Electrical engineer jobs in Plano, TexasCreate job alerts

Job DescriptionDescription: As a Part-Time Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand Team Member of the Month, Quarter, and Year recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work Career Growth through our in-house training program with a path personalized to your desired goals Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description We are looking for a Property Administrator to assist in directing and coordinating activities of on-site management. This person will assist in effectively implementing procedures, cost controls and policies, maintaining good tenant and client/owner relations, as well as assisting the Property Management team in maintaining invoice records and contacting vendors/setting up accounts. Responsibilities: • Answer management phones and assist with Tenant needs, • Respond to inquiries by providing routine information and or taking and delivering messages., • Receive and distribute and review all purchase orders, track purchase orders in Workspace, alert personnel of any problems or unresolved purchase orders, run monthly reports., • Coordinate special events such as holiday events/parties, welcome lunches, book fairs, blood drives, food drives etc., • Maintain inventory of office supplies and property staff directory., • Monitor outside vendors for compliance of contracts and certificate of insurance, • Assist with preparing and administering service agreements, • Establish and maintain record keeping and filing systems; classifies, sorts and files correspondence for tenant files and other documents, • Responsible for accounts payable, accounts receivable and reporting., • Organize and code invoices in Workspace, • Assist Chief Engineer with update of electrical analysis worksheet as utility invoices come in, • Responsible for issuing Purchase Orders, tracking, and assigning the purchase orders to invoices as they are processed for payment, • Applying tenant rents and open credits, • Compiling and reviewing Tenant Billings and other misc. charges, • Provide management team with aged delinquency reports and send late letters Desired Competency, Experience and Skills: • Must have a minimum high school education. Associates, B.A. or B.S. college degree preferred, • Minimum of 2 years previous commercial property management experience, • Experience with MRI, Workspace and Yardi software, • Previous experience in real estate accounting and familiarity with monthly accounting cycle, including an understanding of A/P, A/R, commercial leases., • Possess professional demeanor and excellent interpersonal skills., • Have access to reliable transportation and maintain a valid driver's license., • Computer literate and proficient on MS Word, Excel, PowerPoint,, • Excellent communication skills, both verbal and written, • Ability to work independently This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position. About Lincoln Property Company Lincoln Property Company ("Lincoln") is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, multifamily, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-use properties, throughout the United States, United Kingdom, and Europe. Lincoln's combined management and leasing portfolio on behalf of institutional clients includes more than 680 million square feet of commercial space. For more information, visit: . All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. By submitting your information or resume in response to this opportunity, you acknowledge that your personal information will be handled in accordance with Lincoln Property Company's privacy policy. Lincoln Property Company does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Lincoln Property Company to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Lincoln Property Company will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies.

Job Title: JOBSITE/FIELD SUPERINTENDENT Department: FIELD SERVICES Position Summary: To provide on-site coordination for all phases of construction projects, including coordinating sub-contractors, material and equipment, ensuring that specifications are being strictly followed, and work is proceeding on schedule and within budget. Field Superintendent is responsible for scheduling, inspections, quality control, jobsite safety and jobsite cleanliness. Job Scope: The Project Superintendent is solely responsible for and will be held accountable for the timely completion of the project and ensuring that the project is constructed in strict accordance with plans, specifications, and local codes. Field Superintendent schedules all subcontractors, consultants, and vendors, as well as ensures their completion of work within time allowed. The Field Superintendent is responsible for the coordination of work directed in the field, provide work is performed in accordance with plans and specifications. Conflicts or revisions to the plan shall be communicated with the project team (i.e. project manager, architect, engineer, consultant, and owner) for mutual resolution, prior to execution of work that deviates from the approved plans. The Field Superintendent establishes and enforces jobsite quality control programs to ensure quality completion of construction. The Field Superintendent does not have authorization to engage in monetary agreements (subcontracts, change orders, work authorizations). All request for monetary agreements must be communicated to the project team for consideration prior to work performed. Essential Functions: • Schedule subcontractors, consultants, and vendors in critical path to ensure timely completion., • Perform quality control duties and responsibilities regarding the work being performed., • Communicate with project team regarding ASI’s, RFI’s, and Material Submittals., • Ensure that subcontractor is fully executing and complying with his contracted scope of work., • Coordinate required inspections with local jurisdictions., • Identify subcontractor non-compliance with safety, health, and environmental quality standards., • Identify conflicts in construction progress and communicate them to project team for resolution., • Maintain daily log of activities on the jobsite utilizing Procore software., • Perform Superintendent duties at multiple jobsites, simultaneously – when necessary., • Ensure subcontractor has corrected all deficiencies identified by project team., • Walk project continually to monitor activities and assist in future planning., • Preside over weekly subcontractor meetings designed to coordinate the work., • Issue notices of non-compliance to subcontractors in regards to quality of work or scheduling., • Ensure that the jobsite is always kept in a clean and organized manner., • Perform project punch list identification and ensure completion. Secondary Functions: • Assist in budgeting, bidding, and award of subcontracts., • Assist in obtaining permits or approval of revisions., • Gather project material submittals and maintain records of approvals at the jobsite., • Identify areas of work that are outside of subcontracted scope., • Preside at pre-construction meeting with each subcontractor., • Opening the jobsite at beginning of the day and securing the jobsite at the end of the day., • Assist in hiring sub-tier employees. Supervisory Responsibility: The Field Superintendent supervises all subcontractors, consultants, and vendors on a daily basis. This supervision ensures adequate manpower is available for each task and compliant work performed. This position is responsible for monitoring project security personnel. Field Superintendent also supervises all Assistant Superintendents. Knowledge, Skills and Abilities: • Provide direction to and resolve problems amongst 30+ subcontractors and vendors., • Ability to identify deficient work and provide resolution., • Communicate using the following tools: telephone, email, laptop/notebook computer, and cloud-based software applications., • Ability to read complex construction drawings., • Monitoring jobsite general health and safety., • Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments., • Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Ability to speak effectively before groups of customers or employees of organization., • Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence., • Mathematical Skills - Calculates figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry., • Reasoning Ability - Solves practical problems and deals with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views;, • Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed., • Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Organizes or schedules other people and their tasks; Develops realistic action plans., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions;, • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly., • Adaptability - Adapts to changes in the work environment; Manages competing demands; Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions;, • Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan., • Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Education and/or Experience: Minimum of FIVE years of verifiable experience, thorough knowledge of trades and be computer literate. Experience with Procore and Microsoft Office (Excel, Word, Project and Outlook) is also preferred. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to travel to the jobsite(s) as assigned., • This position involves work at a construction site where duties will be performed both indoors and outdoors., • Overtime may be required to meet project deadlines., • Dexterity of hands and fingers to operate a computer keyboard, mouse and other business machines., • While performing the duties of this Job, the employee is regularly required to stand and walk;, • Reach with hands and arms;, • Climb or balance; stoop, kneel, crouch, or crawl;, • Talk or hear., • The employee is occasionally required to sit., • The employee must occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to toxic or caustic chemicals; risk of electrical shock and risk of vibration. The noise level in the work environment is usually loud. • This job description will be reviewed periodically as duties and responsibilities change with business necessity. Essential and marginal job functions are subject to modification.

Now Hiring: EMS Engineer – Level I Location: Richardson, TX Compensation: $75,000 – $95,000 annually (Level I) 💡 Please note: Depending on your level of experience (Level I, II, III, or Senior Lead), salary may vary significantly. This posting outlines Level I requirements only. Candidates at higher levels will be expected to meet additional responsibilities. 🚀 About the Role As an Energy Management System (EMS) Engineer – Level I, you’ll start your journey in the building automation and energy management industry from the perspective of a controls engineer. You’ll work closely with senior leaders, project managers, and experienced EMS Engineers to learn the fundamentals of designing, programming, and commissioning building automation systems. This is an exciting opportunity for someone looking to grow their career in energy efficiency, building automation, and smart systems while being part of a supportive and innovative team. 🔧 What You’ll Do • Develop controls installation submittals, wiring diagrams, and bills of material., • Program controllers and create project sequences of operation and graphics., • Support material planning, project submittals, and documentation processes., • Gain hands-on experience with system navigation, WebCTRL software, and Eikon programming., • Assist higher-level engineers and technicians with project start-up, commissioning, and troubleshooting., • Coordinate with electricians, HVAC technicians, and other trades to deliver successful projects., • Learn and apply LSI Engineering Standards and ARC 156 rules. 🎯 What We’re Looking For • Strong foundation in HVAC basics, electrical knowledge, and computer skills (Excel, Word, etc.)., • Ability to read and interpret schematics, equipment drawings, and floor plans., • Interest in learning programming, system graphics, and energy management principles., • Excellent communication skills with the ability to work both independently and in teams., • Professionalism, punctuality, and motivation to grow your skills. 📈 Career Growth & Compensation We recognize and reward growth. As you progress through levels, your responsibilities — and compensation — increase: • Level I: $75,000 – $95,000, • Level II: $90,000 – $105,000, • Level III: $100,000 – $135,000 🌍 Why Join Us? • Competitive pay with clear progression opportunities., • Hands-on training and mentorship from experienced leaders., • Be part of a collaborative and forward-thinking company., • Contribute to smarter, more sustainable buildings and systems. 👉 Ready to start your career in building automation with a team that values your growth? Apply today and take the first step toward becoming a senior EMS Engineer.

Education & Experience: Bachelor’s degree in electrical engineering required; Master's degree in electrical engineering or related field a plus; Active Professional Engineering (P. Position Requirements: Strong command of fundamental electrical engineering principles; Strong analytical skills and

Job DescriptionCompany Description Ascent, LLC is a leading provider of comprehensive solutions for the planning, design, engineering, development, and operation of data centers and other mission critical facilities. Headquartered in Saint Louis, MO, Ascent specializes in powerful, efficient, and technologically advanced mission critical facilities and offers clients a broad range of delivery models spanning shell & core, build-to-suit, turnkey, and outsourced critical systems operations. Founded in 1998, Ascent provides a full spectrum of fast-track services that include project programming, design management, facility assessment, development and construction management, commissioning, and ongoing maintenance operations. Today, Ascent focuses on providing clients with innovative solutions and services yielding the highest levels of operational autonomy, efficiency, and control. Ascent’s clients include some of the most demanding mission critical organizations spanning multiple industries, Fortune 500 firms, and service providers. Our business is growing fast and we are currently seeking a talented Senior Project Engineer / Project Manager. Job Description TITLE: Senior Engineer / Project Manager (Engineering & Construction) LOCATION: Plano, TX RESPONSIBILITIES: • Responsible for project management and technical engineering support for large enterprise data center expansion projects., • Prepare designs, specifications, and drawings for repair and replacement/upgrade of building electrical and/or mechanical systems and other related systems/components. Manage the RFP process., • Lead Project Team and sub-contractors to ensure that projects are completed within established goals for quality, timeliness, budget, profitability, safety and customer satisfaction., • Lead and organize project management activities – reviewing and updating the budget, preparing and updating a project schedule, and establishing project communications, standards and files., • Provide consulting/owner’s rep services by proactively evaluating existing building systems and providing recommendations and a plan of action to repair/upgrade/enhance systems., • Create positive client relationships and pursue new project opportunities that Ascent should engage in with existing customers. Continually develop a strong network with local contractors., • Pre-construction responsibilities:, • Manage the preparation of designs, specifications and drawings for repair and replacement/upgrade of building electrical and/or mechanical systems and other related systems/components., • Create and distribute RFP’s to include development of contractual terms and conditions relating to proposal/bid pricing. Evaluate responses, award contracts and oversee activity through satisfactory completion., • Consulting / Owner's Rep responsibilities:, • Manage and/or perform analysis, evaluations and investigations of existing buildings’ electrical and/or mechanical systems, with emphasis on power, lighting, life safety, communications and security., • Prepare and review reports for electrical and/or mechanical systems from a design, operation and maintenance perspective including identification of items requiring remedial action and estimated repair costs., • Provide engineering, supervision and project management support for existing data center operations., • Troubleshoot emergencies, potential problems and issues, and organize and supervise resolution., • Ongoing Operations Support, • Provide ongoing technical support, management and oversight of vendors as necessary., • Continually develop local contractor network associations. Qualifications • BS in Electrical Engineering, Mechanical Engineering or other related field, • 5 + years applicable work experience, • Candidate must be technically proficient in planning and scheduling, and exhibit excellent organizational skills., • Candidate must possess strong communication skills, the ability to lead coordination meetings and actively facilitate progress in order to achieve scheduled goals., • Candidate must have a disciplined approach to managing task assignments. People skills, good judgment, and flexibility are critical to this position., • Knowledge of construction planning, mechanical or electrical systems necessary, building controls, fire systems, security systems; experience in these areas a plus., • Candidate will be able to work cooperatively with internal administration groups, and to deal directly with customers and contractors to reach mutually acceptable terms and conditions., • Proficiency with MS Excel, MS Word, MS Project and Auto Cad is desired is required., • Travel as needed based on client / project needs Additional Information This position reports to the site Director, Engineering & Construction. All interested candidates should visit and select the Why Ascent / Careers tab to apply for the position. Ascent, LLC offers a full benefits package including medical, dental, vision, STD/LTD, life insurance, 401(k), PTO, paid holidays, casual work environment and more. Ascent, LLC is an Equal Opportunity Employer. We are committed to harboring an inclusive and diverse work environment and welcome all qualified applicants regardless of race, age, gender, sexual orientation, gender identity, religion, disability, national origin, protected military or veteran status, or any other status protected by the laws or regulations in the locations where we operate. These terms apply to all stages of employment with our company. Ascent, LLC actively works to create an inclusive environment where all of our employees can thrive, and we understand that having a wide range of experiences, viewpoints, and backgrounds help to make us both a stronger employer and a stronger business.

