual Clinic - 100% paid, Life Insurance APPLY NOW!! Pay Details: $87,000.00 to $151,000.00 per year Search managed by: Deanna Murphy Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Family Medicine Opportunity in Amarillo, Texas Build your ideal outpatient practice in a rapidly growing part of Amarillo with a respected, physician-led group! Practice Overview • Join a collaborative group of 7 Family Medicine physicians and over 80 providers across multiple specialties, • Open a new, modern clinic with 3 exam rooms per physician and access to your own midlevel support as your panel grows, • Fully outpatient practice with no hospital call; after-hours calls handled via answering service with minimal interruptions, • Design your own schedule; many physicians work Monday-Thursday, 8 AM-5 PM, with optional half-days on Fridays, • $200,000 base salary paid monthly, with bonus potential, • 75% share of net profits once ramped; average physician earnings are $500K, with top earners exceeding $950K, • $20,000-$25,000 sign-on bonus and up to $12,500 in relocation assistance, • Live in one of Amarillo's most desirable, fast-growing areas, featuring affordable housing and top-rated schools, • Access abundant outdoor recreation including Palo Duro Canyon and a vibrant arts scene, • Convenient regional airport with direct flights to major cities, • Benefit from a low cost of living and a supportive, family-friendly community environmentCompany DescriptionWe are a healthcare staffing company that was founded in 2009 and focused on placing physicians and advanced practitioners in permanent, temporary, and executive-level roles. In 2020 we were purchased by the Silicon Valley tech company, Doximity. Since the acquisition, we have been moving at 200 miles an hour, combining the people side of the business with technology to do healthcare staffing in a different way. Curative finds incredible talent with less hassle using better data. We combine the heart and hard work of experienced recruiters with the intelligent technology of Doximity, the world’s largest professional medical network. The result: the commitment and ability to find people who care.We are a healthcare staffing company that was founded in 2009 and focused on placing physicians and advanced practitioners in permanent, temporary, and executive-level roles. In 2020 we were purchased by the Silicon Valley tech company, Doximity.\r\n\r\nSince the acquisition, we have been moving at 200 miles an hour, combining the people side of the business with technology to do healthcare staffing in a different way.\r\n\r\nCurative finds incredible talent with less hassle using better data. We combine the heart and hard work of experienced recruiters with the intelligent technology of Doximity, the world’s largest professional medical network. The result: the commitment and ability to find people who care.

Job DescriptionDescription: At JDH and each of our subsidiaries, we know that agriculture is about more than moving commodities—it’s about connecting people and building relationships that matter. Founded in 1886 and proudly family-owned for five generations, our deep roots in the industry enable us to manage grains, co-products, animal feed, and feed ingredients effectively. With an extensive transportation network, we connect supply and demand across the U.S., Canada, Mexico, and Asia. We are committed to delivering reliability, value, and innovation, while providing a supportive and safe workplace where our team can thrive and grow. Job Summary: The Inside Sales Representative is responsible for processing, entering, monitoring, managing, and selling ingredients to dairies and feed yards. This role involves order management, customer service, and proactive sales efforts to maintain competitive pricing and relationships with customers. Essential Duties and Responsibilities: • Sell ingredients to customers, manage contracts, and communicate sales details., • Call on customers to gather market information and maintain competitive pricing., • Support team members by relaying daily commodity pricing updates., • Communicate order entry for assigned accounts, ensuring accuracy in pricing and logistics., • Address customer service issues, including complaints, account reconciliations, and product concerns., • Monitor and communicate contract balances with customers., • Assist with paperwork processing, cancellations, and voids as needed., • Provide coverage for other accounts when necessary., • Drive a culture of safety, accountability, opportunistic curiosity, and contributes to creating an environment where people want to work., • Other duties as assigned.Requirements:, • Bachelor’s Degree and/or equivalent experience required., • 2-3 years of related sales experience preferred., • Proficiency in Microsoft Suite (Outlook, Microsoft Excel, and Word)., • Strong communication skills and ability to work with customers and team members., • Frequent sitting, use of computer, communication via telephone, • Ability to navigate an office environment., • Regular and predictable attendance in office or site location., • Job may require occasional travel within the United States.

Job Description Chiropractor – Full Time Location: Amarillo, Texas A better way to deliver care starts here! The Joint Chiropractic is revolutionizing access to care by delivering high-quality, affordable chiropractic services in a convenient retail setting. As the largest operator, manager, and franchisor of chiropractic clinics in the U.S., The Joint delivers more than 12 million patient visits annually across nearly 1,000 locations. Recognized by Forbes, Fortune, and Franchise Times, we are leading a movement to make wellness care more accessible to all. Position Summary The Joint Chiropractic is seeking a dedicated and motivated Chiropractor to join our growing team. This full-time role focuses on delivering exceptional patient care in a supportive, streamlined environment, allowing you to focus on what you do best, improving lives through routine chiropractic care. Key Responsibilities • Consult with patients by reviewing health and medical histories, examining, and evaluating neuromusculoskeletal systems, • Perform manual adjustments to the spine and other joints to correct musculoskeletal conditions, • Educate patients on the benefits of routine chiropractic care and recommend treatment plans, • Maintain accurate and timely patient records, • Arrange for diagnostic imaging when medically necessary and analyze results, • Build positive doctor-patient relationships, • Doctor of Chiropractic (D.C.) degree from an accredited chiropractic college, • Valid DC license in the applicable state, • Passing scores for NBCE Parts I–IV (or recent SPEC exam), • Eligible for malpractice insurance This role requires availability up to 40 hours a week. Compensation and Benefits • Starting Base Pay: $75,000 to $95,000 depending on experience, • Bonus potential: $5,000 to $10,000 annually, • 4-5 day workweek with 2-3 days off in a row, • Medical, dental, and vision insurance, • PTO accrual, • Company-paid malpractice insurance, • License renewal reimbursement Business Structure You are applying to work with a franchisee of The Joint Corp. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set their own terms of employment, including wage and benefit programs, which may vary. Ready to Join the Movement? Apply today and start moving your career in the direction you want. For more information, visit , or follow the brand on Facebook, Instagram, Twitter, YouTube and LinkedIn. Powered by JazzHR AI6Zf9YIjl

