Trabajos shop supervisor en Rochester, New YorkCrear alertas

Job Description Job Summary: Works from given instructions, will run various manual and CNC lathe/mill machines. Essential Duties and Responsibilities: • Accountable for manufacturing complex parts., • Able to control product quality during production runs using calipers, dial bore gages, micrometers, etc., • Measure and work with tight tolerance in accordance with control plan and blueprint., • Good working knowledge of proper machine operation and safety., • Keeps work area clean and organized. Additional Responsibilities: • May be required to edit offsets at machine and/or change tools., • When requested, may work on special projects and various related assignments., • May be required to work in various areas of operations when necessary., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel and must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 50 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Minimum of 2 years experience in a machine shop environment., • Familiar with G and M codes., • Ability to read and understand blueprints., • Good communication skills., • Must be a team player. This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job Description Technician I, Garage Days – Alignments Reports To: Fleet Maintenance Supervisor Salary Range: Starting Pay: $33.17 per hour | Top Rate Within 3 Years: $41.48 per hour Schedule: 7:00 a.m. – 3:30 p.m., Monday, Thursday–Sunday Days Off: Tuesday & Wednesday Union Representation: ATU Local 282 Make an Impact at RTS At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees serving eight counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders each year. As a Technician I, Garage Days – Alignments, you'll play a vital role in maintaining the safety and reliability of our fleet by performing alignments, repairs, inspections, and preventive maintenance on buses and support vehicles. Why Join RTS? Staying Healthy • Medical, Dental & Vision Insurance, • Flexible Spending Account (FSA) Feeling Secure • RTS Pension Plan, • NYS Deferred Compensation Plan, • Life, Disability & Supplemental Insurance, • Union representation through ATU Local 282 Work-Life Balance • Paid Time Off, • Paid Holidays, • Employee Assistance Program, • 24/7 Fitness Center, • Wellness Program, • Culture & Inclusion Council, • Public Service Loan Forgiveness (PSLF), • Employee Discounts & More Career & Professional Growth • Advance to top pay of $41.48/hour within 3 years, • Stable, consistent work with weekly pay, • Paid training on current vehicle technologies, • Tool allowance and boot allowance, • Opportunities for advancement within Fleet Maintenance About the Role The Technician I, Garage Days – Alignments position is responsible for performing front-wheel alignments, preventive maintenance, diagnostics, repairs, and overhauls on RTS buses and fleet vehicles. This role ensures vehicles remain safe, reliable, and available for daily service while supporting overall fleet maintenance operations. What You'll Do • Perform front-wheel alignments to maximize tire life on articulated buses, 40-foot buses, and non-revenue vehicles., • Maintain, repair, and overhaul RTS buses and fleet vehicles., • Perform inspections, diagnostics, and preventive maintenance., • Replace, adjust, and repair mechanical components., • Complete required test drives following repairs., • Operate diagnostic software and equipment, including Cummins InSite and Allison diagnostic systems., • Perform welding, brazing, and cutting torch work as required., • Operate tow trucks and respond to road calls when assigned., • Perform articulated bus repairs and overhauls., • Complete ramp and battery preventive maintenance inspections and repairs., • Report safety concerns, equipment defects, and maintenance issues to supervisors., • Maintain accurate maintenance documentation., • Perform other duties as assigned. What We're Looking For Required Qualifications • Two (2) years in an accredited diesel mechanics program or comparable technical coursework; OR • Equivalent verifiable work experience (two years of work experience may substitute for one year of education)., • Excellent customer service and communication skills., • Must provide own tools., • Must obtain a New York State CDL Class B permit with passenger and air brake endorsements prior to employment., • Must obtain a CDL Class B license within 90 days of hire., • Must obtain a CDL Class A permit with towing endorsement (may be obtained after hire)., • Must obtain a CDL Class A license within 90 days of receiving the permit., • Must successfully complete a post-offer physical examination., • Must be able to read, write, and communicate effectively in English for safety, communication, and use of technical manuals. Preferred Qualifications • Experience performing heavy-duty vehicle alignments., • Experience maintaining transit buses or commercial diesel vehicles., • Experience using electronic diagnostic systems., • Welding and fabrication experience. Knowledge, Skills & Abilities • Knowledge of diesel engine repair and preventive maintenance practices., • Ability to perform accurate front-wheel alignments., • Knowledge of mechanical, hydraulic, electrical, and pneumatic systems., • Ability to diagnose and repair vehicle systems using computerized diagnostic equipment., • Ability to safely operate shop equipment and towing vehicles., • Strong troubleshooting and problem-solving skills., • Ability to work independently and as part of a team., • Strong verbal and written communication skills., • Commitment to workplace safety and quality workmanship. Working Conditions & Physical Requirements The physical demands described are representative of those required to successfully perform the essential functions of this position. Reasonable accommodations may be provided for qualified individuals with disabilities. • Frequently required to stand, walk, reach, use hands, talk, and hear., • Occasionally required to sit, climb, balance, stoop, kneel, crouch, or crawl., • Frequently lift or move up to 20 pounds., • Occasionally lift or move up to 75 pounds., • Must possess close, distance, color, peripheral, and depth vision with the ability to adjust focus., • Regularly works around moving mechanical equipment., • Frequently works outdoors in varying weather conditions., • Occasionally exposed to wet or humid environments, fumes, airborne particles, vibration, and chemicals., • Work environment includes moderate to loud noise levels. Equal Employment Opportunity Rochester Genesee Regional Transportation Authority (RGRTA) is committed to providing equal employment opportunities to all applicants and employees without regard to race, color, religion, national origin, citizenship or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic protected by applicable federal, state, or local law. RGRTA will provide reasonable accommodations to qualified applicants and employees with known disabilities unless doing so would impose an undue hardship on the operation of the organization. For safety-sensitive positions, RGRTA maintains a drug- and alcohol-free workplace in accordance with Department of Transportation (DOT) and Federal Transit Administration (FTA) regulations. Applicants for safety-sensitive positions must successfully complete a pre-employment drug test and receive a verified negative test result before performing safety-sensitive functions. Employees in these positions are also subject to additional drug and alcohol testing throughout their employment as required by applicable regulations. As required by law, RTS tests for a variety of substances, including cocaine, amphetamines, opioids, phencyclidine (PCP), and marijuana metabolites. Please be aware that marijuana can remain detectable in the body for an extended period of time—sometimes more than 30 days—and may result in a positive drug test long after use.

