3d jobs in New York, New YorkCreate job alerts

Prime Staffing is seeking a travel Radiation Therapist for a travel job in Summit, New Jersey. Job Description & Requirements • Specialty: Radiation Therapist, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, • Employment Type: Travel ID: 63056567 Shift: AM 8am-4pm, Monday through FridayStrongly preferred exp. using IMRT, 3D, SRS and SBRT, CBCT and Al Description: Job Function 1: Accurately delivers the planned course of radiation therapy while correctly operating the treatment units with minimal supervision.Maintains visual and audible communication with the patient during treatment. Responsible for performing daily linac and CT QA as well as monthly CT QA. Accurately performs IGRT, SBRT treatment. and portal imaging. Job Function 2: Accurately CT/Simulates patients for radiation therapy following department and site specific protocols. Properly constructs immobilization devices as needed. Understands and is able to use IV contrast for simulation when needed. Accurately performs respiratory gating and ACQ sim. Understands and knows how to use simulation equipment for SBRT treatment. Constructs electron and cerrobend blocks when needed. Is able to properly bill for special devices and simulation procedure. Accurately completes the procedure verification assessment in MOSAIQ prior to the start of simulation. Job Function 3: LEAD CT THERAPIST Accurately CT/Simulates patients as in Job Function2. Is responsible for training all therapists in CT/Simulation which includes AcQ simulation, respiratory gating, CT and laplaser QA, mould room duties and SBRT simulation. Also makes sure all necessary forms required for completion by physicians are downloaded and ready for physician completion. Job Function 4: Maintains and verifies all aspects of MOSAIQ for daily treatment management,i. E. treatment calendar, patients schedules, prescription, photos, DRR's and portal imaging. Verifies all physics and physician treatment planning parameters. Attends weekly chart rounds and has the ability to access McKesson for inpatient transportation. Is able to send and review information as needed in the Quality Check List. Job Function 5: Follows all department policies and procedures and adheres to the department dress code. Follows all safety standards. Utilizes correct body mechanics procedure and equipment such as slide board and ceiling lift. Practices the ALARA principle for radiation protection for patients and staff. Responsible of current knowledge of all emergency procedures for the department as well as each piece of treatment equipment. Reports any malfunctions of equipment in relation to patients treatment to physician, lead therapist,manager,and physicist. Job Function 6: Is able to safely operate CT on rails for IGRT delivery and can accurately perform IGRT on all sites. Understands how to electronically create IGRT document and shift tracking assessment in MOSAIQ. Job Function 7: Maintains records of daily treatment and other records as required. Checks prescription, set-up instructions, and patient information daily in the chart and in the record and verify system. Accurately records the daily treatment plan monitor units in the chart for each treatment. Recognizes any changes in a treatment plan and consequently implements and documents the change. Schedule Notes:8am-4pm, Monday through FridayStrongly preferred exp. using IMRT, 3D, SRS and SBRT, CBCT and Align RT.Skills: Successful completion of an approved course in Radiation TherapyARRT certified and registeredEducation: Successful completion of an approved course in Radiation TherapyJob Category: Clinical - Allied - Travel Guaranteed Hours: 37.50 Contract Weeks:89 Prime Staffing Job ID #36633908. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Allied / Tech:Radiation Therapist,07:00:00-19:00:00 About Prime Staffing At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates. Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Our experienced team takes the time to get to know both our clients and candidates, their needs, and preferences, to ensure that each placement is a success. We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Prime Staffing is seeking a travel Radiation Therapist for a travel job in Summit, New Jersey. Job Description & Requirements • Specialty: Radiation Therapist, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, • Employment Type: Travel ID: 63056568 Shift: AM 8am-4pm, Monday through FridayStrongly preferred exp. using IMRT, 3D, SRS and SBRT, CBCT and Al Description: Job Function 1: Accurately delivers the planned course of radiation therapy while correctly operating the treatment units with minimal supervision.Maintains visual and audible communication with the patient during treatment. Responsible for performing daily linac and CT QA as well as monthly CT QA. Accurately performs IGRT, SBRT treatment. and portal imaging. Job Function 2: Accurately CT/Simulates patients for radiation therapy following department and site specific protocols. Properly constructs immobilization devices as needed. Understands and is able to use IV contrast for simulation when needed. Accurately performs respiratory gating and ACQ sim. Understands and knows how to use simulation equipment for SBRT treatment. Constructs electron and cerrobend blocks when needed. Is able to properly bill for special devices and simulation procedure. Accurately completes the procedure verification assessment in MOSAIQ prior to the start of simulation. Job Function 3: LEAD CT THERAPIST Accurately CT/Simulates patients as in Job Function2. Is responsible for training all therapists in CT/Simulation which includes AcQ simulation, respiratory gating, CT and laplaser QA, mould room duties and SBRT simulation. Also makes sure all necessary forms required for completion by physicians are downloaded and ready for physician completion. Job Function 4: Maintains and verifies all aspects of MOSAIQ for daily treatment management,i. E. treatment calendar, patients schedules, prescription, photos, DRR's and portal imaging. Verifies all physics and physician treatment planning parameters. Attends weekly chart rounds and has the ability to access McKesson for inpatient transportation. Is able to send and review information as needed in the Quality Check List. Job Function 5: Follows all department policies and procedures and adheres to the department dress code. Follows all safety standards. Utilizes correct body mechanics procedure and equipment such as slide board and ceiling lift. Practices the ALARA principle for radiation protection for patients and staff. Responsible of current knowledge of all emergency procedures for the department as well as each piece of treatment equipment. Reports any malfunctions of equipment in relation to patients treatment to physician, lead therapist,manager,and physicist. Job Function 6: Is able to safely operate CT on rails for IGRT delivery and can accurately perform IGRT on all sites. Understands how to electronically create IGRT document and shift tracking assessment in MOSAIQ. Job Function 7: Maintains records of daily treatment and other records as required. Checks prescription, set-up instructions, and patient information daily in the chart and in the record and verify system. Accurately records the daily treatment plan monitor units in the chart for each treatment. Recognizes any changes in a treatment plan and consequently implements and documents the change. Schedule Notes:8am-4pm, Monday through FridayStrongly preferred exp. using IMRT, 3D, SRS and SBRT, CBCT and Align RT.Skills: Successful completion of an approved course in Radiation TherapyARRT certified and registeredEducation: Successful completion of an approved course in Radiation TherapyJob Category: Clinical - Allied - Travel Guaranteed Hours: 37.50 Contract Weeks:89 Prime Staffing Job ID #36633909. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Allied / Tech:Radiation Therapist,07:00:00-19:00:00 About Prime Staffing At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates. Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Our experienced team takes the time to get to know both our clients and candidates, their needs, and preferences, to ensure that each placement is a success. We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Medical Solutions Direct Hire is seeking a Outpatient Mammography Technologist for a job in Roselle Park, New Jersey. Job Description & Requirements • Specialty: Mammography Technologist, • Discipline: Allied Health Professional, • Duration: Ongoing, • 40 hours per week, • Shift: 8 hours, days, evenings, • Employment Type: Staff Mammography Technologist – Facilities Role Locations: Elizabeth, NJ Schedule: Various, full-time Role Overview: Seeking an experienced Mammography Technologist to perform high-quality 3D mammography imaging, ensure patient comfort and safety, and collaborate with radiologists and clinical staff across multiple NJ facilities. Requirements: • ARRT (R)(M) certification, • NJ State License and current CPR certification, • 2+ years recent diagnostic 3D mammography experience Benefits: • Competitive pay starting at $82,380/year, • Full benefits: Medical, Dental, Vision, Life, 401(k), Profit Sharing, PTO, • Sign-on bonus for eligible new hires, • Career growth opportunities Apply today to join a stable, supportive imaging team! Medical Solutions Direct Hire Job ID #946984. About Medical Solutions Direct Hire At Medical Solutions, we’re people who care, helping people who care. No matter how you look at it, there’s a whole lot of care going on in our world and that’s just the way we like it. What do we do? Medical Solutions is one of the nation’s largest providers of total workforce solutions in the healthcare industry, connecting nurses and allied health clinicians with hospitals and healthcare systems across the country and around the corner. Through our family of brands, we also serve a segment of clients outside of the healthcare space. And we’re the very best at what we do. You’ll love our culture that’s filled with heart and soul. As a company and employer, we’re sincerely and unabashedly us. We lead as humans first and believe the unique qualities of each team member make us better together. We share a purpose for helping others and the drive to make a difference. And we offer endless opportunities for personal and professional growth, throughout your career. At Medical Solutions, you’ll find a great place to work and a career home. We’ve received Best Places to Work awards, landed top industry awards, and received accolades for the impact we’ve made in business and within our community. But the only way to really get to know us, is to join us. We think you’ll fit right in.

Licensed Land Surveyor US-NY-Mineola Job ID: 2024-2971 of Openings: 1 Category: GIS/Surveyor LiRo GIS and Survey, PC, 235 East Jericho Turnpike, Mineola NY Overview We currently have a need for a Licensed Land Surveyor for Mineola, NY. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E and Construction Management firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston, Needham, MA and Edison, NJ. Responsibilities • Plan, coordinate and schedule project work tasks for multiple projects, • Monitor and oversee project budgets, • Establish project team(s), • Administer and oversee survey manpower and activities, • Communicate and build client relationships Qualifications • Minimum of 5 - 10 years’ experience as a Land Surveyor, • License in New York is required; New Jersey license is preferred, • Proficient in Carlson 2018 with AutoCAD, Civil 3D and GIS, • Superior communication skills, • Ability to examine and interpret civil, architectural and structural drawings, • Ability to examine boundary evidence survey resolutions, • Construction Layout computations and calculations We are committed to your success, and we invest in your growth and development to unlock your full potential. • Competitive Total Compensation Package, • Employee- Only Stock Purchase Plan, • Mentoring programs, • Continuing Education Program, • Employee referral bonus, • Volunteer/Industry association opportunities Our Culture: • We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. We offer a comprehensive benefits package and a positive work environment -Compensation: Minimum: $120,000: Maximum: $150,000 The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates’ qualifications and location. -- The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 120000-150000 Yearly Salary PI44d5486d0924-37820-34907079

Job Description We are seeking a highly skilled, organized, and dependable Lead CNC & Digital Fabrication Specialist to provide technical leadership across CNC machining, machine setup, and digital fabrication production for fast-paced, creative projects. Reporting functionally to the Digital Fabrication Department Head or assigned Production leadership, and working closely with Project Managers, Production Managers, and Technical Designers, this position drives machine-based production across the project lifecycle. This role is responsible for CNC programming, machine setup, production support, quality control, troubleshooting, and mentoring junior team members. The ideal candidate is highly capable in Rhino and Fusion 360 CAM, resourceful, proactive, and comfortable working in an environment where priorities can shift quickly, with the ability to take ownership of complex work, communicate clearly, and deliver accurate, high-quality results. This role is intended for a senior technical specialist with the potential to develop into broader department leadership as the Digital Fabrication Department continues to grow. Salary Range: $35 – $45 / hour (Dependent on experience) PRIMARY RESPONSIBILITIES CNC Programming, Machining & Digital Fabrication • Program, set up, and support CNC production using Fusion 360 CAM and related shop workflows., • Translate Rhino models, drawings, and project documentation into accurate, production-ready machine workflows., • Develop and optimize CNC machining strategies for complex, 2-sided, sculptural, and nested sheet-good workflows., • Select appropriate CNC tooling, feeds, speeds, fixturing, and machining parameters based on part and machine requirements., • Select appropriate digital fabrication strategies, materials, settings, and setup methods across related equipment., • Operate Homag, Weeke, laser, 3D printing, thermoforming, and related equipment in accordance with shop standards., • Monitor machine performance and troubleshoot programming, tooling, or machine-related issues., • Inspect digitally fabricated components for accuracy, finish quality, and alignment with design intent. Workflow Coordination & Cross-Department Collaboration • Collaborate with Project/Production Managers, and Technical Designers to align scope, schedule, and shop capacity., • Adapt design-provided 3D models for DFAB production through review, flattening, batching, labeling, and Design coordination., • Develop fabrication means, methods, and production strategies for complex builds., • Execute assigned machine queues while supporting planning around staffing, training, and production capacity., • Communicate production status and flag capacity, schedule, tooling, machine, material, or consumable concerns., • Participate in pre-production planning and post-project reviews to support execution and improve workflows., • Support peak-period AM/PM shift coverage, extended hours, evenings, or weekends when workload requires., • Collaborate across departments and take on tasks as needed to support overall shop capacity. Standards, Organization & Continuous Improvement • Maintain organized CAM files, machine settings, handoff notes, reports, and production documentation., • Support machine incident reports, production reports, and project-based material usage tracking., • Support development of department standards, SOPs, training materials, and documentation systems., • Reinforce standards across programming, setup, file organization, and production handoffs., • Coordinate material workflows, including sheet staging, nesting priorities, and machine readiness., • Monitor tooling, materials, and consumables, proactively flagging shortages and recurring issues., • Proactively identify bottlenecks, documentation gaps, and opportunities for workflow improvement., • Utilize CutRite and material management systems to support workflow optimization and material efficiency., • Support preventive maintenance and upkeep of CNC and related equipment, ensuring machines remain production-ready., • Stay current with relevant digital fabrication tools, materials, and production methods., • Maintain a clean, organized, and safe work environment, following all shop safety protocols., • Mentor, train, support, and onboard CNC Operators, Digital Fabrication Technicians, and freelance/seasonal support. ABOUT US TWOSEVEN is a multidisciplinary design/build firm located in Brooklyn, New York. We specialize in creating store window displays, retail interiors, showrooms, and event activations for high-profile fashion, luxury, and lifestyle brands. TWOSEVEN offers a wide range of services - combining a design studio, fabrication workshop, and installation team, all under one roof. We devote ourselves to excellent craftsmanship, high-quality design, and attention to detail. Join our creative, friendly, and dynamic workplace. TWOSEVEN is an Equal Opportunity Employer. Requirements • High school diploma or equivalent; background in industrial design, architecture, or related field preferred., • 4+ years of CNC machining and CAM programming experience in fast-paced creative production workshops., • Demonstrated proficiency in Fusion 360 CAM and Rhino; Grasshopper, WoodWop, WoodCAD|CAM, or similar software a plus., • Ability to execute complex machining operations, including multi-operation setups and 2-sided machining., • Ability to translate 3D models, shop drawings, and technical documentation into production-ready machine workflows., • Strong understanding of materials, tooling, feeds/speeds, fixturing, and fabrication methods., • Experience working with wood, MDF, plywood, plastics, foams, acrylics, laminates, and specialty sheet goods., • Experience with Homag/Weeke systems, CutRite, WoodWop, WoodCAD|CAM, or Intellistore preferred., • Hands-on experience with laser cutting and 3D printing workflows, including file prep, setup, and troubleshooting., • Working knowledge of thermoforming, plexi-polishing, fabrication, assembly, and material preparation methods., • Working knowledge of MS Office suite and Windows-based workflows, especially Excel., • Strong communication, organization, problem-solving, and leadership maturity when working cross-functionally., • Calm, collaborative, detail-oriented, and adaptable in fast-paced production environments., • Must be professional, punctual, and dependable, with a strong sense of accountability., • Must be available to work extended hours, evenings, and weekends during peak fabrication periods., • Physically capable of lifting and handling oversized sheet goods., • Forklift / hi-lo experience or willingness to be trained and authorized preferred., • Must be eligible to work in the U.S. Benefits • Employee Health Insurance. Three plans are available after a two-month waiting period, with TwoSeven covering from 55 to 70% of the premium., • (401k) After one year of employment, up to 4% of the salary matched., • Profit-sharing of up to 5% of salary after 1 year of employment., • Up to 80 hours PTO per year., • Up to 40 hours of sick leave per year., • 6 Paid holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day)., • Life, short-term, and long-term insurance., • Paid Family Leave.

