Trabajos noise en Clifton, New Jersey - Page 3Crear alertas

Job Description ARCHBISHOP DAMIANO SCHOOL POSITION DESCRIPTION Position Title: Full Time Assistant Food Service Coordinator Status: Non-Exempt (35 hours per week) Reports To: Food Service Coordinator Hourly Rate: $19–$22 per hour POSITION SUMMARY: We are seeking a dedicated and experienced Assistant Food Service Coordinator to join our team at Archbishop Damiano School. In this role, you will work closely with the Food Service Coordinator to ensure the smooth operation of the school kitchen and maintain a high standard of nutrition and culinary excellence. The ideal candidate will have strong culinary skills, a passion for serving students, and a solid understanding of Department of Education nutrition guidelines. PRIMARY DUTIES AND RESPONSIBILITIES: Culinary Expertise: • Demonstrate exceptional culinary skills to prepare high-quality, nutritious meals for students with diverse dietary needs and restrictions., • Stay informed and up to date with the Department of Education's guidelines on school nutrition., • Oversee daily kitchen operations, ensuring a clean, organized, and safe work environment., • Support kitchen staff, providing guidance and support as needed., • Assist in the development of nutritious and appealing menus that meet dietary requirements., • Directly engage in food preparation, cooking, and presentation, maintaining high standards of quality and taste., • Enforce strict hygiene and safety protocols to maintain a clean and sanitary kitchen., • Monitor food storage, handling, and temperature controls to prevent contamination and ensure food safety. TRAINING & DEVELOPMENT: • Train and guide kitchen staff to ensure compliance with dietary guidelines., • Assign tasks to staff and reinforce consistent kitchen standards. KNOWLEDGE, SKILLS, AND ABILITIES: • Knowledge of ordering, inventory control, and food prep equipment., • Ability to follow written and verbal instructions., • Ability to lift and manipulate heavy objects., • Knowledge of food safety, temperature requirements, and presentation standards., • Strong cooking skills. REQUIRED QUALIFICATIONS: • Proven experience in a culinary role, with at least (3) years of experience in a similar capacity., • A culinary degree or relevant certification is preferred., • Current Food Service Sanitation Certificate., • Approved criminal history review (NJDOE)., • Experience working with special dietary needs., • Ability to lift up to 50 lbs., • Exposure to kitchen-related heat, cold, odors, and noise., • Standing, walking, bending, pushing, pulling, reaching, kneeling, and precise hand movements. ADAAA SPECIFICATIONS: Demands listed represent those required to successfully perform essential job functions. Archbishop Damiano School is an Equal Opportunity Employer.

Job Description Loan Servicing Specialist Role Responsible for maintaining documentation and performing a variety of administrative support related to documentation, processing, and closing loans. Conducts research on all loan types and makes necessary adjustments for tracking purposes. Performs all responsibilities in accordance with federal/state regulations and credit union policies/procedures. • Major Duties and Responsibilities, • Develops and maintains positive relationships with members and coworkers;, • Provides timely and accurate administrative support to branch personal including updating loan data in the system and verifying information on loans;, • Process and discharge accurate lien filings;, • Track and ensure member’s escrow is paid and the annual analysis is completed;, • Service and update insurance policies for member loans;, • Accurately perform quality control on member loans;, • Provide payoff amounts and process payoff checks appropriately;, • Submit insurance claims for members;, • Perform necessary servicing to member loans;, • Establish repayment and interest schedule based upon loan guidelines and rates;, • Provides outstanding member service, solves member issues or escalates appropriately;, • Consistently review and recommend changes to improve workflow, efficiencies, and quality;, • Provide backup support and assist in all areas of lending as necessary;, • Conducts testing on system releases and upgrades;, • Assist in reviewing and updating lending policies and procedures;, • Assist in training new employees; and Experience Preferred 2 or more years in loan servicing or processing, has knowledge of credit reporting, escrow analysis and loan insurance products. Education/Certifications/Licenses College degree or work experience equivalent required to be able to communicate orally and in writing at a level which reflects such learning. Interpersonal Skills Must be able to effectively supervise, evaluate, and train employees. Must be able to work with other departments. ADA Requirements Physical Requirements Perform primarily sedentary work with limited physical exertion and occasional lifting of up to 10 lbs. Must be capable of climbing / descending stairs in emergency situation. Must be able to operate routine office equipment including telephone, copier, facsimile, and calculator. Must be able to routinely perform work on computer for an average of 6-8 hours per day, when necessary. Must be able to work extended hours whenever required or requested by management. Must be capable of regular, reliable and timely attendance. Working Conditions Must be able to routinely perform work indoors in climate-controlled shared work area with minimal noise. Mental and/or Emotional Requirements Must be able to perform job functions independently or with limited supervision and work effectively either on own or as part of a team. Must be able to read and carry out various written instructions and follow oral instructions. Must be able to speak clearly and deliver information in a logical and understandable sequence. Must be capable of dealing calmly and professionally with numerous different personalities from diverse cultures at various levels within and outside of the organization and demonstrate highest levels of customer service and discretion when dealing with the public. Must be able to perform responsibilities with composure under the stress of deadlines / requirements for extreme accuracy and quality and/or fast pace. Must be able to effectively handle multiple, simultaneous, and changing priorities. Must be capable of exercising highest level of discretion on both internal and external confidential matters. Nothing in this position description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This job description is not a contract and should not be construed as a guarantee of employment for any specific period of time.

Job Description Job Title: Registered Dental Assistant Department: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is the fastest growing dental organization on the East Coast and Midwest. Our premier DSO is led by world class dentists who understand what highly skilled dentists and dental professionals need to grow a practice while focusing on delivering the best-in-class clinical care to their patients. We offer up-to-date equipment and technology, experienced and friendly staff, and dentists who truly care about their patients, as well as competitive pay and, where applicable, a benefits package that includes medical, dental, vision, 401(k), training, and career growth opportunities. Position Summary As a Registered Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a Dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Registered Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintaining inventory control in the operatories where treatment is rendered by the Provider, • Adhering to OSHA, HIPAA, and CDC guidelines, • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping, • Be able to perform basic lab procedures such as taking impressions, pour models, and preparing cases for external labs., • Remove excess cement from crowns or other restorations and orthodontic appliances;, • Fabricate and cement temporary crowns and bridges after preparation of tooth (teeth) by a dentist., • Placing and removing rubber dam and clamp., • This does not include intra-oral occlusal adjustment;, • Trial size (pre-select) orthodontic bands, wires, stainless steel crowns and temporary crowns intra-orally or on diagnostic models;, • Place and remove arch wires and ligature wires, • Remaining items that are within the scope of Registered Dental assistant., • Maintaining public area appearance, • Performs miscellaneous job-related duties as assignedQualifications, • High School diploma or GED required, • Easily able to learn new technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ - Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • Certified Dental Assistant certificate preferred, • Registered Dental Assistant License preferred, • 1+ years work experience as a Dental Assistant preferred, • Ability to work in a fast-paced environment, • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed, • X-ray License required, • Current NJ Registered Dental Assistant license, • Active CPR Certification is required.Knowledge and Skills/Expected Competencies, • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR 2F2rtkqGr4

Job DescriptionSalary: $165,000-$185,000 Mamas Creations, Inc. (NASDAQ: MAMA) is a leading marketer and manufacturer of fresh deli prepared foods, found in over 8,500 grocery, mass, club and convenience stores nationally. The Companys broad product portfolio, born as MamaMancinis, from a rich history in Italian foods, now consists of a variety of high quality, fresh, clean and easy to prepare foods to address the needs of both our consumers and retailers. Our vision is to become a one-stop-shop deli solutions platform, leveraging vertical integration and a diverse family of brands to offer a wide array of prepared foods to meet the changing demands of the modern consumer. For more information, please visit . We have an excellent opportunity for a highly skilled and experienced leader to serve as the Senior Director, Plant Operations of our East Rutherford facility. You will be the senior site leader responsible for the overall performance, safety, Grandma Quality, controls, culture, and financial results of the manufacturing facility. This role serves as the plants general manager, accountable for translating enterprise strategy into consistent, disciplined execution with excellence at the site level. The Senior Director leads through people, systems, and standards, ensuring production, FSQA, maintenance, warehousing, and workforce leadership operate in alignment with Grandma Quality. This role balances results with responsibility, honoring Mamas heritage while building scalable, sustainable operations. Key Responsibilities • Own end-to-end plant performance, including safety, food safety, quality, service, cost, labor efficiency, and employee engagement., • Own overall plant efficiency and throughput performance, ensuring production capacity, labor models, and operating practices support enterprise targets., • Drive improvement in throughput, yield, and line performance by setting expectations, removing barriers, and holding leaders accountable for results., • Serve as the strategic leader for the site, translating enterprise priorities into clear site-level strategies, initiatives, and execution plans., • Partner with the Senior Manager, Production Operations to ensure production schedules and execution plans support optimal efficiency and service outcomes., • Own the plant operating budget, including labor, overtime, supplies, and controllable costs; ensure performance aligns with financial targets., • Balance cost discipline with Mamas commitment to Grandma Quality, safety, and employee well-being., • Use KPIs and financial data to evaluate performance, prioritize investments, and guide decision-making., • Partner with OpEx/CI to identify and sponsor continuous improvement initiatives that deliver measurable, sustainable gains in efficiency, throughput, and cost performance., • Ensure efficiency gains and cost improvements are sustainable and embedded into standard work and leadership routines., • Lead, coach, and hold accountable all direct reports, site functional leaders, and the downline., • Serve as the primary owner of plant culture, reinforcing values-based leadership, respectful supervision, and consistent accountability., • Ensure site execution aligns with enterprise standards of excellence and Grandma Quality while addressing location-specific risks and opportunities., • Partner with FSQA leadership to maintain strong food safety culture, regulatory compliance, and audit readiness., • Own site-level labor strategy, workforce planning, and performance management in partnership with People Operations., • Drive operational discipline through KPIs, operating practices, and structured problem-solving., • Partner with Reliability & Asset Management to support uptime, preventive maintenance execution, and capital improvements., • Support capital projects, expansions, and equipment installations at the site level., • Participate in operational diligence and integration activities related to acquisitions or expansions impacting the facility., • Serve as the primary escalation point for site risks, performance gaps, and employee relations matters., • Build strong cross-functional relationships that nurture trust, accountability, and pride in workmanship., • Collaborate closely with Senior Directors and plant leaders at other facilities to share best practices, standardize where appropriate, and drive enterprise-wide operational improvement., • Participate in cross-facility working groups, initiatives, and problem-solving efforts to strengthen consistency, performance, and scalability across the enterprise., • Champion collaboration between facilities while respecting site-specific strengths, constraints, and heritage., • Other related tasks, as necessary to drive results and support the business. Qualifications • Bachelors degree in Operations Management, Engineering, Business, or related field; or equivalent experience., • 15+ years of progressive leadership experience in manufacturing operations, preferably in food manufacturing or regulated environments., • 10+ years of experience leading multi-shift operations and managing leaders (managers/supervisors)., • Demonstrated experience owning site KPIs, budgets, labor planning, and operational performance improvement., • Expert usage of ERP systems. NetSuite preferred., • Strong working knowledge of food safety/regulatory environments (USDA/FDA), HACCP, GMPs, and audit readiness expectations., • Proven ability to lead through change while maintaining operational stability and culture., • Strong communication, planning, and cross-functional leadership skills., • Lean/Six Sigma knowledge/certification, preferred., • Bilingual (English/Spanish) highly preferred. Essential Physical Requirements • Ability to regularly walk, stand, and move throughout the manufacturing facility., • Ability to navigate stairs, catwalks, and uneven surfaces safely., • Ability to visually and audibly observe operations and employee practices., • Ability to wear required PPE (hair/beard nets, safety shoes, gloves, safety glasses, hearing protection)., • Ability to work in varying environmental conditions (heat, cold, noise, humidity)., • Ability to sit for extended periods while performing administrative work., • Ability to travel locally as required., • Ability to communicate clearly and effectively. We offer a comprehensive compensation package that includes a base salary (to $185k,) plus bonus eligibility, paid time off, holiday pay, medical, dental, vision, and life insurances, FSA, EAP, and 401(k.)

Job DescriptionSalary: Role and Core Responsibilities 1. Market & Consumer Insight • Conduct indepth market research, studying customer needs, pain points, usage behavior, and buying trends., • Analyze competitors (features, pricing, performance, innovation cycles) to identify gaps and opportunities. 2. Product Strategy & Roadmap • Define a clear product vision, positioning, and longterm strategy for the washing machine lineup., • Build and update the product roadmap based on market trends, sales input, and competitive evolution. 3. Product Definition & Requirements • Translate market insights into Product Requirement Documents (PRDs) with detailed feature definitions, performance expectations, and user experience targets., • Determine product specifications such as capacity, efficiency class, motor type, wash programs, connected features, energy requirements, and regulatory compliance. 4. CrossFunctional Leadership • Work closely with R&D to guide product development from concept, prototype testing, and validation to certification., • Collaborate with manufacturing, supply chain, and quality teams to ensure cost optimization, stable production, and product reliability., • Partner with marketing and sales for gotomarket planning, messaging, and launch readiness. 5. Product Development & Innovation • Lead the end-to-end development process, ensuring timely delivery, cost targets, and product performance KPIs., • Promote innovation in functional areas such as washing performance, smart connectivity, energy efficiency, water usage, noise reduction, and user interface design., • Evaluate new technologies (motors, materials, sensors, algorithms, AIdriven cycles). 6. Launch Management • Develop and execute product launch plans, coordinating marketing assets, training materials, retail strategies, and pricing., • Align with channel partners and sales teams for launch volume, forecasts, and promotional activities. 7. Product Lifecycle Management (PLM) • Monitor the performance of each model: sellout, margin, consumer reviews, failure rates, and return reasons., • Adjust strategy based on performance (phasein/phaseout, midcycle feature upgrades, cost engineering). 8. AfterSales Feedback Loop • Collaborate with aftersales and service teams to understand top failure modes, spare parts issues, and user complaints., • Use data to drive product improvements and reduce warranty cost. 9. Pricing & Business Management • Own the products financial performance: cost targets, margin analysis, pricing strategy, and profitability optimization., • Conduct feasibility studies and manage business cases for new models. 10. Stakeholder Communication • Regularly update management and crossfunctional teams with reports, analysis, dashboards, and risk assessments., • Ensure alignment on strategies, timelines, and decisions. Technical and Functional Skills • Strong understanding of washing machine technologies (motors, detergent systems, wash algorithms, safety, regulations)., • Experience in R&D coordination, testing, and quality validation., • Knowledge of energy efficiency standards and compliance requirements., • Business & Analytical Skills: Market research and competitive analysis, financial modeling and pricing, Road mapping & strategic planning., • Soft Skills: Leadership and crossfunctional influence, clear communication and technical storytelling, problemsolving, negotiation, and prioritization. Preferred Skills • MS Office Suite experience a plus, • Power BI, • Supply Chain Management, • International Business Additional Notes • Work shift Monday to Friday Business hours, • Location Costa del Este, Panam, • Available for traveling across the region

