Electrical apprentice jobs in Chesapeake, VirginiaCreate job alerts

Job DescriptionDescription: LOCATION IS MARSHALL ISLANDS - KWAJALEIN AND ROI-NAMUR (Not Chesapeake, VA) - Tax Incentive Location ELECTRONICS TECH II Communications Marshall Islands Duties: The Electronics Technician II must meet the qualification requirements and have at least three (3) years’ experience: • Maintaining communications and navigation systems, • Repair, adjust and align CM300 radio, Interim Voice Switch Replacement (IVSR), National Airspace Voice Recorder (NVR) systems to pass certification and periodic flight checks., • Using specialized test equipment and software-controlled diagnostics to isolate malfunctions, • Repairing of mechanical and electrical assemblies and sub-assemblies, • Tuning, aligning, and adjusting equipment, • Inspecting equipment at specified intervals determining operational status, • Perform operational checks, • Maintaining inspection and maintenance records, • Operation of advance test equipment and test sets for the associated CNS equipment, • Provide mentorship and supervise Electronics Technicians lRequirements: Education: High School diploma or GED. Formal electronics training from: Technical School, or Class A/C military school in electronics for communications and navigation systems, or three (3) year electronics apprentice program with experience with the listed system types. Basic Qualifications: • US citizen (selected applicant will be subject to a government security background investigation and must meet eligibility requirements)., • This position requires a minimum of three (3) years of “hands on” work experience in support of installations, repair, troubleshooting or maintenance of electronic systems or equipment., • Must be a graduate of a high school or a trade school & possess valid US driver’s license with photo., • Minimum of three (3) years of “hands on” work experience in support of installations, repair, troubleshooting or maintenance of electronic systems or equipment that may involve training and assisting lower-level technicians. Must have the technical knowledge to solve unusually complex problems and be able to exercise independent judgment in performing tasks in support of electronic systems or Electronic Equipment., • Minimum of three (3) years’ experience performing preventive maintenance on ground radio communications systems and related equipment, inspecting equipment at specified intervals determining operational status, replacing defective components, performing operational checks, and maintaining inspection and maintenance records. Salary Range: $110K (+/-) Yearly Salary (tax free incentives) Benefits: Robust benefits package included

Job Description Hart Electric, LLC is seeking an Apprentice / Electrician Helper to help the citizens in the Norfolk, VA area keep their lights on and their homes safe. Do you want to LOVE your job? Are you an up-and-coming electrician who is customer-oriented, puts others first, and is looking for more than a job? Are you eager to learn how to diagnose and fix electric system issues? Are you tired of living paycheck to paycheck? Are you ready to kickstart an electrical technician career? If so, please read on! This Apprentice / Electrician Helper position earns an hourly wage of $14 - $18. Our benefits include paid tuition for electrical classes after 6 months of employment, company-paid uniforms after one month, performance bonuses, tool financing, paid vacation, and (6) paid major holidays after six months. If this sounds like the right opportunity for you, apply to join our electrician team today! ABOUT HART ELECTRIC A small family-owned residential and light commercial electric company established 20 years ago, we believe in doing the job properly and treating people fairly. Our company performs a variety of installations and repairs that always keep the day interesting. Our customers, both residential and commercial, are obtained 98% by word of mouth. Our customers know that when they call Hart Electric, we'll do what we say we'll do, guarantee our work, and respect their property. We strive to employ skilled technicians and friendly staff. This is why we offer competitive pay, solid benefits, and a great work environment! A DAY IN THE LIFE OF AN APPRENTICE / ELECTRICIAN HELPER In this entry-level position, you are happy to help and eager to learn all aspects of the electrical trade. Working side-by-side our experienced electricians, you learn all you need to know - including properly servicing equipment to how to talk with our clients. You enjoy being out in the field assisting our electrical team in order to exceed our client expectations! QUALIFICATIONS • 1 year of residential experience or be mechanically inclined., • Able to assist mechanics with installations., • Work with others., • Able to lift 50 LBs, • Valid driver's license and transportation., • Reliable and dependable to work daily., • Hand tools for electrical work or can purchase. ARE YOU READY TO JOIN OUR ELECTRICIAN TEAM? If you feel that you're right as our Apprentice / Electrician Helper, please complete our initial 3-minute, mobile-friendly application. We look forward to meeting you! Location: 23508 Must have the ability to pass a background check and drug test.