Job DescriptionCompany Description Our mission To recognize, appreciate, value, and utilize the unique talents and contributions of all individuals. To create an environment where all Team Members, because of their differences, can reach their highest potential. Our Purpose Domino’s is a Purpose-Inspired and Performance-Driven company with Exceptional People committed to Feed the Power of Possible One Pizza at a Time What We Believe Do the Right Thing Put People First Create Inspired Solutions Champion Our Customers Grow and Win Together How Will We Win Dominant #1 Double Down on Carryout Provide Best-In-Class Delivery Service Maintain Strongest Enterprise Profitability Protect Business from Risk Support a Foundation built by Great People and the Work They Do Every Day How Do We Work Leadership of Self Leadership of Others Job Description Join our dynamic team as a Crew Member (06382) in Amarillo, United States! We're looking for enthusiastic individuals to contribute to our fast-paced and customer-focused environment. As a Crew Member, you'll play a crucial role in ensuring smooth operations and delivering exceptional service to our valued customers. • Operate various equipment efficiently and safely, • Manage stock by moving ingredients from delivery areas to appropriate storage locations, • Prepare food products according to company standards and recipes, • Handle customer orders via phone and in-person with a friendly and professional demeanor, • Conduct inventory counts and complete associated paperwork accurately, • Maintain cleanliness of equipment and facility through daily cleaning tasks, • Process orders using computer systems and point-of-sale terminals, • Collaborate with team members to ensure seamless operations during shifts, • Adhere to all safety and quality control standards, • Adapt to changing priorities and maintain a positive attitude in a fast-paced environmentQualifications, • Must be {AGE} of age or older, • Ability to operate various types of restaurant equipment safely and efficiently, • Strong customer service skills with experience in both phone and face-to-face interactions, • Basic math skills for cash handling and making correct change, • Proficiency in using computer systems, including keyboard and touch screen interfaces, • Physical abilities including motor coordination, near and mid-range vision, and depth perception, • Excellent time management and organizational skills, • Team-oriented mindset with the ability to work collaboratively in a fast-paced environment, • Keen attention to detail, particularly in food preparation and inventory management, • Flexibility to work various shifts as needed, • Strong communication skills, both verbal and written, • Ability to multitask and prioritize responsibilities effectively, • Willingness to learn and adapt to new processes and procedures Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionCompany Description Our mission To recognize, appreciate, value, and utilize the unique talents and contributions of all individuals. To create an environment where all Team Members, because of their differences, can reach their highest potential. Our Purpose Domino’s is a Purpose-Inspired and Performance-Driven company with Exceptional People committed to Feed the Power of Possible One Pizza at a Time What We Believe Do the Right Thing Put People First Create Inspired Solutions Champion Our Customers Grow and Win Together How Will We Win Dominant #1 Double Down on Carryout Provide Best-In-Class Delivery Service Maintain Strongest Enterprise Profitability Protect Business from Risk Support a Foundation built by Great People and the Work They Do Every Day How Do We Work Leadership of Self Leadership of Others Job Description Join our dynamic team as a Crew Member (06382) in Amarillo, United States! We're looking for enthusiastic individuals to contribute to our fast-paced and customer-focused environment. As a Crew Member, you'll play a crucial role in ensuring smooth operations and delivering exceptional service to our valued customers. • Operate various equipment efficiently and safely, • Manage stock by moving ingredients from delivery areas to appropriate storage locations, • Prepare food products according to company standards and recipes, • Handle customer orders via phone and in-person with a friendly and professional demeanor, • Conduct inventory counts and complete associated paperwork accurately, • Maintain cleanliness of equipment and facility through daily cleaning tasks, • Process orders using computer systems and point-of-sale terminals, • Collaborate with team members to ensure seamless operations during shifts, • Adhere to all safety and quality control standards, • Adapt to changing priorities and maintain a positive attitude in a fast-paced environmentQualifications, • Must be {AGE} of age or older, • Ability to operate various types of restaurant equipment safely and efficiently, • Strong customer service skills with experience in both phone and face-to-face interactions, • Basic math skills for cash handling and making correct change, • Proficiency in using computer systems, including keyboard and touch screen interfaces, • Physical abilities including motor coordination, near and mid-range vision, and depth perception, • Excellent time management and organizational skills, • Team-oriented mindset with the ability to work collaboratively in a fast-paced environment, • Keen attention to detail, particularly in food preparation and inventory management, • Flexibility to work various shifts as needed, • Strong communication skills, both verbal and written, • Ability to multitask and prioritize responsibilities effectively, • Willingness to learn and adapt to new processes and procedures Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionCompany Description Our mission To recognize, appreciate, value, and utilize the unique talents and contributions of all individuals. To create an environment where all Team Members, because of their differences, can reach their highest potential. Our Purpose Domino’s is a Purpose-Inspired and Performance-Driven company with Exceptional People committed to Feed the Power of Possible One Pizza at a Time What We Believe Do the Right Thing Put People First Create Inspired Solutions Champion Our Customers Grow and Win Together How Will We Win Dominant #1 Double Down on Carryout Provide Best-In-Class Delivery Service Maintain Strongest Enterprise Profitability Protect Business from Risk Support a Foundation built by Great People and the Work They Do Every Day How Do We Work Leadership of Self Leadership of Others Job Description Join our dynamic team as a Crew Member (06382) in Amarillo, United States! We're looking for enthusiastic individuals to contribute to our fast-paced and customer-focused environment. As a Crew Member, you'll play a crucial role in ensuring smooth operations and delivering exceptional service to our valued customers. • Operate various equipment efficiently and safely, • Manage stock by moving ingredients from delivery areas to appropriate storage locations, • Prepare food products according to company standards and recipes, • Handle customer orders via phone and in-person with a friendly and professional demeanor, • Conduct inventory counts and complete associated paperwork accurately, • Maintain cleanliness of equipment and facility through daily cleaning tasks, • Process orders using computer systems and point-of-sale terminals, • Collaborate with team members to ensure seamless operations during shifts, • Adhere to all safety and quality control standards, • Adapt to changing priorities and maintain a positive attitude in a fast-paced environmentQualifications, • Must be {AGE} of age or older, • Ability to operate various types of restaurant equipment safely and efficiently, • Strong customer service skills with experience in both phone and face-to-face interactions, • Basic math skills for cash handling and making correct change, • Proficiency in using computer systems, including keyboard and touch screen interfaces, • Physical abilities including motor coordination, near and mid-range vision, and depth perception, • Excellent time management and organizational skills, • Team-oriented mindset with the ability to work collaboratively in a fast-paced environment, • Keen attention to detail, particularly in food preparation and inventory management, • Flexibility to work various shifts as needed, • Strong communication skills, both verbal and written, • Ability to multitask and prioritize responsibilities effectively, • Willingness to learn and adapt to new processes and procedures Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description iParametrics partners with leading organizations across the U.S., and Internationally, to support high-impact programs in construction, engineering, disaster recovery, and emergency management. Our nationwide reach and proven expertise help deliver results that matter. From federal programs to private-sector initiatives, we provide specialized talent and operational expertise that keep complex projects moving and missions on track. Project Overview iParametrics is seeking a Project Engineer to support a hyper-scale data center construction project near Amarillo, Texas. This role is fully site-based and will serve as a critical member of the on-site engineering team, coordinating technical and administrative project functions. The Project Engineer will collaborate with area managers, subcontractors, design teams, and client representatives to resolve field coordination issues, ensure constructability, and drive progress toward project milestones. Role’s Responsibilities * Support area managers and subcontractors by facilitating resolution of field coordination issues. * Review and interpret design drawings, construction documents, and technical manuals. * Coordinate civil, structural, and architectural (CSA) systems across project scope. * Process and cross-check shop drawings, product data, and submittals for compatibility and constructability. * Generate and manage Requests for Information (RFIs). * Distribute change documents, field directives, and bulletins. * Assist in BIM coordination, clash detection, and resolution. * Participate in quality assurance, pre-functional testing, commissioning, and turnover activities. * Provide technical field support including layout verification, sequencing, and as-built documentation. * Collaborate closely with MEP engineers to ensure integration with CSA systems. * Facilitate client training on operation and maintenance of CSA systems. Must Have Qualifications * Experience: Minimum 3 years of project engineering experience in commercial construction (hyperscale data center or mission-critical project experience strongly preferred). * Education: High School diploma or GED required. Bachelor’s degree in Civil, Mechanical, Electrical, Structural Engineering, Construction Management, or equivalent; or equivalent craft-level experience. * Technical Skills: Strong knowledge of construction means and methods, trade sequencing, and commissioning workflows. * Software Knowledge: * Project management tools: Prolog, Procore, E-Builder, Bluebeam, Microsoft Project, Primavera P6. * Design tools: AutoCAD, Revit, Navisworks. * Microsoft Office 365 (Word, Excel, PowerPoint, Outlook, Teams). * Skill: Ability to organize and analyze technical data effectively; familiarity with CSI MasterFormat. * Skill: Strong communication, time management, and collaboration abilities in a fast-paced environment. * Work Conditions: Ability to work outdoors in varying weather, climb ladders/scaffolding, inspect confined spaces, and lift up to 50 lbs. Flexible to work extended/off-shift hours as needed. * Other: Must hold a valid driver’s license and pass a company drug and alcohol test. Preferred Qualifications * Prior experience supporting large-scale, fast-paced projects in advanced technology or federal/military environments. * Familiarity with hyperscale data center workflows, commissioning, and turnover processes. * Training in survey theory and techniques. * Experience leading client training on O&M systems. Join iParametrics’ National Response & Project Support Network At iParametrics, we connect talented professionals with high-impact projects that make a difference—whether it’s supporting federal initiatives, advancing major infrastructure programs, or responding to critical emergencies. By joining our roster network, you’ll be first in line for future opportunities that match your expertise, availability, and interests. Our team is committed to building lasting relationships with our roster members, keeping you informed, and helping you navigate each step from interest to deployment. ???? Why Join iParametrics? For over 20 years, iParametrics has been trusted to deliver mission-critical solutions that safeguard national security, strengthen infrastructure, and support emergency management. Our work spans all 50 states, U.S. territories, and 39 countries—partnering with federal agencies and private sector leaders to take on projects that matter. ???? Perks & Benefits * ???? Comprehensive Coverage – Medical, dental, and vision plans * ???? Retirement Savings – 401(k) with company match * ???? Time to Recharge – Paid time off and holidays * ???? Competitive Pay – Bi-weekly salary, based on experience Founded in 2003 and headquartered in metro Atlanta, Georgia, we have team members and project offices nationwide. Our culture values adaptability, expertise, and collaboration—giving you the tools, opportunities, and support to make a lasting impact. iParametrics is an Equal Opportunity Employer. We are committed to a work environment that supports and respects all individuals without discrimination based on race, color, religion, national origin, age, sex, pregnancy, marital status, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Application review will consider without limitation the following criteria: qualifications, education, and experience specific to the job description/duties as well as prior experience with leading construction companies. Applicants must be able to pass the iParametrics Drug and Alcohol test. This job description is intended to outline the general nature and level of work that would be performed by project team members. It is not designed to cover or contain a comprehensive list of all responsibilities, duties, or skills required for this job. This description is subject to change at the discretion of the company, with or without notice.

