Trabajos Engineering en Merrick, New York - Page 2Crear alertas

We are looking for a Senior Manufacturing Engineer for our Westbury, NY facility. \n \n Your Responsibilities: \n • Support production activities to achieve shipment schedules through the development and design of methods, processes, specifications, tooling, jigs, fixtures and/or equipment modification in conformance with basic and sound engineering principles, policies and practices.\n\n, • Assure most efficient, economic and productive plant layout, material flow and machine and labor utilization by planning the layout of factory machinery, the sequence of manufacturing operations and the specific procedures required for the fabrication, assembly and/or test of Component's Group products. Prepare and carry out plans to change part or material specifications, manufacturing methods, material or product routing, etc. and/or devise holding mechanisms and required tooling to facilitate product manufacture.\n, • Reduce the cost to manufacture products and increase current efficiencies through research of newer or advanced technologies and development of proposals for automation and/or the redesign of methods, tooling, machine attachments, etc. Also, efficient methodizing will reduce direct labor and, therefore, product cost. Prepare cost estimates involved in the changing from the present to new methods and estimate cost savings as the result of such changes. Recommend or determine the critical make or buy decisions on the basis of the Component's Group technical capabilities, equipment, labor and available capital.\n\n, • Assure production of quality parts, components and products by verifying machine, equipment and tool efficiency and performance. Investigate and initiate corrective action of problems or deficiencies\n\n, • Assure timely introduction of new products and/or methods by communicating and documenting required production operations through the preparation of operation sheets, manufacturing data base entries (ERP (Routings), (Setup sheet info.), (AutoDesk/AutoCad), visual aids and CNC programs if required. In addition, the Senior Manufacturing Engineer is expected to evaluate schedule milestones in early phases of design and prototype work, monitor costs, and assure quality and serviceability are considered during design and manufacture.\n, • Assist in the development and design of new products by providing advice on and determining the producibility of design concepts and the specification requirements that best utilize existing equipment, technologies and manufacturing techniques. In this capacity, the Manufacturing Engineer will inform design engineers of both manufacturing limitations and opportunities and will advise Manufacturing Engineering Management of new capabilities that competitive designs will require for the factory. Provide manufacturing input and provide a smooth transition into efficient production.\n\n, • Support production activities to achieve shipment schedules through the introduction of new technologies, the development and design of methods, tooling, jigs, fixtures and/or equipment modification in conformance with basic and sound engineering principles, policies and practices.\n\n, • Program CNC machines through CAD/CAM, Conversational or manual methods.\n, • Setup, prove-out, and optimize part manufacturing on CNC machines.\n\n, • Train other manufacturing personnel on programming and setup of CNC machines.\n \n Your Profile: \n\n • A Bachelor’s degree in Manufacturing Engineering or a related discipline or the equivalent in experience. \n, • Knowledge of CAD/CAM and a strong knowledge of CNC Programming are necessary. \n, • A full understanding of manufacturing process and the ability to fully apply the theories and concepts of manufacturing is essential.\n, • Typically, the degreed incumbent would require 4 - 5 years directly related experience to perform at this level. \n, • Ten years of varied machine shop, tool making.\n, • CNC programming and machining or other specialized manufacturing experience would be required for non-degreed employees to perform at this level.\n\n \n We offer: \n Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment! \n The perks and benefits of working at Oerlikon include the following: \n\n • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong. \n, • Excellent Dental and Vision coverage.\n, • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey. \n, • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals \n, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!\n, • Generous paid time off to support your physical and mental wellbeing.\n, • 12 paid company holidays to occasionally extend your weekends or time off. \n, • 100% company paid life insurance and disability insurance\n, • Employee Referral Bonus program because why not to bring your friends to work everyday!\n\n \n Why Oerlikon: \n Innovation and innovators thrive at Oerlikon, a leader in engineering solutions that enhance the performance of our products and services. We are diverse in our perspectives but united in our purpose: to develop technologies that reduce resource and energy consumption and help build a healthier, more sustainable and better protected world \n \n #joinoerlikonus #joinourteam \n \n Are you curious? Then release your passion to succeed and APPLY to discover how you can help us build a better world and realize how you can make a personal difference by joining our global team! Our commitment is your success! \n \n For individuals assigned, hired to work or working remotely in/out of California, Colorado, Connecticut, Illinois, Nevada, Washington State, or New York, Oerlikon is required by law to include a reasonable estimate of the current compensation range for this position, which is $110,000 to $130,000 per year. Some positions within Oerlikon may also offer eligibility to participate in a discretionary incentive program. The salary of the finalist(s) selected for the role will be based on a variety of factors that are considered in making compensation decisions including, but not limited to, internal equity, job location, work experience, education, training, certifications, licenses, etc. Therefore, as compensation decisions are dependent on the facts and circumstances of each individual, it is likely that not all applicants will be hired at the highest end of the listed compensation range. Our total compensation package goes beyond base compensation and it will include a competitive benefits package starting with 2 weeks paid time off accrued on a monthly basis, 12 holidays, 48 hours personal/sick time (exception for NY where we follow State law,) medical, dental, vision, 401K, holidays, pet insurance and tuition reimbursement all effective day one of hire. \n \n Agencies: \n Oerlikon only accepts agency resumes for positions that have been explicitly approved by HR for third-party support. We work exclusively with our approved vendors who have agreed to Oerlikon’s terms and conditions and have an executed contract in place. Any resumes or profiles submitted to Oerlikon employees for roles not approved and requested by HR will be considered unsolicited, and Oerlikon will not be obligated to pay a placement fee.

