Software engineer remote jobs in Houston, TexasCreate job alerts

Description Leidos Engineering has an opportunity for a Lead EPC Substation Project Engineer. This position will be part of our unique and fast-growing EPC Solutions group, which sits within our Power Delivery Solutions division that provides consulting services to both public-owned and investor-owned electric utilities. These consulting services provide clients with overall project management tasks in the areas of comprehensive engineering design of electrical transmission and distribution, substation and transmission line projects nationwide. As a Lead EPC Substation Project Engineer, you can expect to: * Act as the project technical lead for high voltage substation designs focused on projects utilizing EPC or other progressive contract vehicles that collaborate with construction. * Lead and/or perform Substation Physical Electrical engineering design (including general arrangement, electrical plans and sections, grounding plan and details, raceway plan and details, shielding plan and details, lighting plan, and details, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements. * Lead and/or perform Protection and Control engineering design (including relaying one-lines, AC schematics, DC schematics, metering, SCADA systems, station communications, station automation, station security, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements. * Lead and/or conduct engineering studies and calculations (including bus spans, shielding, lighting, conduit fill, AC/DC loading and system design, etc.). * Understand and apply industry standards, applicable state and federal safety codes, regulatory compliance requirements, and construction codes to projects. * Create equipment, material, construction, and testing and commissioning specifications. * Perform quality control (QC) reviews and lead QC review meetings on applicable engineering deliverables produced by junior staff, peers, and remote offices on small, medium, and large projects while adhering to the PDS quality management standard. * Provide technical oversight, direction, and support for project teams. * Assure proper documentation of project technical data. * Ensure and facilitate project team collaboration and communication across all disciplines and resolve design conflicts as needed. * Coordinate with project managers to successfully deliver projects to our clients. * Work directly with clients on project-related issues. * Direct and/or participate in client meetings and job-site visits to collect and deliver design and engineering information. * Identify and resolve project-related issues while proactively communicating and collaborating with the client. * Perform evaluations of existing facilities to propose upgrades and replacements and present findings and recommendations to our clients. * Apply value engineering principals for economized, constructible, and safe designs. * Complete conceptual design (one-line and general layout) to support project planning. * Provide professional mentorship while setting and maintaining a positive professional example for the team and junior staff What Sets You Apart (Background Qualifications): * Bachelor’s degree in electrical engineering from an accredited university with eight (8) + years of prior relevant experience in utility substation design/engineering; * Professional Engineer (PE) License Required * Ability to Demonstrate advocacy of Quality Assurance and Control in the field of substation engineering. * Comprehensive understanding of the utility grid (power generation, transmission, and distribution) system and the theories and principles involved in substation engineering. * Comprehensive understanding of industry standards (including NEC, NESC, NEMA, IEEE/ANSI) and their application to projects. * Competence in researching engineering and design issues, evaluating alternatives, making sound recommendations, and preparing and presenting recommendations. * Ability to meet deadlines under high-pressure situations. * High level of computer competency/Proficiency with using MS Office applications. * Team player who can work effectively in a team environment with an ability to deal with and lead a variety of individuals from various socio-economic, cultural, and ethnic backgrounds. * Strong written and oral communication skills; Strong organizational skills. * Ability to travel locally/regionally up to 15% of the time You Might Also Have (Preferred Qualifications): * Experience with substation physical and protection and control design. * Experience with engineering programs and software (including SKM, ASPEN, ETAP, CDEGS, or vendor software). * Experience with serving as firm-client liaison in a support and lead engineering role. * Prior experience as a substation lead engineer performing QC reviews and staff training/mentorship * Experience leading renewable generation projects or interconnections * Experience working on EPC projects or similar style of contracts * Active membership in national engineering societies and work groups (IEEE, PES, etc.) * Construction support experience. At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. PDSPM PDSSUBSTATION If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. March 30, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

This is a hybrid position requiring on-site presence at the Houston, TX corporate office Monday through Wednesday each week. Please note that on-site requirements may increase based on business needs. A relocation package may be offered. Job Summary The Director, Facilities Design is responsible for overseeing design projects for Sysco's global operations. Sysco Corporation's facilities design function is responsible for the conceptual design of new and renovated facilities including floorplans, site plans, and elevations. The design function works closely with Supply Chain Engineering, Construction, Finance, and Operations to develop facility designs that best meet the needs of the individual business units. The Sysco design team then collaborates with and directs outsourced architectural and engineering design teams to develop signed and sealed construction documents to be used for permitting and field operations. The Sysco design team is responsible for archiving and maintaining current all facility A/E and material handling system documents for all operations. Sysco's portfolio of real estate holdings includes over 250 major owned and leased properties (primarily distribution centers, processing plants, and office facilities) as well as over 500 minor owned and leased properties (primarily shuttle yards and remote domicile yards). Sysco's owned properties comprise over 42 million square feet of improved space. Sysco Corporation's capital plan includes approximately 20 major active projects per year and multiple reconfigurations and reworks projects. The Director, Facilities Design will foster a collaborative environment where all necessary stakeholders are involved in facility design projects to meet the current and projected needs of Sysco's business units. Responsibilities • Lead the activities of 8 Sysco direct employees who work closely with the business units, supply chain engineering and the construction group in planning, preliminary design, layout iterations RFP (request for proposal) documentation and final design coordination for multiple projects nationwide., • Coordinate with and manage multiple outside design professionals and consultants on an as-needed basis., • Lead design teams responsible for distribution facilities., • Develop and maintain design and construction standards for Sysco distribution projects., • Ensure that DC (distribution center) designs are current with best operational practices and incorporate state of the art materials and equipment., • Ensure corporate goals related to sustainability are achieved in terms of facility designs., • Lead design teams responsible for manufacturing and processing facilities design including meat and seafood processing, fruit and vegetable processing, blending and filling operations, and packaging lines., • Develop and maintain unique design and construction standards for Sysco manufacturing projects., • Ensure that manufacturing designs are current with best operational practices and incorporate state of the art materials and equipment., • Ensure corporate goals related to sustainability are achieved in terms of facility designs., • Lead design teams responsible for office facilities including corporate offices, shared business services offices, call centers, and remote offices supporting all Sysco businesses and operations., • Lead the Interior Design and Space Planning team in support of interior designs for all Sysco projects (DC, manufacturing, office) in regards to associate workspace design, furniture selection, interior finishes, interior lighting, audiovisual systems, and artwork., • Collaborate with the real estate, construction, and business teams to develop conceptual layouts and scenarios., • Develop the best organizational structure to execute construction and processing design projects., • Recruit, develop, motivate, and retain top-talent individuals to staff the design organization whether they are outsourced or in-house direct-hire team members., • Create onboarding, training, and ongoing associate development plans and ensure that they are successfully implemented., • Create and develop plans related to the necessary tools needed by design and construction teams to be successful. This includes but is not limited to CAD software and hardware, Project Management software and hardware, cloud-based real estate portfolio software, and tools for project estimating. Education • A Bachelors's degree in Architectural, Engineering, or Construction Management is required., • Masters degree in technical area or business preferred, • Experience with food processing or food distribution facilities projects required, • Professional certification or licensure as an architect, engineer, or construction project manager is preferred, • Robust PC skills (Outlook, Excel, PowerPoint, Word, MS Project and AutoCAD) required, • Familiarity with industrial structures and building systems preferred including insulated metal panel construction, ammonia refrigeration systems, automatic fire protection systems, HVAC and mechanical systems, electrical and lighting systems, plumbing, and wastewater treatment systems is preferred, • Familiarity with OSHA, PSM (platform-specific model), and RMP (Risk Management Plan) regulatory guidelines and programs preferred, • Position requires travel roughly 25% of the time, • While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear., • The employee is frequently required to sit and reach with hands and arms., • The employee must occasionally lift and/or move up to 20 pounds., • This position should be performed at the corporate facility, • Must be able to travel to Sysco facilities or operating companies, which include locations in the US, Canada, Central America, and Europe. Valid Passport and Driver's License required

Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Engineer I will be part of a team for Houston based engineering activities in support of projects performed with Oceaneering's Offshore Projects Group (OPG) installation vessels. The Engineer I is responsible for supporting technical aspects for projects that will be executed predominately in the Gulf of Mexico. Typical work scopes will include but not be limited to installations, light construction, diving and inspection, maintenance and repair (IMR) work scopes. Engineering planning will be conducted from Houston based office with offshore support of the project offshore onboard installation vessels as required. The Engineer I will report to the Installation Engineering Team Lead. ESSENTIAL : • Carries out tasks as assigned by Project Engineers and the Installation Engineering Team Lead. Tasks would generally be focused on technical issues but will sometimes require administrative functions., • Responsible for the installation engineering of subsea hardware utilizing light construction vessels with ROV and Divers. Also inclusive of field and offshore support for projects., • Assist in authoring design specifications and test plans for installation equipment and subsea hardware. This may include locating equipment and vendor selection., • Conduct engineering calculations and analysis., • Calculations will include hand calculations and/or engineering calculation software., • Analysis will include both beam element and dynamic motion analysis., • Assist in authoring design reports, analysis reports and technical memos., • Attend Factory Acceptance Tests (FAT) and System Integration Tests (SIT)., • Assist in preparing presentations, articles, and technical papers., • Interface inside and outside a meeting setting with project team members and Clients., • Perform non-engineering activities such as oversight of offshore operations and on-site oversight of OPG projects and subcontractors., • Work and travel offshore, both domestic and international. REQUIRED: • Bachelor's Degree in Engineering (Mechanical, Civil or Ocean Engineering), or equivalent combination of education and experience., • Up to two (2) years of engineering experience., • Up to two (2) years' experience with classical analytical methods, MathCAD; AutoCAD; Solidworks; structural analysis package such as ANSYS or Risa3D., • Valid driver's license, • Valid passport, • Must be able to obtain:, • Transportation Workers Identification Card (TWIC), • Petroleum Education Council (PEC) Basic Training., • Experience with dynamic analysis program Orcaflex., • Experience with conflict resolution and change management., • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations., • Ability to write reports, business correspondence, and procedure manuals., • Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public., • Ability to work with mathematical concepts such as algebra, trigonometry, analytical geometry, calculus, probability, and statistics., • Ability to apply these concepts to engineering applications including but not limited to: statics, dynamics, solid mechanics, strength of materials, fluid dynamics, thermodynamics, structural design, mechanical design, and electrical design., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Ensures that important information from management is shared with employees and others as appropriate., • Gives and receives constructive feedback., • Ensures that others involved in a project or effort are kept informed about developments and plans., • Ensures that regular consistent communication takes place within area of responsibility. This position is Hybrid - Remote and will require commuting to a designated office. Hybrid work schedules are determined by the hiring manager based on business need. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering knows robotics. From operating the world's largest ROV fleet conducting mission-critical operations deep under the oceans, to deploying cutting-edge autonomous vehicles in theme park rides and automotive operations, we know a thing or two about applying robotics technologies and solid cross-disciplinary engineering to help our clients bring automation to some of the harshest, dangerous, and most demanding environments. Our group investigates and develops new markets, products, technologies and business models in order to drive long-term growth for our lines of business. We work hard to continue being a leader in mobile robotics solutions for customers' mission-critical needs, working with like-minded partners and taking risks in delivering new and innovative solutions that push the industry and push ourselves. As a Robotics Engineer, you'll be a key member of the New Product Development core team and play a critical role in the success of prototyping and testing new products and service offerings for our commercial business units in subsea robotics, material handling automation, and in people mover applications, among others. Here's your chance to be a part of something big, with the mission focus and pace of a startup, and the stability and resources of a large company backing you up. • Effective engagement with technical and non-technical customers and partners to generate feedback for product improvements from targeted experiments, pilots and proof-of-concepts., • Interpret and decompose customer feedback and testing data into actionable technical requirements that may bridge disciplines, and coordinate with technical personnel from across the company and around the world., • Work within a multi- disciplined teams to define system level architecture and technically lead execution of developments across the company., • Given incomplete, high-level requirements for a system or subsystem of moderate complexity, generate proper designs and work to complete tasking with latitude to make decisions under minimal supervision - individually and in a teamwork environment., • Exercise excellent technical judgement, creativity, and initiative with attention to detail consistently throughout your work product, with awareness of the "system" perspective., • Prepare and participate in regular design reviews., • Responsible and accountable for your results, working with considerable autonomy, but also knowing when to ask for assistance., • Desire to stretch and expand your talents, expertise, competency, and responsibilities, • Identify patent opportunities and work with our legal team to evaluate them., • Promote a culture of learning and collaboration., • Conduct evaluations and comparisons of internal and external technologies and approaches to inform business and product decisions, • Stay abreast of industry, technology and competitor trends and creatively apply out-of-the-box thinking in innovation projects. REQUIRED: • Bachelor of Science or advanced degree from an accredited university in Electrical/Electronic Engineering (or related field/curriculum having an Electrical concentration, such as Computer Engineering or Robotics Engineering). Commensurate experience will be considered., • 0-2 years of relevant Electrical Engineering experience., • 0-2 years of experience with hardware to software machine connections and communications., • Understanding of the creative Electrical engineering process, including participation in the concept, analysis, simulation, design, drawing, assembly, integration, troubleshooting, and testing of electrical software embedded systems., • Ability to work alongside a mentor for direction and growth of hardware and software knowledge., • Knowledge and/or experience selecting and sizing current and latest available electrical and electronic components and wiring devices, such as signal conditioning, power supplies, control devices, switching devices, SSRs, safety devices, terminal blocks, connectors, DIN rail, wiring, cabling, marshalling, dressing, etc., • Experience designing, interfacing, translating, and integrating various data communications signaling, such as Ethernet, USB, and serial protocols., • Experience with DC power systems design 5-48VDC., • Experience with low-medium voltage, single- and 3-phase power systems (120, 240, 480VAC)., • Calculate and estimate system power and energy requirements., • Experience designing, wiring, cabling, grounding for minimizing electrical noise and EMI, as appropriate., • Good electrical drawing/drafting skills - accurately create and read detailed schematics, wiring diagrams, cable drawings, system cabling and block diagrams, etc., • Proficiency in proper use and application of various standard electronic test equipment; e.g., DMM/multimeters, oscilloscopes, power analyzers, spectrum analyzers, communications analyzers, CTDR, OTDR, optical power meters, etc., • Proficiency with advanced Computer Aided Design (CAD), Simulation, and Analysis software packages such as SPICE, AutoCAD, SolidWorks, MathCAD, MATLAB, etc., • Good written and oral communications skills, including ability to effectively document, convey, and present engineering concepts and products to team members and customers., • Good practical technician skills (assembly, wiring, soldering, cabling, etc.), • Proven proficiency in common computer software (Microsoft Word, Excel)., • Demonstrated strong verbal and written communication skills., • Able and eager to quickly learn new skills and technologies in a fast-paced environment., • Self-starter and intrapreneurial mindset with a passion for robotics and automation solutions that solve real customer problems. This position is Hybrid - Remote and will require commuting to a designated office. Hybrid work schedules are determined by the hiring manager based on business need. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Field Engineer Travel: 70% Location: Remote USA, CA or TX preferred The Opportunity: Picarro, Inc. has an opportunity for a Field Engineer to install, operate, and maintain air quality and continuous emissions monitoring systems (CEMS) and Workplace Monitoring Systems (WMS). This position will support Picarro's Environmental Solutions business and may require up to 70% travel, including international. This position requires good working knowledge of gas measurement instrumentation, electronics, circuitry, data communication protocols, interfacing with programmable logic controllers (PLCs), industrial process automation, and integration with analog and digital communications, as well as the ability to work with the mechanical functionality of gas analyzers. Other duties include, but are not limited to, procedure writing, parts inventory control, installation and operation of stack sampling systems, multi-point workplace air monitoring, fenceline, and ambient air monitoring systems. Experience with continuously monitoring air emission sources and industrial process gases is desired. You will work closely with our Project Management team but will be expected to be able to work alone on occasion once the training window has passed. An aptitude for troubleshooting equipment, systems, and data acquisition and handling software, as well as the ability to talk with clients and solve their technical problems, is desired. In addition to technical duties, there will be a requirement to assist with system assembly, performance testing, instrument calibration, repair, maintenance, and writing of environmental monitoring and quality assurance project plans. Responsibilities: • Conduct installations of monitoring systems, including all sample handling equipment and PLC programming, • Complete critical objectives, such as quarterly quality assurance testing and daily calibration testing of differential pressure flowmeters, ultrasonic flowmeters, and hazardous air pollutant CEMS,, • Communicate with Project Managers to define time and resource requirements for a project and coordinate these deadlines with clients and third-party firms., • Communicate with industrial site operations personnel to identify and fix issues., • Complete required customer safety training and comply with safety rules on customer sites., • Conduct calibrations and validation tests for installed systems as required by an established quality assurance plan or environmental regulation., • Maintain hardware and spare parts inventory., • Maintain a quarterly quality assurance schedule and document the completion of all items., • Log system downtime and emissions for trend analysis., • Train customers on installed systems' functionality, maintenance, and operation., • Develop system manuals, test procedures, and guidance documents as required., • Ability to work with our software team for programming DAS and PLC to meet their specific requirements, • Help develop and update SOPs for future project work Qualifications: • Approximately 2+ years of experience installing and maintaining complex emissions monitoring systems or an equal amount of time working in an industrial setting in an instrumentation or electrical field., • Experience, or the ability to familiarize oneself in environmental monitoring, safety systems, CEM, fenceline, stack testing, or similar complex industrial monitoring systems a major plus for this position., • Experience with PLC and Modbus communication protocols, • Ability to travel approximately 70% of the time to our headquarters in Santa Clara, CA., • The company reserves the right to require random drug testing for all applicable positions. Preferred Qualifications: • Bachelor's degree, Comparable Military Experience, or Technical Degree with job experience., • Instrumentation and Electrical Certification(s) The base salary range for this full-time position is $90-125k annually. Your base salary and title will be determined based on the location, experience, qualifications, skills, knowledge, level, and pay of employees in similar positions. • Medical, Dental, and Vision insurance, • Flexible Spending Account (FSA) and Health Savings Account (HSA) plans, • Life, Short-Term Disability, and Long-Term Disability Insurance, • Flexible Vacation Policy and Paid Holidays, • Employee Referral Program, • 401K, • Social events (summer picnic, holiday party, team lunches, etc.) We are the world's leader in timely, trusted, and actionable data using enhanced optical spectroscopy. Our solutions are used in various applications, including natural gas leak detection, ethylene oxide emissions monitoring, semiconductor fabrication, pharmaceutical, petrochemical, atmospheric science, air quality, greenhouse gas measurements, food safety, hydrology, ecology, and more. Our software and hardware are designed and manufactured in Santa Clara, California. They are used in over 90 countries worldwide based on over 65 patents related to cavity ring-down spectroscopy (CRDS) technology. They are unparalleled in their precision, ease of use, and reliability. At Picarro, we are committed to fostering a diverse and inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, national origin, protected veteran status, gender identity, social orientation, or disability. Posted positions are not open to third-party recruiters/agencies, and unsolicited resume submissions will be considered free referrals. At Picarro, we strive to ensure that all individuals, regardless of their abilities, have equal opportunities. If you are an individual with a disability and require reasonable accommodation to complete any part of the application process or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, please contact Picarro, Inc. at___for assistance.

Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilical's, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Robotics Software Engineer will be a key member of the New Products Development core team and play a critical role in the success of prototyping and testing new product and service offerings for our commercial business units in subsea robotics, material handling automation, and in people mover applications, among others. LOCATION: Role provides the opportunity to work in hybrid environment, working both virtually and in office when required. ESSENTIAL : • Design, develop, implement, and test software on a variety of assignments across multiple projects., • Work across the robotics stack to solve challenge problems in land, air and sea-based robotics., • Implement algorithms that run on our robots, both internal to the software system and client facing., • Create and execute software test plan to deliver quality software, • Create prototypes and proof of concepts for new features requested by the product team., • Support testing of prototype and first article products., • Maintain code and documentation using revision control., • Interact with customer representatives to define and manage customer expectations., • Mentor Jr engineers as required., • Other duties as assigned. REQUIRED: • Bachelor's degree in Electrical/Electronics/Mechatronics/Software Engineering with 5 years of industry experience or Master's degree in Electrical/Electronics/Mechatronics/Software Engineering with 3 years of industry experience or equivalent combination of education and experience., • Minimum 3 years of experience with one or more of C/C++, Python and Bash., • Minimum 3 years of experience with embedded and real-time operating systems., • Minimum 3 years of experience working with hardware (Motors, controllers, industrial manipulators, sensors etc.)., • Experience working with Linux environment for software development, • Experience working on projects to completion and deployed in the field., • Experience using GitHub, Agile, SCRUM or other formal processes, • Experience working to integrating multiple software modules, • Intermediate knowledge of electrical and electronic circuits., • Experience working with Perception, Inference, Localization and Mapping, • Knowledge of simulations (MATLAB/Simulink ROS, Gazebo, Unity3D, etc.), • Knowledge of OpenCV, Point Cloud, Cuda, • Knowledge of communication protocols (MQTT, TCP, UDP, CAN), • Knowledge of with AI, Machine learning and Image processing, • An individual should demonstrate following competencies & qualities to be able to perform this role successfully:, • Excellent communication and organizational skills., • Ability to work in a team environment, remaining attentive to ideas, recognizing responsibilities, and actively participating with others to accomplish assignments and achieve desired goals, • Analytical, problem solving & decision-making skills., • Ability to work independently with minimal supervision and manage deadlines., • Ability to effectively manage time to meet operational needs and desired outcomes., • Ability to approach new technologies and open-ended problems., • Ability to travel up to 10% This position is Hybrid - Remote and will require commuting to a designated office. Hybrid work schedules are determined by the hiring manager based on business need. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Job DescriptionTitle: Civil / Mechanical Engineer – Natural Gas Location: Houston, TX - Remote: Will occasionally meet clients in the Houston metro area Hire Type: Contract-to-Hire Pay: $48-52/hr Sterling Engineering is looking for a Civil / Mechanical Engineer to support natural gas projects in the New Orleans area. This role involves design, reporting, and field observation for utility infrastructure projects. Job Duties: • Design and develop various natural gas projects., • Perform civil site design and prepare construction plans., • Develop design reports and technical documentation., • Conduct on-site observations as required.Qualifications:, • 2–5 years of experience in natural gas or utility engineering projects., • Bachelor’s degree in Civil or Mechanical Engineering., • Experience with Autodesk Civil 3D and other engineering software such as GasCalc, Pipeline Toolbox, BoreAid, or similar programs., • Ability to work remotely with occasional onsite visits to project offices.Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected

Why join us? Competitive base pay plus bonus Full remote options Flexible work schedule 401(k) with company match Generous Paid Holidays / Vacation Life Insurance/Disability Education/Training/Tuition/Certification Reimbursement Job Details Duties and Responsibilities: • Develop software for both

Salary: $150,000 - $185,000 per year A bit about us: We are a growing fintech company that is on the lookout for a 100% remote Senior Ruby on Rails Engineer / Senior Full Stack Developer! Why join us? As a Senior Ruby on Rails Developer / Senior Software Engineer in our company, we are able to offer

Description Leidos Engineering has an opportunity for a Lead EPC Substation Project Engineer. This position will be part of our unique and fast-growing EPC Solutions group, which sits within our Power Delivery Solutions division that provides consulting services to both public-owned and investor-owned electric utilities. These consulting services provide clients with overall project management tasks in the areas of comprehensive engineering design of electrical transmission and distribution, substation and transmission line projects nationwide. As a Lead EPC Substation Project Engineer, you can expect to: * Act as the project technical lead for high voltage substation designs focused on projects utilizing EPC or other progressive contract vehicles that collaborate with construction. * Lead and/or perform Substation Physical Electrical engineering design (including general arrangement, electrical plans and sections, grounding plan and details, raceway plan and details, shielding plan and details, lighting plan, and details, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements. * Lead and/or perform Protection and Control engineering design (including relaying one-lines, AC schematics, DC schematics, metering, SCADA systems, station communications, station automation, station security, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements. * Lead and/or conduct engineering studies and calculations (including bus spans, shielding, lighting, conduit fill, AC/DC loading and system design, etc.). * Understand and apply industry standards, applicable state and federal safety codes, regulatory compliance requirements, and construction codes to projects. * Create equipment, material, construction, and testing and commissioning specifications. * Perform quality control (QC) reviews and lead QC review meetings on applicable engineering deliverables produced by junior staff, peers, and remote offices on small, medium, and large projects while adhering to the PDS quality management standard. * Provide technical oversight, direction, and support for project teams. * Assure proper documentation of project technical data. * Ensure and facilitate project team collaboration and communication across all disciplines and resolve design conflicts as needed. * Coordinate with project managers to successfully deliver projects to our clients. * Work directly with clients on project-related issues. * Direct and/or participate in client meetings and job-site visits to collect and deliver design and engineering information. * Identify and resolve project-related issues while proactively communicating and collaborating with the client. * Perform evaluations of existing facilities to propose upgrades and replacements and present findings and recommendations to our clients. * Apply value engineering principals for economized, constructible, and safe designs. * Complete conceptual design (one-line and general layout) to support project planning. * Provide professional mentorship while setting and maintaining a positive professional example for the team and junior staff What Sets You Apart (Background Qualifications): * Bachelor's degree in electrical engineering from an accredited university with eight (8) + years of prior relevant experience in utility substation design/engineering; * Professional Engineer (PE) License Required * Ability to Demonstrate advocacy of Quality Assurance and Control in the field of substation engineering. * Comprehensive understanding of the utility grid (power generation, transmission, and distribution) system and the theories and principles involved in substation engineering. * Comprehensive understanding of industry standards (including NEC, NESC, NEMA, IEEE/ANSI) and their application to projects. * Competence in researching engineering and design issues, evaluating alternatives, making sound recommendations, and preparing and presenting recommendations. * Ability to meet deadlines under high-pressure situations. * High level of computer competency/Proficiency with using MS Office applications. * Team player who can work effectively in a team environment with an ability to deal with and lead a variety of individuals from various socio-economic, cultural, and ethnic backgrounds. * Strong written and oral communication skills; Strong organizational skills. * Ability to travel locally/regionally up to 15% of the time You Might Also Have (Preferred Qualifications): * Experience with substation physical and protection and control design. * Experience with engineering programs and software (including SKM, ASPEN, ETAP, CDEGS, or vendor software). * Experience with serving as firm-client liaison in a support and lead engineering role. * Prior experience as a substation lead engineer performing QC reviews and staff training/mentorship * Experience leading renewable generation projects or interconnections * Experience working on EPC projects or similar style of contracts * Active membership in national engineering societies and work groups (IEEE, PES, etc.) * Construction support experience. At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. PDSPM PDSSUBSTATION If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. March 30, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

What we’re looking for** - Strong, practical software engineering skills; you can ship end-to-end and unblock yourself.

Key Responsibilities - Craft realistic developer prompts across multiple categories (code review, debugging, error diagnosis, configuration, and more) - Source and adapt content from real PRs to create authentic scenarios - Write clear, technically accurate model responses that demonstrate strong re

Site Reliability Engineer — Production Systems Expert** Mercor is seeking experienced Site Reliability Engineers with deep expertise in production incident response, on-call operations, and infrastructure reliability.In this role, you will apply your real-world experience managing high-ava

Job description: Our client is a leading manufacturer of precision dispensing and dosing solutions, seeking a Regional Sales Engineer to join their team and drive growth across various industrial applications. This role will allow you to work remotely anywhere in the Texas region, while traveling to customers in your assigned territory. The ideal candidate will be a motivated engineer with solid experience in technical sales, specifically in automation technology. Responsibilities • Identify and pursue new sales opportunities to expand the customer base in your region., • Manage territory including AR, LA, TX, OK., • Collaborate with a technical engineering team based in the US and Germany to design and implement advanced automation solutions., • Build and nurture relationships with clients in sectors like automotive, electronics, 3D printing, and aerospace., • Manage internal and external projects to ensure timely and efficient execution., • Prepare detailed quotes tailored to customer specifications., • Provide exceptional customer support to foster long-term relationships., • Bachelors degree in Engineering, preferably mechanical, process, or mechatronics., • 2+ years of experience in technical sales, with a background in automation technology., • Experience with precision dispensing or dosing technology, • Proficient in Microsoft Office and familiar with CRM software, preferably Salesforce., • Strong problem-solving skills for tackling complex technical challenges., • Competitive base salary plus performance-based bonuses to reward your efforts., • Flexible work environment / remote / hybrid: travel within assigned region, headquarters, and industry events., • Generous paid time off PTO, including a shutdown week between Christmas and New Year., • Access to competitive medical insurance., • 401K plan available from day one.

Staff Software Engineer Remote Job Duties: • Implement and evolve a Data Lake storage system with low latency and high throughput for bulk data ingestion and query • Implement metadata, data governance, security, and acce

Job DescriptionAre you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you!We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. As NASA's largest engineering solutions provider working together with NASA at centers across the United States.We have an exciting opportunity for a temporary part-time Electronics Design Engineer - Space Exploration Electronic Systems to join our JETS II team with Nexus, a teammate company.The Electronics Design Engineer - Space Exploration Electronic Systems will: • Report directly to the Electronics and Electrical Section Manager as part of group of over 45 other Electronics and Electrical Engineers., • Serve as Subject Matter Expert for VIPER's electrical power subsystem., • Provide VIPER Mission Operations Support (updates to Power Console handbook, Ground Alarm Limit, and tools), including monitoring of live telemetry and subsystem performance., • Develop and maintain power budgets, load analyses, and fault-response logic., • Conduct System Testing: MGRU4 Long Duration and Battery Low State-of-Charge Driving test, Long Term Storage 6-month Vehicle Power-on Checkout Test, VIPER Powered-on Sustaining Test, and VIPER Flight SW Update and Powered-on Sustaining Test., • Serve as the VIPER/Lander Power Quality Test Lead (Test objectives and TPS development, and Testbed Dry-run execution)., • Serve as VIPER Testbed Lab Manager (Monthly ESD Checks, Weekly Cleanliness Assay, Calibrated Equipment Management, and Testbed Enclosure Upgrade Design and Implementation to support evolving test requirement)., • Document test configurations and analyze results to support anomaly resolution and system improvements., • Work directly with or as a Team Lead and associated Electrical Engineers on a given project., • Support new designs from conception, analysis, and manufacturing, through to operational test and deployment., • Provide design support and guidance in various aspects of Electronics System Development., • Be familiar with NASA specifications for Electronics Component development., • Develop component test stand architectures for various components., • Design and generate electrical component and lab instrumentation test system designs., • Develop and or modify LabVIEW code for various test systems., • Develop detailed test verification procedures., • Work with electrical and mechanical technicians to build and test designed systems., • Develop and test various breakout boxes and digital/analog sensor emulation systems., • Perform electrical evaluation/selection of instrumentation (pressure transducers, flow meters, pumps, fans, RTDs, Thermocouples, etc.)., • Troubleshoot and repair existing test systems., • Conduct analog and digital printed circuit board design for various application needs., • Develop test software modules to perform specific tests., • Work with eCAD designer to develop printed circuit board designs., • Work in a laboratory environment, following standard operating procedures., • Perform other duties as required and assigned.Requisition Qualifications:This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised., • Typically requires a minimum of a bachelor's degree in Engineering and normally possess 5-10 years of related experience., • Prior experience conducting Power System Analysis for mission operations /planning and requirement close-out using Simscape (Electrical) to model and run simulations., • Prior experience conducting data analysis using National Instruments DIAdem, including data visualization, scripting, and automated reporting for engineering and test datasets, • Prior experience with Power Supply Design, Power supply soft start circuit design, and switching regulators, • Prior experience with power supply remote senses, power distribution for PCB layout, Power Supply Phase Impedance measurements, and Power Supply efficiency calculation., • Prior experience in test of power supply and conditioning systems., • Prior experience with power system stability analysis., • Prior experience with circuit design of analog PCB, digital PCB, and power PCB., • Prior experience with SPICE Simulation, • Prior experience with Power Quality, • Prior experience with bonding and grounding, • Prior experience with electrical schematic entry and printed circuit board layout tools such as Altium Designer, and version control software like Subversion (SVN)., • Prior experience with data acquisition systems (especially National Instruments) and LabVIEW code development, • Prior experience with FPGA circuitry design and coding in associated VHDL development environments (Xilinx FPGA using VIVADO tool)., • Prior experience with microcontroller circuitry design and associated embedded software development environments.Requisition Preferences:, • BS degree in engineering from an accredited engineering school and five (5) years of related engineering experience, or a MS degree from an accredited engineering school and four (4) years of related engineering experience, or Ph.D. from an accredited engineering school and zero (0) years of related experience, • Background in Systems Engineering, • Prior experience with JSC standards and processes, • Prior experience supporting NASA flight or surface mission operations., • Prior expertise working with solar arrays, batteries, converters, fault protection, and distribution architectures., • Prior experience with Verification closure (Level 2 and Level 3 requirements / 8070 Standard Compliance), • Prior experience mentoring engineers or leading subsystem troubleshooting efforts., • Prior experience with telemetry interpretation and real-time monitoring., • Familiarity with rover or robotic vehicle operations in lunar or analog environments., • Prior experience with design and testing cable harnesses, design and testing of analog instrumentation systems. design and testing of stepper and brushless DC-DC control circuits, and design and testing of power supply and conditioning systems., • Experience with test hardware such as oscilloscopes, multi-meters, logic analyzers, function generators, electronic load banks, power supplies, power analyzers, • Prior experience in design and test of analog instrumentation systems, • Project based experience designing, building, testing, and troubleshooting power distribution electronics, battery systems, and other electrical hardware (requirements definition, system modeling and simulation; circuit analysis; PCB design, fabrication, and assembly; harness design and fabrication; requirements verification), • Hands on experience in the design, build, and test of embedded systems, • Prior experience with circuit simulation tools such as OrCAD, Multisim etc., • Experience with hardware and VHDL-based development for Space applications, • Knowledge with Linux application/embedded code development., • Familiarity with the Linux operating system and programming in C/C++., • Experience in the hardware design of embedded systems (microcontrollers, FPGAs, sensor interfaces, I2C/SPI buses, UARTS, etc.), • Excellent communication skills and the ability to work in a multi-disciplinary team of mechanical, electrical, and software engineers designing and building world-class, NASA space-flight hardware., • Proficient in MS Office programs, particularly MS Project, Excel, PowerPoint, Word, OneNote, OneDrive and Outlook, • Excellent communication and organizational skills and the ability to work in a team environment. Job Posted by ApplicantPro

