Trabajos building materials en Columbia, South CarolinaCrear alertas

POSITION SUMMARY: A Driver- CDL (B) is responsible for safely operating a collection truck, and providing prompt, courteous and complete waste removal services for customers. In addition, a Driver – CDL (B) is responsible for ensuring his or her vehicle is in compliance with the Company’s safety standards prior to operating the vehicle, ensures that all Company, state and federal regulations are adhered to at all times while operating the vehicle, and completes vehicle condition reports (“VCRs”) on a daily basis to ensure that any vehicle defects are repaired in a timely manner. PRINCIPAL RESPONSIBILITIES: • Perform complete pre- and post-operation inspection of the vehicle in accordance with Company policy to ensure tire pressure, fluid levels, safety equipment, gauges, and controls are in proper working order. Report any safety issues on standard reports., • Safely operate his or her heavy truck along his or her designated route and to the disposal site; read route sheet, follow map and service each customer as identified on the route sheet or as assigned by the dispatcher and/or supervisor., • Operate manual and/or automatic controls in accordance with Company safety policies and procedures to lift and load refuse, operate compactor and dispose of collected material at the designated facility., • Courteously interact with all customers, dispatchers and others on a daily basis to ensure all customer routes are serviced in a timely and professional manner., • Identify unsatisfactory waste containers and tag containers in accordance with applicable departmental procedures., • Continuously monitor waste for evidence of unacceptable waste., • Clean area around an accidental waste spill, ensuring adherence to all applicable safety standards and policies., • Continuously monitor the condition of the vehicle to ensure it is operationally ready at all times to minimize down time; clean waste from the packer blade and truck body (where appropriate) on each disposal trip., • Complete required route/productivity sheets, VCRs and other reports, as required., • Maintain adherence to required productivity standards for the department to ensure all customers are serviced in a timely and efficient manner., • Follow all required safety policies and procedures., • Actively participate in the Company’s ReSOP program., • Perform other job-related duties as assigned., • Good customer services skills to meet and exceed customer expectations; acts in a professional, courteous and cooperative manner toward customers and co-workers; works with a sense of honesty and trustworthiness., • Good time management skills to ensure assigned responsibilities are completed in an efficient and safe manner., • Good follow through ability; adheres to work schedule and follows through on challenges as they arise., • Ability to adhere to Company policies and rules set forth; promotes the Company’s safety standards; does not take inappropriate risks., • Maintains a feeling of pride in work; strives to achieve all goals. MINIMUM REQUIREMENTS: • Class B or higher Commercial Driver’s license with air brakes endorsement. Rewarding Compensation and Benefits Eligible employees can elect to participate in: • Comprehensive medical benefits coverage, dental plans and vision coverage., • Health care and dependent care spending accounts., • Short- and long-term disability., • Life insurance and accidental death & dismemberment insurance., • Employee and Family Assistance Program (EAP)., • Employee discount programs., • Retirement plan with a generous company match., • Employee Stock Purchase Plan (ESPP)., • Paid Time Off (PTO), • Benefits: https://jobs.republicservices.com/us/en/about-us/benefits The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company. EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law. ABOUT THE COMPANY Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world. In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills. Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer. Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it. Our company values guide our daily actions: Safe: We protect the livelihoods of our colleagues and communities. Committed to Serve: We go above and beyond to exceed our customers’ expectations. Environmentally Responsible: We take action to improve our environment. Driven: We deliver results in the right way. Human-Centered: We respect the dignity and unique potential of every person. We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGY Republic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation. With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers. Recycling and Waste We continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs. Environmental Solutions Our comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need. SUSTAINABILITY INNOVATION Republic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth. The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America. We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028. RECENT RECOGNITION Barron’s 100 Most Sustainable Companies CDP Discloser Dow Jones Sustainability Indices Ethisphere’s World’s Most Ethical Companies Fortune World’s Most Admired Companies Great Place to Work Sustainability Yearbook S&P Global

TMC is Now Hiring CDL-A Flatbed Drivers!Now Hiring CDL-A Flatbed Drivers!Home Weekends - No Experience Required! Earn Up to $100,000 Annually* (Must have a valid CDL-A license.) Why Choose TMC? • Earn up to $100,000+ annually*, • Average $1,350 - $1,600 per week, • Home weekends - our flatbed drivers typically run within a 1,200-mile radius of their home, • Sign-on bonus - up to $5,000 for experienced drivers, • Health insurance - medical, dental, vision, and prescription, • 401(k) with company match, • Top-quality Peterbilt equipment *Performance-based percentage pay - experienced drivers can earn more than $100,000 annually! Drive for the Best - Apply to TMC Today! Additional Benefits: • Weekly pay & direct deposit, • Paid vacation, • Employee Stock Ownership Plan (ESOP), • 401(k) with company match, • Paid orientation & training - $1,000 orientation pay for experienced drivers About TMC: With thousands of tractor-trailers running coast to coast, TMC Transportation is the largest employee-owned flatbed carrier in the U.S. TMC hauls every kind of flatbed freight, from all classes of building materials and steel products to machinery and everything in between • We hire all experience levels!, • Our Experienced Driver Orientation Program keeps you separated from newbies and is only 3-5 days long depending upon your experience level, • If you have limited or no flatbed experience, we will allow you to ride with a Driver Trainer to learn the ropes of flatbedding. All Orientation and time with a Driver Trainer is paid, • Round-the-clock support - Drivers are the greatest force on our team. Our quality fleet management is always working to help you succeed and meet your goals. We even offer personality-pairing for drivers and fleet managers to ensure satisfaction in your flatbed career, • Best-in-class training - TMC has been training students for almost 30 years & our Student Driver (Apprentice) training program is recognized as one of the best in the country! Requirements: • Valid Class A CDL, • No experience required!, • No recent DOT-reportable accidents or DUIs, • Military experience equivalency may be substituted for some requirements Start Your Career with TMC - Apply Today!

Job DescriptionWe are dedicated to delivering exceptional service to our customers. We're currently seeking motivated individuals to join our team as Non-CDL Box Truck Drivers. If you're passionate about driving and providing excellent customer service, we want to hear from you!Responsibilities: • Operate non-CDL Flatbed for delivery purposes., • Perform manual loading and unloading using hand trucks or pallet jacks, with assistance from a helper. Deliveries may include navigating flights of stairs at customer residences., • Will be responsible for delivering building materials, • Make approximately 8-10 stops per day.Schedule:, • Days: Monday to Friday, • Hours: 6:00 AM - 4:00 PM, • OT: After 40hrsCompensation:, • Hourly Rate: $18-21/hr - Depending on Experience, • Overtime: Paid after 40 hours per weekBenefits:, • Medical, dental, vision, • Pet InsuranceRequirements:, • At least 1 year of experience driving non-CDL vehicles., • Valid driver's license., • Forklift or Moffett Exp., • DOT Medical Card, • Ability to lift up to 100 pounds.Apply here, on our website or call 216.588.1055! www.pacedrivers.com Pace Driver’s, Inc. is proud to be an Equal Employment Opportunity employer. We celebrate diversity and do not discriminate based on race, religion, national origin, gender, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. PandoLogic. Keywords: Truck Driver, Location: Columbia, SC - 29202 , PL: 603385832

Overview: CoolSys solves the most complex challenges in refrigeration, air conditioning, heating, engineering, and energy management. With over 3,700 associates nationwide, we deliver tailored solutions to help businesses cut costs, improve equipment performance, and reduce emissions. Our services include HVAC and refrigeration equipment sourcing, installation, repair, maintenance, monitoring, and optimization. We also offer engineering design, energy resilience and consumption optimization, asset recycling, and seamless multi-site rollouts across states. Based in Southern California since 2007, CoolSys serves over 45,000 customer locations in industries like retail, food service, commercial, data centers, industrial, and pharmaceuticals. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: • Competitive pay: $75-95k, • Benefits: Medical, Dental, Vision and Prescription coverage., • Paid vacation, holidays, and floating holiday., • 401(K) with Company match., • Company sponsored life insurance, as well as optional AD&D, short and long-term disability., • Tuition reimbursement., • Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more., • Pet Insurance., • Legal Plan, and ID Theft Protection. Responsibilities: Project/Business Responsibilities: • Manages the Service P/L for assigned branch(s)., • Forecasts manpower requirements., • Effectively prioritizes customer calls and advises dispatch accordingly., • Ensures customer requirements are followed and calls are completed on a timely basis., • Ensures customer rules are accurately adhered to and approves work orders., • Reviews dashboards and financial reports and takes appropriate action., • Oversees the procurement of parts and supplies., • Maintains communication with customers and ensures their expectations are met., • Resolves issues or problems that impact customer satisfaction., • Manages and maintains fleet, parts and materials inventory, and resolves discrepancies or problems in a timely manner., • Develops and maintains long term relationships with customers and subcontractors. People Responsibilities: • Communicates company direction, sets expectations and holds team accountable for results., • Provides leaderships, builds a collaborative team and rewards accomplishments of the team., • Interviews, selects, hires, and oversees onboarding of supervisors, team leads and technicians., • Ensures technicians are scheduled and dispatched efficiently, based on skill level, location, and call volume., • Manages performance and provides training, coaching and performance feedback to Supervisors, Team Leads and Technicians., • Uses metrics to drive accountability and performance., • Ensures compliance of Service policies and procedures, including eSo, refrigerant tracking, time and attendance, etc., • Ensures use of PPE and the application of safe behavior, including driving, by all employees., • Ensures customer service and quality of work meets customer requirements and Source standards. Qualifications: Project/Business Management: • High school diploma, GED, or completion of trade program or technical school. College degree is a plus., • 10 + years of experience in the refrigeration/HVAC service, commercial construction, or a related industry., • Knowledge of commercial refrigeration and HVAC principles and practices, including service hour estimation, labor forecasting, and multiple disciplines involved in area of responsibility., • Proficiency in understanding and managing P&L., • Demonstrated business acumen., • Proficiency in managing multiple assignments, setting and balancing competing priorities with strong organizational skills and ability to multi task. People Management: • 5 + years of people management experience., • Strong leadership skills, with demonstrated experience managing a diverse and multi-discipline workforce., • Proficient in coaching, training, developing and building a team., • Proficient in managing time, delegating assignments and following through to ensure good results. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on and . CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Job Description Now is the best time to join Johnstone Supply. The Regional Manager serves as the strategic leader for a multi-branch region, driving sales execution, customer experience, employee development, and operational excellence. This role oversees P&L performance, process improvement, and regional leadership teams to ensure market share growth, profitability, and alignment with the company’s overall business strategy. Our customers are professional certified Technicians and Contractors who come to Johnstone for our product selection, expertise, and quality service. Johnstone is growing, and so can you. Position responsibilities: Overall Management of Region • Reviews and analyzes business reports (daily, weekly and monthly) by region and market for the purpose of identifying sales by market segment, by customer, by product category etc. in order to monitor progress, determine corrective action, and pro-actively identify opportunities for continued improvement toward Regional goals and the delivery of the customer value proposition., • Upon analyzing P&L and scorecard reports, leads meetings to communicate with Account Managers and Market Managers to ensure understanding of region/market progress towards established goals and the overall impact of the region relative to the Store Group in its entirety. Holds Market Managers and Branch Managers accountable for leading all branches within the market toward accomplishment of short and long-term business goals in partnership with regional operations leadership. Supports monthly Branch staff meetings to ensure branch leadership team is informed and knowledgeable regarding their Branch’s performance relative to all Balanced Scorecard metrics (people, process, customer, financial) and works with local leadership to develop action plans to drive short and long-term objectives., • Establishes, communicates and models performance expectations for Account Managers, Market Managers, Branch Managers and other subordinate team members. Ensures expectations are met by monitoring various business application reports, gathering feedback from customers, observing performance and taking corrective action or rewarding employees as necessary. Safeguards region for continued success through proper succession planning, cross training, and ongoing training and development for all employees., • Drives communication between Regions and Branch Support to ensure Branch Support understands the field’s needs to successfully deliver the Johnstone Advantage, and to ensure all employees understand the business plan (including marketing plan and sales plan) and how to accomplish it., • Performs special projects under the direction of the Vice President of Operations & Sales or a Senior Team Executive, as requested. Sales Management • Works in conjunction with outside Account Managers, Market Managers, and Branch Managers to forecast and determine customer needs. Works to increase market share and market penetration while maintaining a fragmented balance across customer and product segments. Drives the Johnstone Advantage to customer base., • Establishes, in conjunction with the Market Manager and Branch Manager, the annual sales and profitability goals for each branch and for the Market. Develops and implements sales plans to meet those goals. Regularly monitors performance against goals and takes corrective action where necessary., • Coaches and develops outside Account Managers in an effort to help each reach their top potential., • Ensure outside sales and inside sales are knowledgeable of and ready to support established sales programs, hot deals and special marketing promotions in order to attain or exceed sales budgets and profitability. Provides information regarding customer buying habits and needs to the Vice President of Marketing and Vendor Relations, the Product Managers and Purchasing Group on a regular basis., • Creates a business culture within the region of superior customer service that exceeds the customer’s expectations., • Visits Key Account decision makers and principles with the Account Managers to sell special sales and marketing programs in order to enhance “win-win” partnerships between customers and the Company designed to foster long-term commitments and continued business., • Resolves customer complaints and disputes in a timely, professional manner if such situations escalate beyond the Market Manager or Branch Manager level. Position requirements: • High School diploma or equivalent required; Bachelor’s degree (B.S./B.A.) in marketing, business, or related discipline preferred., • At least ten plus years’ experience in sales or branch operations management in a wholesale environment or equivalent combination of education and experience is required., • Five or more years’ experience leading and managing teams with experience managing outside sales teams preferred., • Strong leadership skills are critical in order to lead the sales and operations teams and to model expected employee behaviors with a sense of urgency., • Ability to develop and execute sales initiatives through sales force, • Knowledge of human resource management principles, including recruiting and hiring, training and development, delegating, coaching, and evaluating employees., • Ability to create and manage high-functioning teams and hold them accountable for end results., • Very strong analytical, planning and organization skills and abilities., • Ability to listen to customers and branch staff personnel to identify concerns and needs., • Excellent communication skills and the ability to influence attitudes and actions., • Skill in facilitating open lines of communication and win-win relationships., • Strong abilities to clarify company objectives and translate them to daily market and branch activities., • Expert knowledge of wholesale distribution operations, including order fulfillment, inventory control, customer service, showroom merchandising, shipping and receiving, and sales., • Ability to influence customers to partner with WGI in long-term mutually beneficial business partnerships., • Very knowledgeable in abilities to read, analyze and interpret financial P&L and Scorecard Reports., • Strong knowledge of PC-based applications (Excel, Word, Explorer) and business software (Eclipse and Mits)., • Excellent knowledge of inventory management principles and procedures, including procurement, storage, forecasting and handling dead inventory., • Excellent knowledge of sales and marketing processes and techniques to drive sales., • Excellent knowledge of the HVACR industry, contractor customer needs and product applications., • General knowledge of governmental regulations as applied to product distribution, including OSHA regulations, Worker’s Compensation, Hazardous Materials Handling., • Problem-solving skills: listening to, interpreting, and meeting the needs of others; diagnosing and rectifying problems., • Highly skilled in the ability to multitask and prioritize work., • Ability to develop and implement operational plans., • Ability to write reports, business correspondence, procedure manuals, and marketing pieces., • While multilingual skills are valued, English proficiency (written and spoken) is a core requirement for this position due to the nature of the work, safety regulations, and to ensure accurate communication and comprehension., • May spend significant periods of time traveling on business via auto or air travel. Travel is often limited to the geographical region of responsibility. Johnstone Supply is strongly interested in hiring a great candidate that exhibits work behaviors & values that are conducive to building and maintaining a strong and effective company culture. These behaviors include: • Safety: Always prioritizes safety, both at work and at home, while ensuring those who work for you work safely., • Customer Focused: Take the perspective of those we serve, anticipate their needs, and responding quickly., • One Team: We win together by collaborating with each other, focusing on the common goal, and leveraging the strengths of the team., • Own It: Take the initiative, act with a sense of urgency and pride, do things right the first time, and always act with integrity., • Innovate: Embrace and create change that drives continuous improvement and customer-valued solutions. At Johnstone Supply, we recognize that our employees’ growth, well-being, and success drives the company’s success. We offer a competitive wage, in addition to health and wellness benefits including customizable plans for medical, dental, vision coverage, and options for alternative care. We provide the resources you need to take charge of your well-being, including: • Paid Time Off (PTO) – 3 weeks of PTO for individual contributors and 4 weeks for leaders, • Safe Harbor 401(k) – 100% employer match up to 5% of base pay and immediately vests, • Holiday pay – we recognize and pay our employees for 7.5 holidays per year, • Employer subsidized medical, dental, and vision plans., • Employer paid life insurance and long-term disability, • Voluntary short-term disability, accident and critical illness insurance, • 24/7 Access to virtual care/telehealth options, and Parental Time Off, • Flexible spending accounts (FSA), • $100 wellness reward for completing annual health check-up, • Employee Assistance Program (EAP) for you, and your family, • Coverage for chiropractic, acupuncture, and massage therapy services, • Tuition reimbursement, up to $5,250 per year, • Employee referral bonus program – earn up to $4,000 per year, • Employee service milestone recognition program, • Employee discounts on products & retail discounts, • Variety of incentive plans for employees, • Bi-weekly pay days on every other Friday, • Opportunity to apply for the John M Shank Memorial Scholarship Fund, available to both Johnstone employees and children of employees We understand that our employees are the cornerstone of our success. Our commitment to continuous improvement & investment in our people is only matched by our commitment to superior customer experience. Johnstone Supply is North America’s leading wholesale distributor of HVACR equipment, parts, and supplies. Over the last seven decades Johnstone has grown into the industry leader with over 450 distributor branches and 6 distribution centers throughout North America resulting in over $4 billion in annual sales. We work with some of the largest companies in the world, including Daikin/Goodman, Honeywell, Emerson, Johnson Controls, Google, and Fujitsu, to provide contractors with world class products, technical expertise, and quality service. EOE & E-Verify Participating Employer.

