Trabajos quality engineer en Atlanta, GeorgiaCrear alertas

We are seeking an experienced and highly motivated Power & Hardware Design Engineer to serve as a technical authority for power systems, standards, and hardware engineering within Amazon's global fulfillment center network. This role will drive the standardization and innovation of power distribution and hardware solutions for material handling operations, focusing on safety, scalability, and operational excellence. As part of OneMHS (One Material Handling Systems), you will transform how Amazon designs, builds, and operates its material handling capabilities through advanced power system strategies and hardware development. The ideal candidate will have a proven track record in power system design, power distribution, controls engineering, and hardware development for complex material handling systems including tote/parcel conveyance and sortation. You will work closely with WWDE, Operations Engineering, strategic suppliers, and cross-functional teams to deliver robust power and hardware solutions while considering long-term system performance, policies, and maintenance programs. This role requires deep technical expertise to create engineering standards that influence mechanical engineering design and contribute to multi-year roadmaps for system evolution — as well as the tactical execution to standardize deliverable clarity and quality, promoting excellence in project delivery. Key job responsibilities Power Systems Design & Distribution • Design, engineer, and optimize 3-phase power systems and power distribution for industrial and commercial material handling applications, • Design and specify Main Distribution Boards (MDBs), Power Distribution Panels (PDPs), and electrical substations, ensuring proper sizing, protection coordination, and compliance with project and code requirements, • Develop single-line diagrams, power distribution schematics, and panel schedules to support facility and equipment power needs, • Perform power quality analysis, fault current studies, and coordination studies to ensure system reliability and safety, • Select and specify transformers, switchgear, breakers, bus ducts, and other power distribution equipment, • Design modular and scalable power distribution systems that prioritize reliability, maintainability, and performance, • Establish best practices for panel placement, grounding, and safety circuit design Load Calculations, Arc Flash Studies & A/E Drawing Sets • Perform detailed electrical load calculations including demand factor analysis, diversity factors, and future capacity planning, • Perform arc flash calculations and hazard analysis in accordance with IEEE 1584 and NFPA 70E, determining incident energy levels, arc flash boundaries, and appropriate PPE categories for all electrical equipment, • Develop and maintain arc flash labeling programs and ensure all MDBs, PDPs, substations, and downstream equipment are properly labeled and compliant, • Perform detailed calculations to establish electrical standards and specifications across the OneMHS program, • Prepare and review complete Architectural/Engineering (A/E) drawing sets, including electrical plans, riser diagrams, panel schedules, and equipment layouts, • Coordinate with multidisciplinary engineering teams (mechanical, structural, civil) to ensure integrated and constructible designs, • Manage drawing revisions, as-built documentation, and ensure compliance with project specifications Utilities Data Analysis • Analyze utilities data including electrical consumption, demand profiles, power factor, and load trends across fulfillment center operations, • Monitor and evaluate utility rate structures, demand charges, and energy usage patterns to identify cost optimization opportunities, • Develop utilities dashboards and reporting mechanisms to track power consumption, peak demand, and efficiency metrics across facilities, • Collaborate with Facilities and Operations teams to provide data-driven recommendations for power system upgrades, capacity planning, and energy efficiency improvements, • Support utility coordination efforts including service entrance requirements, utility metering, and interconnection agreements for new and existing facilities Hardware Design & Development • Perform hardware design and development of electrical and electromechanical systems, including: ◦ Variable Frequency Drives (VFDs) — selection, integration, and commissioning ◦ Sensors — specification, calibration, and deployment of industrial sensors (temperature, pressure, vibration, current, etc.) ◦ Predictive Maintenance Systems — design and implementation of condition-monitoring hardware, remote monitoring, and IoT-based predictive maintenance solutions • Evaluate and integrate emerging technologies including DC power systems and AI-powered diagnostics, • Drive prototype development, testing, validation, and production-readiness of hardware solutions, • Develop technology that creates or maintains competitive advantage in power systems and hardware OneMHS Program Specifications • Prepare, develop, and maintain technical specifications for the OneMHS program, ensuring alignment with organizational standards and project requirements, • Author and review equipment specifications, performance criteria, and acceptance test procedures for MHS components and subsystems, • Collaborate with OneMHS program stakeholders, vendors, and cross-functional teams to define and standardize specification requirements across projects, • Ensure all OneMHS specifications incorporate power, controls, safety, and code compliance requirements, • Audit electrical system designs to identify opportunities and develop superior solutions, • Drive continuous improvement of specification templates and documentation processes to support scalability and consistency across the OneMHS program, • Develop and document repeatable electrical processes for scaled deployment Standards & Code Compliance • Ensure all designs, installations, and hardware solutions comply with the National Electrical Code (NEC) / NFPA 70 and other applicable standards, • Ensure arc flash studies and labeling comply with NFPA 70E and IEEE 1584 across all facilities, • Use electrical reliability and maintenance expertise to perform gap assessments to industry standards, • Serve as the subject matter expert on electrical codes, standards, and best practices across the organization, • Conduct design reviews and audits to verify code compliance and identify potential safety risks, • Stay current with NEC code revisions, NFPA updates, and industry regulatory changes Technical Collaboration & Knowledge Sharing • Provide technical mentorship and guidance to junior and mid-level electrical engineers and designers, • Participate in and lead design reviews for complex and critical power and hardware systems at site and region levels, • Collaborate with cross-functional stakeholders including Operations, Facilities, Construction, WWDE, and Safety teams, • Coordinate with third-party partners for power system design, permitting, and installation, • Build consensus and harmonize differing views on power system approaches, • Educate the broader fulfillment center engineering community on advanced power system issues, • Support development of electrical implementation playbooks and ensure effective knowledge transfer and documentation, • Contribute to intellectual property (inventions, patents) in power systems and hardware engineering Project Execution & Risk Management • Execute power and hardware projects through all phases from initiation through commissioning, • Drive continuous improvement in project delivery methods and execution standards, • Identify and mitigate risks proactively, • Maintain stakeholder alignment and satisfaction throughout the project lifecycle, • Use data and metrics to back up assumptions and evaluate outcomes A day in the life Collaborate with cross-functional teams to support power system design and hardware development with industry-leading performance in reliability, safety, and resilience. Design and review MDBs, PDPs, and substation configurations while performing arc flash studies to ensure worker safety across all facilities. Analyze utilities data to identify trends, optimize power consumption, and support capacity planning for new and existing fulfillment centers. Develop mechanisms to assist in executing material handling system power and hardware implementations while establishing standardized processes for ensuring optimal performance across facilities in future deployments. Create and deliver detailed technical designs and execution plans to drive implementation from initiation through commissioning, ensuring program success across multiple simultaneous projects. Interface with strategic partners to ensure successful integration of Amazon-spec equipment and hardware while maintaining the highest standards of safety and performance. Amazon offers a full range of benefits that support you and eligible family members, including domestic partners and their children. Benefits can vary by location, the number of regularly scheduled hours you work, length of employment, and job status such as seasonal or temporary employment. The benefits that generally apply to regular, full-time employees include: 1. Medical, Dental, and Vision Coverage, 2. Maternity and Parental Leave Options, 3. Paid Time Off (PTO), 4. 401(k) Plan If you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skillsets. If you’re passionate about this role and want to make an impact on a global scale, please apply! About the team One MHS is the central material handling systems organization within Amazon's global fulfillment center network. Our engineering teams design and deliver state-of-the-art power, hardware, and controls systems that keep the world's supply chains moving. We are committed to excellence, safety, and the professional growth of every team member. • Bachelor's degree in electrical engineering or equivalent, • Experience with large scale mechanical and power systems, • Experience solving problems with technology in the Energy & Utilities industries, • 1+ years of developing electrical schematics using AutoCAD Electrical (2010 or newer) experience, or Master's degree in electrical or mechanical engineering, engineering technology or equivalent, • Experience in hardware design and validation of components, subsystems and systems, • Experience in material handling systems (MHS) installation, operation and maintenance, • Experience and strong technical background in relevant fields of automated or non-automated material handling equipment, • 4+ years of experience in power systems design, electrical engineering, and/or hardware development, preferably in design, specification, and execution of large-scale complex material handling systems, • Proven expertise in 3-phase power system design and power distribution for industrial or commercial environments, • Proficiency in performing arc flash calculations and hazard analysis per IEEE 1584 and NFPA 70E, • Thorough understanding of NEC Code (NFPA 70) compliance, including Articles 210, 215, 220, 230, 240, 250, 430, and 480, • Proficient skills in AutoCAD and Autodesk tools, • Familiarity with power analysis software (e.g., SKM PowerTools, ETAP, EasyPower), • Able to travel up to 30%, US and International, • Master's degree in Electrical Engineering, • BS degree in electrical engineering or equivalent, • Knowledge of safe electrical practices according to guidelines set by relevant electrical safety supervisory bodies (e.g., ECSSAI and RECI in Ireland), • Knowledge of current industry standards, • 4+ years of automated conveyor systems and controls experience, • Experience of automated equipment including packaging machinery, sortation and conveyor systems, • 3+ years of PLC/SCADA integration experience, • Experience with electrical systems, • Experience prioritizing and handling multiple assignments at any given time while maintaining commitment to deadlines, or experience in a fast-paced, high-tech company, • Familiarity with IoT platforms and Industry 4.0 concepts for predictive maintenance, • Knowledge of data center power infrastructure and electrical distribution systems, • Experience with utility coordination, rate analysis, and energy management systems (EMS), • Experience in manufacturing/operations/supply chain analysis and process improvement (e.g., Lean Six Sigma), • Six Sigma certification, • Certifications such as Certified Energy Manager (CEM) or Certified Maintenance & Reliability Professional (CMRP), • Experience working with material handling OEMs and electrical integration partners, • Track record of establishing standardized electrical processes and playbooks, • Proven track record of delivering complex technical projects on time and on budget, • Strong cross-functional collaboration and stakeholder communication skills, • Excellent written and oral communication skills, proven problem-solving skills, and strong organizational skills, • Demonstrated ability to use data and metrics to back up assumptions and evaluate outcomes Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at _. USA, GA, ATLANTA - 117,300.00 - 160,000.00 USD annually USA, GA, Atlanta - 117,300.00 - 160,000.00 USD annually USA, OH, CINCINNATI - 117,300.00 - 160,000.00 USD annually USA, OH, Cincinnati - 117,300.00 - 160,000.00 USD annually USA, TN, NASHVILLE - 111,500.00 - 160,000.00 USD annually USA, TN, Nashville - 111,500.00 - 160,000.00 USD annually USA, TX, AUSTIN - 117,300.00 - 160,000.00 USD annually USA, TX, Austin - 117,300.00 - 160,000.00 USD annually USA, VA, ARLINGTON - 117,300.00 - 160,000.00 USD annually USA, VA, Arlington - 117,300.00 - 160,000.00 USD annually USA, WA, SEATTLE - 117,300.00 - 160,000.00 USD annually USA, WA, Seattle - 117,300.00 - 160,000.00 USD annually

Job Description Opto-Alignment Technology, Inc. (OATI), a world leader in the development and sales of precision optical alignment and metrology systems, is seeking a talented, enthusiastic and hands-on Associate Production Engineer to join our growing business in Charlotte, NC. This position is based in our Charlotte, NC HQ. Opto-Alignment is highly recognized as a quality developer and supplier of state-of-the-art laser-based systems for precision optics alignment, assembly, and inspection. The successful candidate will work within the Production team to build, align, qualify our subsystems and full products. The candidate is expected to be hands on, organized, detail oriented, have a high sense of quality, and be capable of multi-tasking. Alignment with our core values of Integrity, Engagement, Customer Focus, Continuous Improvement, and Respect is crucial for success in this role. Job responsibilities: • Work with the production team on assembly and testing of all products, with heavy emphasis on electronic and mechanical components., • Carefully follow work instructions and help maintain and create documentation, including but not limited to, wiring schematics and diagrams, work procedures and quality control., • CAD (SolidWorks) support for production activities, such as BOM creation and drawing updates, • Support the R&D team with new product development., • Help with packing, crating, and shipping products. Carpentry experience a plus. Requirements: • Associates (2-5 years of experience) or BS in Mechanical Engineering (0-3 years of experience) or equivalent in a related discipline., • Experience in System assembly/Production roles. Background in optics and optical assembly preferred., • Must have hands-on experience with Electrical and Systems manufacturing tools (soldering, voltmeters, crimper, etc. )., • SolidWorks CAD experience, including drawing creation and assembly modeling., • Strong communication, interpersonal and organizational skills., • US citizenship or Permanent Residency is required for compliance with ITAR regulations., • Ability to occasionally travel domestically and internationally (less than 15%) Note that this job is on-site in Charlotte, NC. \nCompany Description Opto Alignment, located in Charlotte NC, is a leading manufacturer of ultra precision alignment, assembly and inspection optical systems. Our flagship product, the Laser Alignment & Assembly Station (LAS), employs latest generation illumination and vision technologies, along with computer automation, to achieve sub-micron centering precision. For more than 30 years, Opto Alignment is a recognized leader in the field of optical instrumentation where we offer complete solutions for opto-mechanical design, ultra precision machining, system manufacturing and assembly services ranging from the visible to the infrared spectrum. Opto Alignment, located in Charlotte NC, is a leading manufacturer of ultra precision alignment, assembly and inspection optical systems. Our flagship product, the Laser Alignment & Assembly Station (LAS), employs latest generation illumination and vision technologies, along with computer automation, to achieve sub-micron centering precision. For more than 30 years, Opto Alignment is a recognized leader in the field of optical instrumentation where we offer complete solutions for opto-mechanical design, ultra precision machining, system manufacturing and assembly services ranging from the visible to the infrared spectrum.

Job Description Practice Leader - Electrical Transmission & Distribution Location: Flexible within S&ME footprint Requisition Number: 2026-2690-04 S&ME is seeking a motivated and results-driven Practice Leader to help us expand into and lead our growth in the Electrical Transmission & Distribution market across the organization. As the Electrical Transmission & Distribution Practice Leader, you'll play a pivotal role in shaping S&ME's presence in a high-demand, rapidly evolving market by driving new revenue, building client partnerships, and developing high-performing teams. The Electrical Transmission & Distribution market segment is part of S&ME's Energy Market, where we utilize our life cycle approach, utilizing our core services of environmental, civil, and geotechnical engineering, along with construction materials testing services and special inspections to support our utility and private clients. If you're passionate about leading teams, driving growth, and influencing strategy, we invite you to join our team. This individual can be based near any S&ME office location. What You Will Do: Drive Growth and Market Expansion • Develop and execute a strategic growth plan for the Electrical Transmission & Distribution, • Identify and pursue new business opportunities to achieve and exceed revenue targets within the market for our key services: environmental, civil, and geotechnical engineering, along with construction materials testing services and special inspections. Build Relationships that Matter • Establish and grow key client relationships at both local and national levels within the market, • Collaborate with local operations and expand existing client relationships, • Leverage your network and industry presence to position S&ME as a trusted partner, • Deliver exceptional client experiences that lead to repeat business and long-term partnerships Lead, Build, and Inspire Teams • Partner with internal leaders to build the team, capabilities, and resources needed to scale, • Mentor and lead multidisciplinary teams to deliver high-quality solutions, • Foster a culture of collaboration, accountability, and growth Deliver Excellence • Ensure projects are executed with a focus on quality, safety, and client satisfaction, • Stay ahead of market trends, emerging technologies, and competitive dynamics, • Champion innovation and continuous improvement to keep S&ME at the forefront What You Bring: • Proven success driving revenue growth of our core services (geotechnical, environmental, civil and construction materials testing/special inspections) within Electrical Transmission & Distribution, or similar markets, • Strong network and client relationships in the Power & Utilities sector, • 10+ years of progressive experience in project/program or market leadership roles, • You have a proven track record of winning and delivering opportunities for multiple clients within the electrical transmission & distribution market, • A Professional Engineer license (PE) is a plus, • Project Management Professional (PMP) is a plus Our Culture: Built on Values We don't just talk about values-we live them. They are integral to our daily operations, shaping our behaviors, culture, work, and teams every single day. • Listen First, Work and Grow Together. Do the Right Thing and Do Things Right, Do What You Say, Lead from Where You Are, and Be Safe We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of approximately 1,100 employee-owners across 10 states collaborates to create a meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a rewarding career. Here's what you can look forward to: • Medical, Dental & Vision Plans with HSA and FSA options, • Wellness Program - $50 off per month on your 2027 premiums!, • Pet Insurance, • Term Life & Long-Term Care Coverage - available Spring 2026, • 100% Employee Stock Ownership Plan (ESOP) with a minimum 5% company contribution, • 401(k) Retirement Plan, • Paid Holidays and Paid Time Off (PTO) - with rollover options, • Paid Maternity & Parental Leave, • Mentorship & Career Development Programs, • Credential Incentive Program - get rewarded for advancing your skills, • Tuition Reimbursement, • Employee Recognition Program, • Company Vehicle & Fuel Card - for project-based roles, • $2,000 Employee Referral Bonuses - and more! Ready to build something bigger? If you are seeking a challenging and rewarding career with a firm committed to our employees and providing quality service to our clients, join our team! This is a full-time position with competitive pay based on experience. The successful candidate must meet the requirements of the company's Fleet Management Program, Substance Policy, and Reference Check Program. Submit resume, cover letter, and salary expectations for consideration. Only qualified candidates with acceptable employment eligibility verification (I-9) will be considered. Visa assistance is not provided. S&ME reserves the right to fill this position with an internal or external candidate at any time during the search. S&ME is not responsible for unauthorized job postings or submissions of resumes using external links/websites. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job DescriptionDescription: The Clinical Applications Manager optimizes the Nextgen PM/EMR and other clinical applications and supports the day-to-day clinical technology operations including new implementations, content management, training material and quality assurance. They collaborate with key operations and clinical leaders to identify and implement ongoing improvements to workflows and use of technology. The Clinical Applications Manager possesses and demonstrates an in-depth knowledge and skill in the areas of healthcare applications and related technology. They understand healthcare software, explain technical concepts to non-technical professionals, and translate administrative and operating requirements into clear, specific, and actionable curricula and then implement accordingly. The Clinical Application Manager is a leader for the portfolio of clinical technology applications leveraged by Georgia Urology, including Nextgen (EMR, PM, Portal, Mobile) Phreesia, PACS, LIS, Lab interfaces, and other similar or integrated Healthcare Information Technologies. Requirements: · Assesses how clinical, administrative, and financial roles interact with clinical technology to help optimize workflows as they interact with the technology. · Lead workflow analysis and technical assessments of clinical application use · Audit and as needed train providers and/or staff meet with staff at sites, Soft Go Live and Go Live support and post-implementation support. · Maintain and create documentation of manuals and workflows as it relates to the usage of clinical applications · Participate and manage open support issues with clinical application vendors · Maintain continuing education activities and actively participate in related networking and user groups to continually improve knowledge on industry technology and awareness of best of breed solutions and trends. · Provide support to the System Software Engineer with respect to maintaining data and reporting within the Nextgen System · Participates in regulatory related discussions and stays current on related topics that affect Georgia Urology’s deployed clinical application software portfolio. · Assist the Training team as needed for developing training documentation, curricula and identifying opportunities for retraining · Manage the clinical application team.

