Customer engineer jobs in Deer Park, New YorkCreate job alerts

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

Data Center Power and Control Team.The Mechanical Engineer is responsible for engineered-to-order (ETO) projects, utilizing various configurations of existing design platforms, ensuring that custom configurations of existing and new designs meet customer requirements and can be produced within cost

Job DescriptionWell-established manufacturing company is seeking a Quality Engineer to support ongoing production and continuous improvement initiatives. This role will focus on ensuring product quality, maintaining compliance with industry standards, and driving process improvements across the production lifecycle. Position Summary The Quality Engineer will be responsible for monitoring product quality, conducting inspections, and implementing quality assurance measures. This individual will work cross-functionally with engineering, production, and operations teams to identify issues, perform root cause analysis, and support corrective actions. Ideal candidates will have a strong background in manufacturing and quality systems, with a detail-oriented mindset and a proactive approach to problem-solving. Key Responsibilities • Develop and maintain quality standards and inspection guidelines, • Perform internal audits in accordance with ISO 9001:2015 standards, • Monitor production processes and conduct testing to identify defects early, • Inspect materials and electronic components (including PCB assemblies) for quality and durability, • Analyze defects and implement root cause and corrective action (RCCA) processes, • Prepare reports on quality issues and corrective actions, • Review engineering drawings, blueprints, and quality documentation, • Partner with cross-functional teams to improve overall product quality and customer satisfaction Qualifications, • Experience as a Quality Engineer, Manufacturing Engineer, or similar role, • Strong ability to read and interpret technical documentation, • Experience creating and maintaining technical documentation, • Hands-on experience with RCCA methodologies, • Familiarity with IPC-610 and J-STD standards (electronics manufacturing preferred), • Knowledge of statistical analysis and quality tools, • Strong analytical and problem-solving skills, • High attention to detail and ability to work in a team environment, • Bachelors degree in Mechanical Engineering, Industrial Engineering, or related field, • (Relevant experience may be considered in place of degree) Nice to Have, • Quality certifications (e.g., ASQ, Six Sigma, etc.) Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Pay Details: $80,000.00 to $120,000.00 per year Search managed by: Andrew Khanija Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionDescription: JOB TITLE: Quality Engineer Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment in innovation, quality, and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Quality Engineer to join our dynamic team and continue our mission of excellence. Job Summary: In this role, you will be responsible for ensuring safety and quality of our products and procedures through rigorous inspections, implementations of quality measures, and identification of areas for improvement. You will collaborate with cross-functional teams to address quality issues, drive continuous improvement, and contribute to building a high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering and/or quality assurance, exceptional attention to detail and a proactive mindset. If you are passionate about quality and delivering excellence, we encourage you to apply and become a valued member of the Quality team. Key responsibilities: · Set detailed guidelines on what needs to be checked and what the quality standards are. · Audit our systems based on ISO 9001: 2015 requirements. · Monitor the entire production cycle and perform regular tests to identify potential malfunctions as early as possible. · Inspect product materials and PCB for defects and durability. · Prepare reports on malfunctions and corrective actions (e.g. number of defective raw materials per order) · Review current blueprints and quality documentation · Work with internal teams to increase customer satisfaction by improving the quality of products. Required Qualifications: · Previous work experience as a Quality Engineer, Manufacturing Engineer, or similar role. · In-depth understanding of technical documentation · Able to create a technical document · Working knowledge of RCCA practice · Familiar with IPC610 and J-STD · Familiarity with statistical analysis · Great attention to detail and problem-solving abilities · Team Spirit · Great analytical skills · BSc in Mechanical Engineering, Industrial Engineering, or relevant field. (years of experience will be taken into consideration as a substitute for a BSc) · Additional certification in Quality Assurance is a plus. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job DescriptionTech/Electronics company located in Plainview NY is looking for a Production Engineer to join their team. Full benefits including 26 days off the first year and bonus. Being the Production Engineer, you will help with the engineering and quality agenda with the overall goal to improve the customer satisfaction. You are the main contact towards the suppliers and work as part of the business team together with the supplier to develop and secure the production process, handling of quality deviations, and secure compliance to all company requirements. About the assignment: The Production Engineer is responsible for Quality Assurance including to secure process control for key processes in production. Among other things, you:• Develop new manufacturing processes, and equipment to ensure manufacturing is efficient and effective.• Investigate and analyze problems and derive solutions in the manufacturing process.• Transfer R&D prototypes into series production phase and document the manufacturing processes.• Perform and create First Article Inspection Documents. • Perform Product audits and production risk assessments at suppliers • Develops the recipe with suppliers to match desired taste profile quality and nutrition. • Lead the Supplier Development for quality and manufacturing with responsibility to identify and implement actions and execution of SDP projects. • Lead industrialization of minor news development and contribute with competence to other new developments. Knowledge about Total Quality Management - University degree in Engineering or correspondingPrevious experience as Process or Production Engineer in manufacturing PreferredExperience of industrial production conditions and Lean manufacturing Contact Michael Panter for more details: mpanter@bachrachgroup.com