Job DescriptionOur values start with our people, join a team that values you! Bring your talents to Ross, our leading off-price retail chain with over 2,200 stores, and a strong track record of success and growth. Our focus has always been bringing our customers a constant stream of high-quality brands and on-trend merchandise at extraordinary savings. All while providing a fun and exciting treasure hunt experience. As Part Of Our Team, You Will Experience: • Success. Our winning team pursues excellence while learning and evolving., • Career growth. We develop industry leading talent because Ross grows when our people grow., • Teamwork. We work together to solve the hard problems and find the right solution., • Our commitment to Diversity, Equality & Inclusion, and our community. We celebrate the backgrounds, identities, and ideas of those who work and shop with us because our differences make us stronger. We strive to be a positive force in our community. Our Corporate headquarters are in Dublin, CA, we have 3 buying offices in key markets in New York City, Los Angeles, and Boston, and 8 distribution centers nationwide. With 2025 revenues of $22.8 billion, we are a Fortune 500 company who is committed to providing an inclusive work environment with continuous learning opportunities and development for our teams. General Purpose: The Retail Associate is responsible for ensuring our Customers have a positive shopping experience. The Associate makes eye contact, smiles, and greets all Customers in a courteous and friendly manner, treats fellow Associates with respect, efficiently follows all company best practice standards as outlined in all work centers, maintains a clean work area at all times, and ensures proper merchandise presentation. The Retail Associate is expected to be engaged in these tasks as assigned during all working hours and will be expected to perform a range of functions in all areas of the Store as business needs require. The Associate may be requested to perform additional tasks in specific situations, if performance of these tasks will help achieve our Customer service and operational goals. Essential Functions: • Understands that safety is the number one priority and practices safe behaviors in everything they do., • Maintains a high level of awareness on the sales floor to create a safe and secure shopping environment for everyone. Maintains clutter free, clear egress to emergency exits. Immediately corrects or reports any unsafe conditions or practices to Store Leadership., • Treats all Customers and Associates with respect and courtesy; is friendly and professional at all times. Recognizes fellow Associates using Company recognition programs., • Assists Customers in any way necessary - is register-trained, assists Customers with merchandise, and answers Customer questions in a polite and knowledgeable manner. Greets all Customers by making eye contact, smiling and saying "hello" throughout the Store as well as saying "thank you" with every register transaction., • Provides prompt and efficient responses to Customers at all times. Responds to Customer Service calls immediately. Handles all Customer issues in a courteous and helpful way, calling a member of the Store Leadership when needed., • Represents and supports the Company brand at all times., • Performs cleaning tasks such as sweeping, mopping, dusting, wiping counters and mirrors, replenishing restroom supplies, and disinfecting high-touch areas including the front-end, sales floor and restrooms to help maintain merchandise, customer and Team areas., • Maintains a professional appearance and adheres to the Company's dress code at all times., • Performs cleaning tasks such as sweeping, mopping, dusting, wiping counters and mirrors, and replenishing restroom supplies to help maintain merchandise, customer and Team areas., • Performs daily assigned sizing and recovery per company best practice to ensure a neat, clean and organized store that is well-maintained and efficiently merchandised to standards., • Expedites newly received merchandise receipts to the sales floor with a sense of urgency, merchandising all items per company best practice to the monthly presentation guidelines and maintaining merchandise/brand name familiarity within departments to assist Customers., • Understands the Loss Prevention Awareness program, the Shortage Highway, the Store Protection Specialist (SPS) position (where applicable), and merchandise protection standards., • As a representative of Ross Inc., demonstrates integrity and honesty in all interactions with Associates and Customers. Safeguards confidential information, cash and credit card information, and merchandise., • Follows all Mark-Out-of-Stock (MOS) policies, including the identification of MOS merchandise, proper processing of each piece and the notification of Store Leadership to review and approve all disposals., • Follows all policies and procedures concerning cash, check, charge card and refund transactions, voids and offline procedures. Maintains a high level of awareness and accuracy when handling bankable tenders., • Demonstrates a sense of urgency to efficiently perform their role. Maximizes productivity by executing all Store best practices and minimizing steps and touches in their work flow. Competencies: • Manages Work Processes., • Business Acumen., • Plans, Aligns & Prioritizes., • Builds Talent., • Collaborates., • Leading by Example., • Communicates Effectively., • Ensures Accountability & Execution. Qualifications And Special Skills Required: • Effectively communicate with Customers, Associates and Store Leadership in a friendly, respectful, cooperative and pleasant manner., • Ability to perform basic mathematical calculations commonly used in retail environments. Physical Requirements/Ada: • Ability to use all Store equipment, including PDTs, registers and PC as required., • Ability to spend up to 100% of working time standing, walking, and moving around the Store., • Ability to regularly bend at the waist, squat, kneel, climb, carry, reach, and stoop., • Ability to occasionally push, pull and lift more than 25 pounds., • Ability to use janitorial equipment, rolling racks, ladders and other assigned supplies., • Certain assignments may require other qualifications and skills., • Associates who work Stockroom shifts: Ability to regularly push, pull and lift more than 20 pounds. Supervisory Responsibilities: None DISCLAIMER: This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at management's discretion. Ross is an equal employment opportunity employer. We consider individuals for employment or promotion according to their skills, abilities and experience. We believe that it is an essential part of the Company's overall commitment to attract, hire and develop a strong, talented and diverse workforce. Ross is committed to complying with all applicable laws prohibiting discrimination based on race, color, religious creed, age, national origin, ancestry, physical, mental or developmental disability, sex (which includes pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), veteran status, military status, marital or registered domestic partnership status, medical condition (including cancer or genetic characteristics), genetic information, gender, gender identity, gender expression, sexual orientation, as well as any other category protected by federal, state or local laws. The base pay range for this role is $16.60 - $17.10. The base pay range is dependent on factors including, but not limited to, experience, skills, qualifications, relevant education, certifications, seniority, and location. The range listed is just one component of the total compensation package for employees. Other rewards vary by position and location. Benefits offered to all Associates include Accident, Critical Illness, Vision, Auto, Home, and Pet insurance programs; Associate Discount, Identity Protection, Associate Purchase Program, Benefit Hub Discount Mall, Employee Assistance Program and Commuter Benefits, 401K (service requirements), Employee Stock Purchase Program, Ross Cares Fund, College Discounts, Sick Pay (where legally required) and Referral Bonuses. In addition, all Full-Time Associates, including FT Retail Associate, Area Supervisor, Assistant Store Manager and Store Manager, are eligible for extended benefits offered including Medical/Dental/Vision Health Insurance, Legal Insurance, Vacation Buy, Flexible Spending Account, Health Savings Account, Life/ADD Insurance, Long-Term Disability, Enhanced Maternity and Parental Leave Benefit, Vacation Pay accrued at a rate of 10 days/year after eligibility commences, 9 Personal and Company Holidays. AS, ASM and SM Associates in Stores and Exempt Corporate and Buying Office roles are also eligible to receive a Bonus based on individual and business performance.

Job Description Job Summary: Responsible for washing and cleaning parts before shipping to customer or outside services. Pack parts or assemblies as required for storage/delivery. Help maintain product inventory. Essential Duties and Responsibilities: • Cleans parts prior to shipping as instructed., • Works with solvent and other cleaning chemicals (bleach, dish soap, etc.), • Deburr or polish parts as per routing or as instructed., • Works with steel wool, sandpaper, knives, and various deburr/polish equipment., • Sand blasts, paints and assembles parts., • Assists shipping department in maintaining inventory., • Assists shipping department in preparing parts for shipment to outside services or to the customer., • Keeps work area clean and organized. Additional Responsibilities: • When requested, may work on special projects and various related assignments., • May be required to work in various areas of operations when necessary., • Performs other related duties and assignments as required.Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee must also occasionally lift and/or move up to 30 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Prefer previous experience in a machine shop environment., • Good communication skills., • Must be able to take direction from various personnel., • Must be a good team player. This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job Description Lead High-Performance Manufacturing. Build Great Teams. Drive Operational Excellence. Are you an experienced CNC machining professional with a passion for leadership, precision manufacturing, and continuous improvement? Our client, a well-established precision manufacturing organization in the Rochester, NY area, is seeking a Production Supervisor to lead a skilled team of machinists while overseeing the day-to-day operations of a fast-paced shop environment. This is an outstanding opportunity for a hands-on manufacturing leader who enjoys mentoring employees, solving complex machining challenges, improving efficiencies, and ensuring the highest standards of quality for aerospace and other highly regulated industries. If you thrive in an environment where precision, accountability, innovation, and teamwork are valued, we'd love to speak with you, apply today! CNC Supervisor - (Aviation / Aerospace / Defense & Government Industry) Multiple Positions Available! Base Pay Rate: $70,000 to $100,000/yr. plus overtime compensation, and shift differential % for B shift only, on top of base rate. Position Type: Direct Hire Location: Rochester, NY Shift Schedule: Monday-Friday (A & B Shifts Available) Position: Full-TimeOvertime: Available, if needed A Shift: Monday through Friday (7 or 7:30AM) to (3:30pm or 4pm) est B Shift: Monday through Friday (3pm to 11:30pm) or (2:00pm to 10:30pm) Job Summary: As the CNC Supervisor, you will be responsible for the daily leadership, scheduling, technical support, performance reviews, meeting production timelines, and operational performance of the CNC Lathe machining department. You'll work closely with CNC Lathe Machinists, Swiss Operators, Programmers, Engineering, Quality, and Production scheduling team to ensure customer requirements are met while maintaining exceptional quality, safety, and productivity standards. Lead and supervise a team of CNC Lathe Operators, Setup Machinists, Programmers ensuring quality standards are being met. Conduct performance reviews, disciplinary actions, as needed, managing shift schedules, production floor scheduling assistance, as needed. Job Responsibilities: • Lead the daily operations of the machining Department to achieve production schedules, delivery commitments, and departmental performance goals., • Coordinate workflow, staffing, machine capacity, and priorities to maximize productivity while maintaining quality standards., • Monitor production throughout each shift and proactively address bottlenecks that could impact customer deliveries., • Evaluate workloads and adjust staffing and machine utilization based on changing production demands., • Track department performance using key production metrics and recommend improvements., • Ensure all machined components meet engineering drawings, customer specifications, and aerospace quality requirements., • Verify compliance with blueprint specifications, geometric dimensions and tolerance (GD&T), and process documentation., • Support first article inspections, in-process inspections, and final inspections as required., • Drive initiatives focused on reducing scrap, rework, and non-conforming product., • Promote a culture of quality and continuous process verification throughout production., • Provide day-to-day leadership, coaching, mentoring, and technical guidance to CNC machinists and operators., • Assign work based on production priorities, employee skill level, and machine availability., • Train new employees while supporting the continued development of experienced machinists., • Assist with employee performance evaluations, skill development plans, and cross-training initiatives., • Foster a positive, collaborative, and accountable team environment focused on safety, quality, and continuous improvement. Requirements • Must be able to Program, set up, troubleshoot, and optimize CNC Swiss Lathe machines for complex machined components., • Over 6 years of experience operating, setting up, and programming CNC Swiss Lathe machines., • 3 years of prior CNC Supervisory experience, required., • Skilled with precision measuring equipment and tools, required., • Must have prior supervisory experience responsible for managing various CNC shift schedules, ensuring coverage, performance reviews, training and mentoring machinists, ensuring quality output and machine uptime is being met., • Must be able to edit and improve CNC programs utilizing G-code and M-code while identifying opportunities to reduce cycle times and improve process efficiency., • Select appropriate tooling, cutting parameters, fixtures, and machining strategies to maximize productivity and tool life., • Troubleshoot machining issues, equipment malfunctions, tooling concerns, and process inconsistencies while minimizing downtime., • Partner with Manufacturing Engineering to improve machining processes, manufacturability, and production efficiency., • Able to read and interpret engineering blueprints, GD&T to meet customer specifications., • High School Diploma, GED, is required. Technical School or Vocational Training and/or Certification, desired., • Must be able to commute to the office daily. (Rochester, NY), • Able to read and interpret engineering blueprints and schematics. Total Rewards Include • Competitive base rate, based on experience, • Comprehensive Medical, Dental & Vision Insurance, • Company-paid Life Insurance, • 401(k) Plan, with employer matching contributions, • Paid Time Off and Paid Holidays, • Career advancement opportunities, • Ongoing technical training and professional development, • Modern, climate-controlled manufacturing facility, • Stable, growing organization serving highly regulated industries Apply Today! Equal Opportunity Employer: Cure Consulting Solutions, LLC is an Equal Opportunity Employer. We consider applicants for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, marital status, domestic violence victim status, or any other status protected by applicable federal, state, or local law. Reasonable Accommodation: Cure Consulting Solutions, LLC is committed to providing reasonable accommodation to qualified individuals with disabilities and disabled veterans in the job application process and, where appropriate, during employment. Applicants who require an accommodation to participate in the application or hiring process should contact Cure at support@cureconsultingsolutions.com. Pay Transparency: In accordance with New York State pay transparency requirements, the expected compensation range for this position is $70k/yr. to $100k/yr. The actual rate offered will be based on job-related factors such as experience, skills, qualifications, internal equity, and business needs. This position may also be eligible for benefits and employee perks in addition to base pay compensation. This job description is intended to describe the general nature and level of work performed by employees assigned and hired by our client as their employer for this role. It is not intended to be an exhaustive list of all responsibilities, duties, qualifications, or working conditions. Cure Consulting Solutions, LLC does not charge any recruiting or service fees to candidates; all fees are employer paid only.

