Electrical engineer jobs in Mount Vernon, New YorkCreate job alerts

Position Summary • Oversees day-to-day operations of 20+ commercial properties under senior management direction located in the Bronx., • Responsible for building maintenance, tenant relations, staff supervision, and overall property performance., • Ensures efficient operation of all building systems, including HVAC, electrical, plumbing, and mechanical systems., • Performs and/or oversees general maintenance work such as carpentry, painting, and repairs., • Manages tenant requests, concerns, and service issues in a timely and professional manner., • Coordinates contractors and vendors, including bidding, supervision, and quality control of completed work., • Monitors building conditions to ensure compliance with lease obligations and regulatory requirements., • Identifies maintenance needs and implements preventative maintenance programs., • Responds to building service interruptions and determines appropriate repair or replacement solutions., • Communicates regularly with management regarding property performance, issues, and updates., • Supervises building staff, including scheduling, training, and performance oversight., • 5–7+ years of experience in commercial property or facilities management., • Relevant technical certifications (e.g., operating engineer, fire/life safety)., • Strong knowledge of building systems and maintenance practices., • Effective communication and organizational skills., • Ability to perform in a high-demand, service-oriented environment., • The superintendent needs to be able to drive a van and MUST be fluent in Spanish

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description Overview Opportunity: Engineer Perform preventative and repair maintenance work to ensure the hotel is maintained according to established quality and sustainability standards while treating guests in a warm and friendly manner. Your Growth Path Engineering Supervisor – Chief Engineer – Area Chief Engineer Your Focus • Conduct room inspections and identify repair needs., • Install or repair sheetrock and other wall coverings., • Paint designated areas and items., • Install and replace basic electrical fixtures, replace light switches, receptacles, light bulbs and fixtures., • Repair furniture., • Install, replace and program televisions., • Perform minor plumbing functions., • Replace and repair heating and cooling pumps as well as preventative maintenance on units., • Trace and repair all types of water lines., • Troubleshoot and repair kitchen equipment., • Maintain repair and preventive maintenance records., • Perform and maintain work to local, state and Federal codes., • Be aware of guest satisfaction scores and work toward increasing departmental and overall guest satisfaction., • Work as a bell attendant in the event of staffing shortages or during peak check in/out periods., • Follow Service Recovery Guidelines., • Practice safe work habits, wear protective safety equipment and comply with MSDS and OSHA standards., • Ensure overall guest satisfaction., • Perform other duties as requested by management. Your Background and Skills • High School diploma and Trade school course work in related field preferred., • Previous engineer/maintenance experience or equivalent training required. HHM Hotels Benefits and Perks • Competitive wages for full time and part time opportunities, • Medical, Dental and Vision Health Insurance, • Paid Time Off, • 401k Company Match, • Daily Pay, • Free Basic Life Insurance, • 24/7 access to TELUS Health, a confidential work-life resource., • Travel Discounts, • Commuter Transit and Commuter Parking Benefits, • Employee Assistance and Wellness Program, • Educational/Professional Development, • Referral Bonus Program Work Context • Work schedule varies and may include working on holidays and weekends and alternate shifts., • Requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, kneeling, stooping, crawling and climbing. What We Believe People Are Our Capability – Hearts That Serve – Only Excellence – Stay Nimble – Own It

E xperience in FPGA/ASIC development using VHDL or Verilog · E xperience in FPGA/ASIC verification using SystemVerilog · Experience with integrating FPGA firmware on hardware · Experience with FPGA Vendor Specific FPGA Implementation tools (Vivado/Quartus/Libero) · Experience working in a Linux

Required Qualifications:Bachelor’s degree in Electrical Engineering, Electrical Engineering Technology, a related discipline or equivalent work experience. Registered Professional Engineer (PE). Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solu

Are you a Switchgear Sales Engineer or Switchgear PM, with strong experience in ABB/Siemens power distribution products? If so, please keep reading. Why join us? We have distinguished ourselves in the Electrical, Data, and Power Solutions markets by not only suppling high-quality lighting, wire, and

Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. We are seeking a talented Civil Engineer to join our dynamic team. Bachelor's Degree i

Electrical Engineer Job Duties: Evaluates electrical systems, products, components, and applications by designing and conducting research programs; applying knowledge of electricity and materials. Deve

Job Description Job Description Mechatronics and electrical engineers at aRoboticsCo build PCB's, integrate sensors, and program sophisticated controls for advanced, mobile automation systems. To be straightforward, we value curiosity and clever approaches to physical implementation: Common work t

Job Description HVAC Controls Engineer - White Plains, NY Our client is a Leading Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5-10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionMulti-discipline engineering firm in business for decades is looking for an Electrical Discipline Engineer for their White Plains office! Job Responsibilities: • Design electrical systems such as lighting, power distribution, stand-by power generation, communication, fire alarm and security systems, • Manage a group of Electrical Engineers in project design and development tasks such as drawings, calculations, cost estimates, and specifications, • Respond to client questions and comments, • Review contractor submittals and provide clarifications during construction, • Review electrical department design documents for completion, • Ensure department personnel adhere to accepted industry and company standards, • Assist in the development of company quality standards and procedures, • Work closely with management and electrical department leadership to develop and implement electrical short- and long-range manpower and production plans to meet project objectives, • Assist in business development initiatives to pursue new projects including participation in client presentations Requirements: • BS in Electrical Engineering from an accredited program, • 10+ years’ experience with a consulting engineering firm designing building power, communication systems, lighting, and security systems, • Extensive knowledge of the architectural and engineering industry, including the Federal, State, and local laws and regulations that pertain to the industry, • P.E. license, • LEED Accreditation, • Knowledge of AutoCAD, EasyPower, and Revit desired, • Supervisory experience, • Experience with HVAC and plumbing systems a plus Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description Please note; this role is based in Mount Vernon! Job Summary Miller Proctor Nickolas (MPN) is a premier leader in the industrial boiler market. We are seeking a high-caliber Technical Sales Engineer to drive our Aftermarket Parts and Service division. This is not a "catalog sales" role; it is a complex, solutions-based position requiring a BS in Engineering and the ability to design sophisticated service solutions that go beyond the client’s initial request. You will act as the technical bridge between our field technicians and our clients, turning on-site challenges into comprehensive service upgrades and repair contracts. If you are a self-starter who thrives on technical problem-solving, value-based selling, and managing high-stakes industrial accounts, you belong at MPN. Key Responsibilities • Technical Solution Design: Evaluate field service opportunities and design complex mechanical/electrical service solutions. You must be able to read mechanical drawings and wiring diagrams to quote accurate repairs and upgrades., • Rapid Response Quoting: Support our field technicians and boiler cleaning teams by providing rapid, manufacturer-authorized quotes while they are on-site., • Value-Based Selling: Navigate long-term sales cycles by focusing on the "Total Cost of Ownership," ensuring clients understand the value of a premium MPN solution., • Account & Contract Management: Prospect new clients and manage existing accounts, including the negotiation of complex service contracts and maintenance agreements., • Full-Cycle Ownership: From receiving the lead to placing the PO with suppliers and coordinating with the Service Scheduling team, you own the project’s administrative and financial integrity., • Project Handoff: Identify and forward new boiler sales opportunities to the capital equipment team while coordinating larger projects with internal Project Management. Qualifications • Education: BS Degree in Engineering or Engineering Technology is required., • Experience: Minimum of 2 years in industrial technical sales. Prior experience with boiler systems or aftermarket industrial products is highly preferred., • Technical Literacy: Proven ability to interpret mechanical drawings, electrical wiring, and technical specifications., • Systems Proficiency: Strong experience with CRM platforms (HubSpot preferred) and MS Office (Excel/Word)., • Financial Acumen: Experience in industrial estimating, billing, and protecting profit margins, • Soft Skills: Customer-centric problem solver, excellent time-management, and the ability to work independently with no handholding. Why Join Miller Proctor Nickolas? • Reputation: Represent a manufacture’s authorized leader in the boiler industry., • Autonomy: Manage your own territory and accounts with the backing of a world-class field service team., • Compensation: Competitive base salary plus a commission structure designed for high-achievers., • Stability: Work in a critical industrial sector with a company known for excellence since 1957.Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job DescriptionJob Title: Medical Equipment Engineer IIIPosition Summary The Medical Equipment Engineer III serves as a senior technical expert responsible for providing advanced-level installation, troubleshooting, maintenance, and repair of medical and dental equipment both remotely and on-site. This role requires expert technical knowledge, exceptional customer service skills, and the ability to lead and mentor junior engineering staff. The Engineer III acts as a technical escalation point, ensures service excellence, and supervises Medical Equipment Engineer I and II team members while contributing to continuous improvement initiatives and internal training. Key Responsibilities • Provide expert-level technical support for complex dental equipment issues, both remotely and on-site, • Serve as the primary escalation point for unresolved or advanced technical cases from Engineer I and II staff, • Install, configure, inspect, test, and validate advanced dental equipment at customer sites, • Diagnose complex system failures and recommend corrective actions and long-term solutions, • Lead on-site service activities for critical installations, upgrades, retrofits, and major repairs, • Supervise, mentor, and provide technical guidance to Medical Equipment Engineer I & II team members, • Support onboarding and training of new engineers, including field shadowing and skills development, • Review service documentation for accuracy, completeness, and compliance with company standards, • Communicate clearly and professionally with customers, vendors, and internal stakeholders to resolve issues and manage expectations, • Monitor and analyze service metrics such as resolution time, repeat service calls, and customer satisfaction, • Collaborate with engineering, quality, and product teams to provide feedback on equipment performance and design improvements, • Support internal process improvement initiatives and contribute to best-practice development, • Travel regularly to client sites (average 2–7 days per assignment) and provide leadership during multi-day or complex service engagements, • Ensure safe handling, transport, setup, and operation of equipment (up to 50 lbs), • Perform other duties as assigned by managementSupervisory Responsibilities, • Directly supervises Medical Equipment Engineer I and II positions, • Provides performance feedback, coaching, and technical development support, • Assists management with workload planning, scheduling, and skills assessmentsRequired Qualifications, • Associate degree required; Bachelor’s degree in Biomedical Engineering, Electronics, or a related technical field preferred, • 5+ years of hands-on experience servicing medical or dental equipment, with demonstrated advanced troubleshooting expertise, • Prior experience mentoring, leading, or supervising technical staff, • Strong mechanical, electrical, and diagnostic skills across a broad range of clinical equipment, • Proven ability to communicate complex technical information clearly to customers and internal teams, • Excellent customer service, interpersonal, and conflict-resolution skills, • Proficiency in Microsoft Office (Word, Excel, Outlook) and service documentation systems, • Valid driver’s license and ability to travel regularly, • Ability to work independently, prioritize tasks, and manage multiple complex service cases, • Must be able to kneel, bend, stand for extended periods, work in tight spaces, and lift up to 50 pounds

Job Description Seeking an Electrical Engineer with a focus in lighting. This individual should have experience in lighting audits, lighting design, and lighting commissioning. Applicant should have knowledge of lighting systems and their components, as well as LL88 and NYC Energy Code, and lighting energy calculations. 3+ years of experience and EIT certification preferred. Experience with Excel and CAD/REVIT required. Duties • Lighting Audits, • Lighting Design, • Electrical Design, • Electrical Construction Oversight Salary Range: $80,000-$120,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Electrical Engineering degree or equivalent experience, • Autocad/Revit Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Job Summary We are seeking an experienced Electrical Engineer to work on the owner's side for a top pharmaceutical company in Westchester, NY. The Electrical Engineer will be responsible for overseeing electrical design, construction, and delivery of construction projects on a multi-billion dollar expansion program. Job Duties and Responsibilities • Review and provide input on electrical design documents, specifications, and drawings prepared by consultants., • Review submittals, RFIs, change orders, and pay applications related to electrical work., • Monitor progress of electrical scope during construction to verify quality, adherence to design intent, and code compliance., • Coordinate with architects, engineers, contractors, and utility providers to resolve technical issues and ensure compliance with project requirements. Required Qualifications • Bachelor’s Degree in Electrical Engineering or related field, • 5 - 20 years of electrical design and/or construction experience (preferably within Pharma, Bio- Pharma, Life Science, Healthcare, or related industry), • New York State Professional Engineering License (PE) preferred, NOT-required, • Excellent communication skills, both written and verbal., • Excellent organizational skills., • Excellent judgment and decision-making skills., • Ability to manage numerous tasks/projects simultaneously., • Excellent customer service skills. Salary: $140,000-$190,000 Company Overview IslandSearch Group, Inc., D/B/A ISG Consultants, is an architecture, engineering, construction and environmental consulting and staff augmentation firm that was established in 2018. As a certified MBE and SBE firm, we have over 28 years of experience providing professional staff in support of programs and projects within the public and private sectors in the Tri-State area. Please apply directly to if you have an interest in exploring this opportunity. IslandSearch Group, Inc. D/B/A ISG Consultants is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against based on disability.