Job Description Prominent Metropolitan HVAC manufacturer’s representative company is seeking Entry-Level Estimators to join our team. The ideal candidate will be a quick learner, have knowledge and ease of navigating computers & software, showing attention to detail, work well with peers and take direction from management. We will offer training to a suitable non-experienced candidate who demonstrates the ability of being able to handle the work. Estimator Responsibilities: • Read and understand mechanical drawings, • Use manufacturers software, • Complete takeoffs from mechanical drawings, • Provide detailed quotes based on the takeoffs, • Price up all products represented by ADE, • Prepare detailed proposals, • Performs other related duties as assigned by management. AutoCAD or 3D Modeling Program experience not required Preferred Background • Experience in the construction industry, • Computer skills preferred: Takeoff Software (PlanSwift, On-Screen Takeoff, etc...), Microsoft Excel knowledge, Enterprise Resource Planning Software (Microsoft Navision), • Other skills required: Organization, Ability to learn, High attention to detail Salary & Benefits Overview • Opportunity for advancement, • Excellent benefits program including medical, dental, vision, 401k (up to 4% match), • Vacation, Paid Holidays and PTO, • Product training and support provided – in house and factory training, • Salary range based on experience To learn more about our company please visit our website at www.adehvac.com Company DescriptionThe Premier Manufacturers Representative of HVAC Products. For over 50 years, our reputation of excellence in the contracting, engineering and architectural communities, enables us to satisfy and exceed all of your HVAC needs. Air distribution, fan applications, air handling units, fan coils, VFDs, electric heat, humidification, and so much more. We have the knowledge and products to solve your HVAC problems.The Premier Manufacturers Representative of HVAC Products. For over 50 years, our reputation of excellence in the contracting, engineering and architectural communities, enables us to satisfy and exceed all of your HVAC needs. Air distribution, fan applications, air handling units, fan coils, VFDs, electric heat, humidification, and so much more. We have the knowledge and products to solve your HVAC problems.

Position: Senior Land Surveyor Location: San Luis Obispo, California Duration: Contract Pay Range: $120K - $155K/yr Job ID: 176899 Job Overview: We are seeking a highly skilled and experienced Senior Land Surveyor to join our team. The ideal candidate will be responsible for overseeing and conducting land surveying activities, ensuring accuracy, and maintaining compliance with all relevant regulations. This role requires strong technical expertise, leadership abilities, and a commitment to delivering high-quality results. Responsibilities: Plan, coordinate, and execute land surveying projects, including boundary, topographic, and construction surveys. Supervise and mentor junior surveyors and field crews to ensure project objectives are met. Prepare and review survey maps, plats, and legal descriptions. Utilize advanced surveying equipment and software to collect and analyze data. Ensure compliance with local, state, and federal regulations and standards. Collaborate with engineers, architects, and other stakeholders to support project requirements. Maintain accurate records and documentation of survey activities. Qualifications: Professional Land Surveyor (PLS) license in the state of California. Minimum of 5 years of experience in land surveying, with at least 2 years in a senior or supervisory role. Proficiency in using surveying equipment such as GPS, total stations, and data collectors. Strong knowledge of AutoCAD, Civil 3D, and other relevant software. Excellent analytical, problem-solving, and organizational skills. Strong communication and leadership abilities. Ability to work independently and as part of a team in a fast-paced environment. About PTR Global: PTR Global is a leading provider of information technology and workforce solutions. PTR Global has become one of the largest providers in its industry, with over 5000 professionals providing services across the U.S. and Canada. For more information visit www.ptrglobal.com At PTR Global, we understand the importance of your privacy and security. We NEVER ASK job applicants to: Pay any fee to be considered for, submitted to, or selected for any opportunity. Purchase any product, service, or gift cards from us or for us as part of an application, interview, or selection process. Provide sensitive financial information such as credit card numbers or banking information. Successfully placed or hired candidates would only be asked for banking details after accepting an offer from us during our official onboarding processes as part of payroll setup. Pay Range: $120K - $155K/yr The specific compensation for this position will be determined by several factors, including the scope, complexity, and location of the role, as well as the cost of labor in the market; the skills, education, training, credentials, and experience of the candidate; and other conditions of employment. Our full-time consultants have access to benefits, including medical, dental, vision, and 401K contributions, as well as PTO, sick leave, and other benefits mandated by applicable state or localities where you reside or work. If you receive a suspicious message, email, or phone call claiming to be from PTR Global do not respond or click on any links. Instead, contact us directly at +1 214-740-2424. To report any concerns, please email us at legal@pinnacle1.com #LI-SM4

Company Logo Overview Intermediate Field Surveyor - Geotechnical Instrumentation & Monitoring Location: Mississauga, Ontario (based in the field) Reports To: Area Manager / Field Operations Lead We are seeking an experienced and motivated Intermediate Field Surveyor with a strong background in geotechnical instrumentation and monitoring to join our growing team in Ontario. The successful candidate will be responsible for executing field survey activities, ensuring accurate installation, calibration, and maintenance of geotechnical instrumentation, and providing high-quality monitoring data to support infrastructure, construction, and environmental projects. This position involves both field and office work, with regular travel to various project sites across Ontario. This role will report to our office is Mississauga, Ontario. Responsibilities Conduct precise topographic, geotechnical, and construction surveys in support of instrumentation and monitoring programs. Install, calibrate, and maintain geotechnical instruments such as piezometers, inclinometers, extensometers, strain gauges, and data loggers. Perform automated and manual monitoring, data collection, and validation using industry-standard software and instruments. Support the design and layout of monitoring networks and survey control systems. Collaborate with engineers, project managers, and data analysts to ensure data integrity and timely reporting. Adhere to safety and quality standards, ensuring compliance with internal procedures and regulatory requirements. Document field activities through detailed notes, survey logs, and photographs. Assist in training and mentoring junior field staff. Qualifications Diploma or Degree in Geomatics, Civil Engineering Technology, Surveying, or a related discipline. 3–5 years of field survey experience, preferably in geotechnical or civil engineering environments. Demonstrated experience with instrumentation and monitoring systems (e.g., vibrating wire, MEMS sensors, total stations, GNSS, dataloggers). Proficiency with surveying equipment and software (Trimble, Leica, AutoCAD Civil 3D, GIS tools). Strong understanding of survey control, coordinate systems, and data accuracy standards. Valid Ontario driver’s license and willingness to travel to various sites across the province. Excellent communication, documentation, and problem-solving skills. Commitment to health, safety, and environmental standards. Assets (Preferred): Experience with remote or automated monitoring systems. Familiarity with construction monitoring, slope stability, or tunneling projects. Professional accreditation (e.g., OLS, CET, or pending certification) is an asset. Additional Information What We Offer: Competitive compensation and comprehensive benefits package. Opportunities for professional development and technical training. Dynamic and collaborative work environment with a focus on innovation. Exposure to diverse, large-scale geotechnical and infrastructure projects. Additional Requirements: Candidates must be authorized to work in Canada. Candidates should be willing to travel temporarily within Ontario and to the province of Quebec to perform tasks related to the company’s projects. Compensation and/or reimbursements for the travel will be provided in accordance with company policy. This post is for an existing vacancy. Salary ranges from CAD $26-$40 per our, DOE Geo-Instruments is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply. Equal Employment Opportunity

Position: Water Resources Engineer III-IV Location: San Luis Obispo, California Salary Range: $115,000- $125,000 Duration: Perm Placement Job ID: 176902 Job Overview: We are seeking a talented and experienced Water Resources Engineer III-IV to join our team in San Luis Obispo, California. This role involves water resources planning and design, with a focus on delivering technical solutions for water supply, water quality, master planning, infrastructure modeling, utility design, and treatment systems. The ideal candidate will have a minimum of seven years of progressively responsible experience and a strong background in civil and water resource engineering. This position offers opportunities for professional growth, including project management and client-facing responsibilities. Responsibilities: Prepare engineering reports, plans, specifications, and estimates (PS&E) for water resources and civil engineering projects. Design municipal public works infrastructure projects related to water, wastewater, stormwater, and recycled water. Conduct water and wastewater master planning and hydraulic modeling. Perform feasibility studies and designs for recycled water systems. Design water distribution systems, pump stations, sewer collection systems, and lift stations. Develop water and wastewater treatment system designs. Support civil/water/wastewater design for private and commercial projects, including wineries. Coordinate with regulatory agencies and support permitting processes. Assist with project management functions, including scope, budget, and scheduling control for complex projects. Contribute to business development efforts, including proposal and SOQ development, interview preparation, and representing the firm in industry and community settings. Qualifications: Bachelor's degree in Civil Engineering or a related field. Professional registration (California license preferred). Minimum of seven years of qualifying experience. Proficiency in AutoCAD / Civil 3D. Strong understanding of relevant standards and regulatory requirements. Proficiency in water and sewer modeling programs such as WaterCAD, InfoSWMM, and Aquanuity software. Experience with GIS databases related to public agency utility systems, utility master planning, and preparation of utility Atlas maps (preferred). Experience with ArcGIS Pro (preferred). About PTR Global: PTR Global is a leading provider of information technology and workforce solutions. PTR Global has become one of the largest providers in its industry, with over 5000 professionals providing services across the U.S. and Canada. For more information visit www.ptrglobal.com At PTR Global, we understand the importance of your privacy and security. We NEVER ASK job applicants to: Pay any fee to be considered for, submitted to, or selected for any opportunity. Purchase any product, service, or gift cards from us or for us as part of an application, interview, or selection process. Provide sensitive financial information such as credit card numbers or banking information. Successfully placed or hired candidates would only be asked for banking details after accepting an offer from us during our official onboarding processes as part of payroll setup. Pay Range: $115,000 - $125,000 The specific compensation for this position will be determined by several factors, including the scope, complexity, and location of the role, as well as the cost of labor in the market; the skills, education, training, credentials, and experience of the candidate; and other conditions of employment. Our full-time consultants have access to benefits, including medical, dental, vision, and 401K contributions, as well as PTO, sick leave, and other benefits mandated by applicable state or localities where you reside or work. If you receive a suspicious message, email, or phone call claiming to be from PTR Global do not respond or click on any links. Instead, contact us directly at +1 214-740-2424. To report any concerns, please email us at legal@pinnacle1.com #LI-SM4

Remote AutoCAD designer 80-100K Fully remote W2 employee Prepare and manage material estimates, CAD standards, sheet sets, and bill of materials (BOM). either 2D or 3D experience either manufacturing, aerospace or automotive experience salary: 80-100K direct hire with 401k, sick days, vacation days, holidays pay, PTO with health, dental, life and vision insurance Minimum four (4) years AutoCAD design experience high school diploma or college degree AutoCAD design experience

Requisition Number: 27455 Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $122,609.00 - $165,006.40 Security Clearance: Top Secret Level of Experience: Mid This opportunity resides with Global Security (GS). Mission Technologies’ Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination—not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems—from small watercraft to submarines, surface combatants and aircraft carriers—HII ensures a high state of readiness. HII supports the Department of Energy’s national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients’ toughest nuclear and environmental challenges. Meet HII’s Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense – the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that’s right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: https://vimeo.com/732533072 Summary The Model‑Based Systems Engineer (MBSE) plays a central role in developing and maintaining the authoritative Systems Modeling Language (SysML) system model that supports the Joint Integrated Test and Training Center – Navy (JITTC‑N) flight simulation environment. Using Cameo Systems Modeler, the MBSE ensures architectural accuracy, maintains the system’s “single source of truth,” and translates operational needs into clear, actionable models. The role also develops supporting 2D/3D technical documentation—such as network diagrams, rack elevations, and wiring schematics—to support procurement, installation, integration, and maintenance activities. Impact Ensures architectural consistency across a complex Information Technology (IT) ecosystem integrating engineering, networking, cybersecurity, audio/visual (A/V), and simulation components. Strengthens governance and risk management by delivering model‑based impact assessments that support the Configuration Control Board (CCB). Provides accurate, stakeholder‑ready system artifacts that directly enable mission‑critical training and testing for U.S. Air Force and Department of Defense (DoD) operations. Key Responsibilities System Model Development: Build, manage, and maintain the authoritative SysML model using Cameo Systems Modeler, representing both current and planned system states. Requirements Management: Translate stakeholder needs into formal, verifiable system and subsystem requirements within the model. Architectural Modeling & Analysis: Model system structure, behavior, interfaces, and interactions; generate formal assessments to support CCB decision‑making. Technical Drafting & Visualization: Create and maintain 2D/3D technical materials—including network diagrams, rack elevations, wiring drawings, and facility/component layouts—using Microsoft Visio and AutoCAD. Stakeholder Documentation: Produce tailored architectural views, reports, matrices, and specifications to support program management, engineering teams, cybersecurity, and Test & Evaluation (T&E) stakeholders. Success in this Position Requires Initiative and strong work ethic with the ability to work independently, collaborate with teams, and solve complex problems in a development and prototyping environment. Strong analytical thinking to identify issues, interpret data, and develop innovative solutions. Clear, concise communication skills to document, present, and explain technical concepts to diverse audiences. Effective collaboration and schedule awareness to support contract milestones and program success. What you must have Education & Experience Candidates must meet one of the following: Bachelor’s degree in a related field and 9 years of relevant experience Master’s degree in a related field and 7 years of relevant experience Doctorate (Ph.D.) or Juris Doctor (J.D.) in a related field and 4 years of relevant experience High school diploma or equivalent and 13 years of relevant experience Technical Knowledge (Knowledge, Skills & Abilities) Hands‑on proficiency with SysML and Cameo Systems Modeler. Ability to build, manage, and maintain complex system models end‑to‑end. Experience producing and maintaining 2D/3D technical drawings using Microsoft Visio and AutoCAD. Ability to generate architecture products for diverse engineering and program stakeholders. Understanding of network architecture (TCP/IP, routing, switching), server infrastructure, virtualization, and cybersecurity boundaries. Credentials Must be a U.S. Citizen. Must have held an active Department of Defense (DoD) Top Secret clearance within the last 24 months. Ability to obtain and maintain DoD TS/SCI and applicable Special Access Program (SAP) / Special Access Required (SAR) clearances. Preferred Qualifications Experience with flight simulation systems, Live‑Virtual‑Constructive (LVC) environments, or related DoD systems. Familiarity with the Department of Defense Architecture Framework (DoDAF) or Unified Architecture Framework (UAF). Exposure to cybersecurity principles and the Risk Management Framework (RMF). MBSE‑related certification such as the OMG‑Certified Systems Modeling Professional (OCSMP). Experience scripting within Cameo to automate model validation or report generation. Experience supporting integration labs, test events, or complex system deployments. Physical Requirements May require working in an office, industrial, shipboard, or laboratory environment. Capable of climbing ladders and tolerating confined spaces and extreme temperature variances. HII is more than a job - it’s an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. Why HII We build the world’s most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America’s top large company employers, we are a values and ethics driven organization that puts people’s safety and well-being first. Regardless of your role or where you serve, at HII, you’ll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to buildyourcareer@hii-co.com and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Title: Echocardiographer Location: Paramus, NJ - Locations Available Across US Duration: 23 Weeks Contract (Possibility of extension) Shift: 8:00 AM - 4:30 PM. 5x 8hr shifts. No weekends, No holidays, No On call. Pay Rate: $50/HOUR-$55/HOUR Non-Taxable Per Diem is provided to the qualified candidate living more than 50 miles from the facility Performs echocardiograms including 2-D M-Mode, color flow imaging, stress echo, TEE, and doppler studies. Has knowledge of Strain and 3D echocardiography. Requirements: • High School Diploma or GED required, • Graduate of CAAHEP or ABHES Cardiovascular Technology Program preferred. • Credentialing Through ARDMS or CCI. • BLS-AHA.