Job DescriptionDescriptionWaggoner Engineering, Inc. is seeking an Area Manager to join our team in Atlanta, GA. This role supports our continued growth and offers the opportunity to work on (or support) meaningful projects alongside a collaborative, experienced team. You’ll have the chance to build your career while contributing to impactful solutions across the communities we serve. The Area Manager position provides the vision, leadership, and management necessary to ensure business growth and effectiveness within their assigned geographic market area while ensuring the development, implementation, and coordination of projects, plans, and programs, and the formulation and regulatory compliance of related policies and procedures, subject to approval by the Vice President. The position accomplishes this through a respectful, constructive, and energetic collaborative and team-oriented style guided by the objectives of the company. Key Responsibilities • The Area Manager brings a strong project management competency level with experience to support effective completion of all projects within their assigned geographic area., • The Area Manager brings an advanced level of business acumen in working with clients and interfacing with clientele on a regular basis, representing our brand with integrity and multidisciplinary expertise., • The Area Manager will actively lead and drive the growth of business development opportunities for Waggoner Engineering., • The Area Manager will identify, train, and develop leaders within the company and set them on the path for management., • The Area Manager will maintain a working knowledge of all phases of operations within their assigned geographic area, coordinate to support operations throughout the business, and provide regular performance updates to the senior leadership team., • The Area Manager will create and implement a strategic one-page plan to help track Waggoner and Trilon company KPIs., • The Area Manager will work closely with Human Resources and the Senior Leadership team to define and implement operational strategy, structure, processes, and successful performance., • The Area Manager will provide oversight and strategic guidance related to project budgets, financial performance, and resource planning., • The Area Manager will support the Vice President with financial reporting responsibilities and performance monitoring to identify efficiency issues and propose solutions proactively., • The Area Manager will guide, direct, and evaluate the work of all Project Managers within their assigned geographic area., • The Area Manager will monitor cash flow of their assigned geographic area and work with Project Accountants and Project Managers to ensure timely payment from clients.Essential Functions, • Provide day-to-day leadership and management that mirrors the company's adopted mission and core values., • Responsible for providing leadership and support to Project Managers in achieving business, operational, and client service goals for the assigned geographic area., • Responsible for the measurement and effectiveness of all processes, internal and external. Provides timely, accurate, and complete reports on the operating condition of the assigned geographic area., • Spearhead the development, communication and implementation of effective business growth strategies and processes in their market area and the achievement of the growth metrics., • Collaborate with the management team to develop and implement plans for the operational infrastructure of systems, processes, and personnel designed to accommodate our organization's growth and profitability objectives., • Motivate, mentor, and support a collaborative and high-performing team; assist with the recruitment and retention of staff; provide mentoring and training to project managers as a cornerstone to the career development program., • Fosters an environment of teamwork and collaboration., • Participates in regularly scheduled operations meetings with the Vice President to discuss operating performance, resource sharing and leveling, and process improvement., • Participate in the business planning process of the company., • Participate in other assignments and committees assigned by the Vice President from time to time., • Act as lead client account manager and project manager for high-profile clients and large projects within their assigned geographic area., • Foster a collaborative, accountable, and team-oriented environment focused on client success and employee development., • Represent the firm with clients and business partners.Position Competancies:, • Business Leadership - Grows business through client assignment awards that produce sales and profitable revenue. Works with the Vice President and other company leaders to develop operational processes and systems and drives continuous improvement in all organizational processes and practices. Anticipates challenges and takes preventive measures to maintain operating effectiveness. Maximizes shareholder returns and ownership value. Acts on opportunities and takes calculated risks to ensure growth and advance the company’s financial position. Manages risk appropriately to protect the interest of the organization., • Client Leadership - As a trusted advisor, meets client expectations by knowing their businesses and delivering timely value-added, high-quality, innovative, and sound recommendations and services through themselves or a team. Positions the company competitively by building a reputation for exceptional client services and delivering “best-in-class” industry solutions; instills and mentors project managers on the value of client relations and project delivery., • People Leadership - Creates a culture of trust, teamwork, collaboration, and recognition by treating people with dignity and respect. Motivates individuals and teams to perform at or above their expected performance metrics. Helps others recognize their potential by providing opportunities to succeed, establishing clear performance goals and accountability, delegating, teaching, coaching, and appreciating excellence. Encourages innovation and risk-taking and demonstrates a willingness to champion ideas. Develop strategies to attract, select, and retain high-caliber key staff to perform critical roles. Supports diversity in the company’s talent base. Builds cohesive teams and facilitates relationships at all levels to capitalize on mutually beneficial opportunities for teaming, collaboration, and networking. Demonstrates ability to analyze workforce requirements to sustain profitability and achieve strategic growth objectives. Work closely with the President, Vice Presidents, and project and discipline managers to share and level human resources throughout the company and support effective resource planning and collaboration across teams. Mentors, trains, and supports project managers., • Professional Leadership - Models the company’s core values and leadership behaviors by setting a personal example. Ensures that others adhere to the company’s culture, standards, and core values. Builds and maintains excellent partner, community, and government relations by participating in legislative processes, special interest group meetings, advisory committees, industry organizations, and community outreach programs. Creates and fosters collaborative relationships with industry peers to establish strategic partnering opportunities, resolve business issues, and identify best practices., • Strategic Leadership - Participates in the development of the Company’s purpose, vision, mission, core values, and strategic plan. Translates, aligns, prioritizes, and executes broad strategies by establishing clear objectives and ensuring initiatives are developed to support those strategies. Inspires a shared organizational vision and influences others to see the company of the “future.” Proposes shifts in strategic direction in response to anticipated risks with innovative solutions and breakthrough ideas. Understands the competition and gains competitive advantage., • Financial-Fiscal Management - Ensures that financial management and control functions are integrated into all business operations; drives planning process and ensures annual strategic priorities are integrated into business unit financial plans; ensures that due diligence and judgment are incorporated into all business decisions; understands financial structure and its primary objectives related to profit, return on investment, cash flow, balance sheet, and establish financial ratios; ensures that financial plan and financial objectives are met, evaluates issues and recommends action or takes appropriate steps to improve results, rigorously uses process improvement methodology to establish capability to achieve strategic business objectives., • Growth Management - Ability to align major workgroups and their systems and processes to achieve growth objectives while maintaining exceptional project management quality; develops and ensures the execution of strong marketing systems to grow existing client revenue and attract new clients and projects; develops, implements, and monitors growth plans in alignment with the strategic objectives; demonstrates strong client relationship building skills in attracting and growing long-term clients., • Operational Management - Uses familiarity with targeted markets to develop, implement and monitor long-term operating plans consistent with business strategies; monitors business environment and company operating performance to adjust activities to achieve desired results; demonstrates knowledge of operational controls and administrative reporting procedures, marketing and people systems to achieve success; identifies major client performance requirements and links critical information and resources across business units to meet requirements.Supervisory Responsibility This position has overall supervisory responsibility for all Project Managers and Client Account Managers within the assigned geographic area. This position reports to the Vice President, wherein the assigned geographic area resides. Work Environment This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Position Type/Expected Hours of Work This position may occasionally require extended hours or travel based on business needs, project priorities, or client commitments. Travel Travel outside the local area and overnight travel is expected to meet operating unit needs. What you'll need • Bachelor's degree in engineering or related field., • At least ten years of strong operating management experience in the consulting engineering environment., • Demonstrated experience in professional services business development and growth., • Demonstrated experience in financial planning and analysis with previous experience overseeing projects and operating units., • Skilled in organizational development, personnel management, budget and resource development, and strategic planning for projects and operating units., • Excellent people skills and ability to partner with a dynamic leadership team., • Possess personal integrity, credibility, and commitment to corporate mission., • Adaptable and comfortable managing multiple priorities in a dynamic and evolving environment while driving toward clarity and solutions; demonstrated resourcefulness in setting priorities and guiding investment in people and systems.Preferred:, • Master’s degree in business or related field., • At least five years in a senior management role., • Certification as a professional engineer, professional geologist, or PhD in other related professional fields.#LI-SG1 Why Join Our Team We know work isn't only about what you do, it's also about who you work for and with! Waggoner Engineering provides a fun, family-friendly, and multicultural work environment that supports a work life balance, including: • WEI Incentive Program, • Healthy Workplace Program, • Employee Referral Bonus, • Competitive Health Benefits, • Career Development and Training, • Flexible/Hybrid Schedule, • Community Service Opportunities Waggoner Engineering, Inc. is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description Position: Data Analyst Location: Onsite, Atlanta, GA Position Summary The Data Analyst supports the Client’s Customer Service Improvement Project (CSIP) by collecting, analyzing, and reporting data that informs grants management, program oversight, monitoring, and decision-making for the Client. This role conducts both quantitative and qualitative analyses, develops repeatable and sustainable analytical products, and supports leadership and program staff through timely, accurate, and well-documented data outputs. The Data Analyst works closely with the Data Engineer/Data Project Lead, Data Visualization Specialist, and program staff to ensure analyses are methodologically sound, aligned with user needs, and compliant with federal data standards. Primary Responsibilities • Collect, compile, clean, and analyze data from multiple sources to support Head Start grants management, monitoring, and oversight activities., • Conduct quantitative analyses using structured datasets and qualitative analyses of narrative documents, forms, applications, and reports., • Identify trends, patterns, anomalies, and areas of risk or improvement related to program performance and operations., • Prepare high-quality analytical reports, summaries, and data tables to support Regional Office, Central Office, and leadership needs., • Support recurring and ad hoc reporting, including management information reports, trend analyses, and leadership briefings., • Track, prioritize, and respond to data requests in coordination with project leadership and Client staff., • Assist with rapid-turn analyses and short-notice leadership requests., • Support implementation of repeatable, sustainable data practices for ongoing and recurring analyses., • Work collaboratively with data engineering, visualization, and program teams to align analyses with operational needs., • Support data-informed evaluation of workflows and business processes and contribute to improvement recommendations. Required Qualifications • Bachelor’s degree in statistics, mathematics, economics, data science, or a related field., • 3+ years of post-baccalaureate professional experience performing data analysis or related work., • 1+ years of experience analyzing quantitative data & synthesizing findings into clear written products., • 1+ years of experience with Excel, Python, R, and preferably Smartsheet,, • 1+ years of experience with SQL, GIS, Data Visualizations, Survey Methodology or Implementation, • 1+ years of experience with application of AI Tools: GitHub, R, Qualtrics, Tableau or Power BI, ArcGIS, • 1+ years of experience supporting federal programs or grants management environments; early childhood or Head Start/Early Head Start is preferred., • US government-issued security clearance required (will be initiated upon hire), • Valid driver’s license and ability to pass an MVR check. Preferred Qualifications • Demonstrated ability to work with multiple data sources and manage competing priorities., • Strong analytical and critical thinking skills., • Experience using analytical tools such as Excel and scripting or statistical languages (e.g., Python, R)., • Ability to communicate analytical findings clearly to both technical and non-technical audiences., • Strong organizational skills and attention to detail., • Ability to work independently and collaboratively in a team-based environment., • Experience supporting federal programs or grants management environments., • Familiarity with qualitative data analysis and review of narrative program documentation., • Experience working with data layers, dashboards, or visualization tools (e.g., Tableau, Power BI)., • Knowledge of early childhood or Head Start programs. \nCompany Description Our mission is to empower our clients to achieve sustainable success through efficient, cost-effective, and scalable solutions that drive significant performance improvements. We believe in delivering value-driven results and fostering a culture that attracts and retains top talent to provide scalable, adaptable services. Our mission is to empower our clients to achieve sustainable success through efficient, cost-effective, and scalable solutions that drive significant performance improvements. We believe in delivering value-driven results and fostering a culture that attracts and retains top talent to provide scalable, adaptable services.

Job Description:\n\n Position Summary\n Wesley International is seeking a Senior Electrical Engineer with extensive experience in electrical engineering, manufacturing, automotive and specialty vehicle systems, quality improvement, diagnostics, troubleshooting, and advanced product development.\n This is a senior-level technical position requiring an experienced electrical engineer who can independently evaluate complex electrical systems, identify root causes of failures, resolve recurring quality issues, and implement sustainable engineering improvements.\n The ideal candidate will bring significant experience working within automotive, specialty vehicle, trailer, industrial equipment, or manufacturing environments, with particular value placed on experience with Electric vehicles, stock chasers, utility vehicles, pallet Jacks, trailers, and other specialized vehicle platforms.\n The Advanced Senior Electrical Engineer will serve as a key technical resource responsible for improving the reliability, quality, performance, manufacturability, and functionality of Wesley International's products and electrical systems.\n This position requires a highly analytical and hands-on engineer who is comfortable moving from engineering design and analysis to physical diagnostics, troubleshooting, prototype testing, manufacturing support, root-cause analysis, and implementation of corrective and preventive actions.\n Core Responsibilities\n Advanced Electrical Engineering\n \n Lead advanced electrical engineering activities for new and existing products, equipment, vehicles, and systems.\n Develop, evaluate, and improve electrical architectures, power distribution systems, wiring systems, controls, and electrical interfaces.\n Design and review electrical schematics, wiring diagrams, harnesses, control systems, and electrical assemblies.\n Select electrical components based on technical requirements, reliability, performance, environmental conditions, manufacturability, and cost.\n Perform advanced electrical analysis and engineering calculations.\n Evaluate electrical system performance and identify opportunities for improvement.\n Provide technical leadership on complex electrical engineering problems.\n Serve as a senior technical authority for electrical design decisions and engineering recommendations.\n \n Automotive & Vehicle Electrical Systems\n Provide advanced electrical engineering support for vehicle and mobile-equipment platforms, including:\n \n Autonomous and advanced vehicles (AV)\n Electric vehicles and battery-powered platforms\n Stock chasers\n Utility and commercial vehicles\n Specialty vehicles\n Trailers and trailer electrical systems\n Other engineered vehicles/products\n \n Responsibilities include:\n \n Develop and improve vehicle electrical architecture.\n Design and troubleshoot vehicle wiring and harness systems.\n Support power distribution and electrical protection systems.\n Integrate batteries, chargers, motors, controllers, sensors, switches, displays, lighting, and other electrical components.\n Diagnose vehicle electrical failures and intermittent problems.\n Support electrical system validation and durability testing.\n Work with mechanical engineering to ensure proper integration of electrical components.\n Investigate field and production failures and develop permanent engineering solutions.\n \n Quality, Troubleshooting & Diagnostics\n A major responsibility of this position is advanced troubleshooting and resolution of quality issues.\n The engineer will:\n \n Investigate complex electrical and electromechanical quality problems.\n Diagnose failures occurring during manufacturing, testing, commissioning, and field operation.\n Identify recurring electrical defects and determine their root causes.\n Perform structured root-cause analysis using engineering data, testing, diagnostics, and physical inspection.\n Distinguish between design-related, manufacturing-related, component-related, installation-related, and supplier-related failures.\n Develop and implement corrective and preventive actions.\n Validate corrective actions to ensure problems do not recur.\n Work directly with Quality and Manufacturing teams to resolve nonconformances.\n Analyze warranty, field-service, production, and quality data to identify recurring failure patterns.\n Establish diagnostic procedures and troubleshooting methodologies.\n Develop technical solutions that improve product reliability and reduce defects.\n Participate in formal quality investigations and corrective-action processes.\n Provide engineering recommendations when product or process quality does not meet established requirements.\n \n Engineering Improvements & Continuous Improvement\n The Advanced Senior Electrical Engineer will be expected to continuously identify opportunities to improve Wesley International's products, processes, and engineering practices.\n Responsibilities include:\n \n Identify opportunities to improve electrical system reliability, performance, safety, and manufacturability.\n Redesign components or systems where existing designs create quality or production problems.\n Develop engineering modifications to address recurring failures.\n Reduce electrical defects, rework, scrap, warranty issues, and production interruptions.\n Improve wiring, harnesses, connectors, electrical components, controls, and system interfaces.\n Evaluate alternative components and technologies to improve performance or reduce cost.\n Lead engineering improvement projects from problem identification through implementation and validation.\n Analyze production and field data to identify improvement opportunities.\n Implement design-for-manufacturing and design-for-quality improvements.\n Establish lessons learned and incorporate them into future product designs.\n Support Lean, continuous improvement, and structured problem-solving initiatives.\n \n Manufacturing Engineering Support\n \n Work directly with manufacturing and production personnel to resolve electrical issues.\n Provide immediate technical support for complex production problems.\n Diagnose problems occurring during assembly, testing, and final inspection.\n Determine whether failures originate from design, components, assembly, wiring, programming, testing, or process variation.\n Develop practical engineering solutions that can be consistently implemented in production.\n Support production launches and new product introductions.\n Review manufacturing processes for opportunities to improve electrical quality and reliability.\n Develop or improve electrical inspection and testing procedures.\n Support test equipment and diagnostic-system development.\n Work with technicians and manufacturing personnel to establish effective troubleshooting procedures.\n Provide technical training and guidance to manufacturing and maintenance personnel when required.\n \n Advanced Diagnostics & Failure Analysis\n \n Use electrical test equipment and diagnostic tools to isolate complex system failures.\n Troubleshoot intermittent, difficult-to-reproduce, and multi-system failures.\n Analyze electrical measurements, test results, system behavior, and failure patterns.\n Perform component-level and system-level failure analysis.\n Develop diagnostic procedures for production and service teams.\n Investigate failures under varying load, environmental, and operating conditions.\n Verify suspected failure modes through controlled testing.\n Document findings and communicate technical conclusions to engineering and management.\n Ensure corrective actions are technically validated before implementation.\n \n Product Development & Validation\n \n Lead electrical engineering activities from concept through production.\n Establish electrical design requirements and performance specifications.\n Develop prototypes and support prototype builds.\n Create engineering test plans and validation procedures.\n Conduct design verification and system-level testing.\n Analyze test results and identify necessary design improvements.\n Support reliability, durability, environmental, and performance testing.\n Validate engineering changes before production implementation.\n Support product launches and production ramp-up.\n Ensure electrical designs meet applicable engineering, safety, quality, and customer requirements.\n \n Engineering Documentation & Change Control\n \n Create and maintain electrical schematics, wiring diagrams, harness documentation, bills of materials, specifications, and engineering drawings.\n Maintain accurate and revision-controlled engineering documentation.\n Prepare and manage Engineering Change Orders (ECOs) and Engineering Change Requests (ECRs).\n Document engineering investigations, test results, corrective actions, and design improvements.\n Ensure production documentation accurately reflects approved engineering configurations.\n Maintain component specifications and approved engineering standards.\n \n Cross-Functional Technical Leadership\n The Advanced Senior Electrical Engineer will work closely with:\n \n Mechanical Engineering\n Manufacturing Engineering\n Quality\n Production\n Product Development\n Purchasing\n Sales\n Suppliers and manufacturing partners\n Senior Leadership\n \n The engineer must be able to translate complex technical problems into clear recommendations and practical solutions for both technical and non-technical stakeholders.\n Advanced Senior Engineering Expectations\n This position requires an engineer who can operate with a high degree of independence and technical judgment.\n The successful candidate will be expected to:\n \n Take ownership of complex engineering problems from identification through resolution.\n Lead technical investigations without requiring continuous supervision.\n Identify the root cause rather than simply treating symptoms.\n Develop permanent corrective solutions for recurring problems.\n Make technically sound recommendations based on data and engineering analysis.\n Challenge existing designs and processes when improvement opportunities are identified.\n Mentor engineers, technicians, and other technical personnel.\n Provide advanced technical training where appropriate.\n Lead cross-functional problem-solving activities.\n Communicate technical risks and recommendations clearly to leadership.\n Balance engineering performance, quality, manufacturability, reliability, cost, and schedule.\n \n Required Qualifications\n \n Bachelor's degree in Electrical Engineering or closely related engineering discipline.\n Extensive professional experience in electrical engineering.\n Significant experience working in a manufacturing environment.\n Advanced experience in electrical system design, troubleshooting, diagnostics, and failure analysis.\n Demonstrated experience resolving complex quality and production issues.\n Strong understanding of electrical power distribution, controls, wiring, sensors, motors, batteries, relays, contactors, and electrical components.\n Ability to read, develop, and troubleshoot electrical schematics and wiring diagrams.\n Strong analytical and root-cause-analysis skills.\n Demonstrated ability to lead engineering improvement initiatives.\n Strong written, verbal, and technical communication skills.\n \n Highly Preferred Experience\n \n 8+ years of progressive electrical engineering experience.\n Advanced experience in automotive or specialty vehicle electrical engineering.\n Experience with AV/autonomous vehicles.\n Experience with electric vehicles and battery-powered systems.\n Experience with rickshaws, stock chasers, utility vehicles, trailers, or similar vehicle platforms.\n Experience with vehicle wiring harnesses and electrical architecture.\n Experience with motors, motor controllers, batteries, chargers, sensors, actuators, and vehicle control systems.\n Experience resolving manufacturing quality issues.\n Experience with failure analysis and corrective/preventive action systems.\n Experience leading continuous improvement projects.\n Experience working directly with production and manufacturing personnel.\n Experience developing diagnostic procedures and technical training.\n Experience taking products from prototype through production.\n \n Preferred Technical Knowledge\n \n Electrical system architecture\n Vehicle electrical systems\n Wiring-harness design\n Power distribution\n Battery and charging systems\n Electric vehicle systems\n Motors and motor controllers\n Sensors and instrumentation\n Relays and contactors\n Vehicle controls\n CAN bus and vehicle communication systems\n PLCs and industrial controls\n Electrical diagnostic equipment\n Electrical safety systems\n Engineering change management\n Quality systems\n Root-cause analysis\n Corrective and preventive action\n Lean Manufacturing / Continuous Improvement\n Design for Manufacturing\n Design for Quality\n \n Education & Experience\n Minimum Requirements:\n \n Bachelor's degree in Electrical Engineering or related field.\n Significant professional electrical engineering experience.\n Manufacturing experience.\n Demonstrated advanced troubleshooting and diagnostic experience.\n \n Preferred:\n \n 8+ years of electrical engineering experience.\n Automotive or specialty vehicle engineering experience.\n Vehicle electrical systems experience.\n Advanced experience in quality improvement and failure analysis.\n Experience leading complex engineering projects and technical investigations.\n \n Equivalent combinations of education, specialized training, and directly relevant professional experience may be considered for exceptionally qualified candidates.\n Key Performance Measures\n Success in this role will be demonstrated through the engineer's ability to:\n \n Reduce recurring electrical and electromechanical quality problems.\n Improve product reliability and electrical system performance.\n Resolve complex manufacturing and field failures.\n Reduce electrical defects, rework, scrap, and warranty-related issues.\n Successfully implement engineering improvements.\n Improve diagnostic and troubleshooting capabilities.\n Support successful product launches and production transitions.\n Develop reliable, manufacturable, and serviceable electrical designs.\n Provide advanced technical leadership to engineering and manufacturing teams.\n Deliver measurable improvements in quality, reliability, cost, and production performance.\n \n Work Environment\n This position requires a combination of engineering-office, laboratory, manufacturing, production, and hands-on testing activities.\n The engineer must be comfortable working directly with vehicles, prototypes, electrical systems, manufacturing equipment, production lines, test equipment, and engineering components.\n The position requires an individual who is willing and able to investigate problems physically, perform diagnostics and testing, work alongside technicians and production personnel, and remain engaged until the technical issue has been fully resolved.\n Equal

Job Description Do you like working with different project teams in a fast-paced environment? Are you interested in joining an organization focused on making a positive impact? If so, we'd like to talk with you about growing with us. We are seeking a full-time Industrial Wastewater Engineer to join EnSafe's team of professionals at one of our U.S. office locations. In this role, you'll partner with multidisciplinary teams to deliver innovative industrial wastewater and water treatment solutions for a diverse client base while expanding your technical expertise and growing your career within an employee-owned consulting firm. Joining our team means immersing yourself in an environment that nurtures creativity, encourages collaboration at all levels, fosters a supportive culture, and facilitates professional development. Key responsibilities of this position include: • Technical strength with industrial wastewater (IWW) treatment and design engineering across a variety of industries., • Support or lead design of IWW collection, conveyance, and treatment projects., • Manage design-build and construction services., • Manage equipment selection and procurement, manage construction phase engineering services, and participate in design and construction meetings with clients, subcontractors, and regulators., • Lead technical teams working across multiple offices to:, • develop treatment options and cost estimates,, • prepare plans and specifications, including PFDs, P&IDs, and layouts, and, • write work plans, design reports, SOPs, O&M manuals, and other documentation., • Provide inspection/troubleshooting support for existing IWW systems and identify enhancements., • Design and implement bench-scale and pilot-scale treatability studies, including data management and evaluation, mass balance/loading details, and treatment technology selection., • Participate in meetings with subcontractors, clients, and regulators., • Provide marketing/sales efforts, as well as proposal development. Minimum Skill and Requirements: • Bachelor's degree from an ABET-accredited college in Civil, Environmental, Mechanical, or Chemical Engineering (Master's degree in pertinent discipline preferred)., • 8-15 years of industrial wastewater design experience, with several years as a professional-in-responsible-charge., • Professional Engineer registration/License in FL, TX, TN, or other states., • Proficient in the use of Microsoft Excel, Outlook, and Word, along with graphics software/AutoCAD, necessary for the conceptual design of industrial wastewater systems., • Previous experience with instrumentation and controls/automation is a plus., • Highly effective interpersonal and communication skills when interacting with others, expressing intricate ideas effectively and professionally to an engineering and non-engineering audience., • Strong self-leadership and interpersonal communication skills with the ability to interact with clients, regulators, project managers, and employees effectively, persuasively, and tactfully at all levels of the organization., • Strong work ethic, attention to detail., • 30% travel potential., • Valid driver's license to operate a vehicle in the U.S. Why Join EnSafe? • Employee-Owned Advantage EnSafe is 100% employee-owned, with an ESOP (Employee Stock Ownership Plan) since 1997. That means when EnSafe succeeds, you succeed too, turning company growth directly into shared rewards. • Commitment to Growth and Wellness The company supports personalized career development, mentorship, and employee wellness initiatives such as health tracking tools. • Purpose‑Driven Work EnSafe's mission focuses on impactful environmental, health, and safety consulting—making a real difference in communities and is backed by its long-standing technical credibility. • Safety as a Value, Not Just a Service Safety is deeply embedded in our culture, prioritizing employee well-being in addition to helping clients maintain compliance. We stress that "safety is part of everything we do." • A Culture of Freedom & Ownership At EnSafe, our career philosophy is built on freedom. The freedom to take initiative, achieve your goals, and shape your own career path Employees are encouraged to pursue growth in a flexible, entrepreneurial environment. • Challenging, Creative Work Workdays at EnSafe are anything but ordinary, fast-paced, dynamic, and filled with opportunities to tackle projects in environmental consulting, health & safety, engineering, and technology. Every day calls for creativity, innovation, and agile problem-solving. #LI-MJ1 About EnSafe EnSafe began as a two-person firm in 1980, navigating complex regulatory compliance issues on behalf of our clients. We nurture our people with growth and development opportunities. We build enduring, trustful relationships with each of our clients, with a focus on high ethical and safety standards. We build this reputation by attracting high-quality people and retaining them for the long term. At EnSafe, we are dedicated to fostering a diverse and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles at our company. EnSafe is committed to being an EEO employer and all qualified candidates will receive consideration without regard to race, color, religion, national origin, citizenship, age (except for bona fide occupational qualifications), sex, disability, sexual orientation, gender identity, marital status, military or veteran status, any other status protected by federal, state, or local law, or association with a person on the basis on one or more of the foregoing. Check us out on the web at www.ensafe.com Applicant Privacy Notice | AI use in Hiring