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking an experienced, highly motivated Control Systems Engineer — LabView Developer to join its rapidly growing team. The Control Systems Engineer will have ownership of the design, development, and commissioning of the control system for complex equipment within Thea Energy’s stellarator fusion demonstration plant. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Work with a team of experts in developing controls for Thea Energy’s systems., • Architect, program, and document cutting-edge distributed Data Acquisition and Control (DAC) projects utilizing National Instruments hardware and software, such as LabVIEW, VeriStand, TestStand, SystemLink incorporating DAQ, PXI, cRIO, and RIO (FPGA) architectures., • Develop modular, readable, and reusable LabVIEW code, emphasizing reliability and continual improvement., • Create engineering tools, including both desktop and web-based testing applications., • Integrate VHDL and C codes into hardware-in-the-loop (HIL) systems, utilizing both NI and open-source hardware and software platforms., • Collaborate with hardware and systems engineers to define interfaces and requirements and ensure seamless integration of DAC/HIL solutions., • Troubleshoot and swiftly resolve issues in LabVIEW-based DAC/HIL systems., • Develop and execute comprehensive test plans., • Document design specifications, test procedures, and user manuals for automation and acquisition systems.Ideal Experience & Skillsets:, • Extensive experience as a control engineer on complex, large-scale systems., • Experience with magnetic confinement fusion, aerospace, or other highly technical industries., • B.S. or M.S. in Computer Science, Electrical Engineering, or a related physics or engineering discipline., • 5+ years of hands-on LabVIEW development experience; experience with VeriStand, TestStand and SystemLink., • Proven success in advanced LabVIEW programming, focusing on Data Acquisition and Control or HIL systems, within scientific, industrial, or research environments., • Proficiency with National Instruments hardware, including cRIO, PXIe, and expertise in both Windows and RT Linux environments., • Competency in HIL/SIL software architecture., • Proficient in the development and optimization of LabVIEW applications and LabVIEW Certification (Certified LabVIEW Developer and/or Architect) is advantageous., • Exceptional work ethic and communication skills.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Passaic County Community College is seeking a part-time Admissions & Financial Aid Administrator for the Office of Admissions main Paterson campus location. This position will be responsible for the enrollment activities of prospective and new students as assigned by the Director of Admissions. The is a part-time, administrative position. Examples of Duties • Initiate, organize and participate in recruitment activities throughout Passaic County and the North Jersey Region, • Manage a recruitment territory including schools, community agencies and special populations., • Counsel prospective and new students on all aspects of the enrollment process including general financial aid inquiries, presentations, workshops, etc., • Represent the College at various admissions functions as assigned., • Have familiarity with college academic programs, policies and procedures including reviewing eligibility for and entering placements., • Liaise with internal and external stakeholders., • Collaborate with internal and external stakeholders to drive the development and maintenance of relationships which drive enrollment and recruitment., • Lead, organize and support enrollment and recruitment related activities at all Passaic County Community College campus locations., • Bachelor's degree required, Master’s degree preferred., • Higher education experience preferred., • Excellent: oral/written/problem solving, communication, organizational, time-management and analytical skills, • Ability to work both independently and as part of a team, • Ability to collaborate effectively with other members of the college community, • Ability to understand and apply college policies, • Maintain essential and confidential records, • Excellent interpersonal skills and the ability to work with individuals from diverse backgrounds, • A valid driver's license, • Flexibility to work evenings and weekends, • Ability to work in a fast-paced environment, which may include; above average levels of noise, long periods of standing, carrying recruitment materials, driving at night and in varying weather conditions, • Computer literacy with Microsoft Office required, knowledge of new media including social networking and web-based communication preferred Compensation: Compensation is determined by a variety of criteria, including but not limited to, previous relevant experience, education level, and certifications. The hourly pay range for this position is $22-$27. Benefits: • New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.), • Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance., • Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses., • NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Job Description Job Title: Student Maintenance Assistant Reports To: Director of Operations and Administration Location: The Heights at Montclair State University Compensation: $18.00 per hour and work up to up to 29 hours per week. FLSA Status: Student Non-Exempt Part-Time Position Positions: 4 Company Information: Capstone On-Campus Management (COCM), with headquarters in Birmingham, Alabama, is a group of student housing professionals focused exclusively on the management of housing communities owned by non-profits and/or highly affiliated with a university. Summary: The Student Maintenance Assistant is responsible for assisting with the preventative maintenance tasks and summer projects in the community and daily office tasks in the Capstone Office. The Student Maintenance Assistant ensures the office operates smoothly by managing varied responsibilities that keep the office running. Essential Duties and Responsibilities Include: • Follow office workflow procedures to ensure maximum efficiency., • Maintain files and records with effective filing systems., • Support the team with various administrative tasks (redirecting calls, disseminating correspondence, scheduling meetings etc.), • Greet and assist visitors when they arrive at the office., • General cleaning of the grounds., • Replacing air filters., • Replacing light bulbs., • Distributing items to apartments., • Painting, spackling, and custodial work. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • High school diploma., • Current student attending a college or university in the Montclair, NJ area., • Working knowledge of office equipment (e.g. optical scanner)., • Ability to lift up to 35lbs and navigate up and down stairs., • Demonstrate proficiency in verbal communication., • Possess strong customer service skills. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must occasionally lit and/or move up to 35 pounds. Specific vision abilities required by this job include close vision and distance vision. Position is not eligible for benefits. This position works up to 29 hours per week. If you are unable to apply because of incompatible assistive technology or a disability, please contact COCM Recruitment from our website. We will make every effort to respond to your request for assistance as soon as possible. To provide equal employment opportunities to all individuals, employment decisions at Capstone On-Campus Management (COCM) will be based on qualifications, and abilities. COCM does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, marital status, veteran status or any other characteristic protected by law.

Job DescriptionQuality Control Microbiology Analyst II, III QC Microbiology Analyst II The Quality Control Microbiology Analyst II serves as a support role to clinical and commercial production. Microbiology Analyst II will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. This position will report into the Manager of QC Microbiology. • Environmental monitoring in controlled environments; Non-viable particulate monitoring, Active viable air monitoring Personnel monitoring, Surface sampling, Passive air monitoring, • Equipment monitoring; Ensure equipment is in proper working conditions, Ensure all equipment is properly maintained/calibrated, Program equipment with proper workflows, Assist with routine laboratory testing, Plate reads and incubations, • Shipping of test samples and equipment to contract laboratories for testing, • Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP), • Writing/conducting investigations pertaining to environmental monitoring and testing, • Develop and train QC Microbiology Analyst I personnel on relevant business processes.REQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience; Minimum 2-4 years of experience with environmental monitoring or within the biopharmaceutical industry., • GxP/GDP, Safety Trained, • Proficient with computer software such as; Microsoft Office, MODA/LIMS, • Familiarity with ISO and EU standards, • Strong written and oral communication skills, • Technical training ability, • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facility, • The QC Microbiology Analyst II must be able to maintain aseptic behavior within a cleanroom environment for an extended period., • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilitiesWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. QC Microbiology Analyst III The Quality Control Microbiology Analyst III serves as a support role to clinical and/or commercial production. The QC Microbiology Analyst III will coordinate data for batch release, participate in project/client meetings, and author/revise environmental monitoring procedures. Additionally, the QC Microbiology Analyst will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring., • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Analyst II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work ordersREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience; Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • GxP/GDP Trained, • Proficient with computer software such as; Microsoft Office, MODA/LIMS, Microsoft Visio (preferred), Netsuite (preferred), Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experience, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facilityWorking Environment, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen., • Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facilityPhysical Requirements, • The QC Microbiology Analyst II must be able to maintain aseptic behavior within a cleanroom environment for an extended period., • Must be physically capable to stand; walk; site; bend; stretch; use hands to finger, handle or feel; reach with hands and arms; and talk or hear., • Occasionally personal protective equipment may be required including lab coat, latex gloves, safety glasses and/or respirator.Please note these job descriptions are not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionQuality Control Microbiology Analytics I, II, III QC Microbiology Analyst I The Quality Control Microbiology Analyst I serves as a support role to clinical and/or commercial production. The QC Microbiology Analyst I will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. This position will report into the Manager of QC Microbiology. • Environmental monitoring in controlled environments: Non-viable particulate monitoring; Active viable air monitoring, Personnel monitoring, Surface sampling, Passive air monitoring, • Equipment monitoring: Ensure equipment is in proper working conditions; Ensure all equipment is properly; maintained/calibrated; Assist with routine laboratory testing; Plate reads and incubations, • Shipping of test samples and equipment to contract laboratories for testing, • Complete all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP).REQUIREMENTS, • Associates degree in a science or relevant field required; Minimum 0-2 years of experience or equivalent experience. Environmental monitoring or within the biopharmaceutical industry experience preferred., • Proficient with computer software such as; Microsoft Office, • Strong written and oral communication skills, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Trained in GxP/GDP, Safety, • The QC Microbiology Analyst I must be able to maintain aseptic behavior within a cleanroom environment for an extended period., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facility, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. QC Microbiology Analyst II The Quality Control Microbiology Analyst II serves as a support role to clinical and commercial production. Microbiology Analyst II will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. This position will report into the Manager of QC Microbiology., • Environmental monitoring in controlled environments; Non-viable particulate monitoring, Active viable air monitoring Personnel monitoring, Surface sampling, Passive air monitoring, • Equipment monitoring; Ensure equipment is in proper working conditions, Ensure all equipment is properly maintained/calibrated, Program equipment with proper workflows, Assist with routine laboratory testing, Plate reads and incubations, • Shipping of test samples and equipment to contract laboratories for testing, • Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP), • Writing/conducting investigations pertaining to environmental monitoring and testing, • Develop and train QC Microbiology Analyst I personnel on relevant business processes.REQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience; Minimum 2-4 years of experience with environmental monitoring or within the biopharmaceutical industry., • GxP/GDP, Safety Trained, • Proficient with computer software such as; Microsoft Office, MODA/LIMS, • Familiarity with ISO and EU standards, • Strong written and oral communication skills, • Technical training ability, • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facility, • The QC Microbiology Analyst II must be able to maintain aseptic behavior within a cleanroom environment for an extended period., • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilitiesWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. QC Microbiology Analyst III The Quality Control Microbiology Analyst III serves as a support role to clinical and/or commercial production. The QC Microbiology Analyst III will coordinate data for batch release, participate in project/client meetings, and author/revise environmental monitoring procedures. Additionally, the QC Microbiology Analyst will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring., • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Analyst II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work ordersREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience; Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • GxP/GDP Trained, • Proficient with computer software such as; Microsoft Office, MODA/LIMS, Microsoft Visio (preferred), Netsuite (preferred), Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experience, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facilityWorking Environment, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen., • Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facilityPhysical Requirements, • The QC Microbiology Analyst II must be able to maintain aseptic behavior within a cleanroom environment for an extended period., • Must be physically capable to stand; walk; site; bend; stretch; use hands to finger, handle or feel; reach with hands and arms; and talk or hear., • Occasionally personal protective equipment may be required including lab coat, latex gloves, safety glasses and/or respirator.Please note these job descriptions are not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionBenefits: • Referral program, • 401(k), • Bonus based on performance, • Company parties, • Employee discounts, • Flexible schedule, • Free food & snacks, • Free uniforms, • Health insurance, • Paid time off, • Competitive massage rate when booked, • Gratuity, commission and potential bonus, • Steady clientele, • Healthcare benefits for full-time employees, • Paid continuing education credits for full-time employees, • $100 Annual Self Care reimbursement, • Earned PTO, • Product discounts, • Flexible scheduling, • No mandatory sales goals or scripts; focus on your craft and guest's needs, • All service supplies and wardrobe requirements are provided, • Top-of-the-line hydraulic massage tables and all new equipment, • Inspiring, calming work environment for both clients and therapists, • Strong teamwork ethic with an emphasis on massage therapist support, • A positive and supportive team with a present general manager and engaged owners, • Off-site events and team building opportunities, • Celebratory lunchesSchedule / Expected Work Hours:, • Ability to work flexible hours, including evenings, weekends and holidays, • Availability for at least one PM and one-weekend shiftResponsibilities:, • Share the healing power of touch to inspire and transform through the benefits of massage therapy., • Provide therapeutic massage through a variety of modalities (Prenatal, Sports, Stretching Techniques, etc.), • Ensure the service room, equipment, and tools are kept clean and in compliance with established licensure standards. All required supplies are provided., • Full and Part-Time positions available., • Weekend availability is requiredteam members must be available to work either Saturday or Sunday, including both day and evening shifts., • Weekend, Holidays, Day shift, Night shift, • Will consider qualified candidates beginning their careers in massage therapy who possess the right qualities and demonstrate an innate talent for and understanding of therapeutic massage.Qualifications:, • Desire to be part of a team that has an infectious passion for health and wellness., • License/certification required in state of practice. Must present New Jersey license during the interview process and maintain original or duplicant license throughout employment if hired., • Knowledge of Swedish and Deep Tissue Massage and other modalities., • Requires the ability to perform deep tissue., • Availability during prime earning potential periods including nights, weekends, and holidays., • Must be able to stand and exert well-paced mobility for up to 6 hours in length. Length of time of these tasks may vary from day to day and task to task., • Should be able to bend, stoop, squat, and stretch to fulfill room resetting tasks and all massage service protocols. Requires grasping, standing, sitting, walking, repetitive motions, bending, climbing, listening, and hearing ability and visual acuity. Company Purpose/Mission: Self-Care is Essential The NOW is designed as a refuge to help you disconnect from the outside world and reconnect within. We are where you go to turn down the noise so you can listen to what your body needs. We say show up for yourself so you can better support others. Relax your body. Reset your soul. Start NOW. We design our services to be convenient, affordable, and high-quality always. The menu of customizable enhancements makes personalizing your service simple. Our interiors are recognized for their elevated aesthetic, inspired by exotic destinations from around the world. Company Values: Brand Truths LIVE IN THE NOW Be Present. Take time to recharge and reconnect within. KINDNESS IS MAGIC Positive energy always. Create a circle of warmth and compassion from welcoming guests to giving back to your community. CARE FOR THOSE WHO CARE FOR OTHERS Foster an environment where team members feel valued, recognized, and rewarded. AUTHENTICITY ALWAYS Open and transparent communication with our inner circle and guests.