Job Description An established and leading Precision Timing & Frequency Technology Firm are looking for an Engineering Lab Manager Engineering Lab Manager is required to support the assembly/alignment/testing of RF/Microwave electronic component assemblies, starting with PC sub-assemblies to modules to system integration. Responsibilities: • Generation of in-process test procedures/data sheets for PCA’s, modules and top-level system testing., • Review of customer performance specifications (EQ spec) and customer supplied documents., • Top level system test requirements including Thermal Cycling, Thermal Vacuum, Vibration, Shock and EMI testing., • Generation of engineering required documentation:, • Test support for engineers, technicians, engineering associates., • Tools (universal for RF/Microwave assemblies., • Test equipment (specific to each program), • Technical understanding of typical system designs:, • Passive designs (power dividers, lowpass/highpass/bandpass filters, crystal filters., • Active designs (oscillators, amplifiers, multipliers, phase locked loops, mixers.etc.), • Familiarity with EEE parts selection, including characterization/evaluation, screening, traceability and derating requirements for space applications. Education and Required Skills: 10 years Engineering background, working in Product Lifecycle Management System Comprehensive Benefits Package: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including: Vacation, Sick and Paid Holidays

Implement tools to monitor and report on key quality metrics including defect rates, test coverage and test execution progress. Demonstrating expertise is a promise we uphold through continuous learning and engagement with our customers to consistently deliver top-quality products and services. Repo

Are you looking to Optimize your life? Start your exciting path to a rewarding career today!.We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a n

ABOUT The most secretive of Navy vessels, a submarine requires a select community of specially trained professionals to operate its classified, highly advanced hardware.The Sailors in the Submarine Electronics Computer Field (SECF) work with a submarine’s sonar, weapons, communications, and naviga

Collaborate with customers, sales, and internal stakeholders to gather and define market requirements and technical specifications for new product development. Drive and maintain regional product certifications by engaging with the regional certification bodies, regional sales teams, application eng

The Technology Software Engineer (Cloud Engineer) – supports IT Infrastructure platforms and technologies hosted on-premises and in AWS Virtual Private Cloud. This role is responsible for Cloud Engineering and will provide technical cloud engineering subject matter expertise for multiple technolog

Join Precipart as a CNC Process Engineer. Skillfully initiate and manage up to two CNC machines for precise engineering. Proven expertise in CNC operations.

Rocket is pushing the frontier of reusable rocket propulsion.We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines.Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines.Perform h

RLM Engineering is seeking an electrical engineer with experience in tenant fit-out, electrical upgrades, electrical infrastructure design and fire alarm systems for a wide variety of building/facility renovation projects. Bachelors Degree in Electrical Engineering or Equivalent. RLM Engineering is

Minimum of 5 years of experience as a Manufacturing Engineer or in a related role within a regulated manufacturing environment. Knowledge of medical device manufacturing standards and regulatory compliance. Strong knowledge of manufacturing processes, CNC machining, tooling design, and fabrication m

The BS Mechanical Engineering program at New York Institute of Technology is looking for adjunct professors to teach courses for this program, such as Material Science, Energy Systems. Mechanical Engineering or a related area. Adjunct Faculty- Mechanical Engineering.

Join us as a Component Engineer to lead electronic part control and innovation in cutting-edge technology projects! This Jobot Job is hosted by: Augie Ullmann Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $80,000 - $100,000 per year A bit about us: We are dedicated to advancing technology through meticulous control and management of electronic parts for high-stakes projects. Our team thrives on innovation and precision, ensuring the highest industry standards. Why join us? Engage in cutting-edge technology projects. Collaborate with a dynamic and skilled team. Access continuous learning and development opportunities. Be part of a company that values precision and quality. Enjoy a supportive work environment with room for growth. Job Details Job Details Control of Electronic Part Requirements: Generate Source Control Drawings (SCD’s) and review supplier control documentation to ensure compliance with program requirements. Inspection Data Review: Analyze incoming inspection data, including vendor/manufacturer QPL Certificates of Conformance and part-specific data packages. Discrepant Material Management: Generate and resolve Discrepant Material Reports (DMRs), coordinating with Engineering, Material Control, and Quality Assurance teams. Data Management: Maintain and manage electronic databases, such as Product Lifecycle Management systems (PLM) and Access Database. Part Performance Coordination: Work with Engineering, Material Control, and Quality Assurance to address part issues and performance requirements, including EEE parts selection, characterization, and evaluation. Education & Required Skills Bachelor of Science in Electrical Engineering (BSEE). 3-7 years of experience in Component Engineering. Proficiency in Microsoft Excel, Word, Access Database, and Product Lifecycle Management systems. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionDescription: Job Description: Responsible for the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Salary: $83,200.00/yr Availability: On Call 24/7 Essential Job Duties Under the Direction of the Director of Engineering and Operations: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Conduct, schedule and manage periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform and/or oversee electrical and plumbing repair and troubleshooting., 6. Perform and/or oversee mechanical projects., 7. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Troubleshoot, evaluate equipment/systems and recommend upgrades., 10. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 11. Order parts and supplies as required and maintain stock and inventory control., 12. Work with the Director of Engineering and Building Manager in planning and controlling annual and capital budgets., 13. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 14. Be familiar with and conform to all written operating procedures associated with site., 15. Ensure the cleanliness and appearance of all work areas., 16. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member with all staff, 17. Perform other duties as assigned. Skills, Education and Experience: · Minimum of five (5) years of experience in building operations, engineering and equipment and systems maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Strong customer service, communication and computer skills inclusive of payroll reporting · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders A detailed scope-of-work will be discussed during the interview process. The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Dental insurance, • Health insurance, • Paid time off Location: Long Island, New York Company: Harlequin Design New York Inc. About Us: Harlequin Design New York Inc. is a leading design and fabrication agency specializing in innovative solutions across various industries. We pride ourselves on our commitment to quality, creativity, and collaboration, creating exceptional designs that exceed client expectations. Job Description: We are seeking a talented SolidWorks Engineer to join our dynamic team. The ideal candidate will have a strong background in 3D modeling and engineering design, with a passion for creating precise and functional products. You will work closely with our design and fabrication teams to bring concepts to life and ensure the highest standards of quality and performance. Key Responsibilities: • Develop and modify 3D models and technical drawings using SolidWorks., • Collaborate with engineers and designers to translate concepts into detailed designs., • Conduct feasibility studies and simulations to optimize designs., • Prepare and maintain documentation related to design specifications and revisions., • Assist in prototyping and testing to validate designs and improve performance., • Provide technical support during the fabrication process and address any design-related issues., • Stay updated on industry trends and advancements in CAD technologies.Qualifications:, • Bachelors degree in Mechanical Engineering, Industrial Design, or a related field., • Proficiency in SolidWorks; additional CAD software knowledge is a plus., • Strong understanding of engineering principles, materials, and manufacturing processes., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team-oriented environment., • Effective communication skills, both written and verbal.What We Offer:, • Competitive salary and benefits package., • Opportunities for professional development and career growth., • A creative and collaborative work environment., • The chance to work on diverse projects that make an impact.