Job DescriptionSalary: LMR Technical Group (LMR) is seeking a Ship Checker. Location: Norfolk, VA Job Description: National Planning Activity (NPA), Execution Division, responsible for conducting ship checks onboard Navy Vessels of work notifications delivered to the NPA Department in support of Planners' work item development. A ship check consists of examining the affected equipment, system piping, and ship's structure to accurately estimate the amount of consumable materials that will be required. After the ship check, reports that contain ship check data including sketches, photographs, lead code/follow code memos, and reference drawings will be entered into the Navy Maintenance Database (NMD) by the Ship Checker. Job Duties: • Using applicable drawings and references, conduct ship checks onboard Navy vessels in direct support of the Planners to validate the work notification, determine the scope of repair, and provide the Planner with amplifying information to aid in work item development., • Identify interferences and any other special circumstances that will impact the planning process and work item development., • Document the ship checks with detailed information and photographs on the approved ship check forms in PDF format that can be used in the work item development and uploaded into NMD by the Planners., • Other related duties as assigned. Required Qualifications: • Individual shall possess a High school diploma or GED., • Candidate should have at least two (2) years of education in a technical/vocational school, apprentice training, U.S. Navy or equivalent., • Physical ability to climb ladders, transit decks, and perform work on Navy vessels., • Ability to lift, carry, and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs., • Self-starter with the ability to work well with others., • Knowledge of Navy ship compartmentation and lay-out., • Ability to read, understand, and validate a work notification and to determine the scope of work contained within the work notification., • Comprehensive writing and communication skills capable of both verbal and written findings and recommendations., • Some knowledge of Microsoft Office and Adobe programs including word processing., • Knowledge of Navy Structural, Mechanical, Piping, and Electrical systems., • 10% overseas travel expected. Must be able to obtain a Passport, CAC and/or DBIDs pass., • Must have a current and valid driver's license., • Must be a U.S. citizen. Preferred Qualifications: • Associate's degree or higher is preferred., • Preferred experience:, • Former military personnel with 5+ years' experience working on Navy vessels, or, • 10+ years' experience working a shipyard performing maintenance on naval vessel, or, • experience working for a Navy Maintenace Center with planning, estimating or project management. Security Clearance Requirements: • This position requires U.S. citizenship and will be subject to a security investigation and must meet the eligibility requirements to obtain and maintain a Secret Clearance issued by the US Government., • A current, active Secret security clearance is preferred., • In addition, to the security clearance, this position may require an additional background screening for base access., • Must have or be able to obtain a valid US Passport. Benefits Include: • Medical, Dental, and Vision Insurance, • Life, AD&D, and Short-Term Disability Insurance, • 401(k), • Paid Time Off, • Paid Holidays, • Employee Assistance Program, • Continuing Education Reimbursement Program About LMR: LMR is a service-disabled veteran-owned small business that supports technology development and provides comprehensive joint warfighter training by leveraging the skills, experience, and knowledge of its personnel. LMR Technical Group is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply. If you are a qualified applicant with a disability in need of an accommodation to complete the application process, please contact us at . EOE Disability/Veteran. EEOC Know Your Rights E-Verify Participation Poster Right to Work Poster Employee Polygraph Protection Act Poster FMLA Poster