Doctor of Medicine | Obstetrics and Gynecology Location: New York, NY Employer: CompHealth Pay: $275,000 to $315,000 per year Start Date: ASAP About the Position New York, NY, offers physicians an unparalleled professional landscape with world-renowned hospitals, cutting-edge medical research institutions, and diverse patient populations. The city's fast-paced environment fosters continuous learning, collaboration with top-tier medical professionals, and access to the latest advancements in healthcare. With a high demand for medical services across various specialties, physicians can build thriving careers while making a significant impact on public health. Additionally, New York's cultural vibrancy, rich amenities, and endless networking opportunities make it an exciting and fulfilling place to live and work. CompHealth has relationships with hospitals across the country and often know about jobs before they are advertised. Contact Seth Fredericks at or (203) 663-9398 to learn more about this opportunity. Negotiable schedule options available Accepting residents and new physicians Academic medical center affiliation with teaching opportunities DaVinci robotic surgery capabilities available High-risk obstetrics with onsite MFM physician support Advanced ultrasound technology including 3D and 4D imaging Minimally invasive surgery focus Comprehensive prenatal and OB-GYN services Our services are free for you We help negotiate your salary and contract We coordinate interviews and help with licenses Specialized recruiters match your career preferences Experienced support teams take care of every detail Ranges shown should be used as an estimate and are affected by many factors including the critical need of the position, your overall experience and qualifications, and other considerations. Rates shown are all-inclusive and combine an hourly base pay with other potential earnings like overtime, call, and holiday pay. Please contact your consultant for details.

Job Title : AR Developer Location : Remote Duration : 10+ Months Job Summary AR Development (Primary) Design, develop, and deploy augmented reality training experiences using platforms such as PTC Vuforia, Scope AR, Microsoft Dynamics 365 Guides, or equivalent AR authoring tools. Instructional Design & Learning Content Apply adult learning principles and instructional design models (e.g., ADDIE, SAM) to ensure all AR and digital learning content is pedagogically sound and learner centered. Develop supporting learning materials — including eLearning modules, facilitator guides, job aids, and assessments — that complement and reinforce AR experiences. Essential Requirements Bachelor’s degree in Instructional Technology, Computer Science, Interactive Media, or related field with 5+ years of experience, or Master’s degree with 3+ years of experience. Experience developing augmented reality/mixed reality training content using commercial AR authoring platforms. Proficiency with 3D content and assets using Unity, Blender, or similar 3D modeling/animation tools. Knowledge of instructional design methodologies and adult learning principles.

Lead Mechanical Engineer Mission Out at sea, there’s no margin for failure. Naval systems must operate reliably in extreme conditions, constant vibration, high heat, saltwater corrosion, and continuous operational demand. The hardware that supports these missions must be engineered not just to function, but to endure. At WR, we design and deliver the mechanical and electrical systems that protect, support, and enable critical naval technologies. From concept through deployment, our work ensures that mission-critical equipment performs exactly as expected, when it matters most. The Opportunity We’re seeking a Mechanical Engineer III to take ownership of the design, development, and qualification of electromechanical systems supporting naval platforms. This role goes beyond design. You’ll help bring systems to life. From reviewing bill of materials and developing detailed technical data packages, your work ensures that what’s built can withstand the realities of the field. You’ll play a key role in translating engineering concepts into robust, manufacturable, and field-ready solutions. What You’ll Work On Design and develop electromechanical systems and mechanical components for naval applications Review and refine bill of materials (BOMs) to ensure accuracy, cost-efficiency, and manufacturability Create and maintain detailed technical data packages (TDPs) to support production and lifecycle management Develop 3D models and engineering drawings using Autodesk Inventor Support and contribute to environmental qualification testing (temperature, vibration, humidity, etc.) Collaborate with cross-functional teams to ensure seamless integration across mechanical, electrical, and system components Support prototype development, testing, and design iteration Ensure compliance with applicable military and industry standards What Makes This Role Different You’re not just designing parts, you’re ensuring systems survive real-world conditions at sea You’ll work across the full lifecycle: concept → design → analysis → testing → deployment Your designs will directly support mission readiness and operational reliability You’ll bridge the gap between engineering design and real-world performance Who This Role Is For This role is ideal for an engineer who: Thinks beyond CAD models and considers how things actually perform in the field Enjoys solving practical challenges like heat dissipation, durability, and manufacturability Takes pride in creating systems that are not only functional—but reliable under pressure Wants to lead design efforts and influence how systems are built and delivered Must-have Qualifications Bachelor of Science degree in Mechanical Engineering or related discipline. Six (6)+ years of full-time professional experience working as a Mechanical Engineer. Experience working with CAD software (AutoCAD and Autodesk Inventor preferred) with strong knowledge of 3D modeling, Bills of Materials (BOM), and manufacturing documentation. Ability to evaluate cost, manufacturability, and quality considerations in engineering designs. Preferred Qualifications Experience supporting DoD or Navy programs Familiarity with MIL-STD environmental requirements Experience with product lifecycle support from concept through production Prior experience leading or mentoring engineers Clearance Requirement Active DoD security clearance The selected candidate will be required to pass a pre-employment third-party background check which may include verification of any of the following: Employment history; Education and/or certifications; Criminal history; Driving Records; Other records or information related to the candidate’s suitability for the position. Benefits Offered: WR offers a comprehensive benefits package for eligible employees including Medical, Dental, Vision, 401(k), Paid Time Off, Company Paid Holidays, Life Insurance, Short- and Long-Term Disability, Flexible Spending Account, Employee Assistance Program, and Tuition Reimbursement. WR is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, traits associated with race, color, citizenship status, national origin, ancestry, genetic information, creed, sex, sexual orientation, gender identity or expression, pregnancy, childbirth, or related medical conditions, including lactation, age, religion, marital status, physical or mental disability, veterans’ status, or any additional factors that are protected by law. EOE/Veteran/Disability. Please see https://wrsystems.com/our-responsibility/ for more information.

A-Line Staffing is now hiring Radiation Therapist in Pequannock Township, NJ 07444. The Radiation Therapist would be working for a Major NJ Healthcare System and has career growth potential. Radiation Therapist Highlights: Schedule: 8:00 AM ??? 4:00 PM, Monday through Friday Pay Range: $55-60 Hourly Radiation Therapist Responsibilities: Accurately deliver planned radiation therapy treatments while operating treatment units with minimal supervision Maintain visual and audible communication with patients during treatment procedures Perform daily linac and CT QA as well as monthly CT QA Perform IGRT, SBRT treatments, portal imaging, CBCT, and AlignRT procedures accurately CT/Simulate patients following department and site-specific protocols Construct immobilization devices, electron blocks, and cerrobend blocks as needed Utilize IV contrast, respiratory gating, and ACQ simulation techniques when required Train therapists in CT/Simulation procedures including SBRT simulation, respiratory gating, and QA functions Maintain and verify MOSAIQ treatment management records including schedules, prescriptions, DRRs, and portal imaging Verify physician and physics treatment planning parameters and attend chart rounds Safely operate CT on rails for IGRT delivery and complete IGRT documentation in MOSAIQ Maintain accurate daily treatment records and document treatment plan changes appropriately Follow all department policies, radiation safety standards, and ALARA principles Report equipment malfunctions and maintain knowledge of emergency procedures Radiation Therapist Qualifications: Successful completion of an approved course in Radiation Therapy ARRT certified and registered Strongly preferred experience using IMRT, 3D, SRS, SBRT, CBCT, and AlignRT Experience with MOSAIQ and radiation oncology workflows preferred If you are interested in this Radiation Therapist position, please apply to this posting with Luke H. at A-Line!

Clearance Requirement: Active Secret Clearance is required to start Travel Requirements: 5-10% Location: Dam Neck – Virginia Beach, VA SUMMARY: WR has a potential opportunity for a Mechanical Engineer, Senior in support of our NAVSEA P&EDM contract. The candidate will be responsible for the design and documentation of mechanical and electromechanical components and systems, as well as supporting fabrication and integration efforts. Position responsibilities will include, but are not limited to the following: Documenting and designing mechanical and electromechanical components and systems. Developing complete drawing packages (Level-3 drawings, block diagrams, Bills of Materials [BOM], manufacturing, assembly, modeling, renderings, and installation) using Autodesk Inventor 3D. Independently analyzing specifications and performance requirements to ensure designs are manufacturable with existing methods. Determining the feasibility of new or modified components, considering cost, space, timeline, planning, and other technical or economic factors. Independently researching and analyzing data such as customer design proposals, specifications, and manuals to assess design or application feasibility. Creating detailed technical drawings and documentation packages based on extensive engineering experience. Candidates must possess the following knowledge, skills, and experience: Bachelor of Science degree in Mechanical Engineering or related discipline. Ten (10)+ years full-time professional experience as a Mechanical Engineer in the design, development, production, or testing of electronic, electromechanical, and/or hydro-electronic equipment. Experience performing thermal analysis of components and conducting Environmental Qualification Testing (EQT) in accordance with Military Standard procedures. Proficiency with CAD software (AutoCAD and Inventor preferred), including strong skills in 3D modeling, BOM generation, and cost/quality assessment. This position is contingent upon funding The selected candidate will be required to pass a pre-employment third-party background check which may include verification of any of the following: Employment history; Education and/or certifications; Criminal history; Driving Records; Other records or information related to the candidate’s suitability for the position. Benefits Offered: WR offers a comprehensive benefits package for eligible employees including Medical, Dental, Vision, 401(k), Paid Time Off, Company Paid Holidays, Life Insurance, Short- and Long-Term Disability, Flexible Spending Account, Employee Assistance Program, and Tuition Reimbursement. WR is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, traits associated with race, color, citizenship status, national origin, ancestry, genetic information, creed, sex, sexual orientation, gender identity or expression, pregnancy, childbirth, or related medical conditions, including lactation, age, religion, marital status, physical or mental disability, veterans’ status, or any additional factors that are protected by law. EOE/Veteran/Disability. Please see https://wrsystems.com/our-responsibility/ for more information.

Requisition Number: 27288 Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $98,283.00 - $140,088.00 Security Clearance: Top Secret Level of Experience: Mid This opportunity resides with Global Security (GS). Mission Technologies’ Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination—not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems—from small watercraft to submarines, surface combatants and aircraft carriers—HII ensures a high state of readiness. HII supports the Department of Energy’s national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients’ toughest nuclear and environmental challenges. Meet HII’s Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense – the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that’s right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: https://vimeo.com/732533072 Summary The Model-Based Systems/CAD Intigration Engineer plays a critical role in developing the authoritative Systems Modeling Language (SysML) system model and producing supporting 2D/3D Computer-Aided Design (CAD) documentation for the Joint Integrated Test and Training Center (JITTC-N) flight simulation environment. This position ensures architectural integrity and serves as the custodian of the system’s “single source of truth,” translating high-level requirements into formal models and practical technical drawings for procurement, installation, and maintenance. Impact Maintains architectural consistency across a complex Information Technology (IT) ecosystem, integrating engineering, networking, cyber, audio/visual (A/V), and simulation components. Supports governance and change control through model-based impact assessments for the Configuration Control Board (CCB) process. Delivers accurate, stakeholder-ready technical products that enable mission-critical training and testing for U.S. Air Force and Department of Defense (DoD) operations. Key Responsibilities System Model Development: Build, manage, and maintain the authoritative SysML model using Cameo Systems Modeler to represent current and future states of flight simulation and IT infrastructure. Requirements Management: Translate stakeholder objectives into formal, verifiable system and subsystem requirements within the model. Architectural Modeling & Analysis: Model static and dynamic system behaviors; provide formal impact assessments for proposed changes to support CCB governance. Technical Drafting & Visualization: Create and maintain 2D/3D technical artifacts—network diagrams, rack elevations, wiring schematics, and facility/component models—using Microsoft Visio and AutoCAD. Stakeholder Documentation: Produce tailored architectural views and documentation (e.g., requirements matrices, interface specifications, system diagrams) for program management, engineering teams, and Test & Evaluation (T&E) stakeholders. Success in position requires consistent display of the following key abilities: Initiative and strong work ethic to work independently, or with a team, or solve challenging problems in a development and prototyping environment. Rapid and effective problem solving: identify issues, analyze and interpret data and develop innovative solutions to a variety of complex problems; Excellent communication skills to document, develop, and present technical issues so that stakeholders across the organization readily understand the content and their related actions. Schedule performance: influencing and collaborating across the organization to result in contract schedule success. What you must have Education & Experience 5 years relevant experience with a Bachelor’s degree in a related field 3 years relevant experience with a Master’s degree in a related field A Ph.D. or Juris Doctor (J.D.) in a related field High School Diploma or equivalent and 9 years relevant experience Technical Knowledge (Knowledge, Skills & Abilities) Hands-on proficiency with SysML and Cameo Systems Modeler. Ability to develop and manage complex system models end-to-end. Strong capability in producing and maintaining detailed 2D/3D technical drawings using Microsoft Visio and AutoCAD. Experience generating architectural products and views for diverse engineering and management stakeholders. Conceptual understanding of network architecture, server infrastructure, virtualization technologies, and cybersecurity boundaries. Credentials Must be a U.S. Citizen. Must have had an Active DOD Top Secret clearance within the last 24 months. Ability to obtain and maintain DoD TS/SCI and relevant SAP/SAR Clearance. Preferred Requirements Experience with flight simulation systems, Live–Virtual–Constructive (LVC) training environments, or related DoD systems. Familiarity with DoD Architecture Framework (DoDAF) or Unified Architecture Framework (UAF). Exposure to cybersecurity principles and the Risk Management Framework (RMF). OMG-Certified Systems Modeling Professional (OCSMP) or similar MBSE-related certification. Experience scripting within Cameo to automate model validation and report generation. Experience supporting integration labs, test events, or system deployments Physical Requirements Adequate visual acuity and manual dexterity for meeting the requirements of the Computer Systems Architect family. HII is more than a job - it’s an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. Why HII We build the world’s most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America’s top large company employers, we are a values and ethics driven organization that puts people’s safety and well-being first. Regardless of your role or where you serve, at HII, you’ll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to buildyourcareer@hii-co.com and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Position: Transportation Engineer I Location: San Luis Obispo, California Duration: Contract Pay Range: $89K - $102K/yr Job ID: 176904 Job Overview: The Transportation Engineer I will assist the Project Manager in the design and development of transportation projects on local roadways and state highways. This role involves preparing design concepts, reports, plans, specifications, and estimates (PS&E) construction documents, as well as providing support during construction. The position requires coordination with team members, interaction with clients, agency staff, and other consultants, while ensuring compliance with project scopes, budgets, and schedules. Additionally, the candidate will provide training for junior staff in technical skills. Responsibilities: Assist in the design and development of transportation projects on local roadways and state highways. Prepare design concepts, reports, plans, specifications, and estimates (PS&E) construction documents. Support construction activities and ensure compliance with project scopes, budgets, and schedules. Coordinate with team members, clients, agency staff, and other consultants under the direction of the Project Manager. Provide training and mentorship to junior staff in technical skills. Qualifications: Bachelor's degree in Civil Engineering or a related field. Current California registration as a licensed Professional Engineer. Minimum of three years of qualifying transportation design engineering experience. Proficiency in using AutoCAD Civil 3D and familiarity with Caltrans standards. Experience with preparing preliminary design reports, design plans, specifications, quantities, and estimates. Knowledge of transportation design standards, including the Caltrans Highway Design Manual (HDM), Project Development Procedures Manual (PDPM), CT Standard Plans, CA Manual of Uniform Traffic Control Devices (CAMUTCD), and the AASHTO Greenbook. Strong work ethic, attention to detail, and self-motivation. Ability to communicate professionally with coworkers and clients. Willingness to work in the office a minimum of three days per week to facilitate teamwork, training, and mentorship. About PTR Global: PTR Global is a leading provider of information technology and workforce solutions. PTR Global has become one of the largest providers in its industry, with over 5000 professionals providing services across the U.S. and Canada. For more information visit www.ptrglobal.com At PTR Global, we understand the importance of your privacy and security. We NEVER ASK job applicants to: Pay any fee to be considered for, submitted to, or selected for any opportunity. Purchase any product, service, or gift cards from us or for us as part of an application, interview, or selection process. Provide sensitive financial information such as credit card numbers or banking information. Successfully placed or hired candidates would only be asked for banking details after accepting an offer from us during our official onboarding processes as part of payroll setup. Pay Range: $$89K - $102K/yr The specific compensation for this position will be determined by several factors, including the scope, complexity, and location of the role, as well as the cost of labor in the market; the skills, education, training, credentials, and experience of the candidate; and other conditions of employment. Our full-time consultants have access to benefits, including medical, dental, vision, and 401K contributions, as well as PTO, sick leave, and other benefits mandated by applicable state or localities where you reside or work. If you receive a suspicious message, email, or phone call claiming to be from PTR Global do not respond or click on any links. Instead, contact us directly at +1 214-740-2424. To report any concerns, please email us at legal@pinnacle1.com #LI-SM4