Job Description Job Summary We are seeking a highly motivated and customer-focused Tier 1 IT Support Engineer to join our Service Desk team. This role serves as the first point of contact for all technical support issues, delivering quick and effective resolutions aligned with the ITIL framework. You will diagnose incidents, fulfill service requests, and escalate issues appropriately. All while delivering a high-quality support experience to our end users. Key Goals and Expectations Goal Expectation First Contact Resolution (FCR) Resolve ≥70% of tickets at first touch Customer Satisfaction (CSAT) Maintain CSAT scores ≥90% Ticket Response Time Respond to all new tickets within 10 minutes Escalation Accuracy Properly escalate ≤30% of cases, with full documentation Documentation Log all actions clearly and use knowledge base consistently Compliance Adhere to ITIL-aligned processes and internal SOPs Participation Attend team stand-ups, submit process improvement ideas, and complete assigned training Key Responsibilities Incident Management * Log, triage, and troubleshoot user-submitted incidents using the ITSM platform * Perform initial diagnosis and apply KB-guided solutions * Identify root causes for common problems and propose workarounds * Resolve low impact, recurring technical issues independently Request Fulfillment * Handle service requests such as: * Password resets * Account unlocks * Software installations * Basic access provisioning * Track fulfillment through standard workflows and maintain communication Knowledge & Documentation * Reference knowledge base articles during ticket handling * Suggest updates to existing documentation or draft new KB entries as needed * Flag content gaps or inconsistencies Escalation Handling * Use predefined Escalation Process Flow to determine Tier 2 handoffs * Document all steps taken before escalation, including: * Logs, screenshots, KB links * User interactions * Attempted fixes Customer Interaction * Communicate effectively and empathetically with users * Provide regular updates and set expectations for resolution * Educate users on common issues and prevention steps Required Skills & Experience * Basic knowledge of Windows OS, Office 365, remote support tools * Experience using ITSM tools (e.g., ConnectWise PSA, Dynamics 365 Customer Service) * Excellent verbal and written communication skills * Customer-first mindset and problem-solving attitude * Ability to follow structured processes and document work accurately Preferred Qualifications: * CompTIA A+, Network+, or equivalent * Prior helpdesk or technical support experience (1+ years) Success Metrics * FCR Rate: ≥70% * Average Handle Time (AHT): ≤12 minutes * Escalation Rate: ≤30% * Ticket Volume: 12–16 tickets/day * CSAT Score: ≥90% * SLA Response Compliance: 100% within response SLA Work Schedule * 8-hour shift during standard business hours (7:00 AM – 6 PM) * On-call participation: (None required for Tier 1) Qualifications: • Excellent customer service and interpersonal skills, • Highly self-motivated and detail-oriented, • Ability to effectively prioritize and multi-task in a high-pressure environment., • Strong background in Windows client operating systems, standard desktop applications, and user account management., • Working knowledge of network support issues, • Working knowledge of remote working systems and support, • Ability to work in a team-oriented collaborative environment., • 1 year to 2 years of service desk experience is preferred., • At least 2 years of Customer Service experience required, 3 or more years preferred., • Ability to install, configure and troubleshoot Windows client operating systems. Benefits: Health Dental Vision 401k

Job DescriptionSalary: BCR Environmental Corporation is a solutions company transforming the way municipalities and industrial processors treat and manage biosolids, organic wastes, and other process streams. BCR patented technologies convert organic waste and other process streams into valuable products that may be further processed or used as end products. BCR is growing rapidly because we offer solutions that lower costs and reduce risk. BCR has a significant U.S. market position as a technology innovator and leader in the municipal biosolids sector. Our Whole Solutions eliminate odor, improve regulatory compliance, simplify biosolids and organics management, and convert waste streams into renewable resources. Further, BCR is rapidly expanding into industrial markets through resource recovery projects, environmental remediation, and difficult heat transfer and processing solutions. BCR has an outstanding opportunity to add a Junior Design Engineer to work within the company Engineering Team. BCR maintains a family first culture and a fun working atmosphere, where each person contributes to a successful team. If you are looking for a place to immediately provide impact and grow in a high growth and sustainable industry - this is the place. Position Type: Full time, salaried, 90-day probationary period Position Posting: Houston, TX (77084) Not a remote position Job Description: The candidate must be able to work independently or with Engineers on the development of original equipment designs or adaptations. Performs complex computer aided designs with emphasis on functionality, manufacturing, and maintainability. Employs the best combination of information and contributing data to develop final design. Ability to utilize a data management system to manage change on equipment bills of materials. Handles special projects, as assigned. The candidate must be authorized to work in the United States. Reports to: Engineering Manager Essential Functions: * Candidate will have detailed work instruction to convert customer requirements into detailed engineering specifications, including drawings and bill of * Candidate will work with the creation of typical component fabrication & assembly drawings, and equipment General Arrangement drawings. * Create, update, and maintain drawings in AutoCAD, Inventor and Plant 3D * Modify existing Project drawings for modification and upgrade projects. * Maintain Project & Product drawings under change control in AutoDesk Vault * Check each design against job * In design, consider form, fit, and function; safety in assembly, maintenance, and operation; method and ease of manufacture; method and ease of assembly and appropriate materials of * Support customer required delivery by meeting deadlines for supplying drawings to customers and manufacturing. * Solves customer problems with * Maintain the company Knowledge, Skills, and Abilities Required: * 4-year Degree in Mechanical Engineering or related field or technician degree and equivalent * Entry levelengineer with 1-3 years of experience in drafting * Experience in AutoCAD and Inventor software for * Experience in ASME code, industry standards, Drafting and design * Experience with P&IDs and Electrical drawings and diagrams is * Strong proficiency in AutoCAD (2D and 3D), Plant 3D and Inventor computer * Working knowledge of international standards such as ISO, ASME and NEC, * Knowledge of fabrication techniques such as welding, machining etc. * Ability to interpret technical * Knowledge in both PVC and Metal * Knowledge of rotating equipment, pressure vessels, and skid assemblies * Ability to work without close supervision and accomplish assignment to high quality and on * Detail oriented with a focus on first time quality, able to create and check * Ability to select Materials based on design * Able to collaborate and problem solve with others in a team * Able to meet metrics for productivity and meet deadlines on a high volume of * Possess a valid drivers license * Travel up to 10% possible Benefits: * Ten Paid Holidays * 80 hours of PTO * Medical benefits to include: * Medical * Vision * Life Insurance * Short Term Disability * Long Term Disability * Company loaned AutoCAD machine and monitors for remote (home) use when necessary. * Company provided credit card for all reimbursable * 401K Equal Opportunity Employer Statement: BCR Environmental is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions at BCR Environmental are based on business needs, job requirements, and individual qualifications, without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable laws. We are committed to ensuring that all employees feel respected and valued.

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Natural Gas Engineer to join our ICE Team to improve infrastructure in our Southern offices. The candidate must have a bachelor's degree in Civil or Mechanical Engineering, and five to ten years of similar work experience. Experience with natural gas and other utilities is preferred. The candidate must also be self-motivated, work well with others, and have excellent writing, organizational, and communication skills. A flexible hybrid-remote work schedule is available after 30 days of employment. Typical responsibilities include: • Design various natural gas projects including distribution mains, transmission pipelines, metering & regulating facilities as well as launcher/receiver assemblies., • Perform civil site design, trenchless installation design, utility conflict analysis, and traffic control plan design., • Prepare design reports and construction plans using client, local, state, or other applicable standards., • Coordinate preparation of specifications and permit submittals., • Prepare preliminary project cost estimates and evaluate quantities., • Document design changes and communications., • Conduct on-site observations as needed., • Prepare project status and other reports., • Assist in the preparation of proposals., • Assist Project Managers as needed., • Attend client, public, project, and staff meetings including client progress, plan review, preconstruction, etc., • Attend seminars and/or training classes., • Maintain excellent client relations., • Maintain a safe working environment. Education:, • Bachelor's Degree in Civil or Mechanical Engineering requiredSkills/Experience:, • 5-10 years of experience is required., • Experience with natural gas or other utilities preferred., • Experience with AutoDesk Civil 3D is preferred.

Job Description The Sr. Technical Engineer plays a critical role in leading and managing the technical aspects of industrial projects involving refractory installations, corrosion protection, rubber lining applications and scaffolding systems. This position is responsible for developing engineered solutions, overseeing technical execution, ensuring compliance with industry and customer standards, and providing mentorship to others. The role requires deep expertise in materials science, heat transfer, stress analysis and industrial construction methods as well as a practical understanding of the harsh, corrosive and high temperature environments found in industries such as petrochemical, refining, incineration, power generation, gas, liquids & minerals processing and steel manufacturing. Role and Responsibilities • Lead the design, specification, and technical oversight of refractory linings, corrosion protection systems, rubber linings, and scaffolding structures., • Collaborate with project managers, estimators, and clients to develop technical scopes of work, project plans, and material selections., • Analyze engineering drawings, specifications, and customer requirements to ensure technical solutions align with project objectives and safety standards., • Provide technical support and troubleshooting guidance during project execution, both remotely and on-site., • Conduct inspections, quality checks, and failure analyses for ongoing and completed projects., • Support procurement in evaluating material specifications, vendors, and subcontractor capabilities., • Stay up to date with applicable codes, standards (e.g., ASTM, API, NACE, OSHA), and best practices in industrial applications., • Participate in root cause analysis and provide recommendations for design or process improvements., • Prepare and present technical documentation, reports, and client-facing communications., • Mentor and train junior engineers and technicians in technical procedures and safety practices., • Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree preferred., • Minimum 7–10 years of experience in an industrial services environment, with direct experience in refractory, corrosion, rubber lining, or scaffolding systems., • Professional Engineer License is a plus, • Strong understanding of materials used in high-temperature, chemical, and abrasive environments., • Proficiency in engineering software (e.g., AutoCAD or equivalent)., • Familiarity with scaffolding load calculations and design requirements., • Working knowledge of QA/QC procedures, inspection techniques, and documentation practices., • Excellent communication skills with the ability to interface effectively with cross-functional teams and clients., • Willingness to travel, as needed (domestic and/or international)., • Field Mobility: Ability to move around construction and industrial job sites, including climbing ladders, scaffolding, and accessing confined spaces, elevated platforms, and uneven surfaces., • Manual Dexterity: Capable of using hand tools and testing equipment, and handling materials or samples during inspections and assessments., • Physical Stamina: Able to stand, walk, or remain on foot for extended periods during field inspections or supervision, often in hot, dusty, or chemically exposed environments., • Lifting Requirements: Must be able to lift and carry equipment or materials up to 50 pounds occasionally., • Environmental Tolerance: Ability to work in extreme conditions including high heat (near kilns or furnaces), humidity, noise, dust, fumes, and chemicals while wearing appropriate PPE., • Vision and Hearing: Visual acuity (with or without correction) sufficient to read technical drawings, operate computers and field equipment, and perform visual inspections. Adequate hearing (with or without aids) to detect alarms, communicate in noisy environments, and participate in safety briefings., • PPE Usage: Must be capable of wearing and working in full personal protective equipment (PPE), including hard hats, safety glasses, gloves, flame-resistant clothing, steel-toed boots, respirators, and fall protection harnesses when required., • Travel and Field Work: Willingness and ability to travel to remote job sites, sometimes on short notice, and work extended hours or shifts based on project demands. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employment at Thorpe Specialty Services Corporation is on an “at-will” basis. There is no contract of employment between Thorpe Specialty Services Corporation and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Thorpe Specialty Services Corporation and its affiliates provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Why Work at SMA America At SMA America, we believe in Energy that Changes. Since 1981, we've been developing innovative solar technology that simplifies, secures, and enhances the performance of photovoltaic systems — all while pushing the boundaries of what's possible in clean energy. But we're not just transforming power — we're empowering people. We've built a culture where bold ideas are welcomed, collaboration is second nature, and your career growth truly matters. With our Rocklin, CA headquarters as the hub, we offer a hybrid work model, competitive benefits, and a team-driven environment where your impact is seen and felt. Whether you're a sales expert, service pro, or engineering innovator, if you're ready to join a purpose-driven team committed to shaping the future of energy — we'd love to meet you. PURPOSE OF POSITION The Service Engineer is responsible for maintaining utility and commercial inverters, PV Solar equipment, and customer site equipment at an assigned onsite location. This is a full-time, onsite-only role based at a utility-scale solar site in Needville, TX. Candidates must reside within one hour of the site (102 J C Wicks, Needville, TX 77461). PRIMARY DUTIES / RESPONSIBILITIES • Commissions, troubleshoots, repairs, and analyzes utility and commercial inverters, PV Solar equipment, and customer site equipment in the field., • Performs DC tracker system maintenance, panel replacement, substation switching, site inspections, and inverter system operations., • Operates heavy equipment as required by site conditions and scope., • Develops a detailed knowledge of SMA's and other utility and commercial inverter products, associated PV accessories, site equipment, and third-party accessories installed at the customer site., • Maintains a working knowledge of applicable National Electric and Electrical Safety Codes (NEC, NFPA70E, NESC, OSHA)., • Regularly works with high voltage DC electricity, low and medium voltage three-phase power, SCADA or third-party monitoring, and the relevant software and firmware of inverter and site equipment., • Performs O&M activities across the full scope of the site — not limited to inverter work., • Maintains a high level of customer satisfaction., • At least 2 years of experience in PV Solar and/or PV Solar O&M., • At least 3 years of experience in electrical, electronic, and/or network communications are required., • O&M field experience strongly preferred; back-shop or shop electrical backgrounds also considered., • California Electrical License or Electrical Contractors license preferred., • NABCEP Certification is strongly preferred., • Knowledge of solar and/or alternative energy markets is preferred., • Knowledge of National Electric Code(s) and Electrical Safety Code(s) is preferred., • Excellent verbal and written communication skills are required., • Proficiency in the English language, both written and verbal, is required. German and/or Spanish language skills are a plus., • Proficiency with Microsoft Office Suite (Word, PowerPoint, and Excel) is required., • Attention to detail and a high level of accuracy are required., • Ability to analyze and solve problems effectively., • Ability to work from heights, on ladders, or lift equipment. Forklift experience a plus., • Compensation range: $30.00 – $31.50 per hour, dependent upon experience., • Comprehensive benefits including health, dental, and vision coverage (including $0 premium options)., • Work Location: This is a full-time, onsite-only position. Candidates must reside within one hour of the site in Needville, TX. Remote work is not available for this role., • 401(k) plan with company match., • Opportunities for professional development and training. We are an equal opportunity employer and we make our employment decisions on the basis of merit and without regard to one's race, color, creed, sex (includes gender, pregnancy, childbirth and related medical conditions), gender identity, religion, marital status, age (over 40), national origin or ancestry, physical or mental disability (includes HIV/Aids), medical condition (cancer, genetic characteristics), veteran's status, sexual orientation, or any other consideration made unlawful by law. In accordance with applicable law protecting qualified individuals with known disabilities, SMA will attempt to reasonably accommodate qualified applicants with known disabilities, unless doing so would create an undue hardship on SMA. Any qualified applicant with a disability who believes he or she requires an accommodation in order to perform the essential functions of the job for which he or she is applying should identify the accommodation(s) needed in the application. Our Privacy Policy During your job application or recruitment process with us: (a) SMA may collect your personal information directly from you, such as when you submit your application and resume on our online portal or when you have job interviews with us. We may also obtain your personal information from third parties, including but not limited to your former employers, background or employment check service providers or third-party recruiters; and, (b) SMA may use or process applicants' personal information for relevant purposes including but not limited to general communications with you, identity verification, background or employment checks, determination of eligibility, and making hiring decisions. For successful job applicants who become SMA's staff, we may retain and integrate your personal information collected during the recruitment process into your records at SMA. For unsuccessful job applicants, [SMA may retain your application for internal records or for future recruitment purposes]. If you are a California resident, you have specific rights regarding your personal information under the California Consumer Privacy Act of 2018, as amended including by the California Privacy Rights Act of 2020, and its implementing regulations (the "CCPA"). This Company Personnel and Covered Individuals Privacy Notice for California Residents issued by SMA is applicable to you and explains your CCPA rights and our collection, use or disclosure of your personal information. If you have any question regarding our privacy policy, please contact us at

