Installation engineer jobs in United Kingdom - Page 20

My client, a bespoke MEP and Sustainability Consultancy based in Central London is searching for a Mechanical Design Engineer to join their friendly team. This is a hybrid role, offering varied sustainable builds and high-end residential, commercial and industrial renovations across the South-East. This opportunity is available with a bespoke Consultancy who value family and a work-life balance. As Mechanical Engineer you will be expected to complete detailed mechanical designs including heating, ventilation, plumbing and air-conditioning using AutoCAD and Revit. You will also be expected to; -Complete 2D and 3D models, perform heat load calculations, duct sizing, pipe sizing, and equipment selection using relevant software (e.g., Revit, AutoCAD, HAP, or Elite). • Prepare and review mechanical drawings, schematics, simulations and technical specifications in accordance with building codes, sustainability goals, and project requirements. -Design to BIM level 2 in accordance with British Standards PAS 1192-5 -Collaborate with electrical, plumbing, and structural engineers to ensure coordinated MEP layouts and avoid design clashes. • Attend internal and client meetings to resolve design issues/queries and align project objectives. -Review designs submitted by the team and respond to RFIs (Requests for Information). -Site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction. -Evaluate new materials and designs ensuring energy efficiency and cost-effectiveness. This role offers a hybrid, flexible working environment, a friendly and supportive team, travel expenses for business and career progression. As a Mechanical Engineer, you will be expected to have a BSc and/or an MSc Mechanical Engineering or Building Services Engineering and have experience working for UK based Consultancy completing detailed HVAC designs for residential and commercial developments using AutoCAD and Revit You are also required to have a detailed knowledge PAS 1192-5 and other relevant codes and have a keen understanding of BREEAM and net zero. Candidates are required to have a valid UK driving licence to visit sites. Part time options are also available. If this role is of interest to you, please contact Jordanna Morris at Aztrum Recruitment

Job Title: Fire Alarm Engineer Industry: Fire Protection Services Salary: £42,000 per annum + Call out Rota Stanby Rate & Door to Door bonus Location: South-East London About the Company Our client is an established, family-led electrical services provider with a strong reputation for quality, reliability, and technical excellence. Operating across London and the Southeast for over 20 years, they deliver high-standard electrical and fire safety services to a wide range of clients. With a well-equipped head office, warehouse facilities, and a dedicated training centre in Hertfordshire, the business is committed to investing in its people, maintaining exceptional standards, and supporting long-term career development. Due to continued growth, they are now seeking experienced professionals to join their expanding team. The Role Our client is seeking a qualified and experienced Fire Engineer to carry out the installation, servicing, maintenance, and upgrading of Fire Alarm and AOV systems. This role involves working across a mix of domestic and commercial properties, predominantly within the social housing and local authority sectors. Key Responsibilities Interpret fire alarm and AOV drawings and specifications Install, service, maintain, repair, and adapt fire alarm and AOV systems Complete full system installations and upgrades Conduct scheduled servicing, inspections, and fault finding Work confidently with a wide range of fire alarm control panels and equipment, including closed protocol systems Ensure compliance with BS 7671 and BS 5839 regulations Accurately complete job reports and certification via a digital job management system Adhere to current Health & Safety legislation and fire safety standards Attend and complete all company-provided training Participate in performance reviews and development programmes Liaise effectively with office teams and supervisors to resolve queries Work to agreed KPIs and operational standards Undertake any other reasonable duties as required What's on Offer Company vehicle and fuel card (private mileage allowance included) Private healthcare contribution 1 in 6 calll out rota Increasing annual leave entitlement with length of service All testing equipment and PPE provided Access to fully stocked warehouse facilities Ongoing training and professional development Clear progression opportunities Supportive, team-oriented working environment Flexible and forward-thinking workplace culture Regular team events LON123

Job Title: Electrical Shift Engineer Location: City of London Salary: £52,000 – £55,000 per annum Job Type: Full-Time, Permanent Working Hours: Continental Shift Pattern (Days & Nights, 7:00am – 7:00pm / 7:00pm – 7:00am) Overtime: Available About the Role: We are currently seeking an experienced Electrical Shift Engineer to join a high-profile site in the City of London. This is an excellent opportunity to work within a critical and fast-paced environment, offering strong career progression, structured training, and a competitive salary package. You will be part of a shift team responsible for maintaining the integrity and performance of all electrical and building services systems on site. Key Duties & Responsibilities: • Carry out Planned Preventative Maintenance (PPM) and reactive maintenance, • Electrical fault finding, diagnostics, and repairs, • Maintenance and servicing of AHUs (Air Handling Units) and FCUs (Fan Coil Units), • Testing and maintenance of emergency lighting systems, • Fire alarm testing and basic system checks, • Sprinkler system inspections and testing, • Maintenance of lighting systems including Simtronic lighting, • Ensure all works are completed in accordance with health & safety regulations, • Monitor plant performance and respond to system alarms, • Complete accurate shift reports and maintenance records Requirements: • NVQ Level 3 / City & Guilds in Electrical Installation or equivalent, • 18th Edition Wiring Regulations (essential), • Previous experience in a critical or commercial building environment, • Strong fault-finding and problem-solving skills, • Experience working within a shift environment (desirable), • Good communication skills and ability to work as part of a team What We Offer: • Competitive salary of £52,000 – £55,000, • Continental shift pattern (work-life balance with structured rotation), • Overtime opportunities, • Company pension scheme, • 20 days annual leave, • Private medical healthcare, • Ongoing training and career progression, • Additional company benefits How to Apply: If you are a reliable and skilled Electrical Shift Engineer looking for your next challenge in the City of London, apply now to be considered for this opportunity

Job Title: Commercial Gas Engineer Location: Mobile (around the M25 and into London) Company Van Provided The Role We are seeking an experienced Commercial Gas Engineer to join our growing team. This is a mobile role involving servicing, maintenance, repairs, and installations across commercial properties. You will be responsible for delivering high-quality workmanship while ensuring compliance with commercial gas safety standards and maintaining professional client relationships on-site. Working Hours & Benefits • Working hours typically between 8:00am – 5:00pm (dependent on workload and time of year), • Overtime opportunities available, • Monday to Friday, • Call-out rota of 1 in 4 (£100 standby) Key Responsibilities • Servicing and maintaining commercial gas appliances and heating systems, • Carrying out reactive and planned maintenance within commercial environments, • Installation of commercial boilers and plant room equipment, • Fault finding, diagnostics, and system repairs, • Ensuring all work complies with current Gas Safety and commercial regulations, • Completing commissioning and testing of systems, • Providing excellent service to clients and site contacts, • Completing all relevant documentation electronically Requirements (Essential Qualifications & Experience) • Valid Gas Safe Registration, • ACS Commercial Gas Qualifications (e.g. CODNCO1, CIGA1, ICPN1, TPCP1/1A), • Proven experience working on commercial gas systems and plant, • Full UK Driving Licence, • Strong diagnostic and problem-solving skills, • Ability to work independently in a mobile role, • Experience working within commercial environments (e.g. offices, schools, retail, industrial) What’s On Offer • Company van provided, • Competitive salary, • Fuel card, • Company pension, • Overtime opportunities, • Uniform and tools provided, • Ongoing training and development

Job Title: Technical Systems Engineer Contract Type: Permanent Salary: Dependent on experience Benefits: Private Medical, Pension, 25 days annual leave, Gym Membership, Cycle to Work Scheme, Employee Assistance Programme Office Location/Working Policy: Remote Working Hours: 8:45 to 17:30 The Role: This role sits within Acora’s Tech Centre, reporting to the Technical Delivery Lead, and focuses on providing professional services through the delivery of technical implementation, specialist expertise, and engineering support for contracted services and project customers. The position is centred on the delivery of Acora’s implementation services, working to solutions defined by the Architecture team and ensuring a high standard of execution throughout the project lifecycle. Responsibilities include attending project kick-off meetings, supporting Joint Verification with customers, producing customer-facing documentation such as high-level designs, low-level designs, and scopes of work, and implementing technical solutions in line with approved designs. The role requires close collaboration with the project management team to ensure quality and timely delivery, while operating under ITIL standards including change control and problem management. In addition, the position provides support to colleagues within the Tech Centre and acts as an escalation point for wider service operations teams. Beyond core implementation work, the role may also involve delivering professional services remotely or on-site, which can include training customer IT teams and offering interim or backfill support. Role Responsibilities: • Produce high quality, customer-facing solution documents in line with Acora deployment, monitoring and QA standards which will be owned throughout project delivery • Create JV templates for the core technology area and utilise them to deliver consistent output • Demonstrate a high level of commercial awareness, focusing on proactivity and efficiency, and constructively challenging decisions that cost money • Lead by example, ‘living and breathing’ the technologies in the core area and using that enthusiasm to drive changes in either process or product. • Deploy all technologies in accordance with approved designs and with the company’s technical standards documentation, agreed best practice standards (including external accreditations) and our project management framework. This is particularly critical in the disciplines of Change Management and Service Introduction. Certain deployments are expected to require evening or weekend work. • Provide support to Sales in your technical stack throughout the Pre-Sales process and be credible as an expert in your field, working in partnership with customers to advise and deliver technology solutions that best meet their business objectives and/or overcome problems. • Work in partnership with customers to advise and deliver services-led technology solutions that best meet their business objectives and/or overcome problems. • Proactively recommend improvements to customer systems and Acora processes that would benefit both the customer and Acora. • Create high quality deployment, monitoring and QA standards/installation guides, work instructions, key customer documentation and maintain CMDB/asset information. • Maintain your skill levels in the core technology set to a satisfactory minimum standard through a combination of self-study, company provided training and external courses. • Proactively manage your diary of upcoming work to drive efficiency and minimise non-chargeable time. Key Skills: Microsoft Azure (IaaS/PaaS), including: • Azure AD identity services and permissions/role management • Core Azure IaaS resource deployment and configuration (VM, VNet, Storage Accounts etc) • Azure Backup and Azure Site Recovery Microsoft 365 platform, including: • Exchange Online migrations (on-premise to cloud, hybrid and tenant-to-tenant) • Enterprise Mobility Suite (Azure AD, MFA, Intune, AIP, ATP, Conditional Access) • OneDrive for Business, SharePoint Online and Microsoft Teams • Microsoft Defender (O365, Cloud, Endpoint, Identity) Microsoft Entra ID, including: • Identity & authentication management • Enterprise apps & registrations • PIM & RBAC Microsoft Server 2012 and 2016, including: • Active Directory deployments and migrations (on-premise and hybrid) • Common Roles (RDS, DFS, DHCP etc) • Implementing and managing complex GPOs, enterprise-level Forests and Trusts Microsoft Exchange Server 2013 to 2019 & SE , including; • Hybrid configuration and management • Migration to O365 • Database high availability (DAG) deployment and management Microsoft Windows 10/11, including: • Mass rollout • Device imaging and driver injection • Device automation/deployment (Autopilot, Intune, SCCM, MDT, WDS) The Interview Process: ☎️ Screening call: Phone call with our recruitment team to assess your suitability for the role, but also if the role is right for you. First interview: A video call over MS Teams with the Hiring Manager Second interview: Usually F2F interview onsite at one of our offices About Acora We’ve been on a mission to improve end user satisfaction since the day we were founded over 25 years ago. As champions of premium experience-led IT services, it is who we are. We constantly challenge old assumptions and inherited wisdom, and demonstrate there are other, better ways to do things. Our mission is to unleash the potential of people through amazing IT experiences. At Acora, we live by three key and simple values that drive everything we do guiding our actions, shaping our culture, and ensuring we deliver excellence every step of the way. #1 BE THE BEST YOU CAN BE We challenge ourselves to raise our game each day. By embracing a mindset of growth, we continuously strive to improve ourselves, our ways of working, and the service we deliver to our customers. #2 WE DO WHAT WE SAY When we make a promise, we follow-through - no excuses. We don’t leave anyone hanging or walk away from challenges. Reliable and focused, we value clear communication to build trust and give customers, and colleagues, the confidence they can count on us every time. #3 TOGETHER WE WIN Business is the biggest team sport of them all. By communicating well, breaking down silos and staying aligned, we create clarity and focus. Strong relationships, shared goals and commitment make us a winning team – for each other and for our customers. To be considered for this position, you must have full rights to work in the UK. Equal Opportunities at Acora Acora is an equal opportunity employer, committed to providing equal opportunities regardless of race or ethnic origin, gender identity, family situation, sexual orientation, disability, religion or age. We hire our people on the basis of qualifications, merit, skills, and business need. We are a Level 1 Disability Confident Committed Employer and will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, perform essential job functions, and receive equitable benefits and all privileges of employment. Please contact us to request any reasonable adjustments. Join us at Acora in creating a workplace where everyone can succeed and make an impact. We look forward to welcoming you to our team

