Trabajos automation en Vineland, New JerseyCrear alertas

Job Description Position Overview: This role involves the maintenance, repair, and enhancement of machinery utilized in food manufacturing processes. The main emphasis is on the upkeep and documentation of electrical and control systems, addressing both hardware and software aspects to ensure efficient production operations. Key Responsibilities: • Maintain current documentation for all electrical and control systems., • Assist Mechanics and Electro-Mechanics in diagnosing and resolving electrical or control-related issues., • Provide training and coordinate the activities of Electro-Mechanics across all shifts as needed., • Occasionally work offsite to support equipment troubleshooting and repairs., • Ensure production equipment is maintained according to the production schedule., • Conduct electrical and mechanical inspections safely while equipment is operational., • Address corrective, preventive, or scheduled repairs during equipment downtime following company and vendor specifications., • Work independently or with a mechanic to identify and rectify equipment failures, restoring production promptly., • Complete tasks in adherence to government regulations, GMP, safety standards, quality control measures, and company procedures., • Perform preventive, scheduled, or corrective maintenance on batching and continuous process control systems, including networks, AC/DC and servo drives, pneumatics, hydraulics, and mechanical components., • Maintain secondary systems for steam, hot and chilled water, pneumatic air, electrical power, refrigeration, HVAC, and emissions control., • Keep accurate work records in accordance with work orders, backlog, and job assignment systems., • Carry out other assigned duties as required, which may include travel for parts procurement, training, or additional responsibilities., • Aim to enhance the quality, legality, and safety of products and manufacturing processes., • Ensure the assigned work area is clean and organized, reporting any potential contamination or suspicious activities to a Supervisor immediately. Qualifications: • AS/AAS degree in Electrical/Electronic Engineering preferred or equivalent experience., • High school/military training and practical experience in a related field, with a background in complete machine and electrical control system installation., • Familiarity with Rockwell, Siemens, and Mitsubishi software, as well as preventive maintenance software, is preferred., • Ability to read and interpret electrical, mechanical, instrumentation, and control systems design documentation., • Working knowledge of control system projects, including machine layout, control drawings, P&ID, and basic troubleshooting for A/B-Rockwell, Siemens, and Mitsubishi., • Ability to perform basic and advanced mathematical calculations, converting units of measurement., • Competent in completing forms detailing maintenance work performed., • Proficient in reading and interpreting work orders, operating manuals, and maintenance instructions.

Job Description Position Overview: This role involves the maintenance, repair, and enhancement of machinery utilized in food manufacturing processes. The main emphasis is on the upkeep and documentation of electrical and control systems, addressing both hardware and software aspects to ensure efficient production operations. Key Responsibilities: • Maintain current documentation for all electrical and control systems., • Assist Mechanics and Electro-Mechanics in diagnosing and resolving electrical or control-related issues., • Provide training and coordinate the activities of Electro-Mechanics across all shifts as needed., • Occasionally work offsite to support equipment troubleshooting and repairs., • Ensure production equipment is maintained according to the production schedule., • Conduct electrical and mechanical inspections safely while equipment is operational., • Address corrective, preventive, or scheduled repairs during equipment downtime following company and vendor specifications., • Work independently or with a mechanic to identify and rectify equipment failures, restoring production promptly., • Complete tasks in adherence to government regulations, GMP, safety standards, quality control measures, and company procedures., • Perform preventive, scheduled, or corrective maintenance on batching and continuous process control systems, including networks, AC/DC and servo drives, pneumatics, hydraulics, and mechanical components., • Maintain secondary systems for steam, hot and chilled water, pneumatic air, electrical power, refrigeration, HVAC, and emissions control., • Keep accurate work records in accordance with work orders, backlog, and job assignment systems., • Carry out other assigned duties as required, which may include travel for parts procurement, training, or additional responsibilities., • Aim to enhance the quality, legality, and safety of products and manufacturing processes., • Ensure the assigned work area is clean and organized, reporting any potential contamination or suspicious activities to a Supervisor immediately. Qualifications: • AS/AAS degree in Electrical/Electronic Engineering preferred or equivalent experience., • High school/military training and practical experience in a related field, with a background in complete machine and electrical control system installation., • Familiarity with Rockwell, Siemens, and Mitsubishi software, as well as preventive maintenance software, is preferred., • Ability to read and interpret electrical, mechanical, instrumentation, and control systems design documentation., • Working knowledge of control system projects, including machine layout, control drawings, P&ID, and basic troubleshooting for A/B-Rockwell, Siemens, and Mitsubishi., • Ability to perform basic and advanced mathematical calculations, converting units of measurement., • Competent in completing forms detailing maintenance work performed., • Proficient in reading and interpreting work orders, operating manuals, and maintenance instructions.

Job Description Position Overview: This role involves the maintenance, repair, and enhancement of machinery utilized in food manufacturing processes. The main emphasis is on the upkeep and documentation of electrical and control systems, addressing both hardware and software aspects to ensure efficient production operations. Key Responsibilities: • Maintain current documentation for all electrical and control systems., • Assist Mechanics and Electro-Mechanics in diagnosing and resolving electrical or control-related issues., • Provide training and coordinate the activities of Electro-Mechanics across all shifts as needed., • Occasionally work offsite to support equipment troubleshooting and repairs., • Ensure production equipment is maintained according to the production schedule., • Conduct electrical and mechanical inspections safely while equipment is operational., • Address corrective, preventive, or scheduled repairs during equipment downtime following company and vendor specifications., • Work independently or with a mechanic to identify and rectify equipment failures, restoring production promptly., • Complete tasks in adherence to government regulations, GMP, safety standards, quality control measures, and company procedures., • Perform preventive, scheduled, or corrective maintenance on batching and continuous process control systems, including networks, AC/DC and servo drives, pneumatics, hydraulics, and mechanical components., • Maintain secondary systems for steam, hot and chilled water, pneumatic air, electrical power, refrigeration, HVAC, and emissions control., • Keep accurate work records in accordance with work orders, backlog, and job assignment systems., • Carry out other assigned duties as required, which may include travel for parts procurement, training, or additional responsibilities., • Aim to enhance the quality, legality, and safety of products and manufacturing processes., • Ensure the assigned work area is clean and organized, reporting any potential contamination or suspicious activities to a Supervisor immediately. Qualifications: • AS/AAS degree in Electrical/Electronic Engineering preferred or equivalent experience., • High school/military training and practical experience in a related field, with a background in complete machine and electrical control system installation., • Familiarity with Rockwell, Siemens, and Mitsubishi software, as well as preventive maintenance software, is preferred., • Ability to read and interpret electrical, mechanical, instrumentation, and control systems design documentation., • Working knowledge of control system projects, including machine layout, control drawings, P&ID, and basic troubleshooting for A/B-Rockwell, Siemens, and Mitsubishi., • Ability to perform basic and advanced mathematical calculations, converting units of measurement., • Competent in completing forms detailing maintenance work performed., • Proficient in reading and interpreting work orders, operating manuals, and maintenance instructions.

Job Description Location: This position is on-site in Swedesboro, NJ. Please apply only if you live within 30 miles of Swedesboro. Industrial Maintenance Technician – 3rd Shift EAS Direct Hire is seeking an experienced Industrial Maintenance Technician for a high-volume manufacturing facility. This hands-on position is responsible for troubleshooting, repairing, and maintaining production equipment to maximize uptime and support safe, reliable operations. Shift and Compensation • Shift: 3rd Shift, • Hours: 10:00 PM–6:30 AM, • Weekend availability: Required, • Hourly pay: $36.00–$37.25, based on experience Key Responsibilities • Perform advanced preventive, scheduled, and corrective maintenance on production equipment., • Diagnose and repair electrical, mechanical, hydraulic, pneumatic, plumbing, and PLC-related problems., • Complete or assist with major equipment overhauls, system rebuilds, and equipment installations., • Work closely with production personnel and outside contractors to coordinate repairs and minimize operational disruptions., • Safely operate forklifts, lifts, power tools, diagnostic equipment, and other maintenance machinery., • Accurately document completed work, equipment conditions, and maintenance activities in the computerized maintenance management system., • Communicate equipment issues, repair status, and follow-up needs electronically with maintenance and production team members., • Maintain clean, safe, and organized maintenance work areas., • Follow all GMP requirements, safety procedures, company policies, and applicable regulatory standards. Minimum Qualifications • High school diploma or equivalent., • At least three years of mechanical and/or electrical maintenance experience involving industrial or manufacturing machinery, or five years of equivalent relevant experience., • Ability to read and interpret P&IDs, electrical schematics, mechanical diagrams, equipment manuals, and machine layout drawings., • Experience in at least two of the following areas:, • Electrical systems, • Mechanical systems, • Refrigeration, • Plumbing, • Food-manufacturing process controls, • Knowledge of industrial equipment setup, functionality, operating procedures, troubleshooting, and preventive maintenance practices., • Ability to prioritize multiple assignments, plan work effectively, and respond to urgent equipment issues., • Must be at least 18 years old., • Must be available to work the third-shift schedule and weekends as required.

Job Description Core Accountabilities (What You’ll Be Doing) • Operate and maintain utility systems—including ammonia refrigeration, HVAC, boilers, and compressed air—to ensure continuous facility operations, • Troubleshoot mechanical, electrical, plumbing, pneumatic, and hydraulic issues to minimize downtime, • Perform preventative maintenance and equipment inspections to ensure reliability and compliance, • Monitor and optimize equipment performance, including energy efficiency of ammonia compressors and boiler systems, • Maintain safety, environmental, and regulatory compliance, including PSM/RMP documentation and GMP standards, • Coordinate internal and external resources to complete maintenance activities and support system uptime, • Support emergency response efforts involving hazardous materials and utility system failures Minimum Qualifications (What You Bring to the Table) • Blue Seal, • Ammonia experience, • Boiler experience

