Trabajos electrician en Fresno, CaliforniaCrear alertas

Job Description Journeyman Electrician — Commercial Direct Hire | Greater Bay Area, CA | $50.00 – $65.00 per hour | Full-Time THE OPPORTUNITY Our client is a well-established, non-union (merit shop) commercial and industrial electrical contractor operating throughout Northern California since 1998. They self-perform work across the Greater Bay Area, Central Valley, and Sacramento region, and are recognized for a strong safety culture, including platinum-level safety accreditation and a long track record of repeat work with major general contractors. This is a direct-hire, full-time position with the client — not a temporary or contract assignment. They are currently seeking certified Journeyman Electricians with at least 4+ years of experience for commercial project work. THE WORK This role performs commercial electrical scope, including: • Commercial tenant improvement (TI) build-outs, • Lighting, lighting controls, receptacles, and switching, • Power distribution and panel work, • New electrical services and service upgrades, • Underground and above-grade conduit, • Office, retail, hospitality, healthcare, and multi-family project types JOB DUTIES • Prepare work areas for installation of equipment, • Install electrical components, or assist in their installation, • Connect wiring and equipment per code and job specification, • Read blueprints and electrical drawings and install as specified, • Verify dimensions, alignments, and clearances per drawings or plans, • Set up and operate tools such as hydraulic benders, power threaders, power pullers, and cable vacuum systems, • Operate equipment only if trained and certified to do so — including powder-actuated tools, JLG lifts, and other operations requiring certification, • Troubleshoot electrical issues and provide technical guidance, • Perform all tasks in a professional manner, • Secure and lock up equipment after use, and keep work areas clean QUALIFICATIONS & PREFERRED CERTIFICATIONS • Minimum 4+ years of electrical experience, • Certified Journeyman Electrician, • Commercial tenant improvement experience preferred, • Proficient in all types of electrical installations and wiring methods, • California ET Card preferred, • OSHA 10 or OSHA 30 certification preferred, • Lift certifications preferred, • Valid driver's license and clean DMV record, • Must pass drug and alcohol pre-screening PHYSICAL REQUIREMENTS • Climbing ladders and steep stairs, • Crawling, standing, stooping, bending, crouching, kneeling, sitting, and reaching, • Routinely lifting objects in excess of 50 pounds; pushing and pulling of objects required, • Repetitive use of arms, hands, and fingers, • Wearing all personal protective equipment — hard hat, safety glasses, gloves, safety vest — at all times, • Physical work is a primary part (more than 70%) of the job, • Working in all elements depending on job location and time of year — heat, cold, rain, • Able to work 8 hours per day, 40 hours per week, plus overtime as required and night shifts, • Willing to travel within 100 miles of the Brentwood, CA area COMPENSATION & BENEFITS $50.00 – $65.00 per hour, depending on experience. • Medical, dental, and vision coverage, • 401(k) with company match, • Paid vacation and holidays, • Annual bonus, • Tuition reimbursement, • Employee referral bonus program WORK LOCATION On the road — jobsite based. Travel within approximately 100 miles of Brentwood, CA (up to 75% preferred). Innovation Consulting LLC 8200 Stockdale Hwy., Ste M10-256, Bakersfield, CA 93311 | Toll Free: 866-865-0999 | Office: 661-525-5751 https://www.innovationconsulting.biz | Certified LGBTBE, SBE, EBE, VSBE

Job Description Overview Function as a Journeyman for Bergelectric Corp.; installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential locations. This is considered to be a safety sensitive position. Responsibilities • Install, repair, maintain, and test commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives., • Use industry related hand tools and power tools., • Measure, cut, bend, thread, etc. and install wire and electrical cable systems, conduit systems and other wire raceway systems., • Feed to, pull into, and terminate wire and cable within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc., • Splice and terminate wires at junction points., • Troubleshoot equipment electrical systems and control circuits and build control panels from drawings., • Prepare sketches and schematic diagrams showing the location of wiring and electrical systems., • Delegate tasks and assist with training other employees., • Communicate effectively with Foremen and crew members., • Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met., • Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors., • Adhere to all Bergelectric Corp.’s safety policies and procedures. Qualifications • Must hold a current Journeyman Wireman license (if required by the applicable state, city or county)., • Ability to install power systems: lighting, fire protection, security, and data network., • Ability to build and install control panels and provide maintenance to systems., • Experience using Electrical Single Line blueprints., • Experience finding and repairing faults in electrical apparatus and circuits., • Ability to verify compliance and functionality of installations., • Experience helping with the management of a project and crew., • Ability to manage material estimates., • Demonstrate strong leadership and pre-planning abilities.

Job Description Sebastian is a premier provider of communications and construction services in California. With more than 70 years of experience, Sebastian is passionate about providing people with a great place to work. Our high growth and dynamic model offers employees the opportunity for career advancement. As a family company we value the expertise and experience of our team. Job Description: Journeyman Electrician will work on commercial and industrial construction projects (both private and public works). Electricians must be able to work in fast-paced environments while maintaining the accuracy and quality of their work. This position requires high technical expertise and attention to detail. Our work ranges from North Sacramento to the East Bay down into the Central Valley. Job Duties and Responsibilities: • Supervising subcontractors, apprentices, material handlers, • Planning and laying out jobs, • Providing project foremen with daily job performance updates, • Cutting, bending, threading and running electrical conduit materials, • Pulling electrical wiring through electrical conduit, • Terminating electrical panels, set fixtures, outlets and various electrical devices, • Install/connect wires to circuit breakers transformers, outlets or other components/systems, • Maintaining good working relationships with customers, • Monitoring safety in the field;, • Conducting regular safety meetings, • Completing regular reports and paperwork, • Handling claims and change orders, • Estimating time and scheduling Job Requirements: • Electricians must provide proof of CA Journeyman Electrician certification., • Proficient knowledge of electrical theory, the National Electrical Code, and local and state electric/ building codes required., • Electricians must have a clear understanding of lockout and tagout., • OSHA 10, scissor lift, reach lift, CPR, and first aid training is preferred., • Ability to visualize work, • Must be able to climb ladders, sit, bend, stoop, stand or walk for extended periods., • Must have minimal ability to squat, bend, kneel, twist, crawl, reach lift, balance, carry, push, and pull, • Must be able to lift up to 100 lbs., • Must be able to travel to job site locations, • Ability to work in extreme weather and temperature conditions. Compliance: • If you need an accommodation as part of the employment process, please contact Human Resources., • Equal Opportunity Employer, including disabled and veterans., • If you want to view the Pay Transparency Policy Statement, please click the link: English

Job Description Electrical Foreman — Commercial Direct Hire | Greater Bay Area, CA | $55.00 – $73.68 per hour | Full-Time THE OPPORTUNITY Our client is a well-established, non-union (merit shop) commercial and industrial electrical contractor operating throughout Northern California since 1998. They self-perform work across the Greater Bay Area, Central Valley, and Sacramento region, and are recognized for a strong safety culture, including platinum-level safety accreditation and a long track record of repeat work with major general contractors. This is a direct-hire, full-time position with the client — not a temporary or contract assignment. They are seeking an experienced Electrical Foreman to lead and supervise crews on commercial projects. If you can run work, keep crews productive, hold schedule, and deliver quality installs safely, they want to talk now. THE WORK This role runs commercial electrical scope, including: • Commercial tenant improvement (TI) build-outs, • Lighting, lighting controls, receptacles, and switching, • Power distribution and panel work, • New electrical services and service upgrades, • Underground and above-grade conduit, • Office, retail, hospitality, healthcare, and multi-family project types Projects are concentrated across the Greater Bay Area with additional work in the Central Valley and Sacramento region. RESPONSIBILITIES • Supervise and lead electricians and apprentices on job sites, • Manage electrical scope including installation, repair, and inspection, • Read and interpret blueprints, schematics, and electrical drawings, • Verify dimensions, alignments, and clearances per drawings or plans, • Prepare and lay out electrical systems, including wiring diagrams, conduit routing, and panel locations, • Plan and run daily work — assign tasks, manage schedule and crew productivity, • Ensure all work meets NEC, local codes, and company standards, • Coordinate with project managers, project engineers, inspectors, and other trades, • Monitor productivity, material usage, and job progress, • Enforce jobsite safety policies and conduct weekly safety meetings, • Troubleshoot electrical issues and provide technical guidance, • Install or assist in installing electrical components, • Maintain accurate daily reports, timecards, and material lists, • Set up and operate hydraulic benders, power threaders, power pullers, and cable vacuum systems, • Train and mentor crew members, • Secure equipment after use and keep work areas clean QUALIFICATIONS • Minimum 5+ years of electrical experience; foreman or lead experience preferred, • Journeyman Electrician license preferred (Master a plus), • Experience on commercial tenant improvement and ground-up commercial projects preferred, • Strong knowledge of electrical systems, the National Electrical Code, and safety regulations, • Strong leadership and jobsite management skills; able to manage crews and multi-task effectively, • Excellent communication skills, • Proficient in all types of electrical installations and wiring methods, • Comfortable working from ladders, lifts, and in varying jobsite conditions, • Experience with scheduling, estimating, and material ordering, • OSHA 10 or OSHA 30 certification a plus, • California ET Card a plus, • Valid driver's license and clean DMV record, • Must pass drug and alcohol pre-screening PHYSICAL REQUIREMENTS • Climbing ladders and steep stairs, • Crawling, standing, stooping, bending, crouching, kneeling, sitting, and reaching, • Routinely lifting objects in excess of 50 pounds; pushing and pulling of objects required, • Repetitive use of arms, hands, and fingers, • Wearing all personal protective equipment — hard hat, safety glasses, gloves, safety vest — at all times, • Physical work is a primary part (more than 70%) of the job, • Working in all elements depending on job location and time of year — heat, cold, rain, • Able to work 8 hours per day, 40 hours per week, plus overtime as required and night shifts, • Willing to travel within 100 miles of the Brentwood, CA area COMPENSATION & BENEFITS $55.00 – $73.68 per hour, depending on experience. • Medical, dental, and vision coverage, • 401(k) with company match, • Paid time off and holidays, • Tuition reimbursement, • Employee referral program, • Company vehicle provided at the foreman level WORK LOCATION On the road — jobsite based. Travel within approximately 100 miles of Brentwood, CA. Innovation Consulting LLC 8200 Stockdale Hwy., Ste M10-256, Bakersfield, CA 93311 | Toll Free: 866-865-0999 | Office: 661-525-5751 https://www.innovationconsulting.biz | Certified LGBTBE, SBE, EBE, VSBE

