Trabajos rf engineer en EdinburghCrear alertas

(Inside IR 35 only) The Senior RF/ Microwave engineers would be responsible for design, commissioning and test of RF/ Microwave circuitry on complex systems for airborne Radar products. The successful candidate may be required to supervise other less experienced RF / Microwave engineers working on the same project. The role will be based at our customers site in Edinburgh and may allow for hybrid wor... ZIPC1_UKTJ

Senior RF Engineer Edinburgh 12-month contract Paying up to £80p/h (Inside IR35) The Opportunity Our client is seeking a Senior RF Engineer to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft and advanced maritime and airborne surveillance platforms. Key Responsibilities • As an RF/Microwave Engineer, you will:, • Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration, and production support., • Develop high-quality RF PCB and module designs using modern microwave technologies., • Create test prototypes to validate and verify designs., • Carry out detailed design activities from requirements capture through to verification., • Produce and maintain clear technical documentation and reports under configuration management., • Prepare manufacturing data packs and support subcontractors and manufacturing teams., • Work closely with systems, electronics and test engineers to resolve complex integration challenges., • Participate in and support design reviews and lifecycle management activities. Essential Skills & Experience • A degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered., • Microwave PCB materials and RF design techniques, • RF/Microwave subsystem design, • Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB), • EM simulation techniques (2D/3D), e.g. CST, • GaAs/GaN MMIC design and applications, • RF synthesiser design (DDS and PLL technologies), • RF downconverter and digitiser design, • Passive microwave structure design, • Non-linear circuit simulation, • PCB schematic capture tools (e.g. Mentor), • RF laboratory measurements (signal generators, spectrum analysers, vector network analysers), • Requirements capture and technical report writing, • Design for manufacture and cost Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Overview ___ is at the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Learn more ___ Our ___ culture embraces a bold vision of where technology can take us and a passion for tackling challenging problems with industry-first solutions. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers. Keysight’s ADCS team delivers tailored test and measurement solutions to leading Aerospace and Defense customers, with over 20 years of profitable growth. Operating globally, we collaborate closely with customers to design and implement custom hardware/software systems - primarily in radar, satellite, and mission-critical domains. From initial inquiry to final delivery, our multi-disciplinary team engages across engineering, sales, and services to turn complex technical requirements into high-impact solutions that drive customer success and business growth. Due to the sensitive nature of our work, UK security clearance at SC level will be required. Applicants must have lived in the UK for at least 5 years. If you are not a British citizen, then you must have Indefinite Leave to Remain (ILR) or Settled Status. Responsibilities You are a motivated and curious Software Engineer with a background in Electronics Engineering, Computer Science, or a closely related technical discipline. You have a strong foundation in digital and RF systems, and you’re keen to apply these skills to real-world, mission‑critical aerospace and defense challenges. You will be joining our team in Edinburgh, with strong connections to the existing Loveland site and the newly formed Malaga site. You enjoy solving complex technical problems and learning how hardware and software interact within embedded, RF and automated test systems. Whether debugging an FPGA interface, integrating low‑level software, or developing tools to support system‑level verification, you bring a hands‑on, analytical mindset to everything you do. You are enthusiastic about working in a multidisciplinary engineering environment, collaborating with experts in software, electronics, RF interfacing and measurements, and system architecture. You communicate clearly, ask thoughtful questions, and take ownership of your work. Most importantly, you are excited by the opportunity to contribute to the work our team does, while supporting customer programs delivering high‑performance custom test systems. What we offer: • Performance Related Salaries: Starting salaries commensurate with background / skills including relevant experience. Regular salary reviews with merit-based increases., • Flexible Working Hours: Allows you to adjust your work schedule to fit in with your personal life., • Pension Plan, Life Assurance, Healthcare, Employee Assistance Program,, • Holidays: Scotland - 28 days annual holiday plus 5 statutory days Qualifications • Bachelors or Masters Degree in Computer Science, Electronics Engineering or equivalent, • Demonstrated experience of 5+ years in a relevant field, • Highly proficient in at least one of (and familiar with at least two of) C, C++, C#, Python programming languages, • Awareness and/or experience of embedded or real‑time software, • Experience of hardware-software integration, test automation and system verification, • Experience of test instrumentation and associated measurements, • Experience of working with incomplete, ambiguous specifications and tenaciously working through these, • Working knowledge of RF signals and systems, • Use of Windows development environments, • Use of version control tools (specifically Git) Keysight is an Equal Opportunity Employer

