Prime jobs in Cherry Hill, New JerseyCreate job alerts

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jenny or Text "Philly MS3" to 904-541-8573 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:25 PM) Requisition ID 2025-192014 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Chelsey or Text "Philly MS2" to 904-932-0143 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $38.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply) Tuesday-Saturday, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • One (1) year or more federal PM certification requirements through any combination of classroom training or work experience totaling 1 year, • One (1) year or more mechanical experience working offsite at customer locations preferred, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practicesEntrepreneurial spirit, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with non-contractual Ryder customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss any repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc.; Identify Freon and oil leaks., • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified., • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes., • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions., • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check., • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation., • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems., • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables., • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights., • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers., • Driveline: Lubricate drive line; Inspect components for wear or damage., • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks., • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition., • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal., • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc., • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism., • Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:10 PM) Requisition ID 2025-191924 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001312 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel and Auto Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jenny or Text "Philly MS3" to 904-541-8573 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply) Tuesday-Saturday, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:23 PM) Requisition ID 2025-192013 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call William or Text "Philly MS2" to 904-541-8565 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $38.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • One (1) year or more federal PM certification requirements through any combination of classroom training or work experience totaling 1 year, • One (1) year or more mechanical experience working offsite at customer locations preferred, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practicesEntrepreneurial spirit, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with non-contractual Ryder customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss any repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc.; Identify Freon and oil leaks., • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified., • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes., • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions., • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check., • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation., • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems., • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables., • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights., • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers., • Driveline: Lubricate drive line; Inspect components for wear or damage., • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks., • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition., • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal., • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc., • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism., • Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:05 PM) Requisition ID 2025-191921 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001312 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Pennsauken, NJ For More Info Call Jason or Text "Pennsauken" to 830-383-4767 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $43.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call Jason or Text "Pennsauken" to 830-383-4767 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 1 month ago (10/21/2025 8:52 AM) Requisition ID 2025-190127 Location (Posting Location) : State/Province NJ Location (Posting Location) : City PENNSAUKEN Location (Posting Location) : Postal Code 08110 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 month ago (10/29/2025 3:15 PM) Requisition ID 2025-190626 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $43.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 11 hours ago (12/3/2025 8:52 AM) Requisition ID 2025-192310 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 11 hours ago (12/3/2025 8:54 AM) Requisition ID 2025-192311 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Prime Staffing is seeking a travel CT Technologist for a travel job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 12/29/2025, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Prime Staffing is seeking a travel nurse RN Electrophysiology Lab for a travel nursing job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: Electrophysiology Lab, • Discipline: RN, • Start Date: 01/05/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel About the Position \n Specialty: Registered Nurse – Electrophysiology (EP Lab) Experience: Minimum 2 years of recent EP lab or cardiac cath lab experience required License: Active State or Compact RN License Certifications: BLS and ACLS required – include expiration dates Must-Have: All time-off requests must be submitted with the initial application \n Description: Seeking an experienced EP Lab RN to assist in electrophysiology procedures, including pacemaker and ICD insertions, ablations, and tilt table testing. Responsibilities include monitoring patients, administering medications, circulating during procedures, and assisting with conscious sedation. \n This role includes 10–12-hour shifts, with on-call, weekend, and holiday rotations as needed. Compliance may take 4–6 weeks. A voice and nurse manager interview are required. Shift make-ups may be necessary per departmental needs. \n Requirements \n Required for Onboarding: \n\n • Active RN License\n, • BLS\n We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Prime Time Healthcare Nursing is seeking a travel nurse RN OR - Operating Room for a travel nursing job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: OR - Operating Room, • Discipline: RN, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel Benefits • 401k retirement plan, • Health savings account, • Referral bonus, • Medical benefits, • Dental benefits, • Vision benefits

Prime Staffing is seeking a travel MRI Technologist for a travel job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: MRI Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, • Employment Type: Travel About the Position Specialty: MRI Technician Experience: Minimum 1 year of recent MRI experience preferred License: ARRT Certification (MR) Certifications: BLS – AHA required Must-Have: Proficiency in operating MRI scanners, understanding of safety protocols, ability to work with contrast agents, and patient care experience \n Description: The MRI Tech performs magnetic resonance imaging procedures to produce high-quality diagnostic images. Responsible for preparing patients, ensuring safety compliance, operating MRI equipment, and working closely with radiologists and physicians. \n Requirements Required for Onboarding \n\n • ARRT (MR) Certification\n We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Prime Staffing is seeking a travel nurse RN Outpatient Surgery for a travel nursing job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: Outpatient Surgery, • Discipline: RN, • Start Date: 01/12/2026, • Duration: 12 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel About the Position \n Specialty: Registered Nurse – Medical/Surgical (Med/Surg) Experience: Minimum 2 years of recent Med/Surg experience required License: Active state or Compact RN License Certifications: BLS – must include expiration date Must-Have: All time-off requests must be submitted with the initial application \n Description: We are seeking a dedicated Med/Surg RN to care for adult patients recovering from surgery, illness, or injury. Responsibilities include assessing patient conditions, administering medications, documenting care, and working closely with interdisciplinary teams to support recovery and discharge planning. \n This is a 12-hour shift position with weekend, holiday, and occasional floating requirements. Onboarding and compliance processes typically take 4–6 weeks to complete. \n Requirements \n Required for Onboarding: \n\n • Active RN License (NC or Compact)\n We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