Job Description Journeyman Electrician — Industrial Direct Hire | Central Valley & Greater Bay Area, CA | $50.00 – $65.00 per hour | Full-Time THE OPPORTUNITY Our client is a well-established, non-union (merit shop) commercial and industrial electrical contractor operating throughout Northern California since 1998. They self-perform work across the Greater Bay Area, Central Valley, and Sacramento region, and are recognized for a strong safety culture, including platinum-level safety accreditation and a long track record of repeat work with major general contractors. This is a direct-hire, full-time position with the client — not a temporary or contract assignment. They are currently seeking certified Journeyman Electricians with at least 4+ years of experience for industrial project work. THE WORK This role performs industrial electrical scope, including: • Rigid conduit — cut and thread, heavy raceway installation, • Explosion-proof and classified (hazardous location) installations, • Food and beverage processing facilities — dairy, edible oil, and protein processing plants, • Cold storage and industrial refrigeration facilities, • Large distribution and fulfillment center electrical, • Power distribution, equipment connections, motor and control wiring JOB DUTIES • Prepare work areas for installation of equipment, • Install electrical components, or assist in their installation, • Connect wiring and equipment per code and job specification, • Read blueprints and electrical drawings and install as specified, • Verify dimensions, alignments, and clearances per drawings or plans, • Set up and operate tools such as hydraulic benders, power threaders, power pullers, and cable vacuum systems, • Operate equipment only if trained and certified to do so — including powder-actuated tools, JLG lifts, and other operations requiring certification, • Troubleshoot electrical issues and provide technical guidance, • Perform all tasks in a professional manner, • Secure and lock up equipment after use, and keep work areas clean QUALIFICATIONS & PREFERRED CERTIFICATIONS • Minimum 4+ years of electrical experience, • Certified Journeyman Electrician, • Industrial experience preferred — rigid pipe, cut and thread, and classified/explosion-proof work, • Proficient in all types of electrical installations and wiring methods, • California ET Card preferred, • OSHA 10 or OSHA 30 certification preferred, • Lift certifications preferred, • Valid driver's license and clean DMV record, • Must pass drug and alcohol pre-screening PHYSICAL REQUIREMENTS • Climbing ladders and steep stairs, • Crawling, standing, stooping, bending, crouching, kneeling, sitting, and reaching, • Routinely lifting objects in excess of 50 pounds; pushing and pulling of objects required, • Repetitive use of arms, hands, and fingers, • Wearing all personal protective equipment — hard hat, safety glasses, gloves, safety vest — at all times, • Physical work is a primary part (more than 70%) of the job, • Working in all elements depending on job location and time of year — heat, cold, rain, • Able to work 8 hours per day, 40 hours per week, plus overtime as required and night shifts, • Willing to travel within 100 miles of the Brentwood, CA area COMPENSATION & BENEFITS $50.00 – $65.00 per hour, depending on experience. Top of range is reserved for electricians with strong classified and heavy rigid experience. • Medical, dental, and vision coverage, • 401(k) with company match, • Paid vacation and holidays, • Annual bonus, • Tuition reimbursement, • Employee referral bonus program WORK LOCATION On the road — jobsite based. Travel within approximately 100 miles of Brentwood, CA (up to 75% preferred). Innovation Consulting LLC 8200 Stockdale Hwy., Ste M10-256, Bakersfield, CA 93311 | Toll Free: 866-865-0999 | Office: 661-525-5751 https://www.innovationconsulting.biz | Certified LGBTBE, SBE, EBE, VSBE

Job Description If you want to be part of something bigger than just a job – make this career move and find exactly what you’re looking for. We keep on growing because we only hire the best, and our customers love us for it. We’ve been at this a long time here in Fresno. You’ve probably seen our trucks and our ads. What you don’t know is what it’s like to be a part of a team like this. How much you feel appreciated when you don’t cut corners. How much we inspire ongoing training and education. How much you can earn when you truly are the best. People often come to us looking for a job. They stay with us because they find a fulfilling career, room to grow, and opportunities to excel. Here at Allbritten, The Barefoot Plumber, you will work in a place where you will be appreciated by your team and customers, and where your work has a direct effect on the success of the company. If this sounds like you, spend a little time learning about Allbritten by visiting Allbritten.com. When you're ready, please follow the directions at Apply Today to apply for this position. In addition to a competitive salary and benefits package, we offer: • A culture that values hard work and reward results, • Medical Insurance -- we pay 65% of you and 70% of your family's insurance premiums for health., • 100% of your Life Insurance premium, • Low-cost dental and vision, • 401k Plan with up to 4% Match, • Paid PTO and paid holidays each year, • Weekly pay, • A family. This is last on the list because it’s most important. We care about our team and expect you to bring that same caring when you join. We do a lot more than just work together. You’ll come to love our company outings, and you’ll build life-long friendships at Allbritten. If you are passionate about helping people improve their homes, have a strong work ethic, and enjoy working both independently and as part of a team, we encourage you to apply. Please note that this role may require working in diverse and potentially uncomfortable indoor and outdoor environments. This is not the right fit for you if you are not looking for a long-term career or are unable to consistently demonstrate an exceptional work ethic, including excellent attendance. We value teamwork and those who enjoy working as part of a team will thrive in this role. JOB SUMMARY Allbritten The Barefoot Plumber is expanding its services and is looking for a motivated and skilled Electrical Sales & Service Technician. This role is ideal for a dynamic individual who combines technical expertise with exceptional customer service and sales abilities. The Electrical Sales & Service Technician will be responsible for diagnosing, repairing, and selling electrical services and products to residential and light commercial customers. DUTIES & RESPONSIBILITIES: • Electrical Service & Repair:, • Perform diagnostics, maintenance, and repairs on electrical systems and components., • Troubleshoot electrical issues and provide efficient, effective solutions., • Install, upgrade, and maintain residential and light commercial electrical systems, including wiring, panels, fixtures, and appliances., • Ensure all work meets or exceeds local electrical codes and safety standards., • Sales & Customer Relations:, • Provide professional, courteous, and knowledgeable service to customers., • Conduct thorough electrical system assessments and present findings to customers., • Recommend and explain electrical products and services to meet customers' needs, promoting additional services and upgrades., • Close sales by building trust and effectively communicating the value and benefits of Allbritten’s services., • Customer Service Excellence:, • Act as a trusted advisor, ensuring customer satisfaction through high-quality service and follow-up., • Address customer concerns promptly and effectively, providing solutions and support., • Maintain strong, positive relationships with customers, fostering repeat business and referrals., • Safety & Compliance:, • Adhere to company safety policies and OSHA regulations at all times., • Ensure the proper use of safety equipment, tools, and procedures., • Maintain a clean and safe work environment, both on-site and in company vehicles., • Technical Expertise & Development:, • Stay updated on industry trends, tools, and techniques to provide the best service possible., • Participate in ongoing training and professional development opportunities provided by the company., • Share knowledge and expertise with team members to promote a culture of continuous improvement., • Administrative Duties:, • Document all work performed, including diagnostics, repairs, and sales, using the company’s service software., • Manage inventory of tools, parts, and supplies, ensuring availability for upcoming jobs., • Collaborate with the Electrical Service Manager to ensure efficient scheduling and job prioritization. REQUIRED SKILLS AND DESIRED SKILLS • Must have own tools., • Comfortable working directly with consumers in their home, • Comprehensive knowledge of electrical systems, wiring, and safety protocols., • Ability to use Company-furnished technology, • Strong interpersonal & communication skills, • Face to face interactive sales experience is ideal, • Can engage with their co-workers and are able to collaborate with their team to achieve goals., • Multi-task oriented., • Experience with Service Titan or other service-based management systems is ideal., • Detailed and Goal orientated with a strong desire to succeed., • Excellent customer service skills, • General construction knowledge., • Electrical Sales EDUCATION & EXPERIENCE • High School Diploma and/or GED certificate; or equivalent; additional technical training or certification is highly desirable., • Minimum of 2-3 years of experience as an electrical service technician., • Valid Driver’s License and must be insurable. PHYSICAL DEMAND: • Push/pull up to 75Lbs., • Ability to kneel for up to 8 hours., • Ability to lift up to 75 Lbs., • Ability to squat consistently., • Ability to consistently twist, stoop, bend/crouch, crawl, and reach., • Ability to sit up to 8 -10 hours., • Ability to stand up to 8 -10 hours, • Repetitive hand, wrists, arm and leg motion PAY SCALE: • $20.00 - $35.00 per hour; with an incentive pay based on individual’s performance up to 18% (calculated by the difference of hourly and incentive pay) WORK ENVIRONMENT: • Field, • Working in private residences as well as some commercial, • Exposure to hazardous conditions, such as high voltage and heights, may occur while performing the duties of this job, the technician will be exposed to:, • Excessive heat/cold, inside/outside work, excessive noise, body mechanic repetitious, work, • Varies weather conditions (wet/dry surfaces), dust/debris, and confining areas of a home for short period of time., • May be exposed to fumes or airborne particles and vibrations., • Occasionally exposed to moving mechanical parts and risk of electrical shocks, • Some products can expose you to chemicals including, but not limited to: Asbestos, Carcinogens, Phosgene Gas, Toxic Substances, which is/are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. WORK SCHEDULE • Mon – Fri.; 7:00am – 5:00PM / Weekends as needed EQUAL OPPORTUNITY EMPLOYMENT STATEMENT Allbritten is an Equal Opportunity Employer (EOE) and is committed to creating a diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability status, protected veteran status, or any other personal characteristic protected by Federal, State, or Local Laws. Powered by JazzHR EMYmxK11qR

