Trabajos customer engineer en Rochester, New YorkCrear alertas

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job Description Title: Service Engineer Apprentice Reports to: Service Manager, (Assigned Technical Center) Location: DMG MORI USA, Technical Center Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 75% Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Essential Job Functions: Service Apprentice will participate in training and development where the incumbent learns to repair, install and move all DMG MORI machines. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Complete all Classroom, factory training and online classes, and pass with 80% or higher scores., • Shadow Service Engineers on service calls, which require traveling with the Service Engineer to customer sites, • Learning through observation, while assisting Service Engineers on the call., • Progression in the apprentice program is competency based, participants are generally enrolled for 2 to 3 years before they receive certification and promotion to Service Engineer., • High School diploma or GED., • Recent mechatronics program graduate or related field experience preferred., • Demonstrated mechanical, pneumatic, hydraulic, electrical, or electronic, aptitude., • Experience in CNC manufacturing, maintenance, a related field, a journeyman certificate and/or extensive experience (5+Years) in machine/manufacturing maintenance or related field - such as military maintenance training and experience preferred., • Analytical/problem solving abilities to define, troubleshoot, and repair a machine without assistance, • High interpersonal and social skills required to successfully complete assignments in stressful situations, • Ability to communicate professionally and create positive relationships with customers, • Verbal skills to effectively communicate varying levels of internal technical staff and customers, • Time management skills to plan work and travel schedules to minimize downtime/nonproductive time, • Adaptability to abrupt changes in work schedule and travel arrangements, • Proven written skills and discipline to complete required Technical documents and Reports in a timely fashion., • Ability to travel domestic and/or internationally to visit customer locations and/or trade shows, • Ability to follow complex written and verbal instructions correctly., • Other duties as assigned. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job Description Overview CTG's long-standing Fortune 500 client of over 15 years has a W2 contract assignment for a Quality Engineer II. Type: Contract Job Title: Quality Engineer II Location: Woodland, CA Candidates must be able to commute and work onsite in Woodland, CA Pay Rate: $44.43 to $58.24/hour Work Hours: M–F 8am–5pm Education: Bachelor’s degree in Science, Engineering, Bioengineering, or related field (Chemistry or Biology preferred) Description The Quality Engineer II will develop and support all Quality Management System (QMS) and Regulatory Affairs (RA) activities in alignment with site quality goals and metrics. This role is responsible for new product setup, quality project management, and ensuring regulatory compliance for serum products. The position will ensure compliance with in-house and external specifications and standards such as cGMPs, 21 CFR 820, ISO 13485, and Quality System Procedures. Requirements • Ensure compliance with new and changing regulations impacting products and processes, including QSR’s and global import/export regulations, • Manage new product setup and related projects, • Support supplier audits as needed, • Collaborate with USDA on regulatory compliance, including approvals, import/export compliance, traceability, quarantine, safety testing, and affidavits, • Serve as a resource for customer regulatory and technical inquiries, • Maintain ISO 13485-based quality system, • Implement and manage CAPA (Corrective and Preventive Actions) and problem resolution, • Lead quality documentation, nonconformance reports, inspection activities, and product disposition, • Review and revise procedures, specifications, and forms to maintain and improve the QMS, • Act as the Quality Help Desk and customer complaint contact for problem resolution, questionnaires, certificates, and surveys, • Perform internal audits in support of internal requirements, 21 CFR 820, and ISO 13485 compliance, • Represent the organization in customer quality audits, supplier quality audits, and regulatory inspections, • Conduct investigations and analyses to resolve quality issues, • Collaborate with cross-functional teams to support quality system implementation, • Create new product master files to meet customer and quality system requirements, • Ensure compliance with company policies and departmental procedures, including product performance verification, problem investigation, process improvements, and non-conformance prevention, • Provide training on quality systems and applicable regulations, • Track and trend QMS metrics, • Perform other duties as assigned Required Qualifications Education • Bachelor’s degree in Science, Engineering, Bioengineering, or related field (Chemistry or Biology preferred) Qualifications • Minimum 3 years’ experience in Quality or Regulatory, preferably in medical device, pharmaceutical, or biotechnology industries, • Strong knowledge and application of Quality Systems Regulations 21 CFR 820 and ISO 13485, • Ability to develop, update, and train on SOPs, • Experience performing internal/external audits, • Ability to monitor QMS activities, including Change Control, CAPA, Complaints, and Nonconforming Materials/Products, • Problem-solving skills for investigations and root cause analysis, • Experience with Continuous Improvement, Lean, or Six Sigma Desired Qualifications • SAP, EtQ, and/or PeopleSoft experience, • Statistical analysis experience, • Project management experience, • Knowledge of animal by-product import/export regulations, • Background in animal health, virology, immunology, or epidemiology Soft Skills • Strong organizational, time management, and attention to detail skills, • Excellent interpersonal and communication abilities, • Ability to work independently and influence others in a collaborative team environment Additional Information • No third party resumes will be accepted, • Drug testing and/or other employment-related inquiries may be conducted, • CTG will consider for employment-qualified applicants with criminal histories in a manner consistent with the requirements of all applicable local, state, and federal laws, • All interested individuals MUST be able to work on a W2 Tax basis (no C2C or third party vendors), • CTG is an Equal Employment Opportunity employer, • CTG is an E-Verify Company To be considered for this opportunity, please apply directly through our website by clicking the link below or email your Word version resume and salary expectations to . The expected base salary for this position ranges from $44.43 to $58.24/hour. Salary offers are based on relevant skills, training, experience, education, market factors, and applicable licensure or certifications. In addition to salary, a competitive benefits package is offered.

Job DescriptionDescription: About WeTheHobby WeTheHobby is a fast-growing sports entertainment company bringing fans together through live-streamed breaks, eCommerce, and real-time community experiences. Headquartered in Rochester, NY, we’re building platforms that connect collectors and fans worldwide. We value creativity, innovation, and collaboration—and we’re looking for builders who want to make an impact in one of the fastest-growing corners of sports entertainment. The Role We’re seeking a Senior Backend Engineer to design, build, and scale the systems that power our customer experience. In this role, you’ll focus primarily on coding and delivering high-quality features, while also mentoring teammates and contributing to architectural discussions that shape our platforms. What You’ll Do • Build & Scale Systems – Design, develop, and maintain backend services and APIs that support eCommerce, payments, and live streaming, • Hands-On Development – Spend the majority of your time coding, writing tests, and shipping features, • Mentor Teammates – Guide junior engineers on coding best practices, clean design, and maintainability, • Collaborate – Work with product, front-end engineers, and designers to deliver high-quality features, • Contribute to Architecture – Participate in architectural discussions and propose technical solutions, • Ensure Quality & Security – Champion testable, secure, and scalable code through best practices and code reviews, • Stay Current – Explore new tools and technologies to help improve performance, scalability, and developer productivity Requirements: What We’re Looking For Must-Haves • 5+ years of backend engineering experience, preferably with .NET, • Experience designing and implementing APIs and scalable systems, • Strong database skills (SQL and/or NoSQL), • Hands-on experience with AWS (or another major cloud platform), • Excellent problem-solving and collaboration skills Nice-to-Haves • Experience with GraphQL, SignalR, or event-driven systems, • Familiarity with front-end frameworks (React.js or similar) for better collaboration, • Background in eCommerce, payments, or streaming technologies, • Impact: Help design and build the backbone of our platform in a high-growth environment, • Ownership: Spend most of your time coding while also mentoring teammates and contributing to architecture, • Growth: Opportunity to work with cutting-edge technologies and expand your technical expertise, • Salary: $130,000 – $150,000 depending on experience and skills, • Benefits package including health, dental, vision, PTO, and more

Job DescriptionDescription: Job Title: Principal Optical Engineer Department: R&D – Optical Reports To: VP of Advanced Optics Work Location: Onsite-Hybrid Salary Range: $100,000 - $140,000 FLSA Status: Exempt Featured Benefits: Medical, Dental, Vision, 401(k), FSA/HSA, Patent Incentives, Tuition Assistance, PTO, Life & Long-Term Disability Insurance, and more. About Us: Founded in 1997, Vuzix (NASDAQ: VUZI) is a growing, dynamic company that specializes in the design, manufacture and sale of smart glasses and augmented reality (AR) technologies and products for the enterprise and consumer markets. Company products include wearable displays and computing devices that offer a portable, high-quality viewing experience for applications in augmented reality, digital information, utility, and entertainment. Position Summary: The Principal Optical Engineer will support R&D, new product development and production while directly reporting to the R&D/Optics group. It will be their responsibility to work within multidisciplinary teams to design, build and test optical mounting structures, alignment mechanisms and housings. They will be solely responsible for all reliability modelling and testing with respect to optical components and assemblies. This position will also support the functions of the R&D – Optical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Oversee test lab and provide optical engineering expertise., • Establish test procedures, processes, and documentation., • Review and organize test data., • Subject expert for geometric optics, LED illuminators, backlights, conventional micro-displays, collimators and concentrators, holographic systems, optical interference coatings, injection molding, lens design, and high precision optics design, fabrication and assembly., • Research and understand human factors and implement intelligent design choices for head mounted display systems., • Generate complete system documentation and provide input to technical proposals to effectively communicate designs and/or approaches to internal and external customers., • Validate system performance to prove the technical design through analysis, simulation, and laboratory testing., • Ensure proper procedures and methods are used by other members of the design team by providing a value-added quality review., • Independently develop and implement corrective action to product and procedural problems., • Communicate with the customer suppliers, and internal management as the technical expert on projects to effectively interface with all facets of decision-making personnel and customer management. To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Minimum of 8 years of detailed experience working in a product design environment., • Strong organizational, time management, and leadership skills; and the ability to successfully manage multiple tasks in a dynamic environment., • Familiarity with MS Project., • Familiarity with optical measurement techniques., • Must be able to demonstrate out-of-box thinking for unique problems and develop concepts into products., • Master’s degree in Optical Engineering, Physics or equivalent., • Familiarity with sequential and non-sequential programs like Zemax, Code V, etc. Travel: Travel including international travel up to 25%, if possible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job Description Title Quality Engineer Department Quality Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Engineer will be responsible for providing high level technical support for RPO’s QC Inspection area. Performs and trains others in QC test and inspection processes and makes decisions on product and process acceptability. Recommends appropriate test and measurement equipment and arranges for equipment calibration. May work in a cleanroom environment and low-light areas. Provides Quality Assurance technical support for all aspects of the RPO ISO 9001 quality management system, including evaluation of requests for quotation, setting up the QA support for new jobs, supporting existing jobs, records management, and document writing. Participates in internal quality audits, interacts with suppliers, customers, external auditors, and co-workers to provide support as needed. You will: · Explain and interpret ISO 9001 QMS requirements as they pertain to RPO and its products, processes and services · Explain and interpret optical and mechanical drawings, specifications, standards, purchase orders and contracts extracting the essential information for QA support and risk analysis · Cleaning, inspection and evaluation of product to specifications and requirements · Lead and participate in internal audits · Functions as auditor escort during external audits · Provide QA Engineering support for production, prototype and engineering activities including risk analysis, quoting, quality and test plans, inspection and testing, data gathering and analysis, sample submissions, performance reporting, project close-out, etc. · Selection and calibration of inspection and test equipment, working with equipment and calibration suppliers · Assess gage system status and adequacy · Make final decisions on product acceptability · Review, disposition and process RMAs. · Lead and participate in DOEs, FMEAs, DFMs, DVT, DFM, Lesson’s Learned and other activities · Train others in the use of inspection and measuring equipment, testing, SPC and other subjects · Write inspection instructions and quality / test plans including test and measuring equipment usage procedures and procedures requiring customer approval · Perform / coordinate environmental, durability, reliability and other testing as needed · Assemble and submit FAI and other sample packages · Review and approve Supplier FAI and other sample Packages · Work with Supply Chain to improve and control RPO supply base · Issue, manage, validate and close CAPAs · Create, manage and participate in ECOs · Implement and manage RPO document control system · Interact professionally with Manufacturing, Sales, Purchasing, Engineering, customers, suppliers, and all other individuals as required · Identifies and recommends improvement opportunities · Other duties as assigned You have: · Familiarity with QC inspection equipment and techniques · Computer skills, including Microsoft Office. Minitab preferred · Ability to interpret optical and mechanical drawings, standards and specifications. · Familiarity with ISO 9001, AS-9100, AS9102, MIL-STD-810, MIL-PRF-13830, ISO 10-110 and other standards preferred. · Familiarity with control of government property preferred · Ability to use test equipment such as thermal, salt and humidity chambers and other test equipment preferred. · Understanding of APQP, PPAP, FMEA, DVT, DFM, DOE, Gage R&R, Measurement Analysis, SPC, Six Sigma, Lean Manufacturing, 5S, DMAIC, PDCA, FAI, etc. · Ability to work well with people · Self-starter, capable of working with very little direction · Good oral and written communication skills · Good Multi-Tasking skills · Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management. · Ability to apply advanced mathematical concepts. · 5 years’ experience in quality, manufacturing, optical or engineering fields. · A.A.S. in Quality, Engineering, Technology or Business discipline · B.S. Preferred · ASQ Certifications favorable You Are: · Results-Oriented: Motivated, hard-working and ready to level-up. · Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge. · Process Oriented: Well organized, demonstrating attention to detail. · Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude. · Accountable: Demanding the highest quality from yourself and team members. · Detail-Oriented: Have excellent time management and organizational skills. · A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. · A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: · Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus and see colors. May involve prolonged periods of magnified inspection (eye strain) • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. · Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) · Generally works in a clean environment and works to maintain the environment as such. · Safety Glasses are required · May require area specific safety training • This position works in a manufacturing environment. The noise level in the work environment is usually moderate-loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: · Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program. · Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans. · Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance. · Balance: 11 paid holidays, generous paid vacation and sick time · Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday-Friday 7am - 3:30pm