Field Service Engineer – Gates, Barriers & Security Systems Location: Based near Romford (candidates from area's such as Basildon, Romford, Harlow, Chelsmford, Billericay, Enfield will be considered) Salary: Up to £40,000 basic + uncapped overtime + on-call allowance (OTE £50,000+) Hours: Monday–Friday, 40 hours per week (door to door pay) Package: Overtime, on-call rota, training, and career progression We’re working with a leading engineering firm that designs, installs, and maintains high-security gates, barriers, and access control systems across the UK. They are looking for a skilled Field Service Engineer to join their growing team, supporting both installation and maintenance work. This position is ideal for someone with strong electrical and mechanical skills, who enjoys hands-on field work and isn’t afraid to work outdoors in all weathers. You’ll be joining a company that offers long-term progression, extensive training, and the opportunity to earn significantly through overtime and call-out work. Package and Benefits: • Basic salary up to £40,000, • Overtime paid at 1.3x after 40 hours on weekdays, • Uncapped overtime and weekend work available, • On-call rota (1-in-4) with generous allowances, • 22 days holiday + bank holidays (rising to 25 after 2 years), • Company van (business use only), tools, PPE, mobile phone, and uniform provided, • Ongoing training and career development opportunities Field Service Engineer Responsibilities: • Install, service, and repair physical security systems including gates, barriers, blockers, and turnstiles, • Attend breakdowns and carry out fault-finding and diagnostics, • Take part in a 1-in-4 on-call rota (average 2–3 callouts per week), • Complete electronic job sheets using a tablet or smartphone, • Deliver excellent customer service and communicate effectively with clients, • Travel across the South and occasionally further afield, including overnight stays when required Field Service Engineer Requirements: • Based near Romford (candidates from area's such as Basildon, Romford, Harlow, Chelsmford, Billericay, Enfield will be considered), • Strong mechanical and electrical background (18th Edition or equivalent an advantage), • Experience with PLC and/or Control Panels is highly desirable, • Experience working with 3-phase or 24v DC/AC systems preferred, • Full UK driving licence (preferably clean), • Comfortable working outdoors and in all weather conditions, • Physically fit and happy with manual, hands-on work, • Willing to work weekends and take part in the on-call rota, • Must hold a British passport and have no criminal convictions (due to security clearance requirements), • Able to pass a safety-critical medical and face fit test (clean-shaven required for P3 mask) Want more info? Apply today! INDZ

Electrical Installation Technician (LV / Control Panels) £45,000 - £50,000 + Training + Progression to Approved + Overtime + Bonus + Enhanced Holidays + Company Benefits * Herefordshire (Site-Based / Nationwide Travel) Are you a qualified Electrician looking to take the next step in your career, with full support to become an Approved Electrician and gain your Inspection & Testing certification? You will be working on the installation of LV and ELV electrical systems across a range of industrial sites, including water and wastewater projects. This is a hands-on role involving cable installation, containment, and working from technical drawings, with regular travel and overnight stays required. The company is a highly respected electrical engineering specialist with a strong reputation in the industry and a growing pipeline of projects. They are committed to developing their engineers, offering full training towards Approved Electrician status and long-term career progression. This role would suit a qualified Electrician who is eager to develop their skills, gain further qualifications, and progress into a more senior, recognised position within the industry. The Role: Install LV and ELV electrical systems on industrial sites * Work from electrical drawings, schematics, and wiring diagrams * Carry out cable containment and armoured cable installations * Travel nationwide with regular overnight stays * Receive training towards Inspection & Testing (2391) * Maintain high standards of health & safety on site The Person: Qualified Electrician (Level 3 or equivalent) * Experience in industrial or site-based environments * Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH24544a Keywords: Electrician, Industrial Electrician, Trainee Approved Electrician, Electrical Installation, LV, ELV, Water Industry, Wastewater, Utilities, Electrical Engineer, Site Electrician, Cable Installation, Containment, Inspection and Testing Training We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Mobile Electrical Engineer - Mixed Portfolio - FM Service Provider - London & Home Counties - Up to £48,000 An exciting opportunity to join an established building services company based across London has arisen! CBW Staffing Solutions is currently recruiting for a Mobile Electrical Maintenance Engineer to be based on a mixed portfolio of high-end residential and commercial sites located across London and the Home Counties. He or she will be required to carry out PPMs and reactive building maintenance to both electrical and mechanical systems on site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical, Mechanical & general building maintenance. In return, the company is offering a competitive salary of up to £48,000, overtime, further training, and a potential route into further career progression. Hours of work Monday to Friday 8:00 am to 17:00 pm Callout - £150 Standby AllowanceKey Duties & Responsibilities Lighting (Small installation, Fault-finding, Lamping, etc) Emergency lighting tests Control Panels Changing Ballast BMS System - Monitor (i.e. Hot & cold) Maintain and update Log books Plumbing - Unblocking toilets Pumps, motorsPackage Up to £48,000 20 days holiday + Bank holidays - Increasing to 22 after 3 years Private use available Further training Company pensionRequirements Electrically qualified - City & Guilds Level 2&3 (Required) 18th Edition (Required) Must be able to provide copies of your trade certificates A proven track record in commercial building maintenance Multi-skilled Good communication skills Client FacingIf you are interested in this opportunity, please send your CV to Archie Reed of CBW Staffing Solutions for more information

Service Engineer / Field Service Technician / Compressor Engineer required to join a global, market leading engineering manufacturer. The Successful Service Engineer / Field Service Technician / Compressor Engineer will provide mechanical repair, service, and maintenance plus electrical fault finding on high speed rotating equipment, predominantly centrifugal compressors at customer sites UK wide. The Service Engineer / Field Service Technician / Compressor Engineer will ideally have a field service background in the compressed air industry or strong electromechanical experience on rotating equipment such as Gas Turbines, Steam Turbines, Compressors, Gearboxes, Diesel Engines. Centrifuges, Reciprocating Engines, Controls and Instrumentation, Generators, Pumps or similar. Full product training provided. Package £40,000-£50,000 depending on experience 25 days holiday plus bank holidays Company Van Company shares scheme Pension Healthcare Additional benefitsService Engineer / Field Service Technician / Compressor Engineer Role To provide electrical and mechanical repair, service, and maintenance of centrifugal compressed air equipment at customer sites. The Compressor Service Engineer will undertake planned and preventative maintenance, provide advice, diagnostics and technical support. Provide mechanical repair, service, and maintenance plus electrical fault finding and programming on centrifugal compressors at customer sites UK wide. Installing compressed air products into all forms of the manufacturing industry. Perform emergency breakdown fault finding and repairs on centrifugal compressed air equipment. Liaise with various engineering departments.Service Engineer / Field Service Technician / Compressor Engineer Requirements Proven diagnostic skills on complicated electrical / mechanical engineering systems. Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer / Mechanical Engineer / M&E Engineer / Electrical Engineer or similar. The ability in maintaining good professional working relationships with existing and new customers. Good working knowledge of three phase electrics and controls is advantageous. Field service background in the compressed air industry or strong electromechanical experience in rotating equipment such as in Gas Turbines, Steam Turbines, Compressors, Gearboxes, Diesel Engines, Reciprocating Engines, Centrifuges, Controls and instrumentation, Generators, Pumps or similar. Full product training provided. A technical mechanical engineering degree would be advantageous. Fully remote role, willingness to travel UK wide and stay away 75% of the time

Service Engineer Bedfordshire Salary: £35,000 £45,000+ depending on experience We are a growing manufacturer of specialist machinery seeking an experienced Service Engineer to join our Customer Care team. Due to an expanding customer base and increasing machine customisation, this is an exciting opportunity to take on a varied and technically rewarding role both in-house and out in the field. Hours: Monday Thursday: 08:0017:00 | Friday: 08:0013:00 ( hour lunch break each day) Overtime will be required when travelling to and from customer sites. The Role Reporting to the Technical Director, you will be responsible for the installation, commissioning, and ongoing servicing of our machinery. Your key responsibilities will include: Conducting site visits for installation, commissioning, operator training, upgrades, and fault finding/breakdowns Writing, debugging, and commissioning software on-site for production line integrations Providing remote software diagnostics and support for machine breakdowns and upgrades Offering telephone and email support to customers experiencing machine issues Logging service, spares, and installation enquiries and keeping the support log up to date Liaising with internal teams (Spares, Service Administration) to ensure accurate customer status records Working with the Spares Team to generate parts and support quotes for customers Completing in-house quality documentation including test plans and validation documents Collaborating with internal colleagues to resolve build and design issues What We're Looking For Education Essential: A recognised qualification in Electronic, Electrical, or Control Engineering (e.g. BTEC, HNC or equivalent) Education Desirable: Degree in Electrical Engineering; chartered status or working towards it Experience Essential: Background in mechanical/electrical engineering Electrical certification for working with 3-phase installations 5+ years' experience servicing machinery 5+ years' experience in fault finding on machinery 2+ years' basic programming experience with Siemens and/or Allen Bradley software Experience Desirable: Experience installing/commissioning packaging machinery Experience commissioning production lines Experience in line validation and completing validation documentation Skills: Strong fault-finding ability with a track record of implementing reliable solutions Ability to identify and recommend product development improvements Proficient in MS Office A collaborative team player Personal Attributes: Valid passport (overseas travel required) Excellent communication skills Self-motivated and able to use own initiative Able to work to tight deadlines Willing to travel to customer and supplier sites in the UK and internationally Interested? If you have the experience and drive to thrive in a hands-on, customer-facing engineering role, we'd love to hear from you. Please apply with your CV and a brief cover letter. TPBN1_UKTJ

Electrical Maintenance Engineer - FM Service Provider - Cannon Street - Up to £45,000 - Tenants Side An exciting opportunity to join an established building services company based in Cannon Street has arisen! CBW Staffing Solutions is currently recruiting for an Electrical Maintenance Engineer to be based in a law firm located right by Cannon Street station. He or she will be required to carry out PPMs and reactive building maintenance alongside the maintenance team on site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical & general building maintenance. In return, the company is offering a competitive salary of up to £45,000, overtime, further training, and a potential route into further career progression. Hours of work Monday to Friday, 10:00am to 19:00pmKey Duties & Responsibilities Lighting (Small installation, Fault-finding, Lamping, etc) Emergency lighting tests Control Panels Changing Ballast BMS System - Monitor (i.e. Hot & cold) Maintain and update Log books Plumbing - Unblocking toilets Pumps, motorsPackage Up to £45,000 25 days holiday + Bank holidays Further training Company pension Callout 1 in 3/4 - £100 P/WRequirements Electrically qualified - City & Guilds Level 2&3 (Required) 18th Edition (Required) Must be able to provide copies of your trade certificates A proven track record in commercial building maintenance Multi-skilled Good communication skills Client FacingIf you are interested in this opportunity please send your CV to Archie Reed of CBW Staffing Solutions for more information