Job Description Instrumentation Controls Technician Location: Lyndhurst, NJ Schedule: Monday – Friday | 2:00 PM – 10:30 PM (2nd Shift) Pay: $35 – $40 per hour Type: Contract-to-Hire Are you the kind of person who can look at a control panel, hear a weird machine noise, and immediately start diagnosing the problem in your head? If PLCs, instrumentation, and troubleshooting industrial equipment are your thing, this could be a great fit. We are seeking an Instrumentation Controls Technician to support a busy manufacturing facility in Lyndhurst, NJ. In this role, you will work with plant systems, instrumentation, and control equipment to ensure operations run safely and efficiently. You will also help maintain calibration programs, troubleshoot automation issues, and support plant operations when technical challenges arise. If you enjoy solving technical problems and working hands-on with equipment and control systems, this is a strong opportunity with a company that values technical expertise. What You'll Do * Troubleshoot and maintain PLC and control systems supporting plant equipment * Maintain and repair instrumentation, sensors, and electrical systems * Analyze and test computer control systems based on system design specifications * Support machine operating systems and control programs * Perform instrument calibration and calibration documentation * Manage calibration schedules and maintain compliance with ISO 9000 requirements * Diagnose issues with labeling equipment and automated systems * Perform scheduled maintenance on electrical and electronic devices * Provide rotational weekend on-call support for plant operations when required What We're Looking For * Strong troubleshooting and analytical skills * Solid electrical and controls background * Experience with PLCs (Allen-Bradley preferred) * Experience with pneumatic and hydraulic systems * Ability to read technical drawings, P&IDs, and ladder logic diagrams * Experience performing instrument calibration * Strong communication skills and ability to work independently or on a team * Experience in industrial manufacturing environments such as chemical, pharmaceutical, or food processing is preferred * Technical school training or related degree preferred * Experience with CMMS systems and smart instruments is a plus Additional Details * Schedule: Monday–Friday, 2:00 PM – 10:30 PM * Pay: $35–$40/hour * On-Call: Weekend rotation for plant support * Position Type: Contract-to-Hire * Location: Lyndhurst, NJ About Zing Recruiting Zing Recruiting is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, genetic information, or any other protected status under federal, state, or local law. We are committed to fostering a diverse and inclusive workplace. #ZINGZIP #ZINGNJ Company DescriptionZing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.Zing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.

Job Description Soar With Us! Dassault Falcon Jet proudly provides competitive pay, quality benefits, and programs that support your career advancement and personal development. Our benefits are designed to support you and your family’s health and wellbeing, help you secure a strong financial future, and empower you to be successful in all aspects of your work and life. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us! Why Join Us? Impactful Work: Your expertise will directly contribute to the safety and efficiency of our operations. Growth Opportunities: We support your professional development and offer opportunities for advancement. Collaborative Environment: Work with a team of dedicated professionals who are passionate about aviation. Ready to soar with us? Apply now and be a part of our mission to support the world's greatest business jets! PRINCIPAL DUTIES/RESPONSIBILITIES (ESSENTIAL FUNCTIONS): • Perform maintenance and inspection of aircraft in accordance with manufacturers' data, Federal Aviation Regulations and repair station inspection and procedures manual., • Inspect the maintenance performed by others in accordance with the repair station inspection and procedures manual to ensure correct performance of such maintenance when designated to perform the quality control function., • Assists other Aircraft Maintenance Technicians with complex tasks requiring advanced knowledge and skills in maintenance and repair of powerplant systems., • Conduct Conformity Inspections of aircraft and aircraft records to evaluate current airworthiness., • Maintain aircraft/engine and APU records, log entries, CAMP updating and other documentation per FAR’s and CRS Manual., • Evaluate discrepancy reports issued against aircraft to determine if such discrepancy reports affect the aircraft's airworthiness., • Act as liaison among flight operations, Pre-owned Aircraft Sales, service centers and buyers to determine appropriate corrective action and cost to repair buyer generated discrepancies., • Act as liaison among flight operations, Pre-owned Aircraft Sales, service centers and sellers to identify discrepancies and ensure that the company's financial interest in the subject aircraft is understood after completion of the sale. Recommend appropriate corrective action and cost to repair such discrepancies. Document all maintenance performed in accordance with current Federal Aviation Regulations, the DFJ Flight Operations Manual and the Certified Repair Station Manual., • Prepare CAMP work orders for requesting Service Center proposals for scheduled inspections and maintenance to include aircraft refurbishment/upgrades, Service Bulletins, Airworthiness Directives, etc., • Prepare aircraft for static demonstration to support sales and marketing, • Maintain technical publications related to aircraft maintenance current, • Clean exterior and interior of aircraft as required., • Perform maintenance and repair of facilities where appropriate, • Perform maintenance and repair of ground support equipment as needed, • Perform projects and tasks at the direction of COM or Director, • Attend Industry and Peer Group functions, • High School Graduate, • Associate Degree in Aircraft Maintenance Technology or graduate of a Certified Maintenance Technical School, • FAA maintenance Certificate with Airframe and Powerplant Ratings, • Microsoft Office Skills, • FAA Certified Repair Station Operations., • Requires working with critical and changing deadlines, • Travel required including some international, • Flexible days off and working hours as required supporting the irregular flight schedule of DFJ's Flight Department, • Requires working indoors and outdoors sometimes under extreme environmental conditions including but not limited to noise, cold, heat and high humidity, • Requires manual dexterity to safely perform tasks in cramped locations and high elevations The compensation for this position typically falls between $62.00 and $72.00 per hour. This position is eligible for overtime. This position may be eligible for a sign on bonus or shift differential. Note: the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Job Title: Dental Assistant w/ X-ray Department/Location: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary As a Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • High School diploma or GED required., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required., • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public. At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR xA4PDbrQ6E

Job Description Job Title: Registered Dental Hygienist - $10,000 Sign-On Bonus Department: Clinical Reports to: Chief Dental Officer FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary ProSmile is looking to hire an enthusiastic dental hygienist to join our dedicated dental team. Thanks to a steady demand for our services and a loyal and strong patient base, we are expanding our horizon even further. As a result, we are looking for excellent talent to grow with us. Our Registered Dental Hygienist role is for any qualified individual, including recent Hygiene school graduates! We offer a competitive salary, with an option to join an amazing team. Duties and Responsibilities The duties include, but are not limited to: • Provide excellent patient care, • Take and develop dental x rays, • Assess patients’ oral health and report findings to dentists, • Document patient care and treatment plans, • Educate patients about oral hygiene techniques, such as how to brush and floss correctly, • Performs miscellaneous job-related duties as assignedQualifications, • Dental Hygiene license required, • Active CPR Certification is required., • High school diploma or GED requiredKnowledge and Skills/Expected Competencies, • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Ability to perform the duties and tasks of a Registered Dental Hygienist Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR vCM5ILt7LC

Job Description Job Title: Dental Assistant w/ X-ray Department/Location: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Sign-on Bonus: $1,000 Company Overview ProSmile is the fastest growing dental organization on the East Coast and Midwest. Our premier DSO is led by world class dentists who understand what highly skilled dentists and dental professionals need to grow a practice while focusing on delivering the best-in-class clinical care to their patients. We offer up-to-date equipment and technology, experienced and friendly staff, and dentists who truly care about their patients, as well as competitive pay and, where applicable, a benefits package that includes medical, dental, vision, 401(k), training, and career growth opportunities. Position Summary As a Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • High School diploma or GED required., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required., • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR s8XCM7OvuI

Job Description Job Title: Class B Mechanic Job Type: Full-Time Location: Secaucus, NJ Reports To: Fleet Manager Position Summary The Class B Mechanic is responsible for performing routine maintenance, repairs, and basic diagnostics on a fleet of waste collection vehicles and related equipment, including front loaders, rear loaders, roll-offs, and support equipment. This role supports overall fleet operations by ensuring equipment is safe, reliable, and compliant with DOT and environmental regulations. The ideal candidate is a dependable technician with solid mechanical skills, a willingness to learn, and the ability to work both independently and alongside senior mechanics. Schedule & Compensation • Schedule: Day Shift – 5:30 AM to 3:30/4:00 PM, • Position Type: Union position (subject to current and upcoming union agreement) Key Responsibilities • Perform preventative maintenance and routine servicing on diesel trucks and fleet equipment, • Assist with diagnostics and repairs on hydraulic, air brake, electrical, and mechanical systems, • Complete oil changes, brake work, filter replacements, and general repairs, • Support Class A mechanics with more complex troubleshooting and repairs, • Conduct DOT inspections and ensure vehicles meet safety standards, • Maintain clean and accurate service records and work orders, • Assist with minor road calls or field service as needed, • Follow all safety procedures and environmental regulations, including proper handling of materials, • Maintain a clean and organized work area Equipment & Fleet • Refuse trucks (front loaders, rear loaders, roll-offs), • Diesel trucks and fleet vehicles, • Forklifts and light-to-moderate heavy equipment Qualifications • High school diploma or GED required; technical training is an asset, • 2–5 years of experience as a diesel or heavy equipment mechanic, • Valid driver’s license required; CDL (Class A or B with air brake endorsement) is an asset or willingness to obtain, • Basic to intermediate knowledge of diesel engines, hydraulics, and electrical systems, • Ability to follow diagnostics and repair procedures under guidance, • Comfortable working in a fast-paced shop environment, • Physically capable of lifting up to 50 lbs Preferred Skills & Certifications • Experience working on refuse trucks or similar heavy equipment, • Familiarity with diagnostic tools (JPRO, Cummins INSITE, or similar), • Welding or fabrication experience is an asset, • Understanding of DOT safety inspections Training & Support • On-the-job training provided, • Opportunity to learn from senior (Class A) mechanics, • Growth path into a Class A / senior mechanic role Work Environment • Primarily shop-based with occasional field work, • Exposure to noise, grease, odors, and outdoor conditions, • Work performed in shop, transfer stations, and landfill environments, • PPE required at all times Benefits • Union benefits package (health, pension, etc.), • Paid vacation and sick time, • Stable, long-term employment opportunityCompany DescriptionWe work with you to ensure the job fits what you are looking for. We will also help you build an awesome resume.We work with you to ensure the job fits what you are looking for. We will also help you build an awesome resume.

Job DescriptionJoin the nation’s leading manufacturer of educational and commercial furniture. Virco is an Equal Opportunity/Affirmative Action employer. We are currently seeking an enthusiastic Territory Sales Manager with experience to join the team. At Virco our values are Voice, Dignity, Fairness, Leadership, and Merit. We give every employee a voice and treat them with dignity and fairness. In return, we expect them to be a leader and then reward them on merit. Lots of companies talk about taking their values to heart. At Virco, our values are our heart. It is preferred that the candidate live in the surrounding areas of Jersey City, Paramus and Princeton, New Jersey. Safety Statement: This is a safety sensitive position. Job Purpose: To attain and exceed annual sales goals as established by the company for the assigned territory to all markets served by the National Sales group. Essential Functions: • Develop and implement strategies to increase revenue and sales within an assigned geographic territory. Includes but is not limited to development of all Virco targeted markets., • Plan and implement diversified sales action plan., • Manage all company provided new and existing construction leads in CRM., • Develop expert knowledge of all Virco products. This includes learning through seminars, training sessions and self-taught applications., • Build and maintain strong relationships with customers, understand their preferences and conduct market research to stay informed about competition., • Using the company’s sales activity planner, submit and update daily and weekly sales plans and activities as well as create itineraries for the following work week., • As directed by the Regional Sales Manager, attend conventions and conferences where the Company’s products are displayed., • Provide timely and accurate reports on sales activities and territory performance to management., • Perform other duties as assigned. QUALIFICATION GUIDELINES Required Qualifications: • Must have a minimum of a High School diploma or equivalent., • Must have at least 2 years of previous sales experience, with a focus on managing a territory., • Must be proficient with Microsoft Office programs., • Must have proficiency in the following job-critical skills: communication, judgment/decision making, safety, quality of work, initiative, teamwork, flexibility, leadership, service, motivation, planning/organizing, and job knowledge/skills development., • Must have the ability to drive vehicles and have a valid driver's license., • Must be able to travel overnight one to two nights a week on average, with occasional stays three to four nights as required, including weekends., • Must be able to speak English. Preferred Qualifications: • A 4-year college degree, • Experience in K-12 educational furniture sales. Physical Requirements: Able to travel frequently for business, which includes significant driving to customer locations. Able to lift, push, or pull up to 35 pounds of merchandise or samples occasionally. Able to sit at a desk, as needed, up to 25% of the work week. Must be able to adjust to applicable environmental conditions during travel, to include changes in temperature. Must wear applicable hearing and/or eye protection while in the production/distribution floor environment. This job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Activity Hours per day Never 0 hours Occasionally up to 3 hours Frequently 3-6 hours Constantly 6-8+ hours Sitting X Walking X Standing X Bending (neck) X Bending (waist) X Squatting X Climbing X Kneeling X Crawling X Twisting (neck) X Twisting (waist) X Hand Use: Dominant hand Right Left X Is repetitive use of hand required? X Simple Grasping (right hand) X Simple Grasping (left hand) X Power Grasping (right hand) X Power Grasping (left hand) X Fine Manipulation (right hand) X Fine Manipulation (left hand) X Pushing & Pulling (right hand) X Pushing & Pulling (left hand) X Reaching (above shoulder level) X Reaching (below shoulder level) X LIFTINGCARRYING Never 0 hrs. Occasionally up to 3 hrs. Frequently 3-6 hrs. Consistently 6-8+ hrs. Height Never 0 hrs. Occasionally up to 3 hrs. Frequently 3-6 hrs. Consistency 6-8+ hrs. Distance 0-10 LBS. X X 11-25 LBS. X X 26-50 lbs. X X 51-75 lbs. X X 776-100 LBS. X X 100+ LBS. X X Please indicate if your job requires: YES NO (IF YES, PLEASE BRIEFLY DESCRIBE) • Working with biohazards such as: blood borne pathogens, sewage, hospital waste, etc. No______________ (Management reserves the right to change, rescind, add, or delete the duties and responsibilities of positions within the job description at any time.)

