Customer engineer jobs in Binghamton, New YorkCreate job alerts

Job Description The Role - Amphenol Commercial Air is seeking a Test Engineer to work out of its new facility in Endicott, NY. The Test Engineer works with design engineers and test lab personnel to develop test plans, testing setups and perform testing on products and new product applications. Applies sound engineering techniques and practices in performing assigned tasks. The key responsibilities of the Test Engineer include, but are not limited to: • Perform routine and customized machinal and electrical tests on electrical connector and cable assemblies., • Specializing in high voltage (partial discharge) testing and high current (heat rise) testing with the ability to analyze results., • Enhance and develop test procedures for products and new product applications., • Write and review technical memos and engineering reports., • Assist with failure analysis of products under test., • Work with design engineers and design application engineers to develop test plans., • Research equipment, procedural and software enhancements., • Work with outside labs, sister divisions and industry standard committees as necessary. Location • Endicott, NY Salary: $62,354 - $85,000 The Person - The key skills and qualities of a Test Engineer at Amphenol Commercial Air: • Bachelor's Degree in a related Engineering discipline plus a minimum of 2 - 4 years of applicable work experience. An equivalent of education and qualifying experience is acceptable., • Requires a thorough working knowledge of engineering principles as applied to electrical connectors., • Requires a thorough understanding of high voltage and high current electrical principles. Partial discharge and heat rise testing experience is preferred., • Needs to be familiar with Military Specifications/Standards, Industry Standard test methods and equipment for connectors. (ex. EIA-364/ DO-160, EN2591, or similar), • The candidate must be organized, self-motivated, proficient in Microsoft Office Suite and capable of learning and using Amphenol's operating programs., • Physical demands of the job are sitting and typing. Job requires some minor lifting., • Travel as necessary; up to 10% of the time The Company - With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive pay and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job Description The Role - Amphenol Commercial Air is seeking a Design Engineer (Busbars) to work out of its new facility in Endicott, NY. The Design Engineer (Busbars) will focus on flexible and rigid busbars. They must have the ability to make design layouts and production drawings; must be capable of assuring form, fit, and function of components through dimensional studies, and correlate engineering data to customer specifications. The key responsibilities of the Design Engineer (Busbars) include, but are not limited to: • Prepares designs and specifications, assists in generation of layouts, • Creates design standards for high voltage and high-power busbars, • Ability to make drawings for production and customers, • Coordinate the manufacturing of customer prototypes, • Interfaces with other departments for the manufacturing and testing of samples, • Interfaces with customers and vendors to assure conformance to customer specifications, • Interfaces with other departments, suppliers and sister divisions to develop new designs, • Performs the functions required to process estimate requests and marketing product requests, • Prepares and checks drawings as required and process changes, • Performs engineering investigations of manufacturing/quality problems, • Reviews customer documents for compliance with AAO documents and, if necessary, prepares new designs to conform to these documents, • Works collaboratively with others on the engineering team to accomplish required tasks to support the interests of the business, • Keeps supervision informed of status of all activities on a periodic basis Location • Endicott, NY Salary: $62,354 - $85,000 The Person The key skills and qualities of a Design Engineer (Busbars) at Amphenol Commercial Air: • Bachelor’s degree in electrical engineering, mechanical engineering, or related discipline (or equivalent experience), • Experience with flexible and rigid busbars is preferred, • The candidate must have the ability to knowledgably present complex designs; be organized, self-motivated and respond to questions from groups of managers, clients, customers, and the public in a consistent and timely manner, • Willingness to contribute extra effort in support of critical business opportunities, • Ability to manage projects relative to new designs through engineering and qualification testing processes, • Works from either written or oral instructions, with a minimum of supervision, • Ability to maintain dedicated focus on intricate details of engineering designs, • Experience with CAD (Creo or equivalent) and PDM systems (Windchill or equivalent) preferred, • Proficiency in Microsoft Office Suite, • Sitting and typing for long periods of time, • Ability to travel, less than 10% The Company - With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job DescriptionDescription: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option Position Summary The Manufacturing and Sales Engineer is responsible for the link between customers and internal teams, combining technical sales support with manufacturing process expertise. This role is responsible for qualifying customer RFQ’s, cost modeling, contract review, and complete manufacturing process creation. Duties and Responsibilities • Serves as the technical point of contact for customers., • Develops and implements manufacturing processes for CNC milling and turning operations as well as manual machining., • Ensures RFQs are complete, accurate, and actionable to support timely and competitive responses., • Researches part history and costs using tools such as ERP, quoting software, and CAM software., • Partners with operations and production teams to analyze and estimate costs associated with manufacturing customer-specific parts., • Compiles comprehensive quote packages including pricing, lead