Trabajos Engineering en East Meadow, New YorkCrear alertasJornada completa

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Interested in the opportunity for a great career as a utility locator, with no experience or advanced degree required? Join T2 Utility Engineers (T2ue) in Oceanside, NY as part of our Subsurface Utility Engineering (SUE) field tech team. Our entry-level SUE field techs gain on-the-job training in utility locating and utility designating, along with knowledge and experience in Subsurface Utility Engineering and surveying methods and technology. When you join our field tech team, you’re not confined to an office. T2ue provides you with outstanding benefits and an opportunity for a great career with room for advancement. Are you self-motivated and interested in learning? We’re looking for people interested in advancing and building a career with the leader in the utility locating industry. You don’t need experience in our industry to join our team. We’ll provide training, you provide the initiative to build a career with us. Since 1993, T2 Utility Engineers has provided professional Subsurface Utility Engineering, UC, and surveying services in support of infrastructure projects of all sizes and types. Using advanced technologies, our team of field technicians, engineers, and surveyors, provide quality data and professional insight to help our clients visualize, plan, and design their projects. Our mission is to provide project stakeholders with quality information, professional insight and deliverables that streamline construction, improve project safety and set the standard for the engineering industry. SUE Technician I responsibilities include, but are not limited to: • Learn the operation of SUE utility locating and designating equipment, including pipe and cable locators and non-destructive vacuum excavation, • Use of tools and equipment to conduct utility investigations, including jackhammer, pogo-tamper, concrete saw, compressor blower, vacuum hose, air lance, and hand tools, • Drive commercial motor vehicles, however a CDL license is not required, • Complete daily logs of work performed, which includes simple mathematics, • Perform daily basic vehicle maintenance, • Perform safety set-up and maintenance of traffic operations under direct supervision of senior field staff, • Assist with survey and data collection tasks, supporting overall crew activities, • Perform daily routine maintenance of equipment Tech I Qualifications: • High School Diploma/GED, • Valid driver's license with good driving record, • Ability to pass a pre-employment physical (U.S. only), • Ability to obtain a DOT medical card for CMV operation (U.S. only), • Ability to lift 50 lbs. and perform physical movements necessary to operate heavy tools and equipment, • Ability to work outdoors in all climates, • Willingness to travel up to 50% of the time, by company vehicle or commercial airline, up to 2 week continuous stay., • Must have a good oral communication skills and attention to detail, • OSHA Safety certifications are a plus, • Prior utility related experience is a plus, • Basic understanding of Highway/Utility plans is a plus, but not required We Offer a Complete Benefits Package! In addition to the opportunity to grow and advance, we offer competitive salaries, paid training, and comprehensive benefits with options to meet your needs, including; • Paid time off, • Paid overtime, • Paid holidays, • Company provided cell phone or cell phone allowance, • Boot and clothing allowance, • Generous daily food and incidentals allowance when overnight travel is required, • Medical and prescription drug coverage – multiple plan options, • Flexible Spending (FSA), Dependent Care (DCA), or Health Savings (HSA) accounts, • Dental, • Vision, • Wellness and Employee Assistance Programs, • Parental, Family and Medical leave, • 401-K retirement plan w/company match, • Life insurance, • Short / long term disability, • Tuition reimbursement, • Spot and annual bonus incentives, • Employee discounts and perks, • Please Note that selected candidates will be required to pass a drug, background, and reference screening. T2 Utility Engineers is an equal opportunity employer. We are committed to an inclusive, equitable and accessible workplace. Qualified applicants will receive consideration for employment without regard to race, color, citizenship, creed, sex, sexual orientation, gender identity, gender expression, age, marital status, family status or disability. If you require an accommodation at any time during the recruitment or application process, please contact Human Resources. T2 Utility Engineers does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any T2 Utility Engineers employee. Resumes from approved vendors must be specifically requested by T2 Utility Engineers and approved by the T2 Utility Engineers Talent Acquisition Team.

Job Description Service Technician Caterpillar Natural Gas Engines Salary: $40.00 – $55.00/hr, based on experience and certifications Location: Garden City, New York OUR CLIENT On behalf of our client, we are seeking an experienced Service Technician for Caterpillar engines and commercial generator systems in Garden City, NY. This is an opportunity to work at the forefront of advanced energy solutions with a focus on Caterpillar (including G3508) and Waukesha natural gas generators, heavy-duty diesel/portable engines, and alternative fuel technology. This role offers hands-on technical challenges, career growth potential, and a chance to directly advance sustainable energy infrastructure. THE IDEAL CANDIDATE * Minimum 2 years of experience working with Caterpillar engines (with emphasis on G3508 series), Waukesha NG engines, portable diesel engines, power generators, and commercial generator systems. * Strong background in troubleshooting, maintaining, and repairing natural gas and diesel generators, including cooling, lubrication, and electrical subsystems. * Ability to read and interpret electrical and mechanical schematics, diagnose/resolve faults, and execute complex repairs and precision adjustments (high-pressure gas systems experience is an asset). * Electrical expertise: maintain/troubleshoot panels, wiring, motors, and controls for safe and efficient operation. * Mechanical expertise: repair compressors, pumps, piping, valves, actuators; oversight of heat exchangers and system optimization. * Experience with CNG, RNG, or hydrogen station inspections and general maintenance highly valued. * Familiarity with documentation and compliance in regulated environments, ability to log service data and adhere to all safety standards. * Valid driver's license required; must be able to travel between sites and support an on-call rotation. * Physically capable of frequently lifting up to 50 lbs and occasionally up to 75 lbs, and comfortable with frequent walking, climbing, and outdoor work. WHAT'S IN IT FOR YOU? * Competitive, experience-based hourly pay ($40–$55/hr), with comprehensive benefits (medical, dental, vision). * Tool and uniform allowance, company-provided equipment. * Innovative, safety-focused work environment surrounded by passionate professionals. * Training in alternative fuels (CNG, RNG, hydrogen) and cutting-edge Caterpillar/Waukesha engine systems. * Opportunities for advancement and skill development as part of a leader in sustainable energy solutions. WHAT TO DO NOW If you have the required qualifications and want to energize your career working on Caterpillar and Waukesha engines for critical green-energy infrastructure in New York—apply now. Please note: Only candidates selected for an interview will be contacted due to the volume of interest. Keywords: Caterpillar G3508, Waukesha NG engines, diesel generators, CNG station, RNG, heavy equipment, generator technician, Garden City jobs, service technician, alternative fuel systems, New York energy jobs.

Help Us Transform the Pharmaceutical Claims Industry InfinityRx is a health-tech startup on a mission to modernize pharmaceutical claims processing through cutting-edge cloud technology. Our flagship product, the InfinityRx Claims Processor™ (ICP), is redefining how claims are adjudicated—delivering faster, smarter, and more reliable outcomes for patients and healthcare stakeholders. We’re looking for a Software Engineer who thrives in fast-moving environments, enjoys building modern applications from end to end, and wants to play a pivotal role in shaping the future of healthcare technology. What You’ll Do: As an Engineer at InfinityRx, you’ll be hands-on in evolving the ICP platform and building new tools in our product ecosystem. Your contributions will directly impact patient access and the efficiency of pharmaceutical workflows. You will: • Build and enhance key components of our transaction processor, web application, and APIs, • Contribute across the full software development lifecycle, from design to testing to deployment, • Monitor and maintain performance of our cloud infrastructure to ensure uptime and scalability, • Collaborate closely with teammates to architect and deliver clean, maintainable, high-performance code, • Own your tasks with autonomy, using strong time management and follow-through What You Bring: We’re looking for a developer with a strong foundation in modern full stack development, cloud deployment, and API design. You should be comfortable navigating both front-end and back-end technologies, and ready to dive into a growing codebase. Required Skills & Experience: • Bachelor’s degree in computer science, engineering, life sciences, or other related discipline, • 5+ years of professional software development, • Proficient in Java, TypeScript, and SQL (PostgreSQL), • Experience with Spring (Boot or Framework) and React, • Comfortable with RESTful API design and consumption, • Skilled with unit and integration testing using frameworks like JUnit and Mocha, • Familiar with using the Linux command line, • Experience in pharma or healthcare technology, • Proficiency in designing database schemas and writing performant queries, • Familiarity with Redis and NoSQL databases (such as MongoDB), • Ability to perform basic data analysis (such as in SQL or Python), • Use of UI frameworks like Tailwind CSS, Bootstrap, or Material UI, • Experience with observability tools like Datadog, • Involvement in system architecture or technical design decisions You’re a Great Fit If You Are: • A problem-solver who enjoys building scalable, high-quality solutions, • A team player with excellent communication skills, • Comfortable in a startup environment where flexibility and initiative are key, • Motivated by real-world impact in healthcare technology What We Offer: • Hybrid Work Schedule: Mix of in-office (New Hyde Park, NY) and remote flexibility, • Salary Range: $120,000-$150,000 Commensurate with experience, • Paid Time Off, • Growth Potential: Room to advance as our team and product suite expand Join InfinityRx and become part of a team that's building transformative healthcare solutions—one line of code at a time.

Job DescriptionJob Description Hours: Full-Time Position – 35 Hours Work Location: 30-30 Thomson Avenue, LIC, NY 11101 Only candidates who are permanent in the Civil Engineer title, those who are reachable on DDC Promotional List (Exam #4522), or reachable on the Open-Competitive List (Exam #0156 or #4030) may apply. Please include a copy of your Notice of Results card or indicate if you are already permanent in the title. If you do not meet the previously mentioned civil service criteria, you will not be considered for an interview. The NYC Department of Design and Construction's Division of Infrastructure is in search of an Engineer-in-Charge to join the Area-Wide Green Infrastructure – Cloudburst Management team. This role, reporting to the Director, entails managing the construction of complex projects, leading constructability review meetings to reduce delays, and ensuring the precise collection of project data. The Engineer-in-Charge will also coordinate with Resident Engineers, Office Engineers, and Inspectors under respective project REI or PMCM consultants, while liaising with the Design, Utility Coordination team, and Program Management Units throughout different stages of construction. Additionally, the successful candidate will be responsible for inspecting contracted work to ensure it meets Agency and City standards, preparing cost proposals for contract negotiations, suggesting modifications to engineering designs, and engaging in design and constructability review meetings; managing and approving various project-specific submissions, such as sheeting design constructability, vendor approvals, and environmental plans, as well as overseeing financial aspects such as payments, change orders, and time extensions. Lastly, the Engineer-in-Charge will oversee final inspections, mentor new staff, manage project close-out procedures, and ensure the approval of final documentation; and will provide regular updates on project progress and address any critical delays in meetings. Authorization to work in the United States is required for this position. NYC Department of Design and Construction does not provide sponsorship for international employees for visa applications, extensions or status changes, including STEM/OPT visas. Applicants are responsible for ensuring that they meet all qualifying requirements for this position, at the time of application. All applicants, including City Employees: Please go to NYC Government Jobs | Explore Careers | City of New York, go to Search for Open Jobs, and type in the Job ID # listed above. Submit job application as prompted. Do not apply via Employee Self-Service (ESS), e-mail, mail, or fax your resume to DDC directly. CIVIL ENGINEER - 20215 Qualifications (1) Four (4) years of full-time, satisfactory experience in civil engineering work; and (2) A valid New York State Professional Engineer’s License. Current New York State registration as a Professional Engineer must be maintained for the duration of your employment. A masters degree in civil engineering from an accredited college or university, accredited by regional, national, professional or specialized agencies recognized as accrediting bodies by the U.S. Secretary of Education and by the Council for Higher Education Accreditation (CHEA) may be substituted for one year of the civil engineering experience required in “1" above. Special Note: In addition to above qualification requirements, to be eligible for placement in Assignment Levels II and III, individuals must have at least one year within the last three years of experience as a major contributor or a project leader on a complex project requiring additional and specific expertise in the disciplines needed to design or construct the project. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Job Description Our mission at iRocket is frequent, affordable access to space. We’re hiring a Launch Engineer to manage end-to-end launch operations, integration, vehicle readiness, and mission execution across sites. The Role • Support vehicle assembly, integration, test (AIT), rollout, countdown, and flight operations., • Develop check-lists, execute vehicle/pad/environment checkouts, manage anomaly response during launch campaigns., • Coordinate with propulsion, avionics, structures, safety, and logistics teams to ensure mission readiness., • Monitor launch-site infrastructure, support logistics, GSE, and range coordination., • Bachelor’s degree in Engineering or related field., • 3+ years of launch operations, systems integration, or mission-execution experience (space or defense sector preferred)., • Strong organizational, communication, and problem-solving skills; comfortable in high-stakes environments., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Job description Golden Glow Architectural Studios is a professional design services corporation that provides building code and zoning analysis, per-construction services, tenant protection plans and drafting services in New York City. We provide our clients with in-depth analyses and conduct phased plan reviews from schematic design through construction documents. The ideal candidate will exhibit high standards, excellent communication skills, and have an ability to take initiative, and prioritize daily tasks. A strong ability to take charge and meet tight deadlines will ensure your success in this multi-faceted role. All are encouraged to apply. Responsibilities • Ensuring overall design intent of the project team is incorporated into the detailed documentation., • Monitors the design process from conceptual phase through construction administration, ensuring the design idea is consistent and properly executed., • Preparing Façade Repair Drawings, both individually and with the assistance of our drafting team, as scheduling and company workload requires, • Plans and develops projects of various sizes and works under supervision, • Investigates, evaluates, and recommends design solutions, prioritizes work, receives guidance on complex issues, • Assisting the owner with bid, negotiation, and award of contractors: (1) façade repair, sidewalk shed and adjacent property protection contractors; and (2) where we are contracted as the Construction Manager on non-LL11 projects., • Participates in construction administration by reviewing shop drawings and submittals, responding to RFI’s, working to solve construction issues, and performing site visits to assess general conformance with the design concept, • Strong drafting skills -able to self-perform and guide staff junior architects in the production of construction documents, • Familiarity with NYC agencies having jurisdiction – primarily DOB, FDNY, DOT, DPR and DCP, assist in building code and zoning reviews when needed., • Assists with marketing and business development activities, • Coordinating the work of junior professionals and technicians, • Consistently reviews work and communicate needs and concerns to project staff., • Bachelor's degree or equivalent experience, • Architecture registration required., • Strong interpersonal, customer service, writing, and communication skills., • Good understanding of construction, building codes and zoning, • Experience in architecture including project and construction documentation., • Ability to work on multiple, fast-paced projects and documents., • Experienced in Revit and AutoCAD software, • Architecture & Planning We offer a comprehensive benefits package that includes medical, dental, vision, FSA and 401(k). We are an equal opportunity employer.

Job Description The Senior Controls Engineer is an integral part of Champion’s continued success in applying Process Automation and SCADA solutions. This critical, high-profile role is primarily focused on PLC control and SCADA data visualization; incorporating automation, energy monitoring and optimization system analytics. Responsibilities/Essential Functions: · Programming, configuring and maintaining PLC programs and SCADA objects in SCADA system that control and model field assets · Deploying and configuring SCADA objects to support data acquisition from field assets as they are brought online and changed in the field · Create and enforce project specific standards, augment and enhance solutions, benchmark individual and application performance metrics as well as estimate level of effort for initiatives. · Creation and binding of animated visualizations of system graphics and operator interface screens · Generating custom programming scripts to handle global functions · Create Submittals for projects · Commissioning and startup for instrumentation and controls projects Minimum Requirements: · BS in Engineering, Computer Science, or equivalent experience · Minimum of 10 years of experience with SCADA, PLC, and HMI applications · Field Experience in Starting up and commissioning Water, Waste water I&C projects · Experience with AutoCad · Proficiency reading and understanding electrical control schematics · Solid understanding of control and process logic, various communications protocols (Ethernet/IP, MODbus, TCP/IP), and network communications infrastructure · Experience in Factory Talk, Iconics Genesis, Wonderware, GE Fanuc Intellution/Proficy, Citect, Motorola Moscad /ACE 3600 applications · Experience writing control and ladder logic programming, basic scripts, and uploading programs to PLC. Development of HMI. PLC and HMI programming experience for Industrial Automation a plus · Experience with calibration, startup and commissioning of Industrial Instruments Company DescriptionChampion Controls is a leading control systems supplier providing system integration and engineering design services, as well as manufacturing of custom control panels for a variety of markets. We hold Underwriters Laboratory (UL) certifications for the USA and Canada as a manufacturer of industrial control panels, as well as industrial control panels relating to hazardous locations. We employ a staff of talented professional engineers, electrical technicians, and sales people, who can meet your project needs including providing turnkey installations.Champion Controls is a leading control systems supplier providing system integration and engineering design services, as well as manufacturing of custom control panels for a variety of markets. We hold Underwriters Laboratory (UL) certifications for the USA and Canada as a manufacturer of industrial control panels, as well as industrial control panels relating to hazardous locations. We employ a staff of talented professional engineers, electrical technicians, and sales people, who can meet your project needs including providing turnkey installations.

Job DescriptionDescription: JOB TITLE: Quality Engineer Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment in innovation, quality, and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Quality Engineer to join our dynamic team and continue our mission of excellence. Job Summary: In this role, you will be responsible for ensuring safety and quality of our products and procedures through rigorous inspections, implementations of quality measures, and identification of areas for improvement. You will collaborate with cross-functional teams to address quality issues, drive continuous improvement, and contribute to building a high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering and/or quality assurance, exceptional attention to detail and a proactive mindset. If you are passionate about quality and delivering excellence, we encourage you to apply and become a valued member of the Quality team. Key responsibilities: · Set detailed guidelines on what needs to be checked and what the quality standards are. · Audit our systems based on ISO 9001: 2015 requirements. · Monitor the entire production cycle and perform regular tests to identify potential malfunctions as early as possible. · Inspect product materials and PCB for defects and durability. · Prepare reports on malfunctions and corrective actions (e.g. number of defective raw materials per order) · Review current blueprints and quality documentation · Work with internal teams to increase customer satisfaction by improving the quality of products. Required Qualifications: · Previous work experience as a Quality Engineer, Manufacturing Engineer, or similar role. · In-depth understanding of technical documentation · Able to create a technical document · Working knowledge of RCCA practice · Familiar with IPC610 and J-STD · Familiarity with statistical analysis · Great attention to detail and problem-solving abilities · Team Spirit · Great analytical skills · BSc in Mechanical Engineering, Industrial Engineering, or relevant field. (years of experience will be taken into consideration as a substitute for a BSc) · Additional certification in Quality Assurance is a plus. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free uniforms, • Health insurance, • Develop detailed technical drawings and specifications for retail window displays and pop ups., • Ensure that all project builds are designed with Health and Safety at the forefront of your mind., • Providing Build Drawings and CNC files., • Liaising with Project Managers on project requirements and deadlines.- Work closely with the Production Team to ensure that designs can be efficiently and accurately produced. • Conduct regular quality checks on prototypes and final products to verify accuracy and adherence to design specifications., • Participate in meetings with clients to present technical drawings and discuss project requirements. • Work closely with the design team whilst designing a project for a client. Ensuring that what is designed is achievable in project guidelines, budgets and timelines - whilst also thinking about whats best for the client., • Identify opportunities to streamline processes, improve efficiency, and enhance the overall quality of drafting work., • Proactively seek feedback and implement best practices to support ongoing learning and professional development.Qualifications: • 5+ years of experience in technical drafting for retail window displays and pop ups., • Must use SolidWorks or Inventor, • Proficiency in CAD software such as SolidWorks or Rhino., • Strong understanding of manufacturing processes and materials. • Excellent management skills with the ability to prioritize tasks and meet deadlines., • Detail-oriented mindset with a focus on quality assurance and continuous improvement.- Strong communication and interpersonal skills to collaborate effectively with cross-functional teams. • Ability to problem solve and troubleshoot technical issues as they arise., • Knowledge of health and safety regulations in the retail industry. If you have a passion for creative design and a strong technical background, we invite you to apply for this exciting opportunity to lead a dynamic team in designing innovative retail displays.

Job Description Position Description: Seeking a motivated, intelligent and hard-working individual to Develop and maintain quality and regulatory compliance in Genadynes' processes. Individual will ensure compliance with ISO 13485 and MDSAP requirements are maintained. Specific Responsibilities : Ensure the quality and processes are practiced and maintained. Compile documents required for audits. Create and maintain product technical files. Initiate corrective and preventive actions for non-conformities. Maintain/calibrate the accuracy of all testing equipment. Conduct risk assessments of medical devices and processes. Maintaining the effectiveness of quality control system and non-conforming materials control system. Discuss and solve quality problems with vendors. Investigate problems and make improvement on current processes. Develop/design effective test methods. Facilitate software design and development for medical devices. Performance testing and reporting on software, hardware and the compatibility for all accessories. Perform risk assessments for medical devices and accessories. Development and prototyping of new products with existing or new vendors. Abilities: Familiar with FDA CFR 820, ISO 134850, SOPs regulations. Extreme attention to details. Ability to think outside the box with excellent problem solving abilities. Excellent interpersonal, communication, and writing skills. Highly organized. Excellent computational skills. Knowledge of European regulations is a plus. Knowledge of common medical materials (silicone, polyurethane, etc.) Knowledge of electrical circuits and basic programming. Knowledge of C/C++ is a plus. Maintain MDD/MDR EN ISO Experiences: Regulatory compliance. Quality management. Cross functional team management. Quality assurance Requirements: Bachelor degree in mechanical, electrical, material, biomedical engineering or relative field. (Master degree preferred.) Benefits: Medical, Dental, Vision, PTO, 401K, Legal Services, FSA, Life Insurance Salary Range: $68,000 - $72,000/Annual Powered by JazzHR oSPuR7OKHc

Job Description Project Manager – Environmental Engineering Full-Time | Syosset, Long Island, NY Salary Range $90,000 – $150,000, commensurate with experience and qualifications. About the Company A well-established, multi-disciplinary consulting engineering firm is seeking a talented Project Manager to join its Environmental Engineering team. The firm provides engineering and construction management services to municipal and private clients throughout the Tri-State Region, specializing in civil, structural, traffic, environmental, landscape architecture, mechanical and electrical engineering. Typical project types include transportation infrastructure, utility improvements, site development, solid waste management facilities, and environmental monitoring/reporting programs. Position Summary We are looking for an experienced Environmental Engineering Project Manager with a strong background in environmental and/or civil engineering. This individual will manage design projects, permitting processes, and environmental monitoring/reporting tasks. The ideal candidate will also support business development initiatives and have clear potential to grow into a senior leadership role. Key Responsibilities * Lead and manage project teams, schedules, deliverables, and budgets. * Serve as primary client contact, ensuring excellent communication and service. * Support business development activities, including proposal preparation and client presentations. * Oversee and prepare engineering design plans, specifications, and cost estimates. * Develop contract bid packages and funding applications. * Prepare technical reports, environmental permit applications, and related documentation. Qualifications * Bachelor's degree in Environmental, Chemical, or Civil Engineering; Master's in Environmental Engineering is a plus. * 10–15 years of relevant engineering experience. * Active NYS Professional Engineer (PE) license required. * Strong knowledge of New York State regulations, specifications, and codes. * Proficiency with industry-standard software (e.g., Microsoft Office, CAD). * Proven experience in project management, technical writing, and business development is highly preferred.

Job Description Project engineer Full Time / Syosset, NY Commercial Real Estate firm located in Syosset, New York has an immediate need for an experienced Project Engineer The Project Engineer will support project management throughout all phases of construction. This role requires strong technical skills, attention to detail, and the ability to communicate effectively. The Project Engineer will ensure project documentation processes are maintained accurately and efficiently. Key Responsibilities • Assist in day-to-day project coordination and execution within the Construction Department., • Receive, log, and track building permit applications, construction plans, and related documentation., • Maintain digital and physical records of permits, inspections, and plan review files in accordance with departmental procedures., • Review project drawings, specifications, and submittals for accuracy and compliance with requirements., • Track Requests for Information (RFIs), submittals, change orders, and other project documentation., • Assembles materials and forms for distribution as directed., • Prepares routine reports or assists in the preparation of reports by gathering data, tabulating results, and/or preparing simple charts. Maintains records and files., • Participate in project meetings and prepare reports summarizing progress and issues., • Collaborate with General Contractors for closeout documents – as-builts, warrantees, guarantees., • 2–5 years of relevant experience in construction engineering or project management., • Proficiency in construction management software (e.g., Procore, Bluebeam, MS Office Suite, MS Project)., • Understanding of construction drawings, codes, and industry standards., • Excellent organizational, communication, and problem-solving skills., • Ability to work effectively both in the office and on job sites. Company Benefits: Employee contributions and waiting periods may apply: • 401(k), • Medical, • Dental, • Life and Accidental Death Insurance, • Short and Long-Term Disability Insurance, • Flexible Spending Account, • Health Reimbursement Account

Job DescriptionTech/Electronics company located in Plainview NY is looking for a Production Engineer to join their team. Full benefits including 26 days off the first year and bonus. Being the Production Engineer, you will help with the engineering and quality agenda with the overall goal to improve the customer satisfaction. You are the main contact towards the suppliers and work as part of the business team together with the supplier to develop and secure the production process, handling of quality deviations, and secure compliance to all company requirements. About the assignment: The Production Engineer is responsible for Quality Assurance including to secure process control for key processes in production. Among other things, you:• Develop new manufacturing processes, and equipment to ensure manufacturing is efficient and effective.• Investigate and analyze problems and derive solutions in the manufacturing process.• Transfer R&D prototypes into series production phase and document the manufacturing processes.• Perform and create First Article Inspection Documents. • Perform Product audits and production risk assessments at suppliers • Develops the recipe with suppliers to match desired taste profile quality and nutrition. • Lead the Supplier Development for quality and manufacturing with responsibility to identify and implement actions and execution of SDP projects. • Lead industrialization of minor news development and contribute with competence to other new developments. Knowledge about Total Quality Management - University degree in Engineering or correspondingPrevious experience as Process or Production Engineer in manufacturing PreferredExperience of industrial production conditions and Lean manufacturing Contact Michael Panter for more details:

Job DescriptionDescription: The candidate will support the electrical design and test of Rate and Rate Integrating Gyroscopes. This will include the design of electrical gyroscope components such as motors, pickoffs and torquers, as well as custom built test fixtures and test harnesses. In addition, the candidate will assist in the design of tests and provide analytical support for testing Rate and Rate Integrating Gyroscopes, including Acceptance Test Procedures (ATP), scale factor, transfer function, drift, alignment, and 1st and 2nd order system stability characteristics (gain/phase analysis), etc. EDUCATION: Minimum 4-year degree in electrical or electronics engineering, or other technical degree with appropriate work history or background. EXPERIENCE: 5+ years dealing with four or more of the following: Electronic product or component design and/or analysis Basic understanding of 1st or 2nd order control systems (servo systems, spring/mass/damper) Electronics systems (amplifiers, power supplies, demodulators, signal conditioning, filters) Electromechanical, mechanical, or electromagnetic systems Engineered (specialized) products to customer/government specifications Custom (product specific) Test systems Environmental testing (temperature, shock, vibration as a minimum) Hands-on design, test, and troubleshooting experience required SKILLS: Required skill set shall include as a minimum: Can interpret, digest, and produce technical specifications and procedures Computer literacy Excellent communications, presentation, and written skills, including customer facing Analytical (math) modeling capability, 1st and 2nd order systems Electrical test equipment operation skills, e.g.; DVM, oscilloscope, signal generator PC Board design Analog circuit design and component selection Servo (control system) analysis, and system design (1st and 2nd order systems), gain/phase analysis Additional skills desirable: Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment Microcontroller/microprocessor based digital and/or mixed signal circuit and system design Magnetic circuit analysis and design capability Basic mechanical instruments skills, e.g.; micrometers, calipers, dial indicators, precision levels An outstanding self-starter with a can-do attitude willing to go above and beyond the normal Requirements:

Job Description Senior Manufacturing Engineer About the Role: The Senior Manufacturing Engineer will lead the development and optimization of advanced manufacturing processes within an ISO 13485-certified environment. This role focuses on continuous improvement, lean manufacturing, and precision CNC machining to enhance product quality, reduce costs, and streamline operations. The position requires strong technical expertise, hands-on process leadership, and experience mentoring junior engineers in a fast-paced, high-precision production setting. Responsibilities: * Develop, implement, and optimize manufacturing processes to meet quality, efficiency, and regulatory standards. * Lead process validation, documentation, and improvement efforts in compliance with ISO 13485 and related quality systems. * Utilize lean manufacturing, continuous improvement, and 5S principles to enhance operational performance and reduce waste. * Evaluate and refine CNC machining operations, tooling design, and process flow for precision manufacturing. * Conduct cost estimation, process analysis, and capacity planning to support new and existing product lines. * Oversee the installation, testing, and maintenance of manufacturing equipment and production systems. * Mentor and train junior engineers, providing technical guidance and professional development support. * Collaborate with cross-functional teams to resolve production challenges and implement process improvements. * Ensure manufacturing practices adhere to safety, quality, and environmental regulations. * Identify and integrate automation and digital manufacturing technologies to drive process innovation. Qualifications: * Bachelors degree in Mechanical Engineering, Manufacturing Engineering, or a related technical discipline. * Minimum of 10 years of manufacturing engineering experience, with at least 5 years of continuous tenure at one organization. * Proven experience working in an ISO 13485-certified or other regulated manufacturing environment. * Expertise in CNC machining processes, tool design, and process optimization. * Demonstrated application of lean manufacturing, continuous improvement, and 5S methodologies. * Strong knowledge of CAD software, project management tools, and data-driven process control. * Exceptional analytical, problem-solving, and communication skills. * Proven ability to manage complex projects and lead cross-functional teams. * Commitment to quality, safety, and compliance in all manufacturing operations. Desired Qualifications: * Six Sigma Green Belt certification or equivalent process improvement training. * Experience mentoring and developing engineering talent within a manufacturing organization. * Familiarity with automation, robotics, and advanced manufacturing technologies. * Background in medical device manufacturing or other precision, high-regulation industries. * Strong record of driving measurable cost reductions, efficiency gains, and quality improvements. This position offers a competitive salary, comprehensive benefits, and the opportunity to lead impactful process improvements in a world-class, ISO-certified manufacturing environment.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionMunicipal Civil Engineer - TOP 50 ENR Civil Engineering Firm This Jobot Job is hosted by: John Erwin Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $110,000 - $140,000 per year A bit about us: Based just outside of Manhattan with 5 offices across the region we are a $50M+ TOP ENR Ranked Civil Engineering Firm! Our core values are centered around our people and our clients. We believe that putting your employees first is not only the right thing to do, but it also gives us the competitive edge to ensure our clients have an excellent experience! Over the years our reputation for providing our people with the very best has caught the eye of some reputable clients who have chosen to use us as their primary firm! Some of these clients include: MTA and many more! If you are an experienced Civil Project Manager, then please apply! Why join us? Do you want to work with some of the nation’s best Clients AND enjoy time at home w/ family? We do too! • Meaningful Work!, • Best in Class Firm!, • Competitive Compensation Package!, • Complete Benefits Package!, • Flexible Work Schedules!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details Is your background a fit? Apply if you meet this criterion: BS in Civil Engineering and an active NY P.E. license • 3+ Years of Civil experience Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description The Project Engineer, with the assistance of the Project Team, coordinates all project activities to ensure cost, schedule, document control and quality standards are met. Under the direction of upper Management, the Project Engineer is expected to take on any/all tasks in the quest to learn the Electrical Construction Industry and the Company’s processes. Job Responsibilities: • Assisting with Design Work: Support more experienced engineers in designing electrical systems, components, etc. This may involve using software tools to create schematics, drawings, or models., • Documentation: Keeping accurate records and documentation is crucial in engineering. Entry-level engineers may be responsible for documenting their work, writing reports, and maintaining records of design specifications and test results., • Collaboration: Entry-level engineers often collaborate with other engineers, and project personnel from different disciplines to complete projects and solve problems., • Learning and Professional Development: Entry-level engineers spend time learning about the company's products, processes, and industry standards. They may also participate in training programs to enhance their technical skills and knowledge., • Fieldwork: Depending on the nature of the projects, entry-level engineers may have opportunities to visit job sites, participate in field installations, or assist in commissioning electrical systems., • Adhering to Codes and Standards: Entry-level engineers must familiarize themselves with relevant codes, standards, and regulations governing electrical design and installation to ensure that their work complies with legal and safety requirements., • Ability to work with a team., • Having organizational skills., • Ability to perform different tasks at the same time., • Having technical knowledge, • Ability to follow precise instructions., • Having IT skills with emphasis on Microsoft Office., • Being able to solve different types of problems., • Having good communication skills., • Being familiar with regulatory standards pertaining to the power industry., • Over 15 Years Owned and Operated, • Job training and mentorship, • Supportive Management Team, • Emphasis on professional development, employee satisfaction and work-life balance, • Competitive compensation packages, • Comprehensive benefits, • Paid holidays and vacation, • 401(k) match, • Medical Insurance, • Vision insurance, • Dental Insurance, • Union shopCompany DescriptionRMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.RMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.

Job Description Job Summary: A LaserAway Laser Engineer will be responsible for all the laser maintenance, safety, and team communication that ultimately support all clinic operations. Continuous assessments and improvements allow our team to remain efficient and effective at LaserAway. Compensation: $90,000-$95,000 Annual Salary Overall Responsibilities: • Oversee all laser maintenance within the assigned territory, • Monitor ticket system, communication platforms, and emails for prompt responses, • Support New Store Openings by ensuring all equipment is functional, • Contribute to positive moral environments within clinic operations, • Establish positive co-worker partnerships for operational effectiveness, • Timely ticket responses to ensure operational readiness, • Ability to exceed expectations and aid in improving overall operations, • Exercise critical thinking and prioritize tasks based on business needs, • Contribute to the support system and demeanor for our clinic teams, • Professionally address non-work related topics with the team, • Prepare Weekly Reports to discuss overall equipment status and updates, • Contribute to a high morale and stress-free environment, • Ensure availability during all clinical operating hours, • Communicate any support needed in advance and professionally, • Properly utilize the communication channels with professionalism, • Coordinate with the medical team to assist in additional equipment training, • Maintain company vehicle in good standing and maintenance, • Maintain a minimum of 8 locations and or 100 medical devices, • Self-sufficient and creating a work schedule, • Support new clinics by scheduling time and meeting all equipment deadlines, • Support new clinics by completing all checklist responsibilities, • Excellent prioritization skills with high-priority to low-priority tasks, • Apply attention to detail to all maintenance processes, • Coordinate with 3rd party equipment repairs and facilitate issues/replacement parts and utilize efficient communication, • Absorb and continuously learn all maintenance procedures, • Nomenclature of Parts, • Part functions and interconnections, • Fault isolation of electrical components, • Optic Alignments, • Energy Software Calibrations, • Disassembly and reassembly of sub-components, • Minor wire splicing, harness repair, and soldering, • Schedule and perform routine maintenance on equipment and respond to on-call laser issues, • Ability to reinspect and quality check all individual processes, • Ability to request assistance to avoid negative business impacts, • Ability to invest time into advancing and seeking more knowledge, • Ability to manage stress and multiple issues efficiently, • Timely service call submissions and meeting attendance, • Ability to communicate professionalism and proper etiquette, • Communicate effectively to all teams, including down equipment or estimated times of repair, • Inventory Control- Maintain and account for all parts routinely, • Ability to adjust Preventative Maintenance schedule given other urgent tasks, • Ability to return damaged/repair parts and manage logistics effectively, • Ability to professionally address recommendations to management, • Ability to multitask while maintaining operational readiness, • Availability- Flexible with the on-call schedule and the ability to adjust per the needs of the operation, • Proficient computer skills including the use of email, video conferencing, Google spreadsheets, and ticket management systems, • Team player and supportive while covering for others, • Flexibility to cover out-of-state or out-of-territory remote clinics, • Proficiency with repair tools and techniques, • Excellent time management, organization, and prioritization abilities, • Maintain ongoing communication with the management and clinic team, • Knowledge of Electrical Safety and Theory, • Strong drive to complete tasks timely, • Maintain a clean driving record and valid identification, • Critical Thinking skills, • Punctual and accurate reporting, • Excellent verbal and written communication skills, • Strong analytical and problem-solving skills., • Ability to develop management skills, • Ability to prioritize tasks and delegate them when appropriate, • Preferred Education, bachelor's degree in the following fields, • Biomedical Engineering, • Project Management, • Electrical Engineer, • Any engineering, • Electrician, • HVAC, • Ability to work before, during, and after business hours, including weekends, • Conduct video meetings with a professional appearance, • Ability to organize the company vehicle, tools, and parts inventory, • Ability to maneuver and or climb an 8ft ladder, • Ability to stand for periods exceeding up to 4 hours, • Ability to drive up to 8 hours per day, • Ability to roll and or carry a tool bag to and from each clinic, • Ability to transport equipment up to 250lbs from location to location, • Ability to load and unload equipment in a company vehicle with a ramp inclined at 25 degrees, • Flexible to drive or fly to another territory and or out-of-state clinics, • Support other Laser Engineers during time off, emergencies, or as requested by management, • Ability to travel out of the territory for up to 5 days at a time LaserAway offers a generous pay structure with additional earning potential through performance review. Additional benefits include (but not limited to): • Healthcare benefits, • Dental, Vision, and 401(k), • Paid Time Away (PTA), • Generous employee discounts This job description is not all inclusive. In addition, LaserAway reserves the right to amend this job description at any time. LaserAway is an Equal Opportunity Employer. Employees must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. The Employer retains the right to change or assign other duties to this position.

Job Description JSG is interested in speaking with Sr. Electrical Engineer with a Professional Engineering (PE) license and experience with AutoCAD. This is a direct hire opportunity with our top client in Syosset, NY. Salary for this role is $160K. Sr. Electrical Engineer Description • Design and develop electrical systems including power distribution, lighting, fire alarm, and low-voltage systems for commercial, industrial, municipal and healthcare facilities., • Conduct site visits, inspections, field surveys to support design and construction phases., • Preparation of construction documents, including drawings, specifications, one-line diagrams and load calculations., • Ensure designs comply with applicable codes and standards., • Coordinate with multidisciplinary teams including architectural, mechanical, plumbing, and other team members., • Review of submittals and RFIs during construction administration, • Serve as Project Engineer and Project Manager on smaller, less complex projects, • Use engineering and design computer software to complete assigned work (i.e. Autodesk Revit MEP & AutoCAD), • Capable of leading a team of engineers and working independently with little guidance. The ideal candidate possesses the below additional experience; • 10+ years of Electrical Design experience, • Proficiency with AutoCAD and/or Revit, • Understanding of NEC, NFPA & IEEE codes and standards, • Experience with sustainable design and LEED-certified projects preferred, • Excellent communication, multi-tasking and an ability to work independently, • Professional Engineering (PE) license required, • Bachelors in Electrical Engineering Required Please apply if you are ready to work ASAP with a fast-growing Construction Company! Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with over 35 years of experience investing in people and companies. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. Company DescriptionOur people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals. Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs. We offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.Our people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals.\r\n\r\nJohnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs.\r\n\r\nWe offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more.\r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Job DescriptionDescription: Job Description: Responsible for the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Salary: $83,200.00/yr Availability: On Call 24/7 Essential Job Duties Under the Direction of the Director of Engineering and Operations: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Conduct, schedule and manage periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform and/or oversee electrical and plumbing repair and troubleshooting., 6. Perform and/or oversee mechanical projects., 7. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Troubleshoot, evaluate equipment/systems and recommend upgrades., 10. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 11. Order parts and supplies as required and maintain stock and inventory control., 12. Work with the Director of Engineering and Building Manager in planning and controlling annual and capital budgets., 13. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 14. Be familiar with and conform to all written operating procedures associated with site., 15. Ensure the cleanliness and appearance of all work areas., 16. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member with all staff, 17. Perform other duties as assigned. Skills, Education and Experience: · Minimum of five (5) years of experience in building operations, engineering and equipment and systems maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Strong customer service, communication and computer skills inclusive of payroll reporting · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders A detailed scope-of-work will be discussed during the interview process. The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Dental insurance, • Health insurance, • Paid time off Location: Long Island, New York Company: Harlequin Design New York Inc. About Us: Harlequin Design New York Inc. is a leading design and fabrication agency specializing in innovative solutions across various industries. We pride ourselves on our commitment to quality, creativity, and collaboration, creating exceptional designs that exceed client expectations. Job Description: We are seeking a talented SolidWorks Engineer to join our dynamic team. The ideal candidate will have a strong background in 3D modeling and engineering design, with a passion for creating precise and functional products. You will work closely with our design and fabrication teams to bring concepts to life and ensure the highest standards of quality and performance. Key Responsibilities: • Develop and modify 3D models and technical drawings using SolidWorks., • Collaborate with engineers and designers to translate concepts into detailed designs., • Conduct feasibility studies and simulations to optimize designs., • Prepare and maintain documentation related to design specifications and revisions., • Assist in prototyping and testing to validate designs and improve performance., • Provide technical support during the fabrication process and address any design-related issues., • Stay updated on industry trends and advancements in CAD technologies.Qualifications:, • Bachelors degree in Mechanical Engineering, Industrial Design, or a related field., • Proficiency in SolidWorks; additional CAD software knowledge is a plus., • Strong understanding of engineering principles, materials, and manufacturing processes., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team-oriented environment., • Effective communication skills, both written and verbal.What We Offer:, • Competitive salary and benefits package., • Opportunities for professional development and career growth., • A creative and collaborative work environment., • The chance to work on diverse projects that make an impact.

Job Description Civil Engineer I – Long Island & New York City Location: Long Island & New York City Employment Type: Full-time Salary: $70,000-$90,000 - Commensurate with experience About Us Our firm is a forward-thinking professional services organization with a strong legacy of delivering high-quality, innovative engineering solutions. Our expertise includes civil, structural, transportation, bridge, environmental, landscape architecture, electrical, and mechanical engineering, as well as construction inspection. We are driven by a commitment to excellence, collaboration, and continuous growth—shaping better outcomes for our clients, colleagues, and communities. Position Overview We're looking for a motivated Civil Engineer I to support a wide range of exciting civil design projects. This role offers opportunities to collaborate with experienced engineers and gain hands-on experience in developing plans, specifications, and technical solutions for infrastructure and site development projects. What You'll Do * Perform design calculations and ensure compliance with applicable codes and regulations. * Prepare and review design and construction plans, specifications, cost estimates, and permit applications. * Collaborate with engineers, CADD technicians, and other team members to deliver high-quality results. * Conduct site visits to evaluate project conditions and coordinate with stakeholders. * Draft technical reports, design documentation, and project correspondence. * Participate in client and agency meetings and professional development events. What You'll Bring * Bachelor's degree in Civil Engineering or a related field (required). * 2–4 years of experience in civil design (consulting or professional services preferred). * Engineer in Training (EIT) certification required; PE licensure preferred. * Proficiency in Civil 3D; experience with site layout, grading, and utilities design. * Familiarity with stormwater design software (HydroCAD, HEC-RAS, or SWMM) preferred. * Excellent communication, organization, and multitasking skills. * Ability to travel up to 10% (occasionally on short notice). Why You'll Love Working Here • Competitive base salary and discretionary bonus plan. Comprehensive benefits package, including multiple healthcare plan options, dental coverage, life insurance, short- and long-term disability insurance, and 401(k) with immediate match and vesting. * Paid time off: 15 vacation days, 64 hours of sick time, and 9.5 paid holidays. * Additional perks like Flexible Spending Account (FSA), Employee Assistance Program (EAP), and more. This company is an Equal Opportunity Employer. All qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Senior Project Engineer – Civil (Long Island & New York City) Location: Long Island & New York City Employment Type: Full-time Salary: $115,000-$150,000- Commensurate with experience About Us Our firm is a forward-thinking professional services organization with a strong legacy of delivering high-quality, innovative engineering solutions. Our expertise includes civil, structural, transportation, bridge, environmental, landscape architecture, electrical, and mechanical engineering, as well as construction inspection. We are driven by a commitment to excellence, collaboration, and continuous growth—shaping better outcomes for our clients, colleagues, and communities. Position Overview We're seeking an experienced Senior Project Engineer – Civil to lead site development and utility infrastructure projects from concept to completion. This role combines technical expertise with project management, offering opportunities to mentor junior engineers, coordinate multidisciplinary efforts, and ensure successful project outcomes. What You'll Do * Manage all aspects of civil engineering projects—planning, design, permitting, and construction. * Lead collaboration with clients, consultants, and contractors to meet project goals. * Oversee project schedules, budgets, and resource allocation. * Ensure design compliance with all regulatory standards and best practices. * Review design plans, cost estimates, and technical specifications. * Represent LKB in client meetings and professional association events. What You'll Bring * Bachelor's degree in Civil Engineering or a related field (required). * 10–15 years of civil design experience (consulting or professional services preferred). * Professional Engineer (PE) license required. * Proven success in managing large-scale land development and infrastructure projects. * Strong leadership, organizational, and communication skills. * Proficiency in Civil 3D; familiarity with HydroCAD, HEC-RAS, or SWMM preferred. * Ability to travel up to 10% (occasionally on short notice). Why You'll Love Working Here * Competitive base salary and discretionary bonus plan. * Comprehensive benefits package, including multiple healthcare plan options, dental coverage, life insurance, disability insurance, and 401(k) with immediate match and vesting. * Paid time off: 15 vacation days, 64 hours of sick time, and 9.5 paid holidays. * Additional perks like Flexible Spending Account (FSA), Employee Assistance Program (EAP), and more. This company is an Equal Opportunity Employer committed to diversity and inclusion in the workplace.

Job Description Responsibilities: Develop and execute advanced temperature control strategies for HVAC systems to ensure optimal comfort, energy efficiency, and system performance. Collaborate closely with project teams, mechanical engineers, and clients to understand project requirements and develop tailored temperature control solutions that align with project goals. Configure, program, and fine-tune Building Management Systems (BMS), Programmable Logic Controllers (PLC), and Direct Digital Controllers (DDC) to implement precise temperature control algorithms. Conduct thorough site assessments to evaluate existing temperature control systems, diagnose issues, and propose upgrades or improvements. Generate detailed schematics, wiring diagrams, and documentation for temperature control system installations, troubleshooting, and ongoing maintenance. Oversee the commissioning process by calibrating sensors, validating control sequences, and performing thorough testing to ensure accurate temperature regulation. Collaborate with installation teams and technicians during the implementation phase to ensure accurate execution of control strategies and equipment integration. Keep current with industry trends, emerging technologies, and best practices in temperature control and building automation. Qualifications: Bachelor’s degree in mechanical engineering, Electrical Engineering, or a related field. Advanced degrees are a plus. Extensive experience in HVAC temperature controls engineering, including a deep understanding of temperature control theory and application. Proficiency in programming languages and platforms used in temperature control systems. Demonstrated ability to design, troubleshoot, and optimize complex temperature control algorithms. In-depth knowledge of HVAC systems and components, including chillers, boilers, air handlers, and various temperature regulation devices. Familiarity with industry standards and codes related to temperature control. Ability and willingness to travel to project sites as required. Company Description* With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts. • Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity., • We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion., • Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential.* With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts.\r\n\r\n* Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity.\r\n\r\n* We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion. \r\n\r\n* Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential.

Job DescriptionAre you an organized, detail-oriented professional who thrives in a fast-paced environment? Do you enjoy coordinating multiple moving parts to ensure seamless project execution? Are you looking for an opportunity to grow your career in a company that values excellence, integrity, and environmentally sound solutions? If this sounds like you, read on! Precision Signs is looking for a highly-skilled Engineering Project Coordinator to join our team! This role offers an exciting opportunity to work with project managers, estimating teams, engineers, and stakeholders to support the planning and execution of projects while ensuring they stay on track and within budget. This position offers the opportunity for significant growth, with the potential to take on increased responsibilities and progress within the company. What We Offer At Precision Signs, we believe in investing in our people and providing a supportive environment where you can grow, thrive, and make a meaningful impact. We offer: • Competitive salary starting at $52,000.00 annually, based on experience, • Career growth opportunities with the potential to take on increased responsibilities, • Health insurance with comprehensive coverage options, • Paid time off, including vacation and sick leave, • Professional development opportunities, including training and certification support, • A close-knit, collaborative team where your skills are recognized and valuedWhat You’ll Do, • Review all incoming jobs and analyze architectural drawings, specs, schedules, and project documents., • Identify missing information and coordinate with Project Managers to obtain clarifications., • Define project scope, signage requirements, special conditions, and quoting needs., • Gather as much information as possible, and help determine where, • Evaluate feasibility with engineers and production to ensure work fits company capabilities., • Flesh out sign type designations and basic construction details for predictable engineering intake., • Prepare complete intake packages enabling engineers to begin work without delays., • Communicate cross‑departmentally to prevent bottlenecks and ensure smooth workflow transition., • Begin RFI (Request for Information) process as necessary to clarify project details.What You Bring, • Ability to read and interpret architectural drawings, specifications, and message schedules., • Strong organizational skills and attention to detail., • Ability to identify risk, missing info, and inconsistencies early., • Strong written and verbal communication skills across Project Management, Engineering, and Production., • Proficiency with Microsoft Office, PDF Tools and online collaboration tools., • Familiarity with sign fabrication, construction methods, or interest and willingness to learn., • Ability to manage multiple projects and organize information consistently., • Associate or Bachelor’s degree in Architectural Technology, Engineering Technology, Industrial Design, Construction Management, or similar., • Technical school certificates in drafting, engineering technology, or fabrication. Powered by JazzHR lGjJ7qRKUC

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionEngineering Lab Manager Needed For Leading Aerospace Manufacturer This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $125,000 - $150,000 per year A bit about us: We are dedicated to advancing technology through meticulous control and management of electronic parts for high-stakes projects. Our team thrives on innovation and precision, ensuring the highest industry standards. Why join us? Compensation Up To $150,000 Engage in cutting-edge technology projects. Collaborate with a dynamic and skilled team. Access continuous learning and development opportunities. Be part of a company that values precision and quality. Enjoy a supportive work environment with room for growth. Job Details Engineering Lab Manager is required to support the assembly/alignment/testing of RF/Microwave electronic component assemblies starting with PC sub-assemblies to modules to system integration. 1-Generation of in-process test procedures/data sheets for PCA’s, modules and top-level system testing. 2-Design and creation of system interface test fixturing. 3-Review of customer performance specifications (EQ spec) and customer supplied documentation: -Parts/Material/Process program requirements. -Top level system test requirements including Thermal Cycling, Thermal Vacuum, Vibration, Shock and EMI testing. 4-Generation of engineering required documentation: -Failure reports (if required) -Discrepant Material Report (DMR) -Recovery Test Plans. -Engineering change notices for customer review and internal component updates. -End Item Data Packages for submittal to customer for review and acceptance -Data management (storage and maintaining of test data for company review and accessibility) 5-Test support for engineers, technicians, engineering associates: a.Tools (universal for RF/Microwave assemblies) b.Test equipment (specific to each program) c. Equipment rental/purchase. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Schivo Medical manufactures a diverse range of essential medical technology solutions. Working with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will be part of a company committed to helping you build a fulfilling and a rewarding career. Job Summary: Continuous Improvement Engineers (CIE) provide support in areas of Continuous Improvement and facilitate individuals and teams by implementing change and improvements to processes throughout the organization. The CIE is responsible for training of other personnel on continuous improvement tools and assures the highest quality and least costly manufacturing processes are put in place when improvements are made. Improvement activities include but not limited to participation in, and leading of cross functional teams through, the execution of continuous improvement projects on processes and methods while focusing on customer satisfaction, quality, safety, and productivity using lean six sigma methodology and tools. Essential Duties and Responsibilities: • Act as a change agent in the organization by driving change and implementing continuous improvement processes, while utilizing and improving existing methodologies, • Promote lean manufacturing practices by educating the organization in the use of lean principles, • Utilize lean manufacturing tools (i.e. value stream mapping, Kaizen, 5S, Gemba walks, root cause problem solving) to identify and develop solutions that drive operational improvement, • Actively participate in, and lead, cross functional teams through the execution of continuous improvement projects, of processes and methods, focused on customer satisfaction, quality, safety, and productivity using the Lean Six Sigma methodology and tools, • Create and update work procedures, forms, and process flows based on projects, • Track, monitor and report regularly on status of projects, • Provide analytics to support the need for a change and the return on investment, • Bachelor’s degree (B. S.) in a related engineering discipline from an accredited, four-year college or university; one to two years related experience and/or training; or equivalent combination of education and experience., • Computer literacy with a working knowledge Microsoft Office (Excel and Word), and SAP experience preferred. Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status. Benefits: • 401(k), • 401(match), • Dental insurance, • Health insurance, • Paid time off, • EAP Program, • Life Insurance, • Employee referral program, • Addtl incentives

Job Description The Chief Engineer is responsible for ensuring proper operations, maintenance, service and repair of all equipment, while supporting the Hilton and LMG, goals of guest satisfaction, cost control and profitability. He/she is also responsible for overseeing and participating in the Preventative Maintenance program, ensuring that all rooms and public space meet Hilton standards. Management level associates are expected to work as much of each workday as is necessary to complete their job responsibilities. Exempt managers must customarily and regular direct the work of at least 3 full-time associates or their equivalents. Primary duties must consist of administrative, executive, or professional tasks more than 50 percent of the time and job duties must also involve the use of discretion and independent judgement more than 50 percent of the time. Education & Experience • High School diploma or equivalent required. • At least 5 years of progressive experience in a hotel or a related field; or a 2-year college degree and 3 or more years of related experience; or a 4-year college degree and at least 2 years of related experience. • Supervisory experience required. • Current Certification as required by Federal, State or Local governing agents pertaining to trade requirements (i.e. HVAC, pool operation, electrical), property specific. • Current certification and licensing to operate and repair the hotels boilers and chillers as required by state, city, and local legislation. • Must have a valid driver's license for the applicable state. • Must be able to convey information and ideas clearly. • Must be able to evaluate and select among alternative courses of action quickly and accurately• Must work well in stressful, high pressure situations. • Must maintain composure and objectivity under pressure. • Must be effective in handling problems in the workplace, including anticipating, preventing, identifying and solving problems as necessary. • Must have the ability to assimilate complex information, data, etc. from disparate sources and consider, adjust or modify to meet the constraints of the particular need. • Must be effective at listening to, understanding, clarifying and resolving the concerns and issues raised by coworkers and guests. • Must be able to work with and understand financial information and data, and basic arithmetic functions. Job Duties & Functions • Assist with the operation, maintenance and repair of equipment. • Change out light bulbs; perform preventative maintenance for guest rooms to include: vinyl repair, touch up paint, minor furniture repair, tub caulking, tile repairs, etc. • Perform preventative maintenance for ice machines, refrigerators, kitchen equipment, laundry equipment, HVAC, guestrooms, meeting rooms, the swimming pool and hot tub. • Perform plumbing repair, laundry equipment repair, preventative maintenance on all exhaust fans and supply; monitor energy conservation; repair vacuum cleaners and any other small equipment upon request. • Immediately follow up on any alarms to determine the exact location and cause - determine emergency status and report to the Front Desk with findings. • Perform other tasks/jobs as assigned by the supervisor or manager. This job description is not intended to be all-inclusive, additional details will be specified by the General Manager. Management reserves the right to change this job description, job responsibilities, duties, and working hours as needs prevail. If requested in accordance with applicable law, the Company provides reasonable accommodation to known physical or mental limitations of an otherwise qualified associate with a disability to allow him/her to perform essential functions of the job unless the accommodation would impose an undue hardship on the Company. Levine Mgmt Group LLC is an at-will employer. This job description is a guideline and does not constitute a written or implied employment contract.

Job Description Job Description Schivo Medical in Plainview, New York manufactures a diverse range of essential medical technology solutions. Working with us, you will be apart of the manufacturing process of a vast array of different products including robotic surgery instruments medical devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will work with a team of professionals that are committed to helping create parts that save lives and help assist you with a fulfilling and rewarding career. Senior Manufacturing Engineer job summary: A Manufacturing Engineer is responsible for designing, implementing, and reviewing the procedures and equipment involved in the manufacturing process. Their duties include researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Senior Manufacturing Engineer Necessary Education, Skills, and Competencies (including licensing and certifications): • 10 years of work experience as a manufacturing engineer or similar role needed, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g. CAD, MS Office), • Project management skills, • Problem-solving ability, • Teamwork skills, • Degree in Mechanical Engineering or related field(CNC Machining), • Green belt certificate a plus, • Working knowledge with continuous improvement process Senior Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, test, and implement manufacturing process., • Study production and machine requirements, • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Develop and mentor Junior engineers, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with new technology Benefits: • Employee referral, • 401(k), • 401(k) matching, • Dental insurance, • Vision insurance, • Life Insurance, • Employee assistance program, • Health insurance, • Paid time off, • Referral program * Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionRole Title: Chief Architect Role Level: SVP Location: Headquarters - Melville, NY Reports to: Chief Product & Technology Officer Role Overview: We are seeking a visionary Chief Architect to build and lead our enterprise-wide architecture function. This is a unique opportunity to design the technology blueprint for a global platform that processes millions of mission-critical transactions daily. As the most senior architecture leader, you will establish the standards, frameworks, and practices that will scale our business into its next phase of growth. This role requires strong hands-on execution. You’ll partner with executives, product leaders, and engineering teams to ensure architecture isn’t just theory — it’s the foundation of high-performing, resilient, and secure systems that power our business. Success in This Role Looks Like • A clear enterprise architecture framework adopted company-wide within 12–18 months., • Architecture governance embedded in delivery teams, balancing speed with quality., • Systems and platforms that scale reliably and securely as the company grows., • A recognized, high-performing architecture team trusted across executives, product, and engineering. Build and Lead the Architecture Function • Establish enterprise-wide architecture standards, frameworks, and governance, • Educate executives, product leaders, and engineers to embed architectural discipline across the organization., • Translate business strategy into technology capabilities across the enterprise., • Design a cohesive blueprint that links enterprise, solution, application, data, and security architecture., • Oversee architecture for new platforms and services., • Chair the Architecture Review Board to align design decisions across product and engineering., • Define the data architecture roadmap and governance practices that enable analytics, AI, and compliance., • Provide guidance on cloud adoption, DevSecOps, and infrastructure strategy., • Define reference architectures for microservices, APIs, and event-driven systems., • Build and inspire a team of enterprise, solution, application, data, and security architects., • Act as a strategic advisor to the executive team on technology investment, risk, and platform strategy., • Serve as the chief evangelist of architecture, influencing at all levels of the organization. Key Qualifications: Must-Have • 15–20+ years of experience in technology and architecture leadership, with at least 5 years as a Chief Architect in similar size organizations., • Background in platform, payments, fintech, e-commerce, or other high-transaction, high-availability industries strongly preferred., • Proven track record of establishing architecture functions in organizations without existing standards., • Deep expertise across enterprise, solution, application, data, and security architectures., • Mastery of cloud platforms (AWS, Azure, or GCP), microservices, APIs, distributed systems, and event-driven design., • Exceptional leadership and communication skills — able to educate, influence, and inspire at all levels., • Strong change management experience: capable of building frameworks, gaining buy-in, and embedding practices. Preferred • Experience working in platform or marketplace companies (e.g., Uber, Airbnb, DoorDash)., • Understanding of growth models and technology investment decision frameworks. API is the global leader for crew accommodation solutions, and we are changing the way businesses manage travel. Our technology platform streamlines the entire crew planning process, making day-to-day operations more efficient and elevating the crew layover experience. API’s proprietary technology, mobile solutions and our experienced team are positioned to offer our clients a complete, end-to-end platform that integrates seamlessly into their process. We are looking for dynamic, creative, and tech savvy individuals to join our team. If you are passionate about hard work, providing impeccable service, technology, and solutions to our clients then API may be a great fit for you! Other Duties Duties, responsibilities and activities may change at any time according to business needs. The performance of additional responsibilities if you are designated as a Data Protection Champion (DPC), Senior Information Risk Owner (SIRO) or Information Assurance Accounting Officer (IAAO). Work Environment This position operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. AAP/EEO Statement Accommodations Plus International is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. Powered by JazzHR syTNrkoidO

Job Description RouteSmart Technologies, a leader in vehicle route optimization software technology, is seeking a Cloud Engineer to join our IT Infrastructure & Security Department. This role will report directly to the Sr. Infrastructure & Security Engineer and is responsible for implementing, maintaining, and improving our cloud IT infrastructure, systems, and AWS environments. The Cloud Engineer will work closely with the DevOps and Product Development teams to ensure secure, scalable, and efficient cloud operations across our production and development environments. The typical base pay range for this position at the start of employment is expected to be between $120,000–$130,000 per year. RouteSmart Technologies, Inc. has different base pay ranges for different work locations within the U.S., and base pay will vary based on experience. This is a hybrid role; candidates must be able to commute to the office in Melville, NY or Columbia, MD. Candidates must reside within 50 miles and be available to work onsite several days per week. However, we will consider the right candidate for remote work if domiciled in one of the following states: Maryland, New York, Pennsylvania, DC, Virginia, Arizona, California, Colorado, Florida, Idaho, Illinois, Indiana, Minnesota, New Jersey, North Carolina, Oregon, South Carolina, Texas, Washington. Essential Duties & Responsibilities • Assist in researching, designing, and implementing secure, scalable, and cost-effective IT infrastructure, systems, security components, standards, and services., • Maintain, troubleshoot, and resolve issues related to infrastructure, systems, services, security, and accounts., • Continuously monitor the health and performance of the AWS infrastructure, systems, and accounts, identifying issues and implementing solutions for improved efficiency., • Analyze components, logs, services, and specific tools as needed., • Implement, enforce, and configure security policies, controls, services, identity management, and other security measures to protect from unauthorized access and cyber threats., • Stay up-to-date on technology trends and best practices, adapting to evolving cloud IT technologies and management approaches., • Communicate effectively and create accurate documentation of designs, configurations, processes, and procedures., • Collaborate closely with other team members on projects and tasks, ensuring seamless integration and support for IT initiatives., • 5+ years of experience with cloud infrastructure, systems, and security., • Minimum of 3 years of hands-on experience with AWS services., • Strong communication and collaboration skills., • Highly organized with strong analytical and problem-solving abilities., • Ability to work independently and as part of a team., • Commitment to continuous learning and delivering high-quality service. Education & Experience • Bachelor’s degree in Computer Science, Information Systems, Business Technology, or a related field—or equivalent experience., • Proficiency in IT infrastructure, networking, system administration, and security., • Solid experience with AWS services and concepts., • Experience with Infrastructure as Code (IaC) tools such as AWS CloudFormation or Terraform. RouteSmart offers its employees numerous opportunities for professional development. Our goal is to provide our employees the chance to learn and grow as the company grows. We recognize that our employees are our most valuable asset. The work they do is key to our ability to provide high quality service to our clients. We also recognize that our employees are unique individuals with their own lifestyle and interests. RouteSmart Technologies pays a significant share of the cost of benefits for our employees. We believe our investment makes good business sense by helping to create a positive and productive work environment. Among the benefits we offer are: • Medical/Dental/Vision/STD & LTD Plans, • Employer paid Life Insurance Plan, • Employee Training & Development, • 401(k) Retirement Savings Plan w/ Employer Match, • Vacation/Sick/Holiday Leave, • Tuition Reimbursement, • Flex hours, • Casual Dress RouteSmart Technologies is proud to be an equal opportunity workplace. Individuals seeking employment at RouteSmart Technologies are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. We do not accept resumes from headhunters, placement agencies, or other suppliers that have not signed a formal agreement with us. All candidates must have legal authorization to permanently live and work in the United States. This position does not qualify for sponsorship.

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Hybrid: 3 days onsite (Tues/Wed/Thurs) Duration: 12 months (Potential for extension) Key responsibilities: • Tools proficiency: Atlassian Toolset, Github, Jenkins, Artifactory, Octopus Deploy, Sonarqube, • Automate processes: Build and manage tools and pipelines (like CI/CD) to automate repetitive tasks in the software development lifecycle., • Manage infrastructure: Provision, configure, and manage the underlying infrastructure, often using cloud platforms like AWS or Azure and "infrastructure as code" principles., • Ensure reliability and performance: Implement monitoring and alerting to ensure systems are running smoothly, and work to resolve issues and bottlenecks in the development process., • Bridge teams: Foster collaboration between development and operations teams, acting as a liaison to ensure smooth, efficient code releases and deployments., • Implement security and compliance: Incorporate security best practices into the development and deployment process. Essential skills and knowledge: • Software development lifecycle: A deep understanding of how software is built, tested, and deployed., • Automation tools: Expertise in tools for CI/CD, configuration management, and containerization (e.g., Docker, Kubernetes, Jenkins)., • Cloud platforms: Experience with major cloud providers like AWS, Azure, or Google Cloud., • Scripting and programming: Proficiency in scripting languages is essential for automation., • System administration: Strong knowledge of operating systems, servers, and networking is required., • Soft skills: Excellent communication, collaboration, and problem-solving skills are crucial for working across different teams. Company DescriptionSelect Source International (SSI) is a distinguished staffing company with nearly 25 years of experience, renowned for delivering top-tier workforce solutions encompassing staffing, recruiting, and managed services. As a proud supplier, we bring a wealth of expertise and best-in-business differentiators to comprehensively support your diverse workforce needs. Based in Minneapolis, Minnesota, USA, SSI has established itself as a global leader, serving a broad clientele across industries with unwavering dedication and excellence. SSI is ISO 9001, 14001, and Soc2 Type2 certified, underscoring our commitment to quality and security. We have garnered numerous sustainability and supplier diversity awards, further validating our industry-leading capabilitiesSelect Source International (SSI) is a distinguished staffing company with nearly 25 years of experience, renowned for delivering top-tier workforce solutions encompassing staffing, recruiting, and managed services. As a proud supplier, we bring a wealth of expertise and best-in-business differentiators to comprehensively support your diverse workforce needs.\r\n\r\nBased in Minneapolis, Minnesota, USA, SSI has established itself as a global leader, serving a broad clientele across industries with unwavering dedication and excellence. SSI is ISO 9001, 14001, and Soc2 Type2 certified, underscoring our commitment to quality and security. We have garnered numerous sustainability and supplier diversity awards, further validating our industry-leading capabilities

Job Description Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for you to join our collaborative team as a Design Engineer. This is a full-time, on-site role. Primary Functions Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Salary commensurate with experience (Range from $45,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K, • EAP Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels., • Design and layout of electrical panels using AutoCAD., • Ensure that all panels are being designed and constructed to UL Standards., • Creating Bill of Materials for the sales engineer team., • Create testing procedures for specific projects to be used by shop personnel., • Determine parameters to program variable frequency drives and soft starters., • 3 years+ experience in the design of electrical system preferred, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Some Minor Lifting and Moving of Parts and Equipment We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionRF Engineering Technician Location: Farmingdale, NY Job Type: Permanent, Full-Time Schedule: 9/80 Work Week (Nine-hour days with alternating Fridays off) About the Role Are you passionate about RF technology and eager to work hands-on with advanced electronic systems? Whether you’re a graduate with strong RF fundamentals or a seasoned technician with years of experience, this role offers an exciting opportunity to repair, test, and troubleshoot complex electronic equipment, including RF and microwave components. You’ll collaborate with production, test, field service, and engineering teams to ensure our equipment meets the highest performance standards. Key Responsibilities • Repair and troubleshoot electronic equipment such as printed circuit boards, multiplexing systems, and amplifiers, • Diagnose operational failures using advanced test equipment, • Reconstruct or replace defective parts and adjust mechanical components, • Review engineering change notices and apply updates to equipment design, • Align, adjust, and calibrate equipment to precise specifications, • Apply coatings or paint to components as needed, • Test equipment to ensure compliance with documented performance standards, • Maintain accurate records of repairs, calibrations, and tests in a computer database, • Provide technical support during product investigations, • Associate’s or Bachelor’s Degree in Electronics, Electrical Engineering, or related field (or equivalent hands-on experience), • Strong understanding of RF and microwave principles, • Familiarity with oscilloscopes, multimeters, and other diagnostic tools, • Skilled in troubleshooting and repairing electronic components, • Experience testing circuits and RF systems, • Knowledge of engineering documentation and change notices, • Understanding of electrical engineering principlesWhy Join Us?, • Entry-Level Friendly: Recent graduates with strong RF knowledge will receive comprehensive training and mentorship, • Experienced Technicians Welcome: Bring your expertise and take on complex challenges with cutting-edge technology, • Collaborative team environment with opportunities for growth Medical & Prescription Coverage Employees have access to a high-deductible comprehensive medical plan through BlueCross BlueShield, which includes: - Preventive care at no cost (e.g., routine exams, immunizations, cancer screenings) - Office visits, lab work, and diagnostic imaging with copays - Emergency and urgent care services - Inpatient and outpatient hospitalization - Maternity care and newborn services - Mental health and substance abuse treatment Prescription drug coverage includes a mandatory generic substitution policy, with tiered copays applied after the deductible. Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on Dec 20, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Senior Civil Engineer Role Overview As a Senior Civil Engineer, you will lead and deliver complex design projects for a variety of industrial, utility, municipal, and institutional clients. You'll collaborate with multidisciplinary teams, mentor junior engineers, and manage the preparation of high-quality construction documents under tight schedules. This position also involves direct coordination with clients, consultants, and contractors throughout design and construction phases. Key Responsibilities Lead civil design for high-profile energy and utilities infrastructure projects. Assist management to oversee the full project lifecycle, from initiation design to construction closure. Oversee and mentor junior engineers, review technical work, and support their development. Perform engineering calculations and design of site/civil systems for industrial facilities, higher education campuses, and public infrastructure projects for federal, state, and municipal clients. Conduct planning, permitting, design, and construction support for projects involving stormwater systems, water/wastewater treatment, pump stations, and geothermal. Prepare construction documents, specifications, construction schedules and cost estimates Proficiency in Autodesk Civil 3D, and familiarity with related software to develop site layouts, grading plans, utility profiles, and other design tasks. Development of Stormwater Pollution prevention Plans (SWPPP), and coordinate permitting and inspection tasks. Conduct research on engineering guidelines and regulations of municipal agencies. Conduct field inspections and manage QA/QC during construction. Collaborate on proposals and represent CE in meetings with clients and stakeholders Required Qualifications Education: Bachelor’s degree in Civil Engineering or equivalent Experience: 7–10 years in civil engineering, with a focus on utilities and public infrastructure Licensure: EIT required; PE preferred Technical Skills: Strong knowledge of civil design, construction practices, and relevant building codes Software: Proficiency in AutoCAD, Civil 3D, and Microsoft Office; Revit familiarity a plus Other: Valid NYS driver’s license (or equivalent) and willingness to travel throughout the NYC Metro Area Strong communication skills, both verbal and written

Certifications (Preferred): Engineer-in-Training (EIT) or Professional Engineer (PE) license. Senior Electrical Engineer Summary We are seeking a highly motivated and seasoned Senior Electrical Engineer to join our client's team. Technical Knowledge: In-depth knowledge of Electrical Engineering desi

Position: Engineering Technical Project Coordinator Company: NAPCO Security Technologies, Inc.Location: Amityville, NY Company: NAPCO Security Technologies, a worldwide leader in the design and manufacturing of reliable, innovative solutions for physical security, access control, locking, cellular c

Senior Associate Civil Engineer US-NY-Mineola Job ID: 2023-2871 Type: Regular Full-Time of Openings: 1 Category: Civil/Structural Engineering The LiRo Group Overview We have an immediate need for a Senior Associate Civil Engineer for our Mineola, Long Island Office. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities • Serve as lead civil engineer for local townships and villages on Long Island in the consultation, review and preparation of site plans, roadway improvements, drainage upgrades, traffic safety, and streetscape efforts., • As the village or township engineer, lead the preparation of design plans, bid books and specifications, oversight of construction inspections, and final closeout of construction., • Attend planning board meetings and serve as a specialty civil engineering consultant (attendance at evening meetings once per week on average)., • Respond to RFPs and prepare letter proposals for new contracts and task orders., • Lead and direct civil engineering design staff as well as field inspectors on ongoing municipal projects., • Quickly respond and travel to local building departments and departments of public work as LiRo’s representative to support local infrastructure projects., • Perform plan reviews for quality assurance, constructability, and conformance to Nassau County, Suffolk County, and NYSDOT standards., • Financial management of projects and resource staffing., • Attendance at industry functions and business development events Qualifications • Bachelor of Science in Civil Engineering, • 10+ years’ experience in Civil Engineering, • NY PE required, • Ability to provide guidance to junior level engineers, • Understanding and application of local code requirements, • Strong written and verbal communication skills, • Ability to multitask and consistently meet deadlines Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $125,000; Maximum: $170,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay. Exact compensation will be determined on the individual candidate’s qualifications and location., • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. #ID22 #ZR22 PI628bca1a3895-37820-33502547

As the village or township engineer, lead the preparation of design plans, bid books and specifications, oversight of construction inspections, and final closeout of construction. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineer