Trabajos environmental en Houston, TexasCrear alertas

Explore opportunities with Kelsey-Seybold Clinic, part of the Optum family of businesses. Work with one of the nation's leading health care organizations and build your career at one of our 40+ locations throughout Houston. Be part of a team that is nationally recognized for delivering coordinated and accountable care. As a multi-specialty clinic, we offer care from more than 900 medical providers in 65 medical specialties. Take on a rewarding opportunity to help drive higher quality, higher patient satisfaction and lower total costs. Join us and discover the meaning behind Caring. Connecting. Growing together. Upon the order of a qualified practitioner or provider, the Medical Imaging Supervisor will utilize equipment that produces ionizing radiation and/or other energies used in medical imaging to obtain studies for diagnostic purposes according to policies, procedures, and protocols of the KSC Medical Imaging Department and Kelsey-Seybold Clinic. The Medical Imaging Supervisor will utilize the designated Radiology Information System (RIS), Patient Archiving and Communication System (PACS) as well as computerized time keeping and ordering systems. The Medical Imaging Supervisor is directly responsible for regulatory compliance, inspection, accreditation, and maintenance concerns. Duties include the supervision of technical and/or clerical staff members; staff may be in multiple locations and/or multiple modalities. Primary Responsibilities: • Performs diagnostic medical imaging studies in keeping with credentials and according to policies, procedures and protocols of the KSC radiology department, • Understands and applies technical principles affecting optimal production of images, as well as anatomical orientations and anomalies affecting proper imaging techniques, • Understands age related communication needs of patients and is able to effectively convey instructions to patients to facilitate the performance of studies, • Adheres to professional and accreditation standards, federal and state regulations, and AAAHC requirements, • Maintain confidentiality of medical information as required by the Health Insurance & Accountability Act (HIPAA), • Prepares department for Environmental Health and Safety Inspections, • Adheres to all radiology standards of operation and policies, • Maintains current applicable licenses and/or certifications and complies with continuing education requirements. Verifies clinical staff members are in compliance with license and/or certification bodies and participate in to maintain credentials, • Conscious of radiation and other energy safety measures and demonstrates competency. Monitors utilization of radiation and other energy safety measures and devices by subordinates, • Accomplishes human resource objectives by selecting, orienting, training, mentoring, assigning, scheduling, coaching, and providing corrective action for employees; communicating job expectations; planning, monitoring, appraising job contributions; and adhering to policies and procedures, • Has the authority to implement performance improvement plans if needed, • Working with Human Resources and the Radiology Manager, the Supervisor will make recommendations regarding resolution in all performance related issues up to and including terminations, • Plans, schedules, and assigns work for department, ensuring coverage of all hours of operations and monitors productivity, • Responsible for meeting efficiency and productivity standards, • Responsible for assuring studies are completed and read in keeping with departmental standards, • Oversees Technical Quality Control measures and is responsible for the quality of studies produced in areas of responsibility, • Trouble shoots complex imaging issues, provides technical assistance, coordinates equipment service and is responsible for resolution, • Works closely with Radiologists, Management, and Quality Specialists to assess issues and institutes corrective action plan for staff and/or equipment issues that affect optimal performance, • Uses RIS and PACS system correctly, according to Clinic and Department guidelines, • Responsible for correct use of RIS and PACS by subordinates, • Corrects errors and is responsible for maintaining integrity of data sent to PACS by staff, • Orders supplies and maintains necessary par levels to meet normal operations, receives orders, verifies content and follows through with accounting department by providing required documentation for payment and assists with account resolution should discrepancies arise, • Uses Kronos for timekeeping responsibilities, • Utilizes sterile technique when necessary and oversees subordinates in the use of proper techniques, • Verifies that subordinates maintain documentation of cleaning logs as applicable and that they comply with KSC safety initiatives, • Participates in operational and capital budget planning. Monitors departmental expenditures, identifies variances, and makes recommendations for corrective actions, • Assists in the evaluation of new equipment and consumables. Looks for opportunities for cost savings. Works closely with department manager to monitor costs to ensure departments of responsibility are within budget., • Maintains patient service standards, provides supportive care to patients by mediating and resolving any issues that arise, and identifies improvement opportunities, • Interacts effectively with patients and coworkers, including staff assigned to other locations, • Is responsible for distribution of departmental policy changes and structure changes to staff, • Participates in and is a training resource for formal and in-service training programs of KelseySeybold Clinic, department specific in services, and any applicable site-specific training, • Communicates readily and well with Manager and Radiologists in giving and receiving feedback, • Keeps radiology management and clinic administrator apprised of issues as applicable, • Must have the ability to understand and respond to questions by giving factual information, • Capable of dealing effectively with other clinic departments, physicians, and staff, • Uses the Mission and Values as a guideline for all communications, verbal, written, or electronic, • May be assigned to other duties, technical or non-technical if training, experience, and credentials are deemed adequate by the manager to perform those duties and makes staff assignments based on the same criteria You'll be rewarded and recognized for your performance in an environment that will challenge you and give you clear direction on what it takes to succeed in your role as well as provide development for other roles you may be interested in. Required Qualifications: • Associates Degree in Applied Science or Graduate of an accredited school of Nuclear Medicine, Ultrasound, Radiologic Technology, and/or MRI, • Required licenses and certifications dependent on the modality/specialty of the incumbent, • BCLS certification, • 3+ years technical experience to include regulatory and quality control responsibilities. PACS and RIS experience, • Ability to use computer and Microsoft Office to generate department reports and presentations, PRN. Ability to grasp elements of image acquisition and workflows in multiple modalities, • Excellent verbal, written and interpersonal communication skills, Documented evidence of leadership abilities Preferred Qualifications: • Bachelor's in healthcare sciences, business, or human resources, • ARRT (R) MRT- General Certificate, • Certification in additional imaging modalities Pay is based on several factors including but not limited to local labor markets, education, work experience, certifications, etc. In addition to your salary, we offer benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). No matter where or when you begin a career with us, you'll find a far-reaching choice of benefits and incentives. The salary for this role will range from $72,800 to $130,000 annually based on full-time employment. We comply with all minimum wage laws as applicable. At UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone-of every race, gender, sexuality, age, location and income-deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes - an enterprise priority reflected in our mission. OptumCare is an Equal Employment Opportunity employer under applicable law and qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. OptumCare is a drug-free workplace. Candidates are required to pass a drug test before beginning employment.

Safely operate, repair, rebuild and perform maintenance on Company owned or leased heavy duty diesel trucks and equipment including rolling stock to ensure its ability to operate safely Starting Pay: up to $35/hr (Will Increase Based on EXP/Qualifications) Starting Shift: 3pm-3am M-F. Have to be open to working rotating Saturdays (11am-5pm). OT after 40hrs worked! Benefits: -15 days of paid time off -Annual Boot Reimbursement -Overtime after 40hrs worked -401K after 6 months employment -Health Benefits after 60 days This is a boots on the ground, tool in hand position! Key Responsibilities: • Diagnose and repair operational difficulties with heavy duty diesel trucks and equipment., • Maintain and repair heavy diesel, CNG, gas and electrically operated equipment and vehicles., • Complete reports, work orders, order parts and perform other administrative duties as required daily., • Plan and schedule repairs in M5 planner and procure all parts for successful plan., • Assist in the review of mechanical write-ups on equipment and coordinate repair schedule., • Ensure safe working conditions and compliance with all safety regulations., • Utilize a variety of power and hand tools and equipment., • Possess, provide and maintain tools necessary to perform tasks related to maintenance on heavy/hydraulic equipment., • Maintain a clean work area., • Conform in all respects with applicable federal, state/provincial and local laws, regulations, ordinances and other orders and to all company policies, procedures and directives from supervisors., • Assist in the training and orientation of new employees., • Maintain a working knowledge of and keep up with the latest technology through the use of technical manuals and attendance of technical training seminars and testing., • Perform other duties and responsibilities as required or requested by management. Requirements: • High school diploma or general education degree (GED); technical diploma desired., • Minimum of one (1) year experience as a diesel mechanic, • Experience using diagnostic software a plus, • Must be computer literate, have the ability to be trained on software systems and the willingness to learn., • Must be able to meet relevant criteria for safety sensitive functions according to Company standards Knowledge, Skills and Abilities: • Ability to communicate effectively with others., • Demonstrate ability to follow detailed instructions, work independently and maintain accurate records., • Ability to understand and effectively use repair and parts manuals written in English., • Ability to operate any vehicle or equipment necessary to perform job., • Possess physical ability to perform all aspects of job. Physical/Mental Demands: • Ability to stand, sit, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, taste, and smell., • Continuous concentrated mental and visual attention required., • Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Frequent physical effort including handling tools and equipment required., • Frequently lift/push/pull up to 100 pounds. Working Conditions: • Frequently exposed to loud noise, humidity, hot and cold weather conditions, moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles., • Occasionally work in high precarious places., • Work environment is usually loud. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact _ This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

Safely operate, repair, rebuild and perform maintenance on Company owned or leased heavy duty diesel trucks and equipment including rolling stock to ensure its ability to operate safely Benefits: -15 days of paid time off. -Annual Boot Reimbursement. -Overtime after 40hrs worked. -401K after 6 months employment. -Health Benefits after 60 days. This is a boots on the ground, tool in hand position! Key Responsibilities: • Diagnose and repair operational difficulties with heavy duty diesel trucks and equipment., • Maintain and repair heavy diesel, CNG, gas and electrically operated equipment and vehicles., • Complete reports, work orders, order parts and perform other administrative duties as required daily., • Plan and schedule repairs in M5 planner and procure all parts for successful plan., • Assist in the review of mechanical write-ups on equipment and coordinate repair schedule., • Ensure safe working conditions and compliance with all safety regulations., • Utilize a variety of power and hand tools and equipment., • Possess, provide and maintain tools necessary to perform tasks related to maintenance on heavy/hydraulic equipment., • Maintain a clean work area., • Conform in all respects with applicable federal, state/provincial and local laws, regulations, ordinances and other orders and to all company policies, procedures and directives from supervisors., • Assist in the training and orientation of new employees., • Maintain a working knowledge of and keep up with the latest technology through the use of technical manuals and attendance of technical training seminars and testing., • Perform other duties and responsibilities as required or requested by management. Requirements: • High school diploma or general education degree (GED); technical diploma desired., • Minimum of one (1) year experience as a diesel mechanic., • Experience using diagnostic software a plus., • Must be computer literate, have the ability to be trained on software systems and the willingness to learn., • Must be able to meet relevant criteria for safety sensitive functions according to Company standards. Knowledge, Skills and Abilities: • Ability to communicate effectively with others., • Demonstrate ability to follow detailed instructions, work independently and maintain accurate records., • Ability to understand and effectively use repair and parts manuals written in English., • Ability to operate any vehicle or equipment necessary to perform job., • Possess physical ability to perform all aspects of job. Physical/Mental Demands: • Ability to stand, sit, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, taste, and smell., • Continuous concentrated mental and visual attention required., • Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Frequent physical effort including handling tools and equipment required., • Frequently lift/push/pull up to 100 pounds. Working Conditions: • Frequently exposed to loud noise, humidity, hot and cold weather conditions, moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles., • Occasionally work in high precarious places., • Work environment is usually loud. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact _ Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date. This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

Under the guidance of shop leadership, conduct repairs and preventative maintenance on both Diesel and Compressed Natural Gas (CNG) vehicles to maintain GFL’s fleet in safe and continuous “road ready” condition. Essential Functions: · Under supervisor of maintenance department leadership and senior-level mechanics, diagnose, repair and maintain GFL’s Diesel and CNG fleet. · Complete basic inspection of brake systems, engine components, emission systems, steering mechanisms, wheel bearings and other important parts to ensure they are in proper operating condition. · Test drive trucks to diagnose malfunctions and ensure they are working properly. · Perform standard electronic diagnostics and repair electrical equipment and hydraulic systems. · Perform DOT and brake inspections on all vehicles. · Complete reports, work orders, order parts and perform other administrative duties as required daily. · Complete work as scheduled by shop supervision or higher-grade technicians. · Ensure safe working conditions and compliance with all safety regulations. · Must have a Brake safety certificate and 609 A/C system certification. · Active participation in training classes and development opportunities to increase skills and working knowledge. · Maintain a clean work area. Education, Training, Experience and Licensing/Certification Requirements: · Knowledge of DOT, OSHA and other related state and federal regulations. · Ability to communicate effectively across various levels of the organization and communicate with customers and external vendors. · Ability to read, analyze, and interpret documents such as safety rules, operating, and maintenance instructions and procedural manuals. · Experience using diagnostic software is preferred. Must be computer literate and willing and able to be trained in software systems. · Class A or B Commercial Driver’s License (CDL) preferred, or the willingness and ability to obtain one within six (6) months of employment. · ASE certifications preferred. · 3+ years of diesel/CNG maintenance experience. Physical/Mental Demands: · Ability to stand, sit, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance. · Continuous concentrated mental and visual attention required. · Visual requirements include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. · Ability to operate trucks and other equipment used as needed. · Ability to use a computer and related devices, such as a keyboard or mouse or other related equipment, throughout the workday while seated at a desk or workstation. · Ability to climb ladders, bend or stand for long periods of time. · Ability to reach above shoulders and lift up to 50 pounds and push/pull up to 100 pounds. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact _ Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date. This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

Houston Methodist Willowbrook Hospital (36 hours per week) At Houston Methodist, the Social Worker II (SW II) position comprehensively provides compassionate, clinical social work, psychosocial assessments, diagnosis and treatments, and complex discharge planning to patients and their families of a targeted patient population on a designated unit(s). In collaboration with physicians and the interprofessional health care team, this position sensitizes other health care providers to the social and emotional aspects of a patient's illness to collaboratively facilitate efficient quality care and achievement of desired treatment outcomes and affect positive patient and family outcomes. This position uses case management skills to help patients and their families address and resolve the social, financial and psychological problems related to their health condition. The SW II position holds joint accountability with case manager, assuring that psychosocial and continuing care issues are addressed and treated as needed across the continuum of care and has responsibility for unit or departmental social work program development. This position serves as a hospital-wide, service-line leader for psychosocial related issues, complex discharge planning activities, and population disease management. FLSA STATUS Exempt QUALIFICATIONS EDUCATION • Master's degree in social work from accredited university EXPERIENCE • Three (3) years social services experience in a healthcare setting LICENSES AND CERTIFICATIONS Required • LMSW - Licensed Medical Social Worker - State Licensure - Texas Department of Licensing and Regulation_PSV and, • Magnet ANCC-recognized Case Management certification SKILLS AND ABILITIES • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through on-going skills, competency assessments, and performance evaluations, • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security, • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles, • Knowledge of community resources and health care financial and payer issues, and eligibility for state, local and federal programs, • Maintains individual competencies around critical Social Work functions including; payor rules and regulations, psycho-social assessments and discharge planning methods, • Ability to work independently and exercise sound judgment in interactions with physicians, payors, and patients and their families, • Well versed in computer skills of the entire Microsoft Office Suite (Access, Excel, Outlook, PowerPoint and Word), • Critical thinking, collaboration, negotiation, and mediation skills, • Time management and prioritization skills, • Adherence to the clinical practice standards set forth by NASW practice standards for healthcare settings and more specifically in hospitals and medical centers, • Maintains level of professional contributions as defined in Career Path program ESSENTIAL FUNCTIONS PEOPLE ESSENTIAL FUNCTIONS • Role models communication in an active, positive and effective manner to all health care team members and reports pertinent patient care and family data in a comprehensive and unbiased manner, listens and responds to the ideas of others. Uses therapeutic communication to establish a relationship with patients and families and communicates the discharge plan, facilitating transitions and hand-offs. Supports patients and families in clinical or ethical issues., • Provides staff education specific to patient populations and departmental processes. Functions as a preceptor and mentor to new employees. Identifies opportunities for professional growth of self and peers. SERVICE ESSENTIAL FUNCTIONS • Serves as a hospital/post acute-based leader for comprehensive case management activities including assessing high-risk patients and leading team to identify at-risk patients, participating in daily Care Coordination rounds, and identifying and leading resolution to barriers of efficient patient throughput. Completes a full assessment based on the social work assessment, leading and addressing solutions of social determinants which is accomplished by patient/family interview, review of the medical record including previous episodes of care, H&P, lab and other test results/findings, plan of care, physician orders, nursing and progress notes. Uses advanced knowledge and clinical expertise and screening tools to identify need for case management and/or social work intervention., • Addresses and manages conflict associated with a comprehensive psychosocial treatment plan utilizing appropriate clinical social work diagnoses, treatments and interventions, including crisis intervention, brief individual, marital and family therapies, and patient, family and caregiver groups. Maintains ownership of the psychosocial component, assessments, diagnosis and treatment, of the discharge planning process on assigned units. Assists with screening, identification, diagnosis, management and treatment of victims of abuse, neglect, and domestic violence and of mental health and/or substance abuse problems in patients and family members., • Establishes mutual educational goals with patient and family, providing appropriate resources, incorporating planning for care after discharge. Provides education to physicians and other interprofessional health care team members on mutually identified goals of care and uses knowledge of levels of care, working with patient and family, to ensure discharge disposition is the appropriate level and facilitates transfers., • Uses knowledge for different levels of care, working with patient and family, to ensure discharge disposition is to the appropriate level and facilitates transfers, Provides brief, goal-directed counseling services to assist patients/families to cope more effectively with the transition. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Consistently documents to reflect completed patient screening/assessment and reassessment upon admission and concurrently as needed. Modifies care based on continuous evaluation of the patient’s condition, demonstrates problem-solving and critical thinking, and makes decisions using evidence-based analytical approach. Considers variables that impact treatment plans including diagnosis of emotional, social, and environmental strengths and problems related to their illness, treatment and/or life situation., • Consistently reviews the total picture of the patient for opportunities for care facilitation and needs for discharge planning. Works with case manager for routine discharge and anticipates/prevents and manages/elevates emergent situations with specific focus given to discharge plan and elimination of psychosocial barriers., • Collaborates with staff from the interprofessional health care team concerning safety data to improve outcomes and the safe transition of care through effective patient handoffs. FINANCE ESSENTIAL FUNCTIONS • Completes timely and thorough assessment on all unfunded patients to identify community resources required for effective transition by demonstrating an effective community resource knowledge base and judgment/ability to effectively select and coordinate available resources, including referrals to regulatory agencies, i.e. CPS/APS., • Identifies, obtains and utilizes alternative resources to fill gaps in established community resources., • Guides discharge planning activities for assigned patients and collaborates with the case managers and other members of the interprofessional health care team, as well as patient and family by intervening and coordinating cost-effective, complex discharge planning outcomes and decreased length of stay. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Provides education to hospital physicians, nurses, and other healthcare providers on community resources and psychosocial impact on care needs., • Identifies areas for improvement based on understanding of evidence-based practice literature. Completes and updates the individual development plan (IDP) on an on-going basis., • Identifies, initiates and leads evidence-based practice/performance improvement projects based on observations by offering solutions and participating in unit projects and activities. SUPPLEMENTAL REQUIREMENTS • WORK ATTIRE, • Uniform: No, • Scrubs: No, • Business professional: Yes, • Other (department approved): No ON-CALL* *Note that employees may be required to be on-call during emergencies (ie. Disaster, Severe Weather Events, etc) regardless of selection below. • On Call* Yes TRAVEL** Travel specifications may vary by department • May require travel within the Houston Metropolitan area Yes, • May require travel outside Houston Metropolitan area Yes QUALIFICATIONS EDUCATION • Master's degree in social work from accredited university EXPERIENCE • Three (3) years social services experience in a healthcare setting LICENSES AND CERTIFICATIONS Required • LMSW - Licensed Medical Social Worker - State Licensure - Texas Department of Licensing and Regulation_PSV and, • Magnet ANCC-recognized Case Management certification Company Profile: Houston Methodist Willowbrook Hospital is a Magnet-recognized, not-for-profit, faith-based hospital that serves the growing Northwest Houston community. We are committed to providing quality, cost-effective health care in a compassionate environment for a full range of services, including emergency care, cardiology, orthopedics and sports medicine, comprehensive women’s services, neurology and neurosurgery, oncology, and primary and general medicine. Houston Methodist is an Equal Opportunity Employer.

As a Lead Electrical Engineer, you will elevate your career and make a significant impact by leading projects that craft cutting-edge solutions for diverse clients. At Powell, a Lead Electrical Engineer holding a minimum of a bachelor’s degree in electrical engineering, or a related engineering discipline with a focus on power, will be the “technical face” on projects from concept to completion. You will be working with clients to design custom Low and Medium Voltage Switchgear & Control Solutions to meet their technical specifications and quality standards within the constraints of the budget and the schedule. Additionally, a Lead Electrical Engineer stays updated on industry trends, and provides recommendations for process improvements and technological advancements. Finally, you will join a team that fosters a supportive environment, continuous learning and development where your expertise will not only be appreciated but recognized and rewarded. Essential Responsibilities • Independently complete projects to match client specifications and requirements, • Draft electrical construction drawings using AutoCAD in conjunction with our in-house mechanical and wiring teams, • Apply design knowledge to engineer 480V through 5kv Motor Control, and 480V through 38kV Switchgear along with other miscellaneous equipment, • Work with the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project, • Create and validate Bills of Materials for client submittal and approval, • Complete self and peer design reviews to verify accuracy and completeness of designs before issuing projects to Powell’s manufacturing floor for construction, • Mentors engineers in the department, • Provide technical support in client meetings, • Coordinate with purchasing and suppliers to specify & approve component parts and assemblies, • Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule, • Coordinate with the electrical design team, and the mechanical engineering team for the final design and construction package to include wiring diagrams, one-line diagrams, three-line diagrams, control schemes, and mechanical layouts of the project, • Create AC and DC schematics, door component layouts, wiring diagrams, and one-line diagrams for project approval, construction and As-Built’s drawing submittals, • Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project, • Assist fellow production engineers in solving problems on a daily basis, • Adhere to Powell’s policies and procedures, work instructions, ISO policies, Safety Rules and Regulations, • Meet regularly with clients, suppliers and OEMs Minimum Qualifications • BS Degree in Electrical Engineering, Electrical Technology or related area, • Minimum 8-10 years of experience in an Engineering role, • Advanced drafting/ACAD skills, • Advanced proficiency in electrical SWGR design and control schemes., • Advanced proficiency in understanding power system and relay applications as applied to switchgear products Required Experience Is Proportionate With the Selected Job Level • The Engineer level requires a Bachelor’s degree in an engineering discipline and 0-3 years of relevant job related experience, • The Senior Engineer level requires a Bachelor’s degree in an engineering discipline and 4-8 years of relevant job related experience, • The Lead Engineer level requires Bachelor’s degree in an engineering discipline and 7-10 years of relevant job related experience Skills, Abilities & Other Requirements • Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment, • Solid organization, communication, presentation and planning skills, • Experience in carrying out engineering development types of tasks and addressing production issues, • Demonstrated ability to work collaboratively with others in a cross-functional team environment, • Highly self-motivated in working on “first-of-its-kind” projects that require resilience and tenacity, • Strong problem-solving skills, and the ability to troubleshoot complex system-level problems, • Solid understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams, • Familiarity with power distribution equipment (three phase systems, relays, transformers, control switches, etc.), • Strong understanding of 480V through 38kV electrical distribution and switchgear operation, • Familiar with applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL, • Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product, • Possess a strong customer service commitment, • Proficient at project specification and drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

Field Service Automation Engineer is responsible for providing top level service to Powell customers that will ensure repeat business and total customer satisfaction in the Automation space! He or she will be responsible for executing testing and commissioning of Automation solutions for large and complicated projects. He or she would be expected to secure new business opportunities and gather information on customer future plan for return business and sales opportunities, grow project scope. Estimating knowledge for both Automation equipment and services. Essential Responsibilities • Adhere to Powell’s current safety and quality standards., • Manage on-site project team in completing all site documentation in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used, services provided, and report writing., • Review project scope of work and material for each project., • Provide regular and clear communication regarding work schedules to internal and external customers., • Maintain flexible work hours, which will include over time and weekend support., • Comply with Powell‘s standard operating procedures, documentation processes, safety processes and protocols., • Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric manner., • Able to work in different roles of individual support to working with small crews., • Able to provide Automation solutions to customers in support of sales., • Manage safety requirements for assigned projects., • Review test reports from projects for accuracy and provide recommendations to customers from deficiencies on test reports as a deliverable., • Demonstrate ability to manage tasks, commitments, and deadlines as it pertains to assigned tasks, communications with customers, and internal customers., • Participate in and develop documentation for onsite testing, as well as perform start up and commissioning activities as required., • Common projects include:, • Protection relay testing and commissioning, • SCADA system testing and commissioning, • PLC based system testing and commissioning, • Troubleshooting logic and making necessary corrections to automation product solutions Minimum Qualifications • Bachelor's degree in electrical engineering, as well as 5+ years as an electrical field service engineer in Automation., • Knowledge in common industrial communication protocols such as Modbus TCP/IP, IEC61850, and DNP 3.0., • Knowledge in SCADA systems using WonderWare InTouch, Allen Bradley Factory Talk, Copa-Data Zenon, Siemens WinCC, and/or SEL RTAC HMI, • Knowledge of configuration files using various manufactures such as SEL, GE, Siemens and Beckwith., • Exhibit working knowledge of advanced electrical industry manufacturing standards & electrical systems, working knowledge of both factory testing standards and NETA MTS & ATS standards., • Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear., • Specific knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applications; electrical air and surface creepage clearance requirements., • Demonstrate knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Advanced AC and DC theory; contactor and circuit breaker schematics., • Demonstrate knowledge of basic distribution protective relay testing, hi-pot testing, and breaker function testing. i.e.: testing of over-current and motor protection relays with current injection., • Skilled in the art of writing accurate and complete test reports, project summaries and has the ability to explain most of the system anomalies found on a given project., • The Field Service Automation Engineer will also be expected to demonstrate proficiency with computer skills using Oracle, MS Outlook, Power DB, Word & Excel. Skills, Abilities & Other Requirements • Working knowledge with using the following test equipment: Multi-meter and relay test set., • Must demonstrate working knowledge with the use of various hand tools and mechanical adaptability., • Must have accelerated verbal and written communication skills., • Proficiency in problem solving., • Willing to attend in-house and out-side training., • Willing to travel up to 70% of the year., • Demonstrate ability to read and interpret plan sets and one-line diagrams., • Communicate to customers about project execution plans. Working & Environmental Conditions Working Conditions The Field Service Engineer will perform duties in an industrial environment. This position requires services both locally and across the Continental US, some international may be required. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. Additional requirements are as follows: • Medium physical effort (lifting/moving up to 50 pounds), • Have full range of mobility in upper and lower body and be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time., • Work at heights greater than 10’., • Work on ladders of all types., • Work on scissor and bucket lifts (on occasion). In addition, employees will be required to complete and pass Company and Customer required drug screening, background and employment verification checks, maintaining eligibility throughout employment. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

We are currently seeking a motivated individual to be a part of our growing Powell Automation Division (PAD). This exciting position allows the ability to not only grow professionally but also fuel the future presence of PAD in the automation space! As a member of PAD you will work and collaborate with diverse professionals to apply innovative and creative solutions to solve problems for our clients. Key responsibilities include engineering, testing, maintaining and supporting automation solutions as well as intelligent products in MV/LV switchgear applications. This position does not allow for sponsorship or relocation support. Essential Responsibilities • Become proficient in PAD solutions and offerings, • Review and interpret client specifications to produce project Functional Design, drawings and test documentation in accordance with the project requirements and Powell standard procedures., • Develop relay configuration files using various manufactures such as SEL, GE, Siemens and Beckwith., • Design and configure SCADA systems using WonderWare InTouch, Allen Bradley Factory Talk, Copa-Data Zenon, Siemens WinCC, and/or SEL RTAC AcSELerator Diagram Builder, • Use common industrial communication protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP 3.0, etc., • Develop PLC based electrical system monitoring and controls solutions., • Participate in and develop documentation for factory and on-site acceptance testing (FAT and SAT respectively), as well as perform start-up and commissioning activities as required, • Ensure that the company’s Health, Safety & Environmental policies and procedures are constantly adhered to all aspects of Site Services., • Provide technical guidance to internal and external stakeholders, including after sales support. Minimum Qualifications • BS in a technical discipline, preferably an Electrical Engineer, from an accredited institution with a minimum of seven (7) + years of relevant work experience, • Expertise and experience in at least one of the following is required:, • Automation and Control systems, • Protective Relay programming and commissioning, • PLC applications for Switchgear, • Experience developing, integrating, installing, and commissioning industrial control systems using PLC and HMI solutions., • Experience with PLC logic programming and HMI programming. Experience with Rockwell, Schneider, Siemens, and ABB software a plus, • Experience with common industrial protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP3, Profibus, etc., • Knowledge of 3 phase power is required, • Experience configuring, testing, and commissioning relays. Experience with SEL, GE, and Siemens microprocessor relays is plus. Skills, Abilities & Other Requirements • Excellent customer relation, verbal, and written communication skills, • Strong analytical and trouble shooting skills, • Able to work effectively in a team setting or independently, able to adapt to change, self-starter, innovative, and willing to make a difference, • Able to mentor less experienced engineers, • Willingness to travel locally at least 25% More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

A Lead Electrical Engineer is responsible for overseeing and managing electrical engineering projects from conception to completion. They provide technical expertise and guidance to a team of electrical engineers, ensuring that projects are completed on time, within budget, and meet all quality standards. They also collaborate with other departments and stakeholders to identify project requirements, develop design solutions, and implement electrical systems. Additionally, a Lead Electrical Engineer may be involved in conducting research, staying updated on industry trends, and providing recommendations for process improvements and technological advancements. Essential Responsibilities • Design standard jobs independently., • Read and interpret customer job specifications., • Develop detailed Bills of material for medium and low voltage switchgear, • Order materials., • Create drawings., • Transmit drawings to shop and customer., • Interface with project management, customer and shop., • Direct designers in completing wiring diagrams., • Check wiring diagrams completed by others., • Coordination with Project Management throughout the project, • Constant contact with production to answer questions and provide clarification and/or authorization on design changes, • Follow standard engineering processes and timelines., • Work on multiple projects simultaneously and manage workload as per priority, • Provide technical assistance as necessary to sales, engineering and inspection teams, • Assist with and solve problems of other production engineers on a daily basis., • Adhere to policies and procedures, work instruction, ISO policies, Safety Rules and Regulations, and vendor products. Minimum Qualifications • BS Degree in Electrical Engineering, Electrical Technology or related area., • Minimum 8-10 years of experience in an Engineering role., • Advanced drafting/CAD skills., • Advanced proficiency with electrical design and circuitry., • Advanced proficiency in understanding of power system and relay applications as applied to products. Skill, Abilities & Other Requirements • Basic computer skills using Oracle, Word, Excel., • Ability to learn/use Primavera P6 to update project status and keep all assigned projects on schedule, • Ability to read customer specifications, compare to the quote and provide technical feedback to project management and the customer on differences with minimal supervision., • Proficient at job reviews (i.e., acquired knowledge of specs that Powell should take exception to and specs that require special attention; able to accurately interpret customer specs, etc.), • Apply technical documents to develop one-lines, three-lines and control schemes for SWGR using AutoCAD, • Apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product, • Able to apply NEC, ANSI/IEEE, and various other codes as it applies to the day-to-day activity, • Thorough understanding of power system application along with relay application and coordination, • Able to understand, interpret and troubleshoot customer needs and problems Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

Powell is a dynamic and innovative company that values collaboration, technical excellence, and professional growth. As an Electrical Engineer, you will elevate your career and make a significant impact by leading projects that craft cutting-edge solutions for diverse clients. At Powell, an Electrical Engineer holding a minimum of a bachelor’s degree in electrical engineering, or a related engineering discipline with a focus on power, will be the “technical face” on projects from concept to completion. You will be working with clients to design custom Low and Medium Voltage Switchgear & Control Solutions to meet their technical specifications and quality standards within the constraints of the budget and the schedule. Additionally, an Electrical Engineer will learn industry standards and trends. Finally, you will join a team that fosters a supportive environment, continuous learning and development where your expertise will not only be appreciated but recognized and rewarded. Essential Responsibilities • Design standard jobs with guidance to match client specifications and requirements, • Draft electrical construction drawings using AutoCAD in conjunction with our in-house mechanical and wiring teams, • Gain design knowledge to engineer 480V through 5kv Motor Control, and 480V through 38kV Switchgear along with other miscellaneous equipment, • Work with your Supervisor and the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project, • Create and validate Bills of Materials for client submittal and approval per Powell Standards, • Complete self-design reviews to verify accuracy and completeness of designs before issuing projects to Powell’s manufacturing floor for construction, • Gain the ability to provide technical support in client meetings, • Coordinate with purchasing and suppliers to specify & approve component parts and assemblies, • Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule, • Coordinate with the electrical design team, and the mechanical engineering team for the final design and construction package to include wiring diagrams, one-line diagrams, three-line diagrams, control schemes, and mechanical layouts of the project, • Create AC and DC schematics, door component layouts, wiring diagrams, and one-line diagrams for project approval, construction and As-Built’s drawing submittals, • Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project, • Assist fellow production engineers in solving problems on a daily basis, • Adhere to Powell’s policies and procedures, work instructions, ISO policies, Safety Rules and Regulations, • Meet regularly with clients, suppliers and OEMs Minimum Qualifications • BS Degree in Electrical Engineering, Electrical Technology or related area, • Minimum 1-3 years of experience in an Engineering role, • Ability to draft in ACAD, • Proficient with electrical design and circuitry, • Basic understanding of power system and relay applications as applied to products Skills, Abilities & Other Requirements • Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment, • Solid organization, communication, presentation and planning skills, • Ability to carry out engineering development types of tasks and address production issues, • Demonstrated ability to work collaboratively with others in a cross-functional team environment, • Strong problem-solving skills, and the ability to troubleshoot system-level problems, • Basic understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams, • Basic understanding to being very proficient with power distribution equipment (three phase systems, relays, transformers, control switches, etc.), • Basic knowledge of 480V through 38kV electrical distribution and switchgear operation, • Able to apply applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL in day-to-day activities, • Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product, • Possess a strong customer service commitment, • Basic understanding to being very proficient at drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

Overview: Cash Construction is now hiring a Senior Estimator! The Senior Estimator will bid and complete estimates for Heavy Civil and Single Family (subdivision road and utility) infrastructure projects. They have extensive knowledge of Civil construction means/methods, project schedules and costs. The estimator will be a self-starter and possess the ability to meet critical deadlines. Company Overview: Established in the 1970’s, Cash Construction Company was founded on a commitment to excellence; excellence in how we treat our clients and our employees. Incorporated in Texas, Cash Construction continues to be a leader in the Civil and Infrastructure Construction industry, completing projects involving water and wastewater utilities, drainage improvements, lift stations, pump stations, dry utilities, roadwork, and wind and solar farms. With a large fleet of equipment owned and maintained by Cash Construction, we are well-equipped and ready to self-perform nearly all our contractual obligations. Cash Construction is part of the MasTec Clean Energy & Infrastructure (CE&I) business segment. The CE&I segment generates over $4.5 billion in annual revenue, providing construction services across our renewables, industrial, infrastructure, and general building operating groups. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). Responsibilities: • Prepare bids, select vendors/subcontractors and estimate 'self-performed' crew compositions and production rates., • Make scope of work determinations and perform quantity take-offs., • Cultivate and maintain relationships with clients., • 100% detailed understanding of project scope., • Communicate and collaborate with wide range of individuals, including both Operations and other Estimating team members., • Conduct site visits to assess project conditions and identify any potential risks or challenges, • Evaluate soil conditions, environmental factors, and other site-specific concerns that could affect the cost and schedule of the project, • Identify critical issues and develop risk exposure summary with associated cost impacts, • Provide creative and innovative thinking to analyze and develop strategy and value engineering solutions., • Effective communication and interaction with clients, engineers, subcontractors and suppliers, • Perform and review quantity takeoff comparisons to provide evaluation for accuracy and acceptance, • Work with scheduling staff and Operations to develop accurate and precise bid schedules, • Present complete and accurate estimates to ensure confidence in decision making, • Company representation at pre-bids and site visits Qualifications: Qualifications • A strong desire to learn and grow, • Bachelor's degree in Construction Management, Building Science, Civil Engineering or related field., • Minimum 10 years of experience in heavy civil estimating., • Demonstrated knowledge of Heavy Civil construction. Specifically, earthwork, underground water, underground wastewater, underground drainage and street/highway construction., • Experience with self-perform work., • Sound organizational skills with attention to detail., • Ability to read and interpret plans and specifications., • Experience with Agtek Earthwork take-off software is preferred., • Experience with HCSS Heavy Bid estimating software is preferred., • Willingness to work in a team environment. What's in it for you: Financial Wellbeing • Compensation, commensurate with experience., • Competitive pay with ongoing performance review and merit increase., • 401(k) with company match & Employee Stock Purchase Plan (ESPP)., • Flexible spending account (Healthcare & Dependent care). Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Family & Lifestyle • 15 days Paid Time Off + Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at _. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-TM1 #LI-Onsite Appcast (For Export): #appflash

Calpine, a business unit of Constellation Energy Corporation (Nasdaq: CEG), is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. With 79 energy facilities in operation, Calpine’s fleet has the capacity to generate approximately 27,000 MW of electricity – enough to power approximately 27 million homes. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Position located in the Fleet Solutions office in Pasadena, Texas. Job Summary (including but not limited to the following; other duties may be assigned) Engineers will work closely with all levels of the Power Operation Team to support plant maintenance, operations, conduct analysis through modeling, work on projects in the area of business risk assessment, and other various projects. Use computers and monitoring equipment to measure, record and make adjustments within operating parameters. Provide engineering services for troubleshooting, maintenance, design, and configuration management of existing power plants. Will be conducting analysis on the plant performance efficiency, and strategy updates, supporting model development to assist in evaluation of operational performance. Compiles and prepares reports. Conducts special financial and business-related studies which may include the development of ad hoc and custom reporting involving the determination of metrics and identifying and integrating data sources. Job Responsibilities • Makes decisions regarding own work within defined parameters., • Regularly contributes useful ideas for own work area., • Works on problems of limited scope., • Follows standard practices and procedures., • General instructions on routine work, detailed instructions on new assignments., • May coordinate efforts of others, • Basic communication – delivers information to individuals within defined parameters. Job Requirements • Bachelor’s Degree in engineering or equivalent, Mechanical Engineering preferred., • Minimum of 5+ years’ experience with a concentration on rotating equipment., • Developing use and/or application of basic principles, theories and concepts., • Previous experience working in team an environment using analytical skill set to provide recommendations around business challenges., • Previous experience evaluating performance using model-building techniques., • Previous work experience in an Internship or other entry level work experience is preferred., • Strong communication skills, verbal, written and presentation skills., • Proficiency in MS Office to include MS Excel, MS PowerPoint, etc. Salary Information Salary Range: $109,779.21 - $139,968.50 Additional Calpine Information: • Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities., • Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to hcrecruitment@calpine.com. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP _ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description* Under direct supervision, provide exceptional customer service, involving receipt and payment of cash, while working in a high volume, sales environment. • Evaluate customer relationships, new and existing account holders, to offer bank products and services, • Follow established policies in accordance with the bank and the supervisor s direction, • Accountable for the personal achievement of monthly new account production as assigned by upper management, • Participate in an active sales environment that may require in-store aisle prospecting, • Process deposits and pay out funds in accordance with bank procedures, to record all transactions accurately and balance each day's operations, • Receive cash and checks for deposit, verify amounts, and look for check endorsements, • Examine cash carefully to guard against acceptance of counterfeit checks and identification, • Enter transactions into computer and issue customer receipts, • Sell and prepare money orders, cashier's checks, bank-to-bank wires, and certificates of deposit, • Process western union wires and cash advances, • Cross-sell bank services and products, • Provide bank services to a diverse customer base, including a large Spanish speaking population, • Perform other tasks requested by supervisors as they relate to the bank and its functions, • Regular and predictable attendance and punctuality * Approval limits will be based upon established authority levels Environmental and Physical Requirements: • Required to stand or walk for extended periods of time dependent upon branch location, • Ability to work in a high volume, stressful and noisy environment, • Schedules are prepared based on business need and subject to change at any time, • Operate a computer and other office machinery, • Ability to lift up to 50 lbs. FNBT is an equal opportunity employer.

Job Description* Under direct supervision, provide exceptional customer service, involving receipt and payment of cash, while working in a high volume, sales environment. • Evaluate new and existing customer relationships and recommend bank products and services to support their financial success, • Follow established policies in accordance with the bank and the supervisor s direction, • Accountable for the personal achievement of monthly new account production as assigned by upper management, • Participate in an active sales environment that may require in-store aisle prospecting, • Process deposits and pay out funds in accordance with bank procedures, to record all transactions accurately and balance each day's operations, • Receive cash and checks for deposit, verify amounts, and look for check endorsements, • Examine cash carefully to guard against acceptance of counterfeit checks and identification, • Enter transactions into computer and issue customer receipts, • Sell and prepare money orders, cashier's checks, bank-to-bank wires, and certificates of deposit, • Process western union wires and cash advances, • Cross-sell bank services and products, • Provide bank services to a diverse customer base, including a large Spanish speaking population, • Perform other tasks requested by supervisors as they relate to the bank and its functions, • Regular and predictable attendance and punctuality * Approval limits will be based upon established authority levels Environmental and Physical Requirements: • Required to stand or walk for extended periods of time dependent upon branch location, • Ability to work in a high volume, stressful and noisy environment, • Schedules are prepared based on business need and subject to change at any time, • Operate a computer and other office machinery, • Ability to lift up to 50 lbs. FNBT is an equal opportunity employer.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Automotive Technician to support our Truck Fleet in Houston, Texas Hear it from a Torque Mobile Mechanic Technician Here: https://RyderCareers.Video/TorqueMMT • Technician Positions Pay Each Week, • Hourly Pay: $35.00 per hour based on experience, • Retention Bonus: $2000 paid every quarter within the first year, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided, • Grow with Ryder: This position provides additional training to level up. We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Light Duty Trucks. Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Jordon or text "Houston" to 904-869-3454 to speak with your recruiter today. All the benefits you expect — without the wait. • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development, • Employee & Customer Referral Bonus program Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Professional diploma preferred, • Three (3) years ormore in combination of classroom training and work experience, • NonCommercial Driver License CLASS E, • Valid Commercial Driver License (CDL) CLASS A preferred, • State driver's license as required, • Ability to:, • Understand and adhere to Company policies in all areas, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Capable of multi-tasking, highly organized, with excellent time management skills, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • Possesses flexibility to work in a fast paced, dynamic environment, • Excellent organizational skills, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Perform diagnosis, repairs, inspections and preventative maintenance for non-contractual customers. May assist higher-grade Automotive Maintenance Specialists and assist them in completing complex diagnostic repairs., • Perform routine vehicle maintenance including, but not limited to, tune-ups, oil changes, tire changes, fuel filter changes, fluid checks, alignments, basic suspension replacement and light and mirror replacements., • Ability to diagnose, repair or replace engines parts including but not limited to alternators, starts, radiators, and injectors, transmissions and other fuel components., • Perform basic diagnostics., • Hydraulic brake inspections, repairs, and replacements., • May operate out of mobile maintenance vehicle and travel to customer yards within assigned region., • Possess general knowledge and understanding of the Torque products and services., • Represent Torque/Ryder to establish a relationship with the customer., • Utilize key functions of Salesforce and electronic documentation available. Ensure proper documentation of work orders, customer repair authorizations, and repair notes are within Salesforce., • Perform environmental duties such as site inspections, site clean-ups/disposals, vehicle chemicals with some guidance and direction., • Work in accordance with all federal/regional and corporate compliance guidelines., • Perform other duties as assigned. Posted Date 2 weeks ago (8/19/2026 4:46 PM) Requisition ID 2026-208664 Location (Posting Location) : State/Province TX Location (Posting Location) : City HOUSTON Location (Posting Location) : Postal Code 77061 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements 10-20% Position Code 1001719 Min Pay USD $35.00/Hr. Max Pay USD $35.00/Hr.

Job DescriptionAdvanced Containment Systems, Inc. believes in providing an atmosphere that provides an individual the ability to exercise their talents and abilities in a fair and respectful workplace. As a manufacturer of custom transportable products to address the restroom/shower trailer, homeland security, abatement, first responder and military industries, we offer a stable work environment that is not impacted by the oil and gas sector and as an EEO/AA employer we welcome all individuals an opportunity to come and join our growing team in South Houston! Multiple Openings Available!Purpose for the position:Perform skilled work involving plumbing under the direction of area supervisor and/or lead man in assigned department, including but not limited to Water supply lines assemblies, DWV line assemblies and common plumbing connection (connection sinks, toilets exc.).Essential job functions:Verifies conformance of finished goods.Ensures quality in every task performed.Builds product to design specification utilizing drawings.Maintains a clean and safe work environment.Adheres to all company general and safety policies Knowledge, skills and abilities:Ability to carry out not only simple but complex oral and written instructions.basic math skillsAbility to read and understand English.Ability to operate hand tools including but not limited to drills; grinders; heat guns; rivet guns.Ability to comprehend additional training in relation to the performing of the work duties.Ability to cross train and perform many different tasks across multiple departments.High level of attentiveness and physical coordination to perform the work activities safely and productively. Schedule & Physical demands:Most of the work tasks are performed in-door and subjected to environmental and weather condition changes.Hours: 8 or more hours per dayWeek: 40 or moreLunch: Half hourSitting/standing: Stands 100 % of the timeEnvironment: Shop is not air-conditionedStress: MediumPhysical task: Must bend, squat, lift, push or pull material up to 50 lbs frequently. Job Posted by ApplicantPro

Job Description Astro Pak is the nation's leading precision cleaning and passivation contractor specializing in on-site cleaning of high purity gas and fluid systems, as well as precision cleaning of components and hardware at the company's Cleanroom facilities. Astro Pak provides services to over 15 sectors including: Data Centers, Biotechnology, Pharmaceutical, Aerospace, Semiconductor, and other selected Industrial markets. The company, founded in 1959, has performed on-site precision chemical cleaning in every State of the Union as well as several projects in Asia, Canada, continental Europe, England, Ireland and Mexico. Frontline Global Services, an Astro Pak company Frontline Global Services, now part of Astro Pak, is seeking mechanically inclined, safety-focused individuals to join our Field Services team. This is a hands-on, travel-intensive position supporting industrial maintenance, cleaning, and equipment reliability projects at customer facilities throughout the United States. You'll work alongside experienced field professionals while developing specialized skills in industrial equipment, high-velocity flushing, chemical cleaning, filtration, decontamination, and related services. This position requires extensive travel and extended periods away from home. Project schedules may include days, nights, weekends, 12-hour shifts, and consecutive workdays based on customer and project requirements. What You'll Do • Set up, operate, monitor, and tear down specialized industrial equipment and temporary systems, • Support high-velocity flushing, chemical cleaning, filtration, decontamination, fluid transfer, and other industrial service projects, • Work with pumps, hoses, piping, valves, fittings, filtration equipment, tanks, and related equipment, • Assist with pipe-fitting, equipment inspections, fluid sampling, basic field testing, and project documentation, • Learn to read and apply P&IDs, procedures, permits, JSAs, SDSs, and other technical and safety documentation, • Participate in project mobilization, site setup, equipment monitoring, teardown, and demobilization, • Inspect and properly care for company tools, vehicles, and equipment, • Identify and promptly report safety concerns, equipment issues, project risks, and opportunities for improvement, • Maintain safe, clean, and organized work areas, • Communicate professionally with customers, subcontractors, supervisors, and fellow team members, • Follow all company and customer safety, environmental, quality, and operating requirements What We're Looking For We're looking for people with strong mechanical aptitude, a commitment to safety, and a willingness to learn. Previous industrial experience is valuable but is not required for every candidate. Minimum Qualifications • Mechanical aptitude and interest in working with industrial equipment and systems, • Commitment to safe work practices and following established procedures, • Dependable, team-oriented, and able to adapt to changing project conditions, • Ability to understand and follow written and verbal work instructions, • Ability to accurately communicate and document basic project information, • Valid driver's license and ability to meet applicable company driving requirements, • Ability and willingness to travel extensively, including assignments with limited notice, • Ability to work varying schedules, including days, nights, weekends, extended shifts, and consecutive workdays as project requirements dictate, • Ability to remain away from home for extended project assignments, which may last several weeks, • Ability to obtain required customer or site credentials, including a TWIC card when applicable, • Ability to meet applicable pre-employment and customer-site requirements, • Willingness to obtain a Class A CDL within the required timeframe if the position requires commercial vehicle operation Physical & Work Environment Requirements This is an active field position performed primarily in industrial environments. With or without reasonable accommodation, employees must be able to perform the essential functions of the position, which may include: • Frequently standing, walking, bending, reaching, climbing, and working around industrial equipment, • Lifting, carrying, pushing, or pulling equipment and materials weighing up to 50 pounds, • Working indoors and outdoors in varying weather and environmental conditions, • Working at heights and in confined spaces when properly trained, equipped, and authorized, • Wearing required personal protective equipment (PPE) and respiratory protection when applicable, • Working extended shifts and physically demanding project schedules Preferred Qualifications Any of the following experience or credentials are a plus: • Industrial or mechanical maintenance, • High-velocity flushing or chemical cleaning, • Pumps, piping, hydraulics, filtration, or machinery lubrication, • Plant outages, turnarounds, commissioning, or industrial construction, • Industrial field service, • Confined-space work, • Class A CDL or commercial vehicle experience, • OSHA 10 or OSHA 30, • HASC or equivalent industrial safety training, • Forklift certification, • TWIC card, • Mechanical, industrial, technical, or vocational education What You'll Learn Frontline and Astro Pak invest in hands-on training and professional development. Depending on your assignments, you may develop skills in: • High-velocity oil flushing, • Chemical cleaning and decontamination, • Industrial filtration, • Fluid handling and sampling, • Machinery lubrication, • Hydraulic and fluid power systems, • Industrial piping and pipefitting, • Lockout/Tagout (LOTO), • Confined-space operations, • Reading P&IDs and technical documentation, • Equipment monitoring and troubleshooting, • Industrial project execution and safety Benefits Eligible employees may have access to benefits including: • Medical insurance, • 401(k) with company match, • Per diem for qualifying travel assignments, • Paid travel and standby time in accordance with company policy, • Company-provided uniforms, • Company-paid training and professional development, • Support obtaining required certifications and qualifications, • Opportunities for advancement as technical and leadership skills develop Specific eligibility, coverage, and benefit terms are governed by applicable company plans and policies. About Frontline Global Services & Astro Pak Frontline Global Services is part of Astro Pak, expanding our capabilities in industrial maintenance, cleaning, and equipment reliability services. Our field teams support customers during new construction, pre-commissioning, outages and turnarounds, emergency events, and routine maintenance. Services include high-velocity flushing, chemical cleaning, equipment and system decontamination, filtration, condition monitoring, and reliability support. We serve customers across industries including refining and petrochemical, power generation, steel and primary metals, aerospace, mining, marine, natural gas, renewable energy, and other industrial markets. At Astro Pak, safety, quality, technical excellence, and customer service are fundamental to how we work. We're looking for individuals who share those values and want to build specialized technical skills in a hands-on field environment. If you're mechanically inclined, enjoy solving problems, and are ready for a career that combines travel, teamwork, and technical development, we encourage you to apply. Astro Pak, LLC is an equal opportunity employer. We provide equal employment opportunity to all qualified applicants and employees without regard to race, color, religion, sex (including pregnancy, sexual orientation, gender identity), age (40 or older), national origin, disability, genetic information, or protected veteran status. We will reasonably accommodate applicants or employees with disabilities, and comply with all applicable federal, state, and local anti-discrimination laws.

Job Description At HVAC RNTL, we move fast—delivering commercial HVAC rental solutions when and where they're needed most. From one-ton spot coolers to large-scale chillers and cooling towers, our team responds with speed and precision, whether it's a planned project or a 24/7 emergency. If you're wired for problem-solving and thrive in a fast-paced environment, you'll fit right in. Our people set us apart—and with locations across the U.S., there's room to grow, take on big challenges, and make an immediate impact. Master HVAC Mechanic Reports to: National Service Leader FLSA Status: Non-Exempt The Company From a single spot cooler, to a fully-customized chiller system, and everything in between – HVAC RNTL delivers the results our partners need when and where they need them. Whether it's a planned shutdown or 24/7 emergency services, our expert rental specialists work with customers every step of the way to get their HVAC system back up and running. Our team is growing – and we're looking for fast-thinking problem solvers who are unrelentingly responsive and thrive in an ever-changing environment. With locations across the US, our people are what set us apart from the competition and our team is constantly seeking to add talented individuals. Interested in joining us? The Opportunity We are seeking an experienced Master HVAC Technician. This position requires an advanced skill level with performing installation and start-up of equipment with the ability to troubleshoot and repair applied HVAC equipment on job sites. The Master HVAC Technician is responsible for depot maintenance and repair, along with customer education. An ideal candidate will be customer service oriented and work well with others. The position requires a high level of correspondence with Project Managers, Service Coordinators and customers. Responsibilities • Performs installation and start-up of equipment with the ability to troubleshoot and repair applied HVAC equipment on job sites, including customer training., • Performs depot maintenance, testing, repair and customer education on all applied equipment., • Performs live circuit troubleshooting of applied equipment up to 1000 tons., • Provides remote technical support for applied equipment., • Performs job site walks to support equipment sales., • Commission low temperature applications., • Ability to install and commission water-cooled chiller projects., • Ability to install and commission advanced air-cooled chiller projects using multiple pumps and heat exchangers., • Ability to plan and install cold storage systems using air-cooled chillers and air-handlers., • Ability to layout slip stream projects using multiple chillers to provide an out of design TD requirement. The Required Profile • High School Diploma or equivalent, • Must have valid driver's license with good driving record, • Must have current HVAC certification and OSHA 10 Training plus 5-15 years' experience working as a Service Technician in a commercial environment, • Previous experience of 5+ years in chiller/HVAC maintenance, mechanical engineering, or other related fields., • Electrical knowledge required and EPA Certification Preferred (i.e. HVAC Journeyman, Boiler Operator, Gas Installer, etc.), • Familiarity with manufacturing designs or schematics., • Strong problem solving and critical thinking skills., • Ability to prioritize and multitask., • Good analytical skills, attention to detail, and ability to train junior technicians., • Excellent customer service skills with desire to exceed customer expectations., • Ability to work independently in a timely manner, making sure job is done correctly the first time., • Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e. Smartphone, iPad), • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds, • Ability to work independently with minimal supervision and balance requirements of multiple and varied duties Other Skills & Abilities Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites on a daily basis. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. HVAC RNTL is an Equal Opportunity Employer Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job DescriptionDescription: The HVAC & General Property Maintenance Technician is a dual-skilled professional responsible for maintaining HVAC systems and performing a wide variety of general property maintenance tasks at multi-family residential properties. This role ensures tenant satisfaction by keeping properties functional, safe, and visually appealing while adhering to safety and compliance standards. Requirements: Key Responsibilities: HVAC Maintenance: • Inspect, troubleshoot, and repair HVAC systems, including furnaces, air conditioners, boilers, and heat pumps, ensuring optimal performance and energy efficiency., • Conduct preventive maintenance such as cleaning coils, replacing filters, lubricating components, and checking refrigerant levels per manufacturer specifications., • Respond promptly to HVAC-related maintenance requests, diagnose issues using diagnostic tools, and determine appropriate repair actions., • Install new HVAC systems or components, adhering to building codes and regulations., • Maintain accurate records of HVAC repairs, preventive maintenance, and inspections using maintenance management systems. General Maintenance and Repairs: • Perform plumbing, electrical, and mechanical repairs, including diagnosing and addressing system malfunctions., • Conduct carpentry tasks such as repairing or replacing doors, windows, cabinets, and flooring., • Address tenant maintenance requests promptly, prioritizing tasks based on urgency., • Perform painting and patching to maintain or enhance property aesthetics., • Ensure the proper upkeep of building systems and equipment, reporting any issues requiring specialized repairs. Groundskeeping and Landscaping: • Maintain the exterior of the property, including landscaping tasks such as mowing, trimming, and debris removal., • Handle seasonal maintenance like snow and ice removal and clearing walkways., • Safety and Compliance:, • Conduct regular inspections to identify hazards, ensure compliance with safety regulations, and mitigate risks., • Adhere to all local building codes and environmental standards., • Recordkeeping and Communication:, • Maintain detailed records of maintenance activities, materials used, and inspections performed., • Communicate effectively with property management, tenants, and team members regarding maintenance needs and project updates., • Other Responsibilities:, • Perform other duties as requested by the supervisor. Requirements: • High school diploma or equivalent; HVAC certification is required., • Proven experience in HVAC maintenance and general property maintenance., • Strong understanding of building systems, equipment, and repair techniques., • Proficiency in using diagnostic tools, hand tools, and power tools., • Ability to interpret technical manuals, schematics, and blueprints., • Strong problem-solving skills with attention to detail., • Excellent communication and interpersonal skills., • Physical ability to lift heavy objects, climb ladders, and work in varying weather conditions., • Valid driver’s license and a reliable personal vehicle for work tasks, including: Visiting tenant apartments for maintenance. Traveling between the property garage and job sites for parts and repairs. Procuring repair materials from local stores (e.g., Home Depot or Lowe’s). Mileage reimbursement provided per company policy for work-related travel. Compensation: Competitive salary with a generous benefits package. Job Type: Full-time Schedule: 8-hour shift & on-call rotation. Overtime: Responsibilities may involve Over-Time to meet the changing needs of the organization. #MT

Job Description HVAC Service Technician$28–$40/Hour + Spiffs & Bonuses | Overtime Available | Houston, TXEnvironmental Air Systems, Inc. is growing our Houston team and looking for an experienced Residential HVAC Service Technician who wants dependable year-round work, competitive pay, and the opportunity to continue developing their technical skills.For more than 43 years, we've remained committed to providing homeowners throughout the Houston area with dependable HVAC solutions. As a locally owned and operated Texas company, we're proud to invest in the people who make our success possible. Our reputation has been built through quality work, honest service, and strong relationships with both customers and employees.What You'll Be DoingAs a Residential HVAC Service Technician, you'll be responsible for diagnosing system issues, recommending solutions, and completing quality repairs in residential settings. You'll primarily work on residential equipment while also having the opportunity to gain experience servicing select light commercial systems.Your day-to-day work will include:Diagnose heating and cooling system problems and determine appropriate repair solutions.Perform residential HVAC repairs and troubleshoot system performance issues.Conduct preventative service and evaluate equipment condition.Work on select light commercial HVAC systems, including equipment up to 30 tons.Clearly communicate system issues, repair recommendations, and options to homeowners.Provide courteous, professional service throughout every customer interaction.Enter accurate service information and job documentation using company technology.Maintain safe work practices and uphold the company's standards for quality and professionalism.Pay & ScheduleYour experience is rewarded with competitive hourly compensation plus opportunities to increase your earnings.$28–$40 per hour, based on experienceSpiffs and performance bonuses40+ hours per weekOvertime opportunitiesAutomatic overtime pay for work performed before 6:00 AM or after 6:00 PMMonday–Friday scheduleBenefits & PerksWe provide our technicians with the equipment, benefits, and support needed to build a long-term career.Company-provided vehicleHealth insurance optionsHSA plan options0% coinsurance plan optionsPaid holidaysPaid vacationCompany uniformsCompany tabletTool assistance programOngoing technical trainingCareer advancement opportunitiesSIMPLE IRA retirement plan with company matchWhat We're Looking ForThis role is designed for an HVAC professional who already has residential field experience and is ready to continue growing.Required qualifications:Minimum 2 years of residential HVAC service or installation experienceEPA Universal CertificationTexas Technician RegistrationValid driver's licenseInsurable driving recordWillingness to learn and develop light commercial HVAC skillsPreferred qualifications:HVAC trade school educationPrevious commercial HVAC experienceGrow With a Company That Invests in Its PeopleEnvironmental Air Systems has spent more than four decades building a business based on craftsmanship, integrity, and customer trust. Because we're locally owned, our employees aren't simply another number in a large corporate organization.Our leadership is actively involved in the HVAC industry and is committed to helping our technicians strengthen their skills and advance their careers. You'll have access to training, support, and opportunities to expand your experience beyond residential service.If you're an experienced HVAC service technician looking for competitive pay, additional earning opportunities, overtime, and a locally owned company that values its people, apply today.

Job DescriptionThe Financial Services Representative (FSR) is responsible for driving loan sales, managing past-due accounts, preparing tax returns, and working directly with customers to meet financial needs. This role requires daily outbound calling, including high-volume collection activity, meeting with customers in person, and closing loans. The FSR is accountable for keeping accounts current while consistently generating new business. Success in this role requires the ability to manage a fast-paced workload, handle challenging conversations, and meet performance goals across sales, collections, tax services, and branch operations, with opportunities for performance-based earnings and advancement. Compensation $15–$16 per hour, based on experience and location, plus performance-based bonus opportunities. Total earnings increase with strong individual and branch performance. Bilingual in English and Spanish required Why Join World: Strong growth opportunities – Many of our leaders, including executives, started in this role Promote-from-within culture – A large percentage of team members advance into leadership roles Performance-based earnings – Bonus opportunities tied to branch results Comprehensive benefits for all stages of life – Including major medical, dental, vision, life insurance, long-term disability, and free mental health support Retirement and time off – 401(k) with company match, paid holidays, and vacation time Community focus – Paid volunteer time and a strong commitment to giving back Work-life balance – Predictable schedules with a focus on time outside of work About World Finance: World Finance has been recognized as a Top Workplace USA for six consecutive years and a Newsweek Most Trustworthy Company. Since 1962, we have helped millions of customers meet their financial needs through personal loans, tax services, and credit-building solutions. With over 1,000 branches across 16 states, we are committed to serving the communities where we live and work. Essential Duties and Responsibilities: Drive and close loan sales by taking applications, explaining terms, and asking for the business Conduct substantial daily outbound customer outreach for collections, application follow-up, tax services, and new business generation; thrive in a high-volume, phone-intensive environment Manage delinquent accounts by securing payments and setting payment arrangements Contact approved, pending, and former borrowers to drive loan volume and identify opportunities for additional financial products and services Prepare individual tax returns, gather and review required documentation, and assist customers with tax-related questions in compliance with company policies and applicable regulations Assist customers in person with loan applications, tax preparation services, payments, account questions, and issue resolution Process payments, account updates, tax-related documentation, and document all activity in company systems Maintain accurate and compliant records, including timely credit denial letters and required tax documentation Handle and balance cash, and complete required bank runs to deliver deposits Follow company policies, procedures, and regulatory requirements Complete required training and meet performance expectations for sales, collections, tax preparation, and account management Basic Requirements: High school diploma or equivalent Valid driver’s license, reliable transportation, and current insurance Must be able to independently perform all required bank runs, including transporting deposits, without relying on non-employees for transportation Ability to obtain required insurance licensing Experience & Skills: Experience in sales, customer service, collections, or account management with measurable results Proven ability to handle high-volume calls and difficult customer conversations Track record of meeting or exceeding goals in a fast-paced environment Strong communication, problem-solving, and organizational skills Basic computer skills with accurate and consistent data entry Preferred Backgrounds: Experience in banking, retail, restaurants, hospitality, collections, call centers, insurance, healthcare front office, or similar customer-facing roles is preferred. Physical and Environmental Requirements: Office based role with standard lighting and noise levels Regular in-person attendance during scheduled work hours is essential; occasional extended hours or weekend work may be required based on business needs Combination of stationary work and regular movement throughout the office, including occasional walking, standing, bending, reaching, and similar activities Occasional light lifting, pushing, or pulling of office materials (generally up to 30 pounds) Ability to perform computer work, handle documents, and communicate information effectively Fast paced environment with shifting priorities and deadlines; requires professionalism, adaptability, collaboration, and multitasking Frequent interaction with customers and coworkers; must communicate clearly and professionally in person, by phone, and electronically May assist with general office upkeep to maintain a professional environment Occasional local travel to offsite locations and banks as required for business purposes It is the policy of World Acceptance Corporation to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. The duties listed are the essential functions of this position. Reasonable accommodations may be made unless they create an undue hardship to the Company. Physical and environmental requirements are representative of those needed to successfully perform the job.

Job Description Who We AreThermon is a diversified technology company and a global leader in industrial process heating, temperature maintenance, environmental monitoring and temporary power distribution solutions. We deliver engineered solutions that enhance operational awareness, safety, reliability and efficiency to deliver the lowest total cost of ownership.Thermon offers over 250 products, software and services across multiple brands, providing a range of offerings from boilers, transportation heaters, and liquid load banks to tubing bundles and heat trace. We are the silent guardians of critical infrastructure. From the relentless demands of chemical plants and the intricate networks of rail and transit to the vital pulse of power generation, we innovate solutions that ensure optimal operation, protect critical assets, and maximize efficiency.We care deeply about the success of our customers, the well-being of our people, and the reliability of every product we design. This drives our unwavering commitment to safety and integrity in everything we do. Through collaboration, we unite a rich legacy of expertise with a trusted global team, partnering side-by-side with our customers. We transfer the warmth needed to make life work. The RoleMust be able to maintain an orderly in-field stock of materials, deliver materials to work stations in a prompt and precise manner, and assist/make cable pulls, running conduit, and erecting cable tray. Rate will depend on experience and passing electrician test.What You Will DoTesting electrical and mechanical circuits for efficiency.Testing, Reading, Operating, Maintaining, Repairing Electrical and Heat Trace systems.Reading and comprehending electrical blue prints, schematics, one-line diagrams.Install, test, and commission Electric Heat Tracing.Following electrical codes and regulations set by the State of Texas and the US Gov. Proficient in reading and following directions, writing reports.Unload delivery trucks.Assembling, installing, maintaining, and repairing electrical and mechanical systems.Performing maintenance and repair of electrical, interior, and exterior electrical components.Available for Schooling and training.Have your own hand tools.To be successful in this role you will possessIndustrial Construction Experience in a fast-paced business environment is a plusHigh school and or trade school required.Must put safety above allElectrical LicenseNCCER certification/or equivalent work experience.TWIC card required (Transportation worker Identification card) Industrial experience. SCADA, PLC and Control Automation i.e. Energy Management Controls preferredProven history of leading, teaching, developing, and mentoring others successfully is a plus.Professional, Organized and dedicatedAbility to handle stressful situationsExcellent communication and personal skillsMust be able to understand and communicate in EnglishAbility to perform work in industrial facilities in extreme ambient conditions including climbing staircases, or laddersWe wish to thank all applicants for their interest, however, only those invited for an interview will be contacted.

Job DescriptionThe Financial Services Representative (FSR) is responsible for driving loan sales, managing past-due accounts, preparing tax returns, and working directly with customers to meet financial needs. This role requires daily outbound calling, including high-volume collection activity, meeting with customers in person, and closing loans. The FSR is accountable for keeping accounts current while consistently generating new business. Success in this role requires the ability to manage a fast-paced workload, handle challenging conversations, and meet performance goals across sales, collections, tax services, and branch operations, with opportunities for performance-based earnings and advancement. Compensation $15–$18 per hour, based on experience and location, plus performance-based bonus opportunities. Total earnings increase with strong individual and branch performance. Bilingual in English and Spanish required Why Join World: Strong growth opportunities – Many of our leaders, including executives, started in this role Promote-from-within culture – A large percentage of team members advance into leadership roles Performance-based earnings – Bonus opportunities tied to branch results Comprehensive benefits for all stages of life – Including major medical, dental, vision, life insurance, long-term disability, and free mental health support Retirement and time off – 401(k) with company match, paid holidays, and vacation time Community focus – Paid volunteer time and a strong commitment to giving back Work-life balance – Predictable schedules with a focus on time outside of work About World Finance: World Finance has been recognized as a Top Workplace USA for six consecutive years and a Newsweek Most Trustworthy Company. Since 1962, we have helped millions of customers meet their financial needs through personal loans, tax services, and credit-building solutions. With over 1,000 branches across 16 states, we are committed to serving the communities where we live and work. Essential Duties and Responsibilities: Drive and close loan sales by taking applications, explaining terms, and asking for the business Conduct substantial daily outbound customer outreach for collections, application follow-up, tax services, and new business generation; thrive in a high-volume, phone-intensive environment Manage delinquent accounts by securing payments and setting payment arrangements Contact approved, pending, and former borrowers to drive loan volume and identify opportunities for additional financial products and services Prepare individual tax returns, gather and review required documentation, and assist customers with tax-related questions in compliance with company policies and applicable regulations Assist customers in person with loan applications, tax preparation services, payments, account questions, and issue resolution Process payments, account updates, tax-related documentation, and document all activity in company systems Maintain accurate and compliant records, including timely credit denial letters and required tax documentation Handle and balance cash, and complete required bank runs to deliver deposits Follow company policies, procedures, and regulatory requirements Complete required training and meet performance expectations for sales, collections, tax preparation, and account management Basic Requirements: High school diploma or equivalent Valid driver’s license, reliable transportation, and current insurance Must be able to independently perform all required bank runs, including transporting deposits, without relying on non-employees for transportation Ability to obtain required insurance licensing Experience & Skills: Experience in sales, customer service, collections, or account management with measurable results Proven ability to handle high-volume calls and difficult customer conversations Track record of meeting or exceeding goals in a fast-paced environment Strong communication, problem-solving, and organizational skills Basic computer skills with accurate and consistent data entry Preferred Backgrounds: Experience in banking, retail, restaurants, hospitality, collections, call centers, insurance, healthcare front office, or similar customer-facing roles is preferred. Physical and Environmental Requirements: Office based role with standard lighting and noise levels Regular in-person attendance during scheduled work hours is essential; occasional extended hours or weekend work may be required based on business needs Combination of stationary work and regular movement throughout the office, including occasional walking, standing, bending, reaching, and similar activities Occasional light lifting, pushing, or pulling of office materials (generally up to 30 pounds) Ability to perform computer work, handle documents, and communicate information effectively Fast paced environment with shifting priorities and deadlines; requires professionalism, adaptability, collaboration, and multitasking Frequent interaction with customers and coworkers; must communicate clearly and professionally in person, by phone, and electronically May assist with general office upkeep to maintain a professional environment Occasional local travel to offsite locations and banks as required for business purposes It is the policy of World Acceptance Corporation to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. The duties listed are the essential functions of this position. Reasonable accommodations may be made unless they create an undue hardship to the Company. Physical and environmental requirements are representative of those needed to successfully perform the job.

Job Description Texas AirSystems has been shaping the HVAC landscape in Texas for over four decades. With 500+ team members and seven offices statewide, we partner with over 60 leading manufacturers to deliver custom, high-performance solutions that stand the test of time. Here, your work matters. You'll be part of a team that values collaboration, rewards curiosity, and gives you the tools to keep growing. Whether you're just getting started or looking for your next big challenge, this is a place where you can thrive and make a real impact. Controls Service Technician Reports to: Service Manager FLSA Status: Non-Exempt, Hourly The Opportunity We are seeking an experienced Controls Service Technician to work as part of a team responsible for start-up, troubleshooting, commissioning, servicing, and training of DDC Building Automation Systems. This position requires the ability to communicate clearly with customers, mechanical contractors, mechanical engineers, and co-workers. Responsibilities • Build and maintain customer relationships, primarily focused on occupied building contracts, • Analyze problems and resolve issues to ensure proper system functionality, • Explore and report opportunities for advanced solutions for building operations and energy savings, • Creation and modifications of animated graphics and minor software changes, • Performs service repairs, adjustments, and calibration on Building Automation Systems, • Provide technical support and training to customers as applicable, • Checkout, start-up, and commissioning on controls projects, • Mentoring and assisting peers as applicable The Required Profile • High School Diploma, Military Service and/or Trade School education, • Minimum of five (5) years of experience with HVAC Building Automation Systems, specifically with Niagara, • Niagara AX and N4, Honeywell Webs is a plus, familiar with other control systems, • Deep understanding of BACnet protocol, with some Lonworks and Modbus experience, • Must have good computer skills and be familiar with IP networks, • Communication skills required (both verbal and written), • Flexible to work overtime, weekends and/or an on-call schedule as needed, • Proficient in reading plans, submittal drawings and wiring diagrams, • Must have experience using various hand and power tools, • Ability to travel out-of-town occasionally may be required, • Valid driver's license with clean driving history Other Skills & Abilities Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites on a daily basis. Personal and Interpersonal Skills Ability to establish and grow relationships with customers through effective verbal and written communication. Dedicated to the needs of the customers, manufacturers and peers and has the patience to actively listen to all business partners. Able to solve problems and skillfully negotiate with a minimum of noise while managing stress. Demonstrates integrity and trust through appropriate directness and truthfulness. Ability to understand personal strengths and weaknesses, seek feedback and improve upon shortcomings. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds, occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job DescriptionAbout the Role: Join PREMIER CHAMPION BUILDERS LLC as an Apartment HVAC Technician in Houston, TX! In this dynamic role, you'll ensure optimal heating and cooling systems for our apartment communities, contributing to the comfort and satisfaction of our residents. Responsibilities: • Install, maintain, and repair HVAC systems in apartment units., • Conduct routine inspections to identify and troubleshoot HVAC issues., • Respond promptly to service requests and emergency calls., • Ensure compliance with all safety and environmental regulations., • Maintain accurate records of work performed and parts used., • Communicate effectively with residents regarding HVAC concerns., • Collaborate with team members to improve service efficiency., • Stay updated on industry trends and best practices.Requirements:, • High school diploma or equivalent; technical certification preferred., • 2+ years of experience in HVAC installation and repair., • Valid HVAC certification and relevant licenses., • Strong knowledge of HVAC systems and components., • Excellent problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • Strong communication and customer service skills., • Willingness to work flexible hours, including weekends.About Us: PREMIER CHAMPION BUILDERS LLC has been a trusted name in Houston for over a decade, specializing in quality construction and maintenance services. Our commitment to excellence and customer satisfaction has earned us a loyal client base, and our employees enjoy a supportive and rewarding work environment.

Job Description Texas AirSystems has been shaping the HVAC landscape in Texas for over four decades. With 500+ team members and seven offices statewide, we partner with over 60 leading manufacturers to deliver custom, high-performance solutions that stand the test of time. Here, your work matters. You'll be part of a team that values collaboration, rewards curiosity, and gives you the tools to keep growing. Whether you're just getting started or looking for your next big challenge, this is a place where you can thrive and make a real impact. Reports to: Area Service Manager FLSA Status: Non-Exempt Location: Missouri City, TX The Opportunity We are seeking an experienced Commercial HVAC Service Technician. This position will work as part of our dedicated team that services our contract with Lamar Consolidated Independent School District. This position will be responsible for performing electrical and mechanical inspection, start-up maintenance on the equipment we sell. This is a full-time opportunity for an energetic go-getter. An ideal candidate will be customer service oriented and work well with others. Position requires a high level of correspondence with Project Managers, Service Coordinators and customers. Responsibilities • Performs electrical and mechanical inspection and maintenance on equipment to ensure peak performance, • Perform specific preventative maintenance including belt adjustments, oiling, greasing and cleaning of equipment, • Uses experience and technical skills with preventive maintenance and system operations to determine service requirements, • Ability to interpret engineering drawings in reference to layout, location and operation of the system(s), • Represents the company in a positive manner to other trades, contractors and owners, • Advises owner/representative of preventive maintenance inspections performed and corrective actions to be taken, • Suggest additional services that are beneficial to customer, • Works in a team-based environment to share information and workload while ensuring customer satisfaction, • Submits required paperwork to Service Coordinator in a timely manner, • Must work in a safe manner on a daily basis and ensure that all safety measures are taken at all times, • Performs other duties as assigned, • Flexibility to work overtime/ weekends, as required The Required Profile • High School Diploma or equivalent, • Must have valid driver's license with good driving record, • Must have current HVAC certification and OSHA 10 Training plus 5+ years' experience working as a Service Technician in a commercial environment, • Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad), • Electrical knowledge required and EPA Certification Preferred (i.e. HVAC Journeyman, Boiler Operator, Gas Installer, etc.), • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds, • Ability to work independently with minimal supervision and balance requirements of multiple and varied duties Other Skills & Abilities Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites on a daily basis. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job DescriptionDescription: Southern Home Services is a residential HVAC, Plumbing and Electrical company that acquires, owns, and operates businesses around the United States. We are seeking business leaders to join our growing team and become an integral part of our company's future. Are you ready to be Part of Something BIGGER! Nick’s Plumbing and Air Conditioning, a Southern Home Services Company, is looking for a dynamic HVAC Lead Install Technician to join a thriving business that believes in work life balance and cares about YOU! About this role: The HVAC Lead Install Technician is responsible for overseeing the installation, upgrade, and replacement of HVAC systems in residential properties. This role involves leading a team of technicians to ensure high-quality and efficient service delivery. The Lead Install Technician handles complex installations, provides technical expertise, and ensures compliance with industry standards and safety regulations. They are also responsible for customer interactions, resolving issues, and ensuring customer satisfaction. Additionally, the Lead Install Technician maintains a clean and organized work environment, manages inventory and tools, and contributes to team training and development. In this role, you will be responsible for: • Install, upgrade, and/or replace HVAC systems in residential homes with precision., • Cut, thread, and connect pipes (copper or PVC) and handle high and low voltage wiring., • Train and mentor Install Helpers on job sites and in the shop, enhancing their skills and knowledge., • Deliver exceptional customer service and communicate effectively with homeowners., • Handle physical tasks, including lifting, bending, and moving objects weighing over 50 pounds., • Maintain tools, parts, and the vehicle in an organized and clean condition., • Perform work safely at heights, in tight spaces (e.g., attics), and under various weather conditions (extreme heat or cold)., • Ensure adherence to appliance standards, the Occupational Health and Safety Act, and service standards., • Additional duties as assigned. Required Qualifications: • 2+ years of HVAC Lead experience, ideally within the residential market, showcasing hands-on technical skills., • Valid driver’s license and clean driving record., • Holds valid EPA certification for compliance with environmental regulations., • Possesses advanced troubleshooting and critical thinking skills to resolve complex HVAC issues., • Demonstrates a proactive and enthusiastic approach with a strong commitment to delivering high-quality work., • Prioritizes exceptional customer service and effectively addresses client needs and concerns., • Capable of interacting professionally with individuals at all levels within the organization., • Flexible and innovative, thriving in dynamic environments and collaborating well with others The physical requirements of this job include: • Lifting 50 pounds regularly and up to 100 pounds occasionally, • Climbing ladders, accessing attics, navigating tight spaces, driving, entering crawlspaces, pushing, carrying, pulling, using hand tools, and performing fine detail work., • Ability to drive., • Working in various environments, including indoor and outdoor settings, attics, crawlspaces., • Ability to stand, walk and sit; talk or hear, both in person and by telephone., • Use hands to handle or feel objects or controls; reach with hands and arms., • Regularly stoop, kneel, bend, and crouch., • The work requires regular exposure to extreme temperatures both indoors and outdoors, such as heat or cold, and adverse weather conditions such as wind, rain, ice or snow. Southern Home Services will make reasonable accommodations to allow an employee to perform the essential functions of the job. Benefits: We offer a rewarding career path with great benefits, flexible schedules, professional and on-the-job training, and growth plans. Be a part of the team our customers call the finest in the industry. • Reliable, Year-Round Work, • Weekly Paychecks, • Paid Time Off and Paid Holidays, • Comprehensive Medical, Dental and Vision Benefits, • Health savings accounting, • Flexible spending account, • Growth Opportunities, • Employee discounts, • Company paid short term life insurance, • Life insurance Southern Home Services is an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. The policy applies to all employment practices within our organization. Requirements:

Job Description MISTRAS Group is a global leader in technology-enabled asset protection, delivering advanced inspection, engineering, and data monitoring services to ensure the safety, compliance, and uptime of critical industrial infrastructure. The Acoustic Emission (AE) Trainee / Assistant Technician will assist a certified Level II NDE Technician with designated Acoustic Emission testing and structural health monitoring activities while gaining the required field experience and technical knowledge for formal certification. We are seeking a detail-oriented individual with a formal educational background in Non-Destructive Evaluation (NDE) and a strong technical mindset. The ideal candidate will be highly adaptable and enthusiastic about hands-on learning, particularly as it applies to mastering the Acoustic Emission (AE) inspection craft. MAJOR RESPONSIBILITIES/ACTIVITIES: • Assist certified technicians with the setup, calibration, and tear-down of Acoustic Emission (AE) data acquisition systems and specialized instrumentation., • Place, couple, and secure AE sensors on various structures (e.g., pressure vessels, storage tanks, and piping systems)., • Perform routine and preventive maintenance tasks, pre-test calibrations, and overall upkeep of testing equipment and facilities., • Assist with proper documentation, data logging, and drafting of technical services reports., • Learn, absorb, and strictly abide by company safety policies, industry standards (ASTM, ASME), and operating procedures., • Monitor testing environments to identify and help mitigate background mechanical or electrical noise that could interfere with data collection. MINIMUM REQUIREMENTS: • High school diploma or equivalent., • Completed foundational NDE/NDT training or technical schooling., • Strong mechanical aptitude with an interest in electronics, physics, or data acquisition software., • Ability to perform a wide variety of tasks and respond to short-notice work assignments, which requires occasional out-of-town and overnight travel., • Must be able to effectively communicate with clients, supervisors, and co-workers., • Must possess a valid driver’s license and have a clean driving record., • Ability to read technical documents, blueprints, and engineering specifications is preferred., • Proven ability to follow precise technical directions and safety procedures., • Proven ability to adapt to an ever-changing operational schedule. WORKING CONDITIONS & ESSENTIAL PHYSICAL FUNCTIONS: • Environment: Field duties require outdoor work in heavy industrial and plant environments. Working in plant and/or shop areas around production machinery with extreme noise levels., • Mobility: Sufficient personal mobility to maneuver safely within a refinery or plant environment, including the ability to gain access to elevated platforms via ladders, scaffolding, and stairwells., • Travel: May be at more than one job site on a daily basis, must tolerate changes in climate, and must be willing to travel out of town frequently / Must have or be willing to get a passport. International travel will be required for this position., • PPE: Must be able to wear all required safety equipment (PPE) as dictated by the safety department for personal protection., • Physical Strength: Ability to frequently lift and carry up to 50 pounds of equipment., • Sensory: Sufficient clarity of speech, hearing, and vision (with or without reasonable accommodations) to communicate effectively, observe field testing conditions, and conduct structural investigations. MISTRAS strives to provide a positive work environment that values excellence in safety and quality, free from discrimination and harassment. Every MISTRAS employee plays a part in our Company’s success and making this a great place to work. We are committed to a work place where all employees are free to raise issues, concerns and questions for the improvement of our operations and work environment. Safety is the overriding priority in everything we do; all duties critical to safety, quality, and environmental protection are carried out in compliance with all requirements and with personal accountability. Note to Applicants: Smoking is prohibited in all indoor areas of the Company unless designated smoking areas have been established by a particular location in accordance with applicable state and local law. Note to Rhode Island Applicants: The company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the states worker's compensation law. Initial ( if applicable) Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial ( if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled: #LI-JC1

Job Description Commercial HVAC Service Technician$28–$38/Hour + Spiffs & Bonuses | 40+ Hours | Overtime AvailableHouston, TXEnvironmental Air Systems, Inc. is looking for an experienced Commercial HVAC Service Technician to join our Houston-area field team. This is an opportunity to work on a broad range of commercial HVAC and refrigeration equipment while building a long-term career with an established, Texas-owned company.For more than 43 years, we've earned the trust of our customers through dependable service, quality workmanship, and straightforward business practices. We're proud to remain locally owned and operated with no private equity ownership, allowing our employees to directly contribute to the customers and communities we serve.We invest in our technicians through training, hands-on experience, and opportunities to expand their capabilities within the trade.The WorkThis is a hands-on commercial service position for a technician who enjoys troubleshooting equipment and tackling challenging mechanical and refrigeration problems.You'll work with a variety of commercial systems, including:Chilled water systemsCommercial package unitsLow-temperature refrigerationIce machinesCommercial HVAC equipmentOther mechanical and refrigeration systemsKey ResponsibilitiesDiagnose equipment failures and determine effective repair solutions.Troubleshoot electrical, mechanical, HVAC, and refrigeration-related issues.Complete service repairs and preventative maintenance on commercial equipment.Evaluate equipment performance and identify potential problems.Service and troubleshoot chilled water and refrigeration systems.Accurately document service calls, repairs, and equipment information using company technology.Communicate findings and recommendations clearly with customers.Maintain a professional approach while representing Environmental Air Systems in the field.Work alongside other technicians and team members to maintain high service standards.Compensation & HoursWe offer competitive hourly pay along with additional opportunities to increase your earnings.$28–$38 per hour, based on experiencePerformance-based spiffs and bonusesMonday–Friday schedule40+ hours per weekOvertime available as neededAutomatic overtime pay for work performed before 6:00 AM or after 6:00 PMWhat You BringWe're looking for an experienced commercial technician with the technical foundation to independently diagnose and service a variety of HVAC and refrigeration equipment.Required:3–5+ years of commercial HVAC service experienceStrong commercial HVAC troubleshooting abilitiesExperience with chilled water systems and refrigerationEPA Universal CertificationTexas Technician RegistrationValid driver's licenseInsurable driving recordPreferred:Experience servicing ice machinesAdvanced refrigeration experienceHVAC trade school education or formal technical trainingBenefits That Support Your CareerWe provide the tools and benefits needed to make this a long-term opportunity:Company-provided service vehicleMultiple medical insurance optionsHSA plan options0% coinsurance plan optionsPaid vacationPaid holidaysCompany uniformsCompany tabletTool assistance programContinued technical trainingCareer development and advancement opportunitiesSIMPLE IRA retirement plan with company matchStable, year-round employment with an established local companyWhy Environmental Air Systems?At Environmental Air Systems, you're joining a company with more than four decades of experience and a genuine commitment to the HVAC trade. Our leadership remains actively involved in the industry, and we're focused on helping our technicians continue learning and advancing.If you're a commercial HVAC service professional looking for strong hourly pay, bonus opportunities, overtime, quality benefits, and a locally owned company that invests in its technicians, we'd like to talk with you.Apply today and take the next step in your commercial HVAC career with Environmental Air Systems, Inc.Candidates will be required to pass a background check and drug test upon being given a conditional offer of employment.

Line of Business: Service & Support About Us Heidelberg Materials is one of the largest suppliers of building materials worldwide. In North America, the company operates more than 450 locations throughout the United States and Canada, employing approximately 9,000 people. What You'll Be Doing Monitor and control the cement manufacturing process from the Remote Optimization Center, based in Dallas, Texas. Review equipment status, process parameters, and alarms to ensure the plant operates within defined parameters and adheres to standard operating procedures. Ensure safe and continuous plant operations, maintaining product quality, and complying with environmental regulations. This is achieved through close coordination with plant personnel and other HROC staff. Identify and troubleshoot process and equipment issues, resolving them promptly by collaborating with plant and HROC teams to minimize downtime and production losses. Maintain accurate and up-to-date records of process parameters, equipment readings, and operational activities. These records support the analysis of operational data to detect trends, inefficiencies, and opportunities for improvement. What Are We Looking For Proven ability to safely operate a cement plant in a 24/7 environment, with extensive control room experience, disciplined decision making, strong understanding of kiln and mill processes, and familiarity with process control systems required to remotely operate a complex plant. Bachelor of Science/Engineering degree, preferably in Chemical, Industrial, or Manufacturing. Technical certifications or vocational training in process operations or a related field may be substituted for a degree. Strong analytical and problem-solving skills and attention to detail and a high degree of accuracy and precision. Excellent communication and the ability to collaborate effectively with maintenance, engineering, and production personnel. Ability to work 12-hour rotating shifts including nights, and weekends. Ability to travel within the United States and Canada as required. What We Offer Competitive base salary ranging from $84,900 to $113,193, and participation in our annual incentive plan. 401(k) retirement savings plan with an automatic company contribution as well as matching contributions. Highly competitive benefits programs are offered, including: Medical, Dental, and Vision coverage along with Prescription Drug Benefits. Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA). AD&D, Short- and Long-Term Disability Coverage, as well as Basic Life Insurance. Paid Bonding Leave, 15 days of Paid Vacation and 40 hours of Paid Sick Leave. Equal Opportunity Employer – Minority / Female / Veteran / Disabled As part of our hiring process, we may use AI-assisted tools to support the screening and evaluation of candidate applications and interviews. These tools help streamline the initial assessment, but all decisions about candidate advancement are made by human recruiters and hiring managers. While technology supports early steps, every interview will be handled by experienced recruiters and hiring managers to provide a personal touch.

Line of Business: Service & Support About Us: Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What you will be doing: Provide 24/7 Remote Monitoring, Operation, and Control of Plant Processes Provide continuous remote monitoring, operation, and control of cement and grinding plants across the United States and Canada from Heidelberg Materials’ centralized HROC operations center in Irving, TX Actively optimize cement manufacturing processes and assigned plant equipment using advanced control systems, automation platforms, and real-time data interfaces. Analyze process conditions, instrumentation data, alarms, and system trends to ensure stable, safe, and efficient operation within defined operating limits, while taking timely control actions as required. Make Critical Operational Decisions in a Highly Automated Environment In coordination with the plant, exercise sound operational judgment and decision-making authority in response to process deviations, alarms, and abnormal conditions, executing corrective actions in line with established procedures, escalation protocols, and safety requirements. Operate within a highly automated, data-driven environment leveraging advanced process control, predictive analytics, and AI-enabled tools to drive performance outcomes while maintaining full accountability for actions taken. Troubleshoot and Resolve Process, Equipment, and Control System Issues Identify, diagnose, and resolve process inefficiencies, equipment malfunctions, and control system issues in real time. Collaborate closely with plant operations, process engineering, systems engineering, reliability teams, and other HROC resources to stabilize operations, minimize downtime, protect production, and sustain safe and reliable plant performance. Collaborate Across the HROC Network to Optimize System Performance Share best practices, transfer operational learnings, and optimize overall system performance. Work across HROC and plant teams to identify common challenges, replicate proven solutions, and support consistent performance improvement. Champion Standard Operating Procedures (SOPs) and Operational Consistency Champion SOPs to ensure consistency, reliability, safety, and efficiency in remote operations. Support the development, application, and continuous improvement of standardized procedures, escalation protocols, operating playbooks, and best-practice routines. Drive Continuous Optimization and Automation Strategies Support and actively contribute to the deployment and refinement of advanced automation strategies, improve process stability, throughput, energy efficiency, reliability, and cost performance. Identify and implement improvement opportunities through data analysis, operational insights, and cross-plant knowledge sharing. Leverage Data to Improve Performance and Standardization Use data to identify trends, inefficiencies, recurring issues, and improvement opportunities. Drive standardization and replication of best practices by sharing insights, learnings, and performance improvement actions across the HROC network. Ensure Safe, Stable, and Compliant Operations Ensure the safe, continuous, and compliant operation of plant processes, maintaining adherence to safety procedures, operating standards, environmental requirements, and quality targets. What Are We Looking For: Bachelor of Science/Engineering degree, preferably Chemical, Industrial or Manufacturing. Technical certifications or vocational training in process operations or a related field may substitute for a degree. Previous experience in a similar industrial environment is desirable, but not required due to the comprehensive training program. This position offers a unique opportunity for a 6-to-8-month training period that includes comprehensive training in the cement manufacturing process/equipment and key responsibilities. Strong analytical and problem-solving skills and attention to detail, with a high degree of accuracy and precision. Excellent communication and the ability to collaborate with maintenance, engineering, and production personnel. Ability to work rotating 12-hour day/night shifts, weekends, and holidays to sustain uninterrupted plant operations. Ability to travel in both the United States and Canada as required. What We Offer: Competitive base salary and participation in our annual incentive plan. 401(k) retirement savings plan with an automatic company contribution as well as matching contributions. Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement - Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Equal Opportunity Employer - Minority / Female / Veteran / Disabled As part of our hiring process, we may use AI-assisted tools to support the screening and evaluation of candidate applications and interviews. These tools help streamline the initial assessment, but all decisions about candidate advancement are made by human recruiters and hiring managers. While technology supports early steps, every interview will be handled by experienced recruiters and hiring managers to provide a personal touch.

Clean Harbors in La Porte, TX is seeking an Environmental Field Chemist CDL (CleanPack Chemist) to handle, segregate, pack, and inspect chemical waste in accordance with Federal/State/Local regulations and our company policies and procedures. This position will work both indoors and outdoors at plants, labs, customer sites and are responsible for assisting with lab packs within customer facilities, household hazardous waste (HHW) collections and lab moves. This is a customer facing position, working at customer sites daily. The Environmental Field Chemist are (NOT) laboratory-based Chemist. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors? • Health and Safety is our #1 priority and we live it 3-6-5!, • Focus on maintaining sustainability and cleaning the Earth, • Recruiting Pay range, • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match, • Own part of the company with our Employee Stock Purchase Plan, • Opportunities for growth and development for all the stages of your career, • Company paid training and tuition reimbursement RESPONSIBILITIES Key Responsibilities: • Ensure that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner, • Prepare computer generated packing lists, labels, manifest, and land disposal restriction notifications, • Perform inspections of staging, accumulating and storage areas to ensure proper housekeeping procedures and compliance, • Inspect storage area and drums for leaks or spills, • Inspect drums for compliance with labeling regulations, • Collects, segregates, and properly packages waste chemicals for disposal to maximize efficiency and maintain compliance, • Executes Jobs at Clean Harbors customer locations including fortune 500 companies, • Responsible for final preparation and approval of all projects before shipment in accordance with OSHA, EPA, DOT and company policies, • Conducts projects/jobs according to site specific Federal, State, and local regulations and health and safety plans, • Understand customer specific disposal restrictions/special packaging requirements, • Sample and profile of new waste streams or any waste needing analytical testing, • Ensures drum count is correct and that drum conditions are shippable in accordance our company’s policies and procedure, • Follow all local, state (provincial) and federal compliance regulations and rules, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements, • Safely observe all corporate operating guidelines and procedures, • Observe all company environmental health and safety operating guidelines, • Perform other duties as assigned QUALIFICATIONS Required Qualifications: • Valid Driver’s license, • Strong customer service skills, • By position, obtain a CDL Class B with hazmat and tanker endorsement within 6 months of employment, • Perform physical functions per job requirements, • Successfully complete a background check, drug test, and physical, by position, • Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications:, • College degree in Chemistry or Natural Science, • Previous experience in Environmental Services (i.e. remediation, abatement, emergency spill response, etc.) Our Environmental Field Chemist is an entry level position into an exciting and rewarding career at Clean Harbors. Transitioning Military, this is a great opportunity to leverage your skills, experience, and training as you return to civilian life. This position is an entry level management position. From this role, there are approximately 15 other roles one can be promoted into within Clean Harbors. A significant number of our middle and senior management staff all started in this role, from less than 5 years ago to 30 plus years ago. Many others who have started in this role have significant positions within our customers as Environmental Health and Safety staff members at significant universities, pharmaceutical manufacturers as well as other customers. We will accelerate your training, so you learn the skills and knowledge to succeed in this position and start your career. You can work in any of our 200+ branch locations and can transfer internally. After successfully learning this position in approximately 18 to 36 months, then you will have the opportunity to move into a Salary Management position. Clean Harbors Technical Services • Waste Disposal – Comprehensive disposal of hazardous and non-hazardous waste at Company-owned facilities, • Recycling Services – Extensive recycling, reuse and reclamation options for materials such as solvents, chemicals, oil and electrical equipment, • Chemical Packing – Safe, efficient handling and disposal of the widest range of chemicals, including reactives and compressed gases, • Household Hazardous Waste (HHW) Services – HHW collection programs of all types and sizes, facilitated by Clean Harbors expert personnel Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact _ or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. #CH

Welcome to Waste Resource Management (WRM) At Waste Resource Management (WRM), we go beyond operating trucks -we are dedicated to environmental protection and delivering exceptional service. With a presence across Texas, Colorado, Florida, and Nevada, our affiliated companies-SouthWaste Disposal LLC, Silver City Processing, and McDonald Farms, Inc.-offer comprehensive solutions for liquid waste recycling and transportation. Join a Company That Values You At WRM and affiliated companies, your work matters-for the environment, our clients, and your career. If you're ready to drive for a company that pays well, offers a competitive benefits package, operates safely, and supports your growth, we want to hear from you. Job Overview As a local vacuum truck driver and operator, you will be responsible for the safe, efficient, and legally compliant servicing of our customers. Your role will involve conducting pre-post trip inspections on your truck, following all safety rules and regulations, and loading/unloading liquid waste from customer locations to a wastewater treatment facility. You must be someone who enjoys an active job, is comfortable using equipment on the truck to load/unload liquid waste, enjoys working independently but also thrives in building strong relationships. If you have a CDL license with a good driving and safety record, and enjoy a challenge and the work/life balance that we provide, apply today. Why join WRM and affiliated companies? • Competitive Starting Pay: Minimum of $28.00 per hour, depending on previous vacuum and/or tanker driver experience and market, overtime pay after 40 hours, weekly pay. Annual performance review process and pay increases based on individual and company performance., • Comprehensive Benefits: Choose from one of three medical plans, based on your needs, dental, and vision coverage; along with 401(k) with 5% company match, • Career Growth: Training programs and advancement opportunities in wastewater operations and environmental services, • Paid Time Off: Generous PTO policy accrues from day 1, floating and company paid holidays., • Additional Perks: Company-paid life and disability insurance, employee assistance program, monthly cell phone stipend and more, • Safety-First Fleet: We operate operationally sound equipment designed to protect our professional drivers and loyal customers, • Supportive Leadership: Leadership that values safety, professionalism and growth What You'll Do, • Safely operate vacuum trucks and related equipment, • Collect and transport both liquid and solid waste, including industrial by-products and sewage, • Conduct daily inspections and perform routine maintenance on vehicles, • Ensure waste is disposed of properly and in compliance with all local, state, and federal regulations, • Maintain professional conduct working with customers, fellow peers and the motoring public, • Maintain accurate records of waste collected, maintain driver electronic logs, and necessary documentation as required, • Other duties as assigned, • *May require occasional overtime, weekends or holiday shifts as dictated by business needs What we're looking for, • Valid Class-A Driver's License (CDL) with Tanker Endorsement (preferably in state of operation), • High school diploma or GED and at least 1 year of Class A tanker driving experience, • Willingness and ability to work overnight shifts, • Clean driving record (no more than 2 moving violations in 3 years, 1 at-fault accident in 5 years), • Ability to pass a background check and drug screening, • Must physically qualify and obtain a Medical Examiners Certificate, • Physical capability to lift 50+ pounds, bend, squat, and work in various weather conditions, • Strong communication and customer service skills, • Vaccum truck experience is preferred Equal Opportunity Employer WRM is dedicated to fostering a diverse and inclusive workplace. We offer equal employment opportunities regardless of race, religion, gender, age, sexual orientation, veteran status, or disability.

Front-End Drivers operate front-end trucks that provide services to a variety of multi-family residential and commercial routes removing and transporting waste or recyclables in fulfillment of customer contracts. This position will service multiple customers per day according to assigned routes. The waste will then need to be transferred to the appropriate station, landfill or drop-off location. Key Responsibilities: • Drive commercial frontload or ancillary equipment along designated routes to mechanically collect solid waste and take to post-collection facilities, • Open container enclosures or gates to access cans. As needed, roll 3-4-yard cans on castors into position for dumping, • Perform daily pre- and post-trip inspections; complete and submit a vehicle condition report at the end of the shift, • Courteously interacts with customers and/or the general public along the route to answer questions or respond to requests; Notify supervisor of issues requiring management action, • Clean loose trash off of truck and/or ground around truck and container that spills during dumping process to maintain clean customer site and safety along roads and highways, • Maintains and submits a logbook, daily route/productivity sheet, and vehicle condition report (post-trip inspection sheet) as required by law or company policy, • Maneuver truck into and out of minimum clearance spaces, using mirrors to back up, • Uses a key map and GPS to locate service addresses, • Follows safe operating practices, including lock out/ tag out procedures to ensure proper operation of the truck, • Monitors operations to detect loose debris, using mirrors or direct sight and/or listening for debris falling onto truck during dumping operation; visually scans customer site before and after dumping, • Follow all safety standards, equipment checks and precautions in performance of all duties. Comply with all federal, state/provincial, local and company rules on safety and vehicle operation., • Performs other job-related duties as assigned Requirements: • Possess a valid Commercial Driver’s License (CDL)., • Minimum of one (1) year commercial truck driving experience OR CDL school certificate, • Must be able to meet relevant criteria for safety sensitive functions according to Company standards, • Must be able to demonstrate the ability to safely drive the truck and operate the equipment Knowledge, Skills & Abilities: • Knowledge of the truck and its components and the basic maintenance Requirements: for safe operation, • Ability to control operations of equipment; maneuvering truck into and out of minimum clearance spaces, using mirrors to back distances of approximately 120 feet or more, • Ability to recognize unacceptable waste (such as gasoline or other flammable materials), • Ability to communicate effectively with internal and external customers, • Ability to read, write, and comprehend associated documents and maps, • Ability to understand and follow oral and written instructions, • Flexibility to accept and adapt to change as well as the commitment to seek continuous improvement, • Ability to exert muscle force to lift, push, pull or carry objects up to 50 pounds repetitively using proper lifting techniques, • Ability to coordinate two or more limbs (for example: two arms, two legs, or one leg and one arm) while sitting or standing, • Ability to follow all company safety policies and procedures Physical/Mental Demands: • Ability to stand, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, and smell., • Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus due to the constant maneuvering of vehicle in tight and high traffic areas., • Ability to regularly lift/move up to 25 pounds, frequently lift/move up to 50 pounds and occasionally lift/move up to 100 pounds. Occasionally move/push up to 300 pounds., • Ability to enter and exit truck to open doors to corrals multiple times during a shift, • Ability to climb to top of truck to verify that the load is secured prior to transporting the load to the landfill, • Sitting is required 75% of the time due to the primary function of driving., • Ability to work in usually loud conditions. Working Conditions: • Frequently exposed to loud noise, humidity, rainy/stormy, extreme hot and cold weather conditions (depending on season), moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles, • Work in outdoor environment up to 100% of the time., • Works route away from branch location on a continuous basis throughout the day., • Occasionally work in high precarious places., • Work in motor vehicle traffic conditions constantly., • Work environment is usually loud. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact _ Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date. This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

The Residential Driver will be responsible for safely, efficiently, and courteously providing waste removal services to customers. The driver will collect solid waste or recyclables on curbside and/or backdoor routes and transporting to post-collection facilities. At GFL our goal is to invest in our people and provide opportunities to grow for life! Our employees are affectionately known as team green, a name that unites us all under our shared purpose of providing sustainable solutions to enable our customers and communities to be GREEN FOR LIFE! 15 days of paid time off. 4 medical plan options including an HSA with employer contribution & match program, dental, and vision coverage. 401(k) with an employer match. Paid holidays. Employee Assistance Program with free counseling services. Overview: GFL Environmental is one of North America’s leading waste management companies, proudly making communities cleaner, safer, and happier through first-class service. Working for GFL is more than a job — it’s an opportunity to grow in your career, make new friends, and make a difference each day. Key Responsibilities: Drives a rear-load, split body, curotto, or automated-side load truck along designated routes to collect waste and take to post-collection facilities. As route conditions require, driver will assist helper(s) in loading solid waste into truck hopper. Utilize helpers while backing up according to Company policy. Ensures company employees and third-party helpers adhere to Company policies, procedures, safety compliance and quality standards, while on designated route. Operates mechanical packer to load and compact trash from hopper into the truck body. Perform daily pre- and post-trip inspections; complete and submit a vehicle condition report at the end of the shift. Courteously interacts with customers and/or the general public along the route to answer questions or respond to requests; Notify supervisor of issues requiring management action. Clean loose trash off truck and/or ground around truck and container that spills during dumping process to maintain clean customer site and safety along roads and highways. Maintains and submits a DOT logbook, daily route/productivity sheet, and vehicle condition report (post-trip inspection sheet) as required by law or company policy. Maneuver truck into and out of minimum clearance spaces, using mirrors to back up. Uses a key map and GPS to locate service addresses. Follows safe operating practices, including lock out/ tag out procedures to ensure proper operation of the truck. Monitors operations to detect loose debris, using mirrors or direct sight and/or listening for debris falling onto truck during dumping operation; visually scans customer site before and after dumping. Adherence to all DOT, OSHA, FMCSA, and EPA regulations and standards. Performs other job-related duties as assigned. Requirements: High school diploma or general education degree (GED) desired, but not required. Possess valid Commercial Driver’s License (CDL). Must be at least 21 years of age. Minimum one (1) years of commercial driving experience OR CDL school certificate. Must be able to meet relevant criteria for safety sensitive functions according to Company standards. Must be able to demonstrate the ability to safely drive the truck and operate the equipment. Knowledge, Skills, and Abilities: Knowledge of the truck and its components, and the basic maintenance required for safe operation. Ability to control operations of equipment; maneuvering truck into and out of minimum clearance spaces, using mirrors to back distances of approximately 120 feet or more. Ability to recognize unacceptable waste (such as gasoline or other flammable materials). Ability to communicate effectively with internal and external customers. Ability to read, write, and comprehend associated documents and maps. Ability to understand and follow oral and written instructions. Ability to follow all company safety policies and procedures. Physical/Mental Demands: Ability to stand, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, and smell. Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus due to the constant maneuvering of vehicle in tight and high traffic areas. Ability to regularly lift/move up to 10 pounds, frequently lift/move up to 25 pounds, and occasionally lift/move up to 100 pounds. Sitting may be required up to 75% of the time due to the primary function of driving. Ability to work in usually loud conditions. Working Conditions: Frequently exposed to loud noise, humidity, rainy/stormy, extreme hot and cold weather conditions (depending on season), moving mechanical parts, vibration, toxic and caustic chemicals, fumes, and airborne particles. Work in outdoor environment up to 100% of the time. Works route away from branch location on a continuous basis throughout the day. Occasionally work in high precarious places. Work in motor vehicle traffic conditions constantly. Work environment is usually loud. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact _ Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date. This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

The Commercial Frontload Driver will be responsible for safely, efficiently, and courteously providing waste removal services to customers. The driver will collect solid waste or recyclables on commercial and/or residential routes and transporting to post-collection facilities. At GFL our goal is to invest in our people and provide opportunities to grow for life! Our employees are affectionately known as team green, a name that unites us all under our shared purpose of providing sustainable solutions to enable our customers and communities to be GREEN FOR LIFE! 15 days of paid time off. 4 medical plan options including an HSA with employer contribution & match program, dental, and vision coverage. 401(k) with an employer match. Paid holidays. Employee Assistance Program with free counseling services. Overview: GFL Environmental is one of North America’s leading waste management companies, proudly making communities cleaner, safer, and happier through first-class service. Working for GFL is more than a job — it’s an opportunity to grow in your career, make new friends, and make a difference each day. Key Responsibilities: Drive commercial frontload or ancillary equipment along designated routes to mechanically collect solid waste and take to post-collection facilities. Open container enclosures or gates to access cans. As needed, roll 3-4-yard cans on castors into position for dumping. Perform daily pre- and post-trip inspections; complete and submit a vehicle condition report at the end of the shift. Courteously interacts with customers and/or the general public along the route to answer questions or respond to requests; Notify supervisor of issues requiring management action. Clean loose trash off of truck and/or ground around truck and container that spills during dumping process to maintain clean customer site and safety along roads and highways. Maintains and submits a DOT logbook, daily route/productivity sheet, and vehicle condition report (post-trip inspection sheet) as required by law or company policy. Maneuver truck into and out of minimum clearance spaces, using mirrors to back up. Uses a key map and GPS to locate service addresses. Follows safe operating practices, including lock out/ tag out procedures to ensure proper operation of the truck. Monitors operations to detect loose debris, using mirrors or direct sight and/or listening for debris falling onto truck during dumping operation; visually scans customer site before and after dumping. Adherence to all DOT, OSHA, FMCSA, and EPA regulations and standards. Performs other job-related duties as assigned. Requirements: High school diploma or general education degree (GED) desired, but not required. Possess valid Commercial Driver’s License (CDL). Must be at least 21 years of age. Minimum one (1) years of commercial driving experience OR CDL school certificate. Must be able to meet relevant criteria for safety sensitive functions according to Company standards. Must be able to demonstrate the ability to safely drive the truck and operate the equipment. Knowledge, Skills, and Abilities: Knowledge of the truck and its components, and the basic maintenance required for safe operation. Ability to control operations of equipment; maneuvering truck into and out of minimum clearance spaces, using mirrors to back distances of approximately 120 feet or more. Ability to recognize unacceptable waste (such as gasoline or other flammable materials). Ability to communicate effectively with internal and external customers. Ability to read, write, and comprehend associated documents and maps. Ability to understand and follow oral and written instructions. Ability to follow all company safety policies and procedures. Physical/Mental Demands: Ability to stand, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, and smell. Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus due to the constant maneuvering of vehicle in tight and high traffic areas. Ability to regularly lift/move up to 10 pounds, frequently lift/move up to 25 pounds, and occasionally lift/move up to 100 pounds. Sitting may be required up to 75% of the time due to the primary function of driving. Ability to work in usually loud conditions. Working Conditions: Frequently exposed to loud noise, humidity, rainy/stormy, extreme hot and cold weather conditions (depending on season), moving mechanical parts, vibration, toxic and caustic chemicals, fumes, and airborne particles. Work in outdoor environment up to 100% of the time. Works route away from branch location on a continuous basis throughout the day. Occasionally work in high precarious places. Work in motor vehicle traffic conditions constantly. Work environment is usually loud. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact _ Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date. This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

The Residential Driver will be responsible for safely, efficiently, and courteously providing waste removal services to customers. The driver will collect solid waste or recyclables on curbside and/or backdoor routes and transporting to post-collection facilities. Key Responsibilities: • Operate a residential / recycling collection, side-load and/or rear-load truck, ancillary equipment and hydraulic system to collect solid waste and/or recyclables on specified collection route., • Load solid waste, yard waste and/or recyclables into the rear or side of waste collection vehicle., • Operate equipment on truck to compact trash into vehicle., • Operate truck and equipment using prescribed techniques to eliminate driver-induced mechanical failures., • Complete pre-trip and post-trip safety lane inspections and reports, daily truck report, route sheets and other documentation requested by supervisor daily., • Communicate vehicle mechanical problems to mechanic and supervisor immediately., • Maintain route quality standards as predetermined by management., • Follow all safety standards and equipment checks and precautions in performance of all duties. Comply with all federal, state/provincial, local and company rules on safety and vehicle operation., • Maintain clean vehicle by cleaning cab interior and exterior of vehicle., • Identify, and tag prohibited waste items and remove the items from the waste cart or can., • Manage assigned Helper(s) if applicable., • Conform in all respects with applicable federal, state/provincial and local laws, regulations, ordinances and other orders and to all company policies, procedures and directives from supervisors., • Ensure that all required personal protective equipment be worn at all times (i.e., gloves, reflective vest, safety glasses, work boots, etc.), • Report all accidents or incidents to supervisor(s) immediately, • Exhibit a professional demeanor, manner and appearance at all times (i.e., meeting customers and/or the general public while on route or in uniform.), • Maintain accurate records of services performed., • Maintain inventory of all container and residential carts and spare parts available and recommend purchase of additional containers, carts and spare parts to supervisor., • Work closely with supervisor to improve routing efficiencies., • May be required to work overtime, • Attend safety and branch meetings., • Perform other duties and responsibilities as required or requested by management. Requirements: • High school diploma or general education degree (GED) desired., • Must possess a Commerical Driver's License, • Minimum one (1) years of commercial driving experience OR CDL school certificate, • Must be able to meet relevant criteria for safety sensitive functions according to Company standards, • Must be able to demonstrate the ability to safely drive the truck and operate the equipment Knowledge, Skills and Abilities: • Knowledge of the truck and its components and the basic maintenance Requirements: for safe operation, • Ability to control operations of equipment; maneuvering truck into and out of minimum clearance spaces, using mirrors to back distances of approximately 120 feet or more, • Ability to recognize unacceptable waste (such as gasoline or other flammable materials), • Ability to communicate effectively with internal and external customers, • Ability to read, write, and comprehend associated documents and maps, • Ability to understand and follow oral and written instructions, • Flexibility to accept and adapt to change as well as the commitment to seek continuous improvement, • Ability to exert muscle force to lift, push, pull or carry objects up to 50 pounds repetitively using proper lifting techniques, • Ability to coordinate two or more limbs (for example: two arms, two legs, or one leg and one arm) while sitting or standing, • Ability to follow all company safety policies and procedures Physical/Mental Demands: • Ability to stand, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, and smell., • Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus due to the constant maneuvering of vehicle in tight and high traffic areas., • Ability to regularly lift/move up to 10 pounds, frequently lift/move up to 25 pounds, and occasionally lift/move up to 100 pounds., • Sitting may be required up to 75% of the time due to the primary function of driving., • Ability to work in usually loud conditions. Working Conditions: • Frequently exposed to loud noise, humidity, rainy/stormy, extreme hot and cold weather conditions (depending on season), moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles, • Work in outdoor environment up to 100% of the time., • Works route away from branch location on a continuous basis throughout the day., • Occasionally work in high precarious places., • Work in motor vehicle traffic conditions constantly., • Work environment is usually loud. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact _ Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date. This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

The Residential Driver will be responsible for safely, efficiently, and courteously providing waste removal services to customers. The driver will collect solid waste or recyclables on curbside and/or backdoor routes and transporting to post-collection facilities. Key Responsibilities: • Operate a fully automated side loading truck, ancillary equipment and hydraulic system while driving alone on public roadway to collect solid waste on specified collection route., • Complete pre-trip and post-trip inspections and reports, daily truck report, route sheets and other documentation requested by supervisor daily., • Communicate vehicle mechanical problems to mechanic and supervisor immediately., • Maintain route quality standards as predetermined by management., • Follow all safety and equipment checks and precautions in performance of all duties. Comply with all federal, state/provincial, local and company rules on safety and vehicle operation., • Maintain clean vehicle by cleaning cab interior and exterior of vehicle., • Comply with all information requests from superiors in order to ensure compliance with work rules and company policy., • Conform in all respects with applicable federal, state/provincial and local laws, regulations, ordinances and other orders and to all company policies, procedures and directives from supervisors., • Maintain accurate records of services performed., • Work independently with minimal in field supervision., • Work closely with supervisor to improve routing efficiencies., • May be required to work overtime., • Attend safety and branch meetings., • Perform other duties and responsibilities as required or requested by management. Requirements: • High school diploma or general education degree (GED) desired., • Possess valid Commercial Driver’s License (CDL)., • Minimum two (2) years of commercial driving experience OR CDL school certificate, • Must be able to meet relevant criteria for safety sensitive functions according to Company standards, • Must be able to demonstrate the ability to safely drive the truck and operate the equipment Knowledge, Skills and Abilities: • Knowledge of the truck and its components and the basic maintenance Requirements: for safe operation, • Ability to control operations of equipment; maneuvering truck into and out of minimum clearance spaces, using mirrors to back distances of approximately 120 feet or more, • Ability to recognize unacceptable waste (such as gasoline or other flammable materials), • Ability to communicate effectively with internal and external customers, • Ability to read, write, and comprehend associated documents and maps, • Ability to understand and follow oral and written instructions, • Flexibility to accept and adapt to change as well as the commitment to seek continuous improvement, • Ability to exert muscle force to lift, push, pull or carry objects up to 50 pounds repetitively using proper lifting techniques, • Ability to coordinate two or more limbs (for example: two arms, two legs, or one leg and one arm) while sitting or standing, • Ability to follow all company safety policies and procedures Physical/Mental Demands: • Ability to stand, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, taste, and smell., • Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus due to the constant maneuvering of vehicle in tight and high traffic areas., • Ability to operate all controls from inside the vehicle., • Ability to regularly lift/move up to 10 pounds, frequently lift/move up to 25 pounds, and occasionally lift/move up to 100 pounds., • Sitting is required 75% of the time due to the primary function of driving., • Ability to work in usually loud conditions. Working Conditions: • Frequently exposed to loud noise, humidity, hot and cold weather conditions, moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles., • Occasionally work in high precarious places., • Work in motor vehicle traffic conditions constantly., • Work environment is usually loud. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact _ Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date. This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

The Roll-Off Driver will be responsible for safely, efficiently, and courteously providing waste removal services to customers across multiple lines of businesses. The CDL Driver will collect waste from customer sites and transport to post-collection facilities for proper disposal. Key Responsibilities: • Operate roll-off truck and ancillary equipment to collect waste., • Complete pre-trip and post-trip safety lane inspections and reports, daily truck report, route sheets and other documentation requested by supervisor daily., • Communicate vehicle mechanical problems to mechanic and supervisor immediately., • Maintain route quality standards as predetermined by management., • Operate truck and equipment using prescribed techniques to eliminate driver-induced mechanical failures., • Follow all safety standards, equipment checks and precautions in performance of all duties. Comply with all federal, state/provincial, local and company rules on safety and vehicle operation including any required customer specific rules or regulations., • Communicate any potential hazards in serving/picking up container to Supervisor/Lead prior to performing task, • Maintain clean vehicle by cleaning cab interior and exterior of vehicle., • Report all accidents or incidents to supervisor(s) immediately, • Exhibit a professional demeanor, manner and appearance at all times (i.e., meeting customers and/or the general public while on route or in uniform.), • Ensure that all required personal protective equipment be worn at all times (i.e., gloves, reflective vest, safety glasses, work boots, etc.), • Maintain accurate records of services performed., • Work closely with supervisor to improve routing efficiencies., • Attend safety and branch meetings., • May be required to work overtime, • Perform other duties and responsibilities as required or requested by management. Requirements: • High school diploma or general education degree (GED) desired., • Possess valid Commercial Driver’s License (CDL)., • Minimum one (1) years of commercial driving experience OR CDL school certificate, • Must be able to meet relevant criteria for safety sensitive functions according to Company standards, • Must be able to demonstrate the ability to safely drive the truck and operate the equipment Knowledge, Skills and Abilities: • Ability to operate any vehicle or equipment necessary to perform job., • Ability to communicate in writing and verbally with others., • Ability to perform basic mathematical calculations and apply to job., • Ability to write simple reports and correspondence such as pre- and post-trip inspections, accident reports, daily paperwork, etc., • Ability to read and comprehend simple correspondence and instructions such as company policies and procedures, etc., • Ability to apply common sense reasoning to carry out uninvolved written and/or oral instructions and to solve general problems., • Ability to follow instructions and work under limited supervision. Physical/Mental Demands: • Must be able to sit, stand, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, and smell., • Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus due to the constant maneuvering of vehicle in tight and high traffic areas., • Ability to regularly lift/move up to 10 pounds, frequently lift/move up to 25 pounds and occasionally lift/move up to 100 pounds., • Sitting is required up to 75% of the time due to the primary function of driving., • Ability to work in usually loud conditions. Working Conditions: • Frequently exposed to loud noise, humidity, rainy/stormy, extreme hot and cold weather conditions (depending on season), moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles, • Work in outdoor environment up to 100% of the time., • Works route away from branch location on a continuous basis throughout the day., • Occasionally work in high precarious places., • Work in motor vehicle traffic conditions constantly., • Work environment is usually loud. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact _ Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date. This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

Ready for a role that supports your unique calling in patient care and fits your life? At HCA Houston Healthcare West, you’ll find clear pathways to advance backed by our unmatched nationwide transfer policy that lets you grow your career when the time is right for you. With mentorship opportunities, clinical education courses, professional certification support, and educational assistance, you will have all the resources you need to build the career of a lifetime. Job Summary and Qualifications We are seeking a Registered Nurse Infection Prevention Coordinator for our facility to ensure that we continue to provide all patients with high quality, efficient care. We are an amazing team that works hard to support each other, and we are seeking a phenomenal addition like you who feels patient care is as meaningful as we do. We want you to apply now! What you will do in this role: • You are responsible for identifying health and safety risk factors associated with a hospital environment which may impact illnesses or injuries associated with patients and/or healthcare workers., • You will assist with administering Environmental Health Programs in collaboration with all departments, Management Leadership, and designated hospital committees., • You will demonstrate strong knowledge set in regard to infection prevention and will be a point of contact resource for patients and/or family members, employees, and physicians., • You will coordinate appropriate follow-up and reporting of communicable diseases, patterns of illnesses, and injuries for both the healthcare worker and the patient as assigned by the Environmental Health Manager., • You will collaborate with physicians, nurses, and other clinical disciplines in making decisions regarding patient care. What qualification you will need: • Bachelor’s Degree in a healthcare related field is required., • If a nurse, Current Registered Nurse License in the State of Texas or Multi-State Compact License (Employees with RN Compact License are required to obtain Texas RN License within 90 days of hire date), • Preferred Board Certification in Infection Control or degree in Public Health, • One year recent clinical experience, • Excellent computer skills, including Microsoft Excel, PowerPoint, Word and OfficeBenefits HCA Houston Healthcare West, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services, • Wellbeing support, including free counseling and referral services, • Time away from work programs for paid time off, paid family leave, long- and short-term disability coverage and leaves of absence, • Savings and retirement resources, including a 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), Employee Stock Purchase Plan, flexible spending accounts, preferred banking partnerships, retirement readiness tools, rollover support and financial wellbeing counseling, • Education support through tuition assistance, student loan assistance, certification support, dependent scholarships and a partnership with Galen College of Nursing, • Additional benefits for fertility and family building, adoption assistance, life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection and consumer discounts _ Note: Eligibility for benefits may vary by location. _ is a full-service, 300+ bed hospital that has been offering exceptional care to the West Houston communities for over 30 years. We proudly provide Houston residents with exceptional healthcare, including a vast-array of medical services from board-certified doctors and nationally accredited departments. We are recognized as a Certified Primary Stroke Center by the Joint Commission and under an affiliation agreement with The Woman’s Hospital of Texas, we are able to bring our community The Woman’s Hospital of Texas at West Houston, a three-story cardiac and critical care tower. The Sugar Land Cancer Center and the Sugar Land Diagnostic Center, departments with HCA Houston Healthcare West, provide additional services to meet the needs of our community. We are members of HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. Together we are stronger, smarter and more accessible in providing the patient-centered care you need close to home. HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "Nurses are essential to the delivery of healthcare and serve as its foundation. At HCA Healthcare, we are committed to equipping nurses with the tools and resources they need to deliver exceptional patient care, championing the profession, and supporting the advancement of nursing’s future." Erica Rossitto, MBA/HCM, BSN, RN, NEA-BC Senior Vice President and Chief Nurse Executive HCA Healthcare Join a family that cares about every stage in your career! We are interviewing candidates for our Registered Nurse Infection Control Coordinator opening. Apply today and a member of our Talent Acquisition team will reach out. We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

HPC-Industrial, powered by Clean Harbors, in Deer Park, TX is looking for a Class A Driver / OTR Equipment Hauler (must drive manual transmission) to join their safety conscious team! 70% OTR driving, 30% local driving. TWIC card preferred or must be able to obtain. Flat bed experience a preferred! This team member is responsible for the safe and successful execution of jobs across all service lines and various other responsibilities. This position supports the local equipment hub in moving equipment to and from regional job sites. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. WORK LOCATION: Deer Park, TX PLEASE READ ALL KEY RESPONSIBILITIES/PHYSICAL DEMANDS - YOU MAY BE A GREAT FIT!!!! *MUST BE ABLE To Drive Manual Transmission vehicles. 30% driving / working locally, 70% OTR driving Forklift operations experience a plus! TWIC card is required! Duties include driving a flatbed, hauling heavy equipment OTR and locally. Experience driving in all types of weather relative to geographic location. • A respirator may need to be worn on certain sites and will be provided., • Forklift experience a plus!, • TWIC card is required., • Class A, no restrictions, must be able to drive manual transmission. Why work for HPC-Industrial? • Health and Safety is our #1priority and we live it 3-6-5!, • Competitive wages $30 - $35 hourly DOE, • Comprehensive health benefits coverage after 30 days of full-time employment, • Group 401K with company matching component., • Opportunities for growth and development for all the stages of your career, • Generous paid time off, company paid training and tuition reimbursement., • Positive and safe work environments RESPONSIBILITIES Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Perform routine maintenance on company equipment being used on the job. Transport equipment to and from customer locations. Completes pre and post trip inspections, driver’s logs and complies with all other vehicle policy and DOT requirements. Loading and unloading equipment. Perform other related duties as assigned. QUALIFICATIONS What does it take to work for HPC-Industrial? • Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs., • Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations., • Valid CDL Class A license, no restrictions. Must drive Manual transmission vehicles., • Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers., • Experience driving a flatbed truck, hauling equipment., • TWIC card preferred or must be able to obtain., • Availability to travel for extended periods of time. About HPC-Industrial: HPC-Industrial, powered by Clean Harbors, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. _Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. To learn more about our company, and to apply online for this exciting opportunity, visit us at . Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact _ or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. #HPC

The Recovery Technician will be responsible for operating a straight truck while collecting used oil, filters and plastics throughout the designated province. This individual will require a high level of professionalism and customer service, which will be used to consistently build positive customer relationships and to promote GFL’s wide range of service offerings. At GFL our goal is to invest in our people and provide opportunities to grow for life! Our employees are affectionately known as team green, a name that unites us all under our shared purpose of providing sustainable solutions to enable our customers and communities to be GREEN FOR LIFE! • 15 days of paid time off., • 4 medical plan options including an HSA with employer contribution & match program, dental, and vision coverage., • 401(k) with an employer match., • Paid holidays., • Employee Assistance Program with free counseling services. Overview: GFL Environmental is one of North America’s leading waste management companies, proudly making communities cleaner, safer, and happier through first-class service. Working for GFL is more than a job — it’s an opportunity to grow in your career, make new friends, and make a difference each day. Key Responsibilities: • Follow schedules and service orders in accordance with the Service Coordinator’s instructions., • Provide exceptional on-site service to customers and continuously promotes GFL’s service offerings., • Complete service paperwork in accordance with GFL and TDG regulations., • Ensure regular cleaning and maintenance of truck cab, components and other assigned equipment., • Participate in GFL’s safety programs including: safety meetings, last minute risk assessments, and job hazard assessments. Knowledge, Skills, and Abilities: • CDL A with hazmat and tanker endorsement, • 3+ years CDL experience, • Roll off specific experience, • Customer service experience., • Self-motivated attitude., • Experience working in a safety sensitive environment. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact _ Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date. This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

The Executive Chef is a management position overseeing chef managers as well as hourly culinary staff, responsible for developing and executing culinary solutions to meet customer needs and tastes. Offers a wide variety of culinary solutions to meet customer and client needs and tastes. Oversees and manages culinary operations to meet production, presentation, and service standards. Applies culinary techniques to food preparation and manages the final presentation and service of food. • Ensures culinary production appropriately connects to the Executional Framework, • Ensures proper culinary standards and techniques are in place for preparation of food items, including production, presentation, and service standards, • Manages a culinary team, including chef managers and hourly staff, to ensure quality in final presentation of food, • Train and manage culinary and kitchen employees to use best practice food production techniques, • Coach employees by creating a shared understanding about what needs to be achieved and how it is to be achieved, • Reward and recognize employees, • Plan and execute team meetings and daily huddles, • Complete and maintain all staff records including training records, shift opening/closing checklists and performance data, • Develop and maintain effective client and guest rapport for mutually beneficial business relationships, • Interact directly with guests daily, • Aggregate and communicate regional culinary and ingredient trends, • Responsible for delivering food and labor targets, • Consistent focus on margin improvement; understanding performance metrics, data, order, and inventory trends, • Ensure efficient execution and delivery of all culinary products in line with the daily menu, • Maintain integrity of the standard Aramark food offer; responsible for always maintaining food quality and safety of items, • Full compliance with Operational Excellence fundamentals: managing waste, standard menus, recipes and ingredients through managing customer driven menus and labor standards, • Understand end to end supply chain and procurement process and systems, ensuring only authorized suppliers are used, • Full knowledge and implementation of the Food Framework, • Ensure accuracy of estimated food consumption for appropriate requisitions and/or food purchase, • Ensure proper equipment operation and maintenance, • Ensure compliance with Aramark SAFE food and Quality Assurance standards, occupational and environmental safety policies in all culinary and kitchen operations, • Comply with all applicable policies, rules and regulations, including but not limited to those relating to safety, health, wage and hour At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice.- Requires at least 4 years of culinary experience At least 2 years in a management role preferred Requires a culinary degree or equivalent experience Ability to multi-task Ability to simplify the agenda for the team Requires advanced knowledge of the principles and practices within the food profession. This includes experiential knowledge required for management of people and/or problems. Requires oral, reading, and written communication skills Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on , and .

The Roll-Off Driver will be responsible for safely, efficiently, and courteously providing waste removal services to customers. The driver will service industrial, residential, or recycle routes to mechanically collect construction debris, solid waste, or recyclables and transport to the post-collection facilities for proper disposal. At GFL our goal is to invest in our people and provide opportunities to grow for life! Our employees are affectionately known as team green, a name that unites us all under our shared purpose of providing sustainable solutions to enable our customers and communities to be GREEN FOR LIFE! 15 days of paid time off. 4 medical plan options including an HSA with employer contribution & match program, dental, and vision coverage. 401(k) with an employer match. Paid holidays. Employee Assistance Program with free counseling services. Overview: GFL Environmental is one of North America’s leading waste management companies, proudly making communities cleaner, safer, and happier through first-class service. Working for GFL is more than a job — it’s an opportunity to grow in your career, make new friends, and make a difference each day. Key Responsibilities: Drives a roll-off truck along designated routes to mechanically collect, exchange, or deliver containers and take to the post-collection facilities. Perform daily pre- and post-trip inspections; complete and submit a vehicle condition report at the end of the shift. Courteously interacts with customers and/or the general public along the route to answer questions or respond to requests; Notify supervisor of issues requiring management action. Clean loose trash off truck and/or ground around truck and container that spills during dumping process to maintain clean customer site and safety along roads and highways. Maintains and submits a DOT logbook, daily route/productivity sheet, and vehicle condition report (post-trip inspection sheet) as required by law or company policy. Maneuver truck into and out of minimum clearance spaces, using mirrors to back up. Uses a key map and GPS to locate service addresses. Follows safe operating practices, including lock out/ tag out procedures to ensure proper operation of the truck. Monitors operations to detect loose debris, using mirrors or direct sight and/or listening for debris falling onto truck during dumping operation; visually scans customer site before and after dumping. Adherence to all DOT, OSHA, FMCSA, and EPA regulations and standards. Performs other job-related duties as assigned. Requirements: High school diploma or general education degree (GED) desired, but not required. Possess valid Commercial Driver’s License (CDL). Must be at least 21 years of age. Minimum one (1) years of commercial driving experience OR CDL school certificate. Must be able to meet relevant criteria for safety sensitive functions according to Company standards. Must be able to demonstrate the ability to safely drive the truck and operate the equipment. Experience operating a standard transmission on a commercial truck (depending on location). Knowledge, Skills, and Abilities: Knowledge of the truck and its components, and the basic maintenance required for safe operation. Ability to control operations of equipment; maneuvering truck into and out of minimum clearance spaces, using mirrors to back distances of approximately 120 feet or more. Ability to recognize unacceptable waste (such as gasoline or other flammable materials). Ability to communicate effectively with internal and external customers. Ability to read, write, and comprehend associated documents and maps. Ability to understand and follow oral and written instructions. Ability to follow all company safety policies and procedures. Physical/Mental Demands: Ability to stand, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, and smell. Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus due to the constant maneuvering of vehicle in tight and high traffic areas. Ability to regularly lift/move up to 10 pounds, frequently lift/move up to 25 pounds, and occasionally lift/move up to 100 pounds. Sitting may be required up to 75% of the time due to the primary function of driving. Ability to work in usually loud conditions. Working Conditions: Frequently exposed to loud noise, humidity, rainy/stormy, extreme hot and cold weather conditions (depending on season), moving mechanical parts, vibration, toxic and caustic chemicals, fumes, and airborne particles. Work in outdoor environment up to 100% of the time. Works route away from branch location on a continuous basis throughout the day. Occasionally work in high precarious places. Work in motor vehicle traffic conditions constantly. Work environment is usually loud. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact _ Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date. This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

HPC-Industrial, powered by Clean Harbors, in Deer Park, TX is looking for a Class A Driver / OTR Equipment Hauler (must drive manual transmission) to join their safety conscious team! 70% OTR driving, 30% local driving. TWIC card preferred or must be able to obtain. Flat bed experience a preferred! This team member is responsible for the safe and successful execution of jobs across all service lines and various other responsibilities. This position supports the local equipment hub in moving equipment to and from regional job sites. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. WORK LOCATION: Deer Park, TX PLEASE READ ALL KEY RESPONSIBILITIES/PHYSICAL DEMANDS - YOU MAY BE A GREAT FIT!!!! *MUST BE ABLE To Drive Manual Transmission vehicles. 30% driving / working locally, 70% OTR driving Forklift operations experience a plus! TWIC card is required! Duties include driving a flatbed, hauling heavy equipment OTR and locally. Experience driving in all types of weather relative to geographic location. • A respirator may need to be worn on certain sites and will be provided., • Forklift experience a plus!, • TWIC card is required., • Class A, no restrictions, must be able to drive manual transmission. Why work for HPC-Industrial? • Health and Safety is our #1priority and we live it 3-6-5!, • Competitive wages $30.00 - $35.00 hourly DOE, • Comprehensive health benefits coverage after 30 days of full-time employment, • Group 401K with company matching component., • Opportunities for growth and development for all the stages of your career, • Generous paid time off, company paid training and tuition reimbursement., • Positive and safe work environments RESPONSIBILITIES Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Perform routine maintenance on company equipment being used on the job. Transport equipment to and from customer locations. Completes pre and post trip inspections, driver’s logs and complies with all other vehicle policy and DOT requirements. Loading and unloading equipment. Perform other related duties as assigned. QUALIFICATIONS What does it take to work for HPC-Industrial? • Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs., • Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations., • Valid CDL Class A license, no restrictions. Must drive Manual transmission vehicles., • Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers., • Experience driving a flatbed truck, hauling equipment., • TWIC card preferred or must be able to obtain., • Availability to travel for extended periods of time. About HPC-Industrial: HPC-Industrial, powered by Clean Harbors, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. _Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. To learn more about our company, and to apply online for this exciting opportunity, visit us at . Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact _ or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. #HPC

Calpine, a business unit of Constellation Energy Corporation (Nasdaq: CEG), is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. With 79 energy facilities in operation, Calpine’s fleet has the capacity to generate approximately 27,000 MW of electricity – enough to power approximately 27 million homes. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (includes but is not limited to the following, other duties may be assigned) Environmental Project Managers at Calpine are responsible for the implementation of complex environmental developmental projects. This position is responsible for environmental permitting and program management related to development projects, including carbon capture, battery storage and others. Responsibility includes but is not limited to: management of air and water permitting activities for developmental projects, including regulatory analysis, emission evaluation, and air dispersion modeling; activities related to compliance with the federal NEPA process; advising Operations, Engineering, Origination, Legal, and other Calpine stakeholders on environmental requirements; evaluation of developmental activities as they pertain to ongoing power plant operations; advising corporate outreach personnel on Environmental Justice and public participation requirements; review of wetland, species, and other site evaluation reports; managing broadly programmatic requirements pertaining to development projects and other relevant plant actions; and other activities as necessary to authorize development of projects. Travel up to 25%. Location may change to another office/plant depending on candidate selected. Job Responsibilities • Maintains in-depth knowledge of environmental regulations, permitting processes, and environmental data collection and evaluation., • Has ability to interpret environmental regulations and permit conditions, and work with agencies to complete permitting actions that allow for needed operational flexibility., • Possesses capability to resolve complex issues and function as an advanced contributor., • Identifies opportunities to develop new processes, tools, services and techniques while driving continuous improvement in systems, programs, and training., • Serves as central resource for various programs; ensures consistency in corporate practices and approach., • Tracks and communicates regulatory changes; ensures compliance with applicable regulations, permits, and plant operational requirements, as they pertain to development projects., • Partners with other functional roles (Plants, Gov/Reg, Legal, Engineering, Origination) to drive a systematic approach to environmental compliance., • Interprets and apply regulations, codes, bylaws, and all relevant standards., • Performs other duties assigned by management that generally fall within the expected scope of this position. Job Requirements • Bachelor’s Degree in Engineering, Environmental Science, Project Management, or Organizational Management or similar field of study; prefer Master’s Degree., • 10 + years of relevant experience., • Substantial knowledge of environment permitting and reporting. Additional Calpine Information: • Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities., • Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to _. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP _ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Calpine, a business unit of Constellation Energy Corporation (Nasdaq: CEG), is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. With 79 energy facilities in operation, Calpine’s fleet has the capacity to generate approximately 27,000 MW of electricity – enough to power approximately 27 million homes. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (including but not limited to the following; other duties may be assigned) Directs overall management of the Battery Energy Storage Systems (BESS) project and is fully responsible for BESS engineering and technology. Lead BESS team efforts to support the construction, operation and maintenance planning, and supporting project development. This position will be involved in day-to-day operations; such as budgets, schedules, and making sure performance standards are set, maintained and achieved. This includes project conceptualization, management of design engineering, development fatal flaw analysis, equipment and vendor selection analysis, vendor and EPC negotiation and management, support construction management, and operations and maintenance planning and analysis. In this role, it is imperative to collaborate with an interdisciplinary team involved in all stages of project development and commercialization. Maintains the efficiency of important aspects of the Battery Energy Storage Systems project management process such as planning, scheduling, and budget and risk assessment. Defines and develops the BESS project management best practices, processes, and policy to ensure alignment with corporate strategy and goals. Partners with multi-departmental leadership and other stakeholders to locate opportunities and develop and prioritize projects according to relevant measurement criteria. Responsible for the supervision of others to ensure that all projects are delivered within the defined scope, quality, time and cost requirements. Job Responsibilities • Development Engineering: o Responsible for leading conceptual designs and layouts for development projects currently in the pipeline as well as new green field developments. o Responsible for leading technical analysis, internal and external, for different feasibility studies and project assessment during the development phase. o Collaborate and give technical support in matters related to the connection to the grid and regulation capabilities of the storage. o Manage the engineering team to ensure compliance with local regulations while optimizing the project design in efficiency and performance. o Responsible for lead the technical and techno-commercial development activities to support Development to assure timely and cost-effective resolution to regulatory, permitting and technical issues associated with the execution and delivery of BESS projects. o Collaborates with the Development team in the preparation and coordination of proposals, proposal materials, and other marketing efforts in support of the market segment. This may include gathering, verifying, and formatting proposal information. • Technology: o Establish and lead the relationships with BESS vendors and coordinate with their technical personnel to stay up to date with technology trends and products specifications o Actively engage in industry standards committees such as NFPA, IEEE, etc. to be on the forefront of industry standards and specifications o Understand the various battery technologies and industry practices to provide guidance to the organization on the application of technology. Educate the procurement, engineering, and operations teams on latest industry technology. o Evaluate available and emerging storage technologies and communicate new technology development and risks associated with the new technology. • Project Tenders: o Lead the development of technical specifications for the procurement, RFI/RFP/RFQ process, of ES systems, subcontractors, and support services. o Responsible for leading the development of key contracting strategies, terms, and implementation of energy storage systems o Responsible for overseeing the team to review technical aspects of OEMs and EPCs proposals pertaining to energy storage during the selection with a tabulation of the received bids in order to ensure the selection of the best offer from the engineering point of view. • Engineering and Standards: o Lead the team to establish and maintain the engineering, design criteria and applicable standards and specifications for BESS projects. o Responsible for the development, review and technical oversight of engineering requirements and design of energy storage projects. o Review/approve the work of consultants used on BESS projects to ensure consistent and cost-effective designs and timely delivery. o Responsible for ensuring the highest level of environmental health and safety in all engineering and design aspects of energy storage projects. o Lead the value-engineering approach when designing energy storage systems in multiple project-specific use cases. • Others: o Provide technical support in evaluating potential M&A efforts for additional ES projects. o Provide support to construction team in relation to ES technology implementation. o Support construction team in developing and enhancing installation and commissioning procedures. o Support the O&M team in developing work procedures and best practices to optimize the operation of the ES systems. o Provide cross-organization training on ES technologies. Job Requirements o 10+ years of experience in the renewable industry o Bachelors Degree Required; Preferred Engineering, Masters or PhD. o Grid connected BESS or any inverter-based generation experience o Working experience in AutoCad and other CAD software to produce conceptual layouts o Knowledge of the National Electric Code, NFPA and UL standards o Proven experience in design and delivery of grid scale bulk energy storage technology solutions. o Proficient knowledge of the full Microsoft Office suite high proficiency in Word, Excel, PowerPoint required o Strong technical, analytical, quantitative, strategic, and management skills o Strong organizational skills and high attention to detail o Strong written and verbal communication, interpersonal, and teamwork skills o Ability to work productively with limited supervision o Strong time-management skills and ability to multi-task o Strong interest in renewable energy and utility business o Business acumen and demonstrated strong project management skills o Ability and willingness to travel Preferred Skills: o Strong understanding of control systems, SCADA, HMI, EMS, and networking protocols o Strong understanding of mechanical systems including HVAC and fire protection systems needed in the ES systems. o Experience performing power systems analysis in software packages such as PSS/E, ETAP or PSCAD is a plus o Knowledge of engineering and market economics and design optimization o Wind and/or Solar system installation or design experience is a plus o Professional Engineer (PE) registration Salary Information o Range - $172,739 to $220,243 / yearly Additional Calpine Information: Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to hrrecruitment@calpine.com. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP _ Education Preferred • Bachelor of Science or better in Engineering - Electrical Licenses & Certifications Preferred • Engineer - Mechanical Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. **Please note that this position can be remote, or in the office in Houston if the candidate prefers. Job Summary (includes but is not limited to the following, other duties may be assigned) Will provide hands-on leadership and direction to the Company Electrical Engineering group. Manage the engineering of MV collection systems, HV substations, and overhead/underground transmission lines (typically 34.5kV up to 500kV), and BESS/Solar plants. Manage external Engineering, Procurement, and Construction (EPC) firms. Coordinate with EPC partners on design constructability reviews, budget adherence, and technical risk mitigation. Approve technical specifications for major capital equipment. Manage third-party engineering vendors and consultants to deliver design packages for BESS projects. Oversee engineering deliverables across Civil, Electrical, Controls, Scada, and Structural disciplines, ensuring alignment with project requirements. Oversee the development of protection and control philosophies, including relay settings, metering, SCADA integration, and telecommunications. Support power delivery engineering for substations, interconnection, and on-site distribution systems tied to BESS operations. Ensure compliance with all relevant codes, standards, and permitting requirements. Work closely with procurement, construction and operations teams to integrate engineering deliverables into overall project schedules. Provide technical input during site selection, land acquisition, and utility planning. Job Responsibilities Oversee engineering design, vendor management, and project delivery for BESS/Solar projects. Decisions typically related to resources, project approach, and tactical operations. Results have significant impact on costs and the achievement of function objectives or project-based goals. Responsible for making decisions for large-scale projects, a closely related set of projects and initiatives involving own and possibly related functional areas. Receives assignments in the form of objectives and determines tactical approach, resources, schedules and goals. Works within general guidelines; applies advanced technical knowledge to solve moderately complex problems for a function. Regularly manages large-scale projects/activities or a very closely related set of projects/activities. Job Requirements Bachelor’s degree in electrical engineering. Previous work leadership or senior level contributor experience. Typically requires minimum of 10+ years in Electrical Power Systems. Salary information Salary range: $154,231.89 - $196,645.66 Additional Calpine Information Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to hrrecruitment@calpine.com. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP _ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.