Job Description Job Title: Mechanical Design Engineer Reports To: Optics/Systems Engineering Manager Grade: 12 Summary We are seeking an experienced and innovative Mechanical Design Engineer to join our engineering team at a senior level. The successful candidate will lead the design, development, and testing of advanced mechanical components and systems, with a strong emphasis on research, development, and cross-disciplinary collaboration. This role requires demonstrated expertise in product development, project leadership, and the ability to mentor junior engineers, while working closely with manufacturing and quality teams to ensure designs meet performance, cost, and manufacturing objectives. Essential Duties and Responsibilities: • Lead complex analytical work in machine design, dynamics, fluid mechanics, and magnetics., • Oversee and create detailed mechanical designs using Creo CAD software; guide prototype development and ensure designs meet advanced functional, performance, and cost requirements., • Drive precision engineering initiatives, including flexure design, kinematic repeatability, optical mounting, and thermal management., • Identify and implement improvements to existing products by analyzing performance and reliability, incorporating feedback from production, customer service, and field data., • Conduct and supervise simulations, stress analysis, and physical testing to verify design performance; ensure compliance with relevant standards and regulations., • Manage and run test stands and machines, conduct experiments, and build engineering prototypes; oversee the execution of new product development prototype experiments for mechanical/electrical/thermal/fluid systems., • Utilize and train others on sophisticated metrology equipment, including laser position measurement, ball-bar motion equipment, rotation measurement, temperature, fluid flow, and pressure measurement devices., • Write and review concise test reports with justifiable conclusions and recommendations; present findings to cross-functional teams and leadership., • Collaborate with external suppliers and vendors to ensure materials and components meet required specifications; lead supplier development initiatives as needed., • Foster frequent communication and open brainstorming with team members; mentor junior engineers and interns., • Focus on research and development: Lead innovative research to develop new technologies and improve existing products. Collaborate with cross-functional teams to explore new ideas and methodologies. Drive R&D projects to advance technological capabilities and maintain a competitive edge in the industry. Education and/or Experience – Minimum B.S. in Mechanical Engineering or Technology with 7+ years of relevant work experience (MS or PhD preferred); or equivalent combination of education and experience. • Advanced familiarity with motion systems as related to mechanical design., • Advanced understanding of mechanical systems, materials science, and manufacturing processes., • Demonstrated expertise with measurement tools, data acquisition systems, and sensors., • Proven experience with Geometrical Dimensioning and Tolerancing methods; Six Sigma certification preferred. Technical – • Strong technology perspective, particularly related to the manufacture of complex machinery (e.g., CNC machines, machine motion, etc.)., • Expertise in tolerance analysis, stress analysis, FEA (Finite Element Analysis), and thermal management techniques., • Experience leading projects and mentoring junior engineers. Salary Range: $80,000-$115,000. The salary offered will be determined by the candidate's education, experience and other qualifications, considering internal equity among current employees with similar skills and experience. QED is an Equal Opportunity Employer

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Lead Protection & Control Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 10 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD, • IEC 61850/Goose experience required Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description PEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Quality Engineer Your Role: Under the direction of the Quality Director, you will assist in elevating and systematizing engineering and manufacturing processes. Daily activities will require you to proactively identify potential issues to mitigate risk, improve product quality, manage industry and regulatory compliance and assist in delivering corporate strategic initiatives. Responsibilities Include: • Analyzes quality performance data and metrics to identify and drive improvement opportunities. Actively promote and participate in a cross-functional teamwork environment. * Facilitate and promote the use of appropriate problem-solving techniques for effective root cause analysis and successful corrective action for customer complaints and internal nonconformances. * Understand and promote overall compliance with AS9100/ISO9001 and 13485 specifications as they relate to product conformance and contractual requirements. * Understanding of inspection methodologies used to determine compliance for machined and assembled products. * Manage, conduct, and support internal and external audits, publishing findings and recommendations. * Lead in the implementation of assurances, process controls, and corrective and preventative actions (CAPA) related systems designed to meet or exceed internal and external requirements. * Drives continuous improvement and prevention of future failures by helping facilitate the implementation of corrective action. * May be accountable for projects/ programs and developing methods and parameters, project methodology, and/ or project proposals. * Demonstrate a productive work ethic and commitment to quality that sets the standard for PEKO Standards. Basic Qualifications: * Associate degree in Engineering or equivalent. * 2+ years of quality control experience in a manufacturing environment * 4+ years of experience utilization of Quality Management Systems (QMS) * 4+ years of creating and/or managing Design History Files (DHF) and Device Master Records (DMR). * Knowledge of ISO 13485 and AS9100; ability to establish quality protocols and procedures that align with requirements. Preferred Qualifications: * Bachelor’s degree in engineering or equivalent * Strong communication, negotiation, team moderation skills, and ability to manage time and workload constraints. * Good understanding of QA methodologies, tools, and processes. * Knowledge in the application of quality methods and problem-solving tools (TQM, Six Sigma, 8D, 5-Why, Lean Manufacturing, or other continuous improvement methodologies). Work Authorization: US Persons PEKO Perks: * Competitive Compensation * Tuition Reimbursement (IRS Allowable pre-tax Max) * 401K, Medical, Dental, Vision * Flexible Spending & Health Savings Accounts * Life, Short and Long-Term Disability * Recognition Awards & Discretionary Benefits Our Core Values: * We care about our talented and loyal PEKO family. * We are committed to providing a safe, clean, and positive workplace. * We believe in transparency, honesty, and respect for all stakeholders. * We are dedicated to maintaining an agile and financially prudent organization. * We foster the belief that PEKO people are resilient problem-solvers impacting the future. * Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: * This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice A reasonable estimate of the compensation range for this position is $60,000 - $89,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements.. Powered by JazzHR 0pm10NwpBM