We are recruiting for Structured Cabling Engineers for a leading IT service provider. We have locations in London, Reading, Birmingham, Manchester, Leeds & Peterbrough. Job Description Key Requirements: • Must be very familiar with working in a Data Centre and Corporate environment, • Minimum 3 years hands-on experience within the structured cabling industry, • Good understanding of various structured cabling solutions, • Capable of installing, terminating, and testing fibre optic cables, • Experienced in the use of Fluke test equipment and fault diagnosis, • Must have Health & Safety Training (CSCS, ECS, or local/country-specific H&S qualification) affiliated with the Construction Industry Training Board, • At least 3 industry or manufacturer installation accreditations (e.g., Commscope, Corning, Panduit, or other leading brands), • Completion of an industry-recognised structured cabling and fibre optic training course (e.g., CNET CNIT, BICSI Engineer, BICSI Technician, City & Guilds, or BTEC equivalent), • IPAF and/or PASMA training preferred (or local equivalent powered access certification) Technical Skills & Experience • Experience installing cable pathways (basket trays, trunking, fibre runner), • Ability to understand and follow patching schedules / cut sheets, • Experience installing power and data connection cables within server and networking racks, • Experience in rack and stack of active network hardware, including switches, routers, and servers, • Ability to follow instructions and provide on-site support to remote network and systems administrators, • Basic IP addressing knowledge (under instruction/direction), • Experience installing and configuring UPS systems (desirable) Additional Requirements • Excellent communication skills with a professional attitude, • Experience communicating with stakeholders at all levels, • Willingness and ability to travel within the UK and internationally for project work, • Flexibility to work nights, shifts, and weekends as required per project, • Flexible working hours This is an umbrella contract, the role is Inside IR35

Building a sustainable tomorrow BAM UK & Ireland is recruiting a Building Services Electrical Engineer to join the Construction Segment, based in London. This role is to to ensure continuity of engineering processes on current and future projects and will be based out of our offices/ Sites in the London Region. Making Possible • Tender engineering, Reviewing designs, commentary, buildability studies, logistics and planning. • Project engineering. Managing design teams M&E (plus Arch / Structures interfaces). • Technical reviews of design requirements both systems and equipment, ensuring: specification compliance, legislative requirements, certificated scheme compliance (eg BREEAM, WELL etc.). • Technical evaluation of prospective manufacturers equipment submissions prior to purchase. • Technical evaluation of sub-contractors tender offers, Quality Assurance, programme and logistics. • Managing the production of coordinated installation drawings for technical compliance, buildability, operation, maintenance & H&S (CDM). What’s in it for you? What’s in it for you? In addition to an attractive salary we offer a significant benefits package which could include; ⦁ Competitive salary ⦁ Company Car or Car allowance ⦁ A wide range of family friendly policies ⦁ 8% matched pension contributions ⦁ Private healthcare ⦁ Life assurance ⦁ 26 days holiday ⦁ 2 wellbeing days ⦁ 1 volunteering day ⦁ Personal and professional development ⦁ Flexible benefit pot What do you bring to the role? • Ideally will have an Engineering Degree or equivalent and experience working in the Construction industry within Building Services. • Good knowledge of Mechanical/ Electrical systems & equipment and design / coordination requirements. • Good inter-personal & communication skills. • Working well both as a team member / leading a small team. • Must be able to manage their workload and good time management. • Good IT skills in Excel & Word; and ability to use other IT software. (specific training will be given). • Previous management experience would be beneficial for this role About BAM Building a sustainable tomorrow. That’s our mission and our promise at BAM. It’s how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. We’re on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. The application process BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at any time you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you. "Join us in Making Possible

Multi-Skilled Engineer (Electrical Bias) Salary: £50,000 – £55,000 + shift allowance Shift Pattern: 4 on, 4 off (Days only, 7:00am – 7:00pm) We are currently recruiting for two Multi-Skilled Engineers (electrical bias) to join a high-performing team at the iconic The Gherkin. This is a busy, high-profile commercial site spanning 41 floors, offering a fast-paced and varied working environment. If you enjoy a role where no two days are the same, this is a fantastic opportunity to develop your skills across a wide range of building services systems. The Role As a Multi-Skilled Engineer, you will be responsible for delivering both reactive and planned maintenance (PPM) across landlord and tenant areas. Key responsibilities include: * Carrying out electrical and multi-skilled maintenance tasks * Responding to reactive maintenance issues in a timely manner * Completing planned preventative maintenance (PPMs) * Working on a wide range of plant including generators, chillers, cooling towers, and sprinkler systems * Supporting ongoing site projects and continuous improvement works * Engaging with clients and stakeholders in a professional, customer-focused manner The Team You’ll be joining a close-knit and supportive on-site team, consisting of: * 4 Engineers * Fabric Technician * Water Technician * Operations Manager * Account Director. Qualifications & Experience * 17th or 18th Edition Wiring Regulations * HVAP / LVAP status (current or lapsed considered) * City & Guilds / NVQ Level 3 in Electrical Installation (or equivalent) * Experience working within commercial building services or facilities maintenance environments * Strong fault-finding and problem-solving skills What’s on Offer * Competitive salary with shift allowance * Opportunity to work in a prestigious, landmark building * Exposure to a wide range of plant and systems * Ongoing training and development opportunities * A genuinely supportive and team-oriented environment

Three Phase Warrant Dual Fuel Engineer Permanent Role | £42,000 Basic Salary Monday - Friday Only | No Weekends | No On-Call 40-Hour Week Induction Dates 18th May Induction - You must be available for the full 3 weeks. Benefits Company van & fuel card Pension scheme 36-day paid holiday Phone, tablet, tools & PPE provided Locations B, E, SE, RM, NW, N, EC1, PO, GU, RH, TN, BN, CF, NP, BS, PL, TQ, TA, 3 Phase Requirement (IMPORTANT) Engineers must hold a valid 3 Phase qualification before starting Candidates without 3 Phase will be considered ONLY if they are willing to book and complete a 3 Phase course themselves prior to induction We will reimburse 50% of the course cost (up to £750) Reimbursement paid after successful completion of induction and 1 full month live in the field The Role Installation of new Pre-Payment meters to prevent energy theft You will attend site with a Warrant Officer who handles all paperwork and customer interaction Your role is meter removal and installation only The Company One of the UK's largest metering companies, offering: Permanent single-fuel and dual-fuel contracts nationwide Work kept within one hour of your home postcode where possibleFull package details provided on application. Required Qualifications CCN1 MET1 Single Phase Three Phase Full UK Manual Driving Licence To apply, email

As a Senior Mechanical Engineer, you will join a supportive team based in London to complete sustainable HVAC designs for commercial, healthcare, leisure, residential, and industrial warehouses across the UK. As Senior Mechanical Engineer you will be expected to complete detailed mechanical designs including heating, ventilation, plumbing and air-conditioning using AutoCAD and Revit. You will also be expected to complete 2D and 3D models, perform heat load calculations, duct sizing, pipe sizing, and equipment selection using relevant software (e.g., Revit, AutoCAD, HAP, or Elite). • Prepare and review mechanical drawings, schematics, simulations and technical specifications in accordance with building codes, sustainability goals, and project requirements. -Design to BIM level 2 in accordance with British Standards PAS 1192-5 -Collaborate with electrical, plumbing, and structural engineers to ensure coordinated MEP layouts and avoid design clashes. • Attend internal and client meetings to resolve design issues/queries and align project objectives. -Review designs submitted by the team and respond to RFIs (Requests for Information). -Site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction. -Evaluate new materials and designs ensuring energy efficiency and cost-effectiveness. This role offers a competitive salary, flexible benefits and sustainable infrastructure projects across the UK. You will also have the chance to progress your career, mentor team members and have the option to manage the team. As a Senior Mechanical Engineer, you will be expected to have a BSc and/or an MSc Mechanical Engineering or Building Services Engineering and have experience working for UK based Consultancy completing detailed HVAC designs for ideally commercial and industrial developments using AutoCAD and Revit You are also required to have experience managing projects, mentoring team members and have a detailed knowledge PAS 1192-5 and other relevant codes. You will also be expected to have a keen understanding of BREEAM and net zero. If this role is of interest to you, please contact Jordanna Morris at Aztrum

Job Requirements Quest Global is an organisation at the forefront of innovation and one of the worlds fastest growing engineering services firms with deep domain knowledge and recognized expertise in the top OEMs across seven industries. We are a twenty-five-year-old company on a journey to becoming a centenary one, driven by aspiration, hunger and humility. We are looking for humble geniuses, who believe that engineering has the potential to make the impossible, possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers. As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then were eager to hear from you. We are looking to expand our Electrical Engineering capability in all levels of experience and are keen to hear from you if you feel youre ready to take the next step in your career. You must be a Sole UK National and qualify for Security Clearance. Job Description The Senior Electrical Engineer will work collaboratively with the customer to support infrastructure and asset development at a major dockyard facility. This role may include but is not limited to: being the technical interface with the customer, ensuring that all electrical aspects of facility modifications, redesigns and new infrastructure are scoped, developed and delivered, to meet operational requirements, safety standards and compliance obligations, whilst working within a team of electrical engineers supporting various projects. Key Responsibilities: Engage directly with the customer to understand requirements and provide electrical engineering support. Scope, design and propose modifications to existing assets or new facilities based on customer needs and system limitations. Engage in the full lifecycle development of electrical projects, from conceptual design through to implementation and maintenance. Assess and approve technical documentation prior to customer submission, ensuring technical, regulatory and safety considerations have been addressed. Liaise with multi-disciplinary teams and stakeholders to align electrical designs with broader infrastructure projects. Support the planning and execution of installation, commissioning and testing phases as needed. Provide technical input to project documentation , risk assessments and progress reporting. Work Experience Qualifications & Experience HND (minimum) in Electrical Engineering or a closely related discipline Chartered Engineer (CEng) status preferred. Relevant electrical engineering experience in a highly regulated industry (e.g., nuclear, maritime, infrastructure, oil and gas etc). Proven track record in scoping, designing and modification of electrical systems (LV/HV systems, lighting, power distribution etc.) Strong knowledge of relevant safety regulations and electrical standards (e.g., IEEE, IEC). Desirable Attributes: Good Communication skills - Makes clear and convincing oral presentations; listens effectively; clarifies information as needed. Proficient with electrical CAD software and tools such as ETAP, AutoCAD Electrical, or similar. Experience in working in a dockyard, marine, Defence or MoD environments particularly with asset lifecycle support . Knowledge of High Voltage (HV) Systems used in large scale or industrial facilities. Knowledge of building services or power distribution network. TPBN1_UKTJ