Amee Bay, LLC a subsidiary of Three Saints Bay, LLC and a Federal Government Contractor industry leader, is seeking an Apprentice Electrician to join our Team in Chesapeake, VA. Qualified Candidates will be able to: \n • Work closely with Senior Electricians to develop or improve current knowledge of various shipboard electrical tasks.\n, • Learn how to read electrical drawing/diagrams.\n, • Develop key skills to execute clean and efficient wiring in cabinets.\n, • Learn to properly route cables throughout cableways.\n, • Use calibrated tools such as Multi-Meters and Meggers\n\n Other Duties and Responsibilities: \n • Transport materials, tools, and equipment to and within work sites as required.\n, • Inventory received material.\n, • Help maintain a clean worksite.\n, • Assist senior technicians with drilling, cutting, and modifying various shipboard items.\n, • Be able to frequently lift up to 50 pounds\n\n Position Requirements: \n • US Citizenship.\n, • Must meet requirements to obtain a Federal Secret Clearance.\n, • High School Diploma or equivalent.\n, • Minimum of one (1) year of marine/maritime related experience.\n, • Ability to perform general maintenance tasks.\n, • Ability to follow written and verbal instructions.\n, • Knowledge of relevant tools and equipment.\n, • Ability to work aboard ships which includes frequent climbing, bending, and working in confined spaces.\n, • Must have a Valid U.S. Driver's License.\n, • Must pass drug screening as a condition of employment.\n\n This position is located in Chesapeake, VA. To apply: • VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Lead Mechanic Supervisor- Electrician Purpose: Colonna's Shipyard is seeking a Lead Mechanic Supervisor to to support operations at our shipyard in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Essential Duties and Responsibilities: Key responsibilities include: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Ensure compliance of OSHA, USCG, ABS, U.S. Navy and company safety requirements concerning work assignments, • Prepare and install equipment or system alterations in accordance with the technical specifications., • Maintain and repair electrical and electro-mechanical systems of ferries, dredges, and all other marine vessels., • Read and interpret electrical schematics and blueprints, planning, laying-out and installing equipment and cabling., • Place conduit, pipes or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes., • Repair/Replace cables and connectors., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised). Experience as a Marine Electrician is required., • Must have the ability to understand job specifications, drawings, and corresponding technical references., • Responsible for the maintenance and repair of electrical and electro-mechanical systems of ferries, dredges, and other marine vessels., • Must have an advanced, hands-on experience adjusting/aligning or replacing components of motors, generators, and alternators such as bearings, centrifigural switches, brushes, diodes, etc., • Must have advanced knowledge of a variety of engine rooms and ship's electrical systems., • Minimal Travel; 10% or less.\n\n Security Requirements: • Must be able to access government facilities and obtain and maintain DBIDS., • Position requires US Citizenship.\n\n Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The SUBSAFE/DSS-SOC Quality Inspector is responsible for performing detailed inspections of materials, components, and work processes to ensure compliance with SUBSAFE and DSS-SOC requirements. This includes verifying that fabrication, assembly, testing, and installation activities meet all applicable specifications, drawings, and procedures. The inspector reviews and validates documentation such as QA Forms and technical work documents for accuracy and completeness, while also ensuring full traceability of Level I and other controlled materials throughout the process. This role supports certification efforts by confirming the proper implementation of quality controls and identifying and documenting non-conformances, assisting with corrective action processes as needed. The inspector must maintain a strong working knowledge of applicable technical manuals, NAVSEA drawings, and quality standards, and will regularly interface with production, engineering, and quality teams to ensure consistent execution and compliance. This Quality Inspector role supports Oceaneering's Marine Services Division (OII-MSD) and is based in Chesapeake, VA. Travel may be required up to 25% of the year. Duties And Responsibilities \n • Enforce an effective QA program that meets the requirements of the SUBSAFE Manual, DSS-SOC Manual, DLSS SOC requirements, OII-MSD QMS Manual, and other applicable higher-level guidance.\n, • Perform QA inspections and verifications as required by the company QA Manual, including responsibilities supporting SUBSAFE, DSS-SOC, DLSS, Level I, and other controlled work.\n, • Maintain current QA training and qualifications to support all aspects of production.\n, • Verify and witness all torquing evolutions recorded on QA-34 forms; ensure accuracy and sign to certify completion.\n, • Witness and document the installation of all new Level I material, certifying compliance with procedural and documentation requirements. \n, • Verify and witness all REC Certification testing; review and sign test records to confirm adherence to quality standards.\n, • Verify and witness controlled assemblies; ensure all assembly documentation is completed accurately to certify the work performed.\n, • Perform audits and surveillances as assigned, contributing to an effective internal surveillance program. \n, • Enforce the calibration program by ensuring only calibrated tools and equipment-with valid, intact seals-are used; remove expired or unverified equipment from service.\n, • Ensure all QA forms, test documents, TGIs, URO MRCs, and other forms of OQE are properly completed, signed, and maintained in accordance with all applicable standards and contract requirements.\n, • Participate in process improvement initiatives and recommend updates to QA procedures and the company Quality Program.\n REQUIRED: \n • Graduate of shipyard apprentice program or Associate's degree in a mechanical or electrical discipline from an accredited college or university.\n, • In lieu of the degree or apprenticeship, a minimum of three (3) years of practical experience with quality assurance/control. programs, machining skills, and a comprehensive understanding of submarine procedures, processes, and methods is required.\n, • Minimum of two (2) years of experience performing quality assurance and control inspections on U.S. Navy shipboard Hull.\n, • Mechanical, and Electrical (HM&E) systems, ensuring compliance with specifications and engineering drawings.\n, • Must be a U.S. citizen who is not a dual citizen of any other country.