Job DescriptionDescription: Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a skilled Quality Engineer to drive quality excellence through process improvement, quality system management, and engineering solutions. This role combines technical expertise with leadership to ensure product quality, maintain compliance standards, and foster a culture of continuous improvement across the organization. This hands-on role requires significant shop floor presence, working directly with inspectors and operators to ensure quality standards are maintained in real-time. The ideal candidate must be comfortable balancing theoretical quality principles with practical, day-to-day production support. Key Responsibilities: • Maintain an active floor presence throughout production areas and work directly with quality personnel to resolve quality issues in real-time., • Guide operators through complex inspection requirements and troubleshoot quality issues on the spot., • Collaborate with customers to complete source inspections., • Support production with immediate quality decisions., • Ensure proper use of inspection equipment and validate inspection methods in real production conditions., • Assist quality leadership personnel with auditing company policies, procedures, and systems that affect product quality to assure compliance with the company’s quality system and good manufacturing processes., • Establish and implement product and process quality standards while remaining in compliance with ISO9001, AS9100 and NADCAP requirements., • Lead INCR/NCR investigations., • Complete analysis on incoming products and approve all product receipts., • Inspect and test materials, equipment, processes, and products to ensure quality specifications are met., • Develop user-friendly inspection documentation for operators, such as visual aids and inspection guidelines., • Develop First Article Inspection (FAI) documentation and procedures., • Maintain inspection documentation system and update inspection procedures., • Specify and order appropriate inspection gauges and develop gauge control and calibration requirements., • Identify customer flow down requirements., • Collaborate with operations managers on process control development., • Develop, implement, and validate corrective actions for quality issues to prevent issue recurrence. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in engineering, Manufacturing, or related technical field with 3+ years quality engineering experience OR associate’s degree in related technical field with 5+ years of progressive quality experience in manufacturing and comprehensive understanding of quality principles., • Demonstrated proficiency in GD&T and blueprint reading., • Experience with measurement equipment and gauging systems., • Practical knowledge of SPC and quality tools., • Understanding of ISO 9001, AS9001 and NADCAP quality systems., • Background in manufacturing environment – precision machining or aerospace highly preferred., • High proficiency in computer technology and systems operations., • Strong analytical and problem-solving skills couples with an attention to detail. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description Allient-Rochester specializes in advanced motion control and integrated automation solutions that serve OEMs across industries such as aerospace & defense, medical, semiconductor equipment, e-mobility & logistics, industrial automation, and packaging. We are seeking an experienced Senior Application Engineer to support our growing drives, controls, and mechatronic integration business. This position will help the successful launch and deployment of Allient Rochester’s new high-performance servo drives and control platforms. The Senior Application Engineer will work closely with customers, product engineering, and business development teams to apply, validate, and support these new technologies in high-performance applications. Apply now! Responsibilities: • Lead system-level application engineering for automation and motion control projects., • Support OEMs and machine builders in applying Allient’s integrated motion solutions, from concept through commissioning., • Perform system sizing and tuning of servo motors, drives, and motion axes to meet performance and precision requirements., • Develop, test, and troubleshoot control logic using IEC 61131 programming environments (e.g., Structured Text, Ladder Logic)., • Provide technical support during system integration, factory acceptance, and field deployment., • Customize and configure motion control software, HMIs, and PLCs as part of turnkey sub-system solutions., • Collaborate with sales, engineering, and manufacturing teams to ensure solutions are aligned with customer needs and system performance goals., • Assist in application documentation, test plans, and customer training as needed., • Bachelor’s degree in Electrical Engineering, Mechatronics, or a related technical field., • 5+ years of experience in automation or motion control system design and implementation., • Strong background in servo system sizing, tuning, and commissioning., • Proficient in IEC 61131-3 programming languages (Structured Text, Ladder, etc.)., • Working knowledge of motion controllers, drives, servo motors, and feedback systems., • Excellent troubleshooting, communication, and customer-facing skills., • Ability to work independently and as part of a multidisciplinary team., • Experience with Python programming is a plus., • Willingness to travel up to 50%, including time at customer sites and the Rochester, NY facility. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Insero Talent Solutions is recruiting a Senior Magnetics Design Engineer for a manufacturing company in Rochester, NY. Job Summary: A leading designer and manufacturer of high- reliability passive components and precision subsystems is seeking an experienced Senior Magnetics Design Engineer to join our Magnetics Design Center Team. In this role, you will develop electrical designs and mechanical configurations for custom transformers, inductors, filters, and other magnetic components. Your responsibilities will include contributing to the design and specification of custom tooling, assembly fixtures, inspection fixtures, BOMs, and process instructions. As a Senior Magnetics Design Engineer, you will leverage your expertise to enhance the company's competitive edge in quotations, new product developments, and successful production, while also engaging in the trial and verification of new technologies. Responsibilities: • Translate customer magnetics requirements into success criteria and specifications for components and processes., • Develop and leverage computer aided modeling and simulation methods for design trade-off analyses, including finite element analyses., • Communicate effectively with customers, suppliers, and team members to support collaborative new product development., • Analyze experimental results from designs of models and prototypes to recommend improvements and cost reduction strategies., • Monitor external technology developments related to power electronics and magnetics design tools and advise management on opportunities and risks., • Participate in daily team huddles to review project statuses and collaborate on overcoming, • Develop milestone plans and deadlines for project completion, ensuring accountability and timely updates on progress., • Establish initial concepts of magnetics solutions in quotations and prototypes, with related manufacturing processes including provision for custom tooling and new special machines, while working with suppliers to create cost-effective designs., • Propose improvements during production to reduce labor time and enhance safety and process, • Develop control plans and test circuits for new magnetics products including custom electrical testing involving sinusoidal, resonant, and non-sinusoidal methods to simulate waveforms and amplitudes of application in measuring dissipation, partial discharge or other selected parameters., • Participate in problem solving sessions involving DFMEA, PFMEA, HALT and PPAP (including MSA & PCP for target factories)., • Support assigned projects, guiding design reviews from prototype through First Article to production, including lifecycle product change control. Collaborate with the Design Center Tiger Team to understand and enhance manufacturing processes for magnetic components, addressing any roadblocks., • Provide technical support to factories by resolving production issues related to manufacturing processes, materials, and inspection., • Attend weekly training sessions on configuration control, drawing requirements, supplier management, and related engineering processes. Qualifications: • BS degree in Electrical Engineering., • 5-10 years of experience in designing custom passive magnetic components for demanding power electronics applications and a demonstrated record of successful results., • Passion for continued professional development in magnetics design methods, materials and, • Proficient in Ansys, Comsol, SolidWorks, and electrical circuit simulation tools (e.g., PSPICE,, • Matlab-Simulink)., • Strong organizational and communication skills to collaborate effectively with global colleagues and suppliers., • Ability to coordinate multiple projects and manage time and resources efficiently., • Must meet eligibility requirements for access to export-controlled data.

Job DescriptionDescription: Position Summary The Manufacturing Engineer is responsible for developing, optimizing, and sustaining manufacturing processes to support efficient, high-quality production. This role involves analyzing products and production methods to improve both new and existing operations. Working collaboratively within a cross-functional team environment, the Manufacturing Engineer applies technical expertise to drive continuous improvements that reduce cycle times, enhance product quality, and deliver measurable cost savings. Duties and Responsibilities • Design and implement robust manufacturing processes to ensure product stability, establish production standards, and support ongoing process improvements., • Optimize and innovate manufacturing methods, equipment operations, and overall production performance to enhance efficiency and reduce waste., • Collaborate cross-functionally with engineering, production, and other departments to troubleshoot issues and resolve production challenges., • Research, recommend, and integrate new technologies and systems to upgrade manufacturing capabilities and drive innovation., • Prepare accurate and timely quotes in response to customer deadlines, ensuring feasibility and alignment with production capabilities., • Design and develop end-to-end manufacturing solutions including processes, tooling and fixtures, CNC programs, and detailed work instructions. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in Engineering preferred., • Prior experience as a Manufacturing Engineer or in a similar role is strongly preferred., • Proficient in CAD/CAM software, including SolidWorks, Mastercam, and PartMaker., • Knowledge of CNC manufacturing equipment and quality assurance methodologies., • Skilled in Microsoft Office Suite and experienced with ERP systems., • Strong project management, problem-solving, and multitasking capabilities., • Demonstrated commitment to maintaining health and safety standards., • Able to work both independently and collaboratively within a team environment. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description TekPro is partnered with a premier contract machining company in the Rochester, NY area in their search for a Manufacturing Engineer! This position is focused on MasterCAM programming, tooling/fixture design, and process engineering for complex parts in the aerospace, defense, and medical industries. This position typically offers high hourly pay and lots of overtime for tremendous earning potential, but can be flexible for a salaried job offer as well. Position Summary Responsible for developing and optimizing manufacturing processes. Analyze products and methods to innovate both new and existing operations. Drive enhancements that reduce cycle times, elevate product quality, and generate significant cost savings. Duties and Responsibilities: • Ensure product stability and support manufacturing by designing robust process capabilities, establishing standards, and continually improving the manufacturing process., • Optimize & innovate manufacturing, production process, machine operations and overall performance.  Collaborate with management, manufacturing & other departments to troubleshoot production needs., • Upgrade systems and processes with new technology., • Meet customer deadlines on quotes., • BS degree in Engineering or commensurate work experience, • Previous experience as a manufacturing engineer or similar role preferred., • Proficient in CAD/CAM software (SolidWorks, Mastercam, Part Maker)., • Familiarity with manufacturing equipment and quality assurance techniques (CNC equipped)., • Proficient in Microsoft Office and ERP systems., • Strong project management, problem-solving, and multitasking abilities., • Continuous commitment to health and safety standards., • GD&T, • CNC Tooling, • CNC Programming, • Design for Manufacturability (DFM), • Machine Setups for Production Runs, • CNC Mill (3-4 axis VMC), • CNC Lathe (2-4 axis), • CAM Software (Mastercam), • CNC Mill (5+ axis VMC)

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. Overview With the growth of our iOS app, being the #18 productivity app in the App Store category and also our recent recognition as Apple's 2025 Design Award for inclusivity, we find the need for a Senior iOS Engineer to help us support the new user base as well as work on new and exciting projects to push our missing forward. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Opportunity to lead key engineering and product decisions, • Actively shipping production code for the Speechify iOS app, • Work within a dedicated product team, • Participate in product discussions to shape the product roadmap, • Experience. You've worked on products that scaled to a large user base, • Track record. You have worked on various products from inception to decent traction. You have been responsible for engineering the product, • Customer obsession. We expect every team member whose responsibilities directly impact customers to be constantly obsessed about providing the best possible experience, • Product thinking. You make thoughtful decisions about the evolution of your product and support internal teams and designers into taking the right direction, • Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time, • Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down, • Swift Programming Language, • SwiftUI experience, • Experience in Multithreading Programming, • Working with CI/CD infrastructure, • Experience with Fastlane, • SOLID principles, the ability to write every single class according to SOLID, • A fast-growing environment where you can help shape the company and product, • An entrepreneurial crew that supports risk, intuition, and hustle, • The opportunity to make a big impact in a transformative industry, • A competitive salary, a collegiate atmosphere, and a commitment to building a great asynchronous culture, • Work on a product that millions of people use and where daily feedback includes users sharing that they cried when they first found the product because it was so impactful on their lives, • Support people with learning differences like Dyslexia, ADD, Low Vision, Concussions, Autism, and Second Language Learners, and give reading superpowers to professionals all over the world Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description ProArch is an IT services and consulting company with offices in Upstate NY and Atlanta, GA. Our business is growing, and to serve our customers in the best possible manner, ProArch is looking to hire highly qualified, motivated, industrious professionals. We have multiple open positions for a Consulting Engineer. ProArch Sales and Consulting staff collaborate with clients to design the best solution to fit their business needs. The Engineering technical staff works to configure, install, secure, and support IT/OT environments of clients of all sizes. As a member of the team, you will be expected to be able to assess and design, as well as implement and secure technology with guidance provided by the Industry Solutions Program Manager. A Systems Engineer is a client-focused position with a highly technical skill set that includes Microsoft, VMware, Storage, Networking, cloud architecture, and deployment knowledge. You should be able to understand client business processes and be able to align those with technological, strategic goals and objectives. Technology Expertise The successful candidate should have extensive expertise in Enterprise technologies, and an overall understanding of Enterprise on-premises, hybrid, and cloud infrastructure components that make up customer environments. -Planning, migration, implementation, and management of Windows Server environments including Active Directory, DNS, DHCP, File Services\DFS, IIS, and Group Policy Objects\Hardening -Planning, implementation, and management of Microsoft Hyper-V and/or VMware vSphere environments -Planning, implementation, and management of Microsoft Azure Infrastructure as a Services (IaaS), Platform as a Service (PaaS) and Virtual Networking solutions -Planning, and implement of Microsoft Office 365 E-mail, SharePoint, Teams, and OneDrive -Planning and implement of end-user virtual solutions including Remote Desktop Services (RDS), Azure Virtual Desktop (AVD), and VMware Horizon View -Implementation and management of backup technologies that are image and file based. Disaster Recovery and replication technologies such as Veeam Enterprise, VMware Site Recovery Manager, or Azure Site Recovery -Implementation and administration of Microsoft Enterprise Management Tools such as Intune -Implementation and administration of Enterprise Storage include DELL/EMC, HP, Microsoft, and VMware Software Defined Storage -A high level understanding of Switch, Routing, Wireless, and Firewall networking including Cisco, HP, Meraki, SonicWALL, and Barracuda The ideal candidate must have experience with: -Performing strategic technology assessments including data gathering, analysis, and recommendations in an Energy setting -Aligning organization technology goals with business requirements -Troubleshooting network and system issues -Security best practices system hardening -Experience in Incident Response -Collaborating with clients in different vertical markets -Interfacing with other 3rd party vendors, i.e., hardware, software, and service providers -Working individually and as part of a team -Interfacing with clients remotely, over the phone, and on-site -Developing product and solution recommendations for deliverables and presales opportunities -Budgeting and time estimation The ideal candidate preferred experience: -Experience 3 years+ servicing manufacturing, power generation or a similar industry -Knowledge and experience providing OT (Operational Technology) security and support solutions for automation and control technologies and systems – examples include Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), SCADA systems -Ability to create confidence in environments where system discovery and gap analysis is required and may not be fully understood by clients. Provide solutions to these systems utilizing staged improvements to create insights, resilient and stable Operational Technology systems -Strong problem-solving and communication skills with first time engagements – Projects, Industrial Control Systems, or problems tend to be unique, so critical thinking skills and the ability to communicate across multiple disciplines are essential. -Ability to communicate complex IT/OT network systems and dataflows to stakeholders and provide analysis of risks, requirements, and responsibilities for deployment of new solutions or upgrades -In-depth knowledge of OSI Model and the ability to configure production systems at one or more layers. Application, Network, Session level maintaining least privilege and limiting end-user and production impacts – this includes LAN, WAN, WLAN, VPN, and more -Understanding of unique protocols to Industrial Controls, Modbus, DNP3, others Requirements Education and Certification Requirements: -Experience 10 years+ or associate's degree or better -Certifications: Microsoft, VMware, storage, and networking -A verbal and written technical assessment is given to potential candidates that must be passed Requirements for Systems Engineer: -Clean valid U.S. Issued Driver’s License -Willingness to travel up to 50% of time, coordinated with personal availability -Contact point for escalation regarding Energy projects and support -Supports ProArch’s Industry Solutions Manager with tasks related to the Energy business unit. -Proven collaborator -Mentoring, education, and technical oversight related to projects and new technologies to internal staff and customers -Divergent thinker that can provide creative and resourceful input to problems -Takes ownership of project, tasks, and client deliverables -Motivated, thorough, innovative, accurate, and articulate -Ability to prioritize effectively and handle shifting priorities professionally -Exemplary written and verbal communication skills -Produce project documentation in a concise and clear manner -Proven presentation preparation and delivery skills to a diverse audience from C-suite to end users -Maintain expertise in relevant solutions, products, and services -Broad base of knowledge of the IT services industry and trends -Analysis and identify best practice gaps -Collaborate with Sales Management to: oIdentify sales opportunities oUp-sell and cross-sell client oProposal development oClose deals -Collaborate with ProArch’s Security team to harden and make recommendations to customers -Provide daily time accounting and monthly expense report submittal -Maintaining of professional certifications and obtaining new certifications Benefits *