Location: Site-based, Bridgwater, Somerset - HYBRID (minimum 3x days office attendance AND 2x days remote working) Duration: Currently approved until 31dec26 (renewable) Status: Contract INSIDE IR35 Morson Edge are currently working with a major player in the Nuclear New Build sector who have a requirement for a Technical Lead Engineer (Welding/ Mechanical ) to join their established site-based team on a contract basis. If you're looking to gain unique experience on one of Europe's largest construction projects, this could be one for you. The Joint Design Office (JDO) The JDO responses to site-based queries during construction, installation, and commissioning and facilitate closure of post-handover open points [PHOP] arising from site and by exception only PHOP's originating upstream of handover to site or subsequent design NCR. The JDO is also responsible for the treatment of Nuclear Safety Category 3 and 4 site queries as part of the Intelligent Customer role under a Technical Delegation of Authority given from the Project Design Authority. The JDO is also responsible for managing design changes and design configuration during construction, installation and commissioning. It is also responsible for the management of non-permanent design and As-Built information. Job Purpose / Overview The Technical Branch within the JDO delivers Category 1 & 2 changes with support of the wider business The successful applicant will be a key member of the wider Technical Branch of the Joint Design Office [JDO], operating as part a team responsible for resolving critical, cross discipline design issues and engaging multidisciplinary specialists. The role offers exposure to a broad spectrum of technical topics across the project, driving resolution of technical issues, strengthening engineering delivery and enhancing resilience of the JDO by proactively mitigating key project engineering risks. Typical Accountabilities (not limited to) Provide oversight and approve Nuclear Safety Category 3 changes - specifically associated with welding/mechanical Lead joint Task Forces for Nuclear Safety Category 2 changes. Collaborate with colleagues to achieve high-quality technical outcomes and uphold safety-critical standards. Actively contribute during meetings, fostering constructive, delivery-focused discussions and supporting timely technical decision making. Support the identification and implementation of standardised technical solutions for recurring construction, installation and commissioning challenges (welding./mechanical related). Criteria Experienced Welding/Mechanical Engineer with background to include R-CCM (appreciation of welding in a site and fabrication setting) You MUST be approachable, adaptable, communicative and proactive. You MUST have excellent communication and presentation skills as you will be liaising with a variety of stakeholders across the wider business at various management levels. You will demonstrate and apply technically sound engineering judgements. With the ability to value-add in the resolution of issues of high complexity/risk in your own technical discipline/area autonomously and contribute to the substantiation of the safety case where required You will have the ability to interpret complex technical information, assess its impact on plant performance, and communicate this clearly to stakeholders Understanding of civil and mechanical interfaces Experience of onsite engineering with an understanding of design models and engineering drawings. Be a competent user of Microsoft software Desirable - Other (not essential) Chartered Engineer (or equivalent) Previous experience working in the Nuclear Industry Working in engineering design Safety Case Knowledge and previous experience of Nuclear Safety Categorisations TPBN1_UKTJ

Fire Alarm Commissioning Engineer - London We are currently recruiting for an experienced Fire Alarm Commissioning Engineer to join a growing and well established fire and security business covering London and the surrounding areas. This is an excellent opportunity for a technically strong engineer who specialises in commissioning and wants to work on a mix of commercial and high value projects. Role Overview The role will involve commissioning, testing and handover of fire alarm systems across a range of commercial environments. You will play a key role in ensuring systems are delivered to a high standard and fully compliant. Key Responsibilities Commissioning fire alarm systems on commercial projects Working on addressable systems including fault finding and final testing Programming and configuration of systems Supporting installation teams where required Carrying out system handovers and client demonstrations Ensuring all works meet BS5839 standards Completing all relevant documentation and certification Requirements Proven experience as a Fire Alarm Commissioning Engineer Strong knowledge of addressable fire alarm systems Experience with Notifier and Advanced systems preferred Good understanding of BS5839 Ability to work independently and manage workload Full UK driving licence Package Salary: £47,000 - £55,000 (DOE) Overtime available Company vehicle or allowance Ongoing training and development Long term progression opportunities INDAV TPBN1_UKTJ

Are you a Service & Repairs Engineer looking for your next opportunity? Our client is a long‑established organisation working across the Commercial, Domestic, Residential, and Service sectors. In this role, you will carry out a full range of on‑site servicing, repair, and installation work on both domestic and commercial contracts throughout the UK. The ideal candidate will already have experience in a similar service and repair position. Service & Repairs Engineer Permanent Dependent on Experience Monday – Friday 8.00am – 4:30pm (42.5 hours per week) London Area Service Engineer Role Responsibilities: Understand and adhere to all aspects of Health and Safety, Risk Assessments, and Method Statements Maintaining accurate data using a mobile device (customer, asset & contract information) Carrying out site surveys and providing relevant information to the office Actively be aware of opportunities to promote Perform Servicing and Commissioning of pumps and pressurised systems Perform fault finding and repairs of pumps and pressurised systems Assist with on-site installation of pumps and pressurised systems Complete and submit all required paperwork Communicate with the customer to ensure satisfaction and implement any necessary Provide accurate information to the relevant department or Manager Provide training and guidance to colleagues Service Engineer Skills & Qualifications: Knowledge of pumps and pressurised systems Servicing and Commissioning of pumps and pressurised systems Fault finding and minor repairs of pumps and pressurised systems UK Driving Licence Organised and self-motivated Attention to detail Customer focused A pleasant and friendly ‘can-do’ attitude Health and Safety training required for the role Good time keeping Be flexible and adaptable If you feel you’re a good fit for this position, please click ‘apply

Ventilation Engineer (MVHR / PIV / HVAC Engineer) Location: London & Surrounding Areas (Field-Based) Salary: £38,000 – £40,000 About the Role RGE Services is a growing engineering services company specialising in ventilation, HVAC, and air management systems across residential and commercial properties. We are looking for an experienced Ventilation Engineer / HVAC Engineer with strong knowledge of MVHR, PIV systems, and ventilation fans (including VIVID units). This is a field-based role across London and surrounding areas, ideal for someone who enjoys hands-on work, fault finding, and working independently across a variety of sites. Key Responsibilities * Install, service, and commission MVHR (Mechanical Ventilation with Heat Recovery) systems * Install and maintain PIV (Positive Input Ventilation) systems * Work extensively with VIVID ventilation fans and similar units * Diagnose faults and carry out repairs on ventilation systems * Install and service MEV systems and extraction units (bathroom, kitchen, whole-house) * Carry out ductwork installation, upgrades, and modifications * Perform airflow testing and system balancing * Complete basic electrical work (wiring, fault finding, safe isolation) * Ensure compliance with UK Building Regulations and Health & Safety standards * Complete job reports and documentation accurately Requirements * Experience as a Ventilation Engineer, HVAC Engineer, or similar role * Strong experience with MVHR and PIV systems * Experience working with ventilation fans (e.g. VIVID, inline, centrifugal) * Electrical knowledge or experience (essential) * Understanding of airflow, ducting, and system balancing * NVQ Level 2/3 in HVAC, Ventilation, or similar (preferred) * 18th Edition (desirable) * PASMA / IPAF (desirable) * Full UK driving licence What We Offer * £38,000 – £40,000 salary (DOE) * Company vehicle & fuel card * Overtime opportunities * Tools, uniform, and equipment provided * Ongoing training & career development * Pension scheme * Paid holidays * Long-term career progression with a growing company

Lead QA/QC Engineer – London We are seeking a Lead QAQC Engineer to join our team in London. This is an opportunity to play a key role on a high-profile site, leading all quality assurance and quality control activities to ensure compliance with stringent healthcare standards. You will be responsible for overseeing inspections, documentation, and quality processes, ensuring all works are delivered to the highest standards while driving excellence through to successful project completion. Your Team You'll join a hardworking, ambitious, and supportive team where your ideas matter and your development is genuinely prioritised. At Dornan, we invest in long-term career growth through structured progression pathways and continuous training support. The Role As a Lead QA/QC Engineer you will, as part of a dedicated site quality and inspection team, be expected to co-ordinate the establishment and implementation of the Project quality plan, site inspection and test procedures of the subcontracted installation. The Lead QA/QC Engineer will be an exemplar ambassador for the company and its values; integrity, dependability, safety, pride, quality. Working closely with the QA/QC Manager, your duties may include (but are not limited to): Familiarisation with the scope of each system, specification and installation, focusing particularly on pipe work installation and weld quality Familiarisation of the requirement of the Quality plan, the General Contractor quality plan and the client quality plan Implementation of the site inspection and test process as prioritised for each system Attend quality review meetings with the General Contractor and client as required Provide regular feedback to your line manager on the Quality process on site and issue improvement recommendations, in line with the weekly project reporting structure Generate and close out punch lists and generate quality statistics for tracking and monitoring purposes. Co-ordinate with the client and subcontractors on the scheduling and prioritising of system walk downs. All other reasonable tasks assigned to you from time to time from your manager. About You Your Experience Ability to priorities workload Recognises own strengths and weaknesses and committed to ongoing development Acceptance of responsibility and accountability Your Qualifications Detailed knowledge of the QA /QC Engineer role Commercial understanding Health, Safety and Environmental systems Knowledge of the team's strengths and weaknesses To find out more information please contact Sean Hitchman on (phone number removed) / (url removed) #LI-SH1

As Domestic Heating Engineer you will carry out servicing and remedial repairs to gas fired heating boilers within occupied and unoccupied properties. To meet the requirement and expectations of the Client or his/her representative in accordance with the Clients detailed specification, in a timely fashion and in compliance with current gas legislation. Location: Hertfordshire (Cheshunt) and surrounding areas. Benefits as Domestic Heating Engineer: • Health & wellbeing programme, • Salary Sacrifice Electric Car Scheme, • You will be part of a friendly and busy team with excellent training and support with plenty of opportunities for career progression and advancement, • You will be working for a company that recognises individual talent, encourages professional development and rewards success, • 21 days holiday increasing by 1 extra day every 2 years up to a maximum of 25 days, plus statutory days, • Pension scheme - Auto enrolment | Life Insurance, • Employee Assistance Programme | Employee Referral Scheme | Staff Discounts, • Company Van, Mobile Phone and Uniform provided - Private Use of Van is Not Allowed, • Monday to Friday | 3-month probationary period, • We are an equal opportunities employer Main Responsibilities as Domestic Heating Engineer: • To have a detailed knowledge and experience of main boiler manufacturer installation and servicing requirements and instructions, • To be proficient in carrying out full commissioning of gas heating boilers and associated controls on completion of installation or servicing works, • To be able to demonstrate and have a good fault finding/diagnostic skill and to carry out necessary repairs/replacement of defective parts etc., • To be competent of draining down and re-filling of heating system/s in order to remove and replace defective/leaking radiators or associated isolation valves, • To ensure that all work carried out complies with the relevant sections of the ‘Health and Safety at Work Act’ (risk assessment, asbestos awareness etc.), • To take part in ‘out-of-hours’ emergency call out on a rota basis, • Any other duties as reasonably requested The Ideal as Domestic Heating Engineer Will • Have good practical skills and problem-solving skills and the ability to work carefully, methodically and safely, • Be able to work with minimal supervision as the majority of work is carried out in a lone working environment, • Be a good team player, have good communication skills, both written and spoken and good customer care skills, • Have a valid CSCS card, • Have experience of boiler fluing arrangements, encompassing building fabric or materials used that may have to be penetrated, • Be asbestos aware, • Be recognised and trained to work with vulnerable persons, • Have knowledge of the risk assessment process, • Be willing to work in confined spaces and at height, • Good Breakdown knowledge, • Be able to cover callout on a Rota basis Essential Qualifications/Skills • Must hold current ACS qualifications (CCN1, CENWAT, CPA1, CKR1, HTR1), • Full UK Driving Licence If you believe that you have the talent, energy and spirit and are eager to learn, then we want to hear from you