Job Description Our mission at iRocket is frequent, affordable access to space. We’re hiring a Launch Engineer to manage end-to-end launch operations, integration, vehicle readiness, and mission execution across sites. The Role • Support vehicle assembly, integration, test (AIT), rollout, countdown, and flight operations., • Develop check-lists, execute vehicle/pad/environment checkouts, manage anomaly response during launch campaigns., • Coordinate with propulsion, avionics, structures, safety, and logistics teams to ensure mission readiness., • Monitor launch-site infrastructure, support logistics, GSE, and range coordination., • Bachelor’s degree in Engineering or related field., • 3+ years of launch operations, systems integration, or mission-execution experience (space or defense sector preferred)., • Strong organizational, communication, and problem-solving skills; comfortable in high-stakes environments., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Description/Job Summary: The Building People, LLC, has a position open for General Maintenance Mechanic. The General Maintenance Mechanic operates and maintains one or more systems that provide an establishment with such services as heat, air-conditioning (cool, humidify, dehumidify, filter, and circulate air), refrigeration, steam or high temperature water or electricity. Duties involve: observing and interpreting readings on gauges, meters and charts which register various aspects of the system's operation, adjusting controls to insure safe and efficient operation of the system and to meet demands for the service provided, recording in logs various aspects of the system's operation, keeping the engines, machinery and equipment of the system in good working order. May direct and coordinate activities of other workers in performing tasks directly related to operating and maintaining the system or systems. Workers are required to be skilled in the repair of electronic control equipment; workers in establishments producing electricity, steam, or heated or cooled air, and Boiler Tenders. The primary duty of this position is to respond to emergency service calls and resolve emergency issues as necessary. This position requires work on holidays and weekends. Pay range - $48.00-55.00/hr + benefits Required Education: • American National Standards Institute/International Electrical Testing Association ETT-2015, • North American Technician Excellence (NATE) HVAC Service Technician Certification, • HVAC Excellence Professional Level Certification, • UA Star HVAC Mastery Certification, • Training from an accredited institution to maintain and operate boiler safety in, • accordance with New York State Department of Labor (NYS DOL).

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description RF Engineering Technician We are seeking a RF Engineering Technician to join our team in Farmingdale, NY. This hands-on role involves repairing and testing complex electronic equipment, including RF and microwave components. You’ll work closely with production, test, field service, and engineering teams to ensure equipment meets performance standards. Location: Farmingdale, NY Job Type: Permanent, Full-Time Schedule: 9/80 Work Week (Nine-hour days with alternating Fridays off) Key Responsibilities • Repair semi-complex electronic equipment such as printed circuit boards, multiplexing systems, and amplifiers, • Troubleshoot equipment using diagnostic tests to identify operational failures, • Reconstruct or replace defective parts and adjust mechanical components, • Review engineering change notices related to equipment design and operation, • Align, adjust, and calibrate equipment per specifications, • Apply coatings or paint to equipment components as needed, • Test equipment to ensure compliance with documented performance standards, • Maintain accurate records of repairs, calibrations, and tests in a computer database, • Provide technical support to internal departments during product investigations, • Associate’s or Bachelor’s Degree in Electronics or equivalent experience, • 1–3 years of experience as a repair technician, • Strong troubleshooting skills with RF and microwave components, • Proficiency with oscilloscopes, multimeters, and other test equipment, • Skilled in the use of hand tools, • Experience testing circuits, • Familiarity with engineering documentation and change notices, • Manufacturing floor setting with designated work benches and testing chambers, • Dedicated bench for individual tasks; occasional work in chambers depending on test requirements, • Collaborative team environment with support from leads and supervisors This is a Permanent position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $60000.00 - $60000.00/yr. Medical & Prescription Coverage Employees have access to a high-deductible comprehensive medical plan through BlueCross BlueShield, which includes: • Preventive care at no cost (e.g., routine exams, immunizations, cancer screenings), • Office visits, lab work, and diagnostic imaging with copays, • Emergency and urgent care services, • Inpatient and outpatient hospitalization, • Maternity care and newborn services Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on Nov 29, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionEngineering Lab Manager Needed For Leading Aerospace Manufacturer This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $125,000 - $150,000 per year A bit about us: We are dedicated to advancing technology through meticulous control and management of electronic parts for high-stakes projects. Our team thrives on innovation and precision, ensuring the highest industry standards. Why join us? Compensation Up To $150,000 Engage in cutting-edge technology projects. Collaborate with a dynamic and skilled team. Access continuous learning and development opportunities. Be part of a company that values precision and quality. Enjoy a supportive work environment with room for growth. Job Details Engineering Lab Manager is required to support the assembly/alignment/testing of RF/Microwave electronic component assemblies starting with PC sub-assemblies to modules to system integration. 1-Generation of in-process test procedures/data sheets for PCA’s, modules and top-level system testing. 2-Design and creation of system interface test fixturing. 3-Review of customer performance specifications (EQ spec) and customer supplied documentation: -Parts/Material/Process program requirements. -Top level system test requirements including Thermal Cycling, Thermal Vacuum, Vibration, Shock and EMI testing. 4-Generation of engineering required documentation: -Failure reports (if required) -Discrepant Material Report (DMR) -Recovery Test Plans. -Engineering change notices for customer review and internal component updates. -End Item Data Packages for submittal to customer for review and acceptance -Data management (storage and maintaining of test data for company review and accessibility) 5-Test support for engineers, technicians, engineering associates: a.Tools (universal for RF/Microwave assemblies) b.Test equipment (specific to each program) c. Equipment rental/purchase. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description The Project Engineer, with the assistance of the Project Team, coordinates all project activities to ensure cost, schedule, document control and quality standards are met. Under the direction of upper Management, the Project Engineer is expected to take on any/all tasks in the quest to learn the Electrical Construction Industry and the Company’s processes. Job Responsibilities: • Assisting with Design Work: Support more experienced engineers in designing electrical systems, components, etc. This may involve using software tools to create schematics, drawings, or models., • Documentation: Keeping accurate records and documentation is crucial in engineering. Entry-level engineers may be responsible for documenting their work, writing reports, and maintaining records of design specifications and test results., • Collaboration: Entry-level engineers often collaborate with other engineers, and project personnel from different disciplines to complete projects and solve problems., • Learning and Professional Development: Entry-level engineers spend time learning about the company's products, processes, and industry standards. They may also participate in training programs to enhance their technical skills and knowledge., • Fieldwork: Depending on the nature of the projects, entry-level engineers may have opportunities to visit job sites, participate in field installations, or assist in commissioning electrical systems., • Adhering to Codes and Standards: Entry-level engineers must familiarize themselves with relevant codes, standards, and regulations governing electrical design and installation to ensure that their work complies with legal and safety requirements., • Ability to work with a team., • Having organizational skills., • Ability to perform different tasks at the same time., • Having technical knowledge, • Ability to follow precise instructions., • Having IT skills with emphasis on Microsoft Office., • Being able to solve different types of problems., • Having good communication skills., • Being familiar with regulatory standards pertaining to the power industry., • Over 15 Years Owned and Operated, • Job training and mentorship, • Supportive Management Team, • Emphasis on professional development, employee satisfaction and work-life balance, • Competitive compensation packages, • Comprehensive benefits, • Paid holidays and vacation, • 401(k) match, • Medical Insurance, • Vision insurance, • Dental Insurance, • Union shopCompany DescriptionRMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.RMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.