Starbucks is seeking Baristas / Customer Service Representatives to prepare beverages, assist customers, and support daily store operations in a fast-paced coffee shop environment. Baristas are responsible for taking customer orders, operating the register, preparing coffee and espresso drinks, making cold beverages and food items, maintaining a clean work area, restocking supplies, and providing friendly customer service. Employees must follow Starbucks drink recipes, food safety guidelines, and customer service standards while working efficiently during busy periods. This position typically pays $15 to $20 per hour, and employees may also receive tips, overtime pay, holiday pay, and shift differential pay for early morning or holiday shifts. Baristas are responsible for preparing drinks to company standards, operating espresso machines, handling cash and card transactions, cleaning equipment, stocking cups and ingredients, assisting with drive-thru orders where applicable, and maintaining store cleanliness. Employees must work as part of a team to ensure orders are prepared quickly and accurately. Full-time and part-time employees may be eligible for benefits including health, dental, and vision insurance for eligible employees, 401(k) with company match, paid time off, Starbucks partner discounts, free drinks during shifts, tuition assistance programs, and opportunities for advancement into Shift Supervisor or Store Manager roles. Starbucks also offers tip sharing and potential performance-based raises.

Job Description Diesel/Automotive Technician I RTS Fleet (3rd Shift) Reports To: Fleet Maintenance Supervisor Salary Range: Starting Pay: $33.17 per hour | Top Rate Within 3 Years: $41.48 per hour Schedule: Sunday – Thursday, 11:00 p.m. – 7:30 a.m. Days Off: Friday & Saturday Union Representation: ATU Local 282 Make an Impact at RTS At Regional Transit Service (RTS), we connect our community to the people, places, and opportunities that matter most. With more than 1,000 employees serving eight counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders each year. As a Bus Technician / Mechanic I, you'll play an essential role in keeping our fleet operating safely and reliably by performing preventive maintenance, diagnostics, repairs, and overhauls on buses and support vehicles. Why Join RTS? Staying Healthy • Medical, Dental & Vision Insurance, • Flexible Spending Account (FSA) Feeling Secure • RTS Pension Plan, • NYS Deferred Compensation Plan, • Life, Disability & Supplemental Insurance, • Union representation through ATU Local 282 Work-Life Balance • Paid Time Off, • Paid Holidays, • Employee Assistance Program, • 24/7 Fitness Center, • Wellness Program, • Culture & Inclusion Council, • Public Service Loan Forgiveness (PSLF), • Employee Discounts & More Career & Professional Growth • Advance to top pay of $41.48/hour within 3 years, • Stable, consistent work with weekly pay, • Paid training on current vehicle technologies, • Tool allowance and boot allowance, • Opportunities for advancement within Fleet Maintenance About the Role The Bus Technician / Mechanic I is responsible for maintaining, diagnosing, repairing, and overhauling RTS buses and fleet vehicles to ensure safe, reliable service. This position performs preventive maintenance, troubleshooting, component replacement, and emergency repairs while maintaining high standards of safety and workmanship. What You'll Do • Maintain, repair, and overhaul RTS buses and fleet vehicles., • Perform inspections, diagnostics, and preventive maintenance., • Replace, adjust, and repair mechanical and electrical components., • Complete required test drives following repairs., • Operate diagnostic software and equipment, including Cummins InSite and Allison diagnostic systems., • Perform welding, brazing, and cutting torch work as required., • Operate tow trucks and respond to road calls when assigned., • Report safety concerns, equipment defects, and maintenance issues to supervisors., • Maintain accurate maintenance documentation., • Perform other duties as assigned. What We're Looking For Required Qualifications • Two (2) years in an accredited diesel mechanics program or comparable technical coursework; OR • Equivalent verifiable work experience (two years of work experience may substitute for one year of education)., • Must provide own tools., • Must obtain a New York State CDL Class B permit with passenger and air brake endorsements prior to employment., • Must obtain a CDL Class B license within 90 days of hire., • Must obtain a CDL Class A permit with towing endorsement (may be obtained after hire)., • Must obtain a CDL Class A license within 90 days of receiving the permit., • Must successfully complete a post-offer physical examination., • Must be able to read, write, and communicate effectively in English for safety, communication, and use of technical manuals. Preferred Qualifications • Experience maintaining heavy-duty diesel vehicles or transit buses., • Experience using computerized diagnostic systems., • Welding and fabrication experience., • Commercial fleet maintenance experience. Knowledge, Skills & Abilities • Knowledge of diesel engine repair and preventive maintenance practices., • Ability to diagnose and repair mechanical, hydraulic, pneumatic, and electrical systems., • Proficiency using computerized diagnostic equipment., • Ability to safely operate shop equipment and towing vehicles., • Strong troubleshooting and analytical skills., • Ability to work independently and collaboratively., • Strong communication and customer service skills., • Commitment to safe work practices and quality workmanship. Working Conditions & Physical Requirements The physical demands described are representative of those required to successfully perform the essential functions of this position. Reasonable accommodations may be made for qualified individuals with disabilities. • Frequently required to stand, walk, reach, use hands, talk, and hear., • Occasionally required to sit, climb, balance, stoop, kneel, crouch, or crawl., • Frequently lift or move up to 20 pounds., • Occasionally lift or move up to 75 pounds., • Must possess close, distance, color, peripheral, and depth vision with the ability to adjust focus., • Regularly works around moving mechanical equipment., • Frequently works outdoors in varying weather conditions., • Occasionally exposed to wet or humid environments, fumes, airborne particles, vibration, and chemicals., • Work environment includes moderate to loud noise levels. Equal Employment Opportunity Rochester Genesee Regional Transportation Authority (RGRTA) is committed to providing equal employment opportunities to all applicants and employees without regard to race, color, religion, national origin, citizenship or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic protected by applicable federal, state, or local law. RGRTA will provide reasonable accommodations to qualified applicants and employees with known disabilities unless doing so would impose an undue hardship on the operation of the organization. For safety-sensitive positions, RGRTA maintains a drug- and alcohol-free workplace in accordance with Department of Transportation (DOT) and Federal Transit Administration (FTA) regulations. Applicants for safety-sensitive positions must successfully complete a pre-employment drug test and receive a verified negative test result before performing safety-sensitive functions. Employees in these positions are also subject to additional drug and alcohol testing throughout their employment as required by applicable regulations. As required by law, RTS tests for a variety of substances, including cocaine, amphetamines, opioids, phencyclidine (PCP), and marijuana metabolites. Please be aware that marijuana can remain detectable in the body for an extended period of time—sometimes more than 30 days—and may result in a positive drug test long after use.