Job Description Overview Responsible for monitoring installations ensuring work is performed according to Company standards and the contract; Company’s crews are used efficiently and properly; and work with the foreman in managing portions of the project and employees. Responsible for the following activities: productivity, safety, quality control, scheduling, procurement of materials, and any other activity impacting the successful completion of the project. This is considered to be a safety sensitive position. Responsibilities • Understand your assigned portion of the project thoroughly., • Communicate effectively with foreman and crew., • Be courteous and cordial to our customers., • Assure all work performed meets with all NEC, federal, state, county, and local codes., • Assure the proper materials are on site to perform the required work., • Assure material ordered was received., • Assure productivity by effectively managing your crew and your time., • Establish high performance and quality standards., • Establish project goals and monitor success in reaching those goals on an ongoing basis., • Utilize the Prefab shop to the fullest extent., • Anticipate potential problems and take action before they become real problems., • Be an enthusiastic and motivating leader., • Assure your crew starts on time each day., • Maintain 10-minute rest break and 30-minute lunch break as legally required., • Maintain complete and accurate “as-builts”(on a daily or weekly basis)., • Understand and implement Bergelectric’s Employee Handbook, • Implement Bergelectric’s safety policies and procedures and ensure a safe work environment for all personnel., • Is a team player – a positive, well-organized, proactive force to support profit and growth of the Company. Qualifications • Completion of an electrical construction apprentice program or holder of a valid state electrician license/certification or 4 years field experience as a journeyman electrician, or equivalent combination of education and experience., • Solid understanding of the industry including knowledge of electrical codes and installation methods., • Strong communication skills, including the ability to effectively present information and respond to questions verbally and/or in writing from foreman and crew., • Understanding of the basic laws of electricity and electrical systems, • Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to deal with several abstract and concrete variables in standardized situations. Ability to prioritize, organize, and project future issues. Must be resourceful and have the ability to analyze and resolve problems quickly., • Ability to read technical instructions and interpret electrical drawings., • Ability to do basic mathematics and use of electrical formulas., • Ability to see details and compare details in objects., • Knowledge of and the ability to use industry tools and equipment productively and safely., • Basic mechanical skills, • Ability to visualize and sketch an electrical layout.

Job Description Electrical Foreman — Industrial Direct Hire | Central Valley & Greater Bay Area, CA | $55.00 – $73.68 per hour | Full-Time THE OPPORTUNITY Our client is a well-established, non-union (merit shop) commercial and industrial electrical contractor operating throughout Northern California since 1998. They self-perform work across the Greater Bay Area, Central Valley, and Sacramento region, and are recognized for a strong safety culture, including platinum-level safety accreditation and a long track record of repeat work with major general contractors. This is a direct-hire, full-time position with the client — not a temporary or contract assignment. They are seeking an experienced Electrical Foreman to lead and supervise crews on industrial projects. If you can run work, keep crews productive, hold schedule, and deliver quality installs safely, they want to talk now. THE WORK This role runs industrial electrical scope, including: • Rigid conduit installation — cut and thread, heavy raceway, • Explosion-proof and classified (hazardous location) installations, • Food and beverage processing facilities — dairy, edible oil, and protein processing plants, • Cold storage and industrial refrigeration facilities, • Large distribution and fulfillment center electrical, • Power distribution, equipment connections, motor and control wiring Projects are concentrated in the Central Valley with additional work across the Greater Bay Area and Sacramento region. RESPONSIBILITIES • Supervise and lead electricians and apprentices on job sites, • Manage electrical scope including installation, repair, and inspection, • Read and interpret blueprints, schematics, and electrical drawings, • Verify dimensions, alignments, and clearances per drawings or plans, • Prepare and lay out electrical systems, including wiring diagrams, conduit routing, and panel locations, • Plan and run daily work — assign tasks, manage schedule and crew productivity, • Ensure all work meets NEC, local codes, and company standards, • Coordinate with project managers, project engineers, inspectors, and other trades, • Monitor productivity, material usage, and job progress, • Enforce jobsite safety policies and conduct weekly safety meetings, • Troubleshoot electrical issues and provide technical guidance, • Install or assist in installing electrical components, • Maintain accurate daily reports, timecards, and material lists, • Set up and operate hydraulic benders, power threaders, power pullers, and cable vacuum systems, • Train and mentor crew members, • Secure equipment after use and keep work areas clean QUALIFICATIONS • Minimum 5+ years of electrical experience; foreman or lead experience preferred, • Journeyman Electrician license preferred (Master a plus), • Experience on industrial electrical projects — rigid pipe, cut and thread, and classified/explosion-proof work strongly preferred, • Strong knowledge of electrical systems, the National Electrical Code, and safety regulations, • Strong leadership and jobsite management skills; able to manage crews and multi-task effectively, • Excellent communication skills, • Proficient in all types of electrical installations and wiring methods, • Comfortable working from ladders, lifts, and in varying jobsite conditions, • Experience with scheduling, estimating, and material ordering, • OSHA 10 or OSHA 30 certification a plus, • California ET Card a plus, • Valid driver's license and clean DMV record, • Must pass drug and alcohol pre-screening PHYSICAL REQUIREMENTS • Climbing ladders and steep stairs, • Crawling, standing, stooping, bending, crouching, kneeling, sitting, and reaching, • Routinely lifting objects in excess of 50 pounds; pushing and pulling of objects required, • Repetitive use of arms, hands, and fingers, • Wearing all personal protective equipment — hard hat, safety glasses, gloves, safety vest — at all times, • Physical work is a primary part (more than 70%) of the job, • Working in all elements depending on job location and time of year — heat, cold, rain, • Able to work 8 hours per day, 40 hours per week, plus overtime as required and night shifts, • Willing to travel within 100 miles of the Brentwood, CA area COMPENSATION & BENEFITS $55.00 – $73.68 per hour, depending on experience. Top of range is reserved for foremen with strong classified and heavy rigid experience. • Medical, dental, and vision coverage, • 401(k) with company match, • Paid time off and holidays, • Tuition reimbursement, • Employee referral program, • Company vehicle provided at the foreman level WORK LOCATION On the road — jobsite based. Travel within approximately 100 miles of Brentwood, CA. Innovation Consulting LLC 8200 Stockdale Hwy., Ste M10-256, Bakersfield, CA 93311 | Toll Free: 866-865-0999 | Office: 661-525-5751 https://www.innovationconsulting.biz | Certified LGBTBE, SBE, EBE, VSBE

Job Description Overview Function as a Foreman for Bergelectric Corp.; monitoring installations and ensuring work is performed according to Bergelectric Corp. standards and project specifications. Work cooperatively with the general contractor and/or customer in managing the project, project schedule and employees. Responsible for maintaining productivity, safety, quality control, labor cost, scheduling, movement of manpower, procurement of materials and any other activities impacting the successful completion of the project. This is considered to be a safety sensitive position. Responsibilities • Achieve Bergelectric Corp. productivity objectives by effectively managing and assigning tasks to crew members, while maintaining an accurate labor tracking log., • Establish project goals and monitor success in reaching those objectives on an ongoing basis., • Manage purchase orders and ensure ordered materials are received while adhering to bulk buy material procedures., • Adhere to project contract document changes and Bergelectric Corp. change., • order notice-to-proceed policies., • Fully utilize a prefabrication facility and company-wide installation methods and policies., • Ensure the proper safety equipment, materials and tools are onsite to perform the required work., • Provident Superintendent(s) with sufficient notice of any crew changes., • Utilize a proactive approach to anticipate and resolve potential issues., • Ensure crew members start and finish work shift on time; Maintain proper meal/break times as per Employee Handbook and as legally required per local labor laws and regulations., • Conduct effective performance evaluations of crew members., • Maintain complete and accurate “as-builts” as per Bergelectric Corp. procedures and project requirements., • Communicate effectively with a wide range of individuals including project owners, architects, general contractors, management, crew members, etc., • Ensure all work performed meets with NEC, federal, state, county, local codes and contract documents., • Adhere to all Bergelectric Corp., state and federal safety policies and procedures., • Provide leadership in fostering a teamwork environment in all aspects of job responsibilities., • Monitor and focus on employee / crew morale to ensure positive outcomes of all situations., • Ensure compliance with all policies and procedures included in the Bergelectric Corp. Employee Handbook. Qualifications • A minimum of two to four years of field experience working as a Journeyman Electrician., • Must hold a current Journeyman Wireman license (if required by the applicable state, city or county)., • Demonstrated ability to effectively order and track materials, perform cost projections and develop “as builts”., • Strong, first-hand knowledge and experience related to scheduling, material lead times, product knowledge and installation durations., • Solid understanding of the electrical codes and installation methods., • Well-versed in the installation of power systems: lighting, fire protection, security and data networks., • Knowledgeable regarding the build, installation and maintenance of control panels, • Comfortable utilizing Electrical Single Line blueprints., • Experience in verifying the compliance and functionality of installations., • Knowledgeable in the identification and repair of faults in electrical apparatus and circuits.