Location: Holly Hill Cement Plant SC Job Req ID: 15466 Join our amazing team and contribute as a: \n Reliability Engineer II ABOUT THE ROLE Responsible for creating, implementing, and monitoring Condition Based Maintenance (CBM) programs. \n Relocation assistance provided for candidates outside this area. WHAT YOU'LL ACCOMPLISH \n\n • Responsible for monitoring reliability based systems including preventative maintenance systems, vibration analysis and condition monitoring.\n, • Participate in the creation of preventative maintenance routines (PMRs) and bill of materials (BOMs) for plant equipment.\n, • Management of the preventative/predictive maintenance programs (Inspection, Vibration, Oil Analysis, NDT, thermography, etc.) to ensure optimum equipment availability.\n, • Responsible for the preventative maintenance work order system with coordinated execution of the area operations and central maintenance teams.\n, • Provide leadership, guidance, and direction for reliability team and plant area teams in a manner consistent with our values.\n, • Accountable for providing leadership, development and coaching on individual performance to direct reports to achieve business results.\n, • Analysis and elimination of repetitive problems though root cause analysis, Pareto analysis, statistical review, FMEA and similar techniques.\n, • Responsible for the facilitation of continuous improvement processes around equipment availability and reliability.\n, • Support and guide sustainable improvements in MTBF of major equipment.\n, • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors.\n\n WHAT WE'RE LOOKING FOR \n Education: Bachelor's degree Field of Study Preferred: Mechanical Engineering \n Required Work Experience: 5-7 Years. Experience in heavy manufacturing environment is heavily preferred. Required Computer and Software Skills: SAP, Autocad, Project, Microsoft Office (Word, Excel, PowerPoint, Etc.) Travel Requirements: 0-10% Additional Requirements \n\n • Experience in FFT analysis of vibration spectra on a range of heavy industrial plant\n, • Experience in practical application of FMEA, NDT inspection techniques preferred\n, • Working knowledge of instrumentation, process controls, motors, starts, VFD's preferred\n, • Successful candidates must adhere to all safety protocols and proper use of company approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.\n\n WHAT WE OFFER \n This role is eligible for a $10,000 sign on bonus!! \n\n • Competitive salary\n, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings\n, • Employee Stock Purchase Plan \n, • Medical, Dental, Disability and Life Insurance \n, • Holistic Health & Well-being programs\n, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care\n, • Vision and other Voluntary benefits and discounts\n, • Paid time off & paid holidays\n, • Paid Parental Leave (maternity & paternity)\n, • Educational Assistance Program\n, • Dress for your day\n\n #LI-Onsite #LI-GC1 BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job Description COME AND JOIN THE CH TEAM BECAUSE OUR WORK MAKES A DIFFERENCE!!! Columbia Housing offers a very generous benefits package, including: • Health, • Dental, • Vision, • Term Life Insurance, • Long-term disability, • Flexible Spending Accounts, • State Retirement*, • 401K and 457 Plans, • Annual Leave Accrual, • Sick Leave Accrual, • 13 paid holidays, • FREE gym membership, • Alternative Work Schedule Options (including a 4-day workweek), if applicable, • Employee Assistance Program, • Apprenticeship Opportunity, if applicableSalary Range: $42,800 $51,300 $59,800Summary This position is responsible for managing the day-to-day operations of Columbia Housing’s fleet of vehicles and maintaining CH inventory. This position involves coordinating the movement of vehicles and goods, tracking inventory, managing schedules, and solving logistical problems. Specifically, the incumbent works closely with drivers, mechanics, and management to ensure that vehicles are functioning properly and meeting organizational needs, while following the Department of Transportation (DOT) requirements. The incumbent will also monitor and control inventory by overseeing, directing and coordinating the movement of supplies, products, merchandise and all other inventory. All activities must support Columbia Housing’s (“CH”) mission, strategic goals, and objectives. Essential Duties and Responsibilities The position duties and responsibilities listed below describe the general nature and scope of work. Other responsibilities, duties, and skills may be required and assigned, as needed. FLEET • Coordinates the vehicle fleet maintenance program, as directed by the SVP of Property Management and Maintenance Operations, while adhering to the requirements of the Department of Transportation (DOT)., • Develops and maintains schedules for vehicle maintenance and repairs. Coordinates with approved mechanics to arrange maintenance and repair services for vehicles., • Maintains all information pertaining to the vehicles, including their make and model, purchase date, current mileage, and any outstanding repairs that need to be made., • Coordinates vehicle reservations, usage, and maintenance requests., • Coordinates transportation for CH staff; receives requests for transportation; maintains proper documentation of requests., • Manages driver vehicle assignments and ensures compliance with all relevant regulations and standards., • Monitors and tracks vehicle inventory to ensure adequate supply levels., • Performs periodic vehicle inspections to ensure that they are in good working order., • Ensures that all CH vehicles are insured and registered, and that proper documentation is included in each vehicle’s compartment., • Assists Capital Assets with coordinating with insurance companies to file claims for damaged vehicles., • Reports vehicle accidents or any other incidents involving company vehicles to supervisor, human resources and Capital Assets., • Works with the human resources department to schedule employee training on company vehicles and/ or equipment., • Works with human resources on ensuring employees involved in accidents are taken to appropriate location for testing., • Coordinates with the accounting department to arrange for payment for services rendered on vehicles., • Prepares records on vehicle use following DOT requirements., • Maintains transportation plan and log according to DOT requirements., • Inspects vehicles regularly according to DOT requirements and manufacturer specifications., • Coordinates with management to develop and implement policies and procedures related to fleet management., • Monitors and analyzes fleet data to identify opportunities for improvement., • Maintains records of fuel usage and mileage for each vehicle. INVENTORY CONTROL • Establishes and maintains inventory control by ensuring inventory stock levels are appropriate;, • Maintains records of all inventories; research vendors cost and budget to recommend purchasing of supplies and materials; places approved orders; receives and tracks invoices;, • Assists with transferring inventory between sites and issues out inventory as needed., • Meets with vendors to acquire new products and places new orders, with approval., • Coordinates inventory deliveries, while managing inventory and maintaining databases and filing system., • Coordinates and scheduling the movement and storage of inventory to and from the appropriate locations;, • Identifies and reports slow-moving or inventory not used and with approval, arranges for the removal of the inventory., • Performs complete inventory checks of all stock and supplies, at least twice a year., • Ensures all documentation related to inventory flows is complete, accurate and filed correctly., • Identifies, analyzes and addresses gaps in inventory needs and processes, while documenting all related activities and completing forms and reports., • Assigns delivery/pickup stations and oversees the loading and unloading of deliveries., • Marks inventory with identifying information and organizes and sorts inventory according to category; tracks and manages inventory by completing regular cycle counts, • Identifies potential inventory shortages and communicates with supervisor;, • Receives and verifies accuracy of incoming inventory and resolving any discrepancies between paperwork and inventory received; inspects and ensures quality of incoming inventory., • maintains all records/logs relative to inventory., • Performs other related duties as required. Behavioral Competencies This position requires the incumbent to exhibit the following behavioral skills: Job Knowledge: Exhibits requisite knowledge, skills, and abilities to perform the position effectively. Demonstrates knowledge of policies, procedures, goals, objectives, operational entities, requirements, and activities as they apply to the assigned organizational entity of CH. Uses appropriate judgment & decision making in accordance with level of responsibility. Commitment: Sets high standards of performance; pursues aggressive goals and works hard/smart to achieve them; strives for results and success; conveys a sense of urgency and brings issues to closure; persists despite obstacles and opposition. Customer Service: Meets/exceeds the expectations and requirements of internal and external customers; identifies, understands, monitors, and measures the needs of both internal and external customers; talks and acts with customers in mind. Recognizes work colleagues as customers. Effective Communication: Ensures important information is passed to those who need to know; conveys necessary information clearly and effectively orally or in writing. Demonstrates attention to, and conveys understanding of, the comments and questions of others; listens effectively. Initiative: Proactively seeks solutions to resolve unexpected challenges. Actively assists others without formal/informal direction. Possesses the capacity to learn and actively seeks developmental feedback. Applies feedback for continued growth by mastering concepts needed to perform work. Responsiveness and Accountability: Demonstrates a high level of conscientiousness; holds oneself personally responsible for one's own work; does fair share of work. Teamwork: Balances team and individual responsibilities; exhibits objectivity and openness to others' views; gives and welcomes feedback; contributes to building a positive team spirit; puts success of team above own interests; supports everyone's efforts to succeed. Job Competencies • Knowledge of HUD, federal, state, and local laws and regulations, as well as CH policies and procedures related to the position., • Knowledge of DOT laws, regulations, and policies related to the position., • Knowledge of basic safety methods and techniques used in the transportation of people., • Knowledge of inventory, warehousing, and safety procedures., • Demonstrated skills in computer data entry and use of computerized barcode equipment., • Ability to relate to people of all income levels, background and race., • Ability to work independently and use sound judgment in decision-making and problem-solving., • Ability to understand and carry out oral and written instructions., • Ability to promote desirable standards for health, nutrition, safety, education and welfare of young children., • Ability to present ideas in a clear and concise manner, both orally and in writing., • Ability to maintain a good driving record., • Ability to work in less than ideal conditions, e.g. noise, high traffic areas, etc., • Ability to establish and maintain effective working relationships with co-workers, vendors, consultants, contractors, tenants, HUD, and local, state, and federal officials. Ability to communicate with people from a broad range of socio-economic backgrounds. Education and/or Experience Associate degree in business administration or related field and a minimum of four (4) years of progressively responsible experience in administrative or responsible clerical work related to fleet management and inventory control. An equivalent combination of education and experience may be considered. Incumbent must be familiar with industry regulations and safety standards, as well as have excellent communication and organizational skills. The position requires the incumbent to be familiar with and have worked with the Department of Transportation requirements for fleet management. This position requires regular driving for business purposes. This position requires the possession of a valid SC Driver’s License and the ability to be insurable under CH’s automobile insurance plan at the standard rate. Technical Skills To perform this job successfully, the employee should have proven experience driving company vehicles and familiarity with GPS devices. The employee should have strong computer skills (e.g. MS Word, Excel, PowerPoint, and Outlook). Must have the ability to learn other computer software programs as required by assigned tasks. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. To perform this job successfully, the employee is frequently required to sit and stand. Daily movements include sitting; standing; reaching, bending, and grasping; operating CH vehicles and operating computers and other office equipment; moving about the office; and attending onsite and offsite meetings The employee must be able to exchange information in person, in writing, and via telephone. The employee must occasionally transport up to 50 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position generally works in CH’s vehicles and on CH properties, which may cause the employee to experience a range in temperatures and other weather conditions. The noise level may be loud and the environment may be more hazardous than a standard office environment. This position may be required to work with contractors as well as CH tenants. The position requires the availability to work outside of the established CH working hours. Columbia Housing is a Section 3 Compliant Employer Columbia Housing is an Equal Opportunity Employer committed to providing employment opportunities without regard to an individual's age, color, disability, gender, gender expression, gender identity, genetic information, national origin, race, religion, sex, sexual orientation, political affiliation, marital status or veteran status.

Job Description Are you tired of being on the road for days or weeks at a time? Do you wish you could have a successful trucking career while also maintaining a consistent life at home? Drive for Carter Lumber and not only will you have a stable, predictable schedule that allows you to be home every night, you’ll have the opportunity to build your career to whatever you desire! We are a growing company and we want our people to grow right along with us. Our Story Carter Lumber was founded in 1932 by W.E. Carter. For 90 years, we have strengthened our company by staying true to our values, which include honesty, hard work, and putting people first. What started as a single lumberyard in Akron, Ohio, is represented today by seven brands servicing professional builders and homeowners across thirteen states with more than 160 locations. Despite our growth, we are still a family-owned company. Our core values and our people-first culture remain the same. Description: As one of our CDL Delivery Specialists, you will be responsible for transporting orders to local customer jobsites in a safe and timely manner using our well-maintained and company-owned fleet. You will ensure that daily delivery schedules are met while providing friendly and professional customer service. While on site, you will unload using dump bed or truck-mounted forklift to place the customer’s materials right where they need them. Requirements: • Previous delivery experience, preferably with building materials, • Experience operating a truck-mounted forklift, • An acceptable driving record and a current CDL license, • Familiarity with building materials and delivery equipment is preferred, • Ability to be a team player, • Experience with truck mounted forklift (TMF) is a plus Benefits (full-time employees) • Health, Dental, Vision (Single and Family Plans) available after 30 days of employment, • Short and Long-Term Disability, • Company-paid life insurance and AD&D, • Optional supplemental life insurance, • Company-match 401(k), • Vacation time and paid holidays, • Vendor incentives, • Room for growth; we promote from within!, • Military encouraged to apply! Powered by JazzHR yDNKNuILxV

Job DescriptionSalary: Company Mission Statement:To build up our communities, our clients, and each other by building trust into everything we do. Summary/Objective:Promotes the company mission statement byparticipatingin the safe and efficient operation of a telehandler while adhering to safety guidelines and completing required paperwork accurately and on time. EssentialFunctions: • Safelyoperatea telehandler to lift, move, and position materials and equipment according to project specifications., • Perform daily inspections of the telehandler to ensure it is in proper working condition, reporting any maintenance issues to theappropriate personnel., • Load and unload materials from trucks, trailers, and other vehicles, ensuring proper weight distribution and securing of loads., • Transport materials and equipment todesignatedlocations on the job site, following all safety protocols and traffic regulations., • Collaborate with other team members to coordinate material handling activities and ensure efficient workflow., • Maintain a clean and organized work area, including the telehandler and surrounding environment., • Adhere to all safety guidelines and procedures, includingalways wearingappropriate personalprotective equipment (PPE)., • Complete required paperwork and documentation accurately andin a timely manner., • Must record daily inspections and perform operator-level maintenance on the equipment. Competencies: • Ability to interpret and follow safety regulations and procedures., • Excellent hand-eye coordination and spatial awareness., • Effective communication skills, both verbal and written., • Physical stamina and strength to perform the duties of the job, including lifting and carrying heavy materials., • Attention to detail and a commitment tomaintaininga safe work environment., • Flexibility to work in various weather conditions and environments., • Musthave reliable transportation., • Must passdrugscreen., • Must be able to record daily worklog., • A Can Doattitude. Education and Experience: • At least 1 year telehandler or similar heavy equipment experience., • Experience working in construction, manufacturing, or warehouse environments., • Valid telehandler operator certification or license (if required by local regulations)., • Strong understanding of telehandler operation and maintenance procedures., • Familiarity with basic mechanical principles and equipment troubleshooting., • Knowledge of rigging and hoisting techniques., • Willing to become certified in First Aid and CPR. Benefits: • Competitive Benefits Package (health, dental, vision)., • 401(k) with company match., • Transparency in growth, pay, etc., • Career advancement., • Performance feedback., • Teambuilding events. SupervisoryResponsibilities:None. WorkEnvironment:This position isrequiredto work in a variety of conditions relative toconstruction jobsite environments and must be able to perform the physical requirements of the job, as assigned. Exposure toweatherconditions, heat,cold,etc. is expected. PhysicalDemands:Must be able to physically perform the basic life operational functions of climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions. Must be able to perform medium work exerting up to 100 pounds of force occasionally, and/or up to 20 pounds of forcefrequently, and/up to 20 pounds of force constantly to move objects. Mustpossessthe visual acuity tooperateequipment and motor vehicles, perform trades tasks, inspect the work of others, and review work for accuracy, neatness, and thoroughness. TravelRequired:Travel to/from multiple jobsites, projects, and offices. Minimal overnight or weekend travel. Valid US driver's license required. AdditionalEligibilityRequirements:None. WorkAuthorization/SecurityClearanceRequirements:Authorized to work in the United States. Affirmative Action/EEOstatement:Harper GCprovides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Harper GCcomplies withapplicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Electrician – U.S. Army Base Fort JacksonCompetitive Wages and an INSURANCE ALLOWANCE! Top reasons to work at EMI Services, a subsidiary of TechFlow: • Paid Time Off - Vacation, Sick & Federal Holidays, • Non-seasonal- steady work Electricians on the Fort. Jackson team come from all areas of Columbia. Primary responsibilities of the Electrician are providing electrical services to include repair and/or replacement needs; installing, maintaining and upgrading electrical systems and equipment. The Electrician assist other skilled trades in the maintenance or repair of equipment for the distribution, or utilization of electric energy. The ideal EMI Electrician has well rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. Salary $27.29 /hr. plus $4.93 fringe benefits used towards insurance and 401k! See ALL the fantastic benefits you receive as an employee of EMI below!! Key Responsibilities • Assemble, install, test, and maintain electrical or electronic wiring, equipment, and fixtures, • Troubleshoot and diagnose malfunctioning systems, apparatus, and components, • Connect wires to circuit breakers, transformers, or other components, • Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes, • Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, • Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes, • Install ground leads and connect power cables to equipment, • Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes, • Perform physically demanding tasks, such as digging trenches to lay conduit and moving and lifting heavy objects, • Provide preliminary cost estimates for materials and services, • Maintain current electrician's license or identification card to meet governmental regulations, • Performs other related duties as assigned Essential Skills • Thorough knowledge of electrical theory and methods, materials, tools, equipment and systems used in the electrical trade, • Thorough knowledge of applicable state and federal codes and regulations pertaining to the electrical trade, • Knowledge of building architectural/structural elements including; alterations and repairs, • Must be able to read and understand blueprints as appropriate to trade, • Adaptable and flexible in work situations, • Prioritizes tasks to ensure completion in a timely manner, • PRACTICES WORKPLACE SAFETY in the use of tools, equipment, and supplies - Including proper use of personal protective equipment (PPE) Requirements • High school diploma or equivalent, • 3+ years’ experience maintenance electrician experience to include 2 years at a journeyman level, • Experience must be in an industrial or commercial facilities maintenance environment, • Duty Phone, • Valid driver’s license compliant with REAL ID Act or are you willing and able to obtain one, • Pass a pre-employment drug screening and background check, • Regular, dependable attendance, • U. S. citizenship to obtain and maintain access to military installations Physical Requirements • Must be able to lift up to 50lbs unassisted, • Use of hands, reaching with hands and arms, talking, and walking, • Prolonged periods of sitting, bending, squatting, standing, twisting, or stooping, • Climbing ladders and entering confined spaces, • May spend long hours in awkward positions which can cause physical discomfort and strain, • May stand for long periods and frequently work on ladders and scaffolds, • Work both indoors and outdoors in various temperatures (some extreme) and weather conditions., • Electricians risk injury from electrical shock, falls, and cuts, • Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Preferred Qualifications • Certified journeyman Click this link to follow EMI Services on Facebook Benefits As a team member at EMI, you’ll enjoy: • Generous benefits package consistent with Service Contract Agreement, • Insurance Allowance, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Employee Stock Ownership Plan (ESOP), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Federal Holidays), • Short Term and Long Term Disability, • Term Life Insurance, • Safety Allowance, • Uniforms, • Tuition Reimbursement, • Non-seasonal- always steady work!, • Referral program- Join our team then bring your friends What Sets EMI Apart EMI is an industry-leading provider of DOD base operation support services, facilities maintenance, and logistics. Our goal is to contribute to the repair and maintenance of buildings and equipment. EMI consistently delivers cost-saving through best value innovations and quality service that exceeds our clients’ expectations. The Right Partner: EMI has grown by gaining our customers’ trust and our employees’ loyalty. We’ve successfully performed over 60 service contracts and we understand the unique challenges facing today’s military. We offer exceptional responsiveness and a strong commitment to customer satisfaction. We demonstrate this commitment by consistently earning some of the highest customer satisfaction ratings in the industry. The Right Team: The EMI team includes over 250 high-achieving professionals, administrative and trades personnel deployed in various locations throughout the United States. At times, we augment our in-house capabilities with proven and capable business partners. The Right Approach: EMI brings vast expertise and proven solutions to augment our clients’ operations. We provide a platform that delivers seamless mission support and exceptional customer service in a very cost-effective and repeatable solution.

Job Description Production Specialist Location: Columbia, South Carolina Part-Time | $15/hour | Monday–Friday | 1:00 PM – 5:00 PM Why Work With Us? We are currently seeking a dependable and detail-oriented Production Specialist for a growing production and printing environment in the Columbia area. This is a great opportunity for someone who enjoys hands-on work, staying organized, and working in a fast-paced team environment. For the right candidate, this role has the potential to grow into a full-time permanent position. ✨ Consistent weekday schedule ✨ Opportunity for long-term growth ✨ Hands-on production environment What You’ll Do: As a Production Specialist, you will assist with preparing printed materials and ensuring products are completed accurately and efficiently. Attention to detail and the ability to stay productive in a fast-paced setting are key to success in this role. Your Day-to-Day: • Cut, finish, and prepare printed labels and materials, • Ensure accuracy and quality control of all completed products, • Package and ship customer orders in a timely manner, • Organize and prioritize workflow to meet daily production deadlines, • Assist with filing and administrative support as needed, • Maintain a clean and organized workspace, • Work collaboratively with team members to complete projects efficiently What We’re Looking For: • Strong attention to detail and organizational skills, • Ability to work efficiently in a fast-paced environment, • Dependable attendance and reliable transportation, • Ability to work both independently and as part of a team, • Positive attitude and willingness to learn, • High school diploma or GED required, • Previous printing or production experience preferred, • Familiarity with Canva or Adobe Illustrator is a plus Preferred Skills: • Basic math skills, • Strong time management and workflow organization, • Ability to meet daily production goals, • Team-player mindset with the ability to work independently when needed Why This Role Stands Out: This is a great opportunity for someone looking to gain hands-on experience in a production environment while building toward a potential long-term career opportunity. We are excited to speak with you about your future — please apply below and we will be in contact with you ASAP! Company DescriptionWhy Join Us: We are an established well performing branch in Columbia, and are looking for highly motivated individuals to join our team and make a meaningful contribution. The Columbia branch offers the best of both worlds: the flexibility and endless upside opportunity for growth of a new branch, combined with the experience, know-how, and resources of a leading organization! We believe people are a company's number one asset, and in addition to a competitive base salary, we offer the opportunity for additional earning potential through annual performance bonuses. But more importantly, we offer an excellent work environment, characterized by service excellence, a high sense of camaraderie and genuine recognition for hard work and performance.Why Join Us:\r\nWe are an established well performing branch in Columbia, and are looking for highly motivated individuals to join our team and make a meaningful contribution. The Columbia branch offers the best of both worlds: the flexibility and endless upside opportunity for growth of a new branch, combined with the experience, know-how, and resources of a leading organization!\r\nWe believe people are a company's number one asset, and in addition to a competitive base salary, we offer the opportunity for additional earning potential through annual performance bonuses. But more importantly, we offer an excellent work environment, characterized by service excellence, a high sense of camaraderie and genuine recognition for hard work and performance.