Job DescriptionSalary: $68K-$80K Were looking for an Enterprise Solutions Engineer to join our growing team in West Henrietta, NY! This is a hybrid opportunity. Who we are: Safran Electronics & Defense is an international company with 10,000 employees, built on proven expertise in technologies that underpin sovereignty. By combining human and artificial intelligence, we develop the products and services that empower aerospace and defense players to observe, decide and guide, all over the world. Safran Electronics & Defense also supports fellow Safran companies by sharing its state-of-the-art electronics skills and expertise. Within Safran Electronics & Defense, our Timing & Synchronization division is the leader in R-PNT (Resilient Positioning, Navigation & Timing) solutions. We supply military and commercial industries worldwide with accurate timing technologies and equipment (Time Servers, Inertial Navigation System), as well as ultra-precise timing and frequency distribution for applications requiring a high degree of reliability and accuracy across IP time distribution standards. In this way, we contribute to the performance of critical operations support. Whenever accuracy, safety, security and reliability are critical, the solutions of Safran Electronics & Defense leads the way. The Position: The Enterprise Solutions Engineer plays a pivotal role in designing, delivering, and supporting innovative business solutions across the organization. This position blends technical expertise with strategic collaboration to solve complex business challenges using modern technologies. The Day to Day: • Solution Design & Delivery, • Collaborate with internal stakeholders to define business challenges, uncover root causes, and document functional and technical requirements., • Design and implement end-to-end business solutions from proof-of-concept to production using a mix of enterprise systems, cloud tools, and custom applications, • Serve as the primary owner of the solution lifecycle: development, testing, user acceptance, deployment, support, and documentation, • Technology Enablement, • Leverage the Microsoft Power Platform (Power Apps, Power Automate, Power BI, Dataverse) to build low-code/no-code solutions., • Explore and implement emerging technologies, including AI, machine learning, and automation frameworks, to drive business process improvements., • Integrate disparate enterprise systems through APIs, middleware, or ETL tools as needed., • Data Management & Visualization, • Perform data analysis to support solution design and business decision-making., • Create dashboards, visualizations, and reports that enable self-service insights and operational transparency., • Customer Engagement & Collaboration, • Act as a trusted partner and technical advisor to internal business units., • Facilitate user training, documentation, and change management to ensure successful solution adoption., • Provide post-deployment support, incident resolution, and enhancements. What you Bring to Safran: • Bachelor's degree in Information Systems, Computer Science, Engineering, or related field; equivalent experience considered., • 3+ years of experience in a technical solution delivery role (e.g., Systems Engineer, Business Systems Analyst, Applications Developer)., • Proven experience with Microsoft Power Platform (Power Apps, Power Automate, Power BI)., • Strong analytical and problem-solving skills with attention to detail., • Working knowledge of databases (SQL Server, PostgreSQL, etc.) and API integration., • Experience with UAT coordination, deployment strategies, and user documentation., • Excellent communication and interpersonal skills; ability to translate technical concepts to non-technical stakeholders. Preferred Qualifications: • Experience implementing AI solutions (e.g., Azure AI, OpenAI, Copilot)., • Familiarity with enterprise business systems (ERP, CRM, HRIS, etc.)., • Experience in process mapping, Lean/Six Sigma, or continuous improvement methodologies., • Background in Agile or DevOps environments. Visit ourwebsitefor more information or check out our videos onYouTube At Safran Electronics & Defense, youll combine passion for your job with a quality work environment adapted to a good life balance. Benefit from a variety of opportunities to shape the career path that suits you: our leaders and technical experts are there to support you from your integration and career development, in France and abroad. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veterans status or any protected category. We encourage veterans and people with disabilities to apply.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Sales Engineer II is responsible for elevating awareness of Stark's Compression core competencies and capabilities through active account management with assigned accounts to achieve revenue and profit targets. The Sales Engineer will work with management and peers on account management, sales strategies and goal achievement, project design, project bidding, project management, and pipeline management. What are we looking for: • Bachelor's Degree in engineering., • Five (5) years' experience in pumps and/or blower systems., • Five (5) years' experience in sales engineering., • A proven track record in account management., • Knowledge of of Food and Beverage, Dairy, Chemical/Petrochemical, and Pharmaceutical Industries. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. This is a base salary, and the position also includes eligibility for a variable sales bonus. There is potential for a sales start-up assistance program. Job Posted by ApplicantPro

Job DescriptionGas Project Engineer Pay Range: $70,000-85,000 Annually DDS Engineering and Surveying, LLP (DDSE), is an experienced and highly qualified natural gas/civil engineering, permitting and survey firm that has been performing consulting engineering and construction services in the natural gas industry for many years. We currently perform these engineering services related to natural gas transmission, distribution main design, station design (M&R, gate stations, and regulator stations) and customer services (residential and commercial) for a variety of natural gas customers throughout the Northeast. Our dynamic team is comprised of experienced natural gas engineers, civil and mechanical engineers, surveyors, gas construction personnel as well as in-house staff expertise in the areas of legal, compliance, and safety. This is an office-based position and can work out of any of our three Engineering Offices located in Rochester, NY, Canonsburg, PA, or Southborough, MA. We are seeking talented and highly motivated individuals to be part of our team. Benefits: • Health, Dental, and Vision Plans, • 401K with match, • Paid Time Off (PTO), • Life and AD&D coverage, • Short and Long-Term Disability, • HSA and or FSA Accounts, • Comprehensive Training ProgramsThe Gas Project Engineer is responsible for contributing to all phases of civil engineering for natural gas infrastructure projects. This can include Pipeline or Facilities related projects. Will manage the design, engineering, permitting and approvals necessary for all projects. This Engineer may be expected to perform field-based activities as necessary. Skills and Experience Required: • 2-5 years related experience in natural gas or utility design., • Hands on experience with AutoCAD, Microsoft Word, and Excel, • Self-starter, highly motivated, team player with strong organizational and communication skills, • Ability to interact with clients, customers, officials, contractors, and other staff., • Bachelor’s degree in an engineering related field or substantial equivalent experience.Preferred:, • Local, County, and State related permitting, • Prior land development engineering or design experience would be a plus, but not required., • EIT (Engineering in Training) certification.Why Join Our Team:, • Competitive compensation and benefits package., • Opportunities for career growth and development., • Commitment to safety and a positive work environment., • Join a dynamic team dedicated to excellence in our industry.DDS is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law. Revised: 01/17/2024 Powered by JazzHR dwZBJLZnRt

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Protection & Controls Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 7 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job DescriptionDescription: Position Summary This position fully understands customer requirements and translates them into processes and documentation that will allow for our Manufacturing partners to successfully produce the items. These outputs will allow us to exceed our customers’ expectations for quality, delivery, and cost, while ensuring our employee’s and neighbor’s health and safety. Duties and Responsibilities · Analyzes drawings, models, PO, and other customer documentation to produce all manufacturing and purchasing documentation. · Fully functional in Engineering and Purchasing modules in selected ERP system. All part maintenance sections are completed by this group. Engineering workbench for each part number is maintained with appropriate documents such as the inspection print, set up sheets, and inspection reports. · Develops process and writes CNC programs for: CNC Lathe, CNC Mill. Full knowledge of associated processes to manufacture full product line. · Customer communication as required to understand product fit, form, and function. · Help set-up machines and get first piece approval as needed · Ability to “engineer” and “release” jobs to Manufacturing. · Maintain safe work environment by following standards and procedures and complying with legal regulations. · Coach and mentor junior employees; seek opportunities to grow leadership in others. · Update job knowledge by participating in educational opportunities, reading technical publications, attending seminars, watching industry videos, etc. · Other duties as assigned. Requirements: Position Qualifications · Associates degree in Engineering or related discipline is a plus · 3+ years of experience in related field. Required Knowledge, Skills and Abilities • Knowledge of electronics and machine tools., • Experience with programming., • Must have good problem solving skills., • Must have excellent time management skills., • Must have good organizational and planning skills., • Must have excellent written and verbal communication skills., • Must be mechanically inclined., • Knowledge of metal shop work., • Must be highly detail oriented., • Must be able to work effectively with little or no supervision., • Must have the ability to write and read complex spreadsheets., • Must have the ability to read blueprints., • Knowledge of safety measures pertinent to each job assignment.