Job Description iParametrics partners with leading organizations across the U.S., and Internationally, to support high-impact programs in construction, engineering, disaster recovery, and emergency management. Our nationwide reach and proven expertise help deliver results that matter. From federal programs to private-sector initiatives, we provide specialized talent and operational expertise that keep complex projects moving and missions on track. Project Overview We are seeking an Offsite Manufacturing (OSM) Field Superintendent to oversee OSM construction activities at a major project site. This role reports to the Project Superintendent and OSM Lead(s), working closely with other superintendents, subcontractors, and craft workers to ensure successful delivery of complex OSM scopes. These scopes involve prefabricated 3D structural modules integrated with mechanical, plumbing, process, and electrical (MP&E) systems. The position ensures safety, quality, and schedule adherence from project initiation through completion. Role’s Responsibilities * Coordinate daily activities with other superintendents, mechanical subcontractors, and other discipline subcontractors * Supervise multiple subcontractors and craft employees * Maintain and adjust project schedules on a daily basis * Manage RFIs and submittals for client/architect review (shared with OSM Project Engineer/Construction Manager) * Implement and oversee QA/QC programs for OSM scopes * Enforce and promote all safety protocols * Resolve design and constructability issues in the field * Respond to client requests and develop solutions using technical expertise * Interpret and ensure compliance with permits, codes, and site specifications * Provide field condition data and scope details for cost estimating support * Oversee contractor performance to ensure compliance with contractual requirements * Assist in managing field crew staffing, headcount, and competency with OSM trade partners * Build and maintain strong relationships with clients, architects, engineers, consultants, and subcontractors Must Have Qualifications * Experience: Minimum five (5) years of hands-on mechanical/multidiscipline construction experience (required) * Experience: Previous work on large industrial or high-tech fabrication projects (preferred) * Experience: High-purity chemical and gas systems experience (strongly preferred) * Certification: OSHA 30 (required; may be obtained after hire) * Education: High school diploma or GED (required); bachelor’s degree in engineering, construction management, or related field (preferred) * Knowledge: Materials and methods of mechanical construction * Software: Proficiency in Microsoft Office 365 (Excel, Word, Outlook, PowerPoint, Teams, etc.) and familiarity with network-based systems * Software: Project management tools such as Prolog, Procore, E-Builder, Bluebeam, Microsoft Project, Primavera P6 * Software (Preferred): AutoCAD, Revit (optional), Navisworks (preferred) * Skills: Ability to read/interpret design and construction documents (2D/3D), specifications, and survey data; understanding of CSI specification system * Skills: Strong knowledge of mechanical installations for large equipment and cleanroom environments * Skills: Excellent written and verbal communication; proven ability to work across trades and departments Preferred Qualifications * Bachelor’s degree in engineering, construction management, or related field * Experience with modular/offsite manufacturing construction methods * Familiarity with design coordination in BIM-heavy environments Join iParametrics’ National Response & Project Support Network At iParametrics, we connect talented professionals with high-impact projects that make a difference—whether it’s supporting federal initiatives, advancing major infrastructure programs, or responding to critical emergencies. By joining our roster network, you’ll be first in line for future opportunities that match your expertise, availability, and interests. Our team is committed to building lasting relationships with our roster members, keeping you informed, and helping you navigate each step from interest to deployment. ???? Why Join iParametrics? For over 20 years, iParametrics has been trusted to deliver mission-critical solutions that safeguard national security, strengthen infrastructure, and support emergency management. Our work spans all 50 states, U.S. territories, and 39 countries—partnering with federal agencies and private sector leaders to take on projects that matter. ???? Perks & Benefits: * ???? Comprehensive Coverage – Medical, dental, and vision plans * ???? Retirement Savings – 401(k) with company match * ???? Time to Recharge – Paid time off and holidays * ???? Competitive Pay – Bi-weekly salary, based on experience iParametrics is an Equal Opportunity Employer. We are committed to a work environment that supports and respects all individuals without discrimination based on race, color, religion, national origin, age, sex, pregnancy, marital status, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescription: Join Our Team at Exceptional Emergency Center – Amarillo/Lubbock Region! Locations: Amarillo/Lubbock Are you looking for an exciting career in emergency medicine? Exceptional Emergency Center offers a dynamic, fast-paced work environment with top-tier benefits, competitive pay, and amazing incentives! Join a team that values compassion, excellence, and teamwork while providing high-quality emergency care to the Amarillo/Lubbock community. Why Work with Us? • Competitive Pay & Shift Differentials, • Sign-On & Retention Bonuses, • Flexible Scheduling Options, • Comprehensive Benefits & 401(k) Matching The Radiology Technologist will operate radiographic equipment to produce radiographs of the body for diagnostic purposes, as directed by the ER Physician by the Radiologist accepted protocol. The technologist will also be proficient in the positioning of the patient and the examining table to obtain optimum views of the specified area of the body requested by physician. Technologist will also practice radiation safety techniques with the ALARA principle in mind, using beam restrictive devices, patient shielding skills, and knowledge of applicable exposure factors, to maximize radiation protection to patient and staff. Each technologist will operate CT SCAN equipment to produce Computed Tomography (CT scans) of the body for diagnostic purposes, as directed by the ER Physician in accordance with the Radiologist protocol. Technologist will be responsible for administering and consenting for contrast both IV and oral, while being aware of all possible reactions and side effects. The Technologist will also be responsible for filling out appropriate paperwork and ensuring proper documentation in patients' chart. Our Primary goal is to ensure patient safety and satisfaction, while acquiring an acceptable exam of diagnostic quality. Essential Duties and Responsibilities • Maintains awareness of all departmental and operational policies of NEC., • Assists in the maintenance of all equipment in the department, including cleaning and QA procedures., • Explains to Patients the benefits and risks of Procedures and Exams., • Prepares Patient as necessary for examination, i.e.: contrast, proper IV placements, checking labs., • Facilitates departmental operations through completion of all appropriate Contrast, Extravasations, Pregnancy, and other forms related to preformed exam., • Maintains safety precautions to minimize radiation exposure to patients, other personnel, and self., • Maintains current knowledge of Diagnostic Radiology /CT procedures performed in the Radiology Department., • Possesses basic knowledge of anatomy and physiology required to apply principles of radiology and methods of exposure to obtain Diagnostic quality images., • Possesses basic knowledge of radiology/CT equipment functioning to provide for minor repair and trouble-shooting for problems., • Proficient in the utilization of all radiological/lab equipment of the ER., • Utilizes appropriate body mechanics in moving/lifting patients and equipment to prevent injury to patients and to self., • Applies principles of radiology safety in the performance of position responsibilities., • Maintains awareness of own limitations and seeks guidance from appropriate personnel when needed., • Ensures that problems/concerns regarding activities in the department are communicated with appropriate personnel., • Provides safe transportation of patients to and from the patient care unit., • Maintains awareness of all departmental and operational policies of NEC. Requirements: Qualifications • Graduate of an accredited approved school of Radiologic Technology, • Ability to read and comprehend simple instructions, short correspondence, and memos., • Ability to write simple correspondence., • Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization, • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to compute rate, ratio, and percent and to draw and interpret bar graphs, • Registered with the American Registry of Radiologic Technologists, • Current State licensure, • Current BCLS Certification Texas Requirements: ARRT (R) (CT) and TDH/TMB Colorado and Rhode Island Requirements: ARRT (R) (CT)