Job Description Job Summary: Working from given instructions, will load programs into the controller, review the program and do intermediate setup of machine tools through first piece inspection approval. Essential Duties and Responsibilities: • Accountable for manufacturing complex parts and machine maintenance., • Able to control product quality during production runs using calipers, dial bore gages, micrometers, etc., • Measure and work with tight tolerance in accordance with control plan and blueprint., • Good working knowledge of proper machine operation and safety., • Manufacture product with tight tolerance in accordance with CAD models and blueprints., • May work with prototypes for potential future work., • Must be able to develop and machine basic fixtures with or without prints., • Keeps work area clean and organized., • Must be able to change tools and offsets. Additional Responsibilities: • When requested, may work on special projects and various related assignments., • May be required to edit programs at machine., • May be requested to instruct other personnel on the machine operation., • May be required to work in various areas of operations when necessary., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 50 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Minimum of 5 years experience in a machine shop environment., • Knowledgeable on set-ups, lathes and mills., • Understand GD&T and shop math., • Ability to read and understand cad-cam software., • Familiar with G and M codes., • Good communication skills., • Must be a good team player. This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job Description Turn electrical schematics into finished products that power real-world applications! As a Panel Technician, you'll build and wire custom industrial control panels and OEM equipment alongside a team committed to quality and craftsmanship. Full-time, on-site. Monday - Friday. 7 AM - 3:30 PM. Panel Technician Primary Function • Build and wire custom industrial control panels as well as OEM products as assigned by the Panel Shop Supervisor, within schedule provided. $18 - $22/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • EAP, • 401K, • ESOP (Employee Stock Ownership Plan) Panel Technician Essential Responsibilities • Build Custom Industrial Panels and OEM products meeting delivery dates, • Work independently with the project folder and design schematics to complete your responsible job., • Account for parts required for the job, • Mechanically layout and mount hardware components., • Wire complete panel in accordance with PFT panel procedures, UL508A specifications, and other best practices as given by the panel shop supervisor., • In large project situations work with other technicians in a team effort, • Test Custom Industrial Control Panels and OEM Products, • Point to Point wire tests in accordance with PFT testing procedures, • Torque check and marking in accordance with PFT procedures, • Be able to perform and fill out the PFT Panel Final Check list, • Maintain a neat and orderly work area at all times, • Organize and maintain shop tools and equipment, • Organize and maintain personal tools, • Organize and maintain your project items and materials, • Help maintain common shop supplies IE Labels, wire ties, wire, etc., • Assist Apprentices and other Technicians in techniques and procedures Panel Technician Necessary Qualifications • Basic Knowledge of Electrical Theory, • BOCES Electrical or AS in an Electrical Technology Field preferred, • Ability to read and interpret electrical schematics and mechanical drawings, • Must be able to follow and understand the PFT Shop Guidelines, • Ability to read and interpret technical manuals, • Ability to work with other Technicians and Apprentices in a professional manor, • Competent with the use of hand tools, i.e. jigsaw, drills, wrenches, screwdrivers, • Competent with the use of electrical test equipment, i.e. Multi meter, • Valid and Clean Driver's License Physical Requirements • Ability to stand for up to 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Candidates need a clean and valid driver's license to operate company vehicles. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Position Summary: As a technician II, you are a crucial part of our production team. Responsible for performing high-quality vehicle upfitting tasks to meet customer specifications and industry standards. Your role includes installing, modifying, and testing equipment on commercial vehicles with precision and efficiency. By ensuring excellence in your work, you contribute directly to the satisfaction of our customers and the success of our operations. Essential Duties and Responsibilities: Vehicle Upfitting • Perform installations and modifications on commercial vehicles, including electrical, mechanical, and structural upfits., • Follow work orders, blueprints, and technical specifications to complete assigned tasks accurately., • Operate tools and equipment safely and efficiently to ensure quality workmanship. Troubleshooting and Problem Solving • Identify and resolve technical issues during the installation or modification process., • Conduct functional tests to verify that all installed components operate correctly and meet requirements., • Report and address any discrepancies or challenges encountered during projects. Quality Assurance • Inspect work to ensure it meets company and customer standards for quality and functionality., • Maintain attention to detail to prevent rework or defects., • Document completed tasks and maintain accurate records as required. Team Collaboration • Work closely with fellow technicians, the Lead Technician, and other departments to complete projects on time., • Communicate effectively to ensure alignment of project requirements and expectations., • Provide input on potential improvements to processes and workflows. Safety and Compliance • Adhere to all safety protocols and guidelines to maintain a safe work environment., • Use personal protective equipment (PPE) and follow company policies to minimize risk., • Stay informed about regulatory requirements and industry standards. Expectations and Success Metrics • Complete assigned tasks accurately, on time, and to quality standards., • Contribute to a safe, clean, and organized work environment., • Demonstrate reliability, teamwork, and a positive attitude in all responsibilities., • Continuously improve technical skills and adapt to new tools and processes. Experience • 10+ years of experience in a similar field required., • May accept candidates with 5-7 years of experience with advanced certifications or specialized skills., • Strong understanding of the industry, vehicle upfitting processes, tools, materials, and best practices in a production environment., • Advanced 12v electrical skills, • 5+ years of welding and fabricating experience, • 1-2 years’ experience with hydraulics, • Must be familiar with gasoline, diesel, and light/medium trucks, as well as construction or commercial equipment., • Quality control and inspection skills, including defect detection and corrective action, • Familiarity with shop leadership or team coordination, such as leading work activities in the absence of a supervisor., • Ability to read and interpret blueprints, technical drawings, and shop specifications. Education Degree/Certificate in Automotive Field or related field preferred but not required. Physical Demands While performing the duties of this job, the employee is regularly required to stand. The employee may occasionally lift and/or move up to 50 pounds. Work Environment The noise level in the work environment is typically moderate. Compensation Paid Weekly. Schedule May involve extended hours depending on business needs. Monday through Friday. Location In-Person.

Job DescriptionDescription: Tokai Carbon GS is looking to add to its world class team of highly trained and skilled personnel. We provide carbon and graphite solutions for Aerospace, EDM, Fuel cell and Semiconductor markets. Tokai Carbon GS has earned a reputation for leading the industry in precision manufacturing. Essential Functions: • Setup, and operate CNC mills to produce any given product to a customer’s specification on dimensions, functionality, quality, and delivery., • Comply with all safety regulations, • Maintain a safe working environment that is organized, clean, and free from debris, • Perform periodic preventative maintenance on equipment being used, including daily cleaning and daily maintenance checklists, • Perform all delegated tasks from CNC Supervisor, • Suggest ideas to better work environment and/or increase efficiency of workflow, • Perform inspections on all products to ensure product quality before it reaches the Quality department., • Work with CAD to facilitate the production of products, • Actively seek out extra work, • Work with department supervisor to ensure smooth flow between other departments during multi-departmental jobs., • Maintain tooling in organized manner. Inspect tooling before use to ensure quality product is produced., • Clear understanding of offsets, fixturing, and programming techniques, • Good skills with conventional inspection equipment. CMM experience/knowledge preferred., • Excellent math skills, • Good oral and written communication skills, • Good organizational skills, • Good customer service skills, • Perform all required scribing and hand working., • Maintain a through in-process inspection for all jobs. Compensation & Benefits Individual compensation packages are based on a variety of factors unique to the candidate, including skill set, experience, qualifications, and other job-related reasons. A reasonable estimate of the compensation range for this position is $25.00-$30.00 per hour, plus Shift Differential. We offer competitive salaries that are in line with or above industry standards and an extensive benefits package including: • Health insurance, • Company Paid Dental, and Vision, • Company Paid Life Insurance, • Company Performance Based Bonus, • Shift Differentials, • Paid Time Off, • 10 Paid Holidays, • Onsite Fitness Center, • 401(k), • Employee assistance program, • Health savings account, • Referral program, • Tuition reimbursementRequirements:, • Minimum 2 years CNC Programming experience, • Minimum 3 years lathe experience; 3 years on CNC Lathe, • Blueprint reading skills, • Able to setup and run concurrent jobs on multiple machines, • Able to use standard measuring equipment such as micrometers, comparators, • Strong Shop math skills, • Able to work to metric dimensions, • Experience with Lean manufacturing principles and ISO quality systems