Job Description Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical project leader for the organization with the responsibility of expediting the process flow of jobs through the shop from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost-effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Minimum Qualifications: • Intermediate level professional, • Two years or more of professional experience in a manufacturing business environment, • Five years or more of manufacturing/sheet metal/welding fabrication knowledge, • CNC machining / programming background is a plus, • A.S. Degree in Engineering required; Manufacturing, Mechanical or Industrial Degree (B.S. preferred) Specific Duties: • Responsible for all phases of the quoting process including; developing a Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usage’s, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual job cost vs. quoted job cost, • Drive process improvements to generate cost reduction, • Help write the process sheets (Travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed Measurement Tools: • On time delivery to customers, • Quality performance, • Decrease in job setup time on turret, mills and lathes, • Cost savings for production; including tooling, • Project management and document control organization skills, • Have a “Team player attitude”, promote commitment and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Senior Electrical Engineer will maintain and support our industry-leading products and systems. This individual will work across a variety of functional groups to develop concepts, strategies, construction documents and engineering reports. The ideal candidate is an inventive problem solver that is capable of working through technical challenges and employing pragmatic solutions. What are we looking for? • Bachelor's degree in Engineering with a minimum of ten (10) years of experience required., • Direct involvement in building infrastructure and/or energy reduction initiatives (consulting) experience required., • Building Power Distribution/Lighting experience required., • A NY Professional Engineering (PE) license is mandatory., • CAD experience. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionDescription: WeTheHobby is a thriving sports entertainment company with global reach, headquartered in Rochester, NY. We value creativity, diversity, innovation, dedication, and our community! Our work environment includes: • Modern office setting, • Strong growth opportunities, • Flexible working hours, • Lively atmosphere, • A team that cares about one another, • Welcoming and inclusive culture WeTheHobby is looking for a skilled and solution-driven Senior Software Engineer to design, develop, and maintain the server-side logic, database architecture, and APIs that support our platforms. You will work closely with front-end developers, product managers, and other stakeholders to create scalable and secure systems that enhance our customer experience. This role is based out of our innovative sports card store in the Neighborhood of the Arts, Rochester, NY. Key Responsibilities: • Take ownership of the design, development, and maintenance of scalable and robust backend services., • Application design, including the authoring of design documents, flow charts, sequence diagrams, and other artifacts that make successful on-time delivery possible., • Create and optimize database schemas, queries, and models for performance and scalability., • Ensure applications are scalable, secure, and maintain high uptime for our growing user base., • Collaborate with cross-functional teams to gather requirements and translate them into technical solutions, ensuring alignment with business objectives., • Ensure the scalability, performance, and reliability of the applications you build., • Leading service/software implementation by contributing to the codebase, acting as an example of how to write testable, maintainable code which can adapt to the changing needs of our users., • Work on payment gateways, live streaming tools, and other third-party integrations to enhance platform functionality., • Maintain comprehensive technical documentation for internal and external use., • Work closely with front-end developers, designers, and stakeholders to integrate user-facing elements with server-side logic, • Participate in planning and strategy meetings to align technical solutions with business goals., • Ensuring the quality of the application development remains high through the application of best practices like automated testing, peer code reviews, and automated CI/CD pipelines., • Stay updated with the latest industry trends and technologies to bring innovative solutions to the team., • 5+ years of professional experience in backend development, • At least 2 of those years have been focused on designing, building, deploying, and maintaining DOTNET Applications, • 5+ years leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience, • Strong knowledge of database design, modeling, and optimization (both SQL and NoSQL), • Hands-on experience with AWS services Technical Skills: • Strong understanding of GraphQL, Rest, sockets, SignalR pub/sub and buses preferred., • Experience with enterprise software development platforms, Dotnet., • Knowledge of modern software development practices and tools (CI/CD, Git, Docker, etc.)., • Familiarity with modern frameworks, Express.js, Dotnet., • Knowledge of microservices architecture and best practices, event-driven architecture a plus, • Understanding of security best practices in software development, • Experience with eCommerce platforms or systems (e.g., BigCommerce, Square), • Familiarity with front-end frameworks (e.g., React.js) for better collaboration Soft Skills: • Excellent problem-solving skills and attention to detail, • Proven ability to work effectively in small teams with excellent communication skills., • Strong multitasking skills, capable of handling multiple projects simultaneously., • Eagerness to learn and adapt to new technologies and challenges, • Ability to work in a fast-paced environment and adapt to changing requirements. Education: • Bachelor's or Master’s degree in Computer Science, Engineering, or a related field. In accordance with applicable Federal and State laws, the anticipated salary range for this position based upon location in Rochester, NY and experience is $98,000 - $132,000 To comply with Federal law, WeTheHobby participates in E-Verify. All newly-hired employees are verified through this electronic system established by the Department of Homeland Security (DHS) and the Social Security Administration (SSA) to confirm their identity and employment eligibility.

Job DescriptionDescription: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Generous sign on bonus., • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option Position Summary The Project Manager position will be responsible for management of high profile and complex projects from start to finish. This role will also work with employees on the shop floor to improve efficiency, safety, and quality of manufacturing processes. Duties and Responsibilities · Responsible for driving total project management solutions from quote through to shipment · Plans and designs tools, fixturing, and other mechanically functioning equipment · Develops plans and implements new machining processes. · Spearheads process optimization in both engineering and manufacturing. (automation) · Provide technical support to sales team and support customer interface accordingly · Complete detailed cost models needed to support providing quotes to customers · Comprehends and disseminates customer driven specifications called out on drawings and determine how to process the parts in accordance with the specifications required. · Works with QC to ensure all QMS requirements are being met during job routing. · Understands ISO 9001 workflow requirements and follow such procedures. · Builds B.O.M. on job routers to conform with customer material requirements called out on the print, parts list, and or contract. · Reviews customer supplied purchase orders and contracts to ensure we meet all order requirements and build notations in the work instructions. · Orders specialty material, hardware, and finishing supplies pertaining to the job or project assigned. · Works with QC to review material certifications from vendors and sign off that they meet the called-out requirements from the contract. · Effectively communicates any issues encountered while working on assigned projects back to supervisor and the customer as needed in a professional and timely manner. · Leads post and pre-production reviews on defense projects during first run or after encountering issues. · Creates measurable KPI’s that will quantify success on critical to plant growth projects. · Provides support as Engineering Manager back up. · Interprets customer supplied drawings and determine the best method of manufacturing considering the equipment available and the current manufacturing schedule. · Writes work instructions in detail pertaining to any one of the fabrication processes. · Utilizes 3D CAD software to help shop floor employees better understand the manufacturing process of various parts. · 3D model customer parts using their supplied drawings utilizing CAD software. · Program machines. (laser, turret) · Supports the shop floor in any fixture design / work holding suggestions and optimize quality outcome. · Utilizes Mastercam, SolidWorks, Radan, Epicor, or similar software when required, to communicate effectively to the shop floor. · Maintains revision control of manufactured parts using our ERP system. · Other duties as assigned. Requirements: Position Qualifications · Bachelors degree in Engineering or related discipline is a plus · 10 plus years of experience in hands on machining (mills and lathes) · 3+ years of experience in Project Management. Knowledge, Skills, and Abilities · Strong communication skills, both written and verbal · Excellent problem-solving skills · Attention to detail and accuracy. · Proficient in Microsoft Office. · Ability to work independently and as part of a team. · Flexibility and adaptability to changing priorities and deadlines. · Confident decision-making ability · Capable of participating in cross-functional settings and working with support functions, manufacturing, quality engineer, and facilities. · Support cost reduction & continual improvement activities. · Analyze raw data and generate usable reports. · Knowledge of print reading and understanding of common GD&T practices. · Knowledge of materials and their chemical and physical properties.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Sheet Metal Process Engineer Reports to: Fabrication Director Your Role: The Sheet Metal Process Engineer is responsible for shepherding products through the production process, while ensuring customer delivery and quality requirements are satisfied. This high impact role requires innovative thinking, a high sense of urgency and collaborating in a cross-functional environment. Responsibilities Include: • Develop and validate manufacturing processes for new products, including tooling, fixtures, and assembly methods., • Participate in design reviews to ensure manufacturability and cost-effectiveness., • Interpret and clarify engineering drawings, BOMs, and specifications for internal teams and external suppliers., • Serve as the primary point of contact for technical questions related to the TDP., • Ensure documentation is complete, accurate, and production-ready., • Define and optimize processes., • Support root cause analysis and corrective actions for production issues., • Implement lean manufacturing principles and continuous improvement initiatives., • Work closely with procurement, quality, and supplier engineering teams to ensure alignment on technical requirements., • Collaborate with design and R&D teams to ensure manufacturability of new products., • 5+ years hands-on experience of bending, forming, welding and finishing processes., • .AS/BS in relevant technical field., • Strong understanding of NPI processes and design-for-manufacturing (DFM) principles., • Familiarity with ERP and PLM systems., • Experience working with suppliers and contract manufacturers., • Proficiency in CAD software (e.g., SolidWorks) and manufacturing systems (e.g., PDM, Autodesk Vault, SW Composer)., • Knowledgeable in programming., • Proficiency in interpreting engineering drawings, GD&T, and BOMs., • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision ProductsA reasonable estimate of the compensation range for this position is $60,000.00 - $90,000.00 per year. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR UUQJBe6ntM

Job DescriptionDescription: Addison Precision Manufacturing is a world-class contract manufacturer of precision-machined components. Our focus reflects a commitment to machining excellence, and we strive to deploy the latest technologies to meet the highest standards of any industry requiring precision machined components, including customers in the aerospace, aircraft, medical and precision manufacturing industries. In 2019 we built a brand new, air conditioned, state of the art, manufacturing facility. We are looking to build our team here. Addison Precision Manufacturing is looking for Process Engineer who will develop and maintain processes in a lean manufacturing setting. The Process Engineer works with both the customer and fellow departments to develop and improve the manufacturing process by studying product and manufacturing methods. Process Engineers have the ability to contribute their knowledge and ideas to improve upon current processes, resulting in reduced cycle times, improved quality of product and increased cost savings. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceRequirements: Duties & Responsibilities: • Support manufacturing in productivity and quality improvements, • Assure product and process quality by designing testing methods, establishing standards., • Develop and maintain manufacturing process flows., • Collaborate with Engineers, Contractors and Suppliers, • Optimize processing capabilities through use of continuous improvement principles, • Assist in the development (design and machine) new/existing features., • Support Root Cause Analysis and Corrective Action determination, • Bachelor's or Master's degree in Engineering preferred or equivalent experience., • Previous experience as a process engineer or similar role preferred., • Familiarity with manufacturing equipment and quality assurance techniques., • Project management skills, • Problem solving ability, • Strong GD&T knowledge, • Continuous commitment to health and safety standards., • Contribute to a team effort as well as being able to work independently.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and support services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Sales Engineer II is responsible to engage an assigned list of existing and prospective accounts seeking to learn how Stark Equipment's Critical Power Division can help align Siemens product and service offerings with current and future facility infrastructure needs. This position will focus on providing design assistance, configure product offerings and help set pricing strategies for power distribution equipment on new applications and existing facility critical power equipment. Successful performance will be directly related to achieving revenue & gross profit targets & account management attainment benchmarks. What are we looking for: • At least 5 years of industry (power distribution) experience required., • Technical understanding of Electrical Power systems required., • Capability to mentor and foster a healthy team environment., • Ability to multi-task, work under pressure and meet deadlines required., • Must be able to deal with a large volume of work in a fast-paced, time-sensitive environment., • Ability to drive individual sales success., • In-depth knowledge of the market. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. This is a base salary, and the position also includes eligibility for a variable sales bonus. There is potential for a sales start-up assistance program. Job Posted by ApplicantPro