Position Overview Jansons Associates, Inc. is seeking a skilled, detail-oriented Mid-Level BIM Coordinator / Drafter to join our team in East Rutherford, NJ. In this role, you will play a critical part in designing and modeling our highly specialized chimney and exhaust stack systems. You will bridge the gap between engineering concepts and field execution, utilizing advanced 3D modeling software to ensure seamless, clash-free installations on high-profile infrastructure and commercial projects. Key Responsibilities • 3D Modeling & Detailing: Generate detailed, accurate 3D models and fabrication drawings for specialized chimney and exhaust systems using Autodesk Revit and AutoCAD., • Spatial Coordination & Clash Detection: Actively participate in spatial coordination and clash detection meetings using Navisworks and Revizto alongside general contractors, structural engineers, and MEP trade partners., • Data Management: Utilize Autodesk Construction Cloud (ACC) for model hosting, document control, and cross-team collaboration., • Standard Enforcement: Assist in maintaining and enforcing company BIM standards and template consistency across all assigned projects., • Field Support: Translate complex coordinates and layouts into clear, actionable field installation drawings for our construction crews. Qualifications & Skills • Experience: 5+ years of experience in BIM coordination or mechanical drafting, preferably within the MEP, HVAC, or specialty structural steel sectors., • Software Proficiency: Advanced, hands-on experience with Revit, AutoCAD, Navisworks, Revizto, and Autodesk Construction Cloud (ACC) is strongly preferred., • Technical Acumen: Strong understanding of MEP spatial coordination, architectural drawing interpretation, and structural constraints., • Communication: Excellent verbal and written communication skills to effectively advocate for Jansons' design space during multi-trade coordination meetings. Compensation & Benefits • Type: Full-Time, Permanent, • Benefits: Comprehensive health benefits package, retirement savings plan, and paid vacation/PTO., • Salary: $80-100K per year/Competitive Based on Experience

Please note: This is not an IT or Software Support role. This position focuses on hardware support for WAZER waterjet machines. Candidates should have experience with mechanical systems, hardware maintenance, or machine operation. WHY WE NEED YOU: WAZER is the creator of the world’s first desktop waterjet cutter. We’ve brought industrial-grade precision to the workshops of designers, engineers, and makers everywhere.We are looking for a Technical Support Representative who is curious, mechanically inclined, and eager to help our customers turn their designs into usable parts. We are looking for energetic, adaptable and clever team members that can think on their feet to solve problems that pop up as well as work to continuously improve our systems and processes. YOUR DAILY ROLE: As a Tier 1 Technical Support Representative, you are the face and voice of WAZER. You are the first line of defense, helping our community of makers, educators, and engineers set up their machines and troubleshoot initial challenges. This role is split between two main focuses: first is to provide Technical Support to WAZER Users, while the second is to grow your knowledge of the WAZER by maintaining test setups in the WAZER testing program. The majority of your day will be interacting with customers to help troubleshoot and resolve issues. TECHNICAL SUPPORT DAILY ROLE • Troubleshoot common issues related to cutting quality, machine setup, and component failure, • Provide email, telephone and video technical support for customers in aspects such as hardware, software and workflow., • Guide customers through our online library of resources to empower them to solve problems independently., • Document customer interactions in our support system to ensure a seamless hand-off if an issue needs to be escalated., • Process replacement part orders and coordinate with the operations team to ensure customers get what they need to keep cutting., • Work with Product Development engineers to develop short term and long term solutions, • Identify gaps in our customer-facing documentation and suggest improvements to the team., • Deescalate sensitive situations with customers., • Maintain an inventory of parts and machines in the warehouse. WAZER TEST PROGRAM DAILY ROLE • Maintain test rigs in operation and proactively improve test setups, • Collect and record data in a thorough and organized manner, • Work with Product Engineers to understand failures that arise, • Maintain an organized work and file space AD-HOC RESPONSIBILITIES • Aid the Warehouse department to prepare machines for processing, • Aid in the refurbishment of machines, • Packaging replacement machines for customers as needed, • Maintain inventory of relevant parts MUST HAVE QUALIFICATIONS: • 1+ years in a customer-facing role (Support, Retail, or Service), with hardware or technical products is a major plus., • Must have experience regularly repairing and maintaining electromechanical systems, • Must be a quick learner when it comes to mechanics, • A systematic and process oriented thinker and not solution minded, • Strong technical and written communication skills, • Fast typer and very comfortable navigating the MS and Google suites, • Comfortable leading feedback sessions with other team members and enjoy a good brainstorm session, • Well-organized and willing to work independently and a strong sense of personal organization, • Familiarity with 2D CAD - can open and manipulate an existing sketch, • Comfortable with at least one digital manufacturing tool: laser cutter, plasma cutter, 3d printer, or cnc mill., • Ability to commute to Yonkers, NY, • Ability to lift heavy (~60lbs) objects alone and team lift heavy (~120lbs) objects with another person, • Don’t mind getting your hands dirty NICE TO HAVE QUALIFICATIONS: • Have worked with CRM systems (zendesk, salesforce, etc), • You are a maker, a hacker, a craftsperson, tinkerer, or generally curious and creative, • Can break down a system and identify what makes it work the way it does, • Degree/Experience in a technical area, for example architecture, engineering, industrial design, science, and metalworking, etc., • Highly functional at 2D CAD, • Trade or technical background, • Website Editing skills (squarespace blog pages), • Passion about WAZER’s mission of bringing affordable digital cutting solutions to makers, small business, artisans, and schools. While it would be great to bring on experienced talent for this role, we’ll accept any qualified candidate. If you are passionate about our mission, are good at what you do, and want to learn quickly don’t hesitate to contact us. Be open about what you don’t know and what you excel at, and we’ll do our best to evaluate this with our specific needs! COMPENSATION: Employee Health Insurance, Paid Vacation, Paid Holidays, Paid Sick Days, Opportunities for Overtime, WAZER equity (stock options), Opportunity for advancement in a fast-growing company.

PREMIER BRANDS GROUP HOLDINGS Iconic by Nature, Exceptional by Design Premier Brands Group Holdings, A Global Leader in Apparel, Jewelry and Accessories Design Driven by excellence and innovative talent, Premier Brands Group is a leading, global apparel group of iconic brands, offering a diverse portfolio in denim, women’s apparel, and jewelry. Premier Brands Group is comprised of three distinct businesses that create top-tier brands for the discerning consumer. One Jeanswear Group designs and distributes a distinguished portfolio of branded and private label Jeanswear throughout North America. An apparel industry leader for 30+ years, The Kasper Group has remained committed to excellence in offering iconic brands and relevant womenswear designs. The Jewelry Group has a 20+ year legacy of developing, sourcing and selling elevated fashion jewelry pieces, with a design-centric point of view. Our legacy is rooted in our rich portfolio of the most covetable denim, apparel, jewelry and accessories brands in the world. Each respective group is Iconic by Nature and Exceptional by Design. We currently have a great opportunity for a Senior Denim Designer; this role is primarily responsible for creating and executing original denim designs for Walmart Private Label Brands. The Designer will create products from development through production with a focus on fit, fabric, finish and costing. The Designer must be able to identify emerging fashion trends and business opportunities to be at the forefront of design in this zone. Other responsibilities include, but are not limited to, the following: • Partner with Design Director to research and identify trend and fit direction for current businesses, and new opportunities/white spaces, • Shop retail marketplace, and Walmart and its direct competitors for inspiration and product opportunities, • Plan and design the line according to style plans, sales needs, and emerging trends, • Develop product and marketing concepts for new items, emerging trends, and franchises, • Develop fabrics, wash/color palettes, special trims, and styling details, • Ensure product is being designed within cost parameters, and changes are clearly and quickly communicated to relevant CFT partners as needed, • Communicate and collaborate daily with Walmart designers on seasonal development, emerging trends, and new whitespaces or fabric opportunities, • Work with factories and Walmart designers on execution to make sure the elements fall within our cost targets, • Manage all overseas communication with sample facilities for sample execution, • Attend all fittings, including but not limited to comparison fittings, first proto fittings and production fittings, • Give concise feedback to technical design on how to adjust garments, • Ensure production fits are to our specifications, • Merchandise and style showrooms for internal presentations and presentations to Walmart Design partners, • Collaborate with marketing and sales on collateral for buyers and in-store marketing needs, • Build strong cross-functional relationships with sales, production, tech, fabric R&D and marketing, • Manage/update collateral being shared with CFT and Walmart Design team, including but not limited to sketches, CADS, line sheets, etc., • Partner with Technical Design and 3D team to create renderings of Design proposals, for aesthetic and cost review, • Organize sketch and/or sample reviews with CFT prior to handing off assets or styles to the Walmart Design team, • See tasks through to execution, • Prioritize and meet deadlines, • Work closely with Director of Design, VPs of Sales and production teams in all aspects of product development, • Sr. Designer should be prepared to take on additional responsibilities, changes in process, and learn new programs and technologies as needed to work with Walmart To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • BA degree from accredited art/fashion school, • 7 + years of experience in apparel design, • Proficient sketching in Illustrator and proficiency with Photoshop, • Ability to interface with Department heads outside of Design i.e., Production/Sales to drive results, • Ability to develop a line from concept to completion without supervision from supervisors, • Ability to identify key trends and determine how they appropriately relate to the brand/consumer, • PLM experience (Centric) and 3D program experience (Browzwear Lotta and/or CLO) a plus but not required Salary Range: $110K - $120K *Actual base salary for this role within the above range will be based upon experience, qualifications and/or assigned unit. We are an EEO/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status.

High Life is growing activewear manufacturer in partnership with the world’s premier brands. We are creating exceptional value from the ground up and always staying ahead in our field. The Assistant Technical Designer will support our men’s and kids’ activewear business by working closely with Senior Technical Designers and Technical Design Manager, collaborating with Design, Production and Product Development, and ensuring quality and delivery that align with the company’s values and practices. We have a supportive work environment and opportunities for growth. Responsibilities: • Partner with Senior Technical Designer and Manager on the full development lifecycle, from prototype through production, • Maintain sample log-in chart, track and open packages, and distribute samples, • Assist in measuring and examining Fit/PP samples, comparing factory’s pattern against block pattern using 3D software, and preparing for scheduled fittings, • Dress samples on mannequins and take photos in fittings, • Assist in writing fit comments with necessary detailed sketches and photos, • Communicate daily with various overseas vendors via email, • Organize records and keep work-in-progress charts up to date Qualifications: • 1+ years of experience in Technical Design, • Bachelor’s degree in Fashion Design, Technical Design, or related field preferred, • Basic understanding of garment construction, fit, and grading, • Excellent time management and organizational skills to manage multiple tasks in a fast-paced environment, • Keen attention to detail and capacity to follow through workflow, • A sharp eye for fit, proportion, and detail, paired with the ability to communicate technical feedback clearly and constructively, • Excellent written and verbal communication skills, • Team player, collaborative, solutions-oriented mindset, • Experience with Microsoft Office, Adobe, PLM or similar software, • Pattern and 3D program knowledge is a plus, • Experience working on Mac devices is a plus Annual salary range starting at $55,000+ The disclosed salary range is commensurate with experience and does not reflect the total compensation package. Our associates have access to other valuable benefits that our Human Resources team is happy to share with candidates during the interview process.

SENIOR PACKAGING DESIGNER $85-105K Salary commensurate with experience About the Role Pets + People is a trusted and respected manufacturer of pet and household consumer goods for leading brands such as Burt’s Bees, Arm & Hammer, Clorox and Glad, along with top entertainment properties Disney, Harry Potter and many more. We’re seeking a high-energy Senior Packaging Designer to drive concept development and production for a broad CPG portfolio. You’ll balance creative exploration (new concepts and line extensions) with heavy production and adaptation work across existing lines, retail displays, trade shows, and more. What You’ll Do • Create packaging concepts for new products and evolve existing brand systems., • Work with Product Managers to confirm briefs, specs, timelines, and task accuracy., • Traffic and deliver artwork on schedule; maintain version control and release logs., • Prepare files for production per templates and direction; manage adaptations across SKUs, sizes, and markets., • Ensure designs meet internal standards and all licensing partners’ brand guidelines., • Guarantee all files are complete and correct (dielines, bleeds, color profiles, barcodes/GTINs, legal copy)., • Follow and improve SOPs for approvals, file naming, asset libraries, and archival., • Participate in quarterly competitive shopping trips; translate insights into actionable design updates., • Partner across teams to understand new brand needs. What You’ll Bring • 7+ years’ experience in consumer goods packaging design., • Bachelor’s degree in Design/Art or equivalent experience., • Strong leadership skills with empathy and compassion; experience mentoring others., • Capable multi-tasker who can pivot with shifting priorities and deadlines., • Clear, collaborative communicator who welcomes feedback and shares knowledge., • Deep understanding of brand guideline usage; excellent typography, composition, and color sense., • Expert in packaging production and retail display design; factory-ready file setup is second nature., • Extensive knowledge of substrates, materials, printing (flexo/litho/digital), finishing, and comping., • Proficiency: Adobe Creative Suite (Ai, Ps, Id) and Microsoft Office on Mac., • General understanding of product manufacturing processes., • Trend-aware, creative problem solver with a positive, fun-loving attitude—who also loves pets., • Portfolio showcasing relevant packaging and display work is required. Nice to Have • Experience in pet or home-care categories (toys, treats, grooming, odor control, laundry/tabletop/dishwashing), • Basic knowledge of regulatory/claims (FNS, CPSIA, Proposition 65, recycling symbols, country of origin)., • 3D visualization or mockup skills (KeyShot, Dimension) and color proofing experience., • Experience with molded items and/or trade shows is a plus. Company Perks • Hybrid role: three in-office day, two work from home, • 20 additional work-from-anywhere days, • Paid time off, • Health, dental and vision insurance401k available, • Pet friendly office, • Access to Udemy for personal growth. How to Apply: Send your resume and portfolio to Dani at d.harris@petspeople.com. Please include examples of production files, printed outcomes, and any retail display/trade show work.

