Trabajos field service engineer en Buffalo, New YorkCrear alertas

Job DescriptionDescription: Carrier Processing Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment and custom fluid solutions. Please visit us at to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are looking for a Project Engineer at our Tonawanda, NY location to support the Hebeler-Howard Marten (HHM) division. This full-time, exempt position is responsible for the coordination and completion of assigned engineering projects including analyzing customer requirements for equipment selection. Please visit to see the products and capabilities of HHM. Schedule Monday-Friday, 8 a.m.- 5 p.m., Some remote work is possible. Responsibilities • Aid in project administration from beginning to end., • Complete/support completion of cost estimates for new opportunities and sales efforts., • Analyze customer project requirements and communicate to engineering and production., • Direct and manage project development from beginning to end., • Single point of accountability to oversee, direct and manage deliverables of projects to customer from end to end of project., • Collaborate with vendors/suppliers on pricing, productivity ideas and material substitutions., • Approve vendor/supplier deviations., • Create Design Change Notice(s) (DCN) for customer driven scope changes to internal teams., • Track project scope changes and communicate costs to customers for review/approval., • Work with Syteline ERP System or other manufacturing software to create /load part numbers and material routings, update job information and pricing as requirements change., • Act as liaison between CPEG customers and all departments within CPEG., • Facilitate internal Design Review meeting with Engineering & Designers to review compliance with customer requirements., • Review & Share Product Improvement Trackers (PIT Sheets) to Engineering and Design Teams., • Facilitate and Schedule Project Kickoff meetings with internal teams., • Assesses cost effectiveness of products, projects or services., • Submit cost savings ideas (internal and externally)., • Meet with existing and potential customers., • Supporting the Customer Service team, where applicable., • Writing and follow-up of non-conformity reports & MRRs where applicable., • Represent the customer (point of customer) during design & fabrication of projects., • Support customer and 3rd party witness points / inspections at CPEG facilities.Requirements:, • Associates degree required in Engineering, project management or related field. Bachelor’s degree preferred., • Minimum two (2) to four (4) years’ verifiable experience in the field or in a related area., • Able to travel to Canada to facilitate work on projects manufactured in that location, • Design skills, familiarity with CAD, NX or Inventor, • Awareness of manufacturing methods and procedures., • Maintain a customer-focused perspective in all activities initiated to ensure that customer needs are successfully met., • Have excellent communication skills, both written and verbal., • Able to work cooperatively with other project team members as well as customers;, • Intermediate to advanced proficiency level in Microsoft Word, Excel and Outlook; as well as Adobe Acrobat and Windows., • Able to carry out detailed written or oral instructions., • Able to understand proper handling of all paperwork required in department, including reporting of time, • Able to manage a number of projects at one time with frequent interruptions, • Able to function and concentrate in a busy, noisy environment Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Compensation details: 65000-85000 Yearly Salary PI2e805ed58591-25405-38651049