Job Description Mechanical, Electrical, and Plumbing Technician DataOne – Vineland, New Jersey, United States (On-site) Job Title: Critical Facility Engineer - Mechanical / Electrical Job Description: The Data Center Facility Operations Engineer ensures optimal performance of the building infrastructure by maintaining and troubleshooting critical systems including mechanical, electrical, plumbing, and HVAC. This role supports uninterrupted operation of mission-critical equipment in high-availability environments, responding swiftly to incidents, and conducting preventative maintenance safely and efficiently. This position involves both hands-on work and coordination with internal stakeholders, vendors, and automation platforms. This is a physically hands-on technician role. The successful candidate will be actively involved in the day-to-day maintenance and operation of critical facility systems while working with mechanical, electrical, plumbing, and HVAC equipment. There is significant opportunity for career growth and advancement within DataOne for individuals who demonstrate strong technical aptitude and performance. Key Responsibilities Operations & Maintenance: • Electrical equipment including switchgear, breakers, UPS, ATS, transformers and generators., • Mechanical infrastructure including chillers, dry coolers, FHU, CDU, CRAH units, and HVAC systems., • Inspect and service mechanical components such as pumps, motors, heat exchangers, valves, and associated controls., • Plumbing systems including domestic water supply, chiller plant, and associated pipes, valves and in-rack liquid cooling components., • Perform routine hands-on maintenance tasks including changing air filters, cleaning pump strainers, replacing pumps or pump shaft seals, replacing condenser fan motors, and replenishing salt in water softeners., • Perform general facility cleaning and housekeeping as needed to maintain a safe, organized, and efficient operating environment. Preventative & Predictive Maintenance: • Execute and optimize PM programs using CMMS tools., • Analyze performance trends for early detection of degradation or failure., • Interface with OEMs and vendors for calibration, diagnostics, and part replacements. Troubleshooting & Incident Response: • Lead diagnostics during infrastructure faults; complete root cause analysis reports., • Escalate issues as needed and support incident resolution within SLA parameters., • Document all technical findings, repair actions, and risk mitigation steps. Compliance & Vendor Coordination: • Ensure operations adhere to local code, internal policy, and manufacturer specifications., • Escort vendors, review scope of work, and verify completion., • Participate in audits, fire/life safety inspections, and sustainability reporting. Continuous Improvement & Safety: • Identifying and Addressing Safety Hazards., • Standardizing procedures and practicing emergency response plans., • Support commissioning and integrated systems testing. This opportunity is a full-time onsite position supporting a 24/7 Tier III mission-critical facility and requires a 12-hour rotating shift schedule with an on-call rotation. Requirements • Education – High school diploma or GED required; technical training or trade certification highly preferred (electrical, HVAC, plumbing, or mechanical)., • Journeyman or Master License in Electrical or Mechanical., • Experience – 2–4 years in facility maintenance, preferably in data centers, hospitals, or manufacturing., • Skills – Hands-on troubleshooting, vendor coordination, change management support, ability to read schematics and technical diagrams, and willingness to perform physically demanding maintenance tasks in a mission-critical environment., • Certifications – EPA Universal (for HVAC), Electrical Journeyman license, OSHA 10/30, NFPA-70E, trade certifications (plumbing or mechanical). Training & Development Opportunities • Factory training for major OEM systems: Square D, Schneider, Liebert/Vertiv, Trane, Carrier., • CMMS and ticketing system platforms., • Safety systems: confined space entry, arc flash protection, lockout/tagout protocols., • Electrical/mechanical cross-training and simulation-based drills for incident response.

Who are we? Accelerator is Mars Snacking's growth engine, focused on unlocking growth across high-potential categories and brands. Within Accelerator, the Better For You portfolio includes KIND®, RXBAR®, Nutri-Grain®, Special K Bars®, and Pure Organic® and within Tasty & Wholesome, the portfolio includes Eggo, Rice Krispies Treats, Pop Tarts, and MorningStar Farms. Combining the scale of Mars with the agility of a growth business, we are driving innovation, accelerating performance, and transforming how we work through data, automation, and AI-enabled solutions. We’re looking for passionate collaborators to help us become the foremost leader in Mars Snacking and positively impact society along the way. If you’re looking to be a part of an inspiring, energetic and entrepreneurial environment, you’ve found the right place. What you’ll do Reporting to the Maintenance Supervisor, the Industrial Maintenance Mechanic supports the Blue Anchor, NJ Maintenance Team for the Accelerator business—the division supporting KIND, Tru Fru, Nature's Bakery, and the newly acquired Kellanova brands. The role is responsible for performing preventive maintenance, troubleshooting and repairing mechanical and electrical equipment, supporting equipment reliability, and ensuring manufacturing operations run safely and efficiently with minimal downtime. As the Accelerator division continues to evolve, this role will support operational excellence by maintaining critical production equipment, responding to equipment performance issues, and contributing to continuous improvement efforts across the facility. We currently have openings on our day and night shift teams with a starting rate of $30.34. New Jersey State Refrigeration/Boiler Licenses will be paid an additional per hour as follows: Black/Blue $1.50; Black/Blue/Red $3.00; Black/Blue/Red/Gold $4.50. New hires have one year from their hire date to obtain license from the State of NJ Department of Labor and Workforce Development. A Taste of What You’ll Be Doing • Conducting Preventative Maintenance – Perform basic troubleshooting, repairs and preventative maintenance on mechanical and electrical equipment – your excellence will be the key to keeping production moving smoothly., • Ensuring Performance Efficiency – Manage machine performance by doing equipment set-up and change-overs. You’ll facilitate production and quickly respond to equipment breakdowns., • Following Best Practices – Understand, follow and enforce all established guidelines. Your attention to detail will ensure compliance with all safety, health, quality and company policies, procedures and recognized practices. You’ll help us keep delivering success, one waffle at a time. We’re Looking for Someone With • High school diploma or GED., • Effective communication, interpersonal and organizational skills., • Ability to sit, stand, walk, lift up to 50 lbs and complete repetitive tasks throughout the day., • Experience with troubleshooting, repairs, and preventative maintenance on mechanical and electrical equipment in a manufacturing setting. What’s Next After you apply, your application will be reviewed by a real recruiter, so it may take us a few weeks to get back with you by email or phone. If you join our team, you’ll be rewarded for the difference you make. Our comprehensive benefits offer you the support you need through your life events, big or small. All applicants must have permanent legal authorization to work in the United States. Kellanova does not sponsor employment visas for this role. Benefits include medical, dental, vision, life, accidental death & dismemberment insurance, employee assistance program, short-term disability coverage, and long-term disability insurance. Also, voluntary income protection benefits such as supplemental life, accident as well as a 401(k) plan with company contributions is available. Part-time employees may have access to benefits on a pro-rated basis. See _ for more information. Need assistance throughout the application or hiring process? Email _. Get to Know Us We’ve always been driven to unleash the full potential of our differentiated brands and our passionate people. Our iconic, world-class brands at Kellanova include Pringles, Cheez-It, Pop-Tarts, MorningStar Farms, Special K, Krave, Zucaritas, Tresor, Crunchy Nut, among others. Mars, Incorporated has acquired Kellanova in a transaction that brings together iconic brands, storied legacies and outstanding capabilities with a view to shape the future of snacking. You can learn more _, and our hiring teams will be happy to discuss further questions if your application advances in the hiring process. Let’s shape the future of snacking. Kellanova is an Equal Opportunity Employer that strives to provide an inclusive work environment, a seat for everyone at the table, and embraces the diverse talent of its people. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law. For more information regarding our efforts to advance Equity, Diversity & Inclusion, please visit our website _.

Job Description Position Overview The Business Development Representative will focus on identifying and pursuing new business opportunities while fostering and maintaining strong relationships with potential clients. This role is responsible for meeting and exceeding sales targets, closing deals, and contributing to the long-term success of our organization by building lasting client partnerships and providing exceptional customer service. This is a challenging and rewarding position for a motivated, persistent, strategic thinker who thrives in a fast-paced environment and is driven to achieve success, Responsibilities • Identify and pursue new business opportunities through market research, networking, cold-calling and proactive outreach, • Build and nurture strong relationships with prospective clients, ultimately driving new business and closing deals, • Consistently meet and exceed monthly and quarterly sales targets, • Deliver exceptional customer service and support throughout the sales process, • Collaborate with other teams to ensure smooth onboarding and successful implementation for new clients, • Other duties as required. Qualifications • High school diploma or equivalent, • Minimum of 2 years of experience in sales or business development., • Proven success in consistently meeting or exceeding sales targets, • Exceptional communication and interpersonal skills., • Strong organizational and time-management abilities essential for meeting sales targets., • Experience thriving in a fast-paced, high-growth environment., • Capable of working independently as well as collaborating effectively within a team., • Leverage strategic thinking, strong analytical, and problem-solving skills to identify new business opportunities and develop impactful sales strategies., • Previous experience in the restoration or service industry is preferred., • Proficiency in with CRM software and sales automation tools is a plus and highly beneficial, and experience in the software or technology industry will be an advantage., • Must possess a valid driver’s license, reliable transportation, and a clean driving record. The ability to maintain a satisfactory driving history throughout employment is required, unless reasonable accommodations are needed in accordance with applicable law., • Ability to travel locally, with occasional out-of-area and overnight travel as needed., • Must be able to successfully pass a background check, motor vehicle record review, and drug screening. Servpro is an equal opportunity employer. We provide equal employment opportunities to all individuals regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, disability, or veteran status.