Job DescriptionDescription: We’re looking for a Quality Assurance Engineer Director who is a key member of the Quality Assurance unit within a pharmaceutical manufacturing environment. This role is responsible for technical leadership and enhancement of quality system activities including but not limited to, quality event investigations (deviations, complaints, non-conformances, and OOS), protocol writing (reworks and reprocessing), Annual Product Reviews, Stability Protocol and Report, Risk Assessments and CAPAs. The Quality Assurance Engineer Director oversees a team that applies engineering, analytical, and risk-based thinking to identify systemic issues, improve process robustness, and strengthen inspection readiness. • Job Type: Full-Time, • Location: Hauppauge, NY, • Level: Director, • Works Hours: Monday – Friday, 8:00AM – 4:00PM EST, • Pay Range: $125,000 - $150,000 per year, depending on experience and level, • Start Date: ASAP What makes this role exciting • This role sits at the intersection of quality, leadership, compliance and impact, • Define quality engineering strategies and lead cross-functional teams, • Review advanced analytics and help modernize manufacturing systems, • Serve as the subject matter expert on data aggregation and analysis for the company’s annual product review, continuous process verification and stability programsRequirements: Responsibilities: Include, but are not limited to: · Leads a team that author complex quality event investigations (deviations, complaints, non-conformances, and OOS), protocols (reworks and reprocessing), risk assessments and CAPAs. · Apply structured problem-solving methodologies (e.g., lean and six-sigma, DMAIC, root cause analysis, FMEA, fishbone, 5-Why) to drive high-quality, defensible conclusions. · Ensure all documentation meets cGMP, FDA, EMA, and internal quality standards, with a focus on clarity, logic, and inspection-ready narratives. · Review and challenge investigation content prepared by cross-functional teams to elevate overall quality and consistency. · Drive the development of robust, risk-based CAPAs that address true root causes rather than symptoms. · Assess CAPA effectiveness and sustainability; identify trends and opportunities for system-level improvements. · Coach and mentor Quality Engineer and related QA staff by modeling industry standard investigation practices. · Analyze trends across quality vents to identify systemic risks, recurring failure modes, and opportunities for process improvement. · Support continuous improvement initiatives by translating quality data into actionable insights. · Contribute to the design or enhancement of quality processes, templates, and tools to improve investigation quality and efficiency. · Serve as a thought partner to operations and technical teams during issue resolution and change management activities. · Act as a trusted QA partner to external customer and internal departments including Manufacturing, Packaging, Engineering, Technical Operations, Accounts Management, and Supply Chain. · Provide risk-based quality input to support sound business decisions while maintaining regulatory compliance. · Support inspection readiness activities, including responses to regulatory questions related to investigations and CAPAs. · Complete internal audits and support external audits of CPC operations.