General Manager & Principal Engineer Reports to Executive Management Full-time Salaried Management Buffalo, NY Overview RCM Thermal Kinetics, a division of RCM Technologies, provides process development, engineering, and supply of technologies and equipment for distillation, evaporation, molecular sieve adsorption, scrubbers, and a wide range of separations technologies. Thermal Kinetics supports multiple industries including renewable energy and chemicals extending through detailed design through commissioning, and startup of process plants, delivering both modular shop-built and field-installed systems. RCM contracts with suppliers and outsources its equipment fabrications to capable shops in various geographies. RCM is seeking to hire an experienced General Manager and Principal Engineer to lead its team in Amherst, NY. RCM Technologies acquired the Thermal Kinetics Engineering company in 2018 to expand its process and industrial engineering capabilities, particularly through technology, patents, and intellectual property. This position requires managing the existing OEM-driven business and transforming a mostly chemical process focused group into a full-service engineering firm. Current core capabilities stem from a portfolio of patents commercialized in the fuel ethanol and renewable energy industries. Core capabilities encompass most of the common separations unit operations as listed previously plus work in crystallization and a few chemical reaction systems. Position Summary The General Manager is responsible for the overall strategic direction, operational management, and financial performance of Thermal Kinetics business unit. This includes overseeing project delivery, managing client relationships, driving business development, and supervising engineering staff. The manager ensures projects are completed on time, within budget, and to the highest quality standards while also fostering a culture of innovation, safety, and continuous improvement. Key Responsibilities Business Transformation & Growth • Develop and execute transformation strategy: Create and implement a comprehensive plan to transition the firm from a primary focus on process engineering to offering a full range of engineering services, including mechanical, electrical, instrumentation, civil/structural, and project management capabilities., • Identify and develop new service lines:, • Identify new service opportunities within existing core business and clients., • Promote engineering services for local and regional industrial and chemical sectors. Operational & Financial Leadership Team Leadership & People Development • Strategic hiring and upskilling: Identify staffing and skill gaps necessary for the transition and develop a strategy to address them. This will involve coordinating with other engineering offices and recruiting experienced engineers from various disciplines and creating professional development programs to cross-train existing staff and build the firm's new capabilities., • Create and implement change management: Communicate the strategic vision and manage the organizational changes required for the transformation. Build a culture that embraces new challenges and fosters collaboration across different engineering disciplines., • Manage operational change: Establish the new internal processes, workflows, and procedures required for a full-service firm, such as integrating multi-disciplinary teams on projects and managing a broader scope of services.Business Development & Client Relations, • Represent the firm's new capabilities: Act as the external face of RCM Thermal Kinetics. Represent its expanded capabilities to clients, industry groups, and at conferences to generate interest and new business., • Manage strategic partnerships: Identify and secure partnerships with other firms or contractors to augment capabilities during the transition phase, ensuring the firm can deliver on its new "full-service" promises., • Marketing and Sales: With sales staff direct identification of new market opportunities, grow the client base, and expand the firm's service offerings., • Trade Events and Outreach: With key engineering staff and sales team represent the firm in professional organizations, with clients, and at industry events to build and maintain positive relationships., • Strategic Planning: Develop and execute short-term and long-term strategic business plans to achieve company goals for growth, revenue, and profitability., • Budget and Financial Management: In coordination with the CFO and his team prepare and oversee departmental budgets, manage financial forecasting, and review profit and loss reports., • Project Contracting: Supervise and assist as needed Projects Managers and the Proposal Manager to manage contracts, prepare proposals and bids, and negotiate agreements with clients and partners., • Provide mentorship, coaching, and professional development opportunities to team members to foster growth and improve performance., • Conduct performance reviews, set clear goals, manage resource allocation to maximize team efficiency, and promote professional development and cross-training to build a versatile engineering team., • Recruit, mentor, and cultivate a positive and collaborative work environment that encourages teamwork, high morale, and technical excellence. Technical & Quality Oversight • Maintain a deep understanding of the firm's technical services and industry trends to guide strategic decisions and drive innovation., • Direct and review engineering designs and changes, ensuring technical accuracy and soundness of methods used by staff., • Oversee quality assurance and quality control (QA/QC) processes for all project deliverables, ensuring the team's work complies with all relevant industry standards, regulations, and safety codes. Required Qualifications • Bachelor's degree in an engineering discipline (e.g., Civil, Mechanical, Electrical, or related). Master’s degree in engineering management or an MBA is preferred., • Minimum 15+ years of progressive experience in an engineering field, including 5-7 years in managerial or leadership roles with P&L responsibility., • Professional Engineering (P.E.) license is required, in addition to proven experience in managing engineering operations, project delivery, and resource allocation., • Demonstrated success in business unit leadership, client development, and organizational transformation., • Expert-level technical knowledge relevant to the firm's specific engineering services., • Proficiency with industry-standard software, such as computer-aided design (CAD) programs, project management software (e.g., MS Project)., • Strong analytical skills for evaluating technical information and complex problems. Skills and Competencies • Leadership: Demonstrated ability to motivate, develop, and direct technical teams., • Communication: Excellent written and oral communication skills to convey complex information to a variety of technical and non-technical audiences., • Problem-Solving: Exceptional critical thinking and decision-making skills to address project-related issues., • Strategic Thinking: Strong ability to build effective relationships with clients, team members, and senior management., • Organizational: Proven ability to manage multiple projects, budgets, and schedules simultaneously., • Client Development: Track record of building and expanding client relationships in industrial and chemical markets. RCM Technologies, Inc. RCM Technologies, Inc. (RCMT) is a premier single-source provider of engineering, business and technology solutions. Since 1971, RCMT's core strengths and expertise are a result of decades of delivering operational and engineering excellence across multiple industries such as Healthcare, Aerospace & Defense, Energy, Process & Industrial, Life Sciences, Data and Solutions. RCM Engineering Services division is a comprehensive Engineering/Architectural design and construction management firm providing clients with total solutions for their project needs. RCM provides the highest quality services in all engineering disciplines to utility, commercial, and industrial customers. At RCM, we believe the key to success is working with our clients to define the correct technical staff and resources necessary to assure each project phase can be executed within the client's guidelines. This requires technical personnel with a depth of experience in all phases of project execution. • Over 510+ Engineers and Technical Designers on our staff ready to support our clients with their routine and complex engineering needs., • Experienced, multi-discipline project teams offer the full range of comprehensive services necessary to successfully execute all aspects of power delivery, generation, commercial and industrial projects., • Proven project management skills and tools are applied to all tasks to achieve budget and schedule commitments., • Highly responsive, flexible, and cost-effective total solutions consistently delivering results that exceed our customers' expectations. Competitive Salary offered, along with benefits such as 401k, Stock Purchase Plan, Health, Dental and more. Salary and Title are commensurate with experience. Equal Opportunity Statement RCM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Disclaimer This job description is intended to describe the general nature and the level of the work being performed by the people assigned to this position. It is not intended to include every job duty and responsibility specific to the position. RCM reserves the right to amend and change responsibilities to meet business and organizational needs as necessary.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Energy who excels by transforming complex customer requirements into actionable, data-driven solutions across HVAC, controls, central plant optimization, and integrated energy systems. You lead projects from early concept through design, pricing, and performance validation-leveraging modeling, analytics, and real-world constructability insight to ensure every solution is technically sound, financially viable, and executable in the field. You collaborate seamlessly with Sales, Engineering, and Operations to protect margin, reduce risk, and deliver high-performance building outcomes. Through mentorship, strong communication, and technical leadership, you elevate both project delivery and overall team capability. What are we looking for • Associate degree required; Bachelor's preferred in engineering or related discipline., • 10+ years delivering building infrastructure, energy efficiency, or distributed energy resource projects., • Experience leading technical teams and managing cross-functional coordination., • Expert-level ability in energy modeling, building analytics, load studies, utility consumption analysis., • Deep understanding of HVAC systems, central plant optimization, and building automation controls., • Experience developing performance guarantees, feasibility studies, and detailed design documentation., • Familiarity with M&V practices and IPMVP protocols., • Skilled in evaluating engineering designs for constructability, cost, lifecycle value, and performance risk., • Proficiency with Microsoft Office; experience with industry software tools for modeling, analytics, and design., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Controls Engineer II is responsible for the development and implementation of industrial controls systems for RNG plants and related skid systems utilizing PLC's, SCADA, and HMI software to meet project and customer requirements. Familiarity with controls, electrical power systems, field devices, operations, network configurations, and industrial communications protocols are required. What would we like to see? • Bachelor's degree in electrical engineering or a related engineering field required. Additional experience will be considered in lieu of degree., • 5+ years related experience in control system design and related hardware specification and selection., • Experience with Rockwell and/or other similar PLC platforms., • Experience with Human Machine Interface (HMI) and/or SCADA systems, • AutoCad Electrical knowledge helpful, • General knowledge of rotating equipment such as pumps, compressors and motors., • Experience with AC/DC electrical systems and components such as VFD's, power supplies, relay logic, etc., • Experience leading troubleshooting, testing, and commissioning of automated machine systems, components, and electrical devices., • Detailed knowledge of NEC (National Electric Code) and other international electrical codes such as IEC and CSA., • Ability to communicate clearly and professionally with clients, suppliers, and internal team on a regular basis, both verbally and in writing., • Must be good at multi-tasking and running multiple projects in different stages of completion at once., • High organizational skills are required to maintain and track all project correspondence and documentation. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy team. LaBella’s Energy team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • Ensure compliance with applicable codes, standards, and utility requirements Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain accurate records of project details, including design documents, progress reports, and budget information., • Participate in project planning meetings, coordinating tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure compliance with safety codes, design standards, and regulatory requirements., • Conduct field inspections and prepare detailed bridge and culvert inspection reports., • Provide technical support during construction: respond to RFIs, conduct site visits, and ensure design integrity., • Collaborate with internal teams, subconsultants, regulatory agencies, and clients to ensure seamless project delivery. Your Impact Matters, Your Career Thrives. Work on engaging bridge engineering design projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Health insurance-Medical, Dental & Vision, • 401(k) plan, • Company-paid life and disability insurance, • Hybrid work schedule, • Generous PTO, • Strong work-life balance, • Shareholders program, • A comprehensive range of benefit options to support your well-being, financial security, and peace of mind. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) or ability to obtain it., • Experience with MicroStation, STAAD, Bridge Design Software programs preferred., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job Description We are currently seeking Senior Gas Project Engineer(s) in a hybrid setting located somewhere in Central NY, Western NY, or Northwestern PA. The ideal candidate has at least a Bachelor’s degree in Civil or Mechanical Engineering (or other engineering field with the required experience). The successful candidate will act in a consultant role for our existing utility clients. Types of projects include (but are not limited to) main and service replacements, system improvements, pressure upgrades, new business main extensions, highway improvements, regulator station and facility design, Gate Station design, odorization, pre-heat, valve replacements, Mega Rule compliance activities, cathodic protection design, critical crossing and horizontal directional drilling design, odorization and pipe conditioning, Integrity Projects, Stress Analyses using FEM software, and more. Duties • Conduct preliminary field work which would include carrying approximately 10 lbs. throughout the work day. Expected amount of field work would be approximately 5-10% of annual work load, but may vary based on client needs and project assignments., • Coordinate with all project stakeholders and act in the interest of our clients to support their project goals., • Production of quality basemap and construction drawings for client, municipal, and regulatory agency review using AutoCAD., • Including details, BOM, Material Specifications, O&M manual development, management of inter-disciplinary projects, and more., • Development of energization and de-energization procedures., • Contractor and construction cost estimation., • Alternative Analyses and detailed comparisons including Risk Assessment, • Code and Compliance Reviews, Gap Analyses, O&M and Construction standard audits and modification., • DIMP and/or TIMP plan development and/or audits and/or improvements., • Data entry into SAP Work Management System to support your project work in our clients’ WMS’s., • Apply for and obtain municipal highway permits and other right-of-way permits (e.g. NYSDOT, railroad, Thruway Authority, Canal Corporation, etc.), • Assist with Procurement activities and evaluate bid submissions, • Participate in pre-construction and/or pre-bid meetings, site visits to meet with contractors and owners, etc., • Coordinate with landowners to obtain right-of-way / easement when required., • Create as-built records from inspector’s field notes., • Supervise, mentor, and train junior staff. Act as a role model. Set and monitor goals, objectives, and progress., • This is a Senior Level position, and you must have proven / demonstrated the ability to perform the duties of this role through previous employment., • Bachelor’s or master's degree in civil or mechanical engineering (or other closely related field)., • Minimum of 10 years of related experience for Natural Gas Operator or consultant in Natural Gas industry (Transmission and Distribution with FERC familiarity preferred), • Strong verbal and written communication skills., • Presents and conducts themselves in a professional manner., • Able to pace themselves and work within defined project budgets., • Ability to balance multiple projects and assignments and prioritize their individual workload., • Need to possess a valid driver's license with a safe driving history required., • Excellent organizational skills., • Willingness to travel to project sites in Northwestern PA, Central NY, and Western NY., • Ability to carry 10 lbs. throughout the workday sometimes through difficult terrain such as forests, agriculture fields, etc., • Preferred / Bonus Experience:, • Compressed Natural Gas, • Hydrogen transportation and/or blending., • Professional Engineering license or GTI Competent Engineer Certification Salary Range: $75,000 - $125,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: A Bridge Engineer– Civil/Structural Full-Time | Hybrid Buffalo, NY Launch Your Career & Structural Engineering | Design the Bridges of Tomorrow Are you a civil or structural engineering graduate or early-career bridge engineer looking to gain hands-on experience in infrastructure design? Fisher Associates is seeking a Bridge Engineer I or II (Civil/Structural) with 0–5 years of experience to join our collaborative Bridge and Transportation team. In this hybrid role you’ll work on impactful bridge design and transportation infrastructure projects that improve safety and mobility in the communities we serve. This is an exciting opportunity to launch your engineering career with mentorship, professional development, and a clear path to PE licensure. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Assist with field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0-5 years of transportation experience, structures/bridge design engineering experience preferred, • EIT preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT) preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to take ownership of projects, prioritize effectively, and thrive in a dynamic, fast-paced environment., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Precast Engineer - Civil/Structural Join Our Team as a Precast Engineer – Shape the Future of Concrete Design & Innovation! Fisher Associates is hiring a full-time Precast Engineer to design and engineer high-quality precast concrete components for a variety of civil and structural engineering projects. You’ll ensure every element meets structural codes, safety standards, and project specs—delivering safe, reliable, and cost-effective solutions. Collaborate with a skilled, supportive team and grow your engineering career in a flexible, impact-driven environment. Apply now and engineer the future with us! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials., • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. What We Offer Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0 - 5 years minimum of transportation/structural experience preferred, • Concrete design engineering course or design experience preferred, • EIT or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description We are currently seeking qualified candidates to fill a Junior Highway Engineer position in our Buffalo, NY office. Duties: • Work as part of a team in all facets of transportation engineering including roadway, trail, and pedestrian type projects., • Tasks would include: design of horizontal and vertical alignments, drainage systems, signing and pavement markings, safety assessments, erosion and sediment control, development of maintenance and protection of traffic schemes, and preparation of construction related documents., • Other responsibilities may include: report preparation, field reconnaissance and inspection, project rendering., • Bachelor’s degree in Civil Engineering (with concentration in Transportation) from an ABET Accredited College, • 0 to 5 years of experience, • Preferably have their EIT Certificate (or the ability to obtain within 12 months) - PE License is a plus, • Strong communication and organizational skills, • Experience using MicroStation and/or AutoCAD is a plus, • Proficiency in Microsoft Office applications, such as Word & Excel, • Experience with Hydrologic and Hydraulic modeling software a plus, • Experience with PennDOT and Pennsylvania Turnpike Commission projects is a plus., • Desire to work in a team environment Salary Range: $60,000 - $70,000 Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Controls Engineer is responsible for the implementation of industrial controls systems for RNG plants and related skid systems utilizing PLC's, SCADA and HMI software to meet project and customer requirements. This includes both hardware selection and implementation and related programming. Familiarity with controls, electrical power systems, field devices, operations, network configurations, and industrial communications protocols are required. What are we looking for • Bachelors degree in electrical engineering or a related engineering field required. Additional experience will be considered in lieu of degree., • 1 year of related experience in control system design., • General knowledge of rotating equipment such as pumps, compressors and motors., • General knowledge of AC/DC electrical systems and components such as VFD's, power supplies, relay logic, etc., • Experience troubleshooting automated machine systems, components, and electrical devices using test equipment. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description What's in it for you? Hospice offers a Robust Total Rewards Package Employer 401k contribution regardless of employee participation, and match on employee contributions there after Health Insurance with vision component copayment plan, or high deductible plan (FT status) HSA with high deductible health plan twice annual Employer contribution (FT status) Dental Insurance (FT status) Flexible Spending Account (FT status) Paid Time Off PTO & NYS Sick Leave Tuition Assistance Program And Much More! This is an on-site role - Monday-Friday, 8am-4pm Summary: This position is an innovative and hands-on technical role responsible for the planning, deployment, implementation, and administration of organization-wide systems, servers, and technical processes. The Systems Engineer works collaboratively both with IT and Cross functional teams to support reliable, secure, and compliant IT operations that enable clinical and administrative staff. The role evaluates and recommends infrastructure solutions, projects, and priorities while ensuring alignment with HIPAA, and corporate security standards. Essential Duties and Responsibilities: Plans and coordinates new systems and platforms' deployment processes, and schedules sequence. Ensures software and hardware systems are configured, fully deployed, and functioning as intended. Responsible for analysis, acquisition, implementation, installation, and maintenance of new enterprise solutions. (Servers, Storage, Virtualization) Documents processes, procedures, and system configurations in alignment with IT governance practices. Provides Tier II/III escalation support for complex technical issues and assists the help desk as needed. Acts as a technical liaison with external vendors and service providers for system-related projects or escalations. Manages the design, and implementation of mobile device management system (MDM) policies, profiles, applications, and configurations, including Security and Compliance, supporting various clinical, corporate, and executive Android and iOS-based smartphones and tablets. Develops, implements, and maintains security baselines, patch management, and vulnerability remediation practices. Design and implement a process for OS deployment and maintenance. Manages company-wide application update repository for all organization workstations. Collaborate with the team to maintain IT Systems including but not limited to tablets, laptops, desktops, servers, and other hardware devices including servers, AV equipment, phones, etc. Acts as a liaison on behalf of the organization with external technology vendors. Demonstrates the ability to apply technology in an enterprise environment. Exhibits strong communication skills within the IT Department and with other departments and at all levels. Non-Essential Duties and Responsibilities: Performs other duties as required. Qualifications: Education/Certification Bachelor's degree in computer science (or related field) preferred Valid Driver's License, free of serious violations, and vehicle required for use when on duty. ITIL Foundation Certification (preferred). MCSA/MCSE (preferred) Security+ (preferred) Experience 3-5 years of experience as a Systems Engineer, Systems Administrator, or in a similar infrastructure role. Experience in a healthcare IT or regulated environment preferred. 3-5 years of administrative experience working with a mobile device management (MDM) platform. 3-5 years' experience with an enterprise-wide imaging solution; Microsoft SCCM or Microsoft Deployment Toolkit (MDT) 3+ years of experience managing Windows Server environments and Active Directory, Entra. Hands-on experience with Microsoft 365 and Azure cloud administration. Experience with virtualization (VMware/Hyper-V), backup/recovery (Veeam), and disaster recovery planning. Familiarity with IT security practices, identity management, and compliance frameworks Experience with Managing O365 e-mail and Microsoft Exchange Hybrid environments Values/Success Factors: Excellence - Demonstrates the highest quality of work. Compassion - Treats internal and external customers with empathy and respect. Service - Attends to the needs and best interests of internal and external customers. Teamwork - Supports effective collaboration and communication in achieving common goals. Innovation - Offers suggestions for improvement and accepts creative ideas and concepts. Integrity - Maintains ethical, moral, and operational standards and adheres to corporate compliance standards as defined in the Corporate Compliance Plan. Skills/Abilities Possess critical thinking skills, proficiency in organizing resources and establishing priorities, and strong interpersonal and communication skills. Ability to prioritize and manage multiple projects while minimizing downtime for clinical operations Excellent interpersonal communication skills and written communication skills. Excellent analytical and decision-making skills. Ability to work collaboratively in a team environment and support mission-driven care delivery. Must be able to handle diverse work problems daily with the ability to resolve problems and handle conflict as part of a team. Knowledge and understanding of TCP/IP, DNS, DHCP, firewalls, virtualization, Active Directory, and Group Policy Provides timely, appropriate, and knowledgeable responses to partners; creates a stress-free atmosphere for users to ask questions and share concerns. Friendly enthusiastic self-starter and effective collaborator. Understanding of IT security practices, patch management, and vulnerability mitigation. Commitment to confidentiality, integrity, and compliance with corporate standards. Knowledge of proper change management process and project management. Physical Demands: Typical office setting. May experience eye and repetitive motion strain from work on the computer. Position requires sitting, standing, bending, and reaching along with a normal range of hearing and vision. Must be able to operate standard office equipment such as computers, mobile devices, phones, copiers, scanners, printers, or related items. Environmental Conditions: May be called upon to work beyond the normal workday. Job Posted by ApplicantPro