times, technical specifications, and terms of service., • Participates in Contract Review for new orders., • Collaborates with cross-functional teams to resolve technical questions, minimizing production downtime and ensuring workflow continuity., • Other duties as required to improve the quoting and manufacturing process. Requirements: Position Qualifications • Bachelors degree in Engineering or related discipline preferred., • 10+ years of contract manufacturing experience specializing in precision machined components with preference for those with aerospace part production preferred. Knowledge, Skills, and Abilities • Experience with aerospace & defense OEMs, • Understands technical drawings and GD&T, • Has practical experience with Milling, Turning, & EDM processes, • Has experience quoting and identifying which machining processes are appropriate, • Understands materials, components, treatments, and finishes used in manufacturing aerospace components, • Proficient using manufacturing software (CAD/CAM, quoting, file viewers, etc)., • Ability to function as a team player., • Ability to work with scheduled deadlines. Physical Requirements/Abilities (If necessary) • Position may require lifting up to 50 pounds, prolonged periods of standing, and occasional bending or squatting., • Candidates should be able to comfortably perform physical tasks associated with the role, ensuring a safe and productive work environment., • Ability to sit for long periods of time.

Job Description The Role Amphenol Military High Speed is seeking a Design Engineer to work out of its new facility in Endicott, NY. The key responsibilities of this Design Engineer include, but are not limited to: • Prepares designs and specifications, assists in generation of layouts, • Prepares and checks drawing and processes changes as required for production and customers, • Assure form, fit, and function of components through dimensional studies, and correlates engineering data to customer specifications, • Interfaces with other departments for the manufacturing and testing of samples, • Interfaces with customers and vendors to assure conformance to customer specifications, • Coordinates the manufacturing of customer prototypes, • Performs the functions required to process estimate requests and marketing product requests, • Performs engineering investigations of manufacturing/quality problems, • Reviews customer documents for compliance with AMHS documents and if necessary, prepares new designs to conform to these documents, • Works closely with the Business Development Managers and Product Managers of various business units, • Regularly and proactively communicates with customers, Marketing, Manufacturing, Quality, Process, Purchasing, and experimental personnel Location • Endicott, NY Salary: $62,354 - $85,000 The Person The key skills and qualities of a Design Engineer at Amphenol Military High Speed: • Bachelor's degree in mechanical engineering or a related field, • Experience in design or design engineering, • Experience with AutoCAD and/or Creo is preferred, • Ability to work from written and oral instruction, with minimum supervision, • Possesses a working knowledge of PTC Creo and Windchill, • Ability to work collaboratively with others on the Design Engineer team to accomplish required tasks to support the interests of the business, • Ability to maintain a dedicated focus on intricate details of engineering designs, • Willingness to contribute extra effort in support of critical business opportunities, • Proactive periodic communication to manager regarding status of activities, • Willing to travel (15 to 20%), • Prolonged periods of sitting and computer usage The Company With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, and Nogales, MX, Amphenol Military High Speed specializes in rugged high-speed connectors, cables, assemblies, ethernet switches, media converters, and more in copper, fiber optics, or both. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive pay and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job Description The Role - Amphenol Commercial Air is seeking a Design Engineer to work out of its new facility in Endicott, NY. The Design Engineer must have the ability to make design layouts and production drawings. Must be capable of assuring form, fit, and function of components through dimensional studies, and correlate engineering data to customer specifications. The key responsibilities of the Design Engineer include, but are not limited to: • Prepares designs and specifications. Assists in generation of layouts., • Interfaces with other departments for the manufacturing and testing of samples., • Interfaces with customers and vendors to assure conformance to customer specifications., • Possess a working knowledge of PTC Creo and Windchill., • Ability to make drawings for production and customers., • Coordinate the manufacturing of customer prototypes., • Perform the functions required to process estimate requests and marketing product requests., • Review customer documents for compliance with ACAD documents and if necessary, prepare new designs to conform to these documents., • Travel to customers, suppliers and sister divisions as needed, anticipated to be minimal., • Keep supervision informed of status of all activities on a periodic basis., • Works closely with the Business Development and Product Managers of various business units. Location • Endicott, NY Salary: $62,354 - $85,000 The Person The key skills and qualities of a Design Engineer at Amphenol Commercial Air: • Bachelor’s degree in mechanical engineering or a related field, • Experience in design or design engineering, • Experience with AutoCAD and/or Creo is preferred but not required, • Communications with customers, marketing, manufacturing, quality, process, purchasing, and experimental personnel., • Prepares and checks drawings as required and processes changes., • Performs engineering investigations of manufacturing/quality problems., • Works from either written or oral instructions, with a minimum of supervision., • Work collaboratively with others on the design engineering team to accomplish required tasks to support