Digital designer jobs in East Orange, New JerseyCreate job alerts

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Power Electronics Engineer to design and develop the HTS magnet power supply systems for the company’s Eos integrated stellarator. This role focuses on building a high-current AC-DC converter for HTS magnets, requiring precision current regulation, high reliability, and scalable architecture. This role will be responsible for power stage design, topology selection, control algorithm interface, and protection systems, as well as thermal and mechanical integration. This is a high-impact engineering role with hands-on prototyping, testbed validation, and cross-functional collaboration with embedded systems and instrumentation teams. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the topology selection, component specification, and schematic design of the HTS Magnet PSU., • Design modular power converters with potential for arrayed operation and independent control., • Analyze and simulate power converter behavior (steady-state, dynamic, fault response) using PLECS, LTspice, or Simulink., • Integrate with embedded control hardware and firmware, ensuring proper current regulation, fast feedback, and fault handling., • Define and implement magnet protection mechanisms, including overcurrent shutdown, fast discharge, and crowbar circuits if needed., • Design thermal management systems, including heat sink layout, forced air/water cooling, and temperature monitoring for continuous operation., • Design PCB layout and support mechanical integration, cabling, and in-house assembly., • Develop test plans and perform hardware bring-up, debugging, and parameter optimization under staged load conditions.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Electronics, or a related field., • 5+ years of hands-on experience designing and testing power converters, preferably in high-current or magnet power supply applications., • Proficiency in power stage design for DC/DC converters, buck/boost, full-bridge, or current-regulated linear stages., • Strong simulation and modeling skills using tools such as PLECS, LTspice, PSIM, Simulink, or Simplorer., • Experience with IGBTs, MOSFETs, SiC/GaN devices, and high-current busbar and interconnect layout., • Familiarity with current sensors, signal conditioning, and analog control circuits., • Experience with magnet power supplies, fusion, accelerator, or industrial high-current systems., • Knowledge of quench detection, crowbar protection, and superconducting magnet interface requirements., • Experience with thermal design and integration of cooling solutions in power electronics., • Exposure to EMI/EMC mitigation strategies and compliance testing., • Familiarity with FPGA- or DSP-based digital control systems., • Simulation: PLECS, LTspice, PSIM, Simulink., • CAD: Altium Designer, OrCAD., • Measurement: Oscilloscopes, Power Analyzers, Electronic Loads., • Communication: CAN, RS-485, Modbus., • Thermal: Flotherm, SolidWorks for mechanical integration.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a highly skilled Electronics Hardware Design Engineer to lead the design and development of electronics, power electronics, and embedded control hardware for the Power Supply Systems, and Data Acquisition Units for the Control System of the Eos Stellarator. This engineer will be responsible for creating high-performance, reliable electronics to interface between control firmware, power conversion hardware, and diagnostics subsystems. The role includes schematic capture, PCB layout, component selection, hardware bring-up, and cross-functional integration with power electronics, software, and system engineers. This is a hands-on, lab-focused role with a critical impact on the development of the control core of a fusion energy system.Key Responsibility Areas: • Design and develop custom embedded control boards including:, • ARM, DSP, and/or FPGA/SoC based controller boards, • ADC/DAC interfaces, digital I/O, sensor front-ends, • Gate driver boards and opto-isolated switching logic, • Generate schematics and PCB layouts with a focus on signal integrity, high-current and/or high-voltage handling, and isolation., • Develop interface circuitry between embedded controllers and the power stage: current/voltage sensing, PWM outputs, fault inputs, and communication buses., • Select and source components based on performance, reliability, and availability., • Build and test prototypes, perform hardware bring-up, debugging, signal probing, and validation under operating conditions., • Collaborate with embedded firmware developers to ensure hardware/software compatibility and deterministic real-time behavior., • Work closely with power electronics engineers to ensure optimal mechanical, thermal, and electrical integration., • Implement EMI/EMC mitigation techniques, isolation strategies, and power integrity best practices.Ideal Experience & Skillsets:Required Qualifications:, • Bachelor’s or Master’s degree in Electrical Engineering, Electronics Engineering, or related field., • 5+ years of experience in embedded hardware design for power systems, control systems, or instrumentation., • Expertise in:, • Analog and mixed-signal circuit design, • High-speed digital interfaces (SPI, I2C, UART, RS-485, CAN, Aurora), • Signal conditioning for sensors and actuators, • Proficiency in schematic capture and PCB layout tools: Altium Designer or OrCAD, • Hands-on experience with:, • Oscilloscopes, logic analyzers, and multimeters, • Board-level debugging, rework, and signal probing, • Strong understanding of PCB stackups, thermal design, creepage/clearance, and layout for high-current environments Preferred Qualifications: • Experience working on control electronics for power supplies, motor