Job DescriptionDescription: JOB TITLE: Quality Engineer Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment in innovation, quality, and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Quality Engineer to join our dynamic team and continue our mission of excellence. Job Summary: In this role, you will be responsible for ensuring safety and quality of our products and procedures through rigorous inspections, implementations of quality measures, and identification of areas for improvement. You will collaborate with cross-functional teams to address quality issues, drive continuous improvement, and contribute to building a high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering and/or quality assurance, exceptional attention to detail and a proactive mindset. If you are passionate about quality and delivering excellence, we encourage you to apply and become a valued member of the Quality team. Key responsibilities: · Set detailed guidelines on what needs to be checked and what the quality standards are. · Audit our systems based on ISO 9001: 2015 requirements. · Monitor the entire production cycle and perform regular tests to identify potential malfunctions as early as possible. · Inspect product materials and PCB for defects and durability. · Prepare reports on malfunctions and corrective actions (e.g. number of defective raw materials per order) · Review current blueprints and quality documentation · Work with internal teams to increase customer satisfaction by improving the quality of products. Required Qualifications: · Previous work experience as a Quality Engineer, Manufacturing Engineer, or similar role. · In-depth understanding of technical documentation · Able to create a technical document · Working knowledge of RCCA practice · Familiar with IPC610 and J-STD · Familiarity with statistical analysis · Great attention to detail and problem-solving abilities · Team Spirit · Great analytical skills · BSc in Mechanical Engineering, Industrial Engineering, or relevant field. (years of experience will be taken into consideration as a substitute for a BSc) · Additional certification in Quality Assurance is a plus. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description The Senior Controls Engineer is an integral part of Champion’s continued success in applying Process Automation and SCADA solutions. This critical, high-profile role is primarily focused on PLC control and SCADA data visualization; incorporating automation, energy monitoring and optimization system analytics. Responsibilities/Essential Functions: · Programming, configuring and maintaining PLC programs and SCADA objects in SCADA system that control and model field assets · Deploying and configuring SCADA objects to support data acquisition from field assets as they are brought online and changed in the field · Create and enforce project specific standards, augment and enhance solutions, benchmark individual and application performance metrics as well as estimate level of effort for initiatives. · Creation and binding of animated visualizations of system graphics and operator interface screens · Generating custom programming scripts to handle global functions · Create Submittals for projects · Commissioning and startup for instrumentation and controls projects Minimum Requirements: · BS in Engineering, Computer Science, or equivalent experience · Minimum of 10 years of experience with SCADA, PLC, and HMI applications · Field Experience in Starting up and commissioning Water, Waste water I&C projects · Experience with AutoCad · Proficiency reading and understanding electrical control schematics · Solid understanding of control and process logic, various communications protocols (Ethernet/IP, MODbus, TCP/IP), and network communications infrastructure · Experience in Factory Talk, Iconics Genesis, Wonderware, GE Fanuc Intellution/Proficy, Citect, Motorola Moscad /ACE 3600 applications · Experience writing control and ladder logic programming, basic scripts, and uploading programs to PLC. Development of HMI. PLC and HMI programming experience for Industrial Automation a plus · Experience with calibration, startup and commissioning of Industrial Instruments Company DescriptionChampion Controls is a leading control systems supplier providing system integration and engineering design services, as well as manufacturing of custom control panels for a variety of markets. We hold Underwriters Laboratory (UL) certifications for the USA and Canada as a manufacturer of industrial control panels, as well as industrial control panels relating to hazardous locations. We employ a staff of talented professional engineers, electrical technicians, and sales people, who can meet your project needs including providing turnkey installations.Champion Controls is a leading control systems supplier providing system integration and engineering design services, as well as manufacturing of custom control panels for a variety of markets. We hold Underwriters Laboratory (UL) certifications for the USA and Canada as a manufacturer of industrial control panels, as well as industrial control panels relating to hazardous locations. We employ a staff of talented professional engineers, electrical technicians, and sales people, who can meet your project needs including providing turnkey installations.

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionDescription: The candidate will support the electrical design and test of Rate and Rate Integrating Gyroscopes. This will include the design of electrical gyroscope components such as motors, pickoffs and torquers, as well as custom built test fixtures and test harnesses. In addition, the candidate will assist in the design of tests and provide analytical support for testing Rate and Rate Integrating Gyroscopes, including Acceptance Test Procedures (ATP), scale factor, transfer function, drift, alignment, and 1st and 2nd order system stability characteristics (gain/phase analysis), etc. EDUCATION: Minimum 4-year degree in electrical or electronics engineering, or other technical degree with appropriate work history or background. EXPERIENCE: 5+ years dealing with four or more of the following: Electronic product or component design and/or analysis Basic understanding of 1st or 2nd order control systems (servo systems, spring/mass/damper) Electronics systems (amplifiers, power supplies, demodulators, signal conditioning, filters) Electromechanical, mechanical, or electromagnetic systems Engineered (specialized) products to customer/government specifications Custom (product specific) Test systems Environmental testing (temperature, shock, vibration as a minimum) Hands-on design, test, and troubleshooting experience required SKILLS: Required skill set shall include as a minimum: Can interpret, digest, and produce technical specifications and procedures Computer literacy Excellent communications, presentation, and written skills, including customer facing Analytical (math) modeling capability, 1st and 2nd order systems Electrical test equipment operation skills, e.g.; DVM, oscilloscope, signal generator PC Board design Analog circuit design and component selection Servo (control system) analysis, and system design (1st and 2nd order systems), gain/phase analysis Additional skills desirable: Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment Microcontroller/microprocessor based digital and/or mixed signal circuit and system design Magnetic circuit analysis and design capability Basic mechanical instruments skills, e.g.; micrometers, calipers, dial indicators, precision levels An outstanding self-starter with a can-do attitude willing to go above and beyond the normal Requirements:

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free uniforms, • Health insurance, • Develop detailed technical drawings and specifications for retail window displays and pop ups., • Ensure that all project builds are designed with Health and Safety at the forefront of your mind., • Providing Build Drawings and CNC files., • Liaising with Project Managers on project requirements and deadlines.- Work closely with the Production Team to ensure that designs can be efficiently and accurately produced. • Conduct regular quality checks on prototypes and final products to verify accuracy and adherence to design specifications., • Participate in meetings with clients to present technical drawings and discuss project requirements. • Work closely with the design team whilst designing a project for a client. Ensuring that what is designed is achievable in project guidelines, budgets and timelines - whilst also thinking about whats best for the client., • Identify opportunities to streamline processes, improve efficiency, and enhance the overall quality of drafting work., • Proactively seek feedback and implement best practices to support ongoing learning and professional development.Qualifications: • 5+ years of experience in technical drafting for retail window displays and pop ups., • Must use SolidWorks or Inventor, • Proficiency in CAD software such as SolidWorks or Rhino., • Strong understanding of manufacturing processes and materials. • Excellent management skills with the ability to prioritize tasks and meet deadlines., • Detail-oriented mindset with a focus on quality assurance and continuous improvement.- Strong communication and interpersonal skills to collaborate effectively with cross-functional teams. • Ability to problem solve and troubleshoot technical issues as they arise., • Knowledge of health and safety regulations in the retail industry. If you have a passion for creative design and a strong technical background, we invite you to apply for this exciting opportunity to lead a dynamic team in designing innovative retail displays.

Job Description A leading aerospace and RF/microwave technology manufacturer in the Hauppauge region is hiring a Sr. Specialist, Quality Engineering to support and strengthen its AS9100 Quality Management System. This person will work across Engineering, Operations, Supply Chain, Production, and Customer Service to maintain compliance, lead audits, resolve nonconformances, and drive continuous improvement initiatives. This role is ideal for someone who thrives in a fast-paced engineering environment, enjoys solving complex problems, and can confidently interface with customers, suppliers, and internal teams. Key Responsibilities • Support and maintain the AS9100 Quality Management System, • Lead and participate in daily cross-functional quality issue resolution, • Analyze data, assess processes, and implement continuous improvement initiatives, • Report quality metrics, trends, and findings to the Quality Manager, • Perform root cause analysis using 5-Why and Fishbone methods, • Drive corrective and preventive actions: CARs, SCARs, customer complaints, failure reports, • Lead Material Review Board (MRB) activities, • Conduct AS9102 First Article Inspections, • Guide external audits, support customer source inspections, and complete FAI documentation, • Serve as primary contact for customer and supplier quality matters, • Lead supplier evaluations, audits, and corrective action follow-up, • Conduct internal audits and coordinate cross-functional corrective actions, • Create, document, and improve QMS procedures and work instructions, • Support AS9100 training, internal/external audits, and compliance activities, • Bachelor’s degree in Engineering, • 6+ years of quality engineering experience (or 4+ with a Master’s), • Strong AS9100 background, • Experience with microelectronics, RF/MW products, or precision electromechanical systems, • Ability to read mechanical blueprints and understand tolerances, • Experience with Mil-Std-883, IPC-A-610, J-STD-001, • AS9102 FAI experience, • Strong communication skills with customer and executive interaction, • Experience supporting DCMA or government quality audits, • Ability to perform contract flow-down interpretation, • Lean Six Sigma training or certification, • Ability to obtain/maintain DoD Secret clearance, • Supplier quality audit experience, • US citizenship or US Person status required due to export control regulations, • Pre-employment background check and substance screening may be required, • Equal Opportunity Employer, • This position requires onsite work due to hands-on quality functions

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Service Technician Caterpillar Natural Gas Engines Salary: $40.00 – $55.00/hr, based on experience and certifications Location: Garden City, New York OUR CLIENT On behalf of our client, we are seeking an experienced Service Technician for Caterpillar engines and commercial generator systems in Garden City, NY. This is an opportunity to work at the forefront of advanced energy solutions with a focus on Caterpillar (including G3508) and Waukesha natural gas generators, heavy-duty diesel/portable engines, and alternative fuel technology. This role offers hands-on technical challenges, career growth potential, and a chance to directly advance sustainable energy infrastructure. THE IDEAL CANDIDATE * Minimum 2 years of experience working with Caterpillar engines (with emphasis on G3508 series), Waukesha NG engines, portable diesel engines, power generators, and commercial generator systems. * Strong background in troubleshooting, maintaining, and repairing natural gas and diesel generators, including cooling, lubrication, and electrical subsystems. * Ability to read and interpret electrical and mechanical schematics, diagnose/resolve faults, and execute complex repairs and precision adjustments (high-pressure gas systems experience is an asset). * Electrical expertise: maintain/troubleshoot panels, wiring, motors, and controls for safe and efficient operation. * Mechanical expertise: repair compressors, pumps, piping, valves, actuators; oversight of heat exchangers and system optimization. * Experience with CNG, RNG, or hydrogen station inspections and general maintenance highly valued. * Familiarity with documentation and compliance in regulated environments, ability to log service data and adhere to all safety standards. * Valid driver's license required; must be able to travel between sites and support an on-call rotation. * Physically capable of frequently lifting up to 50 lbs and occasionally up to 75 lbs, and comfortable with frequent walking, climbing, and outdoor work. WHAT'S IN IT FOR YOU? * Competitive, experience-based hourly pay ($40–$55/hr), with comprehensive benefits (medical, dental, vision). * Tool and uniform allowance, company-provided equipment. * Innovative, safety-focused work environment surrounded by passionate professionals. * Training in alternative fuels (CNG, RNG, hydrogen) and cutting-edge Caterpillar/Waukesha engine systems. * Opportunities for advancement and skill development as part of a leader in sustainable energy solutions. WHAT TO DO NOW If you have the required qualifications and want to energize your career working on Caterpillar and Waukesha engines for critical green-energy infrastructure in New York—apply now. Please note: Only candidates selected for an interview will be contacted due to the volume of interest. Keywords: Caterpillar G3508, Waukesha NG engines, diesel generators, CNG station, RNG, heavy equipment, generator technician, Garden City jobs, service technician, alternative fuel systems, New York energy jobs.

