Trabajos commercial electrical en Atlanta, Georgia - Page 2Crear alertas

Job Description As an HVAC Service Technician, you will perform service and maintenance tasks on commercial HVAC equipment. Comprehensive Benefits • Wage Range Starting at: $30.00-$40.00+/hr. based on qualifications & experience Job Duties • Perform assigned HVAC maintenance and troubleshooting task safely in commercial and industrial settings, • Service, diagnose and troubleshoot various types of split systems, packaged rooftop, and chillers, • Utilize electrical and mechanical diagnostic skills, • Perform preventative maintenance and repair of commercial HVAC equipment as needed, • Complete required electronic documentation daily on a handheld device, • Work independently to complete assigned tasks within an allotted time frame, • Operate company vehicle to complete service calls in a specified territory Requirements • 5 or more years of experience repairing and troubleshooting commercial HVAC equipment, • EPA universal certification, • Analytical and problem-solving skills, • Communication and customer service skills, • Experience with chilled water or boiler systems preferred, • OSHA 10 certification (the company will provide if needed) Additional Requirements • Ability to pass a full background screening, MVR and drug screening, • Medical, Vision, Dental, • Paid holiday and vacation, • 401(k) Plan with multiple investment options, • Training and Development Programs, • Company-paid Employee Assistance Program, • Employee discount programs, • Company-paid and voluntary life insurance, • Company-paid and voluntary accidental death & dismemberment (AD&D), • Company-paid short-term disability and voluntary long-term disability, • Healthcare reimbursement account and dependent care reimbursement account, • Vehicle discount purchase programs Disclaimer Comfort Systems USA, Southeast provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Company DescriptionComfort Systems USA Southeast is one of the largest commercial mechanical contractors in the southeast. We specialize in the installation of mechanical and plumbing systems, maintenance and repair of building systems and the installation and service of building automation systems. We partner with healthcare, educational, government, commercial, and industrial clients to provide expert craftsmanship and quality service.Comfort Systems USA Southeast is one of the largest commercial mechanical contractors in the southeast. We specialize in the installation of mechanical and plumbing systems, maintenance and repair of building systems and the installation and service of building automation systems. We partner with healthcare, educational, government, commercial, and industrial clients to provide expert craftsmanship and quality service.

Job Description JOB SUMMARY Experienced HVAC Service Technicians (Journeyman) will be required to perform skilled work in the installation, repair, and maintenance of heating, ventilation, and air conditioning equipment systems. Under the direction of the service manager a technician will install, diagnose, inspect, repair, and maintain and service a wide variety of mechanical equipment. DUTIES & ESSENTIAL JOB FUNCTIONS · Install, diagnose, inspect, repair, maintain, and service a wide variety of heating, ventilation, and air conditioning equipment and systems. · Repair and maintain hot water systems, wall heaters, ventilation units and air conditioning units. · Replace fans, belts, motors, gaskets, filters, and compressors. · Adjust and install switches, gauges, thermostats, valves, tubing, transformers, pressure regulators, controllers, and other parts. · Descale tubing, cut and thread pipe, make pipe and electrical connections. · Add refrigerants and oil; test for defective parts; make electrical repairs related to air conditioning, heating, and ventilation equipment. · Determine requirements for parts, materials, supplies, tools and equipment; establish cost of repairs and equipment replacement; check and test new equipment. · Operate specialized machinery, equipment and tools utilized in the repair and maintenance of heating, ventilation and air conditioning. · Maintain tools, equipment, and supplies in a safe and orderly condition. · Perform related duties that are assigned. BASIC QUALIFICATIONS · HVAC Apprenticeship School or Technical School training with combination of at least 7 years of Service Technician experience. · Valid driver’s license. Employees in this classification must maintain insurability during the term of employment. · Universal EPA Certification PREFERRED QUALIFICATIONS · Standard practices and theory of the HVAC trade · Materials, methods and tools used in the operation and repair of Commercial HVAC systems. · Applicable building codes, ordinances, and regulations of state and local authorities pertaining to Commercial HVAC · Air compressors and pneumatic controls. · Health and Safety regulations · Basic record-keeping techniques · Proper methods of storing equipment, materials, and supplies KNOWLEDGE, SKILLS, ABILITIES, AND CHARACTERISTICS · Calibrate systems · Perform preventative maintenance and routine servicing of equipment. · Diagnose defects and install, repair, and maintain heating, ventilating, and air conditioning units. · Interpret and work from plans, diagrams, blueprints, shop drawings, sketches, and specifications · Follow oral/written instructions and directions · Operate specialized machinery, equipment and tools utilized in the repair, and maintenance of heating, ventilation, and air conditioning. · Communicate effectively both orally and in writing. · Work cooperatively with others. · Work independently with little direction · Meet schedules and time lines · Maintain routine records WORKING CONDITIONS AND PHYSICAL EFFORT · Work involves moderate exposure to elements, such as hot/cold temperatures, dirt, dust, and/or loud noises. · Work environment involves some exposure to construction, mechanical and electrical-related hazards or physical risks, which require following basic safety precautions. · Moderate physical effort. Requires handling of average-weight objects up to 50 pounds and extensive standing and walking. · Work requires local and occasional out-of-town travel to job sites and customer locations. · Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and scaffolds and to negotiate work areas under construction. Moving Safety Forward, our initiative for continuous improvements in our safety culture, reminds us that we are on a journey toward a zero-incident culture. In all we do, we must work to build a partnership with our employees, customers and business associates that empowers them all with the ability to do their jobs safely. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR PvEjitFKRZ

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. Commercial HVAC Service Technician Location: Conyers, GA | Atlanta Metro Area Company Truck + Fuel Card | Insurance + 401(k) offered Overview Strictly Mechanical is hiring Service Technicians to join our growing team in the Atlanta Metro area. If you're a skilled tech who enjoys troubleshooting complex systems, working independently, and delivering top-tier service - this is a great opportunity with a stable, well-supported company. What You'll Do (Responsibilities)As a Service Technician, you will install, diagnose, repair, and maintain commercial HVAC systems while providing excellent customer service. Responsibilities include: • Diagnose and repair issues on commercial HVAC equipment (RTUs, split systems, refrigeration, etc.), • Perform preventative maintenance and system calibrations to manufacturer specifications, • Read and interpret schematics, wiring diagrams, and blueprints, • Communicate findings, recommendations, and solutions clearly with customers and internal teams, • Travel to job sites across the Atlanta Metro area and manage service calls with dispatch, • Document work performed, parts used, and service details via mobile device, • Maintain service vehicle, inventory, tools, and safety equipment, • Participate in ongoing technical training and development, • High school diploma or GED, • HVAC vocational/technical training or completed apprenticeship, • 5+ years of commercial HVAC service experience, • EPA Certification (Type II or Universal), • Valid driver's license with a clean driving record, • Strong troubleshooting and diagnostic skills, • NATE CertificationWhat We Offer (Compensation & Benefits), • 401(k) + 5% company match, • Company truck + fuel card, • Health, Dental, and Vision insurance, • Health Savings Account (HSA), • Life Insurance, • Paid time off + paid holidays, • Tuition reimbursement & professional development assistance Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job Description Are you someone who enjoys hands-on work, learning in the field, and building skills that lead to a long-term career? If you’re dependable, motivated to learn, and ready to grow in a skilled trade, this role may be a great fit. Fire Protection Services, LLC is seeking a Fire Inspections Apprentice to support fire and life safety inspections across our commercial customer base. This is a developmental, field-based role designed to provide hands-on training and mentorship while working alongside certified Inspectors and Technicians. What You’ll Be Doing • Support inspections, testing, service, and maintenance of fire alarm systems and/or PFE & kitchen hood systems under supervision, • Prepare tools, testing devices, and materials for inspections, • Assist with documenting inspection results accurately and consistently, • Learn to identify system deficiencies and assist with troubleshooting as directed, • Participate in on-the-job training and certification programs, • Follow safety procedures, company standards, and documentation requirements, • Interact professionally with customers, site contacts, and internal team membersWhat We’re Looking For, • Honest, reliable, and punctual with a strong work ethic, • Willingness to learn technical systems and follow procedures, • Interest in fire alarm or fire & life safety systems, • Ability to complete assignments with increasing independence as skills develop, • Basic mechanical or electrical aptitude preferred, • Familiarity with mobile devices or digital documentation tools, • Valid driver’s license with an acceptable driving record, • Relentless Hustle – Show up ready to learn and keep work moving, • Relationships First – Treat customers and teammates with professionalism and respect, • Better Together – Work collaboratively to get the job done right Ready to build a career in a skilled trade with real growth potential? Apply today! Fire Protection Services LLC. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. Powered by JazzHR Z4vuNI6pSm

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. At Kelso Building Services, we believe in empowering our team members with the tools, training, and support they need to succeed. You'll be part of a company that values integrity, innovation, and customer satisfaction—and you'll have the opportunity to grow your career in a dynamic and rewarding environment. What You'll Do • Minimum of 2 years of experience in HVAC sales or a related technical sales field., • Strong understanding of HVAC systems, components, installation processes, and service offerings., • Excellent communication, negotiation, and interpersonal skills—you know how to listen, advise, and close deals., • A self-motivated, goal-oriented mindset with a passion for helping customers and driving results., • Proficiency in CRM software (e.g., Salesforce, HubSpot) and Microsoft Office Suite., • A valid driver's license and reliable transportation for site visits and client meetings., • Competitive base salary, robust commission structure plus performance bonus, • Health, dental, and vision insurance, • Paid time off and holidays Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job Description DIVE IN TO A NEW CAREER WITH LESLIE'S: Founded in 1963, Leslie's is the largest and most trusted direct-to-consumer brand in the U.S. pool and spa care industry. We serve the aftermarket needs of residential and professional consumers with an extensive and largely exclusive assortment of essential pool and spa care products. We operate an integrated ecosystem of 900+ retail locations, backyard service and repair, a robust digital platform, and manufacturing and distribution divisions across 35+ states—enabling consumers to engage with Leslie’s whenever, wherever, and however they prefer to shop. With over 60 years of providing best-in-class products and solutions to our customers, there is nothing that we value more than the development and growth of our team. We strive to create a positive and fun atmosphere where our Team Members feel valued and are enthusiastic about the contributions they make to the success of Leslie's. Job Overview: As a Field Service Technician, you will play a key role in leading exceptional pool service delivery to our customers. You’ll work outdoors at residential and commercial locations, bringing the pool industry to life through hands-on support, including sales, installations, and repairs of pool equipment. All Service Technicians are provided with trucks, uniforms, and comprehensive training to set you up for success. Starting Training Pay: $20.00 / Hourly | Post Training Pay: 40% Commission with Potential Earnings: $60,000–$100,000+ per year Responsibilities: • Perform sales, installation, and repair of swimming pool equipment for residential and commercial customers, • Interact directly with customers to provide service, product recommendations, and general guidance, • Maintain high standards of customer service, professionalism, and ethical conduct, • Comply with all company safety procedures, including safe work practices and driving habits, • Partner with Service Managers to ensure company guidelines, policies, and procedures are met or exceeded, • Install, troubleshoot, and repair gas and electrical pool heaters, • Diagnose and repair motors, filters, timers, pool cleaners, blowers, lighting, automated pool systems, chlorinators, and backwash valves, • Perform PVC, copper, and galvanized plumbing repairs and installations, • Valid driver’s license with a clean motor vehicle record (MVR), • Ability to pass a drug screen and background check, • Working knowledge of general plumbing and/or electrical systems Leslie’s recognizes a critical component to our continued success is our people. Leslie’s is proud to have a culture of inclusion that seeks to celebrate and embrace the different backgrounds and perspectives that help drive our success and support team members in developing and growing with us. We aim to create a workplace where all team members feel welcomed and valued and inspire each other every day. #RetailHiring Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Position Overview We are seeking an experienced HVAC Service Sales Representative to drive growth and profitability in the Atlanta market. This role is responsible for building and maintaining long-term customer relationships, developing retrofit project opportunities, and expanding service agreements. The ideal candidate has strong industry relationships, proven success in mechanical services sales, and the ability to position our team as the provider of choice. Who We Are We are a leading provider of commercial and industrial HVAC, building controls, electrical, and plumbing services, serving a wide range of facilities including distribution centers, industrial plants, universities, airports, healthcare facilities, and more. With nearly 700 employees across multiple states, we are committed to building strong, lasting partnerships with both our customers and employees. We believe when you succeed, we all succeed—which is why we focus equally on employee growth and customer satisfaction. Benefits Overview • Competitive weekly pay, • Comprehensive healthcare (medical, dental, vision, free telehealth & more), • 401(k) retirement plan with 5% company match, • Life insurance, short- and long-term disability, • Paid time off (up to 4 weeks) + 9 paid holidays (+ Veterans Day for veterans), • Career development programs, including industry training and education assistance, • $2,500 referral bonus, • Role-specific perks: company vehicle or allowance, mobile phone, uniforms, and work boot & pants allowance Key Responsibilities • Develop and close retrofit project opportunities within assigned territories, • Leverage existing industry relationships to generate new business and expand accounts, • Maintain and grow an existing book of business with repeat clients, • Collaborate with operations and project teams to ensure customer needs are met from proposal through completion, • Conduct site visits, assessments, and presentations to support sales opportunities, • Stay current on HVAC/mechanical service trends to effectively position offerings, • Present and secure proposals, ensuring smooth project kickoffs and customer onboarding, • Maintain, extend, and support service agreements, creating pull-through opportunities, • Track progress and account status using CRM and reporting tools, • Develop and implement territory marketing plans aligned with company strategy Accountabilities • Ongoing professional development through company-sponsored training to remain at the forefront of industry expertise, • Deliver elite customer service to ensure we remain the trusted partner for HVAC and refrigeration needs Qualifications • 5–7 years of experience selling or working in mechanical services, • Proven success in retrofit project sales, • Strong relationships in industrial and/or medical markets, • Experience selling service and maintenance agreements, • Knowledge of building HVAC systems and service methodologies, • Strong presentation, communication, and relationship-building skills Behavioral & Technical Skills • Strong written and verbal communication abilities, • Solid math skills (rate, ratio, percentage, graphs), • Ability to problem-solve and manage multiple tasks effectively, • Self-motivated with strong organizational skills and attention to detail Work Environment & Physical Demands • Field-based role requiring travel to multiple customer sites daily, • Regular standing, walking, climbing, kneeling, and crawling, • Frequent lifting of up to 25 lbs; occasional lifting up to 50 lbs, • Vision requirements include close, distance, peripheral, depth perception, and ability to adjust focus