Job Description:\n\nWho are we? \nDataOne designs, develops, and operates sustainable AI Factories, combining energy, infrastructure, and artificial intelligence at industrial scale. \nWe operate large-scale digital and energy infrastructures internationally, delivering concrete projects measured in hundreds of megawatts and designed for long-term operational performance. \nAt DataOne, we are builders and operators. We prioritize real-world execution, operational excellence, and measurable impact.\nJob Purpose :\nThe Human Resources Director - US leads the Human Resources function for DataOne's US operations, with primary responsibility for New Jersey and support for employees and operations across other US states. The role serves as a strategic HR partner to senior leadership and is responsible for developing and executing the US HR strategy, building scalable people practices, and ensuring alignment with DataOne's global People strategy and business objectives. \nThis is a senior HR leadership role combining strategic direction with hands-on execution across organizational design, workforce planning, talent strategy, employee relations, performance management, compensation and benefits, HR operations, culture, and the continued development of the US HR function. The role operates in a workforce environment that includes exempt and non-exempt employees, hourly workers, construction and site-based personnel, and mission-critical data center operations. \nThe HR Director works closely with management and the Legal Department on sensitive or complex employment matters. Matters requiring legal interpretation, legal risk assessment, formal legal review, or external legal support are coordinated through the Legal Department, with the HR Director providing the relevant HR context, documentation, and operational support. \n\nKey Responsibilities \nA. HR Strategy & Leadership \n\n Define and execute the HR strategy for DataOne's US operations in alignment with the Company's global business and People priorities. \n\n Act as a strategic HR advisor to senior leadership on workforce, organizational, talent, and people-management matters. \n\n Translate business objectives into practical HR and workforce initiatives. \n\n Develop scalable HR processes, procedures, governance, and operating models to support DataOne's US growth. \n\n Identify workforce and organizational challenges and provide HR recommendations to management. \n\n Establish priorities, service standards, and KPIs for the US HR function. \n\n Ensure significant HR initiatives remain aligned with Company governance, management direction, and applicable internal approval processes. \n\nB. Organizational Design & Workforce Planning \n\n Partner with management to develop organizational structures supporting current operations and future growth. \n\n Lead workforce planning, headcount planning, manpower planning, and HR budgeting for the US organization. \n\n Support management in defining roles, reporting structures, and workforce capability requirements. \n\n Identify critical positions, succession needs, and capability gaps. \n\n Develop appropriate recruitment, retention, development, and succession initiatives. \n\n Support business expansion, restructuring, and organizational transformation from an HR perspective. \n\n Coordinate with management and the Legal Department on restructurings, reductions in force, significant organizational changes, or other matters requiring legal review before implementation. \n\nC. Management & Leadership Support \n\n Serve as a senior HR partner to executives, managers, and functional leaders. \n\n Support managers in employee management, performance management, engagement, organizational effectiveness, and leadership matters. \n\n Provide practical HR guidance regarding employee development, feedback, objectives, and team effectiveness. \n\n Support implementation of organizational and workforce decisions approved by management. \n\n Maintain effective working relationships across US and international management teams. \n\n Work with management and the Legal Department on sensitive employee matters where legal review or broader risk assessment is appropriate. \n\nD. Talent Acquisition & Recruitment \n\n Partner with Talent Acquisition and management to establish US hiring priorities and workforce plans. \n\n Oversee recruitment strategy for key positions and participate in senior-level recruitment as appropriate. \n\n Ensure recruitment processes are structured, timely, measurable, and aligned with DataOne's requirements. \n\n Ensure offers, compensation proposals, and employment documentation follow applicable Company approval processes. \n\n Develop effective onboarding and integration programs. \n\n Monitor recruitment performance and recommend improvements. \n\nE. Performance, Talent & Succession Management \n\n Lead the US performance-management process. \n\n Support management in identifying high-performing and high-potential employees. \n\n Develop talent-review and succession-planning processes for key positions. \n\n Support managers in addressing performance deficiencies and developing appropriate performance-improvement measures. \n\n Coordinate performance-management actions with the Legal Department where the circumstances require legal review or broader risk assessment. \n\n Identify leadership-development and employee-development needs. \n\n Promote consistent documentation and application of performance-management processes. \n\nF. Employee Relations & HR Governance \n\n Ensure employee relations matters are handled consistently, professionally, confidentially, and with appropriate documentation. \n\n Support fact-finding and internal HR reviews and ensure that matters requiring additional review are escalated through the appropriate internal channels. \n\n Work closely with management and the Legal Department on complex or sensitive employee matters, investigations, disciplinary actions, and terminations where legal review or additional risk assessment is appropriate. \n\n Implement agreed HR actions and recommendations following the applicable management and Legal review process. \n\n Maintain clear escalation and decision-making processes within the HR function. \n\n Lead and support employee relations matters, including grievances, performance concerns, disciplinary processes, workplace complaints, and employee-management issues. \n\nG. HR Compliance & Governance \n\n Ensure HR practices, processes, and employee documentation are administered consistently with Company policies and applicable requirements. \n\n Oversee the development and implementation of US HR policies and procedures in coordination with the relevant internal functions. \n\n Maintain appropriate HR governance, documentation, controls, and audit readiness. \n\n Stay informed of developments affecting HR practices and coordinate with the Legal Department where legal interpretation or formal legal review is required. \n\n Work collaboratively with Legal Counsel on employment-related matters requiring legal input or review. \n\n Support the implementation of legal guidance and agreed actions within the HR function. \n\n Any engagement or communication with external legal counsel on employment-related matters will be coordinated through the Legal Department. \n\nH. Compensation, Benefits & Reward \n\n Partner with management to develop competitive and sustainable US compensation and benefits practices. \n\n Provide market and internal compensation information to support recruitment, retention, and workforce planning. \n\n Coordinate annual compensation and salary-review processes. \n\n Administer US benefits programs and manage day-to-day relationships with benefits providers, brokers, PEOs, and HR service providers. \n\n Support development and administration of incentive and reward programs. \n\n Ensure compensation changes and offers follow the applicable Company approval process. \n\n Coordinate with Finance, Payroll, and Legal where appropriate. \n\nI. HR Operations & HRIS Governance \n\n Lead US HR operations. \n\n Ensure effective administration of the employee lifecycle, including recruitment coordination, onboarding, employee changes, leave administration, payroll inputs, benefits administration, employment documentation, and offboarding. \n\n Establish clear HR workflows, responsibilities, service standards, and approval processes. \n\n Ensure accurate and timely HR information within Odoo, TriNet, and other applicable HR systems. \n\n Drive process improvements and appropriate automation. \n\n Maintain complete and accurate personnel files and HR records. \n\n Ensure HR actions requiring management, Finance, or Legal approval are not implemented before such approval is obtained. \n\nJ. People Analytics & HR KPIs \n\n Establish and monitor HR metrics and dashboards for the US organization. \n\n Report on headcount, recruitment, turnover, retention, absenteeism, workforce costs, and other relevant HR metrics. \n\n Analyze workforce trends and make recommendations to management. \n\n Support budgeting, forecasting, and workforce planning with accurate people data. \n\n Ensure HR reporting is accurate, timely, and appropriately confidential. \n\nK. Culture & Employee Engagement \n\n Support development of a strong, professional, and accountable DataOne culture. \n\n Develop initiatives supporting engagement, communication, collaboration, and retention. \n\n Promote Company values and expected behaviors throughout the employee lifecycle. \n\n Partner with management and Communications on internal employee communications and organizational-change initiatives. \n\n Maintain a visible and accessible HR presence. \n\n Develop employee-wellbeing and engagement initiatives in coordination with management. \n\nL. HR Team Leadership \n\n Lead and develop the US HR team. \n\n Establish clear responsibilities and reporting lines within HR. \n\n Set objectives and performance expectations for HR team members. \n\n Promote accountability, responsiveness, discretion, confidentiality, and operational excellence. \n\n Establish effective working relationships between HR, Talent Acquisition, Finance, Operations, Legal, and other functions. \n\n Ensure members of the HR team understand and follow applicable escalation and internal approval processes. \n\nDecision-Making & Escalation \n\n Manage day-to-day HR operations and make recommendations within the scope of the HR function and applicable Company policies. \n\n Coordinate matters requiring broader business, legal, financial, or executive review through the appropriate internal function and management process. \n\n Escalate complex or sensitive employee relations matters, significant disciplinary matters, terminations presenting heightened risk, threatened claims, regulatory inquiries, whistleblower matters, significant investigations, and other matters requiring legal review to the Legal Department and appropriate management. \n\n Provide timely HR documentation, factual background, and operational support to management and Legal Counsel as required. \n\n External legal counsel on employment-related matters is engaged and coordinated through the Legal Department. \n\nM. US / New Jersey Workforce, Safety & Site HR \n\n Serve as the senior HR lead for US operations, with particular familiarity with New Jersey employment practices while maintaining sufficient knowledge of employment requirements applicable in other states where DataOne operates or employs personnel. \n\n Support HR matters involving exempt and non-exempt employees, including hourly workforces, timekeeping, attendance, overtime, shift structures, wage-and-hour practices, and related HR administration. \n\n Understand the HR requirements of construction, industrial, engineering, and site-based workforces, including onboarding, site access, workforce documentation, training coordination, and employee relations in operational environments. \n\n Maintain practical familiarity with workers' compensation administration, workplace injury reporting, return-to-work coordination, leave interaction, and coordination with insurers, brokers, managers, and relevant internal functions. \n\n Work closely with Operations, Health & Safety, site leadership, and Legal on employee matters arising from workplace safety incidents, injuries, investigations, or other site-related concerns. \n\n Maintain practical familiarity with OSHA requirements relevant to HR administration and workforce practices, while coordinating technical safety compliance matters with the Company's Health & Safety function and legal matters with the Legal Department. \n\n Understand the operational demands of mission-critical data center environments, including 24/7 operations, shift-based staffing, technical and construction personnel, access-control requirements, emergency-response coordination, and the need for workforce continuity. \n\n Support workforce planning and HR processes for rapid-growth data center and construction environments, including high-volume hiring, contractor interfaces, shift coverage, retention, and site mobilization. \n\n Ensure HR processes are adapted appropriately to the different workforce populations within DataOne's US operations while maintaining consistent Company standards and governance. \n\nRequirements\nRequirements \nEducation & Experience \n\n Bachelor's degree in Human Resources, Business Administration, Organizational Development, or a related discipline; Master's degree is advantageous. \n\n Typically 10+ years of progressive HR experience, including significant HR leadership responsibility. \n\n Demonstrated experience operating as an HR Director, Head of HR, Senior HR Business Partner, or equivalent senior HR leader. \n\n Strong experience supporting US-based organizations and senior leadership teams. \n\n Demonstrated experience building, scaling, or transforming HR functions in growing organizations. \n\n Strong experience across employee relations, organizational design, workforce planning, performance management, compensation, benefits, HR operations, and talent management. \n\n Experience in data centers, infrastructure, energy, technology, engineering, construction, manufacturing, industrial operations, or another mission-critical environment is highly valuable. \n\n Experience operating within an international or multinational organization is strongly preferred. \n\n Strong experience supporting New Jersey-based workforces and practical familiarity with employment requirements in other US states. \n\n Experience supporting hourly and non-exempt employee populations, preferably in construction, industrial, engineering, facilities, or other operational environments. \n\n Practical experience with workers' compensation processes, workplace injury administration, and return-to-work coordination. \n\n Experience in data centers, critical infrastructure, construction, energy, engineering, manufacturing, or another 24/7 mission-critical operating environment is strongly preferred. \n\nSkills & Competencies \n\n Strong knowledge of US HR practices and practical familiarity with federa

Job Description Location: Swedesboro, NJ 08085 Pay: $45–$46/hr, plus a $1.50/hr shift differential for 2nd shift. Shifts: 1st shift (6:00 AM – 2:30 PM) and 2nd shift (2:00 PM – 10:30 PM) available. Weekend availability is required as production needs dictate. We're hiring Controls Technicians for a large commercial bakery in Swedesboro, NJ. You'll maintain, troubleshoot and optimize plant-wide electrical, automation and process control systems on high-speed food production lines, and you'll provide technical leadership and training to Electro-Mechanics across all shifts. What You'll Do • Maintain and optimize plant electrical, automation, and process control systems to maximize equipment reliability and uptime., • Lead troubleshooting and root cause analysis for electrical and controls-related equipment failures., • Train and coordinate Electro-Mechanics across all shifts., • Oversee preventive, predictive, and corrective maintenance for PLCs, drives, networks, and production equipment., • Maintain electrical schematics, control programs, system configurations, and equipment documentation., • Support plant utility systems including steam, refrigeration, HVAC, compressed air, water, and power distribution., • Follow GMP, safety, quality, and regulatory standards and drive continuous improvement. What You Bring • High school diploma or equivalent with extensive industrial controls, automation, or electrical maintenance experience., • Working knowledge of machine layouts, control drawings, P&IDs, system interconnection drawings, and distributed control systems., • Proficiency with Rockwell (Allen-Bradley), Siemens, and Mitsubishi programming, configuration, and troubleshooting software., • Ability to read electrical schematics, work orders, operating manuals, and maintenance instructions., • Strong analytical and problem-solving skills., • Ability to lift up to 50 lbs with assistance., • Valid driver's license. Nice to Have • Associate's degree in Electrical Engineering, Electronic Engineering Technology, or a related field., • Machine design, control system installation, commissioning, and startup experience., • Food, bakery, CPG, or continuous process manufacturing experience., • CMMS experience., • Knowledge of industrial networking, AC/DC drives, servo systems, hydraulics, and pneumatics. Benefits: medical, dental, vision, company-paid life insurance, paid time off and holidays, paid parental leave, retirement plan, short- and long-term disability, HSA/FSA.