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Senior Project Engineer- Mechanical oversees design, development, implementation, and analysis of projects from concept to completion. Has a broad knowledge of engineering design tasks and assists in the resolution of complex problems. This individual manages the preparation of plans, designs, calculations, equipment selections and engineering reports. What are we looking for: • Associates degree required; Bachelor's degree preferred. Higher education degree a plus., • 10+ years of experience in building infrastructure and/or energy reduction initiatives., • Additional certifications (i.e. CEM, LEED AP, EIT, or PE) also a plus., • Proficient with planning, scheduling, and coordinating detailed phases of projects., • Proficient with time management to follow the various detailed phases of projects., • Proficient computer skills, including Microsoft Office. CAD experience a plus., • Strong written and verbal communication skills are necessary. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Electronics/Software Engineer Overview As one of our Electronics/Software Engineers, you will be key to helping us research, design, develop, and test electrical components, circuits, and systems for the creation and manufacturing of OLED Lighting products. Why is this role so important? Ultimately, we pride ourselves in empowering our customers to make unique products with the world's most advanced, best performing, and highest quality multi-stack OLED technology. It is our mission. We must maintain our technological advantage by continuous development of advanced technologies to make our OLED lighting products even more reliable, brighter, and higher performing at lower cost. What You'll Do Every Day As a part of our User Experience team, you will work closely with the Research & Development and Production teams to help build and ensure the functionality and quality of various prototypes, demonstrators, applications, manufacturing tools, and products under development. The cool thing about OLEDWorks is that one minute you might be working closely with our CTO, and the next you might be working alongside one of our new co-op employees or technicians learning all about OLEDs and our technology. We truly have a culture of learning, knowledge sharing, and innovative inspiration. Day to day, you will be designing devices, coding applications, and performing hands-on electronics work. You will work in a desk environment using CAD and development software as well as in our research lab using a variety of electronics assembly tools. You will also support various trade shows and customer tech days with the design and assembly of demonstrators (on site). Skills You Must Bring Ideally you have a BS/BE degree in Electrical Engineering or Electronics Engineering. You have at least 3 years of full-time related job experience in a research and/or manufacturing environment. You can code, use 2D and 3D CAD software, and have electronics design and assembly skills all in a professional setting. You pay attention to the details and are diligent and thorough. Solving challenging technical problems is a passion and never-ending mission. Working on a wide variety of project types is energizing. You take pride in your accurate and consistent work and like to contribute collaboratively as a team. You are comfortable primarily working in an office, located in Rochester, NY. OLEDWorks is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical leader for the organization, with the responsibility of expediting the process flow of jobs through the factory from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Requirements Minimum Qualifications: Position is located in Rochester, NY • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word, Excel and MRP Systems, • Solid understanding and application of Geometric Dimensioning & Tolerancing (GD&T), • Ability to read and understand blueprints at an advanced level, • Experience in the utilization of lean manufacturing practices and ISO Quality Systems, • Three years or more of manufacturing/sheet metal with welding fabrication knowledge, • CNC machining / programming background is a plus, • Ability to design & model in 3D CAD Software, Solidworks Preferred Production Specific Duties: • Voices all concerns while working with other production staff, Quality Assurance, Engineering and Vice President of Operations to resolve any and all current or potential problems affecting the production schedule, • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures, • Recommend continuous improvement actions for improving work processes Departmental Specific Duties: • Responsible for all phases of the CNC Programming Process, review Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual time and material standards vs. quoted time and material standards, • Drive process improvement to generate cost reduction, • Help write the process sheets (travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed, • Design tooling and gauges as needed to ensure customers quality requirements are achievable, • Control proper revision levels for all programs in the company database Measurement Tools: • On time delivery to customers, • Quality performance recognized in scrap reduction and minimized process variation, • Decrease in job setup time on all equipment, • Cost savings for production; including tooling, • Project management and document control organization skills

Job DescriptionPower-Flo Technologies is a leading distributor of electrical equipment offering one of the most comprehensive product and service portfolios in the state, including automation, drives, controls, power distribution, and motor repair. We are looking for an experienced Applications Engineer to join our Upstate New York team. You will play a critical role in delivering complete, real-world systems and solutions to our customers. Applications Engineer Primary Functions • Pre and post sales support for automation, PLCs, drives, motion control, and machine vision products and services., • Assist customers with proof of concept for automation, PLCs, drives, motion control, and machine vision applications., • Assist sales and account managers as necessary to close business., • Phone and On-Site customer support., • Preparation and execution of product training classes including development of course and materials., • Attend vendor training classes as offered and/or required., • Maintenance, appearance and upgrades to demos., • Weekly engineering activity report and schedule., • Target and plan for minimum $20K annual engineering and training billings., • Minimum 2 customer calls per week, whether technical or sales., • Monitor and complete assigned Engineering Tasks, • BS Engineering or equivalent technical degree, • Knowledge of automation, PLCs, drives, motion control, and machine vision applications, • Advanced computer skills: Windows, VM Ware, Networking, • Knowledge of Siemens programming and HMI software a plus, • Ability to operate a motor vehicle We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance, 401(k) and long-term disability plans. Salary Range $75,000 - $125,000 annually About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Classification: Non-Exempt We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Worker is responsible for regular preventative maintenance of large industrial textile processing equipment, as well as facility maintenance. Assists the Maintenance Technician and/or Chief Engineer as required. This position reports to the Chief Engineer. Our full-time employees enjoy: • Medical, Dental, Vision, FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Career Advancement, • Learning & Development Opportunities Essential Functions: • Performs basic maintenance duties, including monitoring oil levels and performing regular preventative maintenance of grease fittings, lint traps, shaker screen barrels, limited electrical troubleshooting., • Relies on instructions and pre-established guidelines to perform the functions of the job., • Relies on limited experience and judgment to plan and accomplish goals., • A certain degree of creativity and latitude is required., • Assists in problem resolution in an effort to minimize equipment downtime., • Looks for opportunities to continually improve maintenance processes, • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Demonstrate adequate mechanical aptitude., • Proficient in the proper use of power and hand tools., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management and team member skills., • Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: • High school graduate or equivalency preferred. Typical Physical Activity: • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Worker must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Eastman Kodak Company is looking for a Control System Engineer to join our team in Rochester, NY. We are seeking an individual with the background to be successful supporting our batch Emulsion and Film Sensitizing Machine Manufacturing Operations located within Eastman Business Park in Rochester, NY. Primary Responsibilities • Provide technical support for the operation, maintenance and continuous improvement of manufacturing instrumentation and process control systems., • Work closely with operations, process engineers, and maintenance to understand the business and user needs and priorities., • Provide full life cycle support of control systems in our film sensitizing area, including developing requirements, programming support, commissioning, and ongoing hardware and software maintenance, from the control room to the field instrumentation., • Support upgrade projects for existing Rockwell Automation PLC based control systems, Emerson Ovation DCS and Reliance Automax Machine Coordinated Drive Control Systems including identifying system hardware and software architecture improvement opportunities., • Provide hardware and integration support for Ethernet based control systems in the plant IT environment., • Work with maintenance to develop data driven reliability improvement opportunities, as well as troubleshoot system hardware, resolve software malfunctions and assist in system improvements and software upgrades., • Implement improvements in systems capabilities that will increase the ability to meet customer requirements, including safe and reliable operations, and improve business competitiveness, using Six Sigma methodology as applicable. Qualifications • Bachelor’s degree in electrical engineering or Electro-Mechanical Technology (Mechatronics), • Knowledge and understanding of Rockwell Automation PLC's and Process Control DCS, • Communication skills: ability to interact with operator/mechanics/process engineers/staff/management, • Knowledge of Rockwell VFD’s, their application and configuration, • Ability to complete work independently and through influence, • Ability to lead and participate on teams, including outside contractors, • Ability to configuring, documenting and troubleshooting control systems

POSITION DESCRIPTION: The Junior Packaging Engineer plays a key role in supporting the design, development, and implementation of packaging solutions that meet product protection, cost efficiency, and sustainability goals. This entry-level position is ideal for a recent graduate or early-career professional with a passion for packaging innovation and a desire to grow within a collaborative, fast-paced environment. The Junior Packaging Engineer works closely with cross-functional teams including product development, supply chain, and operations to ensure packaging solutions align with business objectives and customer expectations. ROLES & RESPONSIBILITIES: Assist in Packaging Design: • Support the creation of packaging concepts for new and existing products using CAD and prototyping tools., • Research and recommend materials based on performance, cost, and environmental impact., • Execute standard packaging tests (i.e. drop, vibration, compression) to validate performance., • Identify opportunities to reduce packaging waste and improve recyclability., • Assist in evaluating packaging designs for cost-saving opportunities., • Communicate packaging requirements to external vendors and assist in sourcing., • Work with marketing, operations, and product teams to ensure packaging meets branding and operational needs., • Support compliance with packaging regulations and industry standards (i.e. ISTA, ASTM)., • Prepare and update packaging specifications, test reports, and change records., • Participate in process improvement initiatives and lean manufacturing projects., • Suggest enhancements to packaging workflows and tools. SKILLS & EXPERIENCE: • Bachelor’s degree in Packaging Engineering, Packaging Science, or a related field., • 0-2 years of relevant experience in packaging (internships or co-ops included)., • Basic knowledge of packaging materials such as corrugate, plastics, and paperboard., • Familiarity with CAD software (i.e. ArtiosCAD, SolidWorks) and prototyping tools., • Understanding of packaging testing protocols and standards (i.e. ISTA, ASTM)., • Strong analytical and problem-solving skills., • Effective verbal and written communication skills., • Ability to work collaboratively in a cross-functional team environment., • Detail-oriented with strong organizational and documentation skills., • Eagerness to learn and grow within the packaging engineering field.

Eastman Kodak Company is looking for a Chemical Process Engineer to support our Kodak Advanced Materials and Chemicals Division in Rochester, New York. We are seeking an individual to become an equipment / process expert in support of batch chemical manufacturing areas that include specialty organic chemicals, polymers, inks and dispersions, as well as continuous solvent recovery (distillation) operations. Responsibilities: • Become process and equipment expert in specific areas of specialty chemicals manufacturing., • Provide technical support for operations, product chemists, EHS, and maintenance., • Work closely with maintenance staff to identify and develop equipment reliability improvements., • Troubleshoot equipment and process problems to identify root cause, then provide recommendations and implement preventative measures., • Implement process and equipment upgrades for continuous improvement efforts and to support new business initiatives., • Capital upgrade project responsibilities including investigation, definition, business case development, process design, implementation, construction support, commissioning, and training., • Understand health, safety and environmental regulations and apply equipment to assure personnel and plant safety., • Participation in process safety reviews., • Implement process improvements that will increase the ability to meet customer requirements, including safe and reliable operations, and improve competitiveness using Six Sigma methodology as applicable. Required Skills/Experience: • Bachelor of Science Degree or Master’s in Chemical Engineering, Mechanical Engineering or related discipline., • Experience in chemical manufacturing environment preferred., • Effective communication skills., • Ability to interact with teams that include operators, mechanics, chemists, management and other engineers., • Able to work independently., • Willingness to learn and to work hands on as needed., • Able to lead and participate in project teams., • Demonstrated computer skills, including MS Office., • Understanding of chemical process controls.