Job DescriptionHiring for a Travelling position - $28-40 starting base pay - Travel role with Per Diem - Can start ASAP!!! We are seeking a skilled Commercial Supermarket Refrigeration Installer to join our team. This role focuses on the installation, assembly, and startup of supermarket refrigeration systems, including extensive in‑case copper brazing work. The ideal candidate is detail‑oriented, safety‑focused, and experienced in commercial refrigeration installation environments. Key Responsibilities: • Install commercial supermarket refrigeration systems and components, • Perform compressor installations and refrigerated case installation, • Execute copper pipe fitting and brazing, including in‑case brazing, • Replace defective parts and components as needed, • Assist with refrigerant recovery, replacement, evacuation, and charging, • Perform basic electrical diagnostics and troubleshooting, • Insulate piping and ensure installations meet quality and safety standards, • Utilize test and diagnostic equipment including meters, gauges, reclaim machines, and vacuum pumps, • Follow lockout/tagout and jobsite safety procedures, • Communicate technical information clearly with customers, vendors, and internal teams Additional Job Details: • This role supports new installations and remodels/refurbishments of commercial supermarket refrigeration systems at grocery stores throughout the Midwest and Southeast, • Work is performed in traveling crews of 6–8 technicians, • Project durations typically range from 2 weeks to 18 weeks, • Consistent, year‑round work — technicians generally roll directly from one project to the next with minimal downtime, • Flexibility is built in: when schedules allow, technicians can return home for weekends and may request time off between projects as needed, • Work schedule is 10‑hour night shifts, typically 8:00 PM – 6:00 AM, • Standard work week runs Sunday night through Thursday morning, • Average weekly hours are approximately 45–50 hours If you would like to schedule a call with me when you are available, please CLICK HERE. If you’re interested or know someone who might be, call me at 3143170199. For quick response Job Type & Location This is a Permanent position based out of Atlanta, GA. Pay and Benefits The pay range for this position is $58240.00 - $91000.00/yr. Weekly Pay. Medical, Vision, Dental, Lift, and Supplemental Benefits. Vehicle Allowance. Per Diem. Company books and pays for hotels. Company paid health insurance plan for Employee. 401k w/ match after 1 year of employment. Workplace Type This is a fully onsite position in Atlanta,GA. Application Deadline This position is anticipated to close on May 20, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Great company culture/ Excellent opportunity/ Relocation Assistance This Jobot Job is hosted by: Billy Mewton Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $40 - $45 per hour A bit about us: We are currently seeking an experienced Electrician to join the manufacturing team of one of our esteemed clients. As an Electrician, you will play a critical role in maintaining and troubleshooting electrical systems and equipment to ensure optimal performance and safety within the manufacturing facility. The ideal candidate will have a strong background in industrial electrical systems, excellent problem-solving skills, and a commitment to quality and safety. Why join us? • Health Insurance, • Vision, • Dental, • PTO, • Life Insurance, • 401k + Match, • Short-Term Disability, • Long-Term Disability, • Tuition Reimbursement Job Details Job Details: We are currently seeking a highly skilled and experienced Permanent Electrician to join our dynamic team. This is an exciting opportunity to work on a wide range of electrical systems, including AC, power plants, wiring, and PLC. The ideal candidate will have extensive experience in all these areas, with a proven track record of success in maintaining, troubleshooting, and repairing complex electrical systems. This is a full-time position, offering a competitive salary and benefits package, with opportunities for professional development and advancement. Responsibilities: 1. Install, maintain, and repair electrical control, wiring, and lighting systems., 2. Perform general electrical maintenance on AC systems, power plants, and other related equipment., 3. Inspect transformers and circuit breakers and other electrical components., 4. Troubleshoot electrical issues using appropriate testing devices., 5. Read and interpret electrical and mechanical drawings, schematics, blueprints, and specifications to perform assigned tasks., 6. Repair and replace equipment, electrical wiring, or fixtures., 7. Follow National Electrical Code state and local building regulations., 8. Conduct routine maintenance and testing on commercial and domestic electrical systems., 9. Ensure good quality workmanship which upholds company standards, complies with building codes, and follows safety requirements., 10. Work independently in troubleshooting and providing solutions to unresolved maintenance problems. Qualifications: 1. Proven experience as an electrician., 2. Experience in industrial and/or commercial electrical systems., 3. Demonstrable ability to use electrical and hand tools (e.g. wire strippers, voltmeter etc.) and electrical drawings and blueprints., 4. Thorough knowledge of safety procedures and legal regulations and guidelines., 5. Excellent critical thinking and problem-solving ability., 6. Excellent physical condition and flexibility to work long shifts and overnight., 7. Diploma in relevant vocational training or successfully completed apprenticeship as an electrician., 8. Valid license to practice the profession., 9. Proven experience with AC, power plant systems, wiring, and PLC., 10. Excellent problem-solving and communication skills., 11. Ability to work independently and as part of a team., 12. High level of integrity and professionalism., 13. Must have a minimum of 2+ years of experience in a similar role. This is a fantastic opportunity for an experienced electrician who is looking to take the next step in their career. If you have the necessary skills and experience, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionCompany Description Preferred Apartment Communities combines expertise with a people-first approach, delivering consistent care and communities that feel like home. Our mission is to provide exceptional living experiences for our residents while building a workplace where our associates feel supported, inspired, and prepared to grow. Guided by the belief that we should always be better today than yesterday, we champion continuous improvement across every level of our organization. Through operational excellence, strategic partnerships, and a people-focused approach, we strive to be good neighbors to our residents, to each other, and to the communities we serve. Job Description We are hiring a Maintenance Technician to work onsite at Sirona, our luxury 480-unit apartment community in the heart of Sandy Springs, just north of Atlanta, GA. Responsibilities • Assists in all maintenance requests, preventative maintenance, and amenity area maintenance for the apartment community., • Completes maintenance work orders for residents (service appliances, plumbing, HVAC systems, minor electrical, gate systems, pool operations, etc.)., • Performs preventative maintenance work., • Responds and resolves emergency maintenance requests for after business hours calls (weeknights, weekends, and holidays)., • Prepares vacant apartments to make rent ready., • Keep the maintenance shop clean and organized; maintains adequate stock/inventory of parts for equipment, appliances, etc., • Interacts directly with residents., • Must make Customer Service a priority., • Maintains logbooks and databases; enters service requests and status updates into database., • Assists in monitoring contractors work performance., • Supports the Maintenance Manager in meeting budget responsibilities., • Follows and promotes company policies and procedures., • If the property does not have a housekeeper, light cleaning duties will be required such as cleaning models, club houses, leasing office, emptying trash, cleaning the grounds and amenity areas, etc., • A complete clean and neat uniform must be worn when working on any PAA Property including nights and weekends, if applicable. Personal appearance must be clean and neat at all times, according to PAA policy., • Communicate with residents and prospects in a manner consistent with PAA's standards., • Read and/or listen to resident requests/complaints., • Receive resident complaints in a calm, open and professional manner., • Solve problems quickly, usually within 24 hours, or contact supervisor for immediate assistance., • Deliver newsletters, correspondence, etc. to residents' apartment., • Coordinate, set up, attend, and clean up after resident functions (food, tables, display areas, etc.) as requested by the Community Manager.Qualifications Requirements • 1-3 years maintenance experience (apartment maintenance experience preferred), • Troubleshooting and problem-solving skills., • Budget or basic business finance helpful., • Refrigeration certification (type 2 or universal) or obtain in the first 90 days of employment., • Must be able to use various hand tools and test equipment., • Must be able to bend, stoop, and kneel for extended periods of time., • Must be able to push and pull up to 300 pounds on wheels., • Must be able to lift up to 50 pounds., • Must be able to climb ladders of up to 40 feet in height., • As part of your daily maintenance routine, you may be required to move appliances from one apartment unit to another apartment unit on opposite ends of the property. The appliance may have to be transferred by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to well over 300 pounds., • Commercial laundry rooms are equipped with single washing machines and/or stacked (double) clothes dryers which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 300 pounds., • On occasion, you may be involved in repairs to the building structure. You may be required to move or transport several different building type materials weighing several pounds to over 300 pounds., • At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All functions require different physical exertion, and their weight depends on the equipment (usually in excess of 100 pounds)., • You will be required to perform certain resident service functions or make upgrades to the apartment home. An example would be to install lighting or ceiling fans. Both duties would require the work to be done using a step ladder while lifting. Additional Information What We Offer • Generous PTO program, • 13 paid holidays plus 3 floating holidays and paid volunteer day, • Comprehensive, affordable medical coverage as well as company-paid dental and vision coverage available to all full-time, regular associates, • 401k with exceptional employer match, • Associate Apartment Discount, • Educational Assistance Program (tuition and certifications) Review our privacy policy here: Preferred Apartment Communities is proud to be a US EPA ENERGY STAR® Partner.

Job DescriptionCompany Description Preferred Apartment Communities combines expertise with a people-first approach, delivering consistent care and communities that feel like home. Our mission is to provide exceptional living experiences for our residents while building a workplace where our associates feel supported, inspired, and prepared to grow. Guided by the belief that we should always be better today than yesterday, we champion continuous improvement across every level of our organization. Through operational excellence, strategic partnerships, and a people-focused approach, we strive to be good neighbors to our residents, to each other, and to the communities we serve. Job Description This position will be shared between two of our properties in Atlanta, Georgia. Responsibilities: Assist in all maintenance requests, preventative maintenance, and amenity area maintenance for the apartment community. Completes maintenance work orders for residents (service appliances, plumbing, HVAC systems, minor electrical, gate systems, pool operations, etc.). Responds and resolves emergency maintenance requests for after business hours calls (weeknights, weekends, and holidays). Prepares vacant apartments to make rent ready. Performs preventative maintenance work. Keep the maintenance shop clean and organized; maintains adequate stock/inventory of parts for equipment, appliances, etc. Interacts directly with residents. Maintains logbooks and databases; enters service requests and status updates into database. Assists in monitoring contractors work performance. Supports the Maintenance Manager in meeting budget responsibilities. Follows and promotes company policies and procedures. Must make Customer Service a priority. If the property does not have a housekeeper, Apartment Maintenance Technician light cleaning duties will be required such as cleaning models, club houses, leasing office, emptying trash, cleaning the grounds and amenity areas, etc. Maintain (clean, orderly, and in working conditions) all amenity areas (pool, compactors, weight rooms, parking decks, etc.) Customer Service Responsibilities A complete clean and neat uniform must be worn when working on any PAA Property including nights and weekends, if applicable. Personal appearance must be clean and neat at all times, according to PAA policy. Communicate with residents and prospects in a manner consistent with PAA's standards. Read and/or listen to resident requests/complaints. Receive resident complaints in a calm, open and professional manner. Solve problems quickly, usually within 24 hours, or contact supervisor for immediate assistance. Deliver newsletters, correspondence, etc. to residents' apartment. Coordinate, set up, attend, and clean up after resident functions (food, tables, display areas, etc.) as requested by the Community Manager. Qualifications Requirements: 1-3 years maintenance experience (apartment maintenance experience preferred) Troubleshooting and problem-solving skills. Budget or basic business finance helpful. Refrigeration certification (type 2 or universal) or obtain in the first 90 days of employment. Valid driver's license (free from major moving violations) and dependable transportation. Physical Requirements: Must be able to use various hand tools and test equipment. Must be able to bend, stoop, and kneel for extended periods of time. Must be able to push and pull up to 300 pounds on wheels. Must be able to lift up to 50 pounds. Must be able to climb ladders of up to 40 feet in height. Must be able to use a hand-truck. Special Physical Requirements As part of your daily maintenance routine, you may be required to move appliances from one apartment unit to another apartment unit on opposite ends of the property. The appliance may have to be transferred by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to well over 300 pounds. Commercial laundry rooms are equipped with single washing machines and/or stacked (double) clothes dryers which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 300 pounds. On occasion, you may be involved in repairs to the building structure. You may be required to move or transport several different building type materials weighing several pounds to over 300 pounds. At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All functions require different physical exertion, and their weight depends on the equipment (usually in excess of 100 pounds). You will be required to perform certain resident service functions or make upgrades to the apartment home. An example would be to install lighting or ceiling fans. Both duties would require the work to be done using a step ladder while lifting. Additional Information What We Offer: • Expected pay range of $24.00/hour-$26.00/hour. You will be provided a pay rate that is in line with your skills and experience as they relate to the requirements of the job, • Generous PTO program, • 13 paid holidays plus 3 floating holidays and paid volunteer day, • Comprehensive, affordable medical coverage as well as company-paid dental and vision coverage available to all full-time, regular associates, • 401k with exceptional employer match, • Associate Apartment Discount, • Educational Assistance Program (tuition and certifications) Review our privacy policy here: Preferred Apartment Communities is proud to be a US EPA ENERGY STAR® Partner.