Job Description Certified Group is committed to delivering expert solutions and quality testing our customers can feel confident in – on time, every time – so the world can trust in what it consumes. As a leading North American provider of laboratory testing, regulatory consulting, and certification & audit services, Certified Group includes Food Safety Net Services (FSNS), FSNS Certification & Audit, Certified Laboratories, EAS Consulting Group, and Labstat International Inc. Certified Group provides analytical testing and regulatory guidance services in the food & beverage, dietary supplements & NHP, cosmetics, OTC, personal care, tobacco, nicotine, cannabis, and hemp industries. We have embarked on an important journey to unify and strengthen our culture by living these core values: Start with the Customer, Drive to Deliver, Commit to Safety and Quality, and Believe in the Team — including believing in you. We are currently looking for a Driver/Courier to join our growing team! JOB SUMMARY Responsible for the safe and efficient delivery of food samples to our laboratory testing facility. The courier will provide exceptional customer services to clients of the company while operating a company vehicle to deliver and pick up test samples at customer sites. ESSENTIAL RESPONSIBILITIES • Responsible for assisting with maintenance of a company facility according to established schedules, • Must follow the Company Driving Policy, as well as all applicable state and federal driving laws., • Adhere to proper accident reporting procedures according to company policy, • Provide Excellent Customer Service Satisfaction at the point of pick-up, • Ensure safe and timely transport of the food products to our laboratory, • Responsible for operating the vehicle in a safe manner and to drive defensively to prevent injuries and property damage, • Work closely with the laboratory management and staff, • Drive vehicles with reasonable prudence to conserve fuel and sustain them at the highest operating efficiency, • Present the vehicle for repair, service, or adjustment whenever such is needed, and preventative maintenance when time is due, • Perform all activities in a neat, safe, hygienic, and efficient manner, • Assisting with managing priorities and schedule such that individual goals as well as team goals are achieved with encouraged participation in the Food Safety Net Services Team, • Complete assigned FDA Collections and Photo Report for samples collected from warehouses/freezers, • Responsible for the safety of oneself and others working within their area, • High School diploma or G.E.D, • 2 years of professional driving experience preferred, • Training in general laboratory practices, • Will have a current, valid driver's license issued in the State of operation, • A driving record with no DUIs or major moving violations or accidents within the past 60 months, • Demonstrated professionalism, dependability and initiative in prior work experience The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Regularly required to stand, sit, walk, use hands and arms, talk and hear, • Regularly lifts items up to 55 pounds, • Color vision and depth perception, • Potential exposure to odors, fumes, airborne particles, hazardous chemicals, and microbiological pathogens, • Noise level varies from quiet to loud, • Temperature varies from hot to cold, • Progressive 401k Retirement Savings Plan, • Employer Paid Short- Term and Long-Term Disability, and Life Insurance, • Group Medical, • Tuition Reimbursement, • Flexible Spending Accounts, • Dental, • Paid Holidays and Time Off, • Many positions which qualify for the company bonus program Certified Group values diversity in its workforce. The company is firmly committed to a policy of Equal Opportunity and will administer its policies in a manner that treats each employee and applicant for employment on the basis of merit. Certified Group will take affirmative action to seek out qualified applicants without regard to race, color, religion, sex, national origin, age, handicap, or veteran status.