Job Description In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Who We Are... About Us SmartVault is a cloud-based document management and file-sharing solution for small-to-medium-sized businesses, professional accountants, and bookkeepers. In 2017, SmartVault became part of the GetBusy Group, which is AIM-listed and currently trading on the London Stock Exchange. SmartVault continues to operate as a wholly owned subsidiary in the US, but we are now part of a much larger global team with expanded products serving the US, UK, and Australia/New Zealand markets. The Role We are looking for a motivated and hands-on DevOps Engineer with 3-5 years of experience to join our agile, cross-functional product team. You will be responsible for designing, implementing, and optimizing highly secure, scalable, and reliable cloud platform solutions on AWS. You will collaborate with the Head of DevOps and other technical leaders to build and maintain infrastructure, automation, monitoring, and security processes. Additionally, you will play a key role in supporting ISO 27001 / ISMS / SOC2 Type II compliance efforts. This role requires strong analytical and troubleshooting skills, excellent communication, and a proactive approach to problem-solving. While an infrastructure background is beneficial, you should also be comfortable writing scripts and basic software code to enhance and streamline operations. The Team The SmartVault product team is dynamic and fast-paced, keeping up to date with the latest technologies, and using agile and self-organising principles to help deliver quality products and services. The team wholeheartedly embraces the DevOps culture, continuously striving to add value to products and customers through automation, collaboration, and a proactive monitoring and feedback loop with product teams. And that’s only just the start! It’s a great cross-functional team that works to produce great technical solutions in a great way. We offer you the opportunity to: • be part of a talented, collaborative and motivated team, • learn from and be inspired by skilled colleagues, • teach and inspire others, • work across the entire product life cycle, • develop your skill set and research / adopt the latest design patterns, methodologies, principles and technologies, • have a positive influence over high level architectural decisions, • make your mark and, in doing so, make us betterKey Responsibilities, • Work closely with the Head of DevOps to define detailed technical requirements, plan work, and prioritize tasks according to business needs., • Design, implement, and maintain AWS cloud platform solutions., • Ensure strict security compliance and best practices in cloud infrastructure., • Drive automation to improve efficiency, scalability, and system reliability., • Strive for zero downtime when deploying solutions or services., • Develop and own scalable processes for:, • Capacity planning, • Configuration management, • Monitoring and observability, • Provide day-to-day operational support and perform systems administration tasks., • Participate in an on-call rotation to support the platform 24/7., • Ensure high-quality monitoring coverage for infrastructure and applications., • Identify potential failure points in infrastructure and proactively develop mitigation strategies., • Collaborate with internal IT teams for operational support., • AWS Services – CloudFormation, EC2, RDS, Lambda, S3, SQS, SNS, CloudWatch, ECS, CloudFront, CloudTrail, Inspector, SSM, • Containerization – Docker, Podman, • Infrastructure as Code – Terraform, HashiCorp Packer, • Message Queues – RabbitMQ, • Operating Systems – Windows, LinuxDatabases, • Relational – MySQL, PostgreSQL, • NoSQL – DynamoDB, CouchbaseScripting & Programming, • Languages – Python, Bash, PowerShell, JavaScript, • Preferred 3-5 years DevOps experience., • Strong AWS experience in infrastructure, security, and automation., • Technical infrastructure knowledge across servers, storage, and networks., • Experience with containerization (Docker, Podman, etc.)., • Comfortable working in high-security and high-compliance environments., • Hands-on experience scripting and coding for DevOps automation., • Experience in database administration, performance tuning, and resilience design., • Solid understanding of CI/CD concepts and best practices., • Familiarity with monitoring, logging, and alerting for large distributed systems., • Strong networking fundamentals (IP, traffic flow, network ports, protocols like HTTP, HTTPS, SMTP, FTP)., • Ability to troubleshoot complex infrastructure issues and drive resolution., • Experience managing large-scale tasks from inception to completion., • Strong understanding of cloud security principles., • Experience with automated testing in DevOps workflows., • Knowledge of Infrastructure as Code (IaC), shift-left principles, and immutable infrastructure., • Experience working in ISO 27001, PCI compliance, or SOC2 Type II environments., • Take ownership of their work and care about results., • Have a hands-on approach and a strong sense of accountability., • Are team players with a flexible and positive attitude., • Have a friendly, proactive demeanor and strong problem-solving skills., • Love learning and staying ahead of technology trends. ???? Sponsorship is not available at this time. SmartVault Team Culture and Values SmartVault is a collaborative environment, where the number one goal is to solve problems for our customers. We use data to make informed decisions, and we work hard to be transparent with each other and with our customers. Our ultimate purpose is to make people’s lives better at work, so they can focus on higher-value activities in their business or personal lives. Learn more about our business and our values. Benefits of Working at SmartVault We’re striving to make SmartVault the best place to work in Houston. We work in a relaxed environment that emphasizes work/life balance. Our health benefits are top-notch, vacation time is generous, and we encourage community involvement with time off to volunteer. We also offer hybrid remote working. Learn more about our benefits. We value diversity at SmartVault, and we're committed to creating an inclusive culture where everyone can be themselves and reach their full potential. We actively encourage applications from people of all backgrounds and cultures and believe that a diverse team helps build the best products, deliver the best services, and tackle the diverse and exciting challenges we face. PRE-EMPLOYMENT CHECKS We take the security of our business and our duty of care to our customers and their data very seriously, so we need to check that you don’t have any adverse history that could pose a legitimate security risk to our business or customers. To do this, we perform background checks on you if you are offered the job. We will not discriminate unfairly against you based on any information revealed in those checks. HOW WE USE YOUR PERSONAL DATA We take data protection very seriously at GetBusy. To find out how we will use your personal data during this application process, please visit GetBusy Applicant Privacy Policy.

Job Description FPGA Design & Validation Engineer (Oil & Gas Systems) Houston, TX, USA As an FPGA Engineer in our Oil & Gas division, you will develop high-reliability digital systems for demanding environments, such as downhole drilling tools, subsea instrumentation, or refinery monitoring systems. You will leverage VHDL to implement complex data acquisition and signal processing algorithms that must operate under strict power and thermal constraints. A significant portion of this role involves hands-on lab validation to ensure system integrity before deployment in remote or hazardous field locations. Key Responsibilities: • Ruggedized Design: Implement synthesizable VHDL code optimized for low power consumption and high-temperature stability (e.g., surviving 150°ree;C+ for downhole applications)., • High-Reliability Validation: Lead hardware-in-the-loop (HIL) testing in the lab to simulate harsh field conditions. Utilize oscilloscopes, logic analyzers (ILA/SignalTap), and thermal chambers to verify timing and functional reliability., • Protocol Management: Develop and test custom and industry-standard communication bridges (e.g., Modbus, Ethernet/IP, CAN, or proprietary mud-pulse telemetry)., • Data Integrity: Design robust memory interfaces (DDR3/4) and error correction (ECC) for large-scale data logging during seismic or pipe inspection missions., • Certification Support: Maintain detailed documentation of testing protocols and validation results to support safety and industry compliance standards., • Perform functional and timing verification using respective simulators, • Conduct post-synthesis and post-layout verification. Work Experience Required Technical Skills • Language & Logic: Expert proficiency in VHDL; experience with high-reliability design techniques like triple modular redundancy (TMR) is a plus., • Tools: Expert-level use of Xilinx Vivado, Intel Quartus, Lattice FPGA or Microchip Libero., • Lab Expertise: Mastery of high-speed digital probing, power analysis (using tools like XPE), and debugging hardware-software interfaces., • Industry Interfaces: Experience with ADC/DAC interfacing (using JESD204B or LVDS) for high-precision instrumentation., • Education: B.E./M.Tech in Electrical, Electronics, or Instrumentation Engineering., • Experience: 3+ years in FPGA development, preferably with exposure to industrial automation, subsea electronics, or downhole tools., • Soft Skills: Strong analytical mindset for "root cause" debugging in complex, multi-disciplinary systems.

Job DescriptionSenior Client Solutions Architect Location: Houston, TX area strongly preferred; remote candidates in North American time zones will be considered About OLI: OLI is the global standard for electrolyte chemistry simulation, with over 50 years of peer-reviewed science embedded in its platform. More than 500 enterprises and academic institutions across 35+ countries rely on OLI software to make confident, defensible engineering decisions—predicting scale formation, modeling corrosion, simulating extraction and refining processes, and optimizing water chemistry from reservoir to wellhead to facility. Our customers include energy majors, lithium producers, NASA, and leading water treatment operators. We are building the digital infrastructure that makes complex chemistry computable, accessible, and actionable in real time. Your Role: We are hiring a Chemical Engineer with hands-on upstream oil and gas experience who combines field-tested instincts with technical rigor and strong communication skills to design chemistry-driven solutions for complex industrial systems. As a Client Solutions Architect, you will apply predictive thermodynamics using OLI Studio and OLI Flowsheet to solve real-world water and electrolyte challenges in upstream O&G environments — from produced water management and scale inhibition to wellbore chemistry and flow assurance. You will work directly with customers and partner with Sales, Product, and Client Success to translate technical insight into measurable operational and commercial value. This is a market-facing technical leadership role that directly supports growth through credible, defensible solutions built on real field understanding. We’re Looking For: Chemical Engineer Committed to Excellence You hold a degree in Chemical Engineering and take pride in doing technically rigorous, defensible work. You care about getting the chemistry right — especially under the messy, variable conditions of real production systems. Endlessly Curious and Technically Disciplined You question assumptions, validate results, and pursue root causes. You are driven to understand how and why systems behave the way they do — in the lab and in the field. Driven to Apply Chemistry Differently You are energized by using predictive modeling and simulation to solve problems others approach with guesswork. You look for more rigorous, scalable approaches to upstream chemistry challenges. Structured Problem Solver with Long-Term Ownership Mindset You convert complex customer challenges into disciplined, repeatable modeling workflows. You think beyond one-off answers and build solutions that hold up across wells, fields, and operators. Customer-Obsessed, Collaborative Communicator You explain complex chemistry clearly to both engineers and operations personnel. You work effectively across customers, sales, research, and engineering teams, and you care deeply about delivering measurable impact in the field. If these five traits are not present, this role will not be a fit. Key Responsibilities: Design and Deliver Chemistry-Driven Solutions • Use OLI Studio and OLI Flowsheet to analyze produced water, brine, and electrolyte systems in upstream O&G contexts., • Build technically sound, defensible modeling workflows aligned with real production challenges — scaling, corrosion, flow assurance, and water handling., • Interpret plant and field chemistry data and reconcile operational observations with predictive results., • Clearly articulate modeling assumptions, constraints, and implications to technical and non-technical audiences.Support Commercial Engagements, • Partner with Sales on technical discovery, qualification, and solution design for upstream O&G accounts., • Lead technical components of evaluations, pilots, and proof-of-concept engagements., • Deliver tailored demonstrations tied to operational outcomes: scale risk reduction, corrosion mitigation, treatment optimization, and cost control., • Contribute to proposals and technical value narratives.Build Vertical Expertise, • Develop depth in upstream O&G chemistry — produced water, scale management, wellbore chemistry, and corrosion engineering., • Identify recurring chemistry pain points across the upstream segment and translate them into repeatable OLI-based solution frameworks., • Represent OLI in technical discussions with operators, service companies, and engineering consultants., • Influence Product and Solutions, • Capture structured voice-of-customer insights from field and customer engagements., • Identify high-value modeling and chemistry gaps relevant to upstream operations., • Contribute to standardized solution templates and vertical offerings.Experience Required:, • B.S. in Chemical Engineering, Chemistry, or related field, • 7+ years of experience in upstream oil and gas, with direct exposure to produced water management, flow assurance, scale inhibition, or water injection systems, • Experience using OLI Studio and/or OLI Flowsheet (or demonstrated ability and strong motivation to develop proficiency quickly), • Experience presenting technical content to engineering and operations audiences, • Working knowledge of:, • Aqueous and produced water chemistry, • Scaling, precipitation, and mineral deposition, • Acid–base and carbonate systems, • Corrosion mechanisms in electrolyte and H₂S/CO₂ environments (preferred)We’re Offering:, • A chance to be part of a visionary company that is solving complex global challenges., • A collaborative and dynamic work environment where innovation is at the heart of what we do., • Competitive compensation package, including incentives and bonuses based on performance. How to Apply: Please submit your resume through JazzHR. Equal Opportunity Employer OLI is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all. Applicants will be evaluated through a structured, rubric-based interview process to ensure consistency and fairness. OLI supports equitable career progression. Advancement decisions are guided by consistent evaluation criteria and regular performance conversations. Powered by JazzHR efpILer5P1