Job Description Proconex is the exclusive Emerson Impact Partner for Emerson Automation Solutions in the Mid-Atlantic region. We provide a full portfolio of Process Automation Control Systems, Valves and Control Devices, and related technologies and services to a range of customers—in the Life Sciences, Chemical, Power, Refining, Oil & Gas, Food & Beverage, Paper, Metals, and other industries, as well as commercial enterprises and campus facilities. With three strategically located offices, Proconex maintains a deep dedication to its 200+ employees, a sharp focus on safety and quality, and the drive to deliver. MACHINIST II Atlantic Valve Services (AVS) | Swedesboro, NJ | Full-Time Precision Machining • Valve Repair • Industrial Equipment RestorationBuild a Career in Specialized Industrial Machining Are you an experienced machinist who takes pride in precision workmanship and solving mechanical challenges? Atlantic Valve Services (AVS) is seeking a skilled Machinist II to support the repair, restoration, and machining of critical valve components used across the power generation, pharmaceutical, chemical, refining, manufacturing, and industrial markets. This is not a high-volume production machining environment. Our machinists perform specialized repair and restoration work on valve bodies, trim, actuators, and related components, helping customers return critical equipment to service safely and efficiently. If you enjoy working on unique projects, solving complex repair challenges, and producing precision work that directly impacts industrial operations, we'd like to hear from you. Note: Significant overtime opportunities are available during spring and fall outage seasons. About Atlantic Valve Services Atlantic Valve Services (AVS) is a full-service safety relief and control valve repair center supporting customers throughout the Northeast and Mid-Atlantic region. We are a premier service provider for Emerson/Fisher control valves and an authorized assembler of Anderson Greenwood, Crosby, and Kunkle pressure relief valves. In addition to safety relief valves, our experienced technicians repair all types of control valves, including sliding stem and rotary valves, as well as isolation valves such as gate, globe, ball, butterfly, and check valves. AVS also provides valve cleaning, diagnostics, upgrades, modifications, testing, calibration, and field services for critical industrial facilities. Our work helps keep manufacturing plants, energy facilities, pharmaceutical companies, refineries, food production facilities, and industrial operations running safely and efficiently. Why Join AVS? • Competitive pay with seasonal overtime opportunities, • Stable, long-term career in a specialized industrial trade, • Premium medical, dental, and vision benefits, • 401(k) with company match, • Clean, professional shop environment, • Opportunity to work on a wide variety of machining and repair projects, • Exposure to critical industrial equipment and processes, • Learn from experienced machinists, technicians, and industry experts, • Opportunity to support field service and outage work based on experience and business needs, • Work that directly supports customer safety and operational reliabilityWhat You'll Do As a Machinist II, you will perform precision machining and repair operations on valve components, tooling, fixtures, and related equipment. Responsibilities include: • Operate manual machine shop equipment including engine lathes, milling machines, grinders, drill presses, and other machining equipment, • Machine new parts from bar stock and raw castings, • Restore damaged valve bodies, trim components, and related equipment to required tolerances, • Interpret blueprints, drawings, specifications, and work instructions, • Perform precision measurements using micrometers, calipers, indicators, and other measuring instruments, • Maintain critical dimensions and tolerances throughout machining and repair operations, • Rework, modify, and repair existing components to support customer requirements, • Assist in developing tooling, fixtures, and production aids to improve efficiency and quality, • Verify completed work meets quality standards and job specifications, • Complete required job documentation and inspection records, • Maintain a clean, organized, and safe work environment, • Comply with all AVS safety policies and procedures, • Support additional shop and field service activities as assignedQualificationsRequired, • High school diploma or equivalent, • Minimum of 3 years of machining experience, • Strong understanding of manual machining practices and techniques, • Ability to read and interpret mechanical drawings and blueprints, • Experience using precision measuring equipment, • Strong attention to detail and commitment to quality workmanship, • Ability to work independently and as part of a team, • Commitment to workplace safetyPreferred, • Machinist trade school certificate or apprenticeship training, • Military machining or mechanical maintenance experience, • Experience repairing industrial equipment or valve components, • Experience with horizontal lathes, vertical turret lathes (VTLs), milling machines, boring mills, and drill presses, • Welding, fabrication, or mechanical repair experience, • Experience in power generation, manufacturing, refinery, pharmaceutical, or industrial environmentsIdeal Backgrounds We encourage applications from individuals with experience in: • Manual machining and toolmaking, • Industrial equipment repair, • Valve repair and maintenance, • Power generation facilities, • Manufacturing operations, • Refineries and chemical plants, • Military mechanical and machining occupations, • Shipyards and heavy industrial environments, • Precision machine shops, • Maintenance and reliability organizationsPhysical Requirements & Work Environment, • Ability to work in an industrial machine shop environment, • Ability to stand for extended periods, • Ability to regularly lift and move materials weighing 25-50 pounds, • Ability to safely operate machine tools and lifting equipment, • Ability to wear required personal protective equipment (PPE), • Occasional travel and field work may be required depending on business needs and experience level, • Ability to work overtime during peak outage and maintenance seasonsReady to Put Your Machining Skills to Work? Join a team that values craftsmanship, safety, and technical expertise while supporting some of the most critical industrial operations in the Northeast and Mid-Atlantic region. Apply Today and build a long-term career with Atlantic Valve Services. We are proud to be an employee-owned organization. Through our ESOP, every team member shares in the growth and success of the company, fostering a culture of collaboration, accountability, and long-term rewards. Proconex offers a standout culture, fantastic work environment, and has very competitive benefits to include premium medical, 401K match, tuition reimbursement, and other unique incentives. When receiving e-mails from a Proconex or Valspec recruiter, you will only receive e-mails from addresses ending in @proconexdirect.com, @proconex.net or @valspec.net. Any other domains are impersonations and should be ignored. Candidates must be legally eligible to work in the United States without company sponsorship. Also, we are not interested in working on a corp-to-corp basis with other companies at this time. Any third-party unsolicited resume submission(s) will immediately become the property of Proconex. Proconex will not pay any fee to a submitting employment agency, person, or entity unless a signed agreement is established. Proconex is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, sexual orientation, gender identity, disability, protected veteran status or any other protected class. We are committed to providing a professional environment free of any discrimination or harassment, and we are proud to be a Drug-Free Workplace.

Job Description Junior Building Automation Controls Engineer Position Summary We are seeking a motivated and technically capable Junior Building Automation Controls Engineer to provide on-site support for a large commercial building environment. This role is ideal for candidates with 1 to 5 years of experience in Building Automation Systems (BAS), HVAC controls, or facility controls engineering who are looking to expand their technical expertise while contributing to critical building operations and special projects. The Junior Building Automation Controls Engineer will serve as an on-site technical resource, supporting daily building operations, assisting with troubleshooting and maintenance of automation systems, and participating in capital improvement and special project initiatives. This position is critical to ensuring reliable building performance and providing local support for a remotely managed engineering team. The successful candidate will possess a strong understanding of basic control systems, be comfortable working independently, and preferably have experience or familiarity with mechanical, electrical, HVAC, or construction trades. Key Responsibilities Building Automation System Support • Monitor, maintain, and troubleshoot Building Automation Systems (BAS) and related controls infrastructure., • Respond to system alarms, operational issues, and occupant comfort concerns., • Assist with diagnosing HVAC equipment, sensors, actuators, controllers, networked devices, and control sequences., • Perform routine inspections of automation systems and document findings., • Verify proper operation of equipment through trend analysis and system monitoring., • Coordinate with vendors and service providers performing maintenance and controls work. On-Site Operations Support • Serve as the primary on-site controls resource during assigned shifts., • Conduct field investigations and provide real-time support for operational issues., • Perform basic control point verification, calibration checks, and functional testing., • Support preventive maintenance activities involving HVAC and controls systems., • Communicate site conditions, operational concerns, and project updates to remote management. Project Support • Support special projects, equipment upgrades, commissioning activities, and system integrations., • Assist with BAS graphics updates, point databases, and documentation efforts., • Participate in testing and verification of newly installed controls systems., • Review field installations to verify compliance with project requirements., • Coordinate with engineering, facilities, IT, contractors, and commissioning teams. Documentation & Reporting • Maintain accurate service records, troubleshooting logs, and project documentation., • Create and update system documentation, network diagrams, and control narratives as required., • Provide regular status updates and written reports to management., • Assist in developing operational procedures and best practices. Requirements Required Qualifications • Associate's degree, technical certification, or equivalent experience in:, • Building Automation Systems, • HVAC Controls, • Mechanical Engineering Technology, • Electrical Engineering Technology, • Industrial Controls, • Related technical field, • 1 to 5 years of experience in one or more of the following:, • Building Automation Systems (BAS), • HVAC controls, • Facility operations, • Controls engineering, • Mechanical or electrical systems, • Basic understanding of:, • HVAC equipment and operations, • Direct Digital Controls (DDC), • Control devices, sensors, actuators, and relays, • Building automation software platforms, • Electrical and mechanical troubleshooting practices, • Ability to read and interpret:, • Control drawings, • Wiring diagrams, • Sequences of operation, • Mechanical and electrical plans, • Strong organizational and communication skills., • Ability to work independently with limited on-site supervision. Preferred Qualifications • Experience with common BAS platforms such as:, • Siemens, • Johnson Controls, • Trane, • Honeywell, • Schneider Electric, • Automated Logic, • Distech, • Niagara Framework, • Knowledge of HVAC mechanical systems including:, • Air handling units, • Chillers, • Boilers, • VAV systems, • CRAC/Computer room cooling systems, • Experience in one or more skilled trades:, • HVAC, • Electrical, • Controls installation, • Mechanical maintenance, • Construction, • Familiarity with:, • BACnet, • Modbus, • LonWorks, • IP networking fundamentals, • Exposure to commissioning or retro-commissioning activities. Key Competencies • Technical troubleshooting, • Independent decision-making, • Attention to detail, • Customer service orientation, • Strong communication skills, • Time management and prioritization, • Ability to coordinate across multiple teams, • Adaptability in a fast-paced operational environment Work Environment • Full-time, on-site position., • Shift coverage required; one controls engineer will be assigned per shift., • Position requires regular travel throughout the facility, including mechanical rooms, rooftops, and equipment spaces., • May require occasional after-hours support for emergencies, maintenance windows, or project activities.

Job Summary This position communicates with the field teams regarding new field sales tools and operational processes related to selling activities and supports specific sales enablement tools daily to drive successful usability in the field. Acts as a conduit between the field teams and all other internal departments for operational initiatives. Assists the field sales team, inside sales team, and the corporate accounts team, in reaching their respective territory, regional, area and national sales goals determined annually by the commercial executive leadership team. Manage and maintain all commercial operations processes existing under the Commercial Excellence organization, collaborating with the different functional teams to document, evaluate, and drive continuous improvement. Leads and assists with projects and initiatives focused on driving revenue. Job Details/Responsibilities • Designs, develops, coordinates, and facilitates the execution of specified initiatives or small projects focused on business revenue goals. Establishes project priorities and schedules, in line with strategic plans and operating objectives, aimed to enhance and fulfill ongoing and new needs for the commercial business. This will require collaboration throughout the organization and across departments., • Provides ongoing usability support to field associates for identified technical systems, including existing and new sales enablement technologies such as the MoveMedical Software or SalesForce., • Manages and executes all specific commercial activities driven by standard SAP functionality, such as Backorder Processing, Allocations, Limited Market Release set up, Product Determination Strategies, etc., • Assists with ERP management for the commercial business in conjunction with technical resources to enact changes or identify enhancement opportunities to drive successful commercial process improvements., • Proactively generates improvement strategies of current processes to ensure opportunities for commercial excellence are captured, evaluated, and implemented. Creates documentation of such processes to ensure repeatable process execution and for training material., • Support and maintain commercial data integrity with a focus on customer master data, collaborating cross functionally to ensure all stakeholder needs are met with master data elements., • Collaborate with all other key commercial operations personnel to complete and achieve successful results for operational projects., • Provides sales and operational support for the Corporate Accounts Team when needed., • Proactively identifies new automation opportunities and recommends new process innovations to drive better business outcomes for both internal stakeholders and external customers., • Helps develop and document metrics, KPIs, analytics and dashboards to provide performance measurement and drive business performance for various sales and marketing programs., • Assists with execution of commercial operations initiatives in collaboration with the Manager, Business Applications and Process Management., • Supports day-to-day operational needs/requests of the sales and marketing teams., • Help train and mentor new Business Applications Specialists or other operational personnel hired., • Handles all requests from Customer Care or Accounts Receivable forwarded to the Business Applications Specialist, assuring a timely resolution., • Participates in Regional, Territory and National sales meetings to assure strong alignment and collaboration with Sales and Marketing. Completes all administrative duties required for the position., • Demonstrates a commitment to patient safety and product quality by maintaining compliance with Quality System requirements and all other documented policies and procedures including prompt reporting of adverse events and product performance reports. Fully adheres to all aspects of Terumo’s Interaction with Healthcare Providers policy and AdvaMed guidelines., • Perform other job-related duties as assigned. Knowledge, Skills and Abilities (KSA) • A combination of strong business acumen coupled with a high technical aptitude for sales enablement and ERP system support., • Strong project management and analytical skills and the ability to effectively communicate with people at all levels of the organization., • Ability to manage multiple projects under time constraints., • Excellent communication skills., • Ability to build strong relationships with all internal and field associates., • A sense of urgency, ability to meet deadlines and function independently with minimal supervision., • Proficient in Microsoft Office software especially Word, Excel and Outlook and ability to learn new software., • Ability to deliver results accurately and with a high sense of urgency. Qualifications/ Background Experiences • Bachelor’s Degree required and minimum 2 years of sales, telesales, telemarketing or order management preferred, or equivalent combination of education, experience & training., • Experience with sales tactics or process preferred., • Experience in a customer facing environment preferred., • Experience with cross functional project management preferred., • Experience with SAP is preferred., • Experience with other sales enablement tools such as SalesForce is preferred

