Trabajos field service engineer en Wichita, KansasCrear alertas

Job Description COME JOIN MID-CONTINENT! “Where your work is valued—above-market pay, real work-life balance, and a team that feels like home.” THE POSITION… As a Software Engineer, you will design avionics, power electronics, and battery systems with an emphasis on AHRS and INS products using the latest advances in sensor technologies. You’ll create unique intellectual property to address the growing demand for software-defined behavior. You can expect a variety of opportunities ranging from products for cockpit displays, instruments and navigational references based on local and remote sensor inputs. Additional products include data conversion and storage, lithium battery management, AC and DC power conversion, and in-seat power solutions. THIS POSITION MAY BE FOR YOU IF… • You have a bachelor’s degree in computer engineering or related field., • You have a minimum of 10 years of experience designing embedded software., • You have a minimum of 5 years of experience as principal designer for AHRS and INS solutions., • You have a minimum of 5 years of experience characterizing and calibrating inertial sensor devices., • You have the ability to work directly with target hardware, including lab bench equipment, other tools for debugging and analysis., • You have proficiency programming in C., • You are proficient with Microsoft Office., • You have strong attention to detail., • You are organized, focused, and results oriented., • You are a problem-solver with critical thinking and prioritizing skills., • You have experience with C#, C++, or Python languages for PC application software., • You have experience with VHDL., • You have experience designing safety-critical software, utilizing RTCA DO-178, DO-254 or similar processes., • You have experience designing or troubleshooting PCB system hardware., • Design and implement embedded C software for bare-metal microcontroller-based systems with an option for VHDL firmware for FPGA-based systems, • Architect and implement ARHS and INS products utilizing MEMS, FOG or other commercially available technologies, • Design tools to support manufacturing, calibration and verification of safety-critical products, • Build and troubleshoot hardware, including basic soldering, operation of test equipment, and daily work in both office and test lab environments, • We provide competitive pay and a comprehensive benefits package., • We promote an environment where you can excel in your career while maintaining a healthy work-life balance., • Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment., • We believe anything worth doing is worth doing right – every time., • We have frequent events to keep work interesting. Our food drive is super impressive, we have an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives and frequent ticket raffles for local sporting and cultural events. Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you’ll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 100000-150000 Yearly Salary PI5465787d7b85-25405-40232776

Job Description Before a road, airfield, or a building can be constructed, all obstacles must be removed from the site. As a Horizontal Construction Engineer in the Army National Guard, you’ll handle the heavy lifting to help your crew succeed. You’ll operate bulldozers, roadgraders, and other massive equipment to clear the way for construction. Your responsibilities will include leveling earth for runways and roadbeds, clearing, excavating, and digging areas of construction sites, spreading fill material, transporting heavy construction equipment with a tractor-trailer, moving heavy building materials with cranes, and assisting in performance of combat engineer missions. Job Duties • Analyze the information on grade stakes and placing them, • Cut and spread fill material with scraper Some of the Skills You’ll Learn • Maintenance and repair of equipment, • Identification of soil types and placement of grade stakes Helpful Skills • Preference for working outdoors Through your training, you will develop the skills and experience to enjoy a civilian career in basic construction methods and engineering principles, particularly as they pertain to operating heavy construction equipment. Plus, you may earn specialized certifications that enable you to step right into a civilian construction career. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for Horizontal Construction Engineers consists of nine weeks of Basic Training, where you'll learn basic Soldiering skills, and nine weeks of Advanced Individual Training. Part of this time is spent in the classroom and part in the field. Benefits/Requirements Benefits • Paid training, • A monthly paycheck, • Montgomery GI Bill, • Federal and State tuition assistance, • Retirement benefits for part-time service, • Low-cost life insurance (up to $400,000 in coverage), • 401(k)-type savings plan, • Student Loan Repayment Program (up to $50,000, for existing loans), • Health care benefits available, • VA home loans, • Bonuses, if applicable, • Military enlistment in the Army National Guard, • Must be at least a junior in high school, or have a high school diploma or a GED certificate, • Must be between the ages of 17 and 35, • Must be able to pass a physical exam and meet legal and moral standards, • Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability.

Job Description Stryker Vehicles are fast, highly-mobile combat vehicles used by the military to triumph on the battlefield. As a Stryker Systems Maintainer for the Army National Guard, you will be responsible for keeping the Stryker systems functioning to ensure the success of each and every mission. In this role, you will be supervising and performing maintenance on various Stryker systems and vehicles including: the M1128 Mobile gun system, the M1132 Engineer support vehicle, the M1133 Medical evacuation vehicle, and the M1135 NBC recon vehicle. Job Duties • Perform field and sustainment-level maintenance on various vehicle systems to include the suspension systems, steering systems, hydraulic systems, fire extinguisher/suppressor systems, and vehicle mounted armament, • Supervises compliance with shop safety program and use, and maintenance and security of power tools, • Diagnoses and troubleshoots malfunctions, • Supervises and provides technical guidance to junior-grade Soldiers, • Performs battlefield damage assessment and repair Some of the Skills You’ll Learn • Engine disassembly and repair, • Repair of hydraulic, fuel, and electrical systems, • Repair and maintenance of armament systems Helpful Skills • Interest in mathematics, shop mechanics, and engine mechanics, • Ability to use hand and power tools Through your training, you will develop the skills and experience to enjoy a civilian career with auto and construction equipment dealers and farm equipment companies. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for a Styker Systems Maintainer consists of 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 17 weeks of Advanced Individual Training (AIT) with classroom instruction, involving practice in repairing and replacing equipment parts. Benefits/Requirements Benefits • Paid training, • A monthly paycheck, • Montgomery GI Bill, • Federal and State tuition assistance, • Retirement benefits for part-time service, • Low-cost life insurance (up to $400,000 in coverage), • 401(k)-type savings plan, • Student Loan Repayment Program (up to $50,000, for existing loans), • Health care benefits available, • VA home loans, • Bonuses, if applicable, • Military enlistment in the Army National Guard, • Must be at least a junior in high school, or have a high school diploma or a GED certificate, • Must be between the ages of 17 and 35, • Must be able to pass a physical exam and meet legal and moral standards, • Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability.

Job Description COME JOIN MID-CONTINENT! “Where your work is valued—above-market pay, real work-life balance, and a team that feels like home.” THE POSITION… As an Electrical Design Engineer, you will design electrical power conversion products for aircraft critical systems and cabin applications. Experience the entire product lifecycle, from concept and requirements, through design, implementation, testing and certification and field application. To be successful in this role, you’ll need to be familiar with several technologies including DC-to-AC inverters, DC-to-DC converters, AC-to-DC converters, AC-AC converters, power regulation for battery systems, power distribution and control. You can expect opportunities ranging from 10W to 600W+ capabilities. THIS POSITION MAY BE FOR YOU IF… • You have a master’s degree in electrical engineering or Bachelor of Science degree in electrical engineering., • You have a minimum of 5 years of experience designing power conversion products., • You have proficiency in designing and troubleshooting analog circuits and switch-mode power electronics., • You have a background in magnetics including power transformers and filters., • You are proficient with Microsoft Office., • You are able to work in a team environment., • You have strong attention to detail., • You are organized, focused and results oriented., • You are a problem-solver with critical thinking and prioritizing skills., • You have experience designing to environmental requirements such as RTCA DO-160 or similar aerospace, military, or commercial standards., • You have experience with PADS, or similar schematic capture, and PCB layout software, and PSpice or LTSpice simulation tools., • Create schematics and direct PCB layout using PADs, • Research new components, technologies, and methods to incorporate into new designs, • Coordinate with other functional teams, including layout, mechanical, software, and certification engineers, • Build and troubleshoot hardware, including soldering, operation of test equipment, and daily work in both office and test lab environments, • Design and execute test procedures to verify compliance with applicable performance, regulatory, and quality requirements, • Design and integrate manufacturing tools as needed for new products, • We provide competitive pay and a comprehensive benefits package., • We promote an environment where you can excel in your career while still maintaining a healthy work-life balance., • Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment., • We believe anything worth doing is worth doing right – every time., • We have frequent events to keep work interesting. Our food drive is super impressive, we have an annual food truck fest employee appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with prizes and we sponsor our employees in community walk/run activities. Mid-Continent Instruments and Avionics, founded in 1964, repairs, designs and manufactures aircraft avionics and other instruments to customers across multiple aviation segments. We operate one of the largest maintenance, overhaul and exchange programs in the world. A leader in the design and manufacture of advanced lithium-ion aircraft batteries, USB chargers, inverters and converters, our True Blue Power products provide power solutions for the global aerospace industry. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you’ll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 90000-135000 Yearly Salary PIe319dda136fa-25405-40218744

Job Description You must be a U.S. citizen to apply for this position COME JOIN MID-CONTINENT! “Where your work is valued—above-market pay, real work-life balance, and a team that feels like home.” THE POSITION… As a Program Engineer, you will lead the technical interface between sales account managers and design engineers to secure programs and provide aftermarket support to customers. Programs include new product development and existing product qualification and certification efforts for aviation products such as cockpit avionics, power conversion equipment, and battery systems. To be successful in this role, you will need to effectively collaborate with cross-functional teams and external customers. THIS POSITION MAY BE FOR YOU IF… • You are a U.S. Citizen., • You have a Bachelor of Science in Electrical, Mechanical or related engineering field., • You have a minimum 2 years of relevant experience in a related aviation field., • You have strong program/project management skills., • You have an understanding of, or experience with electrical and electromechanical products., • You are proficient with Microsoft Office., • You have strong attention to detail., • You are organized, focused and results oriented., • You are a problem-solver with critical thinking and prioritizing skills., • You have knowledge of aviation certification (Type Certificate and Supplemental Type Certificates) and qualification topics., • You have knowledge of aviation standards, such as RTCA/DO-160, DO-178, DO-254, MIL-STD-810, MIL-STD-461, etc. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT… • Lead the internal technical interface between engineering and the customer, either directly and/or through the sales account manager, • Create, collect, consolidate, and/or summarize technical data to meet customer requirements and deliverables, • Drive projects to meet company and engineering time, cost and requirements targets, • Serve as the gatekeeper for intellectual property (IP) in accordance with company policy, • Support new sales efforts by reviewing proposal requirements and determining compliance, • Work closely with engineering project managers and teams to assess status and represent progress to sales account managers and customers, • Provide product-level expertise on functions, features, qualifications, and capabilities, • We provide competitive pay and a comprehensive benefits package., • We promote an environment where you can excel in your career while maintaining a healthy work-life balance., • Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment., • We believe anything worth doing is worth doing right – every time., • We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives and frequent ticket raffles for local sporting and cultural events. Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you’ll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 80000-120000 Yearly Salary PId351660ddf87-25405-40219083

Company Description “Build your best future with BHC-BOSCH.” Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing. • Competitive salary, • Paid vacation/holidays/sick time, • Comprehensive benefits package including 401K, medical, dental, and vision care, • On the job/cross training opportunities, • Encouraging and collaborative team environment, • Dedication to safety through our Zero Harm policy Job Description The Facilities Engineer will ensure the safety, reliability, and efficiency of the overall site and manufacturing facility and its infrastructure by overseeing facilities related maintenance and upgrades in coordination with Engineering and Maintenance staff as well as outside contractors. Key duties include maintaining facility infrastructure, coordinating preventive maintenance for utility services, managing budgets for repairs and upgrades, and ensuring compliance with safety and industrial regulations. This role also involves providing direction and guidance for a third-party facilities staff, handling emergency responses, and contributing to facility planning and improvement initiatives. Key Responsibilities • Maintenance and Operations:, • Develop, implement, and manage preventive maintenance programs for all facility systems, including HVAC, electrical, plumbing, mechanical, and fire protection systems., • Monitor and inspect building systems and equipment to ensure optimal performance, efficiency, and compliance with all applicable codes and regulations., • Troubleshoot and resolve facility-related issues, responding promptly to emergency situations involving infrastructure failures., • Project Management:, • Lead the design, implementation, and management of facility upgrades, renovations, and new construction projects., • Create project plans, specifications, and cost estimates for projects, managing budgets and timelines to ensure successful completion., • Coordinate with external contractors, vendors, and service providers for specialized tasks and project execution., • Compliance and Safety:, • Ensure all facility operations and modifications adhere to health, safety, environmental, and building codes and regulations., • Conduct regular facility inspections and audits to identify potential safety hazards and implement corrective actions., • Provide guidance and training to maintenance staff and other personnel on safety procedures., • Budgeting and Reporting:, • Develop and manage budgets for facility maintenance and capital improvement projects., • Maintain accurate records of all maintenance activities, facility modifications, and operational performance metrics., • Prepare detailed reports on facility operations, project status, and energy usage for management review., • Sustainability and Efficiency:, • Implement energy-saving initiatives and sustainability programs to reduce operational costs and environmental impact., • Monitor and analyze energy and water usage to identify trends and drive efficiency improvements. Qualifications Required: • Bachelor’s degree in mechanical, Electrical, Civil Engineering, Facilities Management, or a related field., • Minimum of 5 years of experience in facilities engineering or management., • Strong understanding of building systems, including HVAC, electrical, and plumbing., • Demonstrated experience in project management, including budget oversight and stakeholder communication., • Excellent problem-solving, analytical, and organizational skills with a strong attention to detail., • Familiarity with industry safety standards, building codes, and regulations. Preferred: • Professional Engineer (PE) license or other relevant professional certification (e.g. CFM, IFMA, LEED)., • Experience with Building Management Systems (BMS) and Computerized Maintenance Management Systems (CMMS)., • Experience with security and maintenance of large facilities., • Proficiency with CAD software and facilities design principles., • Experience in a HVAC manufacturing environment. Physical Requirements • Ability to stand, walk, climb ladders, and lift heavy loads (up to 50 lbs.)., • Capability to work in various environments, including mechanical rooms, confined spaces, and outdoors., • Availability to respond to on-call and after-hours emergencies as needed. Additional Information Equal Opportunity Employer, including disability / veterans *Bosch adheres to Federal, State, and Local laws regarding drug-testing. Employment is contingent upon the successful completion of a drug screen and background check. Candidates who have been offered the position must pass both screenings before their start date. Your well-being matters at Bosch! We offer a competitive compensation and a benefits package designed to empower you in every area of your life. This includes premium health coverage, a 401(k) with generous matching, resources for financial planning and goal setting, ample paid time off, parental leave, and comprehensive life and disability protection. We're investing in your success! #LI-CB1

Job Title: Nuclear Engineer (Naval Reactors Engineer) Category / Component: Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards. Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation. What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication. Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding. Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields. Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Location: On-site – Wichita, KS Tenure: Ongoing Contract Relocation: Open to candidates willing to relocate Looking for • Intermediate Stress Engineer: 5–10 years Program Details This role supports Boeing aircraft programs including: • Boeing 737 (primarily metallic structure), • Boeing 777 (hybrid structure) Candidates must have hands-on experience in Static and Fatigue analysis. Role Overview – MRB Stress Engineer The Stress Engineer will assess and approve structural repairs for aerospace non-conformities (in-service components). The role focuses on maintaining structural integrity while minimizing production delays. Key Responsibilities: • Perform structural impact analysis on aircraft components, • Conduct static, fatigue, and damage tolerance analyses, • Develop and validate repair solutions in compliance with FAA/EASA/FAR standards, • Review and approve engineering drawings, • Collaborate with cross-functional teams (design, materials, manufacturing), • Support production teams in resolving structural issues, • Document engineering justifications and reports, • Bachelor’s Degree in Engineering (or related field), • 5–10 years (Intermediate) OR 11+ years (Senior) in aerospace stress analysis, • Experience with metallic and/or composite aircraft structures, • FEM/FEA experience in the aircraft industry, • Proficiency in PATRAN, NASTRAN, • Knowledge of static and fatigue analysis, • Strong documentation and communication skills If this opportunity aligns with your experience and career goals, I would be happy to schedule a time to discuss further. Please feel free to share your updated resume and availability for a brief conversation.

As a family-run, high-tech company with nearly 19,000 employees at 71 locations worldwide, we are looking for forward thinkers with unconventional ideas and drive to join our team. Our company culture, which values collaboration and mutual trust, creates the ideal framework for boldly trying new things and questioning the status quo. Our technologies inspire people to develop and produce things that are currently unimaginable. Whether lasers, machine tools, EUV or electronics - TRUMPF is building technological worlds for future generations. Are you ready for new challenges? Do you thrive when solving problems on your own or as part of a team? Do you enjoy travel, learning about new places, and meeting new people? Are you interested in becoming a skilled mobile service technician? This opportunity reports into our Farmington, CT office and is offered as 100% remote. Your new role: TRUMPF Field Service Engineer • Travel to install, services, troubleshoot and repair TRUMPF CNC fabricating machine tools at customer sites throughout the United States, Canada and Mexico, • Provide high-quality technical service to customers to ensure optimal sheet metal machine performance., • Document customer machine information and technical conditions and make improvement suggestions., • Train customers to operate and/or service machines to ensure maximum productivity., • Act as a TRUMPF Service ambassador and work directly with customers during installations and repairs to enable their business success. Why TRUMPF is right for you • At TRUMPF, you can develop your career by working on a wide range of innovative products across many exciting technologies., • You have the opportunity to continuously grow within your existing role and be rewarded for it., • We are an international company, offering employees opportunities in the U.S. and around the globe., • We are a family-owned business with a long-term strategy. We care about all the members of our team. You should be • Flexible, professional, curious, and bold!, • A hands-on problem solver experienced in electronics, digital circuits, wiring, mechanics, and hydraulics., • Focused on customer service and quality., • Technologically savvy and experienced in software and file management., • Eager to travel 100% In return we offer • Competitive salary, • A generous benefits package that includes medical, vision, dental, 401K plans, and parental leave, • Opportunities to advance and further your career TRUMPF Inc. endeavors to make TRUMPF careers pages accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance in completing the applications process, please contact our HR department at 860.255.6000 or at ___.This contact information is for accommodation requests only and can not be used to inquire about the status of application.

Ames Construction has been building America for more than 60 years, and the people who work here are thereasonwe continue to succeed. We are a full-service,heavy civil and industrial contractorbuildingcritical infrastructure, includinghighways, bridges, mines,dams,rail, andmore.Ourteams take on challenging projects that keep communities safe, supply chainsmoving,and the country connected. At Ames, we areFueled by FamilyandDriven by Ownership. That means welook outfor one another, take pride in what we build, and take responsibility for our actions, our results, and the long-term health of the company. Guided by our core values ofPeople, Team, Our Bond, Persistence, and Vision, we do what we say we will do, push throughchallengesand deliver workwe'reproud of. When you join Ames,you'rejoining a company built for long-term success-where skilled people, strong teams,and disciplined execution come together to build careers and a better future. Please note: Visa sponsorship is not available at this time for this position. The Field Engineer is responsible for managing large and complex construction work at the project site to ensure operations run safely, smoothly, and effectively. This position has a wide range of job responsibilities, depending on the area of specialization. These duties might include working on road, bridge, building, steel structures, or other large projects. This position is classified as "safety-sensitive." Essential Functions • Designs temporary structures used during construction with emphasis on safety considerations, • Inspects installed equipment and technologies. Solves issues that may arise., • Directs foremen or workers on-site, • Conducts research and accurately reports on project status, • Performs quality control inspections and checks work for compliance with contract documents, • Verifies proper materials are used, and that the installations meet project timelines and requirements, • Affirms safety compliance and enforces proper protocols and PPE on site, • May oversee project budget and communications Qualifications • A Bachelor's degree in Engineering or closely related field, • A minimum of one (1) year of previous experience as a field engineer or similar role, • Well-versed in technical aspects of field projects, including machinery, equipment, and construction processes, • Thorough understanding of safety guidelines (OSHA statutes), • Attention to detail, • Outstanding communication skills, • An analytical mind and strong problem-solving ability, • Ability to work in adverse weather and occasional overtime and weekends Working Conditions • Travel - This role will be expected to travel to project locations, sometimes nationally, • Construction site environment - physical ability to stand, walk, crawl, bend, reach and climb. May be exposed to high noise levels., • Compensation: $55,000-$75,000 Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Ledcor Technical Services has been building and servicing communication networks for customers across North America since 1979. Utilizing our broad expertise and experience, we customize solutions to best meet our client's needs. We act as a key partner for our clients by delivering exceptional quality, reliability, and safety in all that we do. As a Field Construction Manager with Ledcor Technical Services, you will take the lead in our daily field operations. You will ensure that projects are delivered on schedule, within budget, and to the highest quality standards. In this role, you will execute project plans and schedules, uphold site safety and quality control, and manage the work of field staff, contractors, and tradespeople. Your leadership will be central to keeping our projects running smoothly and successfully. Join our True Blue team today and help build the networks of tomorrow! Essential Responsibilities: * Ensure all construction activities comply with approved plans, specifications, shop drawings, building codes, and established quality standards including oversight of PQP requirements and testing * Champion site safety by enforcing corporate and regulatory standards, leading safety meetings, and supporting development of the Project Specific Safety Program (PSSP) * Monitor short-term schedules, estimate activity durations and material needs, and track progress to meet project milestones and completion dates * Direct field staff and coordinate labor, equipment, and subcontractor resources to achieve project goals related to safety, schedule, and quality * Supervise craft workers and subcontractors, providing guidance and maintaining accountability for performance and site expectations * Manage procurement tasks such as preparing purchase requisitions and reviewing supplier and subcontractor invoices Qualifications: * One to five years of construction experience as a supervisor, lead hand, or in a similar supervisory role * Knowledge of underground fiber instillation methods is a plus. (Plow and Horizontal Directional Drill, HDD) * Two-year college, trade, or technical diploma (preferred) * Understanding of current construction practices, documents, costs, and budgets * Ability to plan and manage project schedules, developing solutions for moderate situations within defined guidelines * Effective communication skills, with the ability to collaborate with multiple stakeholders while building and managing a diverse team * Strong organizational and planning skills * Military experience equivalent to 12N Horizontal Construction Engineer and/or 12H Construction Engineering Supervisor Working Conditions: * Able to meet the physical requirements of the position which involves sitting, standing, bending, climbing, lifting (up to 50 pounds), working at heights, and in all types of weather conditions (rain, snow, heat etc.) * This is a site-based position that will require travel as needed to various Ledcor offices and project sites Additional Information Ledcor Technical Services (LTS) designs, builds, and maintains wireline or wireless networks that span North America and beyond. We are a proven leader and innovator in telecommunications network construction, maintenance, and service installation and repair. Ledcor has been recognized as a Top 100 Inspiring Workplace in North America. Our competitive total rewards package provides compensation and benefits that support your physical, mental and financial well-being. We offer exciting, challenging work with opportunities to develop your skills and knowledge. Employment Equity At Ledcor we believe diversity, equity, and inclusion should be part of everything we do. We are proud to be an equal-opportunity employer. All qualified individuals, regardless of race, color, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status or any other identifying characteristic are encouraged to apply. Our True Blue team consists of individuals from all backgrounds who contribute diverse perspectives and experiences to Ledcor. For more information about Ledcor's Inclusion and Diversity initiatives, please visit our ______ Adjustments will be provided in all parts of our hiring process. Applicants need to make their needs known in advance by submitting a request via ___. All applicants must be able to show proof of eligibility to work in the United States. Ledcor participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the United States. E-Verify is a registered trademark of the U.S. Department of Homeland Security Link to: ___

Join Our Innovative Team as an Electrical Engineer - Shape the Future of Energy Solutions! Are you passionate about pushing the boundaries of energy technology? We're looking for a talented Electrical Engineer to be a key player in our building improvement projects. In this role, you'll design cutting-edge electrical infrastructure to help clients achieve their energy goals with smart, sustainable solutions. At Willdan, you'll join a collaborative and diverse team of mechanical and electrical engineers, solar design experts, project managers, and more. Together, we work to create resilient, efficient, and cost-effective electrical distribution systems that meet the highest standards of excellence. As an Electrical Engineer at Willdan, your contributions will directly impact the future of energy systems. You'll have the opportunity to: • Lead Innovation: Create and design creative electrical systems that transform how energyis used., • Collaborate Across Teams: Work alongside experts in multiple fields to deliver groundbreaking solutions., • Drive Change: Take ownership of projects and make a real impact on the success of our clients' energyobjectives. The Senior Electrical Engineer is responsible for designing the Electrical Infrastructure for our building energy conservation projects. The ideal candidate will have an advanced understanding of power distribution and Distributed Energy Systems (DERs) as it applies to high performance buildings across various vertical markets including commercial, local & state governments, light industrial, educational and health care facilities. Essential Duties and Responsibilities • Experience with electric building design. Design electrical systems upgrades and improvements to improve energy efficiency. Point to Point understanding of power distribution and interconnection to the Utility Grid to the Service Entrance down to the end use receptacle. Advanced knowledge of energy conservation guidelines using IECC, Title24 and projects with LEED Certification., • Fundamentals of Power Distribution. Advanced Understanding of electrical theory covering 3-phase and 1-phase power, power triangle & power factor, Grounding, Principles of Magnetism applied to Transformers and Motors., • Perform Complex Engineering Calculations & Analysis (see qualifications below). In-depth understanding of software apps and resources used in Electrical Engineering (SKM, ETAP, CYME, Excel Tools, etc.)., • Stand By Power and Alternative Energy Sources. Size combustion generators as it applies to high-performance buildings and electrical distribution systems, automatic transfer switches. Emphasis on integrating DER components including PV, BESS and EV charging. Exposure to microgrid design and/or integrating BESS and microgrid controls into solar PV and EV infrastructure projects is a bonus., • Strong Understanding of utility interconnection requirements. Design the electrical infrastructure and protective relays required by the utility for on-site generation. Support the DER team and their efforts as they work with utility providers to submit the required documentation and complete the utility interconnection process., • Excellent Time Management Skills. Ability to work on multiple projects of varying complexities. Ability to work on concurrent projects across multiple geographical regions. Work under limited supervision., • Prioritize Workflow. Able to prioritize project workflow to meet deadlines with minimal supervision, completing projects on time. Paying special attention to quality, accuracy and effort against budget., • Succeed as a Team. Enjoy working within design teams and meeting the project goals in a team-focused environment. Collaborate with other disciplines. Work with local agencies having jurisdiction to ensure compliance with federal, state and municipal requirements and building codes. Support company standards, work with project managers to exceed client expectations., • Forward Thinking. Leverage your creativity and explore new technologies and products., • Supports design team efforts to identify, recommend, and implement new technologies and systems to improve organizational processes and decision-making. Develop innovative solutions that reduce costs with no impact on quality, or long term reliability., • Ability to research new concepts, technologies and apply integrate into our projects., • Start to Finish. You will develop concepts from the ground up. Use information from site visit to develop concept. Produce construction drawings (CDs) using CAD software. Complete CDs and apply for permit. Work with construction teams and contractors to see our designs installed in the field. Review and approval of equipment submittals., • Articulate. The candidate must possess excellent verbal and written communication skills, as well as interpersonal skills. Comfortable presenting to clients, team members and internal leadership., • Occasional Travel Required (~15%). Site visits to document the existing infrastructure. Provide engineering evaluations, electrical systems audits, and construction support as needed., • Bachelor's degree or higher. Electrical engineering, architectural engineering, or building science from a fully accredited ABET program., • PE License is Required., • 8+ years of electrical design experience with commercial, education, government or light industrial projects typically at an MEP consulting firm., • Advanced Understanding of low voltage systems 600V and lower, both AC and DC distributions. Includes 480/277V, 208/120V and 240/120V systems, single phase or three phase. Medium Voltage experience is a plus., • Perform Engineering Calculations. Includes: fault current studies, Arc Flash Analysis, Selective Coordination Studies, Service Entrance Calculations, Transformer Sizing, Overcurrent Protection of Motors & Transformers, Conduit Fill and Conductor Sizing with applicable derating factors., • Knowledge of applicable building codes and regulations including IEEE, NFPA, NEC (NFPA70), California Electric Code (CEC) & Title 24, UL Listings, Life Safety, IBC, and OSHA., • Technical Understanding of Grounding and Bonding., • Expansive product knowledge of manufacturers (Eaton, Schneider, ABB, Siemens, etc.)., • Ability to size and specify distribution equipment: diesel generators, electrical switchgear & switchboards, panelboards, disconnect switches, etc., • Assemble and compile Division26 specifications., • Take Ownership of Projects. Ability to take a project from the initial site visit into preliminary design through Construction Drawing completion. Stay actively involved with the project during the permit process and into Construction., • Proficient in AutoCAD, Revit is a plus., • Skilled in Microsoft Office, Excel, and Teams; working knowledge of Bluebeam Revu. Willdan Energy Solutions participates in E-Verify.

The position requires a Bachelor's degree and 2-5 years of experience in Engineering or Laboratory Technology. A global healthcare leader is seeking a Field Service Engineer to support diagnostic instruments, ensuring optimal performance and compliance.

Your new role: TRUMPF Field Service Engineer Travel to install, service, troubleshoot and repair TRUMPF CNC fabricating machine tools at customer sites throughout the United States, Canada and Mexico Provide high‑quality technical service to customers to ensure optimal sheet metal machine perfor

Your new role: TRUMPF Field Service Engineer Travel to install, services, troubleshoot and repair TRUMPF CNC fabricating machine tools at customer sites throughout the United States, Canada and Mexico Provide high-quality technical service to customers to ensure optimal sheet metal machine performan

Your new role: TRUMPF Field Service Engineer.

Electronics Field Service Engineer – Based South East - £41,000 starting salary plus overtime package**is looking to recruit to the Field Service department an Electronics Field Service Engineer to maintain, repair and commission gas detection equipment. Field Service Engineer - Based South East

A leading engineering firm is seeking a Reactive Field Service Engineer based in Wichita, Kansas. Key responsibilities include conducting repairs and maintenance, providing excellent customer service, and ensuring compliance with health and safety standards.

A leading gas detection firm is seeking a Field Service Engineer to join their team.

As a Field Service Engineer II, you’ll support customers as a trusted technical expert, responsible for installing, maintaining, and troubleshooting diagnostic instruments while ensuring compliance and customer satisfaction. We’re hiring aField Service Engineerwithin our Diagnostics Division

A family-owned high-tech company is seeking a Field Service Engineer to provide installation and repair services for CNC fabricating machine tools across North America. The ideal candidate will have a customer service focus, a hands-on problem-solving approach, and experience in electronics and mech

Job Description COME JOIN MID-CONTINENT! “Where your work is valued—above-market pay, real work-life balance, and a team that feels like home.” THE POSITION… As a Software Engineer, you will provide engineering expertise towards the design and manufacture of existing and emerging technologies, systems, and capabilities. You will design avionics, power electronics, and battery systems with an emphasis on embedded software solutions to create compelling new products. You’ll create unique intellectual property to address the growing demand for software-defined behavior. You can expect a variety of opportunities ranging from products for cockpit displays, instruments and navigational references based on local and remote sensor inputs. Additional products include data conversion and storage, lithium battery management, AC and DC power conversion, and in-seat power solutions. THIS POSITION MAY BE FOR YOU IF… • You have a Bachelor of Science in Computer Engineering or related field., • You have a minimum of 2 years of experience designing embedded software., • You are proficient in C programming., • You have the ability to work directly with target hardware in a lab environment, including bench equipment and other tools for debugging and analysis., • You are proficient with Microsoft Office., • You have strong attention to detail., • You are organized, focused, and results oriented., • You are a problem-solver with critical thinking and prioritizing skills., • You have experience designing safety-critical software within RTCA DO -178C, DO-254 or similar process., • You have experience with C# for PC application software., • You have experience programming in VDHL., • You have experience with Design for Manufacture and Design for Test (DFM & DFT)., • Design and implement embedded C software for bare-metal microcontroller-based systems with an option for VHDL firmware for FPGA-based systems, • Research new components, technologies, and methods to incorporate into new designs, • Design tools to support manufacturing, calibration and verification of safety-critical products, • Build and troubleshoot hardware, including basic soldering, operation of test equipment, and daily work in both office and test lab environments, • Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements, • We provide above-market pay and a comprehensive benefits package., • We promote an environment where you can excel in your career while maintaining a healthy work-life balance., • Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment., • We believe anything worth doing is worth doing right – every time., • We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you’ll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience.

Job Description COME JOIN MID-CONTINENT! “Where your work is valued—above-market pay, real work-life balance, and a team that feels like home.” THE POSITION… As a Software Certification Engineer, you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will plan and implement the RTCA DO-178C and DO-254 lifecycle processes for avionics, power electronics, and battery systems. You’ll verify complex microcontroller and FPGA designs to achieve coverage of functional and structural aspects. Product areas include cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, AC/DC and DC/DC power conversion up to 8000W, in-seat power solutions, and various other components needed in aircraft systems. To be successful in this role, you’ll need to provide expert analysis to meet the highest level of safety and reliability, implementing safety-critical software design processes. THIS POSITION MAY BE FOR YOU IF… • You have a bachelor’s degree in computer engineering or related field, • You have a minimum of one year of experience with RTCA DO-178C or similar safety-critical software design process., • You are proficient in C programming., • You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis., • You are proficient with Microsoft Office., • You have strong attention to detail., • You are organized, focused and results oriented., • You are a problem-solver with critical thinking and prioritizing skills., • You have experience with C#, or Python languages for a PC application software., • You have familiarity with VHDL and RTCA DO-254., • Create and review design data within the software qualification lifecycle process. Practice safety-critical methods, create plans, requirements, design standards, coding standards, change tracking and verification, formal and functional verification, • Test and troubleshoot prototype and certified code on target hardware. Includes working in a lab bench environment with the necessary test equipment, • Design embedded software for microcontroller-based systems, as well as PC-based applications for verification and manufacturing, • Support software design using current tools, design environments and documentation methods, • We provide competitive pay and a comprehensive benefits package., • We promote an environment where you can excel in your career while maintaining a healthy work-life balance., • Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment., • We believe anything worth doing is worth doing right – every time., • We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you’ll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience.

Job Description COME JOIN MID-CONTINENT! “Where your work is valued—above-market pay, real work-life balance, and a team that feels like home.” THE POSITION… As a Software Engineer, you will provide engineering expertise in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will design avionics, power electronics, and battery systems with an emphasis on embedded software solutions to create compelling new products. You’ll create unique intellectual property to address the growing demand for software-defined behavior. You can expect a variety of opportunities ranging from products for cockpit displays, instruments and navigational references based on local and remote sensor inputs. Additional products include data conversion and storage, lithium battery management, AC and DC power conversion, and in-seat power solutions. THIS POSITION MAY BE FOR YOU IF… • You have a Bachelor of Science in computer engineering or related field., • You have a minimum of 10 years of professional experience designing embedded software., • You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis., • You have proficiency in C programming., • You are proficient with Microsoft Office., • You have strong attention to detail., • You are organized, focused, and results oriented., • You are a problem-solver with critical thinking and prioritizing skills., • You have experience designing safety-critical software, utilizing RTCA DO-178C, DO-254 or a similar process., • You have experience with C# for PC application software., • You have experience programming in VHDL., • You have experience with Design for Manufacture and Design for Test (DFM & DFT)., • Design and implement embedded C software for bare-metal microcontroller-based systems with an option for VHDL firmware for FPGA-based systems, • Research new components, technologies, and methods to incorporate into new designs, • Design tools to support manufacturing, calibration and verification of safety-critical products, • Build and troubleshoot hardware, including basic soldering, operation of test equipment, and daily work in both office and test lab environments, • Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements, • We provide competitive pay and a comprehensive benefits package., • We promote an environment where you can excel in your career while maintaining a healthy work-life balance., • Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment., • We believe anything worth doing is worth doing right – every time., • We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you’ll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience.

Job DescriptionDescription: The Manufacturing Engineer carries out engineering work activities and directs resources necessary to support new product development and sustaining current products at XLT. This role ensures products and processes meet quality, cost, delivery, safety, and service expectations. The Manufacturing Engineer plays a critical role in continuous improvement, lean manufacturing, tooling and fixture design, process development, and technical problem-solving. This position also serves as backup to the Engineering Supervisor and provides leadership, coaching, and direction to Team Members assigned to engineering projects. Primary Responsibilities: · Abide by the company’s Quality Management System · Prioritize customer satisfaction and maintain compliance with statutory and regulatory requirements · Protect the company’s assets, reputation, goodwill, and marketplace stature at all costs Essential Functions: This position will perform the below listed duties consistently, accurately, timely, safely, and at the lowest feasible cost: Quality, Culture & Leadership · Reinforce that Customer satisfaction is our first priority, including compliance with all statutory and regulatory requirements. · Protect the Company’s assets, reputation, goodwill, and stature in the marketplace. · Provide instruction, guidance, and coaching to Team Members assigned to projects. · Be accountable for the work and actions of Team Members assigned to projects. · Enforce and support the training matrix to ensure competency and compliance. Engineering & Manufacturing Excellence · Understand the engineering and functionality behind all current XLT products. · Identify and eliminate waste in production processes using lean manufacturing principles. · Identify improvement opportunities and carry solutions through implementation. · Design and create jigs, fixtures, and tooling to improve manufacturing efficiency. · Conduct and implement results from lean manufacturing and process studies. · Design control systems to coordinate activities and production planning to ensure quality and safety standards are met. · Develop and implement new manufacturing processes. · Troubleshoot current XLT products across production and field applications. · Build first-article parts, components, and assemblies for new products and processes. · Develop work instructions, job training materials, and process documentation. · Understand XLT’s manufacturing capabilities and constraints for sustaining current product lines. · Design products and components with manufacturability and efficiency in mind. · Improve manufacturing methods for products and parts and complete production approvals. Planning, Analysis & Collaboration · Participate in workforce utilization planning, space requirements, workflow analysis, and equipment layout for maximum efficiency. · Collaborate with the Engineering Manager on product design and tooling decisions. · Work with vendors to determine specifications, source equipment/materials, and evaluate quality and compliance. · Estimate production times, staffing requirements, and related costs to support management decisions. · Confer with Management, Engineering, and cross-functional Team Members regarding manufacturing capabilities and production schedules. · Apply statistical methods to estimate future manufacturing requirements. · Perform all other duties as assigned by the President. Requirements: Minimum Qualifications: · Strong mechanical aptitude and hands-on problem-solving ability · Lean manufacturing and continuous improvement mindset · Leadership and coaching skills · Excellent communication (written and verbal) · Strong analytical, decision-making, and organizational skills · Ability to prioritize work and perform under pressure · High attention to detail and commitment to quality · Proficient with common hand and power tools Core Values: · Teamwork – Give more than you take · Excellence – Strive to win at what we do · Integrity – Do what’s right, even when it’s hard · Respect – Treat others as you want to be treated Physical Requirements: · Ability to lift up to 50 pounds · Ability to stand, walk, and use hands for up to 10 hours per day · Ability to climb, balance, stoop, kneel, crouch, and crawl as needed Mental Requirements: · Basic math skills (add, subtract, multiply, divide) · Read, speak, and write English clearly · Convey information effectively and judge distances, shapes, and fits Required Reading/Development · XLT Quality Manual · Kaizen Revolution · The Little Big Things · How to Win Friends and Influence People · 2 Second Lean

Job Description Job Title: Field Service Engineer Job Description We are looking for a skilled Field Service Engineer who will provide electrical and controls engineering expertise in support of new equipment and system introductions. This role requires an individual to be an internal subject matter expert in control systems, system integration, sensors, and electromechanical devices. The position involves applying knowledge of electronics, electrical circuits, mechanics, pneumatics, hydraulics, and programming. Responsibilities • Provide electrical and controls engineering expertise in support of new equipment and system introductions., • Act as an internal subject matter expert in control systems such as Siemens PLC, HMI, and Motion Control Systems., • Integrate systems, sensors, and electromechanical devices., • Travel to customer sites for machine commissioning and troubleshooting support., • Troubleshooting electrical control panels., • PLC programming languages understanding., • CNC troubleshooting experience., • Knowledge of NC Controllers, specifically Siemens 840D or WINCC. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Process Engineer Purpose Communicates and resolves manufacturing related issues in a fast-paced environment while supporting the Quality and Manufacturing functions by educating employees on quality systems, quality metrics, and customer engineering. Ensures that processes and products consistently meet established quality standards internally as well as externally. Works with a diverse group of team members in a collaborative method. Education and Experience • Bachelor’s degree in Engineering, Management or related field or equivalent work experience, preferably in the Aerospace Industry, • Provide training, learning and development where appropriate for all employees, • Provide training as required in quality system concepts, audit techniques, approaches corrective/preventative actions and continuous improvement activities., • Partner with other departments to ensure the adherence to the Quality Management System and other compliance requirements., • Collaborates with operations, leaders, purchasing, customer service and others to efficiently meet customer demand., • Excellent verbal and written communication skills to interact and deal with internal and external customers, • Supports all regulatory and customer quality audits as needed, • Provide visibility to management of potential manufacturing issues, as well as input on internal perceptions associated with Quality and Delivery performance., • Works with Manufacturing and Quality Assurance personnel to perform in process review and assure best practices are followed., • Works with Manufacturing and Quality Assurance to implement cost savings through VSM exercises, and continuous improvement initiatives., • Review applicable organizational policies and procedures, ensuring accuracy and relevance, communicating policy and procedure updates and changes, • Performs other related duties, as required, • Has the capability to troubleshoot complex and questionable manufacturing issues by asking the right questions to get to the root cause of the problem, • Ability to work in a dynamic environment with multiple priorities and shifting time requirements., • Makes decisions based on customer/regulatory/internal requirements, • Ability to effectively communicate in small and large group environments, • Confer with organizational team members at all levels to discuss issues, coordinate activities or resolve problems., • Implement corrective actions to address organizational or departmental issues., • Must be an engaged leader with a “hands on” approach to process improvement, • Fully understanding the financial impact of decisions made on a daily basis, including closely monitored non-value added cost in an effort to reduce or eliminate., • Work closely with shop floor leadership and employees, • Analyze customer miss-deliveries in order to propose improvement action plans: Define and optimize data gathering and exchange to ensure data integrity in systems., • Assess and report project opportunities, risks and potential solutions.

Job DescriptionJob Title: Field Service Engineer Position available in: Wichita, KS Job Type: Full time Positions Available: 2 Broetje Automation is the world’s leading expert & OEM in aircraft manufacturing automation and robotics, working with the top names in our industry. Worldwide locations include: Germany, USA, France, United Kingdom, China, and Japan. US locations include: Charleston (SC), Savannah (GA), Wichita (KS), and Seattle (WA). Compensation/Benefits: • Competitive hourly wage, ranges $34.00 – 43.00/hour, plus overtime & shift differential, • 6% 401(k) company match, no vesting period, • 100% paid healthcare coverage (medical, dental, vision), • Disability plan & group life insurance program, • 3 weeks Paid Time Off (PTO) plus 13 paid holidays, including 3 floating holidays, • Tuition reimbursement program, up to $10,000/yr, • BS in Electrical, Controls, Mechatronics, or Electro-Mechanical Engineering preferred, or comparable experience with industrial robotics or machine tools., • Technical Certificate OR BS in Electrical/Mechanical Engineering, and 3+ years of experience within the industrial automation industry or equivalent experience., • Strong mechanical aptitude from prior professional experience., • Siemens Step 7 PLC troubleshooting experience, • Siemens TIA Portal; Sinumerik One, • CNC troubleshooting experience, • Experience in IEC61131 (PLC programming languages), • Strong fundamental understanding of electrical design practices, machine/motion control systems, electro-mechanical systems, robotics, programming, and system integration, • Understanding of PLC programming languages, • Experienced in troubleshooting electrical control panels, • CNC troubleshooting experience, • Knowledge of NC Controllers: Siemens 840D or WINCC, • Experience using precision measurement equipment (i.e. Dial indicators, calipers, etc., • Willing to travel to customer sites (50-70% travel expected), • Must be able and willing to work weekends (OVERTIME), • Strong communication skills & ability to interact with teams, clients, and vendors, • Experience with aerial platforms and working at heights, • Ability to lift and move materials or equipment weighing up to approximately 40 lbs, • Provide electrical and controls engineering expertise in support of new equipment & system introductions, • Internal subject matter expert in control systems (Siemens PLC, HMI, Motion Control Systems), system integration, sensors, & electromechanical devices, • Apply knowledge of electronics, electrical circuits, mechanics, pneumatics, hydraulics, and programming, • Travel to customer sites for machine commissioning and troubleshooting support Powered by JazzHR wVJwjyb9aZ

You have a bachelor’s degree in engineering or a related field. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Serve as technical liaison with engineering regarding design concepts and specification requirements.

Job Description???? Senior Applications Engineer Great Plains Industries – Wichita, KS Full Time | Onsite | 10–15% Travel Join a Team Where Innovation Runs Deep At Great Plains Industries (GPI), engineering excellence and entrepreneurial spirit are part of our DNA. As a leader in flow meter technology and cloud‑connected fluid management solutions, we thrive on creating products that help move industries forward. Our FLOMEC Flow Meter & Instrumentation team is looking for a highly skilled, customer‑focused Senior Applications Engineer who enjoys solving complex challenges, influencing product design, and serving as the technical authority for advanced applications. If you’re energized by autonomy, technical depth, and meaningful customer impact, this is a great opportunity to grow with a company rooted in innovation and ready for the future. Job Summary The Senior Applications Engineer is the go‑to expert for flow meters and cloud‑connected measurement and fluid management solutions. Operating with a high degree of autonomy, this role leads complex customer applications, advanced integrations, and non-standard technical solutions. You will support strategic sales opportunities, collaborate on product direction, provide top-tier escalated support, and mentor technical team members—playing a key role in ensuring FLOMEC continues to deliver world‑class solutions. What You’ll Do • Analyze complex customer applications, define optimal technical solutions, and guide strategy during the sales process, • Serve as technical lead for high‑value OEM and enterprise accounts, • Provide expert consultation on system-level design, feasibility, and trade‑offs, • Troubleshoot flow meters and cloud-connected products via phone, email, video, and occasional on‑site visits, • Support warranty and return evaluations in partnership with internal teams, • Provide live, real-time support for installation, configuration, and system setup, • Act as the final escalation point for advanced hardware, software, and system integration issues, • Lead root‑cause analysis and collaborate with Engineering, Quality, and Product teams to drive long‑term solutions, • Mentor Product Technical Support team members and help develop their technical capabilities, • Lead or co‑facilitate advanced technical training for internal teams, distributors, and key customers, • Troubleshoot multi‑vendor systems involving PLCs, SCADA, FMS, and control loops, • Recommend non-standard or customized solutions that balance technical risk and business value, • Provide structured, actionable feedback to Product Management and Engineering for roadmap planning, • Represent GPI as a technical ambassador at trade shows, customer visits, and industry events, • Document activities using CRM, ERP, and collaboration tools, • Develop advanced application notes, diagrams, and technical guidance, • Identify documentation gaps and create materials to prevent recurring support issues, • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related technical field, • 7+ years in applications engineering, technical sales support, or systems engineering within industrial products, • Proven experience as a technical lead or escalation resource in customer‑facing environments, • Strong written and verbal communication skills, • Experience using CRM/ERP tools to document activities, • Mechanical and electrical aptitude with the ability to master GPI, GPRO, and FLOMEC applications, • Strong time‑management skills and ability to handle shifting priorities, • Self-motivated with a strong sense of ownership and follow‑throughPreferred Qualifications, • Master’s degree in Mechanical or Electrical Engineering, • Experience developing and delivering technical training to diverse audiencesJob RequirementsPhysical Requirements, • Ability to lift up to 20 lbs., • Ability to work at a computer and move throughout the factory floor for extended periods, • Ability to wear safety shoes, glasses, and related PPEWorking Conditions, • 10–15% travel to customer sites and trade shows, • Onsite role located at our Wichita, KS office, • Temperature‑controlled office environment with exposure to lab, manufacturing, warehouse, and customer environments, • Paid Time Off (PTO), • Paid Holidays, • Group Health Insurance (Shared Cost), • Group Dental Insurance, • Flexible Spending Accounts (FSA), • Company-Paid Life and AD&D Insurance, • Short- and Long-Term Disability, • 401(k), • Profit-Sharing Bonus Great Plains Industries (GPI) was built on the belief that engineering, ingenuity, and perseverance can create opportunities that last for generations. Founded by engineer Charlie Peer, GPI began as a small entrepreneurial venture that grew into a global leader with a strong family‑owned heritage. In 1968, Charlie launched his first business—Aerospace Systems and Components—by designing an air‑mixing valve for Learjet. As the aviation industry fluctuated, he recognized the stability and potential of the agriculture market. That insight led to the development of an evaporative air conditioning unit and a small transfer pump for combine cabs—products that became the foundation for the company’s future. Through years of innovation, engineering excellence, and building teams fueled by entrepreneurial spirit, Great Plains Industries has grown into the home of the GPI®, FLOMEC®, and GPRO® brands. Today, our products serve a wide range of Industrial, Commercial, and Retail applications—including fuel, agriculture, chemicals, manufacturing, construction, mining, and oil & gas. Our legacy of durability, superior engineering, and strong customer relationships reflects our Midwestern values and deep commitment to the people and industries we serve. In 2013, GPI expanded globally through the acquisition of Trimec Industries of Sydney, Australia—now Great Plains Industries Australia. As a leading manufacturer of flow meters and instrumentation, the addition of Trimec strengthened our global presence and upheld our tradition of reliability and world‑class engineering across Asia and Europe. Backed by the strength of our holding company, Great Plains Ventures, GPI is positioned for a long and exciting future. GPV continues to invest in manufacturing excellence, modernizing processes, developing strong teams, and pursuing strategic acquisitions that support long‑term growth. With two manufacturing and sales locations, we proudly support customers across the globe with localized expertise and a commitment to innovation, quality, and service.

Job Description JOB DESCRIPTION Job Title: Quality Process Engineer FLSA Status: Exempt Job Code: 11704 Date Created: 3/20/2017 Reports To: Quality Assurance Manager Date Revised: 10/17/2019 Department Name: 51 – Quality Assurance Date Reviewed: 10/17/2019 Location: Wichita POSITION SUMMARY Proactively leads and participates in identifying weaknesses in the current processes, recognizes potential areas for quality and efficiency improvements, and effectively works in conjunction with team members to drive the targeted improvements. Identifies and recommends continuous improvement activities while ensuring quality standards are met and are effectively communicated. KEY RESPONSIBILITIES/ESSENTIAL FUNCTIONS INCLUDE • Communicate with customers (internal and external) on quality-related concerns, quality system improvement and continuous improvement projects. Activities include negotiation of quality tolerances, establishing mutual action plans, and making presentations., • Create and maintain documentation as required, to include creation and revision of Control Plans, Flow Charts, Standard Work Sheets, gage studies, and other assigned documentation., • Assist with AS9100 Quality Management System:, • AS9100 internal audits – perform assigned and random audits., • Assist with customer audits and completing customer quality surveys., • Quality Documentation Manual (QDM) – manage new/revised document releases., • Training personnel on AS9100 standard., • Remain compliant with all quality policies, specifications, regulations and instructions and collaboratively educate and train others to ensure Integra-wide compliance., • Manage Corrective Action, Process Problem, and Preventive Action Programs:, • Determine owner(s) and work with them to identify root cause(s), help recommend action plans for preventive solution, drive implementation and report effectiveness., • Publish/distribute charts semi-weekly to show trending., • Identify opportunities for improvements and coordinate with other departments to implement process changes., • Recommend/drive process and/or tooling changes to reduce defect rates., • Provide summary reports for review by Staff., • Support Sales, Customer Service, and Production:, • Support other groups as needed through such items as interpretation of industry standards or customer requirement, contract review, research for required semiconductor specifications, quality or processing dispositions, etc., • Interpret customer specification to complete First Article Inspection Reports (FAIR’s) per the AS9102 SAE standard., • Collect data from various sources required to complete FAIR packets., • Investigate processing discrepancies, and provide input and/or recommendations based on findings., • Flexibility to perform other duties as assigned. JOB REQUIREMENTS INCLUDE Education: Bachelor of Science Degree in Information Management, Computer Science, Electronics Engineering, or related field required. Experience: AS9100 and/or ISO 9001, Six Sigma, Lean, or 5s experience preferred. Knowledge/Skills: • Effectively communicate with internal and external customers, both verbally and in writing, to achieve required results., • Self-motivated with excellent customer service, teambuilding, and interpersonal skills with the ability to defuse any situation., • Effectively and efficiently utilize Microsoft Office and other computer products and programs., • Anticipate and resolve complex, non-routine problems., • Ability to accurately track, enter, and maintain data., • Ability to effectively interface with employees, management team, and outside organizations., • Strong ability to interpret an extensive variety of technical instructions in written, oral, diagram, or schedule form while dealing with several abstract and concrete variables. SUPERVISORY RESPONSIBILITIES Total Number of Employees Directly Supervising: _0 _ Number of Subordinate Supervisors Reporting to Position: _0 _ This job description is intended to describe the general nature and level of work being performed. This is not intended to be an all-inclusive list of responsibilities, duties, skills required of employees so classified. In addition, this is not an employment contract and should not be construed or interpreted as creating an implied or expressed guarantee of continued employment. The employment relationship at Integra Technologies Inc is by mutual consent (Employment at Will). I have read the job description, as well as the physical requirements below, and understand the expectations. By signing below, I acknowledge that I am able to perform the essential functions and meet the minimum requirements. EMPLOYEE___________________________________________ Date ____________ PHYSICAL REQUIREMENTS INCLUDE In an average workday, employee must (check one frequency for each task): Task None Occasional Frequent Constant Stand ☐ ☐ ☒ ☐ Walk ☐ ☐ ☒ ☐ Sit ☐ ☐ ☒ ☐ Bend/stoop ☐ ☒ ☐ ☐ Climb ☒ ☐ ☐ ☐ Reach above shoulders ☐ ☒ ☐ ☐ Squat/crouch/kneel ☐ ☒ ☐ ☐ Push/pull ☒ ☐ ☐ ☐ Lift ☐ ☒ ☐ ☐ Usual amount ☒ <10 lbs ☐ 11-25 lbs ☐ 26-50 lbs ☐ 51+ lbs Carry ☐ ☒ ☐ ☐ Usual amount ☒ <10 lbs ☐ 11-25 lbs ☐ 26-50 lbs ☐51+ lbs Employee must use hands for repetitive action such as (please check all): Task Right Hand Left Hand Simple grasping ☒ Yes ☐ No ☒ Yes ☐ No Firm grasping ☒ Yes ☐ No ☒ Yes ☐ No Fine manipulation ☒ Yes ☐ No ☒ Yes ☐ No WORKING CONDITIONS INCLUDE In an average workday, employee is exposed to (check one frequency for each task): Task None Occasional Frequent Constant General shop conditions ☐ ☐ ☒ ☐ General office environment ☐ ☐ ☐ ☒ Humid, extreme hot/cold temps (non-weather) ☒ ☐ ☐ ☐ Outdoor weather conditions ☒ ☐ ☐ ☐ Fumes or airborne particles ☒ ☐ ☐ ☐ Fluorescent lights ☐ ☐ ☐ ☒ Moving, mechanical parts ☐ ☒ ☐ ☐ Toxic chemicals ☒ ☐ ☐ ☐ Loud noise intensity levels ☒ ☐ ☐ ☐ Risk of electrical shock ☒ ☐ ☐ ☐ Travel for job ☒ ☐ ☐ ☐

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Job Title: Advanced Electronics / Computer Field (ET/FC). The Advanced Electronics and Computer Field trains Sailors to maintain, operate, and repair some of t

Field/Office Liaison: You’ll be the point person for our field superintendents, ensuring they have the plans, materials, and support they need to succeed. This is a “roll-up-your-sleeves” role—we need someone who understands the field but is capable of managing the administrative and financi

SUMMARY : Recent Corporate Experience a MAJOR Plus! The A&P Technician repairs, troubleshoots, inspects, and performs maintenance on Customer aircraft Performs and documents all work performed per appropriate manuals and regulations as required DUTIES & RESPONSIBILITIES : Under minimal supervision,

The Project Engineer will be responsible for design on multiple projects, directing and/or leading other design professionals within their discipline, and working with other design disciplines internal and external to PEC to develop engineering solutions for PEC's Clients. Prepare and review enginee

Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data. Experience in programm

This is a general labor position and a perfect opportunity for anyone currently working as a construction or warehouse worker, laborers, restaurant and hospitality workers, cashiers, servers, line cooks and retail/customer service workers.

Complete engineering activities related to the procurement, build, and troubleshooting of circuit board designs and their interfaces. Complete Engineering Change Orders (ECOs) of new and existing designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and

Provide excellent customer service.

Complete engineering activities related to the procurement, build, and troubleshooting of circuit board designs and their interfaces. Complete Engineering Change Orders (ECOs) of new and existing designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and

Cintas Corporation - - Responsibilities: Inspect, test and perform system checks of sprinkler and fire protection systems; Identify code and system deficiencies; Prepare accurate and timely inspection reports; Adhere to fire codes and regulations; Available on-call when scheduled.

Complete engineering activities related to the procurement, build, and troubleshooting of circuit board designs and their interfaces. Complete Engineering Change Orders (ECOs) of new and existing designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and

Mayroad's mission is simple: create and foster long-term sustainable partnerships while ensuring the highest level of customer service and social responsibility are delivered to those whose lives we impact every day.

Work is performed in the field and in the shop. Bargaining Unit: Service Employee's International (SEIU) Employees within the department or division shall be given first consideration Posting may close at anytime.

Smithfield Foods - - Responsibilities: Maintain, troubleshoot and repair electrical and mechanical equipment in a food processing environment; Troubleshoot and diagnose equipment and systems for emergency repairs; Perform preventive maintenance routines and inspections; Read and interpret work orde