Target - 8201 I-40 W [Retail Sales / Team Member] As a Front of Store Attendant at Target, you'll: Accurately handle cash register operations; Scan, handle and move merchandise efficiently and safely, including frequently lifting or moving merchandise up to 40 pounds; Resolve guest questions quickly

Job Description Job Title: Merchandiser – Retail Garden Centers Department: Retail Sales Service Reports to: Sales Manager FLSA Status: Non-exempt Revision: 01/10/2025 This job is onsite. Summary: Do you love working outdoors and have a passion for plants? Join Altman Plants, the industry leader in Garden Center service and innovation! We are looking for enthusiastic Merchandisers to work in big box retail stores, handling live plants shipped on delivery racks. This role offers the chance to enjoy beautiful spring weather while also embracing the unique challenges of hot, cold, and varied seasonal conditions. We can provide some flexible scheduling options around our scheduling needs, allowing you to balance work with your personal life. Key Responsibilities: • Stock and display fresh plant material in garden centers., • Unload plants from delivery racks and set up displays., • Maintain a sales-ready appearance for all plants and displays., • Cull and dispose of non-sellable plants., • Perform inventory cycle counts and adjustments., • Assist with resets, building displays, and special events., • Keep work areas clean and safe., • Use tools such as pallet jacks, pruners, ladders, and more., • Adhere to company policies and safety guidelines., • Work and communicate cooperatively with coworkers, vendors and retail associates., • Positive attitude and teamwork skills., • Attention to detail and problem-solving abilities., • Ability to lift and move up to 50 pounds frequently., • Comfortable working in various weather conditions., • Reliable transportation to and from assigned stores., • Proficiency with mobile apps for clocking in/out and task completion. Physical Demands: • Frequent standing, walking, carrying, pushing, and pulling., • Ability to lift up to 50 pounds regularly and occasionally up to 100 pounds with assistance., • Outdoor work in various weather conditions (heat, cold, rain, etc.)., • Exposure to dust, soil, and moving mechanical parts.

Job Description The Yard Maintenance team ensures and maintains the overall functionality of the feedyard. Yard Maintenance ensures the day to day maintenance and repair of the entire feedyard facility. They will work closely with the Yard Maintenance Manager to identify and develop a maintenance schedule to support working best practices that promote preventative maintenance practices. Yard Maintenance works closely with all feedyard departments, as an individual and as a team member, to establish the highest quality care and maintenance of the feedyard to ensure the welfare of livestock while contributing to the overall success of the feedyard team. Roles and Tasks • Responsible for feedyard layout and the construction of yard construction and improvements, • Perform the repair and maintenance of watering systems, fences, equipment maintenance, yard signage, vehicle maintenance, • Continual observance and adherence of all safety policies and procedures, • Promote, support, and participate in all company policies, procedures and programs, • Other duties and job assignments are necessary for feedyard effectiveness, • Maintains and repairs road surfaces, bunk pads, pens and alleys by filling in holes, and removing accumulated waste and debris., • Ensures the operation of equipment by recording and completing servicing requirements specified by equipment need and yard maintenance schedule to establish procedures that support preventative maintenance practices, including: fueling, checking fluid levels, checking filters, greasing, and cleaning equipment., • Identifies and communicates with the Yard Maintenance Manager all maintenance and general cleanliness associated with the proper function of the yard., • Moving machinery, industrial equipment, vehicular and livestock traffic, • Physical Requirements Include: standing, walking, lifting, bending, kneeling, shoveling, and operating equipment and heavy machinery., • Considerable exposure to weather such as: rain, sleet, snow, hail, heat, cold, wind, and dust, • Daily close proximity to livestock Friona Industries participates in E-Verify. We will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS) with information from each new employer’s Form I-9 to confirm work authorization. Powered by JazzHR Dc1YZveD3K

Job Description Job Description Vision Truck Line an Equal Employment Opportunity employer (EEO) Over-the-Road Flatbed Position - Pay $1,500 ~ $1,600/week - Sign on Bonus $5,000 - Out on the Road for 2/3 weeks & 2 days home with your Family MUST HAVE A MINIMUM 6 MONTH FLATBED EXPERIENCE & AT LEASE 1 YEAR OF O.T.R EXPERIENCE TO QUALIFY 27% of the Load 40% to 50% of the loads require tarping Detention Pay Transmission Type: Automatics Drug Test: Urine Vision Drivers Enjoy Great Benefits Health, Dental and Vision Long and Short-Term disability 401k Life Insurance Paid Vacation Call Anthony 404-300-9003 Job Requirements: • Minimum 1 year driving experience with 6 months of Flatbed experience, • Moving Violations are on a point system, • No DUI/DWI’s in the last 5 years, • Automatic DQ’s: recent at fault rollover in the past year & No failed D.O.T alcohol/drug test lifetime, • Felony convictions will review, cannot hire drivers with any pending case the last 5 years, • MUST HAVE TARPING EXPERIENCE Vision Truck Line LLC is a licensed contract carrier and property broker as defined by the Federal Motor Carrier Administration and the United States Department of Transportation. Headquartered in Conley, GA 30288 contracted throughout the continental United States. Our company has maintained late model fleets of tractor and trailers equipment with GPS tracking and Air Resources Board compliant devices. The entirety of this site is protected by copyright 2025 VisionTruckLine.com

As a Walgreens Pharmacy Technician or Pharmacy Technician Apprentice, you'll be front and center – interacting with our customers and developing strong patient relationships. Our pharmacy technician positions have undergone an exciting transformation, moving from a transaction-based environment to

Job Description Job Description Vision Truck Line an Equal Employment Opportunity employer (EEO) Compensation: $1300 to $1500 per week Home Weekly - ( Out for 5 days & home for 2 days - days off: Tues/Wed or Wed/Thurs) Drug Test: Hair Follicle Vision Drivers Enjoy Great Benefits Health, Dental and Vision Long and Short-Term disability 401k Life Insurance Paid Vacation Call Anthony 404-300-9003 Job Requirements: • Minimum 6 months driving experience Regional or O.T.R., • Moving Violations are on a point system, • No DUI/DWI’s in the last 5 years, • Automatic DQ’s: recent at fault rollover in the past year & No failed D.O.T alcohol/drug test lifetime, • NO FELONIES or MISDEMEANOR EVER - NO ACCEPTATION Vision Truck Line LLC is a licensed contract carrier and property broker as defined by the Federal Motor Carrier Administration and the United States Department of Transportation. Headquartered in Conley, GA 30288 contracted throughout the continental United States. Our company has maintained late model fleets of tractor and trailers equipment with GPS tracking and Air Resources Board compliant devices. The entirety of this site is protected by copyright 2025 VisionTruckLine.com