Job Description ABOUT THE COMPANY Our founders, food industry veterans Mike and Tisha, knew that food wasn't what it used to be. They wanted to make it better—by creating a new kind of farm. A farm that can grow up to 300 times more food than an open-field farm on a smaller footprint, without use of herbicides, pesticides, or other chemicals that you don’t want in your food. A farm powered with 100% renewable energy, growing with 95% less water and delivering food within 48 hours, for longer freshness for our customers and less food waste. 80 Acres Farms is a vertical farming leader, operating commercial farms in Ohio, Kentucky, and soon Georgia in addition to research and development farms in Arkansas and The Hague, Netherlands. All farms utilize state-of-the-art technology and analytics developed by the company's subsidiary, Infinite Acres. 80 Acres Farms-branded salads, microgreens, herbs, and tomatoes are available at retailers and food service distributors from Michigan to Florida, including Kroger, Whole Foods, The Fresh Market, Dorothy Lane Markets, Sysco, and US Foods. 80 Acres Farms is supported by world-class investors and partners, including General Atlantic, Siemens, Barclays, Ocado, and Signify Philips. If you're interested in making a difference, join our team and help us change how the world eats. POSITION OVERVIEW We are looking for a highly skilled, dedicated, Industrial Maintenance Technician to join and lead our maintenance team in the growing future of indoor farming! The ideal candidate is a self-motivated, team player with great people and collaboration skills, who promotes a team atmosphere, applies root cause analysis principles, and supports process improvements in our fast paced always growing culture. Key responsibilities and duties: • Advanced troubleshooting of mechanical systems and sub-systems, • Advanced electrical troubleshooting of equipment, • Perform preventative maintenance tasks, • Ownership of a functional process area, • Some mentoring and training of less experienced maintenance staff, • Follow all safety and food safety requirements, PPE, LOTO, while culturing a safe work environment, • Provide feedback to Planner on preventative maintenance tasks and schedules, • Perform daily facility walkthroughs and inspections, • Utilize CMMS to open/close workorders, schedule PM’s, create workorders, etc., to meet workflow and compliance KPI’s, • On call availability for off hour critical failures, • Develop and maintain good working relationships with everyone in the organization, • Maintain tools, supplies, and clean organized work areas, • 4+ years of industrial maintenance experience preferred, • Proficiency with electrical: reading schematics, utilizing volt/ohm meter, etc. (120, 240, 480VAC, 24VDC), • Some HVAC/Hydronic experience preferred, • Ability to understand and troubleshoot control components, inputs/outputs, PLC’s, HMI’s, pumps, motors, plumbing, heat exchangers, photoeyes, servo drives, proximity sensors, VFD’s, flow control, timers, etc., • Safe operation of warehouse equipment such as scissor and fork lifts, • Personal Protective Equipment, LOTO, confined space, arc flash, and safety compliance, • Ability to regularly lift, bend, stretch, crawl, utilize manual dexterity, navigate ladders/catwalks, stand and/or walk for long periods of time without limitation, • Lift 75lbs unassisted, • Follow all company policies, procedures, safety, and food safety guidelines, • Flexible working hours, willing to work scheduled, unscheduled, and on call overtime Specialized knowledge, skills and abilities: • Deep knowledge of some mechanical and/or electrical systems, • Strong problem-solving skills, • Proficiency with electrical: reading schematics, utilizing volt/ohm meter, etc. (120, 240, 480VAC, 24VDC), • Some HVAC/Hydronic experience preferred (certifications a plus), • Welding preferred: mig, tig, stick, aluminum, stainless steel, • Water & filtration systems, pumps, plumbing, etc., • Preventative and Predictive maintenance to maximize uptime BENEFITS WE OFFER YOU • Health, dental, and vision insurance starting day one of employment, • Minimum two weeks paid vacation, • One week paid health & wellness time, • 10 paid holidays, • Parental leave, • 401k with up to 4% Company match, • Company-paid life insurance, • Short and long-term disability insurance ABOUT OUR HIRING PRACTICES Statistics show that underrepresented communities don’t apply for a job unless they meet 100% of the qualifications. Don’t worry if you think you can’t check every box on the list; we’ll provide all the on-the-job training you need. 80 Acres Farms is an equal opportunity employer. You’re defined by more than just your job title, and we want you to feel comfortable bringing your true self to work. We value your talents, your traditions, your take on the world, and everything else that makes you unique. We strive to be to be a place where a diverse mix of talented people want to come, to stay, and to do their best work. 80 Acres Farms participates in E-Verify. As required by law, your employment with the Company is contingent upon you providing legal proof of your identity and authorization to work in the United States. Employment decisions are made without regard to protected characteristics. All candidates will be given the same consideration.

Job Description Top Tech Mechanical Services, Inc. is searching for a full-time HVAC Installer to join our growing team in Atlanta, GA. If you're looking for a full-time, year-round career with pay in the range of $60,000 – $90,000/year (depending on experience), and a comprehensive benefits package including: • Health insurance, • Dental, • 401(k) matching, • Paid time off (PTO), • Company uniforms, • Advancement opportunities LEAD HVAC INSTALLER SCHEDULE As an HVAC Installer, your workday will begin by dispatching directly from your home to job sites across the Atlanta metro area. Shifts will vary but always fall within standard business hours: 7 am - 4 pm, 8 am - 5 pm, or 9 am - 5 pm, Monday through Friday. You'll enjoy the consistency of year-round work and a supportive team environment. YOUR DAY In this Lead HVAC Installer role, you will spend your days installing residential and light commercial HVAC systems-such as gas furnaces, air conditioners, heat pumps, ductless mini-split systems, RTUs, and package units-across the Atlanta area. You will manage installation projects from start to finish, ensuring every detail meets manufacturer specifications, local codes, and our own high company standards. You'll be responsible for installing and modifying ductwork, refrigerant lines, gas piping, electrical connections, and venting systems, all while maintaining a clean, professional job site and respecting each customer's home. You will also keep accurate documentation of your work and collaborate closely with the installation and service team to deliver the exceptional customer experience we are known for. WHAT WE NEED FROM YOU • Experience working with gas furnaces, air conditioners, heat pumps, mini-splits, and RTUs, • Strong understanding of heating and cooling system installation practices, • Ability to complete full system replacements and installations, • Strong attention to detail and craftsmanship, • Professional attitude and strong work ethic, • Valid driver's license and a clean driving record, • 5+ years of residential HVAC installation experience (preferred) OUR STORY Top Tech is a premier HVAC company specializing in commercial and residential heating and air conditioning services, founded by Kevin Newman, who began working in the trade at age 15 and built the business on a commitment to top‑quality, transparent craftsmanship customers can trust. Fully licensed and insured, the company provides reputable repair and installation services delivered by experienced technicians. As a family‑owned business, Top Tech treats every employee like part of the family and is dedicated to fostering a diverse, supportive work environment where staff feel valued. The team's hard work is recognized through competitive wages, benefits, and meaningful perks that reflect the company's appreciation for its employees. WE CAN'T WAIT TO HEAR FROM YOU Apply to be our new Lead HVAC Installer. Our mobile-friendly application is quick and easy! Must have the ability to pass a background check and drug screening test.

Job Description COME JOIN OUR TEAM! Titan Corp seeks maintenance technicians for growing property management company. Benefits include: Medical, Dental, Vision, 401K, and Paid Time off. The role of Maintenance Technician is to provide proper maintenance for the community, along with providing excellent customer service to all residents and prospects. Maintenance Technicians must wear complete uniform with I.D. badge when working on any Titan Corp. property at all times, including nights and weekends. Essential Duties include the following (other duties may be assigned): 1. Complete all service requests within 24 hours, unless it requires extraordinary parts or labor., 2. Keep maintenance shop in a clean and orderly manner., 3. Monitor and operate compactor., 4. Help maintain grounds and streets free of litter., 5. Keep uniform and personal appearance clean and neat., 6. Maintain all amenity areas., 7. Assist Community Director with unusual projects as necessary to maintain smooth property operation., 8. Maintain all project directional signs, making sure they are clean, painted, and straight., 9. Monitor recycling containers. Keep them clean and items separated., 10. Call Community Director or Maintenance Supervisor before you are going to be out of work for any reason., 11. Monitor guidelines for vacant, office, and common areas., 12. Responsible for checking and replacing any defective or burned out light bulbs or security lights. Light inspections to be done one or two times per week., 13. Serve maintenance "on call" as necessary., 14. Perform other duties as assigned by the Community Director and/or Maintenance Supervisor. While performing the above responsibilities and assignments, you may be required to perform tasks that will require a great amount of physical exertion. Listed below are common requirements for your duties as Maintenance Technician for Titan: · Use various hand tools and test equipment; these items may vary in weight from a few ounces to 40 pounds. · Use a 30-pound can of refrigerant for servicing of air-conditioners. · Hand-carry and use a 70-pound refrigerant recovery unit. · Hand-carry and install air-conditioning compressors weighing from 40 pounds to 120 pounds, depending upon the size of the condensing unit · Hand-carry and install air-conditioning condenser units weighing 100 to 250 pounds. · Hand-carry and install furnace / forced air unit weighing up to 90 pounds. · Hand-carry and install hot water heaters weighing between 70 and 90 pounds. · Hand-carry and install commode/closet combination weighing 40 to 50 pounds. · You will be required to climb ladders in order to clean leaves out of gutters and do roof repairs. Ladders required to perform this task will range from 16 to 40 feet in length and range in weight from 20 to 125 pounds. You will be required to lift and transport these ladders. · Make sure preventative maintenance is done on all weight room equipment. · Use of a ladder is required to change light bulbs in breezeways and on buildings. These ladders could range in weight from 10 to 125 pounds. · Changing panels of glass ranging in weight from 10 to 40 pounds is require and may require the use of a ladder to accomplish the task. · Pool maintenance is a big responsibility and often requires you to lift and / or transport 100-pound drums of granular chlorine, 50-pound drums of stick chlorine, and 50-pound bags of soda ash or bicarbonate of soda. You are responsible for replacing pool pump room motors and pumps. These pumps and motors could range from 25 to 200 pounds, depending on the size required. · As part of your daily maintenance routine, you may be required to move appliances from one apartment to another apartment on opposite ends of the community. The appliance may have to be transported by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to over 200 pounds. · Our commercial laundry rooms are equipped with single washing machines and / or stacked (double) clothes dryers, which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 150 pounds. · On occasion, you will be required to move furniture from one model unit to another or move furniture items in a resident's apartment to accomplish certain repairs or to correct flood damage. This would require that you move items weighing several pounds to several hundred pounds. · During the course of your job, you may be involved in repairs to the building structure. You may be required to move or transport a number of different building type materials weighing several pounds to several hundred pounds · At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All of these functions require different physical exertion and their weight depends on the particular equipment (usually in excess of 100 pounds) · You will be required to perform certain resident service functions or make upgrades to the apartment. An example would be to install track lighting or ceiling fans. Both duties would require the work to be done using a stepladder and require lifting with two hands. In addition to the above, you will be required to lift and transport other items pertaining to maintenance (weighing up to 200 pounds) for the smooth operation of the property. Customer Service Responsibilities: · Communicate clearly to the residents, both verbally and in writing. · Read and / or listen to resident requests / concerns. · Receive resident concerns in a calm and open manner. Qualifications: Special Skills Required . Must be CMRT (Certified Maintenance and Reliability Technician) certified. Must be EPA (Environmental Protection Agency) certified. Must be CPO (Certified Pool Operator) certified. · Must have a sense of pride about a job well done, be courteous and tactful, and have a commitment to quality work. · Must be clean cut, neatly dressed, and wear the proper uniform each day. · Must have good character and background that can stand up under a thorough background check. · Must take and pass a drug-screening test. Must be able to pass an agility test. · Must be able to communicate to residents, both verbally and in writing, and receive residents' concerns in a calm and open manner. · Must have dependable transportation capable of carrying tools and parts to ensure an efficient use of time to provide proper building maintenance. · Must have a valid driver’s license. Knowledge · General property operations: · Safety · Heating and A/C · Plumbing · Pool Care · Electrical · Carpentry · Appliance / Equipment Repair · Wallpaper / Painting

Job Description As a Service Technician you must be organized, an effective communicator (both written & oral), and qualified to provide services in calibration/instrumentation and preventative maintenance. This role may be under the tutelage of our Training & Technical Manager for advancement and work with cross-functional internal teams. Location: Primary service area would be within Atlanta, GA. Responsibilities may include the following and other duties may be assigned: Support service operations by providing calibration and/or preventive maintenance of general laboratory and process equipment. Repair of HEPA filtered devices, including Biological Safety Cabinets, Clean Benches, Chemical Fume Hoods and Cleanrooms. Additional services are to be provided as trained for, including but not limited to: Decontamination, Laboratory Equipment Repair and Calibration, Balance and Scale Calibration. Qualifications/Requirements: Minimum high school diploma or GED. NSF or CETA or NEBB Qualification (Preferred) Technical College graduates and PMEL are preferred. Maintain a valid driver’s license with good driving record. Computer literate Proficient in all Microsoft Office suites. Understand and follow written and verbal instructions. Familiar with ASQ, NSF Ansi 49, or CETA RCCP Adept in electronics & electrical. Company DescriptionZenopa is a service organisation that provides flexible, rapid and effective recruitment solutions to our clients. We specialise in the commercial side of the healthcare industry, and recruit for various markets including, Pharmaceutical, Medical, Scientific, Animal Health, Dental, Engineering, Consumer Health, and Medical Communications. Zenopa has an excellent reputation spanning over 25 years, being awarded 'Great Place to Work' four years in a row, and is one of the leading recruitment agencies. Based in High Wycombe, Buckinghamshire and Charlotte, NC the company has demonstrated fantastic growth over the past 10 years.Zenopa is a service organisation that provides flexible, rapid and effective recruitment solutions to our clients. We specialise in the commercial side of the healthcare industry, and recruit for various markets including, Pharmaceutical, Medical, Scientific, Animal Health, Dental, Engineering, Consumer Health, and Medical Communications. Zenopa has an excellent reputation spanning over 25 years, being awarded 'Great Place to Work' four years in a row, and is one of the leading recruitment agencies. Based in High Wycombe, Buckinghamshire and Charlotte, NC the company has demonstrated fantastic growth over the past 10 years.