JR298: Field Operations Technician (Electrical) Location: South London Salary: £40,000 - £43,000 Per Annum Overview: First Military Recruitment is working in partnership with our reputable client who is seeking a Field Operations Technician (Electrical) to join their team based in South London. As a Field Operations Technician (Electrical), you will supervise and support a team of engineers delivering electrical installation, maintenance, and repair services in client properties. You will carry out site visits, quality control inspections, and provide technical support while ensuring compliance with safety standards and industry regulations. This role requires strong leadership, technical knowledge, and excellent communication skills, with a customer-focused approach to service delivery. Duties and Responsibilities: Must have experience of domestic and commercial electrical installations, including boiler control circuit installations. Supervise and support engineers across multiple sites, ensuring work is carried out safely, on time, and to high quality standards. Undertake duties as a Qualified Supervisor (QS) with the NICEIC by reviewing, signing off, and ensure accuracy of NICEIC electrical certificates (EICs, MEWCs, EICRs) produced by the electricians. Perform site visits, toolbox talks, van inspections, and spot checks to ensure compliance with company procedures and PPE requirements. Conduct and document quality control checks, reporting findings and recommending corrective actions. Attend technical visits to diagnose and resolve electrical faults, ensuring systems are safe and compliant. Liaise with contract managers, suppliers, and internal teams to coordinate works, order materials, and support pricing and obtaining quotations. Monitor engineer performance, attendance, punctuality, and training needs. Ensure RAMS and other Health & Safety paperwork are followed and maintained for each project. Provide technical coaching and mentoring to engineers to reduce repeat visits and improve standards. Complete daily administrative tasks including reporting, planning, and logging site visits. Must have a proactive attitude and the ability to work on your own initiative. To undertake urgent tasks as they arise and assist other staff within the team Any other duties as may reasonably be requested by the Head of Electrical Operations. Skills, Experience and Qualifications: Previous Electrical experience minimum 5 years Full clean driving license Good understanding on how to use Excel and Word etc Able to work alone and within a team Ability to work to tight deadlines and within set timescales City and Guilds 2360/2330 PART 1&2 NVQ level 2 or equivalent (Core Technical certs) 18th Edition Qualified City and Guilds - Inspection & Testing 2391 or equivalent NVQ Level 3 (Evidenced based practical work portfolio) Achievement Measure 2 (AM2 or other)

We are looking for a Dual Fuel Engineer to cover: Notting Hill • Fulham • Holborn • Hampstead Choice of £45,000 salary / £200–£275 day rate / £240 CIS Van, fuel, tools & uniform options available No call‑out • No weekend work Orion Smart Metering partners with major UK energy suppliers and is expanding across the Country. We’re looking for experienced Dual Fuel Engineers to join our growing team. What You’ll Do Install smart gas and electric meters in domestic homes Deliver excellent customer service Work safely and in full compliance with regulations Manage stock and meet KPIsPay Options Salary: £45,000 33 days holiday van, fuel, tools & uniform Umbrella PAYE: £200/day (company van) or £275/day (own van) CIS: £240/day (own van, fuel & tools)Performance Bonus Daily bonus after 6 points £50 per point from point 7 onwards 1 point per asset (2 for dual), 0.5 per comms/transactional Example: 4 dual installs £100 bonus that dayBenefits No call‑out No weekend work Supportive management and long‑term progressionWhat You Need Minimum 24 months’ Dual Fuel installation experience Strong communication and customer service skills Good organisation and basic IT literacy Professional, reliable and safety‑focused approachApply Now Apply today if you’re an experienced Dual Fuel Engineer ready for your next step. If you don’t hear back within 5 working days, please consider your application unsuccessful

Water Hygiene Engineer London with some paid for UK travel £35k per annum & vehicle & unlimited overtime & some travel time We are proud to be representing a well-established, stable and successful Environmental and Water Hygiene Specialist that is looking to appoint a dependable Water Hygiene Engineer based in London/South East. What they offer: Competitive salary Generous holiday allowance Company vehicle Pension Door-to-door payThis vibrant position offers great potential for career development and a diverse array of engaging sites to work on. You will benefit from valuable insights provided by market leaders. Known for their innovative approaches and dedication to environmental sustainability, their commitment to the development and nurturing of talented professionals within their team fosters a dynamic work environment, that not only enhances individual growth but also drives the organisation toward achieving its long-term environmental goals. Requirements for candidates: 3 years experience as a water hygiene engineer Willing to stay away a couple of time a quarter Willingness to attend courses and develop skills.Duties and Responsibilities: Closed system analytical testing and remediation. Working in compliance with ACOP L8 guidelines. Dead leg removals. Tank inspections and closed system analysis Taking water samples. Spa Balance Tank Cleans. Temperature monitoring. Disinfection of buildings. Closed system dosing. Calorifiers pasteurisation. Clean and chlorination's of Water storage tanks/Cooling Towers. TMV testing/Servicing. Shower Head descale & disinfections. Pre-commission cleaning and flushing. Desirable to have experience and or training in water softener installation, servicing and problem-solving including clack, fleck and autotrol softener units. Plus, RO Plant service and installationInterested in this or other roles in Water Hygiene, please do not hesitate to contact Russel Cleverley in CONFIDENCE . We have many more vacancies available on our website

Coffee Machine Engineer Ilford, London and Surrounding Areas £33,000 to £40,000 DOE + Overtime + Van (which can be used for private use) + Holidays + Bank Holidays + Call Out 1 in 4 Weekends 8AM - 6PM Monday to Friday with flexibility Service Engineer required for a well-established and growing company who provide and service coffee machines for a vast range of reputable companies. On offer is comprehensive training on their products. Candidates will transfer from a coffee machine servicing background and must be able to demonstrate strong electrical skills in both 3 phase and single phase and basic mechanical skills will be considered. Candidates must have bean to cup machinery knowledge. The role will be working to an allocated service route and attending customer sites to carry out service, repair and installation work. The successful candidate will be required to complete service documentation and maintain levels of stock. The company service every major type of coffee machine, are well established and have built a brand associated with quality and professionalism. The Coffee Machine Engineer Role: • Installation and maintenance of coffee machines at customer sites * Planned maintenance and Reactive breakdown work * Field service role in and around Ilford, London and the surrounding areas * Monday to Friday with a requirement to work some overtime and 1 in 4 weekends within an on call rota basis. The Coffee Machine Engineer: • Electrical/Mechanical service experience * Ideally transfer from a coffee machine service/repair background * Experience of both 3 phase and single phase * Must have bean to cup machinery knowledge

Field Service Engineer A specialist engineering provider is seeking a Field Service Engineer to install, service and maintain gas monitoring and control systems across commercial and industrial sites. This is a mobile role covering locations throughout the UK. Key Responsibilities for the Field Service Engineer: * Installation, servicing and maintenance of leak detection and monitoring systems * Fault finding, testing and commissioning of equipment, including alarms and communications * Control panel wiring, on-site modifications and technical troubleshooting * Planned preventative maintenance visits * Providing basic system training to customers on-site Typical environments include installations for supermarkets, food production sites, cold storage facilities, commercial premises and many more. Candidate Requirements for the Field Service Engineer: * Field-based engineering experience with electro-mechanical equipment * Basic electrical knowledge * CSCS card * Strong fault-finding and problem-solving skills * Good IT skills and clear communication Desirables for the ideal Field Engineer: * 17th or 18th Edition electrical qualification * F-Gas certification * Experience in monitoring systems Package & Benefits for the Field Service Engineer: * Permanent, long-term role * Full product training provided * Company vehicle and specialist tools * Monday to Friday working pattern * Paid travel time, expenses and optional overtime * Pension scheme and generous holiday allowance If you feel this role is a good match to your skillset and experience then please get in touch today

M Pro Recruitment is currently working with a well-established fire and life safety company based in Crawley, who are looking to recruit an experienced Fire Alarm Engineer to cover London and the surrounding Home Counties. This is an excellent opportunity for a skilled, multi-disciplined engineer with strong experience in fire alarm installation, commissioning, and servicing, particularly those familiar with Gent, Notifier, and similar systems. The Role As a Fire Alarm Engineer, you will be responsible for delivering high-quality service, maintenance, and installation work across a varied customer base, including retail units, office blocks, and commercial premises. Key responsibilities include: Carrying out planned servicing and preventative maintenance of fire alarm systems Fault finding and reactive repairs across a range of systems Completing small works, modifications, and system upgrades Commissioning fire alarm systems to British Standards Opportunity to work on larger installation projects for engineers looking to further develop their installation experience Providing a professional and customer-focused service within a defined area Ensuring all work is carried out in line with BS5839, Health & Safety legislation, and company procedures The Ideal Candidate Minimum 5 years’ experience in fire alarm installation, commissioning, and/or maintenance FIA Installation & Maintenance Modules (essential) Experience with open and closed protocol fire alarm systems Strong knowledge of panels such as Gent, Notifier, or equivalent Understanding of electrical design with fire alarm elements Working knowledge of BS5839 and current Health & Safety regulations Ability to work to time-sensitive deadlines Strong fault-finding skills with excellent attention to detail Full UK driving licence Additional Information This role primarily services London and surrounding areas. Candidates with a multi-skilled background across installation, commissioning, servicing, and small works within the fire industry will be highly advantageous

Fire & Security Service & Maintenance Engineer Surrey & South London (occasional North London travel) £38,000 - £45,000 Basic DOE + Overtime + Vehicle + Package We are currently representing a highly respected and rapidly growing Fire & Security provider seeking an experienced Service & Maintenance Engineer to join their established team covering primarily Surrey and South London, with occasional works in North London. This is an excellent opportunity to join a forward thinking, financially strong organisation that has built a solid reputation for delivering high quality, compliant solutions across commercial, public sector and high end residential environments. The business continues to invest heavily in its engineers, infrastructure and long term growth strategy. The Role As a Service & Maintenance Engineer, you will be responsible for maintaining, fault finding and repairing a range of Fire and Security systems across an established client portfolio. Your responsibilities will include: Planned preventative maintenance across Fire Alarm, Intruder, CCTV and Access Control systems Fault finding and reactive call outs Small remedial works and minor upgrades Accurate completion of service documentation Ensuring compliance with current industry standards and regulations Delivering a professional, customer focused service at all times Work is predominantly across Surrey and South London, with occasional coverage into North London when required. Systems Experience (Desirable) Fire alarms including addressable and conventional systems CCTV systems including IP based platforms Intruder alarms such as Texecom, Galaxy or similar Access control systems such as Paxton, ACT or similar What We Are Looking For Proven experience servicing and maintaining Fire & Security systems Strong fault finding ability Good knowledge of industry standards Full UK driving licence Professional and customer focused approach What's On Offer £38,000 - £45,000 basic salary depending on experience Overtime available Company vehicle Stable, long term career opportunity Supportive management structure Ongoing training and development This role would suit a Fire & Security Engineer, Service Engineer, Maintenance Engineer, Multi Disciplined Engineer or Fire Alarm Engineer looking to join a business that values quality over volume and invests properly in its team. YOU MAY BE A; Junior Fire & Security Engineer, Trainee Fire & Security Engineer, Fire Alarm Engineer, Security Engineer, Service Engineer, Installation Engineer, Electrical Engineer, Apprentice Engineer INDAV