Position Overview: We are seeking a hands-on and detail-oriented Process Engineer to join our dynamic manufacturing operations team. This role is critical in supporting yield improvement, day-to-day production troubleshooting, and new product introduction (NPI) within a fast-paced 24/7 high-volume production environment. You will work directly on 1st shift (8:30AM – 5PM) to ensure optimal performance of processes, effective support to production teams, and smooth onboarding of new products. This position is an excellent opportunity for engineers looking to make a significant impact in advanced manufacturing operations, supporting blue-chip customers with world-class standards for quality and delivery. The Process Engineer will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: • Provide real-time process support for production teams on the afternoon shift, ensuring minimal downtime and swift issue resolution., • Analyze and improve manufacturing yields, identifying root causes of scrap, rework, and process variation through data-driven methods (e.g., SPC, FMEA, 5 Whys, Fishbone)., • Lead or support new product introduction (NPI) activities, including process validation, work instruction development, and ramp-up readiness., • Collaborate with cross-functional teams (Quality, Maintenance, Operations) to drive continuous improvement initiatives focused on cost, efficiency, and throughput., • Develop and maintain standard operating procedures, process documentation, and training materials for manufacturing staff., • Support implementation of Lean manufacturing and Six Sigma techniques to reduce waste and improve process control., • Monitor key performance indicators (KPIs) for yield, cycle time, downtime, and quality, with regular reporting and action planning., • Participate in audits, customer visits, and internal reviews as a technical subject matter expert for assigned process areas., • Ensure compliance with safety, quality, and regulatory standards applicable to manufacturing operations Other Important Responsibilities: • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed., • Thorough documentation of existing processes and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate., • Other miscellaneous duties as assigned. Qualifications: • Bachelor's degree in Manufacturing, Mechanical, Industrial, or Chemical Engineering (or equivalent field)., • A minimum of 5 years (or more) of experience in a high-volume manufacturing environment (preferably supporting 24/7 operations)., • Proven experience in yield improvement, root cause analysis, and process troubleshooting., • Familiarity with NPI processes, including process validation and production readiness., • Strong working knowledge of Lean, Six Sigma, SPC, and other process control methodologies., • Proficiency with data analysis tools (Excel, Minitab, JMP, etc.) and manufacturing systems (MES, ERP)., • Excellent communication and collaboration skills across shifts and cross-functional teams., • Willingness to work on the weekends or afternoon shift (3 PM – 11 PM) and occasionally support coverage across other shifts as needed., • Experience in regulated manufacturing (e.g., automotive, aerospace, electronics, or medical device)., • Six Sigma Green Belt or Lean certification., • Hands-on experience with automation systems, sensors, or high-throughput equipment. Physical requirements and work environment: • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended.

Location: Somerset, NJ Type: Full-time Shift: Monday - Friday 1:30 pm start Pay: Starting at $20-21/hour This is a Union Position As a union Warehouse Associate, you'll benefit from a comprehensive, employee-first benefits package designed to support your health, financial security, and long-term growth. Our union-backed benefits go beyond the basics - providing stability, strong protections, and meaningful perks that reward your hard work and commitment. • Union-provided medical, dental, and vision insurance with no employee deductions (only standard copayments), • Weekly pay, • 10 paid holidays plus 4 floating holidays, • Vacation and sick time, • Union annual wage increases, • Annuity (retirement savings plan), • FICA reimbursement after 2 years of employment, • Shift differential, • Health Reimbursement Account (HRA), • Company-issued boot allowance, • Company-provided PPE and apparel, • Continual education opportunities, • Longevity awards with pay increases, • Maternity and bereavement At Turtle, we're redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we've built a reputation for innovation, excellence, and exceptional customer serviceand we're just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what's possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that's making waves and empowering its people to do extraordinary things every single day! The Warehouse Associate is responsible for accurately selecting, packing, and preparing products for shipment while maintaining high standards for efficiency, safety, and cleanliness in daily warehouse operations. • Accurately pick products based on order requirements within the Warehouse Management System (WMS)., • Verify correct item numbers, quantities, labels, and expiration dates., • Pack, bag, tag, or label orders as required to prepare them for shipment., • Ensure outgoing shipments are complete, correct, and properly documented in WMS., • Assist with receiving tasks, including counting products, checking packing slips, and inspecting for damage or shortages., • Rotate stock properly and place items in appropriate storage locations., • Move products using pallet jacks or other non-forklift equipment., • Maintain a clean and orderly work area, including aisles, equipment, and storage areas., • Perform repack or re-box tasks according to training and instructions., • Repair or recoup damaged goods as needed., • Assist with inventory accuracy, including cycle counts and aisle assessments., • Operate warehouse equipment safely and follow all OSHA and company safety procedures., • Charge equipment batteries and perform basic equipment upkeep., • Cut wire to specified lengths according to customer and production requirements., • Pull and stage pipe in specified quantities., • Identify different wire types to fulfill customer orders correctly., • Spool various wire sizes onto reels using wire-cutting machinery., • Correctly select, measure, and cut wire to customer specifications., • Support general warehouse tasks such as trash removal, replenishing supplies, snow removal, and other duties as assigned., • High School Diploma or equivalent., • Forklift experience preferred., • Warehouse experience preferred., • Ability to read, count accurately, write legibly, and perform basic math., • Strong attention to detail and ability to follow safety-focused instructions., • Ability to multitask and work efficiently in a fast-paced environment with tight deadlines., • Flexibility to perform a variety of warehouse tasks as needed., • Ability to lift up to 100 lbs with or without reasonable accommodation., • Ability to stand, walk, bend, and reach for extended periods. Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation's largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. You can begin by filling out our application online. Turtle is proud to be an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Provide timely and efficient completion of client transactions while maintaining accurate records and thorough proper handling of all monies assigned. Deliver superior quality service, identifying and understanding the client's financial needs. Cross-trained to support sales and service activities, with a particular focus on assisting with outbound calling and supporting Integrated Relationship Management (IRM) activities. Essential Duties and Responsibilities Following is a summary of the essential functions for this job. Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time. • Provide a distinctive client experience to ensure a consistent service level by engaging clients with smiling, facilitating courteous conversation, conducting both complex and standardized transactions while uncovering needs. Performs more complex transactions with assistance as necessary., • Educate clients on digital, self-service solutions including ATMs, Online and Mobile banking to make banking easier and enhance their service experience., • Support team sales process by participating in client outreach through outbound calls, checking for client offers, and identifying client needs or opportunities by fulfilling the need or referring the client to the appropriate branch team members or specialist., • Understand the importance of Integrated Relationship Management (IRM) to ensure we seamlessly deliver Truist expertise and solutions for our clients' unique needs., • Participate fully in all components of the established Truist Retail Community Bank Leadership Routines., • Commit to advancing individual and product knowledge to better serve consumer and business clients by attending sales, service and product knowledge meetings and all applicable training classes and web-based learning., • Adhere to internal controls, operational procedures and risk management policies. Stays informed of all changes in policies and procedures to ensure compliance with current guidelines., • Serve as secondary contact for new account openings and problem resolution, offering applicable products and services to clients and prospects. Handles proportionate volume of work based on branch demands. The annual base salary for this position is $45,760-$52,500. Additional incentive pay is available for this position. Required Qualifications: The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • High school diploma or equivalent education, • Two years of teller or cash handling or client service experience, • Six months of client relationship building or sales experience, • Excellent interpersonal and communication skills, including a desire to interact with clients and prospects, • Ability to master personal computer (PC) keyboard and software skills necessary for branch automation, • Ability to multi-task under time constraints, • Demonstrated proficiency in basic computer applications, such as Microsoft Office software products, • Ability to travel to accommodate temporary staffing needs as required to include temporary assignment or locale changes, • Ability to work weekends and/or extended hours with occasional travel and overnights may be included Preferred Qualifications: • One year of client relationship building or sales experience, • Knowledge of advanced or complex branch transactions, risk management and loss prevention, • Experience with sourcing and prospecting for new clients and client relationship building, • General understanding of bank operations, policies and procedures Truist is an Equal Opportunity Employer that does not discriminate on the basis of race, gender, color, religion, citizenship or national origin, age, sexual orientation, gender identity, disability, veteran status, or other classification protected by law. Truist is a Drug Free Workplace.