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our Buffalo, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently hiring a Structural Engineer to join our Building Engineering Division in our Buffalo, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, large commercial, residential and other unique projects. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Perform complex design calculations for analysis and design of new and existing structural systems., • Prepare documents and reports from concept design through advanced technical design documentation., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Review shop drawings, respond to RFI’s and perform field observations during CA phase. Salary Range: $65,000 - $100,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor of Science degree in Civil or Structural Engineering is required. Coursework in building systems engineering required., • Master of Science degree in Structural Engineering is preferred., • 3 years minimum experience with concrete, steel, masonry, and/or wood design is required., • Working knowledge of AutoCAD, Revit and structural engineering design software (RISA, SAP, and/or TSD) is required., • E.I.T. accreditation preferred., • Excellent verbal and written communication skills. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Buffalo, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Maintain client relationships. Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Whether you're already licensed or on the path to PE certification, you'll gain mentorship and work on meaningful bridge and transportation infrastructure projects that enhance safety, sustainability, and connectivity in the communities we serve. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience, structures/bridge design engineering experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Highway Design Engineer – Civil/Structural | Shape the Future of Transportation Ready to build the highways of tomorrow? Are you a skilled Highway Design Engineer with a passion for designing safe, efficient, and innovative transportation systems? Join our dynamic team of civil and structural engineering professionals where your expertise in roadway design, highway infrastructure, and transportation engineering will directly impact the communities we serve. In this role, you’ll play a key part in designing highways, roadways, intersections, and other critical transportation infrastructure projects. You’ll collaborate with multidisciplinary teams to solve complex engineering challenges and ensure all designs meet industry standards, environmental requirements, and safety regulations. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrated ability to efficiently manage highway design projects, including drainage, alignments, and related tasks., • Prepare and maintain comprehensive design plans, detailed specifications, technical reports, and accurate cost estimates., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Proactively support project managers with schedules, documentation, and presentations. Your Impact Matters, Your Career Thrives. Work on engaging Highway Design Engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Highway Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience Highway Design Engineering experience preferred, • EIT required, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD, OpenRoads, and Bridge Design Software preferred., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description Are you passionate about healthcare building engineering systems? We are seeking a Senior Electrical Engineer with a strong background in healthcare building projects to join our Buffalo, NY Office. In this role, you will collaborate with regional leaders and engineering teams to develop concepts, strategies, designs, drawings, specifications, and reports from project inception through construction. You must be able to work independently and as part of multi-discipline teams to drive successful client outcomes in the built environment. This is a unique opportunity to lead and build a team, playing a key role in shaping the future of our healthcare engineering sector. At LaBella, our architects and engineers are problem-solvers, innovators, and change-makers, committed to addressing local and regional challenges, preserving natural resources, and planning for a sustainable future. Duties may include: Project Development & Client Engagement • Scope projects and develop proposals., • Build and maintain relationships with existing and prospective clients., • Function as the lead electrical engineer on multi-discipline projects from proposal through construction., • Serve as a project manager for building engineering-led projects. Electrical Engineering & Design • Develop electrical designs including single-line diagrams, electrical room layouts, panel sizing, lighting, and building systems., • Perform load calculations for generators, transformers, switchgear, MCCs, panel boards, VFDs, feeders, and branch circuits., • Prepare electrical design drawings, specifications, and reports., • Research and present coordinated design solutions., • Conduct building condition assessments and generate reports., • Ensure compliance with national, state, and local regulations, including FGI guidelines, DOH requirements, and CON submissions. Team Collaboration & Leadership • Work closely with mechanical, civil, structural engineers, and architects., • Mentor and train junior engineers., • Delegate and oversee project tasks to ensure successful completion., • Engage with owners, contractors, permitting authorities, and industry organizations. Technical Expertise & Innovation • Serve as Engineer-of-Record and internal technical expert on assigned projects., • Maintain up-to-date knowledge of industry technologies, trends, and best practices., • Passion for healthcare building systems and recognized expertise in the field., • Bachelor’s or Associate’s degree in Electrical Engineering, Engineering Technology, or a related field., • PE license (NY or OH) strongly preferred., • Minimum 10 years of experience in an A/E consulting firm., • Expertise in power distribution, lighting, fire alarm, security systems, and telecommunications design., • Experience with AutoCAD and Revit is a plus., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis)., • Understanding of Arc-Flash Evaluation and electrical safety codes., • Strong writing, organizational, and communication skills., • Attention to detail—because in this role, every detail matters!, • Ability to manage multiple projects simultaneously. Salary Range: $125,000 - $175,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Opportunity to lead and grow a team in a respected firm., • Collaborative, mission-driven culture focused on innovation and sustainability., • Work on impactful projects that shape healthcare environments. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Senior Structural Engineer (Hybrid) Location Options: Williamsville, NY | Rochester, NY | Albany, NY | Atlanta, GA | Buffalo, NY | Upper Arlington, OH | Eau Claire, WI | Meriden, CT | Minneapolis, MN | Hauppauge, NY | Syracuse, NY | Richmond, VA | Alexandria, VA | Voorheesville, NY (Preference for New York offices; must be within commuting distance to an office. This is a hybrid role, not remote.) About the Company Our client is an innovative architecture, engineering, energy efficiency, and construction management firm that partners with both private and public entities to deliver comprehensive facility and infrastructure solutions. Founded in 1940 as a small civil engineering and surveying firm in Western New York, the company has grown into a full-service organization with professional engineers across all disciplines, as well as architects, landscape architects, construction managers, planners, and interior designers — all united by a shared commitment to collaboration, quality, and integrity. Why Join the Team • Amazing company culture and collaborative work environment, • Competitive salary and performance-based growth, • Comprehensive benefits package: Medical, Dental, Vision, 401(k) with company match, • Generous PTO and 9 paid holidays, • HSA and FSA options, • Career advancement opportunities through structured Career Development Plans, • Tuition reimbursement and professional development support, • Work-life balance focus and wellness programs Position Overview We are seeking an experienced and licensed Senior Structural Engineer to join our growing multidisciplinary team. In this role, you will lead the design and analysis of high-profile structural projects, collaborating with architects, engineers, and construction professionals across multiple disciplines. This position offers the opportunity to make a lasting impact on the built environment while contributing to the success of major company programs. Key Responsibilities • Lead the analysis, design, and computer modeling of structural systems., • Coordinate with architectural, mechanical, electrical, and civil disciplines to ensure project integration and success., • Prepare detailed plans, drawings, and technical specifications., • Conduct construction administration activities including shop drawing review and field observation., • Interpret, organize, and coordinate complex assignments independently., • Explore innovative engineering solutions and develop novel technical concepts., • Serve as a technical liaison within and outside the organization., • Manage projects from concept through construction, ensuring compliance with structural codes and standards., • Conduct facility assessments, draft technical reports, and prepare documentation., • Mentor junior engineers, interns, and CAD technicians., • Participate in client, project, and team meetings., • Occasional travel to local and non-local project sites as required. Qualifications • Bachelor’s Degree in Structural or Civil Engineering (focus in Structural Engineering required)., • 10–20 years of progressive experience in structural engineering., • Professional Engineer (PE) license required; Structural Engineer (SE) license preferred or required., • Proficiency in structural engineering software (Bentley RAM products) and 3D modeling tools (Revit, AutoCAD)., • Strong technical and problem-solving skills with proficiency in Microsoft Excel and BlueBeam., • Excellent communication, time management, and technical writing skills., • Deep understanding of structural codes and standards (ASCE 7, AISC 360, ACI 318, etc.)., • Experience designing with a wide range of materials including steel, concrete, masonry, and wood.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Electrical who excels by transforming complex electrical requirements into safe, reliable, and integrated building infrastructure solutions. You lead projects from conceptual design through commissioning, using deep technical expertise, system analysis, and real-world constructability insight to ensure every electrical system is code-compliant, cost-effective, and optimized for long-term performance. You thrive at bridging design and field execution-coordinating seamlessly with mechanical, controls, and low-voltage teams to deliver fully integrated building solutions that support smarter, more efficient operations. Through technical leadership, cross-functional collaboration, and mentoring of engineering staff, you elevate project quality, reduce risk, and strengthen Stark Tech's reputation for delivering high-performing electrical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in electrical building infrastructure, power distribution, or energy/efficiency-driven electrical design., • Proven experience leading projects and managing engineering or cross-functional teams., • Expert knowledge of NEC, NFPA, IEEE, and local AHJ electrical requirements., • Strong understanding of service entrance design, switchgear, grounding, lighting, motor control, and distribution systems., • Experience performing power system studies (short circuit, arc-flash, coordination, voltage drop, load analysis)., • Skilled in producing Basis of Design documents, one-lines, riser diagrams, specifications, and construction documentation., • Ability to coordinate electrical designs with mechanical, structural, controls, and IT teams for fully integrated solutions., • Experience supporting commissioning, functional testing, performance verification, and owner turnover processes., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Senior Controls Engineer is responsible for project leadership in the conception, development, and implementation of industrial controls systems for RNG plants and related skid systems utilizing PLC's, SCADA, and HMI software to meet project and customer requirements. This includes both hardware selection and implementation and related programming. We are looking for an individual with in-depth familiarity and experience with controls, electrical power systems, field devices, operations, network configurations, and industrial communications protocols. What are we looking for • Bachelor's degree in electrical engineering or a related field required. Additional experience will be considered in lieu of degree., • 10+ years related experience in leading control system design and related hardware specification and selection., • In depth knowledge of Rockwell and/or other similar PLC platforms., • General knowledge of rotating equipment such as pumps, compressors, and motors., • Extensive knowledge of AC/DC electrical systems and components such as VFD's, power supplies, relay logic, etc., • Extensive experience leading troubleshooting, testing, and commissioning of automated machine systems, components, and electrical devices., • Detailed knowledge of NEC (National Electric Code) and other international electrical codes such as IEC and CSA., • Ability to communicate clearly and professionally with clients, suppliers, and internal team on a regular basis, both verbally and in writing., • Must be good at multi-tasking and running multiple projects in different stages of completion at once., • High organizational skills are required to maintain and track all project correspondence and documentation., • Demonstrated experience and ability to coach, mentor, and train junior engineers and colleagues. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Role Overview: The Mechanical Design Engineer Manager is responsible for overseeing the day-to-day operations of the mechanical design team. This position will directly interface with other leadership members of the company, and will serve as the subject matter expert to their team in the mechanical design field. Further, this role will be expected to assist and participate in the design process of Company projects, which are large metal enclosures. Job Responsibilities: • Directly oversee the Mechanical Design Engineers., • Provide managerial insight to the Mechanical Design team, serving as the subject matter expert on the field and company projects., • Manage the Mechanical Design Engineers workload and project schedules., • Participate in company leadership meetings as needed to provide updates and insight on the Mechanical Design team., • Associates degree or equivalent from a vocational training program or technical school, • At least 6 years’ experience as a Mechanical Design Engineer with specialty in structural steel applications, 3 of which are in a managerial capacity., • Familiar with ISO shipping container construction methods., • Familiar with prefabricated and modular construction methods., • Familiar with sheet metal, metal framing and weldments., • Candidate should have good oral and written communication, interpersonal, problem solving and analytical skills., • Proficiency with AutoCAD and BIM/Solid Works is required., • Experience with FEA analysis, weldment design and structural analysis, • Must have a customer service perspective with the ability to communicate effectively with all levels of staff and clients., • The successful candidate should be self-sufficient, have strong computer skills, and be very detail oriented., • Must be proficient in MS Office products including Word, Excel, Outlook.