Job DescriptionSalary: Job Description - Instrumentation and Controls Engineer BCR Environmental Corporation is a solutions company transforming the way municipalities and industrial processors treat and manage biosolids, organic wastes, and other process streams. BCR patented technologies convert organic waste and other process streams into valuable products that may be further processed or used as end products. BCR is growing rapidly because we offer solutions that lower costs and reduce risk. BCR has a significant U.S. market position as a technology innovator and leader in the municipal biosolids sector. Our Whole Solutions eliminate odor, improve regulatory compliance, simplify biosolids and organics management, and convert waste streams into renewable resources. Further, BCR is rapidly expanding into industrial markets through resource recovery projects, environmental remediation, and difficult heat transfer and processing solutions. BCR has an outstanding opportunity to add an Instrumentation and Controls Engineer to work within the company Engineering team. BCR maintains a family first culture and a fun working atmosphere, where each person contributes to a successful team. If you are looking for a place to immediately provide impact and grow in a high growth and sustainable industry - this is the place. Position Type: Full time, salaried. POSITION POSTING: Houston, TX Position Summary: Design, develop, and verify integrated industrial product control systems compliant with all regulatory requirements for BCRs OEM wastewater treatment products and industrial products. Ensure successful integration into customer operational systems and facilities. Applies knowledge and understanding of programming and troubleshooting plant controls processes and the equipment used to control those processes. Makes recommendations to improve the control of the processes or the processes themselves. Supports the maintenance of plant equipment to ensure a minimum of downtime. ESSENTIAL FUNCTIONS * Design control systems hardware and software for industrial equipment products consisting of water treatment, solids separation and handling, thermal drying, solids conveyance, and chemical injection. Interface with motors, field instrumentation, analyzers, and SCADA, satisfying all customers function needs and requirements. * Using a systems engineering framework, identify all stakeholders interacting with a product over its lifecycle and analyze needs and requirements * Work with process, mechanical, and electrical engineers, and customers system engineers to understand and optimize control designs that meet customer requirements * Analyze customer process requirements and mechanical/electrical components to design and specify required software and control system components * Design, implement, configure, test, and finalize product control designs ensuring complete and reliable performance throughout the operating life cycle; estimate product reliability values * Collect and analyze product data to recommend and implement continuous improvements on BCRs product control designs while reducing cost and increasing performance * Provide customer technical support * Incorporate supplier, customer, and user inputs to continuously improve product control ease of use while enhancing customer value * Analyze product installation and field test data (lessons learned) and incorporate those corrections/improvements into new product designs * Work as a proactive team member to continuously improve all BCRs product controls and processes * Perform risk and sensitivity analysis for product control designs and associated engineering changes * Provide manufacturing support for all product control design issues as necessary * Identifies commercial control system/software components and suppliers and recommends optimal component purchases or in-house development to meet BCRs product requirements * Designs, implements, configures, tests and debugs software/control system components for BCRs products ensuring complete and reliable product operation * Trains and instructs BCRs personnel on usage of system to track customers operations including design of reports for use by BCR or customer * Troubleshoot, modify, and test controls systems hardware and software in field settings with regards to site safety and reporting structure. * Assists in process control loop tuning, calibration, improvement, and documentation in field settings. * Trains clients in operation and troubleshooting of equipment with respect to controls. * Configures parameters and troubleshoots motor drives. * Isolates and corrects defective designs, valves, equipment, and contaminated systems, improperly working electronic units, and other malfunctions or inefficient processes. * Pull, tag, and terminate wires, installs instruments, and bend stainless steel tubing as needed in field settings. * Reads, understands, and comments on process schematics and mechanical, electrical blueprints. * Design network topology for ethernet I/O devices, remote I/O panels, connectivity to customer networks, site manager devices, data storage and reporting devices. Minimum Requirements: * BS Electrical or Controls Engineering degree preferred, others suitable with commensurate experience * 8-10 years of experience working with PLC controls, logic circuits, hydraulic, pneumatic, and electrical equipment * Excellent proficiency to read, write, and understand the English language. * Climb stairs and ladders, comfortable working at heights. * Knowledge of PLC (preferably Allen Bradley, CompactLogix or ControlLogix). * Knowledge of VFD (preferably Allen Bradley, PowerFlex). * Knowledge of Inductive Automation Ignition Platform * Available for 24-hour on-call shifts, swing, and graveyard shifts, specifically in field settings during start-up or commissioning. * Travel up to 20%, potential. * 2 years of experience in working and interacting with customers and vendors. * 2 years of experience in developing budgets, schedules, plans and forecasts. * Skilled in MS Excel, MS Word, MS Project, and MS PowerPoint * Skilled in AutoCAD Electrical Toolset for formation of electrical documentation, including wiring diagrams, single line diagrams, panel drawings, riser diagrams etc. Desired Skills: * Industrial control systems/software design and implementation including Digital I/O, Analog I/O, ladder logic, motion control, PID control, HMI, temperature, pressure and flow control, data collection and charting * 3+ years experience developing control system solutions using commercial SCADA, PLC, and industrial I/O control components (e.g., Rockwell, Siemens, GE, Schneider, Mitsubishi, Watlow, Eurotherm) * Experience with industrial network/communication technology including one or more of the following: OPC, Modbus, DeviceNet, HART, Profibus, Ethernet/IP, RS-485 * Object Oriented Software Design * Relational database design and implementation * Ergonomic and intuitive HMI (Human Machine Interface) design and implementation * Experience in developing control systems for products that support industry environmental/safety standards and municipal government regulations * Experience in speaking effectively before groups of customers or employees of organization. • Experience defining problems, collecting data, establishing facts, and drawing valid conclusions. Benefits: • Ten Paid Holidays, • 80 hours of PTO, • Benefits to include:, • Medical, • Vision, • Life Insurance, • Short Term Disability, • Long Term Disability, • 401K Equal Opportunity Employer Statement: BCR Environmental is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions at BCR Environmental are based on business needs, job requirements, and individual qualifications, without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable laws. We are committed to ensuring that all employees feel respected and valued.

Job DescriptionSalary: JOB DESCRIPTION MartianCraft has an exciting opportunity for someone that enjoys technically-challenging iOS problems and producing modern framework apps that have a direct impact on the users. SUMMARY MartianCraft does not use AI or automation to review or screen resumes. We are looking for a smart and experienced iOS engineer to work with MartianCrafts team of senior developers. This is a hybrid remote work opportunity, you will be required to be onsite in Houston Texas no less than three days a week. You must thrive in a fast-moving work environment, be able to adapt to changes quickly, anticipate business needs, and be effective with minimal structure and process. The broad range of applications and team members makes excellent communication skills a priority. This position will require reviewing code of other developers and providing written feedback as well as mentoring and coaching opportunities. SwiftUI will be an essential component of this role and we require multiple years of experience in developing and deploying SwiftUI Apps. Only US Citizens residing full-time in the United States are eligible for this opening. RESPONSIBILITIES Build advanced applications in Swift and SwiftUI Review code from other developers and provide feedback Assist with mentoring and training junior developers Collaborate with cross-functional teams to define, design, and ship new features Integrate with existing APIs and data sources Unit-test code for usability, reliability, and robustness Fix bugs and improve application performance Interact directly with client teams to determine requirements and task prioritization Use project management tools like GitHub Issues, Monday, or Jira to organize work REQUIREMENTS At least 5 years of software development experience on Apple platforms Able to quickly become familiar with large, complex code bases Highly skilled in Swift and SwiftUI Small development team leadership Strong experience with Core Data Experienced with Git Familiar with GitHub Enterprise and GitHub Actions Past experience working remotely Excellent proactive verbal and written communication skills Able to collaborate effectively with teams Able to deliver high quality work under tight deadlines Able to be onsite in Houston Offices three days per week. ADDITIONAL BENEFICIAL EXPERIENCES Previous experience in the Oil and Gas or other Energy Industries Experience working with Artificial Intelligence implementations Experience with SwiftData This is a full-time employment position with a full benefits package including medical/dental/vision/Rx insurance, paid time off, and a 401(k). This position is also available as a full time 1099 Contract position if preferred by the applicant.

Job DescriptionWHAT WE DO: Founded in 1956, Dunaway is a multidisciplinary professional services firm offering Survey, Civil and Structural Engineering, Planning + Landscape Architecture, and Construction Inspection Services (CIS), in addition to Environmental and Geographic Information Systems (GIS), SUE (Subsurface Utility Engineering), and ROW (Right-of-Way) services. For over seventy years, Dunaway has been a trusted client advisor, committed to improving lives in the communities we serve. Supported by a team of 370+ professionals with eight offices across Texas, including Fort Worth, Dallas, Austin, San Antonio, Farmersville, Houston, and Midland. WHO WE ARE: The Dunaway Difference is our three foundational components (represented by the waves in our logo): Core Values, One Heart and Profitable Growth. The combination of these three pillars creates a feeling and experience that is uniquely Dunaway. One heart, all rowing in the same direction in unison together, while continuously seeking to exemplify our core values of Integrity, Respect, Honesty, Technical Excellence, Attitude of Service, Sense of Urgency and Responsiveness in everything we do. Just like a crew race, we always look forward with the finish line in mind. Because when we win, our employees do too. Through our profitable growth, we provide opportunities, such as Profit-sharing, career advancement, and stability – just to name a few. These are just some of the reasons we were just named a Top Firm to Work for by Zweig! WHAT YOU’LL BE DOING: Are you a structural engineer with a passion for bridges? Join our team as a Structural Project Engineer – Bridges, where you’ll lead the design, inspection, and rehabilitation of bridge projects across Texas. In this role, you’ll manage small to mid-sized projects, contribute to larger, more complex initiatives, and provide technical expertise in structural performance, load paths, and rehabilitation strategies. You’ll collaborate with multidisciplinary teams, ensure compliance with TxDOT and FHWA standards, and independently seal your work while upholding rigorous QA/QC practices. You’ll also play a key role in mentoring junior engineers and technicians, while directly contributing to the safety, reliability, and longevity of Texas bridge infrastructure. Once selected to join our team, you will: • Lead the analysis, inspection review, and design of small to mid-sized bridges and transportation structures, • Perform and review in-service routine bridge safety inspections conducted by technicians, • Conduct structural analysis, load ratings, and rehabilitation design for bridge systems and components, • Evaluate inspection reports, condition ratings, and historical data to inform engineering decisions, • Prepare engineering reports, cost estimates, and construction plans, • Conduct site visits and field observations to assess bridge conditions and construction progress, • Coordinate with engineers, inspectors, technicians, and contractors to deliver safe, code-compliant projects, • Ensure QA/QC compliance and independently seal engineering work products, • Mentor and provide technical guidance to Graduate Engineers and Project Engineers, • Support technical initiatives and bridge asset management efforts, • Assist with project coordination and resource planning KNOWLEDGE: • Comprehensive understanding of bridge structural systems, including superstructures, substructures, foundations, and lateral systems, • Strong knowledge of TxDOT and FHWA bridge inspection standards and procedures, • Familiarity with AASHTO codes and bridge design manuals, • Knowledge of structural analysis, CAD/BIM tools, and bridge design software, • Understanding of load rating methodologies, rehabilitation planning, and bridge maintenance practices, • Familiarity with TxDOT bridge standards, • Working knowledge of bridge scour principles and scour plans of action, • Strong analytical and problem-solving abilities, • Excellent communication and interpersonal skills, • Proven ability to manage multiple projects and meet deadlines, • Ability to mentor and provide technical guidance, • Proficiency in Microsoft Excel and other standard engineering tools, • 5+ years of experience in structural or bridge engineering, • Minimum of 6 months of NBIS bridge inspection experience, • Preferred: At least 2 years of bridge inspection experience in Texas, along with bridge design experience, • 1+ year of experience as a licensed Professional Engineer (P.E.), • Experience with bridge load ratings, QA/QC reviews, and rehabilitation planning, • Experience preparing and reviewing recommendations for critical findings and maintenance actions, • Bachelor’s or Master’s degree in Civil or Structural Engineering (or equivalent), • Licensed Professional Engineer (P.E.) in Texas OR ability to obtain Texas licensure within six (6) months of hire (in accordance with the Texas Engineering Practice Act), • Hybrid work environment with flexible work schedules and remote work options (role dependent), • Friday afternoons off, • Competitive base compensation, • Semi‑annual, company‑wide profit‑sharing bonus program tied to firm performance, • 401(k) retirement plan with company match, • Medical, dental, and vision insurance options, • Health Savings Account (HSA) and Flexible Spending Account (FSA) options, including company HSA contributions, • Paid parental leave for eligible employees, • Paid time off starting at three weeks per year, plus paid holidays and floating holidays, • PTO exchange option, • Wellness and mental health resources, including an Employee Assistance Program (EAP), • Company‑paid life insurance and short‑ and long‑term disability coverage, • Paid military leave, • Employee referral bonus program Applicants must be legally authorized to work for Dunaway in the U.S. without employer sponsorship. We do not typically sponsor H1-B or any other work visa petitions.

Job Description Job Title: Field Engineer (Rotary Gas Meters & Electronic Index) Location: Houston, TX Schedule: On-Site Full-Time: Yes Reports to: Value Stream Manager-Electronics Role Summary/Purpose: We are seeking a Field Service Engineer to join our team, specializing in advanced gas measurement systems. This role combines hands-on field service with engineering-level troubleshooting and optimization. The ideal candidate will hold a Bachelor’s degree in Engineering (or equivalent experience) and possess deep expertise in rotary gas meters and electronic volume correctors. Candidate will serve as a technical authority for installation, calibration, and performance assurance, while collaborating with design and product teams to drive continuous improvement. Responsibilities: • Lead installation, commissioning, and calibration of rotary gas meters and electronic volume correctors at customer sites., • Diagnose and resolve complex technical issues, including firmware updates, sensor replacements, and communication module troubleshooting., • Perform advanced field audits and compliance checks to ensure accuracy and adherence to AGA/ANSI standards., • Provide engineering-level support and training to customers and internal teams on system operation and data interpretation., • Collaborate with product engineering teams to feedback field insights for design improvements and new feature development., • Develop and maintain technical documentation, including service reports and best-practice guidelines., • Support integration with SCADA systems and telemetry, ensuring reliable remote data acquisition. Requirements & Skills: • Bachelor’s degree in Electrical, Mechanical, or Instrumentation Engineering (or equivalent technical experience)., • 5+ years of experience in gas measurement systems, with strong knowledge of rotary meters and electronic volume correctors., • Proficiency in diagnostic tools, communication protocols, and software interfaces., • Strong analytical and problem-solving skills with the ability to work independently in field environments., • Excellent communication and customer service skills., • Ability to work independently and manage multiple service calls efficiently., • Experience with Dresser Measurement Products, • Familiarity with SCADA systems, telemetry, and remote data acquisition. Frequently: Use hands to handle, control, or feel objects, tools, or controls. Repeat the same motions. Bend or twist the body when operating equipment. Sit for long periods of time. Able to communicate verbally. Moderate to occasional: Lifting (1-50 pounds), walking. Dresser Utility Solutions is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description Instrument Engineer • Direct hire role in Katy area, • No sponsorships will be considered, • Mon-Friday in the office, no hybrid remote options Job Responsibilities: • Establish a "safety first" culture, • Review and mark-up of instruments on P&IDs to ensure compliance with company, client and ISA standards, • Responsible for the selection and specification of various types of instrumentation, which include transmitters, gauges, switches, etc., for Pressure, Level, Temperature & Flow applications, • Collaborate with various instrument vendors to obtain quotes and perform technical bid evaluations for all assigned instrumentation on a project, • Development of datasheets for instrumentation, • Development and review of instrument installation details, • Review of equipment packages for compliance of instrumentation with client and project specifications, • Collaborate with cross-functional teams and participate in coordination of design activities with other disciplines (Process, Mechanical, Civil/Structural, Vendor etc.) Basic Qualifications • Bachelor’s degree in electrical engineering or other engineering discipline, • Experience in the design and procurement of Instrumentation What Will Put You Ahead • Experience working with Emerson & Ashcroft instrumentation, • Experience with SmartPlant Instrumentation (SPI) Software, • Experience with Fisher control valve sizing software, • Experience with FE Sizer software, • Experience with Bluebeam Software, • Working knowledge of Codes and Standards such as API, PIP, ISA, ASME, ISO, etc. Company DescriptionTaylor Technical Services began business in 1977. Since then, we have grown to become one of the largest suppliers of Engineering personnel in the Houston/Gulf Coast area and Alaska. We pride ourselves in having recruiters and account managers that have experience and have worked in the oil & gas engineering industry. Specialties: Cad Drafters, Electrical Designers, Instrument Designers, Structural Designers, Piping Designers, Electrical Engineers, Instrument Engineers, Structural Engineers, Mechanical Engineers, Pipe Stress Engineers, EH&S, QA/QC, Procurement, Project Controls, Document Control, AdministrativeTaylor Technical Services began business in 1977. Since then, we have grown to become one of the largest suppliers of Engineering personnel in the Houston/Gulf Coast area and Alaska. We pride ourselves in having recruiters and account managers that have experience and have worked in the oil & gas engineering industry.\r\n\r\nSpecialties: Cad Drafters, Electrical Designers, Instrument Designers, Structural Designers, Piping Designers, Electrical Engineers, Instrument Engineers, Structural Engineers, Mechanical Engineers, Pipe Stress Engineers, EH&S, QA/QC, Procurement, Project Controls, Document Control, Administrative

Job Description One Tech Engineering is searching for a Senior Transmission Engineer for a position located in Houston or Austin, Texas. The Senior Transmission Engineer will lead the design of complex transmission line projects. The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in Civil Engineering or a related degree from an ABET-accredited program and 7 years of transmission engineering experience. Local candidates preferred or open to relocation. This is not a remote position. Senior Transmission Engineer Responsibilities: • Lead transmission design of projects from the conceptual phase through design completion for project needs and requirements that are set forth by the project managers including EFM, Conductor Sizing, Induction, Impedance, Losses and Voltage Drop design., • Prepare transmission equipment: packaged equipment specifications and data sheets, Request for Qualifications (RFQ's), technical bid summaries, and purchase recommendations., • Lead economic conductor selection studies, lightning performance and grounding calculations/studies., • Lead calculations for required electrical clearances based on NESC or other applicable codes and resources. Lead in the communication of the interpretation and application of necessary NERC, FERC and regional requirements and standards., • Review transmission equipment vendor drawings; data interface with suppliers, clients other engineering disciplines, detailers, designers., • Participate in development of project schedule, scope, budget staffing planning and construction planning., • Responsible for effective management of change orders., • Applies expert knowledge of commonly used transmission concepts, practices, codes and procedures within the transmission engineering services industry., • Applies knowledge and experience to complex projects, find non-standard design solutions., • Quality review production drawings for a variety of projects and project related data as required by the project managers to verify corrections are made within multiple CAD related software., • Quality review the construction administration including coordination with field personnel to resolve design related installation issues, calculations, field inspections and testing of transmission systems., • Leads field inspections, installation, measurements or calculations for public and private clients., • Prepare and present technical reports for clients and industry publications., • Build effective relationships with existing clients, customers and contractors and develop new business opportunities., • Responsible for ensuring customer satisfaction goals and expectations are met., • Participate sales and marketing efforts and identify key pursuits., • Lead the development of cost proposals and qualification statements to achieve stated targets and standards for financial performance., • Prepare and present project budgets and cost estimates., • Report project performance., • Provide leadership, guidance and instruction to the transmission engineering practice., • Mentor and guide less experienced engineers., • Responsible for QA/QC process adherence., • Responsible for effective communication with other engineering disciplines., • Responsible for compliance with company and site safety policies., • Performs other duties as assigned., • Complies with all policies and standards. Requirements of the Senior Transmission Engineer: • Bachelor's Degree in Civil Engineering or related degree from an ABET accredited program and 7 years of transmission engineering experience., • Bachelor's Degree in Civil or related Engineering Technology from an ABET accredited program and successful completion of the Fundamentals of Engineering (FE) exam and 7 years of transmission engineering experience., • Master's Degree in Engineering and 6 years of transmission engineering experience., • Expert knowledge in standard engineering techniques and procedures., • Strong knowledge of transmission design codes and computer skills (e.g. AutoCAD, MicroStation, BIM (Revit), Civil 3D, PLS, PLS-CADD, RISA-3D, MathCADD), and/or hydraulic, hydrologic, pavement, transmission analysis programs., • Strong attention to detail, facilitation, team building, collabor