Job Description The position is responsible for assisting in the architecture, design and administration of various physical and private/public cloud-based infrastructure, support and management of multiple operating systems and associated server hardware and cloud. This position ensures installation, upgrade, change control, real-time monitoring, accuracy, coordination, troubleshooting, problem resolution, capacity planning, backup and recovery, and disaster recovery (DR) architecture, design and planning for systems supported. Experience with industry leading scripting/automation toolsets and product suites. 24x7 availability in an OnCall rotation is required. This position requires comprehensive knowledge within a functional area. Work is performed under general direction and is reviewed upon completion for adequacy in meeting objectives and to ensure compliance with processes, standards and policies of the organization. Provides technical solutions to a wide range of difficult and complex problems. Solutions are imaginative, thorough, practical, and consistent with the objective of the organization. May train and mentor less experienced professionals. Essential Duties & Responsibilities: Serve as a primary resource for the design, administration and monitoring of our physical and cloud-based Infrastructure systems and technologies. Maintain understanding of future direction of technologies and products for application or IT systems supported. Analyze, administer, modify, configure and lead patch management for multiple, complex, and/or advanced operating systems. Design, implement and provide real time support and updates for servers and datacenters. Plan or support all phases of moderately complex projects. Implement consistent project management processes and standards for area of specialization. Provide project cost estimates for consideration in functional budget. Provide input to planning groups on the impact of prospective upgrades and work effort required. Perform impact analysis of new or expanding systems and coordinate with personnel to determine upgrades necessary to meet service level requirements. Ensure a high degree of accuracy, coordination and administration of respective data centers, systems and applications. Assist in coordination, and monitoring of systems and system software for problems or needed modifications. Install and upgrade application & infrastructure systems (i.e. operating systems, storage systems, Data Center hardware) independently. Maintain systems including installation of patches, performance monitoring, capacity planning, and tuning. Establish, test, and implement procedures for application or data backup and recovery. Develop, test, implement, and maintain disaster recovery infrastructure, plans and procedures. Provide direction to less experience administrators or technicians on department processes and complex technical issues. Provide 24x7 coverage via an OnCall rotation Minimum Education & Experience: Bachelors Degree in Information Systems, Information Technology, Engineering, and/or related discipline. In lieu of a degree an additional three (3) years' directly related experience will be considered. Minimum of five (5) years' of directly related experience. Preferred Qualifications: Experience planning and executing migration of on-premises to cloud based server environments Azure certifications AWS certification Microsoft certifications Project management Knowledge, Skills, and Abilities: Comprehensive knowledge of Microsoft Server technologies 2016, 2019, 2022 including installation, support and management Comprehensive knowledge of Linux server environments and OS installation & management. Comprehensive knowledge of most aspects of IT design & administration for on-prem, private cloud and public cloud solutions. Comprehensive experience with multiple toolsets and technologies: Microsoft Active Directory, Microsoft Exchange, Microsoft Office 365, Windows Severs, Linux Servers, AWS SysOps, VMware vSphere (ESXi)/NSX, Dell Hardware, Rubrik, Solarwinds monitoring, Azure, AWS, other Cloud based computing. Comprehensive knowledge of fundamental networking/distributed computing environment concepts, such as TCP/IP, DNS and DHCP. Comprehensive knowledge of DevOps toolsets, such as GitHub, Terraform and Ansible. Strong analytical skills and experience; ability to recognize, analyze and solve complex problems. Ability to coordinate the work of third-parties to ensure effective and timely solutions for integration projects and day-to-day troubleshooting. Ability to apply principles of logical thinking to define problems, collect data, establish facts and draw conclusions. Ability to distill data and analysis into high-level reports and summaries. Ability to discern data inaccuracies through technical experience and knowledge. Ability to develop system solutions for operational problems. Ability to write technical instructions in the use of programs and/or program modifications. Ability to plan, implement, test, and troubleshoot system software. Strong collaboration skills to partner effectively across various levels of the organization. Strong oral and written communication skills with the ability to communicate at all levels of the organization. Ability to communicate technical guidance and instruction to users on the use of systems and/or applications. Strong organization and process improvement skills. Ability to effectively handle pressures and demands of deadlines and competing priorities. Ability to handle confidential information and material with the highest degree of professional responsibility. Ability to interact with internal business partners at a senior and management level to clarify requirements and business needs for changes and enhancements. Ability to prioritize tasks to meet business needs, including prioritizing the work of others on the team, when needed. Ability to learn and utilize a working knowledge of broad business environment, energy industry, and corporate operations. Ability to interact in a team environment. Proficient use of Microsoft Office Suite Working Conditions: Ability to produce quality work and meet deadlines in fast paced environment Ability to work non-standard work hours as needed or required to meet established deadlines Ability to work indoors, in an office environment, regardless of whether cubicle, open office or private office Subject to normal office noise levels

Job Description Job Summary: Montclair Breast Center, a member of Genesis Health, is dedicated to saving lives through proactive healthcare. Our patients enjoy the unique experience of state-of-the-art, personalized care linked seamlessly to the latest screening, diagnostic and preventive technologies. MBC is seeking a mammography tech, responsible for detecting breast tissue abnormalities by completing mammographic imaging studies; presenting them for diagnosis. Essential Functions: • Minimizes radiation to patient and staff by practicing radiation protection techniques. adjustments for optimum results; retaking mammograms as required; forwarding completed studies to radiologist for interpretation. inventories. • Maintains safe, secure, and healthy work environment by following, and enforcing standards and procedures., • Documents patient mammogram services by completing patient record charting., • Quality Assurance- daily, monthly test on mammo stereo bone density., • Making CO’s + downloading., • Risk Assessment on all patients., • Also see attached Flat Field Digital QC Tests 2000DS, Flat Field Digital QC Test Essential, and QA Assurance Policy. Qualifications: • Current State License and ARRT registry, • Specialized training in mammography (continuing education/certificates), • Continuing education- this requirement specifies that an average of 5 ECE’s/year be specific to mammography), • Continuing experience in mammography (effective 4/1999), • High school graduate or equivalent, • Current BLS- Preferred, • Technologists (ARRT) and/or Certified Radiologic Technologist (CRT) Certified sonographer., • Mammographic Radiologic Technology certified., • Able to operate sophisticated computer equipment, • Strong interest in scientific and technical skill and knowledge, • Able to interact compassionately and effectively with the sick or injured, • Able to communicate effectively, • Able to perform well independently, • Able to follow detailed instructions, • Exact and precise, • Highly self-motivated Lifting Requirements Heavy lifting: up to 100 lbs. maximum with frequent lifting and/or carrying objects weighing up to 50lbs. Must be able to stand, stoop and lift and walk without restrictions Workplace Conditions: Workplace Environment Conditions • Medical office environment, • The noise level in this workplace is mild to moderate Visit us at MBC is part of Genesis Health and Genesis Global Group and is an equal opportunity employer. Company DescriptionGenesis Global Group is a privately held collection of vertically integrated domestic and international companies that delivers deep expertise, objective solutions, customized products and unparalleled service spanning the sectors of biotechnology, health care, manufacturing, real estate, and hospitality.Genesis Global Group is a privately held collection of vertically integrated domestic and international companies that delivers deep expertise, objective solutions, customized products and unparalleled service spanning the sectors of biotechnology, health care, manufacturing, real estate, and hospitality.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Electrical Engineering Systems to lead electrical system design and execution for the Company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Electrical Distribution (facility and plant electrical architecture and integration)- Power Electronics (development of high-power converters and HTS magnet power supplies)- Electronics Systems Engineering (embedded control and instrumentation electronics, including custom PCBAs) This role will own the end-to-end delivery of electrical systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning power systems, power electronics, and embedded electronics, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the plant-level electrical architecture, including utility interface, substation and distribution design, grounding and protection philosophy, and power quality and reliability strategy., • Guide system modeling and simulation efforts including load flow, short-circuit, and transient studies, and ensure models remain consistent with evolving load envelopes and operating modes., • Lead integration strategy for compensation and storage assets such as STATCOM for load shaping, ride-through capability, and power recovery as applicable., • Own the technical interface to external engineering, procurement, and construction partners and utilities, including technical specifications, design reviews, and factory and site acceptance participation., • Oversee development of high-power converters and magnet power supplies, including topology selection, protection concepts, thermal strategy, and integration with embedded controls., • Develop test strategy and execution: prototype bring-up, staged-load validation, failure mode exploration, parameter tuning, and readiness evidence for integration., • Own hardware architecture for embedded control and instrumentation electronics that interface power conversion hardware, diagnostics, and control firmware., • Lead electromagnetic compatibility and noise mitigation strategy across boards, cabinets, and system integration boundaries., • Partner with systems engineering to translate device requirements into electrical requirements, interface definitions, and verification plans., • Run evidence-based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface definitions, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including electrical safety, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands-on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering or equivalent., • 10 or more years of relevant experience spanning two or more of the following: power systems, substation and distribution, power electronics, embedded electronics, controls hardware, industrial electrical infrastructure., • 5 or more years of engineering management experience leading multi-team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in electrical safety, high voltage and high-power engineering practices, and engineering standards and documentation discipline., • Strong cross-functional communication skills and experience driving technical decisions across physics, mechanical, controls software, safety, and program teams., • Experience delivering electrical systems for fusion, accelerator facilities, advanced nuclear, large industrial plants, or other high power research facilities., • Experience with utility interconnection processes, protection coordination, and power quality mitigation., • Experience with battery energy storage systems, static compensators, and dynamic load environments., • Experience establishing verification and validation processes and configuration control for hardware programs., • Familiarity with electromagnetic compatibility practices for high power switching environments and mixed-signal instrumentation., • Power system analysis: ETAP, DIgSILENT PowerFactory, PSCAD, SKM, CYME., • Power electronics simulation and design: PLECS, LTspice, Simulink, Altium or OrCAD., • Electronics design and lab: Altium or OrCAD, oscilloscopes, logic analyzers, power analyzers, electronic loads.Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Control, Instrumentation and Diagnostics (CID) Systems to lead CID system design and execution for the company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Control Systems (Eos control system architecture and integration, including fast data acquisition, PLC automation, Safety and Interlock Systems)- Instrumentation Systems (instrumentation backbone across the facility, including sensors, signal architecture, wiring, grounding, shielding, tagging, and commissioning practices)- Diagnostics Systems (plasma diagnostics control and acquisition, including real time DAQ, timing and synchronization, and low latency data pipelines for plasma control) This role will own the end-to-end delivery of CID systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning control systems, instrumentation, diagnostics acquisition, embedded software, and real time integration, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the Eos CID architecture, including functional, physical, communications, timing, and data flow boundaries across fast DAQ, supervisory control, PLC automation, safety interlocks, and diagnostics acquisition., • Lead technology selection for real time control, SCADA, networking, timing, and data management, and ensure consistency across integration protocols and data interfaces., • Own the technical interface to external vendors and collaborators providing controls hardware, diagnostics hardware, and instrumentation deliverables, including technical specifications, design reviews, and acceptance participation., • Oversee development and integration of the Eos control system across major subsystems, ensuring deterministic behavior, fault handling, and operational sequencing., • Own Safety and Interlock System philosophy, including safety class logic where required, participation in hazard analyses, and alignment to functional safety practices and standards., • Own instrumentation architecture across the facility: sensor selection, signal types, isolation strategy, signal conditioning, grounding, shielding, and segregation practices for noisy, high power environments., • Oversee diagnostic acquisition architecture end to end, from front end sensors and conditioning through digitizers, FPGA processing, data streaming, and archiving in support of plasma operations and feedback control., • Partner with systems engineering to translate device requirements into CID requirements, interface definitions, and verification plans., • Run evidence based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface control documents, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including machine protection thinking, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering, Controls, Computer Science, Physics, or equivalent., • 10 or more years of relevant experience spanning two or more of the following: integrated control systems, industrial automation, fast data acquisition, instrumentation systems engineering, diagnostics acquisition, real time embedded software., • 5 or more years of engineering management experience leading multi team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in safety and high reliability engineering practices, including interlocks, alarms, fail safe design, and disciplined documentation., • Strong cross functional communication skills and experience driving technical decisions across physics, mechanical, electrical, safety, and program teams., • Exceptional work ethic and communication skills., • Experience delivering CID systems for fusion devices, accelerators, advanced nuclear, or other large scientific facilities with tight timing and data fidelity requirements., • Experience with EPICS or TANGO, and industrial integration protocols such as OPC UA, DDS, Modbus, and deterministic timing networks., • Experience with functional safety workflows and standards driven PLC systems engineering., • Experience with FPGA based acquisition and low latency streaming pipelines for real time feedback and machine protection., • Familiarity integrating AI and digital twin capabilities into supervisory control and operations workflows., • Control frameworks and integration: LabView, EPICS, TANGO, OPC UA, DDS, Modbus, TCP IP., • PLC platforms: Siemens TIA Portal, Beckhoff TwinCAT, Allen Bradley, Codesys, IEC 61131 3 practices., • Timing and synchronization: White Rabbit, IEEE 1588 PTP., • Data acquisition and diagnostics: PXIe digitizers, FPGA platforms, event and timestamping frameworks, data streaming infrastructure., • Embedded and middleware software: real time embedded Linux and real time operating systems, C and C++, distributed orchestration tooling., • Instrumentation design and documentation: AutoCAD Electrical, EPLAN, tag databases, input and output lists, cable schedules and loop diagrams.Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Senior Electrical Distribution Systems to lead the design, specification, and integration of the power supplies, power distribution network, grid interface, STATCOM, and energy storage systems for the company’s Eos integrated stellarator. This role combines high-voltage substation and distribution infrastructure design with simulation-driven development of plant-wide energy management strategies. This role will be responsible for defining and validating the full electrical infrastructure, ranging from the high/medium-voltage power supply systems, power generation units, HV/MV utility interconnection, and substation architecture to backup generators and BESS platforms. You will interface with external EPC and utility partners, while driving internal technical requirements, simulations, and review processes across the design, procurement, and commissioning lifecycle. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the design of the Eos power distribution architecture, including power supply systems, medium and high-voltage distribution, MV switchgear, LV panelboards, and critical backup circuits., • Define grounding, neutral earthing, surge protection, and lightning protection strategies for plant-wide electrical infrastructure., • Evaluate integration of grid interconnection, backup generators, STATCOM, and Battery Energy Storage Systems (BESS) for load balancing, UPS capability, and magnet power recovery., • Run detailed load flow, short-circuit, and transient stability simulations using tools such as ETAP, DIgSILENT PowerFactory, or PSCAD., • Model time-varying load profiles for power supply systems and estimate steady-state vs. transient energy demands., • Contribute to the plant’s overall power management strategy, load shedding philosophy, and power quality targets., • Develop technical specifications, single-line diagrams, protection philosophies, and equipment layouts., • Lead development of technical requirements for external EPC firms responsible for final design, construction, and commissioning., • Participate in design reviews, FAT/SAT, vendor interface, and field verification of electrical systems.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or related field., • 7+ years of experience in power systems engineering, including substation design, grid integration, or industrial distribution infrastructure., • Experience with medium- and high-voltage distribution (up to 230 kV preferred), transformer selection, protective relaying, and electrical safety., • Proficiency in electrical system modeling and simulation tools, such as ETAP, PowerFactory, SKM Power Tools, or PSCAD, • Strong understanding of IEEE, NFPA, IEC standards, grounding calculations, and utility interconnection requirements., • Experience in power systems for fusion devices or accelerators., • Familiarity with BESS systems, UPS, and energy management systems (EMS)., • Experience coordinating with utility providers, EPC contractors, and third-party interconnection consultants., • Understanding of power supply dynamic behavior (e.g. magnet loads, pulsed systems) and interaction with grid stability., • Knowledge of SCADA/EMS integration, protective device coordination, and commissioning procedures., • Simulation & Analysis: ETAP, PowerFactory, PSCAD, SKM, CYME., • CAD & Design Tools: AutoCAD Electrical, EPLAN, Revit MEP., • Exceptional work ethic and communication skills.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Power Electronics Engineer to design and develop the HTS magnet power supply systems for the company’s Eos integrated stellarator. This role focuses on building a high-current AC-DC converter for HTS magnets, requiring precision current regulation, high reliability, and scalable architecture. This role will be responsible for power stage design, topology selection, control algorithm interface, and protection systems, as well as thermal and mechanical integration. This is a high-impact engineering role with hands-on prototyping, testbed validation, and cross-functional collaboration with embedded systems and instrumentation teams. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the topology selection, component specification, and schematic design of the HTS Magnet PSU., • Design modular power converters with potential for arrayed operation and independent control., • Analyze and simulate power converter behavior (steady-state, dynamic, fault response) using PLECS, LTspice, or Simulink., • Integrate with embedded control hardware and firmware, ensuring proper current regulation, fast feedback, and fault handling., • Define and implement magnet protection mechanisms, including overcurrent shutdown, fast discharge, and crowbar circuits if needed., • Design thermal management systems, including heat sink layout, forced air/water cooling, and temperature monitoring for continuous operation., • Design PCB layout and support mechanical integration, cabling, and in-house assembly., • Develop test plans and perform hardware bring-up, debugging, and parameter optimization under staged load conditions.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Electronics, or a related field., • 5+ years of hands-on experience designing and testing power converters, preferably in high-current or magnet power supply applications., • Proficiency in power stage design for DC/DC converters, buck/boost, full-bridge, or current-regulated linear stages., • Strong simulation and modeling skills using tools such as PLECS, LTspice, PSIM, Simulink, or Simplorer., • Experience with IGBTs, MOSFETs, SiC/GaN devices, and high-current busbar and interconnect layout., • Familiarity with current sensors, signal conditioning, and analog control circuits., • Experience with magnet power supplies, fusion, accelerator, or industrial high-current systems., • Knowledge of quench detection, crowbar protection, and superconducting magnet interface requirements., • Experience with thermal design and integration of cooling solutions in power electronics., • Exposure to EMI/EMC mitigation strategies and compliance testing., • Familiarity with FPGA- or DSP-based digital control systems., • Simulation: PLECS, LTspice, PSIM, Simulink., • CAD: Altium Designer, OrCAD., • Measurement: Oscilloscopes, Power Analyzers, Electronic Loads., • Communication: CAN, RS-485, Modbus., • Thermal: Flotherm, SolidWorks for mechanical integration.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Job Title: Traveling Dental Assistant Department: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is the fastest growing dental organization on the East Coast and Midwest. Our premier DSO is led by world class dentists who understand what highly skilled dentists and dental professionals need to grow a practice while focusing on delivering the best-in-class clinical care to their patients. We offer up-to-date equipment and technology, experienced and friendly staff, and dentists who truly care about their patients, as well as competitive pay and, where applicable, a benefits package that includes medical, dental, vision, 401(k), training, and career growth opportunities. Position Summary As a Traveling Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a Dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Position will travel to: Dental Health Associates of North Brunswick, Quality Dental Care - Vineland, Brighter Dental - Delran, Dental Health Associates of Phillipsburg, Brighter Dental- Princeton Duties and Responsibilities • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintaining inventory control in the operatories where treatment is rendered by the Provider, • Adhering to OSHA, HIPAA, and CDC guidelines, • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping, • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • Maintaining public area appearance, • High School diploma or GED required, • X-ray License required, • Easily able to learn new technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately, • 1+ years work experience as a Dental Assistant preferred, • Ability to work in a fast-paced environment, • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed, • Knowledge and Skills/Expected Competencies, • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines., • Active CPR Certification is required. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR hK4L3DmszU