Title: Digital Specialist I Location: New York, NY 10001 (Hybrid) Contract: 06+ months About Us: At Cogent Infotech, we believe in creating opportunities that empower individuals and transform organizations. With over 22 years of excellence in consulting and talent solutions, we pride ourselves on building inclusive workplaces and driving innovation in everything we do. Our diverse teams bring unique perspectives to help deliver cutting-edge solutions to global clients across both public and private sectors. Job Description: • 1-2 years minimum professional working experience, not fresh out of college, • 3 buckets encompass this role, • Creation of pack shots working with the marketing team and agency to create rendering for all places this asset will live, • Textures – responsible for collecting formulas for the marketing team and working with another agency to create texture swatches – will also work with marketing and development teams to make sure the digital texture image is identical to the product/sku, • 3rd – creator videos – tutorials and how to, create briefs, identify influencers, working with marketing on the messaging and instructions- this bucket taps into the creative portion of the role – the consultant will eventually take this on end to end when they are ready to make that step, • Ways of working are already established, many skus, go-live dates – will work as the PM for these skus – establishing and delivering deadlines, managing and monitoring progress, etc, • Someone who is agile, can react to change quickly and adapt, solution-oriented, • Thrive in a fast and rapidly changing environment, • Independent worker, ability to thrive in independent work space, entrepreneurial in the sense that they own this portion of the business from end to end A new sku comes in from marketing…. • Confirm if pack shots and textures are needed and gather a timeline of deliverables, • Brief two external agencies on the project from marketing – partners closely with the agencies for deliverables and quality, • Sends to marketing once completed and confirm revisions and changes, • Deliver FB to agency, • Upload once completed/go live Digital Product Content Project Manager: • Responsible for the project management, shade color assessment & retouching of all digital product imagery (color cosmetics pack shots & textures), as well as the creation of ECOM creator videos for the Maybelline Global team., • Must have deep understanding of color complexities within cosmetics categories., • Must be self-motivated with ability to juggle multiple projects with strong time-management skills & high levels of organization and attention to detail, • Must have aptitude to thrive in a fast-paced and rapidly changing environment, • Bonus if expert in digital retouching (Adobe Creative Suite) Job Responsibilities: • Own & lead the creation of 3D Packshots & Textures for use across omni-platforms, • Own & lead the creation of ECOM videos (ATF & BTF), • Partner with Maybelline Digital teams, marketing teams, and 3rd party agencies to develop timelines, coordinate artwork, and monitor each stage in the development process of 3D Packshots, textures and videos, from pre-launch to asset delivery for all launches., • Manage budgets for: 3D Packshots, texture re-touching & creator videos., • Work closely with production, marketing and global partners – ensuring that all agreed-upon content is produced, published and distributed as planned., • Lead the Opera (asset management system) process: select, tag and upload all the digital assets (visuals, videos, etc.) created by different teams., • Coordinate the gathering of products and formulas with the different teams, prepare the texture base photo-shoot and ensure proper follow-up after (selection, retouching.), • Assess multiple rounds of digital renderings for color. Shades must digitally represent the in-real-life shade color of the product, including the texture swatch., • Assist ECOM Team with special projects as needed, including – event concepting, photoshoot support, creation of ECOM guidelines & dossiers., • BONUS: Retouch using Photoshop all texture bases & product packaging to the shade range of multiple categories (eye, face, & lip) Core Competencies: • The project manager must come with knowledge of the digital marketing landscape with a focus on social and ecommerce content., • Strong organization, communication and interpersonal skills are a must. Collaboration skills are required; you will be working cross-functionally to ensure deadlines are always met., • Ability to work in a fast-paced environment, managing large and dynamic multi-channel content partnerships with various external agencies and partners, as well as internal cross-functional teams., • Ability to work under pressure of tight deadlines and frequent changes from multiple stakeholders, • Our partners include product and marketing managers, art directors, designers, photographers, production companies and you are the glue that brings the content and social media projects together for a cohesive customer experience aligned with our brand. Job Requirements: • 1-2 years minimum of relevant, professional working experience, • Bachelor’s degree is required, • Prior experience in marketing, digital, or eCommerce. Experience working on a beauty brand is preferred, but not necessary., • Deep understanding of color complexities across different makeup categories (eye, face, lip), • Excellent project management, communication, and organizational skills, including strong prioritization skills & effective leadership of cross-functional projects, • Must be self-motivated with ability to juggle multiple projects with strong time-management skills & high levels of organization and excellent attention to detail, • Must have aptitude to thrive in a fast-paced and rapidly changing environment, • Ability to think creatively and conceptually, with good analytical and problem-solving skills, • Proven ability to work effectively in a cross-functional environment with excellent interpersonal (written and oral) communication skills & strong presentation skills, • Must be professional and energetic with a positive, solution-oriented attitude, • Proficiency in Microsoft Office Suite (PC), with advanced skills in PowerPoint, • Proficiency in Adobe Creative Suite (InDesign and Photoshop) is a plus Equal Opportunity & Inclusion Statement Cogent Infotech is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment where everyone feels welcome and valued. We encourage applications from individuals of all backgrounds, identities, abilities, and experiences. If you’re excited about this role but don’t meet every requirement, we still encourage you to apply Application Process Please submit your resume and a short cover letter through our online portal. Our process includes an initial resume review, a virtual interview, and a short technical assessment. If you need accommodations, feel free to inform us—we are happy to assist. Join Us At Cogent Infotech, your ideas matter. Join a purpose-driven organization that celebrates diversity, encourages collaboration, and invests in your future.

Cover Letter Required Abraxas Energy Consulting, LLC, a subsidiary of Hillmann Consulting, LLC, is a nationwide energy auditing and consulting firm that provides energy assessments, training, and software tools to assist facilities in reducing energy and water waste. Together, Abraxas and Hillmann can provide customized Energy Analysis, Energy Accounting, Environmental Health and Safety, Remediation Support, Real Estate Due Diligence, Geotechnical, and Laboratory Analysis services. Abraxas and Hillmann deliver consulting with an uncompromising commitment to customer service, safety, and increasing value and quality to our clients. Abraxas has an immediate opening for an experienced Energy Engineer for nationwide coverage out of the Union, NJ area to lead facility energy and water assessments and provide other energy consulting services. Typical assignments will include leading on-site energy and water assessments, retro-commissioning activities, field measurement and verification, and field diagnostic testing/deployment. The Energy Engineer is expected to be capable of leading an energy audit following ASHRAE’s Level 2 energy audit methodology for most facilities independently from start to finish. However, the Energy Engineer is also expected to work in small teams when necessary on larger projects and to facilitate mentorship of more junior team members. This position requires a high level of individual initiative, responsibility, work ethic and time management skills to meet shifting and overlapping project deadlines. The work will involve regular interaction with clients in person, on the phone, and via email. The Energy Engineer will work with team members to request information, solicit feedback, and clearly define project responsibilities is crucial. The Energy Engineer will also need to communicate with their peers and Project Managers regarding their schedule, roadblocks to their work, and additional support that may be required. Responsibilities: Field Tasks The tasks will range in complexity from one day walk thru site visits to investment grade energy audits to identify energy reduction opportunities in lighting, HVAC, building envelope, water, renewables, controls, and other energy and water using systems. • Conduct/lead detailed energy surveys of facilities ranging from simple office or multifamily properties to complex high-rise offices, manufacturing, and/or other energy intensive buildings., • Lead building retro-commissioning activities including functional performance testing and monitoring of equipment., • Lead measurement and verification field work including visual verification, sampling strategies, and complex field measurements., • Conduct energy audits., • Adapt to varying field data collection techniques including handwritten notes, tablet-based tools, photo logging, review of as-built drawings, review of building control systems, use of measurement devices and hand tools, etc., • Deploy field diagnostic equipment such as wireless monitoring systems, data loggers, flow meters, power loggers, multimeters, temperature devices, air flow meters, manometers, lighting meters, current transducers, appropriate personal protective equipment (PPE), hand tools, etc. Analysis • Keep current with new energy efficiency technologies and strategies., • Analyze and evaluate results from measurements including interval energy data, lighting readings, etc., • Interpret, and tabulate information from facility mechanical and electrical drawings such as lighting fixture counts, mechanical equipment ratings/locations, piping diagrams, etc., • Interpret control strategies and sequences. Analyze and propose optimum strategies for all types of energy using equipment., • Complete detailed energy allocations that predict with reasonable accuracy the breakdown of major energy users in a building., • Evaluate operations and maintenance savings and estimate the cost to implement energy conservation measures., • Exercise experience and research to scope energy improvements to building systems in detail and quantify accurate installed cost estimates., • Communicate with and obtain vendor quotes for proposed improvements as needed., • Complete life-cycle cost analysis for energy improvement projects., • Perform energy and economic analysis of energy efficiency measures using energy modeling software, spreadsheets and other tools. Reporting and Presentation • Document and communicate the results of energy audits through written reports, PowerPoint presentations, meetings, and conference calls., • Meet with clients and team members to discuss energy efficiency measures., • Keep current with new energy efficiency technologies and strategies., • Convey technical concepts and recommendations in a clear, concise, and meaningful way. Other • Review the work of more junior Auditors and Energy Analyst assigned to your own projects and ensure all tasks are completed accurately., • Mentor and train supporting Energy Analyst and Auditor in how best to support the engineering project., • Conduct peer review of other engineers’ work., • Conduct scoping assessments to evaluate client facilities for potential work with Abraxas, • Support business development through technical input on proposals, quotes, capabilities, etc., • Support operations with the optimization of processes and development and improvement of tools, templates, resources, and training content. This job has no supervisory responsibilities. Minimum Qualifications (Education, Skills, and Experience): Meeting these qualifications will make you eligible for a starting salary at the low end of the posted range: • Preferred: Bachelor of Science Degree in Mechanical Engineering, Electrical Engineering, or other four-year STEM degree AND 3+ years of experience in the analysis of energy using systems in existing buildings., • Minimum: 2-year technical, math, or science degree AND 5-10+ years pf experience in the analysis of energy using systems in existing buildings., • Mastery of the English language – written and spoken., • Advanced competency with Microsoft Excel and Microsoft Word and ability to improve., • Experience surveying and analyzing the operation of complex mechanical and electrical systems in buildings and their associated control algorithms., • Experience writing detailed energy audit and engineering reports including conveying as-found conditions and recommended capital improvements., • Experience with the application of advanced mathematical concepts to energy use analysis in buildings., • Experience presenting the results of an energy audit or re-commissioning project to small groups of stakeholders. Additional Valuable Qualifications: Meeting these qualifications may make you eligible for a starting salary at the high end of the posted range: • 7+ Years of related experience, • NABCEP Certification: PV Installation Professional (PVIP), PV Design Specialist (PVDS), or PV Installer Specialist (PVIS), • Professional Engineer license in any state., • A certification in any of the following: Certified Energy Manager, Certified Lighting Efficiency Professional, LEED Accreditation, Certified Energy Auditor, Building Performance Institute, HERS Rater., • Experience with self-performing advanced field measurements in existing buildings including: spot and long-term power measurements, 3 phase power measurements, airflow duct traverses, ultrasonic flow metering, combustion gas analysis, airflow hood testing, thermal imaging, non-destructive envelope measurements, etc., • Experience in new construction and/or existing building commissioning., • Experience developing energy simulation models with DOE-2, eQUEST, TRANE TRACE 700, TRACE 3D or similar programs., • Experience creating measurement & verification plans for energy projects. TRAVEL - While many project assignments are local or regional, the Energy Auditor should expect to be gone from home 5-7 nights per month on average. Abraxas reimburses all travel expenses according to the company’s Travel and Expense Policy. Benefits: Abraxas Energy Consulting, LLC and Hillmann Consulting, LLC are committed to the professional development and well-being of our employees. The following benefits are offered to employees: · Competitive salary · Paid vacation and sick leave · Medical, dental, and vision insurance · Employer-401(k) Plan · Tuition assistance · Volunteer time off Abraxas Energy Consulting, LLC is an equal opportunity employer.

Artisan Council based in downtown NYC, is a boutique digital marketing agency empowering progressive brands in the constantly evolving social and digital landscape. Our team believes in the power of stans and fans and aims to build brand loyalty through community involvement and engagement. AC believes that having an informed community of diverse voices is the key to making an impact in today’s ever-changing world of social media and content. AC’s team members are passionate about diversity, community, content, culture, innovation, and trying things first! We’re looking for people who share our passion, people who live and breathe beauty, have exceptional research, communication, and creative thinking skills, take an empathetic approach to everything they do, and enjoy helping others succeed. Artisan Council is seeking a Creative Director (3 month contract) for several upcoming projects, with experience in 360º social campaign creative and content production, predominantly including video campaigns. Reporting to Artisan Council’s Creative Director for the duration of the project, you will be goal, timeline, and big picture driven, and a team player, and demonstrate leadership and ownership of your work and resilience in the face of client feedback. You’ll be an integral part of leading creative execution of business pitches for social campaigns and supporting our creative team with direction of social concepts for always on content, as well as aiding in creative direction for any strategy decks for new clients. Together, we as a team are dedicated to building each other up, helping each other grow, and achieving goals together. Equal Opportunity We are an equal-opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Our mission is to create a happy, safe, considerate, and inspiring work environment for all. What will you be responsible for during this project? Campaign Concept Development: • Lead ideation and development of campaign concepts that align with brand goals and target audiences, • Translate marketing objectives into compelling creative strategies and narratives, • Collaborate with Creative Director and Graphic Designers to develop pitch decks, moodboards, and storyboards Creative Oversight for Content: • Oversee execution of social first video edits and social collateral designs, • Ensure output meets brand standards, visual identity, and campaign messaging Cross-Functional Collaboration: • Work closely with internal strategy and social teams for seamless integration of creative with broader campaign strategy, • Communicate vision clearly across internal and external teams (including freelance talent and agencies), • Participate in social creative check-ins, approvals, and stakeholder reviews Creative Timelines & Creative Management • Own and manage the creative timeline in alignment with given touchpoints, • Identify roadblocks early and course-correct in real time, • Maintain quality control across all creative phases What kind of skills should you have? Please note carefully. Applicants without this experience will not be considered. • 6+ years relevant experience in Art Direction with a focus on D2C, beauty brands, and consumer products., • 6+ years relevant experience in Graphic Design, especially with the Adobe Suite (most importantly, Photoshop, Illustrator and After Effects, with a focus on 2D animation mockups, D2C, beauty brands, and consumer products. As well as being proficient in use of GenAI tools for concept development and mockup creation (both still and motion)., • Animation (2D/3D) skills a plus., • Working knowledge of HTML and CSS skills is a plus., • Basic knowledge of video editing software a plus., • You will have a working knowledge of Google Docs, Google Sheets, and the Office suite., • You will have project management experience, including experience in testing and delivering online campaigns; development projects including websites and landing pages, and more., • You will have familiarity with project management and content planning tools such as Trello, Asana, Jira, Basecamp and more, and the ability to learn new systems., • You will have excellent written, verbal and visual communication skills., • You will live and breathe social media and online content, and have evidence of a developed social media/web presence, especially on TikTok., • You will be a creative thinker and problem solver, able to generate multiple ideas and fresh creative approaches on the go., • You will have knowledge of and passion for technology, media, cultural & content trends, and value and contribute to team brainstorms & conversation in these areas., • You will be a self-starter, possessing the ability to act and operate efficiently and independently to accomplish objectives., • You will have optimum time management skills with attention to detail, especially under pressure or time-sensitive deadlines., • You will be willing to work nontraditional hours, independently, remotely, and go above & beyond where necessary., • You will have an understanding of overall commercial business practices, trading terms and conditions. Project Fee & Timeline: • $8,500-$10,000/month