GHR Healthcare - PH Division is seeking a travel EMG Technologist for a travel job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: EMG Technologist, • Discipline: Allied Health Professional, • Start Date: 12/15/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours Advance your healthcare career as an Electromyography (EMG) Technologist in a leading hospital setting in Philadelphia, PA 19107. Join our expert neurodiagnostic team and play a key role in delivering high-quality patient care in one of Pennsylvania’s top healthcare environments. This EMG Technologist job offers a vibrant urban work experience in a city renowned for its medical excellence, rich history, and diverse culture. \n\nEMG Technologist Job Details\n\n\n\t • Location: Philadelphia, PA 19107 – Prime location for Pennsylvania healthcare jobs with access to public transportation, dining, and cultural attractions.\n\t, • Employment Type: Local, On-Site\n\t, • Hours per Week: 40\n\t, • Duration: 8 weeks (potential for extension)\n\t, • Start Date: December 15, 2025\n\t, • Pay Rate: $33.75/hour\n\t, • Estimated Weekly Salary Range: $1625/week\n\n\nEMG Technologist Qualifications\n\n\n\t, • Minimum 1 year of experience as an EMG Technologist, Neurodiagnostic Technologist, or related clinical support role\n\t, • Demonstrated ability to collaborate with physicians, healthcare administrators, and multidisciplinary staff\n\t, • Strong technical troubleshooting and problem-solving skills in a hospital environment\n\t, • Excellent verbal and written communication skills\n\t, • Proficiency with MS Office (Excel, Word) and electronic health records (EHR)\n\t, • Comprehensive knowledge of anatomy, patient history, and EMG procedures\n\n\nEMG Technologist Responsibilities\n\n\n\t, • Perform nerve conduction studies and assist physicians with needle EMG examinations in both laboratory and bedside settings\n\t, • Assemble, disassemble, and maintain EMG equipment for each patient case, ensuring optimal function and cleanliness\n\t, • Demonstrate expertise in electrode placement and operation of neurodiagnostic equipment\n\t, • Record, interpret, and differentiate between normal and abnormal responses during EMG testing\n\t, • Accurately enter data into electronic health records and support hospital billing processes\n\t, • Compile monthly statistics and contribute to departmental reporting and quality improvement\n\t professionals and the facilities that need them nationwide. We're committed to uncovering your ideal fit, supported by GHR's dedication to competitive compensation, transparent communication, and a devoted team that genuinely cares about your career journey. You can trust us to stand by your side as your advocate, confidante, and partner in advancing your career. At GHR, care and consideration are at the heart of everything we do. Visit ghrhealthcare.com to learn more.

Prime Time Healthcare is seeking a travel Pediatric Echocardiography for a travel job in Philadelphia, Pennsylvania. Job Description & Requirements • Specialty: Pediatric Echocardiography, • Discipline: Allied Health Professional, • Start Date: 12/15/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days Benefits • 401k retirement plan, • Health savings account, • Referral bonus, • Medical benefits, • Dental benefits, • Vision benefits

Join Our CRNA Team in Philadelphia! Are you a skilled Nurse Anesthetist or SRNA seeking an exciting opportunity in the vibrant city of Philadelphia? Look no further! We're thrilled to announce an opening at one of Philadelphia's most esteemed hospitals for a passionate CRNA like yourself. Why Choose Us? Â Â Flexible Shifts: Tailor your schedule with shifts ranging from 8 to 24 hours. Need more hours? Extra shifts are available with premium pay! Â Â Cutting-Edge Facilities: Experience the latest in OR technology with state-of-the-art equipment, ensuring you can provide top-notch care in a modern level 1 trauma medical center environment. Â Â Competitive Compensation: Your expertise deserves the best, with starting salaries for new grads exceeding 200K. CRNAs with 5+ years of experience enjoy a base salary of 245,000 and there are lucrative overtime opportunities. Â Â 75K Sign-On Bonus: We value your commitment to excellence. Receive a generous sign-on bonus as a warm welcome to our team. Â Â Work-Life Balance: Whether you prefer city living or suburban tranquility, our flexible scheduling allows you to choose the lifestyle that suits you best. Why Philadelphia? Â Â Thriving Culture: Immerse yourself in a city bursting with a diverse food scene, world-class entertainment, and top-tier sports events. Â Â Prime Location: Enjoy easy access to the coast, bustling NYC, and other mid-Atlantic cities, making weekend getaways a breeze. Â Â Welcoming Environment: New graduates are encouraged to apply! Kickstart your career in a supportive and dynamic healthcare community. Don't miss out on this incredible opportunity to advance your career in one of the nation's premier cities. Apply today and embark on a fulfilling journey with us! New graduates are warmly welcomed.

Join Our Anesthesia Team in Philadelphia, Pennsylvania! Roxborough Memorial Hospital, a 131-bed community hospital and a proud member of the Prime Healthcare system, is seeking a Certified Registered Nurse Anesthetist (CRNA) to join our team in Philadelphia, PA. This is an outstanding opportunity with options for full-time, part-time, or per-diem schedules in a collegial and supportive environment. Position Highlights * Employment: Hospital-based anesthesia team, in collaboration with anesthesiologists and CRNAs * Practice Scope: General surgery, plastics, urology, and gynecology * No neurosurgery, obstetrics, or pediatrics * Primary site with rotation to 3 suburban locations * Schedule: Full-time, part-time, or per-diem options available * Call: 2nd call only with limited call backs * Independence required; must be comfortable working solo when needed Responsibilities * Provide safe, high-quality anesthesia care before, during, and after surgery * Perform pre-anesthesia assessments and develop individualized care plans * Obtain informed consent for anesthesia procedures * Administer anesthetic medications and monitor patient response * Manage airway, anesthetic depth, and emergence * Conduct postoperative evaluations * Educate patients on anesthesia options and surgical preparation * Participate in training and education within the anesthesia department Compensation & Benefits * Competitive compensation package * Health insurance: Self-funded EPO (HMO) plan at no cost to provider * Retirement plan: 401(k) * CME allowance * Relocation reimbursement * Malpractice insurance coverage About Roxborough Memorial Hospital Roxborough Memorial Hospital has been serving the communities of Roxborough, Manayunk, East Falls, and Northwest Philadelphia for more than a century, first opening its doors in 1890. The hospital includes a School of Nursing founded in 1898, continuing a strong tradition of education. Accredited by the Joint Commission, Roxborough provides a wide range of medical and surgical services in a patient-centered environment. About Prime Healthcare Founded in 2001 by Dr. Prem Reddy, Prime Healthcare has emerged as one of the largest physician-led health systems in the United States. Our company includes 51 hospitals and more than 360 outpatient locations across 14 states. 18 hospitals are members of the Prime Healthcare Foundation, a 501(c)(3) public charity. Prime Healthcare is proud to be named one of "America's Greatest Workplace" for 2024 by Newsweek and has been recognized among the nation's top health systems by Truven Health Analytics and is the only health system to receive the prestigious John M. Eisenberg Patient Safety and Quality Award in 2021 for addressing social determinants of health. We stand apart from others by our unique ability to save and transform hospitals. Living in Philadelphia, PA Step into the heart of American history and stay for the vibrant food, art, and culture. Philadelphia offers the perfect mix of historic charm and modern innovation, with thriving neighborhoods, world-class museums, and endless dining options.