Job DescriptionDescription: Job Summary: Performs general maintenance repairs on electrical, plumbing, doors, locks, flooring, lights, ceilings, walls, woodwork, landscaping, fire systems, and alarm systems. Ensures all areas of the Peachtree Road United Methodist Church's campus (400,000 sq. ft.) are in like-new condition. Responsibilities: • Troubleshoot and repair lighting systems for proper operation; replace fluorescent tubes, defective ballasts, and incandescent bulbs., • Troubleshoot and program lighting systems., • Install and repair all exit signs and emergency lights to ensure proper operation., • Install 120/208 volt electrical branch circuits., • Install and repair low-voltage circuits.[e.g., landscape lighting, HVAC control circuits, CCTV, intercom systems, alarm circuits], • Install data cabling and terminate cable ends., • Check all bathroom plumbing systems for proper operation. Repair/replace as needed., • Check all kitchen plumbing systems and fixtures. Repair/replace as needed., • Check the heating system. Make sure grills and filters are clean., • Check the church building structure for any defects and repair immediately if minor work is needed. Otherwise, report issues promptly to the Facility Manager., • Pick up trash on the grounds daily., • Ensure parking lots are free of junk, trash and garbage., • Ensure proper care in the use and maintenance of equipment and supplies., • Promotes continuous improvement in workplace safety and safe environmental practice., • Event set-ups as needed. This includes moving furniture., • Performs miscellaneous job-related duties as assigned. Knowledge, Skills and Abilities: • Demonstrated skill in general maintenance, carpentry work, plumbing, electrical and landscaping., • Basic tools for use in carpentry, electricity, plumbing, and landscaping., • Ability to collaborate and coordinate with church volunteers on special maintenance projects., • Ability to read, understand, follow, and enforce safety procedures., • Understands and performs in a preventative maintenance setting., • Can navigate and update a work order system., • Ability to read, understand, follow, and enforce safety procedures., • Strong interpersonal skills., • Strong written and verbal communication skills. Bilingual a plus., • Attention to detail and a hospitality mindset., • Able to lift up to 50 lbs. and climb high ladders. Must be safety cautious at all times., • Work on a ladder, lift, scaffolding or boom. Qualifications: • High school diploma or GED, • One to three years as a full-time maintenance technician in a commercial or large campus setting. Working Conditions and Physical Effort: • Work involves exposure to unusual elements, such as above-average temperatures, chemicals, biohazardous materials, dirt, dust, fumes, smoke, and/or loud noises., • Considerable physical activity. Requires heavy physical work, including heavy lifting, pushing, or pulling objects weighing up to 50 pounds. Physical work is a primary part of the job., • The work environment involves exposure to potentially hazardous materials and situations that require following extensive safety precautions, including the use of protective equipment and MSDS. Full-time, 40 hours a week, Monday – Friday 9:00AM – 5:00PM. May be required to work evenings or weekends as projects require. Requirements:

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact Pearce is seeking Experienced Controlled Environment Vault (CEV) HVAC Technicians to join our team for servicing and repairing commercial HVAC equipment. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside in the Atlanta, Georgia area. Core Responsibilities • Perform work on underground Controlled Environment Vaults (CEVs)., • Service forced-air heating systems, air conditioning units, hydronic heating systems, refrigeration equipment, and complete HVAC systems., • Troubleshoot, repair, and maintain HVAC equipment and all related mechanical and electrical components., • Perform preventative maintenance and operational testing on HVAC and electrical systems., • Test electrical circuits and components for continuity using appropriate electrical test equipment., • Layout, connect, and verify electrical wiring between controls and equipment in accordance with wiring diagrams., • Troubleshoot low-voltage control systems and read/interpret electrical ladder schematics., • Demonstrate working knowledge of underground gas monitoring systems (including Sierra 2400, Sierra 2450, and Quest control systems). Core Experience • Must be Level 2 or Universal EPA Certified (Required)., • 2+ years of experience of demonstrated competency of HVAC comfort systems, including professional-level diagnostics and service., • Possess strong working knowledge of pumps, dry coolers, and cooling towers., • Complete all required safety and technical training., • Follow all safety practices and quality standards as outlined in company safety manuals and project documentation At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside in the Atlanta, Georgia area., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds). At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$38 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. HIRING BONUS! $1,500 WITH VERIFIABLE INDUSTRY EXPERIENCE IN COMMERCIAL DOOR OR ENTRY DOOR SYSTEMS! Overhead Door Company of Atlanta™, a DH Pace Company, Inc., is seeking Commercial Door Service Technicians that want a career not just a job! Upon completion of training, you will be rewarded with your own company work vehicle! Job seekers with a background in construction labor, electrical work, fabrication, carpentry, installing and servicing products, and mechanic experiences typically do well in this job. Job Responsibilities: • Work independently to install repair a wide range of commercial doors and operating systems., • You will successfully identify opportunities to provide customers with products and services., • Employees will be responsible for tracking and maintaining job related paperwork and submitting in a timely manner., • Install quality products and provide professional services for homeowners and homebuilders., • 1-3 years in a construction related industry., • 1-3 years of welding and/or electrical experience preferred, not required., • Must have excellent communication and organizational skills., • Good Mechanical aptitude. Our benefit offerings include: • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job DescriptionDescription: Commercial HVAC Maintenance Technician Atlanta, GA Facilities Maintenance Description Job Summary: Performs routine repairs and maintenance on medium-sized commercial heating, ventilating, and air conditioning (HVAC) systems, including air distribution machinery, pneumatic and digital controls, hot and chilled water distribution, and variable volume systems. Controls and maintains the building automation system. Performs other maintenance repairs, when needed, on electrical, plumbing, doors, locks, flooring, lights, ceilings, walls, woodwork, landscaping, fire systems, and alarm systems. Ensures all areas of the 400,000-square-foot Peachtree Road United Methodist church campus are in like-new condition. Responsibilities: • Leads preventive maintenance, adjustments, and basic repairs on both pneumatically controlled and digitally controlled commercial HVAC systems., • Performs seasonal PM and transitions of systems between heating and cooling., • Participates in HVAC component replacement (belts, sensors, motors, etc.) and evaluation of complex system problems under the leadership of the Facilities Manager., • Performs building system repairs in coordination with others, such as contractors and vendors., • Ensures proper care in the use and maintenance of equipment and supplies., • Light general maintenance, including basic electrical, plumbing, and carpentry., • Promotes continuous improvement of workplace safety and safe environmental practices, • Event set-ups as needed., • HVAC installation (thermostats, ductwork), troubleshooting, repair (pressure sensors, VFDs, piping), and preventative and predictive maintenance., • Use of hand and power tools applicable to the trade., • Repair systems controlled by a central building automation system., • Maintenance and repair procedures for pneumatic and digitally controlled HVAC systems featuring programmable logic controls., • Ability to read, understand, follow, and enforce safety procedures., • Strong interpersonal skills., • Strong written and verbal communication skills. Bilingual a plus., • Attention to detail and a hospitality mindset., • Can lift 50 lbs., • High school diploma or GED, • At least 3 years of experience directly related to the duties and responsibilities specified above in a medium-sized or larger commercial building., • Work involves exposure to unusual elements, such as extreme temperatures, toxic chemicals, biohazardous materials, dirt, dust, fumes, smoke, and/or loud noises., • Considerable physical activity. Requires heavy physical work; heavy lifting, pushing, or pulling objects up to 50 pounds. Physical work is a primary part of the job., • Work environment involves exposure to potentially dangerous materials and situations that require following extensive safety precautions, including the use of protective equipment and MSDS.

Job DescriptionCompany Description Preferred Apartment Communities combines expertise with a people-first approach, delivering consistent care and communities that feel like home. Our mission is to provide exceptional living experiences for our residents while building a workplace where our associates feel supported, inspired, and prepared to grow. Guided by the belief that we should always be better today than yesterday, we champion continuous improvement across every level of our organization. Through operational excellence, strategic partnerships, and a people-focused approach, we strive to be good neighbors to our residents, to each other, and to the communities we serve. Job Description Responsibilities: Assist in all maintenance requests, preventative maintenance, and amenity area maintenance for the apartment community. Completes maintenance work orders for residents (service appliances, plumbing, HVAC systems, minor electrical, gate systems, pool operations, etc.). Responds and resolves emergency maintenance requests for after business hours calls (weeknights, weekends, and holidays). Prepares vacant apartments to make rent ready. Performs preventative maintenance work. Keep the maintenance shop clean and organized; maintains adequate stock/inventory of parts for equipment, appliances, etc. Interacts directly with residents. Maintains logbooks and databases; enters service requests and status updates into database. Assists in monitoring contractors work performance. Supports the Maintenance Manager in meeting budget responsibilities. Follows and promotes company policies and procedures. Must make Customer Service a priority. If the property does not have a housekeeper, Apartment Maintenance Technician light cleaning duties will be required such as cleaning models, club houses, leasing office, emptying trash, cleaning the grounds and amenity areas, etc. Maintain (clean, orderly, and in working conditions) all amenity areas (pool, compactors, weight rooms, parking decks, etc.) Customer Service Responsibilities A complete clean and neat uniform must be worn when working on any PAA Property including nights and weekends, if applicable. Personal appearance must be clean and neat at all times, according to PAA policy. Communicate with residents and prospects in a manner consistent with PAA's standards. Read and/or listen to resident requests/complaints. Receive resident complaints in a calm, open and professional manner. Solve problems quickly, usually within 24 hours, or contact supervisor for immediate assistance. Deliver newsletters, correspondence, etc. to residents' apartment. Coordinate, set up, attend, and clean up after resident functions (food, tables, display areas, etc.) as requested by the Community Manager. #PIQ Qualifications Requirements: 1-3 years maintenance experience (apartment maintenance experience preferred) Troubleshooting and problem-solving skills. Budget or basic business finance helpful. Refrigeration certification (type 2 or universal) or obtain in the first 90 days of employment. Valid driver's license (free from major moving violations) and dependable transportation. Physical Requirements: Must be able to use various hand tools and test equipment. Must be able to bend, stoop, and kneel for extended periods of time. Must be able to push and pull up to 300 pounds on wheels. Must be able to lift up to 50 pounds. Must be able to climb ladders of up to 40 feet in height. Must be able to use a hand-truck. Special Physical Requirements As part of your daily maintenance routine, you may be required to move appliances from one apartment unit to another apartment unit on opposite ends of the property. The appliance may have to be transferred by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to well over 300 pounds. Commercial laundry rooms are equipped with single washing machines and/or stacked (double) clothes dryers which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 300 pounds. On occasion, you may be involved in repairs to the building structure. You may be required to move or transport several different building type materials weighing several pounds to over 300 pounds. At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All functions require different physical exertion, and their weight depends on the equipment (usually in excess of 100 pounds). You will be required to perform certain resident service functions or make upgrades to the apartment home. An example would be to install lighting or ceiling fans. Both duties would require the work to be done using a step ladder while lifting. Additional Information What We Offer: • Expected pay of $26.00/hour. You will be provided a pay rate that is in line with your skills and experience as they relate to the requirements of the job, • Generous PTO program, • 13 paid holidays plus 3 floating holidays and paid volunteer day, • Comprehensive, affordable medical coverage as well as company-paid dental and vision coverage available to all full-time, regular associates, • 401k with exceptional employer match, • Associate Apartment Discount, • Educational Assistance Program (tuition and certifications) Review our privacy policy here: Preferred Apartment Communities is proud to be a US EPA ENERGY STAR® Partner.

Job Description Commercial HVAC Service Technician Who We Are For almost 20 years, Advanced Commercial has served the Atlanta Metro and the Southeast USA as a trusted Commercial Refrigeration, HVAC, Electrical, and Appliances Contractor. Our customers are the premier brands in the food, beverage, and biomedical industries, and they count on us as their one-call solution for keeping their facilities, plants, and equipment up-and-running 24/7. Repairs, remodeling, or new construction: we do it all. See more here. Job Description We are seeking a skilled Commercial HVAC Service Technician with experience repairing Commercial HVAC systems and repairing HVAC equipment in Supermarket facilities a plus. Work is in the Atlanta Metro area. Why You Will Love This Job Simply put, we have a great reputation in Georgia, and we continue to hire only the best technicians. You will have the personal autonomy to do your job as well as the support of our entire team when you need it. Our management team will give you direct answers and the flexibility to get results. We listen to our techs’ concerns, and your good work will not go unnoticed. Responsibilities • Servicing, troubleshooting, and repairing various commercial HVAC systems, • Performing routine preventive maintenance on HVAC equipment, • Keeping detailed records of all work performed, • Ensuring customer satisfaction by resolving all issues promptly ▪ Experience: Minimum of 3 - 5 years of experience in repairing HVAC systems with 5 to 30 -ton packaged air conditioning/heating units. ▪ Munters/Seasons 4 experience preferred but not required ▪ Some ductless mini-split air conditioning configurations ▪ Supermarket HVAC experience would be a huge plus! ▪ Authorization to work in the United States ▪ EPA certification for refrigerant handling class I & II or Universal ▪ Mechanically competent, with some refrigeration controller programming experience ▪ Can read and understand wiring diagrams. ▪ Excellent customer service skills and professionalism ▪ Physical ability to lift and carry heavy equipment ▪ Valid driver's license and a clean driving record ▪ High standard of integrity and reliability ▪ Flexibility to work irregular hours, including evenings, weekends, and on-call rotation What You’ll Get From Us ▪ Competitive salary – negotiable based on candidate experience and ability ▪ Top Benefits – Medical, Dental, Vision, and Prescription insurance coverage ▪ Retirement Fund Company Match ▪ Paid Vacation and Holidays ▪ Disability and Life Insurance ▪ Company vehicle ▪ Company cell phone & access to the latest technology ▪ Opportunity to work for a recognized leader in our industry ▪ Opportunity for advancement with proven candidate ability and work ethic ▪ Job stability and positive work environment ▪ Paid Training What’s Next Let’s get you onboard. We can’t wait to meet you! Powered by JazzHR VXANHlbHxg