Job Description Here at Synergy Companies we take great pride in our work. We currently have immediate openings for Electricians with these positions you will have steady year-round employment. We offer competitive pay based on everyone's demonstrated trade skills and applicable experience. If you are looking to find a home with a company who are fun, loving and care about our employees and their families then apply here. Synergy Companies is a full service Energy and environmental management contractor specializing in residential and small commercial energy upgrade products and services. Responsibilities: • Install and repair electrical equipment and fixtures, • Install various types of conductors, • Weatherheads, • Install conduit PVC and EMT, • Home run circuits / Termination and breaker Qualification: • Experience in retrofitting, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skills, • 1-2 years in field residential electrical experience Benefits: • 401k after 1 year of employment 50% match, • Medical insurance at no cost for the employee, • Vision insurance, • Dental insurance, • Vacation 40 hr. per year eligible after 1 year of employment, • Paid sick time

Job DescriptionJoin Electrical Power Source in Fresno, California as a California Journeyman Electrician • Installation of control components on automated equipment, • DC and AC wiring of automated equipment, • Troubleshoot electrical circuits, • Manufacture electrical enclosures· Support Con-Vey’s mission statement, and key performance indicatorsSkills & Qualifications:, • Excellent problem solving and analytical skills required, • Basic computer skills, such as Microsoft Excel and Word, • Understand industrial automation and controls, • Ability to work independently and in groups, • High degree of attention to detail, • Ability to multitask, work in a fast-paced team environment, and work within deadlinesBenefits:, • Excellent wages and benefits, • health, dental, life, and long-term disability insurance, • 401k with company match, • Paid vacation, holidays, and sick payJob Type: Full-time E04JI802fng3404cuc4

Job Description Here at Synergy Companies we take great pride in our work. We currently have immediate openings for Residential Electricians. With this position you will have steady year-round employment. We offer competitive pay based on everyone's demonstrated trade skills and applicable experience. If you are looking to find a home with a company who are fun, loving and care about our employees and their families then apply here. Responsibilities: • Install and repair electrical equipment and fixtures, • Install various types of conductors, • Weatherheads, • Install conduit PVC and EMT, • Home run circuits / Termination and Breaker Qualifications: • Experience in retrofitting, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skills, • ET Card required, • One year in the field experience in the residential electrical work Benefits: • 401k after 1 year of employment, • Medical Insurance at no cost for the employee, • Out of pocket for their dependents (Discounted), • Vision Insurance, • Dental Insurance, • Vacation 40hours per year eligible after 1 year of employment, • 5 days paid sick time\nCompany Description Great established principle-based company, BBB A-PLUS rating. Check us out at www.synergycompanies.com Great established principle-based company, BBB A-PLUS rating. \r\nCheck us out at www.synergycompanies.com

Job Description Electrician Trainee – Commercial (ET Card Required) RRE Inc. Electrical Contractor | Full-time | $25 – $30 per hour ABOUT TEAM RRE We've been in business since 2006 and we're growing fast. We're a relationship-based electrical contractor doing commercial and multi-family residential work across Northern California. We hire, coach, and hold each other accountable based on our core values. They're how we run every job site and every Team Talk. WHO IS TEAM RRE? "We are team players that prioritize open communication while exercising emotional control that do the right thing while being dedicated to winning, we are not perfect, we learn from our mistakes while in the process of being great." TEAM RRE CORE VALUES • We are Team Players, • We Prioritize Open Communication, • We Exercise Emotional Control, • We Do the Right Thing, • We are Dedicated to Winning Ask yourself: "Can I live up to these Core Values every single day?" If the answer is anything less than yes, this isn't the right team for you, and that's okay. TEAM RRE STANDARDS • We have Clients, not customers, • We call each other Team Members, not employees, • We have Team Talks, not meetings, • We are Positive, not negative, • We show up on time and give 110%, no excuses, • We respect others: we say "Please" and "Thank You", • We respond quickly to calls, texts, and emails, • We keep our job sites 100% clean and organized, • We care about you getting home safely to your loved ones TEAM RRE PURPOSE To provide our clients with maximum value and the greatest communication possible as team players that do the right thing and are dedicated to winning. WHAT YOU'LL DO Working under the direct supervision of a state-certified electrician, you will: • Read basic plan information, including lighting, power, and rooftop power plans, • Lay out and install branch circuits, • Coordinate proper wire and conduit sizes, • Bend conduit into multiple layout configurations, • Install various types of lighting, including specialty lights, • Operate common power tools (saws, threaders, hydraulic benders, knockout punches), • Properly label circuits, wires, breakers, and cover plates, • Complete daily time sheets and track materials and work orders, • Maintain accountability for tools, equipment, vehicles, and materials WHAT YOU NEED (REQUIRED) • Active California Electrician Trainee (ET) card, • Minimum of 2–3 years of electrical experience on commercial projects, • OSHA 10, • CPR certification, • Fall Protection training, • Ladder Safety training, • Working knowledge of the National Electrical Code (NEC), • Reliable transportation to job sites up to 70 miles one-way, • Available for occasional weekend or holiday work when needed, • A positive, team-first attitude NICE TO HAVE • OSHA 30, • Forklift, scissor lift, or boom lift certification, • Experience with panels, feeders, or underground work WORKING CONDITIONS With or without reasonable accommodation, field team members: • Work outdoors in all weather, including extreme heat and cold, • Work on ladders (up to 14 ft A-frame and 32 ft extension) for extended periods, • Work at heights using boom and scissor lifts, • Work in tight spaces such as attics, crawl spaces, and switchgear rooms, • Lift more than 50 lbs, • Wear required PPE (eye protection, hard hat, long sleeves, respirator when needed), • Work up to 10 hours a day SAFETY FIRST Trainees do not work on energized circuits. RRE follows a strict standard for measuring voltage and accessing energized circuits. PAY & BENEFITS • $25 – $30 per hour, based on experience and skills, • Six paid federal holidays per year, • Paid sick leave, front-loaded each 12-month period, • Health insurance through Sentry (optional enrollment; coverage begins 60 days after hire, premiums shared with RRE), • A real career path as we expand geographically and across trade skills HOW TO APPLY Apply through this ZipRecruiter posting with your full resume. Include your ET card status and your current safety certifications. RRE Inc. is an equal opportunity employer. Qualified applicants with arrest or conviction records will be considered in accordance with the California Fair Chance Act. \nCompany Description We are in the process of building the greatest Team in the industry, with a great culture that provides maximum value to our clients and team members. It is important that our team members are taken care of. We hold our team to a different standard, which sets us apart from others. We are a fast-growing company. We are building a team in the United States and internationally with a real culture and will have it no other way as it takes everyone on the team to be great. We have a positive team culture and will keep it that way! Team RRE Core Values: We are team players We prioritize open Communication We exercise Emotional control We do the right thing We are dedicated to winning In business since 2006 and in the process of growing our team! We are in the process of building the greatest Team in the industry, with a great culture that provides maximum value to our clients and team members. It is important that our team members are taken care of. We hold our team to a different standard, which sets us apart from others. We are a fast-growing company. We are building a team in the United States and internationally with a real culture and will have it no other way as it takes everyone on the team to be great. \r\n\r\nWe have a positive team culture and will keep it that way!\r\n\r\nTeam RRE Core Values:\r\nWe are team players\r\nWe prioritize open Communication\r\nWe exercise Emotional control\r\nWe do the right thing\r\nWe are dedicated to winning\r\n\r\nIn business since 2006 and in the process of growing our team!

Job Description We are currently seeking a Journeyman Electrician! You will strive to provide safe electrical systems for a variety of customers. Responsibilities: • Install and repair electrical equipment and fixtures, • Install various types of raceway and cable tray systems, • Troubleshoot motor and control systems, • Perform routine maintenance on electrical wiring and systems, • Adhere to all quality and safety codes Qualifications: • Previous experience in commercial electrical, • Familiarity with electrical schematics, blueprints, and manuals, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skillsCompany DescriptionATC electric only works with commercial customer, no residential work, work indoors in temperature controlled environment, lots of over time available and traveling if wanted.ATC electric only works with commercial customer, no residential work, work indoors in temperature controlled environment, lots of over time available and traveling if wanted.