Job Description We are currently hiring an Electrical Engineer in our Building Engineering Division – Energy Infrastructure team in our Buffalo, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses and design. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Electrical Engineer will work with our team in a lead role on a variety of decarbonization/electrification/renewable energy projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Design building electrical systems, • Design photovoltaic, battery storage systems, and grid interconnection, • Field investigations to document existing conditions, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 2-4 years of relevant experience, • Bachelor’s degree in Electrical Engineering is preferred, • Well-rounded experience in building electrical system and/or distributed energy system design, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $70,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently seeking an Environmental Scientist, Geologist or Engineer to join our team in our Buffalo, NY office. The Environmental Scientist, Geologist or Engineer will perform various tasks including field work, soil and groundwater sampling, drilling supervision, report writing, and support project managers on various environmental projects in the northeastern United States. Duties • Soil and Groundwater Sampling, • Field Monitoring of various media, • Field Activities Supervision, • Drilling Supervision, • Data Tabulation, • 0-5 Years Experience, • BS in Geology, Environmental Science, Engineering or closely related field, • MS Office Suite, • Strong communication skills, critical thinking, creativity, • Field sampling experience, • 40 Hour OSHA Hazwoper a plus Salary Range: $24-$26 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description LaBella is currently hiring for a Senior Structural Engineer in our Buffalo, NY office. The Structures Discipline provides structural engineering services with emphasis on new design, repair and rehabilitation of constructed works, as well as investigation and performance evaluation. Individual must be able to work independently, as well as part of multi-discipline teams. Duties • Serves as a Lead Engineer who supervises a team of structural engineers, designers and technicians in production of structural construction documents including drawings, specifications, bidding and construction administration for large complex projects including calculation and document reviews., • Develops cost effective system layouts as well as performing calculations and coordination with other disciplines., • Performs site visits for documentation and cost estimating of existing systems and building conditions., • Prepares technical specifications., • Reviews and evaluates shop drawings and product submittals., • Visits construction sites to inspect work in progress or completed., • Maintains and manages budgets for projects including hours and resources., • Maintains client relationships, • Prepares Engineering Reports., • Completes complex and specialty types of design., • Stays abreast of technical advancements in respective field and disseminates information to others., • Minimum of 15 years of experience working in the consulting engineering industry., • Strong writing and communication skills., • Demonstrated ability to meet deadlines., • BS in Civil Engineering is required., • A New York State PE license is required., • Revit Experience is a plus., • Project history using computer analysis software experience is essential. Salary Range: $100,000 - $150,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Ferguson Electric’s Electrical Engineer II is a mid-level position for engineers focusing on becoming self-sufficient on design and engineering tasks. This position will contribute to the electrical system design, engineering, commissioning and construction efforts for commercial and industrial projects, including healthcare, education, research, commercial facilities, and utilities. This role involves supporting project design teams, developing innovative electrical solutions, and ensuring compliance with applicable codes and standards. The Electrical Engineer II role will provide guidance to junior staff as needed, assist in managing project deliverables, and support the company’s commitment to quality, safety, and client satisfaction while upholding Ferguson Electric’s core values. RESPONSIBILITIES • Electrical Systems Design:, • Design of electrical systems, including power distribution, lighting, fire alarm, and communication systems, for commercial and industrial projects., • Support the development of project design goals, specifications, and strategies to meet client requirements and project objectives., • Participate in quality control reviews of engineering documents to learn about accuracy and compliance with project requirements., • Help ensure designs comply with applicable codes (e.g., NFPA, IEEE) and industry standards., • Electrical Systems Analysis and Field Support:, • Help specify electrical equipment, components, and materials, ensuring compatibility with project needs and budgets under supervision., • Perform engineering studies, such as load analysis, short-circuit, and coordination and arc flash, using tools like SKM or Easypower with minimal supervision., • Review of submittals, shop drawings, and other construction documents to ensure they are meeting the project requirements., • Develop relay, transformer, breaker and battery testing plans and reports with minimal experience., • Develop relay programs with minimal guidance., • Support service technicians with troubleshooting customer electrical system problems under the guidance of higher-level engineers., • Project Leadership:, • Support the coordination of electrical engineering aspects of projects, helping adhere to budgets, schedules, and quality standards., • Participate in project team and client meetings to align on project scope, progress, and deliverables., • Assist in the preparation of construction documents, including drawings and specifications., • Site Engagement:, • Participate in job site visits to observe existing conditions, monitor construction progress, and learn about compliance with design specifications., • Attend construction meetings and provide basic technical support to field teams and subcontractors as needed., • Perform physical walk-throughs of sites under supervision to assess conditions and resolve issues., • Process Improvement:, • Contribute to strategies to improve design quality, coordination, and efficiency in production efforts., • Support the incorporation of renewable and sustainable design practices where applicable to enhance project outcomes. Requirements: ABOUT YOUR QUALIFICATIONS • Education and Experience:, • Bachelor’s degree in Electrical Engineering or Architectural Engineering from an ABET-accredited program required and preferred with electrical systems focus., • 4-6 years of experience in electrical engineering, with a focus on commercial or industrial projects., • Engineer-in-Training (EIT) certification is required or additional 5 years of experience directly related to the job responsibilities., • Technical Skills:, • Strong proficiency with Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting., • Proficiency in drawing software (e.g. Revit and AutoCAD) and electrical analysis software (e.g., SKM) is preferred., • Good understanding of designing power distribution, lighting, and communication systems per NEC, IEEE and other relevant codes is preferred., • Ability to read and understand construction drawings and specifications., • Basic understanding and knowledge of electrical system installation methods and standards., • Exposure to renewable energy systems or sustainable design practices is a plus., • Soft Skills:, • Strong problem-solving skills and ability to work on multiple tasks., • Good leadership and mentorship skills to contribute to team efforts., • Good communication and interpersonal skills to collaborate with clients, contractors, and internal teams., • Organizational and time management skills to handle tasks and meet deadlines., • Ability to adapt to an adjusted work schedule, including occasional overtime or evening/weekend hours, to meet project demands., • Willingness to accept constructive feedback and make changes as necessary to improve job performance., • Willingness to learn and develop skills in various engineering tasks, software, and equipment., • Other Requirements:, • Ability to conduct physical site walk-throughs and work in various environmental conditions., • Participate in in-house and manufacturer training to enhance skills.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Mechanical who excels by transforming mechanical system requirements into high-performance, energy-efficient, and fully integrated building solutions. You lead projects from conceptual design through construction support and commissioning, applying deep technical expertise in HVAC, hydronics, central plant systems, and air distribution to ensure every design is safe, code-compliant, and optimized for long-term reliability. You thrive at bridging early pre-construction solutioning with detailed engineering and field execution-collaborating across mechanical, electrical, structural, controls, and architectural teams to deliver systems that perform as designed in the real world. Through technical leadership, clear communication, and mentorship of engineering and design staff, you elevate project quality, improve constructability, reduce risk, and strengthen Stark Tech's reputation for delivering high-performance mechanical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in mechanical building systems or energy-driven infrastructure projects., • Proven experience leading projects and managing engineering or cross-functional teams., • Expertise in HVAC system design, load calculations, equipment selection, air and fluid distribution, and central plant systems., • Experience defining sequences of operation and integrating mechanical systems with BAS platforms., • Proven ability to conduct system retrofits, upgrades, and performance optimization analyses., • Thorough knowledge of applicable codes, safety standards, and environmental/regulatory considerations., • Skilled in creating Basis of Design documents, narratives, specifications, and construction documentation., • Experience coordinating mechanical designs with electrical, structural, controls, and architectural teams., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure designs adhere to state and local standards, regulations and safety codes., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design, • Provide technical support during construction, respond to RFIs and attend site visits., • Provide technical support during construction, respond to RFIs and attend site visits., • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Project Engineer • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job DescriptionJob Title: Data Solutions Architect Location: Buffalo, NY Hire Type: ContingentPay Range: $40.92 - $68.19/hourWork Type: Full-timeWork Model: RemoteWork Schedule: Monday – Friday, 9am – 5pm Recruiter Contact: Brian Fesmire, & Scope:Positional OverviewThe Imagine Group is recruiting for a Data Solutions Architect, on behalf of our client, a leading financial institution recognized for its strong community presence, customer-focused approach, and commitment to helping individuals and businesses succeed. in Buffalo, NY. In this role, you will be responsible for designing and delivering enterprise-grade data platforms and solutions that enable advanced analytics and business intelligence. This role requires deep expertise in data engineering, cloud-native architecture, and modern data technologies. The architect will work closely with engineering, product, and compliance teams to build secure, scalable, and regulatory-compliant data solutions. All solutions must align with the principles, standards, and reference architecture established by the Enterprise Architecture function, ensuring consistency, interoperability, and strategic fit across the organization.Role & Responsibility:Tasks That Will Lead to Your Success • Solution Architecture: Architect and deliver cloud-based data platforms (e.g., Azure Data Lake) and scalable data pipelines using technologies such as Databricks, Kafka, etc., • ETL/ELT Frameworks: Develop and implement ETL/ELT frameworks for ingesting, transforming, and integrating data from diverse sources, including legacy financial systems, SaaS platforms, and real-time data streams., • Data Platform Deployment: Design and oversee deployment of data warehouses, lakehouses, and analytics sandboxes to support business intelligence, machine learning, and reporting needs inclusive of Power BI and Snowflake., • Data Governance: Define and enforce data governance, metadata management, and data quality standards in accordance with Enterprise Architecture guidance and regulatory requirements., • Enterprise Architecture Collaboration: Collaborate with Enterprise Architecture to ensure all solutions adhere to architectural standards, reference models, and technology roadmaps. Vendor & Partner Engagement: Collaborate with external technology providers and service partners to ensure solutions meet enterprise standards for performance, cost-effectiveness, and agility in a highly regulated environment., • Technology Evaluation: Lead technical evaluations and proof-of-concept projects for emerging data technologies (e.g., real-time analytics, data mesh, AI/ML platforms)., • Technical Documentation: Produce deliverables such as architecture diagrams, data flow maps, security models, and technical documentation for solution handoff and operational support., • Agile/DevOps Leadership: Guide Agile/DevOps teams in implementing CI/CD pipelines, automated testing, and infrastructure-as-code for data solutions.Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor’s/Master’s in computer science, Engineering, or related field., • AWS/Azure Solutions Architect, Certified Data Engineer, or similar., • 5+ years in solution architecture or technical implementation, with 2+ years in data engineering or enterprise data platforms., • Proficient in system design, integration, and implementation across multiple technology domains., • Proven track record in deploying scalable financial systems (e.g., payment gateways, digital wallets, stablecoin or cryptocurrency systems preferred)., • Hands-on experience with cloud platforms (Azure/AWS/GCP), containerization (Kubernetes), and DevOps practices., • Excellent communication, collaboration, and critical thinking skills., • Understanding of financial regulations, compliance, and security standards.