Company Overview Röchling Medical Rochester is a leader in the medical device manufacturing sector, part of The Röchling Group. With a strong focus on contract manufacturing, product design, and mold making, we deliver high-quality surgical, laboratory, and diagnostic devices through precise engineering and robust program management. Job Summary: The Quality Engineer/Supplier QE is responsible for ensuring that products and processes meet established quality standards by identifying shortfalls, developing corrective measures, and implementing quality control systems, acceptance sampling, validations of injection molded, medical device and purchased components used in validated processes. Essential Duties/Responsibilities: • Support Engineering Development and Validation activities., • IQ, OQ, PQ Submissions, • Document IQ, OQ, PQ Protocols, • Document IQ, OQ, PQ Submissions, • Develop PPAP Qualification Documentation per customer PPAP Requirements., • Develop Control Plans, • Develop PFMEA, • Develop Process Flow, • Perform Data Analysis using Minitab, • Capability Analysis, • ANOVA Studies, • Measurement System Analysis (MSA), • Using Problem Solving & Root-cause Analysis Tools:, • 5-why Analysis, • Fishbone Analysis, • Scheduling Brainstorm sessions, • Documenting Continuous Improvement Activities, • Internal Auditor, • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Strong analytical and problem-solving skills., • Strong leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Ability to function well in a high-paced and at times stressful environment., • Proficient with Microsoft Office Suite and Minitab software., • Proficient print reading skills Education and Experience: BS degree preferred. At least 5 years’ related experience required. Physical Requirements: Prolonged periods of sitting at a desk and working on a computer. Must be able to lift up to 15 pounds at times. Visual acuity for inspections, color differentiation, reading electronic documentation. Work Environment: Manufacturing environment requiring appropriate eye protection. Exposure to high noise level in the work environment requiring hearing protection. Gowning and sanitation for manufacturing in a clean room, as applicable. Roechling Medical Rochester is an Equal Opportunity Employer. RMR does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. Job Type: Full-time Pay: $75,000.00 - $95,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance Compensation Package: • 8 hour shift, • Rochester, NY 14615 (Preferred) If you are ready to make a significant impact in the medical device industry with your engineering expertise, we invite you to apply today to join our innovative team at Röchling Medical!

Job Description PROCESS ENGINEER Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions. ESSENTIAL FUNCTIONS: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Vacation, • Sick Days, • Paid Holidays, • Health Insurance, one plan is 100% employer paid!, • Dental Insurance, • Vision Insurance, • Life Insurance, also 100% employer paid!, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The HVAC (heating, ventilation, and air conditioning) Application Engineer for our Equipment business unit to provide support to our sales team and customers. What are we looking for • Associate degree in engineering required., • Ability to multi-task, work under pressure and meet deadlines required., • Desire to work in a team environment. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester owns and operates the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. RED-Rochester is seeking a Utilities Engineer for Electrical Systems and Power Distribution. This role is an important position on the RED-Rochester team that provides stewardship and technical guidance for the operation, maintenance, improvement, and expansion of the Eastman Business Park microgrid in Rochester, New York. The Utilities Engineer shall be the senior technical resource for RED’s overall electrical generation and power distribution systems. Essential Duties and Responsibilities: • Lead in the development and maintain a long-range strategic master plan for the operations, maintenance, hardening, and future expansion of the Eastman Business Park electrical distribution system to meet new customer loads and increasing electrification of RED’s utility assets., • Function as the lead technical resource providing direction in the areas of medium voltage (600V to 34.5KV) distribution equipment, substations, transformers, switchgear, cable, motors and turbine generators., • Provide technical support in the area of low voltage (110V to 600V) distribution equipment, variable frequency drives, and motors., • Provide power systems analysis for load flow and voltage drop, short circuit studies, equipment protection, and coordination, and arc flash studies. Knowledgeable with SKM Power Tools for Windows. Provide power quality analysis as needed relating to harmonics and system disturbances., • Project Management and electrical engineer support for projects both RED originated and customer-driven. This includes oversight of contract project engineers and construction contractors., • Provide Engineering assistance for the day-to-day operations and maintenance of the RED-Rochester low and medium voltage systems., • Coordinate NYISO generator modelling and other NYISO technical requests for market participation as a Behind the Meter Net Generator., • Interface with the local utility to coordinate operation of and changes to the utility interconnect., • Provide Electrical Engineering assistance to all RED operating departments pertaining to building systems. Systems to include HVAC, reliable power, general lighting & power, IT cabling, cameras/security, fire alarms, UPS, etc., • Provide technical guidance to RED’s EHS group relating to electrical safety compliance with applicable NFPA standards.Education/Experience:, • Bachelor’s degree in Electrical Engineering, • Experience in, manufacturing/industrial sites, power generation, power distribution, utility interconnects, and/or business development preferred., • 7 to 10 years’ related experience in electrical engineering, utilities, construction and design of power plants, cogeneration, power distribution, and/or other multi-disciplinary, energy-intensive industrial processes.Qualifications, • Minimum 10 years’ experience in the engineering, construction and design of power plants, cogeneration and/or other multi-disciplinary, energy-intensive industrial processes, • Proficient in MS Office, • New York State PE License is expected for this position. Preferred Certifications/Licenses:, • New York State PE License is expected for this position. Skills/Competencies: • Project management experience in capital or capitalized maintenance projects., • Good communications skills, both verbal and written across the RED-Rochester technical support, operations and maintenance teams, • Ability to deal with outside engineers, contractors and vendors ., • Proficiency in Microsoft Office suite, including Excel and Teams., • Use of Bluebeam Revu, Navisworks, AutoDesk/AutoCAD and Maximo., • Familiarity with SKM Systems Analysis software for Power Systems and Arc Flash. Ability to self-perform modeling a plus., • Strong technical knowledge in the areas of Low (110V to 600V) and Medium (600V to 34.5KV) voltage systems, equipment and metering., • Ability to plan and see the “big picture”. Must be a “results-driven, self-starter” with the desire to bring creative solutions to a dynamic operating environment., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Dedication to highest levels of utility service reliability and customer service, • Ability to work scheduled and unscheduled overtime and respond to off-hour call-ins for emergency support. Work Environment: • Industrial and office environments., • Must work at times in dirty and noisy areas.

Job Description Overview Founded in 2009, Stratosphere Quality has established itself as a leading global provider of quality assurance and outsourcing solutions, including sorting and inspection services, to manufacturers across diverse sectors such as automotive, medical devices, electronics, home appliances, and recreational vehicles. Headquartered just northeast of Indianapolis, Indiana, Stratosphere Quality has a geographic reach that includes the United States, Canada, Mexico, Japan, and China. Stratosphere Quality fosters a positive organizational culture that encourages employees to excel and deliver their best performance. Our team enjoys rewarding and meaningful work in a wide range of manufacturing work environments. Begin a rewarding career today and envision yourself at work with Stratosphere Quality. Quality Support Assistant Rate of pay: $19/hour Stratosphere Quality’s vision is to be the Leading Global Provider of Premium Inspection and Quality Assurance Services. We will create an atmosphere where we recognize the individual, work together to solve problems and foster an environment for employee growth. Top 10 Reasons to work for Stratosphere Quality: Training - On the job training provided Benefits - Medical Benefits, Life Insurance & 401k all after 60 days Advancement Opportunities - After just 90 days of Employment Referral Program - Earn $200 per referral! SQ Rocs - Be rewarded for your hard work President's Club - Be recognized for your hard work Shutdown Savings - Save wages for a rainy day Reimbursement Program - New Equipment on Us! New Tech - Learn and Work with our newest Technology Platforms Travel Opportunities - Gain exposure to different manufacturing processes Responsibilities Major Function The Quality Support Assistant will provide day-to-day administrative, technical, and operational support to the Resident Engineer. This role helps ensure smooth communication between the customer by maintaining accurate reports, documentation and assisting with quality monitoring activities. Key Responsibilities • Assist in preparing, maintaining, and distributing daily, weekly, and monthly quality reports (e.g., scrap, inventory, audit findings)., • Collect and document feedback from customer operations, including photos, defect details, and traceability data., • Support monitoring of customer plant processes, including product inspections, containment activities, and quality alerts., • Assist with sorting, containment, and organizing defective or suspect material as directed., • Track and follow special control batches, test runs, and sample parts; maintain proper documentation., • Provide administrative support during test runs, new samples, and trial builds by preparing notes and ensuring follow-up., • Attend customer floor walks, verification station reviews, and shift start meetings when required; record and circulate meeting notes., • Assist with proactive monitoring and reporting on machining, OEE, and leak test performance., • Help coordinate communication with customer by ensuring timely and accurate reporting., • Participate in quality calls as requested, primarily to document action items and follow-ups., • Maintain organized records of audits, reports and corrective action documentation., • Support problem-solving activities by gathering data, photos, and operator feedback to share., • Ensure compliance with all site, corporate and safety procedures while carrying out responsibilities., • High school diploma required; post-secondary education in Quality, Engineering, or a technical discipline preferred., • 1–2 years of experience in a manufacturing, automotive, or quality-related environment is an asset., • Strong organizational skills and attention to detail., • Ability to collect, analyze, and report data in a clear and concise manner., • Proficiency with Microsoft Office (Excel, Word, PowerPoint, Outlook)., • Strong communication skills (verbal and written)., • Ability to work in a fast-paced environment with changing priorities., • Gain hands-on experience in the automotive and manufacturing industry., • Work closely with experienced quality engineers and customer representatives., • Opportunity to develop technical and problem-solving skills while supporting continuous improvement.

Job Description We are seeking a hands-on and technically driven Quality Engineer to support and strengthen our Quality and Engineering team within a precision CNC machining environment serving the aerospace and defense industries. This role requires strong analytical and problem-solving skills, a proactive floor presence, and the ability to bridge theoretical quality principles with real-time production support. The successful candidate will play a key role in driving continuous improvement, ensuring compliance with industry standards (AS9100, ISO9001, NADCAP), and mentoring quality personnel. Key Responsibilities: • Maintain a strong presence on the production floor to support real-time resolution of quality issues., • Guide operators through inspection procedures and troubleshooting quality concerns on the spot., • Conduct and support various inspection types, including:, • First-Piece, In-Process, Final, and Open Plate Inspections, • Source Inspections and First Article Inspections (FAI), • Oversee CMM operations and programming using Zeiss Calypso (required)., • Utilize precision measuring tools (micrometers, calipers, height gauges, comparators) to validate dimensional tolerances, finishes, and part conformity per GD&T., • Lead and document non-conformances (NCR/INCR), perform root cause analyses (RCA) using tools like 5 Whys, Fishbone Diagrams, FMEA, and develop CAPAs., • Assist with preparing and maintaining PPAP, FAIR, and other aerospace quality documentation., • Audit and ensure adherence to company procedures, quality systems, and regulatory compliance., • Support process control development and collaborate with operations to improve quality at the source., • Specify and order inspection gauges and oversee calibration and gauge control requirements., • Create user-friendly visual aids and inspection documentation for operator use., • Education:, • Bachelor’s degree in engineering, manufacturing, or related field with 3–6 years of quality engineering experience, • OR associate degree with 5+ years of progressive quality experience and strong understanding of quality principles. (Must Have)Required Technical Skills & Experience: * • Expertise in AS9100 (or AS9100D), aerospace quality compliance standards, is required, NADCAP is preferred, and ISO 9001 compliance is required., • Prior experience in aerospace precision CNC machining environments, required., • Proficiency in GD&T interpretation and aerospace blueprint reading, required., • Zeiss Calypso CMM programming experience (required), • Experience with ERP/MRP systems (Epicor preferred), • Familiarity with CAD/CAM models and software like Mastercam or PartMaker, required., • Experience conducting and documenting First Article Inspections (FAI), PPAP, and FAIR, required., • Lean, Six Sigma, or Kaizen knowledge, is preferred.Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: • Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements., • Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments., • May consult with customer’s technical personnel regarding current and upcoming projects or concepts., • Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Able to make decisions on new production quotes and expansion of product lines for customers., • Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing., • Works with manufacturing, quality, and engineering to reduce non-conforming material., • Provide engineering support and input to departments within company., • Assists manufacturing department in development of processes for production., • Authority to cease or allow production on parts that do not meet specs., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations., • May represent Manufacturing/Management Department on cross-function teams., • When requested, may work on special projects and various related assignments. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Bachelors’ of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience., • The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures., • Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel., • Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office), • Ability to provide feedback to drive behaviors of employees., • Able to deal with a variety of abstract and concrete variables.