Job Description We are currently hiring a Senior Mechanical Engineer in our Building Engineering division at our Albany, Poughkeepsie, White Plains, or Brooklyn NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Mechanical Engineer will work with clients to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a mechanical leadership role for the office. Responsibilities • Supervise mechanical engineering staff to develop concepts, strategies, construction documents and engineering reports for new building renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including HVAC, plumbing, process piping systems and fire protection design., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing mechanical project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionAre you ready to be apart of changing the game for pharmacy automation with next generation solutions? Come join us! Who We Are: ARxIUM is a leader in the development of advanced pharmacy technology and solutions. Here you have the opportunity to work with the best experts in the pharmacy health systems sector paving the way with innovative automation hardware and software technologies. ARxIUM has been providing innovative solutions in the pharmacy automation space for over twenty years and currently serves customers in North America, Europe and Asia. We have offices in Winnipeg and the Chicago Area and work remotely in cities across North America and Europe. ARxIUM is proud to offer the successful candidate • Competitive salary, • Medical/RX/Dental/Vision benefits, • Healthcare and dependent care FSAs, • Company paid Life/ADD insurance, • Company paid STD plans, • Company paid EAP plan, • Opportunity to participate in the company 401k plan with employer match Please note that this position involves travel requirementsWho We're Looking For: • Diploma or degree in a technical field including, but not limited to: mechanical, electrical, computer, biomedical., • 3 - 5 years experience programming Allen-Bradley PLCs., • Conveyor and Automation experience., • Engineering and Electrical experience., • 7+ years of direct field service (or equivalent) experience troubleshooting and repairing computerized electro-mechanical systems., • 7+ years of experience working in a service capacity with direct customer interaction.What You'll Be doing:, • Perform software and hardware preventive and corrective maintenance., • Perform software and hardware emergency break fix service calls., • Refines and validates PLC Coding., • Works with the facility to schedule appropriate downtime for preventive and corrective maintenance., • Responsible for timely and accurate completion of all paperwork and reports. This includes ticket updates and closures, expenses, timesheets and other administrative requirements., • Responsible for following up on open issues, tickets and escalations., • Working Outside normal business hours may required to service products., • Performs other duties as required. Take a look at your potential career with ARxIUM and apply today. WE would love to meet you! Powered by JazzHR bwrOSlqGzr