Job Description Synthesis Health Who We Are We're a mission- and values-driven company with tremendous dedication to our customers. Our 100% remote team is dedicated to a common goal – to revolutionize healthcare through innovation, collaboration, and commitment to our core values and behaviors. About the Opportunity We are looking for a Principal Platform Engineer to serve as a hands-on architect of our system's evolution. In this role, you will tackle our most substantial engineering challenges: ensuring the reliability, performance, and scalability of our distributed systems while driving the maturation of our technical stack. This is a leadership role for a hands-on technical visionary. You will focus on solving deep, structural problems in the overall system to achieve 99.99% reliability and massive scalability. You will drive key maturation issues regarding our architecture, identifying the critical path for eliminating bottlenecks, reducing complexity, and enabling our engineering teams to ship faster with greater confidence. As a key voice on the Architecture Review Board (ARB), you will shape the technical direction of the entire organization. If you are an expert in high-scale distributed systems and have the scars and success stories to prove it, this is your chance to build a legacy. Key Responsibilities System Reliability, Performance, & Scalability • Solve Substantial System Challenges: You will identify and lead the resolution of the most complex, systemic problems affecting our platform's stability and speed., • Architect for Scale: You will design the strategies that allow our system to handle exponential growth, focusing on database scaling, caching architectures, and asynchronous processing throughput., • Drive Technical Evolution: You will lead the maturation of our technical stack, ensuring our libraries, frameworks, and infrastructure choices evolve to meet future business needs., • Eliminate Structural Bottlenecks: You will look beyond code-level optimization to solve structural issues in our database layer, messaging infrastructure, and deployment pipeline., • Cross-Organizational Impact: You will influence the technical direction across multiple product areas, reconciling conflicting architectural goals to serve the broader business., • Elevate the Platform: You will mentor Staff and Senior engineers, helping them understand distributed consensus, eventual consistency, and the trade-offs of complex distributed systems. What We're Looking For • Elite Distributed Systems Experience: 10+ years of software engineering experience, with a heavy focus on designing, optimizing, and operating high-scale distributed systems., • Architectural Evolution: You have a proven track record of evolving complex systems and driving technical maturity in a fast-paced environment., • Language Fluency & Strategy: Deep expertise in TypeScript/Node.js is required. As we pivot performance-critical paths toward Go, experience leading similar language transitions or strong Go proficiency is highly desirable., • Deep Technical Mastery:, • Expertise in defining Service Level Objectives (SLOs) and Error Budgets., • Deep knowledge of synchronous (Websockets, gRPC, REST) vs. asynchronous (Kafka/PubSub) communication patterns., • Advanced database design patterns (sharding, partitioning, CQRS)., • Expertise in container orchestration (Kubernetes) at scale., • Visionary Leadership: You can identify critical long-term technical challenges months or years in advance and mobilize the organization to address them., • Healthcare Domain Experience: Experience in healhtech or regulated industries is a plus., • Compliance & Standards: Deep familiarity with healthcare data standards (DICOM, HL7, FHIR) and compliance regulations (HIPAA) is a significant advantage., • High-Performance Database Tuning: Deep experience tuning PostgreSQL or similar relational databases for massive concurrency., • Breaking Up The Monolith: Experience migrating a monolithic database architecture to microservices is a plus. Why You Should Join Us • Solve Our Toughest Puzzles: This is a high-leverage role. You will be working on the most impactful technical challenges that are critical to the company's success., • Define the Architecture: You won't just be maintaining a system; you will be a primary author of its future state, with the autonomy to make it happen., • Lead from the Front: This is a chance to establish yourself as a key technical voice in a rapidly growing company., • Clinical service first., • Collaborate with our customers., • Listen, respect, learn., • Be nice., • Be creative., • Be honest. Typical salary range for this position is $170,000 - $205,000. However, Synthesis participates in location based hiring and salary ranges can be adjusted based on candidate's residence. Other benefits include, but are not limited to: Medical, Dental, Vision, "Use as needed" vacation policy, and participation in our employee option program. Synthesis Health is an Equal Employment/Affirmative Action employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law.

Job Description Engineer II Deutsche Windtechnik is Germany’s largest Independent Service Provider, offering a comprehensive service package for Wind Turbine Generators (WTG) from one single source. With more than 9,000 WTGs under contract and more than 2,200 worldwide employees operating in Europe, the US and Asia, Deutsche Windtechnik sets the bar for Independent Service Provider services. Deutsche Windtechnik came to North America and started operations here in 2018. Headquartered in Houston, TX., it is our goal to set the standard for best-in-class levels of quality, safety, efficiency, and customer service in the US market. Ready to be an important part of our Global Engineering Team? The Engineer II is a mid-level engineering role responsible for performing technical tasks, solving moderately complex problems, and supporting project execution in line with organizational objectives. This position works under limited supervision, applying engineering principles to design, develop, analyze, and maintain systems, components, or processes. The Engineer II collaborates with cross-functional teams, mentors junior engineers, and is critical in ensuring project success. Are You Looking to: • Provide first- and second-level support for troubleshooting, fault analysis, and error investigations in coordination with Head Quarters Engineering?, • Serve as a liaison with the Global Engineering team for all engineering-related matters?, • Perform remote fault analysis and error investigations?, • Lead and support technical root cause analysis for component failures?, • Stay current with industry advancements by attending relevant workshops and training sessions?, • Assist in planning and executing engineering projects, ensuring milestones and deadlines are met while maintaining quality standards?, • Identify and troubleshoot technical issues, propose effective solutions, and implement corrective actions as needed?, • Prepare and maintain technical reports, specifications, drawings, and other documentation to ensure compliance with organizational and regulatory requirements?, • Work closely with cross-functional teams, including design, manufacturing, quality, and supply chain, to ensure seamless project execution?, • Identify opportunities to improve processes, products, or systems and contribute to the implementation of efficiency-enhancing initiatives?Are You Ready to:, • Support the supply chain team by identifying qualified vendors for turbine components in the U.S., • Develop and execute strategic and tactical plans to achieve internal cost-reduction targets., • Assist with SCADA-related tasks in collaboration with Head Qaurter Engineering., • Prepare repair reports to ensure processes, materials, and quality standards align with Deutsche Windtechnik’s guidelines., • Analyze fleet performance data to optimize turbine performance and increase the mean time between failures., • Develop, maintain, and update repair work instructions for use at U.S. sites., • Ensure all engineering work adheres to applicable codes, standards, and regulations., • Provide technical guidance and mentorship to junior engineers and technicians to enhance team capability and knowledge., • Bachelor's degree in Engineering (Mechanical, Electrical, Civil, or related discipline)., • 2–5 years of relevant engineering experience, preferably in the applicable industry., • Able to quickly adapt to different technical situations by using technical documentation, schematics or self-gathered information due to investigation and system reviews, • Strong knowledge of system design, • Ability to understand complex electrical systems and functions by reading circuit diagrams and/or schematics, • Valid driving license, • Strong interpersonal skills for collaboration with field technicians or engineering colleagues, • Experience handling customer communication, • Able to pass a physical exam and drug/alcohol screening, • We care about the safety and wellbeing of every one of our employees. To help ensure their safety, any employees climbing a wind turbine must use a Personal Fall Arrest System, and may not exceed the system’s maximum weight capacity of 309 lbs. This weight must include the individual, their tooling, uniform, and personal protective equipment. Based on these safety requirements and the standard weight of equipment, employees who climb wind turbines may not exceed a maximum personal body weight of 260 lbs.What You’ll Get:, • 401k with fully vested, generous company match available after 6 months., • Generous PTO, Excellent Medical/Dental/Vision Benefits., • Competitive Compensation. Our Mission: To be the most trusted O&M partner to wind farm owners. Our Vision: To empower the Americas’ achievement of 100% renewable energy, one wind turbine at a time. How do we accomplish this? By building a team and a culture with the core values that are: Transparent, Innovative, Guiding (advisor and partner), Efficient, and Reliable. We call ourselves TIGERs and we hope you get an opportunity to join us someday! Equal Employment Opportunity Statement Deutsche Windtechnik is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, protected veteran or military status, and other categories protected by federal, state or local law. EEO is the Law Applicants and employees are protected under Federal law from discrimination. Powered by JazzHR miNmJBmNUo

Job DescriptionDescription: Systems Engineer – Golang Focus Advanced Sentry is seeking a talented and motivated Systems Engineer with strong expertise in Golang to join our dynamic team. This role offers an exciting opportunity to contribute to the development of distributed backend systems that operate at internet scale, supporting security and trust initiatives across large-scale platforms. If you are passionate about building reliable, scalable, and high-performance backend services, we invite you to become part of our innovative environment. Key Responsibilities • Design, develop, and maintain distributed backend services and APIs using Golang, • Debug and troubleshoot complex distributed systems to ensure high availability and performance, • Build scalable infrastructure to support real-time data processing and security workflows, • Collaborate with cross-functional teams to define system requirements and optimize architecture, • Monitor system performance, identify bottlenecks, and implement improvements, • Participate in code reviews, testing, and documentation to uphold quality standards, • Support deployment, operation, and maintenance of backend systems in a production environment Skills and Qualifications • Proven experience developing production-grade Golang services, • Strong understanding of distributed systems, microservices architecture, and scalable backend design, • Experience debugging and troubleshooting complex distributed environments, • Familiarity with cloud platforms, containerization, and orchestration tools (e.g., Kubernetes), • Knowledge of security protocols, real-time data processing, and high-availability systems, • Excellent problem-solving skills and ability to work collaboratively in a team, • Strong communication skills and a proactive approach to technical challenges, • Bachelor’s degree in Computer Science, Engineering, or related field, or equivalent practical experience At Advanced Sentry, we foster a culture of innovation, continuous learning, and growth. We offer a flexible remote work environment within the United States, with a preference for candidates located in Houston, TX, or the Central Time Zone. Join us to be part of a forward-thinking company dedicated to building impactful security solutions and advancing your career in a supportive, collaborative setting. Requirements: • 2–6 years professional software engineering experience, • Production experience programming in Golang (Go), • Experience building backend APIs or distributed systems, • Experience working with SQL databases (PostgreSQL preferred), • Experience debugging production systems, • Understanding of HTTP APIs and service architecture

Job DescriptionProject Interface Coordinator – I & C POSITION DESCRIPTIONMUST HAVE I&C EXPERIENCE. Your responsibilities will encompass essential project and engineering management duties, emphasizing the establishment of an execution framework that aligns with interface management responsibilities, safety, and quality.Interface management/coordination in projects is crucial for ensuring that different components of a project work together seamlessly. It focuses on managing the interactions between various project scopes, which might include different systems, teams, or contractors. This includes: • Defining Interfaces: This involves identifying and defining the points of interaction between different components of the construction project, such as between electrical and mechanical systems or between construction phases., • Coordination and Communication: Ensuring that there is clear communication and coordination between different teams or systems that interact. This might involve regular meetings, detailed documentation, and the use of collaborative tools., • Resolving Conflicts: Interface management also includes resolving conflicts that arise from overlapping work or misalignments between different scopes of the project. This can involve mediation and adjustments to schedules or plans., • Documentation: Keeping detailed records of how interfaces are managed is important. This documentation helps in understanding the flow of the project and is crucial for resolving any disputes that may arise., • Lead the development of interface management strategy and plan, identifying, documenting, and closing out interfaces in a structured manner., • Define the approach to identifying, documenting, and closing out interfaces, ensuring an organized process., • Maintain the interface system of record and interface tables/matrices with the most current, accurate information regarding status of interface agreements and interface points., • Schedule and lead regular meetings and teleconferences to achieve alignment or enhance information sharing for each respective scope of interfaces., • The Interface Coordinator must work with the Fluor project team, Client, and external stakeholders to ensure that both internal and external interfaces are identified, addressed and appropriate procedures are integrated into the overall interface management plan., • Establish and maintain clear communication channels and protocols for each respective scope interface., • Schedule and lead regular meetings and teleconferences to achieve alignment and enhance information sharing., • Proactively initiate actions to expedite interfacing technical contacts and external stakeholders, • Collaborate with stakeholders to define interface requirements and expectations., • Present and explain interface management work processes to relevant internal and external stakeholders, including Fluor project teams, clients, licensors, EPC contractors, third parties, and government agencies.Minimum Qualifications:, • Candidate must be a U.S. Citizen., • Must have I&C experience., • EPC experience (Engineering, Procurement, and Construction)., • Ability to work in a diverse work environment., • Satisfactory results of a pre-employment screening, which includes a background check and drug screening., • Proactive and goal-oriented with the initiative to positively influence events., • Proficient in problem-solving, particularly in complex project or business environments., • Strong analytical skills and the ability to identify potential solutions., • Technical and business writing proficiency., • Basic computer and software skills, including word processing, email, spreadsheets, and electronic presentations., • Establish and maintain high standards of self-performance with responsibility and accountability for successfully completing assignments and tasks., • Set and maintain high standards for project interface management in terms of quality, timeliness, and overall success.Additional Considerations:, • International project or area management experience in diverse cultural environments is highly valued., • Emphasis on diversity and inclusion initiatives within engineering management.Preferred Qualifications:, • Seven (7) years of experience in a significant project role, demonstrating expertise in interface management, project controls, and design or construction engineering., • Successful track record as a Project Manager or Project Engineer on large or mega-sized engineering, procurement, fabrication, and construction/construction management (EPFC/CM) projects., • Certification in project management, such as Project Management Professional (PMP), is highly recommended. CONTRACT DURATIONOne (1) year with the possibility of extension/conversion.

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Senior Project Manager to join our Water Team to improve infrastructure in our Dallas/Fort Worth office. Candidates should have a bachelor's degree in civil or environmental engineering, fifteen or more years of water resources design and project management experience and a PE license. Experience using Microsoft Office and design software and excellent verbal and written communication skills is also required. A flexible hybrid-remote work schedule available after 90 days of employment. A flexible hybrid-remote work schedule available after 30 days of employment.Typical responsibilities include: • Provide project management, technical planning, design and construction support on various stormwater, water and wastewater treatment and collection system projects, • Become the client manager for targeted key clients, • Actively participate in improving Wade Trim"s visibility and brand, • Prepare engineering calculations and supporting analysis of alternatives, • Develop and complete applications, permits, engineering reports and specifications, • Prepare and review engineer estimates, • Prepare design cost estimates, • Conduct research and development for projects, • Monitor task budget and progress, • Prepare project status and other reports, • Communicate project details with other design engineers, • Conduct project cost reviews, • Promote sales, • Prepare and review scope, budget and schedule for project tasks, • Assist with proposals, marketing, project reports and technical presentations, • Conduct on-site inspections as needed, • Attend and/or conduct client and project meetings, • Attend various meetings including pre-design, plan review, pre-construction, professional organization, staff, etc., • Attend seminars and/or training classes, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering required, • Master's Degree in Civil or Environmental Engineering preferredSkills/Experience:, • 15+ years of related experience required, • Licensed Professional Engineer required, • Preferred experience in Pump Station Design, Pipeline Design, or Water/Wastewater Treatment

Job DescriptionAbout OptiSigns OptiSigns is a Houston-based B2B SaaS company that helps more than 22,000 businesses engage customers and employees through intuitive digital-screen solutions. We believe great software should feel effortless—even to non-technical users—and that thoughtful design is as critical as solid engineering. Why this role exists We’re expanding our product line and need a craft-obsessed engineer who can own the entire front-end experience—from Figma designs to pixel-perfect production code. If you love sweating the details of typography and motion and thrive in a codebase, you’ll fit right in. What you’ll do 40% – Design delightful UIs in Figma: information architecture, low- to hi-fi mock-ups, interactive prototypes, component libraries, accessibility states, and responsive breakpoints. 40% – Build the designs using modern HTML, semantic CSS/SCSS (or Tailwind), TypeScript, and React (Next.js) or Angular. Maintain a clean, reusable component system. 10% – User-test & iterate: run quick usability tests, interpret analytics/heatmaps, and turn findings into improvements. 10% – Collaborate & ship: work with product managers, full-stack/backend engineers, and QA to deliver features end-to-end, review PRs, and improve our DX tooling (Storybook, ESLint, Husky, etc.). Requirements What you bring • 0–3 years building customer-facing web apps (portfolio or live products required)., • Mastery of Figma (auto-layout, variants, design tokens, FigJam)., • Production experience with React or Angular, modern TypeScript, and component architectures., • Deep understanding of HTML semantics, CSS layouts (Flexbox / Grid), responsive design, accessibility (WCAG 2.2), and performance optimizations., • Familiarity with design systems (Material, Ant, Radix, or your own), animation libraries (Framer Motion, GSAP), and testing (Jest, Testing Library, Cypress)., • Comfort working in an Agile, CI/CD environment (GitLab CI/CD, Vercel/AWS)., • A user-centric mindset—ability to translate business goals into intuitive flows and elegant interactions., • Excellent written & verbal communication. Bonus points, • Experience with data-heavy dashboards or B2B SaaS UX., • Knowledge of Node.js, • Medical, dental, and vision insurance, • Flexible schedule & remote-friendly culture (Houston HQ for those who prefer in-office), • Generous PTO & paid holidays, • 401(k) with match (coming 2025), • Monthly learning stipend (courses, conferences, books), • Latest MacBook Pro / dev setup of your choice We review every application personally and respond within a week. Ready to craft experiences that thousands of businesses use every day? Apply now and let’s build something beautiful together.