Responsibilities Mechanical Design & Product Development • Translate product requirements into manufacturable mechanical designs, • Create and maintain CAD models, assemblies, and engineering drawings (SolidWorks preferred), • Support prototyping, engineering builds, and pilot production activities, • Drive DFM/DFA initiatives with vendors and manufacturing partners, • Participate in design reviews and technical problem solving, • Support development of miniaturized electromechanical systems, • Consider reliability, durability, and environmental protection requirements Documentation & Design Controls • Develop and maintain product requirements and engineering documentation, • Support Design History File (DHF) activities and regulated product development processes, • Participate in risk assessments and DFMEA activities, • Ensure design outputs meet quality and regulatory requirements Required Qualifications • Bachelor's degree in Mechanical Engineering or related field, • 4+ years of experience in medical devices or another highly regulated industry, • Strong SolidWorks or 3D CAD experience, • Experience working within design controls or regulated development environments, • Experience with verification testing and test fixture development, • Hands-on prototyping experience, • Experience working with vendors, suppliers, and manufacturing partners, • Strong troubleshooting and root cause analysis skills, • Ability to work onsite in Newark, NJ several days per week Preferred Qualifications • Wearable, sensor-integrated, or miniaturized product experience, • Design transfer and manufacturing support experience, • Injection molding, adhesives, sealing methods, and precision assembly knowledge, • DFMEA and risk management experience, • Startup or early-stage company experience, • 3D printing and rapid prototyping experience, • Familiarity with statistical analysis and reliability testing method

Job Title: Mechanical Engineer II Location: New York, New York Duration: 6 Months W2 Contract (potential extensions) Our client is seeking a Mechanical Engineer with rapid prototyping, fixture development, and mechanical testing experience to contribute to wearable program, we seek someone with the curiosity to research and investigate the design and functionality of a new class of wearable technology. In this role, you will prototype and rework design concepts, generate fixture designs, make engineering drawings, execute testing, and analyze results. The role is 100% in-office in NYC. Years of experience needed: At least 3 years of experience, Candidates should be senior enough to own components independently Top 3 must-have HARD skills: • Mechanical design for consumer electronics (NX, SolidWorks, or equivalent parametric CAD), • Hands-on prototyping and fabrication (3D printing, CNC, fixture design, bench-level assembly and debug), • DFM experience with injection molding and/or sheet metal (tolerance stackups, GD&T, vendor drawing packages) Good to have skills: • Experience with wearable devices or miniaturized assemblies, • Familiarity with textile integration or flexible materials, • Comfort with test fixture design and bench-level reliability testing, • Working knowledge of thermal and structural FEA Responsibilities: • Research, design, develop, manufacture, and test wearable devices with a focus on rapid prototyping and device rework/repair, • Design mechanical test fixtures for both subsystem and system-level characterization and generate testing procedures, • Plan and execute Design of Experiments (DOEs) to evaluate key performance indicators for a wearable product, • Execute mechanical testing to characterize hardware using both standard and custom testing procedures, including 3-point bend testing for band stiffness and environmental testing, • Analyze test data against hardware specifications and contribute to the development of new KPI specs, • Assist on device failure analysis and conduct root cause investigations, • Provide 2D/3D CAD models of fixture and prototype concepts, • 100% in-office and lab work in NYC to include prototype assembly and rework, fixture development, and mechanical testing Education/Experience: • Bachelor's degree in mechanical engineering or a related field required

High Life is growing activewear manufacturer in partnership with the world’s premier brands. We are creating exceptional value from the ground up and always staying ahead in our field. The Assistant Technical Designer will support our women’s activewear business by working closely with Senior Technical Designers and Technical Design Manager, collaborating with Design, Production and Product Development, and ensuring quality and delivery that align with the company’s values and practices. We have a supportive work environment and opportunities for growth. Responsibilities: • Partner with Senior Technical Designer and Manager on the full development lifecycle, from prototype through production, • Maintain sample log-in chart, track and open packages, and distribute samples, • Assist in measuring and examining Fit/PP samples and preparing for scheduled fittings, • Dress samples on mannequins and take photos in fittings, • Assist in writing fit comments with necessary detailed sketches and photos, • Communicate daily with various overseas vendors via email, • Organize records and keep work-in-progress charts up to date Qualifications: • 1-2 years of experience in Technical Design, • Bachelor’s degree in Fashion Design, Technical Design, or related field preferred, • Basic understanding of garment construction, fit, and grading, • Excellent time management and organizational skills to manage multiple tasks in a fast-paced environment, • Keen attention to detail and capacity to follow through workflow, • A sharp eye for fit, proportion, and detail, paired with the ability to communicate technical feedback clearly and constructively, • Excellent written and verbal communication skills, • Team player, collaborative, solutions-oriented mindset, • Experience with Microsoft Office, Adobe, PLM or similar software, • Pattern and 3D program knowledge is a plus Annual salary range starting at $55,000+ The disclosed salary range is commensurate with experience and does not reflect the total compensation package. Our associates have access to other valuable benefits that our Human Resources team is happy to share with candidates during the interview process.

3D Motion Designer / Multimedia Artist - New York, NY | 1+ Years Experience The Planet Group’s New York-based Law Firm is seeking a 3D Motion Designer / Multimedia Artist to join their team. In this role, you will help conceptualize, design, produce, film, edit, and distribute high-quality 3D/2D animation, video, and audio productions. This role requires strong 3D animation and motion graphic skills, alongside videography, photography, and other digital media expertise. • Note on Specialization: While this role supports various functions (including video and photography), the core of this position is high-level 3D Motion Artistry. We are seeking a specialist who can leverage Maxon Cinema 4D and industry-standard plugins to create sophisticated, broadcast-quality 3D assets., • Location: On-site in New York (Mon-Friday on-site), • Pay Rate: $40-$44/hr depending on experience (W2 and benefit options), • Duration: 6-months to start with potential extension / conversion 3D Motion Designer / Multimedia Artist Responsibilities: Primary Focus: • Support the Multimedia department in creating high-end 3D/2D animation and motion graphics from ideation to distribution., • Create or refine video/audio, graphic, infographics, and animation elements using Adobe Creative Suite., • Act as videographer and photographer for shoots, including sound monitoring, lighting, and retouching., • Prepare and operate studio equipment (cameras, audio mixers, video switchers, and set design)., • Produce and direct audio projects such as podcasts and voice-overs., • Manage and organize media assets and facilitate project briefs to ensure deadlines are met. 3D Motion Designer / Multimedia Artist Qualifications: • 1+ years of proven experience in professional multimedia production., • Expertise in 3D: High proficiency in Maxon: Cinema 4D and associated plugins (X-Particles, Greyscalegorilla, INSYDIUM, Forester)., • Software Mastery: Strong proficiency in Adobe Creative Suite (After Effects, Premiere Pro, Photoshop, Illustrator) and tracking software (Mocha Pro, PFTrack)., • Visual Storytelling: Ability to bring a script to life via storyboarding and 3D pre-visualization., • Adaptability: Must excel in a high-pressure, deadline-driven environment while maintaining a positive, team-oriented attitude., • Education: Degree in Design, Animation, Visual Arts, or a related discipline. Please Note: This role requires permanent work authorization in the U.S. We are unable to provide visa sponsorship now or in the future.

Company Profile: At CAVA we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. We foster a culture built on five core values: • Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others., • Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious., • Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt., • Passion for Positivity: We greet each day with warmth and possibility., • Collective Ambition: We have high aspirations that are achieved when we work together with a shared purpose. Job Title Associate Design Manager; New Restaurant Opening Design Studio (This is a hybrid role and requires a minimum of 3 days/week in our Brooklyn design office) Position Summary CAVA is seeking an Associate Design Manager to join the NRO (New Restaurant Opening) Design Studio within the Development team. This role will support the design and execution of new restaurant projects across CAVA’s expanding national footprint. The ideal candidate is highly organized, detail-oriented, and passionate about hospitality design. They thrive in a collaborative environment, can manage multiple projects simultaneously, and are excited to help translate the CAVA brand into physical spaces that are functional, efficient, and inspiring. This role partners closely with internal cross-functional teams, external consultants, landlords, and vendors to ensure projects are delivered on schedule, within budget, and aligned with CAVA’s brand and operational standards. What You’ll Do: Project Design & Coordination • Support the design and execution of new restaurant projects from pre-lease through construction administration., • Develop preliminary test fits and lease exhibits for prospective restaurant sites., • Coordinate and manage design activities throughout the project lifecycle, ensuring adherence to brand standards and project timelines., • Participate in project kickoff meetings and ongoing coordination with internal stakeholders and external consultants. Consultant & Vendor Management • Review consultant contracts, scopes of work, schedules, and deliverables for alignment with project expectations., • Coordinate with architects, MEP engineers, kitchen consultants, signage vendors, millwork fabricators, and other project partners during the design process., • Facilitate design reviews and approvals across internal departments and external stakeholders, including landlords where required. Due Diligence & Technical Review • Review due diligence reports and site assessments to identify project risks and opportunities., • Partner with utility and engineering consultants to evaluate infrastructure requirements and project feasibility., • Coordinate landlord work letters and integrate landlord scope requirements into construction documentation., • Construction & Field Support, • Collaborate with the Construction team to resolve site-related design issues during construction., • Respond to RFIs and assist with sketches, clarifications, and field coordination as needed., • Conduct site visits and attend construction progress meetings to ensure project quality and brand consistency., • Travel to project sites across CAVA markets as needed. Continuous Improvement & Brand Stewardship • Maintain organized project documentation in accordance with company standards., • Support ongoing refinement of design standards, systems, and rollout processes., • Identify opportunities to improve project execution, scalability, and consistency across the restaurant portfolio., • Contribute to the evolution of the CAVA brand experience through thoughtful, high-quality design solutions. The Qualifications: • Bachelor’s degree in architecture, Interior Design, Environmental Design, or related field., • 3+ years of professional experience in hospitality, restaurant, retail, or commercial design., • Experience supporting multi-unit rollout programs within restaurants, retail, or hospitality environments preferred., • Knowledge of restaurant planning, foodservice operations, health code requirements, and restaurant infrastructure systems., • Proficiency in AutoCAD, Revit, SketchUp, Adobe Creative Suite, and Microsoft Office., • Experience with rendering and 3D visualization tools preferred., • Strong organizational, communication, and time management skills., • Ability to manage multiple projects and priorities in a fast-paced environment., • Strong attention to detail and problem-solving mindset., • Collaborative approach with the ability to work effectively across departments and external partners., • Understanding of current hospitality and retail design trends and best practices., • Ability to travel up to 25%. Physical Requirements: • Ability to maintain stationary position to be able to operate a computer and other office equipment, • Must be able to identify, analyze and assess details, • For certain positions, must be able to occasionally move or transport items up to 50 pounds, • Ability to communicate with others and exchange information accurately and effectively, • Constantly positions self and move about to support ordinary restaurant or food production support or office operations, as applicable, • Ability to work in a constant state of alertness and in a safe manner What We Offer: • Competitive salary, plus bonus and long-term incentives*, • Early Wage Access!, • Unlimited PTO, paid parental leave, plus paid opportunities to give back to the community, • Health, Dental, Vision, Telemedicine, Pet Insurance plus more!, • 401k enrollment with CAVA contribution, • Company-paid STD, LTD, Life and AD&D coverage for salaried positions*, • Free CAVA food, • Casual work environment, • The opportunity to be on the ground floor of a rapidly growing brand, • All exempt and non exempt employees are eligible for benefits. Benefits are effective the 1st of the month following 30 days of service and you have until the day before the effective date to enroll. A new hire can enroll in our benefit program by selecting a link that is emailed directly to the new hire at their personal email address once hired., • Please note that visa sponsorship is not available., • The posting range is an all cash range. *Indicates qualifying eligible positions only This job description is not intended to be a comprehensive list of all the duties and responsibilities of the position and such duties and responsibilities may change without notice. CAVA – Joining “A culture, not a concept” As an equal opportunity employer, CAVA considers applicants for all positions without regard to race, color, sex, religion, national origin, disability, age, height, weight, marital status, sexual orientation, familial status, genetic information or any other characteristic or protected classes as defined by federal, state, or local law. California applicants: Please visit our Notice at Collection and Privacy Policy to learn about our information practices in the job application and employment context.

Our luxury travel client is seeking a talented 2D/3D Animator for a branded storytelling project. The role involves taking existing sketches and developing them into a polished 5-minute animated video with a strong narrative component. Ideal candidates should be comfortable blending visual storytelling, motion and design into a cohesive final piece. • Pay Rate: $70.00/hour, • Location: 100% remote Responsibilities: • 5-minute animated video, • 2D and/or 3D animation, • Existing sketches and creative direction provided, • Production timeline: June 8 – June 30 Required Qualifications: • Strong animation and storytelling skills, • Experience developing boards/sketches into final animation, • Ability to work within a fast-paced production schedule, • Portfolio or reel featuring cinematic, commercial or branded content If you meet the required qualifications and are interested in this role, please apply today. The Solomon Page Distinction Solomon Page offers a comprehensive benefit program for hourly employees. We pride ourselves on offering medical, dental, 401(k), direct deposit and commuter benefits to our employees, including freelancers - which sets us apart in the industries we serve. About Solomon Page Founded in 1990, Solomon Page is a specialty niche provider of staffing and executive search solutions across a wide array of functions and industries. The success of Solomon Page reflects an organic growth strategy supported by a highly entrepreneurial culture. Acting as a strategic partner to our clients and candidates, we focus on providing customized solutions and building long-term relationships based on trust, respect, and the consistent delivery of excellent results. For more information and additional opportunities, visit: solomonpage.com and connect with us on Facebook, and LinkedIn. Opportunity Awaits.

Garrett Singer Architecture + Design (@garrettsingerdesign) is currently seeking a talented and experienced Senior Architect to join our growing team. We are a NYC based hospitality driven studio known for thoughtful, design forward environments that blend creativity with technical excellence. This is an opportunity to take a leadership role in shaping impactful projects from concept through completion. About the Role The Senior Architect will lead project teams, oversee design development, and ensure the successful delivery of high quality architectural work. This role requires a strong design sensibility, technical expertise, and the ability to manage both clients and internal teams in a fast-paced studio environment. Key Responsibilities • Lead architectural projects from concept through construction administration, • Develop and present design concepts, drawings, and presentations to clients, • Coordinate with consultants, contractors, and internal team members, • Oversee production of construction documents and ensure code compliance, • Manage project schedules, budgets, and deliverables, • Mentor junior staff and contribute to a collaborative studio culture, • Maintain strong client relationships and represent the firm professionally Qualifications • Bachelor’s or Master’s degree in Architecture (required), • Professional licensure (preferred but not required), • 8–12+ years of professional experience, ideally in NYC-based firms, • Strong portfolio demonstrating design excellence, particularly in hospitality or experiential environments, • Proficiency in AutoCAD, Adobe Creative Suite, SketchUp- 3D tools a plus), • Deep understanding of NYC building codes, zoning, and permitting processes, • Excellent communication, leadership, and organizational skills, • Ability to manage multiple projects and deadlines effectively Ideal Candidate • Passionate about hospitality driven design and user experience, • Detail oriented with strong technical problem-solving skills, • Confident leading teams and interfacing with clients, • Collaborative, proactive, and design-focused, • Experience seeing projects through construction and installation This position is in person in our NYC office Mon-Thursdays, Fridays are remote. All candidates must be able to easily commute and accommodate this schedule. Only applications that have resumes and relevant work examples/portfolios will be considered.