Job Description Title Senior Thin Film Coating Engineer Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: We are seeking a highly experienced and innovative Senior Thin Film Coating Engineer to lead the design, development, and optimization of advanced optical coatings for precision optics applications. This role is pivotal in supporting high-performance imaging systems, spectroscopy, aerospace, defense, and semiconductor technologies. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: * Design and optimize complex thin film coatings (e.g., AR, beam splitters, bandpass filters) using industry-standard software (TFCalc, Macleod, FilmStar). * Lead development of coating processes using PVD technologies including magnetron sputtering, ion beam sputtering, and electron beam evaporation. * Collaborate with cross-functional teams to translate customer specifications into manufacturable coating solutions. * Perform spectral and interferometric measurements using spectrophotometers and other metrology tools. * Develop and maintain process documentation including FMEA, control plans, and PPAPs. * Troubleshoot coating defects and implement root cause corrective actions. * Mentor junior engineers and technicians; provide technical leadership across coating operations. * Support continuous improvement initiatives using Six Sigma, SPC, and Lean methodologies. * Interface with customers to present technical solutions and ensure product compliance. * Participate in Material Review Board (MRB) activities and disposition of discrepant materials. You Have: • Bachelor of Science in Optical, Electrical, or Mechanical Engineering, or alternatively a Bachelor of Science in Physics. 8–10 years of experience in optical thin film coating design and manufacturing. * Deep understanding of high vacuum systems, deposition physics, and thin film characterization. * Proficiency in coating design software and optical simulation tools. * Strong analytical and problem-solving skills; ability to manage multiple complex projects. * Excellent communication skills, both written and verbal. * Experience in low-volume, high-mix production environments is a plus. • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Excellent computer skills – Email, MS Word, MS Excel, ERP system, • Experience reading and interpreting technical drawings and engineering specs, • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiarity with most optical coating materials and their domain of application You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Akkodis is seeking a PC Architecture Systems Engineer for a direct job with a client in Rochester, NY. Must hold a Bachelor of Science Electrical Engineering to be considered for this position. Will be responsible for creating functional specifications and working with joint development partners to design and release innovative computing hardware product platforms. Work at all levels in the coordination and testing of hardware components and systems targeted to customers along with management of both new and sustaining engineering products. Rate Range: $85/k. to $105/k. The rate may be negotiable based on experience, education, geographic location, and other factors. PC Architecture Systems Engineer job responsibilities include: • Provide system engineering expertise for new product development. Translate market and customer product requirements into desired functionality and specifications, • Design, prepare, perform, and document hardware/software tests on new POS hardware (systems/subsystems/peripherals), • Lead/direct project teams- Prepare meeting agendas/minutes, assign project tasks, resolve product conflicts (desired features vs. possible), plan budgets, coordinate schedules, draft supplier agreements, and prepare/run presentations to stakeholders, • Create and maintain numerous windows based hard drive images (Linux knowledge helpful), • Configure and prepare shipments of hardware systems for customer and prospect evaluation, • Create and maintain product documentation, including new part specifications, production procedures, coordination of engineering changes and product end-of-life planning, • Fosters relationships with domestic and overseas suppliers’ engineering and logistic teams via email, engineering documentation and periodic conference calls, • Deal directly with customers via phone calls/email to resolve escalated issues with minimal supplied details. Meet with domestic and international suppliers and interface with entire company organization including leadership team, remote software associates, and manufacturing associates Desired Qualifications: • Bachelor of Science Electrical Engineering is required., • Minimum Three years related experience., • Experience with and understanding of PC architecture and PC peripheral interfaces is required., • Strong working knowledge of Microsoft operating systems, MS Office applications, and basic mechanical CAD software is required., • Must be able to write software to perform in-house engineering tasks., • Must have experience in Point of Sales If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 585-490-8656 or . Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ___. The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Eastman Business Park is expanding, and we’re seeking a Facilities Engineer in Rochester, New York to support the technical needs of both Kodak and external tenants. This role serves as the primary engineering resource for site and tenant projects, and also acts as the Energy Manager for Kodak EBP buildings. The Facilities Engineer will lead energy reduction initiatives, support modernization efforts, and collaborate with RED Rochester and equipment providers to drive sustainability and operational efficiency. Key Responsibilities • Lead development and execution of energy savings projects in coordination with NYSERDA and internal stakeholders. • Scope and estimate technical projects for Kodak and tenant needs, including risk assessments. • Conduct building walk-throughs to identify energy conservation opportunities across architectural, mechanical, and electrical systems. • Manage consulting engineers performing building audits and develop scopes of work. • Analyze utility rate structures and supply-side options to assess economic impacts., • Use simulation software and spreadsheets to model building operations and retrofit scenarios. • Recommend measurement and verification methods for system performance., • Interface with and optimize building automation systems (DDC, PLC, SCADA platforms). • Troubleshoot control systems and calibrate field instrumentation., • Review construction progress to ensure alignment with energy performance goals., • Analyze data trends and deviations to identify improvement opportunities., • Prepare cost estimates and provide continuous improvement recommendations. Qualifications • Bachelor’s degree in Engineering or a related discipline., • Minimum of 7 years of experience in an industrial/manufacturing environment., • Proven expertise in building systems, utilities, and equipment processes., • Broad knowledge of skilled trades and facility operations. Personal Attributes • Strong customer service orientation with daily interaction across internal and external stakeholders. • Commitment to continuous improvement and operational efficiency., • High level of professionalism, integrity, and discretion., • Knowledge of safe work practices and regulatory compliance., • Excellent verbal and written communication skills., • Strong analytical and problem-solving abilities., • Collaborative team player with flexibility and adaptability., • Effective time management and organizational skills., • Comfortable working in a fast-paced, dynamic environment. Physical Requirements • Ability to lift/move up to 25 lbs (12 kg)., • Regularly required to stand, walk, sit, bend, and communicate., • Occasional work at heights (e.g., step ladders)., • Frequent use of hands and arms for tool manipulation., • Exposure to varying weather conditions., • Some repetitive tasks involving hand tools.

At MVP Health Care, we're on a mission to create a healthier future for everyone - which requires innovative thinking and continuous improvement. To achieve this, we're looking for a Quality Engineer to join #TeamMVP. If you have a passion for quality assurance, creating test cases, and working in an agile environment this is the opportunity for you. What's in it for you: • Growth opportunities to uplevel your career, • A people-centric culture embracing and celebrating diverse perspectives, backgrounds, and experiences within our team, • Competitive compensation and comprehensive benefits focused on well-being, • An opportunity to shape the future of health care by joining a team recognized as a Best Place to Work for and one of the Best Companies to Work For in New York Qualifications you'll bring: • A Bachelor's Degree in Computer Science or related field/relevant work experience., • The availability to work full-time, virtual in New York State, • Minimum of 3 years' experience working as quality engineer required., • 1-3 years' experience working in an agile environment preferred., • Experience in DevOps preferred. One or more of the following preferred: SQL, T-SQL, .NET, C#, SSIS, Playwright, Typescript, Microsoft Dynamics 365 CRM, Genesys Cloud Call Center or IVR telecom, Azure DevOps, API Testing (Postman or Bruno), Performance Testing, Regression Testing, Knowledge of the Healthcare Industry., • Curiosity to foster innovation and pave the way for growth, • Humility to play as a team, • Commitment to being the difference for our customers in every interaction Your key responsibilities: • As a member of a Scrum team, this role is primarily responsible for ensuring quality products are delivered to the organization., • Work with a cross-functional team to understand business requirements and break them into user stories, develop test plans, test cases and execute test scenarios to ensure we are delivering high quality code., • Self-starter who is passionate about quality assurance and can work effectively in an agile environment to ensure commitments are met., • This role will work with the Scrum team to promote high quality, innovative, and scalable solutions., • The role includes but is not limited to the following: Leverage DevOps concepts that promote good quality and automation practices., • Create detailed, comprehensive, well-structured test cases that can be automated. Contribute to automation framework and add test cases over time. Create system or business process flow diagrams., • Utilize structured query language (SQL) for data mining and data seeding purposes. Identify critical path regression scenarios., • Conduct root cause analysis and participate in debugging activities., • Participates in release/sprint planning activities and daily stand-up meetings., • Contribute to our humble pursuit of excellence by performing various responsibilities that may arise, reflecting our collective goal of enhancing healthcare delivery and being the difference for the customer. Where you'll be: Virtual in NY- Must reside in New York State #cs Pay Transparency MVP Health Care is committed to providing competitive employee compensation and benefits packages. The base pay range provided for this role reflects our good faith compensation estimate at the time of posting. MVP adheres to pay transparency nondiscrimination principles. Specific employment offers and associated compensation will be extended individually based on several factors, including but not limited to geographic location; relevant experience, education, and training; and the nature of and demand for the role. We do not request current or historical salary information from candidates. MVP's Inclusion Statement At MVP Health Care, we believe creating healthier communities begins with nurturing a healthy workplace. As an organization, we strive to create space for individuals from diverse backgrounds and all walks of life to have a voice and thrive. Our shared curiosity and connectedness make us stronger, and our unique perspectives are catalysts for creativity and collaboration. MVP is an equal opportunity employer and recruits, employs, trains, compensates, and promotes without discrimination based on race, color, creed, national origin, citizenship, ethnicity, ancestry, sex, gender identity, gender expression, religion, age, marital status, personal appearance, sexual orientation, family responsibilities, familial status, physical or mental disability, handicapping condition, medical condition, pregnancy status, predisposing genetic characteristics or information, domestic violence victim status, political affiliation, military or veteran status, Vietnam-era or special disabled Veteran or other legally protected classifications. To support a safe, drug-free workplace, pre-employment criminal background checks and drug testing are part of our hiring process. If you require accommodations during the application process due to a disability, please contact our Talent team at .