Job Description Are you an experienced electrical engineer looking for an opportunity to grow your skills and work on a variety of exciting building projects? We are seeking an Electrical Engineer to join our Buffalo, NY office. In this role, you will work closely with senior engineers, project managers, and multi-discipline teams to develop electrical system designs, drawings, specifications, and reports for a diverse range of buildings. You will have the opportunity to gain experience in various markets, including healthcare, commercial, education, and institutional projects. This is a growth-focused position, ideal for an engineer eager to expand their knowledge and contribute to innovative, high-quality designs. At LaBella, we are passionate about problem-solving, sustainability, and creating impactful solutions for the built environment. The ideal candidate is self-motivated, detail-oriented, and eager to develop their expertise. Your responsibilities may include: Electrical Design & Engineering: • Develop electrical designs for power distribution, lighting, fire alarm, security systems, and telecommunications., • Perform load calculations for generators, transformers, switchgear, panel boards, VFDs, feeders, and branch circuits., • Prepare design drawings, technical specifications, and engineering reports., • Research and implement industry standards and best practices., • Assist with building condition assessments and system evaluations. Collaboration & Project Support : • Work closely with mechanical, civil, and structural engineers, as well as architects., • Assist senior engineers in multi-discipline project coordination., • Communicate with clients, manufacturers, and contractors to address project challenges and develop solutions., • Participate in project meetings and contribute technical insights. Technical Growth & Development: • Stay current with industry trends, codes, and emerging technologies., • Receive mentorship from senior engineers and take on increasing project responsibilities., • Bachelor’s or associate’s degree in electrical engineering, Engineering Technology, or a related field., • EIT certification preferred; working towards or having PE licensure is a plus., • Minimum 5 years of experience in electrical engineering within an A/E consulting firm, or closely related industry., • Experience with building system design. Healthcare experience is strongly preferred., • Proficiency in AutoCAD and Revit is required., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis) is required., • Understanding of national, state, and local electrical codes., • Strong organizational, communication, and problem-solving skills., • Ability to work on multiple projects simultaneously and meet deadlines. Salary Range: $85,000 - $125,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Collaborative team environment with mentorship opportunities., • Exposure to a variety of building projects in different industries., • Competitive salary and hybrid work flexibility., • Support for professional development and career growth. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescription: Precast Project Engineer - Civil/Structural Precast Project Engineer – Shape the Future of Concrete Design and Mentor the Next Generation Are you a precast concrete expert ready to lead and inspire? Fisher Associates is seeking a Precast Project Engineer to serve as a Subject Matter Expert (SME) and guide our team in designing and delivering advanced precast and prestressed concrete structures. In this key role, you’ll mentor junior engineers, ensure design excellence, and drive innovation across diverse civil and structural projects. Working with multidisciplinary teams, you’ll develop efficient, sustainable, and code-compliant precast solutions that shape the built environment. Join Fisher Associates, where your leadership, expertise, and passion for precision fuel impactful projects and professional growth. Apply today to advance your career as a leader in precast concrete engineering and help shape the future of infrastructure design About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Maintain up-to-date knowledge of codes, technologies, and advancements in the precast-prestressed field., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-HYBRID Requirements: What You Bring, Your Expertise as a Precast Project Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 10 plus years of experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations)., • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description Build iconic structures that shape skylines. At Enclos Tensile Structures, we design, engineer, fabricate, and install custom tensile structures that define skylines and transform public spaces - from stadiums to transportation hubs and beyond. Our work blends architectural vision with advanced structural engineering to bring lightweight, high-performance structures to life. We're seeking an Associate Engineer to join our Buffalo-based engineering team. This is an exciting opportunity for an early-career civil structural engineer who is ready to apply their technical foundation to complex, creative, and highly visible projects. Enclos Tensile Structures is an award-winning design-build contractor specializing in the engineering and construction of custom lightweight structures. Our team has collaborated with many of the world's leading architects, designers, and developers to deliver projects that combine architectural expression with structural performance. Our portfolio spans everything from elegant, functional canopies to some of the most iconic tensile structures in the built environment. Notable projects include: • Allianz Field, • SoFi Stadium, • Intuit Dome, • ATLNext Central Passenger Terminal Complex The Associate Engineer works under the supervision of senior level engineers to assist in the development and engineering of custom tensile structures. Primary responsibilities include computer modeling and finite element analysis using proprietary large deflection software to size steel and cable components, as well as connection design, while meeting the structural requirements of the industry building codes and the specified requirements of the customer. ESSENTIAL DUTIES AND RESPONSIBILITIES • Modeling and analysis of tensioned membrane structures using finite element large deflection software., • Summarize and present engineering results in report format for client review and approval., • Working with a project designer to develop general arrangement drawings for client review and approval., • Create fabric cutting patterns meeting the geometry requirements of the project., • Coordinate project work in conjunction with the Project Manager, Supervising Engineer, and Project Designer to ensure timely and accurate completion of the assigned project., • Responsible for personal task management and adherence to deadlines and scope., • Strong demonstrated ability to analyze and design steel fabricated structures. To achieve success, candidates should demonstrate the following core competencies: Attention to detail, organizational skills, problem-solving, interpersonal skills, written and verbal communication, teamwork, professionalism, quality orientation, dependability, initiative, and collaboration/relationship management. REQUIREMENTS • 0-3 years of relevant engineering experience., • Engineer-in-Training (E.I.T.) Certificate, • Bachelor of Science (BS) degree in Civil or Structural Engineering, • Excellent verbal and written communication skills., • Strong theoretical background with specific knowledge relating to designing steel structures. At the Enclos family of companies, compensation is determined based on several factors including but not limited to work experience, education, geographic location, certifications, etc. Your recruiter can share more about the specific compensation package for your preferred role during the hiring process. The successful candidate for the Associate Engineer position in Buffalo, New York can expect to earn $65,000 to $75,000 annually. EQUAL OPPORTUNITY EMPLOYER Enclos Corp is committed to providing equal employment opportunity to all applicants and employees regardless of their race, creed, color, religion, sex, age, national origin, disability, military service, protected veteran status, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state or local law. We are strongly committed to this policy and believe in the concept and spirit of the law. Enclos Corp is further committed to ensuring that employment decisions are based on valid job requirements. In addition, all employment actions, such as recruiting, hiring, training, promotion, compensation, benefits, transfer, layoff, and termination are administered fairly to all persons on an equal opportunity basis, without discrimination based on the protected categories named above. Enclos Corp will also provide qualified applicants and employees with disabilities reasonable accommodations, if possible, as required by law. Job Posted by ApplicantPro

Job Description Our team of talented individuals is what makes us successful. To support our team, we provide a balanced mix of benefits and programs. Your total rewards package includes competitive pay, benefits, and perks, flexible work-life balance, professional development opportunities, and performance and recognition programs. We offer a comprehensive benefits package that includes medical, dental, vision, life, and disability, voluntary benefit programs (critical illness, hospital, and accident), health savings and flexible spending accounts, and retirement 401K plan. One of our fundamental principles is to offer competitive health and welfare benefits to our team members, providing coverage and care for you and your family. Full-time employees working at least 30 hours a week on a regular basis are eligible to participate in our benefits and paid leave programs. We pride ourselves on our collaborative work environment and culture, which embraces our mission of providing financial and non-financial benefits back to the members of the Seneca Nation. Seneca Holdings is seeking a Systems Engineer in Williamsville, NY or Chantilly, VA. The Systems Engineer who will use professional technology engineering skills and experience to maintain and enhance all network infrastructure, SaaS configuration and integration, application management, end user devices and general tier 2/3 end user support for Seneca Holdings and its business subsidiaries. This position leads in the planning and implementation of system design, architecture, provisioning, and maintenance that is consistent with the company workflows and processes, while following industry best practices and meeting compliance and security objectives. This team member is responsible for researching, testing, configuring, installing, troubleshooting, operating and repairing systems and company infrastructure solutions. The ideal individual for this role will need to demonstrate strong organizational and communication skills (written and verbal), as well as a passion for superior customer service we are known for. Must be a team player yet work constructively and independently as directed. The System Engineer is a consummate IT professional, detail oriented and self-motivated individual who excels at both successfully and efficiently solving end-user, departmental and Companywide IT problems as well as developing, implementing, and supporting business systems solutions Summary of Location and Hours: • Hybrid Position – onsite in Williamsville, NY or Chantilly Virginia USA and telework as directed., • Monday – Friday approximately 8:00 am to 5:00 pm EST. Most service is provided during normal business hours. Seneca Holdings and its subsidiaries supports employees and locations all over the world, in many time zones. Planned work schedules to include nights and weekends may be necessary. Requirements for on call support coverage and working hours are also possible. Responsibilities include, but are not limited to: • Serve as a primary technical engineering contact and architect for managing Seneca Holdings enterprise SaaS (Software as a Service), • Provide technical oversight, verification and validation, supportability and effectiveness analysis for Microsoft systems and for projects impacting Microsoft Systems (to include but not limited to the Office 365 Cloud suite and SharePoint) and supporting infrastructure, • Design, testing and implementation and operations of Single Sign On (SSO) solutions, • Design, test, configure, and install new systems and network equipment, • Identify and resolve SaaS connectivity, network and related integration system performance problems, • Maintain and update system documentation and diagrams, • Overseeing system vulnerability security management program, • Troubleshoot and solve SaaS, workstation and network related access problems, • Interface with external vendors, suppliers, consultants as necessary, • Participates in Disaster Recovery testing, planning and execution of the plans as needed., • Participates in Security incident handling., • Communicates reported or discovered issue trends, major security events and Information Security incidents with appropriate management staff, as soon as identified., • Develop and implement Standard Operating Procedures for configuration, installation and support of technologies widely adopted across company, • Provide technical training sessions, 'lessons learned' for IT staff, • Ensures that system improvements are successfully implemented and monitored to increase efficiency, • Consistently prepare for and provide documented support for various audits throughout the year, • Identifying and leading positive change to evolve business processes, • Keep abreast of latest technology and industry trends, recommend equipment and system enhancements, upgrades and/or replacements as necessary to meet the IT needs of the Seneca Holdings and its subsidiaries, • Conduct all business in accordance with Seneca policies and procedures., • Microsoft Windows technical support, • Office 365 administration and troubleshooting experience including system implementation, management and documentation, • Software as a Service) SaaS integration experience (e,g, design, testing and implementing APIs), • Corporate Microsoft SharePoint design, implementation and administration, • Network infrastructure administration of routers, firewalls, access points and switches and the like, • Strong written/verbal communication skills, critical thinking and problem-solving skills, • BA/BS in computer sciences or related field, or equivalent years of experience, • Must be able to remain in a stationary position for extended periods of time., • Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, computer printer, etc. Equal Opportunity Statement: Seneca Holdings provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex/gender, sexual orientation, national origin, age, disability, marital status, genetic information and/or predisposing genetic characteristics, victim of domestic violence status, veteran status, or other protected class status. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation and training. The Company also prohibits retaliation against any employee who exercises his or her rights under applicable anti-discrimination laws. Notwithstanding the foregoing, the Company does give hiring preference to Seneca or Native individuals. Veterans with expertise in these areas are highly encouraged to apply.