drives, or magnet systems, • Knowledge of gate driver design, isolation techniques, and fail-safe circuitry, • Familiarity with EMI/EMC compliance standards and mitigation techniques, • Exposure to RTOS- or FPGA-based control systems and real-time embedded integration Tools & Platforms: • Design Software: Altium Designer, OrCAD, LTSpice, PLECS (for co-design), • Lab Tools: Oscilloscopes, spectrum analyzers, signal generators, logic analyzers, • Interfaces: UART, SPI, I2C, RS-485, RS-232, CAN, FlexRay, Aurora, PWM, ADC/DACCompany Benefits:, • Salary range $110,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionTruVolt Brands (Snow Joe®, Sun Joe®, Aqua Joe®, Auto Joe®, and Jetson) is a fast-growing consumer products company on a mission to disrupt historically gas-driven market sectors with top-quality, reliable, and easy-to-use innovations that are affordable and eco-conscious. With a portfolio of over 500 products spanning electric and battery-powered outdoor power equipment, pressure washers, lawn care, and personal mobility — including the #1 selling e-bicycle in the US — TruVolt operates across major retail and e-commerce channels including Amazon, Home Depot, Walmart, Sam’s Club, Costco, and more. Our team is passionate, collaborative, intellectually curious, and driven to continuously learn, experiment, and deliver results. We empower people to do their best work in a healthy, family-like culture with competitive pay, great benefits, and real opportunities for growth. We are seeking a Product Visualization Designer to own the visual execution of products across CMF, rendering, animation, and retail presentation. This role ensures all product visuals are compelling, accurate, and aligned with brand standards. Please note that this position is fully onsite and located within our headquarter offices in Jersey City, New Jersey. Key Responsibilities • Define and apply CMF (color, materials, finishes) across product lines, • Direct color placement across product components for consistency, • Review and enhance external 3D renders to meet quality standards, • Create high-quality product renderings for marketing and digital use, • Produce animations to showcase product features and design details, • Develop retail displays, pallet layouts, and merchandising visuals, • Optimize 3D models for accurate visualization and production alignment, • Ensure consistency across packaging, digital, and brand outputs, • Continuously improve rendering quality using AI-enhanced workflowsQualifications, • 3+ years of experience in industrial design, product visualization, or 3D rendering, • Strong expertise in color, materials, and finishes (CMF), • Ability to own visual execution across product linesTools & Skills, • KeyShot (rendering & animation), • Rhino (orthographic drawings), • 3D modeling tools, • Adobe Creative Suite, • Experience with retail display visualization, • AI tools for rendering enhancement Powered by JazzHR UvD2iJiB3e

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at www.coreweave.com. What You'll Do: Reporting to the Director of Website Strategy, the Senior Website UI/UX Designer will be responsible for designing intuitive, scalable, and high-performing digital experiences across our web ecosystem. This role will partner closely with developers, marketers, brand teams, and cross-functional stakeholders to create user-centered website experiences, evolve our design systems, support website redesign and migration initiatives, and transform complex business and technical requirements into elegant, conversion-focused interfaces. The ideal candidate combines strong visual and interaction design expertise with systems thinking, speed, and the ability to independently deliver polished, production-ready designs while leveraging AI-powered tools and workflows to improve creative efficiency, scalability, and quality. About the Role: We're looking for a highly experienced Senior Website UI/UX Designer to join our growing web and digital experience team. This is an individual contributor role focused on designing scalable, user-friendly, and visually compelling web experiences while helping modernize and streamline our broader digital ecosystem. The ideal candidate combines strong UI/UX design expertise with strategic thinking, speed, and attention to detail. You should be comfortable working in fast-paced environments, collaborating across multiple teams, and independently driving projects from concept through execution. This role is ideal for someone who enjoys solving complex user experience challenges, building scalable design systems, and using AI-assisted workflows to improve creative execution and operational efficiency. Who You Are: • 10+ years of experience in UI/UX digital web design, • Deep expertise in website UI/UX design, interaction design, responsive layouts, and modern digital experiences, • Proven experience supporting large-scale website redesigns, migrations, and digital modernization initiatives, • Strong experience creating scalable design systems, reusable UI patterns, and component libraries, • Expert-level proficiency in Figma and modern collaborative design workflows, • Strong understanding of user-centered design principles, accessibility standards, responsive design, and conversion-focused UX best practices, • Experience designing for complex web ecosystems with multiple user journeys, audiences, and content types, • Strong experience building high-fidelity prototypes and incorporating thoughtful animations and transitions into modern digital experiences, • Ability to translate business, marketing, and technical requirements into intuitive, elegant, and scalable user experiences, • Passionate about leveraging AI-powered tools and workflows to improve design speed, quality, research, ideation, and