Job DescriptionJob Title: Foreman Industrial Electrician Job Description This role leads industrial electrical construction projects from pre-construction planning through to completion across multiple sites in the Central Valley. The Foreman Industrial Electrician oversees field activities, coordinates with teams of journeyman and apprentice electricians, and ensures that projects are delivered safely, on time, within budget, and to high quality standards. Typical work includes industrial and agricultural facilities, motor control centers, and large-scale conduit installations. Responsibilities • Oversee electrical construction projects from initial planning through final completion, ensuring work is performed safely, efficiently, and in compliance with applicable codes and standards., • Lead and coordinate teams of journeyman and apprentice electricians on large-scale industrial projects, providing direction, support, and technical guidance., • Plan, install, and oversee the running of EMT, rigid, PVC, Ocal, stainless steel, and aluminum conduit systems for industrial and agricultural facilities., • Perform and supervise conduit bending using Chicago benders, hand benders, triple nickel, Fresno benders, and other appropriate tools to meet project specifications., • Coordinate and participate in pulling and terminating wire, ensuring proper routing, labeling, and connections according to drawings and basic circuitry principles., • Work on and supervise installations involving industrial 3-phase motors, motor control centers (MCC), and motor control rooms, ensuring proper configuration and operation., • Review project requirements and adjust manpower, tools, and materials to meet changing priorities across multiple sites and assignments each week., • Maintain a consistent on-time presence at the job site and model professional behavior, including a positive attitude and strong work ethic., • Adapt to working on 23 different jobs per week, moving between locations such as Fresno, Hanford, Coalinga, Tulare, Firebaugh, and Merced as project needs arise., • Collaborate closely with other foremen and journeyman electricians to solve field issues, interpret plans, and maintain project momentum., • Monitor workmanship and quality of installations, ensuring all conduit, wiring, and equipment are installed neatly, securely, and according to design., • Support long-term project schedules, including short-term assignments (such as 46 week projects) and subsequent transitions to new sites., • Promote a safe and respectful work environment, encouraging teamwork and clear communication among all crew members. Essential Skills • Experience as an ET, Apprentice Electrician, or Journeyman Electrician in industrial or agricultural settings., • Proficiency in bending EMT, rigid, Ocal, stainless steel, and aluminum conduit accurately to specification., • Ability to use conduit benders, including Chicago benders, hand benders, triple nickel, and Fresno benders, with confidence and precision., • Strong understanding of basic electrical circuitry and its application in industrial environments., • Hands-on experience working with industrial 3-phase motors, including installation and basic troubleshooting., • Experience working on motor control centers (MCC) and motor control rooms in industrial facilities., • Reliability in arriving to work on time and maintaining consistent attendance., • Positive attitude and professional demeanor when working with crews and project stakeholders., • Flexibility to handle multiple projects and assignments, including working on 23 different jobs per week., • Willingness and ability to travel between various project sites as needed. Work Environment The work takes place on large-scale industrial and agricultural electrical projects, where you lead or work closely with teams of journeyman and apprentice electricians. Current and upcoming assignments include facilities in Firebaugh (approximately 46 weeks) with subsequent moves to other sites such as Fresno, Coalinga, Hanford, Tulare, Merced, and surrounding areas. The environment is field-based and hands-on, involving extensive conduit installation, bending, and wiring in motor control centers and industrial motor rooms. Work hours follow typical construction schedules, and you should expect to be on-site, traveling between projects as needed, and working with standard industrial electrical tools and equipment, including various types of conduit benders. The setting is fast-paced, collaborative, and focused on completing projects safely, efficiently, and to high quality standards. Job Type & Location This is a Permanent position based out of Clovis, CA. Pay and Benefits The pay range for this position is $93600.00 - $93600.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Medical and Dental. 401k match. reimbursement for travel, class towards and JM test. Workplace Type This is a fully onsite position in Clovis,CA. Application Deadline This position is anticipated to close on Oct 20, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Daniels Health is seeking a versatile Travelling Handyman to support facility and plant operations across a growing multi-site footprint. This role handles a wide range of general building maintenance and light repair work, including minor carpentry, electrical, plumbing, painting, and fixture work, needed to keep Daniels Health locations safe, clean, and fully operational. The Travelling Handyman also supports capital construction and equipment installation projects, including Autoclaves, Wash lines, Compactors, and boiler rooms, led by the General Contractor, handling site preparation, punch-list, and finish work alongside licensed trades. This is a full-time, W2 position requiring travel to project sites approximately 50% of the time, with flexibility to support day shift and, where needed, 2nd shift coverage. What you will do General Maintenance & Repair • Perform general building maintenance and repairs, including drywall patching, painting, doors, locks, hardware, ceiling tiles, flooring, and fixtures across Daniels Health facilities., • Complete minor electrical tasks (replacing lights, switches, and outlets) and minor plumbing tasks (faucets, toilets, drains, and fixtures) within the limits of applicable licensing rules., • Assemble, install, and repair furniture, shelving, signage, safety equipment, and wall-mounted items., • Carry out preventative maintenance checklists and respond to work orders that affect plant uptime, safety, or building operations. Capital Project & Installation Support, • Support site preparation, demolition, cleanup, and punch-list work for Autoclave, Wash line, Compactor, and boiler room projects., • Work alongside the General Contractor, electricians, plumbers, carpenters, and subcontractors to keep project scopes on schedule., • Read basic drawings, work orders, and equipment specifications to guide assigned tasks., • Stage materials, tools, and equipment so trades can work efficiently on site. Multi-Site Travel & Coverage, • Travel to multiple sites (approximately 50%) across assigned regions: Midwest, East Coast, Florida, and Texas, with priority coverage in California, Texas, Florida, and Georgia to complete repairs and support maintenance and installation projects., • Maintain flexibility to support day shift and, where needed, 2nd shift coverage based on site needs., • Transport, maintain, and account for tools, materials, and equipment between job sites. Cross-Functional Collaboration, • Partner with Plant Managers, the General Contractor, and maintenance stakeholders to prioritize repairs and improve facility condition., • Provide regular updates to the Head of Infrastructure, Plant Manager, and General Contractor on job progress, material needs, and site conditions., • Identify issues that require a licensed electrician, plumber, or HVAC technician and escalate them promptly., • Ensure minimal disruption to ongoing facility operations during repair and maintenance work. Safety & Compliance, • Complete all work in compliance with OSHA, local building codes, and internal safety standards., • Follow lockout/tagout, ladder, fall-protection, and safe power-tool procedures, whether working independently or alongside subcontractors., • Stay within the scope permitted for unlicensed work in each state and refer licensed-trade work to the appropriate professional. What we are looking for • 3+ years of general maintenance or handyman experience in commercial, industrial, manufacturing, or multi-site facilities environments., • Working skills across multiple trades, including minor carpentry, drywall, painting, basic electrical, and basic plumbing., • Proficient with hand tools, power tools, and basic diagnostic tools., • Familiarity with capital construction or equipment installation projects (e.g., autoclaves, wash lines, compactors, boiler rooms) preferred., • Ability to read work orders, basic drawings, and technical specifications., • Strong practical judgment and a solution-focused approach., • Ability to travel up to 50% consistently, including priority regions (CA, TX, FL, GA)., • Flexibility to support day shift and, where needed, 2nd shift coverage., • High school diploma or equivalent; trade-school or vocational training preferred., • Valid driver’s license in good standing and ability to travel by air and ground., • Ability to pass background check/drug screening as required., • OSHA 10-Hour Safety Certification required., • EPA 608 certification, aerial/scissor lift, or forklift training a plus., • State or local handyman registration where required by jurisdiction.Why work for us, • Job Stability – As an essential service to healthcare, Daniels Health is non-seasonal and recession-proof, • Comprehensive Benefits – Medical, Dental, and Vision Insurance effective on Day One; Paid Short-Term Disability; Company-sponsored Life Insurance; Voluntary Long-Term Disability and Accident Insurance, • 401K Matching Plan – 50% employer match on up to 6% contribution (up to 3% employer contribution) with a 5-year vesting schedule and no waiting period on the match, • Permanent Position – Full-time, 40 hours per week with long-term career potential, • Mission-Driven Work – Be part of a company that’s making healthcare safer and more sustainable through innovative waste management solutions, • Growth & Development – Opportunities to expand your skills in leadership, data analysis, and cross-functional collaboration within a supportive and evolving organization If you're looking for a stable, mission-driven role where your leadership makes a real impact, we’d love to hear from you. At Daniels Health, you’ll be part of a team that values safety, innovation, and people. Apply today and take the next step in your career with a company that’s transforming healthcare waste management for good. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionBenefits: • Health insurance, • Opportunity for advancement, • Company car, • Competitive salary, • Dental insurance ChargeTronix · Field-based (Southern California home base) · Full-time · Heavy travel. A senior DC fast-charger technician who is the escalation point for the hardest faults, commissions new sites, mentors Tier I/II techs, and owns uptime in the territory. Who we are ChargeTronix designs and builds modular DC fast chargers that are made to be serviced in the field, not shipped back to a factory. We stand behind every unit we install, which means our field team is the product as far as the customer is concerned. You will work on our own hardware, with a direct line to the engineers who designed it, and what you find in the field changes what we build next. The role This is the top technical field position on the service team. A Tier II technician fixes what the ticket says. A Senior (Tier III) technician is the person Tier II calls when the fix does not work, the person who commissions a new site and signs off that it is ready to charge, and the person who turns a pattern of repeat faults into a root cause and a field bulletin. You will be responsible for a territory's uptime, mentor junior technicians, act as the primary on-site contact for customers and site hosts, and feed structured failure data back to engineering. You work independently with little supervision and are trusted to make safety and repair judgment calls on site. Reports to: Field Service Manager. No direct reports; technical lead for Tier I/II technicians in the territory. What you'll do Diagnose and repair (Tier III escalation) • Resolve the DC fast-charger faults that Tier I/II could not: power electronics, control and communication boards, contactors, cooling systems, cable and connector assemblies, and vehicle interoperability failures., • Repair at the component level where it is the right call (power modules, SECC/PD/MCU boards, power supplies, contactors, IGBTs, sensors) rather than defaulting to a full-unit swap., • Read and interpret PLC, CAN, and OCPP logs to isolate root cause; capture evidence (logs, photos, meter readings) for engineering and warranty., • Provide remote phone and video support to junior technicians on live sites. Commission and test • Commission new installations: verify incoming 480 V service, grounding and bonding, torque values, firmware, network and backend (OCPP) registration, and payment/authorization., • Run acceptance charge tests across multiple vehicle platforms and connector types (CCS1, NACS, CHAdeMO), and sign off that a site is ready for service., • Maintain and update the test-vehicle fleet (hardware, software, adapters) and run interoperability tests as new vehicles and NACS adapters enter the market., • Execute field upgrade and retrofit campaigns (NACS cable and adapter retrofits, firmware rollouts, engineering change orders). Own reliability in your territory • Own uptime, mean time to repair, and first-time-fix rate for the sites in your territory, and report on them weekly., • Perform scheduled preventive maintenance to the ChargeTronix PM checklist and recommend changes to it., • Spot repeat-fault patterns across sites, drive them to root cause, and write field service bulletins and work instructions so the fix scales., • Manage truck stock and territory spares; tag and return failed parts with complete failure data for RMA and warranty. Lead and mentor • Train and ride along with Tier I/II technicians; sign off their readiness to work independently., • Write and maintain SOPs, troubleshooting guides, and training material for the service team., • Act as the primary on-site contact for customers, site hosts, electrical contractors, utilities, and inspectors; explain technical issues to non-technical people. Safety • Work as an NFPA 70E qualified person: perform job hazard analysis, lockout/tagout, arc-flash risk assessment and PPE selection on every energized job., • Hold stop-work authority and use it. Model safe work for junior technicians and site contractors., • Perform all electrical work to NEC (including Article 625), local code, and manufacturer specification. Document and communicate • Complete an accurate field service report and close the ticket for every visit, same day., • Communicate issues, delays, risks, and parts needs to the service manager proactively, with a proposed solution., • Keep tools, test equipment, vehicle, and PPE calibrated, organized, and inspection-ready., • Other duties as assigned. What success looks like • First 30 Days: Completed ChargeTronix product and safety onboarding; NFPA 70E qualified-person status current; working independently on Tier II tickets., • First 90 Days: Handling Tier III escalations in the territory without engineering support on routine faults; first commissioning signed off; first field bulletin or SOP written., • 6 Months: Territory uptime at or above the company target (97%+ measured per site); first-time-fix rate above 85%; at least one Tier I/II technician trained and signed off., • 12 Months: Repeat-fault rate in the territory trending down with documented root causes; test-vehicle and NACS interoperability program running on a schedule; recognized by customers as their go-to contact., • Targets: Targets are starting points and will be set with you in your first month. What you bring (required) Experience • 5+ years of hands-on electrical or electromechanical field service, including 3+ years on EV charging equipment, with at least 2 years on DC fast chargers (50 kW and above)., • Demonstrated component-level repair on DCFC hardware (power modules, control/communication boards, contactors, cooling) and cable/connector replacement (CCS, NACS, CHAdeMO)., • Experience with 480 V three-phase systems and high-voltage DC; comfortable reading one-lines, wiring diagrams, and schematics., • Track record of training or leading other technicians, or of writing procedures others follow. Credentials (one of the following) • California General Electrician Certification or a journeyman/master electrician license from another state; or, • EVITP certification; or, • 5+ years documented DCFC field service with component-level repair, and California Electrician Trainee (ET) registration obtained within 90 days of hire. And all of the following • NFPA 70E qualified-person training current, or completed within 60 days of hire (company-provided)., • OSHA 10 (OSHA 30 preferred)., • CPR/First Aid, including low-voltage rescue, current or completed within 60 days of hire (company-provided)., • Valid driver's license with a clean driving record; able to pass a background check and DOT-style medical clearance for a company vehicle. Technical skills • Working knowledge of NEC (Article 625 in particular), NFPA 70E, and OSHA 29 CFR 1910 Subpart S., • Proficient with multimeters, clamp meters, insulation-resistance testers, and torque tools; able to use an oscilloscope or data logger when a fault calls for it., • Able to read charger logs and communication traces (PLC, CAN) and identify where a charge session failed., • Networking basics for connected chargers: Ethernet, cellular modems, Wi-Fi, RS-485, and backend connectivity troubleshooting., • Comfortable with ticketing and CRM tools (Salesforce, Zendesk, or similar), Microsoft Office or Google Workspace, and writing a clear field report. How you work • Independent and decisive on site, and knows when to call for help., • Customer-first: calm with site hosts and drivers when a station is down, and clear when explaining what happened., • Reliable under heavy travel; plans the week to maximize sites served per trip. Nice to have • Hands-on service on two or more DCFC platforms: ABB, Tritium, BTC Power, SK Signet, Kempower, Alpitronic, Autel, ChargePoint, Sinexcel, Tellus, Longhorn, Blink, Tesla., • Working knowledge of OCPP 1.6J / 2.0.1, ISO 15118 and DIN 70121, and how a failed handshake shows up in logs., • OEM manufacturer service certifications on any of the platforms above., • Experience commissioning solar, battery storage, UPS, or other power-electronics equipment., • Aerial lift or forklift certification., • Bilingual English/Spanish. Compensation, classification, travel and schedule Pay: $75,000 to $85,000 per year, depending on experience, credentials, and platform depth. Per diem on travel days, and an on-call differential are paid in addition to base. Classification: Full-time, exempt. Travel: 75% or more. Multi-day regional trips by vehicle and periodic air travel out of state. Home base in Southern California; home most weekends. Schedule: Monday to Friday standard hours, plus a paid on-call rotation for emergency dispatch and occasional weekend or after-hours work when a site is down. Technicians plan their own routes and workdays to serve the most sites per trip. Benefits: Medical, dental, and vision; 401(k); paid time off and holidays; company vehicle, phone, laptop, tools, and PPE; paid training and certification (NFPA 70E, OSHA 30, EVITP, OEM courses). Physical requirements and work environment • Regularly stands, walks, bends, kneels, stoops, crouches, climbs, and works from ladders or lifts., • Frequently lifts and moves 50 lb; occasionally more with assistance or equipment (charger doors, power modules, cable assemblies)., • Works outdoors in all weather, in heat and cold, in noisy environments, and in confined cabinet spaces., • Works around energized equipment up to 480 VAC and 1,000 VDC with appropriate PPE., • Drives a company vehicle for extended periods and flies periodically., • Close and color vision required to read displays, wiring, and indicator lights., • Reasonable accommodations will be made to enable qualified individuals with disabilities to perform the essential functions. Equal opportunity ChargeTronix is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by federal, state, or local law. This job description is a general overview of the position and is not an exhaustive list of all responsibilities, duties, and skills required.