Job Description Kamco Supply is a 2nd Generation owned company that started 35 years ago in 1 location in Connecticut. It has grown to 9 branches from Buffalo NY to Cranston RI with a current fleet of 75 trucks of which 35 are boom truck and 3 are 8 story booms and over 500,000sf of warehouse/showroom space. SUMMARY: The job responsibilities for this position include all aspects of the preparation of hollow metal/stainless steel doors and panels including door hardware preps (locks, hinges, strikes, closers, etc.), door lite preparation (cutting opening, kit installation, glazing, etc.), installing reinforcements, custom sizing of doors, and metal work. More specifically, the job activities include interpretation of shop orders, shop drawings and hardware templates to prep door/panel components to specifications. The prepping process includes arc welding, cutting, grinding/polishing, cleaning of metal, touch-up spray painting, cutting and installing glass and packaging. Other activities include: fork lift operation, raw material inventory management and other material handling activities. Maintain 5-S standards and housekeeping of Door Shop area along with tools and workbenches. Also expected to actively support and participate in Continuous Improvements activities by applying Lean Manufacturing tools to daily activities, such as warehouse, inventory management and other material handling activities. ESSENTIAL DUTIES AND RESPONSIBILITIES: Including but not limited to: • Identifying and obtaining pertinent information from shop orders, shop drawings and hardware templates regarding hardware and manufacturing specifications., • Set-up and operation of various bench and hand power tools including bench and hand grinders, cut-off saws, band saw and plasma cutting torch., • Set-up and operation of and arc welding equipment in prepping and modifying metal doors/panels and their components and other light gage sheet metal. Cuts door down in size with power hand saw and cuts preps with other power tools., • Working with variety of materials including: sheet metal, body putty, sanding/grinding and spray painting of metal doors sheet steel and caulks and glass., • Working safely and maintaining consistent quality of work at efficient productivity rates. Safe operation of fork lifts for movement of materials., • Maintain accurate paper work and record keeping for production history and for inventory control., • Accurately pulling and marking doors required for job., • Welds in flat, horizontal and possibly vertical positions. Manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle., • Grinds welds and body putty repairs flush and smooth, with proper feathering of affected area to flat surfaces. Clean and prep doors for prime paint touch-up, if applicable by sanding marks and damage and removing weld spatter and grinding dust., • Effectively communicating with supervisor/lead person, co-workers, office personnel and internal customers. Actively participate in door and process design and improvement activities., • Assisting in other operations, as needed, including warehouse support, special project installations and other production area support. COMPETENCIES: To perform the job successfully, an individual should demonstrate the following: • Analytical: Synthesizes complex or diverse information; Uses intuition and experience to complement data., • Design: Translates concepts and information into images; Uses feedback to modify designs; Demonstrates attention to detail., • Problem Solving: Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Technical Skills: Strives to continuously build knowledge and skills; Shares expertise with others., • Interpersonal Skills: Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication: Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings., • Written Communication: Able to read and interpret written information., • Teamwork: Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed., • Quality Management: Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness., • Cost Consciousness: Develops and implements cost saving measures., • Organizational Support: Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values., • Judgement: Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process., • Motivation: Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence., • Professionalism: Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Quality: Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity: Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Safety and Security: Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions ; Uses equipment and materials properly., • Adaptability: Adapts to changes in the work environment; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality: Is consistently at work and on time., • Dependability: Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals.; Completes tasks on time or notifies appropriate person with an alternate plan., • Initiative: Looks for and takes advantage of opportunities; Asks for and offers help when needed., • Innovation: Meets challenges with resourcefulness; Generates suggestions for improving work. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Education / Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience., • Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to other employees of the organization., • Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to calculate figures and amounts such as area, circumference, and volume. Ability to apply concepts of basic geometry., • Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • To perform this job successfully, employee must be willing to:, • Work with minimal supervision., • Work individually and with others., • Participate in problem solving and Lean Activities and identification of unsafe conditions related to job., • Learn and understand basic principles of metal forming., • Perform other activities as requested by supervisor and/or lead person. CERTIFICATES, LICENSES, REGISTRATIONS: Forklift Safe Operation Certificate is required through internal training and certification. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, bend, use hands to finger, handle, or feel; and reach with hands and arms, perform low level activity and grip up to 35# force. Occasionally sit, lift up to 90# Floor to 36", lift up to 30# Waist to 79" push/pull up to 110# on Hand Truck vertical pull up to 65#, climb/step up 19". Heavier loads are typically handled with OH cranes and other lifting devices. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts of machinery and hand power tools and sharp edges on material. The employee is occasionally exposed to risk of electrical shock, risk of radiation (in the electromagnetic fields around the welding equipment), and vibration from hand power tools. The noise level in the work environment is usually very loud. The employee is occasionally exposed to fumes or airborne particles. Employees are required to wear protective clothing, steel toe safety shoes, safety glasses and ear plugs in designated work areas.

Build customer relationships while creating a memorable framing solution for their art. Help customers shop our store and be able to find what they're looking for. Provide a safe, clean and clutter-free environment. Adhere to Standard Operating Procedures (SOP's) and Company programs to ensure compliance to applicable laws and requirements; execute Company policies and standards Embrace and execute personal designer by using Elevated ABC Deliver to build relationships with all customers while creating Custom Framing solutions. Deliver sales and production results Complete framing orders with a high degree of quality and on time Maintain the ready made frame department and other assigned areas including SISO and Directed Replenishment Deliver friendly customer service; help customers shop and find what they are looking for; provide a well merchandised and in-stock store for the customer to shop Follow Standard Operating Procedures (SOPs) and Company programs Support shrink and safety programs Interacts with others in an accepting and respectful manner; remains positive and respectful, even in difficult situations; promotes commitment to the organization's vision and values; projects a positive image and serves as a role model for others Participate in the truck un-load and stocking processes to ensure truck standards are followed and completed within budget Operate cash register and execute cash handling to standards Acknowledge customers, help locate product and provide solutions Assist with Omni channel processes Basic computer skills and basic measuring skills Ability to operate the framing equipment and glass cutter Retail experience Experience selling products and/or services to customers Regular bending, lifting, carrying, reaching and stretching Ability to move throughout the store Ability to remain standing for long periods of time Lifting heavy boxes and frames and accessing high shelves by ladder or similar equipment If you need help performing these functions of your job, please contact supervisor so that we may engage in the interactive process with you and find a reasonable accommodation Public retail store setting taking care of our customers; all public areas are climate controlled; some stock rooms may not be climate controlled; some outdoor work if assigned to retrieve shopping carts or while unloading trucks; Frame shop contains glass cutter and heat press; work hours include nights, weekends and early mornings Total Base Pay Range for this Position: $16.25 - $19.10 This position may be eligible for overtime compensation in accordance with state and local laws.

Job Description American Greetings is a global leader in the Celebrations marketplace. Celebrate with us and join our team today! As a Retail Fixture / Installation Crewmember with American Greetings, you’ll be a vital part of our company’s purpose; To make the world a more thoughtful and caring place. We are looking for motivated and energetic crew members to join our team to assemble, construct, and tear down greeting card fixtures in retail locations. Pay • The starting pay is $17.60 per hour with two increases during the first year of employment (the listed rates are subject to change based on work location), • After 6 months of employment the pay rate will increase to $18.60., • After 1 year of continued employment the pay rate will increase to $19.50., • Paid travel time to the job site when traveling in a company vehicle, • Hotel and a per diem are paid for overnight travel, • Full Training: all necessary tools are provided -Ability to speak, read, write, and understand English is required -401(k) with company match Location Based out of Rochester, NY. Hours The weekly average hours are 10 hours per week. The weekly hours may increase to an average of 30 hours per week around holidays. Primary Responsibilities: • Construct greeting card shelves, racks, and displays, • Ability to connect with team members and store associates effectively, • Follow instructions along with planograms/diagrams, • Assist the Installation Supervisor in gathering and movi \nCompany Description As the leader in meaningful connections, American Greetings is committed to making the world a more thoughtful and caring place. Founded in 1906, the creator and manufacturer of innovative social expression products offers paper cards, digital greetings, gift wrap, party goods and more to help consumers honor the people and moments in life that really matter. The Company's major greeting card brands are American Greetings, Papyrus, Recycled Paper Greetings and Carlton Cards. AmericanGreetings.com lets consumers shop and buy paper cards, ecards, printables, party supplies and gift wrap — along with providing useful content that educates and inspires visitors to connect more meaningfully. The 113 year-old Company is headquartered in Cleveland, Ohio, and its products can be found in retail outlets worldwide.

Deliver friendly customer service, help customers shop our store, and find what they're looking for. Ensure all customers receive a fast and friendly checkout experience. Complete truck unloading and merchandise duties throughout the store including maintaining store recovery standards to deliver our Brand Promises. Help customers shop, locate products, and provide them with solutions Provide a fast and friendly checkout experience; execute cash handling to standards Engage customers on the benefits of the Rewards program and Private Label Credit Cards and complete enrollments Educate customers on the Voice of Customer (VOC) survey Assist with Omni channel processes, including Buy Online Pickup in Store (BOPIS) and Ship From Store (SFS) Participate in the truck unload, stocking, and planogram (POGs) processes Responsible to complete merchandise recovery and maintenance including the merchandise return / go back process and general store recovery to ensure a well-merchandised and in-stock store Perform Store In Stock Optimization (SISO) and AD set duties as assigned Support shrink and safety programs Adhere to Standard Operating Procedures (SOPs) and Company programs to ensure compliance with applicable laws and requirements; execute Company policies and standards Interact with others in an accepting and respectful manner; remain positive and respectful, even in difficult situations; promote commitment to the organization's vision and values; project a positive image and serve as a role model for other Team Members Cross trained in Custom Framing selling and production Other duties as assigned Preferred Knowledge/Skills/Abilities Preferred Type of experience the job requires Retail and/or customer service experience preferred Physical Requirements Work Environment Ability to remain standing for long periods of time Ability to move throughout the store Regular bending, lifting, carrying, reaching, and stretching Lifting heavy boxes and accessing high shelves by ladder or similar equipment If you need help performing these essential functions of your job, please contact your supervisor so that we may engage in the interactive process with you to determine if a reasonable accommodation is available. Public retail store setting taking care of our customers; all public areas are climate controlled; some stock rooms may not be climate controlled; some outdoor work if assigned to retrieve shopping carts or while unloading trucks; Frame shop contains glass cutter and heat press; work hours include nights, weekends and early mornings Applicants in the U.S. must satisfy federal, state, and local legal requirements of the job. Michaels requires all team members in this role to be at least sixteen (16) years or older. Total Base Pay Range for this Position: $16.00 - $18.80 This position may be eligible for overtime compensation in accordance with state and local laws. Michaels offers a range of benefits to support team members and their families. Depending on position and eligibility, team members may have access to a 401(k) with employer match, an Employee Assistance Program, medical, dental, and vision coverage, telemedicine services, flexible spending accounts, commuter benefits, tuition assistance, adoption assistance, and various voluntary insurance options. All team members enjoy everyday perks such as employee discounts and access to partner discount programs. For a summary of benefits, visit the Michaels Benefits at a Glance page. For additional information regarding benefits, visit MIKBenefits.com. Michaels is an Equal Opportunity Employer. We are here for all Team Members and all customers to create, innovate and be better together.