Job Title: Intermediate/Senior Mechanical Engineer - 12 Month Contract or Permanent Location: Mostly remote (occasional travel to London) Contract Rate: £45-£53 per hour outside IR35 or Permanent Salary: £50-£60k About the Role: We are seeking an experienced Mechanical Engineer to join a dynamic team focused on innovative engineering solutions in the water and environmental sector. This role offers the flexibility of primarily remote work, with occasional visits to the London office, and provides the opportunity to work on cutting-edge projects in a collaborative environment. Key Responsibilities: Design, develop, and optimise mechanical systems and components. Prepare detailed engineering drawings, specifications, and documentation. Work closely with project teams to deliver solutions from concept through to installation and commissioning. Support project planning, risk assessment, and troubleshooting mechanical issues. Ensure compliance with relevant industry standards, codes, and best practices. Requirements: Degree in Mechanical Engineering or related discipline. Proven experience in a similar intermediate to senior engineering role. Strong knowledge of mechanical design principles, CAD software, and mechanical systems. Experience working on projects in the water, environmental, or industrial sector is a plus. Excellent problem-solving, communication, and team collaboration skills. Benefits: Flexible working arrangements with mostly remote work. Exposure to high-profile and innovative projects. Supportive and collaborative team environment. To find out more, please contact Molly Brown. We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Audio Visual Field Service Engineer (residential) - I am now looking for an AV experience residential service engineer with either a good residential audio visual background (4 years) to take on av projects and systems that have been integrated into millionaires and billionaires homes, apartments, penthouses and beyond. This role is with a residential home automation company who have consistently delivered to the highest standards. This role will be a mix of preventative service check / updates which will see you attending clients' homes predominantly in London and the homes counties but on occasion further afield. I will need to see from you a technical CV that covers the following: • Crestron Control, • Lutron lighting Service / Integration / Programming, • IT home networks / Cisco (set up / configuration). Wyrestorm, • Screen / Projector Lifts, • Multi-room Audio, home cinema, • Audio Visual Racks, smarthome love and appreciation, • Client facing, • Extremely technical and an excellent head for fault finding, • Digital Media Systems If you have this defined skill set and you are extremely client facing then please send me your full technical CV with all kit and hands on skills clearly shown. NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK AND BE WORKING LEGALLY ALL INFORMATION MUST BE IN THE CV NOT IN A COVERING LETTER AUDIO VISUAL AV A/V A-V AUDIO/VISUAL AUDIO-VISUAL FIELD SERVICE ENGINEER CONTROL4 CRESTRON SOUND LUTRON RESIDENTIAL CEDIA SMARTHOME KNX WYRESTORM AUTOMATION INTEGRATION INSTALLATION RACK LONDON SURREY HERTS HERTFORDSHIRE MIDDX MIDDLESEX

Security Engineer Company Based in Borehamwood Up to £40,000 Company Vehicle, Fuel Card, Overtime, Bank Holidays, Holidays including Christmas 1 x Security Installation Engineer 1x Security Service Engineer Engineer to be no more than a hour away from Borehamwood Multi Skilled Fire and Security Engineers required. To apply for this opportunity you must have or hold the following: • Intruder Service Experience, • Excellent customer service skills, • CCTV IP Knowledge, • Access Control, • Fault Finding experience, • Ability to work by yourself and within a team, • Full UK Driving license This is a well-established and highly recognised organisation in the Fire and Security industry. We offer a wide range of services including design, maintenance and installation of fire systems, intruder, CCTV, and access control. Due to planned growth within the service/installation department. We are now actively looking to recruit an experienced Fire and Security Service Engineers. Benefits Include: • Company Vehicle, • Fuel Card, • Overtime Available, • Mobile Phone, • Call out Allowances, • Generous Annual Leave, including Bank Holidays and Christmas If you are looking for a new challenge and want to work for a forward thinking leading company who will continue to expand and develop. Please contact George on the listed number (phone number removed) or ideally e-mail with a copy of your current CV

IN2-AV are working exclusively with a long-established technology integrator that delivers premium residential smart-home, lighting, shading, cinema, security and network systems across some of London’s most prestigious homes. Due to continued growth and a strong pipeline of landmark projects, we are seeking an experienced Senior Engineer to take a leading role in system installation, commissioning and client-facing delivery. This is an exceptional opportunity if you enjoy working on complex, design-led projects and want to stay hands-on with cutting-edge home technology. The Role As Senior Engineer, you’ll be responsible for delivering fully integrated home-technology systems from post-cabling stage through to final sign-off. This includes detailed configuration, final-fix installation, commissioning, documentation, and collaborating closely with programmers and wider project teams. You will be the technical lead onsite, ensuring seamless integration of AV, networking, security, lighting control and shading solutions—while representing the company with professionalism to clients, contractors and design partners. Key Responsibilities Take ownership of projects following the infrastructure phase and deliver fully functional systems to an exceptional standard Carry out off-site configuration, testing and rack build where required Final-fit installation of equipment across AV, lighting, shading, IT and security systems Onsite programming/commissioning in cooperation with control-system programmers Work collaboratively with main contractors, interior designers, architects and third-party technology partners Maintain clear and accurate documentation and ensure timely progress updates Complete snagging within agreed timeframes Conduct smooth handovers to the service/support teams with full client and system information Uphold the company’s reputation through excellent communication and client engagement Hours: 09:00–17:00 with paid overtime for additional work authorised by your line manager. Experience & Technical Skills We’re looking for an engineer with strong experience in premium residential installation environments, ideally with the following capabilities: Technical knowledge Multi-room AV systems (audio and video distribution, home cinema) IT networking (routers, switches, Wi-Fi, remote access and monitoring) Lighting & shading control platforms (e.g., Lutron, Crestron, Control4, or equivalents) CCTV, door entry and access-control solutions Satellite/aerial and fibre-based systems Familiarity with integrating third-party subsystems (e.g., BMS, HVAC controls) Experience working with: Luxury-residential clients and representatives Architects, interior designers, lighting designers Main contractors and specialist subcontractors Soft skills & competencies Strong communication and professional client interaction Excellent organisational skills and attention to detail Ability to work independently and proactively Sound judgement and problem-solving ability Adaptability across changing site conditions Resilience under pressure and tight project timings This job was brought to you by IN2-AV, specialist recruiters into the Residential Audio Visual sector

Sprinkler Service Engineer London Salary £Competitive + Company Van + Fuel Card The Client They are a leading provider of innovative fire safety solutions, specializing in the design, installation, and maintenance of advanced fire detection and suppression systems. With a commitment to safeguarding lives and property, the company delivers tailored, high-quality services across various sectors, ensuring compliance with stringent safety standards. Their expert team leverages cutting-edge technology to offer reliable, efficient, and discreet fire protection solutions that blend seamlessly into any environment. This role would suit a Service Engineer, Multiskilled Engineer, Commercial Sprinkler Engineer, Sprinkler Service Maintenance Engineer. They are growing our service department, who cover clients nationwide and pride ourselves on excellent service and delivery, after installation servicing is key to keeping our clients systems fully compliant and operational. Whether it is special risk, detection or any sprinkler system, we provide service and maintenance of systems combined with 24/7 emergency call-out. Responsibilities • Must have experience in servicing all types of the following valve sets - Wet, dry, alternate, deluge and pre-Action., • Must be able to carry out 5-point flow tests on sprinkler fire pumps and general service checks., • Sprinkler Installation Level 2 qualified would be desirable but not essential., • Plumbing / Piping Knowledge & fault finding on sprinkler systems – essential., • Previous experience gained within Commercial / Industrial buildings environment., • Experienced in small works install., • Understanding and exposure to reporting electronically., • Full driving licence, • DBS check, • Flexible approach to working hours and location, as will cover large area of the UK, • Ability to work unsupervised or in a team, • Professional, pleasant attitude and smart in appearance, capable of communicating diplomatically to strengthen customer relationships., • Polite communication skills and ability to know when to escalate problems, • IT literate as all jobs are booked on tablets, • Ability to problem solve and use own initiative when on site, • Be punctual and reliable, • Provide an excellent customer experience What you will receive from Argus Fire • Competitive salary, including overtime and callouts, • Life Insurance, • Company Vehicle, • Mobile Phone, • Fuel Card, • Work Tablet, • 25 days holiday, plus bank holidays, • Argus Fire branded clothing, • Core working days Monday - Friday (when not on call) This role would suit a Service Engineer, Multiskilled Engineer, Commercial Sprinkler Engineer, Sprinkler Service Maintenance Engineer For information on the role please call Giles Churchill – Director - Fire at Amida Solution on (phone number removed). I am available to book calls in from 8am to 8pm Mon to Fri & Weekends

My client is seeking a passionate and driven Geothermal Systems Engineer to join theirsmall, dynamic team dedicated to designing low-carbon geo-energy structures adopting our USP, the Hiperpile. This role focuses on the development of Hiperenergy solutions and the integration of Hiper systems into a variety of applications including residential and commercial buildings, heat networks, data centres as well as large-scale infrastructure projects. Our work covers the disciplines of deep foundation and MEP design, installation and maintenance so a systems-thinking mindset and a willingness to engage with multidisciplinary challenges are essential. This position is ideal for an Engineer with 3–4 years of experience in geotechnical or energy engineering, and a strong interest in sustainability and innovation. Role Overview The Geothermal System Engineer will be responsible for designing, modeling, and optimizing geothermal heating and cooling systems for residential, commercial, and industrial applications. You will collaborate with cross-functional teams to deliver high-performance solutions that meet technical, environmental, and regulatory standards. Key Responsibilities Design and engineer geothermal systems, including ground-source heat pump configurations, loop fields, and distribution systems. Perform site assessments, feasibility studies, and energy modeling using industry-standard tools. Create detailed technical drawings, specifications, and documentation for installations. Conduct thermal response testing and analyze geological and hydrogeological data. Work closely with project managers, drilling teams, and construction partners throughout project life cycles. Ensure all designs comply with relevant codes, regulations, and sustainability objectives. Troubleshoot system performance issues and provide technical support during commissioning. Contribute to R&D initiatives to enhance system efficiency and innovation. Qualifications Bachelor's or Master’s degree in Mechanical Engineering, Environmental Engineering, Geothermal Engineering, or a related field. Experience in geothermal system design or HVAC engineering (GSHP experience highly desirable). Proficiency with design and simulation software (e.g., LoopLink, GLHEPro, AutoCAD, Revit, EnergyPlus). Strong understanding of thermodynamics, heat transfer, and fluid mechanics. Familiarity with drilling processes, ground-loop installation methods, and hydrogeology. Excellent problem-solving skills and the ability to communicate complex technical concepts clearly. Professional Engineering (PE) license or willingness to pursue one (preferred). What They Offer Competitive salary and benefits package Opportunities for professional development and certification A collaborative, environmentally driven workplace Flexible working arrangements Chance to make a real impact in the renewable energy sector