Job Description K&A Power Group – is a privately held engineering firm delivering worldclass technical expertise and engineering excellence to power utility and industrial clients across the United States, Asia, the Middle East, and Africa. We provide comprehensive consulting, engineering and design, program and project management, construction management, and EPC services, specializing in substation, transmission, distribution, and distributed energy resources. We pride ourselves on attracting and developing top talent, building a culture of excellence, and building meaningful, long-term relationships with our employees, clients and communities, wherever they are in the world. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled [Position Name] to join our team at K&A Power Group in [Location]. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Field Support to Resolve Problems – Being Proactive, • Must do Reporting – Weekly Report, Monthly Reports, tracking of weekly PayId’s completed., • Monitor Schedule - Look Ahead vs. PM, • Attend the contractor’s Safety, Environment and Quality meetings; provide a tip in the onsite meeting., • Maintain and update as needed the onsite H&S, Environment and Quality project binder., • Be organized, and document all project progress to provide a good paper trail, • Review contractor invoices and schedules and provide feedback., • Conduct weekly project progress meeting. Request the contractor two week look ahead schedule at each weekly meeting., • Present onsite when work is being performed (make frequent observation of contractor’s activities)., • Immediate notification to PM of all problems or foreseeable issues throughout construction, or any complaint presented by the general public., • Coordinate Material delivery between Customer Stockroom, and Contractor., • Inspect all project related construction material for damage and completeness for the project execution., • Inspect work in progress to ensure that workmanship conforms to specifications, quality and adherence to construction schedules., • Facilitate resolving construction problems, discrepancies, procedures, and methods by working with engineering personnel, inspectors, contractors and suppliers. Must have strong communications skills., • Minimize Change Orders. Support Project Manager to review any requested Change, • Orders/Notices or other claims submitted by Construction Contractors which relate to additional payments, schedule adjustments or other modifications to the Project, and make such recommendations to the PM regarding the legitimacy of such claims and review the, • Construction Contractor’s proposed mitigation., • Review and understand the project documentation and any related documentation and provide input to enhance the constructability of the Project, taking into account schedule, cost and quality considerations., • Maintain a daily on-site as-build project plans., • Continuously communicate (written and verbally) with the associated PM., • Adhere to company policies, programs and procedures as well as Critical Infrastructure, • Protection (CIP). Ensure all requirements are maintained throughout the project execution, • Promote a proactive safety culture by encouraging open communication, reporting unsafe conditions, and suggesting improvements to safety practices., • Diligently ensure compliance with safety regulations, conducting safety inspections, and identifying potential hazards to mitigate risks and maintain a safe working environment for all personnel. What we’re looking for: • Minimum of five (5) years’ experience in progressive related electric utility industry experience, with transmission facilities construction management, • Two (2) years of college is preferred, • Construction Project Engineer Background Preferred, • Distribution line work experience required, • MS Suite Required – with high competency in MS Excel, • Knowledge of NRA clearances and switching orders would be beneficial, • Applicants should have the knowledge, experience and skills needed to review project plans, specifications, contract enforcement, and applicable technical standards, OSHA and other regulatory statutes., • Detailed work experience in electrical Utility transmission UV/OV & civil construction, • Must have current US Work authorization and valid US Driver License in good standing, • Minimum of 5 years of supervisory capacity experience, • Knowledge of GPS Systems & knowledge of SAP are preferred, • Ability to read and interpret specifications and drawings and convey interpretations to contractors, • Ability to investigate and solve construction problems in a timely manner with minimum dependence on others, • Computer and Administrative skills, • Strong verbal, written and interpersonal communication skills, • Must be able and willing to attend training in E-STAR/CONVEX (switching and tagging)., • Initiate distribution outage requests for project work through E-STAR and/or CONVEX. Pay Range $40—$46/an hour Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with company match), • Lifestyle Spending Account (LSA), • Paid Parental Leave after 12 months of employment, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program), • Parking and Transit Reimbursement, • Pet Insurance Check out our career page for more information! The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job DescriptionManufacturing Engineer Location: Hauppauge, NY Schedule: Onsite – Monday through Friday Employment Type: Permanent Compensation: $90,000 – $125,000 (based on experience) Position Overview We are seeking an experienced Manufacturing Engineer to support a growing engineering organization that is evolving into a hybrid team responsible for manufacturing methods, operations, and tooling support. This role focuses on developing detailed manufacturing documentation and driving methodized production for military mechanical and structural components in a highly regulated aerospace and defense environment. This position is best suited for a hands-on manufacturing engineer who can quickly interpret customer specifications, define robust manufacturing methods, and ensure accurate documentation is executed on the shop floor. Key Responsibilities • Review customer specifications, drawings, and technical data packages to define manufacturing methods, • Create clear, detailed operation sheets and assembly instructions to support shop-floor execution, • Perform manufacturing methodizing for mechanical parts, including routings, processes, and work instructions, • Support tooling design, including identifying tooling needs and collaborating with machinists and tool & die teams, • Interface with Quality to address nonconformances and support Requests for Variance (RFVs), • Communicate with government and customer technical representatives to clarify technical requirements, • Collaborate directly with production teams during first article and initial production runs to validate and refine methods, • Ensure manufacturing documentation is accurate, compliant, and properly released to the shop floor, • Utilize ERP systems for contract takeoff, routings, and manufacturing data management, • Support continuous improvement initiatives focused on quality, efficiency, and repeatabilityRequired Qualifications (Must Have), • Minimum 3–5+ years of manufacturing engineering experience (3 years considered if highly qualified), • Demonstrated ability to create operation sheets and assembly instructions (most critical skill), • Strong understanding of manufacturing processes for mechanical parts and assemblies, • Experience with manufacturing methodizing and shop-floor support, • ERP system experience within a manufacturing environment, • Ability to work closely with production personnel and support first production runs, • Strong attention to detail and documentation disciplinePreferred Qualifications (Nice to Have), • Aerospace and/or defense manufacturing experience (strongly preferred), • Familiarity with AS9100 and ISO 9001 quality systems, • Tooling design experience or close collaboration with tooling and machining teams, • Experience working to detailed military or aerospace customer specifications, • Continuous improvement experience in a production environmentEducation, • Bachelor’s degree in Engineering preferred, • Candidates without a degree may be considered with 10–15 years of directly relevant experienceWork Environment, • 100% onsite role located in Hauppauge, NY, • Flexible start time between 6:30 AM and 8:30 AM (manager discretion), • Privately owned manufacturing organization (~100 employees), • Collaborative culture with close interaction between engineering, quality, and production teams, • Facilities include both mechanical manufacturing and large, close‑tolerance composite structuresIdeal Candidate Profile, • A true manufacturing engineer (not repair-focused and not R&D-heavy), • Comfortable quickly getting into detailed specifications and production methods, • Aerospace and defense background with exposure to major A&D programs, • Strong mechanical engineering foundation with tooling and shop-floor collaboration experienceJob Type & Location This is a Permanent position based out of Hauppauge, NY. Pay and Benefits The pay range for this position is $90000.00 - $125000.00/yr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Hauppauge,NY. Application Deadline This position is anticipated to close on Jun 1, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionSe Engineer Location: Hauppauge, NY Schedule: Onsite – Monday through Friday Employment Type: Permanent About the role The Mechanical Engineer plays a key role in the design, development, and testing of complex mechanical components, systems, and equipment for both new and existing products. This position leads advanced mechanical engineering initiatives, mentors and