Whether you're an experienced professional, a recent college graduate or somewhere in between, IDEX is a place where you can apply your existing skills and learn new ones in an environment where you can make an impact. With interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses around the globe, chances are, we have something special for you. Job Location: Rochester, NY Reports To: Coating Maintenance Supervisor Hours: B-Shift 2pm - 10:30pm ITAR/EAR Criteria: Certain positions with IDEX Corporation and its business units require access to controlled goods and technologies subject to the International Traffic in Arms Regulations or the Export Administration Regulations. Applicants for these positions may need to be "U.S. Persons," as defined in these regulations. Generally, a "U.S. Person" is a U.S. citizen, U.S. national, lawful permanent resident, or an individual who has been granted refugee or asylum status. IDEX Materials Science Solutions (MSS) is a business platform within IDEX Corporation that brings together a portfolio of industry-leading companies specializing in advanced materials, precision manufacturing, optics, coatings, ceramics, and engineered components. Serving customers in the semiconductor, space and defense, and precision forming industries, IDEX MSS partners with OEMs to solve complex engineering challenges through innovative materials science expertise and coordinated global support. From concept development and prototyping to high-volume production, the organization delivers high-performance, mission-critical solutions that enable customers to advance cutting-edge technologies and achieve reliable, scalable results. IH&S is currently looking for a hands-on Maintenance Technician to support its thin-film coating operations, CNC machining, and production machining environment. The right candidate will have significant experience with thin film coating technologies, hardware and associated vacuum systems and electronics. Support the thin-film coating operation with vacuum equipment and electronics expertise; Real-time troubleshooting of coating issues based on root cause assessment; Support off-line improvement projects as related to maintenance, uptime and MTBF; Support facility systems as needed; Work with engineering and manufacturing to improve process and equipment reliability. Support equipment in other departments related to the thin-film coating operations (ex. Glass Shop). *Key success criteria for this position are: Coating machine uptime and factory overall efficiency (FOE) defined as the product of yields, cycle time and uptime normalized to theoretically achievable goals. A minimum of a 2-year technical degree and 3+ years experience with high-vacuum deposition, or 6+ years relevant experience; Direct experience with ion sources and electron guns; desirable; Direct experience with the repair, diagnostics and root-cause analysis of vacuum coating equipment issues; Formal electronics and vacuum training desirable; Experience with facility systems, including HVAC, compressed air, and chilled-water systems desirable; Experience using measurement systems as applied to thin film coating production, such as spectrophotometers, interferometers, oscilloscopes and other electrical, optical and mechanical test equipment Strong written and oral communication skills; Proficiency with MS office; Basic understanding of computer hardware and interfaces; Willingness to work flexible work hours including weekends and/or holidays. The right candidate will have a clear desire to succeed and be effective working in a fast-paced environment. On a personal level, the candidate will exhibit the highest standards of integrity, deliver upon all commitments, and be a highly motivated, team player. IDEX Materials Science Solutions, a Unit of IDEX Corporation is an Equal Opportunity Employer Are you ready to join a different kind of company where our people, our culture, and our commitments are centered around providing trusted solutions that improve lives around the world? The compensation range for this position is $48,000.00 - $72,000.00, depending on experience. This position may be eligible for performance based bonus plan. Our comprehensive U.S. benefit offerings include: Health benefits, 401(k) retirement savings program with company match, PTO, and more. More information on our benefits and rewards can be found on our career page. IDEX is an Equal Opportunity Employer. IDEX gives consideration for employment to qualified applicants without regard to race, color, religion, creed, genetic information, sex, sexual orientation, gender identity or expression, marital status, age, national origin, disability, protected veteran status, or any other consideration or protected category made unlawful by federal, state or local laws. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact our Talent Acquisition Team at lfcareers@idexcorp.com for assistance with an accommodation. These contact tools may be used only by individuals with a disability for accommodation requests. Do not inquire as to the status of an application. This posting is for an existing vacancy. Artificial intelligence is not used to screen, assess or select applicants.

The Greece Central School District believes that all students benefit from a culture where diversity, inclusion, and equity with excellence are valued. Greece Central School District welcomes stakeholders who can collaborate with other staff to ensure that our policies, regulations, practices, programs and services promote equity, inclusion, and diversity. Salary: $25.00/Hour Minimum Teamsters Contract Bargaining Unit Teamsters Report Times: 9:30am - 6:00pm Daily Hours: 8.5 (.5 Unpaid Lunch) Work Year: 52 Weeks Supervisor: Bus Operations Supervisor Garage Civil Service Title: Senior Automotive Mechanic Minimum Requirements: Graduation from high school or possession of a high school equivalency diploma, plus EITHER: (A) Graduation with an Associate's degree or possession of a certificate, either of which must be in an automotive field, plus six (6) months of paid full-time or its part-time equivalent experience as an automotive mechanic; OR, (B) One (1) year paid full-time or its part-time equivalent experience as an automotive mechanic; OR, (C) An equivalent combination of education and experience as defined by the limits of (A) and (B) above. NOTE: Your degree must have been awarded by a college or university accredited by a regional, national, or specialized agency recognized as an accrediting agency by the U.S. Department of Education/U.S. Secretary of Education. If your degree was awarded by an educational institution outside the United States and its territories, you must provide independent verification of equivalency. A list of acceptable companies who provide this service can be found on the Internet at http://www.cs.ny.gov/jobseeker/degrees.cfm. You must pay the required evaluation fee. Desired Qualifications: Thorough knowledge of hydraulics and diesel and gasoline engines; Good knowledge of State Department of Transportation rules and regulations governing the repair and maintenance of buses; Ability to diagnose problems of all systems, diesel engine, air brakes, and hydraulics; Possess valid CDL-B with PS Endorsement by the end of probationary period; Minimum of five years experience in school bus or heavy truck repairs and maintenance; Good knowledge of the principles of heavy equipment mechanics including systems and parts operations, systems and parts interrelationships, and systems and parts functions; Good knowledge of the methods and practices involved in repairs to heavy equipment; Good knowledge of shop equipment, tools, electronic diagnostic equipment, parts and their potential use; Working knowledge of the mechanical operation and terminology of school buses; Ability to establish and maintain effective working relationships with co-workers, supervision, and District administration. Position Summary/Responsibilities: Performs heavy equipment and automotive repairs to gasoline, diesel engines, and hydraulic systems; Repairs and rebuilds all automotive systems such as cooling, electrical, exhaust, steering and suspension, fuel system, brake, and drive train; Repairs preventative maintenance functions including lubrication, fluid checks, minor tune-ups and safety inspections of trucks, buses, and other heavy equipment; Operates machine shop equipment such as grinder, drill presses and other working machine to make, rebuild or repair parts for automotive equipment; Diagnoses chronic automotive problems caused by maladjustments, worn, damaged, or defective parts; Performs New York State authorized inspections of all District owned vehicles; May be asked to drive a school bus with children on occasion; Other duties as assigned. Questions regarding this posting should be directed to: Name: David Richardson Title: Exec Dir Student Operations Email: david.richardson@greececsd.org