scalability, • Strong understanding of developer handoff workflows and cross-functional collaboration with engineering teams, • Able to work quickly and independently while maintaining a high standard for quality and consistency, • Strong communication, presentation, and stakeholder management skills, • Highly organized, detail-oriented, and comfortable managing multiple priorities simultaneouslyPreferred, • Expert-level experience with Figma, including advanced prototyping, interactive user flows, motion design, animations, and developer handoff workflows, • Experience building and evolving scalable design systems, reusable UI patterns, and component-based digital ecosystems, • Strong visual design sensibilities with a deep understanding of typography, layout, hierarchy, interaction design, accessibility, and modern web aesthetics, • Experience designing intuitive, conversion-focused user experiences across complex website ecosystems and user journeys, • Experience creating high-fidelity mockups, clickable prototypes, and polished interaction models that effectively communicate design intent, • Strong understanding of responsive web design principles and best practices across desktop, tablet, and mobile experiences, • Experience collaborating closely with front-end developers to ensure high-quality implementation and scalable digital experiences, • Experience working in high-growth B2B SaaS, AI, cloud, or infrastructure environments, • Familiarity with headless CMS architectures and composable web platforms, • Experience using analytics, heatmaps, experimentation, or user behavior tools to inform UX decisions, • Understanding of modern SEO/AEO and conversion optimization best practices, • Experience contributing to scalable design documentation, governance, and workflow standards Wondering if you're a good fit? We believe in investing in our people and value candidates who bring unique backgrounds—even if you don't check every box. Here are a few qualities we've found make someone successful on our team. If some of this describes you, we'd love to talk. • You care deeply about usability, accessibility, performance, and user experience — not just visual aesthetics, • You enjoy turning complex requirements into intuitive, elegant, and scalable digital experiences, • You think in systems and reusable patterns rather than one-off page designs, • You're comfortable moving quickly and adapting in fast-changing environments, • You're proactive, resourceful, and able to operate with a high degree of autonomy, • You're curious about how AI, cloud infrastructure, and modern web platforms are shaping the future of digital experiences, • You value collaboration, empathy, and kindness, and understand that great teams build better products together, • You lead with curiosity, humility, and respect when working across teams and disciplines Why CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences, • Achieve More Together We support and encourage an entrepreneurial outlook and independent thinking. We foster an environment that encourages collaboration and enables the development of innovative solutions to complex problems. As we get set for takeoff, the growth opportunities within the organization are constantly expanding. You will be surrounded by some of the best talent in the industry, who will want to learn from you, too. Come join us! The base salary range for this role is $161,000 to $237,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs. The benefits below reflect our US-based offerings for full-time employees; for roles in other locations, benefits vary and are shared during the hiring process. These include: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment, • A work culture focused on innovative disruption California Applicants California Consumer Privacy Act Equal Opportunity & Accommodations CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: careers@coreweave.com. Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Job Title: Senior Engineer, Hardware Location: Hoboken, NJ Division: Technology Department: Engineering About Us Quantum Computing Inc. (QCi) (Nasdaq: QUBT) is an innovative, integrated photonics company that provides accessible and affordable quantum machines to the world today. QCi products are designed to operate at room temperature and low power at an affordable cost. The Company’s portfolio of core technology and products offer unique capabilities in the areas of high-performance computing, artificial intelligence, cyber security as well as remote sensing applications. Position Description: We are seeking an experienced and talented Senior Hardware Engineer to be part of our hardware development efforts. As a Senior Hardware Engineer, you will be responsible for designing, developing, and testing advanced hardware systems. This position offers a unique opportunity to apply your expertise and skills in a challenging and innovative technology environment. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities: • Support the development of several platforms based around classical and quantum photonics as a senior hardware engineer., • Work alongside other hardware engineers to design custom electronics using Altium Designer., • Evaluate critical component performance via board-level and system-level lab testing (ADCs, DACs, FPGAs, TDCs, etc.), • Work with firmware engineers, software engineers, and quantum scientists during various phases of lab testing., • Work with contract manufacturers during manufacturing phases to procure custom electronics, addressing and mitigating any necessary design changes along the way., • Validate the performance of custom electronics with lab testing. Document any issues uncovered during testing., • Maintain documentation expected at milestone events during the entire design cycle (theory of operations, manufacturing documentation, validation testing results, etc.), • Integrate hardware into the complete system by working closely with mechanical, firmware, and FPGA engineers. Required Skills and Experience: • Bachelor of Science (BS) in Electrical Engineering or Computer Engineering (EE or CE) from an accredited university., • BS in EE or CE and 6+ years of experience or MS EE or CE with 4+ years of experience., • Proven experience designing PCBs from schematic capture, layout design, and review., • Experience with at least one ECAD suite (Altium, OrCAD, Allegro, CircuitMaker, or others) Altium is strongly preferred., • Familiarity with PCB design best practices related to Signal Integrity, Power Integrity, and EMI/EMC compliance., • Strong foundation in PCB design related to DFM, DFT, and DFA best practices., • Strong electrical engineering fundamentals in Analog, Power, and Digital Electronics., • Advanced experience with voltage regulators, LDO, and switch mode power supplies (SMPS)., • Experience with analog electronics design (op-amps, TIAs, filters, etc.), • Experience with digital electronics design (Logic Gates, Flip Flops, Microcontrollers, RAM, ROM, Flash, etc.), • Advanced knowledge of simulation tools such as SPICE., • Strong experience with low to medium-speed digital interfaces and protocols (I2C, CAN, UART, SPI, etc.)\, • Hands-on experience with board bring-up, debugging, testing, and integration with lab instruments such as: DMMs, Oscilloscopes, Logic Analyzers, and Spectrum Analyzers., • Able to code C, C++, MATLAB/Octave, or Python., • Working knowledge of Verilog is a huge plus., • Able to lift weights up to 50lbs (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Additional Preferred Skills: • Master of Science (MS) degree in Electrical Engineering or Computer Engineering (EE or ECE)., • Experience designing electronics with complex computing devices such as FPGAs, MCUs, CPUs, DSPs, etc., • Experience working with optoelectronics., • Experience with high-speed serial protocols (USB, PCIe, Ethernet, etc.), • Experience with RF analog, digital, and mixed-signal electronics., • Experience designing systems to meet compliance and certification requirements (e.g., CE/FCC)., • Experience integrating custom ASICs into designs., • FPGA/SoC/MCU lab validation with lab equipment., • Experience writing low-level firmware (C, Verilog, VHDL, etc.), • Experience with manual board prototyping/refurbing using essential equipment like soldering irons and hot air guns. Quantum Computing Inc. (QCi) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Incumbent(s) in this position may be required to perform other duties and special assignments not specifically stated above. Statements outlined in this section are designated as essential job functions in accordance with the Americans with Disabilities Act of 1990.

Job Description Electrical BIM Technician / Electrical CAD Designer Location: Lyndhurst, NJ Job Type: Full-Time or Part-Time Compensation: Competitive pay based on experience Join a Growing Construction Technology Company Elite CAD Designs is seeking an experienced Electrical BIM Technician / CAD Designer to join our growing team. We are looking for an individual with strong electrical construction knowledge who can transform design intent into accurate, constructible models and installation drawings. This position is ideal for someone with commercial electrical installation experience, electrical drafting experience, or both. Electricians looking to transition from the field into an office environment are encouraged to apply. At Elite CAD Designs, we specialize in Building Information Modeling (BIM), MEP coordination, prefabrication drawing production, Reality Capture, laser scanning, and Digital Twin solutions for commercial construction projects throughout the United States. Responsibilities • Produce detailed electrical shop drawings and installation drawings., • Develop and maintain electrical BIM models using Revit and AutoCAD., • Create coordinated 3D models for commercial construction projects., • Participate in BIM coordination and clash detection with mechanical, plumbing, fire protection, structural, and architectural trades., • Review engineering drawings and identify constructability issues before installation., • Assist with prefabrication and fabrication drawing production., • Coordinate with project managers, field personnel, contractors, and clients., • Maintain organized project documentation and ensure drawing accuracy throughout project execution. Qualifications • Commercial electrical installation experience and/or electrical drafting experience preferred., • Ability to read and interpret construction documents required., • Strong understanding of commercial electrical systems required., • Excellent communication and organizational skills., • Ability to work independently while contributing to a collaborative team environment., • Strong attention to detail and commitment to quality., • Additional experience in Mechanical, Plumbing, Fire Protection, or other MEP trades is highly desirable., • OSHA 10 or OSHA 30 certification is a plus but not required. Preferred Experience with one or more of the following: • AutoCAD, • Revit, • AutoCAD MEP, • Navisworks, • Revisto, • Autodesk Forma, • Bluebeam What We Offer • Competitive compensation based on experience., • Opportunities for career advancement., • Ongoing training in BIM, VDC, Reality Capture, and emerging construction technologies., • Exposure to large-scale commercial, healthcare, education, industrial, and infrastructure projects., • Collaborative and professional work environment., • Stable, long-term employment with a growing technology-driven company.