WSP is currently initiating a search for an Assistant Team Leader, Bridge Inspections! This role will be to join our exceptional Bridge & Infrastructure Inspection Team in New Jersey. Open to any WSP office location in New Jersey such as Lawrenceville-NJ, Newark-NJ, Morristown-NJ, etc. This opportunity is ideal for someone new to bridge inspection who wants to grow into a Bridge Inspection Team Leader role. At WSP, we inspire the right people to support our future-focused business goals, and our commitment to teamwork helps us strengthen communities and expand skylines. Join a collaborative team of experts working on projects that shape communities and support the future. Here at WSP, anything is within our reach and yours as a WSP employee. Come join us and help shape the future! • Contribute to a range of bridge and infrastructure inspection projects., • Serve as an Assistant Team Leader for bridge and sign structure inspections., • Perform structural engineering tasks and field inspections., • Support preparation of bridge load ratings., • Develop plans and sketches using Visio and MicroStation., • Collaborate independently and with cross-functional teams of engineers on multiple concurrent projects., • Support engineering assignments that build technical, interpersonal, and ethical skills., • Assist with project research, field work, preliminary repair calculations, and structural analysis., • Help prepare cost proposals and scope-of-work documents., • Collect, organize, and maintain project documentation., • Complete training for assignment-specific tasks., • Stay current on structural engineering techniques and practices., • Make responsible, ethical decisions regarding company funds, resources, and conduct while following WSP's Code of Conduct and related policies., • Perform other duties as business needs require. Required Qualifications • Bachelor's degree in Structural or Civil Engineering, or equivalent., • 0 to 1 years of experience with bridge and/or ancillary structure inspection projects., • Engineer-in-Training certification, or ability to obtain it within one year of hire., • Proficient understanding of structural engineering principles, practices, processes, and their application to project-related issues., • Demonstrated interest in structures, transportation, or a related field, with a strong desire to develop skills aligned with WSP's work and projects., • Physical ability to perform continuous field work, including working at heights and in confined spaces; climbing; carrying ladders and equipment; working in adverse weather, at night, and around moving vehicles., • Ability to work in and around water, including boat and wader work., • Ability to work in a role that may be approximately 50% field-based and 50% office-based., • Valid driver's license and successful completion of a Motor Vehicle Record check., • Strong interpersonal and communication skills, including the ability to present ideas clearly and professionally to engineering and non-engineering audiences., • Ability to work independently and provide guidance to project team members., • Advanced proficiency in technical writing, office automation, software, spreadsheets, technology, and related tools., • Working knowledge of Microsoft Office, including Word, Excel, and PowerPoint., • Proven commitment to workplace safety and ability to follow WSP's health, safety, drug/alcohol, and harassment policies., • Ability to work schedules based on project needs, which may include night work, workdays longer than 8 hours, and weekends., • Ability to travel occasionally, including potential overnight stays, depending on project requirements. Preferred Qualifications: • Engineer in Training Certification., • Prior work or internship related to the degree of study and the specific engineering discipline., • Interest in UAS Drone flying., • Interest in obtaining rope access (SPRAT) certification. WSP Benefits: WSP provides a comprehensive suite of benefits focused on providing health and financial stability throughout the employee's career. These benefits include coverage related to medical, dental, vision, disability, and life; retirement savings; paid sick leave; paid vacation (or other personal time); paid parental leave; and paid time off for purposes of bereavement, voting, and/or attendance at naturalization proceedings. Compensation: Expected Salary: $70,000 - $90,000 WSP USA is the U.S. operating company of WSP, one of the world's leading engineering and professional services firms. Dedicated to serving local communities, we are engineers, planners, technical experts, strategic advisors and construction management professionals. WSP USA designs lasting solutions in the buildings, transportation, energy, water and environment markets. With more than 15,000 employees in over 300 offices across the U.S., we partner with our clients to help communities prosper. WSP provides a flexible and agile workplace model while meeting client needs. Employees are also afforded a comprehensive suite of benefits including medical, dental, vision, disability, life, and retirement savings focused on providing health and financial stability throughout the employee's career. At WSP, we want to give our employees the challenges they seek to grow their careers and knowledge base. Your daily contributions to your team will be essential in meeting client objectives, goals and challenges. Are you ready to get started? WSP USA (and all of its U.S. companies) is an Equal Opportunity Employer Race/Age/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disability or Protected Veteran Status. The selected candidate must be authorized to work in the United States. NOTICE TO THIRD PARTY AGENCIES: WSP does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes include any resume or hiring document sent to WSP in the absence of a signed Service Agreement where WSP has expressly requested recruitment/staffing services specific to the position at hand. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.

Using Fricke inventory management/forecast system, and in partnership with Automation Operator, ensures staging of raw materials to ensure efficient operation of robot.

Duration: Contract Location: Somerset, NJ (Hybrid) Pay Rate Range: $55$60/hr on W2 The Data Center organization is responsible for the strategy, provisioning, operation, and lifecycle management of the firm's data center portfolio. The organization oversees the end-to-end delivery of data center services, from initial requirements and construction through day-to-day operations, technology placement, rack-and-stack execution, and physical asset lifecycle management. The organization supports the firm's business and technology objectives by delivering resilient, scalable, and efficient data center services through a global team. It manages a large portfolio of data center space and critical power infrastructure while maintaining strong operational and financial controls. Through a focus on operational excellence, engineering standards, risk management, capacity planning, application migration support, tooling and automation, and strategic execution, the organization is responsible for maintaining the stability, efficiency, and long-term resiliency of the firm's critical data center environments. The North American Hardware Break/Fix Operations Manager is responsible for leading the delivery of business-as-usual data center hardware operations across the Americas, including enterprise, colocation, exchange, WAN, and cloud environments. This senior leadership role requires a proven ability to drive operational performance, build and develop high-performing teams, foster a strong culture of accountability, and align service delivery with business priorities and technology objectives. The position is accountable for the overall operation, maintenance, governance, and service quality of critical Hardware Break/Fix, IMAC, and Smart Hands services supporting IT operations across the Americas data center footprint. Responsibilities include team and talent management, critical event response, incident and problem management, change management, risk mitigation, cost and contract oversight, and ownership of key stakeholder relationships with internal clients and Data Center Operations. The role requires the ability to provide or coordinate 24x7 escalation support, including participation in an on-call model and occasional scheduled weekend coverage as business needs require. Provide senior operational leadership and single-point accountability for the integrated, hands-on management of IT hardware services across the Client's Americas data center portfolio. Own and oversee hardware-related changes, significant events, incidents, and problems from initiation through closure, including post-incident reviews, root cause analysis, corrective actions, and management follow-up. Develop, maintain, and continuously improve standard operating procedures, emergency response procedures, preventive maintenance programs, and technical documentation. Maintain a deep understanding of data center design intent, operating models, contingency plans, and service dependencies to support effective resiliency planning and operational response. Provide disciplined oversight of financial management, cost control, regulatory and code compliance, personnel management, staff development, health and safety, statutory obligations, environmental controls, and energy management. Deliver regular management reporting that demonstrates operational performance, service quality, and adherence to internal OLAs, SLAs, KPIs, and governance expectations. Communicate operating principles, technical direction, objectives, and performance expectations clearly to stakeholders, vendor partners, and critical facilities management teams. Manage communications during incidents, ensuring timely, accurate, and authoritative updates to senior management; review incident reports, identify trends, document lessons learned, and recommend corrective actions. Oversee internal and external technical, statutory, and regulatory compliance audits, ensuring ownership, timely closure of follow-up items, and completion of corrective action plans. Coordinate with vendor partners and internal teams to resolve incidents during emergency situations, including on-site dispatch when required to investigate, assess, and support resolution of critical issues. Develop, obtain approval for, and execute environmental management and reporting plans that support carbon footprint management, sustainability, and responsible data center operations. Knowledge, skills, and abilities required to qualify for the position. Degree-level education with a relevant professional qualification preferred, or demonstrable equivalent experience in a comparable critical operations environment. Strong understanding of managed service contracts, service scope definition, vendor performance management, and technical RFP leadership for new services, rebids, and expanded scope. Experience managing a sizeable P&L and operating within disciplined operating and capital budget controls, with strong commercial awareness, business acumen, and financial accountability. Proven track record in the development and execution of strategic plans and initiatives. Strong understanding of critical support environments, such as data centers, hospitals, power plants, military facilities, financial services facilities, or other mission-critical operational settings. Excellent communication, negotiation, influencing, and analytical skills, with a demonstrated track record of leading, developing, and managing teams across regions, locations, and time zones. Strong networking skills, current industry knowledge, and the ability to build and maintain effective professional relationships. Ability to produce high-quality reports and presentations and deliver effective, persuasive communications to senior stakeholders. Demonstrated ability to solve complex problems, assess multiple resolution paths, and deliver effective outcomes in high-pressure, time-sensitive situations. Previous vendor negotiation and management experience for data center and/or construction contracts. Ability to write and review accurate and complete support procedures, system documentation, and issue tracking entries. Sound judgment and strong decision-making capability under pressure, with the ability to prioritize effectively and communicate clearly across a complex, fast-paced stakeholder environment. Customer-focused service delivery mindset, with a commitment to meeting the needs of internal stakeholders, business partners, and technology clients. The role requires close collaboration with representatives from Critical Infrastructure, Corporate Services, Security, Reengineering, Expense Management, Real Estate, IT Groups, and external vendors. The individual must be able to develop and maintain effective working relationships across regions and time zones. For workers in the United States, PrideGlobal and its affiliates offers eligible employee's comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, pet insurance and employee discounts with preferred vendors. Equal Employment Opportunity PrideGlobal and its affiliates are an equal opportunity employer. We do not discriminate on the basis of the race, religious creed, color, national origin, ancestry, physical disability, mental disability, reproductive health decision making, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, age, sexual orientation, veteran or military status, or any other characteristic protected by applicable federal, state, or local law. Fair Chance Employment PrideGlobal and its affiliates are a Fair Chance employer. We consider all qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local Fair Chance laws and ordinances, including, the California Fair Chance Act and all applicable local Fair Chance ordinances. Accommodations We are committed to providing reasonable accommodations to applicants and employees with disabilities. If you require a reasonable accommodation to participate in the application or interview process, or to perform the essential functions of this role, please contact us. Only applicable for San Francisco Candidates Lactation in the Workplace Under the San Francisco Lactation in the Workplace Ordinance, we will provide written notice of lactation accommodation rights, and this notice will automatically be given upon hiring, any inquiry of parental leave or lactation accommodation. Criminal Record Check Only applicable for Kentucky positions: For this type of employment, state law requires a criminal record check as a condition of employment. This applies to direct care staff (Examples: RN, LPN, Nurse Aides, Therapists) referred to Kentucky nursing facilities, assisted living communities, or long-term care facilities, in accordance with KRS 216.793.

At CompoSecure, we are redefining the future of payment card technology. As a global leader in premium metal payment cards and fintech solutions, we combine innovation with craftsmanship to deliver exceptional products for the world's leading financial institutions. We're looking for talented individuals who share our passion for excellence and innovation. The Technical Accounting And Sec Reporting Lead will serve as a key member of the GPGI Inc. ("GPGI") Corporate Finance organization, responsible for complex technical accounting matters, SEC reporting, consolidation, and financial statement disclosures. This is a dynamic exciting role that allows for working closely with Accounting, FP&A, Treasury, Legal, Tax, Human Resources, and Operations at GPGI's various operating and Holdco entities. As well as interact with external auditors to ensure compliance with U.S. GAAP, SEC reporting requirements, and internal control standards. This individual will be a valuable part of a larger team that is located either in Somerset, NJ or Toronto (suburb), Ontario, Canada. The successful candidate will possess strong technical accounting expertise, SEC reporting and global consolidations experience, and the ability to manage multiple priorities in a fast-paced global public company environment. Technical accounting experience specifically in the following areas are a benefit: debt accounting, revenue recognition, stock-based compensation, business combinations, and consolidations. SEC Reporting & Financial Reporting • Prepare and review Forms 10-Q, 10-K, 8-K, and other SEC filings., • Draft and review financial statement footnotes and related disclosures., • Coordinate quarterly and annual reporting processes across Finance, Legal, Tax, Treasury, and business partners., • Support preparation of MD&A and technical accounting disclosures., • Ensure reporting complies with SEC regulations and U.S. GAAP. Consolidation & Close Process • Support the monthly, quarterly, and annual consolidation process., • Review consolidation entries and intercompany eliminations., • Assist with legal entity integration activities following acquisitions., • Support financial statement preparation and reporting accuracy. Technical Accounting • Research, document, and conclude on complex accounting matters under U.S. GAAP., • Prepare technical accounting memoranda supporting significant transactions and accounting conclusions., • Lead accounting assessments related to:, • Revenue recognition (ASC 606), • Stock-based compensation (ASC 718), • Debt and financing transactions (ASC 470), • Business combinations and purchase accounting (ASC 805), • Consolidation and variable interest entities (ASC 810), • Equity transactions and earnings per share, • Monitor new accounting pronouncements and evaluate their impact on the company., • Maintain and update accounting policies and procedures. Mergers & Acquisitions • Lead or support accounting due diligence activities for acquisitions and strategic transactions., • Lead or assist with purchase price allocations and opening balance sheet analyses., • Prepare required accounting analyses and disclosures related to acquisitions and divestitures., • Coordinate with valuation specialists and external advisors. Internal Controls & Audit Support • Support SOX compliance efforts and control documentation., • Partner with internal and external auditors during quarterly reviews and annual audits., • Assist in identifying and implementing process improvements and automation opportunities., • Maintain strong documentation supporting accounting conclusions and SEC disclosures. Cross-Functional Leadership • Partner with Treasury on debt transactions and covenant reporting., • Partner with Human Resources and Legal regarding equity compensation programs., • Support commercial teams on revenue contract reviews., • Provide technical accounting guidance and training to finance personnel., • Mentor and develop junior accounting staff. Required • Bachelor's degree in Accounting or Finance., • CPA required., • Minimum 8+ years of progressive accounting experience., • Experience may reflect a combination of public accounting and industry/public-company accounting; candidates from either background will be considered., • Strong knowledge of:, • U.S. GAAP, • SEC reporting requirements, • Internal controls and SOX compliance, • Experience preparing or reviewing Forms 10-Q and 10-K., • Experience with technical accounting research and documentation., • Strong analytical, communication, and project management skills. Preferred • Experience working in a multi-national publicly traded company., • Public accounting experience (Big 4 or national accounting firm preferred)., • Experience with Workiva, OneStream, Hyperion, or similar reporting platforms., • Experience with ERP systems (e.g., SAP, Oracle, NetSuite, or similar)., • Technical accounting expertise, • SEC reporting proficiency, • Attention to detail, • Critical thinking and problem solving, • Leadership and team development, • Project management, • Effective written and verbal communication, • Ability to operate in a deadline-driven environment This role offers an opportunity to become a trusted technical accounting leader supporting SEC reporting, complex transactions, strategic growth initiatives, and financial reporting excellence.