GENERAL PURPOSE: The Area Supervisor is a member of the Store Leadership who is responsible for a specific, assigned area of the Store as well as the general operations and supervision of the Store when functioning as the Manager on Duty. Area Supervisors are responsible for opening and closing the Store, supervising Associates, and maintaining a friendly, easy to shop environment. They ensure proper merchandise presentation, and maintain a clean work area at all times. Area Supervisors are also responsible for executing and supervising Company operational processes as needed. ESSENTIAL FUNCTIONS: • Maintaining Safe & Secure Environments: Understands that safety is the number one priority and practices safe behaviors in everything they do. Maintains a high level of awareness on the sales floor to create a safe and secure shopping environment for everyone. Immediately corrects or reports any unsafe conditions or practices to Store Leadership. Responsible for security of building including entrance/exit control (Associate entry/egress, receiving door, daily trash removal, etc.), Electronic Article Surveillance (EAS) devices daily function check, Cash Office security, armored carrier pick-ups and register area. Removes clutter and ensures safe, clear egress to emergency exits. Responsible for Customer safety including accident prevention, accident reporting and emergency procedures. Tests all fire alarm systems as scheduled. Responds to after-hours alarms when requested., • Customer Service: Treats all Customers, Associates, and other leaders with respect. Demonstrates courtesy, friendliness, and professionalism at all times. Recognizes Associates using Company recognition programs. Personal and Store Brand Represents and supports the Company brand at all times. Maintains a professional appearance, in accordance with Company Dress Code. Ensures all Associates adhere to the Company Dress Code at all times. Keeps all areas of the Store clean, well-maintained, and merchandised to standard. Responsible for daily trash removal., • General Merchandising: Ensures recovery, sizing and markdowns are completed to Company standards through teaching, assigning tasks, and following up per Company best practice. Responsible for receiving merchandise truck when needed. Processes all merchandise with a sense of urgency. Responsible for receipt of all non-merchandise inbound deliveries (i.e. signs, supplies, special deliveries, etc.). Responsible for cleanliness and organization of all Stockrooms. Helps deliver and place merchandise on sales floor when all merchandise is processed. Responsible for ensuring any back-stock is secured and processed to Company policy. Responsible for merchandising of department including the back stock. Responsible for the reduction of loss due to damage. Ensures compliance to the monthly presentation guidelines in assigned area. Responsible for floor moves and signing including promotional signing as needed. Responsible for re-wraps as needed., • Loss Prevention: As a representative of Ross Leadership, demonstrates integrity and honesty in all interactions with Associates and Customers. Safeguards confidential information, cash and credit card information and merchandise. Ensures Public View Monitor (PVM) system is maintained properly. Conducts "Code 50" package inspections. Executes all Company Best Practices and maximizes productivity by minimizing steps and touches while working., • Front End Supervision and Operations: Executes all Company Best Practices and maximizes productivity by minimizing steps and extra touches when working. Ensures Associates are executing to Company standards at the Front End. Maintains pace, energy and "presence" at the Front End, managing the line to expedite Customers wait time Trains and coach Associates on cash registers, shortage control policies and other Front End procedures. To meet friendly and productivity standards. Controls Retail Associates' break schedule for backups, lunches and breaks. Ensures all equipment is working properly. Maintains proper supplies and recovery for the Front End area. Ensures go backs are expedited, properly scanned, security tagged and ticketed. Teaches all Associates the "Scan and Bag" best practice. Ensures salability of merchandise on the Front End, aisle tables, Men's/Women's 4-way features, and specialty racks., • Fitting Rooms: Responsible for the maintenance and cleanliness of the Fitting Rooms. Ensures all Fitting Room garment tags are audited and accounted for to Company policy. Ensures go-back compliance throughout the day. All merchandise returned to the sales floor must be ticketed, scanned, nubbed and security tagged as needed., • Administrative Duties as Assigned by Store Manager: Ensures Cash pulls and bank deposits are conducted to Company policy. Responsible for Front End control when needed. Understands and adheres to the policies and procedures that refer to refund approval, Associate purchase approval, securing tills and cash in safe, register Paid Outs/Ins, void approval, register media and break schedules. Responsible for payroll administration including daily punch edits, Associate scheduling compliance, Sunday payroll transmission and Payroll reporting as needed. COMPETENCIES: Manages Work Processes Business Acumen Plans, Aligns & Prioritizes Builds Talent Collaborates Leading by Example Communicates Effectively Ensures Accountability & Execution QUALIFICATIONS AND SPECIAL SKILLS REQUIRED: Excellent verbal communication skills. Fluency in English. Prior Customer Service and supervisory experience preferred. Familiarity with point-of-sale equipment and applications. Ability to perform basic mathematical calculations commonly used in retail environments. Ability to work evenings and weekends. PHYSICAL REQUIREMENTS/ADA: Ability to use all Store equipment, including PDTs, registers and PC as required. Ability to spend up to 100% of working time standing, walking, and moving around the Store. Ability to regularly bend at the waist, squat, kneel, climb, carry, reach, and stoop. Ability to occasionally push, pull and lift more than 25 lbs. Ability to use janitorial equipment, rolling racks, ladders and other assigned supplies. Certain assignments may require other qualifications and skills. Associates who work Stockroom shifts: ability to regularly push, pull and lift more than 20 lbs. SUPERVISORY RESPONSIBILITIES: Retail Associates Stockroom Leads (where applicable) DISCLAIMER This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at management's discretion. Ross is an equal employment opportunity employer. We consider individuals for employment or promotion according to their skills, abilities and experience. We believe that it is an essential part of the Company's overall commitment to attract, hire and develop a strong, talented and diverse workforce. Ross is committed to complying with all applicable laws prohibiting discrimination based on race, color, religious creed, age, national origin, ancestry, physical, mental or developmental disability, sex (which includes pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), veteran status, military status, marital or registered domestic partnership status, medical condition (including cancer or genetic characteristics), genetic information, gender, gender identity, gender expression, sexual orientation, as well as any other category protected by federal, state or local laws. COMPENSATION The base pay range for this role is $18.00 - $18.50. The base pay range is dependent on factors including, but not limited to, experience, skills, qualifications, relevant education, certifications, seniority, and location. The range listed is just one component of the total compensation package for employees. Other rewards vary by position and location. Primary Location: New York-Monroe-Rochester-Market Place Commons NY Work Locations: Market Place Commons NY 2335 Marketplace Drive Rochester 14623 Schedule: Regular Standard Job Type: Full-time Job Posting: May 4, 2026

Job Description Dave's Hot Chicken in Henrietta Now Hiring Team Members Starting at $17 per hour with Immediate Growth Opportunities Summary: The Team Member is responsible and accountable for performing specific tasks and duties assigned within the Restaurant including Guest Service, Food prep, Restaurant Cleanliness and Teamwork. Job Expectations: The Team Member will work productively in a fast-paced environment, maintain a fast speed of service, interact with Guests, work closely with other Team Members to complete tasks, follow all safety and security procedures, and conduct other duties assigned by the Restaurant Management Team. Duties: • Follow the steps outlined in the DHC Training Program to learn new skills, duties, and responsibilities, • Abide by the rules and direction given by the Restaurant Management Team and refrain from insubordination, • Communicate to their immediate supervisor when additional training guidance and practice is needed, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Work together with other Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Communicate effectively with Team Members and Management to resolve any interpersonal issues as needed, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness daily by clearing tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs and effectively uses all products, supplies, and equipment facilities, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance results Requirements: • Must be at least 16 years old, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to guest satisfaction. Looks at Restaurant operations from the Guest's point of view, • Effective communicator with Teammates and the Restaurant Management Team, • Excellent Time Management Skills Transportation & Accessibility: • Must have reliable transportation to work, • Must have telephone or other reliable method of communicating with Restaurant Management Team and Teammates "About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Job Description ABOUT THE COMPANY Playa Bowls is New Jersey's Original Acai Shop, founded in 2014, and our mission is to bring superfruit bowls to the masses using only the freshest, highest quality ingredients while providing a fantastic in-store brand experience. What began as a pair of blenders, a patio table, and a fridge has flourished into a 300+ unit operator and franchisor of the leading fast casual restaurant concept. Playa Bowls added more than 70+ locations in 2024 and are on target to add as many 90 new locations in 2025. Our continued rapid growth has created the opportunity for an individual who will help us with continuing to grow our brand! WHAT WE OFFER • Competitive Pay + Tips: Enjoy a competitive hourly wage along with both credit card and cash tips — your hard work pays off!, • Professional Development: Our comprehensive Playa Bowls training program helps you build valuable skills that will benefit you in any career path., • Vibrant Work Culture: We keep energy high with a fun, upbeat environment where dancing, smiling, and having a good time are part of the job., • Employee Discounts: While on shift, enjoy 50% off. When you're off the clock, you still receive 30% off — it's a win-win! WHO YOU ARE You’re a positive, enthusiastic, and people-oriented individual with a passion for superfoods, healthy living, and (of course) fruit! As a Team Member at Playa Bowls, you’ll play a key role in creating an exceptional guest experience — from helping new customers discover their perfect superfruit blend to crafting high-quality bowls with care and creativity. You take pride in maintaining a clean, welcoming environment while upholding food quality and company standards. If you thrive in a fast-paced setting, are excited about growth and innovation, and appreciate a good food pun now and then, you’ll be a great fit for our team! WHAT YOU’LL DO • Maintain a clean, organized, and welcoming environment throughout the shop, • Manage your time effectively to complete all tasks and responsibilities efficiently, • Foster a positive and friendly atmosphere for both guests and fellow team members, • Ensure food quality by checking for consistency, flavor, and overall presentation, • Prepare ingredients and assemble bowls, smoothies, and other menu items with care and accuracy, • Operate the point-of-sale (POS) system to take and process customer orders, • Answer customer questions and address concerns in a friendly and helpful manner, • Accurately take and assemble customer orders in a timely manner, • Restock supplies, replenish condiments, and assist with inventory management as needed, • Communicate any inventory shortages or product concerns to the supervisor promptly, • Represent and embody the Playa Bowls mission, purpose, and core values in every interaction WHAT YOU’LL BRING • Committed to delivering exceptional customer service by providing friendly, attentive service and ensuring satisfaction with every guest interaction., • Proven ability to remain flexible in a fast-paced dynamic environment, quickly adjusting to changing priorities and customers’ needs to maintain seamless operations., • Collaboratives effectively with team, fostering a positive and productive work environment, • Skilled at prioritizing tasks to meet customer demands during peak hours, • Ability to handle customer concerns or operational challenges with assistance from management calmly and effectively, • Ensuring accurate orders and maintaining food presentation standards ESSENTIAL PHYSICAL FUNCTIONS • Must be able to remain in a stationary position for prolonged periods of time, • Must be able to lift or otherwise move 25-40 pounds occasionally, • Must be able to retrieve items from high and low shelving, the fridge/freezer, and under counters, • Must be able to tolerate occasionally loud environments (high powered blenders, timers, and order notifications)., • Ability to frequently move about inside the establishment to access the Point-of-Sale cash register, assemble guest orders, clear tables, restock inventory, etc. MISSION Inspire and support our communities one bowl at a time. VALUES Real Deal. Playa Passion. Powerhouse. Big Wave Chaser. Dawn Patrol “Playa Bowls is an equal opportunity employer committed to inclusivity and diversity in our workplace and all aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.”