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton NJ Inbound/Internal Transfers Warehouse Operations ManagerAbout the role The ideal candidate will be responsible for managing warehouse operations in our Clifton, NJ location. The Inbound/Internal Transfers Operations Manager will ensure the Clifton facility's inbound and internal transfer processes operate safely, efficiently, and accurately. This role will prioritize workplace safety, oversee inbound freight scheduling, receiving, put away accuracy, internal stock movements, and dock-to-stock cycle times to maintain high service standards and inventory readiness for downstream operations. Responsibilities: • Safety, dock-to-stock Efficiency, inbound inventory accuracy, internal transfer accuracy & timeliness, and people management., • Lead Inbound & Internal Transfers – Serve as the senior leader for all inbound functions (unloading, inspection, put away) and own internal stock transfers between zones/buildings/sister facilities, including scheduling and documentation to keep materials flowing., • People Leadership & Development – Mentor and coach inbound team leaders and supervisors; set clear expectations, create development plans, provide ongoing feedback, and build a high-performance, accountable culture., • Inbound Labor Planning & Productivity – Optimize staffing for inbound peaks and container/truck schedules using forecasts and internal tools; deploy labor to demand, meet productivity KPIs, and address performance gaps quickly., • Operational Excellence & Inventory Accuracy (Dock-to-Stock) – Eliminate receiving-dock bottlenecks by enforcing SOPs and standardized workflows; improve receiving checks, run root-cause analysis on discrepancies, take corrective actions, and process goods within target timelines., • Safety & Compliance – Prioritize a safe inbound work environment through proactive dock safety monitoring, safety training, and adherence to all compliance requirements to minimize incidents and liability., • Cross-Functional Alignment, DC Capacity & Cost Control – Partner with procurement, transportation, replenishment, and outbound to align inbound scheduling and transfers; collaborate on space utilization and peak planning; reduce waste and costs in labor, detention/demurrage, and space usage., • Contribute to team effort by accomplishing related results as needed., • Work in an environment where the noise level varies and can be loud, • Work in an environment where the temperature can be low.(refrigerator temperature at or below 40°ree; F (4°ree; C). The freezer temperature should be 0°ree; F (-18°ree; C), • Able to stand/walk for up to 12 hours during shiftsQualifications, • Bachelor's degree (or equivalent experience), • 10+ years in warehouse or manufacturing operations, • 5+ years in a supervisory or management role, • Experience with Warehouse Management Systems (WMS), • Proficient computer skills (Excel, reporting tools), • Knowledge of health & safety regulations (OSHA), • Experience managing high-volume or fast-paced distribution environments, • Proven track record of leading large teams (50+ associates), • Strong understanding of inventory control and cycle counting processes, • Demonstrated success in reducing labor costs or improving productivity metrics, • Bilingual (Spanish), • Six Sigma (Green Belt), • Food Safety Certification, • OSHA Certification, • Project management certification, • Prior experience in Automated warehouses/manufacturingCompany Benefit, • Comprehensive health insurance package, including medical, dental, and vision, • 401k match, • Bi-annual Performance bonus, • Vacation and holiday time off, • The US base salary range for this full-time position is $92,000 - $108,000, • This role may be eligible to discretionary bonus, incentives and benefits, • Our salary ranges are determined by role, level, and location The range displayed on each job posting reflects the minimum and maximum base salary for new hires for the position across all US locations. Within the range, individual pay is determined by multiple factors like job-related skills, experience and work locations. Your recruiter can share more about the specific salary range during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at . For more jobs and to find out more about Weee!, visit our career page: Softbank Vision Funds

Job DescriptionService Manager - Essex County, NJ ABOUT HONEYGROWhoneygrow is a thriving Philadelphia-based fast-casual restaurant with a growing number of locations in the mid-Atlantic and northeast regions. Founded on the principles of bringing people together over quality, wholesome, and simple foods, honeygrow remains committed to its roots. Yet it's our key ingredient – our team – that truly propels and differentiates us in becoming a sustaining, great brand. We believe that our team members are the heart and soul of honeygrow, driving our success and embodying our core values of grit, pride, compassion, and focus. At honeygrow, creating and building a distinctive brand is in our DNA. As a company on the cusp of substantial growth, we are looking for like-minded individuals who share our passion and values to join us in shaping the future of honeygrow. We invite you to be a part of our story and contribute to our journey as we continue to redefine the fast-casual dining experience. honeygrow’s success depends on our people. Our restaurants can only prosper and provide opportunities for employment and growth when we continually improve ourselves, and the work we do. We believe that a commitment to uncompromising values and integrity should always support our decisions and actions as we pursue our goals. The following Core Values will guide our team as we move forward: • Work hard at work worth doing, • Your work directly betters people’s lives and happiness, • Enlighten each other to enlighten our guests, • Always be learning, always be improving, • Be mindful of your surroundings, • Exceed expectationsBENEFITS:, • Paid Time Off: Enjoy earned paid time off and one week of sick time granted annually., • Holiday Closures: Closed on Thanksgiving, Christmas, New Year’s Day, Memorial Day, Fourth of July, and Labor Day., • Financial Wellness: 401(k) with company match and free financial wellness counseling, • Insurance: Medical, Dental, Vision, FSA, Commuter Benefits, and Pet Insurance for qualifying employees., • Rewards: Achieve your work goals and get gift cards to popular retailers., • Wellness, Perks, & Discounts: Health resources and exclusive savings on entertainment, shopping, and hotels., • Meal Benefits: Free shift meals and discounts on meals and drinks on your days off., • Competitive Pay: Earn competitive wages plus tips, with instant access to your earnings via DailyPay., • Performance Reviews: Annual performance reviews with merit increases for qualifying employees., • Referral Bonus: Earn up to $500 for referring a friend., • Anniversary Gifts: Celebrate your work anniversaries with special gifts., • Career Growth: Opportunities for advancement and training in culinary and hospitality.ROLES + RESPONSIBILITIES:, • Lead honeygrow restaurant operations through understanding and enforcing all policies, procedures, standards, training programs, and cultural points., • Strive to be a honeygrow top performer, someone who has the desire and ability to perform excellent work, and whose constant effort elevates them, their team and honeygrow., • Support the General Manager in teaching the team how to be top performers empowered to achieve hg Standards., • Demonstrate integrity, honesty, knowledge, and the ability to exceed expectations of guests and team members alike while promoting the culture, values, and mission of honeygrow., • Fully comprehend and be able to perform every station in the restaurant and be trained on all functions through the Service Manager level., • Oversee cash management, nightly report packaging, and all other administrative work relative to daily operations., • Actively train, coach, and develop all employees with patience and diligence., • Ensure that we deliver a fantastic guest experience executing our hg Engine efficiently with every guest on every shift. Our hg Engine is comprised of speed, accuracy, cleanliness, superior product, and hospitality., • Ensure that we follow all the food safety guidelines and procedures., • Effectively supervise scheduled shifts., • Uphold the restaurant to hg facilities standards and lead the restaurant’s preventative maintenance plan., • Complete facilities and food safety processes, including but not limited to completion of opening/closing checklists, line checks, and daily/weekly cleaning checklists.REQUIREMENTS:, • Must be at least 18 years of age., • Must be able to meet the scheduling needs of the restaurant., • Strong food prep experience., • ServSafe Certification preferred., • Previous training experience preferred., • Minimum one year of restaurant experience.PHYSICAL REQUIREMENTS:, • Must be able to stand and walk for extended periods., • Must be able to lift and carry up to 50 pounds., • Must possess close vision, distance vision, and peripheral vision., • Must be able to frequently bend, stoop, and reach., • Must have dexterity to handle kitchen equipment., • Must be comfortable working near open flames., • Must be able to work in a fast-paced environment with hot and cold areas., • Must be able to work in tight spaces. The estimated range is the budgeted amount for this position. Final offers are based on various factors, including skill set, experience, location, qualifications and other job-related reasons.

Job DescriptionManufacturing Associate II Allendale, NJ Lynkx Staffing specializes in placing Biotechnology, Pharmaceutical, Medical Devices, IT & Human Resources professionals in New Jersey. Under the supervision of the Associate Manager, the Manufacturing Associate II processes, cultures, cryopreserves and otherwise manipulates cell products using aseptic techniques, according to written Standard Operating procedures, in accordance to facility GLP, GTP and GMP practices. Facility and personnel specific responsibilities will be regulated by company's policies or client procedures being performed at each Cellular Production Facility. The ideal candidate must have a collaborative and inquisitive nature, must possess excellent organizational and verbal and written communication skills and be flexible in their working hours. • Performs any and all required processing and manipulation required to produce and assess safe and efficacious products, • Proficiently functions within an ISO Class 7 and 6 clean room environments, ensuring personal and product safety, • Consistently produce a high level of documentation accuracy and clarity, • Performs cryopreservation of products using DMSO base solutions and controlled-rate freezers, • Proficiently operate and maintain equipment according to designed procedures. Assigned responsibilities could include but is not limited to COBE 2991 cell washer, Clinimacs cell separator, Elultra cell separator, controlled- rate freezers, temperature monitoring systems, alarm systems, biological safety cabinets, CO2 incubators, liquid nitrogen freezers, microscopes, pipets, wave bioreactors, refrigerators, ultra- cold freezers, water baths, tube sealers, dry shippers, centrifuges, sterile connection devices, • Manipulate products according to established standard operating procedures and batch records such as enrichments, depletions, cell expansions, or volume reductions to achieve predetermined endpoints, • Participating in clinical trial support and studies, may include but not limited to sample preparation, sample shipping, media and reagent preparation., • Thawing and/or washing cryopreserved hematopoietic cell products either at the Clinical Site or in the facility as specified by standard operating procedures, • Performing facility and equipment duties such as periodic maintenance, preventive maintenance, for applicable methods and equipment, reporting facility and equipment problems to Assistance Manager, trouble-shooting facility and equipment problems as specified in standard operating procedures, • Notifying Management of any deviation that may occur during processing or during equipment maintenance., • Applies knowledge of processing principles and techniques to make good judgement and appropriate decisions, • Performs investigations for deviations and complete deviations and CAPA’s (Corrective and Preventive Actions) in a timely manner, • Supports technology transfers into GMP manufacturing operations, • Participate in the on-call programREQUIREMENTS, • BA/BS or Associate's Degree in a biologics or related field preferred, • 2-4 + years of applicable experience in a clinical laboratory, hematology, blood banking, immunology or cGMP manufacturing, • Current Medical Technologist license or equivalent is a plus, • Aseptic/cell processing and clean room experience preferred, • Demonstrates tact and courtesy in dealing with others, • Strong work ethic, methodical approach to new challenges, • GLP and GMP experience a plus, • Must be able to work independently and with minimal supervision, • Able to work in fast paced environment at times under pressure and with tight deadlines, • Excellent organizational skills and attention to detail, • Good verbal and written communication skills, • Strong team-oriented interpersonal skills are essential, • Ability to think strategically and tactically (detail-oriented), • Strong collaborative and influencing skills and ability to work well in a cross-functional, matrixed environment, • Analytical and problem-solving skills, • Strong written and oral communication skills, • Ability to multi-task team is essential, • Flexible and able to adapt to company growth and evolving responsibilities, • Ability to work a flexible schedule that may include nights, weekends and/or holidays, • Training Required; GMP, Gowning training/qualification, Aseptic process qualification (personal media fill), • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays and as required by the companyWorking EnvironmentMay be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluidsMust utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogenMust have the ability to work in the cleanroom environment for extended period of timeMust have the ability to work with specialized equipmentMust be able to handle the standard/moderate noise of the manufacturing facility Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionQuality Assurance Compliance SpecialistAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Devices industries in New Jersey. This position will report into the Associate Manager of Quality Compliance. Responsible to perform Quality Assurance Compliance activities in support of Quality Systems and/or client procedures, including but not limited to, document. management: investigations, CAPA, SOPs, qualification and validation reports, QC data. Supports Quality management with various department, organizational and operational excellence initiatives. Generally, exercises independent judgment, within generally defined practices and policies, when selecting methods and techniques for obtaining solutions. This role supports internal and external audits which may include interaction with Health Authorities and clients. • Liaises with relevant functional groups (Operations, Facilitates, QC, EH&S) to provide guidance through all stages of the investigation / CAPA processes., • Develops and communicates investigation strategy to key stakeholders., • In order to close investigation and CAPA, collect necessary information from appropriate department to close in quality system and maintain investigation and CAPA log, • Reviews and approves investigations and CAPAs;, • Conducts weekly status update meetings with cross functional departments and other stakeholders., • Monitors DR/CAPA KPIs including reporting requirements, provide detailed updates and information in support of quality & business review to management on periodic basis., • Prepares and issues change control as necessary., • Adherences and champions to all compliance regulations as required by regulatory agencies and per the Company’s processes and procedures., • Ensures appropriate CAPAs are generated to increase compliance and prevent repeat occurrences of deviations., • Conducts trend analysis of compliance related metrics such as deviations and CAPAs., • Performs supplemental investigations and/or participates in project teams or assignment as necessary., • Support in agency, internal and/or client audits., • Functional/Technical Skills: has the functional and technical knowledge and skills to do the job at a high level of accomplishment., • Decision Quality: Makes good decisions (without considering how much time it takes) based upon a mixture of analysis, wisdom, experience, and judgment; most of his/her solutions and suggestions turn out to be correct and accurate when judged over time; sought out by others for advice and solutions., • Drive for Results: Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom-line oriented; steadfastly pushes self and others for results., • Written Communication: Able to write clearly and succinctly in a variety of communication settings and styles., • Peer Relationships: Quickly find common ground and solve problems for the good of all; can represent his/her own interests and yet be fair to other groups; can solve problems with peers with a minimum of noise; is seen as a team player and is cooperative; easily gains trust and support of peers; encourages collaboration; can be candid with peers.REQUIREMENTS, • BS biological sciences or other relevant field of study., • 5 years’ + experience in QA in a life sciences company with a strong focus in the manufacturing and/or testing of biologics preferred., • Experience in authoring, reviewing, and /or approving cGMP/cGTP related documents (Investigation report, CAPA report, SOPs etc.) required., • Understanding of quality system applications, including the use of electronic applications for training, deviations, CAPA management, etc., • Familiar with FDA, ISO, and other regulatory agency guidelines., • Understanding of Good Manufacturing Practices (GMP), Good Documentation Practices (GDP) and Good Laboratory Practices (GLP) required., • Working knowledge and technical understanding of aseptic manufacture of biologics preferred., • Experience in both clinical and commercial manufacturing is preferred., • Experience in supporting health authority inspections and/or client audits preferred., • Minimum Required Training (optional); GXP training, SOP & WI training, Safety Training, • Understanding and comprehension of quality system applications.Working Environment Must be able adaptable, collaborative, accountable, and have a “can-do” pioneering spirit.Must be able to work in a team-oriented environment.Must be able to work occasional weekends, nights, and/or holidays as required/necessary.May be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids.Must be able to handle the standard moderate noise of the manufacturing facility.Must be able to work in open floor plan environment and may work in close proximity to others.Wheel-o-Vator available for use.Small breakroom available. No on-site cafeteria available.Able to utilize equipment in manufacturing are as well QC laboratories.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