Job Description Canonical is a leading provider of open source software and operating systems to the global enterprise and technology markets. Our platform, Ubuntu, is widely used in breakthrough enterprise initiatives such as public cloud, data science, AI, engineering innovation, and IoT. Our customers include the world's leading public cloud and silicon providers, and industry leaders in many sectors. The company is a pioneer of globally distributed collaboration, with 1200+ colleagues in 75+ countries and very few office-based roles. Teams meet two to four times yearly in person, in interesting locations around the world, to align on strategy and execution. The company is founder-led, profitable, and growing. We are hiring a Site Reliability Engineer Our goal is to perfect enterprise infrastructure DevOps practices, raising the bar on what's possible with automation by embracing a model-driven approach, whether on-premise or on public clouds. We run hundreds of private cloud, Kubernetes clusters, and applications for customers across both physical and public cloud estates. We identify and address incidents, monitor and observe applications, anticipate potential issues, and enable product refinement to ultimately achieve high-quality standards in our open source portfolio. To succeed in this role, you need to have a strong background in Linux, Python, networking, and knowledge of how clouds work. Your work will encompass the entire stack, from bare-metal networking and kernel up to Kubernetes and open source applications. You can expect to be trained in our core technologies like OpenStack, Kubernetes, security standards, open source products like Kubeflow, Kafka, OpenSearch, databases, and many others. Automation for us is a software engineering problem that we approach with a scientific mindset to bring operations at scale, driven by metrics and code. Location: Globally remote role The role We deploy and run OpenStack, Kubernetes, storage solutions, and open source applications, applying DevOps practices. To become a member of our team, you need to be a software engineer fluent in Python, you need a genuine interest in the full open source infrastructure stack from bare metal to containers, and you need the ability to work in operations with mission-critical services for global brand-name customers. As a member of the team, you will gain experience in a broad range of cloud technologies. We evolve our offerings as the state of the art improves, so you get to stay current with the latest capabilities in open source infrastructure. What we are looking for in you • Degree in software engineering or computer science, • Python software development experience, • Operational experience in Linux environments, • Experience with Kubernetes deployment or operations, • Excellent interpersonal skills, curiosity, flexibility, and accountability, • Ability to travel internationally twice a year, for company events up to two weeks longBonus skills, • Familiarity with OpenStack deployment or operations, • Familiarity with public cloud deployment or operations, • Familiarity with private cloud managementWhat we offer colleagues We consider geographical location, experience, and performance in shaping compensation worldwide. We adjust compensation every 6 months to ensure we recognize outstanding performance, and in addition to base pay, we offer annual bonuses. We provide all team members with additional benefits, which reflect our values and ideals. We balance our programs to meet local needs and ensure fairness globally. • Distributed work environment with twice-yearly team sprints in person, • Personal learning and development budget of USD 2,000 per year, • Every 6 months compensation review, • Recognition rewards, • Annual holiday leave, • Maternity and paternity leave, • Employee Assistance Programs, • Opportunity to travel to new locations to meet your colleagues, • Priority Pass and travel upgrades for long-haul company eventsAbout Canonical Canonical is a pioneering tech firm at the forefront of the global move to open source. As the company that publishes Ubuntu, one of the most important open source projects and the platform for AI, IoT, and the cloud, we are changing the world of software. We recruit on a global basis and set a very high standard for people joining the company. We expect excellence - in order to succeed, we need to be the best at what we do. Most colleagues at Canonical have worked from home since its inception in 2004. Working here is a step into the future, and will challenge you to think differently, work smarter, learn new skills, and raise your game. Canonical is an equal opportunity employer We are proud to foster a workplace free from discrimination. Diversity of experience, perspectives, and background creates a better work environment and better products. Whatever your identity, we will give your application fair consideration. #LI-Remote

Job DescriptionDescription: Why Bevara: Named “Top Places to Work” and one of the “Fastest Growing Companies”, Bevara focuses on empowering our team members with the tools and support they need to reach their professional aspirations. We foster a vibrant, interactive team culture that values collaboration. We promote a healthy work-life balance and pride ourselves on working hard while also enjoying our time together! Be apart of something big and join our team! About the Position: The Lead Building Engineer is responsible for overseeing the day-to-day operation, maintenance, and repair of building systems, while leading and mentoring the engineering team in Atlanta, GA. Reporting to the Regional Engineering Manager, this role combines hands-on technical expertise with strong leadership responsibilities, ensuring the facility operates safely, efficiently, and in compliance with all applicable standards. Typical Hours: 1st shift What you’ll be doing: • Lead and conduct preventative maintenance and repairs to the mechanical, industrial, plumbing, structural, life safety, and control systems for the facility to keep facility and building systems up to applicable standards as assigned., • Provide mentorship, training, and guidance to other building engineers, fostering professional growth and technical excellence., • Provide performance feedback, assist with evaluations, and support staffing decisions in coordination with the Chief Engineer and/or Regional Engineering Manager., • Assign, oversee, and review work orders to ensure timely and accurate completion by engineering staff., • Manage, maintain, and adjust building automation systems (BAS/EMS) for energy efficiency and occupant comfort, per industry standard guidelines., • Troubleshoot, repair, and replace electrical components including but not limited to ballasts, outlets, switches, fixtures, and occasional breakers and plumbing fixtures (toilets, urinals, sinks, valves, faucets)., • Conduct fire/life safety inspections including fire panels, pumps, extinguishers, alarms, sprinklers, and emergency lighting systems., • Implement, monitor, and optimize preventive maintenance programs across the portfolio to extend equipment life and minimize downtime., • Oversee and perform general building repairs including painting, ceiling tiles, doors, locks, lighting, flooring, and basic carpentry work., • Direct and inspect the work of outside vendors and contractors for adherence to building standards, safety protocols, and quality expectations., • Respond promptly to service requests and emergencies which may be after hours (e.g., leaks, HVAC outages, electrical failures, fire alarms)., • Maintain accurate documentation of maintenance activities, inspections, and vendor work through CMMS or work order systems., • Supports and oversees capital improvement and tenant enhancement projects, including scope development, budgeting, vendor coordination, and ensuring projects are completed safely, on time, and within specifications, • Ensure compliance with safety policies and procedures, while promoting a culture of accountability., • Maintain a professional demeanor consistent with company values while providing excellent client services., • Performs other duties as assigned.Requirements:, • 3-5 years of progressive experience in commercial building or facilities operations, including at least 2 years in a supervisory or managerial role overseeing multi-site operations, capital projects, and cross-functional engineering teams., • Demonstrated ability to lead, coach, and develop engineering staff, including delegating tasks, providing feedback, and holding team members accountable., • Professional communication skills, including the ability to explain technical issues clearly to non-technical stakeholders and document work accurately., • Ability to resolve conflicts, maintain professionalism under pressure, and foster a positive team environment., • Prior experience with Class A commercial offices, medical offices, or other commercial properties., • Strong working knowledge of building systems, including chillers, boilers, pumps, cooling towers, air handlers, and BAS., • High School Diploma or GED required; trade school, technical certification, or apprentice program preferred., • Basic computer proficiency (Microsoft Office, Outlook, CMMS/work order systems, smartphone/tablet apps)., • Valid state driver’s license and reliable transportation required; willingness to travel between properties as needed., • Ability to work in varying environments (mechanical rooms, rooftops, outdoors, extreme temperatures, inclement weather)., • Comfortable using hand tools, power tools, ladders, lifts, and rigging equipment., • Extended periods of standing and walking across large properties. Pre-Employment Requirements: Offers of employment are contingent upon successful completion of the following: • Drug screening, • Background check, • Physical examination Benefits and Perks • Salary increases twice per year., • Comprehensive health benefits for employees and their families., • 401(k) retirement plans, • Paid Time Off (PTO) and holidays., • Company-provided life insurance., • Educational assistance., • Free on-site parking., • Company cell phone and uniforms plus annual uniform allowance., • Mileage reimbursement (When applicable)., • Company credit card for work related supplies., • Internal advancement opportunities Bevara Building Services provides equal employment to all persons. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law.

Job Description Exotec designs and delivers advanced automation solutions that help global brands optimize warehouse performance while supporting warehouse teams across every level. Our organization combines elegant mechanical design, resilient software and a deep understanding of logistics operations to solve our clients' most complex challenges. Joining Exotec means contributing to an international company where people and purpose guide the way we work. Our teams collaborate with clarity, challenge ideas and share a collective commitment to engineering solutions that matter. We value the diversity of more than 1,000 ExoPeople who bring their expertise, perspective and experience to our shared vision. Here your work has a visible impact, from the way we work to the reliability we commit to deliver. You will join a place where collaboration, excellence, and meaningful impact guide how we build what comes next. What You'll Do As a Solutions Design Engineer, you will help clients solve complex warehouse and order fulfillment challenges through automation, robotics, software, and material handling systems. Working closely with Sales, Business Development, Deployment Engineering, and Project Delivery teams, you will design scalable solutions that improve throughput, storage density, labor efficiency, and operational performance across distribution and fulfillment operations. • Partner with Sales and Business Development teams to evaluate opportunities and develop solution strategies., • Lead client discovery activities, including site visits, operational assessments, workshops, and requirements gathering sessions., • Analyze warehouse and fulfillment data to identify automation opportunities and operational improvements., • Design end-to-end solutions incorporating robotics, storage systems, conveyors, sortation equipment, software, and other material handling technologies., • Develop system layouts, technical concepts, and solution proposals aligned with client business objectives., • Create and deliver customer presentations that clearly communicate both technical solutions and operational value., • Collaborate with cross-functional teams to validate, refine, and deliver innovative warehouse automation solutions., • Support projects throughout the sales cycle, from qualification and solution development through contract award and project handover., • Prepare technical documentation and handover packages to support successful project execution., • Stay informed on emerging technologies, market trends, and best practices across warehouse automation, intralogistics, material handling, and order fulfillment operations. Requirements We strongly encourage applications from candidates of all genders to help us build a truly inclusive environment. If you don't meet every requirement listed below, don't worry, your skills and experiences may still make you a great fit! • 3-5 years of experience in warehouse automation, material handling, intralogistics, fulfillment operations, systems integration, or a related solutions engineering environment., • Experience working with distribution centers, fulfillment centers, warehouse operations, or material handling systems., • Bachelor's degree in Engineering, Industrial Engineering, Systems Engineering, Supply Chain, Logistics, or a related technical field., • Experience creating technical concepts, facility layouts, or solution designs using AutoCAD or similar tools., • Strong communication and presentation skills, with the ability to collaborate effectively across technical and commercial teams., • Ability to manage multiple priorities in a fast-paced environment and deliver high-quality work within deadlines., • Willingness to travel up to 20% to support customer engagements and site visits., • Nice to have: Ability to analyze operational data and translate customer requirements into practical, scalable technical solutions using SQL, Python, and/or AI tools. Benefits • Competitive compensation package, including base salary and bonus., • Comprehensive medical, dental, and vision coverage., • Generous vacation and time-off policy., • 401(k) with company match up to 5%., • Continuous opportunities for training, development, and career growth within a rapidly growing international company., • Opportunity to work on some of the largest and most complex warehouse automation projects in North America., • Exposure to Fortune 500 and global enterprise customers., • Opportunity to collaborate with teams across North America and Europe., • Beautiful, new office space in Midtown Atlanta.

Job DescriptionPosition Overview The Engineer I position is designed for entry-level to early-career engineers with 0–5 years of related experience and an accredited Bachelor's degree in Mechanical Engineering, Civil Engineering, or a related engineering discipline. This role supports the design, construction, operation, and maintenance of power-related systems while developing foundational engineering and project execution skills. Key Responsibilities • Apply engineering principles, design criteria, and software applications to support the design and construction of power-related systems., • Assist in the preparation of project estimates and development of engineering design options., • Prepare construction specifications and engineering documentation., • Provide guidance, oversight, and quality assurance reviews of contractor-developed design solutions, cost estimates, and construction packages., • Support the planning, design, operation, construction, and maintenance of utility infrastructure and related systems., • Assist with the development and implementation of engineering standards and design criteria., • Support construction and maintenance teams during project execution and daily operations., • Estimate project materials and assist with procurement planning., • Prepare, review, and transmit construction packages and supporting documentation., • Ensure compliance with company, industry, and regulatory engineering standards., • Promote a strong safety culture by prioritizing safe work practices in all activities.Required Knowledge & SkillsTechnical Skills, • Basic understanding of engineering principles and practices., • Familiarity with engineering design processes and methodologies., • Knowledge of engineering software applications and tools., • Understanding of industry standards and utility engineering practices., • Ability to interpret technical drawings, specifications, and construction documents., • Basic estimating and project support capabilities.Professional Skills, • Strong analytical and problem-solving abilities., • Ability to make routine decisions using established procedures and guidance from supervisors., • Strong organizational and time management skills., • Effective verbal and written communication skills., • Positive attitude and strong work ethic., • Ability to collaborate effectively with engineering teams, plant personnel, contractors, and vendors.Qualifications, • Bachelor's Degree in Mechanical Engineering, Civil Engineering, or a related engineering field from an accredited institution., • 0–5 years of engineering or related industry experience., • Internship, co-op, or utility/power industry experience is preferred but not required.Core Competencies, • Safety First Mindset, • Engineering Fundamentals, • Problem Solving & Analysis, • Attention to Detail, • Team Collaboration, • Continuous Learning, • Customer & Stakeholder Focus, • Technical Documentation & Quality Assurance This position offers an excellent opportunity for engineers seeking to develop their technical expertise and gain hands-on experience supporting utility and power system projects throughout their lifecycle.

Job Description TO APPLY GO TO WWW.GMGCPM.COM/CAREERS We are seeking to hire a Field Inspector II! JOB DESCRIPTION Both Field Inspector I and II roles share core responsibilities including monitoring construction to ensure quality materials and workmanship align with contract documents, preparing daily records of work and site conditions, conducting inspections, reporting quality and safety issues, updating contract documents with field changes, assisting with quality control plans, verifying quantities for payments, and ensuring transit safety oversight. SPECIAL REQUIREMENT • Accurately verify quantities for progress payments to ensure that completed work meets contractual obligations and project timelines. • Report any safety concerns or deviations from the project schedule to the Project Safety Engineer and the Resident Engineer, enabling timely resolutions and maintaining project integrity. • Experience in inspecting roadway construction and public utility relocation (Summerhill BRT Project). • Experience in inspecting electrical distribution, equipment installation, and testing (Automatic Fare Collection 2.0 Project). • Familiarity with building codes as required by the client. RESPONSIBILITIES Field Inspector II: Key Responsibilities As a Field Inspector II, you will take on more complex assignments, manage multiple projects simultaneously, and may specialize in a specific area of expertise (e.g., architectural, mechanical, electrical, civil, structural, or rail). • Independent Project Management: Manage the inspection of several major projects simultaneously, ensuring all contractors comply with applicable building codes, regulations, and contract specifications. • Mentorship Training: Mentor and/or train lower-level inspection staff, contributing to team development and standard best practices. • Quality Control Plan Implementation: Assist with the development and implementation of project quality control plans, recommending and implementing corrective/preventive actions for deficiencies. • Technical Review Collaboration: Work closely with the Resident Engineer and Office Engineer to understand technical data and assist with the technical review of project submittals and Requests for Information (RFIs). • Problem Solving: Investigate construction problems encountered in the field and recommend solutions or corrections to achieve final project acceptance. • Regulatory Expertise: Ensure regulatory compliance with applicable federal, state, and local standards. \nCompany Description Do you want to work in a company where people truly believe in what they’re doing. At GMG, we’re committed to bringing passion and client focus to each of our engagements. Our team members get to work on some of the prominent and most impactful projects around. We work hard, and we’re serious about what we do. But we like to have fun too. If you like working with happy, enthusiastic achievers, you’ll enjoy GMG. We know that happy employees are engaged employees. Send us your resume or apply for one of our posted positions below! Do you want to work in a company where people truly believe in what they’re doing. At GMG, we’re committed to bringing passion and client focus to each of our engagements. Our team members get to work on some of the prominent and most impactful projects around. \r\n\r\nWe work hard, and we’re serious about what we do. But we like to have fun too. If you like working with happy, enthusiastic achievers, you’ll enjoy GMG. We know that happy employees are engaged employees. Send us your resume or apply for one of our posted positions below!

Job Description About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $8.1 billion in revenue for 2025, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for mission critical, industrial, life sciences, power & energy, aviation, commercial, institutional, residential and sports & entertainment related building projects. About Clayco Systems and Equipment Innovations (SEI) As part of our integrated service offerings, Clayco's Systems and Equipment Innovations (SEI) offers a turnkey solution to execute complex building systems and process systems. Clayco SEI provides preconstruction, design, purchasing, and installation of mechanical, electrical, and process scopes of work. The Role We Want You For As a Project Engineer with SEI, you will be based on a construction project site. In this role you will use your education and knowledge to support the Project Manager by providing technical support, documenting, and reporting project activities and meetings. The work to be performed may consist of various scopes including structural, mechanical, electrical, and other trades related to building and process systems on highly complex projects nationwide., construction, start up, and testing on highly complex projects nationwide. These responsibilities will cover the full life cycle of the project including planning, construction, start up, testing, commissioning, and turnover. All these functions will have a specific focus relative to self-perform execution of respective scopes of work. The Specifics of the Role • Build client and subcontractor relationships., • Team with Architects, Engineers, and Planners to create and manage a design schedule., • Assist in the planning process., • Assist in the establishment of project forecasts and budgets., • Assists in the reporting of project status and cost., • Accept responsibility for project execution., • Mentor and develop Interns and new incoming project management staff., • Review PO's & Negotiate Terms., • Receive, examine, and evaluate contractor quotes for changes., • Negotiate project and change costs., • Expedite Materials/Equipment., • Setup Equipment Status Tracking., • Setup Material Tracking., • Expedite deliveries to meet schedule., • Assist in managing Design Trades., • Oversee Accountability for schedule/coordination/document control., • Contract management for installation subcontractors., • Cost control for equipment, materials, and installation., • Schedule management/input for process scopes., • Input progress/productivity updates in tracking systems and provide data output to the team for use in management of project execution., • Participate in cost review meetings and regularly update cost tracking systems., • Assist superintendents with punch list tracking, capturing safety observations, and taking progress photos while walking the job., • Assist with site logistics preparation and maintenance., • May be involved with the preparation, monitoring, and distribution of RFIs and submittals., • Responsible for documenting meeting minutes., • Manage drawings, project closeouts, and turnovers., • Observe field activities to assist with the schedule., • Facilitate productivity reporting for self-performed trades and owner billings. Requirements • Bachelor's Degree in Construction Management, Engineering, Architecture, or related degree preferred., • 0 to 5 years of experience managing construction projects, ideally design-build., • Demonstrated knowledge of construction principles, practices, and technology., • Previous experience on a successful project management team., • Ability to walk a job site, climb ladders, and scale multi-floor scaffolding., • Ability to lift objects of at least 50 lbs., • General knowledge of the construction industry. Some Things You Should Know • Our clients and projects are nationwide – Travel will be required., • No other builder can offer the collaborative design-build approach that Clayco and SEI does., • We work on creative, complex, award-winning, high-profile jobs., • The pace is fast!, • This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco and SEI? • 2025 Best Places to Work – St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2025 ENR Top 400 – Top Data Center Contractor (Top 3)., • 2025 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • 2025 ENR Top 100 Green Contractors – Green Contractor (Top 3). Benefits • Discretionary Annual Bonus: Subject to company and individual performance., • Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Job Description Position Summary The Construction Project Engineer supports the Project Manager and project team in the planning, coordination, documentation, and execution of construction projects. This role serves as a critical link between field operations, design consultants, contractors, and owners—ensuring that project documentation, schedules, budgets, and quality standards are maintained throughout the project lifecycle. The ideal candidate is detail-oriented, technically proficient, and eager to grow into a Project Manager role. Key Responsibilities Project Coordination & Administration • Assist in managing daily project activities, ensuring alignment with contract documents, schedules, and budgets, • Support the preparation and tracking of project schedules, work plans, and milestone deliverables, • Coordinate with subcontractors, consultants, inspectors, and internal stakeholders Document Control & Technical Review • Manage and track submittals, RFIs, shop drawings, and change requests, • Review construction documents for constructability, completeness, and coordination issues, • Maintain accurate and up-to-date project records, logs, and reports Cost & Change Management • Assist in evaluating change orders, pricing proposals, and budget impacts, • Track project costs, commitments, and contingency usage, • Support monthly pay application reviews and progress verification Field & Site Support • Participate in site visits, inspections, and progress meetings, • Assist with issue resolution related to field conditions, design clarifications, and schedule impacts, • Support quality control and safety compliance efforts Communication & Reporting • Prepare meeting agendas, minutes, and action item logs, • Develop weekly and monthly project status reports, • Facilitate clear communication between field teams, management, and clients Qualifications Education • Bachelor’s degree in Construction Management, Civil Engineering, Architecture, or a related field (required) Experience • 1–5 years of experience in construction project support, engineering, or coordination, • Exposure to commercial, institutional, K-12, healthcare, municipal, or multi-family construction preferred Technical Skills • Proficiency in construction technology platforms such as Procore, Bluebeam, Primavera P6, Microsoft Project, and MS Office Suite, • Ability to read and interpret construction drawings, specifications, and contracts Core Competencies • Strong organizational and time-management skills, • Excellent written and verbal communication abilities, • Analytical mindset with attention to detail, • Ability to manage multiple tasks in a fast-paced environment Preferred Qualifications • Experience working on publicly funded or bond-funded projects (e.g., K-12, higher education, municipal), • Familiarity with change order management, pay applications, and procurement processes, • OSHA 10 or OSHA 30 certification Career Development Opportunity This role is designed as a growth position with a defined pathway toward Project Manager or Senior Project Engineer, based on performance, leadership, and project complexity. Work Environment • Combination of office and active construction site environments, • Occasional travel to project sites as required Equal Opportunity Statement Johnson Construction Services is an Equal Opportunity Employer and values diversity in the workplace. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, disability, or veteran status.