Our client, a Premier Packaging Design Agency in New York City, is seeking a creative Packaging Designer with at least 3-4 years of structural packaging experience. The ideal candidate will have a strong background in structural design, with a keen eye for detail and a passion for creating innovative and functional packaging solutions. They are looking for a candidate who is motivated, a natural leader with meticulous organizational skills, has a great working attitude and stellar work ethic. Candidates must be able to work well with others and under pressure meeting tight deadlines. RESPONSIBILITIES: • Design and develop innovative structural packaging solutions for a variety of products., • Able to conceptualize package designs, create and present prototypes and mock-ups for internal reviews and client presentations., • Generate packaging die-lines and templates for new packaging inquiry., • Generate and update design files with detailed dimensions and material information., • Utilize 2D and 3D software and other design tools to produce detailed technical drawings and specifications., • Distribute design files for development and collaborate with the Accounts and Production team to ensure seamless communication and project alignment., • Have a strong understanding of structures and all variables that affect the structural integrity and overall design of a project., • Identify suitable packaging materials and conducting feasibility studies, • Manage the entire design process from conception to final production., • Check pre-production/ final production samples and address any product issues or challenges in a timely manner., • Assist Design Team and Design Director on daily tasks., • Always a productive participant looking for ways to improve or propose solutions to existing processes or structure., • Have a strong understanding of current market trends in packaging, materials/technologies that can be used in packaging., • Brainstorming packaging ideas using hand sketches, verbal cues, words, and design software., • Proofread and revise designs for errors., • Responsible for maintaining quality standards and consistency for the company and brand's packaging and brand identity., • Strong eye for design, page composition and layout, typography, and colour theory, • Knowledge of press and printing processes, • Collaborates closely with clients, stakeholders, and other departments to ensure alignment with organizational objectives., • Maintains a keen sense of urgency, serving as a bridge between the design team, other departments, and senior management throughout the process. Proactively stays informed about critical deadlines and requirements, facilitating effective communication and ensuring timely delivery of project milestones., • Manage multiple projects simultaneously, prioritize tasks effectively, and meet project deadlines and brand specifications without compromising quality., • Able to lead the junior members of the team in the creation and execution of packaging concepts from ideation to final production, while providing guidance, inspiration, feedback and support to the team., • Reports to senior members of the team and management within the organization as necessary. QUALIFICATIONS: • Bachelor’s degree in packaging design, industrial design, graphic design, art, or a similar field with at least 3-4 years of packaging experience, • Ability to create initial specs and generate design files, • Knowledgeable with the product development process, • Quick learner with ability to take direction, • Strong attention to detail, • Strong illustration skills and rendering skills., • Natural talent for design and a keen eye for detail., • Strong time management, organizational, and problem-solving skills, • Excellent written, verbal communication skills, and work ethic, • Proficient in Microsoft Office Suite (i.e. Excel, Word, PowerPoint) and Adobe Creative Suite (i.e. Keynote, Photoshop, Illustrator, InDesign) Rhino, Keyshot or other similar design software., • Experience with market research and familiarity with various packaging material EQUAL OPPORTUNITY STATEMENT: Elysian Staffing is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity or expression, age, national origin, disability, veteran status, or any other legally protected status. All employment decisions are based on qualifications, merit, and business needs. (For NYC jobs or location with salary transparency laws) Salary Range: $60-80k

The Technical Development Designer will focus on our intimates and sleepwear business and is responsible for translating creative concepts into production-ready garments. This role will be focused on development and will partner closely with Design, Product Development, Merchandising, and Production teams to ensure fit integrity, construction excellence, comfort performance, and brand-right execution across bras, underwear, shapewear, loungewear, and sleep categories. This position requires expertise in intimate apparel construction, fit standards, grading, fabric performance, and 3D development tools. Responsibilities: • Own technical development from concept through 1st fit approval for intimates and sleep categories, • Interpret design intent and establish technical construction standards that deliver superior fit, comfort, and support, • Create and maintain detailed Tech Packs including specs, construction callouts, grade rules, and fit comments, • Lead fit sessions on live models and mannequins; provide clear and actionable feedback to vendors, • Develop and approve graded specs, ensuring consistency across size ranges (missy, extended, plus, etc.), • Collaborate with Design to problem-solve aesthetic and performance challenges while maintaining cost targets, • Partner with vendors to troubleshoot pattern, fabric, trim, and construction issues, • Evaluate fabric performance (stretch, recovery, shrinkage, hand feel) specific to intimate and sleep categories, • Oversee prototype development, 3D sampling, and virtual fit review when applicable, • Maintain fit blocks and ensure seasonal updates align with brand standards, • Support wear testing and provide technical recommendations for product improvements, • Ensure compliance with quality standards and production timelines Qualifications: • Bachelor’s degree in Fashion Design, Technical Design, or related field, • 5+ years of technical design/development experience, with strong focus in intimates and/or sleepwear, • Deep understanding of bra construction, elastics, support systems, stretch fabrics, lace application, and seam engineering, • Strong knowledge of grading for intimate categories, • Proficiency in Adobe Illustrator and PLM systems, • Experience with 3D tools (Browzwear, CLO, or similar) preferred, • Strong garment fitting skills and pattern knowledge, • Excellent communication and vendor management skills, • Highly detail-oriented with strong organizational abilities Annual salary range starting at $90,000+ The disclosed salary is commensurate with experience and does not reflect the total compensation package. Our associates have access to other valuable benefits that our Human Resources team is happy to share with candidates during the interview process.

Our client, a popular wholesale watch brand, is seeking a Watch Designer to join their team in Paramus, NJ! *This role is onsite 3x per week in Paramus, NJ Responsibilities: • Partner with design team to apply concepted materials and color palettes to seasonal collections, • Conceptualize and design watch collections, • Adhere to Brand standards and designs, • Create and present designs that adhere to line plan and costing, • Develop spec packs and line extensions, • Use illustrator and 3D, • Make design concept presentations Requirements: • Bachelor's Degree in related field, • 4-7+ years of watch design experience, • Excellent sketching and rendering skills, • Strong computer skills, • Proficient in 2D and 3D software, • Knowledge of competitive brand landscape, • Knowledge of product lines and technical watch construction, • Strong communication and presentation skills If this sounds like a fit, please submit your resume for immediate consideration! We suggest that you ensure you have updated your LinkedIn profile and that you start collecting your references early. You can use www.workgrades.com to collect and manage your references for free, and share them with us or anyone else you choose.

Our client, a leading global retailer, is seeking an Associate Designer to join their women’s apparel design team based in New York City. This role is ideal for a highly organized, technically strong, and creative design professional with experience supporting women’s woven and cut-and-sew categories. The position will work closely with senior leadership on seasonal development, technical design execution, CAD creation, and product development initiatives. The ideal candidate has worked on: • Women’s woven and cut-and-sew apparel, • Technical flat sketching and tech pack development, • CAD presentations, print layouts, and artwork placement, • Garment construction, fit, and apparel development processes, • Cross-functional collaboration with merchandising, production, and overseas partners Key Responsibilities: • Create hand sketches and fashion croquis to communicate design concepts and silhouettes, • Develop detailed Adobe Illustrator flat sketches for development and production, • Assist in creating and maintaining comprehensive tech packs, • Support seasonal product development across multiple apparel classifications, • Create CADs, embroidery layouts, artwork concepts, and presentation materials, • Organize line sheets, development files, and seasonal design materials, • Ensure accuracy and consistency across all development documents, • Support special design initiatives and collaborative team projects, • Manage multiple deadlines within a fast-paced environment, • Utilize or learn emerging AI fashion tools and 3D development technologies Requirements: • Strong hand sketching and fashion illustration ability, • Advanced Adobe Illustrator skills, • Solid understanding of garment construction and apparel development, • Experience creating professional tech packs, • Strong organizational skills and attention to detail, • Excellent communication and collaboration skills, • Ability to thrive in a fast-paced fashion environment Please submit your resume for consideration. You can use WorkGrades to collect and manage your references for free and share them with us or anyone else you choose by visiting _. Candidates with references are always preferred by our clients. Now is the most important time to stand out from the crowd. We suggest that you ensure you have updated your LinkedIn profile and that you start collecting your references early.

Our client, a fashion brand, is seeking a Technical Designer to join their Jewelry/ Hardware team on a contract basis in their New York office. Responsibilities: • Execute technical specifications for hardware development, • Complete and update tech packs for factory hand off, • Thoroughly review all vendor technical specs and apply clear and concise feedback, • CAD support through Illustrator and Rhino renderings based on conceptual direction, • Trouble shoot and provide technical guidance to hardware Design Team, • Organized file saving processes for designs easy reference of materials like specs, vendor technical designs and 3D files., • Assist in communication between PD and design for hardware, • Partner very closely with the Design & Product Development teams Requirements: • BA/BS/BFA degree or equivalent life experience, • Minimum 5-7 years in Technical Design within assigned category, • Experience with PLM (Centric), or other Product Management system, • Proficient in Rhino 3D, Sub D, Z-Brush and Adobe Illustrator, • Strong taste level and design aesthetic, • Strong organizational, interpersonal and negotiation skills, • Able to work in a fluid, fast-paced, multi-channel environment Please submit your resume for consideration. You can use www.workgrades.com to collect and manage your references for free and share them with us or anyone else you choose. Candidates with references are always preferred by our clients. Now is the most important time to stand out from the crowd. We suggest that you ensure you have updated your LinkedIn profile and that you start collecting your references early.

Senior Associate Licensed Land Surveyor/Project Manager US-NY-Mineola Job ID: 2026-3320 of Openings: 1 Category: GIS/Surveyor LiRo GIS and Survey, PC, 235 East Jericho Turnpike, Mineola NY Overview We are seeking a highly experienced and licensed Senior Associate Licensed Land Surveyor/Project Manager to take on a key leadership role within our Long Island operation. This position is ideal for a seasoned professional who brings deep technical expertise, strong project and team leadership, and the ability to independently manage complex surveying assignments. The Senior Associate will serve as a Surveyor of Record, oversee multiple projects and play an integral role in client engagement, operational excellence, and strategic growth initiatives. This individual will be responsible for the development and growth of business relationships across our portfolio of clients, including municipalities, agencies, and private developers. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E and Construction Management firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston, Needham, MA and Edison, NJ. Responsibilities • Serve as Survey Lead on complex and high-profile projects across Long Island and the greater New York region, • Manage multiple concurrent projects, ensuring delivery on schedule, within budget, and to the highest quality standards, • Supervise, mentor, and develop junior surveyors and field crews, • Establish and enforce QA/QC procedures and best practices across all survey operations, • Act as Surveyor of Record, reviewing, signing, and sealing survey documents in accordance with New York State regulations, • Oversee preparation of boundary, topographic, construction, and ALTA/NSPS Land Title Surveys, • Conduct and review complex deed research, title analysis, and boundary determinations, • Resolve challenging survey and title issues with sound professional judgment, • Ensure compliance with all applicable local, county, and state regulations, particularly across New York and Long Island municipalities, • Serve as a primary point of contact for key clients, including developers, engineers, architects, and municipalities, • Support business development efforts, including proposal preparation, scope definition, and fee negotiation, • Identify opportunities for repeat business and contribute to long-term client relationship growth Qualifications • Active New York State Professional Land Surveyor (PLS) license required. New Jersey Professional Land Surveyor (NJ PLS) license a plus., • 10–15+ years of progressive land surveying experience, • Demonstrated experience leading teams and managing complex projects independently, • Strong knowledge of boundary law, survey standards, and construction layout practices, • Extensive familiarity with Long Island municipalities, permitting processes, and regulatory requirements, • Proficiency in industry-standard software (AutoCAD Civil 3D, Carlson, Microstation, or similar), • Excellent leadership, communication, and organizational skills, • Established client relationships or proven business development experience, • Ability to contribute to multi-disciplinary projects (survey + engineering integration) We are committed to your success, and we invest in your growth and development to unlock your full potential. • Competitive Total Compensation Package, • Employee- Only Stock Purchase Plan, • Mentoring programs, • Continuing Education Program, • Employee referral bonus, • Volunteer/Industry association opportunities Our Culture: • We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. We offer a comprehensive benefits package and a positive work environment • Compensation: Minimum: $155,000: Maximum: $185,000 The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates’ qualifications and location., • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 155000-185000 Yearly Salary PI6ac8a0f9582b-37820-40235579