This is not a job offer from the Transportation Security Administration (TSA). Stay focused in a high-noise, high-pressure environment (alarms, crowds, time pressure, and sometimes disruptive or angry passengers). Paid, unpaid, and volunteer experience may be credited.

Works efficiently in fast paced kitchen environment, and may work at different positions - Front counter, Drive Through or Kitchen. Kitchens are hot and noise levels are usually high; storage space is limited and shelving is high. Join us as a Kitchen Team Associate.

Job Description Butler Hospitality is operating the Food and Beverage Departments within our partner hotel The Holiday Inn in Hasbrouck Heights, NJ. Full-time & Part-time US-based position and authorized to work in the US Location: The Holiday Inn, 283 Route 17 South, Hasbrouck Heights, NJ 07604 You Will • Greets and welcome all guests in a pleasant and professional manner, • Prepare drinks for guests and cocktail servers, • Communicate effectively over the phone and in-person with lots of background noise, • Handle purchasing transactions, including operating cash register and accounting daily sales, receiving payments and issues receipts and change as needed, • Maintain a clean and organized work environment, • An outgoing personality, professional appearance, and demeanor, • Work any shift any day, • In-depth knowledge of wines, spirits, beers, and liquors., • A well-groomed appearance, • An ability to work on weekends, holidays, and peak business periods, • Compensation: from $17.50 plus tips, depending on experience, • Health, dental benefits, and a 401k plan., • Shifts vary, • Breakfast, lunch, and dinner shift meals, • Uniforms & paid training, • Resume (if possible), • 2 forms of ID, • References (with name, phone number, and/or email address) #LI-DNI Powered by JazzHR OhaaySv6xI

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES: · Ensure that all track personnel perform their assigned duties safely, effectively and professionally · Ensure that the daily attendance log is completed by all staff members · Coordinate with Assistant and General Managers regarding disciplinary and operational issues · Prepare track and karts prior to opening · Instruct new customers on proper kart usage, race flag usage, and racing safety · Maintain an orderly and speedy flow of racers through the track(s) · Supervise ongoing races and enforce race policies and procedures · Respond to emergency situations as they arise · Ensure that the pit and track areas remain clean and safe · Perform specific facility cleaning and maintenance duties as assigned by management · Perform closing duties to secure the pit and track and prepare for the following day’s operation EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively before groups of customers and respond to questions. MATHEMATICAL SKILLS: Ability to add, subtract and manipulate two digit numbers. PHYSICAL DEMANDS: Amount of Time Under 1/3 To Over None 1/3 2/3 2/3 Stand |____|_________|_X| Walk |____|_________|_X| Sit |____|____|______| Use hands to finger, handle, or feel |____|_________|_X| Reach with hands and arms |____|_________|_X| Climb or balance |____|___X___|____|______| Stoop, kneel, crouch, or crawl |____|___X___|____|______| Talk or hear |____|_________|_X| Taste or smell |____|___X___|____|______| This job requires that weight be lifted or force be exerted. Amount of Time Under 1/3 To Over None 1/3 2/3 2/3 Up to 10 pounds |____|_________|_X| Up to 25 pounds |____|________| Up to 50 pounds |____|___X___|____|______| More than 50 pounds |____|___X___|____|______| This job has special vision requirements. · Close vision (clear vision at 20 inches or less) · Distance vision (clear vision at 20 feet or more) · Color vision (ability to identify and distinguish colors) · Peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point) · Depth perception (three-dimensional vision, ability to judge distances and spatial relationships) Specific job duties that require the physical demands selected above: · Manipulating the position and orientation of racing karts and race track barriers · Utilizing racing flags and instructional signs as tools · Carefully running to assist customers in emergency situations WORK ENVIRONMENT: Work is performed predominantly in an indoor environment that is exposed through openings in the building to the outdoors. The work environment of this job typically has a moderate level of noise SUPERVISORY RESPONSIBILITIES: This is a supervisory position. This position is the first level of facility’s management team. It is the responsibility of the Pit Supervisor to ensure that established operational policies and procedures are followed by all track attendants. It is also the responsibility of the Pit Supervisor to coordinate with the Assistant Manager and General Manager regarding disciplinary action involving track attendants. The Pit Supervisor is the first point of contact for addressing customer issues. This position is responsible for between 10 and 20 track attendants.

Job Description AMBULANCE DRIVER JOB DESCRIPTION / (EMR) ESSENTIAL DUTIES AND RESPONSIBILITIES: Responsibilities • Drive ambulances safely and efficiently, • Help load and unload patients, • Provide first aid, such as bandaging or CPR, • Maintain the ambulance and ensure it's safe to operate, • Stock the ambulance with medical supplies, • Report accidents and emergencies to authorities, • Assist paramedics and emergency medical technicians, • Maintain patient records, including names, addresses, and travel times RESTRICTIONS: No employee is allowed to: • Engage in any activity contrary to company policy, • Smoke cigarettes while aboard Ambulance, • Eat, chew gum, or drink in vehicles or facilities while caring for or transporting clients., • Abuse clients in any way, physically or verbally, • Use profanity, argue with facility staff or engage in any fighting., • Loiter at facility QUALIFICATIONS: · Valid driver's license with a clean driving record · High school diploma or equivalent · CPR certification · Ambulance driver training · Basic knowledge of medical terminology and emergency procedures · Strong communication skills · Ability to remain calm under pressure EDUCATION: • Must have a minimum of a High School Diploma or GED, • Must obtain EMR certification prior to employment LANGUAGE SKILLS: • Ability to read, write, and interpret using basic English language and grammatical usage. Ability to understand and follow simple directions as related to job description. REASONING ABILITY: • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Must be capable of demonstrating various decision-making skills. PHYSICAL DEMANDS: • While performing the duties of this job, the employee is regularly required to talk or hear., • The employee frequently is required to sit, use hands or fingers, handle, feel, and reach with his or her hands and arms. The employee is frequently required to stand, walk, and stoop, kneel, crouch, or crawl., • The employee must frequently push, pull, lift and/or move more than 150 pounds by his or her self and 250 pounds with assistance., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: · May work indoors and outdoors · May be exposed to contaminants, sounds, and noise levels · May wear protective or safety attire

Job Description THE COMPANY In business since 1969, Interport modifies and sells new and used shipping containers, serving customers throughout the Northeastern U.S. Established in 2004, Interport Secure Parking operates 24/7/365 secure facilities in Newark, NJ and Savannah, GA where local and regional intermodal drayage truckers park and store loaded and empty import and export containers being transported for global cargo owners, ocean carriers, and third-party logistics providers. Interport proudly employs and empowers a diverse team of exceptional individuals committed to providing our customers superior products, services, and solutions. General Summary Reporting to the Operations Supervisor, the Sales Yard Equipment Operator is responsible for moving Interport sales units and other equipment throughout the Sales yard using 7-high/4-high container handlers, forklifts and yard hustlers. The Sales Yard Equipment Operator is also responsible for fueling equipment, inspect containers upon yard entry as required. Major Duties and Responsibilities • Operates 7-high/4-high container handlers, forklifts and yard hustlers, • Unloads inbound trucks and loads outbound trucks as needed, • Feeds containers to the Modifications department as needed, • Puts Sales and Modification units away in their proper locations, • Assists the Container QC Associate in moving containers for inspection, etc. as needed, • Keeps the Sales yard neat, organized, and safe at all times, • Re-fuels all equipment, • Acts as backup for various other tasks in the Sales yard including container inspection, • Completes special projects as required including removal of weeds, trash and debris from yard, office clean-up and various other indoor/outdoor repairs, • Uses an iPad or other electronic device to record information in the company’s software, • Pre-trips equipment on a daily basis and record information in the company’s software, • Remains cross-trained in other areas of the Sales yard, • High School Diploma or General Educational Development (GED), • Valid New Jersey driver’s license in good standing with a clean driving history, • Strong verbal communication and interpersonal skills, • Experience working with iPad technology Preferred • Ability to perform basic computer tasks, • Customer Service, • Committed, • Positive attitude, • Team-oriented While performing the duties of this position, the employee is frequently exposed to: • Heat and cold, • Noise The physical demands described here are representative of those that must be met by an employee to successfully perform the minimum requirements of this position: This is a full-time position and the hours of work are typically between 7:00 AM and 4:00 PM weekdays, with some weekends, when needed. Other Duties Please note that this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Morning Shift - 7:00 AM to 4:00 PM

Job DescriptionQuality Control Microbiology Engineer(s) I, II, III Quality Control Microbiology Engineer I The “Quality Control (QC) Microbiology Engineer I” will support two local sites serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of QC Microbiology, responsibilities of the QC Microbiology Engineer I will include but are not limited to: Microbiological Testing: • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Complete all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP).REQUIREMENTS, • Associates degree in a science or relevant field required, • Training in GxP/ GDP, Safety, • Minimum 0-2 years of experience or equivalent experience., • Microbiology testing or within the biopharmaceutical industry experience preferred., • Proficient with computer software; Microsoft Office, • Strong written and oral communication skills, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels, • Must be able to work during the weekend, holidays and as required by the company, • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer II The Quality Control Microbiology Engineer II will support two local sites serving as a support role to clinical and commercial production. The QC Microbiology Engineer II will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer II will include but are not limited to: Microbiological Testing:, • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Writing/conducting investigations pertaining to microbiological testing, • Develop and train QC Microbiology Engineer I personnel on relevant business processesREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 2-4 years of experience with microbiological testing or within the biopharmaceutical industry., • Training in GxP/GDP, Safety, • Proficient with computer software such as; Microsoft Office, • MODA/LIMS, • Familiarity with ISO and EU standards, • Strong written and oral communication skills, • Technical writing skills, • Technical training ability, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Occasionally personal protective equipment may be required including lab coat, latex gloves, safety glasses and/or respirator., • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer III The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer III will include but are not limited to:, • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experience, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility; Direct reports, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Must have the ability to work in a team-oriented environment and with clients., • Must be able to work during the weekend, holidays and as required by the company

Job Description Position Summary Must have availability and able to work Fridays, Saturdays, Sundays. Food and beverage supervisors are responsible for the daily operations of businesses that prepare and serve food and drinks to customers in the restaurants and Sky Boxes, in Simulcast, in the Food Court. Food and beverage supervisors oversee all of the issues pertaining to a patron's dining experience, such as quality control, staff management, inventory, health and safety regulations and customer service. Essential Duties and Responsibilities · Food and beverage supervisors are generally responsible for all of the business operations of a dining establishment. · Duties typically include training, scheduling and managing employees as overseeing inventory, including food and beverages, supplies and other restaurant equipment. · Supervisors are also responsible for resolving customer complaints regarding food quality and service and making sure the business complies with health and food safety regulations. • Supervisors also oversee food preparation, food storage and dining areas, ensuring that the facility remains in compliance with safety regulation and health codes., • In addition, they often have responsibility for the management of incoming funds and accounts payable. Qualification Requirements To successfully perform the duties of a food and beverage supervisor, individuals must possess a drive to provide exceptional customer service. Supervisors must be reliable and self-motivated. They must be excellent communicators to manage a team in a high-volume environment and carry out multiple tasks at the same time. Additionally, a degree of physical fitness is required, as many supervisors stand for long periods of time and lift heavy items. Education and/or Experience: While a four-year degree is not mandatory to land a food and beverage supervisor position, many employers prefer applicants that have a college education in hospitality management, food services management or a related field. Special Qualifications: Incumbent must be able to assist the Manager in as many ways as possible to make the restaurant run as smoothly as possible. Language Skills: Associate needs to be able to speak, write and read English, and Spanish would be a plus. Mathematical Skills: The ability to add and subtract Reasoning Ability: Ability to apply commonsense understanding to carry out instructions furnished in written, oral or diagram form. Incumbent needs to have the ability to deal with problems involving several concrete variables. Physical Demands The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the Associate is regularly required to talk or hear. The Associate is also regularly required to stand, walk, sit, and use hands to finger, handle, or feel objects, tools or controls. The Associate is occasionally required to reach with hands and arms, and to sit, climb or balance, and stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. The work hours include weekdays, evenings and nights, weekends, holidays. Certificates and Licenses • Must be authorized to work in the United States., • Must have or be able to obtain a NJ racing license and satisfy all regulatory requirements., • Must be able to pass background suitability investigation., • Must be able to pass initial drug screening.