Job Description About Stratus Stratus® is an integrated, multi-disciplinary engineering, architecture, interior design, and consulting firm. Consistently ranking among the Top 500 Design Firms in Engineering News-Record, the firm offers a deep bench of industry experts through a highly collaborative approach, delivering innovative solutions across the full project lifecycle. Operating coast to coast, Stratus® serves clients nationwide while maintaining a strategic commitment to supporting high-growth economies and building vibrant communities that foster the professional growth of its team. Serving public- and private-sector clients, the firm is dedicated to delivering the highest-quality service wherever projects take shape. Across the Civic, Commercial, Industrial, Transportation, Education, Water Resources, and Government sectors, we bring precision, insight, and purpose to every project, from targeted renovations to large-scale infrastructure. Stratus® designs spaces, systems, and solutions that perform, endure, and make an impact, delivering on our promise of Better Plans. Better Places. The Role Our Senior Electrical Engineer II (PE) is responsible for providing expert-level technical leadership on complex engineering projects in the commercial industry. This role involves overseeing the design, analysis, and construction phases of projects, ensuring compliance with regulatory standards and client requirements. They will serve as a technical leader, guiding project teams and ensuring the accuracy, quality, and efficiency of engineering deliverables. Responsibilities: • Lead the design and technical development of engineering projects, providing expert guidance to project teams and ensuring compliance with industry standards., • Prepare detailed engineering drawings, calculations, and specifications, ensuring that designs meet project requirements, regulatory standards, and client expectations., • Oversee the integration of building systems, ensuring that civil, mechanical, electrical, structural, and environmental systems are aligned and work cohesively within the overall design., • Provide technical oversight during the construction phase, reviewing submittals, conducting site visits, and addressing technical issues that arise during construction., • Mentor and provide technical leadership to junior engineers, helping them to develop their technical skills and knowledge., • Conduct quality control reviews at key project milestones to ensure that designs meet both internal and client standards for accuracy, technical precision, and regulatory compliance., • Collaborate with multidisciplinary teams, including architects, contractors, and consultants, to ensure seamless coordination across all project phases., • Participate in client meetings and presentations, providing technical expertise and ensuring that client expectations are met., • Manage project schedules, budgets, and resources, ensuring that project milestones are met on time and within budget., • Stay current with industry advancements, emerging technologies, and materials, incorporating innovative solutions into project designs when applicable., • Perform all other duties as assigned., • Work collaboratively and effectively with clients and colleagues including cross-functional teams, peers, direct reports, and leadership, fostering a positive and inclusive work environment., • Adapt to changing business needs and priorities, demonstrating flexibility in taking on new responsibilities and adjusting to evolving challenges. Qualifications: Required • Licensed Professional Engineer (PE)., • Bachelor’s or Master’s degree in engineering from ABET-accredited university., • 10 - 15 years of experience in engineering design and project management., • Prior experience with MEP and Fire Prevention systems in the commercial sector Preferred • Experience leading large or complex engineering projects. Why you’ll love Stratus • A team-oriented environment that values transparency, creativity, and shared success, • Meaningful career paths, leadership opportunities, and space to specialize, • Learning & Development – Education and Professional Licensing, • We believe flexible, hybrid work supports the balance and well-being our team deserves, • Excellent Health Care Programs – Medical, Dental, and Vision Insurance, • Company-paid Life Insurance, Short-Term Disability, and Long-Term Disability, • Voluntary Life Insurance options for employees, spouses, and dependents, • 401k Retirement Plan with employer match, • Paid Holidays & Competitive PTO plans Interested in learning more about Stratus, please visit https://www.stratusteam.com/. Equal Opportunity Statement Stratus is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, pregnancy-related conditions, and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Stratus Team’s management Team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs, and general treatment during employment. #LI-MV1

Job DescriptionPosition: Commissioning Project Engineer – Data Center Projects Company: FST Technical Services– Commissioning (Cx) Division Company Overview FST Technical Services’ Commissioning (Cx) Division is a leading provider of quality assurance in the design, construction, and post-acceptance phases of building projects. Our focus is on ensuring that mechanical, electrical, plumbing, and associated systems are properly designed, installed, and tested to meet client requirements and design intent. Position Summary The commissioning project engineer reports to a team leader and is responsible for the delivery and execution of our professional services tasks for equipment in mechanical, electrical, plumbing, and associated systems working on data center projects. Ideal Candidate Profile The ideal candidate will possess a blend of technical commissioning expertise and ideally have previous experience within data center projects. However, those without data center experience but with commissioning experience will be considered. They should have a strong understanding of building system interconnectivity and aptitude for problem solving. Preferably you are open to travel and future temporary relocation. Key Responsibilities: • Primary activities include completing office assignments, time and expense management, in-field installation validation, field observation reports, functional performance testing, meeting attendance and documentation, on-site and factory witness testing, submittal reviews, and design documentation evaluation., • Additional activities include executing target billable hours, managing tasks within time budgeted, leading cx meetings, assisting the construction team with identifying/solving technical issues when they arise, and maintaining positive relations with existing clients on assigned projects., • Administrative activities include supporting the team leader in coordinating with other project engineers and senior project engineers regarding weekly staff scheduling, training/mentoring team members on proper documentation, field procedures, and equipment usage, and participating in the company-wide safety and training programs. Requirements: • Bachelor's degree in HVACR, mechanical or electrical engineering, construction management or an Associate's Degree in Engineering Technology or related trade school, construction, maintenance, or engineering controls experience, • 5+ years' experience related to maintenance, construction, or engineering controls and/or 1+ years in the cx industry, • 3+ years of experience managing the interconnectivity of building equipment including pumps, fans, motors, air ventilation, chillers, boilers, steam distribution, heat absorption, building automation systems, optimization techniques, electrical distribution, and fire alarm systems., • Knowledge of construction drawings, specifications, bid process, and ancillary industry documentsSkills and Attributes, • Technical Proficiency: Ability to independently solve complex problems and work in a team environment., • Communication: Effective verbal and written skills, with public speaking and presentation capabilities., • Physical Fitness: Able to lift 30+ pounds, climb ladders, and work in varying indoor/outdoor conditions., • Technology: Proficiency in Microsoft Office Suite.Preferred Qualifications:, • Trade association involvement, • EIT, ACP, CEM or similar certification from experience, • OSHA 10 or other safe workplace certifications, • Familiarity with building information modelingSalary range: $100,000 to $130,000 - based on experience FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future. Powered by JazzHR yHSbX4ZUM5

Job Description Stratus® is an integrated, multi-disciplinary engineering, architecture, interior design, and consulting firm. Consistently ranking among the Top 500 Design Firms in Engineering News-Record, the firm offers a deep bench of industry experts through a highly collaborative approach, delivering innovative solutions across the full project lifecycle. Operating coast to coast, Stratus® serves clients nationwide while maintaining a strategic commitment to supporting high-growth economies and building vibrant communities that foster the professional growth of its team. Serving public- and private-sector clients, the firm is dedicated to delivering the highest-quality service wherever projects take shape. Across the Civic, Commercial, Industrial, Transportation, Education, Water Resources, and Government sectors, we bring precision, insight, and purpose to every project, from targeted renovations to large-scale infrastructure. Stratus® designs spaces, systems, and solutions that perform, endure, and make an impact, delivering on our promise of Better Plans. Better Places. The Role The Principal Engineer (PE) is responsible for providing senior-level technical leadership on engineering projects. This role focuses on leading the design, analysis, and construction of major projects, offering expert technical guidance to project teams, and serving as the firm’s subject matter expert. The Principal Engineer plays a key role in project success by ensuring that designs meet client expectations, regulatory standards, and technical requirements. Responsibilities • Lead the design and development of complex engineering projects, providing expert technical guidance to project teams., • Provide leadership and oversight for a multidisciplinary team of MEP engineers., • Prepare detailed engineering drawings, calculations, and technical reports, ensuring compliance with regulatory standards and client expectations., • Serve as the primary technical expert on projects, resolving complex design challenges and ensuring that engineering solutions are innovative and technically sound., • Provide mentorship and technical leadership to junior engineers, fostering their professional growth and ensuring technical excellence across the team., • Conduct quality control reviews at key project milestones to ensure accuracy, technical precision, and adherence to project goals., • Collaborate with multidisciplinary teams, including architects, contractors, and consultants, to ensure the seamless integration of engineering systems into overall project designs., • Oversee construction administration tasks, including reviewing submittals, conducting site visits, and addressing technical issues during construction., • Participate in client meetings and presentations, offering technical expertise and ensuring that client needs are met throughout the project lifecycle., • Stay current with industry advancements, emerging technologies, and innovative materials, incorporating new solutions into the firm’s engineering designs., • Provide strategic input on business development efforts, assisting with proposals and client presentations to secure new projects. Qualifications Required • Licensed Professional Engineer (PE)., • Bachelor’s or Master’s degree in engineering from ABET-accredited university., • 10-15 years of experience in engineering design and project management., • Strong leadership and mentorship skills for guiding junior engineers and project teams., • Ability to lead large-scale engineering projects and provide expert-level technical guidance., • Ability to communicate complex technical concepts to both technical and non-technical stakeholder., • Minimum 7 years of progressive MEP engineering experience with a focus on building systems design. Preferred • Experience leading large, complex engineering projects. Why you’ll love Stratus • A team-oriented environment that values transparency, creativity, and shared success, • Meaningful career paths, leadership opportunities, and space to specialize, • Learning & Development – Education and Professional Licensing, • We believe flexible, hybrid work supports the balance and well-being our team deserves, • Excellent Health Care Programs – Medical, Dental, and Vision Insurance, • Company-paid Life Insurance, Short-Term Disability, and Long-Term Disability, • Voluntary Life Insurance options for employees, spouses, and dependents, • 401k Retirement Plan with employer match, • Paid Holidays & Competitive PTO plans Interested in learning more about Stratus, please visit https://www.stratusteam.com/. Equal Opportunity Statement Stratus is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, pregnancy-related conditions, and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Stratus Team’s management Team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs, and general treatment during employment. #LI-MV1

Job Description At Cooper Tacia, we’re building more than projects; we’re building a company where talented people can do meaningful work, take ownership, and grow. Founded in North Carolina in 2003, Cooper Tacia is a dynamic general contractor serving clients across the Southeast. Our work spans complex commercial, industrial, manufacturing, education, government, multifamily, aviation and civil and environmental projects, but what defines us isn’t simply what we build. It’s how we approach the work: with creativity, collaboration, accountability, and a drive to continually raise the standard. We’re growing, and we’re looking for people who want to grow with us. People who bring ideas to the table, build strong relationships, take pride in their work, and want to make an impact on the projects, partners, and communities we serve. We are currently seeking a Quality Control (QC) Manager to serve as the designated Contractor Quality Control Manager and administer the Contractor Quality Control (CQC) program in accordance with project specifications for applicable federal and government projects. Responsibilities: • Develop, implement, and maintain project-specific Quality Control Plans in accordance with contract requirements, company procedures, and owner expectations., • Review drawings, specifications, scopes of work, submittals, shop drawings, product data, and testing requirements before construction activities begin., • Lead and document the Preparatory, Initial, and Follow-Up phases of control for applicable work activities., • Establish inspection and test plans, quality hold points, documentation requirements, and acceptance criteria for each definable feature of work., • Verify that materials, equipment, and installed work conform to approved submittals, specifications, applicable building codes, manufacturer instructions, and project requirements., • Conduct preparatory meetings before each new definable feature of work begins to verify approved documents, material readiness, workforce qualifications, inspection requirements, and quality expectations., • Perform initial inspections at the start of each work activity to confirm workmanship standards, approved mockups, tolerances, testing requirements, and corrective actions., • Conduct routine follow-up inspections to verify ongoing compliance and prevent recurrence of deficiencies., • Monitor subcontractor quality performance and ensure subcontractors understand and follow project quality procedures., • Maintain familiarity with governing codes, ASTM/ANSI standards, project specifications, commissioning requirements, and applicable federal requirements., • Maintain complete, accurate, and timely QC records, including daily reports, inspection reports, testing logs, deficiency logs, photo documentation, meeting minutes, and corrective-action records., • Review and track RFIs, submittals, shop drawings, samples, test reports, certificates of compliance, warranties, and closeout documentation., • Prepare required quality-control reports for project management, owners, architects/engineers, and government representatives. Requirements: • 5-10 years of progressive commercial construction experience, including 3-5years in quality control, quality assurance, superintendent, project engineer, or project-management roles., • Construction Quality Management for Contractors (CQM/CQM-C) certification from a USACE- or NAVFAC-recognized provider; certification must remain active throughout employment and project assignment., • Experience as the designated QC Manager/Contractor Quality Control System Manager on USACE, NAVFAC, Department of Defense, VA, GSA, or other federal construction projects., • Experience with UFGS Section 01 45 00 or other government quality-control specifications., • OSHA 30-hour Construction certification., • ICC, ACI, AWS, NICET, ASQ, LEED, commissioning, or trade-specific inspection certifications relevant to the company’s work., • High standards of workmanship, accountability, and attention to detail., • Sound judgment and confidence to address quality issues constructively and decisively., • Strong field presence and credibility with craft teams and subcontractors., • Organized, deadline-driven, and able to manage multiple documentation streams., • Collaborative communication with owners, design professionals, government representatives, and internal project teams., • Ability to balance quality, constructability, schedule, cost, and client expectations without compromising contract compliance., • Commitment to a safe, professional, and continuous-improvement-oriented work environment. Employment Type: Full-time Benefits • 100% Employer Paid Health, Vision & Dental Insurance for employee, • PTO, • Paid Holidays, • 401K W/ 4% Match, • Company vehicle with fuel card (add only when needed) We are an equal opportunity and drug-free workplace. Pre-employment drug screening required. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of responsibilities, duties and skills required. Personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Lead Sustaining Engineer Pay: $120K - $140K (Depending on experience) Location: Midtown Atlanta, GA, 30308 Summary Our client is seeking a Lead Sustaining Engineer to serve as the functional lead for its new Atlanta office. This role directs the day-to-day work of junior engineers and contract resources — triaging and resolving escalated customer issues, gating fix quality, and driving root-cause investigation on a live, high-availability production codebase. Requirements • .NET development background to read and debug code, • Debugging, log analysis, and observability/monitoring tooling, • Strong problem-solving ability, • Strong communication skills, • Leadership ability Responsibilities • Instigate and solve escalated technical issues, • Deliver clean, well-tested defect fixes, patches, and maintenance releases, • Review fixes authored by junior engineers and contractors, • Mentor and direct junior engineers and contractors Benefits • Full medical, dental, and vision coverage, • 7% 401(k) match, • HSA contributions, • Unlimited PTO, • Early team member of new Atlanta Innovation Center#ZR-REP #LI-JM1

Job Description Hermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. About The Role: As an MRO Propulsion Engineer you will take ownership of the maintenance, refurbishment, and overhaul (MRO) lifecycle of our F100 engines—including acceptance testing. This is a hands-on, high-impact role where you’ll work side-by-side with passionate engineers and technicians to keep our propulsion systems performing at their best. If you want to learn fast, solve hard problems, and contribute directly to hypersonic capability, this is the place for you. Responsibilities Own all or a significant portion of the F100 MRO lifecycle Collaborate daily with cross-disciplinary engineers and technicians Drive high-quality, safe, and efficient refurbishment processes Support testing campaigns and engine acceptance activities Contribute to a fast-paced environment where engineering and execution come together Requirements Bachelor’s or advanced degree in Aerospace or Mechanical Engineering 3+ years of F100 MRO experience, or experience with a similar-thrust class engine 2+ years of professional experience designing flight propulsion hardware Strong engineering fundamentals in: • Combustion, • Thermodynamics, • Heat transfer, • Fluid dynamics, • Structural dynamics, • Materials science Preferred Skills and Experience, • 6+ years of F100 MRO or equivalent experience, • 4+years designing jet or rocket propulsion hardware with CAD +GD&T, • Proven responsibility for flight-proven hardware, • Experience with: air-breathing combustors, augmenters, ignition systems, variable-area nozzles, turbomachinery, high-temperature mechanical assemblies, • Siemens Teamcenter + NX, • ANSYS, • High-temperature alloy design and manufacturing, • Additively manufactured metal alloys, • Jet fuel experience, • Generating work instructions and managing nonconformances, • Instrumentation selection and usage for ground or flight test, • Hands-on experience with machining, welding, or hardware integration, • Hardware certification for flight operations, including test asset development Additional Requirements Willingness to travel to support build and test campaigns Engineer I $91,800 - $112,200 Engineer II $114,750 - $140,250 Engineer III $138,550 - $187,450 The salary range listed for this role is intended as a general guideline. Final compensation will be determined based on a variety of factors, including role scope and responsibilities, relevant experience, education and training, key skills, market data, and business needs. At Hermeus, compensation is only one part of our total rewards package. We offer competitive pay, equity, and a range of benefits designed to support our team. Benefits: • Health & Wellness: 100% employer-paid healthcare and pet insurance, • Financial: Competitive pay, stock options, 401(k) retirement plan, and potential year-end bonuses, • Time Off: Paid parental leave, 12 federal holidays, unlimited PTO for exempt employees, and generous accrued PTO for non-exempt employees, • Office Perks: Weekly paid office lunches and fully stocked breakrooms U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Hermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. #LI-JC3 We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Civil Engineer, PE Location: Atlanta, GA; Chicago, IL; or Washington D.C. (Chantilly, VA) Exp Federal delivers full-service Architecture & Engineering services, construction, and facility management services throughout the world. Exp Federal's mission is to provide superior technical solutions to the U.S. federal government utilizing skilled personnel familiar with working throughout the United States and overseas. The Challenge: We are seeking a Civil Engineer to join our growing design team in our Atlanta, GA; Chicago, IL; or Washington D.C. (Chantilly, VA) office. Principle areas of responsibility are: • Preparation of Construction Documents including specifications, • Use third party applications (AutoTURN, Hydraflow or Geopack Drainage) to generate drawings based on specific project requirements., • Site Design to include siting buildings, design of the geometry of the supporting site features including parking, pedestrian flow, and access roads., • Grading and drainage design including stormwater management and storm sewer design/calculations., • Wet and dry utility design including sizing and alignment., • Direct, mentor and guide junior engineers., • Travels onsite to project fields for client meetings and site inspections and visits: ~25% requirement Qualifications: • Bachelor’s degree in civil engineering from an accredited university., • 5+ years of experience in design within the civil engineering discipline., • PE license required., • Utilities & Hardscape experience., • Proficiency in AutoCAD/Civil3D., • Excellent written and verbal communication skills,, • Ability to obtain and maintain a Security Clearance is required. Optional Experience: • Experience with facilities for clients in the Federal Government sector is highly desirable. Salary Base: This full-time position as a Civil Engineer, level III has an annual base range of $118,700-$144,500. This position is eligible for overtime in accordance with local, state, and federal requirements. The actual hourly rate is based on several factors that are unique to each candidate, including but not limited to skill set, depth of experience, certifications, and specific work location. This may be different in other locations due to differences in the cost of labor. More About Us: Exp Federal delivers full-service Architectural & Engineering and Design-Build solutions. You will be part of an expanding team that works collaboratively across our wider exp Federal design studios. As part of a project team, you will have the opportunity to work on a variety of projects that keep you engaged and showcase your individual talents. We believe in identifying potential in people and then providing opportunities to achieve success. Our employees work on complex projects that require innovative, efficient solutions, and collaboration across various disciplines. Joining our team is a commitment to meaningful work supporting federal government clients across multiple sectors. Employees and clients alike will look to you for results that exceed their expectations. Our Values: Respect: We respect people, honor diversity, and treat each other fairly. These are the cornerstones of our culture and the key to our culture and the key to our ability to work successfully as a global team. Unquestioned Integrity: We operate with the highest standards of honesty and responsibility – as individuals and as a corporation. We’re people who meet routine, everyday obligations with honesty. Safety: We place the highest priority on the health and safety of our employees and protection of our assets and the environment. Our goal is zero work-related injuries. Customer Service: We listen and respond to the changing needs of our customers, the industry, and the environment, and draw upon lessons learned from our experiences around the world. Impeccable Quality: We recognize that quality is fundamental in all our operations — it is everyone’s responsibility. We have established procedures, assessments, and continuous improvement processes in place to ensure the quality of our work. Sustainability: We understand the impact of our work on the environment and that sustainability is a part of everything we do. We work with customers to provide responsible, efficient, healthy, and effective project solutions to reduce our overall environmental impact. What We Offer: • ⌚