Fire & Security Engineer (Fire Alarms, Access Control, CCTV & Intruder Alarms) – London - Basic Salary £28,000 - £48,000 Per Annum Package Overview: • £28,000- £48,000 (negotiable depending on experience), • Plenty of opportunities to increase earnings if wanted, • Company vehicle, pension scheme, fuel card, laptop & mobile phone, • Hours of work- Monday to Friday (40 hours a week), • Excellent progression and training opportunities, • Area covered – London, • Field based role covering a number of sites, • The work is strategically allocated based on each engineer’s location Company Overview - Fire & Security Engineer (Fire Alarms, Access Control, CCTV & Intruder Alarms) An excellent opportunity has become available within a well-established and highly regarded company in the fire and security industry. This growing organisation is recognised for its expertise in designing, installing, and maintaining cutting-edge systems for clients across commercial, residential, and industrial sectors. You will join a supportive and collaborative team that values quality and teamwork. Work is carefully planned and allocated based on each engineer’s strengths and location to ensure high standards and efficiency. The role comes with full training, ongoing support, and the tools needed to carry out your work effectively and confidently. Fire & Security Engineer (Fire Alarms, Access Control, CCTV & Intruder Alarms) Role and Responsibilities: • Install fire alarms, CCTV, access control, and intruder alarm systems in accordance with industry standards and client specifications., • Perform regular servicing, testing, and preventative maintenance on fire and security systems to ensure optimal performance., • Diagnose and resolve faults, ensuring systems are fully functional and meet safety regulations., • Carry out system upgrades or modifications to meet client requirements and comply with updated standards., • Complete and maintain accurate records, including service reports, installation certificates, and maintenance logs., • Work closely with team members and other trades on-site to ensure seamless project delivery. Fire & Security Engineer (Fire Alarms, Access Control, CCTV & Intruder Alarms) Skills & Experience: • Strong technical knowledge of fire alarms, CCTV, intruder alarms, and access control systems., • Excellent fault-finding and problem-solving abilities., • Ability to interpret technical drawings and specifications., • Good understanding of British Standards and industry regulations., • Ability to work independently and as part of a team., • Strong organisational and time management skills., • A methodical and detail-oriented approach to work., • A commitment to health and safety practices., • Proven experience in the installation, maintenance, and servicing of fire and security., • Previous experience in both domestic and commercial environments is advantageous. Why apply for this role? • Excellent training and development opportunities., • Plenty of opportunities to increase your earnings., • Excellent work life balance., • Supportive work environment., • Carefully planned out work schedules., • Opportunities to train in other areas across the business. DON'T MISS OUT ON THIS GREAT OPPORTUNITY - APPLY NOW Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful. Industry Key Words: Installation Engineer, IP, Integrated Security Systems, Maintenance Engineer, Service Engineer, Repair Engineer, Fire and Security Engineer, Security Engineer, Commissioning, Fire Alarm, Security Systems Engineer, Fire Extinguisher, Emergency Lighting, Nurse Call Systems, Security Systems, CCTV, Close Circuit Television, Automatic Number Plate Recognition, ANPR, Access Control, Door Entry, Life Safety, Health and Safety, Intruder Alarm, Hikvision, Dahua, Qvis, Galaxy, Texecom, Scantronic, Paxton, PAC, Net2, Wisenet, Morley, Advanced, Kentec, C-tec, Gent, Hojicki, HiFire, Pelco, Menvier, Concept Pro, Haes, Fermax, Videx, ACT, Avigilon, Lenel C-Cure, Notifier, Site Survey, Security System Design, Electrical Engineer, IP Networking, PPM, Preventative maintenance, BAFE, FIA, ECS Card, System Upgrades, Commercial, Residential, Industrial, Site Surveys, Control Panels, System Commissioning

Job Title Dual Fuel Smart Meter Engineer Salary & Benefits Dual Fuel: £39,033 per annum Dual Fuel (3 Phase / CT): £40,117 per annum Dual Fuel (inside M25*): £42,285 per annum Dual Fuel (3 Phase / CT inside M25*): £43,370 per annum Attendance & Safety Bonus: Up to £2,000 per annum *M25 weighting applies to roles based within the M25 boundary. Additional benefits typically include: Company vehicle and fuel card Tools, PPE, and workwear provided Pension scheme Paid holidays Ongoing training and career progression opportunities Role Overview We are seeking experienced Dual Fuel Smart Meter Engineers to carry out the installation, exchange, maintenance, and removal of gas and electricity smart meters in domestic properties. This role requires a strong focus on safety, compliance, and excellent customer service. Engineers with 3 Phase and CT metering experience are particularly encouraged to apply. Key Responsibilities Install, exchange, and remove gas and electricity smart meters in line with industry regulations Carry out 3 Phase and CT meter installations where qualified Complete all work safely, efficiently, and to a high standard Conduct risk assessments and adhere strictly to health & safety procedures Accurately complete job documentation using handheld devices Provide excellent customer service and clear communication with customers Diagnose and resolve metering faults where applicable Ensure compliance with MOP, DCOP, GSOP, and company policies Essential Requirements Valid Dual Fuel qualifications MOCOPA certification Gas Safe registration MET1 and MET2 EUSR registration Full UK driving licence Strong understanding of health & safety regulations Ability to work independently and manage workload effectively Desirable Skills & Experience 3 Phase and CT metering qualifications Previous smart metering experience in domestic properties Strong customer service background Confident using handheld IT systems Working Hours Full-time position Monday to Friday (with some flexibility depending on business needs) Why Join Us? Competitive salary with London weighting Annual attendance and safety bonus Stable workload and long-term opportunities Ongoing training and upskilling Supportive team environment with clear progression routes TPBN1_UKTJ

Mechanical Engineer Location: London Salary: £60,000 - £80,000 (depending on experience) About the Company A leading provider of technical, engineering and energy solutions across the UK, delivering complex projects with precision, innovation, and a strong commitment to safety and sustainability. The organisation operates across critical environments including healthcare, industrial, commercial, and energy sectors. The Role An opportunity has arisen for an experienced Mechanical Engineer to support the delivery of high-value M&E projects. You will be responsible for engineering oversight, project coordination, and ensuring technical compliance across all assigned projects. Working closely with the Project Manager, you will play a key role in solving complex engineering and operational challenges while ensuring projects are delivered efficiently, safely, and profitably. Key Responsibilities Plan and coordinate project activities to ensure efficient and profitable delivery Review designs, drawings, and specifications to ensure technical and regulatory compliance Lead technical checks, submittals, and plant/equipment procurement processes Monitor project progress, sequencing, and quality to meet programme requirements Support commercial activities including variations, subcontract orders, and cost reviews Build and maintain strong relationships with clients, consultants, suppliers, and subcontractors Coordinate with mechanical, electrical, and wider project teams for seamless delivery Oversee installation quality, zero-defects reporting, and commissioning readiness Ensure all activities comply with health & safety standards Prepare project reports and represent the business at key meetings Requirements Degree-qualified in Mechanical Engineering (BSc/BEng preferred) Strong technical experience in Mechanical Engineering project delivery Proven ability to review designs, ensure compliance, and support procurement processes Excellent communication and stakeholder engagement skills Strong organisational and time management abilities Ability to thrive in a fast-paced project environment Collaborative mindset with strong relationship-building skills High attention to detail with a focus on quality and safety Strong problem-solving capabilities What's on Offer Competitive salary of £60,000 - £80,000 Opportunity to work on high-profile, technically complex projects Supportive and collaborative working environment Career progression within a growing organisation Exposure to diverse sectors including healthcare, industrial, and energy For more information please contact Mitchell Rogers on (phone number removed) --- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website

Project Engineer for Power Transformer/Shunt Reactor Location : South London Work Pattern : Full-time Permanent Salary : Competitive We wish to employ a Project Engineer for developing solutions, monitoring the quality compliance, and innovation of the engineering in our products. Responsibilities * Lead technical communications and discussions with customers across the entire business value chain, using your technical skills for tendering, sales, project execution, and after-sales services. * Provide technical support to our sales and project management departments during tender and quotation processes in order to secure orders. * Review and analyze customer technical specifications and coordinate with the factory to prepare technical documentations and drawings according to customer specifications, as well as international and local standards. * Review technical documentation, such as Design Review documents, mechanical drawings, schematic drawings, and test reports. * Consult with the factory to ensure that technical documentation aligns with customer requirements and recommend any necessary revisions. * Ensure that results and deliverables are delivered to customers on time. * Participate in the investigation of technical issues on-site and contribute to the establishment of procedures and corrective actions. * Complete tasks assigned by your leader in a timely manner. * Contribute to continuous improvement of engineering processes and technical standards Profile * Bachelor’s or master’s degree in Electrical Engineering or related discipline. * Minimum of 5 years’ experience in power transformer engineering, electrical equipment engineering, or power systems. * Additional experience with other products such as Shunt Reactors and Special Transformers is desirable. * Strong knowledge of electrical and mechanical aspects of design. * Familiarity with high voltage transformer principles and manufacturing knowledge, as well as relevant technical and manufacturing standards, design and manufacturing processes, equipment and facility status, and installation procedures. * Demonstrated ability to solve complex technical and process problems. * Ability to work independently to complete assignments in a timely manner. * Proficient with Microsoft Office and associated tools. * Willingness to travel as needed. * Strong team player with the ability to work in a worldwide, multicultural technical team. * Fluent in English, both spoken and written. Benefits * Competitive salary * Bonus: up to 10% of the basic salary in accordance with the company’s assessment of individual performance * 25 paid holidays in addition to UK public holidays * Company contribution Pension * Health and Life Insurance allowance * Car Allowance

Marine Engineer (Volvo Penta / Yanmar) £38,000 - £45,000 + Company Bonus + Relocation Assistance + Flexible Working + Excellent Overtime + Training + Progression + Company Benefits Yarmouth - Isle of Wight Are you a Marine Engineer looking to join a reputable company that provides product-specific training and extensive progression opportunities to grow your career alongside an excellent incentive package? This company is based on the River Yar and has been established for over three decades. Providing an extensive range of services to encompass all crafts, they can perform anything from routine servicing to upgrades and complete vessel renovations. This hands-on role will see the successful candidate fault-finding, servicing and repairing a range of Volvo, Mercury, Yanmar, and Honda outboard and inboard marine engines. Other duties will include plumbing works and general electrical repairs. The right candidate for the role will be focused on positive communication and remaining professional in this client-facing role. If you are a Marine Engineer looking to move into a scenic British location and work on a wide variety of components with a range of customers, whilst continuing to develop your skillset and open up progression opportunities, apply today. The Role: Perform varied work on leisure boats from small RIBs and auxiliary engines to large sailing and motor yachts Installation, servicing, repairs, and fault-finding on a range of electrical and plumbing works Installation of mechanical and domestic equipment within new and used boats Diagnostics and troubleshooting, including reactive call-out repairs Formal product-specific training with partners, including Volvo Penta, Honda, and Mercury The Person: Proven Marine Engineering experience Full UK driver's licence Job Reference: BBBH24173A Keywords: Marine, Engineer, Leisure, Vessels, Yarmouth, Isle of Wight, Yanmar, Volvo Penta, Maritime, Engineering, Boats If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Reactive Engineer Fire - Night Shifts Reporting to the Senior Reactive Engineer, the successful Reactive Fire Engineer will be key to joining the 1FM Fire contract and work Permanent Night shifts 4 on 4 off. Focussed on the Reactive works, you will work as part of a team of highly skilled engineers dealing with Fire maintenance. This role would suit someone with previous fire alarm or from an electrical background and will based from our Pirin Court Deport, E16 4TL. When you join our Engineering Team at Telent, you'll be empowered to innovate and drive common solutions, working closely with technical experts who are proud of the impact their work makes. Come join a high-performing team doing complex and critical work. Help build and keep the nation's critical infrastructure connected and protected 24/7. What you'll do: Responsible for fault maintenance and rectification to include alarms, suppression and detection Ensure all efforts are made to complete all works to a high standard (first time fix) Attendance and rectification of daily faults on 1 FM Fire contract Keep the Senior Reactive Engineer updated with any issues faced and progress Practice and promote a safe working environment and culture out on site Assist the Senior Engineers with scheduling and allocation of workWho you are: We are offering an exciting opportunity for an engineer to join our expanding team on the Fire contract. The role requires availability for permanent night shifts on a 4 on, 4 off schedule. Ideal candidates will have a strong background in fault maintenance and rectification or come from an electrical background. If you're ready to take on this challenging role and contribute to a growing team, we'd love to hear from you. Key Requirements: To work 12hr night shifts 6pm - 6am, 4 nights on, 4 nights off. Full UK Driving Licence Understanding Isolations and faults relating to the 1FM Fire contract or have some electrical qualification's Proven experience within reactive Maintenance environment Experience of working alone or in large teams in single or multi-site maintenance and installation activities. What we offer: A career at Telent can span many sectors, roles, technologies and clients giving you the opportunity to develop, learn new skills and make an impact. We are growing and we rely on our committed Team to deliver. We nurture the talent that makes this happen, by our on-going commitment to creating an inclusive culture that respects and values difference, that celebrates diverse ideas. We want everyone to feel they can be themselves and to thrive at work. The additional benefits with this role: 25 shifts holiday and the option to buy or sell days annually Commercial Vehicle Company pension scheme A range of family friendly policies Occupational health support and wellbeing Portal Discounts on Cinema, Restaurants and Shopping with Telent Reward scheme. Learn more about Telent: We're passionate about creating an environment that champions diversity and inclusion, where everyone feels they belong, can be themselves and empowered to reach their full potential. People are at the heart of our business, and we believe that our teams should reflect the diverse experiences and backgrounds of the communities we support