Job DescriptionJoin Amrize as a Maintenance Planner II, Plant Outages and help construct what's next. If you're ready to put your skills to work on projects that matter - and build a career with a company that's building North America - we want to hear from you! ABOUT THE ROLE The primary objective of this position is to improve the efficiency and productivity of the Amrize maintenance workforce, service companies & contractors by managing complex maintenance projects in a timely fashion. The position will create complex and large scale maintenance projects and deliver them to employees with detailed job plans, including technical specifications, machinery history, parts and tools lists, and safety procedures in a very organized fashion. As well as by working with team members and individually to review each work order and job site to insure that the work is reasonable and valid, that no influencing constraints are present and that all the preparatory works are performed before job scheduling. Relocation assistance provided for candidates outside this area. WHAT YOU'LL ACCOMPLISH • The Maintenance Planner II is responsible for the implementation of more complex and larger scale plans in the Amrize Maintenance Management System (MMS) - e.g., MAC/SAP in all aspects of maintenance activities. From work identification through planning, scheduling and execution, working with other planners to divide work out appropriately., • The Maintenance Planner II is responsible for the accuracy and continuous updating of maintenance master data - part numbers, bills of materials, work order history, etc. within the Maintenance Management System and partnering with the Maintenance Manager to identify and reconcile any discrepancies., • The Maintenance Planner II is responsible to ensure the equipment maintenance strategy for predictive and preventative maintenance, repair and annual maintenance, as established by the Maintenance Manager, is realized in the daily, weekly and monthly maintenance plan., • The Maintenance Planner II is responsible for adding pertinent information to work orders, as required, to facilitate the comprehension of the execution team. This includes defining a clearly the scope of work to be performed, establishing the preparatory work required prior to scheduled equipment down time, developing a detailed job plan with all the work sequences involved to adequately complete the repairs, as well as equipment downtime and work-hours required, including partnering with other planners to resolve issues and identify opportunities., • The Maintenance Planner II is responsible for determining the cost involved for parts and supplies for each work order and ensuring that such costs are communicated and forecasted accurately to maintenance management., • The Maintenance Planner II will work closely with procurement and warehousing to ensure that all nonstock parts and materials as required by the job plan., • The Maintenance Planner II will lead the annual budgeting process and monthly forecasting for maintenance spending., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR Education: Bachelor's degree with at least 5 years of required experience or at least 8 years of equivalent experience with HS Diploma / GED. Field of Study Preferred: Mechanical Engineering Required Work Experience: 5 years Required Technical Skills: Microsoft Office Travel Requirements: 10% Additional Requirements: • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Employee Stock Purchase Plan, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program, • Dress for your day #LI-Onsite #LI-GC1 Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job DescriptionSalary: $29.00-$35.00 W.B Guimarin & Co. Inc. currently has an opportunity for CommercialHVAC TECHNICIANin the Columbia, SC area. We are looking for energetic, technically capable, dependable and customer-focused HVAC Technicians. Whether you are building your career or bring 15 years of field experience, we offer a stable, professional environment where quality work is valued and supported. What you will do Perform troubleshooting and service operations on various HVAC systems to diagnose problems or possible issues and perform preventative maintenance to customers HVAC systems to include: • Test electrical circuits or components for continuity, using electrical test equipment., • Test pipe or tubing joints or connections for leaks, using pressure gauge or soap-and-water solution., • Join pipes or tubing to equipment and to fuel, water, or refrigerant source, to form complete circuit., • Reassemble and test equipment following repairs., • Repair or replace defective equipment, components, or wiring., • Layout and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools., • Install, connect, and adjust thermostats, humidistats and timers, using hand tools., • Obtain and maintain required certifications., • Ability to identify basic trade materials by size, shape and function., • Able to safely use small power tools and hand tools., • Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions. Education and Key Requirements • Ideal candidate would have at least 3+ years of Commercial HVAC experience but will accept if only residential., • Should have Air Cooled Chiller Experience., • Acceptable driving record and valid South Carolina Driving License, • New Employee and Random drug testing required., • Proficient in PC based computer systems and tablet/smart phone technology., • Excellent communication skills both verbally and written., • Ability to read and interpret blueprints and details; perform basic mathematical computations and use measuring tools., • Ability to work skillfully with both hands constantly; independently safely lift and carry objects weighing up to 25 pounds routinely, 50 pounds frequently, and 80 pounds occasionally; climb and maintain balance on ladders and scaffold., • New Employee Fit for Duty physical required. Benefits • $29-$40 per hour, based on experience., • Health, Dental, Vision, Life and other insurance options., • 401k and have a great 401k matching program., • Paid time off and Holiday pay., • You will be provided a company vehicle. Apply online or call/text Kimberly Redmond at 803-667-1851 for more information. Equal Employment Opportunity Employer minority/female/veteran/disabled.We are a Drug-Free Workplace.

Job Description If you enjoy working with a team, outdoors, and with your hands, then this is a great opportunity to get your foot in the door of a booming industry! We’re looking for people who don’t shy away from hard work and who are dedicated to what they do. There’s no better time than now to join this industry and there’s no better company than Carter Lumber. Our Story Carter Lumber was founded in 1932 by W.E. Carter. For 90 years, we have strengthened our company by staying true to our values, which include honesty, hard work, and putting people first. What started as a single lumberyard in Akron, Ohio, is represented today by seven brands servicing professional builders and homeowners across thirteen states with more than 160 locations. Despite our growth, we are still a family-owned company. Our core values and our people-first culture remain the same. Description: You will assist contractors and do-it-yourselfers with the selection and loading of their order, pull and stage materials to be picked up and/or delivered, help maintain the inventory in the Yard by conducting cycle counts, and keep the Yard organized and clean. Equipment used includes a forklift and if you haven't operated one previously, we will train you and help you attain certification. Requirements • Customer service experience, • Friendly personality, • Familiarity with building materials is helpful, • Ability to be a team player, • Ability to work outside in all conditions Benefits (full-time employees) • Health, Dental, Vision (Single and Family Plans) available after 30 days of employment, • Short and Long-Term Disability, • Company-paid life insurance and AD&D, • Optional supplemental life insurance, • Company-match 401(k), • Vacation time and paid holidays, • Vendor incentives, • Room for growth; we promote from within!, • Military encouraged to apply!IND123 Powered by JazzHR iTtwpLgvoB

Job DescriptionDescription: Jim Hudson Automotive Group is a family-owned and operated multi-franchise dealer group with all the most popular brands such as Audi, Cadillac, Buick, Chevrolet, GMC, Lexus, Toyota, Acura, and Ford. We have served the greater Columbia, SC area since 1980. Mr. Hudson's firm commitment to customer service has formed the foundation of all our great dealerships as we continue to be recognized as one of the top dealership groups in the country. We believe culture makes a difference and we strive to build lasting relationships with our employees, customers and community. We are seeking a motivated and customer-focused Wholesale Parts Representative to support to our Columbia-area parts departments. This role is ideal for someone who enjoys building relationships, thrives in a fast-paced environment and is eager to grow within the automotive industry. We believe our employees are our greatest asset. As such, we treat all employees with respect and appreciation for their contributions to the company. We offer: • Pay: $55-$90k/yearly, with bonus opportunities depending on performance, • Medical, Dental and Vision Insurance, • $25K Employer Paid Life Insurance, • Competitive Pay, • Disability & Accident Insurance, • 401(k) Retirement Plan - with employer match, • Employee Assistance Program, • Employee Assistance Fund, • Christmas Bonus, • Flexible Scheduling, • Corporate Chaplain, • Paid Vacation and Personal Leave, • Paid Holidays, • Career Advancement Opportunities, • A Positive and Professional Work Environment, • Mileage Reimbursement Responsibilities – Wholesale Parts Representative: • Provide support to multiple parts departments within the Columbia market, • Build and maintain strong relationships with wholesale customers, • Assist with order processing, communication, and overall customer satisfaction, • Serve as a reliable point of contact for parts-related needs, • Visit Body Shops in the Columbia, Myrtle Beach, Charleston, Greenville/Spartanburg areas as designated by the parts managers at Jim Hudson Automotive Group., • Provide reports to the Jim Hudson parts managers of the visits that were made and the outcome of those visits., • Provide merchandising materials to the body shops from both Jim Hudson Automotive Group and the manufacturers., • Provide wholesale customers with any special programs that are being offered by the manufacturers that Jim Hudson Automotive represents., • Provide feedback immediately to specific parts managers if a customer has immediate needs from a specific Jim Hudson dealership., • Other duties as assigned Requirements: Qualifications/Requirements – Wholesale Parts Representative: • Strong grasp of basic business principles and customer service practices, • Self-motivated with the ability to work independently, • Friendly, professional demeanor with excellent communication skills, • Professional appearance and strong work ethic, • Mileage Allowance for transportation reimbursement., • Valid US driver's license, • Applicants must pass pre-employment testing to include background checks, MVR, and drug screening We are an equal opportunity employer and prohibit discrimination/harassment with regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionJob Title: Construction Superintendent Job Description The Construction Superintendent oversees all field-related activities on assigned construction projects, ensuring work is completed safely, on schedule, within budget, and to the required quality standards. This role works closely with project management and other stakeholders to coordinate daily operations, resolve issues, and maintain strong relationships with customers, architects, consultants, and subcontractors. Responsibilities • Oversee all day-to-day field operations on the construction site, including coordination of labor, materials, and equipment., • Ensure strict adherence to jobsite safety policies and procedures, promoting a safe working environment for all personnel., • Monitor project progress against the construction schedule and take proactive action to keep the project on time., • Control field-related costs by monitoring labor, materials, and subcontractor performance to support budget objectives., • Maintain high standards of workmanship and quality control across all phases of construction., • Work closely with the Project Manager to communicate field status, address challenges, and support overall project goals., • Coordinate and oversee the work of subcontractors to ensure they meet project specifications, schedule, and quality requirements., • Maintain effective, professional relationships with customers, architects, consultants, and subcontractors throughout the project., • Identify and resolve field issues promptly, escalating matters to the Project Manager when necessary., • Ensure compliance with applicable codes, regulations, and project specifications on the jobsite., • Document relevant site activities and communicate key updates to the project team as needed.Essential Skills, • Proven experience in construction supervision or construction management, with responsibility for field operations., • Strong knowledge of construction practices, methods, and sequencing for building projects., • Experience working on federal construction projects or similar highly regulated environments., • Thorough understanding of jobsite safety practices and regulations., • Ability to interpret and work from construction drawings, specifications, and related documents., • Effective communication and interpersonal skills to collaborate with project management, customers, architects, consultants, and subcontractors., • Strong organizational and time-management skills to manage multiple tasks and priorities on site., • Ability to monitor and support cost control, schedule adherence, and quality assurance in the field., • OSHA 30 certification (OHSA30) or equivalent safety credential.Additional Skills & Qualifications, • Background in construction management or a related field., • Experience coordinating multiple subcontractors on complex projects., • Demonstrated ability to build and maintain positive relationships with project stakeholders., • Problem-solving skills to address field issues quickly and effectively., • Detail-oriented approach to documentation, safety, and quality control.Work Environment This role is primarily based on active construction sites, requiring frequent presence in the field to oversee daily operations. The work environment involves exposure to typical construction conditions, including outdoor work, varying weather, noise, and active equipment. The Superintendent collaborates closely with the Project Manager and interacts regularly with customers, architects, consultants, and subcontractors on site. Appropriate safety gear and attire are required in accordance with OSHA 30 standards and company safety policies. Job Type & Location This is a Permanent position based out of Columbia, SC. Pay and Benefits The pay range for this position is $120000.00 - $130000.00/yr. Medical/Dental/Vision/401k Workplace Type This is a fully onsite position in Columbia,SC. Application Deadline This position is anticipated to close on May 28, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionJoin Amrize as a Maintenance Supervisor, Cement and help construct what's next. If you're ready to put your skills to work on projects that matter - and build a career with a company that's building North America - we want to hear from you! ABOUT THE ROLE To coordinate and supervise mechanical maintenance activities to achieve the highest level of quality, safety and effectiveness to maximize equipment availability. Relocation assistance provided for candidates outside this area. WHAT YOU'LL ACCOMPLISH • Follow the rules and regulations defined by the company as well as legal requirements; support the elaboration of safety standards for their area, control releases and follow all environmental regulations., • Systematic inspections of all assigned plant equipment., • Analysis of data collected, completed work orders, and process data in order to initiate appropriate maintenance work orders which include a detailed scope of work., • Non-systematic inspections (repetitive problems, validate work requests, daily incidents)., • Familiar with precision maintenance technologies such as laser alignment and dynamic balancing., • Comfortable, at a hands on level, with welding techniques and practices for industrial equipment., • Document and monitor equipment history files., • Tracking, analysis, and recommendation for equipment performance, cost, and life., • Providing direction to the maintenance and purchasing groups regarding technical purchases and equipment selection., • Ensuring inventory and source of spare parts are consistent with plant equipment reliability and economic constraints., • Ensure implementation of equipment modification and maintenance projects with respect to costs and schedule., • Development of long term equipment maintenance strategies., • Quality Assurance of Execution work done on and off site, and of materials received., • Participate in and lead problem-solving task forces as required., • Improve plant mechanical and infrastructure equipment in order to meet or exceed plant reliability and production targets., • Provide technical support for plant activities and the maintenance functions., • Coach/mentor plant employees., • Follow up on completed work to ensure equipment operability and job site cleanliness., • Communication with pertinent operations departments., • Deal with and find resolution to conflicts or problems in the maintenance department., • Promotion of and participation in the plant safety program., • The Supervisor will give constructive feedback and coaching as required to maintain a high degree of professionalism within the group., • Directing of contractors in all areas of plant maintenance as required., • Preparing and presenting information on upgrades and restrictions with operations group., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR Education: High school diploma or equivalent or 5-7 years of equivalent experience Additional Education Preferred: Bachelor's degree Field of Study Preferred: Industrial Maintenance Required Work Experience: 3 - 5 years of industrial maintenance experience or cement industry experience Additional Requirements: • Strong communication skills (written and oral), • Strong leadership skills, • Well organized, • Ability to prioritize and evaluate, • Must work well under pressure, • Strong mechanical aptitude, • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Employee Stock Purchase Plan, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program, • Dress for your day #LI-Onsite #LI-GC1 Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job Description Walker White Mechanical Is Hiring: Entry-Level Mechanical Apprentices Build a career. Get paid to learn. No student debt required. Walker White Mechanical, a trusted leader in HVAC, plumbing, and sheet metal fabrication in the Greater Columbia, SC area, is now accepting applications for our 2026 Entry-Level Apprenticeship Program. This four-year paid apprenticeship provides hands-on, classroom, and on-the-job training in Sheet Metal, Plumbing, HVAC, and/or Pipefitting, setting you up for a long-term, rewarding career in the skilled trades. Why Choose Walker White Mechanical? Earn While You Learn • Starting pay of $16/hour, • Guaranteed raises every six months Debt-Free Education • All training, books, and education are 100% paid for, • No tuition. No student loans. Hands-On Experience • Work side-by-side with experienced tradespeople, • Learn on real projects using industry-standard tools and equipment Career Stability & Growth • Skilled trades are in high demand, • Clear career paths with long-term job security Flexible Start Dates • Hiring up to 30 apprentices, • Start dates available now through September 2026 What You’ll Learn & Do • Assist journeymen and experienced professionals on HVAC, plumbing, pipefitting, and sheet metal projects, • Read and interpret blueprints, drawings, and schematics, • Safely use hand and power tools, equipment, and materials, • Follow all job-site safety standards and protocols, • Build the technical, problem-solving, and teamwork skills needed for a successful career over the next four years Who Should Apply? • High school seniors or recent graduates (we’ll work around your graduation schedule), • Individuals with little or no experience—we provide all training, • Anyone who enjoys hands-on work, learning new skills, and building something tangible If you’re motivated, reliable, and ready to start a career—not just a job—this opportunity is for you. Program Start: September 2026 � You can begin working and gaining experience immediately! Walker White Mechanical is an equal opportunity employer and encourages applicants from all backgrounds to apply. Ready to Build Your Future? Apply today and take the first step toward a rewarding, well-paid career in the mechanical trades with Walker White Mechanical.

Job Description The Building People, LLC, has a position open for a full-time Project Support Technician in Columbia, SC. The Engineering Technician shall assist provide the customer with technical support and inspection services relating to maintenance, repair, or alteration of buildings, utilities, parking areas, roadways, and other work/projects on both leased and owned properties. Responsibilities/Duties • Utilize Facilities Management software to review estimates submitted by contractors for maintenance, repair, construction, and other work to assure conformance with customer requirements. Ensures that proposals are technically sound and in compliance with Army regulations., • Performs technical review & evaluation of plans and reports required to be submitted by the contractor including: Preventative Maintenance Plans for building structures, Quality Assurance Plans, as-built drawings, shop drawing submissions, and change order requests., • Reviews drawings and specifications developed by A/E firms for adherence to design requirements, code limitations, and civil, structural, architectural, and engineering fundamentals and principles., • Prepares cost estimates, technical specifications, preliminary sketches, & scopes of work for the contract purchase of complex repair and construction items, designs, and plans for alterations, remodeling, and repairs to various types of facilities, machinery, and equipment, new construction, and the development of contracts with organizational policies and procedures., • To include estimating the cost of manpower and material, estimating length of time the projects will require, determining and analyzing alternatives when appropriate., • Prepares contract modifications and design deficiency reports., • May be required to make site visits for the purpose of studying conditions/gathering information to be used in preparation of drawings, etc., • Other duties as assigned. *This position will not have supervisory responsibilities. Required Experience & Skills To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Detailed knowledge of methods and techniques of engineering and the construction, application, properties, operation, and limitations of engineering systems, processes, structures, machinery, devices, and materials., • Knowledge and experience of HVAC systems, machinery, plumbing/piping, ventilation, fire protection, digging, shoring, lighting, and similar types of equipment and systems., • Experience conducting building inspections/facility condition assessments., • Must possess practical working knowledge and experience to develop detailed specifications, cost estimates, and project schedules., • Must be able to read and interpret drawings and blueprints., • Ability to work independently, efficiently, and prioritize effectively in order meet project deliverables and deadlines. Must be flexible and be able to adapt to rapidly changing requirements and timelines., • Familiarity with standard CMMS systems, RS Means & various industry estimating tools, Auto-CAD, MicroStation, and Microsoft Suite., • Must be able to read and accurately interpret contract documents., • Must always be able to communicate effectively and in a professional manner. Physical Demands - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee may be asked to walk/stand/bend/climb for extended periods. The employee may occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. May be asked to drive for several hours during the course of site inspections/investigations. Work Environment - The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee will normally work in a temperature-controlled office environment, with frequent exposure to electronic office equipment. During visits to areas of operations, may be exposed to extreme cold or hot weather conditions. Is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and loud noise. Required Education • Bachelor's degree (B. A.) from an accredited college or university and a minimum of three (3) years of experience, or five (5) plus years of related experience and/or training or equivalent combination of education and experience. Certificates, Licenses, Registrations, Clearance: • Currently favorable, or eligible for a National Agency Check with Inquiry (NACI) clearance, in accordance with AR 38067., • Valid Driver’s License., • EEP, CEM, or Tridium N4 certifications preferred but not required.