Job DescriptionPosition Overview We are seeking a Senior Electrical Engineer to lead the design and development of electrical systems for both new construction and renovation projects, with a focus on mission-critical facilities. This role involves managing multi-discipline projects, ensuring high-quality, code-compliant designs, and providing technical leadership to the electrical engineering team. The ideal candidate will bring expertise in system design, project coordination, and client collaboration to deliver projects on time, within budget, and to the highest standards. Key Responsibilities * Lead the electrical discipline on assigned projects, ensuring design accuracy, quality, and adherence to schedules and budgets. * Collaborate with clients to identify project goals, constraints, and success criteria. * Develop innovative and practical design solutions, weighing performance, cost, and implementation considerations. * Produce and review design documentation, including conceptual designs, equipment selection, construction drawings, specifications, and energy modeling. * Coordinate with other engineering disciplines to ensure a fully integrated and constructable design. * Oversee client expectations, providing clear and timely communication throughout the project lifecycle. * Serve as the Owner’s representative during construction phases, reviewing submittals, responding to RFIs, and conducting site inspections. * Mentor and guide junior engineers and designers to develop their technical expertise and leadership skills. Qualifications * Experience: 6+ years in the MEP industry, with significant experience in electrical system design. * Education: Bachelor of Science in Electrical Engineering (or higher). * Licensing: Professional Engineering License (or the ability to obtain in the near future). * Proven track record leading multi-discipline project teams. * Strong organizational, communication, and problem-solving skills. Preferred Skills * Proficiency with Revit and other electrical design software. * Experience with mission-critical facility projects. * Commitment to delivering innovative and community-focused engineering solutions.

Job DescriptionDescription: JOB TITLE: Radio Frequency (RF) Test Engineer DEPARTMENT: Test Engineering REPORTS TO: Test Manager PRIMARY FUNCTION OF POSITION: The RF Test Engineer is responsible for the design, execution, and improvement of test processes for RF and high-frequency electronic products. This includes hands-on testing, troubleshooting, and optimization of RF components such as antennas, filters, amplifiers, and transceivers. The ideal candidate will have a strong foundation in RF principles and experience using advanced RF test equipment to ensure product performance, reliability, and compliance. DESCRIPTION OF DUTIES: • Develop and execute test procedures for RF components and systems, including antennas, filters, amplifiers, and transceivers., • Measure and analyze RF performance parameters such as gain, return loss, insertion loss, VSWR, isolation, and signal-to-noise ratio., • Operate and maintain specialized RF test equipment including spectrum analyzers, network analyzers, signal generators, and power meters., • Debug EMI/EMC issues and optimize signal integrity in RF assemblies and systems., • Troubleshoot performance issues and collaborate directly with customer engineering teams to resolve technical concerns and ensure requirements are met., • Design and implement test fixtures, setups, and jigs that ensure signal integrity and accurate repeatable measurements., • Review customer specifications and contracts to extract and fulfill test requirements., • Work with automation platforms such as LabVIEW, Python, or similar to streamline RF test processes., • Supervise RF Test Technicians and train team members in proper handling and debug techniques., • Perform root cause analysis and provide detailed failure reports., • Maintain thorough documentation of test plans, procedures, results, and equipment calibration., • Ensure smooth product flow by identifying and eliminating test bottlenecks and false failures., • Support continuous improvement by analyzing test yields and implementing corrective actions. Requirements: EDUCATION/EXPERIENCE REQUIRED: • Bachelor’s degree in Electrical Engineering or a related field, with a focus on RF or microwave systems., • Must pass and maintain CIT certification for IPC-A-610 standard (or obtain within 90 days of hire)., • Minimum 3 years of experience in RF test engineering or a related RF-focused role. SKILLS/EXPERIENCE PREFERRED: • Deep understanding of RF principles and test methodologies., • Experience testing RF components such as antennas, filters, amplifiers, and transceivers., • Proficient in the use of advanced RF test equipment (e.g., Keysight, Rohde & Schwarz, Anritsu)., • Familiar with EMI/EMC testing, debug, and mitigation techniques., • Strong collaboration skills for working directly with customer engineering teams on test strategy, troubleshooting, and validation., • Familiarity with RF simulation tools (e.g., ADS, HFSS) is a plus., • Strong attention to detail, analytical thinking, and ability to document findings clearly. PHYSICAL REQUIREMENTS: • Candidate must be able to walk, sit, and/or stand for extended periods of time. Must be able to lift at least 25 pounds. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Libra Industries is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

Job DescriptionPosition Overview We are seeking a skilled Electrical Engineer to join our team and contribute to the design and development of building systems across a variety of projects. This role offers the opportunity to work on innovative solutions, collaborate with multidisciplinary teams, and ensure designs meet industry standards, building codes, and client expectations. Key Responsibilities * Assist in the design and development of electrical systems for building projects, ensuring compliance with applicable codes and standards. * Prepare and review drawings, specifications, and other design documents. * Coordinate with architects, mechanical engineers, and other disciplines to ensure integrated project delivery. * Conduct calculations, load analyses, and system layouts for electrical systems. * Support senior engineers in managing schedules, budgets, and client communications. * Participate in site visits and field inspections as needed to verify design implementation. Minimum Qualifications * Bachelor’s degree in Mechanical or Electrical Engineering. * Successful completion of the Fundamentals of Engineering (FE) Exam. * Certified as an Engineer-in-Training (EIT) by the State of Texas. * Strong communication, organizational, and time management skills. Preferred Qualifications * Licensed Professional Engineer (PE) in the State of Texas. * Previous experience in the design of standard mechanical or electrical systems for buildings. * Experience working in an MEP consulting environment. * Excellent knowledge of applicable building codes.

Job DescriptionPosition Overview We are seeking an experienced Plumbing Engineer to join our MEP design team. The ideal candidate will have 5–6 years of hands-on experience in plumbing design, system coordination, and construction administration. This role involves leading the design of plumbing systems for commercial, educational, healthcare, and institutional projects while ensuring compliance with codes, standards, and project requirements. Key Responsibilities * Design plumbing systems, including domestic water, sanitary waste, stormwater, natural gas, medical gases, and specialty piping systems. * Prepare detailed drawings, specifications, and calculations for plumbing projects. * Coordinate plumbing system designs with mechanical, electrical, structural, and architectural disciplines. * Review and interpret construction documents, shop drawings, and submittals. * Conduct site visits, field inspections, and provide construction administration support. * Ensure designs meet all applicable building codes, standards, and client requirements. * Mentor junior engineers and designers, providing technical guidance and quality oversight. * Communicate directly with clients, contractors, and project teams to achieve project goals. Qualifications * Bachelor’s degree in Mechanical Engineering or a related field. * 5–6+ years of plumbing system design experience within an MEP consulting or engineering firm. * Strong knowledge of plumbing codes and standards (IPC, UPC, NFPA, ASPE, etc.). * Proficiency in design software such as AutoCAD, Revit, and Microsoft Office Suite. * Excellent communication, coordination, and project management skills. * Ability to manage multiple projects simultaneously under tight deadlines. Preferred Qualifications * Licensed Professional Engineer (PE) or Engineer-in-Training (EIT) on track to licensure. * ASPE (American Society of Plumbing Engineers) membership or certification. * Prior experience in designing plumbing systems for large commercial, healthcare, or institutional facilities. * Familiarity with sustainable design practices, water conservation strategies, and LEED standards. Benefits * Competitive salary based on experience. * Comprehensive health, dental, and vision insurance. * 401(k) retirement plan with employer contribution. * Paid time off and company holidays. * Professional development support, including training and licensure assistance.

Job DescriptionPRIMARY FUNCTION Primary responsibilities include providing for the design and technical systems for large, complex projects from schematics through construction administration. TYPICAL DUTIES • Responsible for building system concepts and documentation process from schematics through construction administration phases within the discipline., • It is expected that the Electrical Engineer in regular coordination with Supervisor in project development and performance., • Electrical Engineer shall have a proficient knowledge of primary sectors of design including:, • Power Distribution, • Lighting and Controls, • Fire Alarm, • Specification writing and editing., • Energy conservation and sustainability/report technical writing., • Function as Project Discipline Team Leader on large, complex projects when assigned., • Responsible for directing and overseeing project team members within their own discipline. Level 4 is responsible for monitoring and executing team compliance with project budget., • Prepare and monitor project status reports., • Coordinate with Electrical Engineering Discipline Leader in preparing project Man-hour Estimates., • Prepare and document required code research for project., • Participate in the development of the project cost model and design to it., • Develop and maintain Electrical Basis of Design Journal throughout the life of the project., • Conduct material and product research as required for project development., • Attend project meetings as necessary., • Interface with other Project Discipline Team Leaders., • Respond to client questions/requests within 24 hours., • Document interpretation and submittal reviews during bidding and construction administration., • Monitor and mentor staff to produce quality architectural and engineering services within a project team concept., • Mentor support engineers to help prepare them for greater project responsibilities., • Provide regular feedback to the Electrical Engineering Discipline Leader on performance of support engineers., • Identify opportunities to improve quality and services, and participate in the implementation., • Participate in in-house training activities., • Participate in related professional organizations and activities., • Contribute to department discussions on field feedback, lessons learned, new technology or developments encountered., • Proven experience working on K-12 educational projects., • Bachelor's degree in Electrical Engineering and PE licensure required., • LEED Accredited preferred., • Minimum six years' experience in A/E industry preferred., • Ability to design fire alarm systems to DSA level requirements is preferred., • Extensive knowledge of all aspects of professional services from schematic design through project close-out, including design and technical expertise., • A comprehensive understanding of the coordination aspects and related requirements of all design disciplines., • Proficiency in short circuit and selective coordination calculation. Utilization of EDSA, SKM or other analytical modeling software preferred., • Excellent written/ verbal communication and strong organizational skills., • Possess the ability to motivate and mentor staff and delegate work assignments., • Computer and CADD/Revit literate., • Very detail-oriented, self-motivated, enthusiastic and flexible., • Capable of traveling to and from project sites for attending client, project and construction meetings., • Ability to access existing and new project sites for observation, investigation and evaluation purposes., • Ability to use equipment for communication and documentation purposes. #LI-DD1

Job Description🌟 Be a Part of Something Bigger! 🌟 At Luminator Technology Group, we believe we are Better Together. We always put the Customer First, focus on achieving Results, strive to Be the Best, and foster a culture of Respect & Trust. We are on a mission to innovate and revolutionize global transportation technology. Luminator is a global leader spanning over 85 countries and nearly 1,000 employees worldwide. We’re searching for a Senior Mechanical Engineer to join our growing Engineering team and play a key role in driving our vision forward. What You’ll Do: As a Senior Mechanical Engineer, you will be part of a team working to expand a strong and proven concept with solid growth potential. You’ll be responsible for developing mechanical components and technology for new and existing aviation-based interior and exterior lighting products for commercial and military aircraft. You will: • Design, develop, analyze, and document innovative new aircraft lighting products and systems to meet functional, cost, reliability, manufacturability, and safety requirements., • Execute design, analysis, and evaluation of assigned projects using sound engineering principles and aviation standards, including RTCA DO-160., • Document technical data in accordance with engineering policies and procedures., • Identify and implement tools, methods, and processes to improve quality, reliability, and productivity., • Apply advanced techniques and modified extensions of theories to solve a wide range of complex problems., • Identify and resolve defects, including field and production issues, using proper engineering tools and techniques., • Collaborate cross-functionally with internal teams and external partners to ensure product excellence., • Perform structural, thermal, and tolerance analyses to ensure product reliability and performance., • Other duties as required.What You’ll Bring to the Team:, • Strong communication skills for effective collaboration with co-workers, customers, and suppliers., • A continuous improvement mindset and a commitment to exceeding customer expectations., • Experience with structural, thermal, and tolerance analysis., • Experience with electrical/electronics packaging design, including machined components, sheet metal, and injection-molded plastics., • Proficiency in mechanical CAD systems such as:, • ANSYS, • CATIA V5, • SolidWorks, • SolidEdge, • Knowledge of total quality, lean manufacturing, and design for manufacturability., • Proficiency with Microsoft Office applications including Outlook, Teams, Word, Excel, and PowerPoint.Qualifications:, • Bachelor’s Degree in Mechanical Engineering (Advanced degree preferred)., • Minimum of 8 years of mechanical design experience., • Experience in a manufacturing environment preferred., • Prior experience with:, • LED lighting, • RTCA DO-160, • Electro-mechanical drivetrains and motorsWhy You’ll Love Working at Luminator:, • Competitive compensation with career growth potential., • Generous time off: Vacation and sick time, 10 company holidays, and 2 floating holidays., • Educational Assistance Program: Robust reimbursement program for professional growth., • Health and wellness: Medical, dental, and vision coverage plus 401k matching. Luminator Technology Group intends to provide a safe and drug-free work environment for our customers and our employees. As a condition of employment Luminator Technology Group will require a negative drug screen during the pre-employment process due to working on or with federal contracts. It is the policy of Luminator to ensure equal employment opportunity without discrimination or harassment on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, marital status, citizenship, national origin, genetic information, or any other characteristic protected by law. Luminator prohibits any such discrimination or harassment. The above described responsibilities and requirements are a general guide for the role you are applying for and are not all inclusive of the job requirements. Luminator Technology Group does not accept staffing agency candidates for our postings. All positions posted are required to be in office unless otherwise posted. It is the policy of Luminator to ensure equal employment opportunity without discrimination or harassment on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, marital status, citizenship, national origin, genetic information, or any other characteristic protected by law. Luminator prohibits any such discrimination or harassment. The above described responsibilities and requirements are a general guide for the role you are applying for and are not all inclusive of the job requirements. Luminator Technology Group does not accept staffing agency candidates for our postings. All positions posted are required to be in office unless otherwise posted. Powered by JazzHR 9kwwNU6jjp

Job Description Our top client in Plano, TX has a DIRECT HIRE opening! Job Title: MEP Project Engineer (Mechanical, Electrical, Plumbing) Position Summary: The MEP Project Engineer (Mechanical, Electrical, Plumbing) will oversee all aspects of safety, compliance, quality assurance, and turnover procedures related to capital projects within a data center environment. This role ensures that newly deployed infrastructure and systems meet operational and safety standards before being transitioned to the operations team. The manager will act as a key liaison among internal teams, contractors, and clients to maintain strict adherence to procedures, codes, and project requirements. Duties and Responsibilities: • Serve as Safety Committee Representative for the assigned campus or region., • Enforce Environmental Health & Safety (EH&S) policies across all project sites., • Collaborate with the Training Manager to ensure proper and timely training for all staff on newly implemented infrastructure and equipment., • Facilitate and critique emergency drills in coordination with senior site leadership and training staff., • Ensure adherence to company standards and runbooks for all capital projects., • Oversee project turnover processes, ensuring all documentation, systems, and operations meet acceptance criteria., • Drive completion of punch lists associated with construction and commissioning phases., • Conduct QA/QC on all procedures and documentation related to Methods of Procedure (MOPs) and Change Requests (CRs)., • Approve Level 1 and Level 2 change requests as designated by site leadership., • Perform QA/QC reviews of building systems and critical infrastructure, including mechanical, electrical, plumbing (MEP), and fire/life safety equipment., • Evaluate and monitor the performance and safety compliance of both employees and contractors., • Maintain consistent communication with tenants, clients, owners, and third-party vendors involved in capital projects., • Support documentation updates such as as-built drawings and system schematics., • Ensure compliance with all relevant codes, regulations, and industry best practices., • Act as a technical resource and subject matter expert to field technicians and site operations staff., • Serve as a liaison between internal departments, customers, and external contractors. Qualifications: • Minimum 5 years of progressive experience managing critical building systems and infrastructure., • Professional mechanical or electrical licenses strongly preferred., • Proficient in reading and interpreting complex documentation including project specifications, AutoCAD drawings, Visio diagrams, and PDFs., • Strong project management skills and ability to coordinate efforts across multiple stakeholders., • Ability to develop and implement installation standards and project tracking tools., • Skilled in verbal and written communication, including the ability to address complex issues and make formal presentations., • In-depth knowledge of applicable laws, building codes, and industry regulations relevant to MEP and data center projects., • Experience developing Requests for Proposal (RFPs) and capital budgets., • Strong analytical and problem-solving abilities with limited available data., • Ability to work independently and interpret instructions across various formats (written, verbal, visual)., • High commitment to customer service and continuous improvement., • Strong organizational skills with attention to detail and openness to process innovation., • Proficient in Microsoft Office Suite (Excel, Outlook, Word, PowerPoint)., • Occasional travel required for training, audits, or project coordination. Company DescriptionStaffing Technologies has 20+ Years of IT Staffing and Consulting Experience. Headquartered in Overland, KS, we have 9 Offices Nationwide and have 3 Global Delivery locations. Saicon, our Parent Company, specializes in and has rich experience filling various type of job roles (Both IT & Non IT) in Retail, Consumer Products and Brands, Insurance, Logistics and Travel, Banking and Financials, Manufacturing, Healthcare, and Life Sciences, Telecom, Media & Entertainment, Professional Services, Government and Public Sector.Staffing Technologies has 20+ Years of IT Staffing and Consulting Experience. Headquartered in Overland, KS, we have 9 Offices Nationwide and have 3 Global Delivery locations. Saicon, our Parent Company, specializes in and has rich experience filling various type of job roles (Both IT & Non IT) in Retail, Consumer Products and Brands, Insurance, Logistics and Travel, Banking and Financials, Manufacturing, Healthcare, and Life Sciences, Telecom, Media & Entertainment, Professional Services, Government and Public Sector.

Job DescriptionOptical Engineer Needed in Richardson, Texas! The successful candidate will be responsible for designing, developing, and testing optical systems and components. This role requires a strong foundation in optical engineering principles, as well as proficiency in system design and project scheduling. The ideal candidate will possess a blend of technical expertise and creativity to contribute to cutting-edge projects.Seeking applicants with the following qualifications: • Must be either a U.S. Citizen or Permanent Resident., • Must have strong manufacturing experience., • Must be able to work on-site in a full-time, regular position on day shift., • Must live within commuting distance to our Richardson, Texas location., • Must be able to pass a drug screen and a background check., • Must be able to work on-site on day shift Monday - Friday., • Bachelor’s degree in Physics coupled with 2-4 years’ work experience as an Optical EngineerDuties, • Design and develop optical systems, including lenses, mirrors, and sensors., • Conduct simulations using tools such as Simulink to model optical performance., • Collaborate with cross-functional teams to ensure project milestones are met., • Utilize CAD software for creating detailed designs and schematics., • Implement logic controllers for automated optical testing processes., • Perform debugging of optical systems to identify and resolve issues., • Use an Ohmmeter for testing electrical components within optical systems., • Ensure compliance with NEC standards in all engineering practices., • Participate in project scheduling to align resources and timelines effectively., • Provide technical support during the manufacturing and assembly of optical products.Qualifications, • Bachelor’s degree in Optical Engineering, Mechanical Engineering, or a related field., • Proficiency in system design principles and project scheduling methodologies., • Experience with Simulink for simulation of optical systems is preferred., • Strong skills in CAD software for design purposes., • Familiarity with logic controllers and their application in optical engineering., • Knowledge of using an Ohmmeter for electrical testing is advantageous., • Understanding of NEC standards related to optical engineering practices., • Proven debugging skills with the ability to troubleshoot complex systems effectively., • Experience with ARM architecture is a plus but not required.

Job Description Senior Embedded Hardware Design Engineer Applied Concepts, Inc. - Richardson, Texas Senior Embedded Hardware Design Engineer - Job Overview: Applied Concepts has an exciting opportunity at our Richardson R&D facility, where you will be contributing to our Intelligent Traffic Systems and Speed Enforcement product lines. You will help leverage our 48 years of technology expertise in Radar, Lidar, and traffic safety to provide our customers with advanced, connected, real-time information systems that deliver value ranging from optimized traffic patterns to life-saving hazard avoidance and speed enforcement. In this role, as a Senior Embedded Hardware Design Engineer, you will provide technical leadership for product development projects from a hardware perspective. You will work with a cross-functional team of experts to deliver innovative solutions spanning the entire product development life cycle, from planning and architecture development to production hand-off and continuous improvement activities. You must demonstrate excellent communication skills and be able to thrive in a fast-paced environment where today's collaboration and innovation drive tomorrow's successes. Senior Electronics Design Engineer - How you'll make an impact: • Provide technical leadership to the project team, driving technology implementation while ensuring high level objectives and milestones are met. Coordinate with cross functional resources to action and complete technical tasks., • Contribute and influence new ideas that expand markets and product lines., • Design high-performance, low-power edge computing platforms that combine the latest technologies in ARM SOCs, networking, camera systems, and AI-assisted analytics algorithms., • Design cutting-edge products that combine our expertise in microwave radar systems, optical lidar systems, and our cloud-based analytics platforms to deliver unique and high-value functionality to our speed enforcement and intelligent traffic systems customers., • Interface with Manufacturing, Quality Control, and Customer Service to provide technical product insights into new and existing products., • Stay technically abreast of emerging technologies, techniques, and methodologies to support an inventive environment. Senior Electronics Design Engineer - What you'll need to succeed: • 7-10+ years of experience in high-level hardware architecture design and development, with an emphasis on embedded systems for harsh/outdoor environments., • Proficient knowledge of and implementable experience with various bus communication protocols., • Proficient knowledge of and implementable experience with various wireless technologies., • Experience in supporting production testing and maintenance of embedded systems., • Experience in working with cross-functional teams and providing system-level support., • Proficient CAD skills., • Proficient design analysis skills., • A comprehensive, broad knowledge of product development and system integration., • Ability to mentor and/or supervise technical staff, as needed., • Develop relationships with key suppliers., • Ability to fearlessly solve problems in any engineering discipline - through others, if necessary., • A four-year Engineering degree is required; a master's degree in engineering or computer science is an advantage., • Highly desirable: working knowledge of embedded firmware and DSP's and direct experience in developing high performance, low-power Linux based computing platforms. Senior Electronics Design Engineer - What you'll gain: • Competitive compensation and benefits, • Rewards and recognition programs, • Immersive learning and development opportunities, • Convenient office location, • Flexible vacation policy, • Excellent work/life balance, • Great culture and collaborative environment Who we are: Applied Concepts is a 48-year-old, 250-person privately owned company, located in Richardson, Texas. Founded in 1977 by an electrical engineer, we have a long history of profitable, organic growth. Our company remains entrepreneurial at heart, constantly re-inventing ourselves with new products and new markets, but still balanced with business prudence. We manufacture our own products, in our own facilities. Integrating our product development with our own manufacturing resources is a key part of our business culture, keeping us nimble and able to provide high quality products. What we do: We focus on designing, manufacturing, and selling products that promote public safety. We are the number one supplier of speed enforcement products to law enforcement in the United States. Our employees take pride in the quality of our products and the service we provide in keeping our streets and neighborhoods safe. We offer a variety of engineering challenges, from microwave to high-speed lasers, to image capturing and processing, and LED speed calming devices. To learn more about us and apply for the position, please visit: We are looking for full-time employees. U.S. Citizenship or U.S. Permanent Resident (Green Card) required. Sorry, NO Sponsorship for U.S. visas (no H-1B, etc.). Only qualified candidates selected for an interview will be contacted.

Job DescriptionDescription: Chief Engineer Department: Property Operations and Maintenance Reports To: General Manager FLSA: Exempt Job Summary The Chief Engineer is responsible for assisting with the operation, maintenance, service and repair of equipment as assigned. He/she is also responsible for participating in the preventative maintenance program, handling guest requests and other work orders as assigned. He/she is also responsible for performing the job in a safe and efficient manner and performing trade jobs, such as carpentry, painting, plumbing, etc. May require driving a shuttle van when needed. Education & Experience • At least 5 years of progressive experience in a hotel or related field or equivalent education, • High School diploma or equivalent required., • Licensed in a trade preferred (plumbing, electrical, HVAC, carpentry, etc.)., • Must have a valid driver’s license for the applicable state., • Supervisory experience preferred., • Must have an acceptable MVR (Motor Vehicle Driving Record) property specific Job Duties & Functions • Assist with the operation, maintenance and repair of equipment., • Train and supervise the hourly Engineering staff and coordinate all scheduling., • Coordinate all inspections of the fire safety systems including extinguishers, smoke alarms, etc. to maintain proper safety standards, • Responsible for the work of all staff and contractors or outside laborers., • Change out light bulbs; perform preventative maintenance for guest rooms to include: vinyl repair, touch up paint, minor furniture repair, tub caulking, tile repairs, etc., • Perform preventative maintenance for ice machines, refrigerators, kitchen equipment, laundry equipment, HVAC, guestrooms, meeting rooms, the swimming pool and hot tub., • Perform plumbing repair, laundry equipment repair, preventative maintenance on all exhaust fans and supply; monitor energy conservation; repair vacuum cleaners and any other small equipment upon request., • Immediately follow up on any alarms to determine the exact location and cause - determine emergency status and report to the Front Desk with findings. • Perform other tasks/jobs as assigned by the supervisor or manager. Working Conditions/Environment The following outlines the work environment employees will encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. General This job description is not intended to be all-inclusive; additional details will be specified by the direct supervisor. The associate may also perform other reasonable business duties assigned by their direct supervisor. Dreamscape Hospitality reserves the right to change this job description, job responsibilities, duties, and working hours as needs prevail. Dreamscape Hospitality is an at-will employer. This document does not constitute a contract of employment, and nothing contained in this job description issued by Dreamscape Hospitality is intended to create a contract of employment or guarantee employment. is a guideline and does not constitute a written or implied employment contract. Requirements: Hotel is currently under renovation and will be opening in Q1 2026 as a White Label Marriott.

Job DescriptionCompany Description ABOUT STREAM REALTY PARTNERS Founded in 1996, Stream Realty Partners (Stream) began with a vision. Not one focused on bricks and mortar, but with people at its foundation. Headquartered in Dallas, TX and operating in core markets coast to coast, we complete billions in annual transactions in office, industrial, retail, healthcare, land, and data center properties. With millions of square feet of assignments, Stream is one of the fastest-growing, full-service commercial real estate services organizations in the country. Our team of talented individuals have come together to create our distinct culture, best summarized by our firm’s core values: smart, honest, nice, and passionate. For more information, visit and follow Stream on LinkedIn, Instagram, X and Facebook. IMMEDIATE IMPACT. MEANINGFUL CAREER. At Stream, we know our success begins and ends with our people. It is the reason we work hard to attract and retain the best and brightest talent. From day one, you will be an integral member of our high-caliber, collaborative team. We will empower you to apply your energy, expertise, and creativity to meet our client’s needs while instilling you with unsurpassed market knowledge and development opportunities to succeed. When you join Stream, you won’t simply start a new job—you will build a meaningful and impactful career. Job Description POSITION OVERVIEW A successful Building Engineer does more than follow orders. They are consistently thorough and committed to keeping building systems and equipment in good order while supporting other members of the property and team. They provide concierge-style service to the tenants at our buildings and are constantly looking for ways to improve the experience for all who come to their properties. They execute preventative maintenance to keep systems and equipment in good repair and prolong their useful life. They are keenly aware of their surroundings to ensure the property maintains an outstanding appearance. Refrigeration experience is a plus for this cold storage facility, onsite training is available. Industrial type environment for mechanical spaces to include general base building maintenance duties. RESPONSIBILITIES HVAC Assignment • Installs, inspects, repairs, and maintains mechanical, heating, ventilation, and air conditioning systems and related components., • Installs, inspects, and repairs electrical systems and related components., • Installs, inspects and maintains building structural systems and related components., • Fabricates, installs, inspects, and maintains electronic systems and subsystems (i.e., burglar and fire alarm, energy management, CAD)., • Leads other trade workers on special assignments and/or projects., • Provides training and guidance to other trade workers., • Installs, repairs, and replaces doors, windows, and building hardware., • Assembles, installs, repairs, and/or fabricates institutional furnishings and equipment., • Performs rough and finish carpentry and plastering/drywall of buildings and equipment., • Perform preventative maintenance and corrective repair of buildings, industrial systems, vehicles, equipment, and grounds., • Align and ensure all applicable codes, regulations, governmental agency, and company directives related to building operations and work safety are adhered to., • Inspect building systems, including but not limited to fire alarms, HVAC, and plumbing to ensure the operation of equipment is within design capabilities and achieves environmental conditions prescribed by the client., • Perform contract work which could include landscaping, snow removal, HVAC, plumbing, and cleaning., • Other duties as assigned. Qualifications, • Thorough knowledge of all building systems operations, maintenance, and repair, • Must have a thorough understanding of HVAC, electrical, plumbing, and building automation systems., • Knowledgeable in energy management systems, techniques, and operations, • Understanding of multi-meter amp probe, anemometer, pressure gauges, drain auger, and other industry standard tools/equipment., • Operate and use necessary manual and power-driven tools., • Ability to read and understand plans and prints., • Basic skills with Microsoft Office Outlook, Word, Excel, and Teams, • Ability to comprehend and interpret instructions and memos and ask clarifying questions to ensure understanding., • Ability to efficiently present information to an internal department and/or large groups of employees, • Reliable transportation, • Strong organizational and analytical skills, • Appropriate license/permit for trade as may be required by local or state jurisdictions., • High school diploma or general education degree (GED) and a minimum of two years of related experience and/or trade school training or equivalent combination of education and experience., • A minimum of 3 years building maintenance experience., • Mobility of stooping, standing, climbing, and frequent lifting of a minimum of 50 pounds of equipment, • Ability to safely install rigging/lifting devices., • Climbing ladders and stairs, • May require shift work and/or on-call duties., • May be required to work extended periods of time without relief when responding to priority/emergency situations., • Work under limited supervision Additional Information #LI-Onsite Stream is an equal-opportunity employer and does not discriminate on the basis of ethnicity, race, religion, sexual orientation, gender identity, age, national origin, disability, military status, or any other reason prohibited by law. Stream Realty Partners offers competitive salaries, bonuses, medical/dental/vision insurance, pharmacy benefits, health savings account, flexible spending accounts, 401(k) plan with company matching, PTO, and holiday pay. Individual compensation packages are based on various factors unique to each candidate, including skill set, experience, qualifications, location, and other job-related reasons. To apply for a position, please visit our website at

Job DescriptionDescription: Job Purpose The Senior Electrical Engineer will have overall responsibilities for the electrical design on a project. The position will collaborate and direct other electrical staff during the design and documentation of the electrical system. The position will coordinate the electrical design with all other disciplines so that the design is completely coordinated internally as well as with external clients. Duties and Responsibilities The primary duties and responsibilities of this position include the following: • Prepare design documents appropriate for the project and in accordance with company standards., • Advise and mentor staff to help in their growth, • Monitor project status and development to meet project deadlines, • Coordinate the completion of the documents in the appropriate time to have a QA/QC review completed prior to the deadline for the project, • Coordinate staffing manpower needs weekly with the Project Manager, • Assist in interviewing and providing feedback on possible future personnel, • Review the electrical budget hours and coordinate any recommended adjustments with the Project Manager Beyond any specific outside education classes taken to maintain professional registration, 10 hours of company continuing education shall be required. This would include attending/teaching company discipline training classes or appropriate approved outside training classes. Although attending vendor classes is encouraged to keep up with technology, this will not count toward the 10 hours of in-house training. Working Conditions This position requires night and weekend work at times to complete projects to meet deadlines. Direct Reports None Requirements: Qualifications The following qualifications are requirements of the position: • Registered Professional Engineer with approximately 10 years, • Experience should be specific in healthcare, education, commercial, federal and light industrial sectors, • Ability to meet and socialize with clients to foster future repeat work, • Able to work well and communicate with other disciplines within the firm as well as other consultants on the project., • Excellent interpersonal and communication skills The ability to carry up to 50 lbs. of drawings and carry and/or climb ladders is a requirement of the position.

Job Description We’re seeking a motivated and technically curious individual to join our growing cybersecurity team as an Automotive Cybersecurity Test Engineer. In this role, you’ll support the evaluation and validation of cybersecurity requirements across a wide range of modern automotive systems. You’ll help shape how vehicle cybersecurity testing is performed— executing hands-on tests, refining test procedures, researching emerging solutions, and developing tools that improve how requirements are verified in real-world applications. This is a growth-oriented role designed for someone with 1 to 3 years of experience in computer or hardware systems who is eager to deepen their knowledge in vehicle cybersecurity and become a technical contributor in a rapidly evolving field. • Perform hands-on testing to verify and validate cybersecurity requirements across cybersecurity relevant vehicle systems., • Develop and refine cybersecurity test procedures for in-vehicle systems and connected ecosystems., • Research emerging cybersecurity threats, tools, and solutions related to automotive systems., • Translate security requirements into actionable test strategies and contribute to a comprehensive cybersecurity testing playbook for internal team use., • Collaborate with engineering teams to ensure test procedures align with evolving system architectures and security requirements., • Develop internal tools, scripts, or frameworks to support and automate the evaluation of cybersecurity requirements., • Bachelor’s degree in Computer Engineering, Electrical Engineering, Computer Science, or related field., • 1 to 3 years of industry or academic experience working with hardware systems, embedded software, or computer security., • Familiarity with vehicle architectures, embedded systems, or automotive networking (CAN, LIN, Ethernet) is a plus., • Strong understanding of APIs and application security, with hands-on experience in authentication protocols like OAuth, SAML, etc., • Interest in modern connected vehicle systems including mobile app integration, cloud-based services, and EV infrastructure., • Strong interest in cybersecurity and willingness to learn hands-on techniques related to threat modeling, test design, and system evaluation., • Ability to document technical processes clearly and follow structured workflows., • Proficiency in scripting or programming languages (e.g., Python, C/C++, Bash) is preferred., • Self-motivated, detail-oriented, and collaborative.

Job Description Lead Commissioning Engineer - Protection Relays Join a team where your expertise is championed and your career can flourish! As a Lead Commissioning Engineer, you'll be at the forefront of cutting-edge electrical testing and commissioning projects at substations and generator plants. Your role not only impacts critical infrastructure but also contributes to a company that values growth and employee ownership. Experience a collaborative environment where innovation and safety go hand in hand, and where you can make a significant impact every day. Key Qualifications: • Proficiency with protection relays from leading brands such as GE, SEL, ALSTOM, SCHNEIDER, SIEMENS, and ABB., • Strong grasp of AC/DC diagrams and the ability to devise detailed testing procedures.

Job Description RF Microwave Design Engineer Applied Concepts, Inc. - Richardson, Texas RF Microwave Design Engineer - Job Overview: Applied Concepts has an exciting opportunity at our Richardson R&D facility, where you will be contributing to our speed enforcement radar products. You will help leverage our 47 years of technology expertise in Radar, Lidar, and traffic safety to provide our customers with advanced, connected, real-time information systems that deliver value ranging from optimized traffic patterns to life-saving hazard avoidance. In this role, you will provide domain expertise in microwave product development projects from a design and development perspective. You will work with a cross-functional team of experts to deliver innovative solutions spanning the entire product development life cycle, from planning and architecture development to production hand-off and continuous improvement activities. You must demonstrate excellent communication skills and be able to thrive in a fast-paced environment where today's collaboration and innovation drive tomorrow's successes. RF Microwave Design Engineer - How you'll make an impact: • Designing and modeling RF/Microwave Antennas and elements from 1 GHz to 50 GHz, utilizing computer design tools such as HFSS, ADS, CST, GRASP, WIPL, MATLAB etc., • Designing prototypes and providing sustaining engineering support for custom Radio Frequency/Microwave assemblies and sub-systems., • Analysis and test of RF/Microwave Antennas, hybrids, feed structures, filters and elements., • Defining and conducting tests to validate performance of RF designs to requirements., • Managing appropriate aspects of supplier and partner performance to ensure compliance to requirements., • Being a self-motivated team player capable of working with minimum direction. RF Microwave Design Engineer - What you'll need to succeed: • Bachelor of Science in Electrical Engineering or equivalent STEM degree with 2-5 years of industry experience in RF Microwave Design., • Hands-on trouble shooting and analysis of RF and microwave circuits and designs using engineering methods and standard lab equipment., • Various packaging techniques and operating environments and the design opportunities and challenges they bring., • Hands-on experience with state-of-the-art RF components and test equipment., • Minimum of 2 years' experience designing and developing advanced microwave and millimeter wave subsystems and components., • Experience with linear simulators and EM simulators., • Two (2) + years' experience in RF/Microwave Antenna design., • Two (2) + years' experience with RF measurements including VSWR, Insertion Loss, Phase, Coupling, Pattern and Gain measurements, Radar Cross Section., • Familiarity with analysis tools such as HFSS. What you'll gain: • Competitive compensation and benefits, • Rewards and recognition programs, • Learning and development opportunities, • Convenient office location, • Flexible vacation policy, • Excellent work/life balance, • Great culture and collaborative environment Who we are: Applied Concepts is a 47-year-old, 250-person privately owned company, located in Richardson, Texas. Founded in 1977 by an electrical engineer, we have a long history of profitable, organic growth. Our company remains entrepreneurial at heart, constantly re-inventing ourselves with new products and new markets, but still balanced with business prudence. We manufacture our own products, in our own facilities. Integrating our product development with our own manufacturing resources is a key part of our business culture, keeping us nimble and able to provide high quality products. What we do: We focus on designing, manufacturing, and selling products that promote public safety. We are the number one supplier of speed enforcement products to law enforcement in the United States. Our employees take pride in the quality of our products and the service we provide in keeping our streets and neighborhoods safe. We offer a variety of engineering challenges, from microwave to high-speed lasers, to image capturing and processing, and LED speed calming devices. To learn more about us and apply for the position, please visit: We are looking for full-time employees. U.S. Citizenship or U.S. Permanent Resident (Green Card) required. Sorry, NO Sponsorship for U.S. visas (no H-1B, etc.). Only qualified candidates selected for an interview will be contacted.

Job Description About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We design, build, and test next generation weapon systems to give America and its Allies a definitive edge in defense capabilities. Principal Manufacturing Engineer Castelion is seeking a principal manufacturing engineer to join our Radar development team. In this role, you will own the end-to-end transition from prototype to full-scale production. You will architect and implement manufacturing processes to achieve aggressive production cost, quality, and delivery targets. Core Responsibilities: Define & Scale Manufacturing Processes Lead R&D-to-production transition by capturing existing (yet informal) production flows, formalizing them, and architecting scalable, high-throughput processes (e.g., tooling, layout, SOPs, PFMEA). Design a greenfield production site from scratch to produce radars at scale. Production Test Equipment Selection and Implementation Specify stations and necessary equipment for each production step-defining functional requirements, safety interlocks, interfaces, and use cases. Manage procurement and coordinate with hardware and software teams to ensure integration and deployment Data Capture & Quality Control Collaborate with design engineers and software teams to define what data to collect, set process control limits, and enable data capture, validation, storage, and visualization (e.g., dashboards, SPC tools) Troubleshooting & Continuous Improvement Provide technical support to resolve production issues, lead root-cause analysis, and drive continuous improvements in quality, cost, and throughput Cross-Functional Collaboration & Documentation Engage with R&D, design, test, operations, and suppliers to align manufacturing needs with design intent. Maintain up-to-date, accurate documentation for flow processes, test systems, and manufacturing specs Mentorship & Influence Act as the go-to expert for electronics production and test. Provide guidance to less experienced engineers and influence the company's overall approach to electronics production. Basic Qualifications: • Bachelor's degree in Mechanical, Electrical, Aerospace, Systems, or Manufacturing Engineering (or related field), • Proven record in supporting NPI, pilot runs, and transition to production-delivering robust and scalable manufacturing systems., • Demonstrated success in troubleshooting complex build issues and driving corrective actions., • Skilled at interfacing with design, systems, test, and supplier teams to close the loop on manufacturability and production readiness., • Experience in regulated or defense environments, • Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support., • High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. Our Mission Critical Team is seeking a senior technical expert to provide advanced engineering leadership and hands-on expertise in the design and delivery of complex automation and control system integration projects. Our Principal Engineers ensure that solutions are innovative, reliable, and aligned with customer requirements, while mentoring engineers and project managers and supporting business development efforts. You will: • Lead the technical design and architecture of advanced automation, control, and system integration solutions., • Serve as subject matter expert (SME) across multiple platforms (Building Design, Panel Design, Instrumentation, PLC, HMI, SCADA, MES, Historians, Networks, and VFDs)., • Provide hands-on engineering support for system design, programming, testing, and commissioning of automation projects., • Collaborate with project managers and engineering managers to define project scope, technical requirements, and resource needs., • Mentor and guide engineers and technical staff, promoting knowledge sharing and professional development (there is potential to manage a team of 3-5 in the future)., • Conduct design reviews, troubleshoot complex technical issues, and ensure compliance with engineering standards and industry regulations., • Support proposal development with technical input, risk assessments, and cost estimates., • Act as a technical liaison with customers, presenting solutions, clarifying requirements, and ensuring satisfaction., • Evaluate and recommend emerging technologies to enhance integration capabilities and business competitiveness., • Contribute to the development and enforcement of engineering best practices and standards across the organization., • Serve as an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. You have: • Bachelor's degree in Engineering., • Professional Engineer (PE) License in Virginia, Texas, or other - Electrical Engineering preferred., • 10+ years of progressive engineering experience in automation, controls, or system integration., • Deep technical expertise in one or more major automation platforms (Allen-Bradley, Siemens, Schneider, Wonderware, Ignition, etc.)., • Strong knowledge of industrial communication protocols, networking, and system architecture., • Demonstrated experience in delivering complex, multi-discipline integration projects., • Excellent problem-solving, analytical, and troubleshooting skills., • Strong communication skills with ability to interact with customers, vendors, and cross-functional teams., • Willingness to travel to customer sites as needed for design, testing, and commissioning - 30-40 percent domestic., • A DNA comprised of collaboration and teamwork. Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. E Tech Group is an Equal Opportunity Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. E Tech Group is an Affirmative Action Employer of individuals with disabilities and protected veterans.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are looking for a Lead Controls Engineer with deep expertise in automation and controls systems design for data centers. In this role, you will lead the engineering design of complex control systems, including building automation, power monitoring, environmental controls, and integration with DCIM systems. You will be a technical leader and mentor, ensuring high-quality, standards-compliant designs that meet client and project specifications across multiple concurrent initiatives. This position is ideal for a senior-level engineer with experience delivering large-scale, mission-critical controls systems in the data center industry, who is passionate about technical excellence and mentoring junior engineers. Remote role but MUST be located in or around (or willing to relocate to) one of the following areas: Huntsville, AL, Tulsa, OK or West- Central TX. Key Responsibilities • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field, • DNA comprised of collaboration and teamwork., • 7+ years of experience in controls and automation engineering, including:, • 3+ years focused on data center controls design, • Experience with BMS/BAS systems (e.g., Tridium, Honeywell, Siemens, Schneider), • Familiarity with PMS/EPMS integration (e.g., Ignition), • Proficient in developing controls system documentation (SOO, network diagrams, control panel layouts, etc.), • Knowledge of HVAC systems, electrical infrastructure, and critical facility operations, • Strong understanding of PLC, HMI, and SCADA platforms, • Experience with data center standards such as ASHRAE TC 9.9, Uptime Institute Tier levels, and TIA-942, • Familiarity with DCIM platforms and integration, • Professional Engineering (PE) license or ability to obtain, • Experience working in an EPC or Design-Build environment, • Hands-on experience with commissioning and site support, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off.

Job Description We are seeking a highly motivated Cyber Security Engineer to join our innovative team. You will play a critical role in supporting the development, testing, and guidance of our proprietary security application—designed, built, and deployed entirely in-house. This includes working closely with our engineering teams who design custom hardware boards and write low-level code to push firmware and software updates. This is a unique opportunity to apply your cybersecurity expertise in a hands-on environment where hardware meets software. Key Responsibilities: • Collaborate with hardware and software engineering teams to assess the security implications of system architecture and custom components., • Design and execute rigorous security tests on our in-house application, including penetration testing, code review, and threat modeling., • Provide detailed feedback and guidance to developers to improve the security posture of the platform from early development stages through production., • Assist in the development of secure coding practices, deployment policies, and incident response procedures., • Monitor, analyze, and respond to vulnerabilities in both custom and third-party libraries used in our stack., • Contribute to secure build and deployment pipelines with a DevSecOps mindset., • Bachelor's degree in Cybersecurity, Computer Science, Electrical Engineering, or related field (or equivalent experience)., • 10+ years of experience in cybersecurity, preferably with experience in embedded systems or application security., • Proficiency in static/dynamic code analysis tools, fuzzing, reverse engineering, and vulnerability scanners., • Knowledge of common security frameworks (e.g., NIST, OWASP, MITRE ATT&CK)., • Experience working with low-level languages (C/C++) and scripting languages (Python, Bash)., • Experience with secure boot, TPM, HSM, or custom board-level security implementations., • Knowledge of communication protocols like SPI, I2C, UART, or CAN., • Familiarity with secure firmware update mechanisms and hardware debugging tools (e.g., JTAG, logic analyzers)., • Work at the intersection of hardware innovation and cybersecurity., • Be part of a tight-knit team building something truly proprietary and mission-critical., • Opportunity to shape security protocols for systems built entirely in-house., • Competitive compensation, benefits, and the chance to have a real impact.

Job DescriptionThis position will have the opportunity to design electrical systems for exciting new construction and renovation projects, with a focus on the design of systems supporting mission-critical facilities. Projects will be multi-discipline, and the ability to adeptly coordinate with other disciplines is required. The ideal candidate will produce drawing markups and specifications; coordinate design requirements with other disciplines, as well as act as the Lead Engineer for the electrical discipline on assigned projects by reviewing designs and calculations for accuracy and quality and assisting in the overall efforts to effectively manage project quality, schedule and budget.Responsibilities: • Collaborate with our clients to understand their needs, constraints, and criteria for success., • Develop design solutions, weighing the benefits and risks of various options, and helping the client choose a path forward., • Lead the project team in developing design documents (conceptual design, equipment selection, construction drawings, specifications, energy modeling, etc.), • Coordinate all design disciplines to ensure a comprehensive, code-compliant, and constructable design., • Manage the client’s expectations throughout the design process., • Communicate with colleagues, external consultants, and vendors to meet objectives and schedules., • Serve as the Owner’s representative during construction (RFI response, Submittal review, Site inspections, etc.)

Job Description About Wilson Connectivity: Join the team at Wilson Connectivity and be a part of our mission to connect everyone, everywhere! As the industry leader in wireless connectivity solutions, we're bringing 5G connectivity to businesses and consumers in their homes, workplaces, and beyond. But we're not just committed to developing innovative products - we're dedicated to developing great people. That's why we've been recognized as a "Best Companies to Work For" six times by Utah Business. Our strong work culture drives high employee satisfaction, and we're looking for individuals who are passionate about making a positive impact. Position Overview: We are looking for an experienced Embedded Software Engineer that is responsible for the development and maintenance of embedded RF firmware and application software in RF signal amplifiers/repeaters. The engineer will participate in all phases of software development, including requirements analysis, algorithm design, coding, integration, testing and documentation. The engineer will adhere to team development standards for software processes and work as a part of a multi-disciplinary, multi-site team. The engineer will contribute to multiple application development specialties, including user interface development, mathematical and logical algorithm development, database structure design, and both RTOS and bare metal programming. Position benefits: This full-time position has a competitive salary based on experience, plus the opportunity to earn an additional company bonus based on company and individual performance every 6 months. This position will be based in Richardson, TX and reports to our Sr. Software Engineering Manager based in Richardson, TX. Our employees enjoy a total rewards benefit package including a highly competitive salary and bonus plan, generous 3 weeks of PTO starting on day one, 10 paid holidays, matching 401k, health insurance, tuition reimbursement, paid parental leave, wellness programs, employer paid disability and telemedicine. A day on the job may include: • Design and implement new firmware for multiple architectures and platforms, unifying functions when possible., • Design and implement new features and algorithms into RF signal amplifiers/repeaters., • Design and develop custom firmware to support new product prototypes and advance technology., • Develop initial board bring-up firmware for testing embedded RF system hardware., • Identify and implement improvements to existing/legacy product firmware., • Support released firmware in the field as needed., • Perform software integration and validation testing with hardware systems, • Document software functionality (theory of operation), • Develop and implement automated test procedures to streamline standard RF test functions., • Contribute to the system design of new RF products, • Minimum of 5 years in a similar position, • B.S. degree or higher in Computer Engineering, Computer Science, Electrical Engineering, or related STEM major, • Demonstrated experience with microprocessors through full product life cycle, • Extensive skill in structured firmware design, documentation, and coding standards / best practices, • Extensive knowledge of C/C++ in embedded platforms, • Experience working with communication protocols, device drivers, and sensors, • Experience working with a variety of 8, 16, and 32-bit microprocessors (STM, Microchip, etc.), • Experience working on consumer products, • Knowledge of communication devices and components, wireless RF devices, and RF theory, • Hands-on experience troubleshooting problems that occur in electronic RF systems at the component level, • Knowledge in the sending and receiving of packets through communications protocols such as I2C, SPI, and RS232, • Software development experience with cellular RF and/or IoT products, • Experience using electronics test equipment such as Oscilloscopes, Digital Multimeters, Network Analyzers, Spectrum Analyzers, Signal Generators, and Logic Analyzers, • Experience in web development, • Must be familiar with Source Code Version Control tools, • Must be familiar with Bug/Issue Tracking tools, • Must be well organized, timely, and detail oriented, • Must be able to work independently and within a team with minimum supervision and able to understand and resolve issues with minimal assistance, • Must be able to multi-task simultaneous projects/assignments, • Must be able to communicate clearly and effectively, keeping team members and management informed of progress and issues A background check and drug screen is required upon accepting an offer of employment. Job Posted by ApplicantPro

Job DescriptionDescription: Are you ready to bring excitement and innovation to the world of automation controls engineering? Look no further! We’re seeking a talented individual to join our family-friendly team where fun meets cutting-edge technology. Cates Controls Systems is headquartered in Wylie, TX and is looking to hire a Senior Controls Engineer. Joining the Cates team is both challenging and rewarding. You will become an important member of a very talented and dynamic team within our industry. Why Join Us? · Work with an innovative, growing team in automation and controls · Contribute to exciting, diverse projects in industries like food, beverage, and manufacturing · Thrive in a values-driven company culture that puts people first · Opportunity for leadership, innovation, and continuous learning Job Purpose: As a Senior Controls Engineer, you will lead project execution from concept to commissioning for a wide range of automation systems. You’ll be hands-on in designing, programming, implementing, and optimizing control and MES systems—while mentoring junior engineers and guiding teams through complex automation challenges. Key Responsibilities: 1. Demonstrates knowledge and implementation of Business Intelligence systems; i.e. Wonderware System Platform, Inductive Automation, Dashboard programming, etc., 2. Database Development and Design., 3. SQL Query Optimization., 4. Data Modeling and Database Administration., 5. Troubleshooting and Debugging SQL Code and stored procedures., 6. Proficiency in SQL Programming., 7. Strong Knowledge of Database Management Systems (DBMS), 8. Data Analysis and Reporting., 9. Demonstrates knowledge and implementation of design strategies for enterprise databases, data warehouse systems, and multidimensional networks., 10. Set standards for database operations, programming, query processes, and security. Model, design, and construct large relational databases or data warehouses., 11. Identify changes in scope and notify Project Manager in a timely manner, 12. Assist in the design of control systems (I/O and Motor lists, P&IDs, etc.), 13. Develop approaches to solve problems, handle customer demands, changes and complaints, 14. Guide less experienced employees technically, 15. Contribute a broad technical competence to the team, along with superior communication, correspondence, and mediation skills, 16. Assist in managing project’s resources, schedule, budget and scope, 17. Provides input and resolves issues during the Estimating and Fabrication processes, 18. Create Functional Requirements Specification documents with the corresponding FAT and SAT plans, 19. Develop MES systems and procedures for customers to help meet their needs., 20. Design and develop database structures and systems to integrate into control and process systems., 21. This position will require about 50% travel, both domestic and international. Education and Experience: • BS Degree in Engineering or equivalent in Automation experience plus ten years of experience, • Leadership Training, • Ability to lead teams, • Communication, • Demonstrate mastery of Automation programming software, • Read and modify electrical schematics, PFDs and P&IDs, • Strong communications skills and ability to incorporate high performance teams of diverse individuals, • Can set the direction for an entire project team, • Excellent customer service skills with a proven record of high client satisfaction, • Requires only periodic direction from the Project Manager, • Demonstrate strong communication with colleagues, management and customers, • Completes tasks on schedule, • Complies with the rules, procedures and policies as delivered by the organization 22. RS Logix, 23. Wonderware System Platform, 24. Rockwell FactoryTalk View Studio, 25. OSHA, 26. NEC / UL 508A, 27. VFD Setup (A-B, Yaskawa, Mitsubishi, etc.), 28. AutoCAD, 29. Solve problems and learn quickly, 30. Provide technical competence during project execution, 31. Help in the design and implementation of control systems More About Us Cates Control Systems was founded over 40 years ago and is an award-winning systems integration company that partners with manufacturing firms to develop and implement automation solutions to increase production, improve quality and reduce costs. Our customers are extremely diverse and spread all over North America (and a few internationally). Our customers make roofing shingles, fry potato chips, roast coffee, process poultry and beef, distill water, bottle apple juice, and ship all over the world. Cates is committed to delivering quality solutions that we stand behind through service and support. Our vision is to positively impact the lives of others. We are a fun, friendly company with a strong family atmosphere and 12 core principles that guide us at every step in our success. Our culture is firmly rooted in the values of honesty, integrity, commitment, and reliability. To learn more about Cates, please visit us at . Job Type: Full-time Pay range: $120-$145k Benefits: • 401(k), • Dental insurance, • Flexible schedule, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Referral program, • Monday to Friday, • 50% (Preferred)Requirements:

Job Description Senior Controls Engineer – Addison, TX (#F0008) Location: Addison, TX Employment Type: Full-Time About Impact Recruiting Solutions: Impact Recruiting Solutions is a specialized recruitment firm connecting top engineering talent with leading industrial automation companies. We partner with innovative firms to match skilled professionals with roles that drive technological advancement and operational excellence. Position Overview: We are seeking an experienced Senior Controls Engineer to lead automation projects for a dynamic industrial automation firm. This role requires expertise in PLC, HMI, SCADA, and DCS/DeltaV systems, along with project management capabilities. The ideal candidate will design, implement, and commission control systems while mentoring junior engineers and ensuring project profitability. Key Responsibilities: • Design and implement control system architectures (PLC, DCS, HMI/SCADA)., • Develop schematics, panels, and network designs (under 480VAC)., • Lead project execution, including budgeting, scheduling, and profitability., • Commission systems on-site and troubleshoot technical issues., • Mentor junior engineers and collaborate with cross-functional teams., • Education: Bachelor’s in Electrical/Control, Mechanical, or Chemical Engineering (or related field), • Licensure: PMP certification a plus, • Experience:, • 8+ years in industrial automation (PLC, HMI, SCADA, DCS/DeltaV)., • 2-3 years minimum with Emerson DeltaV platform., • Experience in PLC-5 to ControlLogix conversions., • Project management for systems up to $10M., • Technical Skills:, • PLC platforms: Rockwell Automation, Siemens, Modicon, • HMI/SCADA: Ignition, FactoryTalk, Aveva, GE iFIX, • Programming: Ladder Logic, Structured Text, VBA, SQL, Python, • Industrial networking: Ethernet/IP, Profinet, Modbus, • Competitive Compensation: Earn an attractive salary, • Comprehensive Benefits:, • Generous Benefits Package, • Work Schedule: Full-time with 25% travel (primarily local), • Professional Growth: Lead high-impact projects and advance your technical and leadership skills, • Impactful Work: Develop cutting-edge automation solutions for industries like Semiconductor, Life Sciences, and Food & Beverage

Job Description APCON, Inc. is on the lookout for a passionate Firmware Engineer to be a contributor to our next-generation embedded systems. In this role, you will be assisting in the design, development, testing, and implementation of firmware solutions for a variety of products. You will work closely with cross-functional teams to deliver innovative products and contribute to the ongoing success of our projects. Responsibilities • Assist in the development, debugging, verification, and validation of firmware, software, and hardware for current and future network switch solutions, • Support the analysis of hardware and firmware requirements to assess design feasibility within project timelines and budget, • Collaborate with experienced engineers to understand system-level performance and operational needs, • Participate in technical discussions to gain exposure to product requirements and design processes, • Help create and execute basic unit and functional tests to ensure product quality, • Contribute to updates and improvements on existing product lines under guidance, • Work both independently and as part of a team to meet project milestones and delivery goals Education & Qualifications • Bachelor's degree in Computer Science, Electrical Engineering, or equivalent experience, • 1-3 years of experience in embedded systems or firmware development, • Familiarity with one of the following: networking concepts, cybersecurity fundamentals, or data center technologies, • Familiarity with one of the following: networking concepts, cybersecurity fundamentals, or data center technologies Core Competencies: • Excellent organizational, planning, presentation, troubleshooting, and multi-tasking skills, • Ability to maintain a high level of confidentiality and professionalism, • Ability to prioritize tasks, stay flexible in a fast-paced environment, and maintain strong attention to detail, • Must be able to work independently and as a team member About APCON APCON Inc. is a leader in network security solutions, with scalable hardware and intuitive software, APCON provides next-generation security products for fast threat detection and reliable data flow across complex networks. For over 30 years, we have been trusted by Fortune 100 and mid-size companies in financial services, telecommunications, government, automotive, healthcare, and large AI-powered Data Centers. Our platforms deliver real-time traffic analysis, enhancing performance and protecting against cyberattacks, data breaches, and blind spots. Why APCON? • Join a team of some of the brightest minds in the industry and help shape the future of electronics through collaboration and innovation., • We offer competitive pay and benefits to support you and your family, helping you live your best life. Enjoy work-life balance so you can thrive both personally and professionally. Benefits: • Medical, dental, and vision insurance, • Company-paid short and long-term disability, • Flexible spending accounts, • Generous PTO program, • 401(K) Retirement Savings Plan with company match, • Professional development program, • Collaborative and innovative environment, • On-site exercise facility APCON is an EEO Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Offers are contingent on the successful completion of pre-employment background screenings.

Job Description Traffic Product Regional Sales Manager Applied Concepts, Inc. Immediate Opening – Richardson, Texas To be considered for this job, you must either live in or be willing to relocate within driving distance of Richardson, Texas. If selected for the position, relocation assistance is negotiable for out-of-state candidates. Traffic Product Regional Sales Manager – Job Overview: Applied Concepts has an exciting opportunity at our Richardson R&D facility, where you will be contributing to our Speed Enforcement and Intelligent Traffic Systems product lines. You will help leverage our 48 years of technology expertise in Radar, Lidar, and traffic safety to provide our customers with advanced, connected, real-time information systems that deliver value ranging from optimized traffic patterns to life-saving hazard avoidance. In this role, you will provide technical leadership for product development projects from a software perspective. You will work with a cross-functional team of experts to deliver innovative solutions spanning the entire product development life cycle, from planning and architecture development to production hand-off and continuous improvement activities. You must demonstrate excellent communication skills and be able to thrive in a fast-paced environment where today's collaboration and innovation drive tomorrow's successes. The compensation for this position is a combination of base salary, commissions, and bonuses. Base salary of $75,000 plus uncapped commissions on product sales in your assigned region. At quota, your total earnings will be between $150,000 and $160,000. Traffic Product Regional Sales Manager – What You'll Gain: • Competitive compensation and benefits, • Rewards and recognition programs, • Protected/assigned territory, • Immersive learning and development opportunities, • Extensive product training, • Convenient office location, • Flexible vacation policy, • Excellent work/life balance, • Great culture and collaborative environment Traffic Product Regional Sales Manager – How You'll Make an Impact: • Work alongside with inside sales partner for sales strategy in regions., • Call on and visit customer base throughout the US in a specific region., • Attend trade shows as needed., • Work with specific customer base developing relationships and keeping customers informed of current product lines., • Stay technically abreast of emerging technologies, techniques, and methodologies to support an inventive environment., • Use customer input for any new or modified current products that we may be adle to develop., • Update Product Management of customer request for new or modified products., • Provide technical input to the Product Management team. Traffic Product Regional Sales Manager – What You'll Need to Succeed: • A 4-year bachelor's degree or equivalent., • A minimum of 3 years of recent experience in the Traffic/Public Works market, or sales experience selling to Government agencies specifically Public Works and traffic management departments., • Proficient with Microsoft suite of products., • Hands-on knowledge of traffic safety products. Who We Are: Applied Concepts is a 48-year-old, 250-person privately owned company, located in Richardson, Texas. Founded in 1977 by an electrical engineer, we have a long history of profitable, organic growth. Our company remains entrepreneurial at heart, constantly re-inventing ourselves with new products and new markets, but still balanced with business prudence. We manufacture our own products, in our own facilities. Integrating our product development with our own manufacturing resources is a key part of our business culture, keeping us nimble and able to provide high quality products. What We Do: We focus on designing, manufacturing, and selling products that promote public safety. We are the number one supplier of speed enforcement products to law enforcement in the United States. Our employees take pride in the quality of our products and the service we provide in keeping our streets and neighborhoods safe. We offer a variety of sales challenges, from microwave to high-speed lasers, to image capturing and processing, and LED speed calming devices. To learn more about us and apply for the position, please visit: We are looking for full-time employees. U.S. Citizenship or U.S. Permanent Resident (Green Card) required. Sorry, NO Sponsorship for U.S. visas (no H-1B, etc.). We use E-Verify to confirm eligibility for all new hires. Only qualified candidates selected for an interview will be contacted.

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a Senior Controls Engineer for our client in the Engineering Solutions domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Permanent position, and the client is looking for someone to start immediately. Duration: Full-time Location: Addison, TX Salary: $130,000-$165,000/Annually Role: Senior Controls Engineer Primary Skills: Engineering Role Description: The Senior Controls Engineer must have 10+ years of experience. For this role, you must be a highly skilled and experienced Senior Controls Engineer to join the team. This role requires expertise in implementing automation solutions using PLC, HMI, SCADA, and DCS/Delta V platforms. As a key member of the team, you will work directly with customers, lead engineers, and ensure the successful design, implementation, and commissioning of automation systems. This role requires strong problem-solving skills, technical proficiency, and the ability to foster customer relationships and secure repeat business. Major Responsibilities: • Automation System Design & Implementation: Lead the design, development, and implementation of innovative automation solutions. This includes developing control system architecture, selecting components, detailing schematic diagrams, programming controllers (PLC, DCS/Delta V), and programming HMI/SCADA systems., • Programming & System Development: Implement control systems using programming languages such as Ladder Logic, Sequential Function Chart, Structured Text, and other relevant languages. Knowledge of VBA, .NET, SQL, and Python for HMI/SCADA system development is preferred., • Networking & Protocols: Design and implement industrial networking systems to connect control components and instrumentation using protocols such as Ethernet/IP, ProfNet, and Modbus., • Project Management: Manage large-scale projects (up to $10M), including developing execution plans, budgets, work breakdown structures, scheduling, time tracking, financial tracking, and reporting. Identify and resolve project issues, manage conflicts, and ensure overall project profitability., • Leadership & Mentorship: Serve as a technical lead, guiding engineers and technicians, and providing mentorship to junior staff. You may also act as a Project Manager for smaller projects., • Customer Interaction & Business Development: Work closely with customers to identify requirements, develop specifications, and deliver solutions. Secure repeat business by maintaining strong customer relationships. Minimum Requirements: Education: • Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, Computer Science, or equivalent experience. Experience: • Over 8 years of experience with automation systems and platforms, including:, • In-depth knowledge of Emerson DeltaV platform, • Experience with PLC-5 to ControlLogix conversions, • Expertise in PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon, • Strong understanding of HMI/SCADA platforms (e.g., Rockwell FactoryTalk, Aveva System Platform, Ignition, Siemens WinCC), • In-depth knowledge of DCS systems, particularly Emerson DeltaV, • Project management experience; PMP certification is a plus, • Familiarity with Batch/Recipes, OEE, MES, and ERP systems, • Experience with electrical schematics, power distribution, control panels (up to 480VAC), and NEC standards, • Experience with AutoCAD is preferred, • Proven ability to lead and mentor a team of engineers/technicians, • Professional references from a subordinate, peer, and manager, • Ability to travel up to 25% Preferred Experience: • Experience in industries such as Semiconductor, Life Sciences, Building Automation, Food & Beverage, Water Treatment, and general manufacturing. Physical Demands of the Position: • Ability to see, perceive colors, hear, speak clearly, and have manual dexterity., • Ability to drive, lift objects, mount/dismount equipment, and perform pushing/pulling tasks as needed. Working Environment: Standard office environment with occasional travel to on-site locations and diverse industrial environments. Frequent use of computers, phones, and office equipment. Education: Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, Computer Science, or equivalent experience Experience: Minimum 10+ years of experience Relocation: This position will cover relocation expenses Travel: 25% travel Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Devyanshu Pawar Recruiter Phone: 412-490-7931 Benefits: This is a direct hire position, and the hired applicant will receive our client’s benefits package. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Employment Details: • Recognized Civil Infrastructure Consulting firm in the US & Canada, • 100% employee owned, • Full Benefits: Health, Vision, Dental, and 401K match, • Sign on bonus opporunity, • Conduct Electrical engineering services and consulting on low to medium voltage power in Industrial and Municipal facilities, • Responsible for the planing, design management, project management and design management for low to medium voltage systems, • Prepare reports, develop plans, develop P&IDs and specifications for municipal clients, • Bachelor’s degree in Electrical Engineering, • Registration as a Professional Engineer, • 10 - 15 years of experience designing and developing Power Distribution diagrams for low to medium voltage industrial or municipal systems, • Strong experience with design management and project management of Power and Control system projects, • Experience with voltage drop, harmonic distortion, and short circuit currents on small to large scale facilities, • Master’s degree in Electrical / I&C Engineering (+)

Job Description Mission of the Role The mission of this role is to drive Hartfiel sales associated with automated equipment and machine control. Acting as a specialist in motion control, this role would focus on complete or partial machine controls and be responsible for sales, program management, and implementation of automated controls systems. Education/Experience Bachelor’s degree from a technical field of study preferred (Mechanical or Electrical Engineering, Physics, or Computer Engineering). Required is a thorough understanding of industrial controls systems including servo motors, induction motors, servo drives, motion controllers, PLCs and HMIs. In addition, knowledge of industrial communication protocols is needed, such as Ethernet I/P, CanOpen, Devicenet, Ethercat, etc. Experience with ladder logic, structured text, and other standard programming languages is preferred. Strong time management and experience in high value technical sales is also strongly preferred. Key System Sales Engineer Accountabilities · Lead sales efforts in the field of electrical controls. Identifying large potential customers and drive effort to gain access into these accounts. This includes monitoring and maintaining current funnel opportunities. · Responsible for developing and presenting customer specific demos and presentations. · Works with customers and outside sales engineers to specify complete control systems. This includes selecting controls package (industrial PC, PLC, Motion Control, HMI), motor sizing and selection, drives sizing and selection, I/O system creation and specification, and selecting and specifying mechanical components (actuators, gearboxes, etc.). · Work with sales teams to present quotes to meet customer specifications · Manages development projects for large opportunities. This includes developing SOW (Scope of Work) documentation, constructing quotes, negotiating details and project schedules, and providing communication with management, internal colleagues and key vendors on the project schedules. Larger projects require prioritization, communication with the customer on required information and project status, and the ability to leverage vendor or other external resources when necessary. · Throughout installation of equipment, this role will support the Sales Engineering team by managing customer expectations. · Ability to attend in-depth (up to 1 week per month) training at vendor facilities. · Potential travel up to 50% · Other miscellaneous duties as assigned by supervisor. · Follows all quality processes and procedures as established by Hartfiel Automation. · Operates within the intended framework of Hartfiel Automation’s mission, values, and vision statements.

Job DescriptionWGNSTAR is a dynamic and growing company with a global footprint. Primarily focused on the semiconductor industry, we provide a platform for you to expand your career with knowledge gained on-the-job training, and tailored development. We know we need talented people like you who hold similar values, which is why we do not put limits on learning, development, industry, and personal growth. Start your path to a WGNSTAR career today! Title: Field Service Engineer - Entry-Level. On-the-job training will be provided! Schedule: M-F Days Pay Rate: $26.00/hr - $37.00/hr DOE. Location: Dallas, TX area Travel: 60%-80% domestic or occasional international travel. The estimated percentage of travel is subject to customer's business needs and requirements. Position Type: Full Time Benefits: This position is eligible for WGNSTAR’s full benefits package, including Medical, Dental, Vision, and 401(k). Additional benefits are listed at the end of this posting. Job Duties: Become part of a team that performs OEM semiconductor equipment installation for start-up services. There are several locations for a particular home base with start-up demands, and the job will require travel. Training will be provided for the proper installation of the OEM equipment. • Performs on-site service, installation, and repair of semiconductor processing equipment, • Troubleshoot equipment problems., • Utilizes electromechanical skills to provide excellent service to customers., • Participates in site safety programs to create a zero-hazard environment., • Demonstrates ability to understand detailed electrical schematics and mechanical drawings., • Understands and adheres to all site fab protocol requirements., • Comprehends test equipment including various test meters, hand and power tools., • Ability to work well with other team members., • Demonstrated teamwork and strong partnership within Equipment Maintenance Team with superb functional teamwork., • Inclined to both mentor new Technicians and openly learn from experienced colleagues., • Values other points of view (including Management, Operations, Engineering, Factory Business Control, Fab IT Systems, and Clean Room Facilities teams)., • Strong ability to work collaboratively and cooperatively with others to deliver quality repairs on a daily basis., • Proficiency in basic computer skills (MS Office Suite)., • English communication skills, both written and verbal., • Hands-on skills and knowledge in mechanics and electronics., • Ability to use hand tools, meters, and read/interpret electrical and mechanical drawings and schematics., • Desire to learn new hands-on skills, work in a team and become familiar with a fab/clean room environment if not already. Additional Benefits: Paid Vacation, Select Holidays, Overtime Opportunities, On-site Facilities & Career Development Opportunities. The people who thrive most at WGNSTAR are those individuals who perform well in a team environment, enjoy interacting and engaging with several different stakeholders, and adapt quickly to changing environments, while leveraging their skills, quality, and knowledge to drive themselves and their teams towards continuous improvement and success. This job description is intended to convey information essential to understanding the scope of the job and the general nature and level of work performed by job holders within this job. This job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities or working conditions associated with the position. This position is not eligible for visa sponsorship. Equal opportunities and Social Governance WGNSTAR is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. WGNSTAR places an immense emphasis on equal employment, encourages diversity in the workplace, and applies an open-door policy for inclusion of all employees. Our diversity program encourages people from any gender, background, ethnicity, culture, education, and experience to join the company and more importantly build a career through employee development. Through our Global wellness programs, WGNSTAR ensures our employees and families have access to a full range of wellness services through our Employee Assistance Program (EAP). In the communities that surround our business operations, we support individual and group sponsorships for local sports and those that are vulnerable in society. Powered by JazzHR tSkshN1nTk

Job Description Senior Electrical Engineer | Mission Critical HED is looking to add an experienced team member to our group of talented Electrical Engineers. The candidate should have broad electrical engineer expertise, with a focus on mission critical projects. Primary responsibilities will include providing for the design and technical systems for large, complex projects from schematics through construction administration. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Typical Duties • Responsible for building system concepts and documentation process from schematics through construction administration phases within the discipline., • It is expected that the engineer will be in regular coordination with Supervisor in project development and performance., • Electrical Engineer shall have a proficient knowledge of primary sectors of design including:, • Power Distribution, • Lighting and Controls, • Fire Alarm, • Specification writing and editing., • Energy conservation and sustainability/report technical writing., • Function as Project Discipline Team Leader on large, complex projects when assigned., • Responsible for directing and overseeing project team members within their own discipline. Level 4 is responsible for monitoring and executing team compliance with project budget., • Prepare and monitor project status reports., • Coordinate with Electrical Engineering Discipline Leader in preparing project Man-hour Estimates., • Prepare and document required code research for project., • Participate in the development of the project cost model and design to it., • Develop and maintain Electrical Basis of Design Journal throughout the life of the project., • Conduct material and product research as required for project development., • Attend project meetings as necessary., • Interface with other Project Discipline Team Leaders., • Respond to client questions/requests within 24 hours., • Document interpretation and submittal reviews during bidding and construction administration., • Monitor and mentor staff to produce quality architectural and engineering services within a project team concept., • Mentor support engineers to help prepare them for greater project responsibilities., • Provide regular feedback to the Electrical Engineering Discipline Leader on performance of support engineers., • Identify opportunities to improve quality, services, and participate in the implementation., • Participate in in-house training activities., • Participate in related professional organizations and activities., • Contribute to department discussions on field feedback, lessons learned, new technology or developments encountered., • Bachelor's degree and licensure required., • LEED Accredited preferred., • Minimum six years' experience in A/E industry preferred., • Extensive knowledge of all aspects of professional services from schematic design through project close-out, including design and technical expertise., • A comprehensive understanding of the coordination aspects and related requirements of all design disciplines., • Proficiency in short-circuit and selective coordination calculation. Utilization of EDSA, SKM or other analytical modeling software preferred., • Excellent written/ verbal communication and strong organizational skills., • Possess the ability to motivate, mentor staff, and delegate work assignments., • Computer and CADD/BIM literate., • Very detail-oriented, self-motivated, enthusiastic and flexible., • Capable of traveling to and from project sites for attending client, project and construction meetings., • Ability to access existing and new project sites for observation, investigation and evaluation purposes., • Ability to use equipment for communication and documentation purposes., • Visual acuity to perform responsibilities. #LI-DD1

Job Description Location: San Antonio, Dallas, Austin, and Houston, Texas Job Type: Full-time Job Summary: Our client, a leading MEP consulting firm with multiple locations in Texas, is seeking a Licensed Electrical Engineer to join their dynamic team. The ideal candidate will have 5+ years of experience in electrical building design, strong Revit skills, and a passion for innovative and efficient design solutions. This role offers the opportunity to work on diverse projects across commercial, healthcare, institutional, and mixed-use sectors while collaborating with a multidisciplinary team of professionals. Key Responsibilities: • Design and engineer electrical systems for commercial and institutional buildings, including power distribution, lighting, and fire alarm systems., • Utilize Revit for electrical design, coordination, and documentation., • Perform load calculations, short circuit analysis, and other engineering assessments., • Collaborate with mechanical, plumbing, and structural engineers to ensure seamless integration of building systems., • Prepare and review construction documents, technical specifications, and reports., • Coordinate with clients, contractors, and local municipalities to ensure compliance with codes and project requirements., • Provide mentorship to junior engineers and contribute to team development. Qualifications: • Professional Engineer (PE) license required (State of Texas preferred)., • Minimum of 5 years of experience in electrical engineering for building design., • Proficiency in Revit and AutoCAD for MEP design., • Strong understanding of NEC codes, local building codes, and energy efficiency standards., • Experience with power distribution, lighting control systems, and fire alarm design., • Excellent problem-solving skills and the ability to work on multiple projects simultaneously., • Strong communication skills to interact with clients and project stakeholders. Benefits: • Competitive salary and performance-based bonuses., • Comprehensive health, dental, and vision insurance., • 401(k) retirement plan with company match., • Professional development support, including PE license renewal and continued education., • Hybrid work flexibility (location-dependent).

Job Description Camelot Services, Inc. is an established leader in the Facility Management and Maintenance Industry servicing corporate owners and users of real estate. Camelot services Fortune 500 clients as well as emerging businesses and supports clients’ properties across the United States and Canada. Apply today and join the Camelot Team! Camelot is looking for a Building Engineer to add to our team! Shift: All Shifts ESSENTIAL JOB DUTIES • Responsible for preventive maintenance, necessary maintenance, and repairs to the buildings mechanical, electrical, HVAC and plumbing systems. Must be familiar with the location and have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, fire protection and security systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary., • Conducts periodic general preventive maintenance on mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts, and periodic testing of equipment. Systems include, but not limited to; air handling units (including both rooftop and built-up units), re-circulating air systems, water pumping systems, cooling plant and plumbing system components. Also conducts general building maintenance, as needed., • Be responsive to tenant requests in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., • Prepare and maintain maintenance logs and records. Familiarity with preventative maintenance and work order software systems., • Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor. Maintains log of work order details., • Perform all assigned work so as to ensure the safety of the building’s tenants and the continuous operation of the site., • Be familiar with and conform to all written operating procedures associated with site., • Assist in snow and ice clearing operations, including the coordination of plowing and salting activities by outside vendors. If applicable, • Strong knowledge of Building Automation Systems / Programming., • Interface and work with others throughout the company., • Proficiently using test equipment and devices pertinent to building operating systems and analyzing test results., • High School Diploma required, • Journeyman Electrician License preferred, • Minimum of 5 plus years previous building operations engineering experience., • Working knowledge of HVAC, Electrical, and Plumbing systems., • A solid safety record in past work history and training in safe work practices, • Ability to handle multiple projects and make decisions., • General computer knowledge and skills such as Microsoft Office and CMMS systems., • Holds any necessary / required licenses, CFC certification is desired., • Must be able to climb / stand on ladders while performing repairs or using various tools, • Must be able to bend at the knees / practice safe lifting standards often throughout the day, • Must typically need to be able to lift up to 75 lbs independently Company DescriptionCamelot Services, Inc. incorporated in 2000 for the purpose of providing high quality, professional, property and facilities management to clients who want customized, cost-effective service. Headquartered in Plano, TX, Camelot has representation across the nation and has provided consultation services on an International level. Camelot Services, Inc. is an equal employment opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, national origin, marital status, disability, sexual orientation, protected military/veteran status, or any other protected factor.Camelot Services, Inc. incorporated in 2000 for the purpose of providing high quality, professional, property and facilities management to clients who want customized, cost-effective service. Headquartered in Plano, TX, Camelot has representation across the nation and has provided consultation services on an International level.\r\n\r\nCamelot Services, Inc. is an equal employment opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, national origin, marital status, disability, sexual orientation, protected military/veteran status, or any other protected factor.

Job DescriptionAbout Us Sol-Ark is a Veteran-owned solar and battery-based technology manufacturer based in Texas. Our mission is making the most reliable, innovative, and affordable solar storage solutions to power families & their businesses. Founded in 2013, the company has experienced massive, organic growth due to our equipment being 3x more powerful and capable than best-in-class alternatives. It is a fast-paced, yet casual work environment. We are a close-knit team looking to make significant contributions to a very fast-growing industry that values merit, character, aptitude, sustainability and self-reliance. Job Description Location: This position will be onsite at our corporate offices in Allen, TX (Dallas-Fort Worth area). Full-time W-2 ONSITE opportunity (not remote)! Work Eligibility: • Candidates must be legally authorized to work in the United States without requiring employer-sponsored visa sponsorship now or in the future. Responsibilities: • Support for Technical Sales: Assist sales/FAE teams with technical questions, site assessments, and system design in large projects., • System Design and Engineering: Support EPC contractors in designing and engineering commercial and industrial solar systems, ensuring compliance with industry standards and regulations., • Product Development: Collaborate with product and R&D teams to develop and improve solar products and services., • Product Test: Conduct a variety of tests of HV inverters, BESS, and produce detailed reports., • Training and Education: Provide training and education to application engineering, technical support, sales/FAE teams, customers, and partners on solar products and technologies., • Industry Research: Stay current with industry trends, technologies, and regulations, applying this knowledge to improve business operations., • Market knowledge: Ideal candidate shall have an in depth understanding of emerging application areas to apply renewable energy., • Customer Support: Assist the technical support team in addressing complex customer inquiries and resolving technical issues., • Collaboration: Work with cross-functional teams, including sales, marketing, and operations, to drive business growth., • Codes and Regulatory: Stay updated on codes and regulatory changes to advise the company on compliance and business opportunities., • Thought Leadership: Represent the company as a solar expert, presenting at industry events and contributing to industry publications. Requirements Qualifications: • Bachelor's degree in electrical engineering with a focus on power systems or power electronics from an accredited university., • 5+ years of experience in commercial and/or residential solar energy combined., • Minimum of 2 years of experience in the testing and product support of solar and/or energy storage technologies., • Familiarity with evaluating products for compliance with UL 1741, IEEE 1547, UL 9540, UL 9540A and including NEC Knowledge., • Strong understanding of Modbus RTU and Canbus protocol is highly preferable., • Preferred industry-recognized certifications (e.g. NABCEP)., • Strong technical knowledge of solar systems, design, and installation., • Excellent communication, training, and presentation skills., • Ability to work in a fast-paced environment and adapt to changing industry conditions. Benefits Salary and Benefits: We offer a competitive salary and performance-based bonus program, top-tier benefits package, including medical, dental, and vision insurance, 401(k), and paid time off.

Job DescriptionDescription: Job Purpose The Electrical Engineer will have overall responsibilities for the electrical design on a project. The position will collaborate and direct other electrical staff during the design and documentation of the electrical system. The position will coordinate the electrical design with all other disciplines so that the design is completely coordinated internally as well as with external clients. Duties and Responsibilities The primary duties and responsibilities of this position include the following: • Prepare design documents appropriate for the project and in accordance with company standards., • Monitor project status and development to meet project deadlines, • Coordinate the completion of the documents in the appropriate time to have a QA/QC review completed prior to the deadline for the project, • Coordinate staffing manpower needs weekly with the Project Manager, • Review the electrical budget hours and coordinate any recommended adjustments with the Project Manager, • Work with team electrical staff to identify tasks and assign staffing to complete the electrical design Beyond any specific outside education classes taken to maintain professional registration, 10 hours of company continuing education shall be required. This would include attending and participating in company discipline training sessions or appropriate approved outside training classes. Although attending vendor classes is encouraged to keep up with technology, this will not count toward the 10 hours of in-house training. Working Conditions This position requires night and weekend work at times to complete projects to meet deadlines. Direct Reports None Requirements: Qualifications The following qualifications are requirements of the position: • Registered Professional Engineer, • Ability to meet and socialize with clients to foster future repeat work, • Able to work well and communicate with other disciplines within the firm as well as other consultants on the project., • Excellent interpersonal and communication skills The ability to carry up to 50 lbs of drawings and carry and/or climb ladders is a requirement of the position.

Job Description Associate Sales Engineer – Power Solutions (Plano, TX) Entry-Level | Electrical Engineering | Technical Sales Launch your career in technical sales! Vic Myers Associates (VMA) is hiring a recent Electrical Engineering graduate to represent our industry-leading power solutions (backup power, UPS, surge, power distribution) across the Vic Myers Associates territory. What you'll do: • Train with senior engineers and power specialists., • Meet customers and solve real-world power challenges., • Travel across the region to grow accounts., • B.S. in Electrical Engineering (or related field, recent grad)., • Strong communicator, eager to learn sales., • Hungry, motivated, and excited to grow., • Base + commission compensation., • Career path in technical sales., • Hands-on mentorship and training., • Team culture built on trust, empowerment, and growth.

If you are a Electrical Engineer looking to enjoy a promising work life balance, then please read on. Bachelor of Science in Electrical Engineering (or higher). Based in the Dallas area, we are a well known, fast growing MEP (Mechanical, Electrical and Plumbing) Firm.

Bachelor's Degree Preferred in Electronics, Software Engineering Communication, Computer Network Engineering, Computer Science, Electrical Engineering or Telecommunications. Korean Bilingual Entry Level Mobile Network Engineer. Network Engineers will work with testing mobile phones that has the late

This position is for a Senior Electrical Engineer with circuit card assembly (CCA) design and leadership experience. This opportunity is targeted toward engineers who enjoy working in a systems environment as it includes electrical and mechanical design elements, as well as interacting with mechanic

This position is for an experienced Electrical Design Engineer with emphasis on PCB and system-level design incorporating analog and digital functions. The ability to conduct successful design reviews, develop and adhere to design processes and effectively document design approaches is essential. Op

Applicants for positions with Henderson Engineers/Henderson Building Solutions must be legally authorized to work in the United States, and verification of eligibility will be required at the time of commencement of employment. NOTICE TO CANDIDATES: RECRUITMENT FRAUD ALERT Henderson representatives

Keeps equipment operational by following manufacturer's instructions and established procedures; requesting repair service. Electrical Engineer Job Duties: Evaluates electrical systems, products, com

Are you ready to unleash your technical creativity? Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination! Electrical engineers at Sierra Nevada Corporation research, design, develop, test, certify, deploy and improve cutting edge products