\n, • Experience with SUBSAFE, Level I, or Controlled Work programs.\n, • Proficient in reading engineering drawings, specifications, and QA procedures. \n, • Strong written and verbal communication skills.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night.\n, • Frequently working on or near moving equipment and vibrating equipment.\n, • When outdoors, humidity is frequently above 90%.\n, • Noise is over 85 decibels.\n, • Light is intense/glare.\n, • Occasional exposure to open fire/flames/sparks.\n, • Frequent exposure to airborne dust, fumes, and gases.\n, • Includes exposure to contaminants.\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures.\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable.\n, • Job tasks are performed in close physical proximity to other people.\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection for body, vision, and hearing protection.\n\n Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Lead Mechanic Supervisor-Services Electrician Purpose: Colonna's Shipyard is seeking a Services Electrician Supervisor to support day shift of the Temporary Services Department in our Shipyard in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Essential Duties and Responsibilities: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them.\n\n, • Install and connect temporary shore power to lighting, ships systems support equipment and alarm systems during overhaul/repair operations., • Install, test, maintain and remove temporary services to U.S. Navy vessels, tugs, barges, ferries, etc. during overhaul/ repair operations. Temporary services provided may include HVAC, air and water for various uses, effluent discharge, and steam., • Lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, and lubricating for industrial production and processing systems., • Select type and size of pipe, and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to specifications., • Disconnect and reconnect motors and electrical equipment., • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised)., • Must have at least six years of experience in the electrical field., • Must have a valid driver license., • Must have ability to understand job specifications, drawings, and corresponding technical references., • Must be able to enter and move through manholes to reach and work internally confined spaces., • Some previous supervisory/mentoring experience (such as make-up supervisor). \n\n Security Requirements: • Must be able to access government facilities and be DBIDS eligible., • Position requires you to obtain and maintain a DBIDS., • Position requires US Citizenship.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods., • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Lead Mechanic Supervisor-Services Electrician Purpose: Colonna's Shipyard is seeking a Services Electrician Supervisor to support day shift of the Temporary Services Department in our Shipyard in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Essential Duties and Responsibilities: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them.\n\n, • Install and connect temporary shore power to lighting, ships systems support equipment and alarm systems during overhaul/repair operations., • Install, test, maintain and remove temporary services to U.S. Navy vessels, tugs, barges, ferries, etc. during overhaul/ repair operations. Temporary services provided may include HVAC, air and water for various uses, effluent discharge, and steam., • Lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, and lubricating for industrial production and processing systems., • Select type and size of pipe, and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to specifications., • Disconnect and reconnect motors and electrical equipment., • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised)., • Must have at least six years of experience in the electrical field., • Must have a valid driver license., • Must have ability to understand job specifications, drawings, and corresponding technical references., • Must be able to enter and move through manholes to reach and work internally confined spaces., • Some previous supervisory/mentoring experience (such as make-up supervisor). \n\n Security Requirements: • Must be able to access government facilities and be DBIDS eligible., • Position requires you to obtain and maintain a DBIDS., • Position requires US Citizenship.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods., • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Lead Mechanic Supervisor-Services Electrician Purpose: Colonna's Shipyard is seeking a Services Electrician Supervisor to support day shift of the Temporary Services Department in our Shipyard in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Essential Duties and Responsibilities: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them.\n\n, • Install and connect temporary shore power to lighting, ships systems support equipment and alarm systems during overhaul/repair operations., • Install, test, maintain and remove temporary services to U.S. Navy vessels, tugs, barges, ferries, etc. during overhaul/ repair operations. Temporary services provided may include HVAC, air and water for various uses, effluent discharge, and steam., • Lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, and lubricating for industrial production and processing systems., • Select type and size of pipe, and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to specifications., • Disconnect and reconnect motors and electrical equipment., • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised)., • Must have at least six years of experience in the electrical field., • Must have a valid driver license., • Must have ability to understand job specifications, drawings, and corresponding technical references., • Must be able to enter and move through manholes to reach and work internally confined spaces., • Some previous supervisory/mentoring experience (such as make-up supervisor). \n\n Security Requirements: • Must be able to access government facilities and be DBIDS eligible., • Position requires you to obtain and maintain a DBIDS., • Position requires US Citizenship.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods., • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC and a Federal Government Contractor industry leader, is seeking an Apprentice Electrician to join our team in Chesapeake, VA. Work closely with senior electricians to develop or improve current knowledge of various shipboard electrical tasks.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Lead Massive $40M+ Commercial Builds in Hampton Roads – Local Experts Only!.This Jobot Job is hosted by: Cam Strahm.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $140,000 - $200,000 per year.Love running big commercial projects like award-winning s