Job Description Non-CDL Delivery Driver Vineland, NJ Location: 2631 Industrial Way Vineland, NJ 08360 Schedule: Monday - Friday; 1st Shift; No overnight travel; No OTR; Overtime is available Job Duties: Daily work assignments vary according to the company’s business needs, transactions and inbound scheduling and include, but are not limited to the following: • Operates a forklift to unload, receive, and put away inventory and load delivery vehicles, • Operates a Non-CDL box truck while making deliveries, • Pull, count, check and stage all orders for delivery in a timely manner, • Check all parts and equipment for accuracy and damage, • Deliver equipment and parts in a safe and timely fashion, • Responsible for shipping and receiving and ensuring the facility is well-maintained and clean Qualifications: • Candidates must be at least 21 years of age with a valid driver’s license and a clean driving record, • A minimum of 2 years of professional (non-CDL 26' box truck) driving experience, • Have previously passed the MVR and medical check, • Able to operate a forklift and pallet jack, • Able to lift up to 50 lbs, • Able to work independently and work well under pressure Peirce-Phelps has been proudly serving our communities since 1926. We are a distributor of residential and commercial HVAC equipment, building/home automation and energy management systems. Additionally, we stock all the parts and supplies required for installation and repair. We strategically and carefully partner with high-quality manufacturers that stand behind their products. Together, we create a solid bond that is long-lasting and provides consistency in quality products and services. This success can only be attributed to employing the best workforce in the industry, which you could be a part of! Why work with Peirce Phelps? • Highly competitive pay, • Comprehensive benefits package, • HSA available, • Wellness incentive program, • Medical, dental, vision, • 401k w/ company match, • 3 weeks paid vacation, • 6 Sick days, • 9 Paid holidays + 2 floating holidays, • Short and long-term disability, • Life insurance, • Supplemental insurance available, • Tuition Reimbursement., • Growth and advancement Opportunities, • For NJ Employment - starting pay rate for this position is $20/hr Learn more about the history of Peirce Phelps HERE. • Recruiters, please don't contact this job poster., • Do NOT contact us with unsolicited services or offers.

Company DescriptionBEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork!Job DescriptionAs a Senior Accountant II, you will play a critical role in ensuring the accuracy, integrity, and timeliness of our financial reporting. We are seeking a proactive, detail-oriented accounting professional with broad accounting expertise, strong systems and process knowledge, and the ability to thrive in a fast-paced, evolving global environment. This role requires a collaborative team player who is eager to contribute across multiple accounting functions while continuously improving processes and supporting organizational growth. You will serve as a digital transformation champion within the Finance organization by leveraging Microsoft 365, AI, automation, and data analytics tools to improve efficiency, controls, reporting quality, and decision-making.Key ResponsibilitiesEnsure the accuracy and completeness of monthly financial reporting and close activities.Prepare and post daily, weekly, and monthly journal entries.Prepare, review, and analyze balance sheet reconciliations, ensuring timely resolution of outstanding items.Review and analyze profit and loss accounts, identifying transactions requiring reclassification to the balance sheet.Record, classify, and summarize financial transactions in accordance with IFRS and company accounting policies.Support the timely preparation of monthly, quarterly, and annual financial statements and management reports.Perform financial analysis, develop reporting schedules, and validate data accuracy through advanced spreadsheet modeling.Conduct actual-to-budget and variance analyses, providing meaningful insights to management.Prepare and reconcile intercompany transactions and balances.Process accounts payable transactions related to intercompany activity.Assist with month-end and year-end close activities while identifying opportunities to improve efficiency and strengthen internal controls.Participate in special projects, process improvement initiatives, and cross-functional accounting assignments.Collaborate with Finance, Operations, and other business partners to support organizational objectives.Use Microsoft 365, AI tools, and automation capabilities to improve data quality, reduce manual effort, strengthen controls, and accelerate decision-making.Lead the identification and implementation of AI-enabled improvements across financial close, reconciliations, reporting, analysis, and recurring accounting workflows.Perform additional duties and special projects as assigned by the Senior Accounting Manager or Senior Director of Finance.Compensation Range: $110,000.00 - $120,000.00 annually. The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors.QualificationsRequired QualificationsBachelor's degree in Accounting, Finance, Management Information Systems, Business Analytics, Data Analytics, Business Administration, or a related field. Candidates with non-accounting degrees must demonstrate significant professional accounting experience and proficiency in financial reporting, accounting operations, and accounting principles.Minimum of 7 years of progressive accounting experience.Experience with Percentage of Completion (PoC) and project accounting.Strong knowledge of IFRS and financial reporting principles.Experience working with international exchange rates and secured funds transactions.Advanced Microsoft Excel skills, including complex formulas, pivot tables, lookups, and financial modeling.Ability to work across multiple accounting functions and support team members as business needs evolve.Excellent analytical and problem-solving skills with exceptional attention to detail.Strong organizational and time management skills with the ability to prioritize multiple deadlines in a fast-paced environment.Excellent written and verbal communication skills.Demonstrated ability to collaborate effectively across departments and with global teams.Positive, professional, and proactive approach with a continuous improvement mindset.Advanced proficiency with Microsoft 365 and productivity tools including Power BI, Power Query, and Power Automate.Demonstrated ability to leverage AI tools (Copilot) and emerging technologies to improve workflows, enhance decision-making, and drive greater efficiency within the role.Preferred QualificationsStrong knowledge of both GAAP and IFRS accounting standards.Experience with SAP Business One (SAP B1)Proven ability to support accelerated or streamlined month-end close processes.Experience within warehousing, distribution, logistics, manufacturing, or bulk material handling industries.Commitment Required: Able to set and meet goals; sincere care for others; overwhelming desire to win and to be part of a winning team.Additional InformationBEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents.401(k) with Generous Match: Secure your financial future with our competitive retirement plan.Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!Ancillary Insurances: Including vision, accident, and critical illness insurance. Generous Paid Time Off: Achieve the optimal work-life balance.Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.BEUMER is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, sex (including pregnancy and breastfeeding), gender, affectional or sexual orientation, gender identity or expression, transgender status, national origin, age, ancestry, disability (mental or physical), veteran status, genetic information, atypical hereditary cellular or blood trait, marital status, civil union status, domestic partner status, or any other status protected under local, state or federal laws. prohibits discrimination, harassment, and retaliation in all aspects of employment. This commitment applies to recruitment, hiring, training, promotion, compensation, benefits, discipline, termination, and all other terms and conditions of employment.By accepting an offer of employment with BEUMER, the employee agrees to abide by all policies and practices that promote a workplace free from discrimination and harassment, and acknowledges BEUMER’S commitment to diversity and inclusion. All your information will be kept confidential according to EEO guidelines.SummaryType: Full-timeFunction: Accounting/AuditingExperience level: Mid-Senior LevelIndustry: Accounting

About Analog DevicesAnalog Devices, Inc. (NASDAQ: ADI) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, AI, and software technologies into solutions that combat climate change, reliably connect humans and the world, and help drive advancements in automation and robotics, mobility, healthcare, energy and data centers. With revenue of more than $11 billion in FY25, ADI ensures today's innovators stay Ahead of What's Possible. Learn more at and on LinkedIn and X.Internal Job DescriptionSenior Product Engineer – RF & Mixed-Signal SystemsSummary:Join our industry-leading product engineering team driving next-generation RF transceiver technologies. As a Senior Product Engineer, you will play a critical role in evaluating, characterizing, and ensuring the performance of advanced mixed-signal ICs and transceiver systems. This position requires deep technical expertise, hands-on lab experience, and strong collaboration across design, test, applications, and marketing teams.Key ResponsibilitiesLead evaluation and characterization of ADCs, DACs, high-speed serial interfaces, and RF systems for cutting-edge transceiver products.Debug and analyze complex mixed-signal and RF systems across all operating conditions; document and present findings to design and cross-functional teams.Perform functional and performance testing of new silicon and embedded software, ensuring readiness for production release.Develop and automate test solutions using Python, MATLAB, LabVIEW, and other programming tools for RF and mixed-signal verification.Utilize precision measurement equipment (network analyzers, spectrum analyzers, oscilloscopes, signal generators) to establish RF, analog, and digital performance metrics.Provide recommendations on testability, manufacturability, and qualification readiness; support field quality initiatives.Interface as a central resource with design, applications, and marketing teams; engage directly with customers to resolve product issues.Analyze measurement data and contribute to system-level solutions for transceiver products.Minimum QualificationsBS or MS in Electrical Engineering or related field, with 5+ years of industry experience in RF/mixed-signal product engineering.Proven expertise in automating RF tests and working with advanced lab equipment (network analyzers, spectrum analyzers, signal generators, oscilloscopes).Strong programming and debug skills in Python, MATLAB, LabVIEW, and familiarity with C/C++ or similar languages.Deep knowledge of analog and RF circuits, high-speed serial interfaces, ADCs/DACs, and mixed-signal systems.Strong analytical and problem-solving skills; ability to manage multiple priorities in a fast-paced environment.Excellent communication skills and ability to work effectively in multi-disciplinary, global teams.#LI-PG1For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position – except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) – may have to go through an export licensing review process.Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group.EEO is the Law: Notice of Applicant Rights Under the Law.Job Req Type: ExperiencedRequired Travel: NoShift Type: 1st Shift/DaysThe expected wage range for a new hire into this position is $131,285 to $190,108.Actual wage offered may vary depending on work location, experience, education, training, external market data, internal pay equity, or other bona fide factors.This position qualifies for a discretionary performance-based bonus which is based on personal and company factors.This position includes medical, vision and dental coverage, 401k, paid vacation, holidays, and sick time, and other benefits.SummaryLocation: US, MA, Wilmington; US, NJ, Somerset; US, NC, DurhamType: Full time

Gather, analyze, and translate business needs into clear, actionable requirements. Develop comprehensive documentation including BRDs, FRDs, User Stories, Use Cases, Process Flows, and Acceptance Criteria. Serve as a liaison between business stakeholders, technical teams, and cross functional partners to ensure alignment throughout the project lifecycle. Support QA and UAT by validating requirements, reviewing test cases, identifying defects, and confirming solution alignment with business needs. Map, analyze, and optimize business processes; identify gaps, inefficiencies, and opportunities for automation or improvement. Perform data analysis to support decision making, insights, compliance needs, and reporting requirements. Evaluate solution options, assess impacts, and support stakeholder management, change adoption, and strategic planning. Master's degree in Science, Technology or Engineering (any); Computer Application is required. Work location: Somerset, NJ and various unanticipated locations throughout the U.S.