the interests of the business., • Ability to maintain dedicated focus on intricate details of engineering designs., • Willingness to contribute extra effort in support of critical business opportunities., • Sitting and typing for long periods of time., • Ability to travel, less than 10%. The Company - With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job Description The Role Amphenol Military High Speed is seeking an Electrical Engineer to work out of its state-of-the-art facility in Endicott, NY. The key responsibilities of this Electrical Engineer include, but are not limited to: • Develops product designs and/or test methods, • Performs or defines complex tests for evaluation of product, equipment or processes, • Works independently in planning and coordinating resources necessary to complete assignments, • May assist with creating major product presentations, • Reviews and analyzes a variety of data to determine requirements for meeting engineering objectives, • Interacts independently with customers, vendors, and Amphenol personnel on significant design, process or evaluation issues, • May direct other employees, • Coordinates and provides support to other departments within the Company Location • Endicott, NY Salary: $62,354 - $85,000 The Person The key skills and qualities of an Electrical Engineer at Amphenol Military High Speed: • Bachelor's Degree in related engineering discipline or equivalent education and experience, • Experience with Computer-Aided Design (Mentor Graphics PADS or equivalent) required, • Background with fiber optic communication preferred, • Familiarity with C, C#, FPGA, or python software preferred, • Proficiency with Microsoft Office required, • Is innovative and demonstrates significant ingenuity in problem solving and suggesting plans of action, • Prolonged periods of sitting and computer work, • Work collaboratively with others on the design engineering team to accomplish required tasks to support the interests of the business, • Ability to maintain dedicated focus on intricate details of engineering designs, • Willingness to contribute extra effort in support of critical business opportunities The Company Leveraging manufacturing sites in Sidney, NY, Endicott, NY, Mesa, AZ, and Nogales, MX, Amphenol Military High Speed designs and manufactures the world's best rugged connectors, switches, media converters, and cable assemblies for demanding military and aerospace applications in harsh environments. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive pay and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job Description The Role Amphenol Military High Speed is seeking a Systems Engineer to work out of its new facility in Endicott, NY. The key responsibilities of this Systems Engineer include, but are not limited to: • Develop, analyze, and manage system-level requirements, ensuring traceability from customer needs through design, implementation, and verification, • Perform system architecture development, trade studies, and technical analyses to support design decisions, • Interface with cross-functional teams including hardware, software, test, manufacturing, quality, and program management, • Support system integration, verification, and validation activities, including test planning and results analysis, • Identify technical risks and support mitigation planning and execution, • Participate in technical reviews (SRR, PDR, CDR, TRR, etc.) and customer engagements, • Ensure compliance with applicable standards, specifications, and contractual requirements, • Support configuration management, change control, and technical documentation activities Location • Endicott, NY Salary: $62,354 - $85,000 The Person The key skills and qualities of a Systems Engineer at Amphenol Military High Speed: • Bachelor's degree in Systems Engineering, Electrical Engineering, Mechanical Engineering, Computer Engineering, or related technical discipline, • 3–5 years of systems engineering or related technical experience, • Experience with requirements management tools (e.g., DOORS, Jama) preferred, • Familiarity with system development lifecycle processes and verification methodologies, • Strong systems thinking and problem-solving skills, • Ability to decompose complex problems into structured requirements and architectures, • Clear written and verbal technical communication skills, • Experience working in multidisciplinary engineering teams, • Attention to detail with an understanding of overall system impacts, • Ability to balance technical rigor with schedule and cost constraints, • Ability to sit or stand for extended periods while working at a computer, • Occasional lifting of up to 25 pounds, • Ability to access manufacturing or test environments as required The Company With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, and Nogales, MX, Amphenol Military High Speed specializes in rugged high-speed connectors, cables, assemblies, ethernet switches, media converters, and more in copper, fiber optics, or both. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive pay and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job Description The Role - Amphenol Commercial Air is seeking a Development Engineer to work out of its new facility in Endicott, NY. The Development Engineer is responsible for new product development engineering activities, working closely with Design Engineers and Design Application Engineers to prototype and refine product designs. Hands-on role responsible for building and validating prototypes and helping drive improvements to internal development processes. The key responsibilities of the Development Engineer include, but are not limited to: • Responsible for product development engineering activities from concept through initial design validation, • Build test, and iterate on physical prototypes to validate design intent, form, fit, and function, • Work closely with Design Engineers and Design Application Engineers to prototype and refine product designs based on customer and application requirements, • Performs hands-on prototyping utilizing onsite 3D printing, machining and molding equipment; works with other departments and