Job DescriptionDescription: VETERANS ARE ENCOURAGED TO APPLY Lonestar Electric Supply is seeking a highly motivated and skilled Warehouse Delivery Driver to join our rapidly growing team. In this role, you will be responsible for timely delivery of our products to our customers, as well as maintaining a clean and organized warehouse. The ideal candidate will also have a strong desire to provide superior Customer Service to exceed customer goals and expectations and follow our passion to MAKE IT HAPPEN. Responsibilities: • Safely operate and maintain delivery vehicles, ensuring timely and accurate delivery of products to customers., • Assist in loading and unloading of products from delivery vehicles., • Maintain accurate delivery logs and documentation., • Ensure all products are properly secured and protected during transportation., • Perform routine maintenance on delivery vehicles, including checking fluid levels, tire pressure, and general cleanliness., • Assist in the organization and maintenance of the warehouse, including receiving, stocking, and shelving of products., • Maintain a clean and safe working environment in accordance with company policies and procedures., • Ensure compliance with all safety regulations and traffic laws., • Provide excellent customer service, including timely and professional communication with customers., • Other duties as assigned. Qualifications: • High school diploma or equivalent., • Valid driver's license and clean driving record., • Minimum 2 years of experience in commercial driving and delivery., • Strong attention to detail and organizational skills., • Ability to work independently with minimal supervision., • Strong communication and customer service skills., • Familiarity with GPS navigation systems and delivery logistics software is a plus. Physical Requirements: • Occasionally works around moving mechanical parts and in warehouse conditions that are not always climate controlled and may include, heat and humidity., • Noise level may be loud at times., • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue. Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina., • Lifting up to 50 lbs. may be required infrequently., • Medical, dental, life and vision insurance, • 401(k) Retirement Plan and Match, • Paid Time Off This job description is a general outline of the day-to-day duties to be expected and may not cover all job responsibilities that may be assigned by management. Requirements:

Job DescriptionCDL A Regional Truck Drivers – Amarillo, TX Earn 50–70 CPM • $1,200–$1,600 Weekly • Weekly Home Resets At Imacc Logistics, we make trucking simple. Drivers within a 100-mile radius of Amarillo, Texas (79101) can run steady regional freight with predictable schedules, strong pay, and no wasted time. Whether you're a new CDL graduate, an experienced truck driver, or coming from a warehouse or forklift job, this lane is built to get you moving. The Pay You'll earn fifty to seventy cents per mile depending on verified CDL experience. Weekly averages run $1,200 to $1,600, with steady miles available. We also include detention pay and layover pay so every hour on the job is respected. The Freight This lane moves dry goods and general freight, all dedicated customer loads. Drivers never load or unload - it's 100% no touch freight. Most trailers are preloaded and ready, so you can focus on hauling instead of waiting on docks. With one to three loads daily, the rhythm is predictable, and the freight keeps you busy. The Schedule Drivers are typically out five days with weekly two-day resets at home. Because this is regional trucking, you'll stay close to home while running consistent miles. We work to keep schedules steady, so you know what to expect each week. Why This Lane Works Many of our drivers came from warehouse and dock jobs - forklift operators, dock hands, and material movers who wanted a career that pays more for the same hustle. If you're new to trucking, this lane gives you the chance to learn without being thrown into coast-to-coast chaos. If you're an experienced CDL A driver, you'll enjoy higher CPM, an assigned tractor, and consistent runs. Teams are also welcome for those looking to maximize miles and paychecks. Equipment & Support * Assigned tractors - no swapping trucks * Newer equipment with APUs and inverters for comfort * 24/7 dispatch support to keep freight moving and drivers backed up * Option to take your truck home during resets Driver Requirements * Valid Class A CDL * Safe driving record with no major violations in the last 12 months * Able to pass a DOT physical and road test * Solid work history - warehouse, forklift, or trucking all count * Comfortable communicating in English for safety and customer service At Imacc Logistics, every mile is backed by pay, predictable schedules, and respect for the driver. Apply today and step into a lane that rewards your effort and gets you home each week. Call us @ 771-717-7185 Job Posted by ApplicantPro

Come for a job and stay for a career! Federal Express Corporation (FEC) is part of the rapidly growing warehouse and transportation sector that helps keep America, and our economy, moving. Fast paced and physical warehouse work why pay for a gym membership when you can get paid while working out?.

Job DescriptionDescription: Job Summary The Surgery Scheduler is responsible for all aspects of the surgical scheduling process, including surgeries, in-office procedures, follow up appointments and appropriate medical clearance. Duties and Responsibilities • Schedules patients for surgery and completes necessary paperwork, • Confirms patient demographics , surgery date and time and medical diagnosis, • Reviews instructions with patients prior to surgeries, including medications, allergies, labs, health history, pre-op and post-op treatment plans, • Gathers insurance information to confirm coverage and benefits, • Ensures all paperwork is complete and on file for patients’ surgeries, including consent forms, • Answers and responds to all incoming telephone inquiries regarding surgery, • Schedules patients for follow-up appointments and other health assessments, • Monitors surgery schedule and works directly with physicians to coordinate appointments, • Coordinates medical clearance when necessary, • Has regular and predictable attendance, • Adheres to all Advanced Pain Care policies and procedures, • Clear and precise communication, • Accuracy and attention to detail, • Effectively manages day by organizing and prioritizing, • Applies tactful principles and practices of dealing with the public, • Practices safety habits, • Protects patient information and maintains confidentiality, • Knowledge of general medical terminology, CPT codes, medical insurance and managed care, • Knowledge of insurance verification and surgical procedures, • Computer and EMR knowledge, • Strong written and verbal communication skills, • Excellent interpersonal/customer service skills, • High degree of professionalism, tact and diplomacy Requires a high school diploma or equivalent; one year of prior surgery scheduling experience in a healthcare setting highly preferred. Knowledge of Electronic Medical Records, insurance verification, medical terminology and surgical procedures. Outstanding customer service and communication skills a must. Working Conditions Environmental Conditions: • Must be able to work as scheduled- typically Monday thru Friday 8:00am-5:00pm, • Must be able to sit and/or stand for prolonged period of time, • Duties involve moving materials, weighing up to 30 lbs.