Job DescriptionTruVolt Brands (Snow Joe®, Sun Joe®, Aqua Joe®, Auto Joe®, and Jetson) is a fast-growing consumer products company on a mission to disrupt historically gas-driven market sectors with top-quality, reliable, and easy-to-use innovations that are affordable and eco-conscious. With a portfolio of over 500 products spanning electric and battery-powered outdoor power equipment, pressure washers, lawn care, and personal mobility — including the #1 selling e-bicycle in the US — TruVolt operates across major retail and e-commerce channels including Amazon, Home Depot, Walmart, Sam’s Club, Costco, and more. Our team is passionate, collaborative, intellectually curious, and driven to continuously learn, experiment, and deliver results. We empower people to do their best work in a healthy, family-like culture with competitive pay, great benefits, and real opportunities for growth. We are seeking a Lead Digital Designer to drive the visual quality of all digital outputs. This is a hands-on role responsible for designing high-impact campaigns while guiding team execution through clear direction and scalable systems. Please note this is a fully on-site position within our headquarter offices (Jersey City, New Jersey). Key Responsibilities • Design key campaign assets including ads, emails, landing pages, and web banners, • Define visual direction and layout systems for campaigns, • Ensure strong visual hierarchy, typography, and overall design quality, • Guide team execution through clear direction, references, and feedback, • Review and refine all digital outputs before release, • Maintain consistency across all digital touchpoints, • Build templates and systems to support scale production, • Collaborate with marketing on campaign planning and execution, • Leverage AI tools to improve workflow and creative output Qualifications, • 3+ years of experience in digital, e-commerce, or marketing design, • Strong portfolio demonstrating campaign work, • Ability to lead through design execution and direction Tools & Skills, • Adobe Creative Suite with strong proficiency in Adobe Photoshop, • Klaviyo (email design, layout, and campaign execution), • Figma, • AI tools (ChatGPT, Gemini, etc.), • After Effects + Premier Pro (plus), • Understanding of e-commerce and conversion-focused design Powered by JazzHR bLiEkHZSuW

Job Description About Bokara Rug Bokara Rug is one of the country’s leading importers of handmade decorative rugs, proudly serving clients for over 50 years. With over 150,000 rugs in stock and showrooms in Manhattan and New Jersey, we specialize in luxury, custom, and antique rugs for interior designers, architects, and private clients worldwide. Position Overview We are seeking a talented and creative Marketing & Graphic Designer to elevate our brand presence across digital and print platforms. This role will be responsible for creating compelling visual content, managing marketing materials, and supporting our sales and digital marketing efforts. Responsibilities • Design marketing materials including catalogs, brochures, advertisements, and presentations, • Create digital content for website, email campaigns, and social media, • Develop brand-consistent graphics for online and print use, • Assist with website updates, product listings, and visual merchandising, • Collaborate with the sales team on client presentations and custom projects, • Edit product photography and create visual assets, • Help maintain brand consistency across all channels Qualifications • 2+ years of graphic design and/or marketing experience, • Strong proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign), • Experience with digital marketing, social media, and email campaigns, • Strong typography, layout, and visual design skills, • Organized, detail-oriented, and able to manage multiple projects, • Photography experience is a plus, • Experience in luxury, interior design, or home furnishings is a plus What We Offer • Opportunity to work with a luxury, established brand, • Creative and collaborative environment, • Competitive salary based on experience, • Growth opportunities

Location: Hybrid in Summit, NJ / 1-2x per weekType: Ongoing contract opportunityCompensation Range: $60-$65/hr W2Our inhouse agency client is looking for a Packaging Designer with consumer skin healthcare experience. This role requires someone local to Summit to be onsite 1-2x a week. Responsibilities:Brand Design Responsibilities:Develop packaging design intents, shopper toolkits, and master assets; guide regional adaptation while preserving core brand equities.Ensure packaging meets regulatory, claims, and multilingual requirements with clear hierarchy and legibility.Embed sustainability‑by‑design principles in partnership with Global Packaging teams.Connect with Brand Building, Design Realization, internal teams, and external partners.Project & Workflow Responsibilities:Collaborate with the Brand Lead on project prioritization, resource planning, and design workflow improvements.Co‑develop clear, actionable design intent briefs and contribute to efficient design processes.Partner with the Design Project Manager to deliver projects on time and with excellence.Track and integrate creative and industry trends into packaging development or shopper assets e.g. POSM, toolkitsWork daily with Design Realization, adaptive designers, and print production to ensure output aligns with design intent.Lead color/print feasibility, support remote or on‑site press approvals, and codify learnings into standards.Collaborate with regional teams to address local regulations, languages, and supply constraints without compromising brand integrity. Qualifications:5+ years of FMCG/CPG packaging design experience (in‑house or agency).Strong portfolio demonstrating design‑to‑print excellence across substrates and processes, with understanding of end‑to‑end packaging development.Proven ability to translate brand strategy into production‑ready design intents.Expertise in color management, prepress, and proof/press checks.Proficiency in Adobe Illustrator, Photoshop, and InDesign.Experience improving design workflows, standards, and systems.Familiarity with sustainability principles and application to packaging. JOBID: JN -082026-142792#LI-CELLA#LI-MN1#PLEqual Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.At Cella, a randstad digital company, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact HRsupport@randstadusa.com.Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Cella by randstad digital offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility). This posting is open for thirty (30) days.PandoLogic. Keywords: Package Designer, Location: Summit, NJ - 07901

Job Description Job Title: Public Relations / Graphic Design Specialist Location: Jersey City, NJ (Onsite) Direct Hire | Full-Time | Hours: Monday–Friday, 9:00 AM–5:00 PM (Onsite) Pay: $65,000–$70,000 base salary + benefits Overview This is a hands-on, highly visible role for a PR-minded graphic designer who enjoys turning messaging into clean, premium, on-brand visuals that get noticed. The company operates within regenerative medicine, cellular therapy, and medical aesthetics, supporting healthcare providers and clinical teams focused on healing, recovery, and patient outcomes. You’ll help translate complex healthcare innovation into compelling visual storytelling across digital campaigns, social media, PR materials, presentations, and branded marketing content. This role is especially attractive to candidates with experience in: • Medical aesthetics, • Beauty/skincare branding, • Med-spa or dermatology marketing, • Healthcare or wellness campaigns, • Luxury-style creative branding, • Clinical or executive-facing design materials, • Candidates with an “aesthetic graphics” background — creating content for cosmetic, wellness, skincare, dermatology, or aesthetic-focused brands — are strongly encouraged to apply. Key Responsibilities • Design creative assets for digital campaigns, social media, presentations, brochures, advertisements, and marketing collateral, • Create branded content supporting PR initiatives and marketing campaigns, • Draft and edit press releases, blog posts, social media content, and brand communications, • Support brand storytelling through clean, sophisticated visual design and messaging, • Maintain consistent brand identity across print and digital platforms, • Assist with media kits, pitch decks, infographics, press materials, and event collateral, • Collaborate with marketing, sales, and leadership teams on campaigns and promotions, • Support social media content creation and campaign initiatives, • Assist with event preparation including signage, displays, and promotional materials, • Support photography, videography, and multimedia projects as needed Required Skills & Experience • 5+ years of experience in graphic design, marketing, PR, branding, or communications, • Strong portfolio showcasing branding, campaign work, digital content, and marketing materials, • Proficiency in Adobe Creative Suite, including:, • Photoshop, • Illustrator (preferred), • InDesign (preferred), • Canva experience strongly preferred, • Strong PowerPoint and Microsoft Office 365 skills, including executive-ready presentations, • Experience creating content for social media and digital marketing campaigns, • Excellent written and verbal communication skills, • Strong understanding of typography, layout, branding, and visual hierarchy, • Ability to manage multiple projects in a fast-paced environment, • Portfolio with examples of sophisticated medical aesthetics story telling. Preferred Background • Medical aesthetics, skincare, cosmetic, dermatology, or wellness branding experience, • Healthcare, medical device, biotech, or life sciences industry experience, • Experience creating premium, clinical-facing marketing assets, • Familiarity with PRP, regenerative medicine, anti-aging, or med-spa markets, • Photography, videography, or video editing experience is a plus Education (Preferred) Bachelor’s degree in: Graphic Design, Marketing, Communications, Public Relations, Or related field Position includes base salary, PTO and benefits. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M3- #LI- Ref: #558-Scientific

Job Description Company Overview Our client is a growing organization focused on delivering high-quality products and exceptional service through strong branding, creative excellence, and customer engagement. With a commitment to innovation, visual storytelling, and market presence, their team plays a key role in shaping brand identity and supporting business growth. Position Overview Our client is seeking a talented Graphic Designer to develop compelling visual assets that enhance brand recognition, support sales initiatives, and elevate marketing efforts across multiple platforms. This individual will be responsible for creating impactful designs for print, digital, product presentations, and promotional campaigns while maintaining brand consistency. Location: Irvington, NJ Employment Type: Full-Time Salary: $65,000 – $95,000 USD/Annually Key Responsibilities • Design and develop creative marketing materials including flyers, catalogs, brochures, presentations, social media graphics, digital ads, and promotional assets, • Create visually compelling sales collateral that supports product launches, customer engagement, and business development efforts, • Maintain and evolve brand identity across all internal and external marketing channels, • Collaborate