vendors to facilitate the build of more complex components/ assemblies, • Collaborate with Product Engineers and Manufacturing Engineers to ensure designs are manufacturable to support a smooth transition from prototype to production, • Coordinate with outside vendors to source prototype components, tooling, and materials, • Identify and drive improvements to internal prototyping and product development processes, working closely with Amphenol sister divisions, • Document design iterations, test results, and lessons learned to support engineering change processes and design history, • Support root cause analysis and design refinement based on test data and manufacturing feedback, • Prepares and manages planned programs, with or without subordinate responsibility Location • Endicott, NY Salary: $62,354 - $85,000 The Person The key skills and qualities of a Development Engineer at Amphenol Commercial Air: • Bachelor’s degree in electrical engineering, mechanical engineering, or related discipline (or equivalent experience), with +1 years of relevant experience, • Demonstrated hands-on experience in product development and prototyping, • Experience with CAD (Creo or equivalent) and PDM systems (Windchill or equivalent) preferred, • Practical experience with 3D printing/additive manufacturing and basic machining is required, • Experience with electrical connectors or related aerospace products is preferred, • Experience with component molding is preferred, • Proficiency in Microsoft Office Suite, • Ability to travel < 10% of the time, • Must be able to sit, stand or walk for prolonged periods of time, • Use of a computer from 1 to 8 hours a day, • Ability to lift and carry up to 20 pounds, • Possible travel domestic or overseas The Company - With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job Description Field Engineer – Networking/Servers Pay Rate: $35.00/HR W2 Hours: Monday-Friday, 9am-6pm Location: Endicott, NY 13760 Duration: Open-ended contract Job Summary: Supermicro is seeking a Field Engineer who will be responsible for fieldwork at customer sites to resolve and repair server systems. The Field Engineer is a critical part of post-sales support and needs to demonstrate exceptional technical aptitude in working with server products in addition to excellent interpersonal skills. It requires the ability to support our Global Service network and help build a world-class Field Engineering organization. Essential Duties and Responsibilities: • On-site and remote troubleshooting and resolving complex technical problems on Supermicro equipment in an enterprise environment, • Drive customer satisfaction through service excellence by leading preventive maintenance actions, managing repair/parts cycle times, • Ensure escalation situations are managed and corrected quickly and professionally, • Provide 2nd line support to the reseller/distributors in all aspects of customer support, • Have a very high level of enterprise solution product knowledge, • Work with Technical Account Manager, Service Manager, and Product Manager to define service programs, • Provide and contribute information such as fault triage and training materials, • Run tests and simulations at our facility to assist with problem-solving, • Travel to the field to train and or resolve customer issues, • Train new service engineers, • Able to work under the Technical Account Manager's direction and take ownership of customer base, • Demonstrate the ability to be self-sufficient in the field, • Able to defuse challenging situations, • Manage time effectively; prioritize and make good business judgments and decisions in relationship to efficiency, and effectiveness while meeting daily service expectations, • Determines requirements and/or root cause of technical issues by working with customers, • Resolves problems by clarifying issues; researching and exploring answers and alternative solutions; implementing solutions; escalating unresolved problems, • Ability to produce meaningful reports and metrics is a plus, • Ability to lift 35-lbs. Qualifications: • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, or equivalent work experience preferred, • Minimum of 3 years’ experience in field support servicing complex X86 systems and parts preferred, • Will consider an associate degree in electrical technology, electronics, or equivalent military experience, • Work experience in large enterprises or certification in Windows and Linux environments is a plus, • Emphasize break/fix experience and on-site customer service experience, • Hands-on experience with servers (Supermicro, EMC, DELL, HP), • Solid hardware system diagnostics skills, as well as a good understanding of how BIOS, drivers, and application loads can cause system issues, • Strong technical communication skills to lead investigations with engineers of multiple disciplines, • Strong written and verbal communication skills, project management skills, and solid time management skills, • Be able to participate in multiple cross-functional projects concurrently in a rapidly changing environment, within established timelines and have a demonstrated ability to learn and embrace new and changing technologies, • Ability to work in a challenging, dynamic, and fast-paced environment with the ability to identify and escalate issues promptly, and be proactive in driving solutions, • Full professional proficiency in English (read/write/speak), • Familiarity with Linux is a plus \nCompany Description About Murtech Staffing & Solutions - We are a National Staffing Services Company with a team dedicated to solving the unique staffing challenges for our clients. The essence of Murtech is built in our Core Values: Integrity, Passion and Work Ethic. We apply these values to provide professional career development for both our employees and candidates. About Murtech Staffing & Solutions - We are a National Staffing Services Company with a team dedicated to solving the unique staffing challenges for our clients. The essence of Murtech is built in our Core Values: Integrity, Passion and Work Ethic. We apply these values to provide professional career development for both our employees and candidates.