Get your team into its own truck with no money down, no minimum credit requirement and flexible financing options. We'll support you and your co-driver on your path to truck ownership while providing the resources you need to stay as busy as you choose. Keep moving - and earning - together with Panther. Exclusive to Teams Work for yourselves, see the country and set your own schedule. Through our exclusive lease purchase program with Expediter Services, you'll discover how easy purchasing a new tractor can be for your team. Payments are deducted from your weekly settlement for the specified term and then the tractor is yours. • No money down, • No minimum credit requirements, • No balloon payment, • Flexible finance options, • Actual lease is through Expediter Services, • Earn top pay for safe, precise, on-time delivery, and stay as busy as you want., • Set your own schedule, • 99% no-touch, high-value expedite freight, • Weekly settlements, • Access to our driver support team 24/7/365, • We provide a fuel surcharge along with your standard rate per shipment, • CDL-A + 6 months minimum experience*, • At least 21 years of age, • No DUI or drug convictions in the last 5 years, • No felonies in the last 10 years, • No experience necessary for straight trucks or cargo vans, • ** All drivers and vehicle owners are independent contractors.

Job Description CDL A Hazmat Tanker Driver – Night Shift Average Pay: $80,000 to $90,000 a Year Home Daily | Good People | Solid Equipment If you like quiet highways, cooler temps, and less traffic, nights are your time to shine. We're looking for a driver who wants steady work, a good team, solid pay, and a good work/life balance. This is a night shift, slip-seat position in Amarillo, TX hauling fuel like gasoline and diesel. If you can work hard, drive safe, and be part of a team that actually likes each other, we want to meet you. What You'll Get: Pay and Schedule • Average pay between 80 and 90k., • Compensation based on experience, • Hourly pay plus safety and performance incentives, • Home after every shift, • Slip-seat schedule so the truck keeps moving and so do you, • Medical, dental, vision, and short-term disability coverage, • Company pays for long-term disability, • 401K with company match, • PTO starts from day one and we'll honor your current PTO, • 8 paid holidays, • $25,000 company paid life insurance with options to add more, • Free hazmat renewals and DOT physicals, • CDL insurance included, • Uniforms, FR coveralls, and steel toed boots provided, • We look out for each other, • We keep the trucks in good shape so you can do your job without a breakdown circus at 2 a.m., • We keep things simple and straight, • We pay attention to safety and reward people who do things right, • At least 23 years old, • High school diploma or GED, • CDL A with tanker and hazmat endorsements, • One year of verifiable tractor trailer experience in the last four years or six months of tanker in the last two, • Clean driving record and able to pass a road test, • Able to pass drug and background checks If you want steady work, good pay, and a crew that doesn't act like robots, we're your place. So, what are you waiting for? Click here to apply and learn more details today! Apply today: Keywords: Fuel Truck, CDL, Hazardous Material, Truck, Diesel, Truck Driver, HazMat, Driver.

Job Description Deutsche Windtechnik is Germany’s largest Independent Service Provider, offering a comprehensive service package for Wind Turbine Generators (WTG) from one single source. With more than 9,000 WTGs under contract and more than 2,200 worldwide employees operating in Europe, the US and Asia, Deutsche Windtechnik sets the bar for Independent Service Provider services. Deutsche Windtechnik came to North America and started operations here in 2018. Headquartered in Houston, TX., it is our goal to set the standard for best-in-class levels of quality, safety, efficiency, and customer service in the US market. Ready to continue your career and be an important part of our wind technician team? As a Senior Technician, you work independently and essentially perform all mechanical maintenance, troubleshooting, and retrofit activities. Serve as the in-charge person or temporary team leader for their respective work team, as well as provide leadership and technical direction. Develop and maintain excellent customer relationships, advanced leadership, and management skills. Showcase your advanced skills in a particular category at a site or project leadership position. Are You Looking to: * Support with mechanical, electrical, and hydraulic systems troubleshooting and repairs to support a site? * Develop a strategy for improved maintenance diagnostics and operations to provide additional customer value and reduce the cost of service? * Generate & complete all relevant paperwork, including work order cards, checklists, AWPs etc.? * Learn how to recognize occurrences of wind turbine error codes and appropriately report the issue? * Direct the performance of wind field operations within the assigned contractual scope of responsibilities to customers? * Demonstrate responsibility for all phases of timely financial reporting, elimination of contractual liquidated damages, and availability of turbines? Are You Ready to: * Lead/Perform routine preventive & unscheduled maintenance on wind turbines bringing your skills in mechanical, electrical, and hydraulics. * Assist and help lead large corrective teams with the replacement of major turbine components, e.g., generators and gearboxes. * Recognize occurrences of wind turbine error codes and appropriately report the problem. * Maintain adherence to company policies, safety standards, and good housekeeping practices. * Work closely with internal team members to develop and implement operation-focused feedback for configuration, planned and unplanned maintenance, and financials. * Establish and maintain general safety from the system / Lock Out Tag Out (LOTO). What You’ll Need: * High School Diploma or GED. An associate degree is a bonus, but not required. * 5+ years’ experience as a Wind Turbine Technician * Valid driver’s license (NON-CDL or CDL) * Ability to read and interpret documents, and follow instructions, such as safety rules, operating and maintenance instructions, and procedures manuals. * Ability to work with minimal supervision, given proper instructions. * Ability to deal with problems involving at least one concrete variable in standardized situations. * Must be able to pass a physical exam and drug/alcohol screening. * The employee must be capable of lifting and/or moving up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus because of potential work in close confines. * Employees must be physically fit enough to freely climb 300 ft multiple times a day while wearing 25+ lbs. of climbing gear and work in extreme weather conditions. * Must be capable of rescuing team mates anywhere in tower in the event of emergency. * We care about the safety and wellbeing of every one of our employees. To help ensure their safety, any employees climbing a wind turbine must use a Personal Fall Arrest System, and may not exceed the system’s maximum weight capacity of 309 lbs. This weight must include the individual, their tooling, uniform, and personal protective equipment. Based on these safety requirements and the standard weight of equipment, employees who climb wind turbines may not exceed a maximum personal body weight of 260 lbs. What You’ll Get: * 401k with fully vested, generous company match available after 6 months. * Generous PTO, Excellent Medical/Dental/Vision Benefits. * Competitive Compensation. * Personalized and Ongoing Training. DWT CULTURE: What sets us apart is our intense focus on our customers, employees, and culture. Our Mission: To be the most trusted O&M partner to wind farm owners. Our Vision: To empower the Americas’ achievement of 100% renewable energy, one wind turbine at a time. How do we accomplish this? By building a team and a culture with the core values that are: Transparent, Innovative, Guiding (advisor and partner), Efficient, and Reliable. We call ourselves TIGERs and we hope you get an opportunity to join us someday! Equal Employment Opportunity Statement Deutsche Windtechnik is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, protected veteran or military status, and other categories protected by federal, state or local law. EEO is the Law Applicants and employees are protected under Federal law from discrimination. Powered by JazzHR F2l6JZysro