with sales, marketing, and leadership teams to develop product mockups, customer presentations, and customized branding solutions, • Support website design updates, digital campaigns, and online brand consistency, • Prepare graphics and materials for trade shows, events, and promotional campaigns, • Develop product visuals and design concepts for uniforms, apparel, and customized branded materials, • Ensure creative deliverables meet quality standards, deadlines, & business goals, • Stay current with design trends, tools, and technologies to improve creative output Qualifications • Bachelor’s degree in Graphic Design, Fine Arts, or related field preferred, • 2+ years of professional graphic design experience, • Strong portfolio showcasing print, digital, branding, and marketing design work, • Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign required), • Experience with video editing, social media design, and web design is a plus, • Strong understanding of typography, color theory, layout, and visual hierarchy, • Excellent communication, organization, and project management skills, • Ability to work in a fast-paced environment and manage shifting priorities, • Experience in apparel, promotional products, manufacturing, or branded merchandise preferred, • Knowledge of embroidery, screen printing, or customization processes is a plus, • Adaptable, detail-oriented, and highly creative Compensation The published salary range is intended to provide competitive market-based compensation while allowing flexibility based on experience, skillset, education, and performance. EEO Statement Topaz HR is an Equal Opportunity Employer, and we do not discriminate on the basis of race, color, religion, gender, national origin, age, disability, or any other status protected by applicable law. We are committed to fostering an inclusive environment for all employees. Please Note: Topaz HR is conducting this search on behalf of one of our clients. The employer's name will be disclosed during the interview process, and all hiring decisions will be made directly by the client. Powered by JazzHR GGwNUuGuUT

Job Description Employment Type: Full-Time Location: On-site at our Newark HQ Hours: Monday–Thursday, 8AM – 5PM, Friday, 8AM – 1PM Fabuwood is seeking a dynamic, creative, and motivated Marketing Graphic Designer to join our Marketing Department at our HQ in Newark. This role offers the opportunity to create compelling brand experiences, develop high-quality visual content, and support marketing campaigns in a fast-paced, design-driven environment. Key Responsibilities • Design marketing materials that align with Fabuwood's brand identity and support dealer/showroom sales efforts, • Create digital assets for campaigns ensuring consistency across all platforms, • Assist in developing layouts for trade show materials, banners, signage, and promotional displays, • Collaborate with senior designers to execute creative concepts from initial brief through final production, • Ensure all designs adhere to brand guidelines, including approved colors, fonts, logos, and messaging, • Prepare print-ready files and coordinate with vendors/printers to ensure accurate color reproduction and production quality, • Assist with packaging design elements and product literature updates as new cabinet lines or finishes are introduced, • Stay current on design trends and tools to bring fresh ideas to marketing initiatives, • Take direction and incorporate feedback efficiently while managing multiple projects under deadline pressure Skills & Requirements: • Advanced proficiency in Adobe Photoshop, Lightroom, Canva, and other image editing tools, • Experience with video editing software (e.g., Adobe Premiere Pro), • Knowledge of InDesign, Illustrator, and other design platforms, • Strong understanding of typography, layout, color theory, and visual design principles, • Comfortable using AI-powered creative tools (e.g., Flow, Claude, Gemini, Midjourney, ChatGPT, Runway ML), • Proficiency in SketchUp and V-Ray for 3D modeling and scene creation, • Ability to produce hyper-realistic renderings for marketing, product presentations, and visual storytelling, • Strong understanding of major platforms: Instagram, TikTok, Pinterest, Facebook, LinkedIn, • Ability to create or adapt content for various social platforms, • Familiarity with current social media trends, reels, and short-form video content, • Highly organized, detail-oriented, and self-motivated, • Comfortable receiving feedback and collaborating in a team environment, • Strong verbal and written communication skills, • Ability to manage multiple projects in a fast-paced environment while meeting deadlines Experience Required • Background in interior design, architecture, furniture design, or a related field, • Familiarity with cabinetry, material finishes, color palettes, and spatial design, • Working with files such as floorplans, renderings and 3D models Qualifications • Bachelor's degree in Graphic Design, Interior Design, Architecture, Marketing and 5+ years in a related field (or equivalent experience), • Portfolio showcasing graphic design work and examples of 3D modeling and photorealistic renderings Benefits • Weekly Pay, • Company Matching 401(k) Program, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Paid Time Off (PTO), • Paid Holidays About Fabuwood Fabuwood is the leading kitchen cabinet manufacturer in the United States. We believe that your kitchen cabinets should help create a sanctuary that offers the perfect balance of functionality and ambiance. With a wide selection of styles, materials, and finishes, Fabuwood provides high-quality cabinetry that makes luxury kitchens affordable without compromising on comfort, quality, or efficiency.