Job Description St. Clair Construction Company (an affiliate of American Community Developers) is actively recruiting a Superintendent to work in the Columbia, SC area, This position will report directly to the Vice-President of Construction having responsibility for all new- construction opportunities. Responsibilities will include, but are not limited to the following: • Lead and manage the on-site construction team, coordinating and overseeing all work on-site, leading weekly progress meetings., • Coordinate scheduling of subcontractors, consultants, inspectors and vendors to complete the project on time., • Monitor work and materials to ensure quality control standards are met at various stages of the project., • Communicate with the project team and support each subcontractor to execute their job duties effectively and efficiently., • Perform inspections or schedule inspectors to meet the varying compliance regulations., • Maintain a written daily log of visitors, job actions preformed, materials expended, manpower present and problems resolved (RFI’s, field reports, field orders etc.)., • Identify and resolve problems and conflicts, organizing meetings, cooperating with team members in various roles necessary., • Monitor the job site so it is organized, clean and safe, free of hazards., • Create and maintain a safety plan and standards for the job site., • Work with MIOSHA or safety consultants as necessary., • Work with Project Manager to help create and maintain schedule., • Create 1-4 week look-ahead schedules., • Communicate continuously with subcontractors and vendors. Skills and Abilities: • Proficient with Microsoft Office suite, Procore Project Management Software, excel spreadsheets and internet research tools. Embraces technology and innovation., • Must understand fire ratings and comply with code requirements for the life-safety of the building., • Understands and embraces a culture of safety in carrying out all responsibilities., • Enthusiastic, positive attitude, motivated to learn with a strong work ethic., • Extremely organized, ability to prioritize, effective at time and workflow management., • Detail-oriented and able to meet deadlines., • Assertive and self-motivated., • Works well in a fast-paced team environment., • Knowledgeable in reviewing contracts and their terms and conditions, reviewing for scope., • Good reading comprehension for technical documents, such as plans and specifications, safety regulations and good understand of building code., • Embraces “ownership” mentality., • Excellent communication, organization and interpersonal skills. Preferred Education: • Associates Degree in Construction Management, Engineering, Architecture, or equivalent work experience., • 10 years plus of experience as a Superintendent with experience in Multi-Family Construction., • Must have a valid driver’s license.Company DescriptionSt. Clair Construction Company is a General Contractor based in Detroit MI and has been in the construction industry for over 30 years. St. Clair Construction specializes in apartment rehabilitation & new construction projects and has rehabilitated over 100 apartment properties throughout the country. St. Clair Construction is growing company and is always looking to add talented people to our team.St. Clair Construction Company is a General Contractor based in Detroit MI and has been in the construction industry for over 30 years. St. Clair Construction specializes in apartment rehabilitation & new construction projects and has rehabilitated over 100 apartment properties throughout the country. St. Clair Construction is growing company and is always looking to add talented people to our team.

Excellent opportunity to join a leading, national credit card processing company that has over a decade of industry experience. Slice Merchant Services offers innovative payment processing solutions to merchants. Slice has put together a comprehensive package of products and services. Slice delivers a consultative approach on the best platforms and equipment most suitable for each merchant. Slice Merchant Services is seeking driven, ambitious outside sales professionals to join our most aggressive and lucrative Sales Representative Program ever offered. Demonstrate your passion and sales skills by offering businesses in your local community substantial savings and upgraded state-of-the-art equipment. Get Paid while you learn an exciting new business in merchant services sales, weekly commissions and monthly bonuses; Our top performers make well over a 6-figure income. To ensure your success, you will have a dedicated sales manager & support team, continued results-driven training, WHAT THE COMPENSATION PACKAGE OFFERS: • UNCAPPED EARNING POTENTIAL, • AGGRESSIVE COMMISSIONS, • LARGE DAILY/WEEKLY/MONTHLY BONUSES, • RESIDUALS, • VARIOUS SELF-SOURCE BONUSES, • OUR SUCCESSFUL SALES AGENTS MAKE OVER $100K WITH OUR MULTIPLE REVENUE STREAM COMPENSATION PACKAGE UNMATCHED FEATURES THAT WE OFFER: • IN-DEPTH ONGOING TRAINING WITH EXCELLENT SALES MANAGEMENT, • PRE-SET COMPANY APPOINTMENTS (TRUE TRIPLE CONFIRMED LEADS), • PROVEN SALES PROCESSES THAT ARE RESULTS DRIVEN, • FULL SUITE OF PROFESSIONALLY BRANDED MARKETING MATERIALS & PRESENTATION TOOLS, • ANYTIME LIVE MANAGER ASSISTANCE, • ONLINE TRAINING & DOCUMENTS LIBRARY, • E-SIGN APPLICATION OPTION (RAPID & EASY) EXPERIENCE THAT WE ARE LOOKING FOR: • At least 2 years of business-to-business (B2B) sales experience preferred, • Excellent verbal, written, interpersonal, relationship building and presentation skills, • Strong work ethic with a drive to succeed, • Ability to self-source your own leads through a combination of cold calling and networking, • Proven outside or field sales experience with a track record of hitting or exceeding sales goals BELOW ARE A PLUS BUT NOT REQUIRED: • Cold calling sales ability, with assertive, positive, persistent style, • Bilingual, • Motivated self-starter with effective time management skills, • Goal-oriented and ambitious with capacity and drive to each and exceed quotas WHAT YOU WILL DO: As an Outside Sales representative with Slice Merchant Services, you will present our most popular and cutting-edge Dual Pricing Program to merchants offering them a revolutionary way to accept credit/debit cards. This program offers merchants to eliminate their current credit/debit card processing fees once and for all. This provides substantial savings for the merchant and makes it easy for you to make sales daily and reach your goals. • Develop strong business relationships with business owners, by cold calling small to medium-sized businesses, • Collaborate with your Sales Manager to prepare and present competitive sales proposals, • Attend assigned pre-set company appointments If you read all the way down here, you are most likely a great fit for the opportunity. This is a 1099 commision-only role APPLY NOW!

Job Description Job Title: HVAC Service Technician Status: Full Time, Non-Exempt (Eligible for overtime) Reports To: Service Manager or Manager of Technical Operations Work Schedule: Monday – Friday- based on customer needs Position Purpose: The primary purpose of the HVAC Service Technician is to provide preventative maintenance, start-up, warranty, and repair services on light commercial and industrial air conditioning equipment. Strong emphasis on customer service. This position may occasionally involve after hour call outs in order to provide emergency repairs. Hoffman Mechanical Solutions, Inc. is a company focused on being #1 in the HVAC industry in providing the most innovative HVAC solutions through superior design and customer service. HVAC Service Technician Essential Duties and Responsibilities: • Service a variety of HVAC products and equipment and ensure customer satisfaction., • Read and understand blueprints, equipment manuals, and engineering specifications in order to properly diagnose and repair units., • Use a variety of hand-tools and specialty equipment typical of the commercial HVAC Service trade., • Identify, analyze, diagnose, and repair systems and products at customer’s location., • Survey customer site for properly operating equipment and report any deficiencies found. Provide sales leads to internal associates as necessary., • Perform preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepare in advance for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials, and coordinating various trades for on-site work., • Diagnose/troubleshoot inoperable equipment and develop action plan for repairs and problem resolution., • Determine replacement parts required, secure materials, and complete repairs on a timely basis. Return any non-used or refundable parts for credit., • Interact face to face with customers to ensure proper and accurate communications exist., • Document all work performed by accurately completing field service reports, equipment log sheets, etc., • Complete and submit all required paperwork on a timely basis., • Operate and be diligent in properly caring for and maintaining a company vehicle., • Provide technical support to customers., • Flexible to work overtime/weekends as necessary in order to meet customer requirements., • Limited travel required but may include occasional overnight stays., • Stay informed on industry news and trends, products, services, competitors and relevant information about existing and emerging technologies, and the latest product-line developments. Attend company training seminars to become familiar with product lines., • Conduct oneself in a professional manner as a positive representative of the company both to the customer and public. Knowledge / Experience / Critical Skills • Education/Experience – Associate’s Degree or equivalent from a Technical / Trade School with a certificate in Heating, Ventilation, and Air Conditioning., • Minimum of Three (3) years related experience preferred., • Operational knowledge of computers and Microsoft Office software preferred., • Ability to read, comprehend, and write simple instructions and short correspondence. Ability to effectively present information in one-on-one and small group situations., • Ability to add, subtract, multiply, and divide in all units of measure, using whole number, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to understand data presented in a graphical format such as pie charts, bar graphs, etc., • Ability to recognize problems and develop the most cost effective solution. Ability to collect data, establish facts, and draw valid conclusions., • Must pass pre-hire requirements including background check, motor vehicle report, and drug screening., • Must possess valid drivers’ license., • Must possess EPA mandated card for safe refrigerant handling. Universal certification preferred. Physical Demands • In order to properly perform the duties of this job, the employee is regularly required to stand, use hands in order to finger/grasp/handle/feel, talk, and hear. The employee frequently is required to walk, reach, stoop, kneel, crouch, and/or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 75 pounds. This positions requires close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • This position requires frequent working outdoors, inside mechanical/equipment rooms, and possible extreme weather conditions. This position is regularly exposed to live voltage, moving mechanical parts, and heavy equipment. Frequent exposure to wet and/or humid conditions, elevated and/or precarious work places, fumes or airborne particles, outside weather conditions, risk of electrical shock and vibration. Occasional exposure to toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the work environment is typically loud. Reasonable Accommodations Statement: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Mechanical Solutions, Inc. No phone calls or drop-ins, please. EEO Employer/Vets/Disabled

Job Description Are you a Boiler Service Technician searching for new experiences? ICON Boiler continues to grow as a top-tier boiler installer and service provider across the Southeast. We take pride in all we do and in our Associates which is why we offer competitive pay and compensation, benefits, growth opportunities, and more! The Boiler Service Technician-Level 4 is a senior-level role responsible for expert service, maintenance, and upgrades of hot water and steam boiler systems in commercial and industrial settings. This position requires advanced troubleshooting skills, extensive experience with dual-fuel burner setups and combustion tuning, and a deep understanding of control and motor wiring. Candidates must be proficient in 3-element feedwater systems, parallel positioning controls, and analog circuit/transmitter diagnostics. Additionally, this role demands knowledge of 3-parameter trim systems, O2 trim installation, and hands-on experience with advanced control system upgrades. The ideal technician delivers top-tier performance, reliability, and service excellence to our customers. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction. • Lead expert-level service, maintenance, and upgrades of boiler systems in complex environments., • Demonstrates a strong knowledge of burner setup., • Demonstrates a strong knowledge of combustion management on dual fuel systems, • Demonstrates a strong knowledge of working on 3-element feedwater systems, parallel positioning controls., • Ability to diagnose and resolve issues with analog circuits and transmitters, • Knowledge of 3-parameter trim systems and O2 trim controls., • Execute advanced control system upgrades and retrofits., • Provide coaching & guidance to other technicians on boiler repairs., • Performs preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspect vehicles by checking vehicle condition and literature supplies., • Maintains vehicles by keeping records of service manuals, scheduling, and completing repairs and maintenance service., • Maintains tools and equipment by inspecting for signs of wear., • Documents work by completing paperwork on each job and maintaining files., • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need., • Keeps current all manufacturers' products concerning installation, operation, maintenance, service, and repair., • Provides technical support to customers., • Be knowledgeable with the products and services offered by Brady and become effective in the sales of those products and services., • Flexibility to work overtime/weekends, as required. TEAMWORK: • Demonstrate and promote a spirit of cooperation and teamwork throughout the Company, • Continually look for ways to improve our processes and ability to serve our customers effectively, • Improve personal performance on a continual basis CUSTOMER SERVICE: • Provide responsive, professional and diplomatic customer service, • Answer customer calls and correspondence quickly and pleasantly, • Communicate with customers in a friendly, professional, and patient manner, • Perform all duties with the goal of building and maintaining long-term customer relationships, • Immediately address any customer's concern and requests the involvement of other Company personnel as required SAFETY: • Follow all company safety programs and report any non-compliance to your Team Leader, • Notify Team Leader or Safety Manager of any unsafe conditions, • Proper PPE equipment must be used at all times when necessary, • Report all accidents and injuries to your Team Leader and HR immediately, • All monthly training topics on safety completed and done during the month due QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: Associate degree or equivalent from a two-year college or technical school in Heating, Ventilation, and Air Conditioning; 8-10 years of related experience in the field. COMPUTER SKILLS: Microsoft Word, Microsoft Outlook CERTIFICATES, LICENSES, REGISTRATIONS: Valid driver's license, Universal EPA certification LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The physical demands of the position include occasional sitting; frequent stooping, crouching, kneeling, balancing, and climbing; and constant standing, walking, reaching, and gripping. Material handling demands include lifting from floor level to overhead, with occasional lifting up to 115 lbs., frequent lifting up to 50 lbs., and constant lifting up to 25 lbs., placing the position in the Very Heavy Physical Demand Classification (PDC). Must be able to talk and hear. Vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Ability to wear standard necessary Personal Protective Equipment that is required by statute or risk assessment, for protecting worker safety. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position requires working outdoors, in mechanical/equipment rooms and possible extreme weather conditions. While performing the duties of this job, the associate is regularly exposed to moving mechanical parts and heavy equipment. The associate is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; risk of electrical shock (high voltage); and vibration. The associate is occasionally exposed to toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the work environment is usually loud. EEO STATEMENT: Brady strives to provide an environment free of discrimination as part of our mission to care for each other, our customers, and our community. We provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. OTHER REQUIREMENTS: • Ability to pass drug screening, • Ability to prove US employment eligibility

Job Description Job Title: Variable Refrigerant Service Technician Reports to: Variable Refrigerant Director of Technical Operation FLSA Status: Full Time, Non-Exempt (Eligible for overtime) We are 100% employee-owned through an Employee Stock Ownership Plan (ESOP). This is a retirement benefit for our employees that is wholly paid for by the company in addition to 401(k) options for employee contributions. There are approximately 7,000 ESOPs in the United States, governed by the IRS and the U.S. Department of Labor. Research indicates that ESOP companies tend to grow faster in sales and employment. ESOP employees tend to have 2.2 times as much in retirement savings as employees in traditional companies. Position Purpose: The primary purpose of the Variable Refrigerant Service Technician is to provide job site surveys during equipment installation, startup/commissioning of new equipment and systems, warranty service, owner direct preventative maintenance, and troubleshooting/repair services on variable refrigerant air conditioning equipment. This work involves both heat pump and heat recovery variable refrigerant systems including the system control network. This work also includes associated ancillary equipment such as dedicated makeup/outdoor air units. Hoffman is currently the manufacturer’s representative for Daikin Variable Refrigerant equipment. While Daikin is our primary brand and most of our workload, we also provide end user service support for numerous other brands of variable refrigerant equipment. Strong emphasis on customer service. This position may occasionally involve after hour call outs to provide emergency repairs. Provide guidance and direction to administrative personnel to effectively plan, schedule, coordinate, etc. all activities related to field variable refrigerant service and construction/replacement work. Hoffman Mechanical Solutions, Inc. is a company focused on being #1 in the HVAC industry in providing the most innovative HVAC solutions through superior design and customer service. Employment at Will: Nothing herein is intended to create a contract of employment or to guarantee employment for a definite duration. Variable Refrigerant Service Technician Duties and Responsibilities: • Service a variety of HVAC products and equipment and ensure customer satisfaction. Heavy emphasis on variable refrigerant equipment and systems., • Read and understand blueprints, equipment manuals, and engineering specifications to properly diagnose and repair units., • Use a variety of hand-tools and specialty equipment typical of the commercial HVAC Service trade., • Perform job site visits to monitor installation of new equipment. Provide technical support to installing contractor and report installation defects to management as needed., • Provide start up and commissioning service upon completion of construction. Support installing contractor to resolve problems that prohibit proper startup and commissioning. (i.e. piping leaks, communication faults, improper equipment mounting, improper piping installation, etc.), • Perform routine system preventive maintenance by utilizing manufacturer specific data logging device to analyze system performance. Must be able to understand the data and analyze in detail so minor problems such as faulty sensors are found prior to significant equipment damage., • Respond to service calls and utilize manufacturer specific data logging device to troubleshoot and diagnose variable refrigerant equipment and systems. Must be able to find root cause of failure and must be able to make the necessary repairs., • Identify, analyze, diagnose, and repair other non-variable refrigerant systems and products at customer’s location., • Survey customer site for properly operating equipment and report any deficiencies found. Provide sales leads to internal associates as necessary., • Perform preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepare in advance for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials, and coordinating various trades for on-site work., • Diagnose/troubleshoot inoperable equipment and develop action plan for repairs and problem resolution., • Determine replacement parts required, secure materials, and complete repairs on a timely basis. Return any non-used or refundable parts for credit., • Interact face to face with customers to ensure proper and accurate communications exist., • Document all work performed by accurately completing field service reports, equipment log sheets, etc., • Complete and submit all required paperwork on a timely basis., • Operate and be diligent in properly caring for and maintaining a company vehicle., • Provide technical support to customers., • Flexible to work overtime/weekends as necessary to meet customer requirements., • Limited travel required but may include occasional overnight stays., • Stay informed on industry news and trends, products, services, competitors, and relevant information about existing and emerging technologies, and the latest product-line developments. Attend company training seminars to become familiar with product lines., • Conduct oneself in a professional manner as a positive representative of the company both to the customer and public. Knowledge/Experience/Critical Skills Required: • Education/Experience – associate degree or equivalent from a Technical/Trade School with a certificate in Heating, Ventilation, and Air Conditioning. Minimum of Five (5) years related experience preferred or an equivalent combination of education and experience., • Operational knowledge of computers and Microsoft Office software preferred., • Ability to read, comprehend, and write simple instructions and short correspondence. Ability to effectively present information in one-on-one and small group situations., • Ability to add, subtract, multiply, and divide in all units of measure, using whole number, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to understand data presented in a graphical format such as pie charts, bar graphs, etc., • Ability to recognize problems and develop the most cost-effective solution. Ability to collect data, establish facts, and draw valid conclusions., • Must pass pre-hire requirements including background check, motor vehicle report, and drug screening., • Must possess valid drivers’ license., • Must possess EPA mandated card for safe refrigerant handling. Universal certification preferred. Physical Demand Requirements: • In order to properly perform the duties of this job, the employee is regularly required to stand, talk, hear and use hands/fingers in order to grasp/handle/feel. The employee frequently is required to walk, reach, stoop, kneel, crouch, climb up and down ladders and/or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 75 pounds. This position requires close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • This position requires frequent working outdoors, inside mechanical/equipment rooms, regularly being exposed to extreme inside/outside weather conditions to include extreme hot and/or extreme cold. This position is regularly exposed to live voltage, moving mechanical parts, and heavy equipment. Frequent exposure to wet and/or humid conditions, elevated and/or precarious workplaces, fumes or airborne particles, risk of electrical shock and vibration. Occasional exposure to toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the work environment is typically loud., • Standing: Frequently, • Walking: Frequently, • Sitting: Occasionally, • Stooping: Frequently, • Handling/Fingering: Frequently, • Climbing: Frequently, • Bending: Frequently, • Pushing/Pulling 12 lbs. or less: Frequently, • Lifting/Carrying 10 lbs. or less: Frequently, • Lifting/Carrying 11-50 lbs.: Frequently, • Lifting/Carrying 51-75 lbs.: Occasionally, • Reaching Outward: Frequently, • Reaching Above Shoulder: Frequently, • Squatting/Kneeling: Frequently, • Driving: Frequently This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Mechanical Solutions, Inc. EOE/Disabled/Veterans