Job Description Overview At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: Competitive pay $35-50/hour DOE and sign-on bonuses up to $3,000 (per location)., • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match, • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing. Responsibilities Refrigeration Start-up Technicians are responsible for start-up of supermarket refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time as well as assist with Energy Optimization (EO) projects. The ideal candidate should know advanced solid-state controls; oil systems safety controls; mechanical sub-cooling; introduction to head pressure controls for energy reduction; introduction to energy management systems (EMS); refrigeration rack oil systems; advanced de-frost diagnosis; and single and parallel compressor system start-up in a supermarket environment. Technicians must carry the skillset of a Journeyman level which includes construction experience in performing installation of refrigeration systems including electrical, plumbing, and fixtures. The technician will function as the subject matter expert for processes, procedures, and projects. • Performs evacuations of parallel racks after verifying pressure tests., • Performs all EMS wiring and programming for all manufacturers of EMS systems., • Performs full start-up of new parallel refrigeration systems and individual systems., • Lead small projects such as single case and condenser changeouts., • Assists with EO projects which would include retro-commissioning of supermarkets for system performance or utility programs, EMS upgrades, leak detection upgrades, and gas conversion projects., • Works with local branch Service and Construction Managers between projects to assist in problematic stores, training for junior technicians and foremen, or other areas as needed., • Perform other duties as assigned. Qualifications • High school diploma or GED., • Coursework at an accredited vocational-technical or trade school., • 3+ years of supermarket EMS systems., • EMS Certification preferred., • Experience and proficient knowledge of supermarket refrigeration., • EPA I and II Certification required., • Valid Driver’s License is required at all times., • Good driving record., • Solid working knowledge of the use of the Microsoft suite of applications (Word, Excel, etc.), • Expert knowledge of refrigeration, ice machines, and electrical systems., • Expert knowledge of single systems, parallel racks systems, display cases, and walk-ins., • Ability to efficiently troubleshoot commercial and supermarket refrigeration equipment., • Expert knowledge of EMS systems in supermarket applications for wiring and programming (CPC, Novar, Danfoss), • Strong mechanical aptitude., • Good communication skills and the ability to build strong relationships with the customers, management, crew, and team., • Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing., • Ability to multi-task effectively., • Travel, overnight, and overtime work as needed., • Ability to organize and prioritize your work schedule and the work schedules of others on a short-term basis

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. At Kelso Building Services, we believe in empowering our team members with the tools, training, and support they need to succeed. You'll be part of a company that values integrity, innovation, and customer satisfaction—and you'll have the opportunity to grow your career in a dynamic and rewarding environment. About This Role We are seeking a skilled and motivated Building Automation Systems (BAS) Installer to join our growing Controls and Automation team. The BAS Installer will be responsible for the installation, wiring, mounting, and commissioning support of building automation and control systems for commercial, institutional, and industrial facilities. This position requires attention to detail, strong knowledge of electrical and mechanical systems, and the ability to work collaboratively with project teams to deliver high-quality installations that meet design specifications and performance standards. Key Responsibilities: • Install controllers, sensors, actuators, relays, network wiring, and panels per engineered drawings and wiring diagrams., • Terminate control wiring, test continuity, and verify system functionality., • Support start-up and commissioning activities in coordination with programmers and project engineers., • Label, document, and organize all field wiring and components for future serviceability., • Ensure installations meet NEC, local electrical codes, and company standards., • Assist in the layout and mounting of control panels, enclosures, and field devices., • Work collaboratively with HVAC, electrical, and mechanical trades to ensure smooth integration., • Maintain accurate records of materials, hours, and project changes., • Adhere to all safety procedures, PPE requirements, and company policies., • Minimum 1–5 years of experience in BAS, electrical, or HVAC controls installation., • Working knowledge of low-voltage wiring, control diagrams, and field device installation., • Familiarity with BACnet, Modbus, Lon and IP-based networks., • Ability to read and interpret mechanical drawings, electrical schematics, and control sequences., • Experience with Multiple BAS products preferred., • Basic understanding of control theory and system architecture., • Must possess a valid driver's license and be able to pass background and drug screening., • OSHA 10 or 30 certification., • Experience with conduit bending and panel fabrication., • Familiarity with network cabling (Cat5e, Cat6, fiber)., • Certification or factory training in Distech, Honeywell, JCI or Niagara platforms., • Competitive hourly rate or salary based on experience. ($20-35/hr), • Company vehicle, • Health, dental, and vision insurance., • 401(k) with company match., • Paid time off and holidays. Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job DescriptionCompany Description Preferred Apartment Communities combines expertise with a people-first approach, delivering consistent care and communities that feel like home. Our mission is to provide exceptional living experiences for our residents while building a workplace where our associates feel supported, inspired, and prepared to grow. Guided by the belief that we should always be better today than yesterday, we champion continuous improvement across every level of our organization. Through operational excellence, strategic partnerships, and a people-focused approach, we strive to be good neighbors to our residents, to each other, and to the communities we serve. Job Description Responsibilities: Assist in all maintenance requests, preventative maintenance, and amenity area maintenance for the apartment community. Completes maintenance work orders for residents (service appliances, plumbing, HVAC systems, minor electrical, gate systems, pool operations, etc.). Responds and resolves emergency maintenance requests for after business hours calls (weeknights, weekends, and holidays). Prepares vacant apartments to make rent ready. Performs preventative maintenance work. Keep the maintenance shop clean and organized; maintains adequate stock/inventory of parts for equipment, appliances, etc. Interacts directly with residents. Maintains logbooks and databases; enters service requests and status updates into database. Assists in monitoring contractors work performance. Supports the Maintenance Manager in meeting budget responsibilities. Follows and promotes company policies and procedures. Must make Customer Service a priority. If the property does not have a housekeeper, Apartment Maintenance Technician light cleaning duties will be required such as cleaning models, club houses, leasing office, emptying trash, cleaning the grounds and amenity areas, etc. Maintain (clean, orderly, and in working conditions) all amenity areas (pool, compactors, weight rooms, parking decks, etc.) Customer Service Responsibilities A complete clean and neat uniform must be worn when working on any PAA Property including nights and weekends, if applicable. Personal appearance must be clean and neat at all times, according to PAA policy. Communicate with residents and prospects in a manner consistent with PAA's standards. Read and/or listen to resident requests/complaints. Receive resident complaints in a calm, open and professional manner. Solve problems quickly, usually within 24 hours, or contact supervisor for immediate assistance. Deliver newsletters, correspondence, etc. to residents' apartment. Coordinate, set up, attend, and clean up after resident functions (food, tables, display areas, etc.) as requested by the Community Manager. Qualifications Requirements: 1-3 years maintenance experience (apartment maintenance experience preferred) Troubleshooting and problem-solving skills. Budget or basic business finance helpful. Refrigeration certification (type 2 or universal) or obtain in the first 90 days of employment. Valid driver's license (free from major moving violations) and dependable transportation. Physical Requirements: Must be able to use various hand tools and test equipment. Must be able to bend, stoop, and kneel for extended periods of time. Must be able to push and pull up to 300 pounds on wheels. Must be able to lift up to 50 pounds. Must be able to climb ladders of up to 40 feet in height. Must be able to use a hand-truck. Special Physical Requirements As part of your daily maintenance routine, you may be required to move appliances from one apartment unit to another apartment unit on opposite ends of the property. The appliance may have to be transferred by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to well over 300 pounds. Commercial laundry rooms are equipped with single washing machines and/or stacked (double) clothes dryers which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 300 pounds. On occasion, you may be involved in repairs to the building structure. You may be required to move or transport several different building type materials weighing several pounds to over 300 pounds. At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All functions require different physical exertion, and their weight depends on the equipment (usually in excess of 100 pounds). You will be required to perform certain resident service functions or make upgrades to the apartment home. An example would be to install lighting or ceiling fans. Both duties would require the work to be done using a step ladder while lifting. Additional Information What We Offer: • Generous PTO program, • 13 paid holidays plus 3 floating holidays and paid volunteer day, • Comprehensive, affordable medical coverage as well as company-paid dental and vision coverage available to all full-time, regular associates, • 401k with exceptional employer match, • Associate Apartment Discount, • Educational Assistance Program (tuition and certifications) Review our privacy policy here: Preferred Apartment Communities is proud to be a US EPA ENERGY STAR® Partner.

Job Description Why Bevara Named “Top Places to Work” and one of the “Fastest Growing Companies”, Bevara focuses on empowering our team members with the tools and support they need to reach their professional aspirations. We foster a vibrant, interactive team culture that values collaboration. We promote a healthy work-life balance and pride ourselves on working hard while also enjoying our time together! Be apart of something big and join our team! About the Position We are looking for a dedicated individual to provide world-class service at multiple commercial buildings throughout the Atlanta metro area. As a Mobile Maintenance Technician, you will be responsible for maintaining a property’s physical condition and safeguarding it against damage, loss, and deterioration. The ideal candidate is proactive, self-motivated, and versatile—a true jack of all trades. *This position does include a work vehicle * Typical Hours: 1st shift What you’ll be doing • Conduct regular assessments of building systems., • Perform minor repairs, preventative maintenance, and respond to service requests for both interior and exterior building equipment., • Manage work order requests related to mechanical, electrical, plumbing, and fire systems., • Proactively maintain an ongoing task list for the property management team., • Serve as the primary contact for vendors, overseeing their check-in/out process and escorting them to their work areas while documenting the work completed., • Assist with fire panel and extinguisher inspections., • Ensure a safe job site and adhere to company, OSHA, and client-specific safety standards., • High School Diploma or GED., • Preferred 3-5 years of experience in commercial building operations and engineering., • Knowledge of HVAC, electrical, and plumbing systems., • Ability to manage multiple projects and make independent decisions., • Basic computer skills and proficiency with smartphones (email, texts, work order systems)., • Current and valid driver’s license. Offers of employment are contingent upon successful completion of the following: • Drug screening, • Background check, • Physical examination, • Company vehicle provided., • Salary increases twice per year., • Comprehensive health benefits for employees and their families., • 401(k) retirement plans with company match starting Day 1!, • Paid Time Off (PTO) and holidays., • Company-provided life insurance., • Educational assistance., • Free on-site parking., • Company cell phone and uniforms plus annual uniform allowance., • Tools and equipment provided for your job.

___Job ID295206 LocationAtlanta, Georgia Full/Part TimeFull-Time Regular/TemporaryRegular ______ Overview Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers. About Georgia Tech Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school. Georgia Tech's Mission and Values Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do: 1. Students are our top priority., 2. We strive for excellence., 3. We thrive on diversity., 4. We celebrate collaboration., 5. We champion innovation., 6. We safeguard freedom of inquiry and expression., 7. We nurture the wellbeing of our community., 8. We act ethically., 9. We are responsible stewards. Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact. About the School of Electrical and Computer Engineering (ECE) at the Georgia Institute of Technology The School of Electrical and Computer Engineering (ECE) at the Georgia Institute of Technology is one of the largest producers of electrical engineers and computer engineers in the United States. Almost 2,600 students are enrolled in the School's graduate and undergraduate programs, and in the last academic year, 801 degrees were awarded. All ECE undergraduate and graduate programs are in the top five of the most recent college rankings by U.S. News & World Report. In addition to the main campus in Atlanta, Georgia, ECE also has permanent operations at Georgia Tech-Lorraine in France and Georgia Tech-Shenzhen in China. Graduate students who spend at least one semester each at three Georgia Tech locations (Atlanta, Lorraine, and Shenzhen on three continents (North America, Europe, and Asia) can earn the Georgia Tech Global Engineering Immersion Program (GEIP) Certificate when they receive the Georgia Tech M.S. degree. Over 110 ECE faculty members are involved in 11 areas of research and education: bioengineering, computer systems and software, digital signal processing, electrical energy, electromagnetics, electronic design and applications, nanotechnology, optics and photonics, systems and controls, telecommunications, and VLSI systems and digital design: and the School is either home to or a key player in almost 20 research centers and consortia. ECE is key to Georgia Tech's growing reputation as an internationally recognized educational and research and development university. ECE is firmly committed to sustaining excellence in traditional areas of strength and venturing into burgeoning areas of opportunity. Atlanta, GA The School of Electrical and Computer Engineering at the Georgia Institute of Technology invites applications for a tenure-track faculty position in the area of Heterogeneous Integration and Advanced Packaging (HI/AP). The School is interested in HI/AP topics including, but not limited to: bonding technologies for 3DHI, co-packaged photonics, 2.5D/3D HI technologies, advanced materials for HI/AP, system co-design and optimization, glass-core packaging technologies, and advanced assembly and interconnect technologies. Focus on system level demonstrations using HI/AP and circuit/system co-design are relevant. The School seeks individuals with outstanding potential for research achievement, and a strong aptitude and interest in undergraduate and graduate teaching, as well as interest and experience in translating their research to commercial applications. Applicants should have earned a Ph.D. or equivalent. The candidate will also be associated with the Georgia Tech Packaging Research Center, which is a multidisciplinary research center with strong industry and government support devoted to heterogeneous integration and advanced packaging. Candidates will be considered at the ranks of Assistant and Associate Professor. Exceptional candidates will also be considered at the rank of full Professor. Interested candidates should submit an application letter, curriculum vitae, research statement, teaching statement, and the names of three references electronically. Georgia Tech prides itself on its technology resources, collaborations, and high-quality student body. We encourage applications from women, underrepresented minorities, individuals with disabilities, and veterans. Georgia Tech has policies to promote a healthy work-life balance. To receive full consideration, interested applicants should submit their materials on or before June 15, 2026. A terminal Degree Interested applicants should prepare a complete package that includes: • a cover letter outlining relevant experience,, • a curriculum vitae, The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at ___. Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at ___. The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract. More information on these policies can be found here: ___Board of Regents Policy Manual | University System of Georgia (usg.edu). The candidate of choice will be required to pass a pre-employment background screening. .