Job DescriptionTHIS IS NOT A DATA ENGINEERING RELATED POSITION CAI seeks DC Services Electrical Commissioning Engineers with a minimum of five to seven years' experience in Data Center Commissioning to support development and execution of all electrical aspects of commissioning projects. Position Description: This position supports development and execution of all electrical aspects of assigned commissioning projects from initial engagement, design reviews, checklists, safety support, script development, vendor coordination, testing and report development through turn over to the client. The Electrical Commissioning Engineer will support the development of the electrical test schedule, finalize electrical test procedures, review project submittals for consistency with the design intent, basis of design and the owner’s project requirements, and maintain project cadence for electrical systems testing and associated Building Automation Systems. The Electrical Commissioning Engineer is to support the planning and execution of commissioning for the electrical infrastructure of the mission critical facility. They will be expected to execute against the project schedule through the coordination of contractors and/or vendors to complete the desired electrical systems testing. CAI DC Electrical Commissioning Engineer will be exposed to cutting edge technologies in the Hyperscale and other spaces. You will have an opportunity to work with recognized subject matter experts allowing YOU to be a key player in bringing data technologies to market. As part of our company culture, we invest in YOUR future, and commit to hands on certifications as well as professional training. Our collaborative culture ensures that our customers benefit from exemplary work across our entire range of professional services. Responsibilities: Support all aspects of safety for all electrical tests. Support complete commissioning and performance acceptance testing of the electrical infrastructure systems. QA/QC of all electrical test procedures. Provide input and insight to the overall commissioning plan. Develop reports for the electrical commissioning engineers and contribute to a daily report to the Commissioning Project Manager. Attend and be an active participant of customer equipment Factory Witness Test Assist with vendor coordination and management. Perform equipment inspection to ensure build adherence to vendor submittal. Provide test documentation that equipment is delivered, installed, and tested correctly and set to function properly for the customer. Support and perform design specification review, manufacturer submittals, one line drawing sets, and project schedule documentation. QA/QC of electrical equipment installation\startup Execute test scripts to confirm equipment and system operation to design specification. Ensure safe work practices are followed by all on commissioning team and customer site. Engage with customers to ensure a positive experience, goals achievement, and schedule adherence. Provide daily reports for electrical commissioning team status. Conduct facility walk downs, turnover, and punch list reviews. General understanding of LEED specifications and requirements. Look for new opportunities for CAI to provide service and value to customer. Duties may be increased as experience and skill allow. Requirements include: Position Requirements: Bachelor’s degree or equivalent experience Minimum of five to seven years Data Center Commissioning experience. Knowledge of OSHA and NFPA 70E safety requirements. Good written and spoken communication skills. Ability to read and interpret electrical schematics and specifications. Knowledge of data center design concepts. Knowledge and commissioning experience with Electrical Distribution Switchgear, Substations, Uninterruptable Power Supplies (UPS), Automatic Transfer Switches (ATS), Batteries, Emergency Diesel Generators & Load Banks. Knowledge of power quality analysis. Strong experience with Word, Excel and PowerPoint. Ability to effectively write electrical commissioning scripts, daily reports, and final commissioning reports. Other Requirements: Excellent oral and written English is required Extensive travel may be required (75%) Candidates must have a Passport or the ability to immediately get a Passport. Work under construction site conditions Able to work in the US without sponsorship now or any time in the future. About CAI CAI was established in 1996, that has grown year over year to more than 800 people worldwide. We provide commissioning, qualification, validation, start-up, project management and consulting services related to operational readiness to FDA regulated and other mission critical industries. Are You Ready? Our approach is simple; we put the client’s interests first, we do not stop until it is right, and we will do whatever it takes to get there. We are committed to living our Foundational Principles, both professionally and personally: We act with integrity We serve each other We serve society We work for our future Benefits Our full-time positions offer competitive compensation and benefits which include: 24 days PTO and 5 sick days per year, health insurance at extremely low cost to employee, financial support for both internal and external professional education as well as 70% long term disability paid for by the company. #LI-MV1 #MISSIONCRITICAL Average salary range, not including benefits or compensatory time and possible discretionary bonuses. CAI Benefits: •Comprehensive Health Insurance coverage •24 days of Paid Time Off •Company paid Life Insurance •Company paid Long Term Disability We are an equal opportunity employer; we are proud to employ veterans and promote a diverse culture in our workplace. Diversity is a strength for our global company. We pledge that CAI will be operated in a way that is fair and equitable to all – our employees, our customers, and the broader society. This job description is not all inclusive and you may be asked to do other duties. CAI will also consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the FCO. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionTHIS IS NOT A DATA ENGINEERING RELATED POSITION CAI seeks DC Services Electrical Commissioning Engineers with a minimum of five to seven years' experience in Data Center Commissioning to support development and execution of all electrical aspects of commissioning projects. Position Description: This position supports development and execution of all electrical aspects of assigned commissioning projects from initial engagement, design reviews, checklists, safety support, script development, vendor coordination, testing and report development through turn over to the client. The Electrical Commissioning Engineer will support the development of the electrical test schedule, finalize electrical test procedures, review project submittals for consistency with the design intent, basis of design and the owner’s project requirements, and maintain project cadence for electrical systems testing and associated Building Automation Systems. The Electrical Commissioning Engineer is to support the planning and execution of commissioning for the electrical infrastructure of the mission critical facility. They will be expected to execute against the project schedule through the coordination of contractors and/or vendors to complete the desired electrical systems testing. CAI DC Electrical Commissioning Engineer will be exposed to cutting edge technologies in the Hyperscale and other spaces. You will have an opportunity to work with recognized subject matter experts allowing YOU to be a key player in bringing data technologies to market. As part of our company culture, we invest in YOUR future, and commit to hands on certifications as well as professional training. Our collaborative culture ensures that our customers benefit from exemplary work across our entire range of professional services. Responsibilities: Support all aspects of safety for all electrical tests. Support complete commissioning and performance acceptance testing of the electrical infrastructure systems. QA/QC of all electrical test procedures. Provide input and insight to the overall commissioning plan. Develop reports for the electrical commissioning engineers and contribute to a daily report to the Commissioning Project Manager. Attend and be an active participant of customer equipment Factory Witness Test Assist with vendor coordination and management. Perform equipment inspection to ensure build adherence to vendor submittal. Provide test documentation that equipment is delivered, installed, and tested correctly and set to function properly for the customer. Support and perform design specification review, manufacturer submittals, one line drawing sets, and project schedule documentation. QA/QC of electrical equipment installation\startup Execute test scripts to confirm equipment and system operation to design specification. Ensure safe work practices are followed by all on commissioning team and customer site. Engage with customers to ensure a positive experience, goals achievement, and schedule adherence. Provide daily reports for electrical commissioning team status. Conduct facility walk downs, turnover, and punch list reviews. General understanding of LEED specifications and requirements. Look for new opportunities for CAI to provide service and value to customer. Duties may be increased as experience and skill allow. Requirements include: Position Requirements: Bachelor’s degree or equivalent experience Minimum of five to seven years Data Center Commissioning experience. Knowledge of OSHA and NFPA 70E safety requirements. Good written and spoken communication skills. Ability to read and interpret electrical schematics and specifications. Knowledge of data center design concepts. Knowledge and commissioning experience with Electrical Distribution Switchgear, Substations, Uninterruptable Power Supplies (UPS), Automatic Transfer Switches (ATS), Batteries, Emergency Diesel Generators & Load Banks. Knowledge of power quality analysis. Strong experience with Word, Excel and PowerPoint. Ability to effectively write electrical commissioning scripts, daily reports, and final commissioning reports. Other Requirements: Excellent oral and written English is required Extensive travel may be required (75%) Candidates must have a Passport or the ability to immediately get a Passport. Work under construction site conditions Able to work in the US without sponsorship now or any time in the future. About CAI CAI was established in 1996, that has grown year over year to more than 800 people worldwide. We provide commissioning, qualification, validation, start-up, project management and consulting services related to operational readiness to FDA regulated and other mission critical industries. Are You Ready? Our approach is simple; we put the client’s interests first, we do not stop until it is right, and we will do whatever it takes to get there. We are committed to living our Foundational Principles, both professionally and personally: We act with integrity We serve each other We serve society We work for our future Benefits Our full-time positions offer competitive compensation and benefits which include: 24 days PTO and 5 sick days per year, health insurance at extremely low cost to employee, financial support for both internal and external professional education as well as 70% long term disability paid for by the company. #LI-MV1 #MISSIONCRITICAL Average salary range, not including benefits or compensatory time and possible discretionary bonuses. CAI Benefits: •Comprehensive Health Insurance coverage •24 days of Paid Time Off •Company paid Life Insurance •Company paid Long Term Disability We are an equal opportunity employer; we are proud to employ veterans and promote a diverse culture in our workplace. Diversity is a strength for our global company. We pledge that CAI will be operated in a way that is fair and equitable to all – our employees, our customers, and the broader society. This job description is not all inclusive and you may be asked to do other duties. CAI will also consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the FCO. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Databricks Subject Matter Expert Permanent Full Time Location: Atlanta, Georgia, United States Description: Databricks Subject Matter Expert Position Description We are seeking a highly experienced Databricks Subject Matter Expert to join at the Lead / Principal level. In this role, you will serve as the firm's foremost technical authority on the Databricks Lakehouse Platform, guiding clients through complex data transformation initiatives—from strategic architecture design through hands-on implementation and production deployment. You will partner directly with client stakeholders (CTOs, VPs of Data, and Engineering Leads) to define data strategies, architect scalable solutions on Databricks, and mentor delivery teams. This is a high-visibility role that blends deep technical expertise with client advisory, pre-sales support, and thought leadership. This role is a hybrid model. We are seeking a highly experienced Databricks Subject Matter Expert to join at the Lead / Principal level. In this role, you will serve as the firm's foremost technical authority on the Databricks Lakehouse Platform, guiding clients through complex data transformation initiatives—from strategic architecture design through hands-on implementation and production deployment. You will partner directly with client stakeholders (CTOs, VPs of Data, and Engineering Leads) to define data strategies, architect scalable solutions on Databricks, and mentor delivery teams. This is a high-visibility role that blends deep technical expertise with client advisory, pre-sales support, and thought leadership. Your future duties and responsibilities Solution Architecture & Design . Lead end-to-end design of Databricks Lakehouse architectures, including Delta Lake, Unity Catalog, and medallion (bronze/silver/gold) data models. . Define reference architectures, best practices, and reusable accelerators for client engagements. . Evaluate and recommend deployment patterns across Azure Databricks, AWS Databricks, and GCP, aligning platform choices with client infrastructure and governance needs. Data Engineering & Pipeline Development . Architect and oversee large-scale ETL/ELT pipelines using Apache Spark, Delta Live Tables, and Databricks Workflows. . Design real-time and batch ingestion frameworks covering structured, semi-structured, and unstructured data sources. . Establish data quality, lineage, and observability standards using Unity Catalog, Delta Lake features, and complementary tooling. Machine Learning & MLOps . Guide clients on implementing end-to-end ML workflows using MLflow, Feature Store, and Model Serving on Databricks. . Advise on MLOps patterns including model versioning, A/B testing, monitoring, and automated retraining pipelines. . Collaborate with data science teams to productionize models and integrate ML outputs into business applications. Client Advisory & Engagement Leadership . Serve as the trusted advisor to senior client stakeholders on all matters related to data platform strategy and Databricks adoption. . Lead discovery workshops, architecture reviews, and technical assessments to define solution roadmaps. . Support pre-sales efforts by developing proposals, estimating level of effort, and delivering technical demonstrations. Thought Leadership & Practice Development . Contribute to the firm's intellectual property by developing frameworks, white papers, and training curricula around Databricks. . Mentor and upskill consultants across the data practice; foster a community of Databricks practitioners. . Represent the firm at industry events, Databricks partner summits, and webinars. Required qualifications to be successful in this role . 10+ years of professional experience in data engineering, analytics, or platform architecture. . 5+ years of deep, hands-on experience with Databricks, including production deployments at enterprise scale. . Expert-level proficiency in Apache Spark (PySpark and/or Scala), Delta Lake, and SQL. . Proven track record designing multi-cloud Lakehouse architectures (Azure, AWS, or GCP). . Strong experience with Unity Catalog for data governance, access control, and lineage tracking. . Demonstrated ability to lead client-facing engagements and communicate complex technical concepts to executive audiences. . Experience in a consulting or professional services environment, with a history of managing multiple concurrent engagements. . Bachelor's degree in Computer Science, Engineering, Data Science, or a related field (or equivalent practical experience). Preferred Qualifications . Databricks Certified Data Engineer Professional or Machine Learning Professional certification. . Experience with Delta Live Tables, Databricks Workflows, and Photon engine optimization. . Familiarity with complementary tools such as dbt, Terraform/Pulumi (IaC), and CI/CD pipelines for data platforms. . Hands-on experience with MLflow, Feature Store, and Model Serving in production environments. . Prior experience as a Databricks partner or in a Databricks-aligned practice within a consulting firm. . Advanced degree (M.S. or Ph.D.) in a quantitative or technical discipline. #M1 #DI-CB2 #L1 - KB1 Ref: #404-IT Pittsburgh

Job Description About the Team: The Sensors Division at STR focuses on technology development for advanced sensor systems, particularly in the areas of airborne/surface-based radar, electronic warfare, underwater acoustics, hyperspectral imaging, and EO/IR sensing. Within this role, we perform work on full system prototypes, experiment campaigns and technology component development. Development roles within the Sensors Division include RF analog/digital hardware, acoustic hardware, signal processing algorithms, machine learning algorithms, tracking/fusion, as well as real-time embedded processor implementation. Within the Sensors Division, the Real-time Architectures, Integration and Demonstration (RAID) Group focuses on transition of algorithms from concept to real-time software, providing open architecture expertise, and facilitating integration of capabilities for experimentation, test, and deployment. The RAID Group is seeking a Lead Systems Engineer with demonstrated expertise in Model Based Systems Engineering (MBSE) to help design, develop, implement, test, and maintain real-time software that controls complex hardware systems while complying with open architecture standards. You will work as part of focused teams to transition software products from internally developed and integrated software into production-quality software that can be transitioned to outside integrators for use on their embedded and distributed computing platforms. You will be responsible for developing best practices and automated processes in coordination with software and system engineers to further integrate MBSE into Agile Software development processes. A successful candidate will have experience working on teams that have developed large scale high-performance C/C++ software for sensor systems. Strong understanding of MBSE practices and how they are compatible with real-time systems developed via an Agile process is essential. Experience with open architecture frameworks and standards is highly desired. Strong technical, interpersonal, and communication skills are important for working in collaborative, multi-disciplinary teams. What you will do: • Collaborate with principal investigators, software engineers, and other system engineers to plan, model, develop, test, and document large scale software/hardware systems, • Collaborate with software and system engineers to integrate MBSE artifacts with software development pipelines (code / test generation, large scale code analysis, etc.), • Collaborate with software and system engineers to integrate MBSE processes to streamline software development, • Perform requirement extraction, management, and analysis for RF sensor signal processing or equivalent systems, • Document (and/or support documentation of) system designs, software designs, APIs, implementation details, and technical reports, • Perform peer reviews and suggest next steps for technical work, • Support approximately 5% travel for integration events, customer meetings, and field demonstrations Who you are: • Ability to obtain and retain a Secret or Top Secret Security Clearance, for which U.S citizenship is needed by the U.S government, • PhD + 2 years, MS + 5 years, or BS + 7 years in Systems Engineering, Computer Science, Computer Engineering, Electrical Engineering, or related field, • Experience with Model Based Systems Engineering for medium to large scale agile software development programs, • Strong proficiency with CAMEO or other Model Base Systems Engineering tools, • Experience working with professional software development teams, • Excellent technical writing and communication skills Even Better: • Active Security Clearance at the Secret or Top Secret level (strongly preferred due to clearance processing time), • Experience developing products / toolkits that are integrated by 3rd parties with various hardware and software subsystems, • Proficiency in automated integration of CAMEO or other Model Based Systems engineering tools with Agile development processes, • Experience working with signal processing development teams, • Experience with open architecture standards and frameworks, • Experience with version control systems (Git) and collaborative development practices, • Experience with CAMEO plugin development, • Understanding of RF sensor system concepts, • Familiarity with CI/CD pipelines, and DevOps and integrating MBSE to those systems, • Prior contributions to proposal development and technical writing Pay Information Full-Time Salary Range: $174,000.00 - $225,000.00 The salary range listed is based on external market data. Offers are based on factors, such as but not limited to, the candidate's experience, education, training, key skills/critical skills, security clearances, and prevailing market and business conditions. STR is a growing technology company with locations near Boston, MA, Arlington, VA, near Dayton, OH, Melbourne, FL, Carlsbad, CA, Atlanta, GA, and Denver, CO. We specialize in advanced research and development for defense, intelligence, and national security in: cyber; next generation sensors, radar, sonar, communications, and electronic warfare; and artificial intelligence algorithms and analytics to make sense of the complexity that is exploding around us. STR is committed to creating a collaborative learning environment that supports deep technical understanding and recognizes the contributions and achievements of all team members. Our work is challenging, and we go home at night knowing that we pushed the envelope of technology and made the world safer. STR is not just any company. Our people, culture, and attitude along with their unique set of skills, experiences, and perspectives put us on a trajectory to change the world. We can't do it alone, though - we need fellow trailblazers. If you are one, join our team and help to keep our society safe! Visit us at www.str.us for more info. STR is an equal opportunity employer. We are fully dedicated to hiring the most qualified candidate regardless of race, color, religion, sex (including gender identity, sexual orientation and pregnancy), marital status, national origin, age, veteran status, disability, genetic information or any other characteristic protected by federal, state or local laws. If you need a reasonable accommodation for any portion of the employment process, email us at appassist@str.us and provide your contact info. Pursuant to applicable federal law and regulations, positions at STR require employees to obtain national security clearances and satisfy the requirements for compliance with export control and other applicable laws.

Job Description JOB SUMMARY • The Engineer Design contractor position assists in the planning, design, and development of technical standards for gas distribution infrastructure projects., • The right candidate must be a self-starter, excellent communicator, critical thinker and able to make sound decisions., • The Engineer 1 position requires 0-3 years of related experience and an accredited bachelor’s degree with a focus in Mechanical, Civil or General engineering experience., • Responsible for applying engineering processes, design criteria, and software applications to design and construct power related systems., • Supports estimate preparation, develops design options, and prepares construction specifications., • Provide guidance, oversight, and quality assurance reviews for approved contractors as they develop design solutions, cost estimates, and construction packages JOB RESPONSIBILITIES • Creating a safe work environment by putting safety first, • Understand the process used for planning, design, operation, construction, and maintenance, • Understanding the functions and activities of various internal departments involved in design, construction, and maintenance, • Understanding design practices and work processes, • Using all software applications used in design, understanding industry and Company design standards, • Supporting design standard and criteria development for the system, • Supporting construction and maintenance teams during day-to-day operations, • Estimating material for projects, • Transmitting construction packages, • Supporting specifications. SKILLSETS and EXPERTISE • Introductory engineering knowledge, basic problem-solving skills, limited discretion making independent decisions based on procedure and review with supervisor, • Basic discipline software knowledge, strong work ethic, positive attitude, and the ability to build effective relationships with plant staff, design engineering staff and/or vendors. As our Engineer in the design group, a typical day might include: • Working on gas storage or gas fueling station assignments, • Performing assignments involving the design of components or functionality of pipeline products, • Involved in the planning and design of mechanical equipment and components involving maintenance of mechanical equipment., • Performing system balances to determine the best overall solution to solve system issues or identify system low points and methods to best solve them., • Provide oversight and support for construction activities This might be the job for you if: • You have a high level of interpersonal skills, with the ability to leverage internal and external stakeholders to efficiently accomplish tasks and resolve issues, • You have the ability and initiative to work in a self-guided manner and collaboratively, • You have a customer focused critical thinking mindset with a demonstrated ability to learn and become proficient in proposing solutions and completing tasks., • You have excellent oral and written communication skills, • You can work across a matrix organization structure with horizontal and vertical teams What candidate will need to qualify for this position: • BA/BS in Engineering (Mechanical, Civil or General), • 1-3 years of progressive Engineering experience Or • Equivalent academic education and experience Certifications/Licenses: Preferred: Engineer in Training (E.I.T.) Required Skills: • Project Management, • Ability to communicate with all levels in the organization, • Computer Assisted Design/Geographic Information System - basic proficiency, • MS Office - advanced proficiency, • CAD/GIS - intermediate proficiency \nCompany Description Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with over 40 years of experience investing in people and companies. We offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with over 40 years of experience investing in people and companies. We offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more.\r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Job Description Job Title :: ENGD1- Engineer 1 (Distribution) Location :: Forest Park-GA Contract :: 12+ Months Skills and Responsibilities · A Distribution Engineer is responsible for designing, planning, and managing the electrical distribution systems that deliver electricity to homes, businesses, and industries. They play a crucial role in ensuring the safe, reliable, and efficient distribution of electrical power. Key Responsibilities: Distribution System Design: Design, plan, and optimize electrical distribution systems including overhead and underground lines, substations, transformers, and other components . Ensure compliance with industry standards and regulations. Network Analysis: Perform load flow analysis, fault analysis, and voltage drop calculations to assess the capacity and performance of the distribution network. Identify and mitigate potential issues. · Asset Management: Maintain accurate records of distribution equipment, perform condition assessments, and recommend maintenance, repair, or replacement of aging or damaged assets. Equipment Selection: Specify and select distribution equipment, such as transformers, circuit breakers, switches, and protective devices, considering factors like voltage levels and load requirements. Safety and Compliance: Ensure that distribution · system designs meet safety standards, environmental regulations, and industry codes. · Collaborate with regulatory authorities for approvals and compliance. Reliability Improvement: Identify opportunities to enhance the reliability of the distribution system, reduce downtime, and improve power quality. · Implement strategies for system resilience. New Connections: Evaluate requests for new electrical connections, assess their impact on the distribution network, and design the · necessary infrastructure to support new customers. Project Management: Manage distribution infrastructure projects from conception to completion. Coordinate with · construction crews, contractors, and vendors to ensure project timelines and budgets are met. Emergencies and Outages: Respond to emergency situations, such as power outages or equipment failures, by conducting rapid assessments and developing solutions to restore power. Data Analysis: Analyze data from monitoring systems, smart grids, and sensors to gain insights into distribution system performance and make data-driven decisions. ualifications: Education: A bachelor's degree in electrical engineering or a related field is typically required. A master's degree may be preferred for more specialized roles. · Professional Licensure: Many Distribution Engineers are required to hold a professional engineering license (PE) or similar · Certifications, which vary by region. Technical Skills: Proficiency in distribution system design software, computer-aided design (CAD) tools, and power system simulation software. · Familiarity with AutoCAD and GIS (Geographic Information Systems) may be beneficial. · Knowledge: In-depth knowledge of electrical distribution principles, grid operation, protection systems, and equipment. · Understanding of regulatory requirements and industry standards. Analytical Skills: Strong analytical and problem-solving skills for assessing network performance, diagnosing issues, and proposing solutions. Safety Awareness: A strong commitment to safety protocols and procedures in designing and maintaining electrical distribution systems. · Project Management: Project management

Job Description About Stratus Stratus® is an integrated, multi-disciplinary engineering, architecture, interior design, and consulting firm. Consistently ranking among the Top 500 Design Firms in Engineering News-Record, the firm offers a deep bench of industry experts through a highly collaborative approach, delivering innovative solutions across the full project lifecycle. Operating coast to coast, Stratus® serves clients nationwide while maintaining a strategic commitment to supporting high-growth economies and building vibrant communities that foster the professional growth of its team. Serving public- and private-sector clients, the firm is dedicated to delivering the highest-quality service wherever projects take shape. Across the Civic, Commercial, Industrial, Transportation, Education, Water Resources, and Government sectors, we bring precision, insight, and purpose to every project, from targeted renovations to large-scale infrastructure. Stratus® designs spaces, systems, and solutions that perform, endure, and make an impact, delivering on our promise of Better Plans. Better Places. The Role We are seeking a Senior Engineer - Civil/Site with strong public sector experience to support and lead the design of civil/site and utility infrastructure projects, with an emphasis on water and wastewater system design. This role is ideal for an experienced engineer who can independently prepare plans, lead junior staff, and coordinate with project managers, clients, and agency stakeholders. The successful candidate will be highly proficient in AutoCAD Civil 3D, comfortable working on complex site/utility projects, and capable of producing complete construction documents with minimal oversight. MicroStation experience is a plus, and a PE is preferred. Responsibilities Civil/Site & Utility Design • Prepare civil/site and utility design plans for public sector projects, including:, • Water distribution systems, • Sanitary sewer collection systems, • Pump stations and related infrastructure (as applicable), • Utility relocations and coordination, • Site grading, drainage, and stormwater management, • Develop plan sets, profiles, details, and technical drawings for construction documents, • Perform design calculations and support preparation of technical specifications, • Coordinate permitting requirements and agency standards for public infrastructure projectsProject Execution & Coordination, • Support project managers in delivering projects on schedule and within budget, • Coordinate with internal disciplines, subconsultants, and external stakeholders, • Participate in client and agency meetings, including design reviews and utility coordination meetings, • Support field investigations and construction-phase services as neededTeam Leadership, • Lead and mentor junior engineering staff and CAD designers, • Review work products for quality, accuracy, and adherence to standards, • Guide design approaches, drafting standards, and best practices, • Assist with workload planning and task delegation within project teamsIndependent Production, • Prepare full plan sets independently, including:, • Base mapping and layout, • Alignments and profiles, • Utility plan and profile sheets, • Grading and drainage sheets, • Erosion and sediment control plans, • Construction details and notes, • Maintain organized design files and support QA/QC processes. Qualifications Required • Bachelor’s degree in Civil Engineering (or related field), • 7+ years of progressive experience in civil/site and utility infrastructure design, • Significant experience delivering public sector projects, including water and wastewater system design, • Proficiency in AutoCAD Civil 3D (required), • Demonstrated ability to lead and mentor junior staff, • Ability to prepare plans and construction documents independently with minimal oversight, • Strong understanding of civil engineering design standards, permitting, and plan production workflows, • Strong communication skills and ability to coordinate with project stakeholders Preferred • Professional Engineer (PE) license preferred (or ability to obtain within a defined timeframe), • MicroStation experience is a plus, • Experience with municipal clients, counties, water authorities, and/or state agencies, • Familiarity with Georgia standards and agency review processes (GDOT, local municipalities, etc.), • Experience with construction administration support and responding to RFIs/submittals Why you’ll love Stratus • A team-oriented environment that values transparency, creativity, and shared success, • Meaningful career paths, leadership opportunities, and space to specialize, • Learning & Development – Education and Professional Licensing, • We believe flexible, hybrid work supports the balance and well-being our team deserves, • Excellent Health Care Programs – Medical, Dental, and Vision Insurance, • Company-paid Life Insurance, Short-Term Disability, and Long-Term Disability, • Voluntary Life Insurance options for employees, spouses, and dependents, • 401k Retirement Plan with employer match, • Paid Holidays & Competitive PTO plans Interested in learning more about Stratus, please visit https://www.stratusteam.com/. Equal Opportunity Statement Stratus is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, pregnancy-related conditions, and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Stratus Team’s management Team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs, and general treatment during employment. #LI-HD1