Job DescriptionTitle: Repair/ Quality EngineerLocation: Englewood, NJ- 5 days in office Position Summary: Hanwha Vision America (HVA) is an affiliate of the Hanwha Group, a Fortune Global 500 company. HVA is an industry-leading provider of advanced network video surveillance products, including IP cameras, storage devices, and video management systems, founded on world-class technologies. We offer end-to-end security solutions and have achieved global success across a wide range of industry verticals, including retail, transportation, education, banking, healthcare, hospitality, and airports. Hanwha Vision America (HVA) is seeking a Repair/ Quality Engineer to support HTCC’s engineering and repair operations by performing intake screening, basic diagnostics, quality checks, and documentation. The role ensures that incoming units are properly evaluated, repair processes run efficiently, and completed products meet quality standards before shipment. This position combines repair-support responsibilities with quality assurance activities to improve workflow efficiency, accuracy, and overall service performance. Key Responsibilities: • Perform initial screening and basic functional checks on incoming units, • Identify obvious issues or simple conditions that can be resolved before repair, • Support repair workflow by preparing units, organizing information, and performing basic diagnostics, • Conduct quality checks on completed repair units to ensure they meet internal standards, • Document inspection results and update system records accurately, • Assist with failure analysis for repeated issues and provide feedback to engineering, • Inspect packaging quality and verify final shipment readiness, • Collaborate with repair staff, engineering, logistics, and warehouse teams as needed, • Maintain checklists, guidelines, and standard procedures for inspection work, • Support process improvements related to efficiency, quality, and documentation complianceQualifications:, • Preferred background: Electronics, Electrical Engineering, Computer Engineering, or related field, • Basic understanding of electronic components (e.g., resistors, capacitors, diodes), • Ability to use multimeters and basic diagnostic tools, • Strong attention to detail and problem-solving skills, • Ability to follow technical checklists and standardized procedures, • Proficiency with Microsoft Office and basic system data entry Physical Demands:

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Senior Underground Transmission Engineer to join our team at K&A Engineering in remote in New England. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Serve as the primary technical lead for underground transmission line projects (69kV–345kV+)., • Provide dedicated engineering support to priority clients in the Northeast region., • Lead design and analysis of UG transmission systems, including:, • Cable system design, • Thermal analysis, • Duct bank and manhole design, • Trenchless installations (HDD, jack & bore), • Civil/structural interfaces, • Oversee preparation of engineering deliverables: drawings, specifications, calculations, and studies., • Collaborate closely with our existing T Line team to integrate UG capabilities into our broader transmission portfolio., • Act as a technical advisor to clients, supporting planning, feasibility studies, and project development., • Mentor junior engineers and help shape future hiring needs as the UG practice grows., • Support proposal development, scope definition, and client presentations., • Bachelor’s degree in Electrical, Civil, or Mechanical Engineering (PE preferred)., • 10+ years of experience in underground transmission line engineering with utilities, EPC firms, or consulting organizations., • Proven experience delivering UG transmission projects from concept through construction., • Strong understanding of cable systems, thermal ratings, duct bank design, and installation methods., • Familiarity with relevant standards (IEEE, NESC, ASCE, utility specifications)., • Ability to work directly with clients, manage expectations, and provide high quality technical guidance., • Strong communication skills and a collaborative mindset. Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job DescriptionAre you ready to be apart of changing the game for pharmacy automation with next generation solutions? Come join us! Who We Are: ARxIUM is a leader in the development of advanced pharmacy technology and solutions. Here you have the opportunity to work with the best experts in the pharmacy health systems sector paving the way with innovative automation hardware and software technologies. ARxIUM has been providing innovative solutions in the pharmacy automation space for over twenty years and currently serves customers in North America, Europe and Asia. We have offices in Winnipeg and the Chicago Area and work remotely in cities across North America and Europe. ARxIUM is proud to offer the successful candidate • Competitive salary, • Medical/RX/Dental/Vision benefits, • Healthcare and dependent care FSAs, • Company paid Life/ADD insurance, • Company paid STD plans, • Company paid EAP plan, • Opportunity to participate in the company 401k plan with employer match Please note that this position involves travel requirementsWho We're Looking For: • Diploma or degree in a technical field including, but not limited to: mechanical, electrical, computer, biomedical., • 3 - 5 years experience programming Allen-Bradley PLCs., • Conveyor and Automation experience., • Engineering and Electrical experience., • 7+ years of direct field service (or equivalent) experience troubleshooting and repairing computerized electro-mechanical systems., • 7+ years of experience working in a service capacity with direct customer interaction.What You'll Be doing:, • Perform software and hardware preventive and corrective maintenance., • Perform software and hardware emergency break fix service calls., • Refines and validates PLC Coding., • Works with the facility to schedule appropriate downtime for preventive and corrective maintenance., • Responsible for timely and accurate completion of all paperwork and reports. This includes ticket updates and closures, expenses, timesheets and other administrative requirements., • Responsible for following up on open issues, tickets and escalations., • Working Outside normal business hours may required to service products., • Performs other duties as required. Take a look at your potential career with ARxIUM and apply today. WE would love to meet you! Powered by JazzHR IybKD0oFAV