trains engineering staff, supports continuous improvement, and researches and recommends new design tools, technologies, and engineering processes. Responsibilities • Complete the product design, analysis, and development of mechanical components and systems, including detailed assembly drawings, part drawings, and engineering documentation from concept through manufacturing release., • Conduct FEA (Finite Element Analysis) and FMEA (Failure Mode and Effects Analysis) and incorporate customer feedback to strengthen product design and development., • Develop technical documentation and electronic help files that support new product introductions and engineering workflows., • Train and mentor engineers, provide technical leadership, and manage one or more engineering projects., • Research emerging mechanical engineering technologies, recommend solutions to management, and oversee implementation of new tools and processes., • Review, evaluate, and continuously improve departmental engineering processes and policies, with a focus on design optimization and development efficiency., • Create and present multiple mechanical design concepts to cross‑functional engineering teams and stakeholders., • Collaborate with Document Control to produce comprehensive design packages, including 2‑D drawings, Bills of Materials (BOMs), and Engineering Change Orders (ECOs); ensure timely updates to documentation for existing products., • Ensure system and product quality by designing effective testing methodologies and validation procedures., • Test and evaluate finished products and system capabilities to verify performance and compliance with specifications., • Confirm proper fabrication, assembly, and installation processes by reviewing manufacturing workflows and quality checkpoints., • Develop and execute testing and validation plans, ensuring products meet reliability, performance, and safety requirements., • Prepare detailed engineering reports by collecting, analyzing, and summarizing mechanical design data, performance metrics, and product trends., • Analyze existing designs for engineering improvements, optimization opportunities, and troubleshooting., • Research various mechanical engineering challenges, including component functionality, manufacturing processes, and materials., • Verify that all design and project objectives comply with customer requirements and engineering standards. Qualifications • Strong project management and engineering leadership., • Skilled in mechanical design, prototyping, and evaluation of injection‑molded plastics, metal stampings, die castings, and sheet‑metal parts., • Creative, solution‑oriented problem solver for complex mechanical systems., • Able to make independent engineering decisions with minimal guidance., • Proficient in using engineering economic analysis to support technical and cost‑driven decisions. Education & Experience • Bachelor’s degree in Mechanical Engineering required, • 5+ years of mechanical engineering experience, • Strong background in mechanical design, high‑volume manufacturing, and automated or manual assembly processes, • Proficient in 3D CAD and technical drafting (SolidWorks preferred), • Experience with PCB layout and electronics packaging, • Knowledge of regulatory compliance and validation testing methods, • Experience designing consumer products and electro‑mechanical devices, • Skilled in advanced drafting terminology and symbols Travel • Up to 15%, including some international travel requiredJob Type & Location This is a Permanent position based out of Melville, NY. Pay and Benefits The pay range for this position is $90000.00 - $125000.00/yr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Melville,NY. Application Deadline This position is anticipated to close on May 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Overview We are seeking a Manufacturing Engineer to support production operations for high-precision aerospace components. This role will focus on improving manufacturing processes, driving efficiency, and ensuring products meet strict aerospace quality and regulatory standards. Key Responsibilities • Develop, implement, and improve manufacturing processes for aerospace components and assemblies, • Drive continuous improvement initiatives focused on cost, quality, and production efficiency, • Create and maintain work instructions, process documentation, and standard operating procedures, • Collaborate with design engineering to ensure manufacturability (DFM/DFA), • Support new product introductions (NPI) from concept through full-scale production, • Troubleshoot production issues and implement corrective actions, • Work closely with quality teams to meet AS9100 and customer compliance requirements, • Identify and implement tooling, fixturing, and automation solutions, • Analyze production data and recommend process improvements Qualifications, • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or related field, • 3-7+ years of manufacturing engineering experience (aerospace preferred), • Experience in machining, assembly, or fabrication environments, • Familiarity with lean manufacturing, Six Sigma, or continuous improvement methodologies, • Knowledge of GD&T and engineering drawings, • Experience working within AS9100 or similar regulated environments, • Strong problem-solving and cross-functional communication skills Pay Details: $90,000.00 to $130,000.00 per year Search managed by: Andrew Khanija Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description The Supplier Quality Engineer will be responsible for executing and expanding on key initiatives inside of the supplier quality organization. The Supplier Quality Engineer will be responsible for executing various supplier quality engineering related activities such as Compliance, Process, and Product Audits, MRB, FAI Witnessing, Review and Sign off, Problem Solving, Corrective and Preventive Actions, Supplier Performance Reporting and other Quality Improvement Activities. Job Responsibilities: • Assess suppliers manufacturing and quality processes through performing supplier audits following various standards depending on the type of audit. Audits may include but not limited to the following: AS9100 Compliance Audits, special processes, APQP audits, process, and product audits., • Lead and/or support MRB activities to achieve optimal disposition of non-conforming material and ensure that adequate corrective actions are implemented., • Perform on-site supplier visits for root cause analysis and verification of corrective actions of supplier quality issues, • Promote and facilitate the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke, and Process Failure Mode and Effects Analysis (PFMEA), • Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers., • Support suppliers in the evaluation of existing manufacturing or business processes, identification of opportunities for improvement, and development of solutions to optimize supplier performance using various problem-solving techniques., • Provide technical guidance and assistance to suppliers to solve process and product quality issues and improve internal and outgoing quality performance., • Develop and maintain detailed and accurate reporting of supplier performance and quality improvement progress. Report weekly and monthly on supplier progress to meet customer expectations., • Undertake special projects as required, • Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance., • Communicate efficiently and effectively with all stakeholders to ensure timely and effective responsiveness to abnormalities. Required Skills • 8+ years of hands-on experience as a Quality Engineer in an Aerospace Manufacturing Environment, • 5-8 years of FAI experience with AS9102 (FAI) standards at a quality engineering level., • Strong understanding of various Engineering Processes, Standard Drawings Conventions, Interpreting Drawing, Specifications, and GD&T, • 5-8 years' experience hands-on experience with the ISO9001 and AS9100 Quality Management Systems Processes, especially in Production, Quality, and logistics, • Knowledge of, (or hands-on experience preferred), with FAA, EAR, and ITAR standards and regulations, • Experience leading customer audits, • Strong verbal, written and communication skills, • Project management, time management, problem solving and organization, • Ability to work as an effective team member and lead other team members Additional Desired Skills: • Prior practical experience and implementation of Quality Engineering tools and systems such as: DOE, FMEA, SPC, RCCA, APQP, PPAP, controls plans, material control, process control, systems performance, product evaluation, MSA, metrology, automated measurement, and software is preferred. General Requirements • Ability to pass background and drug screen, • Valid drivers license and auto insurance required., • Vision exam is required prior to hire. Requirements are as follows:, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist or other professionally recognized person. The following requirements shall apply., • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates, • US Citizenship Required: TRIGO ADR AMERICAS can restrict hiring to US Citizens when government contracts require us to do so. 8 U.S.C. § 1324b(a)(2)(C). Additional Qualifications (Preferred): • Bachelor's degree from an accredited college in a technical discipline, (i.e., Industrial Engineering, Mechanical Engineering, Quality Management, etc.), • ASQ or equivalent professional certifications such as CQE, CQT, CQA, CMQ, CSQP …etc., • Six Sigma Green Belt or Black Belt Certification. WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • Requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Pay Range $70,000-105,000 Annually. Please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR bG0xIH5Pqj