___ is at the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Learn more ___ Our ___ culture embraces a bold vision of where technology can take us and a passion for tackling challenging problems with industry-first solutions. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers. Keysight’s ADCS team delivers tailored test and measurement solutions to leading Aerospace and Defense customers, with over 20 years of profitable growth. Operating globally, we collaborate closely with customers to design and implement custom hardware/software systems – primarily in radar, satellite, and mission-critical domains. From initial inquiry to final delivery, our multi-disciplinary team engages across engineering, sales, and services to turn complex technical requirements into high-impact solutions that drive customer success and business growth. Due to the sensitive nature of our work, UK security clearance at SC level will be required. Applicants must have lived in the UK for at least 5 years. If you are not a British citizen, then you must have Indefinite Leave to Remain (ILR) or Settled Status. You are an experienced mechanical engineer who thinks in terms of the full test system, not isolated metalwork. You are enthusiastic about working in a multidisciplinary engineering environment, collaborating with experts in software, electronics, RF interfacing and measurements, and system architecture. You will ultimately be responsible for the mechanical design aspects of complex test systems and fixtures, working in close collaboration with system and electronic engineers to incorporate custom electronics and specialized connectivity into your solutions, as well as working with suppliers to select appropriate materials and manufacturing processes. You will be joining our team in Edinburgh, with strong connections to the existing Loveland site and the newly formed Malaga site. Most importantly, you are excited by the opportunity to contribute to the work our team does, while supporting customer programs delivering high‑performance custom test systems. What we offer • Performance Related Salaries: Starting salaries commensurate with background / skills including relevant experience, • Regular salary reviews with merit-based increases, • Flexible Working Hours: Allowing you to adjust your work schedule to fit in with your personal life, • Pension Plan, Life Assurance, Healthcare, Employee Assistance Program, • Holidays: Scotland – 28 days annual holiday plus 5 statutory days, • Company Activities, Training and Cafeteria Essential: • Bachelors or Masters Degree in Mechanical Engineering (or equivalent), • Demonstrated experience of 5+ years in a relevant field, • Highly proficient in use of CAD tools (preferably Siemens NX), • Working knowledge of electronics PCB/A realization processes, • Experience of working with incomplete, ambiguous specifications and tenaciously working through these, • Ability to obtain UK SC (Security Check) clearance Desirable: • Ability to efficiently switch between activities and adopt roles as required, • Knowledge of project management and business processes, • Practical experience with 3D printers, • Experience in electronic test and measurement The successful applicant will also have: • Excellent verbal and written communication skills, • Analytical skills, • Ability to work collaboratively within a team and directly with customers, • A proven ability for practical (i.e. hands-on) problem-solving, • A methodical and thorough approach to revision control and documentation Keysight is an Equal Opportunity Employer

Contract Test Systems Engineer – Test Hardware 6–12 month contract You will be required to provide evidence of your security clearance. Applications without the appropriate clearance will not be progressed. Your impact Are you interested in developing test systems and test hardware for leading aerospace and defence projects? This contract role focuses on the creation of test equipment and end-to-end test solutions supporting complex, safety-critical systems. You will work within a multi-disciplinary engineering environment, contributing hands-on expertise across the full test lifecycle, from requirements through to validation and support. Key responsibilities • Design and deliver test equipment and end-to-end test solutions, • Specify, select and integrate appropriate test equipment for complex products, • Develop and execute robust hardware test cases aligned to system requirements, • Support testing activities across the full lifecycle, including development, integration, verification and validation, • Collaborate with engineering, systems and programme stakeholders to ensure test solutions meet technical and operational needs, • Identify and resolve test-related issues, supporting root cause analysis and continuous improvement What you will bring • Proven experience creating test systems and test hardware within an engineering environment, • Strong background in hardware testing and structured test case design, • Experience selecting and specifying test equipment for complex products, • Comfortable operating across the full testing lifecycle, • Ability to work independently within a contract delivery model while collaborating effectively with wider teams Essential experience • Demonstrated experience delivering technical solutions within a multi-disciplinary engineering team, • Software integration experience using CVI, C and C++, • Integration experience within an NI TestStand environment, • LF and digital, as well as RF and microwave hardware integration experience, • Experience supporting offsite and overseas test integration activities, • Hands-on experience across the full hardware design process and lifecycle, • Working knowledge of relevant product safety legislation Security clearance This role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). Eligibility for additional National Security Vetting, including Security Check (SC), may be required.