Job Description The Role Amphenol Military High Speed is seeking a Quality Engineering Lead to work out of its new facility in Endicott, NY. The key responsibilities of the Quality Engineering Lead include, but are not limited to: • Analyze and discuss quality concerns with manufacturing departments; identify, prioritize, and address all significant and repetitious quality problems, • Initiate and verify the effectiveness of formal corrective actions, • Maintain thorough knowledge of ISO-9001, AS-9100, Amphenol's Quality Manual, and subordinate procedures, • Enforce quality policies, • Maintain working knowledge of products, associated processes, and state of the art inspection techniques like AOI (automated optical inspection), • Conduct quality audits when appropriate and when assigned, • Take prudent actions to achieve continuous improvement in reducing cost of non-quality and customer returns, • Investigate and disposition customer returns involving product from area of responsibility, • Assign workloads to hourly inspection teams, • Manage hourly inspector work schedules Location • Endicott, NY Salary: $70,000 - $90,000 The Person The key skills and qualities of a Quality Engineering Lead at Amphenol Military High Speed: • Engineering degree required or equivalent related experience in an industrial/manufacturing environment, • Five to ten years' experience as a Quality Engineer with one to three years' supervisory/lead engineer experience preferred, • Knowledge of statistical methods, • Proficiency with Microsoft Office and Data3 software, • Ability to understand and apply all types of quality and engineering documents, specifications, drawings, reports and forms, current quality practices, and engineering terminology, • Ability to work extensively with Amphenol's systems, including the AS400 main frame and local network, • Ability to work cross functionally in a smaller, diverse work environment, • Ability to develop and maintain constructive professional relationships with peers and customers, • Strong interpersonal and communication skills (both written and verbal), • Ability to work in a fast-paced environment, • Ability to travel freely throughout a manufacturing floor environment, • Some lifting and carrying of small loads required (up to 50 pounds), • Occasional travel to customers and the Mesa & Nogales facilities to resolve, or explain prevention of cited quality issues (15 – 20%) The Company With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, and Nogales, MX, Amphenol Military High Speed specializes in rugged high-speed connectors, cables, assemblies, ethernet switches, media converters, and more in copper, fiber optics, or both. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive pay and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

You will work directly with our engineering team, triaging and investigating bug reports so being super savvy with modern websites and issues SaaS-type applications run into will come in handy. Triage with sound judgment — escalate true engineering issues and resolve others via configuration, prom

You will work directly with our engineering team, triaging and investigating bug reports so being super savvy with modern websites and issues SaaS-type applications run into will come in handy. Triage with sound judgment — escalate true engineering issues and resolve others via configuration, prom

Job Description PYRAMID Business Systems, a locally owned and fully insured IT consulting, support, and security firm located in Binghamton, NY, with a history spanning 35 years, is currently seeking an experienced network engineer. The ideal candidate will possess a robust network competency and hold industry-recognized certifications. PYRAMID offers a competitive salary and benefits package, commensurate with experience and certifications. Job Summary: The primary responsibility of this role is to assist in the design, implementation, maintenance, and support of technology environments for both SMB and enterprise clients. This encompasses a diverse range of technologies including Windows, Hyper-V, VMware, Storage solutions, Active Directory, O365, and development support for systems and applications infrastructure. The candidate should be proficient in managing all phases of server and desktop processing/operating systems, capable of handling complex problems across multiple technology platforms. Duties/Responsibilities/ Essential functions: • Administering Windows servers and maintaining Microsoft Active Directory configurations., • Supporting and managing all O365 related products., • Designing and managing application interfaces and dependencies., • Providing architectural design and support for various application platforms., • Developing and maintaining comprehensive platform network documentation., • Offering tier 3 troubleshooting support as necessary., • Implementing and configuring new servers, workstations, printers, firewalls, switches, wireless access points, group policies, etc., • Diagnosing, troubleshooting, and resolving hardware, software, and network infrastructure issues., • Executing network security measures to safeguard client environments., • Researching and evaluating new technologies to meet client IT requirements., • Providing both remote and onsite support to clients. Required Skills and Abilities: Experience (5+ years): • Advanced triage and troubleshooting capabilities, • Comprehensive understanding of network concepts, • Expertise in network administration, including layer 3 