Job Description Millville, New Jersey | Field work | Contract, paid per work order | $25 to $55 per hour About Service Robot Co. Service Robot Co. helps businesses across all 50 states choose, deploy and maintain commercial robots, with 24/7 support. We supply all types of robots for all types of automation. We handle site assessments, robot selection, installation, system integration and team training. Purchase, financing and rental options are available, backed by ongoing maintenance and repairs. One partner from your first consultation through everyday operation. The role Visit customer sites to install, maintain, and repair commercial robots. You will work on site with support from a remote specialist. What you will do • Install robots and check that they work correctly., • Find and fix mechanical, electrical, and software problems., • Carry out scheduled maintenance., • Explain the problem and the repair to the customer., • Record each visit with photos, job notes, and customer sign-off., • Keep your tools and spare parts ready., • Follow site and equipment safety procedures. What we are looking for, • Practical experience fixing or maintaining equipment. Field service, appliance repair, low-voltage work, and facilities maintenance are useful backgrounds., • Reliability, clear communication, and accurate job records., • Willingness to ask for help and report mistakes., • Availability to drive to customer sites, work in different weather conditions, and lift equipment weighing up to 50 lbs. Previous robotics experience is not required. Training You will complete an online course through our Service Robot Co. Academy, followed by in-person training and the industry certifications needed for this role. The Academy is certificate training that we subsidize. Your first job is paid, with a specialist supporting you remotely. Share your work If you have a resume, portfolio, project links, photos, videos, or other examples of your work, please include them with your application. We would like to see something you have built, fixed, installed, or worked on. Work from a job, a course, or a personal project is welcome. Share only material you have permission to share. These are optional, so you can still apply if you do not have them.

Job Description Proconex is the exclusive Emerson Impact Partner for Emerson Automation Solutions in the Mid-Atlantic region. We provide a full portfolio of Process Automation Control Systems, Valves and Control Devices, and related technologies and services to a range of customers—in the Life Sciences, Chemical, Power, Refining, Oil & Gas, Food & Beverage, Paper, Metals, and other industries, as well as commercial enterprises and campus facilities. With three strategically located offices, Proconex maintains a deep dedication to its 200+ employees, a sharp focus on safety and quality, and the drive to deliver. VALVE TECHNICIAN / MECHANICAL FIELD TECHNICIAN Atlantic Valve Services (AVS) | Swedesboro, NJ & Northeast/Mid-Atlantic Region | Full-Time Build a Career in a Specialized, Respected Industrial Trade Are you a skilled trades professional looking for your next opportunity? Do you have hands-on experience as a mechanic, machinist, hydraulic technician, plant technician, or maintenance professional? Atlantic Valve Services (AVS) is looking for motivated, technically-minded individuals to join our growing team and develop into highly skilled Valve Technicians. Whether your background is in the military, heavy equipment repair, manufacturing, food production, refinery operations, hydraulics, automotive, shipyards, power generation, or industrial maintenance, we provide the training and support needed to build a long-term career in a specialized and respected trade. About Atlantic Valve Services Atlantic Valve Services (AVS) is a full-service safety relief and control valve repair center supporting customers throughout the Northeast and Mid-Atlantic region. We are a premier service provider for Emerson/Fisher control valves and an authorized assembler of Anderson Greenwood, Crosby, and Kunkle pressure relief valves. AVS provides repair, testing, calibration, diagnostics, upgrades, and field services for critical industrial facilities. Our technicians work on equipment that helps keep manufacturing plants, energy facilities, pharmaceutical companies, refineries, food production facilities, and industrial operations running safely and efficiently. Why Join AVS? • Paid hands-on training in a specialized, high-demand trade, • Factory training opportunities with industry leaders (Emerson, etc.), • Learn highly specialized skills valued across industries, • Work alongside experienced technicians and mentors, • Competitive pay with overtime opportunities, • Premium medical, dental, and vision benefits, • 401(k) with company match, • Stable, long-term career with clear advancement opportunities, • Clean, professional work environment, • Exposure to a wide range of industrial equipment and customer sites, • Opportunity to work on equipment critical to major industrial operations What You'll Do As a Valve Technician, you'll learn to inspect, maintain, troubleshoot, repair, and test industrial valves and related equipment used in critical process industries. Working alongside experienced technicians, you will: • Perform maintenance, inspection, and repair activities on industrial valves and related equipment, • Assist with the assembly and disassembly of control valves, safety relief valves, and isolation valves, • Learn diagnostic and troubleshooting techniques to identify equipment issues, • Conduct valve testing, calibration, and performance verification, • Read and follow technical procedures, drawings, and service documentation, • Complete service reports and maintenance records, • Support customer outages, maintenance projects, and field service activities, • Maintain high safety standards at customer facilities and AVS locations, • Collaborate with experienced technicians and engineers to continuously develop your skills We're Looking for Skilled Trades Professionals We actively recruit from diverse technical backgrounds. We encourage applications from: Military Veterans: • Marine Corps, Navy, Army, Air Force, and Coast Guard veterans, • Machinist's Mate (MM), Wheeled-Vehicle mechanics, Tank mechanics, Aviation and Avionic mechanics, • Vehicle and diesel technicians, Power generation technicians, • Shipyard personnel Industrial & Manufacturing Professionals: • Machinists and precision mechanics, • Hydraulic and pneumatic technicians, • Equipment technicians and maintenance professionals, • Millwrights and heavy equipment mechanics, • Manufacturing maintenance and production technicians, • Field mechanics and service technicians Plant & Facility Operators: • Food production plant technicians and operators, • Refinery technicians and mechanics, • Power plant and utility technicians, • Petrochemical and chemical plant technicians, • Pharmaceutical manufacturing technicians, • Water treatment and utility operators Other Mechanical Backgrounds: • Automotive repair and mechanics, • HVAC technicians transitioning to industrial work, • Diesel mechanics, • Equipment repair specialists, • Welders with mechanical aptitude, • Any mechanically inclined individual with strong work ethic and willingness to learn Previous valve experience is a plus, but it is NOT required. We're looking for people with strong mechanical aptitude, hands-on experience in skilled trades, and genuine interest in building a specialized career. Qualifications Required: • High school diploma or equivalent, • Strong mechanical aptitude and problem-solving ability, • Hands-on experience in a skilled trade (military service, manufacturing, maintenance, repair, plant operations, etc.), • Ability to use hand tools and basic mechanical equipment, • Willingness to learn and master a specialized industrial trade, • Strong work ethic and reliability, • Ability to work independently and as part of a team, • Commitment to workplace safety, • Valid driver's license and able to pass DOT test, • Ability to travel throughout the Northeast and Mid-Atlantic region as needed Preferred: • Shipyard, refinery, or plant experience, • Military mechanical experience, • Industrial maintenance or manufacturing experience, • Mechanical repair or troubleshooting background, • Experience with hydraulic, pneumatic, rotating, or process equipment, • Experience reading technical drawings, schematics, or maintenance procedures, • Prior valve, instrumentation, or controls experience, • Food production or manufacturing plant background Travel & Work Environment This position includes work in both shop and field environments. Travel throughout the Northeast and Mid-Atlantic region may be required depending on customer needs and project schedules. Candidates should be comfortable working in industrial facilities, performing physically active work, and occasionally working overtime. Ready to build a specialized career? Apply Now! We are proud to be an employee-owned organization. Through our ESOP, every team member shares in the growth and success of the company, fostering a culture of collaboration, accountability, and long-term rewards. Proconex offers a standout culture, fantastic work environment, and has very competitive benefits to include premium medical, 401K match, tuition reimbursement, and other unique incentives. When receiving e-mails from a Proconex or Valspec recruiter, you will only receive e-mails from addresses ending in @proconexdirect.com, @proconex.net or @valspec.net. Any other domains are impersonations and should be ignored. Candidates must be legally eligible to work in the United States without company sponsorship. Also, we are not interested in working on a corp-to-corp basis with other companies at this time. Any third-party unsolicited resume submission(s) will immediately become the property of Proconex. Proconex will not pay any fee to a submitting employment agency, person, or entity unless a signed agreement is established. Proconex is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, sexual orientation, gender identity, disability, protected veteran status or any other protected class. We are committed to providing a professional environment free of any discrimination or harassment, and we are proud to be a Drug-Free Workplace.

Job Description Location: 2631 Industrial Way Vineland, NJ 08360 Work Hours: Monday - Friday between 7:30am and 5:00pm; Overtime available. Peirce-Phelps has been proudly serving our communities since 1926. We are a distributor of residential and commercial HVAC equipment, building/home automation and energy management systems. In addition, we stock all the parts and supplies required for installation and repair. We strategically and carefully partner with high-quality manufacturers that stand behind their products. Together, we create a solid bond that is long-term and provides consistency in quality products and services. This success can only be attributed to employing the best workforce in the industry, which you could be a part of! Apply today for more information. The Counter Sales Associate will be a key aspect of the daily sales and operations. Success in this role will include thriving in a fast-paced, customer-centric environment while providing top-level customer service to our large customer base. As a Counter Sales Associate, you will: • Build relationships with our customers, • Create the perfect customer experience, • Interactive order entry, • Pick and consolidate orders, • Replenish the counter area, • Enjoy customer sales calls, • Receive career path training and advancement Qualifications: • A positive attitude, • A desire to succeed, • A willingness to learn, • Great customer service and communication skills About Us Peirce-Phelps is dedicated to employing the best workforce in the industry, building strong relationships with our suppliers and helping our customers succeed. We embrace the diverse experiences, backgrounds, knowledge and ideas that make up our company culture. Those experiences only strengthen our teams and our business. From our store locations to our e-Commerce and mobile platforms, our team has the tools to help you grow your career. Find out more about Peirce-Phelps at www.peirce.com. Why work with Peirce Phelps? • Highly competitive pay, • Comprehensive benefits package, • Medical, dental, vision, • HSA available, • Wellness incentive program, • 401k w/ company match, • 3 weeks paid vacation, • 6 Sick days, • 9 Paid holidays + 2 floating holidays, • Short- and long-term disability, • Life insurance, • Supplemental insurance available, • Tuition Reimbursement., • Career growth and advancement opportunities., • Starting pay rate for this position is $20+/hr DOE Learn more about the history of Peirce Phelps HERE. • Recruiters, please don't contact this job poster., • Do NOT contact us with unsolicited services or offers.