Senior RF Engineer\n\nEdinburgh\n\n12-month contract \n\nPaying up to £80p/h (Inside IR35)\n\nThe Opportunity\n\nOur client is seeking a Senior RF Engineer to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft and advanced maritime and airborne surveillance platforms.\n\nKey Responsibilities\n\nAs an RF/Microwave Engineer, you will:\nSupport the full hardware lifecycle from system concept through design, prototyping, test, verification, integration, and production support.\nDevelop high-quality RF PCB and module designs using modern microwave technologies.\nCreate test prototypes to validate and verify designs.\nCarry out detailed design activities from requirements capture through to verification.\nProduce and maintain clear technical documentation and reports under configuration management.\nPrepare manufacturing data packs and support subcontractors and manufacturing teams.\nWork closely with systems, electronics and test engineers to resolve complex integration challenges.\nParticipate in and support design reviews and lifecycle management activities. \n\nEssential Skills & Experience\n\nA degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered.\nMicrowave PCB materials and RF design techniques\nRF/Microwave subsystem design\nMicrowave design tools (e.g. AWR, ADS, SystemVue, MATLAB)\nEM simulation techniques (2D/3D), e.g. CST\nGaAs/GaN MMIC design and applications\nRF synthesiser design (DDS and PLL technologies)\nRF downconverter and digitiser design\nPassive microwave structure design\nNon-linear circuit simulation\nPCB schematic capture tools (e.g. Mentor)\nRF laboratory measurements (signal generators, spectrum analysers, vector network analysers)\nRequirements capture and technical report writing\nDesign for manufacture and cost \n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

The Senior RF/ Microwave engineers would be responsible for design, commissioning and test of RF/ Microwave circuitry on complex systems for airborne Radar products.The successful candidate may be required to supervise other less experienced RF / Microwave engineers working on the same project.The r

A leading semiconductor company located in the United Kingdom is seeking a Field Systems Applications Engineer to serve as the primary technical interface for aerospace and defense customers. Candidates must possess over 7 years of experience in applications engineering and a relevant degree.

A leading defense technology company in Edinburgh is seeking experienced Senior / Principal RF & Microwave Engineers.The role involves creating RF PCB assemblies and performing circuit design, while collaborating with cross-disciplinary teams.Ideal candidates have over 3 years of RF design experienc

A leading defence technology organisation is looking for a Senior RF Engineer for a 12-month contract in Edinburgh.The successful candidate will support the full hardware lifecycle from design to production, focusing on developing high-quality RF PCB and module designs.Essential skills include exper

Keysight Technologies is seeking a motivated Software Engineer based in Edinburgh, Scotland, specializing in electronics and RF systems. The role involves integrating hardware and software within mission-critical aerospace and defense projects.

A leading company in Aerospace and Defence is seeking Senior/Principal Microwave Engineers at their Edinburgh site.The role involves creating high-quality MMIC designs, performing circuit design, and conducting RF tests.Candidates should possess a degree in Electrical & Electronic Engineering, along

Keysight Technologies SAles Spain SL.

The Senior RF/Microwave Engineer will be responsible for design, commissioning and testing of RF/Microwave circuitry on complex systems for airborne radar products.The successful candidate may supervise less experienced RF/Microwave engineers working on the same project.The role will be based at our

An established engineering consultancy seeks an experienced RF Design Engineer to join their team specializing in complex aerospace radar systems.

Applications Engineering, Field Systems Engineering, or Systems Engineering. We are seeking a Field Systems Applications Engineer to serve as the primary technical interface to aerospace, defense, and emerging autonomy customers. RF, microwave, communications, and navigation subsystems for drones, a

A leading engineering company in the UK seeks a Senior RF/Microwave Engineer to design, commission, and test RF/Microwave circuitry for airborne radar products.Candidates should have a Master's in Electronic Engineering or a related field.The role involves creating designs, documenting deliverables,

A leading technology company is seeking experienced Senior/Principal Microwave Engineers in Edinburgh to join their hardware engineering community.The role involves creating high-quality MMIC designs, conducting RF testing, and mentoring junior engineers.Candidates should have at least 3 years of ex

It is a permanent nightshift position with flexible work patterns.

Candidates should have at least 5 years of relevant experience, a degree in Engineering, and strong RF expertise. A leading aerospace technology company in the United Kingdom is seeking a Ground Station Engineer to manage the maintenance and reliability of antenna assets.

Groupe SII is seeking a Safety Systems Engineer in the United Kingdom to assess and manage safety risks associated with electromagnetic fields and radiation protection.

We’re searching for talented, driven, and experienced Senior / Principal RF & Microwave Engineers to join our expanding hardware engineering community within our world‑class radar division. Create high quality and robust RF PCB Assemblies on multilayer substrates using a mix of active and passiv

Filtronic plc is seeking a Graduate RF Engineer based in Sedgefield, UK. Candidates should have a 2:1 degree in Engineering, Electronics or Physics. You'll develop RF circuit design skills and collaborate with multidisciplinary teams on cutting-edge technology projects.