switching, firewalls, and wireless networks, • In-depth knowledge of network and application security, • Proficiency in Active Directory, • Extensive experience with Windows Servers, • Competence in VPN and remote connectivity, • Advanced knowledge of Microsoft technologies such as Azure, Microsoft 365, Microsoft Entra ID/AADDS, Active Directory Domain Services, Windows 11, Windows Server 2025+, DHCP, and DNS, • Availability to work nights and weekends as required for project completion or issue resolution, • Strong project management skills, • Experience with managing technology, • Exceptional problem-solving and troubleshooting abilities, • Professional and effective communication skills, • Ability to work as part of a team, • Possession of reliable transportation and valid driver's license, • Background check required Qualifications: • Prior experience in service desk or technical support roles is required, • High level of diplomacy and strong interpersonal skills, • Customer service-oriented mindset, • Exceptional troubleshooting skills Education and Experience: • High school diploma or equivalent; Bachelor’s degree; or a combination of education and experience that provides the knowledge, skills, and abilities perform required duties effectively, • Experience in network administration, • IT-related certifications are an advantage Job Type: Full-time Pay: From $25.00 per hour Benefits: • 401(k), • Health insurance, • Paid time off Compensation Package: • Bonus opportunities, • Hourly pay, • Overtime pay Ability to Commute: • Endicott, NY (Preferred) Ability to Relocate: • Endicott, NY: Relocate before starting work (Preferred) Work Location: In person

Job Title: Electrical Engineer Substation - Lead Location: Binghamton, NY (Kirkwood), Rochester, NY.Work type: OfficeThe salary range for this position is dependent upon experience, ranging from $116,640 to $145,800.Job Summary Responsible for Substation designs for major capital projects in New York (NYSEG and RG&E), this includes input into standards and training needs. The electric delivery system in New York contains approximately 5,600 miles of transmission lines & 621 substations.Position reports to the Substation Projects Coordinator, but the position will work day-to-day in a cross-functional project team and support project needs as dictated by the project manager.Responsibilities:Capital project engineering performance including all phases such as scoping and budgeting, conceptual engineering, contract management and design, engineering design, construction and closeout.Perform standard and complex electrical engineering analyses, designs and calculations using standard methodology and principles and other viable approaches.Develop alternate methods or design concepts to resolve problems or to improve processes/servicesResponsible for leading and creating new conceptual designs and overseeing the work of external detailed designers.Solve unique and complex electrical engineering problems.Analyzes possible solutions and assesses each using standard procedures related to lines and power engineering.Ensure all engineering designs implemented by the company meet applicable company, local, state, and national codes and standards.Support technical requests from current and proposed customersUtilize knowledge to influence and guide department engineers.Provide technical leadership in complex projects that have a wide impact on the department.Mentor, develop and support team in technical skills.Ability to collaborate across departmentsLiaison/ direct contractors on company policy, standards and best practices.Work independently with little supervision.Required Qualifications:Required Education:Bachelor’s degree in electrical engineering and 7 years minimum of relevant experience required.Technical Skills/Competencies:Theoretical Engineering knowledge - Planning, Operations and Engineering Design, Analytic, modeling & Calculation, understanding the business model; Global View of the Business (Values cross-functional collaboration, understands importance of growing knowledge and developing relationships and links across the organization.Practical engineering experience/application - Planning, Operations and Engineering Design, Construction, (e.g., field experience, standardization "Perform economic analyses of engineering alternatives, develop business cases and defend in front of stakeholders.") Engineering documentation # Ability to adequately document and interpret engineering documentation.Ability to review and approve engineering work done by others - to ensure compliance with company standards, specifications, and contract requirements.Knowledge of Regulatory and Compliance Environment # Local, State and Federal Regulatory Standards and requirements.General Skills:Excellent diagnostic and problem-solving skills to decipher unique technical and analytical problems.Proven ability to lead and manage projects.Strong communication and interpersonal skills to articulate highly technical concepts.Strong management and leadership skills, ability to drive change and adoption of new technologies.Knowledge of the regulatory environment, including relevant output and incentive mechanisms.General contract, commercial and regulatory awareness with the ability to balance effective and efficient customer service and project delivery, ensuring maximum return on investment.Track record of effective stakeholder and customer service engagement and management.Ability to communicate and present information effectively at all