Job Description$85,000 - $115,000 + VIP Bonus Vertafore is a leading technology company whose innovative software solutions are advancing the insurance industry. Our suite of products provides solutions to our customers that help them better manage their business, boost their productivity and efficiencies, and lower costs while strengthening relationships. Our mission is to move InsurTech forward by putting people at the heart of the industry. We are leading the way with product innovation, technology partnerships, and focusing on customer success. Our fast-paced and collaborative environment inspires us to create, think, and challenge each other in ways that make our solutions and our teams better. We are headquartered in Denver, Colorado, with offices across the U.S., Canada, and India. As a Software Engineer II, you will be working within an energetic team implementing solutions that support a wide range of customers. You will develop high quality applications. You will also have opportunities to bring your creative ideas to the table to deliver better solutions to our users. If you love technology, have a passion for software, are hungry to learn, and are driven to contribute to a world-class team of engineers, you’re who we are looking for. Core Requirements and Responsibilities: Essential job functions included but are not limited to the following: • Contributes independently, • Responsible for developing new features and supporting/bug fixing existing features, • Unit and integration testing, • Debugging issues across the whole stack - OS, DB, applications, and network, • Continued ownership of technical growth including: product and business knowledge, problem solving skills, technical knowledge, process knowledge, • Closely follow industry trends and the open source community Knowledge, Skills and Abilities: • Ability to make decisions in their area of responsibility that help maintainability, reuse, security, and performance, • Ability to diagnose issues and provide solutions for multiple functional and technical areas within a product, • Can independently frame problems and perform relevant research, • Can communicate clearly to explain design decisions, • Self-motivation, • Excellent problem-solving, • Drive to improve, personally and professionally, • Collaboration with peers Qualifications: • Bachelor’s degree in Computer Science (or related technical field) or equivalent practical experience, • Experience with Agile software development, • Have a passion for innovating and crafting clean code, • 2-3 years of professional experience with C#, • 2-3 years of professional experience with MSSQL, • Experience with User Interface Design, • Understands the value of unit testing, • Enjoy solving problems through the entire application stack, • Are interested and capable of learning other programming languages as needed. Additional Requirements and Details: • Travel required up to 10% of the time., • Occasional lifting and/or moving up to 10 pounds., • Frequent repetitive hand and arm movements required to operate a computer., • Specific vision abilities required by this job include close vision (working on a computer, etc.)., • Frequent sitting and/or standing. THE VERTAFORE STORY Over the past 50 years, Vertafore has advanced the entire insurance distribution channel with the best software solutions in the industry. Today, we’re proud to say hundreds of thousands of Vertafore users rely on our solutions to write business faster, reduce costs, and fuel growth by increasing collaboration and streamlining processes. Vertafore leads the industry with secure, cloud-based mobile products that provide superior reporting and analytics, delivering actionable insight— right when customers need it most. We partner with other leading technology companies to deliver comprehensive solutions to improve the way our customers do business and serve their customers. The Vertafore Way Insurance is about relationships, and technology should make those relationships stronger. That’s why, at Vertafore, it’s our mission to transform the way the industry operates by putting people at the heart of insurance technology. By focusing on our customers, becoming better every day, and delivering results you can see, we provide the level of trust and security that insurance is all about. · Bias to Action: We're united by an innate drive to take action and make a difference in the technology and insurance spaces. · Win Together: We work together as one team, showing empathy and respect along the way. · Show Up Curious: We work to challenge one another to push boundaries and think beyond the box. · Say It, Do It: We honor every one of our commitments because integrity is important to us. · Customer Success is Our Success: We cultivate authentic relationships and follow up by actively listening to their needs. · We Love Insurance: We appreciate the impact insurance has on the world. Is this role not an exact fit for you? Keep an eye on our Careers Page for other positions! Vertafore is a drug free workplace and conducts preemployment drug and background screenings. The selected candidate must be legally authorized to work in the United States. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Vertafore strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law. We do not accept resumes from agencies, headhunters, or other suppliers who have not signed a formal agreement with us.