Job DescriptionJob Title: General Manager & Principal EngineerLocation: Amherst, NYHire Type: Direct HirePay Range: $175,000 - $225,000 Work Type: Full-timeWork Model: OnsiteWork Schedule: Monday – Friday, 8am – 5pm (flexible) Nature & Scope:Positional OverviewThe Imagine Group is recruiting for a General Manager & Principal Engineer on behalf of our client, a leading national provider of business and technology solutions, specializing in engineering, IT and healthcare services in Buffalo, NY.In this role, you will be responsible for the overall strategic direction, operational management and financial performance of a particular division of the company. This includes overseeing delivery, managing client relationships, driving business development, and supervision of engineering staff. The General Manager ensures projects are completed on time, within budget and to the highest quality standards while also fostering a culture of innovation, safety and continuous improvement. Role & Responsibility:Tasks That Will Lead To Your Success • Develop and execute transformation strategy: Create and implement a comprehensive plan to transition the firm from a primary focus on process engineering to offering a full range of engineering services, including mechanical, electrical, instrumentation, civil/structural, and project management capabilities., • Identify new service opportunities within existing core business and clients., • Promote engineering services for local and regional industrial and chemical sectors., • Strategic hiring and upskilling: Identify staffing and skill gaps necessary for the transition and develop a strategy to address them. This will involve coordinating with other engineering offices and recruiting experienced engineers from various disciplines and creating professional development programs to cross-train existing staff and build the firm's new capabilities., • Create and implement change management: Communicate the strategic vision and manage the organizational changes required for the transformation. Build a culture that embraces new challenges and fosters collaboration across different engineering disciplines., • Manage operational change: Establish the new internal processes, workflows, and procedures required for a full-service firm, such as integrating multi-disciplinary teams on projects and managing a broader scope of services., • Business Development & Client Relations, • Represent the firm's new capabilities: Act as the external face of the company. Represent its expanded capabilities to clients, industry groups, and at conferences to generate interest and new business., • Manage strategic partnerships: Identify and secure partnerships with other firms or contractors to augment capabilities during the transition phase, ensuring the firm can deliver on its new "full-service" promises., • Marketing and Sales: With sales staff direct identification of new market opportunities, grow the client base, and expand the firm's service offerings., • Trade Events and Outreach: With key engineering staff and sales team represent the firm in professional organizations, with clients, and at industry events to build and maintain positive relationships.Operational & Financial Leadership, • Strategic Planning: Develop and execute short-term and long-term strategic business plans to achieve company goals for growth, revenue, and profitability., • Budget and Financial Management: In coordination with the CFO and his team prepare and oversee departmental budgets, manage financial forecasting, and review profit and loss reports., • Project Contracting: Supervise and assist as needed Projects Managers and the Proposal Manager to manage contracts, prepare proposals and bids, and negotiate agreements with clients and partners. Team Leadership & People Development, • Provide mentorship, coaching, and professional development opportunities to team members to foster growth and improve performance., • Conduct performance reviews, set clear goals, manage resource allocation to maximize team efficiency, and promote professional development and cross-training to build a versatile engineering team., • Recruit, mentor, and cultivate a positive and collaborative work environment that encourages teamwork, high morale, and technical excellence. Technical & Quality Oversight • Maintain a deep understanding of the firm's technical services and industry trends to guide strategic decisions and drive innovation., • Direct and review engineering designs and changes, ensuring technical accuracy and soundness of methods used by staff., • Oversee quality assurance and quality control (QA/QC) processes for all project deliverables, ensuring the team's work complies with all relevant industry standards, regulations, and safety codes. Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor's degree in an engineering discipline (e.g., Civil, Mechanical, Electrical, or related). Master’s degree in engineering management or an MBA is preferred., • Minimum 15+ years of progressive experience in an engineering field, including 5-7 years in managerial or leadership roles with P&L responsibility., • Professional Engineering (P.E.) license is required, in addition to proven experience in managing engineering operations, project delivery, and resource allocation., • Demonstrated success in business unit leadership, client development, and organizational transformation., • Expert-level technical knowledge relevant to the firm's specific engineering services., • Proficiency with industry-standard software, such as computer-aided design (CAD) programs, project management software (e.g., MS Project)., • Strong analytical skills for evaluating technical information and complex problems.

Job Description Fairfield by Marriott/Buffalo-Airport, 4271 Genesee Street, Cheektowaga, NY 14225 We are looking for a Maintenance Assistant to join our Team! The Fairfield Inn & Suites® by Marriott Buffalo Airport, is conveniently located across from Buffalo Airport with free airport shuttle service, you’ll also be 3 miles from Walden Galleria Mall and less than 10 miles from Downtown Buffalo. Our Fairfield has 140 beautifully appointed guest rooms, and we serve complimentary breakfast buffet to all our guests. The Fairfield by Marriott/Buffalo Airport is one of the 50 hotel properties owned and managed by the award-winning hotel management company, Buffalo Lodging Associates. The Maintenance Assistant will be responsible for the upkeep of the hotel property, assisting the Chief Engineer. Role: • Major duties include basic repair work, painting, wall covering, plumbing, electrical work, pool operations, preventative maintenance, and indoor and outdoor grounds upkeep., • Maintains all fixtures and equipment according to the preventative maintenance schedule and records such maintenance in log books as required by BLA and hotel brand., • Maintains and services pool and spa areas including testing and recording as stated by the state and local regulations. Pay range $18 -$19 What You Bring: At least 2 years of mechanic experience in a hotel or a related field. HVAC, electrical, plumbing, boiler operations and general maintenance skills required. Must be able to bend, kneel, lift, push, carry and pull up to 75 lbs. Requires reaching overhead, climbing, crouching, and twisting. Valid drivers license required. What We Offer You: At Buffalo Lodging, we are committed to keeping our most important assets – our employees – healthy, happy and productive. To achieve this, we offer a variety of benefits including the following: • Paid Weekly (Every Friday!), • Medical, Dental & Vision Insurance, • Competitive 401 (k) Retirement Savings Plan with Generous Employer Match, • Paid Vacation and Sick Time, • Paid Holidays, • Tuition Reimbursement, • Flexible Spending Account, • Company Paid Life Insurance, • Company Paid Short-Term Disability Insurance, • Long-Term Disability Insurance, • Employee Assistance Program, • Hotel Discounts – for You, Your Friends and Family, • Monthly Employee Appreciation Activities & Events, • Learning and Development Opportunities, • Employee Referral Program

Job Description Buffalo, NY or Syracuse, NY or Cleveland, OH regions available. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer's Service Engineers., • Providing assistance and training to Customer's Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. #ZR

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Buffalo, NY Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Coordinate with architects, engineers, consultants, subcontractors, and client representatives.

Professional Engineer (PE) license. Involvement in a professional engineering organization a plus. Apply engineering best practices to ensure designs are safe, efficient, and cost-effective.

Our client is an exceptional multi-disciplinary firm, with Architecture and Engineering services across a whole range of market areas including Commercial, Healthcare, Education and Government. Bachelors in Mechanical Engineering.

Vocational and/or college degree in construction management, civil engineering, or related field strongly preferred. Create and maintain a team relationship with the owner, architect, construction manager, LeChase’s supervision, LeChase’s field forces, subcontractors, suppliers, other prime cont

Assistant Project Manager candidate with construction experience working in the field for a General Contractor in NYC or Long Island.

Bachelor's degree in Construction Management, Mechanical Engineering, or related field. Coordinate with architects, engineers, and other stakeholders to ensure project alignment. The ideal candidate will have a solid background in project management, particularly within the construction and mechanic

Coordinating with field crews, vendors, and subcontractors.

SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products.

Installs and services high-horsepower motors, coils, transformers, and control equipment; operates specialized tools and machinery required for the installation and repair of electrical systems. Consistently strives to enhance operations by reducing turnaround times, improving workflow efficiency, a