Job Description HVAC Controls Technician– U.S. Army Base Fort JacksonCompetitive Wages and Employer Paid Health Benefits! Top reasons to work at EMI Services, a subsidiary of TechFlow: • Non-seasonal- Always steady work, • Paid Time Off - Vacation, Sick & Federal Holidays Heating Ventilation and Air- Conditioning (HVAC) Controls Technician applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers’ manuals or similar documents. Work requires Building Automation to set up, troubleshoot, repair, test and calibrate electronic components for EMCS (Energy Management Control System) computer control; troubleshoot, maintain, modify and repair heating, ventilating and air conditioning systems and equipment. Building Automation will have a thorough understanding of Psychometrics, the psychometric chart as it relates to air temperature and humidity. Building Automation recognizes probable interactions of other related programs with the assigned program(s) and is familiar with related system software and computer equipment. The programs developed or modified typically are linked to several other programs in that the output of one becomes the input for another. Solves conventional programming problems. This position may provide technical guidance to lower level Programmers, Technicians and Mechanics. Salary $100,000 - $110,000 (DOE) plus employer-paid insurance! See ALL the fantastic benefits you receive as an employee of EMI below!! Key Responsibilities • Monitor and adjust the full range of heating, cooling, ventilation, and refrigeration equipment, • Design and implement modifications to the interrelation of files and records within programs in consultations with higher level staff, • monitor the operation of assigned programs and respond to problems by diagnosing and correcting errors in logic and coding, • implement and/or maintain assigned portions of a scientific programming project, applying established scientific programming techniques to well-defined mathematical, statistical, engineering, or other scientific problems Essential Skills • Work independently under specified objectives, • apply judgment in devising program logic and in selecting and adapting standard programming procedures, • Resolve problems and deviations according to established practices, • Understanding of Psychometrics, • psychometric chart as it relates to air temperature and humidity, • Recognize probable interactions of other related programs with the assigned program(s) and is familiar with related system software and computer equipment, • programs developed or modified typically are linked to several other programs in that the output of one becomes the input for another, • Knowledge and proficiency of the standard practices, materials, tools, and equipment used in the troubleshooting, repair and maintenance of commercial and industrial grade HVAC equipment, • Knowledge of various energy management systems, heating, ventilation systems, air conditioning and refrigeration systems, • Knowledge-based competencies required to satisfactorily perform the functions of the job, • includes: indoor air monitoring equipment and interpret resulting data; standards for design and construction; air conditioning and heating codes; hazards and safety precautions, • PRACTICES WORKPLACE SAFETY in the use of tools, equipment, and supplies used in repair of HVAC equipment., • Including proper use of personal protective equipment (PPE) Requirements • High school diploma or equivalent, • 4+ years of experience: to set up, troubleshoot, repair, test and calibrate electronic components for EMCS (Energy Management Control System) computer control, • troubleshoot, maintain, modify and repair heating, ventilating and air conditioning systems and equipment, • Experience in installing, calibrating, troubleshooting and replacement of control systems, • Must be able to demonstrate experience in Johnson Controls Facility Explorer (Niagara 4), CCT, Metasys Platforms, and Distech, • Knowledge in other platforms such as Alerton, Inet, and Hvac Pro (N2) would be a plus, • Must be able to obtain a N4 Certification if you do not already have one, • EPA Universal Refrigeration License, • Regular, dependable attendance, • Valid driver’s license compliant with REAL ID Act or are you willing and able to obtain one, • Pass a pre-employment drug screening and back ground check, • U.S citizenship to obtain and maintain access to military installations Physical Requirements • Must be able to lift up to 50lbs unassisted, • Use of hands, reaching with hands and arms, talking, and walking, • Prolonged periods of sitting, bending, squatting, standing, twisting, or stooping, • Climbing ladders and entering confined spaces, • Work both indoors and outdoors in various temperatures (some extreme) and weather conditions • Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Click here to follow EMI Services on Facebook Benefits As a team member at EMI, you’ll enjoy: • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Employee Stock Ownership Plan (ESOP), • Company Vehicle for Local Commute, • Paid Time Off (Vacation, Sick & Federal Holidays), • Short Term and Long Term Disability, • Term Life Insurance What Sets EMI Apart EMI is an industry-leading provider of DOD base operation support services, facilities maintenance, and logistics. Our goal is to contribute to the repair and maintenance of buildings and equipment. EMI consistently delivers cost-saving through best value innovations and quality service that exceeds our clients’ expectations. The Right Partner: EMI has grown by gaining our customers’ trust and our employees’ loyalty. We’ve successfully performed over 60 service contracts and we understand the unique challenges facing today’s military. We offer exceptional responsiveness and a strong commitment to customer satisfaction. We demonstrate this commitment by consistently earning some of the highest customer satisfaction ratings in the industry. The Right Team: The EMI team includes over 250 high-achieving professionals, administrative and trades personnel deployed in various locations throughout the United States. At times, we augment our in-house capabilities with proven and capable business partners. The Right Approach: EMI brings vast expertise and proven solutions to augment our clients’ operations. We provide a platform that delivers seamless mission support and exceptional customer service in a very cost-effective and repeatable solution. #emiservices

Job Description Are you a Boiler Service Technician searching for new experiences? ICON Boiler continues to grow as a top-tier boiler installer and service provider across the Southeast. We take pride in all we do and in our Associates which is why we offer competitive pay and compensation, benefits, growth opportunities, and more! The Boiler Service Technician-Level 4 is a senior-level role responsible for expert service, maintenance, and upgrades of hot water and steam boiler systems in commercial and industrial settings. This position requires advanced troubleshooting skills, extensive experience with dual-fuel burner setups and combustion tuning, and a deep understanding of control and motor wiring. Candidates must be proficient in 3-element feedwater systems, parallel positioning controls, and analog circuit/transmitter diagnostics. Additionally, this role demands knowledge of 3-parameter trim systems, O2 trim installation, and hands-on experience with advanced control system upgrades. The ideal technician delivers top-tier performance, reliability, and service excellence to our customers. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction. • Lead expert-level service, maintenance, and upgrades of boiler systems in complex environments., • Demonstrates a strong knowledge of burner setup., • Demonstrates a strong knowledge of combustion management on dual fuel systems, • Demonstrates a strong knowledge of working on 3-element feedwater systems, parallel positioning controls., • Ability to diagnose and resolve issues with analog circuits and transmitters, • Knowledge of 3-parameter trim systems and O2 trim controls., • Execute advanced control system upgrades and retrofits., • Provide coaching & guidance to other technicians on boiler repairs., • Performs preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspect vehicles by checking vehicle condition and literature supplies., • Maintains vehicles by keeping records of service manuals, scheduling, and completing repairs and maintenance service., • Maintains tools and equipment by inspecting for signs of wear., • Documents work by completing paperwork on each job and maintaining files., • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need., • Keeps current all manufacturers' products concerning installation, operation, maintenance, service, and repair., • Provides technical support to customers., • Be knowledgeable with the products and services offered by Brady and become effective in the sales of those products and services., • Flexibility to work overtime/weekends, as required. TEAMWORK: • Demonstrate and promote a spirit of cooperation and teamwork throughout the Company, • Continually look for ways to improve our processes and ability to serve our customers effectively, • Improve personal performance on a continual basis CUSTOMER SERVICE: • Provide responsive, professional and diplomatic customer service, • Answer customer calls and correspondence quickly and pleasantly, • Communicate with customers in a friendly, professional, and patient manner, • Perform all duties with the goal of building and maintaining long-term customer relationships, • Immediately address any customer's concern and requests the involvement of other Company personnel as required SAFETY: • Follow all company safety programs and report any non-compliance to your Team Leader, • Notify Team Leader or Safety Manager of any unsafe conditions, • Proper PPE equipment must be used at all times when necessary, • Report all accidents and injuries to your Team Leader and HR immediately, • All monthly training topics on safety completed and done during the month due QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: Associate degree or equivalent from a two-year college or technical school in Heating, Ventilation, and Air Conditioning; 8-10 years of related experience in the field. COMPUTER SKILLS: Microsoft Word, Microsoft Outlook CERTIFICATES, LICENSES, REGISTRATIONS: Valid driver's license, Universal EPA certification LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The physical demands of the position include occasional sitting; frequent stooping, crouching, kneeling, balancing, and climbing; and constant standing, walking, reaching, and gripping. Material handling demands include lifting from floor level to overhead, with occasional lifting up to 115 lbs., frequent lifting up to 50 lbs., and constant lifting up to 25 lbs., placing the position in the Very Heavy Physical Demand Classification (PDC). Must be able to talk and hear. Vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Ability to wear standard necessary Personal Protective Equipment that is required by statute or risk assessment, for protecting worker safety. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position requires working outdoors, in mechanical/equipment rooms and possible extreme weather conditions. While performing the duties of this job, the associate is regularly exposed to moving mechanical parts and heavy equipment. The associate is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; risk of electrical shock (high voltage); and vibration. The associate is occasionally exposed to toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the work environment is usually loud. EEO STATEMENT: Brady strives to provide an environment free of discrimination as part of our mission to care for each other, our customers, and our community. We provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. OTHER REQUIREMENTS: • Ability to pass drug screening, • Ability to prove US employment eligibility

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Opportunity for advancement, • Training & development Who We Are: We are SERVPRO of Richland County. We are part of a team that is a national leader in property disaster restoration. From initial clean-up to complete rebuilds, SERVPRO is there every step of the way. We have a long-standing reputation as a leader in our industry. The Role: Practicing excellent customer service skills, you will be first on the scene to help people and businesses cope with fire and water disasters. Depending on your experience, you could be responsible for securing damaged property, demolishing or drying and cleaning floors and walls, building containment areas for dust or bio-hazards, cleaning and salvaging contents, all the way through rebuilding. SERVPRO of Richland County offers all the services of restoring a property back to its original condition. The Details: • Perform mitigation services for customers who have suffered property losses due to fire, water, mold, or biohazards., • Ensure clear communications with Crew Chief and Production Manager following directions and keeping everyone informed., • Identify safety hazards and follow control measures to ensure the safety of occupants and other workers., • Set up staging areas and equipment for each project ensuring a clean, safe, and organized work environment., • Maintain a clean and organized vehicle and equipment., • Perform end-of-day and end-of-job breakdown and cleanup to leave job site with an orderly appearance that impresses customers and keeps them confident in our work., • Protect and use equipment and materials properly.What You Must Have:, • An absolutely strong work ethic, high energy, and the drive to go the extra mile to achieve excellence., • That positive team attitude! We work hard and we have fun doing it., • The desire to learn and develop your knowledge and skills. If you want it, we have tremendous opportunities., • Experience in demolition, construction, industrial cleaning, or restoration., • Experience in infection control cleaning is helpful., • Ability to work nights and weekends in a generous bonus-paid on-call rotation., • Valid Drivers License with a clean driving record., • Dependable transportation., • Effective verbal communication., • Ability to pass a criminal background check with no felony convictions.Physical Requirements:, • Must be able to routinely lift a minimum of 50 pounds and up to 100 pounds with assistance., • Ability to access and work in tight spaces (i.e. crawl spaces, attics), • Ability to don and doff personal protective equipment to minimize potential exposure to chemicals and biohazards.The Rewards: As a valued SERVPRO employee, you will receive competitive pay, medical, vision, and dental benefits, and a 401(k) account with a generous company match. All of this with the continuing opportunity to learn valuable new skills and earn more.

Job DescriptionLane Valente Industries offers a broad range of solutions that help multi-site organizations reduce costs through energy reduction, facility maintenance and value engineering. Our solutions have uncovered significant savings for our customers when reducing both energy and maintenance costs. We exploit new technology and embrace client feedback to constantly improve our entire product range. With a thirty-year track record, we attribute our success to our solid commitment to client satisfaction, attention to detail, dependable service, and a pride in our quality of work. We have operations in a variety of locations across the United States. We are looking for talented people who value integrity, the value of an honest day's work, and shared success. If you believe you are one of those talented people, and are interested in being considered for a career at Lane Valente Industries, we invite you to apply today! HVAC Manager/Service Tech for company that handles service work and site maintenance for national accounts. Job Responsibilities & Requirements • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Able to Quote jobs., • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Review product sales metrics and work with on developing appropriate product selling plans and programs, • Effectively perform needs assessments, develops sales proposals, estimates, specifications and presentations BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations, • 401(k) retirement plan with generous company match Powered by JazzHR yFxHtrJdxv

Job Description Job Title: Resource Development Director Position Classification: Exempt salary; benefits included; Salary: $85,000 Reports To: Chief Executive Officer JOB SUMMARY: Under the supervision of the CEO the Resource Development Director (RDD) provides professional expertise and support to Clubs who are a part of the Boys & Girls Clubs of the Crescent Region (BGCCR). The RDD works with member parties to develop resource development goals and plans to meet the Clubs financial goals and objectives. The RDD is accountable for developing and implementing strategies and leading the fund development team to achieve the goals in keeping with established ethical standards, policies, and guidelines. The Resource Development Director is responsible for managing the BGCCR's member Clubs by helping them to develop and implement an annual Resource Development plan, coordinate fundraising campaigns, and identifying potential sources of funds (including individuals, foundations, corporations, government, annual giving, capital campaign, planned giving, special events and United Way and other agency supports). ESSENTIAL JOB FUNCTIONS AND ACCOUNTABILITIES: 1. Ensures that the community support goals for all supported communities are met., 2. Provides professional expertise and direction in all aspects of fundraising/development to the fund development staff and staff support., 3. Works in partnership with the CEO and the senior leadership team to shape the BGCCR's community support strategies. Plays a key management and administrative role in the execution of the annual plan of work. Provides support to resource development committees of the BGCCR and supported communities., 4. Represents the BGCCR and the CEO, as needed, to both internal and external audiences., 5. Establishes and implements fund development policies, procedures, plans, and goals., 6. Develops and manages the budget for fund development. Leads efforts to ensure that best practices are utilized and that resources are leveraged and deployed in the most effective way to accomplish the Boys & Girls Clubs fund development goals., 7. Works closely with the public relations/communications area to develop marketing strategies to promote the Boys& Girls Club image for donor cultivation., 8. Work with member Clubs to aggressively seek new funding sources and maintain relationships with current and past donors., 9. Establishes and strengthens presence in the community to increase the Boys & Girls Clubs visibility as a funding source for potential and current or past donors., 10. Responsible for the grant-writing and reporting process., 11. Plans, manages, and implements fundraising events., 12. Ensures that the donor database of the BGCCR is up-to-date and well managed., 13. Collaborates with Clubs and BGCA staff to identify untapped markets of interest and to generate ideas, programs, and concepts to engage potential donors., 14. Manages the effective development and retention of high-performing fund development staff and ensures they are equipped to help the Clubs meet their fund development goals., 15. Ensures that diversity and pluralism are embraced and incorporated into the work of the council. GENERAL ACCOUNTABILITIES 1. Actively supports and promotes the Boys & Girls Clubs commitment to diversity., 2. Actively supports all efforts to increase cooperation, communication, and collaboration between and among member Clubs, staff members, and volunteers., 3. Understands and internalizes the importance of seeking resolution to problems and concerns by bringing them to the direct attention of supervisor in a timely manner., 4. Seeks to improve the effectiveness and efficiency of all BGCP operations with positive and creative approaches to challenges., 5. Ensures that materials prepared and produced for Boys & Girls Clubs of the Crescent Region internal and external audiences reflect the highest standards of excellence., 6. Demonstrates sound time-management skills by effectively and efficiently organizing, prioritizing, and completing multiple assignments in a timely manner., 7. Maintains strict confidentiality when handling sensitive information., 8. Attends and facilitates administrative, member Clubs, department, and team meetings as needed., 9. Continually seeks and accepts opportunities for personal and professional growth., 10. Other duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Demonstrated success in development and implementation of comprehensive fund development plans and experience in marketing, public relations, sales, or related fields. · Knowledge of effective marketing strategies in non-profit environment. · In-depth understanding of fund development processes and structures and desire to translate those into high-performing systems, processes, and structures. · Ability to prioritize tasks and work under changing priorities and deadlines. · Excellent analytical, organizational, and written and oral communication skills. · Ability to effectively identify, analyze, and successfully handle conflict resolution at all levels with a variety of people. Excellent problem solving skills. · Previous supervisory experience and knowledge of the cycle of employee development and accountability. · Interest in and appreciation of team approach to management; knowledge of team-building value and options. Experience motivating and supervising volunteer staff. · Willingness and ability to travel as needed. • Valid state-issued driver's license, valid auto insurance, acceptable driving record and access to a vehicle on a daily basis., • Acceptable criminal background history. · Willingness to work varied hours, including some nights and weekends. · Willingness to become a member of one or more civic organizations. · Proficiency in MS Office Software. EDUCATION and/or EXPERIENCE: · Bachelor's Degree in related field required or an equivalent combination of education and professional experience. Certified Fund Raising Executive (CFRE) preferred. Proven track record in receiving and managing multiple grants, and annual giving campaigns. PHYSICAL and MENTAL REQUIREMENTS: Must be detail-oriented, have good analytical abilities, high energy level and be comfortable performing multi-faceted projects in conjunction with day-to-day activities. Ability to get along with diverse personalities, while displaying tact, maturity and flexibility.