Job Description The Supplier Quality Engineer will be responsible for executing and expanding on key initiatives inside of the supplier quality organization. The Supplier Quality Engineer will be responsible for executing various supplier quality engineering related activities such as Compliance, Process, and Product Audits, MRB, FAI Witnessing, Review and Sign off, Problem Solving, Corrective and Preventive Actions, Supplier Performance Reporting and other Quality Improvement Activities. Job Responsibilities: • Assess suppliers manufacturing and quality processes through performing supplier audits following various standards depending on the type of audit. Audits may include but not limited to the following: AS9100 Compliance Audits, special processes, APQP audits, process, and product audits., • Lead and/or support MRB activities to achieve optimal disposition of non-conforming material and ensure that adequate corrective actions are implemented., • Perform on-site supplier visits for root cause analysis and verification of corrective actions of supplier quality issues, • Promote and facilitate the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke, and Process Failure Mode and Effects Analysis (PFMEA), • Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers., • Support suppliers in the evaluation of existing manufacturing or business processes, identification of opportunities for improvement, and development of solutions to optimize supplier performance using various problem-solving techniques., • Provide technical guidance and assistance to suppliers to solve process and product quality issues and improve internal and outgoing quality performance., • Develop and maintain detailed and accurate reporting of supplier performance and quality improvement progress. Report weekly and monthly on supplier progress to meet customer expectations., • Undertake special projects as required, • Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance., • Communicate efficiently and effectively with all stakeholders to ensure timely and effective responsiveness to abnormalities. Required Skill: • 8+ years of hands-on experience as a Quality Engineer in an Aerospace Manufacturing Environment, • 5-8 years of FAI experience with AS9102 (FAI) standards at a quality engineering level., • Strong understanding of various Engineering Processes, Standard Drawings Conventions, Interpreting Drawing, Specifications, and GD&T, • 5-8 years' experience hands-on experience with the ISO9100 and AS9100 Quality Management Systems Processes, especially in Production, Quality, and logistics, • Knowledge of, (or hands-on experience preferred), with FAA, EAR, and ITAR standards and regulations, • Experience leading customer audits, • Strong verbal, written and communication skills, • Project management, time management, problem solving and organization, • Ability to work as an effective team member and lead other team members Additional Desired Skills: • Prior practical experience and implementation of Quality Engineering tools and systems such as: DOE, FMEA, SPC, RCCA, APQP, PPAP, controls plans, material control, process control, systems performance, product evaluation, MSA, metrology, automated measurement, and software is preferred. General Requirements: • Ability to pass background and drug screen, • Valid driver's license and auto insurance required., • Vision exam is required prior to hire. Requirements are as follows:, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist or other professionally recognized person. The following requirements shall apply., • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates, • US Citizenship Required: TRIGO ADR AMERICAS can restrict hiring to US Citizens when government contracts require us to do so. 8 U.S.C. § 1324b(a)(2)(C). Additional Qualifications: • Bachelor’s degree in Statistics, Mathematics, Computer Science, or a related field., • 4+ years of Microsoft Office products and applications experience, • Proven expertise in SQL, Tableau and Python, • Proven experience pulling and analyzing data for root cause analysis and drive process improvement initiatives., • Engineering/other technical positions: and a minimum of 2 years of prior relevant experience, • 4+ years of Expertise in SQL, Tableau and Python, • Proven experience as a Data Analyst or Quality Engineer, with a focus on data analysis and quality improvement WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Pay Range $70,000-$100,000, please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Company DescriptionTRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications. TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans. NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.\r\n\r\nThank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.\r\n\r\nTRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.\r\n\r\nNOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,