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Manufacturing Engineer (Medical Device Manufacturing, Process Engineering, Continuous Improvement) About the Role: This Manufacturing Engineer position offers the opportunity to play a key role in the production of advanced medical devices and precision-engineered components. The role focuses on optimizing manufacturing processes, enhancing production efficiency, and ensuring product quality in a regulated environment. The Manufacturing Engineer will collaborate across engineering, operations, and quality teams to develop, implement, and continuously improve processes that meet industry standards and safety requirements. Responsibilities: * Design, implement, and optimize manufacturing processes to improve efficiency, quality, and safety. * Develop and validate automated and manual production systems to ensure repeatable and compliant outcomes. * Evaluate manufacturing performance using metrics such as throughput, yield, and cost efficiency. * Provide accurate cost estimates for new and existing projects, supporting pricing and resource planning. * Plan and improve factory layouts, material flow, and equipment utilization for optimal productivity. * Collaborate with cross-functional teams to troubleshoot issues, resolve production bottlenecks, and reduce waste. * Train operators and technicians on new equipment, tooling, and process updates. * Maintain compliance with ISO, FDA, and environmental health and safety standards. * Research and recommend new technologies to advance manufacturing capabilities. * Lead or assist with continuous improvement initiatives and lean manufacturing projects. Qualifications: * Minimum of 5 years of experience as a Manufacturing Engineer or in a related role within a regulated manufacturing environment. * Bachelors degree in Mechanical Engineering, Manufacturing Engineering, or a related field. * Strong knowledge of manufacturing processes, CNC machining, tooling design, and fabrication methods. * Proficiency with CAD software and Microsoft Office Suite. * Proven project management and process improvement experience. * Excellent problem-solving skills and a data-driven approach to decision-making. * Familiarity with quality systems, statistical process control, and root cause analysis. * Commitment to maintaining high safety, quality, and environmental standards. Desired Qualifications: * Green Belt or Lean Six Sigma certification. * Hands-on experience with continuous improvement methodologies and lean manufacturing tools. * Knowledge of medical device manufacturing standards and regulatory compliance. * Experience leading cross-functional teams in a fast-paced production environment. * Strong communication and collaboration skills across departments. (Must be authorized to work in the United States. Sponsorship is not available for this role.)

Job Description Job description Golden Glow Architectural Studios is a professional design services corporation that provides building code and zoning analysis, per-construction services, tenant protection plans and drafting services in New York City. We provide our clients with in-depth analyses and conduct phased plan reviews from schematic design through construction documents. The ideal candidate will exhibit high standards, excellent communication skills, and have an ability to take initiative, and prioritize daily tasks. A strong ability to take charge and meet tight deadlines will ensure your success in this multi-faceted role. All are encouraged to apply. Responsibilities • Ensuring overall design intent of the project team is incorporated into the detailed documentation., • Monitors the design process from conceptual phase through construction administration, ensuring the design idea is consistent and properly executed., • Preparing Façade Repair Drawings, both individually and with the assistance of our drafting team, as scheduling and company workload requires, • Plans and develops projects of various sizes and works under supervision, • Investigates, evaluates, and recommends design solutions, prioritizes work, receives guidance on complex issues, • Assisting the owner with bid, negotiation, and award of contractors: (1) façade repair, sidewalk shed and adjacent property protection contractors; and (2) where we are contracted as the Construction Manager on non-LL11 projects., • Participates in construction administration by reviewing shop drawings and submittals, responding to RFI’s, working to solve construction issues, and performing site visits to assess general conformance with the design concept, • Strong drafting skills -able to self-perform and guide staff junior architects in the production of construction documents, • Familiarity with NYC agencies having jurisdiction – primarily DOB, FDNY, DOT, DPR and DCP, assist in building code and zoning reviews when needed., • Assists with marketing and business development activities, • Coordinating the work of junior professionals and technicians, • Consistently reviews work and communicate needs and concerns to project staff., • Bachelor's degree or equivalent experience, • Architecture registration required., • Strong interpersonal, customer service, writing, and communication skills., • Good understanding of construction, building codes and zoning, • Experience in architecture including project and construction documentation., • Ability to work on multiple, fast-paced projects and documents., • Experienced in Revit and AutoCAD software, • Architecture & Planning We offer a comprehensive benefits package that includes medical, dental, vision, FSA and 401(k). We are an equal opportunity employer.

Job Description Job Description Schivo Medical in Plainview, New York manufactures a diverse range of essential medical technology solutions. Working with us, you will be apart of the manufacturing process of a vast array of different products including robotic surgery instruments medical devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will work with a team of professionals that are committed to helping create parts that save lives and help assist you with a fulfilling and rewarding career. Senior Manufacturing Engineer job summary: A Manufacturing Engineer is responsible for designing, implementing, and reviewing the procedures and equipment involved in the manufacturing process. Their duties include researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Senior Manufacturing Engineer Necessary Education, Skills, and Competencies (including licensing and certifications): • 10 years of work experience as a manufacturing engineer or similar role needed, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g. CAD, MS Office), • Project management skills, • Problem-solving ability, • Teamwork skills, • Degree in Mechanical Engineering or related field(CNC Machining), • Green belt certificate a plus, • Working knowledge with continuous improvement process Senior Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, test, and implement manufacturing process., • Study production and machine requirements, • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Develop and mentor Junior engineers, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with new technology Benefits: • Employee referral, • 401(k), • 401(k) matching, • Dental insurance, • Vision insurance, • Life Insurance, • Employee assistance program, • Health insurance, • Paid time off, • Referral program * Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description A confidential, industry-leading RF/microwave manufacturer is looking for an experienced RF Amplifier Design Engineer to design, develop, and test low noise and medium power amplifiers using both discrete transistor and MMIC technologies. You’ll work across hybrid and surface-mount designs, run linear and nonlinear simulations, support production, and contribute directly to new product development. This is a hands-on engineering role with real visibility inside the organization. What You’ll Do * Design, develop, and test discrete and MMIC-based low noise/medium-power amplifiers * Build new RF and microwave circuits, components, and products * Perform linear and nonlinear simulations for active and passive circuits * Define specs for microwave components and subassemblies * Support high-reliability testing and screening requirements * Generate design reviews, test reports, and documentation * Work with manufacturing teams to ensure efficient build processes * Estimate project schedules, track engineering labor, and support technical proposals What You Need * Bachelor’s in Electrical Engineering with 4+ years experience, or Master’s with 2+ * At least 2 years designing and simulating low noise amplifiers * Experience designing passive RF/microwave components (couplers, dividers, attenuators) * Experience designing for manufacturability and managing engineering projects * Proficient with linear CAE tools plus exposure to nonlinear CAE * Hands-on lab/test experience: VNAs, noise figure analyzers, spectrum analyzers, power meters, signal generators * Ability to work under a microscope in a cleanroom environment * Familiarity with semiconductor devices like GaAs and GaN * Strong communication skills * Must be able to obtain a Secret-level security clearance Preferred Experience * Familiarity with MIL-specs: MIL-PRF-38534, MIL-STD-202 * Experience aligning and tuning fine-pitch circuits under a microscope * Knowledge of oscillator, synthesizer, PIN-diode, and filter design * System-level cascade and spur analysis * Proficiency with Keysight ADS, RFPro, Ansys HFSS, and EM simulation tools * CAD familiarity: AutoCAD, Inventor * Design/test experience up to 26 GHz or higher (40 GHz preferred) * Hybrid chip-and-wire and PCB SMT manufacturing exposure * Wire bonding experience