Job Description Senior Transportation Engineer – Highway Design Lead| www.efkmoen.comJoin a dynamic team shaping the future of transportation infrastructure. As a Senior Transportation Engineer – Highway Design Lead at EFK Moen, you'll lead high-impact projects and mentor junior staff in a collaborative, flexible work environment.This position will report to the Transportation Engineer Branch Office Manager in our office located in Atlanta, GA.About EFK MoenEFK Moen, LLC is a civil engineering design consulting firm founded in 1998. With a strong emphasis on transportation, bridge engineering, roadway design, and professional land surveying, our team has delivered over $3 billion in infrastructure projects across multiple states. Our team of professionals is respected across the industry for producing high-quality design documents and innovative solutions.We partner with federal, state, and local agencies and are known for our deep understanding of evolving design guidelines and procedures. By combining the latest technology with diverse experience, we consistently deliver cost-effective, value-engineered solutions that reduce construction costs and improve long-term maintenance.Our services span the full lifecycle of transportation projects-from feasibility studies and public involvement to final PS&E and construction administration. We are proud to be trusted partners in shaping safe, efficient, and resilient infrastructure.Job Description:The Senior Transportation Engineer will work independently and lead others to perform civil engineering design services in a team-oriented environment. Project emphasis is transportation engineering design for both public and private sectors which range in scope from small to multimillion-dollar designs. Services are provided to a wide range of clients that include state DOTs and other governmental agencies – municipal, county and state.Duties & Responsibilities:Lead and produce quality highway/roadway design plans that meet client expectations and adhere to project budgets and schedulesServe as the go-to technical resource for internal staffCollaborate with external design disciplinesSupervise technical execution and confirm accountability across projectsAssist project managers with various project duties when support is neededSupervise and mentor engineers, CAD staff, and junior team members while proactively leading tasks and managing multiple concurrent projects under pressure and tight deadlinesPerform other job duties as assignedQualifications:Bachelor of Science degree in Civil Engineering from an accredited college/university requiredProfessional Engineer (PE) registration in Georgia, or ability to obtain GA licensure in 3 months12+ years of experience in civil/highway design projects for state DOT, County, City and/or other municipal clientsExpert knowledge of GDOT plan development guidelines and standardsFamiliarity with procedures, methodologies, and standards including but limited to the HCM, MUTCD, AASHTO, US Access Board guidelinesProficiency in MicroStation, Geopak, InRoads, and/or OpenRoads Designer (ORD) within GDOT and other agency CADD environmentsProficiency with Excel and other general office softwareStrong verbal, written, and interpersonal communication skillsPhysical Qualifications:Ability to sit and use a computer for extended periodsVisual focus for electronic documents and design softwareSufficient mobility to move to various locations in and out of the office to use various office equipment, coordinate with other staff, visit other EFK Moen and client offices/meeting locationsEFK Moen Offers: Paid Time Off (PTO)Paid Company HolidaysPaid Parental LeaveHealth, Dental and Vision Insurance401(k) with Company ContributionCompany sponsored Short and Long-Term disability coverageCompany sponsored life insurance coverageProfessional License exam fee reimbursementBonus opportunitiesSupport of professional organization membership and activitiesWork-life balance through a flexible, casual work environmentA culture of mentoring and teamworkStarting Salary Range: $120,000–$150,000Pay is based upon candidate experience and qualifications, as well as market and business considerations.EFK Moen is an Equal Opportunity Employer and Drug Free Workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veterans' status, or any other characteristic protected by law. Our organization participates in E-Verify. Applicants must be authorized to work for any employer in the United States.

Job DescriptionJob Title: QA Engineer – Digital Ordering & Customer Experience Location: Atlanta, GA Role Overview: You will ensure high-grade quality across our client’s consumer-facing digital ordering channels, ( iOS & Android apps). Your mission is to deliver a frictionless customer journey—focusing on interactive pizza building, real-time order tracking, localized promo code engines, and loyalty platform. Responsibilities: • Digital Pizza Builder UX: Validate visual, functional, and performance aspects of the digital pizza builder UI across web and mobile platforms (including custom crust choices, topping matrices, and sauce options)., • Rewards & Loyalty: Test end-to-end loyalty mechanics—including Dough Points earning, Papa Dough redemption, reward tiers, and promotional offer stackability.Real-Time Order Tracking: Verify live order status tracking sync between store KDS status triggers and customer-facing push notifications/app updates., • MarTech & Personalization: Test geo-targeted push campaigns, promotional promo code logic (e.g., localized sports team discount codes), SMS messaging, and analytics event tagging (GTM/Segment)., • Payment Wallet Integration: Ensure smooth web and mobile checkout flows supporting Apple Pay, Google Pay, PayPal, Gift Cards, and credit card saving capabilities.Key Qualifications:, • 3–5+ years in QA testing eCommerce platforms, native iOS/Android apps, or QSR digital product suites., • Deep experience validating Loyalty engines (e.g., Punchh, SessionM) and MarTech tools (Braze, Segment, Google Analytics)., • Proficiency with cross-device testing tools (BrowserStack, Sauce Labs) and mobile proxy debugging (Charles Proxy). Powered by JazzHR nYQkvdYJEr

Job DescriptionAbout Clerkie Clerkie is a fintech startup on a mission to democratize financial wellness using the power of artificial intelligence. Launched in 2018, Clerkie began with an app, aiming to help the nearly 123 million underserved Americans in need of financial guidance. Since its inception, the company has expanded its services and now pairs consumer guidance with cutting-edge B2B software. By pairing the two through the Clerkie network, these tools have become the go-to resource for creditors looking to manage loan losses while simultaneously helping millions of borrowers get out of debt. Clerkie is a remote-first company, with over 40 employees spanning 4 time zones across the United States. To date, the company has raised $41 million, including a $33 million Series A round in early 2023. Investors include leading financial and venture institutions, including Citi Ventures, Left Lane Capital, Wellington Ventures, Flourish Ventures, and Vestigo Ventures. About the role We're looking for a Full-Stack engineer who wants to build, own, and ship end-to-end product experiences in a fast-moving environment. This role is ideal for someone who is comfortable working across the stack - from backend systems to user-facing applications - and is ready to take meaningful ownership of features and systems. At Clerkie, engineers don't just implement specs. You'll collaborate closely with product and design, contribute to technical decisions, and help shape how features come to life from concept through production. Because we're still early, this role goes beyond execution. You'll play a key role in how we build - contributing to system design, product development, and the overall evolution of our platform. Here's what you'll do • Build and maintain full-stack features across backend services and user-facing applications, • Own features end-to-end - from design and implementation through production, • Contribute to system reliability, performance, and scalability, • Participate in technical design discussions and architecture decisions, • Collaborate closely with product and design to deliver high-quality user experiences, • Improve visibility into system health and performance, • Contribute to internal engineering practices, tooling, and documentationHere's a snapshot of what the Engineer team tackled recently, • Scaled backend systems to support growing enterprise usage, • Built new infrastructure to support partner integrations, • Improved system observability and production reliability, • Supported high-priority product initiatives tied to revenue growth, • Collaborated closely with leadership on technical direction and tradeoffs, • Refined how we build, ship, and maintain systems, • Helped clean up and organize Coda, our internal knowledge hub, to make life easier for future new hires (like you!), • Onboarded a new teammate to the Engineering team and updated internal rituals to set them up for success, • Spent the day on a private ranch in Jackson Hole horseback riding, axe throwing, eating outside a Michelin Star chef's table, roasting smores under the stars, and celebrating your latest hackathon win, • And more! From big wins to team traditions, it's been a big year so far and we're just getting started ????Must-haves, • Experience building and shipping full-stack applications in production, • Strong fundamentals in backend development and system design, • Proficiency in JavaScript / TypeScript (Node.js and modern frontend frameworks), • Experience working with databases (NoSQL experience is a plus), • Ability to own features end-to-end and operate independently, • Strong communication skills across technical and non-technical teams, • Comfort working in a fast-moving startup environmentNice-to-haves (but not required), • Previous Full-Stack or software engineering experience, • Experience with cloud infrastructure (e.g., AWS), • Experience working on data-intensive or complex applications, • Familiarity with fintech or regulated environments, • Experience in early-stage or high-growth startups, • Curiosity about financial wellness and mission-driven technologyWhat we value, • Strong ownership mindset - you take responsibility for outcomes, not just tasks, • Bias for action - you move quickly and make thoughtful decisions, • Customer-first thinking - you care about the real-world impact of what you build, • Resilience and adaptability - you can navigate ambiguity and evolving priorities, • Desire to build something meaningful and long-lastingOur salary & benefits, • ???? Salary range: $90-150k, • ???? Equity, • ???? Remote-first role (US only), • ???? Medical, dental, and vision insurance, • ???? 401(k) + retirement benefits, • ???? Paid time off + annual company retreat, • ???? Company laptop + home office stipend, • ???? Collaborative, values-driven cultureOur Hiring Process We believe in a two-way interview process that helps us get to know you—and helps you get to know us. • Application & Coderbyte (async candidate time), • Recruiting Screen w/ Head of People (15-20 minutes via Google meet), • Take-Home Challenge & Live Review w/ Sr. Engineer (challenge is async candidate time, live review is 45 mins via Google meet), • Live Coding Challenge w/ Sr. Engineer (90 minutes via Google meet), • Final Management Meeting w/ SLT (45 minutes via Google meet) Before we extend any offers, all candidates must successfully complete a standard background check in addition to a reference check. These checks are conducted in tandem to ensure a safe, secure, and compliant environment for all Clerkie team members and stakeholders. We approach this stage with transparency and sensitivity, and candidates will be provided with clear information about the process. AI & Interview Assessments At Clerkie, we embrace AI and use it throughout our day-to-day work. We value people who thoughtfully leverage modern tools to learn, build, and solve problems more effectively. Our interview process is designed to evaluate each candidate's own technical thinking, communication, and problem-solving approach. To help ensure every candidate is assessed fairly, consistently, and under the same conditions, we ask candidates not to use external problem-solving resources during live interviews or technical assessments unless we explicitly state otherwise. This includes AI assistants, interview assistants, search engines, and other third-party resources. You're welcome to reference any documentation or materials that we provide as part of the interview. This expectation does not apply to approved interview accommodations or assistive technologies. If you require a reasonable accommodation at any stage of our hiring process, please let us know. We're committed to providing an accessible and equitable interview experience for all candidates. If this interview expectation is not followed, we may conclude the assessment and discontinue the interview process.

Job Description Career Renew is recruiting for one of its clients a Technical Product Manager, Data and Internal Products - this is a fully remote position for US-based candidates. Salary range: 180-230K USD plus benefits plus equity. We are the leading provider of innovative identity and risk solutions, empowers institutions and individuals to transact confidently with one another by preventing synthetic fraud, identity theft, and emerging forms of first party fraud at the point of account application. Its solutions enable these secure transactions by leveraging a deep understanding of identity and risk, and are informed by machine learning models and insights from a team of top risk analysts. We proudly serve a broad array of financial institutions, from the largest U.S. banks to leading credit unions and fintech unicorns to help stop fraud at account opening and beyond. Headquartered in San Francisco, the company was founded in 2017 by Naftali Harris and Max Blumenfeld and it has raised $85M to date from investors including Andreessen Horowitz, Craft Ventures, and NYCA Partners, among others. We are looking for a Data Product Manager with 5+ years of experience to lead internal initiatives within our Tech organization. This person will build and maintain our core internal technology, spanning critical datasets, internal services, and the underlying platforms that support our products and analytics. What will you be doing? Own the product vision, roadmap, and execution for internal technical initiatives, with a strong focus on dataintensive systems. Lead cross-functional efforts to improve the quality, reliability, and usability of internal systems, including datasets and shared services. Drive long-term initiatives to future-proof internal data and technology assets, ensuring they scale with evolving needs. Partner with engineering, data science, solutions analytics, and product stakeholders to understand use cases and clarify requirements. Manage prioritization across competing internal demands, balancing immediate impact with long-term strategic value. Key Requirements 5+ years of experience with data-heavy or platform-oriented products, with a focus on ML/Data Science strongly preferred. Hands-on experience working with large datasets (e.g., Spark, Databricks, BigQuery, Snowflake). Strong understanding of big data concepts, data pipelines, data cleaning/normalization, and data modeling. Demonstrated ability to partner effectively with engineering, data science, and analytics teams on deeply technical problems. Experience driving large internal initiatives with multiple stakeholders and managing cross-functional dependencies. Tech stack Spark, Databricks, BigQuery, Snowflake Requirements: 5+ years of experience PM, founder, or equivalent cross-functional product role (Mandatory) Resume must show both big data product work and internal tooling experience with specific projects named (Mandatory) At least 1 year at a Series B/C startup; current or most recent role must be at a startup, not big tech (Mandatory) Prior engineering title required (SWE, data scientist, ML engineer, or highly technical data analyst) (Mandatory) Data pipeline experience required: production-level work with data ingestion, cleaning/normalization, and modeling with specific tools cited (Mandatory) Python and AWS familiarity required; big data tooling (Spark, Databricks, BigQuery, Snowflake, or Redshift) must be explicitly named on resume (Mandatory) Domain experience in fintech, payments, fraud, or identity is a significant differentiator (Nice-to-have) Located and authorized to work in the United States. (Mandatory) Why you should join Market-leading fraud prevention company - We're the go-to identity verification solution for major US banks, credit unions, and fintech unicorns, processing hundreds of millions of identities. $85M raised from top-tier investors - Backed by Andreessen Horowitz, Craft Ventures, and NYCA Partners with strong financial runway. Forbes Fintech 50 recognition - Named to the prestigious list every year since 2023, plus we made history as the first eCBSV provider. Competitive compensation package - $180K-$230K base salary plus equity and comprehensive benefits including employer-paid health insurance for you and dependents. Remote-first culture - Work from anywhere in the US with flexible PTO and regular company-wide in-person events.

Job Description Apply now: Principal Mobile Engineer, location is Hybrid (4 days/week onsite in Atlanta, GA). The start date is ASAP for this permanent position. Job Title: Principal Mobile EngineerLocation-Type: Hybrid (4 days/week onsite – Atlanta, GA)Relocation: Open to relocation candidates with ability to be on-site by day 1 in the roleStart Date Is: ASAPDuration: PermanentCompensation Range: $170,000 – $185,000 annually 15% target bonusBenefits: Eligible for Health, Dental, Vision, 401K, PTO, etc///Must be authorized to work in the U.S. This position is not eligible for sponsorship . Job Description:Seeking a Principal Mobile Engineer to lead technical design and feasibility efforts for enterprise-scale, customer-facing mobile applications while partnering closely with product and engineering leadership to deliver scalable, high-quality solutions. Day-to-Day Responsibilities: • Partner with product teams to evaluate feature feasibility and technical effort., • Create detailed technical implementation documentation aligned with enterprise architecture., • Lead technical design discussions and serve as the mobile subject matter expert., • Provide guidance and technical direction to engineering teams throughout development., • Build proof-of-concepts to evaluate new technologies and approaches., • Support tooling integrations including authentication, observability, monitoring, and analytics., • Translate complex technical concepts into business-friendly recommendations., • Assist with production support, troubleshooting, and release activities., • Contribute to long-term mobile architecture and technology roadmap., • Research emerging technologies and recommend improvements to the platform. Minimum Requirements: • 7–10 years of software engineering experience with strong end-to-end/full-stack knowledge., • 5 years of hands-on React Native development., • Strong JavaScript and Node.js experience., • Experience building enterprise, customer-facing mobile applications., • Experience with authentication and authorization platforms (Auth0 or similar B2C identity solutions)., • Experience integrating payment solutions (Apple Pay, Google Pay, PayPal, etc.)., • Experience implementing push notifications., • Strong understanding of REST APIs and mobile application architecture., • Experience collaborating directly with product managers and business stakeholders., • Excellent communication skills with the ability to influence technical and non-technical audiences., • Experience creating technical documentation and implementation specifications., • Familiarity with Git, Jira, Confluence, and Agile methodologies., • Bachelor's degree in Computer Science, Information Technology, or a related field.Preferred Qualifications:, • TypeScript experience., • Python, Bash, or other scripting languages., • CI/CD pipeline experience., • Terraform or Infrastructure-as-Code exposure., • GraphQL experience., • Feature flag implementation., • Design systems and design token experience., • Next.js or React-based frameworks., • Cloud infrastructure knowledge., • GitHub Copilot or AI-assisted development experience., • CMS experience (Sitecore or similar)., • QSR, retail, or consumer-facing digital platform experience.

Job Description Strength in Trust OneTrust's mission is to enable innovation through the responsible use of data and AI. We believe that ensuring data is trusted shouldn't slow teams down—it should accelerate what's possible. This led us to develop the first technology platform for responsible data use in 2016. Today, with AI representing the latest and most impactful expansion of data yet, OneTrust is once again redefining what responsible innovation looks like. OneTrust, the AI‑Ready Governance Platform™, unifies regulatory intelligence, automation, and connected governance workflows so businesses can continue to move at the speed of AI while ensuring good governance to prevent data misuse at scale. Trusted by thousands of organizations worldwide, OneTrust is shaping the future where trusted data becomes a transformative force for business and society. The Challenge OneTrust is seeking a Staff Software Engineer to join the Reporting and Data Platform team. This is a hands-on individual contributor role focused on designing, building, operating, and improving distributed backend services and data-processing platforms. You will work across Java microservices and Python/PySpark data pipelines, with a strong focus on reliability, scalability, performance, and observability. You will take complex or ambiguous problems from investigation through production delivery and help improve the systems that power reporting and data-driven experiences. Your Mission Technical Ownership and Delivery • Own complex features and technical improvements from discovery through production rollout, making substantial hands-on contributions across backend services and data-processing pipelines., • Investigate ambiguous problems, identify root causes, evaluate trade-offs, and implement pragmatic solutions that improve code quality, maintainability, automated testing, and operational readiness., • Review code and technical designs, document important implementation decisions and system behavior, and partner with product managers, engineers, and other teams to clarify requirements and deliver outcomes., • Apply AI-assisted engineering tools such as Devin, Claude, or similar systems to accelerate delivery while maintaining production-quality design, code, tests, security, and operational readiness. Backend and Distributed Systems • Design and implement production services using Java, Spring Boot, and Maven, including APIs, asynchronous workflows, report generation, aggregation, export, and scheduling capabilities., • Develop event-driven functionality using Kafka and related messaging patterns, and work with caching technologies, relational storage, and service-to-service integrations., • Improve service performance, scalability, fault tolerance, and resource efficiency through appropriate patterns for retries, idempotency, caching, backpressure, concurrency, and failure recovery., • Diagnose issues across services, queues, databases, and downstream dependencies, and modernize established capabilities incrementally while maintaining production stability. Data Engineering • Build and maintain ingestion and transformation pipelines using Python, PySpark, Azure Databricks, and Delta Lake across batch and streaming workloads., • Implement schema evolution, checkpoint management, deduplication, replay, late-arriving-data handling, and standardized data-layer patterns., • Optimize Spark joins, partitioning, Delta operations, cluster utilization, and query performance while troubleshooting failed, delayed, or inefficient Databricks workloads., • Protect tenant boundaries across joins, aggregations, deduplication, and Delta operations; implement data-quality controls; and monitor data freshness, completeness, and correctness., • Work securely with Azure storage, identities, secrets, and encryption mechanisms. Observability, On-Call, and Operational Excellence • Improve observability across backend services, event-driven workflows, and data pipelines using meaningful metrics, structured logs, traces, and business telemetry., • Build and maintain actionable dashboards, monitors, and alerts using Datadog and Grafana, applying OpenTelemetry, Prometheus, and Micrometer patterns where appropriate., • Participate in the on-call rotation and incident-response workflows, using PagerDuty, Datadog monitors, or equivalent platforms to diagnose production issues and drive sustainable resolution., • Reduce recurring alerts and operational toil by improving alert quality, eliminating noisy or non-actionable monitors, creating runbooks and diagnostic tools, and implementing corrective actions from blameless incident reviews., • Improve end-to-end correlation and monitor availability, error rates, latency, ingestion lag, data freshness, event throughput, consumer lag, job health, rejected records, checkpoint health, tenant-specific failures, data-quality violations, and Spark resource utilization. What Success Looks Like • You require limited direction after understanding the desired outcome and relevant constraints, and you break ambiguous problems into concrete, deliverable work., • You own work through design, implementation, testing, deployment, production validation, and ongoing operation., • You use production evidence and telemetry to prioritize improvements and resolve root causes rather than repeatedly treating symptoms., • You reduce alert volume and operational toil over time without hiding genuine system risks, leaving systems easier to operate after each incident., • You make sound trade-offs among delivery speed, reliability, performance, security, cost, and maintainability while collaborating constructively without formal authority.You Are You are a self-directed, hands-on Staff Engineer who enjoys solving complex problems across distributed services and data platforms. You think in systems and trade-offs, take ownership of production behavior, and use clear design thinking to simplify solutions and reduce code-delivery cycles. You are motivated by building reliable, secure, and maintainable systems and by improving them over time. • Comfortable working across service, platform, data, and partner-team boundaries without needing formal authority., • Pragmatic about when to build, reuse, or modernize, with sound judgment around reliability, performance, security, cost, and maintainability., • Committed to test-driven development, early validation, and production-quality engineering practices., • Thoughtful about using AI-assisted development tools to accelerate implementation while preserving engineering judgment and accountability., • Focused on reducing recurring failure modes, alert noise, and operational burden through engineering improvements.Your Experience Includes Required • Strong professional experience building and operating production software systems as a highly autonomous individual contributor., • Strong proficiency in Java and Spring Boot, with experience designing and operating distributed systems and microservices., • Production experience with asynchronous or event-driven systems, preferably Apache Kafka., • Strong experience with Python, PySpark, Apache Spark, and Delta Lake, plus production experience with Azure Databricks or a comparable managed Spark platform., • Hands-on experience with test-driven development, automated testing strategies, and quality gates that support fast, reliable delivery., • Strong understanding of metrics, logs, distributed tracing, dashboards, monitoring, and alerting, including hands-on experience with Datadog and Grafana., • Experience creating or responding to PagerDuty incidents, Datadog alerts, or equivalent production alerting workflows, and willingness to participate in an on-call rotation., • Experience using AI engineering tools such as Devin, Claude, or similar systems to produce production-ready code, tests, documentation, and operational improvements., • Strong design-thinking skills and the ability to reduce delivery-cycle time through clear architecture, smaller increments, reusable patterns, and pragmatic technical trade-offs., • Ability to independently diagnose complex performance and reliability problems and communicate implementation decisions and technical trade-offs clearly. Preferred • Experience with both batch and streaming data pipelines and with optimizing Spark or Databricks workloads for performance, reliability, and cost., • Experience with Databricks SQL, Databricks SDKs, Delta operations, and schema migrations., • Familiarity with Azure Blob Storage, Azure Identity, and Azure Key Vault., • Experience operating reporting, analytics, dashboard, or large-scale export systems., • Experience with Kubernetes, containers, CI/CD, and infrastructure as code., • Experience defining or applying service-level indicators, service-level objectives, and error budgets, and using incident and alert trends to prioritize engineering work., • Understanding of data governance, encryption, audit-ability, and tenant isolation., • Experience modernizing established production systems incrementally. For California, Colorado, Connecticut, Nevada, New York, Rhode Island, and Washington-based candidates: the annual base pay range for this role is listed below. Within this range, individual pay is determined by several factors, including location, job-related skills, work experience, and relevant education and/or training. This role may also be eligible for discretionary bonuses, equity, and/or commissions, as well as benefits. Salary Range $139,725—$209,588 USD Where we Work We are embracing an office-first culture, encouraging three days a week in office for most roles, with meaningful opportunities to collaborate and celebrate in person. Each role may have specific requirements or flexibility depending on the scope of the position, so we encourage you to verify this with your recruiter during your first interview. Benefits As an employee at OneTrust, you will be part of the OneTeam. That means you'll receive support physically, mentally, and emotionally so that you can do your best work both in and out of the office. This includes comprehensive healthcare coverage, flexible PTO, equity RSUs, annual performance bonus opportunities, retirement account support, 14+ weeks of paid parental leave, career development opportunities, company-paid privacy certification exam fees, and much more. Specific benefits differ by country. For more information, talk to your recruiter or visit onetrust.com/careers. Resources Check out the following to learn more about OneTrust and its people: • OneTrust Careers on YouTube, • @LifeatOneTrust on InstagramYour Data You have the right to have your personal data updated or removed. You also have the right to have a copy of the information OneTrust holds about you. Further details about these rights are available on the website in our Privacy Overview. You can change your mind at any time and have your personal data removed from our database. In order to do this you must contact us and let us know you wish to be removed. The request should be made on the Data Subject Request Form. Recruitment fraud warning: OneTrust is aware of scams involving false offers of employment with our company. The fraudulent jobs, interviews and job offers use fake websites, email addresses, group chat and text messages. Be aware that we never ask candidates for personal information, IDs or bank information during the interview process. We do not interview prospective candidates via instant message or group chat, and do not require candidates to purchase products or services, or process payments on our behalf as a condition of any employment offer. Please note that any legitimate interview availability requests will come directly from a OneTrust recruiter with an "@onetrust.com" email address. You may also receive legitimate emails from "@us.greenhouse-mail.io". Recruiters will only reach out to candidates who have applied for a role through our ATS (Greenhouse) or prospects via LinkedIn InMail. Job offers will come from a recruiter and may have a "@docusign.net" email address. For more information or if you have been targeted please reach out to askrecruiting@onetrust.com. Our Commitment to You When you join OneTrust you are stepping onto a launching pad — the countdown has begun. The destination? A career without boundaries working alongside a diverse and inclusive crew who is passionate about doing meaningful work. As a pioneer, your voice and expertise will help chart the direction of an entirely new category. Our commitment to putting people first starts with you. Your growth is part of the mission. Our goal is to give you the power to embark on the next phase of your uniquely, unique career. OneTrust provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by local laws.