Job Description On-Site, Hauppauge, NY Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Job Description We are seeking a highly motivated and technically strong Application Engineer to play a strategic technical role expanding and supporting the adoption of Narda Safety Test Solutions (Narda STS) product lines throughout the United States. Narda STS, based in Germany, is a global leader in RF test & measurement, EMF safety, spectrum monitoring, interference hunting, and EMC/EMI analysis. This position focuses on expanding Narda’s presence across key U.S. markets, including military and defense, government agencies, aerospace, telecommunications, and industrial customers. In this role you will act as the technical authority for Narda products in the U.S., providing end-to-end support, from pre-sales consulting and product demonstrations to application development and post-sales assistance. A critical part of this role includes collaborative technical engagement and brainstorming with customers, including military program offices, system integrators, and field engineers, to help identify mission requirements, design technical use cases, and propose innovative solutions using Narda STS equipment. Key Responsibilities Customer & Applications Engineering • Serve as the primary technical expert for Narda STS equipment including EMF meters, spectrum analyzers, RF interference detectors, RF direction finders, and spectrum monitoring systems., • Conduct product demonstrations for commercial, government, and U.S. military customers (onsite, virtual, and at trade shows)., • Work with customers to design test methods, solve operational challenges, and optimize their use of Narda products., • Engage in brainstorming sessions with defense and enterprise clients to develop application concepts, system configurations, and mission-specific use cases., • Provide Tier 1/Tier 2 technical support and coordinate with engineering teams in Germany for advanced issues., • Create and deliver training, application notes, usage guides, and technical presentations. Sales Engineering & Business Development • Support sales initiatives by identifying customer needs and recommending the proper Narda STS solution set., • Prepare customized proposals, technical quotes, and configuration packages., • Support federal and military acquisition processes including RFP/RFQ responses., • Build strong relationships with key accounts in the defense, aerospace, telecom, and industrial sectors., • Participate in field evaluations, pilot programs, and product qualification activities with military stakeholders. Market & Product Insight • Collect customer feedback to help guide new product features, development, and roadmap discussions with Narda STS headquarters., • Maintain expertise in RF measurement, EMF regulations, spectrum-monitoring practices, and military-relevant standards., • Track market trends and competitive products to support strategic planning. Travel Requirements • Frequent domestic travel for customer visits, demonstrations, training sessions, field support, and events., • Occasional travel to Germany for product training and technical alignment with Narda STS teams. Qualifications Required • Bachelor’s degree in Electrical Engineering, RF Engineering, Physics, Communications Engineering, or equivalent technical experience with RF systems., • 2+ years in RF test & measurement, spectrum analysis, EMC/EMI, or similar technical field., • Strong understanding of RF concepts (modulation, spectrum behavior, antennas, interference, propagation)., • Proven customer-facing experience in pre-sales engineering, applications support, system integration, or field engineering., • Ability to lead technical discussions and explain complex concepts clearly., • Active U.S. Government security clearance preferred; candidates must be eligible to obtain and maintain a government clearance. Preferred • Experience supporting U.S. military customers, defense contractors, or federal agencies., • Experience with Narda STS or comparable RF instrumentation (Keysight, Rohde & Schwarz, Anritsu, Wavecontrol, etc.). Personal Attributes • Strong technical curiosity and problem-solving abilities., • Comfortable brainstorming technical ideas and application scenarios with customers., • Self-starter with excellent organizational and communication skills., • Ability to work independently in a remote environment while coordinating across time zones. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Bachelor’s Degree in Engineering discipline and minimum 4 years of developing embedded software-based engineering solutions. L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers’ mission-critical needs. The Infor