Job Description We are looking for a Tier 2 Linux Engineer to join our onsite team in Westbury, Long Island. This full-time, hands-on role is perfect for someone with strong Linux experience who enjoys working in dynamic environments and solving real-world technical problems. Responsibilities: • Provide Tier 2 support for Linux-based systems (primarily Ubuntu, CentOS, RHEL), • Troubleshoot OS, application, and networking issues across production and internal systems, • Manage user accounts, permissions, and system configurations, • Maintain and configure services such as Apache/Nginx, SSH, DNS, DHCP, MySQL/PostgreSQL, • Monitor system performance and security using standard tools (e.g., top, journalctl, fail2ban), • Assist with backup, patching, and scripting for automation, • Collaborate with other engineers and escalate issues as needed Requirements: • 3+ years of hands-on Linux system administration experience, • Proficiency with command line tools, shell scripting (bash), and standard Linux utilities, • Solid understanding of TCP/IP, DNS, routing, and basic firewall rules (iptables or ufw), • Ability to troubleshoot services, logs, and performance issues, • Strong communication and documentation skills, • Must be able to work onsite daily in Westbury, NY, • 4 days (32 hours) per week including evenings and weekends., • Reliable transportation is required Preferred Qualifications: • Experience with automation tools (e.g., Ansible, Puppet, cron scripting), • Familiarity with cloud platforms (AWS, Azure, GCP), • Experience with containers (Docker) or virtualization (KVM, VMware) Full benefits package, including: • $42/Hour + overtime pay, • Medical, dental, and vision insurance, • Retirement plan, • Paid time off and holidays, • Certification reimbursement and professional development, • Contract engagement terms available at a higher rate of pay.

Job Description Interested in the opportunity for a great career as a utility locator, with no experience or advanced degree required? Join T2 Utility Engineers (T2ue) in Oceanside, NY as part of our Subsurface Utility Engineering (SUE) field tech team. Our entry-level SUE field techs gain on-the-job training in utility locating and utility designating, along with knowledge and experience in Subsurface Utility Engineering and surveying methods and technology. When you join our field tech team, you’re not confined to an office. T2ue provides you with outstanding benefits and an opportunity for a great career with room for advancement. Are you self-motivated and interested in learning? We’re looking for people interested in advancing and building a career with the leader in the utility locating industry. You don’t need experience in our industry to join our team. We’ll provide training, you provide the initiative to build a career with us. Since 1993, T2 Utility Engineers has provided professional Subsurface Utility Engineering, UC, and surveying services in support of infrastructure projects of all sizes and types. Using advanced technologies, our team of field technicians, engineers, and surveyors, provide quality data and professional insight to help our clients visualize, plan, and design their projects. Our mission is to provide project stakeholders with quality information, professional insight and deliverables that streamline construction, improve project safety and set the standard for the engineering industry. SUE Technician I responsibilities include, but are not limited to: • Learn the operation of SUE utility locating and designating equipment, including pipe and cable locators and non-destructive vacuum excavation, • Use of tools and equipment to conduct utility investigations, including jackhammer, pogo-tamper, concrete saw, compressor blower, vacuum hose, air lance, and hand tools, • Drive commercial motor vehicles, however a CDL license is not required, • Complete daily logs of work performed, which includes simple mathematics, • Perform daily basic vehicle maintenance, • Perform safety set-up and maintenance of traffic operations under direct supervision of senior field staff, • Assist with survey and data collection tasks, supporting overall crew activities, • Perform daily routine maintenance of equipment Tech I Qualifications: • High School Diploma/GED, • Valid driver's license with good driving record, • Ability to pass a pre-employment physical (U.S. only), • Ability to obtain a DOT medical card for CMV operation (U.S. only), • Ability to lift 50 lbs. and perform physical movements necessary to operate heavy tools and equipment, • Ability to work outdoors in all climates, • Willingness to travel up to 50% of the time, by company vehicle or commercial airline, up to 2 week continuous stay., • Must have a good oral communication skills and attention to detail, • OSHA Safety certifications are a plus, • Prior utility related experience is a plus, • Basic understanding of Highway/Utility plans is a plus, but not required We Offer a Complete Benefits Package! In addition to the opportunity to grow and advance, we offer competitive salaries, paid training, and comprehensive benefits with options to meet your needs, including; • Paid time off, • Paid overtime, • Paid holidays, • Company provided cell phone or cell phone allowance, • Boot and clothing allowance, • Generous daily food and incidentals allowance when overnight travel is required, • Medical and prescription drug coverage – multiple plan options, • Flexible Spending (FSA), Dependent Care (DCA), or Health Savings (HSA) accounts, • Dental, • Vision, • Wellness and Employee Assistance Programs, • Parental, Family and Medical leave, • 401-K retirement plan w/company match, • Life insurance, • Short / long term disability, • Tuition reimbursement, • Spot and annual bonus incentives, • Employee discounts and perks, • Please Note that selected candidates will be required to pass a drug, background, and reference screening. T2 Utility Engineers is an equal opportunity employer. We are committed to an inclusive, equitable and accessible workplace. Qualified applicants will receive consideration for employment without regard to race, color, citizenship, creed, sex, sexual orientation, gender identity, gender expression, age, marital status, family status or disability. If you require an accommodation at any time during the recruitment or application process, please contact Human Resources. T2 Utility Engineers does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any T2 Utility Engineers employee. Resumes from approved vendors must be specifically requested by T2 Utility Engineers and approved by the T2 Utility Engineers Talent Acquisition Team.