Description Are you ready for your next career challenge? We are in search of a Lead Substation Physical Engineer to join our diverse and fast-paced Atlanta, GA organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in leading and designing high voltage utility substation projects. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. Remote Option: • Candidates must be located in the United States and live further than 50 miles from the Atlanta, GA office., • Preferred candidates would be located in (Georgia, South Carolina, Tennessee, or Alabama), • Must be willing to travel to customer sites and in office as needed. (10% to 20% travel) *Hybrid Work Schedule: (3 days in office) • 2-3 Days of In-Person Connection: Build strong relationships with colleagues and clients by being in the office or on-site. It's the perfect way to strengthen collaboration and ensure seamless communication., • Networking Events: Expand your horizons and make valuable connections at industry-leading events. You'll be in the right rooms, with the right people, at the right time., • Continuous Development: Stay at the forefront of innovation by participating in top-tier training programs and conferences. Personal growth isn't optional here; it's part of the package., • The Best of Both Worlds: With the flexibility to work remotely on other days, you'll have the freedom to focus, recharge, and bring your A-game to every opportunity. If this sounds like the kind of environment where you can thrive, keep reading! The Challenge: • Perform conceptual and detailed HV and MV Substation Physical/Electrical design for medium to large scale utilities/substations (including basic layout, electrical arrangement, one line, three line drawings, plan-section, grounding, AC and DC system drawings), • Perform advanced engineering studies and calculations, • Perform Quality Control reviews on medium to large substation physical design projects, • Create and review bill of materials for substation physical projects, • Develop and review proposals, and scopes of work for substation physical projects, • Develop and provide advanced technical presentations to the team to assist with staff technical development, • Be involved in client interaction (including site visits) with a drive for customer satisfaction, • Provide leadership and mentorship to junior engineers, • Possess excellent communication skills and the ability to interact with the internal teams and clients to meet project objectives Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! What you will bring to the table: • Bachelor's degree in Electrical, Mechanical, civil or related degree with eight (8+) plus years of Substation physical design experience., • Leadership experience in executing substation projects, • Excellent communication skills and ability to interact with the internal team and clients to meet project needs., • Ability to lead bids and proposal effort for utility clients, • Ability to perform quality control checks on substation design projects., • Act as a supervisor for one to six direct reports, • Ability to read and design substation physical drawings such as one line drawings, three line drawings, plan-section drawings, foundation, grounding drawings., • Ability to read and design substation protection and control drawings such as one-line drawings, three line drawings, AC/DC schematic drawings and wiring design, • Ability to create and check bill of materials for substation physical, • Act as a key contributor to the develop substation physical application documents to define design scope, philosophies, methodologies, and criteria for medium and high-voltage substation projects., • Experience with grounding studies/lightning protection and lighting studies., • Ability to attend site visit at customer location It would be nice if you had: • Registered Professional Engineer (P.E.) License, • Master's degree in related field, • Experience with QA/QC, • Working knowledge of protection and control design, • Experience with BUS calculations., • Experience with WinIGS or CDEGS, • Experience with SDS AutoCAD Electrical software. In this role, you can expect to grow: • With opportunities for both technical and non-technical training, • By working with different types of projects ranging from distribution to transmission level voltages, • By participating in our mentorship program, • By gaining knowledge in electrical power calculations and NESC WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click ___! At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world's toughest problems, and ___ with a welcoming culture that recognizes the importance of a strong work/life balance, as well as ___. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. PDSSUBSTATION PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. January 12, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Featuredjob

As aField Service Technician, you'll play a key role in supporting our customers by inspecting, testing, troubleshooting, and maintaining electrical power distribution equipment. You'll work hands-on with a wide range of systems, deliver exceptional service, and be a trusted resource in the field representing Sunbelt Solomon. What You'll Do • Inspect, test, troubleshoot, and maintain low, medium, and high-voltage electrical distribution equipment., • Perform electrical testing on transformers, breakers, switchgear, relays, and related equipment., • Respond to customer needs including occasional emergency calls with professionalism and urgency., • Ensure a safe work environment by following company and customer safety standards., • Maintain accurate daily reports and documentation., • Properly manage, check in/out, and care for company tools and test equipment., • Travel locally and regionally, with periodic overnight assignments., • High school diploma or GED; technical training or associate degree in electrical trades preferred., • NETA certification preferred; will substitute 3 years of relevant work experience on commercial or industrial electrical projects, • Strong communication skills and a commitment to exceptional customer service., • Ability to read and interpret one-line diagrams and control schematics., • Skilled in the use of industrial electrical test equipment., • Valid driver's license and ability to meet background and drug-screen requirements., • Physical capability to work outdoors, lift up to 75 lbs., operate tools, and use required PPE (arc-flash gear, fall protection, respirators, etc.)., • Eligibility to work in the US without need for employer sponsored VISA (work permit)

Job Description Job Description The Field Service Technician provides technical support to customers through on-site troubleshooting and installing. The preferred candidate will have excellent technical and customer service/communication skills. The Field Service Technician must possess the ability to service and troubleshoot multiple systems including a strong understanding of security, network cabling, and be knowledgeable in AV. Skills and Abilities • Current industry and technical knowledge in Access Control, Intrusion, CCTV, • Ability to troubleshoot issues with systems, • Basic computer skills, • Current industry and technical knowledge in network cabling, • Knowledge in AV a plus, • Ability to troubleshoot issues with network cabling, • Must have your own hand tools, • Must be able to pass a background check and drug screen, • Excellent communication skills Duties and Responsibilities • Troubleshoot and or install access control/intrusion and CCTV devices., • Track all maintenance activity start to finish with proper documentation., • Perform administrative tasks such as completing service tickets with detailed explanations and resolutions., • Travel to various job sites required., • Work outside of normal business hours (when requested)., • Communicate with service dispatcher and customer., • Must be dependable and punctual., • Ability to pass background check., • Must have a valid Driver’s License., • Company vehicle will be provided. Physical Requirements • The employee must be able to lift and/or move up to 70 pounds, be able to climb ladders up to 20 feet tall and be able to work in small spaces or closets. The employee is frequently required to stand, climb or balance, kneel, crouch, or crawl. Benefits: • Health Insurance, • Dental Insurance, • Vision Insurance

Job DescriptionTitan is a leading national electrical contractor with locations in Florida, Georgia, Texas, North Carolina, Tennessee, and South Carolina. Titan maintains a strong reputation as a leading high-quality, customer-centric service provider which has resulted in strong financial growth since its inception in 2006. As a result, the company has become a trusted partner to its customers and suppliers and has established a proven track record of year-over-year growth. The company has significant opportunities to further penetrate its existing markets and expand into other geographies and service lines. Location: Duluth, GA \u007C 1-85/Pleasant Hill Why Join Titan Electric? Working in the flagship market of Titan Electric is thrilling right now! By placing people at the center of our business and all we do, whether it's developing our datacenter capabilities or innovating to provide clients what they want, we're increasing our pace as the nation’s fastest growing electrical contractor. The Work We’re building electrical systems faster, safer, and smarter—and our prefab shop is at the center of it. As a Prefab Shop Welder, you’ll fabricate high‑quality electrical assemblies that go directly to live commercial job sites. Your work reduces field install time, improves safety, and keeps projects on schedule. If you take pride in clean welds, repeatable quality, and building things the right way—this role is for you. This is shop‑based work (not field welding) with consistent hours and a stable workload. What You’ll Be Doing • Weld and fabricate electrical prefab assemblies (racks, supports, frames, sleeves, embeds, etc.), • Perform MIG and/or stick welding on steel components (AWS quality expectations), • Read and work from shop drawings, cut sheets, and basic fabrication prints, • Cut, fit, and prep materials for welding (grinding, beveling, jig setup), • Work with the prefab and electrical teams to meet production goals, • Inspect finished assemblies for accuracy, strength, and quality, • Maintain welding equipment and shop tools, • Follow shop safety protocols and quality standardsWhat We’re Looking For, • 2+ years of welding experience (fabrication or industrial preferred), • MIG welding experience required (stick welding a plus), • Ability to read basic drawings or diagrams, • Experience welding steel (light to medium gauge), • Ability to consistently produce clean, repeatable welds, • Comfortable working on your feet in a shop environment, • Reliable, detail‑oriented, and team‑mindedNice to Have (Not Required), • Experience supporting electrical construction or prefab operations, • Familiarity with electrical supports (Unistrut, strut racks, trapeze assemblies), • AWS welding certification, • Forklift or overhead crane experienceWhy This Role Is Different, • ✅ No travel, • ✅ Consistent hours, • ✅ Indoor shop environment, • ✅ Work that directly impacts real projects Benefits • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Referral program, • Tuition reimbursement

APG is a leading EPC (Engineering, Procurement, and Construction) contractor specializing in complex, high-value electrical infrastructure projects, including high-voltage substations, utility-scale and commercial solar installations, microgrids, battery energy storage systems (BESS), and other advanced electrical solutions for data centers, industrial facilities, and commercial clients. We deliver turnkey solutions that power the future with reliability, efficiency, and innovation. The role requires full-time nationwide travel with a structured 3 weeks on and 1 week at home travel schedule. Candidates must be prepared to travel to project sites across the U.S. The Construction Manager oversees several concurrent mid-sized energy retrofit construction projects throughout the US. The ideal candidate will have 5-7 years total professional experience that includes a wide range of experience in field operations and construction means and methods. The candidate will have a high school diploma or equivalent certificate. The ideal candidate will also demonstrate success in the following skills and abilities: • Manage multiple concurrent energy construction projects across the U.S., • Provide valuable cost and constructability input during the design phase., • Coordinate submittal, schedules, subcontractors and field activities., • Lead construction meetings with subcontractors, APG teams, and clients., • Develop and maintain detailed project schedules (including 3-week lookahead)., • Ensure strict adherence to construction specifications QA/QC, and safety standards., • Oversee project closeout documentation, and as-bult drawings., • Capture and manage field redlines and ensure accurate project documentation., • Maintain construction management software per company standards., • Build and maintain strong client relationships and ensure project success., • Valid Driver's License and ability to travel extensively nationwide., • 5-7 years of construction management experience with strong field operations background., • Experience with data center substations, microgrids, and Battery Energy Storage Systems (BESS) is required., • Strong knowledge of the construction means, methods, and energy infrastructure projects., • Proven ability to manage schedules, budgets, and quality simultaneously., • Ability to lead teams, subcontractors, and client interactions effectively., • Excellent communication, organizational, and problem-solving skills., • Capable of leading confidently in identifying, correcting and/or avoiding potential schedule, budget or quality issues. The ability to make decisions, while balancing cost implications, to avoid disruptions in the work or customers' operations is required., • Be able to apply innovative and effective management techniques to maximize employee and Subcontractor performance., • Relies on experience and judgment to plan and accomplish project's goals. A wide degree of creativity and latitude is expected., • Thorough understanding of Company and industry practices, policies, and standards., • Desire and capability to lead others in the construction process., • Effectively engage clients in the construction process. Respond to client concerns in an effective and timely manner., • Possess excellent organizational skills. Capable of maintaining project documentation and working on multiple activities/projects at one time., • Possess excellent verbal and written communication skills., • Ability to lift up to 50lbs and climb ladders as needed., • OSHA 30 Certification, • Experience reviewing and implementing construction specifications and drawings., • AutoCAD experience (drafting and redlining) is a strong plus., • Familiarity with ESCO design and commissioning processes. Alternative Power Generation, Inc. participates in E-Verify.