levels.Ability to manage competing priorities using sound engineering and financial judgment to determine optimal solutions.Awareness and understanding of key business drivers.Ability to devise solutions to both common and complex problems/challenges.Where appropriate, technical and operational experience in a relevant engineering role within a utility environment.Where required, knowledge of:Construction and maintenance standards in accordance with regulatory requirements - Engineering standards and specifications up to 345k.Routine Technical Skills:Physical Substation Design - ExpertProject Scoping and Estimating - ExpertEquipment Specifications - ExpertConstruction and Outage Sequencing - ExpertCommissioning - ExpertAC/DC Loading Calculations - ExpertCodes, Standards, and Regulations - ExpertUnique Technical Skills:Substation Grounding- Expert/Competent1Thermal Ratings- Expert/Competent1Lightning Analysis- Expert/Competent1Lighting Analysis- Expert/Competent1Transient Analysis- Expert/Competent1Insulation Coordination- Expert/Competent1Substation Equipment Commissioning - Expert/Competent1Preferred Qualifications:Professional Engineering License.Behavioral Competencies: • Develop self & others• Empower to grow• Collaborate and share• Be a role model• Focus to achieve results• Be agile#LI-NB1#LI-officeCompany:NY STATE ELECTRIC & GAS CORPMobility InformationPlease note that any applicant who is not a citizen of the country of the vacancy will be subject to compliance with the applicable immigration requirements to legally work in that country.At Avangrid we provide fair and equal employment and advancement opportunities for all employees and candidates regardless of race, color, religion, national origin, gender, sexual orientation, age, marital status, disability, protected veteran status or any other status protected by federal, state, or local law.If you are an individual with a disability or a disabled veteran who is unable to use our online tool to search for or to apply for jobs, you may request a reasonable accommodation by contacting our People and Organization department at careers@avangrid.com.Avangrid employees may be assigned a system emergency role and in the event of a system emergency, may be required to work outside of their regular schedule/job duties. This is applicable to employees that will work in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate functions. This does not include those that will work for Avangrid Power.Avangrid employees may also be assigned a NERC Reliability Standards compliance role supporting Critical Infrastructure Protection (CIP) and/or Operations and Planning (O&P) responsibilities. This is applicable to employees that will work in electric transmission, operations, and cyber security business areas in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate business areas. NERC Reliability Standards compliance roles and responsibilities may include additional access protections, training, audit engagement, and required evidence retention, and will be communicated by the employee’s management.Job Posting End Date:November-30-2026SummaryLocation: United States Of America, New York, Binghamton; United States Of America, New York, RochesterType:

Job Description The Role - Amphenol Commercial Air is seeking a New Product Development Engineering Supervisor to work out its new facility in Endicott, NY. The New Product Development Engineer Supervisor is responsible for leading the New Product Development (NPD) engineering team, a multifunctional engineering team focused on the development of electrical connectors and busbars. This role is responsible for prototyping and validation testing in support of new product development and provides leadership and direction to a team of engineers to achieve departmental objectives. The incumbent must be technically strong enough to knowledgeably guide and support direct reports on hands-on design, prototyping, and test work, and will personally perform hands-on tasks as needed. The key responsibilities of the New Product Development Engineering Supervisor include, but are not limited to: • Responsible for supervision, mentorship, and development of multidisciplinary engineering team consisting of Design, Development, and Test Engineers supporting new product development for electrical connectors and busbars setting priorities and balancing workload across concurrent programs., • Provide technical oversight and hands-on guidance across the product development lifecycle – from concept through prototyping, validation testing, and design transfer to production., • Leads and actively participates in product development efforts including; design reviews, project execution, and manufacturing transition., • Leads performance management, including coaching, development, and formal reviews of team members., • Provides technical support and coordination across internal departments, including Operations and Quality., • Ensures the team is properly trained and safe on 3D printers, molding presses, laser cutters, diffusion welders, and other shop/lab equipment., • Works closely with Design and Design Application Engineers, to refine products based on customer and application requirements., • Identifies and drives improvements to internal prototyping and product development processes, working closely with Amphenol sister divisions Location - • Endicott, NY Salary $90,000 - $125,000 The Person - The key skills and qualities of a New Product Development Engineering Supervisor at Amphenol Commercial Air: • Bachelor’s degree in electrical engineering, mechanical engineering, or related discipline (or equivalent experience), with 3+ years of relevant experience., • Demonstrated hands-on experience in product development and prototyping, with the ability to knowledgeably support and step in on hands-on work as needed is required., • Experience with electrical connectors or related aerospace products is preferred; experience with flexible busbars, high power, or high voltage products is a plus., • Practical experience with 3D printing/additive manufacturing, molding, laser cutting, diffusion welding, and/or basic machining is preferred., • Experience with CAD (Creo or equivalent) and PDM systems (Windchill or equivalent) preferred., • Familiarity with industry test standards such as DO-160, EIA-364, EN2591, or similar is preferred., • Proficiency in Microsoft Office Suite, • Strong communication, organizational, and cross-functional collaboration skills., • Strong analytical and problem-solving skills., • Proven ability to lead and motivate teams with diverse technical backgrounds., • Excellent communication skills with experience mentoring engineers and developing technical documentation, • Ability to travel < 10% of the time., • Must be able to sit, stand or walk for prolonged periods of time., • Use of a computer from 1 to 8 hours a day., • Ability to lift and carry up to 20 pounds., • Possible travel domestic or overseas. The Company - With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers competitive pay and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job Description The Role Amphenol Military High Speed (AMHS) is seeking skilled and experienced Network Computer and Software Engineers to join our team, responsible for the software design of rugged electronics. As a Network Computer or Software Engineer, you will play a crucial role in the development and maintenance of robust, reliable, and high-performance networking solutions for challenging environments. Your expertise in hardware design and software development will contribute to the success of our products and ensure seamless connectivity for our customers. The key responsibilities of this Network Computer or Software Engineer include, but are not limited to: • Design and develop rugged electronics, considering the unique challenges of harsh environments, such as extreme temperatures, humidity, vibration, and electromagnetic interference., • Collaborate with cross-functional teams, including hardware engineers, software developers, and product managers, to define product requirements and specifications for rugged electronics., • Conduct feasibility studies and make recommendations on the hardware and software architecture of networking solutions, taking into account factors like power consumption, performance, scalability, and cost-effectiveness., • Develop and implement embedded software for rugged electronics, including device drivers, protocols, and management interfaces, ensuring compatibility, reliability, and security specifically as it relates to Ethernet Switch functionality., • Conduct thorough testing and verification of software modules, identifying and resolving any issues or performance bottlenecks., • Collaborate with manufacturing and production teams to ensure seamless transition from design to mass production, addressing any manufacturing challenges and ensuring the highest quality standards., • Stay updated with the latest advancements in networking technologies, industry trends, and standards, and apply this knowledge to enhance the performance and functionality of our rugged electronics., • Provide technical support and expertise to internal teams, customers, and partners regarding hardware deployments, troubleshooting, and maintenance of rugged electronics., • Participate in the documentation process, including creating technical specifications, user guides, and application notes for rugged electronics. Location: Endicott, NY Salary: $65,000 - $110,000 The Person The key skills and qualities of a Network Computer or Software Engineer at Amphenol Military High Speed: • Bachelor's or master's degree in Electrical Engineering, Computer Engineering, Computer Science, Software Engineering, or a related field., • Proven experience as a Network Engineer, with a focus on software design of rugged networking equipment, preferably related to Ethernet., • Strong understanding of networking protocols, including Ethernet, VLAN, Spanning Tree, QoS, SNMP, and TCP/IP., • Experience in embedded software development using programming languages like C/C++ and familiarity with real-time operating systems (RTOS)., • Knowledge of network security principles, encryption algorithms, and secure protocols., • Familiarity with industrial and ruggedization standards (e.g., MIL-STD, IP rating, shock/vibration resistance) is highly desirable., • Strong problem-solving skills and the ability to analyze complex technical challenges., • Excellent communication and collaboration skills to work effectively in a cross-functional team environment., • Attention to detail, with a focus on delivering high-quality products and solutions. The Company With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, and Nogales, MX, Amphenol Military High Speed specializes in rugged high-speed connectors, cables, assemblies, ethernet switches, media converters, and more in copper, fiber optics, or both. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive pay and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law