Job Description Why Synthesis Health? At Synthesis Health, we don't just build software, we reimagine the infrastructure that powers medical imaging. Our cloud-native platform connects hospitals, imaging centers, and clinicians to real-time, actionable imaging data with unprecedented speed and intelligence. We believe that imaging should just work—no more clunky interfaces, slow PACS systems, or outdated workflows. We're engineers, doctors, and builders who thrive at the intersection of healthcare and technology. What This Role Is (and isn't) This isn't your typical "integration analyst" role pushing HL7 messages down a pipe. We're looking for a technical integrator and problem solver who thrives in messy healthcare environments and wants to fix real-world problems with elegant, repeatable solutions. You'll deploy and integrate our imaging software in high-stakes clinical environments, build scalable data pipelines, and drive interoperability between our platform and hospital IT systems like PACS, RIS, VNAs, and EHRs. What You'll Actually Do • Lead DICOM-based integration projects end to end—from initial customer engagement to go-live., • Interface with hospital PACS, RIS, and imaging teams to analyze and optimize radiology workflows., • Build data pipelines that normalize and route imaging metadata using modern tools and cloud-native practices., • Own integration tooling: from deployment scripts to diagnostic logs to Pub/Sub services., • Use messaging protocols (DICOM, HL7, IHE, Pub/Sub) to enable deep interoperability across the imaging ecosystem., • Create repeatable and documented internal processes that reduce onboarding time and deployment friction., • Be part of the on-call L3 triage rotation—because if imaging breaks, patient care can stop. You'll help fix that., • Collaborate with product and engineering teams to make our platform smarter, faster, and more intuitive., • 3–5+ years in a technical healthcare IT role (Integration Engineer, PACS Admin, Systems Analyst, or similar)., • Mastery of DICOM (this is non-negotiable)—image routing, metadata structures, and interoperability quirks., • Familiarity with PACS/VNA environments and deep knowledge of clinical imaging workflows., • Experience with Mirth Connect, integration engines, or scripting your way through HL7 challenges., • Programming skills in languages like Python, JavaScript, or similar., • Experience with PostgreSQL, cloud-based storage, and modern deployment pipelines., • You speak both "developer" and "radiologist" fluently—and can translate between them., • Have deployed or maintained imaging platforms in hospital environments., • Know your way around message queues, Pub/Sub, and microservices architecture., • Understand CI/CD workflows, containerization (Docker), and basic observability/monitoring practices., • Real-world impact: Every integration you deploy directly improves patient care and clinician experience., • Fast, modern stack: Cloud-native, agile, and unburdened by legacy tech debt., • No corporate fluff: You'll work with a small, senior team that values autonomy and results., • Remote-first: Work from anywhere in the U.S/Canada with flexibility and trust., • Mission-first culture: We're here to fix healthcare tech—and we actually mean it., • Compensation: Synthesis has a location-based compensation plan. Compensation is determined by the market rates of the employee's country of residence. For US employees the salary range is $90,000 - $120,000 per year. If you're tired of integrating the same tired systems with little impact and want to solve meaningful problems in clinical environments, let's talk. Apply now and help us build the future of medical imaging infrastructure. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description Job Description: This position is responsible for developing, modifying, and maintaining all test software/hardware tasks and resources to support production manufacturing. Office located in Houston, not remote, hybrid; expected in office during workday. Duties and Responsibilities: • Work with Test Development Engineer to develop test scripts, implement test plan, and smoothly carry out new production testing for mass production., • Sustaining test related issues for production and work with internal team and customer for rootcause analysis as well as improvement., • Monitor test failure trends in production and provide corrective actions to improve production test yields., • Setup and maintain production test equipment such as UCS Servers, Terminal Servers, Switches, Power cycle boxes, Hipot machines, etc., • Interface with customers and internal cross-functional teams to solve all testing-related issues., • Come up with testing related improvement projects and be able to carry out the project for good execution and drive end result., • Train Technicians and Testers on new and existing testing procedures and product troubleshooting., • Manufacturing/Production Testing experiences is must., • Hands on Python Programming experiences is must., • Experience in troubleshooting hardware and software issues with in a Linux/Unix/Windows environment is must., • Other industrial test scripting & programming experiences is preferred., • Experience in RESTFUL web services is a plus., • An excellent communication (written and verbal) skill is must., • Must have a strong customer service/satisfaction attitude, • Bachelor’s degree in Electrical Engineering is required, • CCNA certified or above is a plus, • Manufacturing experience is a plus Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR Cpu3wTlq9u

Job Description Digi Security Systems is an industry leader in the design, installation and support of custom video surveillance, electronic access control, intrusion detection and fire solutions for companies of all sizes. We've built our reputation on innovation and reliable service, and we're known as the industry's experts. Position Overview We are seeking a detail-oriented Solutions Engineer with expertise in the low voltage physical security industry to join our Houston team. At Digi, our Solutions Engineers translate customer requirements into detailed, code-compliant, profitable low-voltage systems designs and provide the technical backbone to every sale. The ideal candidate will have strong technical knowledge of low voltage systems, particularly in CCTV, access control, and intrusion detection systems, a keen eye for detail, and the ability to apply technical knowledge to customer needs. This individual must have an expert background in the components of Access Control, CCTV, and Burglar/Intrusion Alarm Systems and at least five (5) years of experience working in the commercial security systems field. Key Responsibilities: Site Design and Technical Solutions: • Develop site-specific designs for low voltage electrical systems (access control, CCTV, intrusion, etc.), ensuring compliance with industry standards and regulations., • Create detailed technical drawings, layouts, and schematics that meet project requirements., • Perform site walks to assess jobs in real-time and deliver accurate quotes., • Provide product demonstrations, digital sales rooms, and walkthroughs via remote webinars and onsite presentations., • Engage with partners early in the project cycle to understand their needs and position our solutions effectively., • Support Digi Account Managers by providing technical expertise when analyzing customer requirements and project specifications during the quoting phase., • Support and assist in demo system product deployments on-site., • Collaborate with field teams to ensure design intent and answer project implementation questions., • Education – High School Diploma or equivalent, • 5 Year minimum electronic security systems/low voltage electrical experience, • Strong technical knowledge of low voltage electrical systems, particularly physical security systems, and design principles., • Clear verbal and written communication, prompt and organized manner., • Ability to manage multiple projects and deadlines simultaneously., • Physical ability to stand on feet for multiple hours at a time and navigate job sites for design site walks., • Physical ability to use a computer for multiple hours at a time., • In-person role based in office located in Richardson., • Willingness to travel to customer sites as needed., • Ability to utilize AUTOCAD and PDF editing software such as Adobe Suite or Bluebeam Revu, • Experience with ConnectWise Manage or other project management ticket based platform

Job Description One Tech Engineering is searching for a Senior Environmental Engineer for a position located in Houston, Dallas, Fort Worth, or Austin, Texas.. The Senior Environmental Engineer will lead and support a wide variety of environmental engineering projects, including stormwater management, hydraulic analyses, solid waste, remediation, sustainable solutions, design of environmental systems such as containment liners and water quality/treatment systems, and site development for buildings/facilities. The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree and 7 years of environmental or civil engineering experience. Local candidates preferred or open to relocation. This is not a remote position. Senior Environmental Engineer Responsibilities: • Providing technical solutions for environmental or civil engineering projects., • Performing calculations using industry-standard tools and software., • Directing and reviewing work products prepared by junior engineering staff, which may include Preliminary Engineering Reports, Options Evaluations, Design Drawings, Calculations, Specifications, Work Plans, Construction Reports, and Cost Estimates., • Design programs such as AutoCAD, Civil 3D, GIS, etc., • Design of environmental systems and facilities., • Lead or support of environmental or civil projects or tasks which may include earthwork/grading, stormwater, wastewater, remediation, waste management, and restoration., • Preparing reports, studies, and cost estimates to help clients evaluate options and provide solutions., • Project management duties such as developing and executing project scope, budget, schedule, quality, safety, and client expectations., • Lead oversight of construction and preparation of construction quality assurance (CQA) reports., • Internal and External Oral Presentations., • Will train and mentor staff., • Develop new and maintain existing client and regulatory relationships., • Experience overseeing construction and strong understanding of construction methods and procedures preferred., • Project management or assistant project management experience preferred., • Available for travel as necessary (approximately 10% travel)., • Strong knowledge in standard environmental engineering techniques and procedures., • Excellent written and verbal communication skills., • Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.

Job Description Job Title: CAD Drafter/Designer II Job Description We are seeking a skilled CAD Drafter/Designer II to join our team in the Distribution group. The role involves completing drafting assignments on various types of electrical and control drawings, supporting remote office CAD workloads, and coordinating with CAD leads across different locations. Responsibilities • Complete drafting assignments on Protection & Control, SCADA, and Communications drawings, including Single Line Diagrams, Schematics, and Control Building Layouts., • Draft Physical Electrical drawings such as General Arrangement, Electrical Plans, and Structural Details., • Support remote office overflow CAD workload, coordinating with other CAD leads., • Associate degree from an accredited institution preferred, or a high school diploma/Drafting certificate with additional experience., • 6 months or more of drafting and detailing experience with AutoCAD and/or Microstation., • Knowledge of drafting principles, techniques, and procedures., • Proficiency with vector and raster drawing files manipulation in AutoCAD and MicroStation., • Strong professional verbal and written communication skills within a team environment., • Experience working in a utility doing distribution drafting is preferred., • Experience with file sharing, document management, and collaboration tools such as ProjectWise, FTP, and SharePoint., • Ability to understand and implement a wide range of client CAD standards., • Experience with 3-D modelling in Autodesk Revit, Inventor, Autocad, Bentley Open Utilities, and MicroStation. The work environment involves a fast-paced engineering/production setting that requires proficiency with Windows operating systems and Microsoft Office products such as Word, Excel, and Outlook. The role demands strong communication and organizational skills to efficiently manage tasks Job Type & Location This is a Contract to Hire position based out of Houston, TX. Pay and Benefits The pay range for this position is $24.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Overview The Tyndale Company is seeking a Platform Engineer to join our dynamic IT department. The Platform Engineer (Developer Enablement) acts as a senior technical contributor focused on accelerating software development through standardization, automation, and shared tooling. This role improves how developers write, structure, and maintain code—driving consistency, quality, and throughput across all teams. Operating between development, DevOps, QA, and architecture, the Platform Engineer defines and maintains internal frameworks, reusable components, and automated guardrails that enforce Tyndale’s engineering standards. HYBRID/REMOTE: Tyndale supports a strong work-life balance. This opportunity requires onsite work a minimum of 1 day per week, and 4 days per week remotely. To be considered, candidates must reside within a commutable distance from our corporate headquarters in Pipersville, PA (Bucks County) or our location in Houston, TX (City Centre). About Tyndale The Tyndale Company is a private, 9x Top Workplace winner in PA and 5x winner in TX, and an industry leading national supplier of arc-rated flame-resistant clothing (FRC) to the energy sector – including utilities, oil and gas, transportation, chemical manufacturing, and NFPA 70E markets. We’re a family-owned business providing a retail-style apparel experience to hundreds of thousands of energy workers across the US and Canada. We’re the leading distributor of innovative FRC solutions, and the largest industrial supplier of Carhartt FR, Ariat FR, and Wrangler FR clothing. Responsibilities Framework and Tooling Development • Design and maintain internal libraries, NuGet packages, and reusable UI components for consistent logging, error handling, validation, and security., • Develop service templates, scaffolding, and code generators that accelerate application startup and reduce boilerplate., • Manage and evolve shared frameworks for observability, authentication, and health checks. Code Quality and Standards Enforcement • Define and enforce coding, naming, and validation standards through SonarQube rules, lint configurations, and automated pipeline gates., • Partner with the Production Control Lead to align service standards and release readiness checks with coding guardrails., • Establish patterns for consistent exception handling, structured logging, and telemetry across systems. Developer Experience and Productivity • Build internal tools and automation that improve daily developer efficiency (template creation, dependency scanning, project setup)., • Create documentation and onboarding materials to promote the “golden path” for new services., • Participate in and review cross-cutting code to ensure adherence to architectural and quality standards. Collaboration and Mentorship • Serve as a coach and technical mentor to developers, promoting shared learning and consistent implementation practices., • Work with DevOps, QA, and architecture to ensure cross-team compatibility and efficient delivery. Qualifications • Minimum of 10 years of software engineering experience with at least 3 years focused on frameworks, tooling, or developer productivity., • Bachelor’s degree in computer science or related field, or equivalent technical training., • Strong experience in C# and .NET application architecture., • Experience developing shared internal libraries, NuGet packages, and CI/CD pipeline integrations., • Familiarity with SonarQube, code analysis tools, and coding standard enforcement., • Experience automating scaffolding, code generation, or development environment setup preferred., • Strong understanding of logging, telemetry, and observability best practices., • Experience with Dynatrace, Serrilog, Microsoft Orleans, and Temporal preferred, • Familiarity with front-end component reuse (Angular, Blazor, or similar) a plus., • Self-motivated, detail-oriented, and capable of influencing cross-team engineering practices. Benefits • Health & Wellness: Comprehensive medical, dental, and vision insurance with competitive premiums. Paid parental leave. Mental health support through an EAP and partial reimbursement on copays, fertility support, and robust wellness programs with annual reimbursements., • Work-Life Balance: Many positions with Tyndale offer hybrid onsite + remote work schedules, generous PTO, paid holidays + a floating holiday, and more., • Financial Compensation: Competitive salary, 401(k) with matching, and bonus opportunities., • Career Growth & Development: Training/certification/tuition reimbursement programs and demonstrated paths for knowledge share and internal promotion opportunity., • Culture & Perks: Family-owned values, award winning culture, team-engagement events, casual dress code, company-sponsored charitable events and activities, and an inclusive workplace that values collaboration and integrity. Qualified candidates are encouraged to apply on our website, . E.O.E #LI-SP1 #LI-Hybrid

Job Description Job Title: Structural / Civil Engineer (Scaffolding Design) Location: Houston, TX (Hybrid / Remote Flexibility) Position Overview: We are seeking a Structural or Civil Engineer with proven experience in scaffolding and temporary structures design to support complex industrial and commercial projects across the U.S. and Canada. This role will focus on the structural analysis, design, and validation of scaffold systems, ensuring compliance with applicable codes, safety standards, and client specifications. The ideal candidate brings strong technical expertise, proficiency in design software such as AutoCAD and Scaffold Builder (or similar), and the ability to develop efficient, constructible solutions in a fast-paced project environment. Key Responsibilities: • Perform structural analysis and design of scaffolding and temporary access systems, including load calculations (dead, live, wind, and dynamic loads), • Develop detailed engineering drawings, layouts, and erection plans using AutoCAD and/or Scaffold Builder, • Ensure all scaffold designs meet OSHA regulations, local codes, and applicable engineering standards, • Review and approve design packages, calculations, and drawings for accuracy and compliance, • Collaborate with project managers, field operations, and clients to develop practical and cost-effective design solutions, • Provide technical support during planning, erection, and dismantling phases of scaffold systems, • Conduct site visits, field assessments, and inspections as needed, • Evaluate existing structures and interface conditions to ensure scaffold compatibility and safety, • Bachelor’s degree in civil engineering, Structural Engineering, or a related discipline, • 3+ years of experience in scaffolding design, temporary structures, or structural engineering, • Proficiency in AutoCAD and/or Scaffold Builder (or equivalent design/analysis software), • Strong understanding of structural analysis principles and load path behavior, • Familiarity with OSHA standards and industry regulations related to scaffolding and temporary work, • Experience working with industrial projects (refineries, plants, or commercial construction) preferred, • EIT required; PE license preferred or in progress, • Hybrid or remote work flexibility, with preference for candidates located in Houston or surrounding areas, • Competitive salary based on experience, • Flexible work environment, • Opportunity to work on complex, large-scale projects, • Comprehensive benefits package including medical, dental, vision, and 401(k) with company match.