Job Description We currently are looking for qualified candidates in our White Plains, NY office locations to work on Energy and Commissioning projects for our Building Engineering Division. LaBella’s Building Engineering Departments provides our employees a collaborative, professional working environment, allowing for personal growth and responsibility on a variety of significant projects that serve our target markets. The Energy & Commissioning engineer will work with other engineers and project managers as part of a project team to support the development of concepts, strategies, designs, drawings, specifications and reports for new Building and Renovation projects with an Energy and/or Commissioning focus. Responsibilities • Perform energy audits and feasibility studies to identify Energy Conservation Measures., • Complete utility data analysis and evaluation of energy usage., • Perform basic energy savings calculations, making educated assumptions when applicable and using / interpreting data gathered from the field to estimate savings., • Develop design concepts in technical documentation. May assist with mechanical design projects as required., • Able to interpret complex plans and specifications and apply available information to ensure that all project design requirements are satisfied., • Plan, perform and document the commissioning of various Mechanical and Electrical Systems to ensure the intended operation., • Conduct on-site investigation and inspection of multi-discipline projects., • Takes a lead role in resolving construction problems, procedures, and methods., • Minimum 5 years of relevant job experience., • Bachelor of Science in Mechanical Engineering (or equivalent), • Obtained or in pursuit of a NYS PE License., • Energy and/or Commissioning certifications from industry organizations is a plus (CEM, CBCP, BCxP, BEAP, etc.), • Functional working knowledge of M/E/P/FP, building automation systems as well as system design and construction processes., • Proficient with building modeling software programs. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Job Summary We are seeking an experienced Mechanical Engineer to work on the owner's side for a top pharmaceutical company in Westchester, NY. The Mechanical Engineer will be responsible for overseeing electrical design, construction, and delivery of construction projects on a multi-billion dollar expansion program. Job Duties and Responsibilities • Assists the Project Management team in developing the budget and schedule for design and construction projects, including renovations and green field projects., • Works closely with Project Management, Engineering, Space Planning, EHS, Operations, and User teams to fully and rigorously document the MEP/FP and related requirements in the Owner’s Project Requirements document., • Performs preliminary due diligence explorations of existing MEP/FP systems during project initiation to identify any potential risks to the project and any opportunities for improving the building systems of existing buildings., • Assists the Project Manager and Procurement in the development of scopes of work for design professionals, construction managers, general contractors and commissioning agent RFPs. Assist in the evaluation and bid leveling of proposals., • Participates in regular project meetings., • Works directly with hired MEP engineers, consultants, and contractors to answer questions, resolve issues and develop solutions., • Provides supervision for all stages of the development and documentation of mechanical requirements for lab and other equipment for the project. Collaborates with the Project Management team, inhouse engineers, end users, the Asset Management team, EHS, design professionals, lab equipment vendors, design professionals and contractors to ensure that all mechanical system requirements for the equipment are met., • Provides detailed reviews of and comments on due diligence reports, test fits, Basis of Design documents, room data sheets, construction documents and specifications prepared by the design professionals, checking for thoroughness, accuracy and compliance with the project requirements and inhouse design and documentation standards and minimize errors and omissions., • Identifies long lead time equipment for potential Early Works purchasing by the contractor, • Works with the Project Managers, Design Professionals and Contractors to find solutions to mitigate costs and schedule delays due to errors and omissions in the design documents and unforeseeable field conditions, • Reviews shop drawings and submittals, RFI responses, and Change Orders, • Makes frequent site visits to ensure that mechanical requirements are being implemented correctly during construction and creates field reports., • Reviews Design Professional punch lists, • Manages commissioning, auditing, & validating facilities systems for Capital Projects., • Assists the Asset Management and Operations team in preparing equipment lists for import to the inhouse Integrated Workplace Management System, • Coaches and Mentors other members of engineering staff and supervises day to day operation of MEP systems., • Interacts with municipalities to obtain building permits and inspections., • Bachelor’s Degree in Mechanical Engineering or related field, • 5 - 20 years of MEP & HVAC experience (preferably within Pharma, Bio- Pharma, Life Science, Healthcare, or related industry), • New York State Professional Engineering License (PE) preferred, NOT-required, • Excellent communication skills, both written and verbal., • Excellent organizational skills., • Excellent judgment and decision-making skills., • Ability to manage numerous tasks/projects simultaneously. Company Overview IslandSearch Group, Inc., D/B/A ISG Consultants, is an architecture, engineering, construction and environmental consulting and staff augmentation firm that was established in 2018. As a certified MBE and SBE firm, we have over 28 years of experience providing professional staff in support of programs and projects within the public and private sectors in the Tri-State area. Please apply directly to if you have an interest in exploring this opportunity. IslandSearch Group, Inc. D/B/A ISG Consultants is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against based on disability.