Job Description Salary Range: $30,139.20 ($14.49/hr) Once hired on full state benefits will be allowed. General Statement of Job Under regular supervision, performs a variety of basic custodial and groundskeeping tasks in order to provide a clean and safe environment for students and school personnel. Reports to the Building Custodial Coordinator or Night Custodial Crew Leader. Specific Duties and Responsibilities Essential Functions: • Conducts a variety of basic custodial, maintenance and groundskeeping functions, following established regulations and standards for cleanliness and safety. Duties may include cleaning restrooms, hallways, classrooms, offices, cafeteria and other areas of the school building; removing trash; sanitizing and disinfecting surfaces; sweeping, vacuuming, mopping, shampooing and buffing floors and carpets; cleaning windows and walls; moving furniture; dusting; restocking soap and paper towel dispensers; removing trash from grounds; and miscellaneous landscaping duties as required., • Sets up rooms, tables and chairs for special events., • Operates a variety of equipment which may include a floor buffer, burnisher, auto scrubber, carpet cleaner, vacuum, sweeper, wet vac, hand and power tools, cleaning equipment and tools, lawn mower, weed eater, hedge trimmer, and leaf blower., • Must attend training and professional development classes as required., • May be required to perform custodial duties at other sites if needed., • Must be able to fill-in as required during staff absences on all shifts., • Exercises care and safety in the use of equipment and tools required to complete assigned tasks., • Interacts and communicates with various groups and individuals, such as the immediate supervisor, co-workers, school staff, and students. • Complies with all federal laws, state statutes, Board policies, administrative rules, and directives. Additional Duties: • Unlocks /secures building and rooms; may be required to respond to emergency calls or secure building., • Conducts light maintenance duties, including changing light fixtures, moving furniture, and conducting minor repairs to equipment., • Performs related duties as required. Minimum Education and Training Requires a minimum of six months experience in a cleaning or industrial environment. Minimum Qualifications and Standards Required Physical Requirements: Must be physically able to operate a variety of machines and equipment, including a telephone, cleaning equipment, etc. Must be able to exert up to twenty pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects. Physical demands are in excess of those for sedentary work; must be able to remain on feet for periods of time, stoop, kneel, crouch, push, pull, climb, balance and perform manual tasks. Must be able to lift and/or carry weights of up to 100 pounds. Data Conception: Requires the ability to compare and/or judge the readily observable functional, structural or compositional characteristics (whether similar to or divergent from obvious standards) of data, people or things. Interpersonal Communications: Requires the ability of speaking and/or signaling people to convey or exchange information. Includes receiving assignments and/or direction from supervisor. Language Ability: Requires the ability to read and understand a variety of policy and procedures manuals, maintenance manuals, etc. Requires the ability to speak with and before others with clarity, voice control and confidence. Intelligence: Requires the ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions, to deal with problems involving a few concrete variables in or from standardized situations. Requires the ability to learn and understand principles and techniques, to make routine independent judgments in absence of supervision, and to acquire knowledge of topics related to primary occupation. Must have the ability to comprehend and interpret received information. Verbal Aptitude: Requires the ability to record and deliver information and to follow verbal and written instructions. Must be able to communicate effectively and efficiently with persons of varying educational backgrounds. Numerical Aptitude: Requires the ability to add and subtract totals, to multiply and divide, and to determine time. Form/Spatial Aptitude: Requires the ability to inspect items for proper length, width and shape, and visually read various information. Motor Coordination: Requires the ability to coordinate hands and eyes using specialized machinery. Manual Dexterity: Requires the ability to handle a variety of items, control knobs, buttons, switches, catches, etc. Must have moderate levels of eye/hand/foot coordination. Color Discrimination: Does not require the ability to differentiate colors and shades of color. Interpersonal Temperament: Requires the ability to deal with people beyond giving and receiving instructions. Must be adaptable to performing under stress when confronted with emergency situations or tight deadlines. The worker may be subject to danger or risk to a slight degree. Physical Communications: Requires the ability to talk and/or hear (talking: expressing or exchanging ideas by means of spoken words; hearing: perceiving nature of sounds by ear). Performance Evaluation Criteria Job Knowledge: Has thorough knowledge of department methods, procedures and policies as they pertain to the performance of duties of the Custodian. Is knowledgeable in the laws, ordinances, standards and regulations pertaining to the specific duties and responsibilities of the position. Has knowledge of custodial/maintenance methods and practices and related safety regulations and protocol. Has the ability to offer assistance to co-workers and employees of other departments as required. Has the ability to use independent judgment as needed in performing routine tasks. Is able to take the initiative to complete the duties of the position without the need of direct supervision. Is able to read and interpret policy manuals and related materials pertaining to the responsibilities of the job. Has knowledge of the terminology used within the department. Knows how to maintain effective relationships with co-workers, supervisors and students through contact and cooperation. Knows how to react calmly and quickly in emergency situations. Has the mathematical ability to handle required calculations. Has the ability to learn and utilize new skills and information to improve job performance and efficiency. Has knowledge of the standard tools, materials and practices of the trade. Has skills in the care and use of required tools and equipment. Has knowledge of the occupational hazards and safety precautions of the trade. Is able to make minor repairs and adjustments to equipment. Quality of Work: Maintains high standards of accuracy in exercising duties and responsibilities. Exercises immediate remedial action to correct any quality deficiencies that occur in areas of responsibility. Maintains high quality communication and interaction with all District departments and divisions, co-workers and the public. Quantity of Work: Performs described "Specific Duties and Responsibilities" and related assignments efficiently and effectively in order to produce quantity of work which consistently meets standards and expectations of the District. Dependability: Assumes responsibility for completing assigned work. Completes assigned work within deadlines in accordance with directives, District policy, standards and prescribed procedures. Remains accountable to assigned responsibilities in the technical, human and conceptual areas. Attends and remains at work regularly and adheres to District policies and procedures regarding absences and tardiness. Provides adequate notice to higher management with respect to vacation time and time-off requests. Initiative and Enthusiasm: Maintains an enthusiastic, self-reliant and self-starting approach to meet job responsibilities and accountability. Strives to anticipate work to be done, and initiates proper and acceptable direction for the completion of work with a minimum of supervision and instruction. Judgment: Exercises analytical judgment in areas of responsibility. Identifies problems or situations as they occur, and specifies decision objectives. Identifies or assists in identifying alternative solutions to problems or situations. Implements decisions in accordance with prescribed and effective policies and procedures and with a minimum of errors. Seeks expert or experienced advice where appropriate and researches problems, situations and alternatives before exercising judgment. Cooperation: Accepts supervisory instruction and direction, and strives to meet the goals and objectives of same. Questions such instruction and direction when clarification of results or consequences are justified (i.e., poor communications, variance with District policy or procedures, etc.). Offers suggestions and recommendations to encourage and improve cooperation between all staff persons and departments within the District. Relationships: Shares knowledge with managers, supervisors and staff for mutual and district benefit. Contributes to maintaining high morale among all District employees. Develops and maintains cooperative and courteous relationships with department employees, staff and managers in other departments, representatives from organizations, and the public so as to maintain good will toward the District and to project a good district image. Tactfully and effectively handles requests, suggestions and complaints from other departments and persons in order to maintain good will within the District. Emphasizes the importance of maintaining a positive image within the District. Interacts effectively with higher management, professionals and the public. Coordination of Work: Plans and organizes daily work routine. Establishes priorities for the completion of work in accordance with sound time-management methodology. Avoids duplication of effort. Estimates expected time of completion of elements of work and establishes a personal schedule accordingly. Attends required meetings, planning sessions and discussions on time. Implements work activity in accordance with priorities and estimated schedules. Safety: Adheres to all safety and housekeeping standards established by the District and various regulatory agencies. Sees that standards are not violated. Maintains a clean and orderly workplace Company DescriptionWhy Join Us: We are an established well performing branch in Columbia, and are looking for highly motivated individuals to join our team and make a meaningful contribution. The Columbia branch offers the best of both worlds: the flexibility and endless upside opportunity for growth of a new branch, combined with the experience, know-how, and resources of a leading organization! We believe people are a company's number one asset, and in addition to a competitive base salary, we offer the opportunity for additional earning potential through annual performance bonuses. But more importantly, we offer an excellent work environment, characterized by service excellence, a high sense of camaraderie and genuine recognition for hard work and performance.Why Join Us:\r\nWe are an established well performing branch in Columbia, and are looking for highly motivated individuals to join our team and make a meaningful contribution. The Columbia branch offers the best of both worlds: the flexibility and endless upside opportunity for growth of a new branch, combined with the experience, know-how, and resources of a leading organization!\r\nWe believe people are a company's number one asset, and in addition to a competitive base salary, we offer the opportunity for additional earning potential through annual performance bonuses. But more importantly, we offer an excellent work environment, characterized by service excellence, a high sense of camaraderie and genuine recognition for hard work and performance.

Job Description Do you have a positive attitude? Are you a people-person? Do you enjoy sales? This Inside Sales Rep (ISR) opportunity is for you! You will have the chance to become the face of the store and the person customers rely on when they stop in. Friendly customer service is key. Our customers can buy a 2x4 anywhere – they come to us because of the customer service. Our Story Carter Lumber was founded in 1932 by W.E. Carter. For 90 years, we have strengthened our company by staying true to our values, which include honesty, hard work, and putting people first. What started as a single lumberyard in Akron, Ohio, is represented today by seven brands servicing professional builders and homeowners across thirteen states with more than 160 locations. Despite our growth, we are still a family-owned company. Our core values and our people-first culture remain the same. Description When a customer walks in the store, you will be there to assist them. You will share product information, give advice on their project needs, produce estimates for packages/projects and process transactions. You will also follow up on online customer quotes, cold call to qualify new leads, support the Outside Sales Reps as needed, and assist in inventory control by conducting cycle counts and resolving overages/shortages. Each ISR completes training to learn our products, our POS System, and how to fill out paperwork. Salary + commission! Our commission is structured so that there is no limit to your compensation. Requirements • Experience working in sales or customer service, • Friendly, outgoing personality, • Effective communication skills, • Familiarity with building materials is helpful, but not required, • Ability to be a team player, • Ability to ensure sales and profit goals are met Benefits (full-time employees), • Health, Dental, Vision (Single and Family Plans) available after 30 days of employment, • Short and Long-Term Disability, • Company-paid life insurance and AD&D, • Optional supplemental life insurance, • Company-match 401(k), • Vacation time and paid holidays, • Vendor incentives, • Room for growth; we promote from within!, • Military encouraged to apply!IND123 Powered by JazzHR PRZQGh22AR

Job Description Competitive Compensation – Impressive Benefits – Potential for Growth – Work/Life Balance Now hiring in Columbia, Lexington, Blythewood, Camden, Pelion, Batesburg-Leesville, Chapin, Newberry and Eastover areas! Are you ready for an exciting career that makes a real difference in your community? Clark's Pest is looking for motivated individuals to join our pest control team as Technicians. No prior experience is necessary - we provide full training! Who We Are: Clark's Pest is much more than a pest control company. We are a team of professionals committed to providing quality pest control solutions and safe treatment options, and we want you! At Clark's, we have the backing of an international company, but we operate like a small business and care about our employees. What You'll Do: As a Pest Control Technician at Clark's Pest, you'll play a crucial role in maintaining the health and safety of our client's properties by effectively managing pest infestations. We're seeking those who prioritize customers, embrace learning opportunities, and are at ease with outdoor work. A day in the life of a Pest Control Technician: Your day is filled with helping our customers live pest-free. You will conduct inspections of residential properties to identify pest infestations, entry points, and conducive conditions. Next, you'll create pest management plans that fit each client's needs, ensuring effective treatment and prevention strategies. You'll dig into your pest control toolkit of chemical treatments, traps, and exclusion techniques to solve pest problems. Customer satisfaction is important so you will educate clients on pest-prevention practices and provide recommendations for a pest-free environment. Documenting your service activities and keeping detailed records of treatment plans, materials used, and client interactions is a job requirement. What You Need: • High school diploma OR GED AND at least 3 years of driving experience, must be at least 21 years of age, AND a valid driver's license, • Previous experience in pest control, construction, plumbing, or HVAC fields is highly desirable., • Experienced using computers and smartphones., • Good communication and customer service skills., • Willingness to obtain necessary pest control certifications and licenses (if not already held). Physical Requirements: You must be able to lift up to 25 pounds at a time comfortably, work in extreme temperatures (hot and cold), safely operate equipment, and go into large and small crawlspaces. What We Offer: Our company offers a great compensation package: competitive pay, paid training, ongoing professional development, retirement savings plan, paid time off, holiday pay, company vehicle, company phone, and a full benefits package (medical, dental, vision, and a FREE life insurance policy). Join our team at Clark's and spend your day helping other people in your community by solving their pest challenges, building long-term relationships with those you help, and protecting their homes and businesses. Apply now to become a valuable member of our dedicated team! Ready to Get Started? To apply, please submit your resume with your relevant experience. We look forward to hearing from you! EOE Job Posted by ApplicantPro

Job Description About Piedmont Door Solutions Since 2001, Piedmont Door Solutions has been the #1 choice for commercial door and entrance solutions across the Southeast, Southwest, and Mid-Atlantic. With 10 locations, we specialize in the design, installation, maintenance, and repair of automatic doors, manual doors, and security solutions for commercial, industrial, and institutional customers - from hospitals and schools to property management and general contractors. We understand that an entrance is more than a doorway. It's the first and last impression of a facility, which is why we hold ourselves to an unmatched standard of service, attention to detail, and customized solutions for every customer we serve. The Role Piedmont Door Solutions is looking for a Business Development Representative to grow the South Carolina market. This is a field-based, business development role with emphasis on prospecting and building commercial relationships across the territory with the full support of the Columbia, SC operations teams. You'd be joining at an exciting inflection point for the business: 6 consecutive record-breaking quarters, a growing national sales team, and a Florida market that's poised for growth. If you thrive in a hunter environment and want real ownership over growth strategy in a developing market, this is worth a conversation In this role you will… • Own the full sales cycle across the South Carolina territory from cold outreach and prospecting to proposal delivery and close, • Build and grow a pipeline of net-new commercial accounts across key verticals including healthcare, property management, general contractors, and glazers, • Develop lasting relationships with facilities managers, GCs, architects, and property owners as their trusted pedestrian access solutions partner, • Collaborate closely with branch operations and service teams to ensure seamless project delivery and a customer experience that earns repeat business, • Maintain accurate pipeline records and participate in regular sales reviews with branch leadership You've got what it takes if you have… • 5–7 years of outside sales or business development experience in commercial B2B identifying and closing on new opportunities, • Background in commercial doors, access control, glazing/Division 8, building materials, HVAC, or adjacent construction/facilities sectors, • The ability to work independently in a field-based role and manage a large territory without being managed, • Strong communication skills and the confidence to engage decision-makers at any level, • Valid driver's license with a clean record, • Bachelor's degree preferred; equivalent experience considered COMPENSATION AND BENEFITS • Performance based incentives and sales commissions, • Medical, dental, and vision, • Paid time off and holidays, • Vehicle allowance

Job Description Now is the best time to join Johnstone Supply. The Account Manager - Specialty is responsible for selling the Johnstone Advantage, a combination of our services and products, within a specified region or major geographical area, with special focus on the governmental or other specialty customer. Our customers are professional certified Technicians and Contractors who come to Johnstone for our product selection, expertise, and quality service. Johnstone is growing, and so can you. *Minimum of three (3) years of sales experience working with government, institutional, hospitality, or specialty customer segments required.* Position responsibilities: • In collaboration with Regional Managers and Director of Sales, develop and implement a sales plan that identifies and accomplishes a profitable base within the assigned territory., • Manage assigned accounts, by executing sales strategy, initiate contact with existing and potential customers, identify their needs and sell HVAC/R service and products that meet their needs. The above includes:, • Keeping customer information updated, • Managing individual contract and SKU pricing, • Preparing for sales calls specific to the needs of individual customers, • Tracking customer activity and trends, • Creating goals and forecasts per account, • Aligning customer needs with services available through the Ware Group’s Johnstone Advantage (e.g., inventory, customer service, warranty, ecommerce, delivery, etc.), • In conjunction with Sales and Marketing teams, determine market strategies and goals for products and services, targeted toward existing and new markets to achieve company’s goals and objectives., • Manage assigned accounts in assigned territory; regularly communicate information regarding promotions, warranty, price books, new product launches, product changes, etc. to Dealer base. Keep customer information updated, review pricing, track customer activity., • Develop and deliver sales presentations that: 1) effectively communicate the benefits of the Company and 2) assist the Customer with meeting their business goals. Hold business review meetings with decision-makers aimed at identifying continued partnership and growth opportunities. Includes closing sales in a professional and effective manner by meeting established sales and revenue goals., • Develop and build relationships with local Account Managers, Market Managers and Branch personnel in order to provide a collaborative approach that addresses the specialty customers’ needs and lands the business with the Ware Group. (Due to the size of the territory, local support may be necessary to quickly respond in the absence of the Account Manager’s availability. Furthermore, instances may exist when a specialty customer purchases other parts, supplies or commodities from local Ware Group Account Managers.), • Identify and follow up with prospect accounts that will further support ongoing growth targets for the specialty area., • Monitor sales activity to ensure success in meeting sales goals; identify threats and opportunity and adjust activities accordingly., • Through internal/external training, maintain up-to-date understanding of industry trends and technical developments that effect target markets. Identify technical training opportunity with customers., • Review blueprints, plans, and other customer documents to develop and prepare cost estimates or projected proposed equipment or services., • Monitor competitor products, sales, and marketing activities., • Establish and maintain relationships with industry influencers and key strategic partners., • Participate in Marketing and Sales meetings, providing customer and product data, strategies, and opportunities. Champion key company sales resources and initiatives., • Develop and maintain communications in a cooperative and professional manner with all levels of staff and customers. This includes:, • Utilization of CRM, • Communicating inventory needs / changes to product managers and purchasing, • Participation in marketing and sales conference calls., • Periodic participation in various task force programs, as needed., • Establishes and maintains a consistent company image throughout all product lines, promotional materials and events., • Represent company at trade association meetings to promote product and services., • Establishes and maintains a consistent company image throughout all product lines, promotional materials and events. Work with category, product managers and vendors on field issues that includes: new products, high failure rates, large bid opportunities and competitive pricing. Provides expertise and support to Account Managers as needed related to specialty customers., • Performs all other duties as assigned. Position requirements: • B.A. preferred or equivalent; or high school degree or equivalent required., • Experienced sales professional with consultative selling skills and proven ability to close the sale; minimum 8 years sales experience and/or training, • Ability to generate new business and maintain established business through creating and carrying out a sales plan., • Minimum three years’ experience selling to government and/or institutional, hospitality or other specialty customers required., • HVAC/R Industry, or related wholesale industrial product experience preferred., • Business travel (automobile) of up to 80% of time within the assigned territory., • Must possess excellent communication and interpersonal skills with ability to communicate proficiently in English in both verbal and written forms, • Thorough understanding and implementation experience with value-oriented sales processes., • Ability to define problems, collect data, establish facts and draw valid conclusions., • Must have demonstrated ability to coordinate a high level of activity under a variety of conditions and constraints., • Must have the ability to make business decisions by an analytical as well as creative process., • Ability to coach and mentor other sales personnel., • Proficient in Word, Excel and PowerPoint with success utilizing sales tools and information technology resources; experience utilizing customer management software preferred. Johnstone Supply is strongly interested in hiring a great candidate that exhibits work behaviors & values that are conducive to building and maintaining a strong and effective company culture. These behaviors include: • Safety: Always prioritizes safety, both at work and at home, while ensuring those who work for you work safely., • Customer Focused: Take the perspective of those we serve, anticipate their needs, and responding quickly., • One Team: We win together by collaborating with each other, focusing on the common goal, and leveraging the strengths of the team., • Own It: Take the initiative, act with a sense of urgency and pride, do things right the first time, and always act with integrity., • Innovate: Embrace and create change that drives continuous improvement and customer-valued solutions. At Johnstone Supply, we recognize that our employees’ growth, well-being, and success drives the company’s success. We offer a competitive wage, in addition to health and wellness benefits including customizable plans for medical, dental, vision coverage, and options for alternative care. We provide the resources you need to take charge of your well-being, including: • Paid Time Off (PTO) – 3 weeks of PTO for individual contributors and 4 weeks for leaders, • Safe Harbor 401(k) – 100% employer match up to 5% of base pay and immediately vests, • Holiday pay – we recognize and pay our employees for 7.5 holidays per year, • Employer subsidized medical, dental, and vision plans., • Employer paid life insurance and long-term disability, • Voluntary short-term disability, accident and critical illness insurance, • 24/7 Access to virtual care/telehealth options, and Parental Time Off, • Flexible spending accounts (FSA), • $100 wellness reward for completing annual health check-up, • Employee Assistance Program (EAP) for you, and your family, • Coverage for chiropractic, acupuncture, and massage therapy services, • Tuition reimbursement, up to $5,250 per year, • Employee referral bonus program – earn up to $4,000 per year, • Employee service milestone recognition program, • Employee discounts on products & retail discounts, • Variety of incentive plans for employees, • Bi-weekly pay days on every other Friday, • Opportunity to apply for the John M Shank Memorial Scholarship Fund, available to both Johnstone employees and children of employees We understand that our employees are the cornerstone of our success. Our commitment to continuous improvement & investment in our people is only matched by our commitment to superior customer experience. Johnstone Supply is North America’s leading wholesale distributor of HVACR equipment, parts, and supplies. Over the last seven decades Johnstone has grown into the industry leader with over 450 distributor branches and 6 distribution centers throughout North America resulting in over $4 billion in annual sales. We work with some of the largest companies in the world, including Daikin/Goodman, Honeywell, Emerson, Johnson Controls, Google, and Fujitsu, to provide contractors with world class products, technical expertise, and quality service. EOE & E-Verify Participating Employer.