Job Description The Service Technician conducts diesel equipment repairs and preventive maintenance requirements; correcting vehicle deficiencies; making adjustments and alignments in the Service Department of a retail dealership environment. HLAs HIGH LEVERAGE ACTIVITIES (focus actions that will return the highest impact): · Determines vehicle condition by conducting inspections and diagnostic test; identifying worn and damaged parts focusing on safety, quality and customer up time. · Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units. · Embrace training opportunities maintaining certification in OEM products. KEY RESPONSIBILITIES AND PERFORMANCE MEASURES: · Provide technical service to vehicles and equipment. Including trouble shooting, electrical and diagnostic services. · Read Repair Order, observe and listen to vehicle in operation to determine malfunction and plan work procedures. · Perform general and detailed repair of all trucks, engines and components. · Overhaul gas or diesel engines. · Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs,differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts. · Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed. · Lubricate moving parts and drive repaired vehicle to verify conformance to specifications. · Advise the Service Supervisor if additional repair work is necessary · Tag all warranty parts and returns to warranty clerk. · Maintain a neat and orderly working area, and proper handling of company tools · Follow safe work practices and procedures, uses safety equipment when required, responds to suggestions for working safely and seeks assistance when necessary. · Attend training classes and keep abreast of factory technical bulletins · Other duties assigned by manager. QUALIFICATIONS AND EXPERIENCE: · High school diploma, GED, or equivalent required. · Combination of education, training, or experience that provides the required knowledge, skills, and abilities will be considered. · Related technical school training preferred. · Three to five years of commercial truck technical service experience. · Engine certifications preferred: Cummins, Detroit, International, etc. · Necessary tools to perform job responsibilities · Ability to work and learn independently. · Strong written/ verbal communication skills required. · Ability to use various windows based computer software. Experience with engine software a plus · Valid commercial drivers license preferred. PHYSICAL AND ENVIRONMENTAL CONDITIONS: Duties are performed throughout the inside and outside of the building(s). Employee is exposed to dirt, dust, heat, cold, noise and vibration, fumes and odors, wetness and humidity, and sometimes darkness. Employee is required to stand, walk, kneel, squat, crawl, bend, and twist. Employee may have to climb and/or lift up to and over 80 pounds frequently. Visual requirements are constant. Specific vision abilities required by this job include close vision and the ability to adjust focus. Due to the nature of the environment, employee is exposed to potential mechanical, chemical, electrical and fire hazards on a regular basis. NOTE: This Position Profile is not intended to be an all-inclusive. Employee may perform other related duties as required to meet the on-going needs of the company. The Position Profile is intended to describe the general nature and level of work being performed by individuals assigned to this job. It is not an exhaustive listing of all responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. Management reserves the right to revise the job or to require that other tasks be performed when circumstances change (e.g. emergencies, changes in personnel, workload, rush jobs or technological development.

Job Description If you're the type who likes working outside, solving problems with your hands, climbing to new heights (literally), and seeing the results of your work light up a skyline... we've got a hard hat with your name on it. At SkyRite, we don't just install signs. We finish what others start. Our signs are commitments, symbols of our customers' identity, and they only shine because of the skilled electricians and installers who bring them to life. That's you. This role is full-time and hourly, with steady overtime opportunities. Thanks to the Big Beautiful Bill, overtime pay is now tax-free...more of what you earn stays in your pocket. This is hands-on, physical work. You'll be outdoors on lifts, rooftops, and ladders. You'll wire up illuminated signs, troubleshoot outages, bring failing systems back to life, and make sure every project meets code. Every day is different. Every job matters. And your work literally shapes the skyline. What You'll Actually Do • Install and service illuminated and non-illuminated signs and lighting systems, • Read and interpret drawings, specs, and NEC codes to get it right the first time, • Wire, connect, and troubleshoot electrical systems safely and efficiently, • Operate sign trucks, cranes, and lifts to get the job done, • Load your truck with tools, materials, and equipment to minimize return trips, • Document your work, take photos, and complete checklists for quality control We're not looking for someone who just wants to punch a clock. We're building the next generation of leaders in the sign industry. Journeyman and Master Sign Electricians are the backbone of what we do, and we'll invest in your growth...whether that's bigger pay, more complex projects, or leadership opportunities. If you're relocating from another state and can prove at least 8,000 hours of documented sign installation or service experience, we'll help you test for your Texas license and support your move here. You'll Love This Job If You... • Take pride in work that thousands of people see every day, • Enjoy solving problems and fixing things that others can't, • Like physical work that keeps you moving and outdoors, • Want stability, steady hours, and overtime that actually pays off, • Appreciate a team that looks out for each other and gets it done, • $3,000 sign-on bonus (split depending on license/testing status), • Competitive hourly pay in the low-to-mid $20s (based on experience and license level), • Overtime pay that's now tax-free under federal law, • Medical, dental, and vision insurance with multiple plan options, • Company-paid life insurance ($25,000), • Company-paid long-term disability coverage, • Optional FSA, HSA (if eligible), short-term disability, critical care, supplemental life insurance, and even pet insurance, • Two weeks of paid time off per year (accrues and grows with tenure), • Eight paid holidays per year, • Cell phone reimbursement, • Relocation package available for the right candidate, • Active Journeyman or Master Sign Electrician license in Texas, • OR 8,000+ hours of verifiable sign installation/service work in another state (eligible to test in Texas immediately), • Reliable work ethic and safety-first mindset, • Comfortable with heights, ladders, and physical labor, • Ability to read and follow plans, specs, and codes Apply Today SkyRite is an equal opportunity employer. Keywords: Entry level, Sign Installation, Sign Technician, Journeyman, Master, Electrician, Installation, Heights, Blue Collar, Outdoor Elements, Apprentice, Commercial lighting, Pole Lights, Building Lights, Neon, Fluorescent, CDL.

TNAA TotalMed RN is seeking a travel nurse RN Med Surg for a travel nursing job in Amarillo, Texas. • Specialty: Med Surg, • Discipline: RN, • Duration: 12 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Travel We're looking for Medical Surgical RNs for an immediate travel nurse opening in Amarillo, TX. The right RN should have 1-2 years recent acute care experience. Read below for more requirements. As a MedSurg RN, you will conduct patient assessments and prioritize data collection based on patients' immediate conditions or needs. MedSurg RNs perform ongoing assessments and appropriate treatments as ordered by a physician. Documenting patient findings and providing education and support to patients' families is essential to this travel nurse position. As a Medical Surgical Travel Nurse, you should be prepared to perform the following tasks: • Provide bedside care for a variety of patients, including pre- and post-op patients., • Prepare, administer and record prescribed medication, reporting any adverse reactions to treatment., • Change dressings, insert catheters and start IVs., • Prepares equipment and aids physician during examination and treatment of patient., • Educates patients on surgical procedures., • Participates in discharge planning and initiates patient education plan as prescribed by physician. Medical Surgical Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. RNs will work in a fast-paced environment treating patients that may be confused, agitated, and/or uncooperative. Requirements*: BLS, 2 Years • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1296311. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Medical/Surgical - MedSurg RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1