Job Description We're not just offering a job, we're inviting you to be part of a team built on PARTNERSHIP, INNOVATION, EXCELLENCE, and SAFETY at Wallace Electric. • PARTNERSHIP means we work together with trust, loyalty, and an owner mindset, always striving for win-win outcomes., • INNOVATION drives us to think differently and create real value in everything we do., • EXCELLENCE pushes us to set high expectations and deliver exceptional results. We are part of Kelso Industries, which is comprised of 25+ (and growing) market-leading operating companies with over 2,600 employees that deliver unmatched HVAC, mechanical, refrigeration, plumbing, and electrical solutions. We are actively building the nation's preferred technical service partnership for commercial MEP+ ecosystems, empowering industrial, commercial, and institutional clients—including Fortune 500 companies and other industry leaders across the United States—with reliable, innovative service. Job description: Wallace Electric Company is currently hiring highly skilled Lead Electricians. The Commercial & Industrial Lead Electrician will oversee electrical installations, maintenance, repairs, and troubleshooting across commercial construction and industrial environments. This role directs job‑site electrical crews, ensures safety and code compliance, and supports project management through scheduling, planning, documentation, and quality control. The Lead Electrician acts as the technical authority on-site and ensures projects are completed efficiently and to specification. Key Responsibilities Leadership & Supervision • Supervise electricians, apprentices, and subcontractors on commercial and industrial job sites., • Train and mentor team members to elevate skills, safety, and job performance., • Assign daily work tasks, inspect completed work, and ensure compliance with project specifications., • Install, maintain, and troubleshoot:, • Transformers, switchgear, panels, and distribution systems, • Lighting systems and lighting controls, • Motor Control Center, Variable Frequency Drive, and industrial equipment, • PLC wiring, control circuits, and automation systems, • Conduit systems (e.g., EMT, RMC, PVC, flex, specialty conduit), • Backup power systems including UPS and generators, • Read and interpret drawings, blueprints, schematics, and diagrams., • Work with project managers to plan manpower, materials, tooling, and scheduling., • Track progress, identify potential issues early, and provide daily updates., • Maintain accurate records including:, • Redlines, • Daily logs, • Material usage, • Change orders, • Enforce OSHA, NFPA 70E, NEC, and company safety standards., • Conduct daily safety briefings and hazard assessments., • Ensure proper PPE use and safe execution of energized and de‑energized work. These KPIs measure performance, productivity, compliance, and leadership effectiveness. Project Execution & Quality • Project Completion Accuracy: ≥ 95% of work completed with zero rework related to workmanship., • Blueprint/Spec Compliance: ≤ 2% deviation from design without approved change orders., • Labor Utilization: Maintain crew productivity within ±10% of labor estimates., • Task Completion Rate: Minimum 90% of tasks completed on or ahead of schedule., • Zero Recordable Incidents: Maintain OSHA recordable incident rate of 0.0., • Safety Audit Score: 95%+ compliance on internal and external safety audits., • Crew Skill Development: Demonstrated improvement in apprentice evaluations quarter‑to‑quarter., • Turnover Reduction: Maintain crew retention above 90%., • Client Satisfaction Rating: 4.5/5 or higher., • Issue Resolution Time: Respond to and resolve site issues within 24–48 hours., • High school diploma or equivalent; trade school preferred., • State‑issued Journeyman or Master Electrician License, preferred., • 5–8 years commercial/industrial electrical experience., • 5+ years of leadership, foreman, or lead‑electrician experience., • Strong knowledge of NEC, NFPA 70E, and industrial/commercial electrical systems., • Strong leadership and crew management skills., • Ability to read and interpret detailed electrical drawings., • Advanced troubleshooting capability across commercial and industrial systems., • Excellent communication and organizational abilities., • Ability to lift 50+ lbs and perform physically demanding tasks., • Ability to work at heights, in confined spaces, and in varying environments., • Commercial construction sites, industrial plants, warehouses, and active facilities. Been in Business Since 1937. Please Contact Shon 334-750-7390, if you meet all qualifications. Job Type: Full-time Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off Why Join Us? We're committed to attracting talented individuals who seek a company with a strong foundation of success and an outstanding culture. We proactively provide competitive compensation, comprehensive benefits, and clear pathways for career advancement with autonomy and flexibility in an entrepreneurial environment. Learn more about us at We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment on the basis of race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Traveling Technician (50–60 Hours/Week)Have you lead other Technicians before? 2+years experience?If you thrive in the fast-paced environment of 500k+ sq. ft. distribution centers and don’t mind the travel, this is the role for you. We’re looking for a hard-working Technician to coordinate daily tasks with the Foreman, operate 40ft+ lifts, and keep our installations on track. We offer steady OT and the chance to run crews on some of the biggest builds in the country. We seek self-motivated and reliable technicians for service and special installation projects, who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Wachter? • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package: Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • MD Live, TriaHealth, Legal Shield, • Company-Matched 401(k) and IRA Retirement SavingsQualifications:, • 2–5+ years of low-voltage or data cabling experience, • Strong Cat6 and fiber termination and testing skills, • Experience with paging, wireless/AP cabling, CCTV, and access control cabling, • Ability to read prints and work with minimal supervision, • Comfortable working at height and in large warehouse environments, • Ability to work independently or support small crews, • Proficient with smartphones, email, and basic spreadsheets, • Basic telecommunications tools, PPE, and reliable transportation, • Valid driver’s license with clean driving record, • Willingness to travel extensively and work 50–60 hour weeksKey Responsibilities May Include:, • Install, terminate, and test Cat6 and fiber (single-mode and multi-mode) cabling, • Perform paging, wireless/AP cabling, CCTV, and access control cabling, • Lead and support small crews of 2–4 technicians as a working lead when assigned, • Build and dress MDFs, IDFs, racks, patch panels, and cable management, • Install cable pathways including J-hooks, ladder rack, innerduct, and tray, • Operate boom and scissor lifts (40+ ft work), • Troubleshoot cabling and system issues, • Ensure cables are neatly dressed, labeled, and installed per standards, • Provide daily progress updates to the Lead or Foreman

Job Description We're not just offering a job, we're inviting you to be part of a team built on PARTNERSHIP, INNOVATION, EXCELLENCE, and SAFETY at Wallace Electric. • PARTNERSHIP means we work together with trust, loyalty, and an owner mindset, always striving for win-win outcomes., • INNOVATION drives us to think differently and create real value in everything we do., • EXCELLENCE pushes us to set high expectations and deliver exceptional results. We are part of Kelso Industries, which is comprised of 25+ (and growing) market-leading operating companies with over 2,600 employees that deliver unmatched HVAC, mechanical, refrigeration, plumbing, and electrical solutions. We are actively building the nation's preferred technical service partnership for commercial MEP+ ecosystems, empowering industrial, commercial, and institutional clients—including Fortune 500 companies and other industry leaders across the United States—with reliable, innovative service. Position Overview Wallace Electric Company is currently seeking a Commercial & Industrial Electrical Superintendent for our Data Centers clients. The Superintendent is responsible for overseeing all field electrical operations on commercial and industrial construction projects. This role ensures work is completed safely, on schedule, within budget, and in accordance with project specifications, codes, and client expectations. The superintendent leads crews, coordinates subcontractors, manages materials, and supports communication between project management and field operations. To be successful in this role, the individual will be laser-focused on the project at hand, while continuing to be decisive, strategic, structured, and dedicated to producing high-quality results for the organization and the client. The Superintendent will rise to the occasion when meeting stringent deadlines, understanding the gravity of what it means to follow-up and follow-through. The individual will have exceptional communication skills and will exemplify strong leadership, serving as a mentor to their team while leading by example. The individual will not second-guess or shy away from jumping into the mighty trenches with their crew when it is crunch time or deemed necessary. The Superintendent must have at least five years of experience, managing all phases of a Data Center project(s). Key Responsibilities Field Leadership & Workforce Management • Lead, supervise, and mentor electricians, apprentices, and subcontractors., • Assign daily tasks, manage labor allocation, and track productivity., • Conduct daily huddles, weekly planning meetings, and toolbox talks., • Interpret electrical drawings, specifications, and scope to plan field activities., • Create look-ahead schedules and coordinate manpower needs., • Ensure work is installed to NEC, local codes, engineering documents, and quality standards., • Promote a zero‑incident safety culture on all job sites., • Conduct safety audits, job hazard analyses (JHAs), and enforce PPE usage., • Ensure compliance with OSHA, local regulations, and company policies., • Act as the primary field liaison with project managers, general contractors, inspectors, and other trades., • Coordinate scheduling for inspections, utility companies, and equipment vendors., • Forecast and request materials, tools, and equipment to maintain workflow., • Verify material deliveries and manage jobsite inventory., • Monitor labor hours against budget and report variances., • Maintain daily logs, timecards, and field paperwork. Education & Certifications • High school diploma or GED required; technical school or electrical trade program preferred., • Valid state Journeyman or Master Electrician license preferred., • OSHA 30 certification strongly preferred., • 10+ years of experience in commercial and industrial electrical construction., • 5+ years of supervisory or superintendent experience managing crews, subcontractors, and multi-phase electrical installations, with at least 5 years of experience specializing in Data Center projects., • Proven experience leading electrical work on large-scale commercial, industrial, manufacturing, or infrastructure projects., • Strong understanding of the National Electrical Code (NEC), NFPA 70E, OSHA standards, and local building codes., • Ability to read and interpret electrical drawings, one-line diagrams, schematics, and project specifications., • Experienced in electrical system installation, quality inspections, testing, and commissioning., • Strong working knowledge of conduit routing, cable tray systems, terminations, equipment installation, and power distribution., • Proven ability to lead, mentor, and supervise electricians, apprentices, and subcontractors., • Strong communication skills for interaction with project managers, engineers, inspectors, and clients., • Ability to plan daily/weekly schedules, allocate manpower, and monitor productivity., • Skilled in conflict resolution, decision-making, and maintaining worksite discipline., • Experience coordinating with other trades and managing sequencing of electrical work., • Proficient in Procore, PlanGrid, Bluebeam, and Microsoft Office or similar project management tools., • Ability to prepare daily reports, track progress, manage RFIs, and support change order documentation., • Strong understanding of material procurement, equipment coordination, and inventory control., • Ability to work on active construction sites, including climbing ladders, walking uneven surfaces, and lifting up to 50 lbs., • Willingness to work extended hours, nights, or weekends as project schedules require. We're committed to attracting talented individuals who seek a company with a strong foundation of success and an outstanding culture. We proactively provide competitive compensation, comprehensive benefits, and clear pathways for career advancement with autonomy and flexibility in an entrepreneurial environment. Learn more about us at We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment on the basis of race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business.

Job DescriptionSalary: $83k - $150K+ Bonus Mission Critical Electrical Estimator Data Centers | Hyperscale | Industrial | Commercial Construction Ace Electric, Inc. Build the Infrastructure Powering the Future At Ace Electric, were building more than electrical systemswere building the critical infrastructure that powers the digital world. From hyperscale data centers and mission critical facilities to advanced manufacturing, healthcare, and large-scale commercial projects, our teams are helping shape some of the most complex and high-profile projects in the country. If you're an experienced Electrical Estimator looking for: • larger, more complex projects,, • long-term career growth,, • a strong backlog,, • a people-focused culture, Why Join Ace Electric? Founded in 1975, Ace Electric has grown into one of the nations leading electrical contractors with a reputation built on: • Safety First Culture, • Strong Leadership & Smart Growth, • Quality Workmanship, • Long-Term Client Relationships Position Overview As a Mission Critical Electrical Estimator, you will play a key role in the pursuit and execution of complex electrical construction projects including: • Hyperscale Data Centers, • Mission Critical Facilities, • Industrial & Manufacturing Facilities, • Distribution Centers This is an opportunity to be part of a fast-growing organization where your expertise and leadership directly influence major project wins across the Southeast and beyond. Key Responsibilities • Review electrical drawings, specifications, and project documents, • Perform detailed takeoffs and prepare accurate cost estimates, • Develop budgets, proposals, bid packages, and scope reviews, • Analyze labor, material, equipment, and subcontractor pricing, • Coordinate with vendors, suppliers, engineers, and operations teams, • Participate in preconstruction planning and value engineering efforts, • Assist with project turnover and support awarded projects, • Identify risks, opportunities, and cost-saving strategies, • Maintain strong relationships with clients, subcontractors, and industry partners Preferred Experience • 4+ years of electrical estimating experience, • Experience in:, • Mission Critical / Data Centers, • Industrial Construction, • Large Commercial Construction, • Design-Build Projects, • Accubid or similar estimating software, • Bluebeam, • Microsoft Excel, • Blueprint and specification interpretation, • Strong communication and collaboration abilities, • High attention to detail and organization, • Strategic and analytical thinking, • Ability to manage multiple deadlines in a fast-paced environment, • High School Diploma or GED required, • Post-secondary education or industry certifications preferred, • Valid Drivers License Strong backlog and long-term project stability Career growth opportunities with one of the nations top electrical contractors Large, complex, high-visibility projects Collaborative leadership team Safety and people-focused culture Opportunities to support major mission critical growth initiatives Competitive compensation and benefits package Our Mission To Identify, Hire, Train, and Retain the Very Best People. At Ace Electric, our people are the foundation of everything we build. Equal Opportunity Employer Ace Electric is proud to be an Equal Opportunity Employer. We are committed to creating a workplace built on respect, opportunity, and inclusion for all employees. Ready to help power the future? Apply today and grow your career with Ace Electric.