Job Description The Nuclear Company is the fastest growing startup in the nuclear and energy space creating a never before seen fleet-scale approach to building nuclear reactors. Through its design-once, build-many approach and coalition building across communities, regulators, and financial stakeholders, The Nuclear Company is committed to delivering safe and reliable electricity at the lowest cost, while catalyzing the nuclear industry toward rapid development in America and globally. About the role This position is ideal for a highly analytical finance professional who thrives at the intersection of infrastructure, energy, and capital markets. The Senior Associate will collaborate closely with cross-functional teams across the organization (commercial, technical and legal) to facilitate origination, structure contracts, optimize project economics, and execute complicated and multi-party capital financing transactions to support TNC's execution. Responsibilities • Financial Modeling & Analysis, • Build and maintain detailed project-level and portfolio financial models incorporating capital costs, operating assumptions, and financing terms., • Perform scenario and sensitivity analyses to evaluate key drivers of project economics and risk-return profiles., • Support valuation of structured financing transactions including sponsor equity, tax equity, project debt, and public-private partnerships., • Transaction Support, • Support the execution of complex project finance transactions, including due diligence, documentation review, and coordination with internal and external stakeholders., • Prepare investment materials, term sheets, and presentation decks for internal leadership, lenders, and investors., • Conduct market and comparable analysis to benchmark financing terms and support negotiation strategy., • Strategic Collaboration, • Partner with cross-functional teams (Legal, Development, Engineering, and Government Affairs) to align financing structures with technical, regulatory, and policy objectives., • Closely coordinate with FP&A to assess impact of project-level economics in TNC's corporate financial plan., • Support the development of project pipelines and capital deployment strategies aligned with company growth plans., • Interface with potential lenders, investors, and advisors to build strong external relationships and represent the company in financing discussions., • Process & Systems Development, • Contribute to building internal project finance processes, tools, and templates to support repeatable, scalable deal execution., • Help establish key performance metrics and reporting standards for project-level and portfolio-wide financial performance. Required Experience Mission-driven, with a passion for accelerating clean energy and infrastructure development. • Education & Experience, • Bachelor's degree in Finance, Economics, Business, Engineering, or related field; MBA or advanced degree preferred., • 5+ years of experience in project finance, investment banking, private equity, or corporate finance — ideally within energy, infrastructure, or industrial sectors., • Skills & Competencies, • Exceptional analytical and quantitative skills, with advanced proficiency in Excel and financial modeling of levered non-recourse projects., • Excellent communication and presentation skills, with the ability to convey complicated concepts to both technical and non-technical audiences., • Highly organized, detail-oriented, and comfortable managing multiple priorities in a fast-paced startup environment. Preferred Qualifications • Experience with modeling tax equity partnership economics (including full capital account build-ups), • Familiarity with government-backed financing mechanisms, tax incentives, or DOE/loan guarantee programs is a plus. Benefits • Competitive compensation packages, • 401k with company match, • Medical, dental, vision plans, • Generous vacation policy, plus holidays Estimated Starting Salary Range The estimated starting salary range for this role is $118,000 - $140,000 annually less applicable withholdings and deductions, paid on a bi-weekly basis. The actual salary offered may vary based on relevant factors as determined in the Company's discretion, which may include experience, qualifications, tenure, skill set, availability of qualified candidates, geographic location, certifications held, and other criteria deemed pertinent to the particular role. EEO Statement The Nuclear Company is an equal opportunity employer committed to fostering an environment of inclusion in the workplace. We provide equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. We prohibit discrimination in all aspects of employment, including hiring, promotion, demotion, transfer, compensation, and termination. Export Control Certain positions at The Nuclear Company may involve access to information and technology subject to export controls under U.S. law. Compliance with these export controls may result in The Nuclear Company limiting its consideration of certain applicants.Recruiting Fraud Alert Your safety is our priority. We want to ensure your job search stays secure. Please note that the team at The Nuclear Company only communicates through official @thenuclearcompany.com email addresses. We will never ask for payments or sensitive financial information at any stage of our recruitment process. For your peace of mind, please verify all openings and submit your applications directly through our official careers page: Careers

Job Description Commercial Plumbing Superintendent Walker White Mechanical – Columbia, SC Full‑time | Competitive Pay | Leadership Role Walker White Mechanical, a respected leader in commercial mechanical construction across the Midlands, is seeking an experienced Commercial Plumbing Superintendent to oversee field operations and drive project success. This is a key leadership role responsible for ensuring high‑quality installations, efficient workflow, and strong coordination across multiple commercial projects. Position Overview The Commercial Plumbing Superintendent provides on-site leadership, oversees multiple crews, and ensures all plumbing installations meet project specifications, building codes, and company standards. The ideal candidate is a strong communicator who thrives in a fast-paced, construction-focused environment. Key Responsibilities • Oversee day‑to‑day field operations for multiple commercial plumbing projects, • Coordinate schedules, manpower, subcontractors, and materials, • Ensure all installations meet code requirements, plans, and specifications, • Conduct jobsite inspections, quality checks, and safety audits, • Work closely with project managers, general contractors, and foremen, • Troubleshoot installation challenges and provide technical guidance, • Forecast manpower needs and assist in planning project timelines, • Maintain accurate project documentation and daily field reports, • Lead, mentor, and support plumbing foremen and field teams Qualifications • 8+ years of commercial plumbing experience, • 3+ years supervising or leading crews (Superintendent experience preferred), • Strong understanding of commercial plumbing systems, codes, and installation practices, • Ability to read and interpret blueprints, submittals, and construction documents, • Proven ability to manage multiple jobs simultaneously, • Excellent communication, leadership, and problem‑solving skills, • Valid driver’s license and reliable transportation, • Must be able to pass pre‑employment screening What We Offer • Competitive salary based on experience, • Health, dental, and vision insurance, • Company vehicle or vehicle allowance (optional based on company policy), • Paid time off and holidays, • Long‑term, stable work with an established company, • Opportunities for professional growth and advancement within the organization Work Schedule • Monday–Friday with additional hours as project needs demand, • Jobsite travel within the Midlands region How to Apply Apply directly through Indeed or submit your resume to the hiring team at Walker White Mechanical. We’re excited to add a strong leader to our growing team!

Job DescriptionDescription: PURPOSE OF THE POSITION The superintendent for the grading division directs all field personnel on a given project, takes responsibility for all safety and production goals for the project. RESPONSIBILITIES To guide all field activities on projects while adhering to all company policies and OSHA / MSHA regulations, while meeting all safety, quality and schedule goals. Main Activities • Build a team atmosphere to allow all foreman and operators to thrive and succeed., • Manage several foreman / lead men on separate projects and provide them with the tools, equipment and technical support they need, • Manage several projects in varying locations throughout the Southeast., • Attend meetings with the client, • Attend pre-con meetings, • Work with Project Engineer to ensure materials are submitted, approved and delivered on time, • Work with Project Engineer to ensure layout is correct and performed ahead of time, • Schedule equipment delivery, • Schedule meetings with engineers and owners, • Maintain all erosion control inspections and ensure compliance, • Communicate scope, details and schedule with the foremen, • Random on site safety inspections, • Management production requirements as set forth in the project schedules, • Assist in training new hires and existing personnel, • Assist in recruiting and screening new employees, • Assist in safety meetings, • Communicate project billing information to the office for timely invoicing, • Communicate project time sheets to the office for payroll, • Maintain a project file of fuel sheets, load count sheets, hourly work, change order requests, and all applicable materials lists, • Schedule and order necessary construction materials, • Maintain MSHA compliance on projects, • Check the on site MSHA binder for compliance, • Ensure foremen / lead men have all MSHA paperwork, organized and up to date, • Random inspections of vehicles, equipment and projects, • Attend all required MSHA training, • Maintain all expense reports credit card receipts, coded correctly and turned in weekly, • Maintain a professional appearance at all times, • Maintain company vehicle Sub Activities • Operate all heavy equipment in a safe and efficient way according to all relevant legislation, policies and procedures when needed., • Ensure heavy equipment is safely and securely stored, • Participate in routine maintenance when needed, • Practice workplace safety, • Maintain inventory, • Complete daily fuel, load count and hour logs, • General daily preventative equipment maintenance, • Maintain current tool inventory in maintenance trailer / truck, • Maintain fuel tank level and inventory, communicate to management for deliveries, • Install and maintain silt fence., • Maintain all erosion control devices and report deficiencies, • Guide and lead the crew in all daily activities, • Perform minor emergency repairs on equipment as needed KNOWLEDGE, SKILLS AND ABILITIES Knowledge The incumbent must have proficient knowledge in the following areas or be willing to learn: • Equipment operation and maintenance, • Equipment safety, • MSHA regulations, • OSHA regulations, • Site specific hazards and conditions, • General site preparation techniques and procedures, • Knowledge of operation of front end loaders, dozers, graders, compactors, and other pieces of heavy equipment, • Knowledge of equipment maintenance and storage, • Knowledge of road construction and maintenance techniques, • Knowledge of workplace safety requirements and procedures, • Knowledge of equipment cleaning standards and procedures Skills The incumbent must demonstrate the following skills: • ability to operate all types of equipment according to the manufacturers recommendations, • ability to operate required equipment in a safe and responsible manner, • client service and public interaction skills, • team building, • analytical and problem solving skills, • decision making skills, • effective verbal and listening communications skills, • ability to communicate effectively in English, • ability to read and write to record pickups and maintain daily records, • stress management skills, • time management skills Personal Attributes The incumbent must demonstrate the following personal attributes: • be honest and trustworthy be respectful, • able to communicate effectively, • possess cultural awareness and sensitivity, • be flexible, • demonstrate sound work ethics, • deal with the public in a positive, courteous and respectful manner WORKING CONDITIONS Physical Demands The superintendent position is a physically strenuous and mentally demanding job. He/she will be lifting, pulling and managing heavy equipment and objects, from time to time. The project manager will have to work in all weather, and must be prepared for both extreme heat and cold. The person must ensure that all activities are completed in a safe and efficient way. Environmental Conditions The superintendent must work outside in all different weather conditions including extreme cold and extreme heat. He/she may at times be exposed to dangerous and/or toxic substances and must take necessary precautions to protect eyes, nose and skin from irritation and infection. Sensory Demands He/she may at times be exposed to dangerous and/or toxic substances and must take necessary precautions to protect eyes, nose and skin from irritation and infection. Mental Demands The superintendent must work with the team and is expected to maintain a schedule of work. Proper and efficient management of all projects is required. Any variation from these means that lengthens the project not caused by unforeseen conditions is unacceptable. Any problems or inconveniences may result in increased stress to complete tasks in a limited time. Bonus Requirements For the superintendent to be eligible for bonus compensation, the following stipulations apply: • The project manager must promote and work: Safely , All day., • Project deadlines must be met, unless of:, • Excessive inclement weather beyond the estimated allowance per project, • Change orders, • Forces of Muejer, • Unforeseen conditions or scope, • Unforeseen equipment downtime, • Company vehicle must only be used for company business, • Maintain routine maintenance, • Cleanliness, • Safety items, • Random Drug Screenings, • Clean MVR, as stated by our insurance company, • Positive attitude and a willing to exceed expectations, • Paperwork completed neatly and on time, • Maintain a team atmosphereRequirements:

Job Description Job Summary: Primary responsibility of the Field Service Technician is to maintain, service and repair the company's mechanical equipment including pumps, generators and related equipment. The Field Service Technician will serve as a working team member and individual contributor to the overall team's success. What we offer our Field Service Technicians: • Weekly pay, • Boot reimbursement (up to $150) and apparel credit (up to $100), • Full benefits including medical, dental, vision, 401k with company match, • Tuition reimbursement (up to $5,250), • Advancement opportunities and continuous skill building, • Annual merit increases Typical Duties and Responsibilities: • Service, repair and maintain the company's diesel pumps, fleet and mechanical equipment, • Perform repairs and maintenance on company equipment at job sites as required, • Perform quality checks on repaired equipment, • Maintain complete and accurate service records on all equipment serviced, • Tune up wellpoint systems as required, • Complete required documentation of all repairs and service as per company procedure, • Maintain workspaces and promote shop safety by cleaning work areas and removing hazardous materials, • Adhere to applicable company and regulatory agency environmental, health and safety standards Qualifications: • High school diploma or equivalent experience required, • Experience diagnosing, servicing, and repairing large equipment preferred, • Appropriate repair certifications desired, • Ability to obtain a valid DOT Medical Card, • This job has specific DOT requirements. Please see the link: https://www.ecfr.gov/current/title-49/subtitle-B/chapter-III/subchapter-B/part-391 Specific Expectations: • Planning and organizational skills in handling multiple projects, • Ability to work long hours in extreme weather conditions, • Excellent internal and external customer service skills, • Travel and answer emergency calls during non-business hours, • Work effectively with others, • Multi-task in a changing environment, • Self-motivated, ability to perform tasks with little or no direction, • Ability to work a flexible schedule to meet job requirements, • Strong time management and organizational skills, • Required intermittent periods during which continuous physical exertion is required, such as walking, standing, stooping, climbing, lifting material or equipment, some of which may be heavy or awkward #INDHP

Job Description Overview: We are looking for a highly organized and efficient Site Project Administrator to join our Critical Technologies team. The role involves supporting the on-site project team with administrative tasks, maintaining accurate documentation, and assisting in the coordination of project schedules, materials, and labor. The Site Project Administrator will play a crucial role in ensuring smooth communication between the office, project managers, subcontractors, and field staff, while maintaining compliance with all company and project-specific processes. This is a fantastic opportunity for a detail-oriented professional with experience in project administration to thrive in a dynamic, fast-paced environment. Key Responsibilities: • Provide on-site administrative support to Project Managers and site teams., • Manage and maintain all project documentation, including contracts, compliance records, schedules, daily reports, and change orders., • Assist in the coordination of project schedules, ensuring timely updates and tracking of milestones., • Serve as a liaison between office staff, field technicians, subcontractors, and suppliers., • Facilitate site visits and inspections to ensure compliance with project requirements and report on progress., • Track labor hours, attendance, and material deliveries to maintain accurate records., • Assist with the preparation of change orders, purchase orders, and material requisitions., • Organize and participate in project meetings, taking detailed minutes and distributing them to relevant parties., • Monitor subcontractor performance, flagging issues for the project management team and helping resolve on-site challenges., • Coordinate project material logistics and track inventory for project site needs., • Ensure all project documentation is up to date, organized, and easily accessible in the appropriate digital storage systems. Qualifications: • 2-5 years of experience in project administration, preferably in construction, HVAC, or mechanical systems., • Strong proficiency in Microsoft Office Suite and experience with project management software., • Familiarity with Smartsheet or other project tracking tools is a plus., • Experience with managing and organizing Bills of Materials (BOMs), procurement processes, and documentation for project audits., • Ability to track schedules, labor hours, and material deliveries with a high level of accuracy., • Strong organizational skills with the ability to manage multiple tasks simultaneously., • Excellent written and verbal communication skills, including the ability to prepare reports and document meeting minutes., • Regular travel to project sites is required. This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Building Technologies. No phone calls or drop-ins please. EEO Employer/Vets/Disabled

Job DescriptionSalary: Primary Function: Provide overall technical management for construction projects. Responsible for ensuring the timely and costly completion of construction projects by overseeing all phases of the project. Responsibilities: • Leads, motivates, and supports the project team in all efforts for safety, quality control and schedule adherence associated with the project., • Proactively reads and interprets plans and specifications from Architect/Engineer and can communicate these to others., • Works with a variety of stakeholders to schedule and plan work, coordinate equipment and materials, and monitor overall progress., • Liaison with clients and building strong working relationships., • Devises cost-effective plans to enable effective project completion., • Ensures project(s) operate within budget., • Understands Contract with the Owner and the requirements it places on the project team, especially with regard to proper notice procedures., • Obtains necessary permits, approvals, and other regulatory prerequisites., • Creates Agenda for project meetings., • Create documents such as Subcontracts, Purchase Orders, Change Orders, Profit Forecasts and Pay Applications within the company technology program., • Performs quantity take-offs and unit pricing., • Creates Monthly Progress Reports for the Program/Project., • Negotiates subcontracts and change orders with subcontractors/suppliers., • Negotiates change orders with Owners., • Creates owner letters and RFIs., • Assists in preparation of RFQ or RFP (when requested)., • Ability to see project progression 6 months to one year ahead., • Familiar with the responsibilities of a Superintendent., • Mentors and trains assigned Assistant Project Managers and Project Engineers., • Reviews submittals for compliance with the Contract Documents and process to Design Engineers for review and approval., • Pursues Contractor licensing and professional certifications (when requested)., • Participates in the Presentation of RFPs., • Become a member of a construction recognized organization at the local/state/national level (when requested)., • Identifies, nurtures, and solicits future business opportunities for M. B. Kahn., • Complies with M. B. Kahns Safety Program, OSHA guidelines, and Company policies, procedures, and standards., • Promotes integrity, honesty, hard work, safety, and quality throughout all aspects of the project and is a professional representative of M. B. Kahn., • Performs additional assignments as directed by management or as required for successful project completion. Required Certification/Training • Completed OSHA 30 Hour Course for Construction Required Skills/Abilities: • Proficient in all aspects of Assistant Project Manager., • Thorough understanding and proficient use of project management software or similar software., • Ability to create a complex schedule using Microsoft Project or similar software., • Proficiency in Microsoft Word, Excel, and PowerPoint., • Demonstrates excellent organizational, interpersonal, and communication skills both written and verbal., • Ability to work independently.

Job Description Kwest Concrete Finisher Position Description Position: Concrete Finisher Report to: General Supervision / Site Foreman Job Description Overview Team members classified as Concrete Finishers will be required to smooth and finish concrete surfaces to specified texture and depth. Concrete Finishers must be capable of setting forms, edging, and bullfloating. Concrete Finishers will report to the Concrete Foreman, while also taking direction from the Site Foreman. Team members will closely interact with other trade individuals on site. Safety training by the company will be required for all team members. Out-of-town work is probable and may require travel of up to three weeks away from home at a time. Dependable attendance and punctuality are critical. Wage: $29.94 to $33.74 per hour Responsibilities • Pour and spread concrete to specified depth and workable consistency by using rakes, shovels, hand or power tools and floats., • Use a float to bring water to surface and produce a soft topping., • Remove rough and defective spots from concrete surfaces by using a power grinder or a chisel and hammer., • Use straightedge, float, or power screed to flatten, smooth and form freshly poured concrete., • Patch holes with new concrete or epoxy compound., • Apply hardening and sealing mixes to cure concrete services., • Strengthen concrete by installing reinforcement rods., • Use edging tools, jointers, and straightedges to sprinkle joints and edges and mold expansion joints., • Inspect forms for appropriate structure and set to chosen pitches., • Ability to direct subgrade work, mixing of concrete and set forms., • Set forms to suitable elevation., • Prepare bases and install support materials., • Ability to properly cut joints and grooves to ensure smooth and level concrete., • Compress concrete by using power equipment., • Use power tools, wets and rub the concrete with appropriate stone to ensure clean finish. Education and Qualifications • A high school diploma, GED, or trade school certificate is preferred., • 5 years of concrete finishing experience or completion of apprenticeship program., • Ability to read understand measuring and leveling tools., • Ability to follow direction, but be able to self-supervise, when needed., • Must be able to compare and see differences in size, shape, and form of lines, figures, and objects., • Must be able to work flexible hours, including evenings and weekends as required., • The average work week would consist of 5 ten-hour days, but schedule will be dictated by project needs., • Must be able to work out of town, sometimes out of state, and for lengths of time, such as the job would dictate., • Your skills and certifications are valuable, and Kwest recognizes it. Any special certifications or skills that are constructive to the position responsibilities will be taken into consideration when reviewing wage classification., • Clean driving record., • Working knowledge of construction site safety, truck maintenance, and road safety regulations., • Will be required to pass a pre-employment drug screening, and if offered a position, any random drug screening if randomly selected., • Must attend all mandatory safety meetings and participate in discussions with the work crew and any safety personnel on site., • Must be over 18 to operate power-driven saws including chain saws, woodchippers, abrasive cutting disks, or other power-driven equipment, or to perform excavating operations. Working Conditions & Physical Demands • Travel from site to site will be required., • Work environment will normally be an active construction site. Exposure to dust, noise, high heat, extreme cold, and rain should be expected., • Team member must be physically able to perform repetitive motion and heavy lifting, as described below., • Must be able to maintain effective audio and visual discrimination and perception to the degree necessary for the successful performance of assigned duties., • Must wear all employer-mandated personal protective equipment, including hard hat, safety glasses, ear plugs, safety vests, and safety-toed work boots. Other PPE may be required from time to time depending on special safety concerns. All PPE will be provided by the company at no cost to the employee, other than safety boots., • Must be able to hear with or without the use of a hearing device and clearly see at least 30 feet with or without the use of corrective vision lens., • Must be able work while wearing a respirator if necessary., • Alternate standing and walking on uneven terrain surfaces, such as hillsides, muddy and icy soils, and other working surfaces. Safe negotiation of all types of surface conditions will always be required., • Bending, squatting, and kneeling will be required frequently during a workday., • Continual lifting of up to 50 lbs. for distances of 30 feet or more., • Constant pushing and pulling of certain tools and materials will be required over a day’s work., • The team member must be able to differentiate and / or identify colors., • Must have knowledge of occupational hazards in this field and standard safety practices. Must be able to pass the 30 Hour OSHA testing and First Aid/CPR requirements before starting work., • Must complete and meet requirements under the physical demands of this job description through a pre-employment physical examination. About Kwest Group At Kwest Group, we are driven by a clear mission: to lead the civil construction industry through an unwavering commitment to safety, quality, and customer service. As a 100% employee-owned company (ESOP), we empower our team members to take ownership of every project, fostering innovation and excellence from concept to completion. Central to our mission is a steadfast commitment to ensuring zero harm to every team member on every project. This commitment to zero harm is complemented by a comprehensive focus on total human health. Founded in 2003, Kwest Group has grown from its roots in Port Clinton, Ohio, to become a trusted partner across the United States and the Caribbean. Our journey is defined by building strong, lasting relationships with our clients, grounded in mutual trust, integrity, and a deep understanding of their unique needs. Core Values Our core values—Safety, Quality, and Customer Service—are the pillars that support everything we do. These values guide our decisions, shape our culture, and ensure that every project meets the highest standards. Core Focus Our core focus is to enrich the lives of our team members by fostering strategic growth and profitability, ensuring a safe, thriving, and values-driven company. We believe that by investing in our people, we create a foundation for long-term success that benefits our clients, team members, and communities Our Niche Kwest Group excels in performing complex civil construction projects safely. Our expertise enables us to tackle the most demanding projects with confidence, delivering exceptional results that our clients can rely on. Target Market Our target market includes energy, industrial, public, federal, and rail clients across the United States, with particular emphasis on the Midwest, Appalachia, and Southeast regions. We remain open to engaging with like-minded partners from any location when the right opportunity arises. We seek clients who exhibit financial stability, align with our core values, foster collaborative relationships, and share a forward-thinking perspective. Four Uniques Kwest Group stands out in the industry with our four uniques: • Safety Priority: Safety is ingrained in our culture and is our foremost commitment on every project., • Agile Team: Our adaptable and responsive team is capable of quickly adjusting to the evolving needs of our clients and projects., • Collaborative Construction Services: We foster strategic partnerships and interconnected relationships to deliver superior outcomes., • Team Integrity Focus: Integrity guides our team’s actions, ensuring transparency, fairness, and accountability throughout our organization. Our dedication to safety and excellence has been recognized industry wide. Kwest Group was honored as the Associated Builders and Contractors (ABC) 2024 Contractor of the Year and has received national safety recognition awards from prestigious organizations like ABC and the Associated General Contractors of America (AGC). At Kwest Group, we are also dedicated to making a positive impact beyond our project sites. Our Environmental, Social, and Governance (ESG) initiatives reflect our commitment to responsible business practices, from reducing our carbon footprint to fostering a diverse and inclusive workplace. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the team member for this job. Duties, responsibilities, and activities may change at any time, with or without notice. EEO Kwest Group maintains a non-discrimination policy for all team members and applicants in every facet of the company’s operations. In compliance with federal and state laws, Kwest Group recruits, hires, trains, and promotes all qualified team members, in all job titles, without unlawful discrimination based on race, color, creed, religion, sex, gender identity or expression, sexual orientation, pregnancy, age, citizenship, national origin, disability, veteran status or genetic information.

Job Description Southeastern Salvage Home Emporium, Columbia's most unique shopping destination, is now interviewing retail associates for full time positions. Duties will include sales and customer service, merchandising, stocking and inventory, housekeeping and other retail responsibilities as assigned. Now hiring for the following full time positions: Front End / Cashiers Receiving Sales Associates -Requirements: -18 years or older and a high-school graduate (GED equivalent) -Prior retail experience Prefered (big box, specialty or dept. store) -Reliable transportation to and from work. -Must work a flexible schedule including days, evenings, weekends and holidays. -Able to work in a warehouse setting and tolerant of heat, cold and dust. -Able to climb up and down ladders, reach, bend, twist, kneel and lift up to 65 lbs. -Must not use illegal drugs in any form (pre-employment screening required) -Must have no prior criminal history (pre-employment screening required) Benefits: Health, dental, vision, life and other benefits available after 60 days Job Type: Full-time

Job DescriptionWarehouse Specialist (Part-Time) This position is responsible for supporting warehouse operations through receiving, organizing, and distributing products and materials. This role reports to the Market Manager. Who we're looking for: The right candidate will be a dependable, detail-oriented individual who enjoys hands-on work and thrives in a team environment. Ideal candidates are current college students seeking part-time employment while gaining professional work experience. A positive attitude, reliability, and willingness to learn are key. Who We Are: Your Bridge to Success | Why Our People Love Affinity Group Affinity Group is one of the fastest-growing food sales and marketing agencies, with a national presence throughout North America and Canada. We represent some of the most recognizable and well-regarded food brands in the industry. Supported by the corporate sales support team, you’ll be part of a team that drives brand awareness and increases market demand for our clients. Affinity Group brings decades of expertise and a consultative system that is tailored for a localized approach. A typical week might include the following: • Loading and unloading food products, freight, and POS materials, • Receiving deliveries and stocking warehouse inventory, • Organizing coolers, freezers, and warehouse storage areas, • Assisting with sample preparation for sales presentations and food shows, • Light facilities cleaning and general housekeeping (sweeping, tidying, garbage removal), • Supporting sales and culinary teams with event setup and breakdown, • Communicating effectively with teammates and managers to ensure smooth operations The role might be right for you if you have: • Experience in a warehouse, retail, or manual labor role preferred (but not required), • A valid driver’s license, reliable transportation, and safe driving record, • Ability to lift and carry up to 40–50 lbs. regularly, • Comfort working in refrigerated and freezer environments at times, • Strong organizational and communication skills, • Team-oriented mindset and willingness to learn new tasks, • Eligibility to work in the U.S. What to expect: • Schedule: Part-time, no more than 28 hours per week; flexibility may be required during food show season, • Environment: Standing, lifting, and moving materials in warehouse and cold storage settings, • Travel: Occasional local errands or deliveries may be required How We Make Room for You • Competitive hourly wage, • 401(k) retirement plan with employer contributions (age 21+ only), • Professional experience and skill-building in a growing organizationPay Range: $16-$18/hr The Affinity Group is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. All employment is decided on the basis of qualifications, merit, and business need. Powered by JazzHR TjYzhsRA0g

Job DescriptionDescription: Join our team at a brand-new, state-of-the-art facility where you’ll play a key role in supporting quality and production. We are looking for a hands-on Lab Technician who enjoys working in a fast-paced environment and takes pride in producing accurate, high-quality work. In this role, you’ll help ensure our adhesive and tape products meet both company and customer standards through testing, analysis, and collaboration with internal teams. What you’ll do: • Perform laboratory tests to evaluate physical and mechanical characteristics of adhesive systems, tapes, laminates, and foams, • Set up, adjust, and operate laboratory equipment, including but not limited to: tensile testers, tack testers, laboratory ovens, and scales, • Test raw materials and finished goods to verify conformity to internal and customer specifications, • Accurately record test results using standardized forms, spreadsheets, and databases, • Prepare Certificates of Analysis or Certificates of Conformance as required, • Identify and communicate non-conforming materials to appropriate internal stakeholders, • Prepare graphs, charts, reports, or data summaries including both quantitative and qualitative data to support trend analysis when requested, • Prepare samples for internal testing and customer evaluation purposes, • Maintain a clean, organized, and safe laboratory environment in compliance with company policies, • Take pride in daily work, valuing excellence in execution of routine tasks, • Monitor laboratory inventory and ensure adequate supply of materials, tools, and personal protective equipment, • Follow production schedules and product tracking requirements, • Utilize inventory or material tracking systems as required (training provided if needed), • Perform additional duties as assigned to support departmental and operational goals This is a great opportunity to join a growing operation and contribute to building strong quality processes from the ground up. Requirements: What we're looking for: • Associate degree in a related field OR 6–12 months of lab or manufacturing experience (or a combination of both), • Ability to operate basic laboratory testing equipment or learn through on-the-job training, • Basic computer skills, including spreadsheet and word-processing applications, • Ability to accurately document and communicate quantitative and qualitative test results, • Strong attention to detail and quality standards, • Ability to follow written procedures and safety guidelines, • Willingness and ability to work overtime, including short-notice requests, • Commitment to workplace safety and cleanliness Mathematical Skills • Ability to perform basic arithmetic, including addition, subtraction, multiplication, and division, • Ability to work with measurements involving weight, volume, area, and distance, • Proficiency in using and converting between metric and US imperial units of measurement, • An understanding of basic statistics (mean, range, standard deviation) is preferred Physical Demands • Regular standing, walking, reaching, and use of hands, • Frequent lifting and movement of materials up to 20–50 pounds; occasional lifting of 50 pounds or more, • Ability to bend, stoop, kneel, crouch, or climb as needed, • Exposure to moving mechanical parts and airborne particles typical of a manufacturing environment, • Use of required personal protective equipment Work Environment • Laboratory and manufacturing setting, • Standard noise levels, • Will handle small amounts of organic chemical solvents for cleaning, • Emphasis on safety, cleanliness, and compliance with company policies, • Work hours primarily between 8am and 5pm, Monday – Friday ATP North America LLC is an Equal Opportunity Employer. We conduct all employment-related activities in full compliance with applicable federal, state, and local laws and without regard to age, color, gender, gender expression, sexual orientation, disability, marital status, national origin, citizenship, race, religion, veteran status, or any other legally protected categories. No person will be discriminated against in hiring or any other aspect of employment, including but not limited to training, responsibilities, transfer, promotion, compensation, and benefits. We are committed to creating an inclusive and diverse workplace and encourage individuals of all backgrounds to apply.

Job Description The Building People, LLC, has a position open for a full-time Cost Engineer/Estimator in Columbia, SC. The Engineering Technician shall assist provide the customer with technical support and inspection services relating to maintenance, repair, or alteration of buildings, utilities, parking areas, roadways, and other work/projects on both leased and owned properties. Responsibilities/Duties • Utilize Facilities Management software to review estimates submitted by contractors for maintenance, repair, construction, and other work to assure conformance with customer requirements. Ensures that proposals are technically sound and in compliance with Army regulations., • Performs technical review & evaluation of plans and reports required to be submitted by the contractor including: Preventative Maintenance Plans for building structures, Quality Assurance Plans, as-built drawings, shop drawing submissions, and change order requests., • Reviews drawings and specifications developed by A/E firms for adherence to design requirements, code limitations, and civil, structural, architectural, and engineering fundamentals and principles., • Prepares cost estimates, technical specifications, preliminary sketches, & scopes of work for the contract purchase of complex repair and construction items, designs, and plans for alterations, remodeling, and repairs to various types of facilities, machinery, and equipment, new construction, and the development of contracts with organizational policies and procedures., • To include estimating the cost of manpower and material, estimating length of time the projects will require, determining and analyzing alternatives when appropriate., • Prepares contract modifications and design deficiency reports., • May be required to make site visits for the purpose of studying conditions/gathering information to be used in preparation of drawings, etc., • Other duties as assigned. *This position will not have supervisory responsibilities. Required Experience & Skills To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Detailed knowledge of methods and techniques of engineering and the construction, application, properties, operation, and limitations of engineering systems, processes, structures, machinery, devices, and materials., • Knowledge and experience of HVAC systems, machinery, plumbing/piping, ventilation, fire protection, digging, shoring, lighting, and similar types of equipment and systems., • Experience conducting building inspections/facility condition assessments., • Must possess practical working knowledge and experience to develop detailed specifications, cost estimates, and project schedules., • Must be able to read and interpret drawings and blueprints., • Ability to work independently, efficiently, and prioritize effectively in order meet project deliverables and deadlines. Must be flexible and be able to adapt to rapidly changing requirements and timelines., • Familiarity with standard CMMS systems, RS Means & various industry estimating tools, Auto-CAD, MicroStation, and Microsoft Suite., • Must be able to read and accurately interpret contract documents., • Must always be able to communicate effectively and in a professional manner. Physical Demands - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee may be asked to walk/stand/bend/climb for extended periods. The employee may occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. May be asked to drive for several hours during the course of site inspections/investigations. Work Environment - The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee will normally work in a temperature-controlled office environment, with frequent exposure to electronic office equipment. During visits to areas of operations, may be exposed to extreme cold or hot weather conditions. Is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and loud noise. Required Education • Bachelor's degree (B. A.) from an accredited college or university and a minimum of three (3) years of experience, or five (5) plus years of related experience and/or training or equivalent combination of education and experience. Certificates, Licenses, Registrations, Clearance: • Currently favorable, or eligible for a National Agency Check with Inquiry (NACI) clearance, in accordance with AR 38067., • Valid Driver’s License., • EEP, CEM, or Tridium N4 certifications preferred but not required.

Job Description Structural Engineer Columbia, SC $75,000-$120,000 + Full Benefits + Relocation Assistance if needed About Us: Join our dynamic, integrated design firm where architects and engineers collaborate to create innovative, sustainable solutions. We value a diverse team and offer a supportive environment where you can thrive and contribute to impactful projects. Responsibilities: Report directly to the Structural Engineering Department Director. Collaborate with team members across disciplines to deliver comprehensive design solutions. Conduct structural analyses and design calculations using industry-standard software. Prepare detailed construction drawings, specifications, and shop drawing reviews. Coordinate with contractors and clients to ensure project success. Qualifications: Professional (ABET Accredited) Degree in Structural Engineering. PE registration in SC (or ability to quickly acquire same). NCEES registration (or ability to secure same). Minimum 2 years' experience as a registered PE in structural design with a variety of building materials. Strong understanding of building codes and regulations (ICC, ASCE, ACI, AISC, AISI, TMS, FM Global). Proficiency in AutoCAD, Revit, MS Office Suite, and structural analysis software (RAM Structural Systems, ENERCALC, or similar). Experience with renovation, upfit, expansion, and industrial/distribution/logistics projects. Excellent communication and interpersonal skills. Ability to work independently and as part of a team. Benefits: Competitive salary and benefits package Opportunities for professional development Collaborative and supportive work environment

Job Description Geotechnical Project Engineer Requisition Number: 2026-1610-07 S&ME is seeking a Geotechnical Project Engineer to join our Geotechnical team, supporting work across our Columbia, South Carolina, and Augusta, Georgia offices. This role offers regional project exposure, technical growth, and the opportunity to collaborate with multidisciplinary teams on a wide range of geotechnical projects. As a Geotechnical Project Engineer, you will support and lead geotechnical engineering projects from planning through completion, applying sound engineering judgment to real-world site and subsurface conditions. You'll work closely with project managers, field and laboratory teams, and clients to analyze data, develop practical recommendations, and deliver clear, timely reports that support building and infrastructure projects across public and private sectors. This role blends technical analysis, project coordination, and client interaction, offering hands-on experience and growth alongside experienced geotechnical professionals. Your Day-to-Day: • Project Coordination & Execution: Support and manage geotechnical investigations by coordinating subsurface explorations, field observations, and laboratory testing to meet project scope, schedule, and budget, • Technical Analysis & Engineering Judgment: Analyze soil, rock, and groundwater data to develop practical geotechnical recommendations for foundations, earthwork, pavements, and site development, • Reporting & Documentation: Prepare geotechnical engineering reports, calculations, and design recommendations that clearly communicate findings, risks, and assumptions to clients and project teams, • Client & Team Collaboration: Coordinate with project managers, field staff, subcontractors, and clients to address project questions, changing conditions, and technical challenges, • Mentorship & Safety Focus: Work alongside and mentor junior staff while promoting a strong safety, quality, and professional development culture What You Bring: • Bachelor's degree in Civil, Geotechnical, Mining, or a related engineering field., • 4+ years of related geotechnical engineering experience, which preferably includes some extent of project management responsibilities., • Professional Engineer (PE) license or the ability to obtain within 6 months of hire We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. Here's what you can look forward to: • Medical, Dental & Vision Plans with HSA and FSA options, • Wellness Program - $50 off per month on your 2027 premiums!, • Pet Insurance, • Term Life & Long-Term Care Coverage - available Spring 2026, • 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution, • 401(k) Retirement Plan, • Paid Holidays and Paid Time Off (PTO) - with rollover options, • Paid Maternity & Parental Leave, • Mentorship & Career Development Programs, • Credential Incentive Program - get rewarded for advancing your skills, • Tuition Reimbursement, • Employee Recognition Program, • Company Vehicle & Fuel Card - for project-based roles, • $2,000 Employee Referral Bonuses - and more! If you are seeking a challenging and rewarding career with a firm committed to our employees and providing quality service to our clients, join our team! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job Description Sevan Multi-Site Solutions is a veteran-owned business that provides construction, program management, real estate & site development, and architecture & engineering services for restaurant, grocery, fuel and convenience store, retail, and government sectors nationwide. We work with leading brands like McDonald’s, Starbucks, Sprouts, and BP, to name a few. At Sevan, we provide the talent, technology, and trusted expertise needed to consistently deliver excellence in multi-site construction. Sevan is nationally recognized for workplace culture, industry leadership, and safety. Recent honors include 12 consecutive years as a Great Place to Work®, placement on ENR's national Program and Construction Management rankings, recognition as one of America's Safest Companies for 2025, and the 2025 Platinum HIRE Vets Medallion Award. Summary: The Carpenter has knowledge of various carpentry techniques and is responsible for layout, installation, repairing, finishing, and maintaining various structures and fixtures in residential buildings. This role will install cabinets, shelving, drywall and insulation while also adding fixtures and fittings such as door handles, locks and hinges. Other duties will include cutting and measuring materials according to a client's requirements. A successful Carpenter is hardworking, reliable, and be detail oriented. Essential Duties and Responsibilities: • Read blueprints, drawings and sketches to fully grasp requirements., • Take measurements and calculating the size and amount of material needed., • Cutting, shaping, and smoothing of lumber and other material according to measurements., • Install of windows and doors., • Assemble furniture, cabinets, shelves and other items., • Build scaffolding and other construction structures., • Finishing trim and rough carpentry., • Touching up and punch-listing all trim and drywall items, as well as fix door and hardware issues., • Install exterior façade of building., • Other duties as needed. Qualifications: • High school diploma or GED., • Successful completion of a carpentry apprenticeship program preferred., • Proven experience as a carpenter., • Hands-on experience in working with carpentry materials., • Punchlist experience., • Completion of OSHA 10 or 30, or ability to complete., • Possess competent knowledge of the use and care of tools and equipment used in carpentry,, • Positive Attitude, • Initiative, • Flexibility, • Multi-Tasking, • Sense of Urgency, • Ability to lift, carry, push, and pull up to 50 pounds., • Ability to bend, climb, squat, reach, and kneel., • Willingness to do non-trade specific items., • Excellent understanding of carpentry techniques and methods of installation and construction., • Proficient in using electrical and manual equipment and measurement tools (powered saws, hammers, tape measures etc.)., • Ability to read technical documents and drawings., • A willingness to always follow safety guidelines., • Good communication and organizational skills. Why Join Sevan? At Sevan, we believe in creating a supportive and dynamic environment where your contributions truly matter. Here’s what you can expect as part of our team: • Live Our Values: Join a company that values integrity, respect, teamwork, excellence, and charity. These principles are at the heart of everything we do., • Champion Key Initiatives: Play a vital role in driving Sevan-wide initiatives like Safety and Sustainability, ensuring positive impacts for our people and the planet., • Inspire and Lead: Help us bring our vision to life by embracing our commitment to Service, Talent, and Choices—you’ll have a voice in shaping the future., • Set the Standard: Be a role model for professional behavior, fostering a workplace culture that motivates and inspires others., • Grow With Us: Take charge of your personal and professional growth through hands-on experience, engaging training programs, and opportunities to mentor interns and co-ops., • Support Development of Top Brands: Opportunity to work behind the scenes supporting efforts for industry leaders like McDonald’s, Starbucks, and 7-Eleven. Pay & Benefits: • Pay range: $22-$31 per hour., • Actual pay depends on education, experience, and performance., • Benefits include dental, vision, paid holidays, sick time.Work Conditions: This is a fully on-site role at the project location(s). Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine. Involves movement between floors, and properties to facilitate work. Ability to speak clearly so others can understand you. Sevan Multi-Site Solutions, Inc. is proud to be an equal opportunity employer committed to a diverse and inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, marital status, genetics, disability, pregnancy, veteran status or any other basis protected by law.