KONE Door Business (KDB) provides comprehensive solutions for automatic entrance systems, from maintenance and repairs to modernization and full replacements. Serving all brands and types – including sliding, revolving, hermetic, high-speed, and industrial doors, as well as shutters, grilles, barriers, and gates – KDB operates in 16 countries with over 1,100 field technicians. KDB is a member of the KONE Group, a global leader in managing the smooth flow of people and goods throughout buildings. Why choose KDB Apprentice program? * Earn while you learn with paid, work‑based training * Learn from experienced engineers on live sites * Work for a global leader in lifts, escalators and doors * Build a career in a growing, future‑focused industry By the end of your apprenticeship, you’ll be a qualified Door engineer, ready to take the next step within KONE. What you’ll do; As a KONE Doors Business Apprentice Engineer, you’ll gain real, practical experience, including: * Hands-on learning: Shadowing and working alongside experienced engineers on-site * Maintenance & installation: Supporting the maintenance, repairs or installation of industrial and pedestrian doors, gates and barriers * Servicing & fault finding: Learning how to diagnose and resolve technical issues * Customer interaction: Working professionally with customers and site contacts No two days are the same — and every day you’ll be learning something new. Practical information * Working Week: Monday - Thursday, 8:00 am - 4:00 pm, Friday 8:00 am - 3:30 pm. * Hours of work: 37 per week. * Duration: 42 months. * Start date: 7th of September 2026. * Level and qualification: L3 Engineering maintenance technician Apprenticeship standard, NOCN NVQ2, DHF Level 2 Award, ADSA - EN16005, ADSA - EN17352 * Salary: starting at £17,534.02 with annual increases subject to performance. Training is work‑based, primarily at customer sites, so you must be prepared to travel. Travel to and from customer sites takes place outside standard working hours. Locations We offer apprenticeships in South London, Bristol, Nottingham, Warrington, Scotland. Who can apply? * Age: 16+ on the apprenticeship start date (7 September 2026) * Education: qualifications in Maths, English, and Science * Skills & qualities we’re looking for: practical and hands-on approach, problem-solving, customer service mindset, good communication skills, positive and proactive attitude, willingness to learn and develop Equal Opportunities KONE is an equal opportunities employer. We welcome applications from all backgrounds (gender, ethnicity, religion, sexual preference, etc.). Proud partners of Women Into Construction and the Women’s Engineering Society. Train’d Up, a national apprenticeship training provider, supports KONE with this recruitment and will conduct the first interview stage

Date Posted: 2026-02-24 Country: United Kingdom Location: Otis Vantage London, 10th Floor, Great West Road, Brentford, TW8 9AG, UK. No one moves people like we do! We move over 2 billion people every day and maintain more than 2.2 million customer units worldwide. You'll find us in some of the world's most iconic buildings, including the Eiffel Tower, Empire State Building, and Burj Khalifa. This is your chance to join an industry that remains strong even during economic challenges-and learn from the best. Ready to get started? What can you expect? At OTIS, we offer one of the most comprehensive apprenticeship schemes in the lift industry. As a Lift Engineer Apprentice, you'll work within a supportive team, combining hands-on experience with classroom-based learning to achieve an NVQ Level 3 qualification-essential for a career as a Lift and Escalator Engineer. Your training will be fully supported by OTIS and our trusted apprenticeship provider. Once qualified as a New Equipment Lift Engineer, you'll install brand-new equipment and manage the installation process from start to finish. You'll work on construction sites throughout the year, moving between locations as projects progress. Who are we looking for? We're seeking aspiring engineers with strong communication skills, a proactive mindset, and a passion for teamwork. You should have: 5 GCSEs (or equivalent) at grade C/Grade 4 or above, including Maths, English, and a STEM subject Minimum age of 18, a valid driving license, and access to a vehicle A willingness to attend and complete all required training throughout the apprenticeship You will require your own laptop Salary Year 1: £16,416 Year 2: £21,888 Year 3: £30,096 Want to learn more? Click Otis Apprenticeship Programme ! At OTIS, we are committed to the ongoing development of every team member. We strongly support career progression and foster a culture that values innovation-because we know our people are the key to our success. If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day. Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio. You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company. When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge. We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs. Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here . TPBN1_UKTJ

Senior BMS Commissioning Engineer – London £65,000 – £80,000 basic + excellent benefits I’m currently working with a leading engineering specialist who is looking to appoint an experienced Senior BMS Commissioning Engineer to support a strong pipeline of projects across London and the South East. This is a fantastic opportunity for a commissioning engineer with solid BMS experience to step into a senior role, working on high-profile projects with a business that values technical expertise and career progression. The Role You’ll be responsible for commissioning BMS systems across a range of projects, ensuring systems are delivered, tested, and fully operational to specification. Key duties include: • Commissioning BMS systems (HVAC, lighting, integrations) across multiple sites, • Testing, validation, and optimisation of system performance, • Fault finding and resolving commissioning issues, • Supporting installation teams and subcontractors with technical expertise, • Ensuring seamless integration with wider building services, • Producing commissioning documentation and progress reports, • Carrying out final inspections and ensuring QA and safety standards are met What We’re Looking For • Proven experience commissioning BMS systems, • Strong working knowledge of Trend, Tridium, Schneider or Siemens, • Experience working within building management systems environments, • Strong fault-finding and problem-solving skills, • Ability to manage workload across multiple projects Certifications: • Trend, Tridium, Delta, Distech or Schneider certification (essential), • BCIA 01, 02 & 03 (minimum), • Electrical safety awareness What’s On Offer • £65,000 – £80,000 basic salary, • Company vehicle (electric or hybrid), • Healthcare cash plan, • Enhanced sickness pay, • Enhanced family leave policies, • Employee Assistance Programme, • Cycle to Work Scheme Why Apply? • Strong pipeline of secured work across London & the South East, • Opportunity to work on technically interesting projects, • Supportive and forward-thinking environment, • Clear progression opportunities within a growing business If you’re a BMS Commissioning Engineer ready for your next step, or a senior engineer looking for a fresh challenge, I’d be keen to speak with you

The Role Our Client is looking for a Chiller Field Service Engineer to join their team based in Dartford. This is a field based role so the successful candidate must be able to commute into London and occasionally attend the offices in Dartford. You will be responsible for the maintenance, service and repair of and AC/VRV products and have a good understanding of BMS controls. The Responsibilities * Service, maintenance and repair of chiller and AC products with minimum direct supervision and within a pre-set timescale * To liaise with customers to ensure work is being carried out to their satisfaction and to identify future potential business * To carry out simple, on site, equipment installation to acceptable standards. Required Experience * Minimum 2 years experience in similar role * Working knowledge of Microsoft Office. Benefits Basic Salary of £35,000 to £45,000 (DOE) * Pension contribution plan * Life Assurance * Company vehicle * Private medical scheme & Eye care vouchers * Company sick pay scheme * Continued professional development, including study leave and financial support for role related qualifications

Commissioning Engineer Location - Staffordshire / Client Sites Are you an Electrical Engineer with commissioning experience? Do you enjoy working on site and seeing projects through to completion? Would you like to be part of a team delivering control systems into critical UK infrastructure? What's in it for you Highly attractive basic salary Living away allowance and paid overtime 28 days holiday plus bank holidays Ongoing training and development 6.5% pension scheme Life assurance (4x annual salary) Private healthcare What will you be doing? Carrying out site acceptance testing and commissioning in line with approved documentation Supporting and delivering factory acceptance testing Supervising installation activities on client sites Producing and managing commissioning files and documentation Marking up drawings and schematics where changes are identified Deploying and verifying configuration files to PLCs, RTUs, SCADA systems and network devices Carrying out fault finding on electrical and electronic systems Managing LOTO procedures and ensuring safe systems of work Where you'll be doing it You'll be joining a well-established engineering business delivering automation and control system projects across energy and other highly regulated sectors. The team works on projects ranging from system modifications through to full new-build installations, both from their Stone office and at client sites across the UK. What you'll need Qualification or strong experience in Electrical Engineering Experience of test and commissioning activities Ability to read and interpret electrical drawings and schematics Experience fault finding on electrical and electronic systems Understanding of communication networks and protocols (fibre, copper, Ethernet, serial) Knowledge of electrical safety and LOTO procedures Experience working with substations, secondary systems or SCADA (desirable) BS7671 18th Edition and C&G 2391 Inspection & Testing Full UK driving licence and willingness to travel We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. TPBN1_UKTJ

We are looking for a Commercial Gas Engineer to carry out servicing and remedial repairs to commercial heating boilers within occupied and void buildings to meet the requirement and expectations of the client in a timely fashion and in compliance with current gas legislation. Benefits as Commercial Gas Engineer: • Company pension, • Health & wellbeing programme, • You will be part of a friendly and busy team, • Excellent training and support with plenty of opportunities for career progression and advancement, • You will be working for a company that recognises individual talent, encourages professional development and rewards success, • 21 days holiday increasing by 1 extra day every 2 years up to a maximum of 25 days, plus statutory days, • Pension scheme - Auto enrolment, • Life Insurance, • Employee Assistance Programme, • Employee Referral Scheme, • Staff Discounts, • Company Vehicle (No private use), • Mobile Phone, • Uniform, • 3-month probationary period Main Responsibilities: • To have detailed knowledge and experience of commercial boilers, associated plant and equipment to manufacturer’s installation, servicing requirements and instructions, • To be proficient in carrying out full commissioning of gas heating boilers and associated controls on completion of installation, reactive or servicing works, • To be able to demonstrate and have a good general fault finding/diagnostic skill and the ability to carry out necessary repairs/replacement of defective parts etc. for both commercial heating and hot water systems., • To be competent of draining down and re-filling of heating system/s in order to remove and replace defective/leaking plant and associated equipment., • To ensure that all work carried out complies with the relevant sections of the ‘Health and Safety at Work Act’ (risk assessment, asbestos awareness etc.), • To carry out on a rota basis (if required) out-of-hours emergency call outs, • Any other duties as reasonably requested Essential Qualifications/Skills we’re looking for in our Commercial Gas Engineer: • Current/Valid Commercial Gas Qualifications – COCN1 or CODNCO1, CIGA1, CDGA1, CORT1, ICPN1 TPCP1A, • A relevant City and Guilds Level 3 Qualification, • Full UK Driving licence If you believe that you have the talent, energy and spirit and are eager to learn, then we want to hear from you