Job Description Do you want to be part of a team where we work collaboratively to achieve our goals? Do you enjoy working in an innovative and growth focused environment? A company that invests in its equipment and its team members? Then Hydro-Thermal is the company for you! At Hydro-Thermal Corporation success is attributed to people who are committed to technical competence, are responsive to customers' needs, are friendly, are willing to work hard, have complete integrity, and are active in our industry and in the local communities. The Regional Sales Manager is primarily responsible for developing and securing strategic sales opportunities for HTC’s direct steam injection (DSI) technology for general industrial heat transfer applications in their region. This includes: • Increasing the region’s market share, revenue growth and customer base by securing installations in targeted applications;, • Providing market development and technical sales support for existing sales channel partners;, • Establishing additional sales channel partners that service open geographic areas, or niche market segments; Primary Responsibilities: • Develop a comprehensive regional sales plan in respective industry that details programs and strategies to achieve and surpass annual HTC financial goals, business objectives, and personal objectives., • Prior to the start of each fiscal year, meet with each channel partner to develop their annual HTC marketing plan to meet respective quotas – review progress on a quarterly basis., • Increase HTC “mindshare” with each sales channel partner to establish stronger preference for presenting DSI for heat transfer applications., • Ensure that sales leads, are followed and that their disposition is adequately documented in SalesLogix., • Evaluate new channel partners to replace ineffective ones, and/or to drive further penetration into niche markets or new geographic areas., • Conduct joint sales calls to ensure that the HTC product line is properly presented and to provide assistance in developing the market., • Minimum qualifications – BA Business Administration, BS Mechanical or Chemical Engineering degree., • Between 7-10 years of experience with managing a comprehensive sales process for technical, engineered products and capital equipment., • Successful achievement of increasing annual sales quotas for a multi-state region., • Sales management responsibility for developing a results-oriented network of industrial sales channel partners (manufacturers’ representatives, distributors),, • Sales experience with original equipment manufacturers (OEM’s) and national accounts. Benefits: In addition to your base compensation, you are provided with a wide range of benefit programs which are designed to enhance the quality of your life, to provide protection and help when some of life's problems may occur. • Continuing Education/Tuition Reimbursement, • Vacation and Personal Time Off and paid Holidays, • Health, Dental and Vision Insurance, • 401k with company match EEO Statement Hydro-Thermal Corporation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state and local laws. #LI-Remote

Job DescriptionSynthesis HealthWho We Are We're a mission- and values-driven company with tremendous dedication to our customers. Our 100% remote team is dedicated to a common goal – to revolutionize healthcare through innovation, collaboration, and commitment to our core values and behaviors. At Synthesis Health, we are committed to transforming healthcare through innovative technology, leveraging AI/ML and scalable, native cloud architectures to build solutions that make a meaningful difference. Our engineering team is at the heart of this mission, and we are looking for individuals who are passionate about building secure, scalable, and compliant systems. About the Opportunity We are looking for an experienced Sr. Full Stack Engineer to help build the next generation of our cloud-native healthcare platform. You will be a key technical contributor, responsible for designing and building end-to-end features, from intuitive user interfaces to the robust backend services that power them. You will focus on creating sophisticated, high-performance web applications that empower radiologists and clinical staff. If you are a builder who thrives on solving complex challenges across the entire technology stack, enjoys mentoring others, and wants to make a significant impact on healthcare, this is the perfect opportunity for you. Key Responsibilities: • Design and Build End-to-End Features: Lead the design, development, and maintenance of scalable, resilient, and secure features across the full stack, using modern Angular and Node.js., • Elevate the User Experience: Collaborate closely with UI/UX designers and Product Managers to translate complex clinical workflows into intuitive and performant solutions, from the API to the UI., • Drive Full Stack Architecture & Quality: Contribute to our overall system architecture, helping to identify performance bottlenecks, improve data flows, and simplify complexity. You will set a high standard for code quality and testing across both frontend and backend., • Champion Performance: Drive application-level performance optimization for our critical workflows, ensuring our systems meet strict speed and reliability requirements for clinical decision-making., • Lead with Technical Expertise and Mentorship: Formally or informally mentor other engineers, helping to level up the team through code reviews, knowledge sharing, and hands-on guidance. You will significantly influence your team's technical direction and decisions.What We're Looking For:, • Experience in Full Stack Development: 5+ years of software engineering experience, with a strong track record of designing and building complex, end-to-end web applications., • Deep Frontend Expertise: 3+ years of recent, hands-on experience building applications with modern versions of Angular (v2+)., • Strong Backend Expertise: Proven experience building and maintaining scalable backend services and APIs using Node.js., • Strong Architectural and Design Skills: You can independently tackle complex technical challenges across the stack, architecting robust solutions and making sound technical trade-offs with minimal guidance., • Hands-On Expertise with Modern Tech Stacks: You have practical knowledge of the principles and technologies behind our platform:, • Expert-level proficiency in TypeScript, HTML5, and CSS3/SCSS., • Deep experience with reactive programming (RxJS) and state management (NGXS/NgRx)., • Proficiency with both relational and NoSQL databases (e.g., PostgreSQL, MongoDB)., • Experience with microservices architectures and cloud platforms (GCP preferred)., • Clarity in Communication: You can clearly articulate complex technical ideas to both technical and non-technical stakeholders., • Leadership Through Influence: You have a demonstrated ability to influence your team's technical direction, driving consensus, and elevating the bar for engineering excellence.Preferred Qualifications:, • Medical Viewer Experience: Your application will stand out if you have experience developing interactive viewers, particularly for medical imaging (e.g., DICOM viewers)., • Healthcare Domain Experience: Familiarity with regulated industries and standards (e.g., HIPAA) is a significant advantage., • Advanced Full Stack Knowledge: Experience with component libraries (Angular Material), advanced browser APIs (WebSockets, Web Workers), and containerized environments (Docker, Kubernetes)., • DevOps Familiarity: A solid understanding of CI/CD principles and experience with tools like GitLab CI.Why You Should Join Us:, • Solve Challenging Problems: This is a high-leverage role. You will be working on impactful technical challenges that are critical to the company's success., • Build the Future of Healthcare: You won't just be maintaining a system; you will be a primary builder of its future state, with the autonomy to own major components., • Make a Major Impact: This is a chance to establish yourself as a key technical voice on a team that is transforming healthcare., • Competitive Compensation & Benefits: We offer a strong salary, meaningful equity, a 100% remote culture, and significant opportunities for growth. We are a values-driven company. Our values: • Clinical service first., • Collaborate with our customers., • Listen, respect, learn., • Be nice., • Be creative., • Be honest., • Be helpful. Compensation and Benefits Typical salary range for this position is $150,000 - $165,000. However, Synthesis participates in location based hiring and salary ranges can be adjusted based on candidate's residence. Other benefits include, but are not limited to: Medical, Dental, Vision, "Use as needed" vacation policy, and participation in our employee option program. Synthesis Health is an Equal Employment/Affirmative Action employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law.

Job Description Lead Electrical Engineer- EV Industry Requisition #: AM Premier Solutions- HR-0009 Location: Remote/ Houston, TX Position Status: Full Time Exempt Status: Exempt Company Profile: At AM Premier Solutions we specialize in providing comprehensive engineering solutions and operational support services tailored to meet company’s specific needs. With expertise spanning in industrial structural engineering, electrical engineering, and project lifecycle management. In addition to our core engineering offerings, we offer purpose-built EV infrastructure solutions, products, and reliability as a Service Consistent Resiliency CS to ensure safe and worry-free electric vehicle charging operations. Our operation support services encompass electrical maintenance and repair, mission-critical facilities management, power resiliency solutions, and comprehensive business operations support. Job Summary: AM Premier Solutions is actively seeking innovative, creative, best-in-class experts to join our growing team. We are seeking an experienced Lead Electrical Engineer to join our team in the EV industry. This role involves overseeing the technical development, design, and implementation of EV charging infrastructure projects, procurement of electrical equipment, managing site construction, and contributing to the software development of an EV charger communication software. The ideal candidate will work closely with utility companies, ensuring power system reliability and reviewing electrical deliverables for code compliance and high-quality standards. A background in project management, EV systems, and power distribution is essential. Responsibilities: • Review electrical deliverables for compliance with national and local codes, safety regulations, and industry standards., • Lead the technical development and design of EV charging installations, ensuring high-quality execution from concept to completion., • Coordinate with utility companies to ensure power system reliability and manage the supply of power to EV charging stations., • Oversee project management activities, including scopes, timelines, budgets, and resource allocation for EV charging infrastructure projects., • Collaborate with cross-functional teams, including architects, engineers, contractors, and clients, to ensure seamless project execution., • Maintain a high standard of quality and reliability in all designs to ensure long-term operational success., • Provide mentorship and technical guidance to project teams., • Assist with the software development of EV charger communication software., • Support business development initiatives by participating in client meetings, technical presentations, and project proposals. Key Skills: • Expertise in EV systems and charging infrastructure design., • Proficiency in software development for EV Charger Communication, particularly with OCPP., • Strong knowledge of power distribution systems and the ability to coordinate with utility companies., • Experience in procurement of electrical equipment, including generators, and ensuring cost-effective and compliant acquisitions., • In-depth understanding of electrical codes and standards (NEC, NFPA, IEEE) and the ability to ensure compliance., • Effective project management skills, including budgeting, scheduling, and resource planning., • Excellent communication and collaboration skills for working with cross-functional teams., • High attention to detail and commitment to quality assurance in electrical design and implementation. Qualifications: A Bachelor's degree in Electrical Engineering or a related field, along with a Professional Engineer (P.E.) license and 10+ years of experience in designing and implementing EV charging systems and infrastructure. Business development experience is a plus, it is not required. Supervisory Responsibilities: Oversee the performance and productivity of project teams and site construction to ensure successful delivery of EV charging infrastructure projects. Work Environment: The work environment fosters a dynamic and professional hybrid setup, seamlessly integrating remote and in person collaboration. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential job functions. While performing the duties of this job, the employee is regularly required to talk or hear. Although the role is primarily sedentary, occasional lifting of materials or equipment weighing up to 10 lbs. may be necessary. Travel: Local, domestic, and international travel will be required. AM Premier Solutions is an Equal Opportunity Employer (EOE). Qualified applicants are considered regardless of race, color, age, sex, sexual orientation, religion, disability, ethnicity, national origin, marital status, veteran status, or any other legally protected status. Disclaimer: This job description provides an overview of primary responsibilities but may not encompass all duties and tasks required of the employee. Additional responsibilities may arise or be assigned, with or without notice, to adapt to evolving business needs.

Job Description Optical Navigation Engineer Locations: Houston, TX; Littleton, CO; Remote About Intuitive Machines Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. We are seeking a talented and experienced Optical Navigation Engineer to play a key role on our Flight Dynamics - Interplanetary team. Responsibilities: • Support high-profile interplanetary missions such as NASA’s OSIRIS-APEX and Lucy, as well as commercial Lunar and Mars programs., • Perform optical navigation ground and flight software development, testing, integration, and flight validation., • Perform optical navigation operational analysis, calibration, planning, and image processing., • Perform shape modeling and digital terrain mapping of planetary surfaces, including asteroids and the Moon., • Produce technical reports and present results to the wider ground navigation team and project stakeholders., • Coordinate analyses with and work alongside our industry and mission partners., • Work closely with spacecraft subsystem engineers, scientists, and other stakeholders to understand mission requirements., • Perform other duties as required. Requirements: • Bachelor’s with minimum of 2-5+ years of experience, or Master’s with 0-2+ years of experience in the field or in a related area., • Degree in Aerospace Engineering, Astrodynamics, Astronomy, Planetary Science, Optics, Physics, or related discipline., • Knowledge of optical navigation with expertise in at least one or more of the following domains: celestial navigation, terrain-relative navigation, observational astronomy, astrodynamics, computer vision (classical and/or AI/ML), or software engineering., • Proficiency in Python and C/C++ program languages., • Experience with Python package management systems such as Conda/mamba and configuration management systems such as git/GitLab., • Experience with Linux operating systems., • Excellent technical, communications, and interpersonal skills., • Demonstrated experience in leading work groups and teams., • Ability to work collaboratively in a multi-disciplinary team environment., • Must be available to travel for team meetings and critical operations support as needed., • Must be willing to cross-train in other deep space navigation disciplines as required to maintain our multi-mission workforce., • Must be a US Citizen. Preferred Requirements: • PhD in Aerospace Engineering, Astrodynamics, Astronomy, Planetary Science, Optics, Physics, or related discipline., • Experience with one or more of the following: astronomical image processing, planetary shape/terrain modeling, optical systems design and testing, statistical estimation, photometric analysis, deep space mission operations, embedded software development, space systems engineering, or space domain awareness., • Experience with on-board spacecraft flight software development., • Proficiency with Optical Navigation toolkits such as NASA’s GIANT API., • Experience with the NAIF SPICE toolkit., • Experience with NASA’s core Flight System (cFS) framework. Competency Levels: The possible competency levels for this position and the salary ranges for Colorado-based employees are: • Level II: $100,000 – $130,000, • Level III: $130,000 – $160,000 US EEO Statement Intuitive Machines is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law.

Job DescriptionRemote SW Engineer (Ruby/React) - $100-$130k Permanently 100% Remote Job Title: Remote SW Engineer (Ruby/React) Salary: $100k-$130k Base + Benefits, 401k, PTO Requirements: Ruby, Rails, React AWS Our Tech Stack: Ruby/Rails, AWS, React, Vue, TypeScript, Ansible, Terraform, CloudFormation, Linux, Postgres We offer an intuitive web-based CRM for financial advisors and wealth managers. Our CRM makes it incredibly easy for everyone from solo financial advisors to enterprise firms to manage their current book of business, contacts, and increase their sales. Our software integrates seamlessly with both leading FinTech brands and general tools like Google and Outlook. It enables them to manage their book of business, streamline their workflow, and grow their practice. We are Series B funded for $30MM, have been in business since 2012, and have 100 employees. We are REMOTE first and our team is distributed throughout the country. Due to growth, we are hiring a Remote SW Engineer experience with: • Ruby, Rails, • React, • JavaScript, Vue, TypeScript, • Ansible, • Terraform, • CloudFormation, • Linux You be partnering with a team of very senior Rails developers who have been using the framework since 2.3. You will make architectural decisions that drive the next generation of our product, build/deploy third party integrations, and create components for our client facing features. If you have this experience, please apply immediately. We are actively interviewing this week and next for this high profile position. Top Reasons to Work with Us • Remote: Permanently 100% Remote, • Compensation: $100k-$130k Base + Benefits, 401k, PTO, • Ownership: Take ownership of our products next gen architecture, • Culture: Modern, supportive start-up cultureWhat You Will Be Doing, • Partner with our other very senior Rails developers who have been using the framework since 2.3, • Make architectural decisions that drive the next generation of our tech stack., • Work closely with technical product teams to create custom user experience-led features, • Navigate from front to back end architecture improvements, • Built out 3rd party integrationsWhat You Need for this Position, • Ruby, Rails, • React, • JavaScript, React, Vue, • Ansible, • Terraform, • CloudFormation, • Linux, • PostgresWhat's In It for You, • $100k-$130k Base + Benefits, 401k, PTO, • Vacation/PTO, • Medical, • Dental, • Vision, • Bonus, • 401k So, if you are a Remote Ruby/Rails Engineer with experience, please apply today! Colorado employees will receive paid sick leave. For additional information about available benefits, please contact Matt Abbasfard • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 10/04/2024 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.