Home Depot - - Responsibilities: Provide fast, friendly service and assess customer needs; Greet, qualify, recommend and close sales; Maintain in-stock, clean, shop-able department; Follow safety policies and complete safety training; Collaborate with department supervisor and other teams.

Job DescriptionDescription: Are you an individual who thrives on accountability, continuous improvement, and being empowered to contribute to your team? Do you enjoy working in a fast-paced, purpose driven environment where your role directly impacts organizational success? If you're ready for a high-impact role and want to help shape the future of a growing company, we want to hear from you. Cloverkey is a trusted name in retail gift shops within hospital systems. As a family-owned business, we are built on values of hard work, integrity, and exceptional customer service. We are looking for a P/T Sales Associate who embodies these qualities and is ready to take our accounting area to the next level Schedule: Monday: 3:00PM-8:15PM Wednesday: 3:00PM-8:15PM Friday: 3:00PM-8:15PM Saturday: 12:00PM-5:00PM POSITION SUMMARY: The Sales Associate is responsible for delivering exceptional customer service, supporting store goals, maintaining a clean store, and handling cash transactions. They assist customers, follow company policies, and build positive relationships with hospital contacts and volunteers. RESPONSIBILITIES: Customer Service • Provide exceptional customer service to every customer who enters the gift shop. This includes greeting every customer upon entry into the shop, thanking them for their purchase and inviting them back as they exit the shop. Store Performance • Responsible for meeting store performance objectives. The daily and monthly sales goals are available for viewing in the Daily Operations Binder and on the POS Register., • Responsible to follow the Corporate and Store Manager directions for supporting those events., • Responsible for clocking in and out according to their scheduled work slot to ensure the store stays within its budgeted hours allotment for the week. Store Appearance • Ensure the store is clean and looks its best., • Make sure all shelves are dusted, any trash is off the gift shop floor and spots are cleaned, items are organized displayed according to corporate standards, and that the store is generally clean and tidy., • Any special cleanliness requirements related to infection prevention., • Surfaces should be cleaned as per the gift shop schedule and instructions. Cash Management • Responsible for his or her own cash handling., • Counting down the register drawer to ensure accuracy at the start of every shift., • In the event of a shift change (with one employee leaving and a new employee coming in) the outgoing employee will count the drawer in the presence of the incoming employee (or Store Manager)., • Responsible for following company policy for taking credit cards and other forms of payment (e.g. cash, payroll deduction, hospital charge account, etc.)., • Properly notate any cash overages or shortages per company policy and notify the Store Manager immediately of unexplained differences of more than $10. Personal Performance • Responsible for following hospital and Cloverkey policies related to personal appearance, attendance, and customer service., • Employee performance is measured individually and as a team for each annual performance review and will cover performance, knowledge of store operations, adhering to work schedule, driving gift shop sales, customer service, understanding and adherence to hospital policies, following supervisor instructions, attitude, among other performance measures. Partner Relationship Management • Demonstrate a knowledge of who the hospital contact is and an understanding of the importance of maintaining a good relationship with the hospital., • Show respect for and understanding of the role of volunteers in the hospital and in the gift shop (if applicable). Requirements: MINIMUM QUALIFICATIONS • High School Diploma or equivalent, • Previous experience in gifts sales or a related field is preferred KNOWLEDGE, SKILLS AND ABILITIES • Stand for long periods of time, • Strong customer service skills with the ability to build rapport with customers, • Excellent phone etiquette and communication skills, • Basic math skills for processing transactions, • Ability to work in a fast-paced environment and handle multiple tasks simultaneously, • Strong sales skills with the ability to upsell and cross-sell products, • Effective time management skills to prioritize tasks and meet deadlines

Job Description Summary: The PM Manager supports the Assistant General Manager and General Manager in the daily responsibilities required to keep the business running smoothly. The PM Manager directs employees and ensures that work is being completed in a timely and effective manner. Job Expectations: The PM Manager performs Leadership, Management, and Organizational tasks while supervising fellow Teammates, monitoring their performance, to ensure they comply with company and safety policies, and delegate tasks appropriately. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Abide by and enforce to the rules and direction given by the Restaurant Management Team and refrains from insubordination, • Communicate to their immediate Supervisor when additional training guidance and practice is needed, • Effectively and consistently does required Ops Walks and Q&A checks to correct areas of opportunity, • Organize shift schedules for Team Members and monitor attendance, tardiness, and time off, • Assign duties to specific Team Members based on role and skills, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Ensure Shift Leaders and Team Members work together with their Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance, • results, • Provide direction, supervision, and feedback to maintain levels of high productivity and Team morale, • Communicate Shift Leader and Team Member work performance to the Restaurant Management Team and appropriately address performance issues, • Train new and current Team Members, • Balance cash drawers and prepare cash deposits as assigned by the Restaurant Management Team, • Assist the Assistant General Manager & General Manager as directed, • Effectively plan, organize, and implement all daily operational routines and activities alongside the Shift Leader, • Complete all required administrative duties and daily paperwork including required checklists, • Supervise and perform closing and/or opening activities as directed by the Restaurant Management Team, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire Team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs; properly uses all products, supplies, and equipment facilities, • Communicate effectively with Shift Leaders, Team Members and Management to resolve any interpersonal issues as needed Requirements: • Must be at least 18 years old and fluent in English, • Certified in all stations as a Shift Leader following the DHC Training Program, • Flexibility to work nights, weekends, holidays, closing shifts (4pm till close), • Ability to work in a fast-paced environment, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from a Guest’s point of view, • Effective communicator with co-workers and the Restaurant Management Team, • Excellent organization, planning, time management, delegation, and problem-solving skills Transportation & Accessibility: • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with Restaurant Management Team and co-workers "About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Job Description Summary: The PM Manager supports the Assistant General Manager and General Manager in the daily responsibilities required to keep the business running smoothly. The PM Manager directs employees and ensures that work is being completed in a timely and effective manner. Job Expectations: The PM Manager performs Leadership, Management, and Organizational tasks while supervising fellow Teammates, monitoring their performance, to ensure they comply with company and safety policies, and delegate tasks appropriately. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Abide by and enforce to the rules and direction given by the Restaurant Management Team and refrains from insubordination, • Communicate to their immediate Supervisor when additional training guidance and practice is needed, • Effectively and consistently does required Ops Walks and Q&A checks to correct areas of opportunity, • Organize shift schedules for Team Members and monitor attendance, tardiness, and time off, • Assign duties to specific Team Members based on role and skills, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Ensure Shift Leaders and Team Members work together with their Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance, • results, • Provide direction, supervision, and feedback to maintain levels of high productivity and Team morale, • Communicate Shift Leader and Team Member work performance to the Restaurant Management Team and appropriately address performance issues, • Train new and current Team Members, • Balance cash drawers and prepare cash deposits as assigned by the Restaurant Management Team, • Assist the Assistant General Manager & General Manager as directed, • Effectively plan, organize, and implement all daily operational routines and activities alongside the Shift Leader, • Complete all required administrative duties and daily paperwork including required checklists, • Supervise and perform closing and/or opening activities as directed by the Restaurant Management Team, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire Team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs; properly uses all products, supplies, and equipment facilities, • Communicate effectively with Shift Leaders, Team Members and Management to resolve any interpersonal issues as needed Requirements: • Must be at least 18 years old and fluent in English, • Certified in all stations as a Shift Leader following the DHC Training Program, • Flexibility to work nights, weekends, holidays, closing shifts (4pm till close), • Ability to work in a fast-paced environment, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from a Guest’s point of view, • Effective communicator with co-workers and the Restaurant Management Team, • Excellent organization, planning, time management, delegation, and problem-solving skills Transportation & Accessibility: • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with Restaurant Management Team and co-workers "About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."