Quest Global Engineering Limited is seeking a Senior RF/ Microwave Engineer in Edinburgh, offering a contractor position with up to £80 per hour. The role involves designing, commissioning, and testing RF/ Microwave circuitry for airborne Radar products. The successful candidate will also supervise

A leading defence technology organisation is seeking a Senior RF Engineer for a 12-month contract in Edinburgh. Candidates should have a degree in Electrical or Electronic Engineering and experience in microwave design and RF techniques. The role involves supporting the full hardware lifecycle, deve

ECS Resource Group are currently working in partnership with a global managed service provider, assisting them with the search for a Lead Technical Specialist RF Engineer on a contract basis. RF design, wireless engineering, or structured cabling). Familiarity with industry‑specific engineering wo

Filtronic is a leader in high-performance RF technology, creating next‑level solutions for satellites, aerospace and defence. As a Graduate RF Engineer, you’ll have the opportunity to build your career in a fast‑paced, collaborative environment where innovation is part of everyday life. Filtro

Our client is looking for Senior RF Engineers to join a leading defence technology organisation developing cutting‑edge radar systems for modern fighter aircraft, as well as advanced maritime and airborne surveillance platforms. As an RF/Microwave Engineer, you will:. Develop high‑quality RF PCB

A leading advanced engineering organization is seeking an experienced Senior TWT Development Engineer to join their team in Middlesex. This role involves designing high-performance TWT systems, supporting new product introduction, and acting as a technical authority. The ideal candidate will have st

Our client, an established engineering consultancy, require an experienced RF Design Engineer to join their multi-disciplined team working complex aerospace radar systems. The successful candidate may be required to supervise other less experienced RF / Microwave engineers working on the same projec

A leading engineering firm in Edinburgh seeks a Senior / Principal RF & Microwave Engineer to develop advanced radar products. The role involves creating RF PCB assemblies, performing circuit design, and conducting various laboratory tests. Candidates should have a degree in Electrical & Electronic

We’re searching for talented, driven, and experienced Senior / Principal RF & Microwave Engineers to join our expanding hardware engineering community within our world‑class radar division. To excel in this role, you’ll bring a strong command of RF circuit design, microwave engineering, and el

A leading technology firm in the United Kingdom is seeking an experienced Senior Test Engineer to conduct RF testing in Hereford. This role presents a great opportunity to work with innovative RF technology and advance your engineering career.

Work closely with the Antenna Design Authority, Receiver Design Authority and Lead Hardware Specialists while providing RF hardware support to your counterparts within the digital hardware, systems, software, firmware engineering, product support and test engineering team. Are you ready to shape the

Join Our Facilities Team – School Cleaner.Are you someone who takes pride in creating safe, welcoming spaces for others? Do you want to be part of a supportive, professional team that helps schools thrive? If so, we’d love to hear from you.We’re looking for a motivated and reliable Cleaner to

The salary advertised is full time (35 hours per week, 52 weeks per year).Part-time hours / sessional posts will be pro-rated accordingly.This is a 39 week sessional post i.Monday - Thursday, 08:30-15:00.This is an excellent opportunity for someone who wants to progress their Early Years Career at C

Make every day count for someone else and for you.If you’re someone who brings calm, patience and genuine care to everything you do, this could be the role where you thrive.You’ll be supporting adults with learning disabilities to make the most of their day.That might mean helping them get ready

The salary advertised is full time (35 hours per week, 52 weeks per year).Part-time hours / sessional posts will be pro-rated accordingly.This is a 52-week non-sessional post i.Starting and finishing times are flexible.To assist in the provision of a high quality cleaning service within Council buil

Cunningham House in Edinburgh provides safe and supportive accommodation for homeless adults in Edinburgh and we are now looking for Support Workers to join the team.The people who use our services tell us we’ve changed their lives.Our employees tell us they’re supported, enthusiastic and have o

The salary advertised is full time (35 hours per week, 52 weeks per year).Part-time hours / sessional posts will be pro-rated accordingly.This is a 39 week sessional post i.Temporary until 31st March 2027.Wednesday - Thursday, 10:00-15:15.We are looking for an enthusiastic Early Years Support Worker

The salary advertised is full time (35 hours per week, 52 weeks per year).Part-time hours / sessional posts will be pro-rated accordingly.This is a 39 week sessional post i.Wednesday - Thursday, 10:00-15:00.Cockenzie Primary School nursery is looking to recruit an Early Years Support worker to work

Building Cleaning Most Improved Performance Networks Award – 2024.

Salary: £27,257 - £29,850 (pro-rata for part-time and sessional).Hours: 30 per week, 39 weeks sessional.Woodlands School opened in 2008 is a Special School in Currie, Edinburgh, providing personalised education for secondary-aged learners with a wide range of learning disabilities.The school is s

Please note that salary will be pro-rated for part-time and term-time hours.We have an excellent opportunity for a number of cleaning positions available across East Dunbartonshire within our Education and Corporate estate.There are a variety of full time and part time positions, including morning a

Based within Highbank Intermediate Care (move of Premises to Bonnyrigg later this year) your role will be to supervise and participate in the cleaning of designated areas to ensure that they are kept in a clean and hygienic condition.To undertake daily maintenance and the checking of equipment.Order