Job Description Fire Protection and Plumbing Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Candidate will work with customers to gather design requirements for plumbing and fire protection design projects supporting various mission critical / data center centric projects. Will translate requirements to internal design team, while providing updates to customer. Responsibilities: • Design Plumbing and Fire protection systems in mission critical facilities - trade floors, labs, control rooms, data centers, etc., • Fire and plumbing engineering and design of systems cold and hot water systems, non-potable water systems, water treatment, sanitary drainage and vent systems, storm drainage systems, all types of pumping systems, natural gas distribution systems, special plumbing systems; fire suppression systems; sprinkler piping design, including hydraulic calculations; Incipient fire detection systems, • Work on multiple projects simultaneously, • Coordinate with other internal engineering disciplines to achieve successful, functional and innovative designs for our clients, • Interact with other building disciplines (architectural, structural, electrical, mechanical, civil, controls, etc.) to ensure compatibility with the design intent, • Select equipment for use in building systems and write reports, • Provide specifications for all fire protection and plumbing materials and equipment, • Go to client site as needed for project meetings/site observations, • Perform field surveys at customer sites to document existing conditions and/or observation of construction activities, • Participate in client project requirement meetings and value analysis and basic cost estimating, • Conduct QA /QC / quality assurance and quality control on project, • Perform and oversee the performance of load calculations and system design using company standard software, and proprietary manufacturer software, • Develop Plumbing and Fire Protection Drawings, • Design and document Plumbing and Fire Protection systems, • Assist in the continued development and updating of standards and specifications for the plumbing and fire protection, • Familiarity with renovation and new work projects; appropriate codes, standards and industry best practices, • Prepare Contract Documents using Revit and AutoCAD, • Bachelor's degree in Mechanical / Fire Protection / Plumbing engineering degree required, • Previous experience at an engineering consulting MEP firm a big plus, • PE; Professional Engineer a big plus, • Mission Critical Facilities Experience a huge plus!, • 5+ years' experience or more of plumbing design and fire protection systems, • Strong technical knowledge in fire protection and plumbing, • Excellent organization and planning skills, • A sound knowledge of engineering fundamentals, • Highly motivated, proactive and willing to take on new challenges, • Strong computer skills and skilled in software typically used in plumbing / fire protection design (i.e. hydraulic calculations, etc.), • Strong working knowledge of building, plumbing and fire codes, • Strong communication skills! Excellent written and verbal!, • Revit Experience is a must, • Ability to interface with clients After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionSenior Electrical Engineer - Critical Facilities - White Plains, NY (hybrid /remote) Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job Title: Associate, Electrical Engineer (Rochester, NY) Job Code: 25528 Job Description: - Determine design approaches and parameters - Perform system analysis to determine feasibility of design within time and cost constraints - Utilize modeling tools and equipment to establish operati

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

Job Title: Senior Specialist, Electrical Engineer Job Code: 34250 Job Location: Rochester, NY Job Schedule: 9/80 Job Description: This position will be responsible for providing Electrical Engineering systems support and development to customer-funded programs within our Exquisite Imaging

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in Electrical or Computer Engineering and a minimum of 4 years of relevant experience; or Masters degree from an accredited college or university in Electrical or Computer Engineering and a minimum

Preferred Additional Skills: - Electrical engineering degree. Job Title: Senior Specialist, Electrical Engineer-RF Job Code: 32847 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: The successful candidate will join a team of dedicate

Navy's nuclear-powered submarine fleet! As a national asset, NNL provides employees with excellent pay and benefits as well as excellent work-life balance and employment stability! #ElectricalEngineer Required Combination of Knowledge and Skill Bachelors degree from an accredited college or universi

The Laboratory assignment is intended to give the candidate experience in NNL's fleet support engineering community; this includes providing reactor plant engineering support (problem resolution and improvement initiatives) for aircraft carrier and submarine platforms throughout the life cycle of th

Consult with electrical engineers and other engineering staff to evaluate measurement techniques and corresponding measurement data as they relate to operational performance requirements of new products. Specialist, Electrical Engineer. In addition, the position will include collaboration with other

The successful candidate will be responsible for: • Working with a team to maintain OpenShift clusters on premises and in the cloud • Designing and extending CI/CD pipelines that embody DevSecOps best practices, from automated testing to continuous compliance • Lead modernization of legacy ser

Computer Engineering, Electrical & Computer Engineering,. Perform simulations and present design reviews to peer engineers. Materials Engineering, Materials Science.

Perform circuit and system design by manufacturing prototypes and integrating system hardware and software and performing qualification testing Procure equipment to support verification and validation of design and analysis efforts Team with other engineers to ensure integration of activities and pl

Electrical Engineer – Data Center Projects | Midtown Manhattan (Hybrid). Join a leading engineering firm in. Support electrical design for large-scale.

Senior Specialist, Electrical Engineer-RF. Working with design engineering to make necessary circuit changes prior to and during the launch of new products. Ability to design and conduct engineering experiments and act upon test results.

If you're an electrical engineer who's tired of "flexible schedules" turning into 50/60-hour weeks, this role is built differently. Electrical Engineer (MEP Consulting) – New York City. Design electrical systems for commercial, residential, and infrastructure projects.

Specialist, Electrical Engineer. The electrical engineering team is responsible for architecting, designing, developing, modifying, evaluating and integrating electronic equipment, electronic parts, components, or integrated circuitry for complex, high performance hardware systems. Provide technical

Bachelor’s degree in Electrical Engineering or a related engineering discipline. Professional Engineer license preferred (New Jersey and/or New York), or Engineer-in-Training / Fundamentals of Engineering certification. Perform electrical engineering calculations including load analysis, conductor

Job Title: Senior Specialist, Electrical Engineer. This position will be responsible for providing Electrical Engineering systems support and development to customer-funded programs within our Exquisite Imaging Solutions business unit of L3Harris Corporation. In lieu of degree, 10 years in electri

Bachelor's degree in Electrical Engineering or equivalent field. Our RMS business in Syracuse, NY is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. Join a global team of 35 000 engineers, software developers, and cyber experts who tu

A long‑established, mid‑sized engineering consultancy is looking for a mid‑level Electrical Engineer to join its New York City office. As a mid‑level Electrical Engineer, you will work under an experienced senior engineer while collaborating with teams across both offices. You’ll be part o

Job Title: Senior Specialist, Electrical Engineer (RF Design). As a member of the Product Support Engineering team you will be tasked with investigating a variety of problems including RF/Analog, assembly, SMT and test related. Working with design engineering and manufacturing teams to introduce new