Join Our CRNA Team in Philadelphia! Are you a skilled Nurse Anesthetist or SRNA seeking an exciting opportunity in the vibrant city of Philadelphia? Look no further! We're thrilled to announce an opening at one of Philadelphia's most esteemed hospitals for a passionate CRNA like yourself. Why Choose Us? Â Â Flexible Shifts: Tailor your schedule with shifts ranging from 8 to 24 hours. Need more hours? Extra shifts are available with premium pay! Â Â Cutting-Edge Facilities: Experience the latest in OR technology with state-of-the-art equipment, ensuring you can provide top-notch care in a modern level 1 trauma medical center environment. Â Â Competitive Compensation: Your expertise deserves the best, with starting salaries for new grads exceeding $200K. CRNAs with 5+ years of experience enjoy a base salary of $245,000 and there are lucrative overtime opportunities. Â Â $75K Sign-On Bonus: We value your commitment to excellence. Receive a generous sign-on bonus as a warm welcome to our team. Â Â Work-Life Balance: Whether you prefer city living or suburban tranquility, our flexible scheduling allows you to choose the lifestyle that suits you best. Why Philadelphia? Â Â Thriving Culture: Immerse yourself in a city bursting with a diverse food scene, world-class entertainment, and top-tier sports events. Â Â Prime Location: Enjoy easy access to the coast, bustling NYC, and other mid-Atlantic cities, making weekend getaways a breeze. Â Â Welcoming Environment: New graduates are encouraged to apply! Kickstart your career in a supportive and dynamic healthcare community. Don't miss out on this incredible opportunity to advance your career in one of the nation's premier cities. Apply today and embark on a fulfilling journey with us! New graduates are warmly welcomed.

Meat and seafood programs unmatched in quality jibe with highly personalized touches, like the curated selection of steak knives presented to diners prior to their entrees.

Overview Join an award-winning team of dedicated professionals committed to our core values of quality, compassion and community! Roxborough Memorial Hospital, a member of Prime Healthcare, offers incredible opportunities to expand your horizons and be part of a community dedicated to making a diff

Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Prime Staffing is seeking a travel Physical Therapist for a travel job in Voorhees, New Jersey. Prime Staffing Job ID #31298042

STARR Restaurants, Barclay Prime.A smart revamp of the conventional steakhouse, the menu is built around subtle twists that never skimp on luxury.Meat and seafood programs unmatched in quality jibe with highly personalized touches, like the curated selection of steak knives presented to diners prior

Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Prime Staffing is seeking a travel Physical Therapist for a travel job in Voorhees, New Jersey. Prime Staffing Job ID #31298043

Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Prime Staffing is seeking a travel Physical Therapist for a travel job in Voorhees, New Jersey. Prime Staffing Job ID #31353210

Job Description Job Title: Electrical/Electronic Engineer II/III Location- Philadelphia, PA Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier provider of engineering and industrial services, proudly supporting the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other Department of Defense (DoD) organizations. We are committed to fostering a collaborative culture where every employee's voice is valued, and opportunities for growth and development abound. At Continental Tide, you'll thrive in a fast-paced, dynamic environment that encourages innovation, skill-building, and the pursuit of excellence. Join our team of dedicated experts who are passionate about delivering cutting-edge solutions to support our nation's fleet. We look forward to welcoming you aboard! Job Description: We are seeking a skilled Electrical/Computer Engineer to support critical ship system processes, design, and development for naval and maritime operations. This role involves providing technical expertise, conducting system assessments, and contributing to the design and testing of advanced electrical and electronic systems aboard Navy vessels. Key Responsibilities: \n • Provide support for process control equipment related to ship systems.\n, • Perform electric valve actuator assessments, training, and technical assistance for ship personnel during repair and testing.\n, • Participate in the design, development, or modification of new and existing Systems Engineering Processes (SEP) and Capability Maturity Model Integration (CMMI).\n, • Review of technical documentation related to all variants of fielded systems and future fielded systems. \n, • Provide design support for integration of equipment in an industrial/shipboard environment.\n, • Collaborate on solutions to enhance system performance and reliability.\n, • Provide software and hardware installation support.\n, • Troubleshoot complex problems of all systems. \n, • Support auxiliary systems including fuel and lube oil systems, pumps, heat exchangers, smart valves, life support and compressed air systems. \n, • Apply expertise in Human Machine Interface (HMI) and Programmable Logic Controller (PLC) applications to improve shipboard operations.\n\n Experience and Skills Qualifications: • B.S. Degree in Electrical or Computer Engineering from an accredited college or university.\n, • Minimum of 4 years of professional experience in electrical engineering. \n, • Minimum of 3 years of experience working with HMI and PLC applications. \n, • Extensive experience with auxiliary fluid support systems and a strong understanding of Navy programs, organizations, and functions.\n Skills and Attributes: \n • Strong analytical and problem-solving abilities.\n, • Knowledge of fundamental concepts, practices, and procedures with industrial control systems.\n, • Proficiency in reading electrical diagrams.\n, • Knowledge of network troubleshooting tools.\n, • Proficiency in the use of testing and diagnostic tools associated with industrial control systems.\n, • Proficiency in designing, modeling, and testing advanced systems.\n, • Excellent communication and technical documentation skills.\n, • Knowledge of naval systems and shipboard operations.\n\n This is an exciting opportunity to work on cutting-edge projects that enhance the operational readiness of Navy vessels. If you're a motivated engineer ready to contribute to mission-critical solutions, we encourage you to apply today. Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Benefits: Learn more about us: See all of our latest opportunities at or follow us on our LinkedIn page at:. To be considered you must apply by going to . Continental Tide is an Equal Opportunity Employer - minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity. Continental Tide participates in E-Verify and U.S. citizenship is required for most positions. "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Join an award-winning team of dedicated professionals committed to our core values of quality, compassion and community! Roxborough Memorial Hospital, a member of Prime Healthcare, offers incredible opportunities to expand your horizons and be part of a community dedicated to making a difference. $10,000.00 hiring bonus with 2-year commitment Roxborough Memorial Hospital is a 131-bed community hospital. The hospital has been serving the medical and health care needs of the Roxborough, Manayunk, East Falls and northwest section of Philadelphia communities for more than a century, having first opened its doors in 1890. Roxborough Memorial Hospitals School of Nursing has been educating nurses since 1898. The hospital is accredited by the Joint Commission on the Accreditation of Healthcare Organizations, the nation's oldest and largest hospital accreditation agency. LSW or LCSW preferred. To provide emotional support, crisis intervention and counseling for Pediatrics, Adolescents, Adults, Older Adults and their significant others to cope with a multiplicity of social and emotional problems; information and referral; referrals for financial assistance and supportive services to patients and families with problems that are related to hospitalization, illness, disability or trauma. To provide case management & milieu management, complete psychosocial assessments, assist in the development and re-evaluation of Treatment Plans and work as a member of a multidisciplinary team, and to coordinate discharge planning. Complete necessary documentation and maintain clinical record for each client during his/her length of stay. Education and Work Experience • Required qualifications:, • Master's Degree in Social Work related field OR., • Master's Degree in Marriage and Family Therapy or related field., • In states without required licensure, then current registration with State Board is required within 3 months of hire.? In states with required licensure, license required at time of hire and must be maintained., • Behavioral Violence Prevention Training within 3 months of hire and maintain current., • Minimum one (1) year hospital or Outpatient experience with emphasis in mental health care., • Current BCLS (AHA) certificate upon hire and maintain current preferred. Company is an equal employment opportunity employer. Company prohibits discrimination against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (subject to applicable law), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Know Your Rights:

Overview Join an award-winning team of dedicated professionals committed to our core values of quality, compassion and community! Roxborough Memorial Hospital, a member of Prime Healthcare, offers incredible opportunities to expand your horizons and be part of a community dedicated to making a difference. Roxborough Memorial Hospital is a 131-bed community hospital. The hospital has been serving the medical and health care needs of the Roxborough, Manayunk, East Falls and northwest section of Philadelphia communities for more than a century, having first opened its doors in 1890. Roxborough Memorial Hospitals School of Nursing has been educating nurses since 1898. The hospital is accredited by the Joint Commission on the Accreditation of Healthcare Organizations, the nation's oldest and largest hospital accreditation agency. Responsibilities The CT Technologist works collaboratively within a multi-disciplinary team and is responsible for providing quality images. The CT Technologist works in support of the Radiologist, providing assistance in the performance of diagnostic and therapeutic procedures. Responsible for processing and transmission of images to PACS. Qualifications Education and Work Experience 1. One year of acute, clinical radiology experience is preferred., 2. Knowledge of mobile and stationary Radiographic / Fluoroscopic equipment is required., 3. Extensive knowledge of anatomy and medical terminology is required., 4. Radiology/ CT license and fluoroscopy permit as required by State., 5. ARRT-CT Certification is required, 6. Must possess and maintain BCLS (AHA) upon hire., 7. Proficient computer skills. Equal Employment Opportunity Company is an equal employment opportunity employer. Company prohibits discrimination against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (subject to applicable law), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Know Your Rights:

Job Description Job Title: Engineer (Mechanical/Electrical/Computer) Location: Philadelphia, PA Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier provider of engineering and industrial services, proudly supporting the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other Department of Defense (DoD) organizations. We are committed to fostering a collaborative culture where every employee's voice is valued, and opportunities for growth and development abound. At Continental Tide, you'll thrive in a fast-paced, dynamic environment that encourages innovation, skill-building, and the pursuit of excellence. Join our team of dedicated experts who are passionate about delivering cutting-edge solutions to support our nation's fleet. We look forward to welcoming you aboard! Job Description: We are seeking a highly skilled Engineer with expertise in mechanical, electrical, or computer systems to support critical tasks for naval and maritime operations. This role involves conducting detailed technical reviews, project management, and engineering support to ensure the accuracy, functionality, and quality of ship systems and installations. Key Responsibilities: \n • Provide engineering support for Air Conditioning and Refrigeration (AC&R), Steam, Auxiliary, Combat Support, Life Support and Ventilation, and/or Compressed Air Systems.\n, • Provide programmatic, engineering/technical support, test procedure development, testing, and onsite coordination support for programs, including Machine Alterations (MACHALTs), engineering change proposals. and/or ship change documents (SCDs).\n, • Provide market research, engineering support, and recommendations to resolve obsolescence issues.\n, • Provide Ship system configuration, testing, training, support, troubleshooting, and assessments of HM&E systems.\n, • Conduct pre- and post-installation ship checks to verify installation drawing accuracy.\n, • Support Integrated Logistics Support (ILS) development, certification packages for MACHALTs, and/or SCDs.\n, • Develop and track Plan of Action, and Milestones (POAMs) for related programs and projects.\n, • Provide strategic planning and analysis of requirements to assist in developing a fully Integrated Master Schedule (IMS).\n, • Actively participate in the NSWCPD System Engineering Program (SEP), which includes attending meetings; completing action items; participating on sub teams, and participating in training, and assessments. Provide support for Systems Engineering Plan tools and processes.\n, • Ensure proper equipment and logistic configurations for technical accuracy.\n, • Perform Technical Assessment Team (TAT) reviews to ensure the delivery of quality products to the Fleet. \n, • Develop and present fully automated advanced fluid system models using industry-standard software. \n, • Analyze the impacts of potential ship alterations or modifications to existing shipboard systems.\n\n Experience and Skills Requirements: \n • Bachelor's degree in any engineering discipline from an accredited college or university.\n, • Seven (7) years of experience in: Navy Ship Auxiliary systems, including distributed machinery\n, • control systems and software; Auxiliary Fuel, and Lube Oil systems; Auxiliary Pumps, and Smart Valves; Auxiliary Machinery, and the testing of these systems.\n, • Knowledge of NSWCPD System Engineering Program (SEP), Alterations (MACHALTs), engineering change proposals, and/or ship change documents (SCDs) processes.\n, • Experience with Integrated Logistics Support (ILS) development and obsolescence management.\n, • Proficiency in interpreting technical drawings and schematics.\n, • Experience in project management, engineering support, and system configuration.\n, • Knowledge and experience with naval ship systems including fuel and lube oil, pumps, heat exchangers, smart valves, auxiliary machinery and the testing of these systems.\n, • Must have the ability to obtain a SECRET clearance.\n Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Benefits: Learn more about us: See all of our latest opportunities at or follow us on our LinkedIn page at:. To be considered you must apply by going to . Continental Tide is an Equal Opportunity Employer - minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity. Continental Tide participates in E-Verify and U.S. citizenship is required for most positions. "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

'Are You a Certified Patient Care Tech? Are You Passionate About Teaching our Youth The Skills Necessary to Thrive and Save Lives in the Patient Care Tech Field? Apply to Our Open Patient Care Tech Instructor Position Today!' The Patient Care Tech Instructor is responsible for providing students with industry recognized instruction and training in the Career Technical Training Center leading to full-time jobs, higher education or advanced training.. Other Responsibilities/ Duties Include o Follows all integrity guidelines and procedures and ensures no manipulation of student data. o Ensures Center meets or exceeds DOL/Company performance goals. o Responsible to provide students with training leading to Career Technical Training completion and industry-recognized certifications. Provides students with comprehensive and individualized case management that ensures student progress, achievement and completion of the Job Corps program. o Provides quality career technical training that leads to student placement. Provides students with job leads and monitors placement of all graduates. o Ensures classroom is well organized and conducive to student learning. Holds students accountable for following Center's dress code/behavioral standards of conduct. o Produces quality work/assignments in a thorough, timely and accurate manner. o Maintains appropriate personal attendance, accountability and work productivity standards. o Plans, prioritizes and organizes assignments to meet established goals and deadlines. o Understands and applies job knowledge to effectively complete all required job responsibilities. Proactively maintains the skills required to perform job duties. o Mentors, monitors and models the Career Success Standards as required by the PRH. o Provides high-quality supervision and management for the student population. Takes swift and appropriate action and positively influences student behavior. Shows respect and courtesy to students and holds them accountable for their actions and behavior. o Provides quality programs and services for students and ensures that quality is maintained and student needs are met. Pursues improvement and enhancement of programs and services. o Exchanges ideas and information, both orally and in writing, in a clear and concise manner and contributes meaningfully to group efforts by offering relevant ideas and knowledge. Provides quality and timely information to DOL/Company when requested. o Effectively articulates thoughts and ideas. Identifies problems, analyzes causes and evaluates appropriate solutions prior to taking or recommending actions. Follows up to ensure prompt/appropriate action is taken and that problems are in fact corrected. o Works in partnership with staff from all Departments to ensure effective supervision and services are provided to students. o Accepts direction and supervision from the Center Director/Center Duty Officer/Shift Manager to include assignments to temporarily perform job responsibilities of other departments and positions. o Other duties as assigned. Qualifications • A minimum of one-year experience in teaching or related field required., • Certified, licensed, or accredited in the state in which the center is located, or is accredited by a professional trade organization. For NTC, instructor must be certified by union or trade organization, or by a national trade certifying organization., • Previous Job Corps experience preferred., • Must possess a valid Driver’s License and meet company insurability requirements.