Job DescriptionDescription: Summary. This position is responsible for (1) supporting the planning and execution of client projects such as rollouts, buildouts, and refreshes, (2) acting as a liaison between client and vendor partners to coordinate project activities, (3) learning to manage project scope, budgets, and timelines under the supervision of senior team members, and (4) developing the skills necessary to transition into a Project Manager role. This position requires professionalism, organizational skills, and the ability to collaborate across departments. Candidates local to our Paramus, NJ office are preferred but we will also consider excellent candidates from other states outside of this market. Job Responsibilities. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. • Identify when escalation is needed and involve senior leadership to ensure projects meet service expectations., • Participate in due diligence related to local municipalities and support expeditor communication as needed., • Support the evaluation and vetting of subcontractor proposals and bids., • Assist in the review and distribution of architectural drawings and project documentation., • Gain exposure to margin management and cost tracking for client accounts., • Identify opportunities for added value and report revenue growth potential to senior management., • Coordinate with and support Project Specialists to ensure task completion and project milestones are met., • Contribute to the development of project scopes and strategic plans based on client requirements., • Assist with key performance indicator (KPI) tracking and reporting for project deliverables., • Participate in site visits and walk-throughs to evaluate project progress and report findings to the senior team., • Serve as a key point of contact for daily client communications via phone, email, and virtual meetings., • Manage client budgets and project timelines, supporting senior staff in decision-making and issue resolution., • Support the planning and execution of client projects such as rollouts, buildouts, and refreshes under the guidance of Senior Project Managers and the Director of Projects. Proficiencies. • Strong organizational skills, • Attention to detail, • Adaptable and able to work in a fast-paced environment., • Demonstrates attention to detail and accuracy., • Possess excellent time management skills., • Problem resolution skills This position does have supervisory responsibility. Requirements: Education/Experience. A degree with 1+ years in construction related project administration or management or any equivalent combination of training and experience that provides the required knowledge, skills, and abilities is qualifying. To perform this job successfully, an individual should have basic skills in a work order management system, proficiency in MS Office skills, and the willingness to expand their knowledge of interior and exterior commercial construction. Work Environment/Physical & Visual Demands. • This position works a fluctuating schedule Monday to Friday; flexibility is required, • This position requires extensive contact with people and infrequent travel., • Physical Demands: Speaking, Listening, Writing, Sitting, Keystroke, Crouching, Kneeling, Reaching, Standing, Walking, Pushing, Pulling, Finger movement, Squatting, Grasping, Repetitive Motion, and Sedentary/ Light work, Climbing, requiring lifting up to 20lbs or up to 50lbs with assistance., • Visual Demands: Visual acuity to perform activities such as viewing a computer terminal and reading., • Environment Conditions: This position is subject to sufficient noise with an indoor environmental condition; protected from weather conditions, but not necessarily from temperature changes

Job DescriptionQuality Control Microbiology Engineer III Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Device, IT and Human Resources disciplines in New Jersey. The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experienceMust be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilitiesSupervisory Responsibility; Direct reportsWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels.Must have the ability to work in a team-oriented environment and with clients.Must be able to work during the weekend, holidays and as required by the company.Working EnvironmentWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen.Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy.Must have the ability to work in a team-oriented environment and with clientsMust be able to work during the weekend, holidays and as required by the companyMust be able to handle the standard/moderate noise of the manufacturing facility Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionWant to make a meaningful difference in peoples’ lives while earning a competitive salary? At Jushi Holdings Inc. ”) (CSE: JUSH) (OTCQX: JUSHF), we are shaping the future of the cannabis industry, the fastest growing jobs sector in the U.S. The Shift Supervisor will partner with the Dispensary Manager to lead the team. This role should lead by example by being the ultimate illustration of service, dedication, pace, and energy. The Shift Supervisor will also be primarily responsible for receiving deliveries, inputting inventory data, restocking product on the floor, and ensuring that all product remains in FIFO order. The Shift Supervisor should mentor, motivate, elevate, and inspire the team by keeping a positive and can-do attitude at all times.WHAT YOU WILL DO • Follow and uphold established policies for sales and customer service to ensure customer satisfaction, • Maintain in-depth knowledge of products and strains in the store, as well as industry-wide product knowledge and strive to train and share that knowledge with other members of the team, • Responsible for monitoring and maintaining inventory levels, ensuring an assortment of product, and communicating inventory action items with the Store Manager, • Assist Patient Care Specialists in the consultation of patients to ensure that the employee is empowered and informed on the right product choices by being knowledgeable about how different methods of cannabis consumption affect our patients differently, • Receive new deliveries in Inventory Room and ensure all manifests are accurate and compliant to map deliveries in MJ Freeway. Report any delivery discrepencies immediately to G/P & Inventory Manager to rectify., • Complete and appropriately delegate (if applicable) tasks assigned during a scheduled shift:, • Correct cash handling and discount application, • Verification of proper paperwork, documentation, and ID for patients, • Security measures and safety compliance, • Maintenance of an organized and clean store, • Support of open communication with the management team and other coworkers, • Reporting of team member issues or patient situations, • End of day daily update e-mails, • Opening and closing duties, • Work with the Management team to ensure retail store operations run smoothly, accurately, and in compliance with the applicable rules and regulations, including:, • Lead in the onboarding and training of new Patient Care Specialists in partnership with the Store Manager, • Able to complete all MOD cash and inventory functions for closing procedures, • Follow all Safety & Security procedures for opening and closingWHAT WE ARE LOOKING FOR, • High School diploma or General Education Development (GED) required, • Associate or Bachelor’s degree in any field preferred, • Experience or study emphasis in biology, medicine, horticulture, agriculture, business, management, or hospitality, • Minimum of 2 years combined dispensary, call center, retail, sales, hospitality, or customer service experience, • Excellent computer and technical skills, including experience with web browsers, retail POS systems, and credit card processing terminals., • High-level critical thinking, attention to detail, mathematical, language, and reasoning skills, • Must be comfortable adding, subtracting, multiplying and dividing fractions and decimals, and high-volume cash handlingPHYSICAL REQUIREMENTS, • Constantly perform desk-based computer tasks, • Frequently sitting and standing, • Occasionally stand/walk, reach/work above shoulders, grasp lightly/fine manipulation, grasp forcefully, use a telephone, sort/file paperwork or parts, lift/carry/push/pull objects that weigh up to 25 pounds, • Occasionally Twist/bend/stoop/squat, kneel/crawl, • Must be able to work a flexible schedule to include weekends and holidays, • Complete any needed assistance including oversight and coverage outside of, • the assigned region as required

Job Description Position Title: Executive Assistant Job Classification: Exempt Type of Position: Full-time Location: Williamstown, NJ Reports to: Senior Executive Vice President (SEVP) Requirements: 1–2 year(s) of experience in a similar role or internship supporting executives, finance, or analytics functions. Education: Currently enrolled in or has completed a Master of Business Administration (MBA) program, with an undergraduate degree in Business, Finance, Economics, or a quantitative-related field. Relevant certifications (e.g., Data Analytics, Project Management) are a plus. TRAVEL: Approximately 0-15% o 15-30% o 30-60% Salary Range: $55,000 - $75,000 Company Overview: A growing company with local roots, COPS Monitoring offers a competitive salary along with many great benefits such as Health Insurance, 401(K), Tuition Reimbursement, and great company events! The security industry is exciting, and the company offers opportunities for growth and advancement, all while maintaining a family atmosphere. Position Overview: The Executive Assistant provides direct support to the SEVP and plays a key role in ensuring the efficiency of executive operations. This role is ideal for a driven individual currently pursuing an MBA or holding a Bachelor’s degree in Business or a quantitative field who wants to gain hands-on experience working alongside senior leadership in a fast-paced, data-driven environment. Acting as a strategic partner to the SVP, this position involves financial analysis, project coordination, and operational insight, offering a unique opportunity to learn the inner workings of executive decision-making and leadership within one of the nation’s most respected monitoring companies. Key Competencies: • Analytical Mindset: Demonstrated ability to analyze financial data, prepare management notes, and distill complex information into actionable insights., • Adaptability: Open-minded, eager to learn, and comfortable “rolling up your sleeves” to assist with both high-level strategy and hands-on execution., • Initiative: A self-starter who can work independently, anticipate needs, and proactively identify solutions., • Professionalism: Strong communication, organizational, and time-management skills; able to handle confidential information with discretion., • Team-Oriented: Comfortable working across departments and engaging with multiple stakeholders while maintaining composure in a fast-moving environment., • Technical Proficiency: Skilled in Microsoft Office (especially Excel and PowerPoint); familiarity with data analytics tools is a plus. Key Responsibilities: • Serve as the primary support to the SEVP, attending meetings, taking detailed notes, and preparing concise follow-up reports., • Conduct financial and operational analyses to support executive decision-making., • Coordinate cross-departmental initiatives and ensure timely completion of deliverables., • Prepare management briefings, presentation decks, and strategic summaries for internal and external meetings., • Maintain awareness of key projects, timelines, and company initiatives to keep the SEVP informed., • Perform administrative duties including scheduling, correspondence, and document preparation with a high degree of accuracy., • Support the SEVP with ad-hoc research, data collection, and business analytics projects., • Uphold confidentiality and professionalism in all matters., • Work on-site daily at the Williamstown office and represent the SEVP in meetings when necessary. Physical demands, work environment, and attendance requirements: The physical demands, work environment, and attendance requirements characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Physical Demands: Minimal physical demands., • Work Environment: The noise level in the work environment is usually minimal., • Attendance requirements: This position is salaried exempt. We are proud to offer equal employment opportunities (EEO) to all regardless of race, gender, ethnicity, disability, or veteran status. We maintain a drug-free workplace. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life insurance, • Paid sick time, • Paid time off, • Tuition reimbursement In addition to applying online, all applicants should email their resume to:

Job DescriptionQuality Control Analytical Associate IIAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Device, IT & Human Resources disciplines in New Jersey. The Quality Control Analytical Associate II serves as a support role to clinical and commercial production. The QC Analytical Associate II will assist with process check point, stability, and release analytical testing to ensure that quality standards are upheld for all products produced at the facility. Under the direction of the Manager, QC Analytical Associate II, responsibilities include: • Performs the accurate execution of all company and/or client test methods and procedures of cellular products to ensure the safety and/or efficacy of different cell populations, • Performs maintenance, monitoring, and troubleshooting of pertinent equipment, • Performs and assists in the training of other Quality Control technicians, • Maintains training records and coordinates records retention with Document Control and Training groups, • Tests, documents, and reports results for products or materials following company and/or client procedures following CGMP and/or GTP guidelines, • Performs state proficiency testing and/or client proficiency testing under direct supervision as applicable, • Participates in managing QC materials and supplies, • Performs and assists in equipment and method qualification/validation activities as needed, • Performs reagent and media preparation, • Provides input based on level of knowledge and experience with troubleshooting malfunctioning equipment, • Investigates out-of-specification, out-of-trend, aberrant, and/or non-conforming test results, • Initiates, investigates, and prepares deviation reports with input from assigned supervisor, • Brainstorms and implements corrective and preventive actions, as and when applicable, • Documents training and execution of shipping test samples to contract laboratories for testing, • Completes all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP), • Communicates effectively with other co-workers, departments, management and clients, • Eventually serves as a lead and/or co-lead for client projects, • Additional tasks as assignedREQUIREMENTS, • BA/BS in a science or relevant field required, • Prior cGMP experience required, • Prior QC laboratory, clinical laboratory, microbiology, hematology, blood banking, or immunology experience in a CGMP/GTP environment preferred, • Prior industrial experience in cell count methodologies preferred, • Prior academic and/or industrial cell therapeutic experience preferred, • Minimum 2-5 years of experience in Quality Control laboratory setting or within the biopharmaceutical industry, • Proficient with computer software such as: Microsoft Office, Visio, • Strong written and oral communication skills, • Strong presentational skills preferred, • Candidate must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities.Other Information, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy. Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facility, • The QC Analytical Associate II must be able to work in a laboratory environment for an extended period., • Must be physically capable to stand; walk; sit; bend; stretch; use hands to finger, handle or feel; reach with hands and arms; and talk or hearPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. QC Analytical Associate I is available as well.

Job DescriptionEssential Duties and Responsibilities: • Station master of both the front and back of house, • Effectively train and mentor Crew Members, • Effectively manages the restaurant, including administration of policies and guidelines of the company, ensuring 100% customer satisfaction at all times, • Maintains fast, accurate service, positive guest relations, and ensuring products are consistent with company quality standards, • Ensures Occupational Safety & Health Act, local health and safety codes, and company safety and security policy are met, • Must maintain an “A” health inspection rating at all times, • Controls day-to-day operations by scheduling labor, ordering food and supplies, and developing the restaurant team, • Assists profit & loss, by following cash control/security procedures, maintaining inventory, managing labor, reviewing financial reports, and taking appropriate actions, • Manage Food and Labor Costs, keeping them to the level specified by management., • Conducts performance appraisals, takes disciplinary action, motivates and trains, • Ensures maintenance of equipment, facility, and grounds through the use of a preventative maintenance program, • Ensures food quality at all times, • Ensures a safe working and customer experience environment by facilitating safe work behaviors of the team, • Trains to gain the skills and experience necessary for promotion to General Manager, • Performs day-to-day responsibilities such as using cash register, operating the grill, taking customer orders, etc., as needed, • Other duties and responsibilities as assigned by your supervisor Qualifications - Knowledge, Skills and Abilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ● Education/Experience: Successful Candidates/Employees of this position must have a High School Diploma or GED. A college or university degree is preferred. In addition, 1-2 years of supervisory experience in either a food service or retail environment is required with responsibility for restaurant/store profit and loss. Experience in providing customer service and a desire to grow in the food industry is strongly preferred. You must have a very hands on management style and be actively involved in all daily functions of the store. • Certifications: A NYC Food Handlers License is required to be considered for this position., • Language Ability: Good communication and interpersonal skills are required. The successful candidate/employee will use communication skills to build an exceptional team, supervise others, give detailed instructions and training, and resolve conflicts. The ability to read and comprehend simple instructions, short correspondences, and memos is necessary. The position also requires the ability to write simple correspondences and the ability to effectively present information one-on-one, in small group situations and to other employees of the organization as well as customers. It also requires the ability to read, analyze, and interpret general business memos, including financial data. This position requires that you are able to proficiently speak, read, and write the English language, • Math Ability: The position requires the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. It also requires basic business math and accounting skills., • Reasoning Ability: The position requires the ability to solve practical problems and deal with a variety of situations and people. Strong analytical and decision-making skills are needed., • Computer Skills: Basic personal computer literacy is required, with proficiency in Word, Excel, PowerPoint, Internet, and other appropriate software. Must be able to operate cash register., • Supervisory Responsibilities: Supervises Shift Leaders and Crew Members. Requires strong skills and experience in management, delegation, training, creating a positive work environment, and taking disciplinary action, as needed., • Physical Demands: The position’s physical demands require work in a restaurant/kitchen environment with moderate to loud noise levels, varying temperature conditions and possible direct exposure to hazardous substances, such as hot oil. While performing the duties of the job, the employee is regularly required to sit, stand, travel and react quickly to deadlines, sometimes with little notice. The employee is often required to stand for long periods; walk, bend, kneel, and reach with hands boxes or food containers typically weighing 50 pounds or less, without restrictions. May be required to use stepladder. Finger dexterity is required for use of cash register. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Must be able to travel as needed., • Hospitality: Actively look for ways to help customers, provide as much information as requested. Infer possible customer needs, as it may be their first experience at the restaurant. Knowledge of, quality standards of service, store policies regarding customer interaction, assessment of customer needs and customer satisfaction are all necessary., • Active Listening: Give full attention to what customers are saying, be able to listen to and process the customers’ order without losing track., • Social Perceptiveness: Be aware of customers’ reactions, both verbal and nonverbal, and understand why they are reacting this way. Understand the boundaries of appropriateness., • Integrity-must be honest and possess an immense code of ethics as the cashier is the primary receiver in the cash flow.

