Trabajos welder en Schenectady, New YorkCrear alertas

Job Description Welder/Fabricator Pay: $25-35/hr. Shift: 7am to 3:30pm (Monday-Friday) Requirements: • HS Diploma or GED, • 2+ years of welding work experience, • Knowledge and experience in primarily Spray GMAW (MIG), GTAW (TIG), weld prep and plasma cutting., • Experience operating bridge cranes and forklift trucks preferred., • Must successfully complete a pre-employment weld test., • Spray GMAW (MIG), GTAW (TIG), weld prep and plasma cutting., • Cut, bend, drill, tap, and similar operations as required to fabricate intricate assemblies., • Operate bridge cranes and forklift trucks., • Must be able to read engineering fabrication drawings, layout, and weld structural fabrications., • Must follow written procedures and work instructions., • As an employee, you must maintain an average weld efficiency rating of 70% or better. The rating is based on historical data, • Proper utilization of Personal Protective Equipment (PPE), • Work within the scope of MWI's safety policies and procedures., • Health / Dental / Vision, • 401k with company match, • Paid Time Off, • Life Insurance, • Employee Assistance Program, • Overtime Opportunities

Job Description Pipe Welder Pay: 25-35/hr. + 10% shift differential for 2nd shift Shifts: • 1st: 7am to 3:30pm (Mon-Fri), • HS Diploma or GED, • 2+ years of welding work experience, • Knowledge and experience in primarily Spray GMAW (MIG), GTAW (TIG), weld prep and plasma cutting., • Experience operating bridge cranes and forklift trucks preferred., • Must successfully complete a pre-employment weld test., • Spray GMAW (MIG), GTAW (TIG), weld prep and plasma cutting., • Cut, bend, drill, tap, and similar operations as required to fabricate intricate assemblies., • Operate bridge cranes and forklift trucks., • Must be able to read engineering fabrication drawings, layout, and weld structural fabrications., • Must follow written procedures and work instructions., • As an employee, you must maintain an average weld efficiency rating of 70% or better. The rating is based on historical data, • Proper utilization of Personal Protective Equipment (PPE), • Work within the scope of MWI's safety policies and procedures., • Health / Dental / Vision, • 401k with company match, • Paid Time Off, • Life Insurance, • Employee Assistance Program Great timing, I just got the answers from the hiring managers: • who will be the point of contact for all candidate submissions ? Carolyn Gamberutti & Roberta Cross (copied on this email), • Who will the candidate be interviewing with and how quickly is your company willing to interview ? QA Manager, Sr. QC Inspector (for weld test) – interviews usually same week that we see the resume, • what does the interview process look like ? Is it an in person then a weld test a different day or is it all done in 1 day? In person interview, typically interview and test on same day. Sometimes candidates come back for the weld test., • What is the welding tests that they will perform? GTAW IN 6G, FCAW IN 3G, AND GMAW IN 3G, • How will the metal be tested? Visual , ultrasound , x ray ? liquid penetrant ? Bend testing ? VISUAL AND BEND EXAMS, • is an ASME certification required before coming in? Or is this preferred? Not required? Previous ASME IX qualifications is preferred, • how important is navsea familiarization for candidates? NOT REQUIRED, • is there a drug test and background check ? If so, what type of drug test and how long back is the background ? We check references currently only., • what type of metal will they be working with? Carbon and stainless steels, • what welding processes are most important I saw gtaw and gmaw on the posting. Will you take a proficient tig welder who isn't good with mig and vice versa? Or do they have to be proficient in both? Prefer proficient in both not required, • are you open to just a welder or just a fabricator or do all 6 positions have to be able to both weld and fabricate? Both, • can you please send us the employee benefit details along with how much PTO they receive and when they can start benefits? Yes, see attached. Let us know if questions.

At BrandSafway, we know our employees are our greatest asset, which is why we give them the tools, training, and resources to be successful. Come join our growing team! Monday-Friday 6am-2:30pm (OT based on business need) Job Summary Welder I is an entry-level skilled position responsible for performing basic welding and fabrication tasks under close supervision. The role involves reading simple blueprints, operating welding equipment, and ensuring work meets safety and quality standards. Key Responsibilities \n • Perform basic welding operations using MIG processes.\n, • Read and interpret simple blueprints, drawings, and work orders.\n, • Prepare materials by cutting, grinding, and cleaning metal surfaces.\n, • Set up welding machines and select appropriate tools and materials.\n, • Inspect completed welds to ensure quality and adherence to specifications.\n, • Maintain welding equipment and report maintenance needs.\n, • Follow company safety standards and wear required PPE.\n, • Assist senior welders with complex fabrication tasks.\n, • High school diploma or GED required.\n, • Technical training or welding certification preferred.\n, • 1-3 years of welding experience.\n, • Basic knowledge of welding techniques and metal properties.\n, • Ability to use measuring tools such as tape measures, calipers, and gauges.\n, • Ability to read basic blueprints and technical documents.\n, • Strong attention to detail.\n, • Ability to lift up to 50 lbs and stand for extended periods.\n\n Skills & Competencies \n • Basic knowledge of welding safety procedures.\n, • Mechanical aptitude.\n, • Ability to work in a team environment.\n, • Good hand-eye coordination.\n, • Willingness to learn and accept supervision.\n\n Working Conditions \n • Exposure to heat, sparks, fumes, and loud noise.\n, • Work indoors.\n, • Overtime may be required based on production demands.\n\n #LI-CI1 BrandSafway offers a competitive benefits package that includes medical, dental, vision, life and disability insurance along with a generous 401k plan. About Us: BrandSafway is a leading global provider of access, specialized services, and forming and shoring solutions to the industrial, commercial and infrastructure markets. Through a network of ~340 strategic locations across 25 countries and ~40,000 employees, BrandSafway delivers a full range of industrial service solutions. BrandSafway supports maintenance and refurbishment projects as well as new construction and expansion plans with unmatched service from expert local labor and management. Today's BrandSafway is At Work For You® - leveraging innovation and economies of scale to increase safety and productivity, while remaining nimble and responsive. BrandSafway, including its subsidiaries, is an equal opportunity employer and does not discriminate on the basis of race, creed, color, national origin, religion, gender, marital status, sexual orientation, age, disability, special disabled or veteran status. Notice to all potential job candidates: Please be advised that BrandSafway will never require or ask for any fee from you in exchange for being considered, hired, promoted, transferred or having ongoing employment with us. It is a violation of our Code of Conduct if any employee requests any money or fee from you in exchange for tentatively special treatment or consideration. If anyone, regardless of whether an existing employee, or anyone else, requests payment of any fee in exchange for being hired into our company, you may confidentially contact our HR Compliance department at [email protected] and provide the name of the individual and any other documentation or proof of such an act.

At BrandSafway, we know our employees are our greatest asset, which is why we give them the tools, training, and resources to be successful. Come join our growing team! Monday-Friday 6am-2:30pm (OT based on business need) Job Summary Welder I is an entry-level skilled position responsible for performing basic welding and fabrication tasks under close supervision. The role involves reading simple blueprints, operating welding equipment, and ensuring work meets safety and quality standards. Key Responsibilities \n • Perform basic welding operations using MIG processes.\n, • Read and interpret simple blueprints, drawings, and work orders.\n, • Prepare materials by cutting, grinding, and cleaning metal surfaces.\n, • Set up welding machines and select appropriate tools and materials.\n, • Inspect completed welds to ensure quality and adherence to specifications.\n, • Maintain welding equipment and report maintenance needs.\n, • Follow company safety standards and wear required PPE.\n, • Assist senior welders with complex fabrication tasks.\n, • High school diploma or GED required.\n, • Technical training or welding certification preferred.\n, • 1-3 years of welding experience.\n, • Basic knowledge of welding techniques and metal properties.\n, • Ability to use measuring tools such as tape measures, calipers, and gauges.\n, • Ability to read basic blueprints and technical documents.\n, • Strong attention to detail.\n, • Ability to lift up to 50 lbs and stand for extended periods.\n\n Skills & Competencies \n • Basic knowledge of welding safety procedures.\n, • Mechanical aptitude.\n, • Ability to work in a team environment.\n, • Good hand-eye coordination.\n, • Willingness to learn and accept supervision.\n\n Working Conditions \n • Exposure to heat, sparks, fumes, and loud noise.\n, • Work indoors.\n, • Overtime may be required based on production demands.\n\n #LI-CI1 BrandSafway offers a competitive benefits package that includes medical, dental, vision, life and disability insurance along with a generous 401k plan. About Us: BrandSafway is a leading global provider of access, specialized services, and forming and shoring solutions to the industrial, commercial and infrastructure markets. Through a network of ~340 strategic locations across 25 countries and ~40,000 employees, BrandSafway delivers a full range of industrial service solutions. BrandSafway supports maintenance and refurbishment projects as well as new construction and expansion plans with unmatched service from expert local labor and management. Today's BrandSafway is At Work For You® - leveraging innovation and economies of scale to increase safety and productivity, while remaining nimble and responsive. BrandSafway, including its subsidiaries, is an equal opportunity employer and does not discriminate on the basis of race, creed, color, national origin, religion, gender, marital status, sexual orientation, age, disability, special disabled or veteran status. Notice to all potential job candidates: Please be advised that BrandSafway will never require or ask for any fee from you in exchange for being considered, hired, promoted, transferred or having ongoing employment with us. It is a violation of our Code of Conduct if any employee requests any money or fee from you in exchange for tentatively special treatment or consideration. If anyone, regardless of whether an existing employee, or anyone else, requests payment of any fee in exchange for being hired into our company, you may confidentially contact our HR Compliance department at [email protected] and provide the name of the individual and any other documentation or proof of such an act.

At BrandSafway, we know our employees are our greatest asset, which is why we give them the tools, training, and resources to be successful. Come join our growing team! Monday-Friday 6am-2:30pm (OT based on business need) Job Summary Welder I is an entry-level skilled position responsible for performing basic welding and fabrication tasks under close supervision. The role involves reading simple blueprints, operating welding equipment, and ensuring work meets safety and quality standards. Key Responsibilities \n • Perform basic welding operations using MIG processes.\n, • Read and interpret simple blueprints, drawings, and work orders.\n, • Prepare materials by cutting, grinding, and cleaning metal surfaces.\n, • Set up welding machines and select appropriate tools and materials.\n, • Inspect completed welds to ensure quality and adherence to specifications.\n, • Maintain welding equipment and report maintenance needs.\n, • Follow company safety standards and wear required PPE.\n, • Assist senior welders with complex fabrication tasks.\n, • High school diploma or GED required.\n, • Technical training or welding certification preferred.\n, • 1-3 years of welding experience.\n, • Basic knowledge of welding techniques and metal properties.\n, • Ability to use measuring tools such as tape measures, calipers, and gauges.\n, • Ability to read basic blueprints and technical documents.\n, • Strong attention to detail.\n, • Ability to lift up to 50 lbs and stand for extended periods.\n\n Skills & Competencies \n • Basic knowledge of welding safety procedures.\n, • Mechanical aptitude.\n, • Ability to work in a team environment.\n, • Good hand-eye coordination.\n, • Willingness to learn and accept supervision.\n\n Working Conditions \n • Exposure to heat, sparks, fumes, and loud noise.\n, • Work indoors.\n, • Overtime may be required based on production demands.\n\n #LI-CI1 BrandSafway offers a competitive benefits package that includes medical, dental, vision, life and disability insurance along with a generous 401k plan. About Us: BrandSafway is a leading global provider of access, specialized services, and forming and shoring solutions to the industrial, commercial and infrastructure markets. Through a network of ~340 strategic locations across 25 countries and ~40,000 employees, BrandSafway delivers a full range of industrial service solutions. BrandSafway supports maintenance and refurbishment projects as well as new construction and expansion plans with unmatched service from expert local labor and management. Today's BrandSafway is At Work For You® - leveraging innovation and economies of scale to increase safety and productivity, while remaining nimble and responsive. BrandSafway, including its subsidiaries, is an equal opportunity employer and does not discriminate on the basis of race, creed, color, national origin, religion, gender, marital status, sexual orientation, age, disability, special disabled or veteran status. Notice to all potential job candidates: Please be advised that BrandSafway will never require or ask for any fee from you in exchange for being considered, hired, promoted, transferred or having ongoing employment with us. It is a violation of our Code of Conduct if any employee requests any money or fee from you in exchange for tentatively special treatment or consideration. If anyone, regardless of whether an existing employee, or anyone else, requests payment of any fee in exchange for being hired into our company, you may confidentially contact our HR Compliance department at [email protected] and provide the name of the individual and any other documentation or proof of such an act.

Job DescriptionSalary: $45-$50 per hour Location: Schenectady, NY Employment Type: Full-Time Why Join AEIS? At AEIS, we do more than inspect we build confidence in the world around us. Our work supports infrastructure, innovation, and the future of our communities. We value craftsmanship, teamwork, and continuous improvement, and we invest in the people who share those values. Here, your career is a path not a position. AEIS professionals grow into QA Leads, Technical Specialists, and Project Leaders who shape the future of construction quality. Learn more: Training & Growth That Matters AEIS operates a full in-house NDT & Technical Training Program covering MT, UT, Hardness testing, and more. Whether youre building new skills or enhancing your expertise, youll find hands-on support, mentorship, and real career mobility. Position Overview Certified Welding Inspector Were seeking AWS Certified Welding Inspectors (CWIs) to support our growing pipeline of infrastructure and structural projects. In this role, you'll perform inspections in a fabrication shop in Schenectady, NY and contribute to the ongoing development of welding quality assurance processes at AEIS. What Youll Do Quality Assurance & Inspection • Perform visual and destructive weld inspections to ensure compliance with AWS D1.1/D1.5, ASME, and DOT standards., • Monitor welding operations and ensure procedures and personnel are qualified., • Identify and document weld defects and non-conformities., • Maintain accurate inspection records and generate professional reports using our proprietary software, designed to report welding and NDT inspections., • Verify and review WPSs, PQRs, and Welder Certifications., • Work closely with project managers, welding engineers, and NDT staff., • Participate in process optimization reviews and corrective action reports. What We're Looking For Must Haves • AWS CWI Certification (Active), • 110 years of hands-on structural welding inspection experience, • Strong communication skills in English (spoken & written), • Basic math and technical documentation skills, • Ability to interpret engineering drawings and construction plans, • Willingness to travel to fabrication shop in Schenectady Bonus Points • MT and UT certifications (Level I/II), • Experience with bolting inspections, • Familiarity with ASME standards, • Experience working on DOT or public infrastructure projects Why This Role Stands Out • Join a welding ecosystem where you can train others, grow your skills, and participate in failure investigations, • Direct collaboration with AEIS Metallurgy & NDT Labs, • Access to internal certification programs, • Work alongside PEs, senior inspectors, and technical experts, • Competitive pay aligned with certifications & experience, • Clear growth pathway to QA Lead and Technical Specialist, • Supportive, inclusive, and professional team culture Salary Range: $45hr - $50/hr. This range is based on national market data and may vary widely by experience and location. Benefits • 401(k) with company contribution, • Health, Dental & Vision Insurance, • Paid Time Off (PTO), • Family Leave, • Professional development & certification support, • Employee referral bonuses, • Parking and transit benefits, • Tuition reimbursement, • Company sponsored discounts (Verizon), • Cross-training & internal mentorship opportunities Equal Opportunity Employer AEIS is an equal opportunity employer and does not discriminate with respect to any term, condition or privilege of employment based on race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, military or veteran status, marital status, or status of an individual in any group or class protected by applicable federal, state, or local law. Employment Authorization Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Job DescriptionDescription: Join the awesome manufacturing group at Unilux Advanced Manufacturing! Here at Unilux we manufacture the highest quality, best performing commercial and industrial boilers in the world! All of our equipment and machinery is state of the art, CNC less than 7 years old! We are searching for the right person to join our team. pristine shop / excellent working conditions. PRIMARY RESPONSIBILITIES CNC Operator Machinist Job Duties: • operate CNC machinery in plant including state of the art plasma table, steel rolls, new Haas lathe, CNC welder, tube / pipe benders, • Programs benders, plasma tables and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs., • Sets-up machines by installing and adjusting jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices;., • Loads feed mechanism by lifting stock into position., • Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to international standards., • Maintains safe operations by adhering to safety procedures and regulations., • Maintains equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions; calling for repairs. Conceptual Skills, Process Improvement, Verbal Communication, Functional and Technical Skills, Controls and Instrumentation, Supply Management, Tooling, Coordination, Inventory Control, Attention to Detail. MUST BE CONFIDENT WITH MODERN SOFTWARE! • Communicate with engineering department to ensure proper files (DXF) are correct for manufacture, • Program all CNC machinery to provided specifications, • Operate CNC equipment to manufacture precision components Salary: $22.00 - $34.00 per hour Benefits: • 401(k), • 401(k) matching contribution, • Dental insurance, • Health insurance, • Life insurance, • Vision insurance, • Paid time off Reasonable COVOD Protocols are in place. Min. CNC Guidelines. Education:

Welder I is an entry-level skilled position responsible for performing basic welding and fabrication tasks under close supervision. Assist senior welders with complex fabrication tasks.

Welder Job Duties: Interpret blueprints, drawings, and measurements to plan layouts.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Welder I is an entry-level skilled position responsible for performing basic welding and fabrication tasks under close supervision. Assist senior welders with complex fabrication tasks.

Aerotek - - Responsibilities: Perform high-quality welding, fabrication, and repair work using MIG and TIG techniques on stainless steel and carbon steel.Assemble, weld, and fit components according to engineering drawings, blueprints, and technical specifications.Operate a variety of fabricating e

Aerotek - - Responsibilities: Perform high-quality TIG welding with purge techniques on stainless steel, carbon steel, hydraulic lines, and other materials.Weld Schedule 40 pipe and perform precise fit-ups.Produce full-penetration welds suitable for sanitary and regulated production environments.Re

Aerotek - - Responsibilities: Performing high-quality welds, repairs, and assemblies using multiple welding techniques; Operating fabrication equipment (brakes, rolls, shears, drill presses, flame cutters); Measuring and verifying workpiece specifications with precision tools; Reading and interpret

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Cimolai-HY is seeking experienced Submerged Arc Welders. The welder's primary responsibility is to ensure the structural integrity and quality of welded metal components and that their welds meet or exceed industry standards. A Submerged Arc Welder performs welding tasks using the submerged arc weld

Polar Beverages - 9201934635598_1 [Warehouse Associate / Forklift Operator] As a Forklift Operator at Polar Beverages, you'll: Move product by loading and unloading trailers; Strip down bottle trailers for production; Strip down Polar trailers so they can be loaded; Deliver bottles to production lin

Frito Lay - - Responsibilities: Safely operate a forklift after training and certification; Load and unload pallets of product to and from trailers; Safely place and store product in multi-tiered warehouse storage; Pick appropriate cases according to order using required technology; Properly manage

Polar Beverages - 9201934634494_1 [Warehouse Associate / Forklift Operator] As a Forklift Operator at Polar Beverages, you'll: Move product by loading and unloading trailers; Strip down bottle trailers for production; Strip down Polar trailers so they can be loaded; Deliver bottles to production lin

Schwan's Company - - Responsibilities: Complete preventive maintenance on machinery and equipment; Troubleshoot mechanical malfunctions; Assist with repairs, construction, and installation of plant equipment; Locate problems using testing instruments and mechanical schematics; Perform advanced main

Aerotek - - Responsibilities: Loading, unloading, and moving materials throughout the plant, yard, and designated work areas; Operating forklifts and material-handling equipment safely and efficiently; Using the MRP and Warehouse Management System (WMS) to track inventory and update records; Readin

Aerotek - - Responsibilities: Perform painting, drywall repair, and patching in customer units.Conduct light carpentry tasks to prepare units for new tenants.Replace lightbulbs, locks, and other appliances as necessary.Patch holes in walls and apply paint to maintain unit aesthetics.Execute janitor

PeopleReady - PR-1486775 [General Laborer] As a General Laborer at PeopleReady, you'll: Assist with event set up, breakdown, and general maintenance to ensure venues are clean and welcoming; Support manufacturing processes by assembling products, operating machinery, and performing quality checks; L

Installer] - PT or FT / Easy Payments With Competitive Pay Rates / Flexible Scheduling / Access to Handy's Large Customer Base - As a Handy Pro Furniture Assembler you'll: Be responsible for for assembling a variety of furniture pieces in our customers' homes; Assemble a wide range of furniture item

Warehouse Job in Clifton Park, New York.Schedule: Start time: 12:00 am End time: 8:30 am Tuesday and Saturday OFF Holidays required.Safely operate a forklift after training and certification.Load and unload pallets of product to and from trailers.Safely place and store product in multi-tiered wareho

Forklift Operator - Part-Time - Night Shift.Location: Tonawanda, NY, US, 14150.What You'll Need To Succeed As A Forklift Operator At XPO.Watch this short video to see a day-in-the-life on an XPO dock.Able to do basic math calculations, with and without a calculator.Available to work a variety of shi

Location: USA - Malta, 6 Stone Break Road.Division: Solutions Job Posting Title: Material Handler (Days) Time Type: Full Time.The General Warehouse Associate is responsible for picking, scanning, labeling, moving, staging, replenishing, and stacking product.This individual is also responsible for co

Material Handler/Manufacturing.A Material Handler/Manufacturing handles, moves, and stores various non-hazardous and hazardous materials within a warehouse.Their main duties include the physical and electronic movement of inventory as it relates to the manufacturing process.Prepare all parts needed

Dependable Forklift / Reach Truck Operator Needed.Our client, a beverage distribution company located in Altamont, is currently seeking a dependable and safety-focused Forklift / Reach Truck Operator to join our warehouse team.The Forklift / Reach Truck Operator is responsible for safely operating p