Are you ready to help shape the future of private banking for advisors at the world's premier global financial institution? We're seeking an innovative and strategic Product Designer to drive the evolution of advisor-facing digital experiences within the Private Bank. In this role, you'll focus on e

Crate and Barrel Designers are passionate about helping customers envision possibilities with the latest home design trends. They build meaningful, long-term relationships by using their knowledge to guide customers in furnishing anything from an entire home to a single accent piece. Skilled across a range of design styles-from classic to contemporary-Designers utilize digital tools and technology during in-store and in-home consultations to bring customer visions to life. In this role, you will drive sales and customer engagement by promoting programs, leveraging leads, and maintaining an active presence on the salesfloor. You will conduct customer outreach, develop design packages to brand standards, and ensure timely follow-up. Maintaining operational excellence through impeccable product presentation and careful use of tools and technology is essential, as is collaborating with store and design teams to support business goals. This role offers a creative, rewarding career path for those passionate about home interiors and thriving in a team-oriented, competitive environment. A day in the life as a Designer... + Drive sales and a differentiated experience by providing enriching customer interactions, and providing elevated design offerings in the store, in-home and virtually with customers + Create elevated designs for customers using the preferred design tools to create moodboards, 2D & 3D floor plans, product lists and customer presentations + Lead design consultations in person (in-store or in-home) or via email, phone and virtual + Deliver projects in a timely manner and within determined timelines + Possess a clear understanding of the brand aesthetics and merchandising strategy by channel; Store, E-Commerce, Catalog + Ensure full understanding and awareness of all product information, including characteristics, care information and staying informed with the competition and industry trends + Deliver individual sales, KPI and service goals, productivity standards, and engage customers on the sales floor by demonstrating our selling skills + Actively listen to the customer to identify which products will best meet their needs and communicate company loyalty services. (e.g. designer rewards, Design Trade Program, credit card etc) + Support and model excellent service by exhibiting a positive attitude and enthusiasm ensuring all customers are provided gracious, quick, and efficient service + Support store training and educating on design services, to drive a clear understanding of design services and offerings + Develop new and lasting relationships with customers through networking and clienteling + Understanding of basic design functions including spatial planning, fabric selection, lighting, interior design styles + Excellent, effective, and timely communication skills and the ability to translate the brand vision and the customers wants/needs + Strong affinity for technology (2D and 3D tools, Google suite, video conferencing, iPad) and proficient in floor planning + Ability to stay up to date on current design trends + Ability to be an agent of change and shift quickly as our business evolves We'd love to hear from you if you have... + Understanding of basic design functions including spatial planning, fabric selection, lighting, interior design styles + Excellent, effective, and timely communication skills and the ability to translate the brand vision of CB2 and the customers wants/needs + Strong affinity for technology (2D and 3D tools, Google suite, video conferencing) and proficient in floor planning + Ability to stay up to date on current design trends + Proven track record of building long-lasting relationships with customers We'd love to hear from you if you have... + 1+ years of relevant experience in Furniture Sales/ Home Decor Design or retail/ customer service experience + Experience working one on one with clients and recommending solutions + Proficient in Google platforms, virtual communication, design tool experience preferred Euromarket Designs, Inc., which does business as Crate and Barrel and CB2, will be referred to as "the Company". The Company is deeply committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please contact the location you are applying to here and ask to speak with a manager regarding the nature of your request. The Company is an equal opportunity employer; applicants are considered for all positions without regard to race, color, religious creed, sex, national origin, citizenship status, age, physical or mental disability, sexual orientation, gender identity, marital, parental, veteran or military status, unfavorable military discharge, or any other status protected by applicable federal, state or local law. The Company participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the US. State / City Compliance: The Company will consider for employment qualified applicants with criminal history, including arrest and conviction records, in accordance with the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

Advocates for best practices across mediums—digital, social, experiential, print, motion, and integrated campaigns.

About Mercor’s talent network** Join our Graphic & UX/UI Designer Expert Network to connect with leading AI labs and companies seeking your expertise. By applying, you're joining our Graphic & UX/UI Designer talent network.