Civil Engineer Opportunity with Industry Leading Firm / $80,000-$120,000 per year depending on Experience / Room for Growth and Excellent Benefits This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $80,000 - $120,000 per year A bit about us: We are an award-winning civil engineering & landscape architecture firm. A multi-disciplinary firm of design professionals including Civil Engineers, Landscape Architects, Planners, Security Consultants, and Surveyors work together in an enjoyable work atmosphere! Project types include mixed-use/transit-oriented design, government facilities, residential, commercial, office, utilities and infrastructure, mission critical/data centers, and more. Extensive experience providing site design for a broad range of private development that includes corporate office, multifamily, urban, mixed-use, and residential development. Additionally, our public sector experience includes the site design of government facilities at the federal, state, and local levels. Why join us? Competitive Compensation $80,000 - $120,000 per year depending on Experience Collaborative team atmosphere; Culture and goal to continue to build on the growth and success Work on exciting and diverse projects of all sizes for both the public and private sectors Job Details We are seeking an experienced Civil Engineer with a strong background in land development design and project management. The ideal candidate will bring technical expertise, leadership skills, and the ability to manage multiple projects from concept through construction for both private and public sector clients. Responsibilities: Lead and perform civil site development design projects, including grading, drainage, stormwater management, utilities, and roadway design. Prepare detailed engineering plans and specifications using AutoCAD Civil 3D. Manage project schedules, budgets, and deliverables while coordinating with clients, regulatory agencies, and multidisciplinary teams. Develop site layouts and infrastructure designs in compliance with applicable codes, standards, and permitting requirements. Provide technical guidance and mentorship to junior engineering staff. Participate in proposal development and client presentations as needed. Requirements: Bachelor’s degree in Civil Engineering (required). 8+ years of civil engineering experience with a focus on land development. Professional Engineer (PE) license or ability to obtain within a reasonable timeframe. Proficiency in AutoCAD Civil 3D. Demonstrated experience in site planning, stormwater management, and infrastructure design. Strong communication, organizational, and problem-solving skills Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Civil Engineering firm with locations in Charleston and Greenville, looking for a Project Manager with 10+ years of experience, mainly within the land/site development space for our Greenville office This Jobot Job is hosted by: Riley Duffy Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $125,000 - $150,000 per year A bit about us: A growing civil and structural engineering firm is hiring. Just named for being one of the top 100 fastest growing A/E firms in the United States. The project manager must work with teams on multiple projects and work with clients to understand their business, their processes and their projects. Growing and creating new client relationships is a key part of this role. The project manager must facilitate the design and permitting process to create a successful project. Our clients include federal, state, and municipal agencies, architects, private developers, educational institutions, medical facilities, aviation clients and more. Flexibility is key and interest in varied project types is paramount. The project manager must thrive in a fast paced, team environment and be comfortable with business development. Why join us? • Potential for bonuses, • 3 weeks PTO, • 9 Holidays, • 401K (100% match of the first 5% contributed), • Health insurance (including vision and dental), • FSA, • Life insurance, • Short-term disability, • Long-term disability, • Tuition reimbursement Job Details Technical requirements: o Bachelor’s degree in civil engineering o PE license with the ability to obtain their SC PE License o Proficiency in Civil 3D with site, grading, and utility design o Experience in K-12, commercial and industrial site design is preferred o Minimum of 10 years of site development experience Management Skills: • Experience managing and collaborating with architectural clients, • Experience managing support staff, • Minimum of 3 years of project management, • Ability to establish relationships with clients, • Ability and willingness to generate work/projects, • Ability to work independently, • Professional communication skills, • Enthusiasm and a drive to exceed expectations Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Civil Engineering firm with locations in Charleston and Greenville, looking for a Project Manager with 10+ years of experience, mainly within the land/site development space for our Greenville office This Jobot Job is hosted by: Riley Duffy Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $125,000 - $150,000 per year A bit about us: A growing civil and structural engineering firm is hiring. Just named for being one of the top 100 fastest growing A/E firms in the United States. The project manager must work with teams on multiple projects and work with clients to understand their business, their processes and their projects. Growing and creating new client relationships is a key part of this role. The project manager must facilitate the design and permitting process to create a successful project. Our clients include federal, state, and municipal agencies, architects, private developers, educational institutions, medical facilities, aviation clients and more. Flexibility is key and interest in varied project types is paramount. The project manager must thrive in a fast paced, team environment and be comfortable with business development. Why join us? • Potential for bonuses, • 3 weeks PTO, • 9 Holidays, • 401K (100% match of the first 5% contributed), • Health insurance (including vision and dental), • FSA, • Life insurance, • Short-term disability, • Long-term disability, • Tuition reimbursement Job Details Technical requirements: o Bachelor’s degree in civil engineering o PE license with the ability to obtain their SC PE License o Proficiency in Civil 3D with site, grading, and utility design o Experience in K-12, commercial and industrial site design is preferred o Minimum of 10 years of site development experience Management Skills: • Experience managing and collaborating with architectural clients, • Experience managing support staff, • Minimum of 3 years of project management, • Ability to establish relationships with clients, • Ability and willingness to generate work/projects, • Ability to work independently, • Professional communication skills, • Enthusiasm and a drive to exceed expectations Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Wanted: Experienced Senior Project Engineer – Civil Engineering in San Diego | CA Registration as a Professional Civil Engineer required This Jobot Job is hosted by: Stephen Niedringhaus Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $160,000 - $180,000 per year A bit about us: Wanted: Experienced Senior Project Engineer – Civil Engineering in San Diego CA Registration as a Professional Civil Engineer is required Join a respected leader in civil and land development engineering with a legacy of shaping communities across Southern California. As a Senior Project Engineer in our client's San Diego office, you’ll work alongside a multidisciplinary team of experts on landmark projects that make a lasting impact. This is an opportunity to lead with purpose, mentor emerging talent, and help clients and communities turn their vision into reality. Our client is an award-winning, multi-disciplinary firm providing civil, transportation, and environmental engineering, planning, and surveying services throughout the Western United States. With a reputation built on integrity, innovation, and client success, our client continues to shape communities and infrastructure that stand the test of time. Interested? Please continue reading. Interviews are going on now. Apply today! Why join us? You’ll find a culture that values technical excellence, teamwork, and professional growth. Our client is committed to supporting your career development while offering a collaborative, flexible environment that fosters both professional and personal success. • Competitive compensation and annual bonus potential - $160,000-$180,000, • Comprehensive benefits: Medical, Dental, Vision, Life, and Disability Insurance, • 401(k) and Profit Sharing Plan, • Paid Time Off and Personal Leave, • Alternative Work Schedule (9/80) for work-life balance, • Ownership opportunity potential, • Fun, team-oriented environment with holiday events, team-building activities, and mentorship programs Job Details What You’ll Do • Lead/manage the planning, design, and execution of private and public infrastructure and land development projects., • Oversee project schedules, budgets, contracts, and technical staff, ensuring the successful delivery of high-quality work., • Prepare and review civil engineering designs, bid documents, regulatory plans, and construction support materials., • Engage directly with clients, public agencies, and stakeholders to foster strong, long-term relationships., • Contribute to business development efforts through proposal writing, fee estimates, and client presentations., • Mentor and guide junior engineers and designers while promoting a collaborative and supportive team culture. What You Bring • Bachelor’s degree in Civil Engineering (required)., • California Professional Engineer (P.E.) license (required)., • 15+ years of directly relevant experience in civil engineering (or 18 years total industry experience)., • 5+ years of management experience, including supervision of technical teams., • Strong background in land development, public works, and infrastructure design., • Local experience in San Diego County and California jurisdictions strongly preferred., • Expertise with AutoCAD Civil 3D., • Proven ability to manage client relationships, budgets, schedules, and technical deliverables., • Active participation in professional and community organizations is encouraged. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Brand New Civil/Environmental Engineer Opening With Leader In Land Development, Utilities and Drainage Design! This Jobot Job is hosted by: Brian Perkins Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $70,000 - $130,000 per year A bit about us: • Strong Benefits, • Great Company Culture, • Family Atmosphere, • Limitless Growth Potential, • Flexible Schedule, • Profit Sharing, • Strong Yearly Bonuses Why join us? We help clients meet their environmental compliance goals and obligations through tailor-made environmental solutions. We are here to help organizations confidently navigate the complicated environmental regulatory landscape and meet their business objectives. Learn more. Job Details Responsibilities will include but are not limited to the design and permitting of construction plans for site layout, grading, drainage, erosion control, stormwater treatment and conveyance, water and sewer, roadway, pump station and force main design. This individual will also provide technical and design services in support of civil engineering projects reporting directly to their project manager. Applicant must be able to communicate and coordinate technical evaluations and designs, produce reports in technical writing format, and correspond with other team members to complete work in a timely and efficient manner. Must have the ability to coordinate project submittals, facilitate regulatory agency approvals, and obtain construction permits. Experience: Bachelor of Science Degree in Civil or Environmental Engineering. Professional Engineering License Required Experience with AutoCAD Civil 3D and Microsoft Office required. Hydraflow Storm Sewer, Hydrograph, and WaterCad preferred. Must have strong communication and writing skills. Experience with design of land development projects preferred. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description MICRO CENTER is the nation’s leading computer and electronics big box retailer, offering more than 40,000 top technology products. For over 45 years, our success has been driven by unmatched expertise, a passion for innovation, and a steadfast commitment to exceptional customer service. Joining Micro Center means more than working in retail—it’s an opportunity to be at the forefront of fast-growing tech, including edge AI, advanced 3D printing, robotics, and emerging maker solutions shaping the future. At Micro Center, Passion, Energy, and Commitment aren’t just words—they’re how we work, grow, and win together. We take pride in creating long-term customer relationships and cultivating a workplace where associates are supported, empowered, and valued. Our teams play a hands-on role in bringing complex and cutting-edge solutions to life for our customers, making technology approachable and impactful every day. Salary range is $65,000 - $72,000 Click here to view our job video MAJOR RESPONSIBILITIES: • Maintain orderly operation and safety of all areas of responsibility; ensure that service policies and procedures are being properly carried out at the store level, • Consistently achieve customer satisfaction, sales, productivity, payroll and expense goals of the service repair shop, • Maintain fiscal and operational controls including planning and managing departmental budget (Service Department P&L), • Through Service Department leadership, ensure all customer and/or computer issues are resolved in a timely manner and in alignment with company policy, • Ensure customers are served promptly and courteously and that customer satisfaction standards are met, • Work effectively through associates to achieve desired results regarding customer satisfaction, sales, productivity and technical solutions, • Ensure associates maintain appropriate technical certifications (CompTIA A+ and Apple Certification) to enable proper service of products, • Participate in and lead open and close procedures, to include freight flow and merchandise processing as well as tracking of company assets through inventory control, • Serve as manager-in-charge during absence of General Manager or other store managers, • Ensure the execution of ad set and visual merchandising standards, • Manage staffing, orientation and training to ensure competent and certified associates are hired, trained and scheduled to properly service our customers, • Develop and coach associates in the areas of customer satisfaction, product knowledge, solution selling and standard operating procedures; ensure goals and results are communicated, • Ensure human resource issues are handled in accordance with guidelines; partner with Regional HR Manager and Store Manager when needed, • Perform other duties and tasks as assigned EDUCATION & EXPERIENCE: • 5+ years of leadership experience with a major big box retailer in a high-volume, 30,000+ square-foot store, preferably in a productivity-based computer or technology service and repair environment, • Previous experience in all aspects of retail management: driving sales, merchandising, operations, freight flow and technical customer service, • Experience in human resources functions and capable of hiring, retaining and coaching qualified employees, • Ability to execute corporate initiatives and analyze the competition, • A college degree is preferred, • Physical requirements: lift up to 50 lbs., stand for prolonged periods of time, • Shifts include hours after and after the store is open to the public and may also include mornings, nights, weekends and holidays, • Experience within the consumer electronics industry is strongly preferred, with direct accountability for achieving P&L and customer satisfaction targets MICRO CENTER OFFERS EXCEPTIONAL BENEFITS: • Medical, Dental and Vision Benefits Coverage for Regular Full-Time Associates, • Employee Discount that includes a Friends & Family Discount Program, • Tuition Reimbursement & Education Discounts, • Paid Time Off for Regular Associates, • 401K Plan with Company Match, • Esteemed Vendor & Company Job Training, • Career Advancement Opportunities Why Micro Center Our core promise is to take care of our associates and our customers. That commitment has guided our culture, our growth, and our success for more than four decades—and it’s what makes Micro Center a truly exceptional place to build your career. Micro Center is an Equal Opportunity Employer.

Job Description MICRO CENTER is the nation’s leading computer and electronics big box retailer, offering more than 40,000 top technology products. For over 45 years, our success has been driven by unmatched expertise, a passion for innovation, and a steadfast commitment to exceptional customer service. Joining Micro Center means more than working in retail—it’s an opportunity to be at the forefront of fast-growing tech, including edge AI, advanced 3D printing, robotics, and emerging maker solutions shaping the future. At Micro Center, Passion, Energy, and Commitment aren’t just words—they’re how we work, grow, and win together. We take pride in creating long-term customer relationships and cultivating a workplace where associates are supported, empowered, and valued. Our teams play a hands-on role in bringing complex and cutting-edge solutions to life for our customers, making technology approachable and impactful every day. We are currently seeking a self-motivated, results-oriented Retail Store General Manager. At Micro Center, our core promise is to take care of our associates and customers—a commitment that continues to drive our success. If you’re energized by innovation and excited to lead in an environment centered on the future of AI, robotics, and next-generation technology, this is your opportunity to grow your career at the intersection of retail and innovation. Salary range of $80K- $120K Plus Bonus MAJOR RESPONSIBILITIES: • Consistently achieve store sales and profit objectives, including management of payroll expenses, • Develop and implement plans to increase profitability and reduce expenses based on P&L results, • Identify, effectively communicate and resolve store issues, informing appropriate District and Home Office personnel as needed, • Execute and participate in floor and front-end leadership activities, including store open and close procedures, • Manage all freight flow and processing as well as appropriate tracking of company assets through inventory control, • Ensure the execution of ad set and visual merchandising standards, • Direct, monitor and manage staffing and training to ensure competent associates are hired, trained and scheduled to properly service our customers, • Train, develop and coach all store personnel -- from Senior Managers to front line associates -- in the areas of standard operating procedures, customer satisfaction and solution selling, • Ensure human resource issues are handled in accordance with guidelines; partner with Regional HR Manager and Home Office HR when needed, • Perform other duties and tasks as assigned EDUCATION & REQUIREMENTS: • 7+ years of leadership of experience with a major big box retailer in a high-volume, 30,000+ square-foot store, with at least 100 employees and accountability for profit and loss, within the consumer electronics industry preferred, • Previous experience managing your own store and experience in all aspects of retail management: driving sales, merchandising, operations, freight flow and customer service, • Experience in human resources functions and capable of hiring, retaining and coaching qualified employees and managers, • Ability to execute corporate initiatives and analyze the competition, • Physical requirements: lift up to 50 lbs., stand for prolonged periods of time, • Shifts include hours after and after the store is open to the public and may also include mornings, nights, weekends and holidays, • A college degree is strongly preferred MICRO CENTER OFFERS EXCEPTIONAL BENEFITS: • Medical, Dental and Vision Benefits Coverage for Regular Full-Time Associates, • Employee Discount that includes a Friends & Family Discount Program, • Tuition Reimbursement & Education Discounts, • Paid Time Off for Regular Associates, • 401K Plan with Company Match, • Esteemed Vendor & Company Job Training, • Career Advancement Opportunities Why Micro Center Our core promise is to take care of our associates and our customers. That commitment has guided our culture, our growth, and our success for more than four decades—and it’s what makes Micro Center a truly exceptional place to build your career. Micro Center is an Equal Opportunity Employer.

Our client, a boutique agency, is looking for a Graphic Designer with solid 2D and 3D skills to join their team. This role is primarily remote, but candidates must be based in the tri-state area for monthly onsite days. The ideal candidate is highly conceptual, with a portfolio that showcases strong display work and renderings. Responsibilities: • Work on designing assets for retail and eCommerce across print, digital, and POP / POS high-end displays, • Create renderings for displays, • Design, edit, resize, reshape all assets for the brands with a conceptual approach and luxury design sensibility using excellent type and layout, • Jumping in on a range of other design projects as well, such as page layouts, brochures, web assets etc., • There will be some conceptual design work and some templated/following design brand guidelines as needed, • Must have the ability/comfort to be collaborative with the team, share ideas, and present design ideas/updates, etc., • You will focus on clients within the wine and spirits industry Requirements: • 2-3 years of design experience, ideally with retail, eCommerce, and a luxury design sense (bonus for any spirits experience), • Incredible layout skills, • Strong conceptual design skills, • 2D and 3D design experience, • Must be proficient with the Creative Suite, especially Photoshop, Illustrator, and InDesign, • Have a keen eye for typography as well as photography, focusing on a luxury aesthetic, • Be comfortable working collaboratively with a creative team, as well as independently in a fast paced environment, • Have an eager can-do attitude, ready to roll up your sleeves and help out wherever needed! In this position, you may have access to client or customer systems, confidential and/or proprietary information or data. This position is onsite and requires you to work closely with other individuals in a collaborative team environment. Benefits Creative Circle's Freelance Employee benefits package includes eligibility for Minimum Essential Coverage (MEC) medical plan, dental/vision/term life package, discount prescription program, critical illness, accident, tele-behavioral health, and 401(k) plan. Sick leave is provided to Candidates whose assignment _ is in a state or city subject to sick leave laws. A Minimum Value (MV) PPO medical plan, Employee Stock Purchase Plan, and paid holiday eligibility are based on length and dates of service. Email Your Resume In Word To clittle@creativecircle.com Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply. Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : CL9-1988465L331 -- in the email subject line for your application to be considered. Cameron Little - Senior Recruiter For Creative Circle to represent you for this opportunity, you must be currently authorized to work in the United States without the need of employer sponsorship for a non-immigrant visa such as a H-1B, TN, or O visa. We do not support or provide training for STEM/OPT programs. Additionally, you must be physically located in and perform the work for our client in the United States.This is a new role. This job was first posted by Creative Circle on 06/01/2026 and applications will be accepted on an ongoing basis until the position is filled or closed. This job was posted on 06/01/2026 and is open for 60 days Everforth Creative Circle is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, disability, status as a crime victim, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. Everforth Creative Circle will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. If you need a reasonable accommodation in the application process, please contact your Recruiter (the person you'll be interviewing with) or a member of our Human Resources team to make arrangements. Anthem / Blue Cross Blue Shield creates and publishes the Transparency in Coverage Machine-Readable Files on behalf of Everforth Creative Circle. Copyright © 2026 Everforth, Inc. All rights reserved.