Job Description Position Description: Seeking a motivated, intelligent and hard-working individual to Develop and maintain quality and regulatory compliance in Genadynes' processes. Individual will ensure compliance with ISO 13485 and MDSAP requirements are maintained. Specific Responsibilities : Ensure the quality and processes are practiced and maintained. Compile documents required for audits. Create and maintain product technical files. Initiate corrective and preventive actions for non-conformities. Maintain/calibrate the accuracy of all testing equipment. Conduct risk assessments of medical devices and processes. Maintaining the effectiveness of quality control system and non-conforming materials control system. Discuss and solve quality problems with vendors. Investigate problems and make improvement on current processes. Develop/design effective test methods. Facilitate software design and development for medical devices. Performance testing and reporting on software, hardware and the compatibility for all accessories. Perform risk assessments for medical devices and accessories. Development and prototyping of new products with existing or new vendors. Abilities: Familiar with FDA CFR 820, ISO 134850, SOPs regulations. Extreme attention to details. Ability to think outside the box with excellent problem solving abilities. Excellent interpersonal, communication, and writing skills. Highly organized. Excellent computational skills. Knowledge of European regulations is a plus. Knowledge of common medical materials (silicone, polyurethane, etc.) Knowledge of electrical circuits and basic programming. Knowledge of C/C++ is a plus. Maintain MDD/MDR EN ISO Experiences: Regulatory compliance. Quality management. Cross functional team management. Quality assurance Requirements: Bachelor degree in mechanical, electrical, material, biomedical engineering or relative field. (Master degree preferred.) Benefits: Medical, Dental, Vision, PTO, 401K, Legal Services, FSA, Life Insurance Salary Range: $68,000 - $72,000/Annual Powered by JazzHR oSPuR7OKHc

Job Description The Chief Engineer is responsible for ensuring proper operations, maintenance, service and repair of all equipment, while supporting the Hilton and LMG, goals of guest satisfaction, cost control and profitability. He/she is also responsible for overseeing and participating in the Preventative Maintenance program, ensuring that all rooms and public space meet Hilton standards. Management level associates are expected to work as much of each workday as is necessary to complete their job responsibilities. Exempt managers must customarily and regular direct the work of at least 3 full-time associates or their equivalents. Primary duties must consist of administrative, executive, or professional tasks more than 50 percent of the time and job duties must also involve the use of discretion and independent judgement more than 50 percent of the time. Education & Experience • High School diploma or equivalent required. • At least 5 years of progressive experience in a hotel or a related field; or a 2-year college degree and 3 or more years of related experience; or a 4-year college degree and at least 2 years of related experience. • Supervisory experience required. • Current Certification as required by Federal, State or Local governing agents pertaining to trade requirements (i.e. HVAC, pool operation, electrical), property specific. • Current certification and licensing to operate and repair the hotels boilers and chillers as required by state, city, and local legislation. • Must have a valid driver's license for the applicable state. • Must be able to convey information and ideas clearly. • Must be able to evaluate and select among alternative courses of action quickly and accurately• Must work well in stressful, high pressure situations. • Must maintain composure and objectivity under pressure. • Must be effective in handling problems in the workplace, including anticipating, preventing, identifying and solving problems as necessary. • Must have the ability to assimilate complex information, data, etc. from disparate sources and consider, adjust or modify to meet the constraints of the particular need. • Must be effective at listening to, understanding, clarifying and resolving the concerns and issues raised by coworkers and guests. • Must be able to work with and understand financial information and data, and basic arithmetic functions. Job Duties & Functions • Assist with the operation, maintenance and repair of equipment. • Change out light bulbs; perform preventative maintenance for guest rooms to include: vinyl repair, touch up paint, minor furniture repair, tub caulking, tile repairs, etc. • Perform preventative maintenance for ice machines, refrigerators, kitchen equipment, laundry equipment, HVAC, guestrooms, meeting rooms, the swimming pool and hot tub. • Perform plumbing repair, laundry equipment repair, preventative maintenance on all exhaust fans and supply; monitor energy conservation; repair vacuum cleaners and any other small equipment upon request. • Immediately follow up on any alarms to determine the exact location and cause - determine emergency status and report to the Front Desk with findings. • Perform other tasks/jobs as assigned by the supervisor or manager. This job description is not intended to be all-inclusive, additional details will be specified by the General Manager. Management reserves the right to change this job description, job responsibilities, duties, and working hours as needs prevail. If requested in accordance with applicable law, the Company provides reasonable accommodation to known physical or mental limitations of an otherwise qualified associate with a disability to allow him/her to perform essential functions of the job unless the accommodation would impose an undue hardship on the Company. Levine Mgmt Group LLC is an at-will employer. This job description is a guideline and does not constitute a written or implied employment contract.

Job Description Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for you to join our collaborative team as a Design Engineer. This is a full-time, on-site role. Primary Functions Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Salary commensurate with experience (Range from $45,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K, • EAP Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels., • Design and layout of electrical panels using AutoCAD., • Ensure that all panels are being designed and constructed to UL Standards., • Creating Bill of Materials for the sales engineer team., • Create testing procedures for specific projects to be used by shop personnel., • Determine parameters to program variable frequency drives and soft starters., • 3 years+ experience in the design of electrical system preferred, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Some Minor Lifting and Moving of Parts and Equipment We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionTech/Electronics company located in Plainview NY is looking for a Production Engineer to join their team. Full benefits including 26 days off the first year and bonus. Being the Production Engineer, you will help with the engineering and quality agenda with the overall goal to improve the customer satisfaction. You are the main contact towards the suppliers and work as part of the business team together with the supplier to develop and secure the production process, handling of quality deviations, and secure compliance to all company requirements. About the assignment: The Production Engineer is responsible for Quality Assurance including to secure process control for key processes in production. Among other things, you:• Develop new manufacturing processes, and equipment to ensure manufacturing is efficient and effective.• Investigate and analyze problems and derive solutions in the manufacturing process.• Transfer R&D prototypes into series production phase and document the manufacturing processes.• Perform and create First Article Inspection Documents. • Perform Product audits and production risk assessments at suppliers • Develops the recipe with suppliers to match desired taste profile quality and nutrition. • Lead the Supplier Development for quality and manufacturing with responsibility to identify and implement actions and execution of SDP projects. • Lead industrialization of minor news development and contribute with competence to other new developments. Knowledge about Total Quality Management - University degree in Engineering or correspondingPrevious experience as Process or Production Engineer in manufacturing PreferredExperience of industrial production conditions and Lean manufacturing Contact Michael Panter for more details: