Trabajos fire safety en Houston, TexasCrear alertas

Job Description Responsible for performing thorough inspections and related repair on company vehicles. Performs over the road services requiring to rescue buses from other locations while remaining in compliance with FMCSA regulations. JOB SPECIFIC RESPONSIBILITIES: PLEASE LIST BY ORDER OF IMPORTANCE Routine servicing and overhauling of all diesel enginesInspecting the engines and detecting technical malfunctionsSpecializing in repairing and maintaining parts of engine, such as fuel injections systems, emission controls systems, and preventative maintenanceDiagnosing "check engine light" fault codes, aftertreatment engine system, engine misfires, and A/C electrical systemDisassemble and overhaul internal combustion engines, pumps, generators, transmissions, clutches, and differential units.Skilled in diagnosing major electrical and engine components, performing repairs as needed Order necessary parts as needed for tasks being performedInspect and test defective equipment, diagnosing malfunctions using diagnostic software per the manufacturerRewire lights and instrument panel components.Diagnose and replace faulty components such as brakes, wheel-seals, turbos, alternators, transmissions, internal engine adjustments and startersFollow safety standards per FMCSA regulations to remain in complianceFuel and wash buses when requiredRoad test buses to detect malfunctionsMove vehicles within property limits, contigent to safety training Perform over the road service calls with little to no supervisionAbility to work indoors and outdoors (i.e. inclement weather, heat, cold, humidity, etc.)Prioritize and meet deadlinesMaintain the shop clean and organizedExcellent communication skills, both written and verbalOther duties as required EXPERIENCE: Please indicate the type of experience required/preferred for the positionRequired or Preferred:5+ years of job-related experiencerequired.Bilingual- Spanish/ English EDUCATION: Minimum Formal Education: Click on the cell below to see a drop down menu of options for education. Required or Preferred:High school diploma or equivalent required; additional training beyond high schoolrequired. LICENSES and CERTIFICATIONS: Please identify whether certification must be held upon hire or obtained within a designated period.Required or Preferred:CDLPerferredDiesel Technical Certification required.ASE Certificationpreferred. PHYSICAL DEMANDS: Heavy - Exerting 60-100 lbs. occasionally, 25-60 lbs. frequently, or up to 10-20 constantly.Job DemandsFrequencyBrief Description of Job DemandsFor each item, click on the relative Frequency cell to indicate the frequency of each physical demand.BendingFrequently - 1/3 - 2/3 of the time CarryingFrequently - 1/3 - 2/3 of the time ClimbingFrequently - 1/3 - 2/3 of the time CrouchingFrequently - 1/3 - 2/3 of the time Fine Dexterity (skill/adroitness with hands; ex typing, administering shots, etc.)Occasionally-Up to 1/3 of time Foot Control (manipulation of pedals, controls, equipment, etc. with feet)Occasionally-Up to 1/3 of time HandlingFrequently - 1/3 - 2/3 of the time Hearing (ability to interpret and differentiate between sound, etc.)Constantly - 2/3 or more of the time KneelingRarely - Less than 1 hour/week Lifting/ExertingFrequently - 1/3 - 2/3 of the time Pushing/PullingFrequently - 1/3 - 2/3 of the time ReachingFrequently - 1/3 - 2/3 of the time SittingRarely - Less than 1 hour/week StandingOccasionally-Up to 1/3 of time Talking (ability to speak coherently and be understood by others)Occasionally-Up to 1/3 of time TwistingOccasionally-Up to 1/3 of time Vision (ability to differentiate between color, to determine distance, depth perception, etc.)Constantly - 2/3 or more of the time Walking/Moving (from one location to another to perform work)Frequently - 1/3 - 2/3 of the time NON - PHYSICAL DEMANDS: Job DemandsFrequencyBrief Description of Non - Physical Job DemandsFor each item, click on the relative Frequency cell to indicate the frequency of each non - physical demand.Stress Demands - Person in the position is responsible for maintaining stable performance under pressure or opposition, and handling stress in a manner that is acceptable to others and to the organization.Occasionally-Up to 1/3 of time Time Pressures – Person in the position is responsible for producing work/outcomes relatively quickly; within a specified timeframe.Occasionally-Up to 1/3 of time Frequent Change of Tasks – Person in the position is responsible for reprioritizing workload based on the needs of the organization.Frequently - 1/3 - 2/3 of the time Performing multiple tasks simultaneously - Person in the position is responsible for working on a variety of different tasks simultaneously, while maintaining the quality of the work.Frequently - 1/3 - 2/3 of the time Tedious or exacting work – Person in the position is responsible for producing work that is routine and/or repetitious in nature.Frequently - 1/3 - 2/3 of the time Noisy/Distracting Environment – Person in the position will be subject to noise and distraction throughout the workday.Occasionally-Up to 1/3 of time Variable Schedule/Overtime – Person in the position is required to work evenings and/or weekends, or is required to work overtime.Occasionally-Up to 1/3 of time Other (please describe) ENVIRONMENTAL CONDITIONS: Click on the cell below each heading to see a drop down menu of options of Environmental Factors. Environmental / Health and Safety ConcernsFrequencyBrief Description of Working ConditionsWorking conditions are relatively free from unpleasant environmental conditions.Frequently - 1/3 - 2/3 of the time Extreme temperature (heat, cold, extreme temperature changes).Frequently - 1/3 - 2/3 of the time Wetness and/or humidity (bodily discomfort from moisture).Frequently - 1/3 - 2/3 of the time Respiratory Hazards (fumes, gases, chemicals, radiation, dust/mites and dirt).Constantly - 2/3 or more of the time Noise and Vibration (where earplugs would be recommended).Constantly - 2/3 or more of the time Working conditions are relatively free from hazards.Rarely - Less than 1 hour/week Mechanical HazardsOccasionally-Up to 1/3 of time Toxic/Chemical HazardsRarely - Less than 1 hour/week Fire HazardsRarely - Less than 1 hour/week

As a Industrial Mechanic, you will work with the maintenance manager and production supervisor to complete building repairs, equipment installation, troubleshooting and installation, fulfillment of assigned work orders and unforeseen repairs in a timely fashion. You’ll follow good manufacturing practices to maintain inventory, complete preventative maintenance, good housekeeping and ensure compliance with all safety and Summary of Position: Repairs and maintains plastic molding machinery and mechanical equipment such as motors pneumatic tools, hydraulics, conveyor systems, electrical devices and production machines and equipment. Uses hand tools, power tools, and precision measuring and testing equipment. Reads blueprints, schematics, and diagrams. Responsibilities: • Follows, without exception, all work instructions and safety policies, including use of all PPE and safety equipment, • Performs routine preventive maintenance checks on all production equipment and machinery, • Repairs basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switches, • Observes and listens to mechanical devices in operation to locate causes of problem, • Dismantles devices to gain access to and remove defective parts, • Lubricates and cleans machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plant, • Accomplishes all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency, • Follows all safety rules and procedures including Lockout/Tagout program, housekeeping and observes the operations to insure a safe work environment, • Troubleshoot equipment failures to determine root cause and initiate appropriate remedial action., • Repair of equipment to improve availability and reliability for production., • Collect and analyze work delay codes to identify challenges to timely completion of scheduled jobs and work with available resources to reduce delays., • Ensure preventative maintenance compliance and that repair history is properly documented., • Assist in sourcing and requisitioning maintenance supplies, equipment, and services within budgeted guidelines., • Performs other related duties as assigned Requirements: • Three to five years of work experience in a manufacturing plant as a Maintenance Mechanic or Technician, • Knowledge and experience working with high-speed equipment and electric-pneumatic controls., • Able to use both a MIG welder, and ARC welder., • Able to order parts and maintain inventory of all maintenance-related material., • Advanced working knowledge on mechanical/electrical systems and components; including, but not limited to, Pneumatic, Hydraulic, Pumps, Gear Boxes, Power Transmission, Material Handling, Sensor, Transmitters, DC and AC circuits, Transformers, Power and Energy, Arc Flash, • Working knowledge and experience on Automation; Industrial Process and Control system; PLC; Measuring Devices; Instrumentation; Robotic Application; Bulk Handling System, • Working knowledge and experience on Facility Maintenance (Roof, Dock, plumbing) and Plant Equipment (Boiler, Air Compressors, Ammonia/Freon/Glycol Refrigeration, HVAC, Ventilation, Cooling Tower, Condenser, Backflow preventer, Sprinkler and Fire Extinguisher, Wastewater System, …), • Planning, scheduling & assigning ability while well experienced in defining priorities, required skills & resources., • Hold practical knowledge of Microsoft Office., • Multitasked in a fast-paced environment with lots of changes in direction bases business requirement., • Excellent problem-solving and analytical skills; ability to work collaboratively and effectively with other departments. Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Benefits: Not Applicable

Job Description Job Summary: We are seeking a skilled and reliable Low Voltage Technician to join our team. In this role, you will install, maintain, and troubleshoot low voltage systems including voice/data cabling, CCTV, access control, and alarm systems. Ideal candidates will be detail-oriented, safety-conscious, and able to work independently or as part of a crew. Responsibilities: • Install, terminate, and test Cat5e, Cat6, coaxial, and fiber optic cabling, • Install and configure low voltage systems such as CCTV, access control, fire alarms, and AV equipment, • Read and interpret blueprints, schematics, and technical drawings, • Perform system testing, troubleshooting, and maintenance, • Follow safety regulations and industry best practices, • Maintain accurate documentation of work performed, • Communicate with clients, contractors, and project managers professionally Qualifications: • 2+ years of experience in low voltage installation or related field preferred NOT REQUIRED, • Familiarity with BICSI standards and NEC codes, • Ability to work from ladders, lifts, or in confined spaces, • Must have own basic hand tools, • Valid driver’s license and clean driving record, • [Optional: BICSI certification or state low voltage license preferred], • Must be able to travel Benefits: (Optional – include if applicable) • PTO and Paid Holidays, • Training and Advancement Opportunities

Job Description The Commercial Electrical Supervisor is a field leadership role responsible for overseeing the day-to-day execution of commercial electrical construction projects. This position manages crews of electricians and apprentices, ensuring all work is completed safely, on schedule, and to the highest standards of quality and code compliance. The Supervisor acts as the primary link between project management and field teams, coordinating manpower, materials, and workflows. Key Responsibilities Field Leadership & Supervision • Lead, mentor, and supervise crews of journeyman electricians and apprentices on commercial project sites, including tenant improvements, ground-up construction, and service work ., • Plan, assign, and delegate daily work activities to maintain production, quality, and schedule performance ., • Train and develop team members, fostering a culture of accountability, craftsmanship, and safety . Technical & Project Execution • Read and interpret blueprints, electrical plans, one-lines, riser diagrams, and project specifications. Translate design intent into executable field plans ., • Perform layout, rough-in, trim-out, feeder installations, branch circuits, lighting, controls, and equipment installation ., • Coordinate material takeoffs, tools, and equipment needs with the office and warehouse to minimize downtime and waste ., • Troubleshoot complex field issues and provide real-time solutions to maintain project momentum . Safety & Compliance • Enforce and model company safety policies, OSHA regulations, and industry standards. Lead job hazard analyses and toolbox talks ., • Ensure all installations meet National Electrical Code (NEC), local code, and project specification requirements ., • Prepare for and support inspections by Authorities Having Jurisdiction (AHJ), utility representatives, and project inspectors . Coordination & Administration • Coordinate project activities with Project Managers, General Contractors, vendors, and other trades to sequence work and resolve scheduling conflicts ., • Maintain accurate project documentation, including daily reports, progress updates, photo logs, and red-lined drawings ., • Identify potential issues, risks, or delays early and escalate as needed to ensure project success ., • Track labor hours, productivity, and provide input on change orders and project close-out activities . Qualifications & Requirements Experience & Education • Minimum of 5-7 years of commercial electrical experience required ., • At least 2-5 years of experience in a supervisory, foreman, or lead role managing field crews ., • High school diploma or equivalent required; completion of an electrical trade school or apprenticeship program preferred . Licenses & Certifications • Valid driver's license with a clean driving record ., • OSHA 10 or OSHA 30 certification preferred . Knowledge, Skills & Abilities • Strong working knowledge of the National Electrical Code (NEC) and local building codes ., • Proficiency in reading and interpreting blueprints, specifications, and electrical schematics ., • Demonstrated ability to manage manpower, materials, and project schedules effectively ., • Excellent communication, leadership, and problem-solving skills ., • Ability to work in a field-based, hands-on supervisory capacity, which may include lifting, climbing, and working outdoors in varying conditions . Preferred Qualifications • Experience managing multiple crews or large-scale commercial projects (e.g., data centers, healthcare, industrial facilities, casinos, etc) ., • Experience with low-voltage systems, controls, or fire alarm systems ., • Proficiency with construction management software (e.g., Procore, Bluebeam, Microsoft Office Suite) . Compensation & Benefits • Competitive wage, • Overtime eligibility., • Comprehensive benefits package including medical, dental, and vision insurance ., • 401(k) retirement plan with company match ., • Paid time off (PTO) and paid holidays ., • Opportunities for career development and advancement into Superintendent or Project Management roles .

Job Description We are seeking skilled and experienced Apprentice and Journeyman Electricians with expertise in commercial construction. The ideal candidates will be responsible for installing, maintaining, and repairing electrical systems, with a strong focus on working with conduit pipe and ensuring compliance with safety and building codes. Key Responsibilities: • Install, repair, and maintain electrical systems in commercial construction projects., • Work with various types of conduit pipe, including EMT, PVC, and rigid conduit., • Read and interpret blueprints, electrical schematics, and technical drawings., • Perform wiring, grounding, and panel installations according to code requirements., • Test electrical systems and components for safety, efficiency, and compliance., • Troubleshoot electrical issues and perform necessary repairs., • Ensure all work meets NEC (National Electrical Code) and local regulations., • Collaborate with other trades and contractors to complete projects on time., • Maintain a safe and organized work environment, adhering to OSHA guidelines. Qualifications: • High school diploma or equivalent., • Valid Apprentice or Journeyman Electrician license. (Varies by State), • Minimum of 5 years of experience in commercial electrical work., • Extensive experience working with conduit pipe and electrical installations., • Strong knowledge of NEC and local electrical codes., • Ability to read and interpret blueprints and electrical diagrams., • Excellent problem-solving and troubleshooting skills., • Ability to lift and carry heavy equipment and work in various environmental conditions., • Valid driver’s license., • Ability to pass background check. Preferred Skills: • Experience with fire alarm systems, lighting controls, and emergency power systems., • Ability to operate power tools and testing equipment., • Strong attention to detail and organizational skills., • Effective communication and teamwork abilities. (Pay is based on experience) Apply Now to get in contact with a recruiter! \nCompany Description What is INDUSTRY? We’re a construction company first, devoted to changing the way contractors staff their projects. We match qualified, proven professionals with the top construction opportunities in the business. This allows us to provide our clients with a diversified and superior workforce while creating a stable work environment for our employees. What is INDUSTRY?\r\nWe’re a construction company first, devoted to changing the way contractors staff their projects. We match qualified, proven professionals with the top construction opportunities in the business. This allows us to provide our clients with a diversified and superior workforce while creating a stable work environment for our employees.

Job Description Job Title: Junior Tech Location: Houston and Surrounding Areas Salary: $18.00 - $23.00 per hour Additional Compensation: Paid Holidays • Paid Vacation Job Summary: We are seeking an experienced Junior Tech Controls Installer to join our team. The ideal candidate will have a strong background in electrical and controls installation, with at least 2 years of experience running conduit and installing control devices on HVAC systems (AHU, FCU, FPB, VAVs). This position requires proficiency in conduit installation and low-voltage wiring termination. Key Responsibilities: • Run electrical conduit (3/4" and 1-inch)., • Read and interpret control and mechanical drawings., • Pull and terminate low-voltage cables., • Install control devices on air handling units (AHUs), fan coil units (FCUs), fire protection panels (FPBs), and variable air volume (VAV) boxes., • Ensure all work meets quality standards and safety regulations. Required Qualifications: • Minimum 2 years of commercial electrical experience., • Proven experience with controls installation and running conduit., • Proficiency in installing 3/4" and 1-inch conduit., • Ability to read and understand control and mechanical drawings., • Must have your own transportation and appropriate tools., • Must be self-motivated, dependable, and able to work effectively in a team. Additional Qualifications: • Previous experience in controls installation on HVAC systems (AHUs, FCUs, FPBs, VAVs) is a plus., • Strong problem-solving skills and attention to detail. Work Environment: • This is a full-time position based in Houston and surrounding areas., • Requires physical work, including running conduit, pulling wires, and installing control devices.

Job Description McCorvey Sheet Metal is a family-owned and operated company. With offices in Houston, Orlando, Dallas, Fort Worth, Austin, and San Antonio, McCorvey Sheet Metal works primarily on larger projects such as hospitals, research labs, sports stadiums, schools, and many other vertical markets. We are seeking a dedicated Sheet Metal Project Manager, an organized and efficient employee to become our next Project Manager in Houston. In this role, you will work with the VDC to coordinate and accomplish the necessary project tasks and requirements. Candidate must have an eye for detail and a go-getter personality, ready to help synchronize all the project elements and make them operate successfully. Some duties may include coordinating the activities of a project to ensure cost, schedule, document control and quality standards are met. Senior Project Manager • Goal – Free up time for the VDC to draw and coordinate duct-only, • Submit RFI’s, • Submit As-Built drawings, • Communicate with field foreman 3 times a week, “minimum” to update the project schedule with the current field updates., • Facilitate Kickoff Meeting with office/field, • Update project address for new project, • Create and print drawings and assure they are sent with deliveries and load to project documents sheet, • Complete change proposal information to submit to the change proposal department., • Get vendor quotes for changes for all cost proposals • Always request standard lead time pricing and quick ship pricing options, • Release all duct equipment with VDC confirmation (VAVs, FDs, Grilles, etc.) • Assist with equipment take-off’s, • Use updated Release Form, • Tag fire dampers, • Make/ send ductwork submittal drawings for approval, • Keep up with project tasks sheet for the project (training required), • Oversee all day-to-day operations for project assigned (try to handle all calls), • Apply onsite dates to contract batches, • Coordinate with field on upcoming deliveries and batch priorities, • Keep a current set of drawings for every project assigned via Smartsheet, • PO requests, • Send monthly Change Proposal Logs, • Send Monthly RFI Logs, • Keep a duct leakage log for all reports sent to foreman by project (training required) • Receive results and update Duct Leakage Log per project, • Request schedule updates every 60 days, • Update new project schedule in schedule review, • Review & update cost proposal logs, • Follow up on vendors shipped items to make sure they are on site prior to rough start date, • Notify vendor of any missing or damaged material and track until all items are received, • Contact foreman to send packing slips for received material, • Track and log all foreman field documentation: Daily Reports, Delays, Wage Scale Forms, • Monitor job site manpower with labor manager along with rental equipment with the mindset to help us run extremely lean and mean., • Assist getting staffing agencies enrolled on CIP projects, safety requirements, orientation, badging, special jobsite requirements, • Follow up on outstanding collection invoices, • Keep project documents sheet updated, • Must be willing to work in Smartsheets for all the tacking., • Willingness to work in CAD/ BIM is desired. Benefits: • Weekly Pay, • Medical, Dental, Vision, Life Insurance, • Profit Sharing Program, • 401K Retirement, • 7 Days of Holiday Pay, • Referral Bonuses, • Paid time off, • Free lunch on Fridays

Job Description Contract Hotshot Drivers Wanted Rapid Fire Freight Houston, TX & Surrounding Areas Rapid Fire Freight is a new and growing hotshot delivery company looking for dependable contract drivers to join our team. We service manufacturing facilities, machine shops, tooling companies, oilfield suppliers, construction companies, industrial customers, and more. We are looking for owner-operators with reliable trucks and trailers who want consistent work and the flexibility of being an independent contractor. Equipment We Are Hiring We are currently accepting: We have had numerous pickup trucks apply, we are now mainly looking for flatbeds. • Pickup Trucks (minimum vehicle requirement), • Small Flatbeds, • Large Flatbeds, • Mini Floats We do NOT accept: • Sedans, • SUVs, • Vans You do not need a brand-new truck. We simply require a vehicle that is reliable, properly maintained, and safe to operate. What We Haul Our drivers transport: • Pallets of various sizes and weights, • Manufacturing materials, • Tooling and machine parts, • Pipe and steel products, • Construction materials, • Industrial equipment, • Oilfield-related freight, • Emergency same-day freight Most deliveries are within Houston and surrounding areas, but opportunities are available throughout Texas. Driver Pay • Pickup Truck Drivers: 65%–70% of load revenue, • Flatbed & Mini Float Drivers: 70%-75% of load revenue, • Weekend On-Call Loads: Additional 24% premium per load Only One Weekly Deduction Rapid Fire Freight provides cargo insurance for all approved drivers. The only deduction is: • $30.00 per week for cargo insurance No hidden fees. No dispatch fees. No equipment rental fees. Driver Requirements Applicants must have: • Valid Driver's License, • Reliable Pickup Truck or Approved Trailer Setup, • Minimum Liability Insurance on Vehicle, • Smartphone with Internet Access, • Safe Driving Experience, • Ability to Follow Customer Requirements Required PPE Many of our customers operate industrial facilities and job sites. Drivers should have: • Hard Hat, • High Visibility Safety Vest, • Steel-Toed Boots TWIC Card Preferred A TWIC Card is highly preferred due to the number of industrial and port-related customers we service. Don't have one? We can provide a grace period for qualified drivers to obtain a TWIC Card after being hired. Drug Screening All drivers must pass an initial drug test for insurance and customer compliance purposes. Daily Operations Rapid Fire Freight operates primarily through our mobile dispatch system and phone communication. Drivers will be responsible for: • Receiving dispatches through the app and phone, • Taking photos at pickup locations, • Taking photos at delivery locations, • Obtaining the receiver's printed name, • Collecting digital signatures through the app, • Communicating professionally with dispatch and customers Work Schedule We operate 24 hours a day, 7 days a week. You choose your weekend availability. Every day, simply check in and let dispatch know you're available to work. We will do our best to start you with deliveries close to your home location whenever possible. No Office Required After your initial interview and onboarding process, there is no need to report to an office unless necessary You work directly from your vehicle and communicate through our dispatch system. Why Drive for Rapid Fire Freight? • Keep 65%–75% of load revenue, • Only one weekly deduction, • Flexible schedule, • No office reporting unless necessary, • Houston/surrounding areas-focused routes, • Statewide opportunities available, • Growing company, • Consistent demand from industrial, manufacturing, construction, and oilfield customers Join Rapid Fire Freight Today If you own a pickup truck, flatbed, or mini float and want the freedom of independent contract work while earning competitive pay, we'd like to hear from you. Apply today and help us build Houston's next great hotshot delivery company. www.RapidFireFreightHotshot.com \nCompany Description Rapid Fire Freight is a hotshot delivery company. Rapid Fire Freight is a hotshot delivery company.

Job Description Company OverviewGilmore's manufacturing and headquarters are in Houston, Texas USA, and has a network of distribution partners that support global regional markets.Our people are fundamental to the success of our organization and remain at the heart of our achievements. At Gilmore, we aim to develop our business around a valued and motivated workforce that encourages personal development and allows our people to flourish and realize their fullest potential. Role SynopsisAssembly of valves and kits, testing valves, and packaging for shipment to customer in a timely and efficient manner. Essential Duties & responsibilities (includes, but not limited to the following)To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions.Assemble and test valves and kits based on procedures and drawings on production ordersAssemble and label repair kits, seal kits, and prepare loose parts for shipment.Strive to meet customer delivery due dates.Complete necessary paperwork and computer entry on all jobs.Cleanliness of the assembly and test areas.Perform other work-related tasks, as assigned Compliance RequirementsGilmore has a Business Ethics Policy (the "Policy") which provides guidance to employees in day-to-day roles, as well as helping the employee and the business always comply with the law. The incumbent must read, understand and comply with, always, the Policy along with all other corresponding policies, procedures and directives. QHSE Responsibilities Demonstrate a personal commitment to Quality, Health, Safety and the EnvironmentApply Gilmore, and where appropriate Client Company's, Quality, Health, Safety & Environment Policies and Safety Management SystemsPromote a culture of continuous improvement, and lead by example to ensure company goals are achieved and exceeded Qualifications/Work ExperienceEducationEssential High School Diploma or equivalent.ExperienceEssential Experience in manufacturing and assembly environment, preferably experience with subsea equipment.Ability to communicate with others and work well with a variety of personnel in a collaborative team environment.Employee must be highly motivated and well suited to a varying schedule and the challenges of working different hours. Able to identify and solve problems, manage multiple priorities and multitask. Physical DemandsThe physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions.Physical Dexterity required; ability to ascend/descend ladders; climb or balance; ability to reach with hands/arms, lift, push, pull, and move objects fifty (50) pounds or more.Ability to operate hand tools, such as grinders, drills, drill press, etc.Sitting, standing and walking.Employee may need to walk and stand at least eight (8) hours per day.Stoop, kneel, crouch, or crawl.Speak/hear and use specific vision abilities such as close vision, distance vision, colour vision, peripheral vision, depth perception and ability to adjust focus.Work involves moderate to frequent exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odours and/or loud noises. Employee may be required to work long hours at times, up to twelve (12) hours per day. Work EnvironmentThe work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions.Work environment involves some exposure to hazards or physical risks, which require basic safety precautions. Ability to wear and utilize Personal Protective Safety Equipment (PPE). Required equipment includes steel toed shoes, safety glasses/goggles. Additional PPE may be required, e.g., safety harnesses, Fire Retardant Clothing (FRC), hard hats, or other as assigned.Work conditions will vary and may include working up to twelve (12) hours per day or more in an outdoor environment with exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odours and/or loud noises.All offers of employment at Gilmore, a Control Devices, LLC company, are contingent upon the successful completion of a background check and drug screen.

Job Description Contract Flatbed Driver (1099) – Hotshot Delivery Rapid Fire Freight – Houston & Surrounding Areas Rapid Fire Freight is a new and growing hotshot delivery company serving Houston and the surrounding areas. We specialize in time-critical freight, manufacturing materials, oilfield supplies, tooling, equipment, pallets, pipe, and other commercial freight. We are currently seeking independent contract drivers (1099) with their own small or large flatbed truck/trailer to join our network. Equipment Requirements We are looking for drivers with: • Flatbed trucks or trailers ranging from 10 ft to 40 ft, • Small flatbeds, • Large flatbeds, • Proper load securement equipment, • Reliable, roadworthy vehicle and trailer Driver Requirements • Must be at least 21 years old, • Valid driver's license, • Smartphone with data service, • Minimum state-required liability insurance on your vehicle, • Ability to safely secure and transport freight, • Professional appearance and customer service skills PPE Requirements Many of our customers operate in industrial, manufacturing, construction, and oilfield environments. Drivers should have: • Hard Hat, • High-Visibility Safety Vest, • Steel-Toed Boots, • Other PPE as required by customer facilities TWIC Card A TWIC Card is a major plus, but not required to start. If you do not currently have a TWIC Card, that's okay. We can keep you moving on loads that do not require one while you work on obtaining it. Technology Drivers must be comfortable using a smartphone application. Our driver app will: • Dispatch loads directly to your phone, • Provide pickup and delivery locations, • Give turn-by-turn navigation assistance, • Require pickup and delivery photos, • Allow load status updates in real time Pay & Compensation Earn 70%–75% of every load you complete We keep it simple: • No hidden fees, • No dispatch fees, • No weekly lease payments, • No fuel card charges Only one deduction: • $30 per week for cargo insurance (provided by Rapid Fire Freight) Weekend Bonus Rapid Fire Freight operates 24/7, but weekend work is completely optional. Drivers who choose to work weekends receive: +25% Weekend Rate Increase Experience • Hotshot experience is preferred but not required, • Flatbed experience is a plus, • New drivers are welcome if they have the right equipment and work ethic Why Drive with Rapid Fire Freight? • Keep 70%–75% of load revenue, • Only one weekly deduction, • Flexible schedule, • No forced dispatch, • Work when you want, • Growing company with room to expand, • Consistent opportunities in manufacturing, industrial, oilfield, and commercial freight, • Company operates under a TXDOT number Apply Today If you own a 10–40 ft flatbed truck or trailer, have the equipment to haul freight safely, and are looking for a flexible opportunity with strong earning potential, we want to hear from you. Rapid Fire Freight Fast. Reliable. Delivered. \nCompany Description Rapid Fire Freight is a hotshot delivery company. Rapid Fire Freight is a hotshot delivery company.

Job Description About The Sustain Network We specialize in giving job seekers life changing career opportunities with the best organizations in the hospitality and restaurant industry. From fine dining, to private dining, to quick service and fast casual - world class organizations trust The Sustain Network to find great talent, and great talent trusts us to match them with culture-forward organizations. If you are reading this, there is likely a job opportunity waiting for you in your area, right now! Apply today! This job is an opportunity to work for Villa Kitchen | Dinner Club Concierge | Luxury Conscious Travel ABOUT THE ROLE Join a chef-led collective producing intimate, high-end dinners and private events in villas, estates, and design-forward spaces. We pair culinary excellence with provenance—working with BIPOC and Indigenous growers, fisherfolk, and makers—to tell cultural food stories through refined, modern menus. If you’re a disciplined, ambitious chef who loves ownership, hospitality, and beautiful details, this is your stage. WHAT YOU'LL DO Design seasonal, multi-course menus that spotlight origin and craft (with vegetarian/vegan/gluten-free variants when needed). Source responsibly: build relationships with small farms and specialty purveyors; write short “provenance cards” for dishes. Lead end-to-end execution: tastings, prep, packing, on-site production, plating, and impeccable service flow. Curate tabletop details (handcrafted ceramics/linens) and finishing touches that read as editorial luxury. Manage a small event team (assistants/servers) when required; set kitchen standards and timelines. Maintain rigorous food safety, costing, and post-event wrap (inventory, cleaning, feedback notes). Represent the brand with warmth and professionalism in client communications. Requirements/Responsibilities YOU ARE – A systems-minded chef who thrives under pressure and cares about mise en place, timing, and plate consistency. A storyteller: you can translate heritage, technique, and sourcing into a compelling guest experience. Calm, coachable, and hungry for growth; you take feedback and raise the bar every event. A gracious host—equally comfortable behind the pass or in front of guests. QUALIFICATIONS - 3–5+ years in fine dining, high-end catering, private chefing, or chef de partie/sous roles. Portfolio with plated dishes (link or PDF); sample menus welcome. ServSafe (or equivalent) required; valid driver’s license and reliable transport. Ability to lift 40 lbs and work evenings/weekends as events demand. Bonus: experience with tasting menus, wine pairings, fermentation/preservation, or open-fire cookery. Categories – Private Dining, Events, Luxury Events, Private Chef, Villa / Estate Chef Special Instructions Please do not send any emails, resumes, or call. We are making it really easy to apply for this position. Simply submit a ZippyApp application package which may include the Common Employment Application, Resume, and a Cover Letter. In your Cover Letter, please write a short paragraph describing yourself and why you would make a great addition to our team. ZippyApp is the Common Employment Application for online and mobile that allows you to apply for jobs with one click, and is being accepted at a growing number of businesses each day.

Job Description Serverfarm is a leading developer and operator of data centers with over 750+ locations and key customer relationships in 45 countries. We're revolutionizing how data centers operate across North America, Western Europe, and Israel, serving the world's leading technology and hyperscale companies. With Manulife Investment Management's acquisition in 2023 and our award-winning InCommand platform we're positioned for explosive growth as AI adoption and cloud migration drive unprecedented demand for data center capacity. A career at Serverfarm means being at the forefront of digital infrastructure innovation, where your work directly impacts how the world's data is managed and secured. As we target 4x growth over the next four years, you'll have unprecedented opportunities to take on new challenges, develop cutting-edge skills, and grow your career across our expanding global operations. Join our team of innovators and help shape the future of sustainable data centers while building a career without boundaries. Key Accountabilities • Ensure that all MEP plant and distribution infrastructure is operated and maintained in a safe manner, to best industry practice and within manufacturers recommendations., • Monitor power and environmental conditions within all critical spaces within the facility., • Perform assigned maintenance tasks in accordance with SF practices utilizing the internal CMMS., • Assist with planning and scheduling corrective maintenance activities, • Escort and support outside contractors, ensuring they are abiding SF work rules and processes, • Respond to site incidents, execute appropriate MOP/EOP documentation to resolve and/or mitigate issues and communicate to manage throughout event., • Support and follow all SF Change Control policies and procedures., • Perform site rounds and report any issues found to site management., • Participate in construction and commissioning activities as directed by site management, • Adhere to all local, state and federal safety laws and requirements, • Complete other duties as assigned by the management team, • Participate in and support MOP/SOP/EOP documentation process for site., • Participate in and support the development of site policies and standards, • Work with site team members to deliver 100% uptime of critical infrastructureRequired Skills, • High school diploma or equivalent, • Strong knowledge of electrical and mechanical systems, • Ability to read one-line diagrams and OEM documentation, • Experience working in a Data Center with proven success in delivering customer requirements in a critical technology environment, • Evidence of self-management and alignment with ever-changing priorities, • Good written and oral communication skills, tenacity, and working to a high level of accuracy, • Operating and maintaining chilled water-cooling systems, • Operating and maintaining DX cooling systems, • Operating and maintaining backup electrical systems such as UPS and generators, • Operating Building Management systems and Fire alarm and detection systems, • Building facility maintenance The listed salary range for this position is an estimate based on the competitive job market. Final compensation will be based on your own individual skills, experience, and location. The above statements are intended to describe the general nature and level of work being performed in this role. They are not intended to serve as an exhaustive list of all possible responsibilities and duties. We encourage you to apply even if your experience isn't an exact match to the job description. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Install Electrical and Electronic Control Systems and equipment, PLC’s, MCC’s, Lighting, Power supplies, Fire and Gas, and communications systems with minimal supervision. Basic troubleshooting and diagnostic skills of Electrical/Electronic issues relative to Control Systems and equipment. Install and maintain Lighting and Power distribution systems. Route, fabricate and install cable tray. Route, bend and install conduit runs. Gland and terminate cables. Hook up generators, transformers, MCC’s (Motor Control Center) Nav-Aids etc Demolition of cable and conduit runs Proficient in the use of tools of the trade Read drawings and P&ID’s Knowledge of industry standards, National Electrical Code and relevant Government regulations Recognize and avoid safety hazards and dangers All above functions performed with minimal supervision

Job Description HPC-Industrial, powered by Clean Harbors, in Deer Park, TX is looking for a Class A Driver / OTR Equipment Hauler (must drive manual transmission) to join their safety conscious team! 70% OTR driving, 30% local driving. TWIC card preferred or must be able to obtain. Flat bed experience a preferred! This team member is responsible for the safe and successful execution of jobs across all service lines and various other responsibilities. This position supports the local equipment hub in moving equipment to and from regional job sites. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. WORK LOCATION: Deer Park, TX PLEASE READ ALL KEY RESPONSIBILITIES/PHYSICAL DEMANDS - YOU MAY BE A GREAT FIT!!!! *MUST BE ABLE To Drive Manual Transmission vehicles. 30% driving / working locally, 70% OTR driving Forklift operations experience a plus! TWIC card is required! Duties include driving a flatbed, hauling heavy equipment OTR and locally. Experience driving in all types of weather relative to geographic location. • A respirator may need to be worn on certain sites and will be provided., • Forklift experience a plus!, • TWIC card is required., • Class A, no restrictions, must be able to drive manual transmission. Why work for HPC-Industrial? • Health and Safety is our #1priority and we live it 3-6-5!, • Competitive wages $30 - $35 hourly DOE, • Comprehensive health benefits coverage after 30 days of full-time employment, • Group 401K with company matching component., • Opportunities for growth and development for all the stages of your career, • Generous paid time off, company paid training and tuition reimbursement., • Positive and safe work environments RESPONSIBILITIES Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Perform routine maintenance on company equipment being used on the job. Transport equipment to and from customer locations. Completes pre and post trip inspections, driver’s logs and complies with all other vehicle policy and DOT requirements. Loading and unloading equipment. Perform other related duties as assigned. QUALIFICATIONS What does it take to work for HPC-Industrial? • Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs., • Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations., • Valid CDL Class A license, no restrictions. Must drive Manual transmission vehicles., • Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers., • Experience driving a flatbed truck, hauling equipment., • TWIC card preferred or must be able to obtain., • Availability to travel for extended periods of time. About HPC-Industrial: HPC-Industrial, powered by Clean Harbors, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at https://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ect@cleanharbors.com or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. #HPC

Job Description UNDERGROUND CONSTRUCTION DRIVER - CDL-A JOB DESCRIPTION Job Responsibilities include but are not limited to: • Load and drive equipment and material to job locations safely by the time needed, • Learn by shadowing and participating with all that is being asked within all aspects of the fire sprinkler trade, • Assist foreman with installation, service, and trouble-shooting of automatic fire sprinkler systems along with all its related equipment, • Assist foreman with installation of fire sprinkler systems in residential, commercial, and industrial buildings, • Learn and use project drawings to accurately and entirely interpret and installation requirement details and layout as needed, • Learn to thread and groove pipe, cut hanger rods, frequently climb ladders, hang pipe, read blueprints, layout, keep clean work area, and use appropriate equipment for any specific job such as tools, lifts, etc., • Other duties as assigned Expectations: • Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily, • Safety First, • Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc., • Ensure timely and accurate Incident and Accident Reporting, • Hold yourself accountable for all Safety Initiatives, • Hold yourself accountable for Safe Driving of Company Vehicles, • Ensure awareness and support of Stop Work Authority, • Fireline Installer, • Complete all Training Requirements – Safety, Certifications, etc., • Submit accurate Timesheet – job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal, • Ensure all required documents are complete, accurate and professional, with required signatures, • Ensure proper Inventory Management – review, update, and approve packing slips – submitted timely, proper material management, • Ensure proper Maintenance and care of equipment – trucks, lifts, tools, etc., • Keep jobsites clean and organized, • Ensure Production Efficiency – awareness of budget vs. actual labor hours and proactive communication with superintendent, • Support and Ensure Adherence to Company SOPs – Purchase Orders, Change Orders, etc., • Timeliness – at the job on time; attendance; communication with supervisor; paperwork, • Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities, • Maintain Quality Control i.e. reduce the need for return trips and warranty work, • Maintain a Professional appearance, • Communicate effectively and professionally within the department and with internal and external customers, • Teamwork – maintain positive interactions within your team, local office, etc., • Actively Participate in required team meetings, • Ability to work overtime, out of town or on-call as needed Knowledge: • Basic Math and Reading, • Minimum education of High School Diploma or Equivalent Work Experience: • 1+ years of driving and hauling equipment and material to jobsites, • 1 year of experience as a fire sprinkler, or construction related helper, preferred Skills and Competencies: • CDL-A required, • Ability to take direction from upper management, • Must have valid state driver's license and good driving record, • Self-motivated, Ambitious, Interactive, Communicative, Detail-oriented and Organized, • Demonstrate ability to accurately read measurements from tape or scales

Job Description If you are a traveling electrician who goes where the work is, likes big commercial projects, and wants to keep earning without wondering where the next job is coming from, this Traveling Journeyman Electrician opportunity was built for you. This is W2 employment, not independent contractor work. You get the earning opportunity that comes with traveling electrical work, including overtime and per diem for eligible employees, plus the stability and benefits of being a company employee. $45 to $48 per hour plus overtime at 1.5x plus daily workday per diem. Earn ~ $4,000 a week. Working six 10-hour days, total earnings potential is approximately $4,200 to $4,410 per week, or $218,000 to $229,000 annualized. Traveling Journeyman Electrician – Your Job Duties As a Traveling Journeyman Electrician, you will perform hands on commercial electrical work on site and work independently with limited supervision. You will: • Perform electrical installations, maintenance, and repairs on commercial and industrial projects (3/4” and 1” EMT), • Read and interpret blueprints, electrical plans, schematics, and electrical diagrams – data center new build installing fire electrical, • Perform layout and complete electrical installations, • Troubleshoot and diagnose electrical systems, equipment, and components, • Ensure electrical work complies with NEC requirements, safety regulations, and project specs, • Help direct and train Electrical Apprentices in the field as needed Traveling Journeyman Electrician – You Have (Required Skills, Experience & Team Fit) You have: • A valid Journeyman Electrician license, • Prior experience performing hands on commercial or industrial electrical work, • Strong knowledge of NEC codes and electrical regulations, • Experience reading electrical blueprints, schematics, plans, and diagrams, • Ability to successfully complete required pre employment background and drug screening You might have: • Prior experience as a Lead Electrician or directing Electrical Apprentices, • OSHA 10 or OSHA 30 certification, • Prior experience working on data center projects or other large scale commercial / industrial Traveling Journeyman Electrician – Benefits for You You will be hired as a W2 employee rather than an independent contractor, giving you access to company benefits including health insurance, paid holidays and benefit package. After the current project concludes, there is an opportunity to keep traveling with the company and continue onto another project in New Mexico anticipated to last approximately 18 months.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Lead Industrial Electrician to provide hands-on leadership and technical direction within our electrical integration team. The Lead Industrial Electrician will lead and support a team responsible for the electrical installation, wiring, and integration of equipment within custom metal buildings and enclosures. This position will ensure electrical installations are completed safely, accurately, and in accordance with engineering drawings, customer specifications, Panelmatic standards, and applicable NEC codes. The Lead Industrial Electrician will coordinate daily work activities, provide technical guidance to team members, inspect completed work, troubleshoot issues, and help ensure projects remain on schedule. The Lead Industrial Electrician will remain hands-on in the installation and integration process while serving as a technical resource and leader for the team. Job Duties: • Provide day-to-day direction, guidance, and technical support to Electrical Integration Technicians., • Help coordinate daily assignments and prioritize work based on project schedules and production requirements., • Lead by example and maintain high standards for safety, quality, productivity, and workmanship., • Train, coach, and mentor team members on electrical installation practices, tools, equipment, and Panelmatic standards., • Assist with onboarding and training new employees., • Monitor team progress and communicate project status, delays, material shortages, or technical concerns to the appropriate Supervisor or Production Manager., • Help identify and resolve production issues that could impact project schedules or quality., • Work closely with Engineering, Production, Quality, and other departments to resolve installation and technical issues., • Provide hands-on assistance with complex electrical installations and difficult integration tasks., • Consult blueprints, work orders, schematics, one-line diagrams, and engineering drawings to safely construct and integrate electrical systems., • Interpret customer specifications and engineering requirements to determine proper installation methods., • Perform and oversee conduit bending, threading, and installation, including EMT, RGS, and RAL., • Design and install conduit systems within space restrictions in accordance with one-line diagrams, NEC requirements, and customer specifications., • Install electrical panels, breakers, fuses, disconnects, and related electrical equipment., • Install and terminate electrical wiring, outlets, switches, junction boxes, terminal boards, and wall boxes., • Install electrical systems including security systems, fire detection systems, UPS systems, and other building or equipment systems., • Install fiber optic cable, communication lines, power systems, and other electrical infrastructure as required., • Install electrical components in buildings, machinery, computers, equipment, and custom enclosures., • Install heating and cooling electrical systems in industrial buildings and enclosures., • Install cable tray and open wiring systems., • Install utility fixtures, outlets, terminal boards, switches, and wall boxes using appropriate hand and power tools., • Cut openings and drill holes for fixtures, outlet boxes, fuse holders, panels, and other electrical components., • Measure, cut, and install frameworks and supports for conduit, control panels, junction boxes, and other electrical devices., • Connect electrical systems to power sources in accordance with applicable electrical requirements., • Use mechanical, electrical, and hydraulic conduit benders to complete installations., • Ensure electrical systems are properly grounded and installed according to applicable NEC requirements., • Use test meters, meggers, and other diagnostic equipment to test and troubleshoot electrical systems., • Consult with engineers, engineering technicians, line installers, industrial machinery mechanics, and other technical personnel when required., • Identify installation discrepancies and communicate required corrections to the appropriate personnel., • Inspect completed electrical work to ensure installations meet drawings, specifications, Panelmatic standards, and applicable codes., • Verify wiring, conduit, equipment, and components are installed correctly before requesting inspection., • Notify the appropriate Lead, Supervisor, or Inspector when work is ready for inspection, as applicable., • Assist with troubleshooting and correcting inspection findings., • Maintain a clean, organized, and safe work area throughout the workday., • Ensure tools, equipment, materials, and work areas are properly maintained and returned to their designated locations., • Follow all company safety policies, procedures, and required PPE requirements., • Promote a culture of safety and accountability among team members., • Assist leadership in monitoring project progress and identifying potential schedule concerns., • Help ensure materials and components are available when needed to maintain production flow., • Review work completed by team members and provide guidance when corrections are needed., • Assist with final electrical assembly, testing, and preparation for customer inspection or shipment., • Perform additional duties as assigned to support project completion and overall production goals. Requirements • Industrial Electrical Certification preferred, • 4+ years of experience in industrial electrical installation, electrical integration, industrial construction, or a related field., • Forklift certification preferred, • Experience in RIE and PEC Building preferred, • Experience in Electrical Racks preferred, • Extensive knowledge and comprehension of NEC and UL codes preferred, • Extensive knowledge of conduit bending preferred, • High school diploma or equivalent required, • Three plus years of experience in industrial electrical in a manufacturing environment required, • Three plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, conduit bender, etc.) required, • Knowledge of NEC codes and comprehension of general electrical standard required, • Three plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • Excellent communication skills both written and verbal required, • Ability to convert decimals to fractions and utilize conversion charts required, • Ability to read a tape measure and prints required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Excellent color vision and eyesight required, • Alignment with company core values required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid by Panelmatic for employee-only coverage, • 80% Panelmatic-paid / 20% employee-paid dependent coverage, • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and professional development, • PTO and paid holidays, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Lead Industrial Electrician to provide hands-on leadership and technical direction within our electrical integration team. The Lead Industrial Electrician will lead and support a team responsible for the electrical installation, wiring, and integration of equipment within custom metal buildings and enclosures. This position will ensure electrical installations are completed safely, accurately, and in accordance with engineering drawings, customer specifications, Panelmatic standards, and applicable NEC codes. The Lead Industrial Electrician will coordinate daily work activities, provide technical guidance to team members, inspect completed work, troubleshoot issues, and help ensure projects remain on schedule. The Lead Industrial Electrician will remain hands-on in the installation and integration process while serving as a technical resource and leader for the team. Job Duties: • Provide day-to-day direction, guidance, and technical support to Electrical Integration Technicians., • Help coordinate daily assignments and prioritize work based on project schedules and production requirements., • Lead by example and maintain high standards for safety, quality, productivity, and workmanship., • Train, coach, and mentor team members on electrical installation practices, tools, equipment, and Panelmatic standards., • Assist with onboarding and training new employees., • Monitor team progress and communicate project status, delays, material shortages, or technical concerns to the appropriate Supervisor or Production Manager., • Help identify and resolve production issues that could impact project schedules or quality., • Work closely with Engineering, Production, Quality, and other departments to resolve installation and technical issues., • Provide hands-on assistance with complex electrical installations and difficult integration tasks., • Consult blueprints, work orders, schematics, one-line diagrams, and engineering drawings to safely construct and integrate electrical systems., • Interpret customer specifications and engineering requirements to determine proper installation methods., • Perform and oversee conduit bending, threading, and installation, including EMT, RGS, and RAL., • Design and install conduit systems within space restrictions in accordance with one-line diagrams, NEC requirements, and customer specifications., • Install electrical panels, breakers, fuses, disconnects, and related electrical equipment., • Install and terminate electrical wiring, outlets, switches, junction boxes, terminal boards, and wall boxes., • Install electrical systems including security systems, fire detection systems, UPS systems, and other building or equipment systems., • Install fiber optic cable, communication lines, power systems, and other electrical infrastructure as required., • Install electrical components in buildings, machinery, computers, equipment, and custom enclosures., • Install heating and cooling electrical systems in industrial buildings and enclosures., • Install cable tray and open wiring systems., • Install utility fixtures, outlets, terminal boards, switches, and wall boxes using appropriate hand and power tools., • Cut openings and drill holes for fixtures, outlet boxes, fuse holders, panels, and other electrical components., • Measure, cut, and install frameworks and supports for conduit, control panels, junction boxes, and other electrical devices., • Connect electrical systems to power sources in accordance with applicable electrical requirements., • Use mechanical, electrical, and hydraulic conduit benders to complete installations., • Ensure electrical systems are properly grounded and installed according to applicable NEC requirements., • Use test meters, meggers, and other diagnostic equipment to test and troubleshoot electrical systems., • Consult with engineers, engineering technicians, line installers, industrial machinery mechanics, and other technical personnel when required., • Identify installation discrepancies and communicate required corrections to the appropriate personnel., • Inspect completed electrical work to ensure installations meet drawings, specifications, Panelmatic standards, and applicable codes., • Verify wiring, conduit, equipment, and components are installed correctly before requesting inspection., • Notify the appropriate Lead, Supervisor, or Inspector when work is ready for inspection, as applicable., • Assist with troubleshooting and correcting inspection findings., • Maintain a clean, organized, and safe work area throughout the workday., • Ensure tools, equipment, materials, and work areas are properly maintained and returned to their designated locations., • Follow all company safety policies, procedures, and required PPE requirements., • Promote a culture of safety and accountability among team members., • Assist leadership in monitoring project progress and identifying potential schedule concerns., • Help ensure materials and components are available when needed to maintain production flow., • Review work completed by team members and provide guidance when corrections are needed., • Assist with final electrical assembly, testing, and preparation for customer inspection or shipment., • Perform additional duties as assigned to support project completion and overall production goals. Requirements • Industrial Electrical Certification preferred, • 4+ years of experience in industrial electrical installation, electrical integration, industrial construction, or a related field., • Forklift certification preferred, • Experience in RIE and PEC Building preferred, • Experience in Electrical Racks preferred, • Extensive knowledge and comprehension of NEC and UL codes preferred, • Extensive knowledge of conduit bending preferred, • High school diploma or equivalent required, • Three plus years of experience in industrial electrical in a manufacturing environment required, • Three plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, conduit bender, etc.) required, • Knowledge of NEC codes and comprehension of general electrical standard required, • Three plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • Excellent communication skills both written and verbal required, • Ability to convert decimals to fractions and utilize conversion charts required, • Ability to read a tape measure and prints required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Excellent color vision and eyesight required, • Alignment with company core values required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid by Panelmatic for employee-only coverage, • 80% Panelmatic-paid / 20% employee-paid dependent coverage, • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and professional development, • PTO and paid holidays, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description Provide direct nursing care to the residents according to established policies and procedures and to ensure that the highest degree of quality care is always maintained.  Assist residents with all aspects of activities of daily living which includes: toileting at least every 2 hours and prn, offering bed pans and urinal, bathing, grooming, dressing, mouth care, shaving, skin care, turning and repositioning every 2 hours and prn, peri-care, keeping skin dry and odor free, assist/feed residents as needed, provide fresh water and encourage fluid intake, keep hearing aids, denture and eyeglasses clean, functional and in place.  Promptly and courteously answers call lights to determine residents' needs within 5 minutes.  Transports residents or assists residents to walk.  Makes bed and handles all linen in appropriate manner to prevent spread of infections.  Uses assistive devices such as hand rolls, pads, pillows, splints, ted hose, etc. to maintain positioning and proper body alignment of residents.  Takes and records vital signs, weights, and food and fluid intake and output, as directed.  Gives catheter care as required.  Attends a minimum of 12 mandatory in-services per year.  Other duties as assigned, with or without reasonable accommodations, to assist in maintaining quality standards and maintaining the facility as a viable and successful entity.  Use gait belt for all patient transfers and ambulation. Ask for help when needed. Utilize good body mechanics.  Release restrained residents according to procedure.  Report all incidents and accidents immediately.  Correct all unsafe and hazardous conditions and equipment immediately.  Make use of appropriate protective devices/clothing on hand for handling infectious waste and or body/blood fluids.  Ensure that all rooms on your assignment are maintained in a clean and sanitary manner.  Keep hallways clear of clutter. All carts to the same side of the hall.  Participate in all fire safety and disaster preparedness drills in a safe and professional manner.  Can verbalize the process of emergency procedures, fire drills, evacuation procedure, etc. Knows location of fire alarms, extinguishers, and exits.  Knows location of MSDS manuals. Keeps chemicals and hazardous materials stored in a locked area.  Utilize infection control and universal precautions to assure that a sanitary environment is always maintained and that aseptic and isolation techniques are followed. Page 2 Care Plan and Assessment Functions Qualifications Physical, Cognitive and Sensory Requirements Expectations  Is aware of resident’s rights and abides by them.  Assure the residents' property and personal rights are always followed, including knocking before entering the resident’s room, using privacy curtains, etc.  Treats residents fairly, with kindness, dignity, and respect.  Greet newly admitted/transferred residents and introduce yourself.  Wears nametag, where residents, visitors, and management can see it throughout the day.  Participate in the comprehensive assessment of the nursing needs of each resident in your assigned area.  Review the residents care plan for information needed to provide appropriate resident care.  Must be certified as a nursing assistant, by the department of Health, within four months of date of hire.  Must be able to move intermittently throughout the workday.  Ability to remain calm under stress.  Must function independently, have flexibility, personal integrity, and the ability to work effectively with residents, personnel, and support agencies.  Ability to demonstrate patience, tact, courtesy, enthusiasm, and a positive attitude.  Must be able to relate to and work with the ill, disabled, elderly, emotionally upset, and at times hostile residents within the facility.  Ability to read and write in English.  Must be able to lift and transfer a minimum of 50 pounds.  Be professional, supportive, and kind to internal and external constituents  Remain loyal and confidential to staff, residents, and owner  Keep the corporate office apprised of situations that could negatively impact the facility  Ensure only positive information is mentioned to all contacts of the facility, prospective residents, staff, sales staff, and inspection teams, etc.

Job Family Group: Engineering Group Job Description: About Archaea bp is committed to investing in lower carbon energy so we can meet our ambition to reach net zero by 2050. And while we’re still mostly in oil and gas today, bioenergy is one of our five transition growth engines and a key focus to help us support the global energy transition. Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. The team operates around 50 sites in 32 states with a robust development pipeline. About the role The Design Engineer is responsible for 3D design and creation of technical drawings for landfill gas to energy facilities (LFGTE) and Renewable Natural Gas (RNG) skid equipment, compression packages as-built drawings, & modification drawings using SolidWorks and AutoCAD. Key accountabilities • Design responsibility of LFGTE and RNG BTU skid equipment using SolidWorks and AutoCAD., • Create or revise accurate, detailed SolidWorks CAD models, drawings, P&ID drawings, BOM’s, and other engineering documentation as required., • Performs design calculations for pipe sizes. Assist in procurement of mechanical equipment and instrumentation to support operations., • Maintains knowledge of the ASME Process Piping Design, Materials, Fabrication and Specifications leading to fabrication and assembly documents., • Maintains current knowledge of the latest codes, standards and best practices to encourage Mechanical safety for personnel and equipment protection., • Approaches designs with safety and long-term serviceability as top priorities., • Responsible for proper interpretation of design specifications and drawings and preparation of project specification., • Prepare BOM, Instrumentation list & design specs., • Collaborate with design team to meet equipment specifications and deadlines., • Provide engineering support to operations (LFGTE and RNG) in design and maintenance areas., • Managing the drawings/documentation control in PDM. Essential education • Bachelor’s degree in Mechanical Engineering or Associates Degree in Mechanical Design Essential experience • 3+ years of experience, • Experience with Autodesk (or AutoCAD), • Experience with SolidWorks, • Experience with MS Office Suite, • Experience with Geometric Dimensioning and Tolerance, ANSI Y14.5., • Thoroughness / attention to detail, • Requires the ability to be self-motivated and work independently as well as in multi-skilled team environment, • Must possess a valid driver’s license., • Must pass background check and drug test. Desirable criteria • Experience with Bluebeam, • Experience with SolidWorks Routing, • Experience designing natural gas processing and treating equipment, • Experience creating technical manuals associated with equipment, • Experience working with Process Industry Practices (PIP), • Experience with ASME, API, AISC, OSHA & ASTM standards Why join us? Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today’s energy system and build out tomorrow’s, apply today! How much do we pay? $94,500 - $135,000. *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting. This position offers paid vacation depending on your years of relevant industry experience and will range from 120 – 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays. You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at . Bp has a parental leave policy as well, which offers up to 8 weeks’ paid leave for the birth or adoption of a child. Learn more at . Join our industry-leading team and you’ll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to: • Discretionary Annual Bonus Program, • 401K Program, • Quarterly Momentum Bonus, • Health, Vision, And Dental Insurance, • Life Insurance, • Short-Term Disability, • Long-Term Disability But above all? You’ll play a key part in helping bp deliver our ambition – to be a net zero company by 2050 or sooner and help the world get to net zero. Apply today! Travel Requirement: Up to 10% travel should be expected with this role Relocation Assistance: This role is not eligible for relocation Remote Type: This position is a hybrid of office/remote working Skills: Agility core practices, Agility core practices, Analytical Thinking, Asset Life Cycle Management, Automation system digital security, Commercial Acumen, Communication, Competency Management, Creativity and Innovation, Digital Fluency, Earthing and grounding systems, Electrical operational safety, Factory acceptance testing, Financial Management, Fire and gas philosophy, Functional Safety, Hazard Identification, Hazard identification and protection layer definition, Instrument and protective systems, Management of Change, Network Technologies, Project Commissioning, Project Management, Safe and reliable operations, Safety critical equipment {+ 2 more} . Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please _. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Job DescriptionDescriptionFuel and wash the equipment as needed. Fuel equipment and check the fluid levels. The incumbent in this position is expected to model the following practices daily: • Demonstrate alignment with the company's mission and core business values;, • Collaborate with key internal/external resources;, • Participate in ongoing self-development. Essential Functions • Fuel vehicles as required, • Wash and clean equipment, • Deliver outstanding customer service, • Fuel trucks as required, • Wash trucks as needed, • Ensure proper levels of fuel are maintained at all times, • Comply with all safety, DOT and OSHA guidelines, • Adhere to company rules and regulations, • Shuttle vehicles when necessary, • Ensure cleanliness of shop and surrounding areas, • Perform other tasks as directed be Service Manager or Immediate Supervisor, • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission., • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards., • Performs other duties assigned. Knowledge, Skills, and Abilities • General knowledge of trucking industry helpful., • Good communication skills, • Customer service skills. RequirementsEducation and Experience: • High school diploma or equivalent required. Supervisory Responsibilities: None Travel:None Physical Requirements: • Employee is required to stand, walk, kneel, squat, crawl, bend and twist., • Employee may have to climb and/or lift up to and over 80 pounds frequently., • Visual requirements are constant. Work Environment:, • Duties are performed throughout the inside and outside of the building(s)., • Employee is exposed to dirt, dust, heat, cold, noise and vibration, fumes and odors, wetness and humidity and sometimes darkness., • Due to the nature of the environment, employee is exposed to potential mechanical, chemical, electrical and fire hazards on a regular basis. Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description We are seeking an experienced Fire Sprinkler Foreman to lead field installation crews and ensure high‑quality, code‑compliant fire sprinkler system installations. This role requires a knowledgeable, organized, and safety‑driven leader who can manage people, materials, and daily production while maintaining strong communication with project managers, inspectors, and general contractors. Position Overview The Fire Sprinkler Foreman oversees all on‑site installation activities for commercial, industrial, and residential fire sprinkler projects. This includes coordinating manpower, reading plans, ensuring proper installation methods, maintaining safety standards, and delivering work on schedule. The ideal candidate is a hands‑on leader who understands NFPA requirements, anticipates project needs, and keeps crews productive and aligned. Key Responsibilities • Lead fire sprinkler installation crews on commercial, industrial, and residential projects., • Read and interpret plans, specifications, and NFPA codes., • Plan daily work, set production goals, and maintain job pacing., • Ensure proper installation of piping, hangers, heads, valves, and related components., • Coordinate materials, tools, equipment, inspections, and subcontractors., • Maintain strict safety standards and enforce company and OSHA requirements., • Communicate progress, issues, and needs with project managers and inspectors., • Troubleshoot installation challenges and ensure high‑quality workmanship., • Complete daily reports, track production, and maintain accurate documentation. Qualifications • 5+ years of fire sprinkler installation experience; foreman or lead installer experience preferred., • Strong knowledge of NFPA standards, fire codes, and proper installation practices., • Ability to read blueprints, layout systems, and plan work efficiently., • Proven leadership skills with the ability to manage crews and maintain productivity., • Experience with steel, CPVC, and other fire sprinkler piping systems., • Strong communication, problem‑solving, and organizational abilities., • Valid driver’s license; ability to travel to job sites as needed., • NICET certification is a plus. What Success Looks Like A successful Fire Sprinkler Foreman delivers safe, code‑compliant installations, keeps crews productive, anticipates material and inspection needs, solves problems early, and maintains strong communication throughout the project. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Reports To - President and CEO Direct Reports - Operations and Production Director, Technology Director, Audience Services Manager Status - Regular Full-Time Exempt Location - On site in Downtown Houston, TX, with flexibility for occasional remote work Schedule - General business hours with some nights and weekends OVERVIEW The Vice President of Operations is a senior leadership role holding responsibility for elements of strategic, financial, and operational performance of the Hobby Center for the Performing Arts. Reporting to the President and CEO and serving as a member of the Senior Leadership Team, this position functions as the organization’s operations leader, ensuring that the campus, systems, people, and technology support a best-in-class performing arts experience for artists, audiences, staff and volunteers. The Vice President of Operations provides leadership across production, audience services, technology, engineering, security, parking, concessions, facility operations, maintenance, and capital projects. The role directly supervises the Operations and Production Director, Technology Director, and Audience Services Manager and indirectly leads a department that has grown to 25 full-time employees and 50+ part-time employees. The successful candidate will be a strategic, collaborative, and execution-oriented leader who can strengthen operational systems, lead high-performing teams, steward major physical assets, and support the continued growth and development of a major nonprofit performing arts center. MAJOR FUNCTIONS Leadership and Organizational Strategy • Serve as a strategic partner to the President and CEO and a member of the Senior Leadership Team, helping define organizational priorities, operational strategy, and long-term institutional capacity., • Translate strategic goals into practical operating plans, systems, policies, and accountability structures that support a growing, complex performing arts organization., • Provide operational and financial leadership that ensures reliable daily operations, strong internal coordination, fiscal discipline, and excellent stewardship of organizational resources., • Represent the operations function in organizational planning, board and committee work, stakeholder engagement, tenant relations, and community or civic partnerships, as needed. Production and Event Services • Oversee comprehensive front-of-house and back-of-house operations, including production, stage operations, event services, security, parking, as well as food and beverage operations., • Ensure the Hobby Center delivers a seamless, safe, welcoming, and high-quality experience for audiences, artists, resident companies, rental clients, volunteers, staff, vendors, and community users., • Strengthen communication and coordination among operational departments and across the organization to ensure timely response to production needs, event schedules, patron issues, tenant requirements, and facility demands., • Maintain effective systems for event documentation, facility readiness, incident reporting, event reporting, and post-event evaluation. Facilities, Safety, Compliance, and Capital Projects • Oversee all building services including engineering, maintenance, security, and technology., • Lead long-range capital planning, facility stewardship, preventative maintenance, restoration projects, infrastructure improvements, and major capital initiatives in alignment with organizational priorities., • Ensure the campus, equipment, building systems, and public spaces are maintained to the highest standards of safety, reliability, accessibility, efficiency, and presentation., • Implement, evaluate, revise, and enforce safety, emergency preparedness, risk management, accessibility, and security procedures for the venue and garage., • Partner with appropriate local, state, and federal agencies and consultants to ensure compliance with applicable codes, licenses, permits, fire regulations, life-safety standards, and legal requirements, as well as in planning for major events and any identified security threats. Financial Management, Contracts, and Vendor Relations • Develop, manage, and monitor annual department budgets, capital budgets, project budgets, and operational forecasts with attention to cost discipline, service quality, and long-term sustainability., • Manage, negotiate, and execute contracts for venue operations, maintenance, capital projects, and other operational services in coordination with organizational policies and legal review as needed., • Oversee key vendor relationships, including parking, security, food and beverage, maintenance, technology, engineering, and other outsourced services., • Identify opportunities to improve efficiency, strengthen internal controls, enhance service delivery, and support earned revenue opportunities without compromising mission or guest experience. People Leadership and Culture • Lead, coach, and develop direct reports and operational teams, setting clear expectations, strengthening accountability, and fostering a collaborative, professional, and safe work environment., • Carry out supervisory responsibilities in accordance with Hobby Center policies and applicable laws, including interviewing, hiring, training, planning, assigning work, evaluating performance, supporting professional growth, and addressing performance concerns., • Build positive relationships with staff, resident companies, tenants, vendors, board members, donors, volunteers, patrons, public officials, and community users., • Model integrity, transparency, sound judgment, calm decision-making, and service-oriented leadership in a dynamic environment that includes performances, rentals, public events, and capital activity. Responsibilities may be modified as needed to meet the organizational goals and employee strengths. TRAITS AND CHARACTERISTICS You Are • A seasoned operational executive who understands the complexity of a major performing arts venue and can lead both strategy and execution., • A calm, decisive, and solutions-oriented leader who can manage competing priorities, urgent issues, and high-volume event activity with sound judgment., • A collaborative partner who builds trust across departments, vendors, artists, tenants, public agencies, board members, donors, patrons, and community stakeholders., • A strong communicator who can quickly translate needs into action, provide clear direction, and keep teams aligned around shared goals., • A people-centered manager who develops leaders, holds teams accountable, and creates conditions for staff to do excellent work in a sustainable way. We Are • An established, stable, mission-driven nonprofit performing arts center engaged in an exciting period of growth, transformation, and expanded community impact., • A complex, high-visibility cultural institution with a large annual operating budget, significant public attendance, resident company relationships, touring productions, rentals, educational programs, accessibility initiatives, and major capital priorities., • Committed to creating a welcoming, inclusive workplace that embraces diversity of people and ideas and fosters a sense of belonging., • A high-performance, collaborative culture that supports professional growth, accountability, innovation, and operational excellence. Skills and Qualifications • Significant senior leadership experience in venue operations, performing arts, live entertainment, hospitality, cultural facilities, convention/event centers, or a similarly complex public-facing operating environment., • Demonstrated ability to lead large, multi-disciplinary teams and supervise department leaders across production, facilities, audience services, technology, security, parking, concessions, or related functions., • Experience developing and managing operating and capital budgets, negotiating contracts, overseeing vendors, and exercising strong financial judgment., • Strong understanding of safety, emergency preparedness, risk management, compliance, accessibility, building systems, event operations, and public assembly venue standards., • Proven project management skills, including the ability to lead capital improvements, maintenance initiatives, cross-functional projects, and process improvements from planning through completion., • Excellent written and verbal communication skills, with the ability to work effectively with staff, board members, donors, volunteers, patrons, resident companies, rental clients, public officials, and community partners., • High proficiency with Microsoft Office and comfort using technology, data, and operating systems to support decision-making, communication, reporting, and accountability. Team members at the Hobby Center for the Performing Arts must thrive on challenge and be comfortable working in a dynamic, fast-paced environment. Working with a nimble and efficient team requires that leaders bring an entrepreneurial spirit, a commitment to collaboration, and the ability to provide steady leadership across a broad scope of work. COMPENSATION The Hobby Center offers a competitive compensation and benefits package including medical, dental, vision, life, disability, a 403b savings plan with matching employer contributions, mobile phone stipend, parking, and paid time off. The anticipated hiring range for this position is $150,000-$175,000 base compensation annually. A performance-based incentive program is provided as well. ABOUT THE HOBBY CENTER FOR THE PERFORMING ARTS The Hobby Center for the Performing Arts deepens understanding of our shared humanity. By presenting engaging performances and educational programs, we strengthen our sense of belonging and help shape a more cohesive and connected Houston community. Opened in 2002, the Hobby Center campus includes the 2,650-seat Sarofim Hall and the 500-seat Zilkha Hall. Delivering a best-in-class patron experience, the Hobby Center welcomes more than 400,000 audience members annually for high-quality arts programming, including the Memorial Hermann Broadway at the Hobby Center series, a full season of musical theatre produced by Principal Resident Company Theatre Under the Stars, and a wide range of performances from Houston-based and touring artists and companies. Education, accessibility, and community engagement are central to the Hobby Center’s impact through programs such as the ExxonMobil Discovery Series, Sensory Inclusive performances, and exemplary customer service through the Access Team. The organization is implementing a strategic plan that expands its role in the Houston arts community and advances a new era of growth, access, and civic impact. The Hobby Center for the Performing Arts is an equal opportunity employer where equity, diversity, inclusion, and accessibility are deeply valued.

Job Description We are seeking skilled and experienced Journeyman Electricians with expertise in commercial construction. The ideal candidates will be responsible for installing, maintaining, and repairing electrical systems, with a strong focus on working with conduit pipe and ensuring compliance with safety and building codes. Key Responsibilities: • Install, repair, and maintain electrical systems in commercial construction projects., • Work with various types of conduit pipe, including EMT, PVC, and rigid conduit., • Read and interpret blueprints, electrical schematics, and technical drawings., • Perform wiring, grounding, and panel installations according to code requirements., • Test electrical systems and components for safety, efficiency, and compliance., • Troubleshoot electrical issues and perform necessary repairs., • Ensure all work meets NEC (National Electrical Code) and local regulations., • Collaborate with other trades and contractors to complete projects on time., • Maintain a safe and organized work environment, adhering to OSHA guidelines. Qualifications:, • High school diploma or equivalent., • Valid Journeyman Electrician license. (Varies by State), • Minimum of 5 years of experience in commercial electrical work., • Extensive experience working with conduit pipe and electrical installations., • Strong knowledge of NEC and local electrical codes., • Ability to read and interpret blueprints and electrical diagrams., • Excellent problem-solving and troubleshooting skills., • Ability to lift and carry heavy equipment and work in various environmental conditions., • Valid driver’s license., • Ability to pass background check. Preferred Skills:, • Experience with fire alarm systems, lighting controls, and emergency power systems., • Ability to operate power tools and testing equipment., • Strong attention to detail and organizational skills., • Effective communication and teamwork abilities. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job DescriptionWith over 19 years of experience and hundreds of million-dollar projects completed, Hays Electrical Services provides excellent service to customers in industries hospitality, commercial and solar. Hays Electrical Services approaches each project with a cooperative mindset, working with business owners, contractors, and subcontractors towards the common goal – successful project delivery. Position Overview We’re looking for a top-tier Healthcare Electrical Superintendent. This is not an entry-level superintendent position. We are looking for someone who has successfully led large healthcare electrical projects and understands the unique challenges of working in active hospital environments where patient safety and continuous operation are the highest priorities. Required Experience The ideal candidate will have extensive experience with: • Ground-up hospital construction, • Hospital renovations and occupied healthcare facilities, • Patient care and non-patient care environments, • Active hospital shutdowns and electrical cutovers, • Developing and executing MOPs Methods of Procedure/Operations, • Strategic planning to minimize disruptions to hospital operations, • Generator systems, emergency power, and critical branch distribution, • Working in operating rooms ORs, Cath Labs, MRI suites, CT rooms, Imaging Departments, Emergency Departments, ICU, NICU, Labor & Delivery, and other specialty healthcare spaces, • Patient headwalls and medical equipment rough-in, • Healthcare electrical systems in accordance with NEC Article 517 and applicable healthcare standardsTechnical Knowledge Candidates should have strong knowledge of: • Fire Alarm Systems, • Nurse Call Systems, • Telecommunications, • Security and Access Control, • Lighting Controls, • Normal and Emergency Power Distribution, • Critical Branch and Life Safety Systems, • Equipment coordination and commissioning, • Prefabrication planning and implementation, • QA/QC and high-quality installationsLeadership Expectations We’re looking for a leader who can: • Successfully lead crews of up to 50 electricians, • Drive manpower production while maintaining quality and safety, • Plan work several weeks ahead and stay ahead of schedule, • Coordinate effectively with Project Managers, Owners, Inspectors, and General Contractors, • Conduct planning meetings and daily coordination with hospital staff, • Mentor foremen and develop field leadership, • Maintain excellent communication with clients and project teams, • Solve problems proactively instead of reacting to themPreferred Qualifications, • Extensive healthcare electrical construction experience, • Strong understanding of infection control requirements ICRA and working in occupied healthcare environments, • Experience with shutdown planning and execution, • Experience with commissioning and turnover processes, • Strong blueprint and specification reading skills, • Strong prefab experience and ability to drive field efficiencies, • OSHA 30 preferred, • Ability to build schedules, manpower plans, and execute projects with minimal supervision Benefits: · Competitive salary commensurate with experience. · Comprehensive benefits package, including health, dental, and retirement plans. · Opportunities for professional growth and advancement within a rapidly expanding company. · Collaborative and supportive work environment. If you meet the qualifications outlined above and are ready to contribute your skills to the team at Hays Electrical Services, we encourage you to apply. Join us in providing exceptional service to our clients and supporting our company's operations. Apply now! Powered by JazzHR AAw223tjgg

Job Description We are seeking skilled and experienced Apprentice and Journeyman Electricians with expertise in commercial construction. The ideal candidates will be responsible for installing, maintaining, and repairing electrical systems, with a strong focus on working with conduit pipe and ensuring compliance with safety and building codes. Key Responsibilities: • Install, repair, and maintain electrical systems in commercial construction projects., • Work with various types of conduit pipe, including EMT, PVC, and rigid conduit., • Read and interpret blueprints, electrical schematics, and technical drawings., • Perform wiring, grounding, and panel installations according to code requirements., • Test electrical systems and components for safety, efficiency, and compliance., • Troubleshoot electrical issues and perform necessary repairs., • Ensure all work meets NEC (National Electrical Code) and local regulations., • Collaborate with other trades and contractors to complete projects on time., • Maintain a safe and organized work environment, adhering to OSHA guidelines. Qualifications:, • High school diploma or equivalent., • Valid Apprentice or Journeyman Electrician license. (Varies by State), • Minimum of 5 years of experience in commercial electrical work., • Extensive experience working with conduit pipe and electrical installations., • Strong knowledge of NEC and local electrical codes., • Ability to read and interpret blueprints and electrical diagrams., • Excellent problem-solving and troubleshooting skills., • Ability to lift and carry heavy equipment and work in various environmental conditions., • Valid driver’s license., • Ability to pass background check. Preferred Skills:, • Experience with fire alarm systems, lighting controls, and emergency power systems., • Ability to operate power tools and testing equipment., • Strong attention to detail and organizational skills., • Effective communication and teamwork abilities. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job Description This position will be for the Houston area. • Service and inspect fire alarm systems, • Test fire alarm systems to ensure they are in proper working order, • Troubleshoot and repair problems with fire alarm systems, • Conduct routine maintenance on fire alarm systems, • Program fire alarm systems using software, • Keep accurate records of all fire alarm system inspections and repairs, • Provide training to customers on fire alarm systems SKILLS: • Ability to read and interpret schematics and wiring diagrams, • Ability to troubleshoot and repair fire alarms, • Knowledge of fire safety codes and standards, • Knowledge of electrical theory and wiring techniques Requirements • Must have state FAL certification in fire alarm systems, • Ability to troubleshoot and repair fire alarm systems, • Knowledge of applicable fire codes and standards, • Ability to read and interpret blueprints and schematics, • Knowledge of electrical systems and equipment Benefits Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, data center, environmental, food & beverage, pulp & paper, material handling, oil & gas, pharmaceutical, renewables, metals, and utility markets. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and skilled Fitter Welder. The Fitter Welder owns the complete build of a base — from drawing review and material layout through fit-up, welding, floor plate, and final inspection. This is a dual-skill classification: the employee must be able to read and execute the drawing package as a fitter and produce sound, code-quality welds as a welder. The defining expectation of this role is the ability to take a drawing package and independently produce a finished, inspection-ready base without step-by-step direction. Combination Welder/Fitters are the primary staffing unit for each fabrication line and are expected to identify and correct their own discrepancies before a base is considered complete. Combination Welder/Fitters progress through defined tiers (I–III) based on demonstrated drawing comprehension, layout and fit-up accuracy, weld quality, and independence. Job Duties: Drawing & BOM Identification • Review and understand the drawing package before beginning work., • Identify the Bill of Materials (BOM) and locate all required components., • Identify the steel/material type, size, quantity, and weight, and verify they match the drawing and BOM., • Identify and understand standard weld symbols, weld sizes and dimensions, drawing notes, general dimensions and tolerances, and miscellaneous parts and components shown in the drawing package. Material Layout & Preparation • Verify material before fabrication., • Lay out all required dimensions for lifting lugs, ground pads, holes and drilled locations, and other components identified on the drawing., • Drill holes according to the dimensions and notes provided in the drawing package., • Cut channel and other material as required to match the drawing., • Properly identify and prepare the floor plate. Fit-Up • Position and fit components according to the drawing., • Ensure the assembly is square, level, properly aligned, and within required dimensions., • Tack weld components using appropriate procedures and sequence., • Verify dimensions and alignment before final welding., • Correct fit-up issues before proceeding. Welding • Follow weld symbols, weld sizes, and drawing notes., • Select and use the appropriate welding process and settings for the material and application., • Weld components in the proper sequence to minimize distortion., • Grind welds smooth where required by the drawing or work instructions., • Cut, modify, or prepare material as necessary while maintaining drawing requirements., • Complete all required welds and attachments. Floor Plate • Identify the floor plate on the drawing package., • Verify the floor plate size, quantity, material, and cutouts, when applicable., • Lay out and prepare the floor plate according to drawing dimensions and notes., • Fit and weld the floor plate according to the specified weld symbols. Final Inspection • Inspect the completed base for weld quality and completeness, squareness, level, overall dimensions, component location, hole locations and sizes, floor plate dimensions and cutouts, cleanliness, and proper grinding and finishing., • Confirm compliance with all drawing requirements., • Identify and correct discrepancies before the base is considered complete. General • Operate shears, brake press, torches, plasma cutters, drills, and overhead cranes safely and efficiently., • Document inspection results and complete required quality records., • Maintain clean, organized, and safe work areas aligned with 5S principles., • Communicate proactively with supervisors and cross-functional teams regarding materials, progress, and issues. CORE COMPETENCIES Technical Skills • Drawing package interpretation — views, details, BOM, notes, general dimensions, and tolerances., • Material identification and verification: type, size, grade, quantity, and weight., • Layout and measurement accuracy — squares, levels, tape, chalk line, protractor, and layout tools., • Structural fit-up: squaring, leveling, alignment, and tacking sequence., • Weld symbol interpretation — weld type, size, length, spacing, contour, and field/all-around indicators., • Welding proficiency (MIG required; TIG/flux-core or other processes preferred and used depending on SOW)., • Heat and distortion control and weld sequencing., • Equipment setup and operation (press brake, plasma cutter, shears, drills, torch)., • Dimensional verification, visual weld inspection, and QA documentation. Behavioral Skills • Customer Focused: Prioritizes quality, accuracy, and on-time delivery in every build., • Team Player: Works collaboratively with fabrication, assembly, paint, and integration teams., • Get It Done: Demonstrates urgency and persistence to overcome obstacles and complete tasks safely., • Strive for Excellence: Continuously improves skills, techniques, and outcomes., • Accountability: Owns workmanship, communication, safety, and adherence to standards; corrects discrepancies before hand-off. Safety Competencies • Consistent use of PPE (welding helmet, gloves, sleeves, jacket, face shields, respiratory protection where required)., • Adherence to grinder, hot-work, fire watch, and LOTO procedures., • Safe operation of cranes, hoists, and lifting devices, including proper rigging of lifting lugs., • Safe handling of compressed gas cylinders, torches, and cutting equipment., • Awareness of pinch points, material handling hazards, and load stability during fit-up. Requirements • High school diploma or equivalent., • Ability to independently read and execute a fabrication and weld drawing package., • Ability to lay out, drill, cut, fit, and weld structural components to drawing dimensions and tolerances., • Ability to use measurement, layout, and inspection tools., • Physical ability to lift up to 50 lbs, stand for extended periods, and work in bent, kneeling, or overhead positions., • Combination Welder/Fitter I: 1–2 years of combined fitting and welding experience, or demonstrated welding experience plus completion of Panelmatic fitting training., • Combination Welder/Fitter II: 3–5 years of combined fitting and welding experience in structural or industrial fabrication., • Combination Welder/Fitter III: 6+ years of combined fitting and welding experience, including complex and high-precision builds. Preferred • Certification in MIG and/or additional welding processes (TIG, flux-core, stick)., • Formal blueprint reading or structural layout training., • Experience operating brake press, shears, or plasma cutters., • Prior experience in industrial or modular fabrication environments., • Demonstrated ability to build a base start-to-finish from the drawing package with no rework. Testing Requirements: Welding Test Required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description About Company: Based in Houston, Taurus Industrial Group (Taurus) is a leading, integrated and industry-diversified technical services company offering end-to-end services across multiple service lines. Leveraging a growing footprint with operations in the U.S. and Canada, Taurus’s service offerings cover engineering and automation, electrical and instrumentation, power systems testing and commissioning, civil and mechanical crafts, pipe and structural steel fabrication, rotating equipment maintenance and repairs, full-service soft crafts, insulation and scaffold, specialty tooling and machining, technical bolting, heat treating, hot-tapping, line stopping and NDT / inspections. With over 60 years of continuous, safe, and reliable operating experience, Taurus operates across multiple industries and sectors, providing front-end engineering, routine maintenance, capital projects, and turnaround services. We service multiple areas of the energy industry, from our origins in traditional petrochemical and refining industries to the broader power, natural gas, midstream, industrials, and the emerging renewables market. Summary The Combination Welder is responsible for performing skilled welding and fabrication activities on industrial piping, equipment, structural components, and related systems in support of construction, maintenance, turnaround, and capital projects. The position performs welding using multiple processes and materials in accordance with approved welding procedures, project specifications, applicable codes and standards, and customer quality requirements. The Combination Welder works from piping isometrics, construction drawings, specifications, and work packages to prepare, fit, weld, repair, and install piping and related components. The position also supports pipefitters and other craft personnel with piping preparation, fit-up, fabrication, and installation activities when not actively performing welding assignments. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications • High school diploma or GED preferred., • Minimum four (4) years of relevant industrial welding experience preferred., • Demonstrated experience welding industrial piping in construction, maintenance, turnaround, or similar heavy industrial environments., • Must successfully complete a Company and/or project-required welding test to demonstrate and verify the welding skills, processes, positions, and materials required for the assigned work., • Demonstrated ability to perform welding in multiple positions, including 2G, 4G, and 6G, as required by assigned work., • Demonstrated proficiency with Shielded Metal Arc Welding (SMAW/Stick) and Gas Tungsten Arc Welding (GTAW/TIG) processes on industrial piping., • Experience welding carbon steel, stainless steel, chrome/alloy, and other industrial piping materials applicable to assigned work., • Experience welding various pipe sizes, wall thicknesses, and schedules, including Schedule 40, 80, and 160 piping., • Ability to read and interpret piping isometrics, construction drawings, weld maps, specifications, welding procedure specifications (WPS), and other technical documents applicable to assigned work., • Working knowledge of welding symbols, joint configurations, material identification, filler-metal requirements, preheat/interpass requirements, and other welding variables applicable to assigned procedures., • Ability to safely use welding machines, grinders, cutting equipment, hand tools, power tools, and other equipment associated with industrial welding and fabrication., • Ability to successfully complete required Company, customer, and site-specific safety training, orientations, and access requirements., • Valid Transportation Worker Identification Credential (TWIC) or ability to obtain and maintain one when required by project or customer assignment., • Valid driver's license and ability to meet Company driving requirements when driving on Company business is required., • NCCER Welding certification or other recognized craft certification preferred., • OSHA training or other applicable industry safety training preferred. Knowledge, Skills, and Abilities • Strong working knowledge of industrial welding, fabrication, and piping installation methods and practices., • Knowledge of SMAW/Stick and GTAW/TIG welding processes and the ability to select and properly use applicable equipment and consumables., • Working knowledge of the characteristics and weldability of carbon steel, stainless steel, chrome/alloy, and other materials applicable to assigned work., • Ability to understand and follow applicable Welding Procedure Specifications (WPS) and welding requirements for assigned materials, processes, and positions., • Ability to read and interpret piping isometrics, construction drawings, welding symbols, weld maps, specifications, and other technical documentation., • Knowledge of joint preparation, beveling, fit-up, alignment, root openings, tack welding, interpass cleaning, and other activities necessary to produce acceptable welds., • Understanding of how heat input, welding sequence, distortion, shrinkage, and material characteristics can affect completed work., • Ability to identify piping materials, welding consumables, filler metals, and other components applicable to assigned work., • Working knowledge of industrial construction quality requirements, weld acceptance criteria, and inspection processes., • Ability to recognize weld defects, improper fit-up, damaged materials, and other conditions that may affect weld quality., • Ability to safely operate welding equipment, grinders, cutting equipment, hand tools, power tools, and related fabrication equipment., • Strong awareness of hot-work hazards, fire prevention requirements, line-of-fire hazards, compressed gases, electrical hazards, fumes, suspended loads, and other hazards associated with industrial welding., • Ability to understand and follow verbal and written work instructions., • Strong attention to detail and commitment to quality workmanship., • Ability to communicate effectively with supervision, pipefitters, welders, riggers, quality personnel, safety personnel, and other craft employees., • Ability to work independently and collaboratively as part of a multi-craft construction or maintenance team., • Ability to adapt to changing work assignments, project priorities, and jobsite conditions. Essential Functions • Perform welding and fabrication activities on industrial piping, equipment, structural components, and related systems using approved welding processes and procedures., • Perform SMAW/Stick and GTAW/TIG welding in required positions, including 2G, 4G, and 6G, based on assigned work and maintained qualifications., • Weld carbon steel, stainless steel, chrome/alloy, and other materials for which the employee is appropriately tested, qualified, and authorized., • Read and interpret piping isometrics, construction drawings, weld maps, welding symbols, specifications, Welding Procedure Specifications (WPS), and work packages., • Verify material type, joint configuration, welding process, filler metal, and applicable procedure requirements before beginning welding activities., • Prepare welding joints by cleaning, grinding, beveling, aligning, fitting, and otherwise preparing materials in accordance with applicable procedures and specifications., • Position, align, clamp, tack, and secure piping and components as necessary to maintain proper fit-up and alignment before and during welding., • Set up and safely operate welding machines, leads, torches, regulators, grinders, cutting equipment, and other welding or fabrication equipment., • Perform welding in accordance with applicable WPS requirements, including specified welding process, consumables, position, preheat, interpass temperature, and other applicable variables., • Monitor weld quality throughout the welding process and correct conditions that could result in unacceptable workmanship., • Perform cleaning, grinding, and other required activities between weld passes and upon completion of welding., • Visually inspect completed welds and promptly report suspected defects, material concerns, or other quality issues to supervision or quality personnel., • Maintain proper identification and control of welding consumables and filler materials in accordance with project and quality requirements., • Assist pipefitters with piping layout, preparation, fit-up, fabrication, installation, and related activities when welding assignments are not required., • Perform cutting, grinding, preparation, and fabrication activities using approved methods and equipment., • Coordinate assigned activities with pipefitters, riggers, other welders, quality personnel, safety personnel, and project supervision., • Assist with material handling and rigging activities when trained, qualified, and authorized to perform such work., • Follow applicable hot-work permit requirements, fire-prevention controls, barricades, ventilation requirements, and other welding safety procedures., • Inspect welding machines, leads, grounds, torches, hoses, regulators, tools, and other equipment before use and promptly report damaged or unsafe equipment., • Follow Company safety policies, applicable regulatory requirements, project procedures, and customer site requirements., • Participate in pre-task planning, JHAs/JSAs, toolbox talks, safety meetings, inspections, and required training., • Exercise stop-work authority when unsafe conditions exist and immediately communicate safety concerns to supervision., • Maintain assigned work areas, welding equipment, tools, and materials in a clean, organized, and safe condition., • Support weld inspections, nondestructive examination (NDE/NDT), repairs, testing, project turnover, and punch-list activities as required., • Perform other duties as assigned consistent with the position's responsibilities, training, qualifications, and authorization. Physical Demands • Ability to stand and walk for extended periods and frequently bend, stoop, kneel, crouch, squat, reach, climb, balance, push, and pull while performing welding and fabrication activities., • Ability to perform welding in multiple positions and body orientations, including standing, kneeling, crouching, bending, and working in restricted-access areas., • Ability to perform repetitive hand, arm, and upper-body movements associated with welding, grinding, cutting, fitting, and material handling., • Ability to lift and carry up to 50 pounds regularly and handle heavier materials or equipment using appropriate assistance or material-handling equipment., • Ability to climb stairs and ladders and work from scaffolds, elevated work platforms, pipe racks, and other industrial work areas as required., • Ability to work on uneven, muddy, rocky, or otherwise variable walking and working surfaces., • Ability to work outdoors in heat, humidity, cold, rain, wind, and other weather conditions., • Ability to wear required personal protective equipment (PPE), including but not limited to:, • hard hat, safety glasses, welding hood, face shield, gloves, hearing protection, FR clothing, steel-toed footwear, FR clothing, fall protection, respiratory protection and other project-specific PPE. Work Environment • Work is primarily performed at active industrial construction, maintenance, turnaround, and customer facilities., • Work may be performed in refinery, petrochemical, chemical, LNG, power generation, manufacturing, and other heavy industrial environments., • Regular exposure to outdoor weather conditions, temperature extremes, noise, vibration, dust, dirt, fumes, moving equipment, piping systems, and other conditions typical of industrial construction and maintenance., • Regular exposure to welding arcs, sparks, hot metal, welding fumes, gases, noise, vibration, dust, moving equipment, outdoor weather conditions, temperature extremes, and other conditions typical of industrial welding and construction., • Work may be performed around operating process units, piping systems, elevated work areas, excavations, structures, mobile equipment, and ongoing construction or maintenance activities., • Work may require the use of ladders, scaffolds, elevated work platforms, fall-protection systems, ventilation equipment, and respiratory protection as applicable to assigned work.

Job Description Summary: Plans and implements the daily curriculum for children in the classroom. Practices and models Conscious Discipline in the classroom. Oversees and coordinates the children’s personal care, hygiene, learning activities, specialized programs, and positive guidance. Maintains classroom records and development checklist (ensures Assessments/ASQs are completed on time). Ensures that the classroom and other play areas are consistently clean and safe. Informs parents of their children’s progress daily. Supervises and directs activities of assistant teachers assigned to the classroom. Keeps the director informed on a timely basis of pertinent issues regarding staff, children, families, and the program. Primary duties and Responsibilities: Understands and complies with all Ivy Kids Brand standards and Texas Minimum Standards General • Plans and implements the MultiPrep curriculum activities and lesson plans that promote children’s social, emotional, physical, and cognitive development. Implements the program schedule for the classroom, outdoor time, meals, snacks, and special activities., • Uses positive guidance techniques consistent with state regulations and counsels children when social, academic, or adjustment problems arise. Practices and models Conscious Discipline at all times., • Keeps accurate and current records of each child’s developmental milestones, student accidents, anecdotal records, attendance, etc., • Ensure assessments are completed on an ongoing basis., • Establishes developmentally appropriate room arrangement, decor, and learning environment in the classroom as outlined by the Ivy Kids operations/curriculum guidelines., • Has a strong working knowledge of Texas Minimum Standards. Understands and follows all Ivy Kids Critical procedures. Ensures that all assistant teachers also understand and follow all Critical procedures., • Plans formal and informal parent conferences with the Director’s/Education Director’s guidance at least twice a year., • Provides written communication to parents via Procare and daily reports. Ensures that daily schedules are posted for parents. Maintains the classroom bulletin boards., • Sends parents Procare updates via photos and videos of their children., • Understand and adhere to Ivy Kids Personnel Policies, • Ensure proper dress code at all times., • Maintains cleanliness and follows a 4-step sanitation process and cleaning checklist., • Is aware of children’s allergies., • Ensure incident reports are completed if needed., • Be regular in your attendance at work., • Communicates appropriately with potential and current families., • Attend staff meetings and trainings. Interaction with Parents, Staff and Director • Meets with prospective families and communicates appropriately with potential new customers., • Supervises specific classroom’s assistant teacher in all aspects of their position; mentors assistant teacher to develop the required skills and expertise needed to ensure classroom curriculum is implemented and appropriate classroom environment is maintained. Assists in the formal review process of assistant teachers., • Assist in training new staff and familiarizing them with program practices, forms, and schedules., • Establishes and maintains primary caregiver groups (ratios), • Observes, records, and reports to the director any significant behavior of children or staff that could adversely affect the quality of care provided, • Actively participates in center events, staff training sessions, meetings, and programs., • Maybe required to work after hours or weekends for center events, trainings, etc., • Maybe required to come in early or stay late as per center’s needs., • Immediately notifies the director of needed repairs to the building, play area, equipment, or toys throughout the facility. Ensures that children are not exposed to equipment or situations that could affect their health and safety., • Accepts temporary work assignments in the event regularly scheduled staff is not available. Health and Safety • Understands and implements all Critical procedures, • Implements appropriate emergency procedures in the event of a fire, tornado, chemical leak, or other emergencies., • Administers CPR/First aid if needed, • Properly maintains educational materials and equipment, • Ensures all sanitization procedures are followed as regulated by childcare licensing, • Keeps the classroom and other play areas safe, neat, and clean. Qualifications • The lead teacher must meet or exceed state licensing requirements for age, education, and experience. Must have at least 2 years of experience working in early education. A Bachelor’s degree in Early Childhood Education, an Associate's degree in Early Childhood Education, or a CDA is required., • Must be able to repeatedly bend, stoop and run; must repeatedly lift and carry children up to 50 pounds depending on the age and weight of the child., • Must be able to effectively interact and communicate with children and parents., • The lead teacher must maintain at least 24 hours of training each year.

Job Description Under the direction of the lead teacher, assists in the daily management and supervision of the classroom and children. Practice and model Conscious discipline in the classroom. Primary duties and Responsibilities: Understands and complies with all Ivy Kids Brand standards and Texas Minimum Standards General • Assists in implementing the MultiPrep curriculum activities and lesson plans. Follows program schedule for the classroom, outdoor time, meals, snacks, and special activities., • Uses positive guidance techniques consistent with state licensing regulations; counsels children when social, academic, or adjustment problems arise. Practices and models Conscious Discipline in the classroom., • Keeps accurate and current records of each child’s developmental milestones, student accidents, anecdotal notes, and attendance., • Under the direction of the lead teacher, helps to establish developmentally appropriate room arrangement, decor, and learning environments in the classroom, consistent with the program’s philosophy and goals., • Provides daily written communication to parents of infants, toddlers, and two-year-olds as well as update Procare. For other age groups, ensure that a daily list of activities is posted for parents. Assists in maintaining classroom bulletin boards., • Has working knowledge of Texas Minimum Standards as they pertain to center operations., • Understands and implements all Ivy Kids Critical Procedures., • Supports the lead teacher in completing ASQs where applicable, • Understands and adheres to Ivy Kids Personnel Policies, • Ensures proper dress code at all times., • Maintains cleanliness and follows a 4-step sanitation process and cleaning checklist., • Is aware of children’s allergies., • Ensure incident reports are completed if needed., • Be regular in your attendance at work., • Communicates appropriately with potential and current families., • Attend staff meetings and trainings. Health and Safety • Understands and implements all Critical procedures., • Implements appropriate emergency procedures in the event of fire, tornado, chemical leak or other emergency., • Administers CPR/First aid if needed., • Properly maintains educational materials and equipment., • Ensures all sanitization procedures are followed as regulated by child care licensing., • Keeps the classroom and other play areas safe, neat and clean. Interaction with Parents, Staff and Director • Establishes and maintains primary caregiver groups (ratios)., • Interacts professionally with current and prospective families., • Observes, records, and reports to the director any significant behavior of children or staff that could adversely affect the quality of care provided., • Actively participates in center events, staff training sessions, meetings, and programs., • Accepts temporary work assignments in the event regularly scheduled staff is not available., • Maybe required to work after hours or weekends for center events, trainings, etc., • Maybe required to come in early or stay late as per center’s needs. Qualifications • The assistant teacher must meet or exceed state licensing requirements for age, education and experience. Previous work experience is preferred., • Must be able to repeatedly bend, stoop and run; must repeatedly lift and carry children up to 50 pounds depending on the age and weight of the child., • Must be able to effectively interact and communicate with children and parents., • The assistant teacher must maintain at least 24 hours of training each year.

Job Description Summary Plans and implements the daily curriculum for children in the classroom. Practices and models Conscious discipline in the classroom. Oversees and coordinates the children’s personal care, hygiene, learning activities, specialized programs, and positive guidance. Maintains classroom records and development checklist (ensures Assessments/ASQs are completed on time). Ensures that the classroom and other play areas are consistently clean and safe. Informs parents of their children’s progress daily. Supervises and directs activities of assistant teachers assigned to the classroom. Keeps the director informed on a timely basis of pertinent issues regarding staff, children, families, and the program. Primary duties and Responsibilities: Understands and complies with all Ivy Kids Brand standards and Texas Minimum Standards General • Plans and implements the MultiPrep curriculum activities and lesson plans that promote children’s social, emotional, physical, and cognitive development. Implements the program schedule for the classroom, outdoor time, meals, snacks, and special activities., • Uses positive guidance techniques consistent with state regulations and counsels children when social, academic, or adjustment problems arise. Practices and models Conscious Discipline at all times., • Keeps accurate and current records of each child’s developmental milestones, student accidents, anecdotal records, and attendance., • Ensure assessments/ASQs are conducted on time., • Establishes developmentally appropriate room arrangement, decor, and learning environment in the classroom as outlined by the Ivy Kids operations/curriculum guidelines., • Has a strong working knowledge of Texas Minimum Standards. Understands and follows all Ivy Kids Critical procedures. Ensures that all assistant teachers also understand and follow all Critical procedures., • Plans formal and informal parent conferences with the Director’s/Education Director’s guidance at least twice a year., • Provides written communication to parents via Procare and daily reports. Ensures that daily schedules are posted for parents. Maintains the classroom bulletin boards., • Sends parents Procare updates via photos and videos of their children., • Assists children with potty training., • Understand and adhere to Ivy Kids Personnel Policies, • Ensure proper dress code at all times., • Maintains cleanliness and follows a 4-step sanitation process and cleaning checklist., • Is aware of children’s allergies., • Ensure incident reports are completed if needed., • Be regular in your attendance at work., • Communicates appropriately with potential and current families., • Attend staff meetings and trainings. Interaction with Parents, Staff and Director • Meets with prospective families and communicates appropriately with potential new customers, • Supervises specific classroom’s assistant teacher in all aspects of their position; mentors assistant teacher to develop the required skills and expertise needed to ensure classroom curriculum is implemented and appropriate classroom environment is maintained. Assists in the formal review process of assistant teachers., • Assist in training new staff and familiarizing them with program practices, forms, and schedules., • Establishes and maintains primary caregiver groups (ratios), • Observes, records, and reports to the director any significant behavior of children or staff that could adversely affect the quality of care provided, • Actively participates in center events, staff training sessions, meetings and programs., • Maybe required to work after hours or weekends for center events, trainings, etc., • Maybe required to come in early or stay late as per center’s needs., • Immediately notifies the director of needed repairs to the building, play area, equipment or toys throughout the facility. Ensures that children are not exposed to equipment or situations that could affect their health and safety., • Accepts temporary work assignments in the event regularly scheduled staff is not available. Health and Safety • Understands and implements all Critical procedures, • Implements appropriate emergency procedures in the event of fire, tornado, chemical leak or other emergency, • Administers CPR/First aid if needed, • Properly maintains educational materials and equipment, • Ensures all sanitization procedures are followed as regulated by child care licensing, • Keeps the classroom and other play areas safe, neat and clean. Qualifications • The lead teacher must meet or exceed state licensing requirements for age, education, and experience. Must have at least 2 years of experience working in early education. A Bachelor’s degree in Early Childhood Education, an Associate’s degree in Early Childhood Education or a CDA is required., • Must be able to repeatedly bend, stoop and run; must repeatedly lift and carry children up to 50 pounds depending on the age and weight of the child., • Must be able to effectively interact and communicate with children and parents., • The lead teacher must maintain at least 24 hours of training each year.

Job DescriptionDescription: Perform routine maintenance and complex repairs on controls systems for large, commercial HVAC boilers (gas-fired hot water boilers, gas-fired steam boilers, and electric-fired steam boilers) and on related equipment. Understand equipment and process flow and effectively troubleshoot problems to ensure everything is working properly, efficiently, and affordably. ESSENTIAL DUTIES AND RESPONSIBILITIES • Inspect, maintain, and repair all components of boiler systems and associated mechanical equipment., • Troubleshoot and repair control systems, electrical circuitry, deaerators, gas and fuel pressure lines, feedwater pumps, compressors, motors, heat exchangers, and other related equipment., • Effectively use combustion analyzer, electric multi-meter, and other related test equipment to test and analyze systems and equipment., • Perform calibrations and checkouts to basic instrumentation such as gauges, pressure transmitters, flow meters, pneumatic and electronic drive units, variable speed motor controls (VFDs), etc., • Follow preventative maintenance schedules and perform routine maintenance and repair, including disassembly, cleaning, and re-assembly functions, fire tube maintenance, water side maintenance, boiler controls disassembly and the repair and rebuilding of controls., • Monitor systems and perform safety inspections to ensure compliance with established safety requirements and EPA regulations., • Document preventive maintenance and repair as required., • Maintain accurate records of completed work and materials used. Complete all necessary paperwork in a timely and professional manner., • Assist Service Sales with customer scope development, technical analysis and support for retrofits, control upgrades and enhancements to existing equipment., • Assist with estimating time and material costs. Requirements: • 5 or more years of service experience in the repair, maintenance, and operation of large commercial boilers and steam generation systems, • High school diploma or equal education credit, • Experience with Siemens, Honeywell, Fireye, Autoflame, and similar controls., • Advanced combustion controls, including use of VFD, O2 Trim, Low NOx combustion, • Valid driver’s license, • OSHA-10 certification (if not currently certified, must be obtained within six (6) months from date of hire), • Basic working knowledge of computers, micro-processor technology with computer-based building control systems and computerized preventative maintenance programs, • Ability to read blueprints, layout plans and wiring diagrams., • Ability to effectively manage time and complete delegated work within specified timeframe.

Job Description Job Summary: The Fire Alarm Technician is responsible for the installation, testing, inspection, service, and repair of fire alarm systems. Respond to emergency and maintenance calls and troubleshoot/replace faulty devices to restore alarm panels to “normal condition”. Complete inspection and service reports. Supervisory Responsibilities: • None Essential Job Functions: • Travel to customer locations to perform installation, service, and upgrades of fire alarm systems., • Respond to emergency situations during and after business hours to resolve safety concerns., • Perform Annual and Semi-annual inspection of Life Safety Systems., • Write and provide inspection/service reports on tested equipment and devices. Indicate any deficiencies or corrections that need to be made., • Troubleshoot and diagnose faults or malfunctions in fire alarm systems and take appropriate actions., • Perform system upgrades, modifications, and expansions as necessary., • Collaborate with customers, contractors, and other team members to ensure efficient and effective installation and maintenance of fire alarm systems., • Maintain accurate records of work performed, including service reports, inspection reports, and equipment inventory., • Provide technical support and guidance to customers regarding fire alarm systems, including system operation, maintenance, and troubleshooting., • Stay current with industry trends, codes, regulations, and technological advancements related to fire alarm systems., • Adhere to safety guidelines and practices, both for personal safety and the safety of others., • Performs other related duties as assigned. Experience & Qualifications: • High School Diploma or GED required. Additional technical certifications or training in fire alarm systems is strongly preferred., • Knowledge of basic electricity and the ability to read electrical schematics., • Proven experience working as a Fire Alarm Technician is preferred., • Willing to support training/development for entry-level candidates. Technical aptitude preferred., • Solid Knowledge of fire alarm systems, including installation, maintenance, troubleshooting, and repair is preferred., • Familiarity with relevant codes, regulations, and standards, such as NFPA 72, NEC, and local fire codes is preferred., • Proficiency in reading and interpreting blueprints, schematics, and technical manuals is preferred., • Strong problem-solving skills and the ability to diagnose and resolve issues efficiently., • Excellent attention to detail and organizational skills., • Strong communication and interpers

Job Description:\n\nDOT Construction is seeking an experienced, hands-on Working Workshop Lead to oversee daily operations within our construction workshop and fabrication area while actively working alongside the crew. This is a working leadership position. The Workshop Lead is expected to remain on the tools, lead by example, lay out work, fabricate components, review drawings, train craftsmen, solve fabrication issues, inspect finished products, and ensure that everything produced in the workshop meets DOT Construction quality standards. The Workshop Lead will coordinate daily shop production, manpower, materials, tools, equipment, fabrication sequencing, quality control, safety, housekeeping, inventory, and preparation of completed work for delivery to active construction projects. The ideal candidate understands how to build high-quality work and how to lead others in producing it consistently. Hands On Workshop Leadership Lead the Shop From the Floor Take ownership of daily workshop operations and ensure fabricated products are completed safely, accurately, efficiently, and to a professional commercial-construction standard. Be a Working Lead Work alongside the crew and participate directly in the production activities required to meet project schedules and quality expectations, including: · Construction layout and measurement · Cutting, fitting, fabrication, and assembly · Finish carpentry, cabinetry, millwork, and architectural woodwork · Metal fabrication and miscellaneous steel work where applicable · Drilling, fastening, hardware installation, sanding, and surface preparation · Specialty construction assemblies, mockups, prototypes, and prefabricated field assemblies · Repairs, modifications, punch-list corrections, and preparation for field installation Lead by Example Set the standard for craftsmanship, accuracy, productivity, professionalism, safety, organization, cleanliness, material care, tool care, and accountability. The Workshop Lead should not accept work that fails to meet the approved drawings or DOT Construction quality standards. Craftsmanship and Quality Control Build It Right Before It Leaves the Shop DOT Construction expects a high level of craftsmanship from every product fabricated within the workshop. Quality must be maintained throughout the fabrication process, not checked only after production is complete. The Working Workshop Lead will establish and maintain a shop culture in which craftsmen take pride in the finished product. Responsibilities include: · Review drawings, details, and approved submittals before fabrication begins. · Verify dimensions before materials are cut and confirm field dimensions when required. · Verify material type, thickness, grade, finish, grain, and orientation. · Establish and enforce fabrication tolerances. · Check squareness, level, plumb, alignment, fit, joint quality, and consistent reveals. · Verify fastener type, spacing, placement, and attachment methods. · Inspect exposed finished surfaces and prevent scratches, dents, chips, gouges, poor cuts, glue residue, and excessive weld marks. · Verify hardware placement and confirm completed assemblies operate correctly. · Check finished dimensions before shipment and require immediate correction of deficient work. · Protect completed products from damage and perform a final quality-control inspection before release to the field. Nothing should leave the DOT Construction workshop unless it is ready to be installed and presented to the owner, architect, or client with confidence. Construction Drawing and Shop Drawing Review Know What You Are Building Before Cutting Material The Working Workshop Lead must be comfortable reading and interpreting construction information, including: · Architectural and structural drawings · Interior elevations, wall sections, and construction details · Finish, door, and hardware schedules · Millwork, shop, and fabrication drawings · Manufacturer instructions and approved product data · Submittals, RFIs, addenda, field sketches, and project specifications · Verified field dimensions and installation requirements The Workshop Lead must compare drawings, measurements, materials, and fabrication requirements before materials are cut or assemblies are built. When information appears incomplete, conflicting, or incorrect, follow this process: · Stop the questionable fabrication before material is wasted. · Verify the drawing, detail, field condition, or dimension. · Document the discrepancy clearly. · Notify the Project Manager or Superintendent. · Obtain direction or clarification before proceeding. · Resume fabrication after the requirement is understood and documented. The Workshop Lead is expected to identify problems before they become wasted material, rework, schedule delays, or field installation problems. Production Planning and Workflow Know What Needs to Be Built Next The Working Workshop Lead must understand what the crew is building today and what will be required over the coming weeks. Responsibilities include: · Review upcoming fabrication requirements and approved production information. · Establish daily and weekly production goals. · Prioritize fabrication according to project schedules and field installation needs. · Coordinate regularly with Project Managers and Superintendents. · Determine manpower needs and assign work according to employee skill level. · Confirm required materials, approved drawings, and field dimensions are available. · Identify long-lead materials and production constraints early. · Sequence fabrication, finishing, staging, and delivery efficiently. · Develop recovery plans when production begins falling behind. · Prevent field crews from waiting on shop-fabricated materials whenever reasonably possible. A successful Workshop Lead should understand tomorrow's workload and prepare the crew, materials, tools, and information required to execute it. Crew Leadership and Training The Working Workshop Lead will supervise craftsmen, helpers, laborers, and other employees assigned to the workshop. Responsibilities include: · Assign daily work and explain fabrication requirements clearly. · Demonstrate proper construction and fabrication techniques. · Train less experienced employees and develop their ability to work independently. · Inspect work during fabrication and correct poor workmanship immediately. · Establish reasonable production expectations and monitor employee productivity. · Teach proper tool usage and reinforce safe work practices. · Maintain professional conduct and accountability throughout the shop. · Identify employees capable of taking on greater responsibility. The Workshop Lead must be capable of teaching the work as well as performing it. When an employee does not understand how an item should be built, the Lead should demonstrate the correct method. Material Management Treat Materials Like Company Money Material waste directly affects project profitability. The Working Workshop Lead will maintain control of shop materials and ensure employees use them responsibly. · Review material requirements and quantities before fabrication. · Coordinate purchasing needs with Project Management. · Inspect incoming materials for damage, conformity, and usable condition. · Organize and protect lumber, sheet goods, metals, hardware, finished materials, and specialty products. · Maintain usable remnants when practical and plan cuts to maximize material yield. · Separate damaged, nonconforming, or rejected materials. · Track specialty materials and identify shortages early. · Prevent employees from cutting expensive material before dimensions and requirements are confirmed. Tools and Equipment The Workshop Lead will help maintain accountability for company tools, shop equipment, and fabrication machinery. Equipment may include: · Table saws, miter saws, track saws, circular saws, band saws, and chop saws · Drill presses, routers, sanders, planers, jointers, grinders, and metal-cutting equipment · Welding equipment, compressors, pneumatic tools, and cordless tools · Clamps, layout equipment, levels, lasers, jigs, and specialty fabrication equipment · Forklifts, pallet jacks, ladders, portable lifts, and other material-handling equipment Responsibilities include maintaining tools in safe operating condition, keeping machine guards in place, removing damaged tools from service, maintaining organized storage, preventing avoidable loss, coordinating maintenance, tracking consumables, and ensuring employees use the correct tool for each task. Prefabrication and Field Support A major function of the DOT Construction workshop is to support active project teams. The Workshop Lead may oversee fabrication of: · Custom blocking, backing assemblies, wood framing assemblies, and temporary construction components · Architectural trim, millwork, cabinetry, shelving, casework, and finish components · Door and hardware modifications, equipment supports, specialty brackets, and metal frames · Miscellaneous steel items, equipment stands, protective barriers, templates, and jigs · Mockups, prototypes, and project-specific fabricated assemblies Shop fabrication should make field installation faster, cleaner, safer, and more predictable. Completed work must be clearly identified, protected, and prepared for efficient installation. Mockups and Prototypes Before repetitive fabrication begins, the Working Workshop Lead may be required to produce a first-piece assembly, prototype, or mockup to verify: · Dimensions, materials, appearance, fit, and finish · Hardware, attachment methods, fabrication sequence, and installation requirements Once approved, the accepted mockup establishes the quality standard for the remaining production run. Repeated fabrication must remain consistent with that standard. Finish Quality Special attention must be given to items that will remain visible after construction is complete. Finished work should be exhibited: · Straight cuts, clean edges, tight joints, and smooth transitions · Consistent reveals, uniform spacing, proper alignment, and accurate dimensions · Correct fastener placement with minimal exposed fasteners where they are not intended · Professional surface preparation and a clean, consistent finish · Properly installed hardware and correct fit, function, and operation The completed work must withstand close review and reflect professional commercial-construction craftsmanship. Safety Management Maintain a Professional and Safe Workshop The Working Workshop Lead is responsible for maintaining a safe workshop environment. Responsibilities include: · Enforce DOT Construction safety requirements and applicable OSHA standards. · Require proper personal protective equipment and safe machine operation. · Maintain guards, electrical connections, clear walkways, access, and egress. · Control sawdust, sparks, fabrication debris, cords, hoses, and trip hazards. · Maintain safe material stacking, lifting practices, and material-handling operations. · Keep fire extinguishers accessible and store flammable materials correctly. · Remove damaged tools and equipment from service. · Conduct or participate in toolbox talks and correct unsafe conditions immediately. Production goals never justify unsafe work. The Workshop Lead is expected to plan the work so employees can meet quality and schedule requirements safely. Workshop Organization and Housekeeping The condition of the shop reflects the quality and discipline of the company. The Working Workshop Lead will maintain: · Clean workstations and defined fabrication areas · Organized tools, material racks, hardware storage, cords, and hoses · Clear aisles, access routes, exits, and loading areas · Proper scrap disposal and regular removal of waste · Protected finished-product storage and clearly identified staging areas · Orderly storage for ladders, portable equipment, and material-handling devices Housekeeping is part of daily production. Work areas should be reset throughout the day and ready for the next operation. Shipping Staging and Delivery Preparation Before fabricated materials leave the shop, the Working Workshop Lead will ensure they are properly prepared for transportation and field installation. Responsibilities include: · Complete the final quality-control inspection and verify quantities. · Confirm the project destination and installation location. · Label components and match loose hardware to the correct assemblies. · Protect exposed finishes and package items to prevent transportation damage. · Coordinate loading sequence, delivery timing, and field receiving requirements. · Provide applicable installation drawings, templates, or information with specialty assemblies. Products should arrive at the jobsite ready to be installed, with deficiencies corrected before shipment. Communication and Documentation The Workshop Lead will maintain regular communication with DOT Construction Project Managers and field Superintendents regarding: · Daily production status and completed quantities · Upcoming fabrication and delivery requirements · Material shortages, deliveries, and long-lead concerns · Drawing conflicts and outstanding field dimensions · Equipment issues and manpower requirements · Quality concerns, rework, and corrective action · Schedule concerns, change-order fabrication, and delivery readiness · Shop photographs and other required production documentation When a fabrication issue may affect project cost, quality, or schedule, the Workshop Lead must communicate it promptly and provide enough detail for Project Management to act. Extra Work and Change Management The Workshop Lead must recognize when requested fabrication may fall outside the original project scope. When additional work is requested: · Identify and describe the requested work. · Notify the Project Manager before proceeding whenever possible. · Document labor, materials, and equipment used. · Take photographs and maintain fabrication records when appropriate. · Obtain proper direction and track the work to completion. Shop labor and material have value and must be documented accurately. What We Look for inWhy Join DOT Construction in South Texas? \r\nThe South Texas commercial and industrial construction market continues to grow, and DOT Construction has a strong, multi-year project pipeline. We are looking for experienced craftsmen and construction professionals who want a long-term opportunity, steady work, and a defined career path with a growing contractor.\r\n\r\nOur workshop supports field operations by producing high-quality fabricated components, assemblies, architectural finishes, specialty items, and project-specific materials before they are delivered to the jobsite.\r\n\r\nQuality craftsmanship matters at DOT Construction. We are seeking a skilled construction professional who takes pride in producing clean, accurate work and understands that every item leaving the workshop represents the quality of our company.\r\n\r\nWorking in Texas also means zero state individual income tax and a competitive cost of living, providing an excellent opportunity for experienced construction professionals interested in relocating to South Texas.

Job Description About Company: Based in Houston, Taurus Industrial Group (Taurus) is a leading, integrated and industry-diversified technical services company offering end-to-end services across multiple service lines. Leveraging a growing footprint with operations in the U.S., Canada, and Mexico, Taurus’s service offerings cover engineering and automation, electrical and instrumentation, power systems testing and commissioning, civil and mechanical crafts, pipe and structural steel fabrication, rotating equipment maintenance and repairs, full-service soft crafts, insulation and scaffold, specialty tooling and machining, technical bolting, heat treating, hot-tapping, line stopping and NDT / inspections. With over 60 years of continuous, safe, and reliable operating experience, Taurus operates across multiple industries and sectors, providing front-end engineering, routine maintenance, capital projects, and turnaround services. We service multiple areas of the energy industry, from our origins in traditional petrochemical and refining industries to the broader power, natural gas, midstream, industrials, and the emerging renewables market. Site Location: Houston, TX Summary The Combination Welder is responsible for performing skilled welding and fabrication activities on industrial piping, equipment, structural components, and related systems in support of construction, maintenance, turnaround, and capital projects. The position performs welding using multiple processes and materials in accordance with approved welding procedures, project specifications, applicable codes and standards, and customer quality requirements. The Combination Welder works from piping isometrics, construction drawings, specifications, and work packages to prepare, fit, weld, repair, and install piping and related components. The position also supports pipefitters and other craft personnel with piping preparation, fit-up, fabrication, and installation activities when not actively performing welding assignments. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications • High school diploma or GED preferred., • Minimum four (4) years of relevant industrial welding experience preferred., • Demonstrated experience welding industrial piping in construction, maintenance, turnaround, or similar heavy industrial environments., • Must successfully complete applicable weld tests and maintain required welding qualifications for assigned work., • Demonstrated ability to perform welding in multiple positions, including 2G, 4G, and 6G, as required by assigned work., • Demonstrated proficiency with Shielded Metal Arc Welding (SMAW/Stick) and Gas Tungsten Arc Welding (GTAW/TIG) processes on industrial piping., • Experience welding carbon steel, stainless steel, chrome/alloy, and other industrial piping materials applicable to assigned work., • Experience welding various pipe sizes, wall thicknesses, and schedules, including Schedule 40, 80, and 160 piping., • Ability to read and interpret piping isometrics, construction drawings, weld maps, specifications, welding procedure specifications (WPS), and other technical documents applicable to assigned work., • Working knowledge of welding symbols, joint configurations, material identification, filler-metal requirements, preheat/interpass requirements, and other welding variables applicable to assigned procedures., • Ability to safely use welding machines, grinders, cutting equipment, hand tools, power tools, and other equipment associated with industrial welding and fabrication., • Ability to successfully complete required Company, customer, and site-specific safety training, orientations, and access requirements., • Valid Transportation Worker Identification Credential (TWIC) or ability to obtain and maintain one when required by project or customer assignment., • Valid driver's license and ability to meet Company driving requirements when driving on Company business is required., • NCCER Welding certification or other recognized craft certification preferred., • OSHA training or other applicable industry safety training preferred. Knowledge, Skills, and Abilities • Strong working knowledge of industrial welding, fabrication, and piping installation methods and practices., • Knowledge of SMAW/Stick and GTAW/TIG welding processes and the ability to select and properly use applicable equipment and consumables., • Working knowledge of the characteristics and weldability of carbon steel, stainless steel, chrome/alloy, and other materials applicable to assigned work., • Ability to understand and follow applicable Welding Procedure Specifications (WPS) and welding requirements for assigned materials, processes, and positions., • Ability to read and interpret piping isometrics, construction drawings, welding symbols, weld maps, specifications, and other technical documentation., • Knowledge of joint preparation, beveling, fit-up, alignment, root openings, tack welding, interpass cleaning, and other activities necessary to produce acceptable welds., • Understanding of how heat input, welding sequence, distortion, shrinkage, and material characteristics can affect completed work., • Ability to identify piping materials, welding consumables, filler metals, and other components applicable to assigned work., • Working knowledge of industrial construction quality requirements, weld acceptance criteria, and inspection processes., • Ability to recognize weld defects, improper fit-up, damaged materials, and other conditions that may affect weld quality., • Ability to safely operate welding equipment, grinders, cutting equipment, hand tools, power tools, and related fabrication equipment., • Strong awareness of hot-work hazards, fire prevention requirements, line-of-fire hazards, compressed gases, electrical hazards, fumes, suspended loads, and other hazards associated with industrial welding., • Ability to understand and follow verbal and written work instructions., • Strong attention to detail and commitment to quality workmanship., • Ability to communicate effectively with supervision, pipefitters, welders, riggers, quality personnel, safety personnel, and other craft employees., • Ability to work independently and collaboratively as part of a multi-craft construction or maintenance team., • Ability to adapt to changing work assignments, project priorities, and jobsite conditions. Essential Functions • Perform welding and fabrication activities on industrial piping, equipment, structural components, and related systems using approved welding processes and procedures., • Perform SMAW/Stick and GTAW/TIG welding in required positions, including 2G, 4G, and 6G, based on assigned work and maintained qualifications., • Weld carbon steel, stainless steel, chrome/alloy, and other materials for which the employee is appropriately tested, qualified, and authorized., • Read and interpret piping isometrics, construction drawings, weld maps, welding symbols, specifications, Welding Procedure Specifications (WPS), and work packages., • Verify material type, joint configuration, welding process, filler metal, and applicable procedure requirements before beginning welding activities., • Prepare welding joints by cleaning, grinding, beveling, aligning, fitting, and otherwise preparing materials in accordance with applicable procedures and specifications., • Position, align, clamp, tack, and secure piping and components as necessary to maintain proper fit-up and alignment before and during welding., • Set up and safely operate welding machines, leads, torches, regulators, grinders, cutting equipment, and other welding or fabrication equipment., • Perform welding in accordance with applicable WPS requirements, including specified welding process, consumables, position, preheat, interpass temperature, and other applicable variables., • Monitor weld quality throughout the welding process and correct conditions that could result in unacceptable workmanship., • Perform cleaning, grinding, and other required activities between weld passes and upon completion of welding., • Visually inspect completed welds and promptly report suspected defects, material concerns, or other quality issues to supervision or quality personnel., • Maintain proper identification and control of welding consumables and filler materials in accordance with project and quality requirements., • Assist pipefitters with piping layout, preparation, fit-up, fabrication, installation, and related activities when welding assignments are not required., • Perform cutting, grinding, preparation, and fabrication activities using approved methods and equipment., • Coordinate assigned activities with pipefitters, riggers, other welders, quality personnel, safety personnel, and project supervision., • Assist with material handling and rigging activities when trained, qualified, and authorized to perform such work., • Follow applicable hot-work permit requirements, fire-prevention controls, barricades, ventilation requirements, and other welding safety procedures., • Inspect welding machines, leads, grounds, torches, hoses, regulators, tools, and other equipment before use and promptly report damaged or unsafe equipment., • Follow Company safety policies, applicable regulatory requirements, project procedures, and customer site requirements., • Participate in pre-task planning, JHAs/JSAs, toolbox talks, safety meetings, inspections, and required training., • Exercise stop-work authority when unsafe conditions exist and immediately communicate safety concerns to supervision., • Maintain assigned work areas, welding equipment, tools, and materials in a clean, organized, and safe condition., • Support weld inspections, nondestructive examination (NDE/NDT), repairs, testing, project turnover, and punch-list activities as required., • Perform other duties as assigned consistent with the position's responsibilities, training, qualifications, and authorization. Physical Demands • Ability to stand and walk for extended periods and frequently bend, stoop, kneel, crouch, squat, reach, climb, balance, push, and pull while performing welding and fabrication activities., • Ability to perform welding in multiple positions and body orientations, including standing, kneeling, crouching, bending, and working in restricted-access areas., • Ability to perform repetitive hand, arm, and upper-body movements associated with welding, grinding, cutting, fitting, and material handling., • Ability to lift and carry up to 50 pounds regularly and handle heavier materials or equipment using appropriate assistance or material-handling equipment., • Ability to climb stairs and ladders and work from scaffolds, elevated work platforms, pipe racks, and other industrial work areas as required., • Ability to work on uneven, muddy, rocky, or otherwise variable walking and working surfaces., • Ability to work outdoors in heat, humidity, cold, rain, wind, and other weather conditions., • Ability to wear required personal protective equipment (PPE), including but not limited to:, • hard hat, safety glasses, welding hood, face shield, gloves, hearing protection, FR clothing, steel-toed footwear, FR clothing, fall protection, respiratory protection and other project-specific PPE. Work Environment • Work is primarily performed at active industrial construction, maintenance, turnaround, and customer facilities., • Work may be performed in refinery, petrochemical, chemical, LNG, power generation, manufacturing, and other heavy industrial environments., • Regular exposure to outdoor weather conditions, temperature extremes, noise, vibration, dust, dirt, fumes, moving equipment, piping systems, and other conditions typical of industrial construction and maintenance., • Regular exposure to welding arcs, sparks, hot metal, welding fumes, gases, noise, vibration, dust, moving equipment, outdoor weather conditions, temperature extremes, and other conditions typical of industrial welding and construction., • Work may be performed around operating process units, piping systems, elevated work areas, excavations, structures, mobile equipment, and ongoing construction or maintenance activities., • Work may require the use of ladders, scaffolds, elevated work platforms, fall-protection systems, ventilation equipment, and respiratory protection as applicable to assigned work.

Job Description Summary Plans and implements the daily curriculum for children in the classroom. Practices and models Conscious discipline in the classroom. Oversees and coordinates the children’s personal care, hygiene, learning activities, specialized programs, and positive guidance. Maintains classroom records and development checklist (ensures ASQs are completed on time). Ensures that the classroom and other play areas are consistently clean and safe. Informs parents of their children’s progress daily. Supervises and directs activities of assistant teachers assigned to the classroom. Keeps the director informed on a timely basis of pertinent issues regarding staff, children, families, and the program. Primary duties and Responsibilities: Understands and complies with all Ivy Kids Brand standards and Texas Minimum Standards General • Plans and implements the MultiPrep curriculum activities and lesson plans that promote children’s social, emotional, physical, and cognitive development. Implements the program schedule for the classroom, outdoor time, meals, snacks, and special activities., • Uses positive guidance techniques consistent with state regulations and counsels children when social, academic, or adjustment problems arise. Practices and models Conscious Discipline at all times., • Keeps accurate and current records of each child’s developmental milestones, student accidents, anecdotal records, and attendance., • Ensure ASQs are conducted on time., • Establishes developmentally appropriate room arrangement, decor, and learning environment in the classroom as outlined by the Ivy Kids operations/curriculum guidelines., • Has a strong working knowledge of Texas Minimum Standards. Understands and follows all Ivy Kids Critical procedures. Ensures that all assistant teachers also understand and follow all Critical procedures., • Plans formal and informal parent conferences with the Director’s/Education Director’s guidance at least twice a year., • Provides written communication to parents via Procare and daily reports. Ensures that daily schedules are posted for parents. Maintains the classroom bulletin boards., • Sends parents Procare updates via photos and videos of their children., • Understand and adhere to Ivy Kids Personnel Policies, • Ensure proper dress code at all times., • Be regular in your attendance at work., • Maintains cleanliness and follows a 4-step sanitation process and cleaning checklist., • Is aware of children’s allergies., • Ensure incident reports are completed if needed., • Communicates appropriately with potential and current families., • Attend staff meetings and trainings. Interaction with Parents, Staff, and Director • Meets with prospective families and communicates appropriately with potential new customers., • Supervises specific classroom’s assistant teacher in all aspects of their position; mentors assistant teacher to develop the required skills and expertise needed to ensure classroom curriculum is implemented and appropriate classroom environment is maintained. Assists in the formal review process of assistant teachers., • Assists in training new staff and familiarizing them with program practices, forms, and schedules., • Establishes and maintains primary caregiver groups (ratios), • Observes, records, and reports to the director any significant behavior of children or staff that could adversely affect the quality of care provided, • Actively participates in center events, staff training sessions, meetings, and programs., • Maybe required to work after hours or weekends for center events, trainings, etc., • Maybe required to come in early or stay late as per center’s needs., • Immediately notifies the director of needed repairs to the building, play area, equipment, or toys throughout the facility. Ensures that children are not exposed to equipment or situations that could affect their health and safety., • Accepts temporary work assignments in the event regularly scheduled staff is not available. Health and Safety • Understands and implements all Critical procedures and infant care procedures., • Implements appropriate emergency procedures in the event of fire, tornado, chemical leak, or other emergency, • Administers CPR/First aid if needed, • Properly maintains educational materials and equipment, • Ensures all sanitization procedures are followed as regulated by childcare licensing, • Keeps the classroom and other play areas safe, neat, and clean. Qualifications • The lead teacher must meet or exceed state licensing requirements for age, education, and experience. Must have at least 2 years of experience working in early education. A Bachelor’s degree in Early Childhood Education, an Associate's degree in Early Childhood Education, or a CDA is required., • Must be able to repeatedly bend, stoop and run; must repeatedly lift and carry children up to 50 pounds depending on the age and weight of the child., • Must be able to effectively interact and communicate with children and parents., • The lead teacher must maintain at least 24 hours of training each year.

Job Description Job Summary Plans and implements the daily after-school activities and summer camp curriculum for children. Practice and Models Conscious Discipline in the classroom. Oversees and coordinates the children’s personal care, hygiene, learning activities, specialized programs, and positive guidance. Maintains classroom records and developmental checklist. Ensures that classroom and other play areas are consistently clean and safe. Supervises and directs activities of the assistant teacher assigned to the classroom. Keeps director informed on a timely basis of pertinent issues regarding staff, children, families, and the program. Primary duties and Responsibilities: Understands and complies with all Ivy Kids Brand standards and Texas Minimum Standards General • Plans and implements daily afterschool activities, summer camp curriculum activities, and lesson plans as per Ivy Kids Standards., • Uses positive guidance techniques consistent with state regulations, and counsels children when social, academic, or adjustment problems arise. Practice, models, and promotes Conscious Discipline., • Keeps accurate and current records of each student's accidents, anecdotal records, etc., • Establishes developmentally appropriate room arrangement, décor, and learning environment in the classroom promoting learning and Conscious Discipline., • Ensures that a daily list of activities is posted for parents. Maintains classroom bulletin boards., • Has strong working knowledge of Texas Minimum Standards as they pertain to center operations., • Understand and adhere to Ivy Kids Personnel Policies, • Ensure proper dress code at all times., • Maintains cleanliness and follows a 4-step sanitation process and cleaning checklist., • Is aware of children’s allergies., • Ensure incident reports are completed if needed., • Be regular in your attendance at work., • Communicates appropriately with potential and current families., • Attend staff meetings and trainings. Interactions with Parents, Staff, and Director • Communicates appropriately with parents and children., • Establishes and maintains primary caregiver groups (ratios)., • Observes, records, and reports to the Director any significant behavior of children or staff that could adversely affect the quality of care provided., • Actively participates in center events, staff training sessions, meetings, and programs., • Immediately notifies the Director of needed repairs to the building, play area, equipment, or toys throughout the facility. Ensures that children are not exposed to equipment or situations that could affect their health or safety., • Accepts temporary work assignments in the event regularly scheduled staff is not available, such as answering the phones, cooking, assisting in the classrooms, etc., • Maybe required to work after hours or weekends for center events, trainings, etc., • Maybe required to come in early or stay late as per center’s needs. Health and Safety • Implements appropriate emergency procedures in the event of a fire, tornado, chemical leak, or other emergencies., • Administers CPR/First Aid or other appropriate emergency procedures in the event of serious student accidents or emergencies., • Properly maintains educational materials and equipment; ensures that children are appropriately using the equipment., • Keeps classroom and other play areas safe, neat, and clean., • Follows all Ivy Kids Critical Procedures., • Transport children to and from school and field trip venues. (drive a 14-passenger bus) Qualifications • Must meet or exceed state licensing requirements for age, education, and experience. Must have at least 2 years of experience working in early education., • One or more years experience working with children in a childcare center, • Knowledge of Texas DFPS Minimum Standards, • High school diploma or equivalent, • High energy and self-motivated individual, • Must be able to repeatedly bend, stoop and run; must repeatedly lift and carry children up to 50 pounds depending on the age and weight of the child., • Must be able to effectively interact and communicate with children and parents., • Must maintain at least 24 hours of training each year.

Job Description Summary Plans and implements the daily curriculum for children in the classroom. Practices and models Conscious discipline in the classroom. Oversees and coordinates the children’s personal care, hygiene, learning activities, specialized programs, and positive guidance. Maintains classroom records and development checklist (ensures Assessments/ASQs are completed on time). Ensures that the classroom and other play areas are consistently clean and safe. Informs parents of their children’s progress daily. Supervises and directs activities of assistant teachers assigned to the classroom. Keeps the director informed on a timely basis of pertinent issues regarding staff, children, families, and the program. Primary duties and Responsibilities: Understands and complies with all Ivy Kids Brand standards and Texas Minimum Standards General • Plans and implements the MultiPrep curriculum activities and lesson plans that promote children’s social, emotional, physical, and cognitive development. Implements the program schedule for the classroom, outdoor time, meals, snacks, and special activities., • Uses positive guidance techniques consistent with state regulations and counsels children when social, academic, or adjustment problems arise. Practices and models Conscious Discipline at all times., • Keeps accurate and current records of each child’s developmental milestones, student accidents, anecdotal records, and attendance., • Ensure assessments/ASQs are conducted on time., • Establishes developmentally appropriate room arrangement, decor, and learning environment in the classroom as outlined by the Ivy Kids operations/curriculum guidelines., • Has a strong working knowledge of Texas Minimum Standards. Understands and follows all Ivy Kids Critical procedures. Ensures that all assistant teachers also understand and follow all Critical procedures., • Plans formal and informal parent conferences with the Director’s/Education Director’s guidance at least twice a year., • Provides written communication to parents via Procare and daily reports. Ensures that daily schedules are posted for parents. Maintains the classroom bulletin boards., • Sends parents Procare updates via photos and videos of their children., • Assists children with potty training., • Understand and adhere to Ivy Kids Personnel Policies, • Ensure proper dress code at all times., • Maintains cleanliness and follows a 4-step sanitation process and cleaning checklist., • Is aware of children’s allergies., • Ensure incident reports are completed if needed., • Be regular in your attendance at work., • Communicates appropriately with potential and current families., • Attend staff meetings and trainings. Interaction with Parents, Staff and Director • Meets with prospective families and communicates appropriately with potential new customers, • Supervises specific classroom’s assistant teacher in all aspects of their position; mentors assistant teacher to develop the required skills and expertise needed to ensure classroom curriculum is implemented and appropriate classroom environment is maintained. Assists in the formal review process of assistant teachers., • Assist in training new staff and familiarizing them with program practices, forms, and schedules., • Establishes and maintains primary caregiver groups (ratios), • Observes, records, and reports to the director any significant behavior of children or staff that could adversely affect the quality of care provided, • Actively participates in center events, staff training sessions, meetings and programs., • Maybe required to work after hours or weekends for center events, trainings, etc., • Maybe required to come in early or stay late as per center’s needs., • Immediately notifies the director of needed repairs to the building, play area, equipment or toys throughout the facility. Ensures that children are not exposed to equipment or situations that could affect their health and safety., • Accepts temporary work assignments in the event regularly scheduled staff is not available. Health and Safety • Understands and implements all Critical procedures, • Implements appropriate emergency procedures in the event of fire, tornado, chemical leak or other emergency, • Administers CPR/First aid if needed, • Properly maintains educational materials and equipment, • Ensures all sanitization procedures are followed as regulated by child care licensing, • Keeps the classroom and other play areas safe, neat and clean. Qualifications • The lead teacher must meet or exceed state licensing requirements for age, education, and experience. Must have at least 2 years of experience working in early education. A Bachelor’s degree in Early Childhood Education, an Associate’s degree in Early Childhood Education or a CDA is required., • Must be able to repeatedly bend, stoop and run; must repeatedly lift and carry children up to 50 pounds depending on the age and weight of the child., • Must be able to effectively interact and communicate with children and parents., • The lead teacher must maintain at least 24 hours of training each year.

Job Description????TRAVEL PIPE WELDERS WANTED IN SOUTH HAVEN, MISSISSIPPI????TIG / Combo Pipe Welder (High-Pressure Stainless) ???? Jobsite Location: Southaven, Mississippi ???? $30.00 - $60.00/Hour + 7 Days Per Diem ???? Contract-to-Hire Opportunity Join a Major Industrial Construction Project Are you a skilled Pipe Welder looking for your next high-profile industrial project? We're seeking experienced TIG and Combo Pipe Welders to join a large-scale construction project involving high-pressure stainless and carbon steel piping systems. This is an excellent opportunity to showcase your welding expertise, work alongside top-tier pipefitters and craftsmen, and earn competitive pay with per diem available for qualified travelers. If you're confident in your ability to weld to specification, read ISO drawings, and pass a weld test, we want to hear from you. What You'll Be Doing As a Pipe Welder, you'll play a critical role in the installation and construction of high-pressure piping systems by: Performing TIG and/or Combo welding on stainless and carbon steel pipe Reading and interpreting isometric drawings, weld symbols, and specifications Fitting, tacking, welding, grinding, and preparing pipe for inspection and testing Welding Schedule 10 stainless steel and heavier wall pipe Working on high-pressure gas and water piping systems Collaborating with pipefitters to install and align piping systems Performing hydrostatic, air, and leak testing Maintaining weld quality that meets project and industry standards Following all site safety requirements, including: • Lockout/Tagout (LOTO), • Hot Work Permits, • Fire Watch Procedures, • PPE RequirementsRequired Experience, • Proven experience as a Pipe Welder (not structural welding only), • Strong TIG welding experience on stainless steel pipe, • Combo welding experience preferred, • Experience welding carbon steel and stainless steel pipe, • Ability to read and interpret ISO drawings and weld symbols, • Experience working in industrial environments such as:, • Refineries, • Chemical Plants, • Power Plants, • Process Facilities, • Large Mechanical Construction Projects, • Experience with high-pressure gas and water piping systems, • Strong understanding of fit-up, weld preparation, and testing requirementsPreferred Qualifications, • 6G Pipe Welding Experience, • AWS Pipe Certifications, • Ability to pass site weld tests, • Experience with Schedule 10 Stainless and heavier wall piping, • Hydrotesting and leak-testing experience, • Strong commitment to safety and qualityWhy You'll Want This Opportunity ???? Competitive Pay: $30-$60/hour ???? Per Diem Available for Travelers ???? Contract-to-Hire Potential ???? Major Industrial Construction Project ???? Work with Highly Skilled Tradespeople ???? Opportunity to Demonstrate Advanced TIG & Combo Welding Skills ???? Gain Valuable Experience with High-Pressure Systems, Testing, and Industrial Processes Long-Term Career Growth Potential Benefits Eligible employees may receive: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) with Traditional & Roth Options, • Life Insurance, • AD&D Coverage, • Short-Term Disability, • Long-Term Disability, • Health Savings Account (HSA), • Transportation Benefits, • Employee Assistance Program (EAP), • Paid Time Off (where applicable)Work Environment This role is performed on an active industrial construction site and requires working around heavy equipment, multiple trades, elevated work areas, and changing weather conditions. Safety is a top priority, and all employees are expected to follow site-specific protocols and maintain the highest standards of workmanship. Job Type & Location This is a Contract to Hire position based out of Houston, TX. Pay and Benefits The pay range for this position is $30.00 - $60.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Houston,TX. Application Deadline This position is anticipated to close on Oct 13, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description We are looking for technicians who can service marine fire fighting equipment and perform annual and 5 yearly inspections on lifesaving appliances for commercial ships. Company is specialized on marine safety services such as fire fighting systems, life rafts, lifeboats and calibration services. The ideal applicant will not need to be an experienced technician in this field rather than ready and desired for training but we expect him to have exceptional customer service skills and be willing to spend the necessary time explaining issues to customers and helping them understand their service needs. Our company offers a intensive training for improvement. The work is generally physically demanding. Responsibilities • Work with technical supervisor to obtain company's goals in terms of technical quality of provided services, • Providing onboard inspection services for ships, • Conduct marine safety equipment inspections in accordance with company technical procedures Requirements: • General and mechanic skills, • High school diploma, • Must have a clean criminal record, • Must be able to pass drug screen, • Must be physically fit to perform services, • Familiarity with the basic mechanical tools, • Must have a valid TWIC card, • Willing to learn and desire for training, • Willing to work with a flexible schedule of working hours Required education: • High school or equivalent Required licenses or certifications: • TWIC , Driver's License Job Type: Full-time Pay: $14.00 - $17.00 per hour

Job Description The General Manager is responsible for leading and overseeing all Houston operations, including Mitigation, Reconstruction, Contents, and Sales. This role is accountable for driving revenue growth, profitability, operational excellence, customer satisfaction, and employee development. The ideal candidate will have strong restoration industry experience, leadership skills, and a proven ability to manage teams, financial performance, and business operations while ensuring compliance with company standards and safety requirements. Responsibilities: • Responsible for all aspects of running a restoration organization, • Manage quality control and assurances protocols, • Ensure projects are collected per company parameters, • Implement procedures and hold key personnel accountable, • Responsible for mentoring and developing employees, • Create, execute, and manage plans to increase sales, profitability and customer satisfaction, • Ability to successfully generate new business and build client relationships, • Ability to review estimates and job profitability, • Analyze and manage budgets, • Locate and hire subcontractors, • Oversee the maintenance of facilities, • Conduct performance evaluations of all direct reports, • Provide leadership and oversight for all Houston operations, including Mitigation, Reconstruction, Contents, and Emergency Response services., • Ensure projects are completed safely, on time, within budget, and to company quality standards., • Monitor operational KPIs, production metrics, job profitability, customer satisfaction, and collections., • Drive accountability and performance across all departments., • Develop and implement strategies to improve efficiency, profitability, and service delivery. Requirements: • 10+ years' experience in the insurance restoration industry, • 5+ year general management experience, • Experience in both mitigation & reconstruction and handling fire loss jobs, • Experience with Dash and QuickBooks a plus, • Proven ability to build, motivate, and maintain high performing teams, • Proficiency with Microsoft Office Suite, internet, and software systems, • Knowledge of Xactimate or similar estimating software is a must, • WRT, ASD, IICRC is a plus, • Exceptional organization and time management skills, • Self-motivated, highly accountable, and committed to continual self-development, • BA/BS preferred in construction management, or equivalent experience. Financial Management: • Maintain full P&L responsibility for the Houston branch., • Manage budgets, forecasting, revenue targets, and expense controls., • Review job costing, gross margins, accounts receivable, and collection efforts., • Partner with finance and operations teams to improve cash flow and reduce aging receivables. Leadership & Team Development: • Recruit, coach, mentor, and develop department managers and field personnel., • Conduct regular performance reviews and provide ongoing feedback and development opportunities., • Foster a culture of accountability, teamwork, safety, and operational excellence., • Lead employee engagement initiatives and retention efforts. Sales & Business Development: • Partner with Business Development Representatives and Sales teams to drive market growth., • Build and maintain relationships with insurance carriers, adjusters, property managers, commercial clients, and referral partners., • Support catastrophe response efforts and large-loss opportunities., • Identify new business opportunities and expansion strategies within the Houston market. Preferred Qualifications: • IICRC Certifications (WRT, ASD, AMRT, FSRT, OCT, or related)., • OSHA 10 or OSHA 30 Certification., • Experience managing large-loss commercial restoration projects., • Experience with acquisitions, integrations, or multi-location operations., • Sales Force experience, Physical Requirements: • Ability to travel to job sites, client meetings, and branch locations as needed., • Ability to work extended hours during emergency response and catastrophe events., • Ability to occasionally lift to 25 pounds. To apply for this position, submit resume to ana@employeemagnets.com

Job Description About Integrated Real Estate Group (IREG) Innovation Through Integration. Integrated Real Estate Group (IREG) is a vertically integrated real estate company with more than 1,200 employees across 46+ communities - and growing. For over 20 years, we’ve developed and operated multifamily and senior living communities across Texas and Oklahoma, delivering more than 15,000 units and $2 billion in total development. What sets IREG apart is our integrated approach, bringing together development, construction, and operations to create high-performing communities across affordable housing, workforce housing, and market-rate living, including multifamily, active adult, independent living, assisted living, and memory care. At IREG, innovation isn’t just what we build, it’s how we operate, grow, and develop our people. We build communities and develop the people who lead them. Location: Watercrest at Shadow Creek Ranch Employment Type: Full-Time Lead the Operations That Keep Our Community at Its Best Integrated Real Estate Group (IREG) is seeking an experienced Director of Property Maintenance at Watercrest at Shadow Creek Ranch to lead all maintenance operations for one of our senior living communities. This role is responsible for preserving the safety, appearance, and functionality of the community while leading a maintenance team dedicated to delivering an exceptional living experience for our residents. As the Director of Property Maintenance, you will oversee preventive maintenance programs, capital and repair projects, vendor relationships, regulatory compliance, and daily maintenance operations. This is a hands-on leadership position that balances strategic planning with day-to-day operational execution. Key ResponsibilitiesMaintenance & Property Operations • Direct all daily maintenance operations for the community, including preventive maintenance, repairs, inspections, and emergency response., • Maintain the community, grounds, apartments, and common areas to the highest operational and aesthetic standards., • Oversee apartment turns, ensuring residences are move-in ready on schedule.Building Systems, • Oversee maintenance and repair of HVAC, plumbing, electrical, mechanical, carpentry, irrigation, pool, and building systems., • Coordinate inspections and maintenance of life safety systems, including fire alarms, sprinkler systems, elevators, generators, and emergency equipment., • Troubleshoot complex maintenance issues and coordinate specialty repairs with approved vendors.Leadership & Team Development, • Lead, coach, and develop the maintenance team while fostering a culture of accountability, safety, and exceptional customer service., • Prioritize work orders and assign daily responsibilities to ensure timely completion., • Participate in hiring, onboarding, scheduling, performance management, and ongoing team development., • Participate in an on-call rotation to support emergency maintenance needs.Vendor & Project Management, • Manage vendor relationships and oversee contractor performance for specialized services and capital improvement projects., • Maintain maintenance inventory, equipment, tools, and supply levels., • Coordinate purchasing and procurement to support efficient community operations.Budget & Compliance, • Assist in developing and managing the maintenance operating budget., • Monitor expenses while identifying opportunities to improve efficiency and reduce operating costs., • Ensure compliance with OSHA standards, life safety regulations, company policies, and applicable local, state, and federal requirements., • Maintain accurate maintenance records, inspections, work orders, and regulatory documentation.QualificationsRequired, • High school diploma or GED., • Three or more years of maintenance leadership experience in senior living, multifamily, hospitality, healthcare, or commercial property management., • Strong working knowledge of HVAC, plumbing, electrical, mechanical, carpentry, and general building maintenance., • Experience leading maintenance teams and managing outside vendors., • Excellent organizational, problem-solving, and communication skills.Preferred, • Associate degree or vocational training in HVAC, electrical, mechanical systems, refrigeration, plumbing, engineering technology, or a related trade., • EPA/HVAC Certification., • Certified Pool Operator (CPO) certification., • Additional trade certifications are a plus., • Experience with life safety systems and regulatory compliance within senior living or healthcare environments.Why You'll Love Working at IREG At Integrated Real Estate Group, we're committed to creating communities where residents feel at home and employees can build rewarding careers. You'll join a collaborative leadership team that values integrity, service, accountability, and continuous improvement while making a meaningful impact on the lives of our residents every day. Compensation & Benefits At IREG, we invest in our people, because strong leaders build strong communities. Full-Time Employees receive: • Competitive salary with growth potential, • Paid Holidays available upon hire, • ZayZoon Access available immediately - access up to 50% of your earned wages on demand, • Paid Time Off (PTO) eligibility after 90 days to support work-life balance, • Comprehensive Medical, Dental, and Vision Insurance effective the 1st of the month following 30 days of employment, • Life Insurance, Disability, and Financial Protection Plans (Critical Illness, Accident Coverage, Legal & ID Theft Protection), • Education Assistance to support your long-term career growth, • Employee & Resident Referral Bonuses, • Exclusive Employee Rent Discounts at IREG multifamily communities We’re committed to providing stability, growth, and meaningful benefits that support your career and your life. Why IREG Integrated Real Estate Group is a leader in senior living and multifamily housing, focused on building high-performing communities through strong leadership, operational excellence, and a commitment to resident experience. We’re growing - and we’re looking for people who want to grow with us. Equal Opportunity Employer Integrated Real Estate Group is an Equal Opportunity Employer and participates in E-Verify for employment authorization verification. Ready to build the leadership engine that powers our future growth? Apply today. #IND2 Powered by JazzHR W3JQGD1tXq

Job Description Sheet Metal Fabricator • Houston, TX, USA, • We offer competitive pay based on experience, plus bonus pay and commission., • Full Time, • We also take care of our team by offering: A 401(k) plan, Health insurance, Paid time off (PTO), Employee discounts, Paid training, A referral program. Are you a skilled craftsman with a passion for creating custom sheet metal components? Are you looking for a full-time opportunity with a reputable company? If so, we have the perfect position as a Sheet Metal Fabricator with advanced positions at Lords Chimney in Houston, TX! Apply now and take the next step in your career. WHY YOU SHOULD JOIN US At Lords Chimney, we value our employees and offer a range of benefits to enhance your work experience. As a Sheet Metal Fabricator, you'll enjoy: • Competitive pay ranging from $15-$18 hourly, • 401(k) plan, • Health Insurance, • Paid time off(PTO), • Employee discounts, • Paid training, • A referral program Don't miss out on this opportunity to join our exceptional team. Apply today! ABOUT HALES CHIMNEY & FIREPLACE SOLUTIONS Lords Chimney has received a number of notable distinctions and has been keeping fireplaces and dryer vents of the greater Houston area clean and efficient for the last decade. We train our team members extensively and continuously add to their knowledge through industry leaders like the National Chimney Sweep Guild (NSCG) and the Chimney Safety Institute of America (CSIA). Being a part of our team, you receive extensive fire safety, product knowledge, and customer service training, so you're prepared to answer any questions clients may have. As one of our company's own, you have the tools, knowledge, and experience to help. Our team is friendly, honest, knowledgeable, and professional. We are dedicated to creating a company that has a friendly and enthusiastic environment! ARE YOU THE SHEET METAL FABRICATOR WE'RE LOOKING FOR? Ask yourself: Can you work under pressure and thrive in a fast-paced environment? Do you have excellent communication skills, both written and verbal? Can you work without direct supervision? Are you a trustworthy individual with strong time management skills? If you answered "yes" to these questions and meet the following requirements, we need you as our Sheet Metal Fabricator! • 2+ years of experience in sheet metal fabrication preferred, • Valid driver's license and a good driving record ADVANCE YOUR CAREER TODAY! Don't miss out on this opportunity to advance your career as a Sheet Metal Fabricator. Apply now and take the first step toward joining our exceptional team. Our initial application process is quick, easy, and mobile-friendly. We look forward to reviewing your application and potentially welcoming you to the Hales Chimney & Fireplace Solutions family! Job Posted by ApplicantPro

Job Description About Us: Advantage Interests Inc., an Eagle Fire owned company, is a leading provider of industrial fire protection, fire alarm, and fire & gas detection solutions serving commercial, industrial, energy, and hazardous environment applications throughout the Gulf Coast region. Backed by the strength and resources of Eagle Fire Inc., we continue to expand our engineered systems capabilities and are seeking a Fire & Gas Systems Designer / Engineer to join our Houston, Texas team. This is a unique opportunity to work on specialized industrial fire and gas detection systems supporting critical infrastructure, industrial facilities, manufacturing operations, and energy-related environments. Why Work With Us? In addition to competitive compensation and benefits, employees enjoy: $2,000 Employee Referral Program Tuition Reimbursement NICET Test Reimbursement Employee Assistance Program 10 Paid Holidays Career Growth & Advancement Opportunities Industry Training & Development Long-Term Stability with a Growing Organization Position Summary The Fire & Gas Systems Designer / Engineer is responsible for the design and development of industrial fire and gas detection systems, including combustible gas detection, toxic gas detection, flame detection, and integrated fire alarm systems. This role works closely with project managers, engineers, operations personnel, and customers to develop code-compliant system layouts, technical drawings, and engineered solutions for industrial and hazardous environments. The ideal candidate will possess strong technical aptitude, AutoCAD experience, and knowledge of industrial fire protection, instrumentation, or integrated safety systems. Responsibilities Design industrial fire and gas detection systems for commercial and industrial facilities Prepare system layouts, schematics, wiring diagrams, and installation drawings using AutoCAD Support selection and application of combustible gas, toxic gas, flame, smoke, and heat detection technologies Assist with integration of fire & gas systems with fire alarm, suppression, PLC, DCS, and industrial control systems Interpret and apply applicable NFPA, API, ISA, and local code requirements Review customer specifications and project requirements to develop compliant system designs Coordinate with project managers, engineers, contractors, and customers throughout project execution Support serial and network communications interfacing between field devices and control equipment Maintain organized project documentation and design records Participate in technical troubleshooting and problem-solving activities as needed Qualifications Preferred Education & Experience Associate's or Bachelor's degree in Electrical Engineering, Mechanical Engineering, Computer Science, Engineering Technology, or related technical field preferred Experience with fire alarm, fire detection, or gas detection system design preferred Experience in industrial, oil & gas, manufacturing, petrochemical, or EPC environments preferred Knowledge of hazardous location installations preferred Skills & Knowledge Knowledge of combustible gas, toxic gas, flame, and fire detection systems Familiarity with NFPA, API, and ISA standards Experience with serial and network interfacing preferred Proficiency with AutoCAD, Microsoft Excel, and Microsoft Word Strong technical, analytical, and problem-solving abilities Ability to read and interpret technical drawings and specifications Strong communication and organizational skills Preferred Certifications NICET Certification in Fire Alarm Systems preferred ISA-related training or certifications preferred In compliance with the Drug-Free Workplace Act of 1988, we maintain a drug-free workplace and operate a Drug-Free Workplace program. Advantage Interests Inc., an Eagle Fire owned company, is an Equal Opportunity Employer.

Job DescriptionDescription: Fulton is a private multi-national group of companies headquartered in Pulaski NY, USA. Our founder, Lewis Palm, was a pioneer in the engineering of steam boilers and associated equipment for the laundry and dry-cleaning markets, he invented the first Vertical Tubeless Boiler in 1949. With our expansion of products and knowledge throughout the years, we are well known in many applications of your daily life including but not limited to, food processing, pharmaceutical, education, gas processing, laundry, dry cleaning, healthcare and government/military. Fulton researches, engineers, manufactures, sells and services complex thermal fluid, steam and hydronic equipment along with engineered systems for a wide range of commercial and industrial applications. We strive for energy efficiencies, global impact, and environmental responsibility. Fulton has serves as an industry leader of emerging heat transfer technologies for more than 75 years! Our culture thrives on HEART values of the company and puts pride in our people. We encourage continued training and learning to grow you and your career at Fulton. HEART: Honesty and Integrity Effective and Results Oriented Always customer focused Respectful and considerate Team Player Requirements: The Assembler II position overall responsibility is responsible for performing electrical and mechanical Assembly of boilers and skids and all associated equipment along with testing on all safety and operating parameters of the manufactured equipment. Test Fire technician is responsible to provide all support and service in a lean manner that is consistent with the company values and operating philosophy. ACCOUNTABILITIES; • Assemble boilers and skids according to drawings and instruction using hand tools and power tools., • Connect pipe, pipe fittings, conduit and wiring according to drawings and knowledge., • Follow all safe working practices working with hand tools, machines and vehicles., • Maintain a clean and organized work environment., • General assembly knowledge of parts associated with standard and custom products., • Work with live power as needed provided all safety measures are met., • Ensure equipment performs within the guidelines., • Basic quality assurance., • Complete all required documentation and communication associated., • Perform other duties as required. QUALIFICATIONS: • Previous Service Technician experience preferred but not required., • Ability to layout and bend conduit along with pulling and terminate wires., • Ability to thread and assemble pipe., • Ability to read mechanical drawings., • Ability to read an assembly drawing., • Ability to work independently., • High School Diploma or GED., • Fulton Safety Training (crane, tow motor, fire, etc.) DEMONSTRATED CRITICAL COMPETENCIES • Communication - Ability to ensure information is passed on to others who should be kept informed. Ability to express oneself clearly in conversation and interaction with others. Ability to express oneself clearly in business writing., • Building Collaborative Relationships - The ability to develop, maintain and strengthen partnerships with others inside and outside the organization who can provide information, assistance and support., • Analytical Thinking - The ability to tackle a problem by using logical, systematic and sequential approach., • Technical Expertise - The ability to demonstrate depth of knowledge and skill in a technical area., • Thoroughness - Ensuring work and information is complete and accurate; following up with others to ensure that agreements and commitments have been fulfilled., • Stress Management - The ability to keep functioning effectively when under pressure., • Personal Credibility - Demonstrated concern that one be perceived a responsible, reliable and trustworthy.

Job DescriptionEnlist as a Soldier into the United States Army and As a Petroleum Laboratory Specialist, you'll supervise and conduct laboratory tests on petroleum, oil, and lubricant products to ensure fire prevention and safety control for our troops, to ensure they meet the Army’s requirements, and our Soldiers can depend on them. You’ll train to perform physical and chemical tests on turbine aviation fuels, diesels and motor gasolines, and kerosene-based and diesel fuels in the field. Additionally, safety and fire prevention will be a daily form of life while working this job. This is not a civilian contractor position. No experience necessary. Position is entry level. REQUIREMENTS: • A U.S. citizen or permanent resident with a valid Green Card, • 17 to 34 Years Old, • High School Diploma or GED, • Meet Tattoo Guidelines, • No Major Law Violations, • No Medical Concerns TESTING & CERTIFICATIONS:, • 36 Nationally Recognized Certifications Available, • 10 weeks of Basic Training, • 7 weeks of Advanced Individual Training, • 91 ASVAB Score: Skilled Technical (ST) SKILLS YOU'LL LEARN:, • Lab Equipment Operations, • Chemistry & Mathematics, • Testing & Inspection BENEFITS: Financial Benefits:, • Salary and Bonuses: Competitive base pay with potential for bonuses, including enlistment bonuses and re-enlistment bonuses., • Retirement Plan: Thrift Savings Plan (TSP) similar to a 401(k), and a pension plan for those who serve 20 years or more., • Special Pays: Extra pay for hazardous duty, special skills, and deployment. Healthcare:, • Medical Coverage: Comprehensive medical care for soldiers and their families through TRICARE., • Dental and Vision: Access to dental and vision care services. Education:, • Tuition Assistance: Financial support for college courses while on active duty., • GI Bill: Benefits for education and training programs, including the Post- 9/11 GI Bill., • Student Loan Repayment: Assistance in repaying student loans. Housing and Living:, • Housing Allowance: Basic Allowance for Housing (BAH) to cover the cost of housing., • On-Base Housing: Access to housing on military installations., • Commissary and Exchange: Discounts on groceries and goods at military stores. Career and Training:, • Professional Development: Opportunities for leadership training and career advancement., • Skill Training: Technical and tactical training in various fields. Family Support:, • Family Programs: Support services for families, including counseling and childcare., • Relocation Assistance: Help with moving costs and finding housing. Retirement and Veterans Benefits:, • Pension: Lifetime monthly pension after 20 years of service., • VA Benefits: Access to Department of Veterans Affairs benefits, including healthcare and home loans. Recreation and Leisure:, • Morale, Welfare, and Recreation (MWR): Access to recreational facilities, sports programs, and leisure activities.

Job Description Role and Responsibilities • Safety Inspections: Conduct regular safety inspections of facilities, equipment, machinery, and work areas to ensure compliance with safety standards and regulations (e.g., OSHA, EPA)., • Incident Reporting and Investigation: Assist in the reporting, documenting, and investigating workplace accidents, near misses, or safety incidents. Collect data, analyze root causes, and help develop corrective actions., • Safety Training: Support the implementation and delivery of safety training programs for all employees. This may include training on proper use of PPE, safe machine operation, emergency procedures, and hazard recognition., • Compliance Monitoring: Monitor and ensure adherence to safety policies, procedures, and local, state, and federal regulations. Assist in preparing for safety audits or inspections by regulatory agencies., • Personal Protective Equipment (PPE): Assist in the selection, inspection, and distribution of PPE to employees. Ensure that appropriate PPE is being used at all times and maintain accurate records of PPE compliance., • Risk Assessment: Assist in identifying potential hazards in the workplace (chemical, physical, environmental) and recommend solutions to mitigate risks and improve safety practices., • Emergency Response: Support emergency response plans, assist in evacuation drills, and ensure that employees are aware of emergency procedures, including fire safety, first aid, and chemical spill response., • Documentation and Reporting: Maintain accurate records related to safety activities, inspections, training, incident reports, and safety compliance. Prepare reports for management as needed., • Hazardous Material Management: Assist in the safe storage, labeling, and disposal of hazardous materials in compliance with safety regulations. Monitor handling of hazardous substances to ensure proper precautions are followed., • Safety Audits: Participate in internal safety audits, assist in implementing improvements based on audit findings, and track the effectiveness of corrective actions., • Safety Equipment Maintenance: Ensure that safety equipment such as fire extinguishers, alarms, eyewash stations, and first-aid kits are properly maintained and operational., • Communication: Serve as a safety resource for employees, providing guidance and answering questions about safety procedures, equipment, and best practices. Qualifications and Education Requirements • High school diploma or GED required. Associate’s degree or certification in Occupational Safety and Health, Environmental Health, or a related field is preferred., • Minimum of 1-3 years of experience in an industrial or manufacturing environment, with a focus on safety, environmental health, or risk management. Preferred Skills: • Knowledge of safety standards and regulations, including OSHA, EPA, and industry-specific guidelines., • Ability to perform safety inspections and identify potential hazards., • Strong communication skills, both written and verbal, for delivering training and reporting safety findings., • Familiarity with safety equipment, tools, and personal protective equipment (PPE)., • Strong attention to detail and organizational skills., • Ability to work independently and as part of a team., • Basic understanding of hazardous materials handling and emergency response procedures. Physical Requirements • Works in an industrial setting, including factories, plants, or construction sites., • Ability to lift heavy materials (up to 50 lbs)., • Ability to walk, stand, and inspect work areas for extended periods., • Physical labor may be required, including the ability to lift and move equipment or materials., • Personal protective equipment (PPE) must be worn at all times for safety., • Shift work or overtime may be required based on project deadlines., • The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses/spoggles, respirators, ear plugs, steel toed shoes, or other protective equipment as required by the work performed and location the work is being done. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employment at Thorpe Plant Services, Inc. is on an “at-will” basis. There is no contract of employment between Thorpe Plant Services, Inc. and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Thorpe Specialty Services and its affiliates provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.