Job Description Career Renew is recruiting for one of its clients a Web Engineer - this is a fully remote role for US/Canada candidates. Visa sponsorships available. Salary range: 170-220K USD yearly plus benefits plus equity. Our mission is to empower everyone to take action on their data. Hundreds of companies, including Autotrader, Calendly, Cars.com, Monday.com, and PetSmart, trust us to power their growth. We pioneered the Composable Customer Data Platform (CDP), which lets companies use their own data warehouse to collect, prepare, and activate customer data for marketing personalization and business operations. Our new AI Decisioning platform goes a step further, allowing marketers to set goals and guardrails that AI agents can then use to personalize 1:1 customer interactions. Traditionally, only technical teams had the skills to access and use customer data. With us, every business user can deliver personalized customer experiences, optimize performance marketing, and move faster by leveraging data and AI across their organization. The Web Engineering team owns our public website, which is the face of our company and brand and one of the most important ways that customers and prospects learn about us. We’re looking for a talented senior web engineer who is passionate about crafting exceptional experiences and cares deeply about the story that we tell customers. As we continue to scale rapidly, you will play a pivotal role in shaping how we position and promote our new product offerings, including cutting edge advancements in marketing AI and ML. In this role, you’ll partner closely with our marketing and design teams to build, iterate, and maintain our marketing website. Key responsibilities include: Lead the design, scoping, and implementation of marketing website projects such as new feature pages, blog revamps, and more Integrate CMS-powered interfaces (we use Sanity) that allow marketers to update content independently Build and maintain our design system to ensure we can continue to build with high velocity and high standards for UX Develop engaging animations that enhance product storytelling using technologies such as Motion and GSAP Exercise strong design judgment and attention to detail to ensure that every aspect of our site reinforces our brand identity Tech stack React, CSS, TypeScript, Next.js, Framer Motion, GASP Requirements: 5 - 12 years of experience in software/web engineering, with a high bar quality and bias towards shipping changes often (Mandatory) End to end work on several high traffic websites for top-tier B2B SaaS companies (Mandatory) Been a part of teams/companies for a substantial amount of time (2+ years) and shows clear individual impact (Mandatory) Experience helping lead cross functional teams (marketing and design) (Nice-to-have) Portfolio of high quality frontend work (Nice-to-have) Proficiency in React, CSS, TypeScript and Next.js (Mandatory) Proven experience with code-based animations (e.g., using Framer, GSAP or Lottie) (Mandatory) Understanding of SEO principles and best practices—especially around performance, accessibility, and search optimization. (Nice-to-have) Very opinionated about design and creative with even small design choices (Mandatory) Ability to mentor more junior engineering and direct engineering for the marketing site (Mandatory) Why join us? Raised $80M in latest Series C funding round Remote position Various benefits Will get to have continued ownership around this project and be able to lead cross functional teams and mentor engineers on this team. Working with top companies in retail, startups, and tech. Beating the competition on several metrics and growing rapidly.

Job Description ABOUT BIP CAPITAL BIP Capital is an integrated private market investment platform built to create and capture opportunities through BIP Ventures traditional venture anchor funds, an Evergreen equity BDC, and private credit offerings. With a distinctive multi-stage, multi-sector investment approach and a growing array of capital offerings, BIP Capital has generated consistent top quartile returns since 2009. OUR PHILOSOPHY We are champions of our investors’ goals and stewards of founders’ dreams, but more than that, we are ethical, honest partners who serve, educate, and protect our founders and investors. We take on the challenges and complex conversations because we operate out of integrity and genuine care. ABOUT THE ROLE BIP Capital's technology team is hiring a Junior AI Engineer to help bring large language models into the day to day work of an investment platform. You'll work directly with a Senior AI Engineer to add AI capabilities to our existing full-stack applications, and to design and ship retrieval-augmented generation (RAG) systems, agentic workflows, and prompt-engineered LLM pipelines that real investment and operations teams rely on. This is an apprenticeship-style role built for someone early in their career who is a strong full-stack engineer first and genuinely curious about applied AI. You will not be expected to own architecture on day one. You will be expected to execute well, learn quickly, and take real work off the Senior AI Engineer's plate within your first few months Office Environment: Hybrid / On-site (In-office Wednesdays). What you'll do • Add AI capabilities to our existing full-stack applications: new LLM-powered features, workflows, and interfaces built directly into the products our investment and operations teams already use., • Build and improve RAG systems with a Senior AI Engineer, from chunking and embedding strategies through retrieval quality and evaluation., • Manage context windows and model inputs: decide what information a model actually needs, how to structure it, and when a task calls for a different model or a multi-modal approach across text, documents, and images., • Help design agentic workflows when the problem calls for it, including multi-step LLM pipelines, tool use, and orchestration., • Prompt-engineer and evaluate LLM workflows, treating prompts and retrieval as things you measure rather than guess at., • Write clean, testable services and data pipelines that move information reliably between systems., • Translate fuzzy workflow needs from investment and operations colleagues into concrete technical problems. Requirements What we're looking for We weigh engineering fundamentals and trajectory far more heavily than years of experience or a specific pedigree. This is a product engineering role: we want a full-stack engineer who is genuinely excited about building with large language models, someone who thinks naturally in terms of retrieval, embeddings, context windows, and tool use, and who wants to ship features real people use day to day. • Bachelor’s or Master’s in Computer Science, AI/ML, Engineering, or a related field., • Solid software engineering fundamentals in Node.js and TypeScript: REST APIs, async and promise-based concurrency, a testing framework such as Jest or Vitest, and everyday comfort in git. Our front end runs on AWS Amplify, so familiarity there is a plus. Python is a nice to have, especially for RAG and data-heavy work, but it is not our primary stack., • Exposure to cloud infrastructure, ideally AWS, including AWS's AI and LLM services such as Bedrock, Bedrock AgentCore, and Knowledge Bases for Bedrock., • Practical experience with LLM APIs (OpenAI, Anthropic, or similar): function calling and tool use, structured outputs, streaming responses, and managing token usage and context window limits., • Hands-on experience building something real with LLMs, ideally something you can point to: a project, prototype, or shipped feature you can walk us through, including what broke and how you fixed it., • Comfort designing LLM-in-the-loop evaluation and testing pipelines: building golden datasets, using LLM-as-judge scoring, and writing regression tests for prompts and retrieval, with tools such as promptfoo, Braintrust, or Ragas., • Comfort with AI native development practices: using tools like Claude Code or Cursor as part of your everyday workflow, not as a novelty., • An instinct to measure. When you change a prompt, a retrieval step, or a model, your first question is “how do I know this made it better,” whether the answer is an eval score, a latency number, or a cost-per-call tradeoff., • Coachability and initiative: you can take a loosely specified task and make visible progress without needing every detail spelled out., • Clear communication. Our users are non-technical investment and operations professionals., • Must be authorized to work in the U.S. without current or future employer sponsorship. We are unable to sponsor employment visas for this position, including candidates who would require sponsorship following F-1 OPT/CPT. Bonus points • Working familiarity with RAG mechanics: chunking and embedding strategies, vector stores such as pgvector, Pinecone, or Weaviate, embedding model choice, hybrid search, and reranking., • Familiarity with an agent or RAG framework (LangChain.js, LlamaIndex, AWS Strands, or a current agent SDK), though we care more that you can learn one quickly than that you know today's flavor., • Experience shipping AI features inside a production full-stack application, not just a standalone prototype., • Awareness of data sensitivity: why investor, deal, and LP information cannot flow into arbitrary public models., • Exposure to the Model Context Protocol (MCP), whether that's building MCP servers and tools or connecting agents to them. Success metrics • By 90 days: you're taking sprint tasks directly, running on a weekly 1:1 cadence with your Senior AI Engineer, and have shipped a medium-significance contribution to an active RAG or agentic workflow project., • By one year: you own an increasing share of the day-to-day work on at least one RAG or agentic workflow component, with your Senior AI Engineer retaining design and review oversight, and you're a regular, hands-on contributor to the eval and testing pipeline for the workflows you support. How we work You'll sit on a small, embedded technology team and apprentice closely to one Senior AI Engineer. We value people who ask good questions, ship working software, and can explain a complex idea simply. What you build gets used inside the firm, often within days Benefits WHY JOIN US • Impact: Build AI systems and autonomous workflows that directly influence investment decisions, portfolio growth, and firm efficiency., • Innovation: Be on the leading edge of applying AI/LLMs to venture capital workflows., • Collaboration: Work with a lean, entrepreneurial team of investors, technologists, and operators., • Growth: Opportunity to expand into broader AI/ML roles as the firm scales its technology platform. WHY JOIN BIP CAPITAL • Top-quartile Performance: We are a leading venture capital firm in a vibrant tech ecosystem offering national prominence., • Internal Growth: We foster critical thinking and promote internal advancement from day one., • Unique Value Proposition: Our firm boasts a robust, defensible value proposition supported by a high-net-worth investor base., • Merit-based Environment: We encourage you to bet on yourself, leveraging your merit to excel and thrive., • Benefits: We offer a comprehensive benefits package that includes competitive salaries, health and wellness plans, retirement savings options, paid time off, professional development opportunities, and various employee well-being programs. BIP Capital is committed to creating a diverse environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. BIP Capital is also committed to compliance with all fair employment practices regarding citizenship and immigration status.

Job Description Are we the road to your future? We are currently searching for an experienced Senior Roadway Engineer to support our Southeast Region located in Atlanta, GA. To be considered for this position, applicants must have, at minimum, a BS degree in Civil Engineering from an accredited four-year college or university. What you’ll be doing: • Leading or assisting in the development of project designs and directing EIs and designers to successfully execute and deliver project work, while implementing client focused strategies, • Calculating plan quantities and developing engineering estimates, developing construction specifications, and coordinating with subconsultants, • Applying established and well-defined engineering techniques, procedures, policies, or standards, • Preparing reports, specifications, plans, construction schedules, and designs for projects, • Working in a team environment team to deliver a range of transportation and civil design projects and participating in business development efforts and meetings with clients, • Participating in ongoing development, communication and implementation of team concepts, programs, and policies. Coordinating work to ensure best practices with all team members, • Adjust and correlate data, recognizing discrepancies in results, • Identify and analyze problems using reasoning to arrive at conclusions, • Apply standard practices and techniques to accomplish work assignments, • Understand and adhere to assigned phase and task schedules and budgets to ensure timely and cost-effective completion of project, • Adhere to company standards for quality assurance and quality control as defined in the quality manual What you need to have: • BS degree in Civil Engineering from an accredited four-year college or university, • 6 - 12 years relevant experience in roadway design, • Must have proven skills in meeting DOT expectations, schedules, and budgets, • Written and communication skills, • GDOT experience is preferred but not required, • PE is required, • Experienced in DOT design methods, plan preparation, standards, and specifications, • Proficient with MicroStation, OpenRoads Designer, and/or Inroads, • Strong interpersonal and communication skills, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines., • Valid driver’s license and a satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-HF1 Georgia

Job Description Job Title: Senior Software Engineer Job Type: Contract Location: Remote Job Summary: In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. No prior experience in AI is required — your domain knowledge is what matters. We are seeking strong Software Engineers to join our customer's team with expertise in Python3, Java, Rust, Go, C++, or TypeScript. This is a unique opportunity to directly impact the next generation of AI by leveraging your advanced engineering skills in a dynamic, remote setting. Required Skills and Qualifications: • Proficiency in Python3, Java, Rust, or TypeScript, with additional experience in C++ or Go considered a strong asset., • Deep understanding of algorithms, data structures, and performance tuning., • Demonstrated experience in debugging complex software issues and delivering maintainable solutions., • Strong background in feature development and codebase refactoring., • Proven ability to optimize software for performance and scalability., • Exceptional written and verbal communication skills, with a keen attention to detail., • Track record of success in collaborative, cross-functional teams, ideally in remote settings. Preferred Qualifications: • Previous experience working on large-scale, distributed codebases., • Familiarity with modern AI or machine learning systems is a plus, though not required., • Background in participating in rigorous code reviews and contributing to the development of software best practices.

Job Description Hazen and Sawyer is seeking an experienced Geotechnical Engineer to be part of our Water Resources Practice Group with a focus on Dam, Levee, and Hydropower Services. Successful candidates will lead and manage projects and pursuits in our Mid-Atlantic Region and across the U.S. The position requirements include: Why Hazen and Sawyer: • Founded in 1951, we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 80+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals., • We have a growing staff of nearly 100 water professionals in Georgia. Key Responsibilities: • Lead and manage a multi-disciplinary team on design projects, including overseeing the production of construction drawings, specifications, and other bid documents., • Lead, manage, and prepare engineering studies and preliminary engineering design studies., • Lead and manage proposal pursuits for new project and client opportunities., • Support other projects within the Dam, Levee and Hydropower Services Group with geotechnical design items., • Support other projects across the firm with geotechnical items, issues, and subcontractors., • Develop and implement quality control plans for your work and serve as a quality reviewer for work performed by others., • Successfully interface with and develop relationships with clients and other stakeholders., • Perform the work with limited oversight or supervision., • Lead and collaborate with others, and mentor and develop junior staff., • Possess fundamental knowledge of geotechnical engineering; specifically, as it relates to embankment stability, seepage, internal erosion, settlement, and instrumentation., • Possess professional organizational, writing, and verbal communication skills., • Up to 20% travel across Hazen’s Mid-Atlantic region, with occasional travel across the continental U.S. for projects, group planning, and technical conferences Required Qualifications: • Bachelor of Science degree in Civil Engineering, Geotechnical Engineering, Geologic Engineering, or equivalent is required., • Master of Science/Engineering degree in Civil Engineering, Geotechnical Engineering, Geologic Engineering, or equivalent is a plus., • Licensed professional engineer in at least one state is required (GA, NC, and VA preferred) with the ability to become licensed in multiple states., • Minimum 10 years of progressive engineering experience on heavy civil infrastructure, dam, levee, hydropower, and/or water resource projects., • Minimum 3 years of project management experience on heavy civil infrastructure, dam, levee, hydropower, and/or water resource design projects., • Experience that includes production of construction documents is a plus., • Experience analyzing and designing solutions for geo-structural projects is a plus., • Professional society involvement/volunteerism at the State or National level is a plus., • Risk assessment experience and/or training is a plus. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionPosition Title: Senior Electrical Engineer Company Overview:S. L. King & Associates, Inc. is a leading provider of Mechanical, Electrical, and Plumbing (MEP) solutions, dedicated to delivering innovative and sustainable engineering solutions to our clients across various industries. With a commitment to excellence and a focus on cutting-edge technology, we strive to exceed our clients' expectations in every project we undertake. Position Overview:We are seeking an experienced Senior Electrical Engineer to be part of our electrical engineering team in delivering innovative electrical and instrumentation control solutions for water/wastewater projects. As a key member of our team, you will be responsible for designing, analyzing, and overseeing the implementation of electrical systems, instrumentation control, and P&IDs to ensure they meet project requirements and industry standards. Your expertise will contribute to the successful delivery of complex projects and the continued growth of our company. Key Responsibilities: • Lead the design and development of electrical systems, including power distribution, lighting, communication, and all other power components and electrical specifications. Also, provide all instrumentation and control design and provide P&ID’s and specifications., • Provide technical leadership and mentorship to junior engineers and design staff, ensuring the quality and accuracy of engineering deliverables., • Conduct detailed electrical calculations, load analyses, and short circuit studies using engineering software and tools., • Prepare comprehensive engineering drawings, specifications, and construction documents in compliance with applicable codes, standards, and regulations., • Collaborate with multidisciplinary teams, including architects, mechanical engineers, and clients, to integrate electrical systems with overall building designs., • Evaluate and select electrical equipment, components, and materials based on project requirements, performance criteria, and budget constraints., • Review contractor submittals, shop drawings, and requests for information (RFIs) to ensure compliance with design specifications and contract documents., • Perform site visits and inspections during construction to monitor the installation and commissioning of electrical systems and resolve any technical issues that may arise., • Stay abreast of industry trends, emerging technologies, and best practices in electrical engineering to continually enhance the company's capabilities and expertise.Qualifications:, • Georgia Professional Engineer (PE) license required., • Bachelor's degree in Electrical Engineering or related field., • 5+ years of progressive experience in electrical engineering, preferably in Water/Wastewater and/or Industrial consulting or design., • Expertise in electrical design software (e.g., AutoCAD, Revit MEP, SKM PowerTools) and other relevant engineering tools., • Strong knowledge of electrical codes, standards, and regulations, including NEC, NFPA, and IEEE., • Proven track record of successfully leading and managing electrical engineering projects from conception to completion., • Excellent communication, leadership, and interpersonal skills, with the ability to effectively collaborate with internal teams and external stakeholders., • Demonstrated ability to prioritize tasks, meet deadlines, and manage multiple projects concurrently., • Strong analytical and problem-solving skills, with keen attention to detail and accuracy. Benefits:• 2 weeks per year paid time off (PTO), as well as paid holidays offered by the Company.• Participate in the Company’s 401 (k) plan • Company benefits that include medical, dental, vision, life insurance, short-term and long- term disability plans, as well as plans offered by ALFAC. Application Process:If you are passionate about electrical engineering and eager to make a difference in the Water/Wastewater industry, we invite you to send your resume and cover letter to Dorice Bostic dbostic@slking.com. We look forward to welcoming you to our team!