What Makes This Job Highly Desirable: * Stay Active: Delivering an average of 140-180 stops per day, you'll effortlessly incorporate exercise into your daily routine. * Independence: Working solo at your own pace, you'll be the CEO of your route, making good business decisions. * Attractive Benefits: Our full-time delivery drivers enjoy paid time off and comprehensive health insurance coverage. * Customer First Customer Service: As the face our customers eagerly await, you'll be essential in delivering crucial medicines, supplies, gifts, and more. * Thriving Work Culture: Be a part of our positive, fun, and team-oriented environment. * Professional growth: Career growth opportunities for successful drivers such as moving into Lead Driver, Dispatcher, or Operations Manager roles, DOT certification, and professional development and training. What We Expect from Our Delivery Drivers: * Punctuality and Reliability: Cover your assigned shift and arrive on time, ready to work. * Attention to Detail: Ensure timely and accurate handling and delivery of Amazon Prime packages. * Use handheld devices for routing information and customer delivery information. * Prioritize Safety: Drive safely, conduct vehicle safety inspections, and adhere to local and state driving laws and company policies. * Outstanding Customer Service: Deliver exceptional service to our customers, making each delivery a satisfying experience. * Staying Active: Maintain pace in a physically demanding job, work in all weather conditions, lift packages up to 50 lbs., and frequently enter and exit the van at various locations. * Effective Communication: Use a smartphone for GPS navigation, package scanning, administrative tasks (e.g., clocking in/out), and communication with supervisors and team members. * Teamwork and Support: Assist with daily team requirements, including responding to rescue calls when fellow drivers need help with their routes. * BE SAFE and HAVE FUN Excellent Benefits & Flexible Scheduling for Delivery Drivers: * $23.25 - $25.00/hour (PAID WEEKLY) * 10-hour shifts are typical * Flexible 4-day work week (40 hours) is typical. * Shifts: Morning, afternoon, weekday and/or weekend * A minimum of 2 paid 15-minute breaks during your shift and 1 unpaid 30-minute meal break. * Opportunity for performance incentives and weekly safety bonuses * Medical Benefits Available (Full-Time Employees only) * Paid time off begins accruing immediately at the start of employment. Company Description Outlaw Logistics LLC, a proud Delivery Service Provider based in Philadelphia, PA, excels in delivering smiles to Amazon customers throughout the Philadelphia area. Our exceptional Delivery Driver team is the driving force behind our ongoing success! If you're seeking an employer that values respect, offers flexible hours, and encourages career growth and development, Outlaw Logistics is the perfect choice for you. We take pride in our employee retention and foster a work environment that inspires loyalty and stability. As a Driver, you'll have the opportunity to collaborate with a team that consistently improves, delivers top-notch customer service, and makes a positive impact on their communities. We are on the lookout for dependable, self-motivated, flexible, and hardworking drivers who thrive in a fast-paced environment! If you have prior experience as a Delivery Driver, Door Dash Driver, military personnel, Uber/Lyft Driver, Amazon Flex Driver, or in outdoor-based jobs such as Construction or Landscaping, you are an ideal candidate for this position! Join our team today and make a difference in the world of delivery! Company Vehicle Provided! No CDL required! Qualifications Delivery Driver Requirements: * Drivers must be at least 21 years old. * Drivers must be authorized to work in the United States * Drivers must pass a 4-Panel Drug Screening (We do not test for marijuana) * Drivers must have a good motor vehicle report. * Must have a valid driver's license within the state of employment. * Be able to lift 50+ pounds Additional Information Equipment Provided: • Delivery Vehicle & Gas, • Handheld Technology, • Uniforms, • Other safety and administrative gear necessary for job accomplishment

ABOUT US The Major Bridges P3 Initiative is part of the PennDOT Pathways Program, which is designed to bolster PennDOT’s ongoing effort to address the state’s growing backlog of replacement and rehabilitation needs for major bridges that are approaching the end of their useful life. By allowing for the use of a P3 delivery model, PennDOT will be able to replace or rehabilitate major bridges around the state more quickly, achieve significant savings for taxpayers, and minimize the impact on the traveling public. The purpose of the Pennsylvania Major Bridges Project is to deliver infrastructure improvements focusing on the rehabilitation and replacement of nine major bridges (and associated roadways) across the Commonwealth. Upon completion, it is estimated to be over $2B. The Bridging Pennsylvania Constructors team is led jointly by S&B USA Construction and FCC. The consortium members have a 20-year-long track record of successful project delivery with PennDOT, having worked in all PennDOT districts. POSITION SUMMARY The Contract Manager shall manage and oversee all contract-management functions per the assigned project and coordinate with the Commercial Manager and project team on matters necessary for maintaining compliance with all relative contracts, customer requirements, and applicable law. ESSENTIAL DUTIES AND RESPONSIBILITIES • Enforce and defend contractual interests of assigned subcontracts throughout the project lifecycle., • Identify and report subcontractor commercial and contractual issues within the constraints of the prime contract, customer requirements, and applicable law., • Fairly evaluate subcontractor changes and claims with respect to cause, effect, entitlement, pricing, and substantiation., • Prepare and/or review draft contractual correspondence for assigned subcontracts., • Assist and support the project team in the preparation of prime-contract notices, change requests, claims, and all other related contractual correspondence involving assigned subcontracts., • Assist the project team with contractual and commercial matters by developing strategies and providing recommendations to prevent, mitigate and/or transfer risk exposure., • Ensure compliance and manage maintenance of required contractual securities and insurance policies of assigned subcontracts., • Assist the project team in the development and implementation of contract-management policies, procedures, and systems., • Assist in the preparation of internal and external monthly reports on contractual and commercial matters., • Maintain logs, documents, correspondence, and registers for subcontractor contract files, correspondence, changes, claims, and risks & opportunities., • Complete all contract close-out activities at the conclusion of the project, including validation of all commercial obligations of assigned subcontracts., • As needed, support the Procurement team with preparation of contract terms and conditions., • All other duties as assigned. EDUCATION, SKILLS, & QUALIFICATIONS • Bachelor's degree in business, construction management or related degree. MBA or JD degree preferred., • Minimum of 5 years of work experience in a contract-management role within the construction industry, or 3 years’ experience directly managing contracts within the heavy civils construction industry., • Ability to interact with and present to Executives, Directors, and Managers across the project team, company, and externally, • Effective communication skills with the ability to collaborate at multiple levels of operations, personnel, and functional staff., • Strong negotiating skills with the ability to lead or support commercial/contractual negotiations with subcontractors, customers, suppliers, and partners., • Commercial acumen with a proactive approach to problem-solving., • Ability to work within internationally staffed teams., • Strong organizational skills with the ability to work effectively under pressure, meet tight deadlines, and manage conflicting priorities. PHYSICAL DEMANDS • Must be able to remain in a stationary position for long periods., • Requires visual ability to perform tasks: preparing and analyzing data, plans, drawings, outlines, viewing a computer, and extensive reading., • Requires the ability to physically operate standard office equipment, i.e., laptop, phone, keyboard, mouse, etc. BENEFIT SUMMARY Medical Insurance, Dental Insurance, Vision Insurance, 401K Plan, Life Insurance, Disability Insurance, Paid Time Off, Paid Holidays, and Relocation Assistance (if applicable). DESCRIPTION OF THE PROJECT The purpose of the Pennsylvania Major Bridges Project is to deliver infrastructure improvements focusing on the rehabilitation and replacement of nine major bridges (and associated roadways) across the Commonwealth. Upon completion, it is estimated to be over $2B. The Bridging Pennsylvania Constructors team is led jointly by S&B USA Construction and FCC. The consortium members have a 20-year-long track record of successful project delivery with PennDOT, having worked in all PennDOT districts. BPC is an Equal Opportunity Employer and does not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veterans’ status, military status or any other characteristic prohibited under Federal, State, or local laws. If a reasonable accommodation is needed for the interview process, please contact Tanya Sykes at Email: or Phone: 215-609-4258. ext 107.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier provider of engineering and industrial services, proudly supporting the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other Department of Defense (DoD) organizations. We are committed to fostering a collaborative culture where every employee's voice is valued, and opportunities for growth and development abound. At Continental Tide, you'll thrive in a fast-paced, dynamic environment that encourages innovation, skill-building, and the pursuit of excellence. Join our team of dedicated experts who are passionate about delivering cutting-edge solutions to support our nation's fleet. We look forward to welcoming you aboard! Job Description: We are seeking talented engineers to support critical naval engineering projects. This role includes 3D modeling, drafting, testing, and technical support to enhance the functionality and efficiency of Navy Air Conditioning and Refrigeration (AC&R) systems and equipment. Engineers will work closely with teams to provide innovative solutions for installation, testing, and maintenance of critical ship systems. Essential duties & responsibilities include, but are not limited to the following: \n • Technical authority for all Navy AC Plant, Modular Refrigeration Units (MRU) and legacy refrigeration systems and associated equipment and components to include surfaces ships, submarines, and aircraft carriers.\n, • Support design, modeling, analysis, and testing of all AC&R systems, subsystems, equipment, and components.\n, • Develop Ship Change Documents (SCD) and ShipAlts to input technical improvements to existing AC&R systems into the Fleet.\n, • Provide support for the life cycle of all AC&R equipment including design, installation, testing, logistics, technical refresh, and obsolescence.\n, • Provide test facility support to build/refresh and test AC&R systems and equipment.\n, • Support the Mission Readiness Panel requirements for testing at the Auxiliary Systems test facility.\n, • Perform equipment qualification testing (EQT) by developing, updating, and reviewing test procedures, witnessing tests, and reviewing test reports and waiver/deviation documentation.\n, • Support Non-destructive testing (NDT) of heat exchanger tubes in the condensers and evaporators.\n, • Execute Pressure tests and System Operational and Verification Tests (SOVT) tests shipboard.\n, • Provide engineering and technical support for ship modernization programs to include introducing new technologies and advanced control systems.\n, • Conduct Engineering surveys and drawing reviews to determine if system/equipment upgrades are required and feasible.\n, • Provide engineering in support of the obsolescence program to include design, testing, and evaluating components for proper form, fit, function, and operation.\n, • Review and analyze drawings to support material requirements and test plan/procedure development.\n, • Respond to and resolve Integrated Logistics System (ILS) technical feedbacks and technical manual deficiency reports through systems like Remedy and Navy 311.\n, • Identify technical issues and develop cost-effective solutions to improve system lifecycle management.\n\n Experience and Skills \n • \nEducation: Bachelor's degree in any mechanical or electrical engineering discipline from an accredited college or university.\n, • \nExperience: At least 3 years of professional engineering experience, with a focus on Navy AC&R systems (mechanical system design, repair, installation, modification, operation, maintenance, and testing)\n, • Strong understanding of Navy ship systems, including air conditioning, refrigeration, Fluid Systems, pumps, heat exchangers, actuators, and other associated equipment.\n, • Experience with control systems and variable speed (frequency) drives (VSD/VFD)\n, • Ability to troubleshoot mechanical and electrical systems.\n, • Proficiency in engineering and 3D modeling tools.\n, • Ability to support and execute technical testing and develop detailed reports.\n, • Team-oriented with strong problem-solving and communication skills.\n, • The ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is a must.\n, • Must have or have the ability to obtain a SECRET clearance.\n, • Travel of up to 25% may be required within and outside of the continental United States.\n, • Exposure to open-air environments, including noisy, hot, and cold conditions.\n, • Required to visit project sites aboard ships and rigs, both onshore and offshore.\n, • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required.\n, • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components.\n, • Exposure to sound levels exceeding 100 decibels.\n, • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment.\n, • May work in confined spaces with limited ventilation.\n, • Requires prolonged periods of sedentary work, including sitting and/or standing.\n, • May be required to operate machinery, power tools, and/or heavy equipment exceeding 20lbs.\n, • Must be able to communicate effectively, to exchange and comprehend information, & speak English.\n, • Frequent exposure to extreme weather conditions, including high heat and cold.\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: This role provides an excellent opportunity to contribute to innovative engineering solutions that support the operational readiness of the U.S. Navy. If you are an engineer passionate about making a difference, we encourage you to apply. To be considered you must apply by going to Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. See all of our latest opportunities at or follow us on our LinkedIn page at . Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans, and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Data Intelligence (DI) has an immediate need to add a Full Stack Angular/C# Developer for our Prime contract task order with Naval Information Warfare Center Pacific (NIWC PAC) Cyber Engineering and Integration Division (CE&I) (Code 584) tasking to provide System and Cybersecurity Engineering Support and Technical Services for the NGA Deployable Systems (NDS) and support for NGA Expeditionary Operations (XO) and NGA User-Facing Services (TEIC). This is an onsite position located in Northeast Philadelphia. Responsibilities: This role does demand the need for a true Full Stack developer, and understanding of the follow is critical: • Angular, • C#, • Dotnet framework and core experience, • GIT, • WPF Application, • Visual Studio, • Microsoft IIS, • MS SQL Server, • Experience with DevOPS/CI/CD best practices, • Web development experience (e.g. ASP.Net), • Container experience (e.g. Docker), • BS degree in Computer Science or related field, • Minimum 4 years of relevant experience in software development, • US Citizen, • At least secret level security clearance Data Intelligence, DI is an established small business that has supported the critical missions of our government clients since 2005. We provide full life cycle system development, systems engineering, cybersecurity, and supporting analytical and logistics support to C4ISR and other complex systems. We are an equal opportunity employer that offers competitive salaries, comprehensive benefits, a team-oriented environment, and opportunities for advancement. Our excellent employee retention record reflects our employee focus. We work with Veteran’s organization to proactively hire those who have served our country. We offer medical, dental and vision insurance, 401k, PTO and 11 paid holidays. Data Intelligence is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, age, color, religion, creed, sex, sexual orientation, gender identity, national origin, disability, or protected Veteran status.

Prime Staffing is seeking a travel CT Technologist for a travel job in Camden, New Jersey.Job Description & Requirements.At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates.Prime Staffing utilizes a unique matchmaking approach, providing the

Eddie V's Prime Seafood - 2000 Route 38 [Busser / Porter / Cleaner] As a Dishwasher at Eddie V's Prime Seafood, you'll: Ensure guests and team members have a clean, sanitized and safe environment and equipment; Wash, store and rack plateware, glassware, utensils, pots, pans and other smallwares and

Immediate Hiring Need for a Lead Carpenter. Our company is looking for a skilled Lead Carpenter to join our growing team. The Lead Carpenter will report directly to the Plant Manager and will learn responsibilities within all areas of the shop.

Join an award-winning team of dedicated professionals committed to our core values of quality, compassion and community! Roxborough Memorial Hospital, a member of Prime Healthcare, offers incredible opportunities to expand your horizons and be part of a community dedicated to making a difference. Ro

About the Company AnA Sourcing, LLC is a woman-owned, minority-owned small business dedicated and specializing in the sales of Industrial, Safety and MRO (Maintenance, Repair & Operations) items across a broad and distinguished government customer base. Since our inception in 1990, we have provided value and service to both federal and local government agencies, prime contractors, OEMs (original equipment manufacturer), and other commercial businesses. The cornerstone to our longevity and success is the steadfast belief in outstanding customer service and professionalism throughout the sales process. From the ease of quoting to your receipt of goods. Job Brief We are looking for an experienced Sales Account Manager to join our Sales Department. You will act as a liaison between our sales team and our clients, ensuring customer satisfaction. As a Sales Account Manager, you will work with government agencies and prime contractors to help supply the items and materials needed to complete their projects. This will be achieved by working with these companies to become a supplier and completing bid opportunities. In this role, you should showcase excellent communication and negotiation skills. You should also act proactively to address clients’ needs and facilitate the sales process from beginning to end. This is an inside sales position working in an office setting. Ultimately, you should contribute to an increase in sales and maintain our company-client relationships at a high standard. Hours are 8:00 am to 5:00 pm with an hour lunch. Salary will be between $40,000 - $50,000 plus commission and bonuses. Potential annual income can range between $80,000 to $150,000. Responsibilities Manage key government accounts Act as the point of contact for clients Prospect for new business by cold calling potential customers. Resolve problems and handle complaints in a timely manner Identify new potential customers Provide quotes to customers Keep track of current orders and backorders Establish best practices Monitor and report on sales performance analytics Suggest innovative ideas to increase sales and improve customer experience Benefits • 401(k) with Company Match, • Health Insurance, • Paid Time Off, • Fitness Reimbursement Program

Join an award-winning team of dedicated professionals committed to our core values of quality, compassion and community! Roxborough Memorial Hospital, a member of Prime Healthcare, offers incredible opportunities to expand your horizons and be part of a community dedicated to making a difference.Rox

Eddie V's Prime Seafood - 2000 Route 38 [Kitchen Staff / Grill Cook / Prep Cook] As a Line Cook at Eddie V's Prime Seafood, you'll: Prepare high-quality food items to order while exceeding guest expectations by following recipe and presentation guidelines; Ensure special guest requests are accommoda

Must be board certified or board eligible.Full-time and part time opportunities.Hospital employed (W-2) or 1099.Health insurance: self-funded EPO (HMO) no cost for provider.Extensive malpractice insurance including tail coverage.Prime Healthcare strives to deliver optimal patient care to local commu

Prime HealthCare Staffing is a specialized medical staffing firm that places RN’s and Rehab Therapists in exciting locations throughout the country, our sole focus is the success of our healthcare employees. Prime HealthCare Staffing is seeking a travel Outpatient Physical Therapist for a travel j

NDI Engineering Company is seeking an Electrical Engineer to join our team in the DDG51 Turbine Power Test Facility at the Philadelphia Navy Yard \n The ideal candidate will have experience in design of Naval Ship Hull, Mechanical and Electrical (HM&E) systems or power plant systems; have experience supporting design projects, particularly in AutoCAD; have experience applying the NEC; demonstrate an attention to details; and, possess strong communication skills. \n Job Responsibilities \n\n • Configuring equipment\n, • Reviewing procedures and test plans\n, • Performing computer based testing and simulation\n, • Hot plant testing\n, • Must be a U.S. Citizen and be able to obtain and maintain a U.S. Department of Defense Security Clearance.\n, • Must possess a Bachelor of Science in Electrical Engineering degree. \n, • Must have two (2) years’ experience in engineering systems as related to the area of design and modifications of steam and diesel driven electrical power generation systems and equipment.\n, • Must have experience using Microsoft Office and Outlook. \n

Travel Physical Therapist Allied.With Wanderly you can chat and apply to any agency with Wanderly’s Universal Application, below are the details of this.Specialty: Physical Therapist Allied.Travel Physical Therapist (PT) Allied : Voorhees, NJ.Travel Assignment Salary $1778/Week.Start Date : Decem

Travel Physical Therapist Allied.With Wanderly you can chat and apply to any agency with Wanderly’s Universal Application, below are the details of this.Specialty: Physical Therapist Allied.Travel Physical Therapist (PT) Allied : Voorhees, NJ.Travel Assignment Salary $1778/Week.Start Date : Decem

Prime Staffing is seeking a travel nurse RN Electrophysiology Lab for a travel nursing job in Philadelphia, Pennsylvania. • Specialty: Electrophysiology Lab, • Discipline: RN, • Start Date: 01/05/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel About the Position Specialty: Registered Nurse – Electrophysiology (EP Lab) Experience: Minimum 2 years of recent EP lab or cardiac cath lab experience required License: Active State or Compact RN License Certifications: BLS and ACLS required – include expiration dates Must-Have: All time-off requests must be submitted with the initial application Description: Seeking an experienced EP Lab RN to assist in electrophysiology procedures, including pacemaker and ICD insertions, ablations, and tilt table testing. Responsibilities include monitoring patients, administering medications, circulating during procedures, and assisting with conscious sedation. This role includes 10–12-hour shifts, with on-call, weekend, and holiday rotations as needed. Compliance may take 4–6 weeks. A voice and nurse manager interview are required. Shift make-ups may be necessary per departmental needs. Requirements Required for Onboarding: • Active RN License, • BLS, • ACLS Prime Staffing Job ID #34798370. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:ELECTROPHYSIOLOGY,08:00:00-16:00:00 At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates. Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Our experienced team takes the time to get to know both our clients and candidates, their needs, and preferences, to ensure that each placement is a success. We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Prime Staffing is seeking a travel CT Technologist for a travel job in Philadelphia, Pennsylvania. • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, • Employment Type: Travel About the Position Specialty: CT (Computed Tomography) Technologist Experience: Minimum 1 year of recent CT scan experience preferred License: ARRT (CT) certification required Certifications: BLS – AHA required Must-Have: Proficiency in operating CT scanners, contrast administration knowledge, patient positioning, radiation safety understanding \n Description: The CT Technologist performs diagnostic imaging procedures using computed tomography equipment to assist in the diagnosis and treatment of medical conditions. Collaborates with radiologists and ensures patient comfort and safety throughout procedures. \n Requirements Required for Onboarding \n\n • ARRT Certification with CT Credential\n, • BLS – AHA\n Prime Staffing Job ID #34923688. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Tech:CT Tech,19:00:00-07:30:00 At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates. Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Our experienced team takes the time to get to know both our clients and candidates, their needs, and preferences, to ensure that each placement is a success. We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

'Are You A Registered Nurse Interested In Servicing Inner City Youth At a Trade & Educational Institute? Are You Looking To Manage A Staff Of Healthcare Professionals? Apply To Our Open Health & Wellness Manager Position Today!' Responsible for the management and supervision of the Wellness Services Center. • Responsible for the provision of preventative and emergency health services and wellness education to students., • Ensures confidentiality of sensitive information and compliance with all HIPAA laws., • Supervises and manages the Wellness Services staff, Department and subcontracted Wellness services including mental health, dental and medical services., • Follows all integrity guidelines and procedures and ensures no manipulation of student data., • Manages wellness department and staff., • Ensures Center establishes and maintains Memorandums of Understandings with local hospitals and wellness related community resources., • Compiles and submits all required reports and plans per DOL/Corporate policy., • Ensures adequate staff coverage to meet the needs and requirements of the student population., • Oversees and manages the Wellness budget and identifies and secures cost-saving measures., • Acts as Center liaison with local agencies for purchasing applicable third-party health insurance for students, coordinating health services, environmental health inspections and other health-related issues., • Evaluates student health issues and concerns and makes referrals as appropriate., • Maintains and revises current health care guidelines to ensure quality and effective wellness services to students., • Coordinates and oversees the chronic condition case management programs., • Complies with local and federal guidelines for the administration of all medications and maintenance of medical records., • Ensures adequate inventory of medical equipment and supplies., • Works with Safety and Security Department to complete and submit required Significant Incident Reports., • Ensures compliance with HIPPA and other applicable laws and regulations regarding patient privacy and the maintenance of medical records., • Proactively manages the Center’s medical separation process and ensures that students are provided with the required medical services and referrals to ensure student return and completion of the Job Corps program., • Ensures Wellness Department Participation and active membership in the Center’s HEALs (Healthy Eating, Active Lifestyles) Committee. May serve as the wellness representative on the committee., • Fills staff vacancies in a timely manner. Effectively motivates, empowers and requires staff to perform his/her job responsibilities. Employs sound time-management and delegation skills. Holds staff accountable for producing quality work, develops staff for career progression and holds accountable any staff that fail to meet goals., • Provides required/supplemental training for new and current employees., • Motivates and manages staff to work effectively, creates a supportive work environment, recognizes staff accomplishments and proactively addresses staff performance concerns., • Mentors, monitors and models the Career Success Standards as required by the PRH., • Shows respect and courtesy to students and holds them accountable for their actions and behavior., • Provides quality programs and services for students and ensures that quality is maintained and student needs are met. Pursues improvement and enhancement of programs and services., • Exchanges ideas and information, both orally and in writing, in a clear and concise manner and contributes meaningfully to group efforts by offering relevant ideas and knowledge. Provides quality and timely information to DOL/Company when requested., • Effectively articulates thoughts and ideas. Identifies problems, analyzes causes and evaluates appropriate solutions prior to taking or recommending actions. Follows up to ensure prompt/appropriate action is taken and that problems are in fact corrected., • Works in partnership with staff from all Departments to ensure effective supervision and services are provided to students., • Accepts direction and supervision from the Center Director/Center Duty Officer/Shift Manager to include assignments to temporarily perform job responsibilities of other departments and positions., • May not serve as both the Health and Wellness Director and the Nurse Practitioner (NP), Physician Assistant (PA), or Certified Nursing Assistant (CNA) instructor. The Health and Wellness Director is a single dedicated position and may not serve in any other capacity on the center., • Other duties as assigned. Qualifications • Registered nurse., • Minimum of an Associate of Arts degree in nursing. Active, unrestricted license to practice in state where center is located., • Three years of health care experience, with at least one year in a supervisory capacity required., • Regional Approval required. “Adams and Associates, Inc. abides by the requirements of 41 CFR §§ 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on characteristics protected by federal, state or local laws. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to their protected veteran status or disability.” This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.”