Job DescriptionCompany Description Every minute of every day, Smiths Detection’s threat detection and security screening technology helps to protect people and infrastructure, making the world a safer place. Smiths Detection, part of Smiths Group is a global leader in the development, manufacture and management of security and detection solutions designed to make the world a safer place. Our technology provides threat detection and screening solutions for customers in our key markets: aviation, ports and borders, defence, and urban security. Our expertise spans 21 global offices, seven manufacturing sites and five R&D centres, with a global network of 3,000 dedicated colleagues contributing towards over 40 years at the frontline of advances in safety and security. This results in careers built on variety and the opportunity to work on a range of state-of-the-art solutions, where you can develop your knowledge and experience every day. Job Description This position requires daily travel to locations in and around the Newark area, including the airport. SPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIES INCLUDE BUT ARE NOT LIMITED TO: • Responsible for meeting daily service repair needs and driving customer satisfaction, • Installs, repairs and maintains equipment in the field; provides customer training as required., • Documents all inspections, maintenance, repair work and submits paperwork in a timely basis, • Order, install, and return parts and manages repair parts cycle time, • Reviews all logs for open issues and prepares formal reports to customers as necessary., • Participates in Service Sales opportunities and assists with promoting and implementing revenue programs., • Ensures that tools and test equipment are properly maintained and calibrated, • Assesses product/equipment performance based on field support data; recommends modifications or improvements., • Seeks to provide technical support to customers and other service professionals as required., • May participate in site surveys, pilot program service activities, attend meetings, • Possesses basic technical knowledge on the company’s Trace and X-Ray technologies., • Maintains clear and concise business communication, both oral and written, • Establishes and maintains a close relationship with senior level FSE’s and Product Managers in order to support the needs of the customer and remain aware of current technical trends., • Exercises every available measure to control and minimize costs., • Travel, overtime and work hours other than Monday-Friday may be required., • Comply with and ensure department compliance with Company health, safety and environmental policies., • Comply with all applicable U.S. export control and security regulations., • Other duties as required.Qualifications Education/Training: Associate’s Degree/Related Trade Certification (electrical, electronic, mechanical)/Military Training (electrical, mechanical, electronics). (Equivalence achieved through comparative work and life experience of 1-3 years is acceptable work experience in a related electrical or mechanical field service role). Computer literacy; competency in use of all programs within MS Office Suite and aptitude for learning specialized software programs. Experience: Minimum of 1-3 years experience directly involved in troubleshooting and field repair of electrical and electronic systems and equipment. Knowledge/Skills: Individuals shall possess excellent communications skills and have a strong orientation for customer focus and teamwork. Must be responsive to all customer issues at all times. Must be willing & able to travel at short notice. Supervises: While supervision is not considered a primary responsibility of this position, there may be instances where supervision of others on a project basis may be required Background: This position requires Sensitive Security Information (SSI) access and vetting via the TSA. Applicant must successfully pass a federal background investigation PHYSICAL/MENTAL REQUIREMENTS: • Possess excellent organizational, communication, interpersonal skills with the ability to multi task several projects at once., • Excellent customer service skills and the ability to handle stressful situations., • Self-motivated, reliable, and accountable individual, • Possess excellent telephone skills, • Must be able to lift/carry 80 lbs., • Must be able to push/pull 200 lbs., • Must be able to move/ manipulate equipment weighing up to 1000 lbs. with the assistance of carts, hoists, davit cranes, pallet jacks or other devices as defined in the manuals and Technical Advisory documentation., • Job requires frequent bending, stooping, twisting, turning, and working in unusual positions requiring full body mobility. Work environment is typically considered to be wherever the customer of concern is located. Service will typically be rendered at airports, correctional facilities, courthouses, cruise ships or other locations as required. This position may require Sensitive Security Information (SSI) access and vetting via the TSA. If required, applicant must successfully pass a federal background investigation. This position may require a U.S. Personal Security Clearance. SDI is a Federal Contractor and a drug-free workplace. By submitting an application, I confirm that I understand that the Company has a right to require me to submit to a drug test prior to employment and at any time during my employment, to the extent permitted by law. Smiths Detection is a global leader in detection and screening technologies for the protection of people and assets, supporting safety, security and freedom of movement in today’s world. Additional Information We offer… Join us and we’ll help build your career, with excellent training and opportunities for career growth across the business, both locally and globally. You’ll experience an inclusive environment, with strong leadership and a focus on safety and wellbeing. You’ll also have the flexibility to choose from a wide range of benefits to suit your lifestyle, offering you and your family support from a health and wellbeing, financial and lifestyle perspective. Join us and work for a world-leader, with the benefits and training to reward your dedication and skills. Be part of a team where we are making the world a safer place. HIRING SALARY RANGE: $49,280 - $99,600 per year. (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant and alignment with internal and market data.) This role offers a competitive Business Profit Plan. This position includes a competitive benefits package. For details, please visit the Reward & Benefits tab on our main careers page at . This position includes a competitive benefits package. For details, please visit the Reward & Benefits tab on our main careers page at . Smiths Detection is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity PostersIf you’d like to view a copy of the company’s affirmative action plan or policy statement, please email . If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail call toll-free 877-703-1029. This email and phone number is created exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only messages left for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. Smiths Detection, Inc. participates in the Electronic Employment Verification Program. #SDNA We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc) Company DescriptionSMITHS DETECTION – MAKING THE WORLD A SAFER PLACE Every minute of every day, in nearly every country across the globe, Smiths Detection employees and technology make the world a safer place. We safeguard people, business and critical infrastructure with the latest innovations and screening technology for aviation, ports & borders, defense, and urban security. We are always on the lookout for talented individuals to join our company and would love to hear from you. If you have not found a suitable opportunity on our careers page, we would like to ensure that we keep you up to date – please register your interest by submitting an application and we will be in touch as soon as a role matching your skill set arises. What makes us different: Safety Culture: the safety of our people is our first priority. We have an excellent track record in environmental health and safety, running regular trainings and providing all the necessary tools to enable our teams to perform their work with the utmost confidence.SMITHS DETECTION – MAKING THE WORLD A SAFER PLACE\r\nEvery minute of every day, in nearly every country across the globe, Smiths Detection employees and technology make the world a safer place. We safeguard people, business and critical infrastructure with the latest innovations and screening technology for aviation, ports & borders, defense, and urban security. We are always on the lookout for talented individuals to join our company and would love to hear from you. If you have not found a suitable opportunity on our careers page, we would like to ensure that we keep you up to date – please register your interest by submitting an application and we will be in touch as soon as a role matching your skill set arises.\r\n\r\nWhat makes us different:\r\n\r\nSafety Culture: the safety of our people is our first priority. We have an excellent track record in environmental health and safety, running regular trainings and providing all the necessary tools to enable our teams to perform their work with the utmost confidence.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. * Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. * Demonstrating a willingness to help others and be a team member * Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. * Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. * Provide voice of Customer feedback. * Through service and Customer relationships, build brand dedication. * Conduct travel and work in a safe manner, constantly learning new technology and soft skills. * Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. * Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: * Proficient verbal and written communication and Customer relation skills. * Able to interact and effectively communicate in person and over the phone with customer and co-workers. * Present a professional image. * Must be adaptable to changes and able to deal with change, delays, or general work-related issues. * Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. * Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). * Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. * Basic mechanical and logical solving skills are a must. * Rational decision making and problem-solving skills. Work Environment * Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: * Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: * We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary * Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance * 3+ Weeks’ Vacation to Start * 10 Company Paid Holidays * 401(k) retirement plan with company contribution Tuition reimbursement * Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Must be highly mobile, able to access all areas of the premises. * Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. * Ability to sit for prolonged period of times. * Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. * Ability to frequently use hands and arms. * Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. * Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: * Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. * Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. * Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. * Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1440B, Newark NJ

Job DescriptionGrow your career with a mission-driven leader At Morris Group, Inc.—a third-generation, family-owned Top Workplace—our purpose is to help manufacturers in the United States win on productivity. As a CNC Systems Field Support Specialist, you’ll be a trusted on-site expert who keeps mission-critical machine tools performing at their best. Why this role matters • Uptime is everything: you’ll install, commission, calibrate, maintain, troubleshoot, and repair CNC machines and accessories at customer sites., • Customers rely on your expertise for operator training, system networking, software setup, preventive maintenance, alignments, major component swaps, overhauls/refurbs, upgrades/retrofits, and machine un-installs., • Your insights travel: you provide a direct communication link to the Service Group of the Robert E. Morris Company and pass along voice-of-customer feedback to strengthen our brand loyalty., • You’ll document work and manage cases in Salesforce Lightning Customer Support. What you’ll bring, • Ability or willingness to learn to interpret mechanical drawings; electrical/pneumatic/hydraulic schematics; PLC ladder diagrams; and to use diagnostic test equipment to resolve issues across electrical, mechanical, electro-mechanical, and control systems., • Strong verbal and written communication with a polished, professional presence; confidence interacting with customers and colleagues by phone and in person., • Comfort with change and shifting priorities; steady under pressure., • PC literacy with MS Word, Excel, and Outlook., • Electro-mechanical aptitude (motors, drives, transformers). Experience in machine tool manufacturing/installation/operation/maintenance/repair or a broad shop background is a plus., • Logical troubleshooting, mechanical reasoning, and sound decision-making. Where you’ll work, • On the road daily from home to customer facilities within your territory, with occasional overnight hotel stays for remote jobs or training., • Typical environments include machining/manufacturing settings with exposure to noise, electricity, chemicals, heavy equipment, and other automated/manual machinery; you’ll also spend time in office and training environments at the Robert E. Morris Company. Tools & technologies you’ll service, • CNC Mill (3–4 axis VMC): Fanuc, Mazak, Haas, Okuma, Doosan, Makino, DMG Mori Seiki, • CNC Lathe (2–4 axis): Mazak, Haas, Okuma, Doosan, DMG Mori Seiki, • CNC Mill (5+ axis VMC): Fanuc, Mazak, Haas, Okuma, Kitamura, DMG Mori Seiki, • CNC Lathe (5+ axis): Mazak, Okuma, Doosan, DMG Mori Seiki, • PLCs: Fanuc, Allen-Bradley, Siemens, • Variable Frequency Drives (VFD) and servo motors Core proficiencies, • CNC Machine Repair, • Electrical Troubleshooting, • HVAC Service & Installation, • Troubleshooting CNC Machines Rewards & benefits, • Competitive starting pay, • Market-competitive health benefits, including a zero-premium medical option; vision, dental; company-paid life insurance, • 3+ weeks of vacation to start, • 10 paid company holidays, • 401(k) with company contribution; tuition reimbursement, • Employee appreciation events, perks, and an Employee Assistance Program Also important, • Perform related duties as required., • Responsibilities listed are illustrative and not exhaustive; similar work may be assigned. The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus.

Job Description We are seeking a reliable and detail-oriented Machine Operator to support production operations. The Machine Operator will be responsible for operating, monitoring, and maintaining production equipment to ensure quality, efficiency, and safety standards are met. Key Responsibilities • Operate production machinery according to established procedures and safety guidelines, • Set up machines for daily production runs, including adjustments and changeovers, • Monitor machine performance and product quality during operation, • Inspect finished products to ensure they meet company and customer specifications, • Troubleshoot minor mechanical issues and report major problems to maintenance or supervisors, • Perform routine cleaning and basic preventive maintenance on machines, • Accurately complete production logs, reports, and documentation, • Maintain a clean and safe work environment at all times, • Follow all company policies, OSHA regulations, and safety procedures Qualifications • Previous machine operation or manufacturing experience preferred, • Ability to read work orders, measurements, and basic technical instructions, • Mechanical aptitude and attention to detail, • Ability to stand for extended periods and lift up to 50 lbs, • Strong teamwork, reliability, and time-management skills Work Environment • Manufacturing/warehouse setting, • Exposure to moving machinery, noise, and production equipment, • Use of required personal protective equipment (PPE) Schedules 1st Shift: 7am to 3:30pm 2nd Shift: 3pm to 11:30pm Work hours varies based on the season. Company DescriptionMany of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. A personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees! Stop in today - and feel free to bring a friend along!Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. \r\n\r\nA personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees!\r\n\r\nStop in today - and feel free to bring a friend along!

Job Description Job Summary: Performs dimensional, mechanical, electrical, and visual inspection of parts, assemblies and final product. Reviews process documentation for conformance to order specifications. Uses various measuring devices to ensure compliance with specifications. Maintains calibration of company devices. Primary Responsibilities: • Uses engineering drawings to determine quality and reliability standards., • Prepares and documents non-conformance reports., • Utilizes required inspection records., • Prepares and maintains required inspections records., • Performs final, in-process and receiving inspection., • Reports variations in material inspected and equipment calibration., • Adheres to safety practices and procedures., • Follows procedures as defined by CAD policies, procedures, and AS9100 requirements. Maintains confidentiality of all information processed., • Maintains calibration records of inspection devices. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to talk or hear. The employee is occasionally required to stand, walk; use hand to finger, handle, or feel; and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds using appropriate moving devices. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. Work Environment: The employee is occasionally exposed to hazardous materials. The noise level in the work environment is usually low. The work environment is organized and controlled. Essential Skills Subject Matter Understanding. Analytical. Inspecting/Examining. Troubleshooting. Job Qualifications: Required: High School Diploma or a General Educational Development Diploma (GED). Ability to read instructions, work orders and blueprints. Good Computer Skills. Previous inspection experience. Must pass the ATF Background check. Preferred: Three years plus of previous inspection experience in a manufacturing environment. Performs related duties as assigned. Regular and consistent attendance is required. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.