Job Description Senior Data Engineer Atlanta, GA or Washington, DC - ONSITE Compensation: $140,000.00 - $155,000.00Must be U.S. Citizen or Lawful Permanent Resident (Green Card Holder) per government contract Security Clearance: Must be able to obtain Public Trust In this position you will play a critical role within the organization, helping to manage and transform complex data ecosystems to provide scalable, analysis-ready solutions that inform senior leadership decisions. You will be at the technical forefront of data pipeline development, data architecture, and infrastructure optimization, ensuring that the organization’s analytical operations rest on a robust and secure foundation. This is a role for a highly technical and driven individual capable of building enterprise-level data management systems that support current and future data science initiatives. Your expertise will enable critical insights, informing strategies, optimizing data processes, and facilitating efficient decision-making. You will work alongside a team of data scientists, operational leaders, and infrastructure architects to maintain the integrity, scalability, and performance of critical data systems within the organization. Key Responsibilities: • Design, implement, and maintain enterprise?grade ETL/ELT pipelines using Python and SQL • Build, optimize, and manage data models, warehouses, and lakehouse environments (e.g., Databricks) • Develop processes for ingesting, cleaning, validating, and transforming large?scale datasets from APIs, relational sources, and unstructured systems • Implement data quality, metadata management, and governance controls to ensure consistency and trust in analytics workflows • Collaborate with cloud engineering teams to deploy and manage data solutions on Azure • Monitor, troubleshoot, and improve pipeline performance using logging, alerting, and CI/CD practices • Document data architecture, pipeline logic, and operational procedures to enable team collaboration and maintainability You Have: • 8+ years of experience in data engineering, software engineering, or database architecture • 6+ years of experience in Python and SQL with experience building scalable ETL/ELT pipelines • 2+ years of experience with cloud data ecosystems like Azure Data Factory • 1+ years of experience with modern data processing frameworks like Databricks • Experience with integrating and transforming data from diverse formats and systems (APIs, flat files, relational sources) • Knowledge of relational and NoSQL databases, data modeling, and schema design • Knowledge of data governance, security, and compliance principles for enterprise data environments • Ability to support on-site work in Atlanta, GA or Washington, DC • Bachelor’s degree in computer science, Engineering, Information Systems, or a related, quantitative field • Must be a U.S. Citizen or Lawful Permanent Resident (Green Card Holder) Nice If You Have: • Experience with supporting key data engineering efforts in a government related environment • Experience with collaborating with data scientists and analysts to define data models that meet evolving organizational goals • Knowledge of IT infrastructure practices and data access methodologies • Knowledge of advanced data security practices, governance policies, and compliance frameworks • Certifications such as Azure Data Engineer Associate System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M-1 #LI-VH1 Ref: #851-Rockville-S1

Job Description Senior Frontend Software Engineer - Lead Location: Remote Employment Type: Full-Time About the Role We are seeking a Senior Software Engineer to provide technical leadership for a suite of consumer-facing web and mobile products. This is a hands-on engineering role designed for someone who enjoys building software, guiding technical direction, and helping distributed teams execute effectively. You'll work closely with Product, Design, and Engineering teams to create exceptional customer experiences while ensuring scalability, reliability, and maintainability across a growing platform. The ideal candidate combines strong frontend expertise with product thinking, architectural judgment, and a passion for mentoring other engineers. What You'll DoTechnical Leadership • Lead the design and implementation of complex, high-impact software initiatives., • Translate business and product objectives into clear technical plans and execution strategies., • Identify architectural tradeoffs, dependencies, and risks early in the development lifecycle., • Help establish and maintain development standards, best practices, and technical direction.Software Development, • Build and maintain modern web applications using React, Next.js, TypeScript, and JavaScript., • Contribute directly to production code and participate in key technical decisions., • Develop and maintain integrations with backend services and APIs., • Support mobile application initiatives and cross-platform user experiences.Platform Reliability & Scale, • Improve application performance, scalability, and resiliency., • Drive efforts around observability, monitoring, incident response, and root-cause analysis., • Support systems designed to handle high-volume transactional traffic and revenue-critical events., • Participate in production support and on-call activities as needed.Cross-Functional Collaboration, • Partner closely with Product and Design teams to improve customer experiences from discovery through post-purchase engagement., • Collaborate with platform, infrastructure, and engineering teams across multiple initiatives., • Coordinate work across internal stakeholders and external development partners., • Communicate technical concepts and tradeoffs clearly to both technical and non-technical audiences.Mentorship & Team Development, • Conduct code reviews and provide technical guidance to engineering team members., • Facilitate architecture discussions and encourage sound engineering decision-making., • Promote a culture of quality, ownership, accountability, and continuous learning., • Help develop engineering talent through coaching, collaboration, and knowledge sharing.Required Qualifications, • 7+ years of professional software engineering experience., • Experience leading technical delivery for a product, platform, or engineering team., • Strong expertise with:, • React, • Next.js, • TypeScript, • JavaScript, • Experience with Node.js and API-driven architectures., • Experience designing and supporting customer-facing applications in production environments., • Strong understanding of:, • Distributed systems, • Authentication and authorization, • Caching strategies, • Third-party integrations, • Asynchronous workflows, • Experience with cloud-native development and deployment practices., • Strong communication and collaboration skills.Preferred Qualifications, • Experience with React Native, Expo, or mobile application development., • AWS, Vercel, or other modern cloud platform experience., • Experience with PostgreSQL or other relational databases., • Familiarity with Ruby on Rails, Python, or similar backend technologies., • Experience implementing observability practices using tools such as Datadog, Sentry, or similar platforms., • Strong testing background including unit, integration, and end-to-end testing., • Experience with e-commerce, marketplaces, checkout systems, payment platforms, or multi-tenant SaaS applications.

Job Description Sr Fire Protection and Plumbing Engineer - Atlanta, GA Our client is a Engineering Design Company that has a national footprint and specializes in MEP Critical Facilities Design. They provide design, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Candidate will work with customers to gather design requirements for plumbing and fire protection design projects supporting various mission critical / data center centric projects. Will translate requirements to internal design team, while providing updates to customer. Responsibilities: • Design Plumbing and Fire protection systems in mission critical facilities - trade floors, labs, control rooms, data centers, etc., • Fire and plumbing engineering and design of systems cold and hot water systems, non-potable water systems, water treatment, sanitary drainage and vent systems, storm drainage systems, all types of pumping systems, natural gas distribution systems, special plumbing systems; fire suppression systems; sprinkler piping design, including hydraulic calculations; Incipient fire detection systems, • Work on multiple projects simultaneously, • Coordinate with other internal engineering disciplines to achieve successful, functional and innovative designs for our clients, • Interact with other building disciplines (architectural, structural, electrical, mechanical, civil, controls, etc.) to ensure compatibility with the design intent, • Select equipment for use in building systems and write reports, • Provide specifications for all fire protection and plumbing materials and equipment, • Go to client site as needed for project meetings/site observations, • Perform field surveys at customer sites to document existing conditions and/or observation of construction activities, • Participate in client project requirement meetings and value analysis and basic cost estimating, • Conduct QA /QC / quality assurance and quality control on project, • Perform and oversee the performance of load calculations and system design using company standard software, and proprietary manufacturer software, • Develop Plumbing and Fire Protection Drawings, • Design and document Plumbing and Fire Protection systems, • Assist in the continued development and updating of standards and specifications for the plumbing and fire protection, • Familiarity with renovation and new work projects; appropriate codes, standards and industry best practices, • Prepare Contract Documents using Revit and AutoCAD, • Engage in the development of a design through sketches, electronic models, diagrams, and other visual formats Qualifications: • Bachelor's degree in Mechanical / Fire Protection / Plumbing engineering degree required, • Previous experience at an engineering consulting MEP firm a big plus, • PE; Professional Engineer a big plus, • Mission Critical Facilities Experience a huge plus!, • 5+ years' experience or more of plumbing design and fire protection systems, • Strong technical knowledge in fire protection and plumbing, • Excellent organization and planning skills, • A sound knowledge of engineering fundamentals, • Highly motivated, proactive and willing to take on new challenges, • Strong computer skills and skilled in software typically used in plumbing / fire protection design (i.e. hydraulic calculations, etc.), • Strong working knowledge of building, plumbing and fire codes, • Strong communication skills! Excellent written and verbal!, • Revit Experience is a must, • Ability to interface with clients, • International Codes and NFPA Requirements Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: zrn16qmfx6qp3q6k7bzr4w3src@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionSenior Electrical & Instrumentation Engineer Location: Atlanta, Georgia 30336 Work Arrangement: On-Site About Nexus Circular Nexus Circular is the commercial leader in advanced recycling technology, transforming landfill-bound plastics into circular feedstocks for sustainable virgin plastic production in packaging and beyond. Our end-to-end solution is economically validated through consistent bulk sales of high-quality, ISCC Plus certified circular feedstocks. Aligned with global partners seeking proven, scalable solutions to meet ambitious plastic circulity goals, Nexus Circular is rapidly expanding its innovation footprint worldwide to address the complex challenges of plastic accumulation in our environment. Our Culture Nexus Circular has built an outstanding culture. We're seeking talented individuals to contribute to a fast-paced, environmentally committed business focused on growth and sustainability. We value collaboration, transparency, and data-driven decision-making. We embrace diverse perspectives and encourage constructive initiatives and new ideas. We're looking for self-starters and independent thinkers who work collaboratively in teams—and given our growth stage, we need people comfortable moving fluidly between strategic thinking and hands-on execution to take Nexus to the next level. Role Overview Nexus Circular is seeking a Senior Electrical & Instrumentation Engineer to lead electrical engineering for capital projects, facility expansions, and process upgrades. You will support projects from concept development through engineering, procurement, construction, commissioning, startup, and closeout. Reporting to the Electrical Engineering Manager, you will serve as Nexus's electrical technical representative when working with EPC firms, consultants, utilities, equipment suppliers, contractors, and internal project teams. Your instrumentation and controls responsibilities will focus primarily on electrical interfaces and coordination. Key Responsibilities • Serve as electrical discipline lead and owner's technical representative for assigned capital projects, • Establish electrical and instrumentation design criteria, scopes of work, technical requirements, deliverables, and acceptance criteria, • Direct and review work performed by EPC firms, consultants, vendors, system integrators, and construction contractors, • Develop and review calculations, specifications, data sheets, RFQs, technical bid evaluations, drawings, and construction packages, • Lead the design and integration of:, • Medium- and low-voltage power distribution, • Substations, transformers, switchgear, and switchboards, • MCCs, motors, VFDs, panelboards, relays, and circuit breakers, • UPS, battery, DC, emergency, and standby power systems, • Grounding, lightning protection, heat tracing, lighting, and receptacle systems, • Review load-flow, motor-starting, short-circuit, coordination, arc-flash, grounding, and cable-sizing studies, • Evaluate existing electrical-system capacity and identify required upgrades for new process loads, • Review P&IDs, instrument indexes, I/O lists, instrument data sheets, loop diagrams, control narratives, and cause-and-effect matrices, • Support the selection and specification of process instruments, including pressure, temperature, flow, level, analytical, and final control elements, • Coordinate instrumentation power, grounding, signal segregation, cable routing, junction boxes, remote I/O, and hazardous-area requirements, • Review PLC, HMI, control-panel, industrial-network, and packaged-equipment interfaces for technical completeness, • Coordinate with controls engineers and system integrators on interlocks, alarms, permissives, shutdowns, and equipment sequences, • Coordinate electrical and instrumentation requirements with process, mechanical, piping, civil/structural, construction, operations, safety, and procurement teams, • Review EPC schedules, document registers, technical deviations, field changes, and change-order proposals, • Support vendor inspections, Factory Acceptance Testing, construction walkdowns, loop checks, Site Acceptance Testing, energization, commissioning, and startup, • Review RFIs, test reports, relay results, calibration records, loop folders, and commissioning documentation, • Participate in MOC, PHA, HAZOP, constructability, PSSR, and commissioning-readiness reviews, • Identify technical, procurement, cost, and schedule risks and recommend corrective actions, • Ensure compliance with Nexus standards and applicable NEC, NFPA, IEEE, ANSI, ISA, UL, OSHA, utility, and hazardous-area requirements, • Mentor engineers and designers, • Travel approximately 10–20%, depending on project requirements Required Qualifications, • Bachelor's degree in Electrical Engineering from an ABET-accredited program, • Seven or more years of electrical and instrumentation engineering experience in chemical, petrochemical, energy, manufacturing, or a related process industry, • Experience delivering capital projects through engineering, procurement, construction, commissioning, and startup, • Experience as an electrical discipline lead, project technical lead, or owner's engineer, • Experience overseeing EPC firms, consultants, equipment suppliers, system integrators, and construction contractors, • Strong knowledge of industrial power distribution through 480 VAC and working knowledge of medium-voltage systems, • Experience with substations, transformers, switchgear, MCCs, motors, VFDs, protective relays, grounding, and industrial electrical infrastructure, • Working knowledge of process instrumentation, control valves, analyzers, PLC systems, remote I/O, and industrial control networks, • Ability to review P&IDs, instrument data sheets, I/O lists, loop diagrams, control narratives, cause-and-effect matrices, single-line diagrams, and vendor drawings, • Understanding of instrumentation power, grounding, shielding, signal segregation, intrinsic safety, and hazardous-area installation requirements, • Experience reviewing electrical-system studies, specifications, RFQs, technical bid evaluations, and construction packages, • Knowledge of applicable NEC, NFPA, IEEE, ANSI, ISA, UL, OSHA, and hazardous-area requirements, • Experience supporting electrical and instrumentation construction, testing, loop checks, energization, commissioning, and startup, • Strong technical leadership, communication, organization, and problem-solving skills, • Ability to manage multiple projects and priorities Preferred Qualifications, • Experience managing multiple EPC or engineering contractors, • Experience with medium-voltage systems rated 4.16 kV or higher, • Experience with ETAP, EasyPower, SKM, AutoCAD Electrical, or similar tools, • Familiarity with Rockwell ControlLogix, Siemens, Codesys, or similar control platforms, • Familiarity with Ethernet/IP, Modbus TCP/RTU, Profibus, Profinet, HART, and other industrial communication protocols, • Experience specifying pressure, temperature, flow, level, analytical, and control-valve applications, • Experience reviewing safety instrumented functions, shutdown logic, alarm rationalization, and packaged-equipment controls, • Experience with FAT, SAT, relay testing, instrument calibration, loop checks, MOC, PHA, HAZOP, and PSSR, • Experience in advanced recycling, chemical processing, refining, plastics, renewable fuels, or related industries Key Competencies, • Strong electrical engineering judgment with practical instrumentation and controls knowledge, • Ability to evaluate EPC and vendor engineering for completeness, quality, integration, and constructability, • Ability to identify gaps between process requirements and electrical, instrumentation, and control-system designs, • Ability to balance safety, reliability, operability, cost, and schedule, • Strong commercial awareness and stakeholder communication, • Ability to lead through influence in a fast-paced, multidisciplinary environment Note: The above statements are intended to describe the general nature and level of work being performed by the incumbent. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of this position. Equal Opportunity Employer: Nexus Circular is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Nexus Circular provides reasonable accommodations when requested by a qualified applicant with a disability unless such accommodations would cause an undue hardship. Statement to Third-Party Agencies: Nexus Circular only accepts resumes from agencies with which we formally engage their services. Please do not forward any resumes, as Nexus Circular is not responsible for any fees or charges associated with unsolicited resumes.

Job Description AppFolio is more than a company. We're a community of dreamers, big thinkers, problem solvers, active listeners, and multipliers. At every opportunity, we set the pace while delivering innovation built to carry real estate into the future. One in which every experience feels effortless, yet meaningful. Where customers are empowered to take on any opportunity. We show up as one team, connected by our values to be a force for good. Because together, we have the power to create extraordinary outcomes for our customers, our communities, and ourselves. The Senior Software Engineer on the Permissions team will help build the authorization platform that decides who can do what in all AppFolio products — the foundation that keeps every customer's data safe and every workflow trustworthy. Your work supports every engineering team at AppFolio and, through them, the property managers, owners, investors, and residents who rely on our platform every day. You'll design systems that make access control fast, clear, and dependable at scale, and partner closely with teammates and other teams to make the secure path the easy path. We welcome engineers from a wide range of backgrounds and experiences; if you're excited about this work, we'd love to hear from you. Your impact Design, build, and operate the authorization platform — the roles, policies, and access checks that other teams build on top of Improve the speed and reliability of permission checks so they stay fast as usage grows, and set the performance and availability goals that keep them there Build the interfaces, libraries, and tooling that other engineering teams use to easily add access control to their own features, so they can move quickly and safely Lead the migration of older, hard-to-maintain permissions logic onto the modern authorization platform, reducing risk and complexity along the way Raise the technical bar through thoughtful design reviews, pragmatic code review, and clear written proposals that help the team make good decisions together Mentor engineers, share context generously, and partner with product, security, and engineering teams to turn ambiguous access-control needs into simple, well-understood systems Own quality end-to-end - automated testing, controlled rollouts (with feature flags), and observability - so authorization changes ship safely without disrupting the teams that depend on them Qualifications Work comfortably across the stack - backend services and customer-facing interfaces - and pick up new languages and tools as needed Diagnose and improve performance and reliability in systems that serve high request volumes Drive to root causes and cut unnecessary complexity rather than patch symptoms Experience with authorization, authentication, or other security-sensitive systems is a plus Communicate proactively and clearly in writing and conversation, explaining technical trade-offs to both engineers and non-engineers Collaborate generously across your team and with engineering teams org-wide — giving and receiving feedback well and helping others do their best work Prioritize team delivery over individual productivity Must have 7+ years of professional software engineering experience building and operating production systems Fluency with AI coding agents - experience with any of the available agents, understanding of common concepts, and willingness to learn and utilize AI for building Depth in some of the languages we use — Ruby on Rails, Go, or React with TypeScript — or the ability and desire to become effective in them quickly A track record of designing and owning non-trivial Platform systems end-to-end Location Find out more about our locations by visiting our site. All late-stage candidates complete an in-person meeting with an AppFolian as part of our hiring process. Compensation & Benefits The base salary that we reasonably expect to pay for this role is $138,400 - $190,300 The actual base salary for this role will be determined by a variety of factors, including but not limited to the candidate’s skills, education, experience, etc. Please note that base pay is one important aspect of a compelling Total Rewards package. The base pay range indicated here does not include any additional benefits or bonuses/commissions that you may be eligible for based on your role and/or employment type. Regular full-time employees are eligible for benefits - see here. #LI-SS

Job DescriptionAbout the job Job Purpose We are seeking a Sales Engineer specializing in Mission Critical Video solutions. The position will be responsible for driving revenue by managing the pre-sales technical process and providing technical expertise and support to the sales team and clients. This role involves designing, specifying, and supporting mission-critical systems tailored for streaming media workflows operations centers. The ideal candidate will have a strong technical background in Systems Engineering, Network Engineering or AV/IT, preferably with experience in control room environments, excellent communication skills, and the ability to translate complex technical concepts into solutions that meet customer needs. RESPONSIBILITES: • Own the technical design of Company solutions proposed to partners and customers., • Become a Company technical evangelist, capable of demonstrating and explaining our products to both high-level decision makers and “deep dive” technical personnel., • Assist Account Executives with overall account management within assigned accounts & territories, • Assist sales account managers with project management for complex presales engagements., • Provide pre-sales technical/architectural support to partners and customers., • Remain knowledgeable and current with industry trends and technical developments that affect target markets, including competitive information., • Establish long-term relationships with resellers and integrators., • Attend and assist with the setup and operation of technical systems at regional training and tradeshows., • Provide support on-site and remote post-sale support when necessary., • Produce technical documentation including but not limited to, specifications, drawings, network diagrams and cost estimates, • Comfortable with domestic travel, including occasional international travel when necessary. SKILLS AND QUALIFICATIONS • Bachelors degree or higher in computer science, engineering or information systems (relevant experience in the military or industry can substitute for a degree), • Minimum of 3+ years in a pre-sales engineering role in the AV/IT space or similar discipline., • Experience in designing and implementing AV/IT systems for control rooms and operation centers, including video processing, video wall software, IP video, encoding and decoding technologies and advanced IP networks., • Experience with the design and deployment of streaming media services across complex LAN/WAN topologies., • Experience with network and computing security standards and best practices in government and commercial applications., • Experience with the design and deployment of audio-visual systems and components that complement Company solutions., • Some combination of experience in designing or managing of the following:, • Linux or Mac OSX server infrastructures, • Microsoft Windows Server and Active Directory infrastructures, • Local and wide area networks (routing/switching, wireless LAN, firewall security)., • Experience troubleshooting video processors, network media streaming solutions and multicast video distribution., • Familiarity with video compression technologies and real-time media transport protocols, such as MPEG-2 and MPEG-4/H.264, HEVC, RTP, MPEG2-TS, RTMP, HLS and MPEG-DASH., • Ability to interpret and / or produce design documents including but not limited to specifications, single-line diagrams and network architecture diagrams, • Understanding of web development or scripting languages such as Python, JavaScript, or various command shells, HIGHLY DESIREABLE: • Relevant certifications such as CompTIA Security+, CTS-D, CTS-I, CCNA, CCDP or equivalent., • Identity and access management experience with authentication, authorization, and access control mechanisms. ABOUT US: Haivision is a leading global provider of mission-critical, real-time video networking and visual collaboration solutions. Our connected cloud and intelligent edge technologies enable organizations globally to engage audiences, enhance collaboration, and support decision making. We provide high-quality, low latency, secure, and reliable live video at a global scale. Haivision open sourced its award-winning SRT low latency video streaming protocol and founded the SRT Alliance to support its adoption. Awarded four Emmys® for Technology and Engineering from the National Academy of Television Arts and Sciences, Haivision continues to fuel the future of IP video transformation. Founded in 2004, Haivision is headquartered in Montreal and Chicago with offices, sales, and support located throughout the Americas, Europe, and Asia. To learn more, visit Haivision at haivision.com. Why Work at Haivision MCS? Haivision is a small, cohesive group that provides exceptional products to a loyal and diverse client base. We’re a group of people who enjoy working together as well as with our awesome technology. We support professional growth and a comfortable work/life balance. Team members enjoy competitive compensation with full benefits, flexible schedules, ergonomic working stations and other perks. Our relaxed but inspiring headquarters is nested in Atlanta’s flourishing Armour Yards, right across the street from SweetWater Brewery and directly adjacent to Fox Brother’s BBQ. Haivision MCS is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status. Powered by JazzHR Tui18l2DIX

Job Description Sound Tech EngineerClassification: Independent Contractor (1099)Location: Atlanta, GACompensation: Project-based / Per service Education: Bachelor’s Degree in Audio Engineering or Music Production preferred Position OverviewEncounter Church Atlanta is seeking a skilled Sound Tech Engineer to provide professional audio services for Sunday worship services, special events, and ministry gatherings. This is an independent contractor position compensated on a project/per-service basis. The ideal candidate brings technical excellence and a heart for ministry, understanding that quality sound is a form of service to God and congregation alike. Responsibilities• Operate front-of-house (FOH) audio system during live worship services and events• Manage in-ear monitor (IEM) and stage monitor mixes for worship team and speakers• Conduct pre-service soundchecks and coordinate audio needs with worship team leads• Set up and break down audio equipment in accordance with service schedules• Route and support livestream/broadcast audio in coordination with the media team• Troubleshoot audio issues efficiently and discreetly during live services• Maintain cleanliness and organization of the tech booth and stage• Communicate proactively with worship and production leadership on technical needs Qualifications Required• 4+ years of demonstrated experience operating live sound in a church, event, or venue setting• Proficiency with digital mixing consoles (e.g., Behringer X32/M32, Yamaha CL/QL, Allen & Heath)• Working knowledge of gain structure, EQ, compression, and effects in a live environment• Strong critical listening skills, particularly in a worship music context• Reliable, punctual, and able to commit to scheduled services and rehearsals• Alignment with Encounter Church’s faith values and ministry culture Preferred• Bachelor’s Degree in Audio Engineering, Music Production, or a related field• Studio production and music recording experience, including session tracking, mixing in a DAW environment, and signal chain management• Keyboard proficiency and working knowledge of MIDI, virtual instruments, or keys-based worship production• Familiarity with Dante/AVB audio networking or digital stage boxes• Experience with ProPresenter, Reaper, or live broadcast/streaming audio• Background in worship production or professional AV environments• Ability to read chord charts or basic musical notation Contractor Terms• This is a 1099 independent contractor engagement; no benefits are provided• Compensation is negotiated per service or project; invoicing is contractor’s responsibility• Contractor is responsible for their own tax withholding and self-employment taxes• Engagement is at-will and may be structured as ongoing or event-specific Typical Service Commitment• Sunday services (11:00 AM) — arrive approximately 3 to 4 hours prior to service start• Midweek rehearsals (Thursdays at 8:00 PM) as scheduled with the worship leader and team• Special services: conferences, revivals, holiday services, and community events