Requisition ID # 168118 Job Category: Maintenance / Construction / Operations Job Level: Individual Contributor Business Unit: Electric Operations Work Type: Onsite Job Location: Hayward; Alameda; Antioch; Burney; Chico; Concord; Davis; Fairfield; Fremont; Fresno; Jackson; Lemoore; Livermore; Los Banos; Merced; Modesto; Oakland; Oroville; Paso Robles; Redding; Rocklin; Sacramento; Salinas; San Carlos; San Francisco; San Francisco; San Jose; San Luis Obispo; San Mateo; San Rafael; Santa Rosa; Sonoma; Sonora; South San Francisco; Stockton; Tracy; Ukiah; Vacaville; Woodland This job posting will be utilized to fill open Journey-level Electrician-General Construction positions within ALL REGIONS of our service territory. Open positions could become available at any time and based on business needs. Department Overview The people of Electric Operations ensure the delivery of safe and reliable electric service to our customers. Electric Operations is responsible for every aspect of PG&E's electric distribution and transmission operations, including planning, engineering, maintenance and construction, asset management, business planning, restoration, and emergency response. Position Summary This classification is represented by the International Brotherhood of Electrical Workers (IBEW) local 1245, which has over 100 years of experience representing employees at PG&E. This position may be subject to Joint Apprentice Training Committee (JATC) review and approval. Provisional hires will be required to participate in targeted training to achieve journey-level knowledge of electrician roles and responsibilities. Please note: Per letter of agreement (LOA) 23-36; All future employees who are hired, assigned, placed, or bid (after the execution date of this agreement) into one of the classifications listed (in agreement) and in the San Francisco Division ONLY is eligible for a 15% pay premium and will be subject to a "bid lock" for three (3) years. In addition, Peninsula, De Anza, East Bay, and Mission divisions are eligible for a 10% pay premium and will be subject to a "bid lock" for three (3) years. General Construction (GC) For GC positions individuals must be able to travel and transfer to a new headquarters upon request at any time, throughout the entire PG&E service territory with no guarantees as to how long you will be away from home. Reviews, verifies, and modifies prints and electric schematics. Lays out materials for installation, such as conduit, steel, wires, junction boxes, tools, etc. Places orders for supplies as needed. Moves equipment to staging area. Performs safety preparation including performing high voltage protective grounding. Uses power tools and hand tools to install equipment and systems, such as wire terminations, high voltage equipment, overhead and underground electrical and conduit systems, steel structures, control panels, metering and protection systems, air switches. Sets up rigging. Pulls wire. May operate construction equipment, if qualified, such as crane truck, man lift, boom truck, bucket truck as part of installation, excavation, and compaction. Operates forklift to move and reposition equipment. Uses hand and power tools, such as jackhammers, whackers, and shovels to remove and replace soil. Removes old high voltage equipment, structures and other impediments prior to installation using heavy equipment, rigging and other tools. Drives equipment on the job site (substation). May drive equipment from one job site to another. May drive a company vehicle to pick up tools or other equipment away from the job site. Maintains work area in a clean and safe condition. Removes trash, debris, and excess materials. Picks up and reorganizes tools. Overtime may be required. PG&E is providing the hourly rate that the company in good faith believes it might pay for this position at the time of the job posting. This position is subject to collectively bargained hourly wage rates and increases. The starting wage rate for this position is $68.56 per hour. This wage rate is specific to the locality of the job. The wage rate is based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity. Qualifications - Minimum: Must be at least 18 years of age. Must possess a High School diploma or GED. Must possess and maintain a valid California Class C Driver's License Must show proof of successful completion of a Union Sanctioned JATC Inside Wireman Electrician Apprenticeship Ability to work in all types of weather extremes. Ability to drive safely in all weather and road conditions. Must be willing to travel/ transfer to new headquarters upon request at any time; throughout the entire PG&E service territory with no guarantees as to how long you will be away from home (For GC positions) Ability to work extended hours, nights, weekends and holidays, and various work schedules. Ability to work in remote work locations with potential exposure to poison oak, snakes, spiders, bees, mosquitoes, ticks, rodents etc. Must be able to wear company provided Personal Protective Equipment (PPE) If hired as Provisional, must pass the provisional training plan within 12 months from hire date. CA CDL Class A Permit, or equivalent, subject to 150% driver/vehicle ratio Desired: 3-5 years Journey level experience in commercial or industrial electrical construction PG&E construction or utility experience Experience with electronic or mechanical equipment Instrumentation and Control experience Motor Control experience Electrical Substation or Power Generation experience High voltage experience Experience working with testing equipment and troubleshooting Pre-Employment Testing: PG&E Employees: You must have qualified on all prerequisite tests prior to submitting an application; and all secondary tests prior to interviewing. For more information on prerequisite and secondary exams, including study guides, please visit the Pre-employment testing program (https://www.pge.com/en_US/for-our-business-partners/floating-pages/pre-employment-testing-program/test-preparation-guides.page?ctx=large-business%20/) website. Physical Test Battery (PTB) Work Orientation Inventory-Physical/Technical Driving (WOI-D) Electrician Assessment

Licensed Electrician Job Responsibilities include, but not limited to:. Licensed Electrician - Other Requirements include, but not limited to:. Licensed Electrician Employee Benefits & Perks:.

Keywords: Energy Marshal, Journeyman Electrician, Licensed Electrician, Electrical Foreman, LOTO, MOPs, Energization, Switching, NFPA 70E, Critical Power, Data Center Construction, Power Distribution, High Voltage, Commissioning, Mission Critical, Hyperscale, MV/HV, Substations. Journeyman/Licensed

Company Description Sweat Electric, LLC is a Kansas-based electrical contractor specializing in the power and infrastructure that keeps critical facilities operating reliably. Since 2005, the company has built a strong reputation for code-compliant, durable electrical work grounded in a “do it right, build it to last” mindset. Sweat Electric focuses on electrical systems for data centers, supporting the expanding needs of compute, cloud, and AI with reliable, scalable, and always-on power solutions. The team partners with developers, operators, and general contractors across the contiguous United States on power distribution, backup systems, switchgear, and installation work that protects continuous operations. As demand grows, Sweat Electric offers electricians meaningful career paths in the data center industry, emphasizing safety, craftsmanship, and long-term performance. Role Description The Apprentice Electrician role at Sweat Electric, LLC is a full-time, remote position, with the location dependent on the job site. The Apprentice Electrician will support licensed electricians on data center and critical facility projects, assisting with testing of power distribution systems and electrical equipment. Daily responsibilities include helping with maintenance and repair tasks, learning to read and interpret electrical drawings, and supporting testing and troubleshooting under supervision, and unsupervised when comfortable. The role involves following safety protocols, understanding and practicing lock-out-tag-out (LOTO) procedures, using hand and power tools properly, and keeping work areas organized and compliant with applicable codes and standards. The Apprentice Electrician will receive on-the-job training to build skills in data center electrical infrastructure, with opportunities for growth toward journeyperson-level responsibilities. Qualifications • Foundational knowledge of electricity and basic electrical work skills., • Ability to assist with maintenance & repair and basic troubleshooting of electrical systems., • Interest in developing skills related to electrical engineering concepts and data center infrastructure., • Commitment to safety practices, including use of PPE and adherence to OSHA and company safety policies., • 10 Hour OSHA class required., • Ability to follow instructions, work as part of a crew, and communicate clearly with supervisors and teammates., • Strong attention to detail, reliability, and willingness to work in physically demanding environments (standing, lifting, working at heights as needed)., • Minimum requirement of the completion of an electrical apprenticeship or electrician trade program., • High school diploma or equivalent., • Valid driver’s license and ability to travel to local and regional job sites as required., • Prior experience in construction, facilities, or trades work is beneficial but not required.

Ever since we started in 2007, Sunrun has been at the forefront of connecting people to the cleanest energy on Earth. It's why we've become the #1 home solar and battery company in America. Today, we're on a mission to change the way the world interacts with energy, and we're building a company and brand that puts power at the center of life. And we're doing it by designing a dynamic culture where employee development, well-being, and safety come first. We're unlike any other solar company. Our vertically integrated model gives us total control over every part of the energy lifecycle from sale through installation and beyond so you can find endless opportunities for growth. Come join a career you can grow in and a culture you can run with. Overview As a Certified Electrician at Sunrun you will be working on a variety of projects from installing solar systems, performing work for our existing customers, and learning more about energy storage and other new technology. Responsibilities • Lead the installation of electrical systems that interconnect our solar array to the grid power of our customer's residential property, • Ensure work performed by all electricians is of good workmanship and compliant with current NEC and local codes, • Complete solar battery installations as assigned, • Troubleshoot system problems and resolve electrical issues, • Safely plan and complete Main Panel Upgrades (MPU), • Work with branch team and home owners to fulfill any necessary system upgrades/repairs to support our solar equipment, • Work with local inspectors to satisfy local requirements and expectations, • Additional duties assigned as needed, • 5% travel required Qualifications • Electrical installation and repair experience required, • Experience with electrical work involving wiring up to 600 VDC and 480 VAC, • Working knowledge and experience replacing residential electrical services and distribution panels preferred, • Must possess a valid Journeyman License/Electrician Certification or equivalent per local and state requirements, e.g. wireman license, • Must maintain a clean driving record with the ability to pass a driving background check, • Must be 21 years of age and possess a valid driver's license, • Safety and customer focus Physical Demands • Ability to transport materials and equipment to complete assigned job tasks (up to 50 pounds frequently and up to 100 pounds with assistance), • Ability to work on rooftops with various angles and surfaces which requires frequent bending, twisting, squatting, climbing, kneeling, crawling, turning, standing, and balance, • Ability to work in confined spaces such as attics, basements, and crawl spaces which requires kneeling and crouching, • Ability to work in outdoor weather conditions including but not limited to: excessive noise, extreme heat, extreme cold, wet environment, and humidity, • Ability to frequently utilize hand functions requiring fine motor skills including but not limited to: fine manipulation, grasping, and pinching, • Ability to work within the safe range of equipment such as ladders, fall protection harnesses and other personal protective equipment, • Ability to work while wearing heavy protective equipment such as arc flash suits, gloves, and face shields, • Ability to work and maintain balance on roofs and other areas of height, • Ability to work in the sun and possibly low light conditions, • Ability to walk on rafters, roof tiles, and roof shingles without damage, • Ability to distinguish colors such as red, black, yellow, white, green, • Ability to hear verbal commands and warnings, • Ability to work with chemicals using appropriate protection Starting salary/wage for this opportunity: $45.26 to $60.34 Compensation decisions will not be based on a candidate's salary history. You can learn more here. If you are a qualified individual with a disability and you need reasonable accommodation during the hiring process or to perform this role, please contact us at candidateaccommodations@sunrun.com. Sunrun is proud to be an equal opportunity employer that does not tolerate discrimination or harassment of any kind.

This Industrial Journeyman Electrician role focuses on overseeing electrical construction projects from pre-construction planning through to completion across multiple industrial and agricultural sites. You manage cost, quality, and schedule while performing hands-on electrical work such as running and bending conduit, installing wiring, and working with 3-phase motor control systems. You collaborate closely with foremen and other electricians to deliver large-scale projects safely, efficiently, and to a high standard. • Oversee industrial electrical construction projects from initial planning through to successful completion, ensuring work is delivered on time, within scope, and to quality standards., • Install and run EMT, rigid, PVC, Ocal, stainless steel, and aluminum conduit on large-scale industrial and agricultural projects., • Use hand benders and other bending equipment, including Chicago bender, hand bender, triple nickel, and Fresno bender, to bend conduit accurately to specifications., • Pull and terminate electrical wiring and cabling in accordance with project drawings, codes, and safety standards., • Work closely with foremen and other journeyman or apprentice electricians to coordinate daily tasks and maintain efficient workflow on site., • Interpret and work from basic circuitry diagrams and electrical schematics to install and troubleshoot electrical systems., • Install, maintain, and troubleshoot industrial 3-phase motors and associated equipment., • Work in motor control centers (MCC) and motor control rooms to install and service control panels, starters, and related control devices., • Support and lead teams on large-scale projects, providing guidance and direction to other electricians as needed., • Adapt to working on multiple projects per week across different locations, maintaining flexibility in assignments and tasks., • Arrive on site reliably and on time, maintaining a professional and dependable presence., • Maintain a positive attitude and contribute to a collaborative, safety-focused work culture., • Follow all relevant electrical codes, safety procedures, and company standards while performing work., • Remain open to relocating between project sites, including areas such as Fresno, Hanford, Coalinga, Tulare, Firebaugh, and Merced, as project needs evolve., • Journeyman Electrician, Apprentice Electrician, or Electrical Technician experience with industrial project experience., • Strong ability to bend EMT, rigid, PVC, Ocal, stainless steel, and aluminum conduit accurately and efficiently., • Proficiency using conduit bending tools, including Chicago bender, hand bender, triple nickel, and Fresno bender., • Solid understanding of basic circuitry and ability to read and work from electrical diagrams and schematics., • Hands-on experience working on industrial 3-phase motors, including installation, maintenance, and troubleshooting., • Experience working in MCCs and motor control rooms on motor control panels and related equipment., • Reliability in attendance and punctuality, consistently arriving on time for scheduled work., • Flexible mindset with willingness to work on 23 different projects per week as needed., • Positive, team-oriented attitude and strong interpersonal skills when working with foremen and other electricians., • Ability to work safely and efficiently on large-scale industrial and agricultural electrical projects., • Formal electrical training such as ET (Electrical Technician), Apprentice Electrician program, or Journeyman-level qualification., • Experience on industrial and agricultural facilities, including grain and ranch-related projects., • Comfort working across multiple geographic locations, including Fresno, Hanford, Coalinga, Tulare, Firebaugh, and Merced., • Experience contributing to and occasionally leading teams on large-scale electrical projects., • Demonstrated ability to manage changing priorities and project assignments while maintaining quality standards. This opportunity offers long-term employment with the stability of ongoing industrial projects and a supportive culture focused on teamwork and professional growth. You benefit from per diem and lodging support when working away from home, allowing you to focus on your craft while gaining valuable experience across diverse sites. The environment emphasizes respect, collaboration, and continuous learning, giving you the chance to build a strong career in industrial electrical work while enjoying consistent, rewarding project work. You work on large-scale industrial and agricultural electrical projects, often as part of teams that include journeyman and apprentice electricians. The role is field-based, with project sites in areas such as Fresno, Hanford, Coalinga, Tulare, Firebaugh, and Merced, and may require moving between sites as project needs change. The environment involves active construction settings, motor control rooms, and MCCs, where you regularly use a variety of tools and equipment, including EMT, rigid, PVC, Ocal, stainless, and aluminum conduit, as well as Chicago benders, hand benders, triple nickel, and Fresno benders. Work hours follow typical construction schedules and may vary by project, with an expectation of reliable attendance and readiness to handle multiple assignments per week. Safety standards are strictly observed, and attire is practical, task-appropriate workwear suitable for industrial construction sites. This is a Contract to Hire position based out of Clovis, CA. The pay range for this position is $30.00 - $40.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) This is a fully onsite position in Clovis, CA. This position is anticipated to close on Oct 16, 2026.

LiDestri Food and Drink has grown from our roots as a pasta sauce and salsa manufacturer to become an R&D engine, formulating and producing innovative food products for our national and retailer brand partners. A family-run company based in Rochester, NY, LiDestri employs over 1,000 people across three U.S. locations. We have decades-long partnerships with some of the most respected consumer packaged goods (CPG) companies and the most highly inventive retailer brands. The primary role of the Mechanic/Electrician III is to work as a leader on the maintenance team to support company objectives with respect to maintaining and enhancing equipment to support production requirements. Responsibilities include setup, repair, install, maintain machinery equipment including; mechanical, electrical, pneumatic and hydraulic systems, special projects, measuring and calibrating equipment, performing preventative maintenance duties; The role requires a person with leadership abilities and strong mechanical/electrical aptitude, which can work with internal and external customers, and can work as part of the maintenance team and has demonstrated the ability to work independently; Performs all production equipment setups as required to meet operational needs; Supports and completes Preventive and Planned maintenance of mechanical, electrical and utilities equipment including but not limited to; cleaning, inspecting, setup, diagnosing, replacement, testing and continuous improvements; Leads the efforts associated with building new and enhance equipment through continuous improvements upgrades; Inspect visually and listen to machines and equipment to locate causes of malfunction; Identifies and reports the need for repairs to Maintenance Management; Crosses over with previous shifts' maintenance and production employees to review the schedule and current runs, identifying repair needs and plan product changeovers; Effectively communicates with other departments in a professional manner at all times on equipment repair status; Works within the maintenance team to accurately communicate and document events so that others have the most effective information to solve problems; Leads in the diagnoses of mechanical and electrical malfunctions in machinery and equipment. Leads assembly and rebuilding efforts of high valued equipment; Leads efforts associated with plant shut-down maintenance work. Knowledge of fabricating, assembling and installing mechanical/electrical systems using tools associated with the task; Able to teach others the ability to either use shop equipment or programs needed to perform daily functions; Enhances the knowledge and skills of others in mechanical and electrical systems with mentoring and training techniques for team members; Leads efforts associated with Engineering and Maintenance Managers on projects and continuous improvement as needed; Completes all tasks while strictly adhering to all required industry guidelines to include and not limit to; Plant Safety, Food Safety, SQF and all internal/external audits; Report food safety & quality problems to personnel with authority to initiate action. High School Diploma or GED required; Basic computer literacy as evidenced by the ability to go online and conduct basic searches on the Internet, check email, create and send with attachments and use basic email features; Ability to read, write and interpret documents in English such as safety rules, procedure manuals, operating and maintenance instructions; Ability to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions and decimals; Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists; Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form; Experience working with manufacturing equipment including 3 phase motors, control wiring, 24VDC, 120VAC, 208/220VAC, 480VAC; Experience with Controls for Conveyor Systems, Pneumatics, Hydraulics, Pumps and Valves; Knowledge of and ability to comprehend and troubleshoot production machinery (i.e. Fillers, Rinsers, Cappers, Case Packers, Case Formers, Coolers and Pasteurizers); Familiarity with Lock-Out Tag-Out Authorized, Hot Work, Confined Space and HECP Training preferred; Ability to read and interpret electrical schematics; Ability to use a variety of measuring tools and test equipment; Ability to work independently, with limited supervision; Requires mechanical aptitude; Knowledge of Drill Press, Chop Saw, Port-a-Band, Sawzall and other maintenance tools preferred; Knowledge or experience with Multi-Meters, Amp Probes, Meger Ohm Meter, Panelview; LiDestri experience 5+ years and familiarly with 100% of plant machinery. Ability to work in a manufacturing environment with exposure to: Long periods of standing/moving, working around moving mechanical parts/conveyors Loud environment, hot/cold, wet/dry conditions, Lifting and carrying items <50lbs; Frequent reaching/pulling/climbing stairs/stooping/kneeling/bending DISCLAIMER: The duties listed above are intended only as illustrations of the various types of work that may be performed and is not an inclusive summary of job duties and responsibilities. The omission of specific statements of duties or responsibilities does not exclude them from the position. This job description does not constitute an employment agreement between the employer and the employee and is subject to change by the Company as the needs of the Company and requirements of the job change.

Job Summary Our electrician will support our internal team and our customers onsite, providing exceptional customer service.

Job Summary Our electrician will support our internal team and our customers onsite, providing exceptional customer service.

Job Summary Our electrician will support our internal team and our customers onsite, providing exceptional customer service.

Carrying standard equipment and parts with you at all times.Commuting between the locations at which you will work.Performing inspections, conducting assessments, and liaising with clients to ascertain the issues that warrant attention.Choosing the most apt course of action in light of project const

Electrician Job Duties: Install, maintain, and enhance electrical systems and components, including fuses, lights, and wiring Inspect, test, and diagnose issues with electrical systems and components Perform all work in a manner that meets and follows electrical codes, blueprints, and standards Test

As an Apprentice Electrician with the Tesla Energy Commercial Deployment team you will have the opportunity to work under the direction and supervision of a Licensed Electrician on all phases of commercial PV, energy storage and super charging stations: Skills in all areas of electrical are not nece

Valid California Electrician Certification.

Journeyman Electrician - Commercial. They are currently seeking certified Journeyman Electricians with at least 4+ years of experience for commercial project work. Certified Journeyman Electrician.

We are currently seeking a Journeyman Electrician! You will strive to provide safe electrical systems for a variety of customers.

Related keywords: electrical, electrician, commercial, industrial, commercial electrician, industrial electrician, apprentice, apprentice electrician, construction, new construction, install, project, on-site, safety, service, technician, skilled, skilled trade, craft, skilled craft. We are expandin

As a Solar Electrician (Journeyman) you are responsible for providing hands-on technical expertise to multiple PV plant sites on a continual/on-demand basis in order to meet all project maintenance requirements and troubleshoot/repair/resolve equipment issues such as emergency repairs and provide O&

We currently have immediate openings for Residential Electricians.

Electricians must provide proof of CA Journeyman Electrician certification. Journeyman Electrician will work on commercial and industrial construction projects (both private and public works). Electricians must be able to work in fast-paced environments while maintaining the accuracy and quality of

Field Service Engineer / Technician / Electrician. Medium/High Voltage Field Service Engineer/Technician/Electrician job responsibilities include:. Experienced professional service technicians, engineers, and/or electricians with current/prior field operations-related experience in servicing/trouble

We are seeking a skilled and experienced Journeyperson Electrician to join our team. Completion of an apprenticeship program or equivalent experience as an electrician. A valid electrician's license is required.

We are especially in need of foreman and supervisory level Journeyman electricians. Job Responsibilities for Commercial and Industrial Electrician:. Experienced Electricians Needed In Fresno, CA.

Journeyman Electrician - Industrial. They are currently seeking certified Journeyman Electricians with at least 4+ years of experience for industrial project work. Certified Journeyman Electrician.