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. Job description: Wallace Electric Company is currently hiring highly skilled Lead Electricians. The Commercial & Industrial Lead Electrician will oversee electrical installations, maintenance, repairs, and troubleshooting across commercial construction and industrial environments. This role directs job‑site electrical crews, ensures safety and code compliance, and supports project management through scheduling, planning, documentation, and quality control. The Lead Electrician acts as the technical authority on-site and ensures projects are completed efficiently and to specification. Key Responsibilities Leadership & Supervision • Supervise electricians, apprentices, and subcontractors on commercial and industrial job sites., • Train and mentor team members to elevate skills, safety, and job performance., • Assign daily work tasks, inspect completed work, and ensure compliance with project specifications., • Install, maintain, and troubleshoot:, • Transformers, switchgear, panels, and distribution systems, • Lighting systems and lighting controls, • Motor Control Center, Variable Frequency Drive, and industrial equipment, • PLC wiring, control circuits, and automation systems, • Conduit systems (e.g., EMT, RMC, PVC, flex, specialty conduit), • Backup power systems including UPS and generators, • Read and interpret drawings, blueprints, schematics, and diagrams., • Work with project managers to plan manpower, materials, tooling, and scheduling., • Track progress, identify potential issues early, and provide daily updates., • Maintain accurate records including:, • Redlines, • Daily logs, • Material usage, • Change orders, • Enforce OSHA, NFPA 70E, NEC, and company safety standards., • Conduct daily safety briefings and hazard assessments., • Ensure proper PPE use and safe execution of energized and de‑energized work. These KPIs measure performance, productivity, compliance, and leadership effectiveness. Project Execution & Quality • Project Completion Accuracy: ≥ 95% of work completed with zero rework related to workmanship., • Blueprint/Spec Compliance: ≤ 2% deviation from design without approved change orders., • Labor Utilization: Maintain crew productivity within ±10% of labor estimates., • Task Completion Rate: Minimum 90% of tasks completed on or ahead of schedule., • Zero Recordable Incidents: Maintain OSHA recordable incident rate of 0.0., • Safety Audit Score: 95%+ compliance on internal and external safety audits., • Crew Skill Development: Demonstrated improvement in apprentice evaluations quarter‑to‑quarter., • Turnover Reduction: Maintain crew retention above 90%., • Client Satisfaction Rating: 4.5/5 or higher., • Issue Resolution Time: Respond to and resolve site issues within 24–48 hours., • High school diploma or equivalent; trade school preferred., • State‑issued Journeyman or Master Electrician License, preferred., • 5–8 years commercial/industrial electrical experience., • 5+ years of leadership, foreman, or lead‑electrician experience., • Strong knowledge of NEC, NFPA 70E, and industrial/commercial electrical systems., • Strong leadership and crew management skills., • Ability to read and interpret detailed electrical drawings., • Advanced troubleshooting capability across commercial and industrial systems., • Excellent communication and organizational abilities., • Ability to lift 50+ lbs and perform physically demanding tasks., • Ability to work at heights, in confined spaces, and in varying environments., • Commercial construction sites, industrial plants, warehouses, and active facilities. Been in Business Since 1937. Please Contact Shon 334-750-7390, if you meet all qualifications. Job Type: Full-time Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off Why Join Kelso Industries? Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. Position Overview Wallace Electric Company is currently seeking a Commercial & Industrial Electrical Superintendent for our Data Centers clients. The Superintendent is responsible for overseeing all field electrical operations on commercial and industrial construction projects. This role ensures work is completed safely, on schedule, within budget, and in accordance with project specifications, codes, and client expectations. The superintendent leads crews, coordinates subcontractors, manages materials, and supports communication between project management and field operations. To be successful in this role, the individual will be laser-focused on the project at hand, while continuing to be decisive, strategic, structured, and dedicated to producing high-quality results for the organization and the client. The Superintendent will rise to the occasion when meeting stringent deadlines, understanding the gravity of what it means to follow-up and follow-through. The individual will have exceptional communication skills and will exemplify strong leadership, serving as a mentor to their team while leading by example. The individual will not second-guess or shy away from jumping into the mighty trenches with their crew when it is crunch time or deemed necessary. The Superintendent must have at least five years of experience, managing all phases of a Data Center project(s). Key Responsibilities Field Leadership & Workforce Management • Lead, supervise, and mentor electricians, apprentices, and subcontractors., • Assign daily tasks, manage labor allocation, and track productivity., • Conduct daily huddles, weekly planning meetings, and toolbox talks., • Interpret electrical drawings, specifications, and scope to plan field activities., • Create look-ahead schedules and coordinate manpower needs., • Ensure work is installed to NEC, local codes, engineering documents, and quality standards., • Promote a zero‑incident safety culture on all job sites., • Conduct safety audits, job hazard analyses (JHAs), and enforce PPE usage., • Ensure compliance with OSHA, local regulations, and company policies., • Act as the primary field liaison with project managers, general contractors, inspectors, and other trades., • Coordinate scheduling for inspections, utility companies, and equipment vendors., • Forecast and request materials, tools, and equipment to maintain workflow., • Verify material deliveries and manage jobsite inventory., • Monitor labor hours against budget and report variances., • Maintain daily logs, timecards, and field paperwork. Education & Certifications • High school diploma or GED required; technical school or electrical trade program preferred., • Valid state Journeyman or Master Electrician license preferred., • OSHA 30 certification strongly preferred., • 10+ years of experience in commercial and industrial electrical construction., • 5+ years of supervisory or superintendent experience managing crews, subcontractors, and multi-phase electrical installations, with at least 5 years of experience specializing in Data Center projects., • Proven experience leading electrical work on large-scale commercial, industrial, manufacturing, or infrastructure projects., • Strong understanding of the National Electrical Code (NEC), NFPA 70E, OSHA standards, and local building codes., • Ability to read and interpret electrical drawings, one-line diagrams, schematics, and project specifications., • Experienced in electrical system installation, quality inspections, testing, and commissioning., • Strong working knowledge of conduit routing, cable tray systems, terminations, equipment installation, and power distribution., • Proven ability to lead, mentor, and supervise electricians, apprentices, and subcontractors., • Strong communication skills for interaction with project managers, engineers, inspectors, and clients., • Ability to plan daily/weekly schedules, allocate manpower, and monitor productivity., • Skilled in conflict resolution, decision-making, and maintaining worksite discipline., • Experience coordinating with other trades and managing sequencing of electrical work., • Proficient in Procore, PlanGrid, Bluebeam, and Microsoft Office or similar project management tools., • Ability to prepare daily reports, track progress, manage RFIs, and support change order documentation., • Strong understanding of material procurement, equipment coordination, and inventory control., • Ability to work on active construction sites, including climbing ladders, walking uneven surfaces, and lifting up to 50 lbs., • Willingness to work extended hours, nights, or weekends as project schedules require. Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job DescriptionPosition Description: We are an excellent-oriented company that proudly serves Alabama, Tennessee, Georgia, the Carolina's, and Florida area with over 30 years of combined experience. Our family owned and operated business provides exceptional qualify in the commercial/industrial HVAC, Refrigeration, Commercial Kitchen Equipment repairs, installation, and maintenance.We are seeking a skilled and motivated Service Electrician to join our team. The ideal candidate will have experience in the installation troubleshooting and repairing electrical systems, lighting, power distribution and controls in accordance with all local and federal standards. Key Responsibilities: Install, maintain, electrical systems. Including but not limited to: junction boxes, electrical panels, facility retrofits/upgrades, low-voltage, VFDs and lighting systems. Use Power Tools and Hand Tools to complete installations and repairs Test and troubleshoot systems to ensure properly functionality Collaborate with team members to complete projects Provide excellent customer service by addressing client concerns and answering questions Follow safety protocols and adhere to industry standards, such as National Electrical Code (NEC) Qualifications: Minimum of (5) years experience as a Service Electrician or in a related field Familiarity with power tools and hand tools used in low voltage installations Electrician license preferred Understanding of telecommunication systems and networking principles Strong problem-solving skills and attention to detail Good communication and interpersonal skills Friendly with a great deal of patience Good physical condition and strength with the ability to work in awkward spaces. Must be able to pass a background screening and drug screening Must have a valid drivers license and pass MVR check Physical Requirements: Regularly lift and/or move up to 50 pounds; frequently lift and/or move up to 100 pounds with assistance and lift equipment. Repeated bending, twisting, stooping, kneeling, and climbing up and down ladders. Extensive daily travel to work site location. Exposure to electrical, steam, and high heat units that require extreme caution and safety equipment. Occasional to frequent exertion in high and low temperature environments (over heated kitchens, rooftops, outdoors, etc.). Come join our team and be part of a dynamic company dedicated to providing top-notch service to the Commercial Foodservice Repair industry. We look forward to meeting you! $25.00 - $35.00 Hourly

Job DescriptionWachter is seeking a motivated, solution-oriented Lead Journeyman Electrician for heavy commercial and industrial projects. You will act as the Foreman on-site, leading a team (typically 2 Licensed Electricians and 2 Apprentices) to deliver high-quality installations under tight deadlines. This is a long-term opportunity for a pro who can lead a crew while staying hands-on with complex electrical systems. What You'll Do: • Lead "heavy commercial" projects on industrial sites, managing teams of 4+ Electricians/Apprentices., • Perform diverse electrical tasks, from small pipe/wire to large-scale Generator and UPS installs., • Read and interpret blueprints, one-lines, and schematics., • Run/bend conduit and pull/terminate wire in varied environments., • Operate scissor, boom, and bucket lifts as needed., • Troubleshoot industrial controls, automation and PLCs. What We Are Looking For:, • Licensing: Valid Journeyman Electrician License is required., • Experience: Strong background in Industrial/Manufacturing systems (24v DC to 480v), • Leadership: Proven ability to run larger projects and hit "time crunch" deadlines, • Safety: OSHA 10 or 30 certification is a major plus, • Skills: Strong written and verbal communication; ability to work independently or as a team., • Flexibility: Must be willing to work up to 60 hours per week and travel nationwide. Benefits Package: Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D and LTD insurance, • Paid Vacation and Holidays, • Company- Matched 401(k) and IRA Retirement Savings, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of a personal vehicle when travel is required

We are currently looking for a New Construction Electrician with previous commercial experience to join our team!. Installing electrical systems in a new construction setting. Working knowledge of installing electrical systems in a new construction setting.

Prior Experience that Sets a Commercial Parts Pro up for Success. A minimum of 3 years of prior automotive parts experience preferred. The employee is also occasionally exposed to moving mechanical parts; high, precarious places; toxic or caustic chemicals; risk of electrical shock; explosives; and

We're seeking a Commercial and Industrial Electrician II in the Atlanta, GA area to install electrical systems for commercial and industrial projects with minimal supervision.Deliver quality electrical installations that support safe and reliable building operations.Drive project success by completi

Employee performs highly skilled maintenance, installation, repair and troubleshooting work involved with electrical systems. Electrical work may be performed in a number of areas including runways, taxiways, and security gates. Work involves technical application of electrical principles. This is a fully seasoned skilled level capable of independently carrying out most assignments typical of the discipline. Maintains runway and taxiway lights; troubleshoots to identify the problem and repair as needed. Inspect and make repairs to taxiway lights and signs that are powered by 2400 volts and current transformers. • Performs emergency repairs to runway lights and signs when required., • Installs, repairs and services specialized electrical equipment and machinery., • Constructs and maintains service equipment., • Reads electrical circuit diagrams., • Operates power hand tools and other specialized electrical equipment., • Requisitions material and supplies from stockroom; calls vendors to discuss needs for parts and supplies and recommends purchases and suppliers., • Transfers primary power from one power source to another., • Sets poles, strings overhead lines and does overhead line maintenance., • Seven years electrical experience and Class II Unrestricted Electrical Contractor License and or IBEW Journey s Card Associate s degree with a course of study in Electrical Construction and Maintenance or similar area or 10 years of related experience in a commercial, industrial, or facilities maintenance. Licensures and Certifications • Class II Unrestricted Electrical Contractor License or IBEW Journeyman' s Card

VERSYS (Verified Systems) is growing our team of experienced Mission Critical Project Managers for upcoming U.S. data center projects. If you've led power, controls, or cooling scopes in environments where uptime, documentation, coordination, and precision are non-negotiable, we want to hear from you. This role is responsible for project execution, cost, risk, and client outcomes from early planning through turnover and closeout. What you'll own: • Lead overall project execution: scope, schedule, risk, quality, and stakeholder coordination, • Maintain a complete, detailed understanding of project scope and contract requirements, • Drive jobsite readiness, daily priorities, and constraint removal with field leadership, • Lead and support project team members (project engineers, coordinators, and site leadership), • Mentor, coach, and develop project engineers for fast-paced growth, • Own project controls: budgeting, forecasting, cost control, billings, collections, change management, and cash flow, • Deliver accurate monthly status reporting (schedule, cost, risks, and key milestones), • Lead planning and scheduling activities; coordinate sequencing across trades and vendors Your time will be split between office coordination and site engagement; running daily priorities with field teams and subcontractors, walking the work, and staying closely aligned with clients, commissioning partners, and vendors to keep execution tight and communication clear. You'll own the rhythm of the project (schedule, cost, procurement, RFIs/submittals, QA/QC, and turnover documentation), and you'll have the resources and authority to improve processes and implement proven systems that help teams perform at a higher level. The story of VERSYS: VERSYS was founded by commissioning field technicians who wanted to build a company that's different from the industry normone that invests in people and creates opportunities. Our purpose is simple: Providing Opportunities for Others to Succeed. We live our values every day: • Elevate Each Other, • Lead The Way, • Invest In Relationships, • Tackle Tough Problems, • 5+ years of commercial construction project management experience (mission critical / data center experience is a strong asset), • Experience leading complex MEP / electrical / controls / commissioning-heavy scopes on fast-track projects (typically 510+ years total experience is ideal), • Bachelor's degree in Construction Management, Engineering, or a related field is an assetequivalent experience and/or a strong trade/technical background (electrical, mechanical, I&C/BAS) will be considered, • PM credentials such as PMP are a strong asset, • Proven ability to manage schedule, budget, subcontractors, procurement, RFIs/submittals, change management, and client communication in high-pressure environments, • Strong understanding of building processes, systems, and project delivery fundamentals, including QA/QC, safety, and turnover/closeout documentation, • Demonstrated capability in cost estimating, budgeting, forecasting, and project financial controls, • Proficiency with Microsoft Office and common project tools (PM software, cost management/accounting software, scheduling software), • Excellent communication and listening skills; able to resolve complex issues calmly and effectively, • Proven ability to build team morale and lead through accountability and support, • Competitive hourly wages + daily per diems, • Health insurance contribution, • 401(k) matching, • Strong field support, training, and growth to lead roles If this sounds like you and you'd like to join our journey, submit your resume and let's connect. VERSYS is committed to an inclusive work culture. We are an Equal Opportunity Employer and welcome diversity. We are enrolled in the E-Verify program. All qualified candidates are encouraged to apply. Thank you for considering a role with VERSYS. Only candidates selected for an interview will be contacted.

This is an excellent opportunity for an Electrical/Mechanical Estimator to join a reputable organization in the mechanical and electrical commercial field. Experienced mechanical estimator who can immediately contribute without heavy training. Review and interpret mechanical scopes within government

Minimum 1 year of experience as an Electrical Foreman in commercial projects. As a foreman, you will assume a critical role in the installation of commercial electrical systems, effectively leading and supervising a team of 2-3 individuals, ensuring adherence to stringent safety, quality, and effici

Superintendent/foreman experience. Points-Electrical/Night-Shift-Foreman-Atlanta-GA-heAh9s2YYY. Minimum 1 year of experience as an Electrical Foreman in commercial projects.

The Electrical Foreman is responsible for leading and executing all assigned tasks required to successfully install commercial electrical and energy conservation projects. The Electrical Foreman must work in the safest possible manner while following all National Electrical Code (NEC) requirements,