Consult with electrical engineers and other engineering staff to evaluate interface between hardware and software and operational performance requirements of the overall system. Work closely with an Agile team of experienced software engineers on projects that involve the development and analysis of

No customer service representative experience required.

We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel.

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related engineering or science field and a

Qualifications 5+ years of construction project management experience Bachelor’s degree in construction management, civil engineering, or a related field preferred Strong leadership, organizational, and communication skills Proficiency with MS Excel and project documentation Detail-oriented with t

The L3Harris space superiority and imaging systems engineering department is seeking a systems engineer to join our team and support programs that we have recently won. Utilize systems engineering tools and methodologies to support model-based systems engineering (MBSE). Professional experience in s

Customer service representative agent experience not required. Remote Work From Home Customer Service Representative Agent - Part Time Market Research Panelists Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Market Research assignments.

Utilize systems engineering tools and methodologies to support model-based systems engineering (MBSE). The L3Harris space superiority and imaging systems engineering department is seeking a systems engineer to join our team and support programs that we have recently won. Professional experience in a

Customer service representative agent experience not required. Remote Work From Home Customer Service Representative Agent - Part Time Market Research Panelists Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Market Research assignments.

The L3Harris space superiority and imaging systems engineering department is seeking a systems engineer to join our team and support programs that we have recently won. Utilize systems engineering tools and methodologies to support model-based systems engineering (MBSE). Our employees are unified in

Customer service representative agent experience not required. Remote Work From Home Customer Service Representative Agent - Part Time Market Research Panelists Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Market Research assignments.

Customer service representative agent experience is not necessary. If you are a customer service representative agent or someone just looking for a flexible part time remote work from home job, this is a great way to supplement your income. Customer service representative agent experience not requir

The successful candidate will support a highly motivated engineering team in defining, designing, implementing, documenting, testing and sustaining security solutions on National Security Systems, or other systems engineered for our government customers, using current standards within National Insti

Quality Specialist (QA/QC – Inspection & Documentation).A leading technology solutions provider supporting government, education, and commercial clients, with a strong presence in aerospace/defense manufacturing is seeking a hands-on.This is a full-time, on-site position.ISO and AS9100 quality

Pro Customer Service/Sales Team members build and maintain professional relationships with Pro customers, proactively drive sales by leveraging product knowledge, loyalty programs, and tailored recommendations, while providing outstanding service based on unique project needs. The Home Depot Pro Cus

Customer service representative agent experience not required. Remote Work From Home Customer Service Representative Agent - Part Time Market Research Panelists Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Market Research assignments.

The Customer Service/Sales position types may include Department Sales, Lead Generator, Pro Account Sales, Sales Specialist, Special Services, and Customer Order Specialist. Position Purpose: Customer Service/Sales associates provide fast, friendly service by actively seeking out customers to assess

Customer service representative agent experience not required. Remote Work From Home Customer Service Representative Agent - Part Time Market Research Panelists Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Market Research assignments.