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Commercial Construction // Huge Growth Opportunities // Apply now!.This Jobot Job is hosted by: Megan Bastian.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $140,000 - $200,000 per year.Thriving General Contractor seeks to add an experienced Project M

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Established and growing P&C Carrier.This Jobot Job is hosted by: Chuck Wirtz.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $150,000 - $200,000 per year.We are a customer and employee-focused P&C carrier providing coverage for drivers across the count

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

This Jobot Job is hosted by: Jerry Sipocz.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $90,000 - $100,000 per year.Our client is a leading innovator in the commercial lighting industry, dedicated to delivering exceptional lighting solutions that tra

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Lead Massive $40M+ Commercial Builds in Hampton Roads – Local Experts Only!.This Jobot Job is hosted by: Cam Strahm.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $180,000 - $225,000 per year.Love running big commercial projects like award-winning s

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Rick Hendrick Chevrolet (Norfolk).Location: 6252 Virginia Beach Blvd, Norfolk, Virginia 23502.The Lube Technician is responsible for performing express lube duties on vehicles.Supervisory Responsibilities: .This job has no direct supervisory responsibilities.Essential Duties and Responsibilities.Ad

Associate's degree or Advanced Post Secondary diploma (or military equivalent) in Electrical & Electronic Engineering Technology, Mechanical Engineering Technology, Electromechanical Technology, Electronics Technology, Instrumentation Technology, Mechatronic Technology, or a comparable field. Altern

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Job Description Job Description Senior Project Manager - Commercial Construction Senior Commercial Construction Project Manager Position Overview We are seeking an experienced Senior Commercial Construction Project Manager to oversee and lead large-scale commercial construction projects from incep

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Job Description Job Description Senior Project Manager - Drywall Senior Project Manager - Drywall Construction Position Overview We are seeking an experienced Sr Project Manager specializing in drywall projects to lead and oversee construction activities.The ideal candidate will ensure project del

Job Description Job Description Some see the railway as transportation, while at Plasser American we see it as transformation.The story of how steel tracks turned the American promise into American progress and forged a trusted pathway to the possibilities of the future.It's a story that continues

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Completion of a recognized trade apprenticeship, technical certification, or journeyman-level training in sheet metal or related disciplines preferred.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Responsibilities: Assemble, test, and inspect electro-mechanical components and systems according to engineering drawings, specifications, and quality standards.Perform system and sub-assembly level electronic builds, including soldering, crimping, routing, and wiring per schematics and instructions

They repair and maintain electrical and electronic systems ranging from radar and communications to navigation and weapon systems. Maintain electrical power generation and distribution systems. Operate diagnostic equipment and read electrical diagrams.

Basic plumbing and electrical repair skills.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl