Trabajos industrial maintenance en Syracuse, New YorkCrear alertas

Job Description Robison Contracting Incorporated (RCI) is a construction firm focused on Building America’s Infrastructure. Specifically, RCI is focused on the electric utility sector. We are developing a team of dedicated electrical technicians to help us commission and perform service and maintenance on Utility Scale Central Solar (PV) Inverters and Energy Storage Systems. RCI’s founders are performance driven leaders looking to build our team around our P.R.O. model. People, Resources, and Opportunity. RCI is always building the team with the right People. The right people buy into the culture, are competent, and take ownership of their work & community. RCI will provide paid training to technicians with an electrical background. This position will be 100% travel as we are building a dedicated team of specialists to travel to various project locations, perform their duties, and move on to the next. RCI technicians will work on multi-employer work sites and need to represent RCI's team and clients with the highest level of integrity and professionalism. It is not always the case, every project is different, however, technicians should be prepared to work long hours, with a potential to work more than 65 hours in a given work week. Qualified candidates shall be prepared to travel, have experience with troubleshooting electrical equipment, crimping data cables, software uploads, use a computer and use PPE properly around electrical equipment. Preferred Experience working in electrical utility/industrial environments: • Minimum of a basic background in electrical equipment & distribution systems (120V to 480V); this should include proper training & use of PPE equipment for the systems being worked on., • Prefer minimum of five (5) years’ experience working with electrical systems., • Ability to diagnose & troubleshoot electrical systems, use multimeter, and test & make data cables., • Job related technical knowledge of electrical systems such as panelboards, switchboards, generators, UPS systems, DC voltage systems, fire alarm systems, etc., • Ability to communicate effectively with audiences that include but are not limited to customer, management, coworkers, clients, vendors, contractors, and visitors., • Ability to attend to detail and work in a time-conscious and time-effective manner., • Ability to use/develop troubleshooting techniques for various electrical/mechanical systems in both standard and high-stress situations. Other Job Requirements Tasks will include physical labor; examples include working on ladders, ability to carry minimum 65lbs, use of PPE equipment, ability to obtain forklift/manlift operator’s license, etc. Working conditions include various levels of environmental conditions including but not limited to generally favorable indoor workspace, outdoor workspaces, moving mechanical parts and vibration; high, precarious places, fumes or airborne particles and extreme temperatures and high noise levels. Travel to required location. Travel will vary depending on the project and location. For most, this is a 100% travel position. Preferred Qualifications OSHA 10 or higher. Obtained TWIC. PowerSafe Training for Electrical Utilities. Must have good verbal and written English communications skills. Work effectively with multi-cultural personnel to execute work assignments. Strong interpersonal and mentoring skills and organizational accountability processes Good multi-tasking skills Proficient in MS-Office programs or G-Suite RCI is a Drug Free Workplace, all applicants should be aware RCI's customers often require a drug test prior to working on their project site. RCI technicians could be drug tested multiple times in a given year. RCI may also require a background check prior to submitting an offer. RCI is an equal opportunity employer that recognizes the value of a diverse workforce. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

Job Description With over 60 years of experience, we pride ourselves on delivering top-tier service and being a trusted generator distributor. We are seeking a dedicated Shop and Facilities Technician to join our growing team! If you're passionate about hands-on work and enjoy contributing to a dynamic environment, we encourage you to apply! This position plays a key role in maintaining a clean, organized, and safe shop environment while ensuring our technicians have access to the tools and resources they need. The Shop Technician is also responsible for facility maintenance, vendor coordination, and providing backup support to the Parts Department as needed. Key Responsibilities: • Maintain an organized, clean, and safe shop and stockroom., • Safely handle shipping and receiving duties using a powered industrial truck., • Conduct regular facility audits and ensure a safe, healthy work environment., • Support Field Service Technicians with parts deliveries, oil and coolant replenishment, and used oil disposal in compliance with regulations., • Assist technicians on jobs as needed., • Coordinate with external vendors for building maintenance, housekeeping, and waste management., • Perform routine maintenance and repairs on facility and grounds., • Assist the Parts Department with orders, inventory management, and parts lookups., • Support emergency response efforts within and outside company territories as needed., • Cross-train to provide backup support for the Parts Coordinator position as needed., • Other duties as assigned. Preferred Experience: • High school diploma or equivalent., • Minimum 1-2 years of related experience; equivalent combinations of education and experience considered., • Valid driver’s license with the ability to obtain DOT medical certification., • OSHA 10 or OSHA 30 certification (as required by local regulations)., • Forklift certification (or ability to obtain)., • Strong integrity, urgency, and results-driven approach to work., • Ability to work flexible hours, including nights, weekends, and on-call shifts., • Comfortable working in varying weather conditions and environments., • Excellent communication and problem-solving skills., • Proficiency with computers; Microsoft Office experience is a plus., • Mechanical inclination preferred; knowledge of diesel and gas engines is beneficial., • Strong organizational skills and attention to detail. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. The anticipated compensation range for this position is $23.00 to $26.00 hourly. Actual compensation may vary based on skills, experience, certifications, location, and other business-related factors. Kinsley Group offers a comprehensive benefits package that may include medical, dental, and vision insurance, company-paid life insurance, disability coverage, paid time off, paid holidays, 401(k) with company match, employee assistance programs, and other company-sponsored benefits. Compensation details: 23-26 Hourly Wage PI6ec03d892341-25405-41119862

Job Description IMMEDIATLY HIRING FORKLIFT OPERATOR ROLE PAY $21.50/HR START ASAP! Responsibilities • Operate forklifts and other lift trucks in a constant state of alertness, following all material handling and safety requirements to move, distribute, ship, and receive parts and equipment., • Work safely at elevated heights up to 50 feet while handling materials and performing warehouse tasks., • Maintain a strong safety focus by applying knowledge of sling, hoist, and crane operations when moving materials., • Perform stocking duties to address and resolve complex warehouse or factory capacity issues., • Keep accurate records of all material transactions and conduct audits to ensure overall inventory levels remain correct., • Investigate and reconcile inventory discrepancies and ensure all department records are complete and accurate., • Use a computer and handheld RF scanner to track inventory movements and update system records in real time., • Complete regular cycle counts to maintain and verify inventory accuracy., • Support production systemdriven processes and activities by ensuring materials are available and correctly positioned for operations., • Follow written work instructions in English and adhere to all safety and operational procedures., • Handle materials using pallet jacks and other material handling tools as needed. Essential Skills • Ability to operate forklifts and other powered industrial vehicles safely, or willingness to learn and follow training., • Ability to work in a constant state of alertness and maintain a strong focus on safety., • Comfort working at elevated heights up to 50 feet., • Knowledge of or ability to learn sling, hoist, and crane operations to move materials safely., • Ability to use a computer and handheld RF scanner for inventory tracking., • Ability to read and understand English and follow written and verbal work instructions., • Ability to perform physical tasks including stooping, bending, twisting, turning, squatting, reaching, pushing, pulling, grabbing, and grasping., • Ability to safely lift up to 50 pounds on a regular basis., • Attention to detail and accuracy in recordkeeping and inventory control. Additional Skills & Qualifications • Previous experience with powered industrial vehicle (PIV) operation preferred but not required., • Prior manufacturing or warehouse experience preferred., • Experience using RF scanners, pallet jacks, and other material handling equipment is an asset., • Familiarity with inventory control processes such as cycle counting and transaction auditing is beneficial., • Comfort working in a fast-paced, production-oriented environment. Why Work Here? You join a stable, production-focused operation where safety, accuracy, and teamwork are highly valued. The role offers consistent daytime hours, allowing for predictable work-life balance during the week. You gain hands-on experience with modern material handling equipment and inventory systems, building skills that are highly transferable across logistics, manufacturing, and warehouse environments. You work alongside a supportive team that relies on clear processes and established production systems, giving you the structure and tools needed to succeed. Work Environment This position is based in a warehouse and production environment that uses modern material handling equipment, including forklifts, pallet jacks, RF scanners, and computer-based inventory systems. You will work on the 1st shift, Monday through Friday, from 6:00 a.m. to 2:30 p.m. The role involves working around powered industrial vehicles, stored materials at various heights, and active production areas. The environment requires frequent physical activity such as lifting up to 50 pounds, bending, twisting, and working at elevated heights up to 50 feet. You should expect to wear appropriate work attire and any required personal protective equipment suitable for a warehouse and material handling setting. Job Type & Location This is a Contract to Hire position based out of East Syracuse, NY. Pay and Benefits The pay range for this position is $21.50 - $21.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of East Syracuse, NY. Application Deadline This position is anticipated to close on Oct 29, 2026. Workplace Type This is a fully onsite position in East Syracuse,NY. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description IMMEDIATLY HIRING FORKLIFT OPERATOR ROLE PAY $21/50/HR START ASAP! Responsibilities • Operate forklifts and other lift trucks in a constant state of alertness, following all material handling and safety requirements to move, distribute, ship, and receive parts and equipment., • Work safely at elevated heights up to 50 feet while handling materials and performing warehouse tasks., • Maintain a strong safety focus by applying knowledge of sling, hoist, and crane operations when moving materials., • Perform stocking duties to address and resolve complex warehouse or factory capacity issues., • Keep accurate records of all material transactions and conduct audits to ensure overall inventory levels remain correct., • Investigate and reconcile inventory discrepancies and ensure all department records are complete and accurate., • Use a computer and handheld RF scanner to track inventory movements and update system records in real time., • Complete regular cycle counts to maintain and verify inventory accuracy., • Support production systemdriven processes and activities by ensuring materials are available and correctly positioned for operations., • Follow written work instructions in English and adhere to all safety and operational procedures., • Handle materials using pallet jacks and other material handling tools as needed. Essential Skills • Ability to operate forklifts and other powered industrial vehicles safely, or willingness to learn and follow training., • Ability to work in a constant state of alertness and maintain a strong focus on safety., • Comfort working at elevated heights up to 50 feet., • Knowledge of or ability to learn sling, hoist, and crane operations to move materials safely., • Ability to use a computer and handheld RF scanner for inventory tracking., • Ability to read and understand English and follow written and verbal work instructions., • Ability to perform physical tasks including stooping, bending, twisting, turning, squatting, reaching, pushing, pulling, grabbing, and grasping., • Ability to safely lift up to 50 pounds on a regular basis., • Attention to detail and accuracy in recordkeeping and inventory control. Additional Skills & Qualifications • Previous experience with powered industrial vehicle (PIV) operation preferred but not required., • Prior manufacturing or warehouse experience preferred., • Experience using RF scanners, pallet jacks, and other material handling equipment is an asset., • Familiarity with inventory control processes such as cycle counting and transaction auditing is beneficial., • Comfort working in a fast-paced, production-oriented environment. Why Work Here? You join a stable, production-focused operation where safety, accuracy, and teamwork are highly valued. The role offers consistent daytime hours, allowing for predictable work-life balance during the week. You gain hands-on experience with modern material handling equipment and inventory systems, building skills that are highly transferable across logistics, manufacturing, and warehouse environments. You work alongside a supportive team that relies on clear processes and established production systems, giving you the structure and tools needed to succeed. Work Environment This position is based in a warehouse and production environment that uses modern material handling equipment, including forklifts, pallet jacks, RF scanners, and computer-based inventory systems. You will work on the 1st shift, Monday through Friday, from 6:00 a.m. to 2:30 p.m. The role involves working around powered industrial vehicles, stored materials at various heights, and active production areas. The environment requires frequent physical activity such as lifting up to 50 pounds, bending, twisting, and working at elevated heights up to 50 feet. You should expect to wear appropriate work attire and any required personal protective equipment suitable for a warehouse and material handling setting. Job Type & Location This is a Contract to Hire position based out of East Syracuse, NY. Pay and Benefits The pay range for this position is $21.50 - $21.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Syracuse,NY. Application Deadline This position is anticipated to close on Oct 23, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Superior Metals Manufacturing is currently looking for a Technical Director to join our team! If you’re looking to join a company positioned for strong growth - with real opportunities to advance - Superior Metal Manufacturing may be the place for you. We’re proud to offer a competitive compensation package, outstanding benefits, and the chance to work in a state-of-the-art facility alongside a skilled and collaborative team. Location: Chittenango, NY Employment Type: Full-Time Salary: $170,000-$220,000 but will be evaluated depending on candidates’ knowledge, skills, and abilities. Job Summary: Reporting directly to the General Manager, the Technical Director serves as the site's senior metallurgical leader and technical authority for all specialty alloy production activities. This role is responsible for providing strategic and operational leadership related to superalloy design, chemistry control, vacuum induction melting practices, raw material utilization, process optimization, and technical problem-solving. The Technical Director partners closely with Operations, Quality, Purchasing, and Commercial teams to ensure products consistently meet customer requirements while driving continuous improvement in quality, yield, and manufacturing performance. This position also serves as the primary technical liaison for customers, suppliers, and affiliated CPP sites on metallurgical matters. Essential Job Functions/Duties: • Serve as the site's primary technical authority on superalloy metallurgy, alloy development, chemistry control, and specialty melting processes., • Lead, develop, and manage the Engineering team by establishing priorities, setting performance expectations, providing coaching and mentorship, and ensuring alignment with business objectives., • Provide technical leadership for alloy targeting, specification development, trace element management, raw material/revert utilization, consumables definition, and melting and processing activities to ensure compliance with all customer and internal requirements., • Partner and provide central technical leadership to each of the CPP casting sites, working to optimize SMM’s processes and products to achieve industry-leading performance and yield for castings made from SMM alloy, • Lead a culture of cleanliness, precision, and process control across all aspects of SMM engineering and operations, • Direct and support all technical aspects of Vacuum Induction Melting (VIM), including process optimization, heat reviews, troubleshooting, and resolution of issues impacting product quality and furnace performance., • Lead metallurgical investigations and Root Cause Corrective Action (RCCA) activities related to process deviations, product quality concerns, and alloy performance issues, from discovery through validation of results., • Drive continuous improvement initiatives to enhance yield, process capability, and manufacturing efficiency., • Identify, evaluate and implement new technologies, equipment, and processing methods that improve operational performance and product quality., • Provide technical oversight for raw material qualification, supplier development, and disposition activities related to raw materials and revert inventories., • Serve as the primary technical liaison for customers, supporting specification reviews, contract reviews, audits, quality concerns, and metallurgical inquiries., • Partner with Operations, Quality, Purchasing, Maintenance, and Commercial teams to align technical initiatives with business objectives and customer requirements., • Lead technical meetings and provide mentorship and training to enhance metallurgical knowledge and process understanding across the organization., • Support capital projects, new process development, and strategic initiatives through the application of sound metallurgical principles and technical expertise., • Promote compliance with all safety, quality, regulatory, and company policies and procedures., • Perform other duties and special projects as assigned., • Ability to work at the Chittenango facility Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Education: • Minimum of a bachelor’s degree in Metallurgical Engineering, Materials Science Engineering, or a related field required., • Advanced degree preferred Experience:, • Minimum of 10+ years of progressively responsible experience in specialty metals, superalloys, vacuum melting, or related metallurgical manufacturing environments., • Demonstrated expertise with nickel-based superalloys and specialty alloy systems., • Significant experience supporting Vacuum Induction Melting (VIM) operations required., • Experience leading technical investigations, RCCA activities, and process improvement initiatives., • Six Sigma Black Belt certification or equivalent strongly preferred, • Previous leadership experience preferred. Other Required Knowledge, Skills, & Abilities:, • Working knowledge of industrial engineering fundamentals: process flow analysis, time studies, capacity planning, facility layout, and cost analysis., • Process simulation experience is preferred, including building and analyzing discrete-event simulation models in FlexSim; experience with comparable tools (e.g., Simio, Arena, AnyLogic) is acceptable, and academic or co-op project experience is acceptable for recent graduates., • Demonstrated interest in automation, controls, and programming, and willingness to work hands-on in a manufacturing environment, including on the shop floor., • Exposure to PLC or HMI programming (e.g., Allen-Bradley ladder logic) and programming or scripting in any language (e.g., Python, structured text, C) is preferred., • Familiarity with electrical and electronics fundamentals, industrial sensors, or robotics, and proficiency with CAD software for layout development (e.g., AutoCAD, SolidWorks), are preferred., • Lean Manufacturing or Six Sigma training, data systems or SQL exposure, and prior manufacturing, casting, or machining experience are pluses., • U.S. Person status (U.S. citizen, permanent resident, refugee, or asylee) is required due to ITAR regulations. Why Join Us? Innovative Environment: Work in a state-of-the-art melt shop. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, bonuses and more. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: _ Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. #Aerospace #Metallurgy #Manufacturing #Engineering EOE/M/F/DISABLED/VETERANS This is a management position This is a full time position Pay Range: $170,000-$220,000

Join Our Team as a Manufacturing Manager!!! Consolidated Precision Products (CPP) is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. We offer: Innovative Environment: Work in a world class investment casting site supporting the aerospace and industrial gas turbine industry. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $70,000 - $100,000 For more information, please visit _ JOB SUMMARY The primary function of this position is to support team members to meet daily safety, quality, and production requirements. The following factors serve as expectations, and will be used to measure the relative performance for individuals in the Manufacturing Manager role: • Work with Team members and other leaders to monitor standards of work and process flow within the department or work area to meet production and customer requirements., • Responsible to execute goals and objectives for the plant. PRIMARY RESPONSIBILITIES • Lead the activities of team members of production of quality parts in accordance with work instructions and company policy to ensure a quality product delivered on time., • Responsible for maintaining safety standards as required by law and company policy., • Coach and provide technical expertise to resolve issues and create and ensure corrective action(s) are implemented., • Ensure the appropriate level of accountability for goals and objectives at the team member levels., • Monitor and take appropriate timely improvement action to meet production quality and quantity., • Utilize problem solving techniques, teamwork building strategies, process control, and continuous process improvement tools to meet or exceed the operating goals/metrics., • Facilitate team member workflow management, workforce scheduling and team member placement to ensure the facility and company goals are successfully met or exceeded., • Maintain adherence to company policies, safety standards and good housekeeping practices., • Responsible for the completion of Accident Investigation forms in areas of responsibility, • Responsible for implementation of safety countermeasures and doing root cause analysis to determine appropriate safety changes that are needed to improve plant safety., • Responsible to adhere to all site safety policies and procedures., • Coach and model safe behaviors, respect for environment and 6S behaviors., • Champion safety practices at the site. QUALIFICATIONS • Education: High School Diploma or General Education Degree (GED), • Experience: Manufacturing experience required., • Other Required Knowledge, Skills & Abilities:, • LANGUAGE SKILLS - Ability to read, understand and comprehend documents such as safety rules, operating and maintenance instructions, procedure manuals, Oracle reports and Internal Method Sheets (IMS). Ability to carry out instructions in written, oral or diagram form. Excellent team skills and ability to interact with other employees, engineers, and leadership. Ability to report progress and work with engineers to solve issues., • MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • REASONING ABILITY - Ability to deal with problems involving several concrete variables in standardized situations., • COMPUTER SKILLS - Knowledgeable of Microsoft Office and Manufacturing software WORKING ENVIRONMENT • The noise level in the work environment is usually moderate. Safety requirements for this position are safety glasses and steel-toed work boots., • Physical Demands: Standing/Walking long periods of time. Candidate will need to be able to stand/walk for extended periods of time up to 6+ hours at a time., • Travel Requirements: None NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law. It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status prior to employment. Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a management position This is a full time position Pay Range:

$5,000 Sign on Bonus! Clean Harbors Syracuse, NY is looking for a Diesel Vehicle Mechanic to join their safety conscious team! This position will be responsible for the repairs and preventative maintenance of all company owned fleet. Why work for Clean Harbors? • Health and Safety is our #1 priority and we live it 3-6-5!, • Competitive wages; $28-$38 an hour based on experience, • Opportunity for increase after 90 days!!!, • Comprehensive health benefits coverage after 30 days of full-time employment, • Group 401K/RRSP with company matching component, • Opportunities for growth and development for all the stages of your career, • Access to company paid OEM certifications and trainings!, • Generous paid time off!, • Company paid training!, • Tuition reimbursement!, • Company provided uniforms and PPE!, • State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! RESPONSIBILITIES • Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;, • Move company equipment safely on yard as needed;, • Assist drivers with addressing outstanding vehicle issues;, • Perform preventative maintenance tasks and inspections on company vehicles and equipment;, • Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment, vehicles, and machinery;, • Complete daily checklist as required, • Assure that Equipment is properly parked/secured in compliance with facility permit and DOT requirements., • Maintain facility via housekeeping duties, • Performs other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business. QUALIFICATIONS What does it take to work for Clean Harbors? • High School diploma or equivalent required, • Ability to work in a team environment, • 1+ years prior experience working on heavy duty-trucks and equipment., • 1+ years DOT inspection experience required., • Must provide own basic tools, • Related mechanical certifications preferred (not required), • Ability to pass a background, drug, and physical test upon hire 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at _. Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact _ or 1-844-922-5547. Clean Harbors and its subsidiaries are a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *CH #LI-DP2

Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. Job: Industrial Electrician Location: 100 Southern Drive, Camillus, NY 13031 Pay: $39.30 an hour Shift: 1st Shift (6 am - 3 pm) Overtime: Must be able to work daily and or weekend overtime. Union Plant We are searching for a skilled Industrial Electrician to maintain, troubleshoot, and repair electrical and mechanical industrial equipment in our corrugated packaging plant in Camillus, NY. The successful candidate will be qualified to troubleshoot and repair both electrical and mechanical components on large scale production machinery, participate in PMs, support continuous improvement initiatives, and adhere to all safety regulations. You will provide resolutions to mechanical and electrical problems on a wide variety of paper and packaging machinery to keep our plant running at peak performance. What We Offer: • A career with a Fortune 500 company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work., • Opportunities to advance and learn alongside accomplished leaders in the Corrugated Packaging industry. If you live for machine up time come, join our best-in-class maintenance team!, • Opportunities to advance and learn alongside accomplished leaders in the Corrugated Packaging industry., • An attractive rate of pay and top tier benefits, reflecting skills, competencies and potential. The rate for this role is up to $39.30 an hour., • You will work in a collaborative work environment where safety is our priority. How You Will Impact Smurfit Westrock: • Focus on maintaining equipment in working order through preventive maintenance and troubleshooting mechanical and electrical failures in a fast-paced environment., • Enforce plant safety regulations and encourage employees to become safety conscious., • Perform scheduled preventive maintenance on electrical equipment, including motors, motor control centers (MCCs), transformers, switches, and wiring., • Diagnose, troubleshoot, and repair electrical faults in complex machinery such as corrugators, printing presses, die cutters, and material handling systems., • Troubleshoot and maintain Programmable Logic Controllers (PLCs) (e.g., Allen-Bradley, Siemens) and Human-Machine Interfaces (HMIs)., • Install, maintain, and calibrate various sensors, transducers, and measuring instruments., • Ensure all electrical installations and repairs comply with the National Electrical Code (NEC), local codes, and company standards., • Strictly adhere to Lockout/Tagout (LOTO) procedures and other plant safety policies., • Maintain and repair high-voltage equipment and control systems., • Keep accurate records of all maintenance work performed, parts used, and system documentation., • Assist with the installation and commissioning of new production equipment and control systems., • Collaborate with mechanical, hydraulic, and pneumatic technicians to resolve complex operational issues., • Participate in root cause analysis of failures to implement corrective actions and improve machine reliability., • Provide support for mechanical maintenance tasks as needed to ensure production uptime including predictive and preventative maintenance. What You Need to Succeed: • High School Diploma or equivalent required; college degree or technical certification is a plus., • Minimum of 3-5 years of experience as an Industrial Electrician, preferably in a manufacturing environment (corrugated, paper, or heavy industry experience is a significant plus)., • Proven experience working with 480V three-phase systems and various control voltages., • Proficiency with electrical test equipment (e.g., multimeters, ammeters, megohmmeters)., • Expert knowledge of electrical schematics, blueprints, and wiring diagrams., • Strong aptitude for troubleshooting and programming PLCs and Variable Frequency Drives (VFDs)., • Valid Electrical license or the equivalent certification is highly valued. You must have equivalent experience to be considered for the role., • Willingness to work on both mechanical and electrical projects., • Excellent safety awareness and a commitment to safe work practices., • Strong mechanical aptitude and problem-solving skills., • Ability to work independently, manage time effectively, and handle emergency repairs under pressure., • Excellent communication skills Physical Requirements: • Ability to stand, walk, climb, and lift up to 50 lbs. regularly., • Ability to work in a loud, fast-paced industrial environment, which may include exposure to heat, dust, and chemicals., • This role is primarily off shift; however the successful candidate must be willing to work shifts, weekends, and on-call as required to support operations. The starting rate is $39.30 per hour, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 40 hours of paid vacation will be granted after 60 working day, and 10 days of paid holidays after 30 days, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at [1] _ #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Job Description Are you a skilled mechanic or technician looking to take your career to the next level? Kinsley Power Systems is hiring Field Service Technicians to service stand-by generators throughout the Northeast. If you have experience with engines, electrical systems, or heavy equipment—especially in automotive, trucking, marine, or construction—you may already have what it takes to thrive in this role. We offer specialized training to help you transition into the power generation industry and build a long-term, rewarding career. Kinsley Power Systems, a family-owned business, has been a trusted leader in generator service, sales, and rentals for over 60 years. We’re committed to exceeding customer expectations in a workplace that’s both enjoyable and supportive—where your hard work is recognized and your growth is prioritized. Key Responsibilities and Preferred Experience: • Performing preventative maintenance and repairs on standby generator systems (Ranging from 8kW-1mW), • Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators, • Preparing accurate quotes for repairs and completing/submitting work orders, • Previous experience working on residential or industrial generators, • Exceptional communication and customer service skills, • The ability to participate in an on call, rotating schedule, • Must provide your own tools (multi-meter, hand-tools, etc.), • Very safety focused with an OSHA 10 (or the ability to attain one), • Valid DOT Card (or the ability to attain one) and a valid driver’s license Benefits: • Competitive pay and PTO to keep your work-life balance in check, • Full health benefits package (Medical, Dental, Vision, etc.) + 401(k) with match, • Company-paid certifications and specialized training to grow your skills, • Company vehicle and gas card so you’re always ready to roll, • Uniforms provided, plus annual boot and uniform stipends, • Real advancement opportunities—grow your career with a team that wants to see you succeed, • A chance to work alongside some of the best technicians in the industry in a company that feels like family All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. The anticipated compensation range for this position is $22.00 to $45.00 hourly. Actual compensation may vary based on skills, experience, certifications, location, and other business-related factors. Kinsley Group offers a comprehensive benefits package that may include medical, dental, and vision insurance, company-paid life insurance, disability coverage, paid time off, paid holidays, 401(k) with company match, employee assistance programs, and other company-sponsored benefits. Compensation details: 22-45 Hourly Wage PI3d1c73608d61-25405-40610619

⚡ Join Our Growing Team as a Maintenance Mechanic at Consolidated Precision Products & Superior Metals Manufacturing!⚡ $1,000 Sign-On-Bonus + 5% Quarterly Bonus If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components. Performs all required duties relating to installing and troubleshooting plant production equipment. Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25.00 - $40.00 per hour. Shift differentials for 2nd & 3rd shift. We also have overtime available., • Shifts: We currently have 2nd & 3rd shift available., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENT What you'll be doing: • Responsible for ordering and maintaining supplies to support all maintenance functions., • Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc., • Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Dismantles defective machines and equipment and installs new or repaired parts., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replace Design, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment., • Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers., • Perform preventive maintenance per schedule., • Communicate with operators pre- and post-repair., • Repairs and maintains physical structure of establishment., • Follow lock-out/tag out procedures., • Responsible for adherence to all safety policies, practices and procedures. Requirements: • Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or related experience and/or training; or equivalent combination of education and experience., • Experienced Forklift drivers preferred., • Language skills: Ability to read, understand, and comprehend documents. Ability to speak effectively and interact with other team members, engineers, and leadership., • Mathematical Skills: Ability to add, subtract, multiply, and divide. Ability to use basic gages and measuring devices., • Reasoning Ability: Ability to deal with problems involving several concrete variables in standardized situations. Ability to carry out instructions in written, oral, and diagram form., • The ability to be reliable, work overtime as needed, and be committed to working at our Chittenango, NY facility. Working Conditions: • Frequently work near moving mechanical parts., • The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling., • Manufacturing requires repetitive motion of hands, wrists, and arms. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. More information about our company can be found at: _ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. This is a non-management position This is a full time position Pay Range: $25-$40

Consolidated Precision Products is currently looking for a 1st Shift Instrumentation Technician to join our team! $1,000 Sign-On-Bonus + 5% Quarterly Bonus If you’re looking to join a company positioned for strong growth - with real opportunities to advance - Consolidated Precision Products may be the place for you. We’re proud to offer a competitive compensation package, outstanding benefits, and the chance to work in a state-of-the-art facility alongside a skilled and collaborative team. Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: Pay starting at $26.47 with potential to make more based on your experience, education, and shift. We also have available overtime., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! Position Overview The Instrumentation Technician is responsible for the testing, calibration, installation, repair, and inspection of manufacturing control and monitoring devices. This role supports continuous improvement by ensuring accurate measurement systems and reliable instrumentation across operations. Essential Job Functions • Calibrate all equipment under the responsibility of the Instrumentation Department, maintaining calibration schedules and accurate records in accordance with company procedures, • Coordinate and oversee outside calibration vendors, including purchase order accuracy, customer requirement flow-down, and verification of completed work, • Perform periodic calibration of secondary standards traceable to NIST, documenting results per company standards, • Interpret and analyze instrumentation abnormalities, correct deviations, and perform necessary repairs, • Support Maintenance with troubleshooting of complex electrical systems, motor drives, hydraulic controls, rectifiers, power supplies, and water-cooling systems, • Maintain leak detectors and assist with leak checking when Production or Maintenance requires support, • Install new instrumentation or modify existing equipment as directed by Facilities Engineering and/or Maintenance, • Layout and construct electronic circuits using schematics, making modifications as needed to ensure proper functionality, • Troubleshoot electronic, pneumatic, and hydraulic equipment, • Maintain working knowledge of computers and programmable logic controllers (PLCs), including loading and verifying programs, • Train and assist employees on the use and operation of new instruments and control equipment, • Perform additional duties as assigned by supervision Education/Experience • Associate Degree (A.A.) from a two-year college or technical school OR, • One year of related experience and/or training in a manufacturing environment OR, • Equivalent combination of education and experience, • Experience in manufacturing, foundry, metal casting, and/or vacuum processing environments is a huge plus Skills & Abilities • Strong mechanical aptitude and ability to read blueprints, • Solid foundation in mathematics and measurement concepts, • Strong problem-solving, analytical, and critical thinking skills, • Proficiency with computers and software (GagePack, Microsoft Office, maintenance systems), • Clear written and verbal communication skills, • Sound judgment and decision-making ability If you're ready to be part of a forward-thinking team and grow with us, we’d love to hear from you! Apply today and take the next step in your career with Consolidated Precision Products. About Us: Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: _ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. This is a non-management position This is a full time position Pay Range:

⚡ Join Our Growing Team as an Industrial Electrician at Consolidated Precision Products & Superior Metals Manufacturing!⚡ $1,000 Sign-On-Bonus + 5% Quarterly Bonus Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $30 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • Shift: We currently have 8hr 2nd & 3rd shifts available. $2/hr shift differential for 2nd shift and a $3/hr shift for 3rd shift., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Adhere to all safety policies, practices, and procedures—because your safety matters! Qualifications: • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Certifications/Licenses: A valid Forklift License is preferred, but not required. Required Knowledge, Skills & Abilities: • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Computer Skills: Familiarity with maintenance work order systems, PM software, and Microsoft Office. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: _ CPP & SMM are a Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP & SMM as suppliers of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP &SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position Pay Range:

We are looking to add to our team! Now hiring a Weekend Shift TIG Welder If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a full time Welder for our facility on Weekend shift (Friday-Sunday 6am-6pm) to join our team! $1,000 sign-on bonus for eligible candidates, 5% Bonus program. Hourly rate $27-$30 per hour depending on experience. Primary Purpose Perform all required duties relating to Gas Tungsten Arc welding (GTAW) of investment castings. CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENT Major Responsibilities • Ability to weld by method of GTAW for rework, repair and cosmetic upgrade in accordance with customer specifications and internal procedures. Candidate is progressing towards welding certification for all alloys., • Evaluate castings to ensure preparation from prior operation is adequate., • Assess the condition of the castings to determine weld technique., • Perform additional weld preparation with the use of die and belt grinders., • Operate and maintain welding machines and equipment., • Ability to document weld locations and dimensions., • Identify and implement improvement opportunities through the use of lean tools such as Systematic Problem Solving, Process Management, Value Stream Mapping, etc., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work overtime, • Attendance/Reliability, • Ability to work at the Chittenango facility Minimum Qualifications and Experience • Education: High School Diploma or General Education Degree (GED), • Experience: Formal training or classes a plus., • Certifications/Licenses: Maintain welding certification for GTAW, • Other Required Knowledge, Skills & Abilities: LANGUAGE SKILLS - Ability to read, understand and comprehend documents such as safety rules, operating and maintenance instructions, simple drawings, procedure manuals and Internal Method Sheets (IMS). Ability to speak effectively and interact with other team members, engineers and leadership. MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to deal with problems involving several concrete variables in standardized situations. REASONING ABILITY - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Must be able to lift up to 50 lbs with or without reasonable accommodations., • Some positions require vision screening with or without corrective lenses. Working Conditions • The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling., • Welding requires repetitive motion of hands, wrists, and arms. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: _ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management position This is a full time position Pay Range: 27-30

Start Your Career in Aerospace Manufacturing! We are looking for a 1st Shift Shipping Clerk to join our team! Rate of Pay: $20.14/hr- Up to $40 an hour paid for applicants with previous manufacturing experience If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components. Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: Positions starting at $20.14 per hour, with potential to make more based on your role, shift, and experience., • Shifts: We currently have 8hr shifts available for on 1st shift,, • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! Job Summary: Perform all required duties relating to receiving, storing, and distributing material, tools, equipment, and products within the establishment. Essential Job Functions: • Responsible for packaging orders in accordance with customer specifications., • Responsible for maintaining lot integrity and piece counts., • Ability to coordinate and communicate shipping through various vendors including customer shipments, Outside Service Processing including but not limited to HIP, Machining and other shipping activities as needed., • May be required to perform the functions of a heat treat clerk., • Identify and implement improvement opportunities through the use of tools such as Systematic Problem Solving, Process Management, Value Stream Mapping, etc., • Responsible for adherence to all safety polices, practices and procedures., • Ability to work overtime, • Attendance/Reliability, • Ability to work at the Chittenango facility Qualifications: • Education: High school diploma or GED., • Experience: No prior experience required as we provide training, but prior manufacturing or mechanical experience is a plus!, • Computer skills: Basic computer skills are needed, • Certifications/Licenses: Pallet Jack certification, • Language skills: Ability to read, understand and comprehend documents such as safety rules, operating and maintenance instructions, procedure manuals, workstation documents and Internal Method Sheets (IMS). Ability to speak effectively (professionally) and interact with other team members, engineers and leadership., • Mathematical Skills: - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.., • Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • The ability to be reliable, work overtime as needed, and be committed to working at our Chittenango, NY facility. Working Conditions: • Frequently work near moving mechanical parts., • Occasionally exposed to outside weather, • The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling., • Manufacturing requires repetitive motion of hands, wrists, and arms. CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENT Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: _ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. Now Hiring a Shipping Clerk- 1st Shift This is a full time position Pay Range: $20.14 - $40.00 per hour

CenTrio is seeking a qualified Instrumentation & Controls Technician to join our team in Syracuse, NY! Location- Syracuse, NY Full-Time Permanent Onsite Job Summary Under the direction of the Electrical and Controls Manager, this position will be responsible for installing, calibrating, repairing, and maintaining Customer steam and chilled water metering stations as well as instrumentation and control systems in the boiler houses and chilled water plant. Diagnose and troubleshoot issues with measuring, recording and control devices in a timely manner. Coordinate and communicate with plant operators and customers when servicing or calibrating metering and control equipment. Must also be able to program, troubleshoot, and maintain loop controllers, PLCs, and other types of logic controllers. The successful candidate will be a self-starter that enjoys working in a fast-paced environment, strong commitment to deadlines and team, is process oriented with a high sense of ownership in their work, possesses a high degree of intellectual curiosity, and has a superior controls and instrumentation foundation. Core Responsibilities • Install, calibrate, troubleshoot, and program field control devices including control valves, pneumatic damper drives, motor control circuits, VFDs, PLCs, and process control systems, • Develop calibration procedures and perform calibrations of process measurement and control system nodes., • Maintain and expand new control loops including associated panels., • Commission and integrate new systems within the facility., • Work with a preventive maintenance program., • Support and maintain established system standards and documentation for process control loops and analytical equipment., • Maintain calibration records and documentation, • Read complex schematics, wiring diagrams and shop drawings for the purpose of installation, troubleshooting, and repairing of major systems and minor subsystems and components, • Utilizes a wide range of test equipment, including recorders, computers, PC based software analyzer programs, oscilloscopes, data analyzers, analog and digital multi-meters, and other test equipment, while performing tests to identify problems and to maintain and calibrate equipment to performance standards, • Connects, disconnects, and tags out equipment and circuits for test or repair and safety of personnel and equipment, • Performs soldering on electronic components., • Maintains shop and storage areas in a neat and orderly fashion., • Maintains the safe and efficient use of materials, tools, test equipment and personal safety and all others working in the vicinity., • Cleans work area after work is complete., • Complies with plant policy and procedures, particularly those involving personnel and equipment safety., • Maintains and repairs network communications systems (i.e., fiber networks, Ethernet networks and network peripherals), • Maintains and repairs complete process systems and repair/replace subcomponents as required., • Maintains telephone and/or radio contact with operation and management personnel, • Maintains regular and punctual attendance, • Other duties as assigned Working Style to Be Successful in This Role: • Effectively communicate and work collaboratively at all levels of the organization in diverse work group settings and in concert with external resources., • Effectively use a variety of media (i.e., MS office suite, etc.) to convey technical data, concepts and ideas. Technical Skills & Requirements: • Strong knowledge of PLC/HMI/SCADA/DCS hardware and software., • Strong knowledge of various instrumentation, including flow, temperature, pressure, and valves., • Must have experience with development and integration of various communication protocols such as CIP, Modbus RTU and Modbus TCP/IP., • Be able to read and understand P&ID and PFD diagrams., • Must be proficient in the use of Microsoft Office Suite including Word, Excel, and Outlook., • Will work closely with the operations and maintenance lead personnel along with the Plant management., • Highly analytical with great attention to detail., • Demonstrated strong communication skills., • Exemplifies the right motivation by aspiring to achieve collective goals., • Collaborative and interpersonal skills., • A process-focused individual with a passion to drive and deliver effective change., • Self-motivated and proactive, with respect to both managing workload and professional development., • Ability to work in a dynamic, complex, fast-paced environment, to adapt quickly and to manage changing priorities. Professional Experience & Knowledge: • Associates Degree or vocational/ technical trade school in an electrical or electronic discipline or equivalent experience, • 1-3 years of previous work experience in a manufacturing or industrial process plant environment is strongly preferred Physical Requirements: • Frequent movement throughout plant areas (including mechanical rooms and platforms), • Must be proficient with all types of hand tools and power tools both electric and pneumatic., • Must be able to work with all types of PPE including (but not limited to); dust mask, half-face respirator, all manner of hand protection, eye protection and hearing protection., • Must be able to perform the following work in a safe manner; overhead, climb ladders, squat, bend, lift 100 lbs, perform in a confined space, dusty and noisy environment, work outdoors, plenum spaces, hot and cold environments., • Must be willing to work holidays, weekends and over-time., • Must be willing to work during all types of weather events including hurricanes and storms. Who is CenTrio? CenTrio is a fully integrated, innovative and sustainable energy services provider to a wide range of industries such as higher education & healthcare campuses, cities, and communities. It serves more with utility infrastructures serving more than 170+ million square feet of space and operations in 10 cities across the United States and growing. In each community, the company operates highly efficient and innovative utility infrastructures that produce and distribute electricity, steam, hot water and/or chilled water to customer buildings and campuses. Customers connected to these systems enjoy multiple benefits including reduced operating costs, lower emissions and unmatched reliability. CenTrio is a wholly owned subsidiary of a global Infrastructure Investment Consortium with unmatched financial wherewithal and manages a portfolio of long-life, high quality infrastructure assets with high barriers to entry that generate stable and growing cash flows. Why Join CenTrio? CenTrio offers a dynamic and friendly work environment, dedicated to nurturing a top-notch team culture! Additionally, CenTrio offers an array of fabulous benefits and perks. • Medical Benefits first day of hire, • Medical, dental, vision, Life & AD&D benefits, • Option of supplemental Life & AD&D benefits, • Company paid High Deductible Healthcare Benefit Plan, • 401k plan with % match, • Training Opportunities and career progression, • Competitive salaries that reflect the value of skills and experience, • Dynamic and friendly work environment in a rapidly expanding industry with a national presence, • Remote, Hybrid, and In Office schedules available dependent on job responsibilities, • 24-hour Employee Assistance Program/Hotline, • Corporate discounts (Travel, Entertainment, Home, Auto, Apparel, Health and Wellbeing, and other various retail options)

TERRITORY SALES MANAGER Outside Sales | John Deere Construction & Forestry Equipment 📍 Location: Syracuse, NY 💼 Job Type: Full Time | Salaried-Exempt | Monday–Friday 💲 Compensation: $40k Annual Base + Commission (high earning potential = $100k+) 💰 Compensation & Perks • Competitive Pay, • Generous Paid Time Off + 7 Paid Holidays, • Paid Training & Recognition Programs, • 401(k) with Company Match, • Comprehensive Health & Wellness Benefits, • Branded Apparel, • Fantastic Work-Life Balance, • Supportive, Friendly Team Environment Own Your Territory. Build Relationships. Earn Big. Are you a driven, relationship-focused sales professional ready to take full ownership of a high-impact territory? Do you thrive in consultative, big-ticket sales and want to represent one of the most trusted brands in the world? Five Star Equipment is hiring a Territory Sales Manager for the Williamsport market, responsible for growing sales, rentals, and long-term customer partnerships across the region. This is a high-visibility role with strong earning potential, autonomy, and the backing of an industry-leading John Deere dealership. Why Syracuse? Syracuse offers an attractive place to live due to its highly affordable cost of living (roughly 28% lower than the state average), a recovering job market with growing tech and healthcare sectors, and a high quality of life featuring 4-season outdoor recreation. It is known for its friendly community and extensive park systems. 📌About Five Star Equipment Five Star Equipment is the John Deere Construction & Forestry Dealer for Northern Pennsylvania and New York State, operating 7 locations across 57 counties. We provide premium equipment, parts, and service solutions backed by knowledgeable professionals who are committed to customer success. Locations include: • Pennsylvania: Williamsport, Dunmore, Waterford, • New York: Kirkwood, Rochester, Syracuse, Orchard Park ✅ What You’ll Do As a Territory Sales Manager, you are the face of Five Star Equipment in your region. You will: • Serve as the primary point of contact for assigned customers, • Build strong, long-term relationships through regular on-site visits, • Sell new & used John Deere equipment, rentals, parts, and service solutions, • Provide consultative recommendations based on customer applications and needs, • Demonstrate equipment and support technical presentations, • Grow market share and meet or exceed sales, revenue, and gross margin targets, • Promote allied services such as preventative maintenance and repair programs, • Manage leads, call activity, and pipeline through the company CRM, • Monitor competitor activity and market trends, • Represent the company with professionalism, integrity, and enthusiasm ✅ What We’re Looking For • 3–5 years of successful outside sales experience (preferred), • 3–5 years in construction, industrial, or heavy equipment sales or rental (preferred), • Proven ability to grow sales, market share, and customer relationships, • Strong communication, negotiation, and consultative selling skills, • Comfortable operating and demonstrating heavy equipment, • Proficient with CRM systems, Microsoft Office, and digital tools, • Ability to travel within the territory and work flexible hours, • Valid driver’s license with a clean driving record Ready to Take the Lead? If you’re motivated by results, energized by customer relationships, and ready to build a lucrative career representing John Deere and Five Star Equipment, we want to hear from you. Apply today and take ownership of your territory in Williamsport. Grow Your Career with Five Star Equipment If you are a motivated, customer-focused professional ready to make an impact, this is your chance to represent one of the most trusted brands in the industry—John Deere. 📩 Apply today and join a winning team where your success is unlimited. Go to https://fivestarequipment.com/careers/

Controls Engineer (90-120K) Sapphire Recruitment is partnering with a fast-growing, innovative manufacturer in CNY to hire a Controls Engineer. This direct hire opportunity will focus on the design, programming, development, and implementation of custom automated manufacturing, assembly, and test equipment. Highlights: • Hybrid Schedule: 3 days onsite, 2 days remote., • State-of-the-art manufacturing and automation facility., • Growing automation business with continued investment and expansion., • Attractive benefits including medical, dental, PTO, 401(k) match, and tuition reimbursement., • Minimal travel (less than 5%). Job Duties: Electrical Controls Design • Design electrical control systems, panels, schematics, wiring layouts, and BOMs for custom automation equipment., • Develop electrical specifications and support control panel assembly and design improvements. PLC, HMI & Robotics Programming • Develop, modify, and troubleshoot PLC and HMI programs for automated assembly and test equipment., • Program industrial robots and electric actuators to support new equipment designs., • Maintain software documentation, change logs, and programming standards. Equipment Development & Commissioning • Support equipment builds, installation, testing, startup, and commissioning., • Troubleshoot electrical, mechanical, wiring, and programming issues during equipment development., • Participate in equipment design reviews, validation, and transfer to production. Production Support & Continuous Improvement • Troubleshoot and improve existing automated manufacturing equipment., • Implement engineering changes and identify opportunities to improve equipment reliability and performance., • Collaborate with Mechanical Engineering, Manufacturing, and Maintenance teams on technical improvements., • Develop equipment documentation, troubleshooting procedures, and maintenance training materials. Education & Experience: • AAS or BS in Engineering or related technical field; BS preferred., • 2+ years of controls/automation experience, including relevant coursework., • Knowledge of PLC programming, ladder logic, and HMI systems., • Ability to read/create electrical schematics and troubleshoot complex industrial equipment., • Industrial robotics and automated assembly/test equipment experience preferred., • Familiarity with NEC, NFPA, and IEC electrical standards is a plus. For immediate and confidential consideration, submit your resume to: techjobs@hiresapphire.com Sapphire Recruitment is an EOE

Job DescriptionDescription: Perform various types of maintenance operations including preventative maintenance & repairs. MONDAY-FRIDAY 6pm-2:30pm OR MONDAY-THURSDAY 1pm-11:30pm Shifts Available ABOUT JAQUITH INDUSTRIES: Jaquith Industries is a family-owned manufacturing company committed to delivering high-quality products, exceptional customer service, and a safe, team-oriented work environment. We take pride in our craftsmanship, reliability, and the long-term relationships we build with our employees and customers. At Jaquith Industries, we believe our people are our greatest asset, and we are dedicated to providing opportunities for growth, stability, and success. We are looking for motivated individuals who value teamwork, dependability, and continuous improvement. If you're seeking a rewarding career with a company that values its employees and invests in their future, we'd love to hear from you. BENEFITS: Jaquith Industries offers a competitive benefits package, including: · Health Insurance - 75% Employer Covered · Life Insurance · 401(k) Retirement Plan · 401(k) Automatic 3% Match · 80 Hours of Paid Time Off (PTO) · 40 Hours of Paid Sick Time · 11 Paid Holidays per Year · Up to $700 Annual Reimbursement for Eligible Dental and Vision Expenses · Stable, Long-Term Employment Opportunities · Overtime is Available, but Not Required · Supportive Team Environment Join a company where your hard work is valued and your contributions make a difference every day Key Responsibilities: • Independently troubleshoot and repair manufacturing equipment, including CNC machinery, laser cutting equipment, welding equipment, and automated systems, within the employee’s training and qualifications., • Maintain and repair mechanical, pneumatic, and hydraulic systems, including bearings, drives, gearboxes, pumps, valves, and cylinders. Perform precision alignment, adjustments, and component replacement., • Troubleshoot industrial electrical components and basic controls using schematics, equipment diagnostics, and PLC input/output information within the employee’s training and authorization. Coordinate advanced repairs with qualified personnel., • Complete preventive maintenance and investigate recurring failures to recommend improvements that reduce downtime., • Assist with equipment installations, relocations, rebuilds, and modifications, including disassembly, inspection, reassembly, and startup testing., • Maintain facility systems and supporting equipment, including compressed air, ventilation, and fume collection systems, and perform routine building repairs., • Document maintenance work, identify repair and spare-part needs, and coordinate priorities and equipment status with maintenance leadership and production personnel., • Follow established safety procedures, including lockout/tagout, verify equipment operation before returning it to production, and provide guidance to Maintenance Technician I employees as assigned. Skills and Qualifications: • Three or more years of industrial maintenance experience preferred; equivalent combinations of training and demonstrated ability will be considered., • Strong mechanical troubleshooting skills and practical knowledge of pneumatic, hydraulic, and basic industrial electrical and control systems., • Ability to independently diagnose and complete routine and moderately complex repairs, interpret manuals and schematics, and use hand tools, precision measuring instruments, and diagnostic equipment., • Experience with CNC machinery, laser cutting equipment, welding equipment, or automated manufacturing systems preferred., • Strong problem-solving, organization, and communication skills, with the ability to maintain accurate records and work safely independently or as part of a team., • High school diploma or equivalent; technical training, apprenticeship experience, or related certifications preferred., • Ability to perform essential physical duties, including lifting, bending, climbing, and prolonged standing, with or without reasonable accommodation. We value a safety-conscious culture and offer opportunities for growth and development within our organization. Join us and be part of a team dedicated to maintaining high standards of quality and operational excellence. Requirements: · High school diploma or general education degree (GED) or 3 years work experience. · Practice good oral and written communication skills. · Participate in training events (ie; Lockout/Tagout; HazCom; and overhead crane training) · Treat all co-workers with dignity and respect. · Possess basic math skills. · Possess basic organizational skills. · Maintain positive attitude towards work and work environment.

Job DescriptionShape the backbone of a high-growth cultivation operation At NYCANNA, LLC, DBA THE BOTANIST—part of Canopy USA, LLC—you’ll help keep our Syracuse cultivation facility running smoothly. Canopy USA unites well-known cannabis brands and operators—Wana, Jetty, and Acreage—unlocking efficiencies across key categories like flower (Superflux), vapes and concentrates (Jetty), edibles and beverages (Wana), and retail (The Botanist). With a growing presence across Midwestern and Northeastern markets, we’re building an agile organization poised for scale. A day in the life As our Facilities Technician, you’ll be the on-the-ground problem-solver who keeps systems humming and spaces spotless. You’ll start your day with a walkthrough of critical areas, tackle high-priority maintenance tickets, and collaborate closely with the Facilities Manager, vendors, and contractors to deliver safe, timely repairs. • Own daily sanitation across restrooms, hallways, break spaces, and exterior areas., • Restock PPE, trash receptacles, and restroom supplies throughout the building., • Complete minor building and equipment repairs (grow lights, fans, HVAC, plumbing, electrical, and more)., • Support major repairs under the Facilities Manager, coordinating with licensed trades as needed—including emergency fixes., • Install and commission new equipment (e.g., racks, dehumidifiers) safely and efficiently., • Troubleshoot issues across electrical, structural, plumbing, and facility equipment., • Follow preventive maintenance schedules and close work orders on time., • When work requires outside expertise, schedule contractors—and learn from them to reduce future outsourcing., • Pitch in as needed: light custodial tasks (yes, even shoveling snow) and washing/sorting employee uniforms daily to ensure clean gear for every shift.Administrative excellence, • Maintain accurate logs for repairs, cleaning, maintenance, and calibrations., • Immediately elevate system failures or damage to the Facilities Manager., • Complete daily/weekly/monthly equipment checklists and follow facility SOPs., • Champion safety and biosafety programs, regulatory compliance, and a spotless production floor.What you bring, • High school diploma or equivalent required; Bachelor’s degree preferred., • 2+ years in building/mechanical maintenance preferred., • Hands-on knowledge across trades: plumbing, electrical, carpentry, drywall, tile, and general repairs—or equivalent training/experience., • Experience in cannabis or another highly regulated industry strongly preferred., • Proven flexibility and willingness to take on new projects.Core skills, • Solid math for measurements, inventories, and projections., • Comfort with industrial cleaning tools and equipment upkeep., • Strong time management and prioritization; calm under pressure., • High integrity and discretion; detail-focused and dependable., • Clear, calm communicator and reliable teammate., • Computer literacy plus mechanical aptitude.Schedule Monday–Friday, 8:30 a.m.–5:00 p.m. ET (subject to change based on business needs). Perks and benefits • Medical, dental, and vision insurance, • Paid parental leave, • 401(k), • Paid Time Off and holidays, • Short- and Long-Term Disability, • Employee Assistance Program, • Employee life and supplemental life insurance, • Spouse/child life and AD&D, • Pet insurance, • FSA and HSA options *Based on eligibility. Work environment and physical demands The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be requested to enable individuals with disabilities to perform the essential functions. • Manufacturing setting; extended standing, walking, bending, and reaching., • Lift/carry up to 50 lbs for up to 100 ft., • Frequent, repetitive use of arms, hands, and fingers to handle small components., • Close visual focus and ability to work in a humid, pollinated environment., • Wear company-provided lab coats, hair/beard nets, gloves, surgical masks, and eye/face protection while in the lab., • Follow Syracuse facility hygiene standards.How we work People first, always. We foster learning, growth, innovation—and we expect every team member to model our values and uphold our Code of Conduct. Legal notices E-Verify Participation Notice This Employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. What is E-Verify? E-Verify is an internet-based system that compares information from and employee’s Form I-9, Employment Eligibility Verification, to data from the U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. NYCANNA, LLC, DBA THE BOTANIST is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, disability, or protected Veteran status. We appreciate your interest in NYCANNA, LLC, DBA THE BOTANIST. If you need assistance with completing an online application due to a disability, please send a request to HRTeam@acreageholdings.com. Please be sure to include “Accommodation Request” in the subject line.

Job DescriptionMaintenance Mechanic Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Hourly Range - $31.00- $43.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment, • Educational Support via tuition reimbursement and scholarship program Work Shift and Location D1 – 6am-630pm 6450 Benedict Rd W East, NY 13057 Job Overview The Maintenance Mechanic plays a key role in executing assigned maintenance tasks. This includes performing full-break downs and rebuilds of production equipment as well as performing preventative maintenance on all production equipment. Key Responsibilities • Perform preventive and corrective maintenance on dairy processing equipment including pasteurizers, homogenizers, separators, pumps, conveyors, and packaging machinery to minimize downtime and ensure continuous production operations., • Diagnose and repair mechanical, electrical, hydraulic, and pneumatic systems using hand tools, power tools, and diagnostic equipment while following lockout/tagout procedures and safety protocols in a food-grade environment., • Troubleshoot and resolve equipment malfunctions quickly to restore production lines, working with programmable logic controllers (PLCs), motor controls, and automated systems common in dairy processing facilities., • Install, calibrate, and maintain instrumentation and control systems including temperature sensors, pressure gauges, flow meters, and automated valves to ensure accurate monitoring of critical processing parameters., • Conduct routine inspections of facility infrastructure including steam systems, compressed air lines, refrigeration equipment, and water treatment systems, identifying potential issues after they impact production., • Maintain detailed maintenance records, work orders, and equipment histories in computerized maintenance management systems (CMMS) while coordinating with production teams to schedule repairs during planned downtime and minimize disruption to operations. Min. Qualifications • GED or High School diploma is preferred., • Minimum 2-3 years’ experience within the mechanical field., • Proficiency with VFDs, stretch/blow molding equipment, conveyors, pumps, pneumatic sanitary valves, and pneumatic/hydraulic systems, along with programmable logic controllers and instrumentation/controls., • Experience maintaining closed cooling systems including evaporator towers, water cooling towers, and industrial chillers used in manufacturing operations., • Food manufacturing environment experience preferred, with HVAC experience considered an additional asset for maintaining sanitary processing conditions. Byrne Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development

Job DescriptionDescription: Altitude Access Solutions Inc., the new operator of the Syracuse Hancock International Airport parking operation is growing and seeking dedicated, hardworking individuals to join our team. As our operations expand, we have multiple new positions available. We are looking for part-time Maintenance Workers who take pride in their work, value excellent customer service, and enjoy contributing to a positive, reliable, and safety-focused environment. The Maintenance Worker is responsible for maintaining the deadlines, safety, and operational standards of the parking facilities at Syracuse Hancock International Airport including facility upkeep, minor repairs, parking equipment maintenance and troubleshooting, and providing excellent customer service. Essential Functions/Duties/Responsibilities: • Perform routine maintenance and cleaning tasks as outlined in checklists or directed by the Facility Manager/Supervisor, ensuring all areas of the facility are free of dirt, dust, litter, and debris using appropriate tools and equipment, • Conduct daily walkthroughs of the garage to identify and address maintenance issues promptly, • Maintain cleanliness of entrances, exits, stairwells, surface rails, booths, offices, and restrooms; empty trash receptacles throughout the facility, • Paint designated areas (e.g., poles, signs, doors, walls, curbs, islands, gates) to maintain a neat and professional appearance, • Replace burned-out light bulbs and apply oil absorbent to spills, as needed, • Submit repair and maintenance requests, • Monitor safety items such as gate arms and clearance bars for proper function, • Proactively identify maintenance issues and take corrective action without waiting for direction, when appropriate, • Manage workload effectively to ensure daily and seasonal maintenance tasks are completed on schedule with minimal supervision, • Maintenance staff may be cross-trained to assist with shuttle operations as needed., • Inspect ticket spitters and gates daily for operational accuracy, ticket supply, and general appearance., • Maintain inventory of janitorial supplies and update garage/lot sweep sheets regularly., • Operate equipment such as automatic sweepers, scrubbers, weed eaters, lawnmowers, and other tools for facility upkeep and minor repairs., • Perform seasonal tasks including snow removal using shovels, blowers, and other light-duty equipment., • May be required to complete light repairs including concrete/asphalt patching, plumbing fixes (faucets, drains, leaks), door and lock maintenance, and minor carpentry or signage installation., • Support preventative maintenance programs and respond promptly to service requests., • Safely and effectively use hand tools and small power tools for general maintenance tasks., • Report accidents, safety hazards, suspected policy violations, or unusual occurrences to the Facility Manager/Asst. Manager or Supervisor in a timely manner., • Deliver excellent customer service by assisting customers within the facility, addressing inquiries, and resolving complaints independently or with Supervisor support., • Remain familiar with all aspects of facility operations and provide coverage for other duties as needed., • Maintain an organized and tidy work area, to adhere to company safety protocols., • Perform additional tasks as assigned to support overall facility operations. Due to weather events and operational emergencies, employees may be required to work extended hours or mandatory overtime to maintain safe operations. Requirements: • Good verbal and written communication skills., • Strong active listening skills; asks for clarification when needed., • Ability to read and interpret written information., • Strong interpersonal and customer service skills., • Positive attitude and a team-player mindset., • Develop and maintain thorough knowledge of the garage layout and surrounding area, including major streets, landmarks, and freeways., • Ability to function well in a fast-paced environment. Reacts well under pressure., • Knowledge of OSHA safety practices and ability to follow established safety procedures, • Working knowledge of basic electrical, mechanical, and plumbing repair, • Experience maintaining parking facilities, equipment, or access/revenue control systems (preferred), • Ability to operate maintenance equipment (lifts, snow equipment, hand/power tools) Physical Requirements: • Ability to stand and walk for extended periods (up to 8 hours per shift)., • Frequent ability to climb, balance, stoop, kneel, crouch, twist, stretch, and bend as part of daily tasks., • Capability to lift and move objects weighing up to 75 lbs., • Occasionally required to reach with hands and arms above shoulder level, up to 75 lbs., • Comfortable working in environments with dust, chemicals, and other potential irritants., • Ability to work outdoors and in varying weather conditions, including rain, snow, heat, and cold. Education and Experience Required: • High school diploma or equivalent., • At least two to five years of related experience in general facility or commercial/industrial maintenance Special Requirements: • Valid NYS driver’s license for the class of vehicle being driven and acceptable DMV record, • Subject to drug-testing per company policy, • Ability to work second and/or third shift, as well as weekends and holidays, • Ability to report for duty during severe weather events and emergencies, including working mandatory overtime, • Maintain a clean Motor Vehicle Record (MVR) in accordance with company and Airport standards, • Possess a valid DOT Medical Examiner’s Certificate or ability to obtain and maintain one as a condition of employment, • Must successfully complete E- Verify I9 process. We will provide E-Verify and the federal government with your I-9 information to confirm that you are authorized to work in the U.S. *Any offer of employment would be contingent on passing a security clearance background check and pre-employment drug test. Preferred Qualifications • Previous experience working at an airport. Employee Benefits (eligibility dependent on employment type): • Paid time off, • Paid holidays, • Medical/Dental/Vision, • NYS Deferred Compensation Plan 457(b) with employer 401(a) match, • Paid Family Leave, • Employee Assistance Program, • Flexible Spending Accounts, • Supplemental Insurance, • Night Shift Differential. $1.00/night shift differential for the overnight shift EEO Statement: Altitude Access Solutions, Inc. is committed to equal employment opportunity and leveraging the talent of a diverse workforce to serve the traveling public at Syracuse Hancock International Airport. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran, or any other basis protected by Federal, State or Local law. We encourage individuals from all backgrounds to apply.

Job Description We are looking for a Maintenance Technician I to join our facilities and manufacturing team at Bluefors in Syracuse, NY. In this entry-level role, you will help maintain production equipment, support preventative maintenance activities, and contribute to keeping our manufacturing environment safe, clean, and operating efficiently. This is an excellent opportunity for someone with mechanical aptitude who enjoys hands-on work, problem-solving, and learning new technical skills in a high-tech manufacturing environment. Interested? Keep reading! Your tasks will include supporting the Maintenance team with production needs, preventative maintenance, facilities support, and special projects. You will perform hands-on tasks such as filling liquid nitrogen transfer dewars and flasks, cleaning vacuum pump traps, removing ice from nitrogen flasks, cleaning and servicing CNC coolant tanks, changing HVAC and air filters, maintaining CNC mist collectors, and assisting with cooling tower and A/C coil cleanings. You will also perform process cooling water filter changes, maintain maintenance records, monitor inventory, and coordinate planned maintenance activities with production managers to minimize disruption to manufacturing operations. Maintaining clean, safe, and organized work areas will be an important part of the role. We are looking for a candidate with a high school diploma or GED and at least six months of maintenance experience. Manufacturing experience is a plus, and strong mechanical aptitude is highly preferred. You should be comfortable reading and interpreting safety rules, operating and maintenance instructions, procedure manuals, and training documents. The ideal candidate will have technical and mechanical abilities, strong communication skills, initiative, and a results-driven approach to completing work. Knowledge of OSHA safety regulations related to machinery and manufacturing environments is a plus. We also appreciate candidates who are dependable, proactive, and willing to learn. Experience supporting preventative maintenance programs, working around manufacturing equipment, or performing basic mechanical and facilities maintenance will help you stand out. A strong commitment to safety, housekeeping, teamwork, and continuous learning is highly valued. Candidates who enjoy hands-on work and take initiative to identify and address maintenance needs will thrive in this role. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. You will have the opportunity to build your technical knowledge and gain valuable experience supporting advanced manufacturing operations. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay Range: $ 22.00-$36.00/hr. (DOE) Main Responsibilities include the following: Support Maintenance with daily production needs Fill liquid nitrogen transfer dewars Fill liquid nitrogen flasks Clean vacuum pump traps Empty ice from nitrogen flasks Support preventative maintenance activities Empty, clean, and fill CNC coolant tanks Change HVAC return air filters Assist with A/C coil cleanings Change air filtration filters Change CNC mist collector filters and clean old filters and reservoir tanks Assist with cooling tower cleanings Support Maintenance with special projects Support Facilities Maintenance during PTO coverage Maintain records relating to planned and completed maintenance Coordinate with production managers to schedule planned maintenance with minimal disruption to production Clean machines, tooling, and parts and perform maintenance as required Monitor and record inventory usage, including tooling, supplies, and raw materials Notify appropriate personnel when supplies or materials need replenishment Perform process cooling water filter changes Maintain proper housekeeping and safety practices Perform additional duties as assigned What We Expect from You High school diploma or GED required Six months of maintenance experience required Manufacturing experience preferred Strong mechanical aptitude highly preferred Technical and mechanical abilities Ability to read and interpret safety rules, operating and maintenance instructions, procedure manuals, and training documents Strong communication skills Results-driven approach to completing assigned work Demonstrated initiative and willingness to take ownership of tasks Ability to follow established safety procedures Commitment to maintaining a clean and organized work environment Ability to work effectively independently and as part of a team Willingness to continue learning and developing technical skills Excellent command of English, both written and spoken We Also Appreciate Knowledge of OSHA safety regulations applicable to manufacturing equipment Experience working in a manufacturing environment Experience with preventative maintenance Experience working with CNC equipment or related manufacturing machinery Experience with HVAC, cooling systems, filtration systems, or industrial maintenance Strong troubleshooting and problem-solving skills A proactive approach to identifying maintenance needs Strong organizational and recordkeeping skills A collaborative, team-oriented mindset Positive attitude and commitment to safety, quality, and continuous learning Physical Demands While performing the duties of this job, the employee is frequently required to stand, reach with arms and hands, and use hands and fingers for detailed maintenance tasks. The employee is occasionally required to walk, stoop, kneel, crouch, or crawl and communicate verbally. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment This position operates in a manufacturing environment and regularly works around moving mechanical parts, production equipment, machinery, tools, and maintenance systems. Employees may occasionally be exposed to humid conditions, fumes or airborne particles, heat, cold, electrical hazards, vibration, and moderately loud noise. Mandatory personal protective equipment (PPE) must be worn as required. Employees are expected to follow all Bluefors safety procedures and maintain a clean, safe, and organized workspace at all times. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job Description J&B Installations, Inc. is a commercial and industrial roofing contractor specializing in EPDM, PVC, and TPO membranes. We are family owned and operated and have been the leading commercial roofing company in New York State for over 45 years. J&B Installations is located in Skaneateles, NY with jobs located throughout the greater Central New York area. This position is responsible for installing, repairing, and maintaining the roofing systems of commercial buildings such as offices, factories, schools, hospitals and warehouses. Commercial roofers work with various types of roofing materials, including asphalt, metal, and membrane systems, and are skilled in working with both flat and sloped roofs. Essential Job Duties and Responsibilities: (Additional duties may be assigned) • Installation of single ply roof systems such as EPDM, TPO, PVC, • Installation of single ply and BUR roof system details and flashings, • Ability to interpret drawings, and follow written and verbal instructions, • Follow manufacturer specifications during installation, • Flat Insulation and Tapered insulation layout is a plus, • Load, unload, and store materials safely, • Cut and shape roofing materials to fit specified areas, • Abide by all safety protocols and regulations are followed, including proper use of harnesses, scaffolding, and other safety equipment, • Work with fall protection systems, ladders, and lifts to access high areas, • Adhere to OSHA (Occupational Safety and Health Administration) guidelines Requirements Minimum Qualifications: • 2-5 years experience in commercial roofing preferred, • Must have own transportation to and from job sites, • OSHA 10 certification. Can be acquired online, • Must have own hand tools Knowledge, Skills, and Abilities: • Ability to interpret construction blueprints, diagrams, and roofing plans., • Understanding the different types of commercial roofing systems (e.g., TPO, EPDM, PVC, built-up roofing, metal, etc.) and materials used in construction, repair, and maintenance., • Knowledge of OSHA regulations and workplace safety protocols, including fall protection, ladder safety, and equipment handling., • Understanding the proper use of roofing tools (e.g., power tools, hand tools, pneumatic guns) and equipment (e.g., scaffolding, ladders, hoists)., • Basic math skills to calculate areas and measure materials., • Ability to communicate effectively with team members and supervisors, including explaining issues and project updates., • Ability to work collaboratively with a team of other roofers and contractors to complete projects efficiently and safely., • Ability to work in physically demanding conditions, including lifting heavy materials, working at heights, and withstanding hours of outdoor work., • Ability to assess and identify risks associated with roofing work, ensuring safety and quality standards are maintained throughout the project. Benefits Why work for J&B Installations? • Family owned and operated, • Competitive starting pay rate $23.00 - $38.00, depending on experience, • Prevailing wage jobs (Rate varies based on county) $45.00 - 74.25/hr., • Comprehensive Medical Insurance, • 401k retirement plan, • Profit Sharing, • Opportunity for advancement J&B Installations is an equal opportunity employer.

Job Description U.S. Water Services Corporation is a well-established and diverse water and wastewater utility organization specializing in utility maintenance, operations, engineering and construction services. Headquartered in New Port Richey, Florida, U.S. Water is rapidly expanding with a staff of over 700 employees in 19 states. U.S. Water's Industrial Group specializes in providing wastewater facility operations & maintenance services for clients in the industrial and private sector. Job SummaryWe currently have an opportunity for an experienced Craftsman Technician. U.S. Water's Industrial Group operates treatment plants for its customers throughout the US. Each customer site is operated by an offsite project manager who works with a dedicated onsite Lead Operator and site operations team. This team is responsible for monitoring processes, adjusting controls, performing laboratory tests, maintaining equipment, replenishing chemicals, and maintaining good housekeeping. As part of the maintenance team, the Craftsman Technician completes a variety of maintenance tasks across our facilities. Primary Responsibilities • Performs scheduled routine preventative maintenance on plant equipment – pumps, blowers, motors. This includes tearing down and rebuilding equipment., • Performs non-routine system upgrades and process improvements. This includes removal of old equipment, installation of new equipment and machinery., • Experience with PVC, HDPE pipework preferred., • Demonstrates good interpersonal skills., • Applies a working knowledge of fundamental principles, terminology, and methodology in carrying out assignments., • Understands and applies standard policies and procedures within specific discipline., • Performs assignments with clear, specific objective which may require the limited exercise of judgment and decision-making skills., • Digs, spreads, and level dirt and gravel using picks, shovel and/or grading equipment., • Lifts and carries building materials, tool & supplies., • Cleans tools, equipment, materials, and work areas, • Performs a variety of tasks involving dexterous use of hands and tools, such as sawing lumber, dismantling forms, removing projections from concrete, mounting pipe hangers and cutting and attaching insulation material., • May operate a variety of the following types of equipment: jackhammer, generator, sand blaster, concrete mixer, grinders, compressors, saws, tampers, pumps etc. NOTE: This Job Description is not inclusive of all job duties. Job Requirements • High school diploma and 5+ years of relevant experience, • Valid driver's license, • Ability to travel 2-3 weeks at a time, • Experience working in an industrial setting, • Applicable Health & Safety training, • Ability to read plans / drawings / specifications and interpret data, • Knowledge of Microsoft Office, • Examples of Physical Requirements:, • Lifting: must be able to lift and carry up to 50lbs, • Standing: Position requires standing for extended periods, with occasional sitting", • Reaching/Climbing: Must be able to reach overhead and climb stairs and ladders, • Environmental Conditions: Must be able to work outdoors in various weather conditionsCompensation and Benefits Pay is commensurate with experience and reflective of market. U.S. Water offers a comprehensive benefits package including medical, dental, vision, life insurance, short/long-term disability, paid time off, holiday pay and 401(k) with company match. U.S. Water offers competitive wages and benefits and is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, national origin, age, veteran status, disability, or any other protected class. Job Posted by ApplicantPro

Job DescriptionThis position is based at our Syracuse, New York facility with core hours of 2:30pm to 10:30pm. What you’ll do: • Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations., • Need a basic understanding of PLC logic and machine programming (Mcode/Gcode), • Adjust equipment to required specification and check to assure effective operation., • Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory., • Perform electrical test operations., • Work from complex schematic diagrams, manuals and testing procedures., • Troubleshoot all defective printed circuit assembly boards., • Perform similar or associated electrical or mechanical duties as directed., • Detect and report all unusual cases to proper supervision., • Use of judgment to comply with instructions or prescribed routines and to make decisions. Qualifications:Required (Basic) Qualifications:, • Journeymen or three (3) years of documented maintenance experience in an industrial electrical/mechanical trade, • Authorized to work in the United States without Company sponsorship., • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse facility (50 miles) will be considered for this position. Preferred qualifications: • Four (4) years or more of documented maintenance experience in an industrial electrical/mechanical trade preferred, • Background in machining and electrical equipment, • Two year degree in electronics with mechanical experience/Military electronics experience., • Experience with hydraulics SKILLS AND CERTIFICATIONS [note: bold skills and certification are required] basic understanding of PLC logic and machine programming (Mcode/Gcode) Journeymen or three (3) years of documented maintenance experience in an industrial electrical/mecha

Job DescriptionMaintenance Mechanic Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Hourly Range - $31.00- $43.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment, • Educational Support via tuition reimbursement and scholarship program Work Shift and Location N2 – 6pm-630am 6450 Benedict Rd W East, NY 13057 Job Overview The Maintenance Mechanic plays a key role in executing assigned maintenance tasks. This includes performing full-break downs and rebuilds of production equipment as well as performing preventative maintenance on all production equipment. Key Responsibilities • Perform preventive and corrective maintenance on dairy processing equipment including pasteurizers, homogenizers, separators, pumps, conveyors, and packaging machinery to minimize downtime and ensure continuous production operations., • Diagnose and repair mechanical, electrical, hydraulic, and pneumatic systems using hand tools, power tools, and diagnostic equipment while following lockout/tagout procedures and safety protocols in a food-grade environment., • Troubleshoot and resolve equipment malfunctions quickly to restore production lines, working with programmable logic controllers (PLCs), motor controls, and automated systems common in dairy processing facilities., • Install, calibrate, and maintain instrumentation and control systems including temperature sensors, pressure gauges, flow meters, and automated valves to ensure accurate monitoring of critical processing parameters., • Conduct routine inspections of facility infrastructure including steam systems, compressed air lines, refrigeration equipment, and water treatment systems, identifying potential issues after they impact production., • Maintain detailed maintenance records, work orders, and equipment histories in computerized maintenance management systems (CMMS) while coordinating with production teams to schedule repairs during planned downtime and minimize disruption to operations. Min. Qualifications • GED or High School diploma is preferred., • Minimum 2-3 years’ experience within the mechanical field., • Proficiency with VFDs, stretch/blow molding equipment, conveyors, pumps, pneumatic sanitary valves, and pneumatic/hydraulic systems, along with programmable logic controllers and instrumentation/controls., • Experience maintaining closed cooling systems including evaporator towers, water cooling towers, and industrial chillers used in manufacturing operations., • Food manufacturing environment experience preferred, with HVAC experience considered an additional asset for maintaining sanitary processing conditions. Byrne Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development

Job DescriptionDescription: Altitude Access Solutions Inc., the new operator of the Syracuse Hancock International Airport parking operation is growing and seeking dedicated, hardworking individuals to join our team. As our operations expand, we have multiple new positions available. We are looking for full-time Maintenance Workers who take pride in their work, value excellent customer service, and enjoy contributing to a positive, reliable, and safety-focused environment. The Maintenance Worker is responsible for maintaining the deadlines, safety, and operational standards of the parking facilities at Syracuse Hancock International Airport including facility upkeep, minor repairs, parking equipment maintenance and troubleshooting, and providing excellent customer service. Essential Functions/Duties/Responsibilities: • Perform routine maintenance and cleaning tasks as outlined in checklists or directed by the Facility Manager/Supervisor, ensuring all areas of the facility are free of dirt, dust, litter, and debris using appropriate tools and equipment, • Conduct daily walkthroughs of the garage to identify and address maintenance issues promptly, • Maintain cleanliness of entrances, exits, stairwells, surface rails, booths, offices, and restrooms; empty trash receptacles throughout the facility, • Paint designated areas (e.g., poles, signs, doors, walls, curbs, islands, gates) to maintain a neat and professional appearance, • Replace burned-out light bulbs and apply oil absorbent to spills, as needed, • Submit repair and maintenance requests, • Monitor safety items such as gate arms and clearance bars for proper function, • Proactively identify maintenance issues and take corrective action without waiting for direction, when appropriate, • Manage workload effectively to ensure daily and seasonal maintenance tasks are completed on schedule with minimal supervision, • Maintenance staff may be cross-trained to assist with shuttle operations as needed., • Inspect ticket spitters and gates daily for operational accuracy, ticket supply, and general appearance., • Maintain inventory of janitorial supplies and update garage/lot sweep sheets regularly., • Operate equipment such as automatic sweepers, scrubbers, weed eaters, lawnmowers, and other tools for facility upkeep and minor repairs., • Perform seasonal tasks including snow removal using shovels, blowers, and other light-duty equipment., • May be required to complete light repairs including concrete/asphalt patching, plumbing fixes (faucets, drains, leaks), door and lock maintenance, and minor carpentry or signage installation., • Support preventative maintenance programs and respond promptly to service requests., • Safely and effectively use hand tools and small power tools for general maintenance tasks., • Report accidents, safety hazards, suspected policy violations, or unusual occurrences to the Facility Manager/Asst. Manager or Supervisor in a timely manner., • Deliver excellent customer service by assisting customers within the facility, addressing inquiries, and resolving complaints independently or with Supervisor support., • Remain familiar with all aspects of facility operations and provide coverage for other duties as needed., • Maintain an organized and tidy work area, to adhere to company safety protocols., • Perform additional tasks as assigned to support overall facility operations. Due to weather events and operational emergencies, employees may be required to work extended hours or mandatory overtime to maintain safe operations. Requirements: • Good verbal and written communication skills., • Strong active listening skills; asks for clarification when needed., • Ability to read and interpret written information., • Strong interpersonal and customer service skills., • Positive attitude and a team-player mindset., • Develop and maintain thorough knowledge of the garage layout and surrounding area, including major streets, landmarks, and freeways., • Ability to function well in a fast-paced environment. Reacts well under pressure., • Knowledge of OSHA safety practices and ability to follow established safety procedures, • Working knowledge of basic electrical, mechanical, and plumbing repair, • Experience maintaining parking facilities, equipment, or access/revenue control systems (preferred), • Ability to operate maintenance equipment (lifts, snow equipment, hand/power tools) Physical Requirements: • Ability to stand and walk for extended periods (up to 8 hours per shift)., • Frequent ability to climb, balance, stoop, kneel, crouch, twist, stretch, and bend as part of daily tasks., • Capability to lift and move objects weighing up to 75 lbs., • Occasionally required to reach with hands and arms above shoulder level, up to 75 lbs., • Comfortable working in environments with dust, chemicals, and other potential irritants., • Ability to work outdoors and in varying weather conditions, including rain, snow, heat, and cold. Education and Experience Required: • High school diploma or equivalent., • At least two to five years of related experience in general facility or commercial/industrial maintenance Special Requirements: • Valid NYS driver’s license for the class of vehicle being driven and acceptable DMV record, • Subject to drug-testing per company policy, • Ability to work second and/or third shift, as well as weekends and holidays, • Ability to report for duty during severe weather events and emergencies, including working mandatory overtime, • Maintain a clean Motor Vehicle Record (MVR) in accordance with company and Airport standards, • Possess a valid DOT Medical Examiner’s Certificate or ability to obtain and maintain one as a condition of employment, • Must successfully complete E- Verify I9 process. We will provide E-Verify and the federal government with your I-9 information to confirm that you are authorized to work in the U.S. *Any offer of employment would be contingent on passing a security clearance background check and pre-employment drug test. Preferred Qualifications • Previous experience working at an airport. Benefit Package Includes: • Paid time off, • Medical/Dental/Vision, • NYS Deferred Compensation Plan 457(b) with employer 401(a) match, • Paid Family Leave, • Employee Assistance Program, • Flexible Spending Accounts, • Supplemental Insurance, • Night Shift Differential. $1.00/night shift differential for the overnight shift EEO Statement: Altitude Access Solutions, Inc. is committed to equal employment opportunity and leveraging the talent of a diverse workforce to serve the traveling public at Syracuse Hancock International Airport. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran, or any other basis protected by Federal, State or Local law. We encourage individuals from all backgrounds to apply.

Job Description Commercial/Industrial - Boiler/Burner/Controls Specialist - East Syracuse, NY If you like to show off your troubleshooting skills and are a strong customer-focused Technician then we want you! Experienced C&I burner, controls, combustion technicians wanted! We're Blake Thermal Sales & Service, Inc., and we are the official representative of Cleaver Brooks, Camus, and many other C&I equipment manufacturers in the thermal energy industry. We are looking for boiler and burner technicians with a focus on advanced control systems. Don't worry if you're not a "specialist", we are interested in technicians at all levels from apprentices to senior level personnel We offer factory training and certifications, as well as on the job training. Members of our team are all thermal energy & mechanically/electrically minded, self-managed, and extremely customer-focused. OUR COMPANY: Blake Thermal Sales & Service Inc. is the manufacturer's rep for Cleaver Brooks and Camus boilers. Blake Thermal Sales & Service Inc. is a full-service thermal solutions company that supplies engineered products, services, and complete systems. Blake Thermal has a 99-year history of providing an array of products and services supporting steam, hot water for process and domestic heat for commercial, industrial, medical, educational and manufacturing facilities. Headquartered in East Windsor, CT, Blake Thermal maintains multiple locations across New York and New England including East Syracuse, NY. • Sole focus on integrating and supplying engineered products, services, and complete thermal systems, • Longstanding relationship as a manufacturer's representative with a 99-year history, • Premier product supported by factory authorized local technicians For more information about our company, please visit our website via the following link: https://www.blakethermal.com/ Ideal Candidates will be in alignment with Blake Thermal's Core Values: • Customer Focused, • Opportunity is Earned, • Solutions Provider, • Trustworthy, • Driven to Succeed, • Confident but Humble JOB DESCRIPTION: Seeking several Field Service Boiler/Burner/Controls Technicians. Experience is a big plus however we will train apprentices as well. Position primarily requires a positive attitude with solution-oriented approach to problem solving. Must take pride in your work and have ability to work as part of a team. As factory authorized service technicians, we demonstrate the highest levels of professionalism and capability to support our equipment. World-Class customer service and efficiency is our goal! If you are driven to establish a career in this industry but do not have the experience in essential functions listed below; you should still apply if you can meet our responsibilities/expectations and physical demands. ESSENTIAL FUNCTIONS: • Hands-on ability for combustion tuning and analysis as well as troubleshooting skills to determine and adjust a full range of burners from .5 to 30 MMBTU input, • Factory start-up and commissioning of various C&I thermal equipment including hydronic boilers, high- and low-pressure steam systems including firetube and industrial water tube boilers, steam turbines, heat exchangers, snow melt systems, etc., • Boiler room analyses for possible opportunities to improve reliability and efficiency, • Understanding of all types of hot water and steam (high pressure & low pressure) boiler support equipment to include deaerators, feed systems, blow down systems, economizers and waste heat recovery equipment, • Understanding of wiring diagrams, electrical, controls and instrumentation, • Burner upgrades/conversions, • Advanced Burner control upgrades/conversions, • Implementation of energy efficiency measures, • Technical report writing BENEFITS: • Service vehicle with gas card (once trained and independent), • Company-issued cell phone, • Extensive technical training & professional development opportunities, • Health Insurance including medical, dental, vision, life, ad&d, long term disability, • 401K, • Vacation and paid sick time, • Compensation commensurate with experience, • Paid travel time - to and from the job site, • Guaranteed 40 hours/week RESPONSIBILITIES/EXPECTATIONS: • Perform scheduled & emergency maintenance/repair of the equipment and all other associated equipment, • Perform installation of the equipment at customer sites as well as conducting pre-installation assistance, • Must be available for "On Call" 24 hour emergency service rotation. Additional compensation is provided when "On Call". Overtime/Double-time compensation paid for work performed outside of normal business hours., • Scheduled night and weekend work is sometimes required to meet customer needs. Advance notice will be provided and will show flexibility/consideration whenever possible., • Must have attitude and aptitude to develop a high level of customer service skills, as well as the ability to respond quickly to service calls with good time management and planning, • Must be motivated and possess a fast-paced personality with strong work ethic, • Must work effectively with little or no supervision once trained, • Able to read, write and have good oral communications skills in English, other languages a plus, • Computer ability should be proficient for producing required reports, • Must maintain a valid Driver's License to drive rental vehicles & able to pass a DOT physical for driving fleet vehicles as required, a CDL is not required, • Maintain company provided equipment, tools and or fleet vehicle as per company policy., • Requires completion of company provided confined space & lockout/tagout training in order to work safely as part of a team., • Responsible for the prevention and/or mitigation of any environmental impact associated with job-related tasks, accidents, and emergency situations or conditions., • Actively promotes safe behaviors and health awareness at all times in the execution of daily tasks This opportunity offers a competitive salary (commensurate with experience) 401k, generous health benefits, company paid life/ AD&D, company paid training with future advancement opportunities. Blake Thermal Sales & Service Inc. is an equal opportunity and affirmative action employer. We do not discriminate by race, color, gender, sexual orientation/ gender identity, religion, ethnic or national origin, sex, age, disability status, or status as a covered veteran. Successful candidates must pass a pre-hire background check, drug test and DMV check and provide proof of eligibility to work in the U.S. without sponsorship. Blake Thermal Sales & Service, Inc. is a proud drug-free workplace.

Job Description TEXT "GOMILES" to 720-459-4415 to APPLY! GO Car Wash is one of the fastest growing car wash operators in the United States, with locations in multiple states from coast to coast. And we keep adding more! If you have a knack for fixing things and a passion for ensuring everything runs smoothly, then join us as a Maintenance Technician! As a Maintenance Technician at GO Car Wash, you’ll be responsible for installing, repairing, and servicing equipment at multiple car washes. You’ll work with your leader and site managers to ensure the day-to-day maintenance and equipment is maintained while managing costs, necessary to give our customers a convenient, consistent, exceptional car wash experience. For you to be successful, we’re looking for: • 2+ years’ experience in industrial/ commercial equipment troubleshooting., • Experience with air compressors, electrical, 3 phase motors, VFDs, motor controls, hydraulics, pluming, and pneumatics., • Demonstrate proficiency in the safe use of power tools and heavy equipment., • Forklift, welding and electrical experience and/or certification preferred, but not required., • Car wash experience preferred, but not required., • High School Diploma or Equivalent You must also be able to: • Deliver excellent customer service, • Communicate clearly, engage, and lead others by example, • Organize time and work to effectively and efficiently complete varying responsibilities, • Comply with all safety policies, procedures, and PPE requirements Base wage is starting at $30 per hour. We also offer competitive health, 401(k), and paid time off benefits, plus free car washes, as well as an opportunity to grow your career with us You will be paid for commute, drive time along with a company provided vehicle, fuel card and power tools. Offer will depend on location and level of job-related knowledge, skills, abilities, and experience. To learn more about us, go to www.gocarwash.com (http://www.gocarwash.com). NOTE: You'll be required to complete a satisfactory criminal background and motor vehicle check after being hired for this job. All qualified applicants will be considered for employment without regard to age, race, color, national origin, religion, gender, gender identity, sexual orientation, disability or veteran status, or any other actual or perceived basis protected by law. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.

Job Description Facilities Maintenance Technician Pay: $28.00–$34.00/hour, based on experience Schedule: Monday–Friday, 3:00 PM–11:00 PM (training may be on a different shift) Position: Temp-to-Hire | Weekly Pay | Benefits Upon Hire Job Summary We are seeking an experienced Facilities Maintenance Technician to assist with the upkeep, maintenance, and general repair of buildings in an industrial environment. The ideal candidate has hands-on experience with maintenance tools, equipment, and building upkeep in an industrial facility. This is a great opportunity for a dependable, hands-on individual who can follow detailed instructions, work independently, and safely perform maintenance tasks in an industrial setting. Key Responsibilities • Assist with general building upkeep and facility maintenance., • Perform hands-on maintenance tasks using basic tools and maintenance equipment., • Follow assigned task lists and complete work according to established procedures., • Communicate work progress and provide updates on completed tasks., • Use a tape measure and apply basic math skills to complete maintenance assignments., • Safely use step ladders up to 8 feet., • Lift, carry, and move materials weighing up to 50 pounds., • Work safely in an industrial and construction-type environment., • Perform duties in areas that may not be temperature-controlled., • Follow all safety guidelines and instructions while completing assigned tasks. Qualifications & Requirements • Minimum 3 years of industrial facilities maintenance experience (apartment complex/residential maintenance does not qualify)., • High school diploma or GED., • Familiarity with basic tools, maintenance equipment, tape measures, and basic math., • Ability to follow instructions and work independently with minimal supervision., • Ability to lift up to 50 lbs. and work in non-climate-controlled environments., • Ability to safely use step ladders up to 8 feet. Apply Today! #zr

Job Description Service Coordinator Northeast Dock & Door, a Division of Thompson & Johnson Equipment Full Time | $24.00 to $26.00 per Hour, Depending on Experience | Comprehensive Benefits Package Join a Company Where Your Work Makes a Difference Since 1954, Thompson & Johnson Equipment has built its reputation by investing in our employees, supporting our customers, and Delivering Our Promise every day. As a family owned company, we believe our employees are our greatest asset. We are committed to providing a workplace where people are respected, supported, encouraged to grow, and given opportunities to build rewarding careers. Northeast Dock & Door (NEDD) is a division of Thompson & Johnson Equipment specializing in dock and door equipment, products, service, and solutions for commercial and industrial customers. As NEDD continues to grow, we're looking for a Service Coordinator/Dispatcher to help coordinate and support our field service operation. Position Overview This position goes well beyond traditional dispatching. As our Service Coordinator/Dispatcher, you'll help keep the entire service process moving—from planning and scheduling field technicians to monitoring work in progress, communicating with customers, coordinating parts and job requirements, and following work through completion. You'll be a central point of communication among our customers, Installers/Technicians, Parts, Sales, and Operations, helping make sure everyone has the information they need and potential issues are addressed before they affect the customer. What You'll Do • Schedule and coordinate field service Installers/Technicians for breakdowns, preventive maintenance, repairs, installations, and other customer work., • Pre-plan upcoming service work and PMs to help ensure jobs are properly prepared., • Prioritize and adjust schedules based on customer needs, urgency, technician availability, geography, parts availability, and changing priorities., • Coordinate larger installation schedules and projects with Operations and field employees., • Monitor Work in Progress and follow up on open work orders and outstanding documentation., • Review work orders for completeness and accuracy, including labor, parts, service notes, and other required information., • Monitor technician time records related to service work and follow up on missing or incomplete information., • Communicate with customers regarding appointments, scheduling changes, job status, service results, and follow up., • Build and maintain positive customer relationships by keeping customers informed throughout the service process., • Coordinate with Parts, Sales, Operations, suppliers, and field employees to help ensure jobs are properly prepared., • Track parts and other information that may affect scheduling or completion of customer work., • Assist with repair quotes, customer approvals, purchase order information, and service documentation., • Maintain accurate customer, work order, and service information in Company systems., • Identify and help resolve scheduling, parts, documentation, or service issues before they become larger problems., • Serve as the primary contact for after hours emergency service calls, including nights and weekends, coordinating technician response and customer communication. The Operations Manager provides coverage during approved absences., • Provide administrative and coordination support throughout Northeast Dock & Door as needed. What You'll Bring We're looking for someone who is organized, dependable, comfortable working with both customers and field employees, and able to keep multiple moving pieces on track. • Previous experience scheduling and coordinating field service technicians in overhead door and loading dock service or another building trade is strongly preferred., • Experience in construction, industrial service, material handling, or another field service environment is a plus., • Strong organizational, planning, and follow through skills., • Strong customer service and communication skills., • Confidence communicating with customers and field employees by phone, email, and in person., • Ability to manage multiple priorities, interruptions, and changing schedules in a fast paced environment., • Strong attention to detail and accuracy., • Good problem solving skills and the ability to recognize issues before they affect the customer., • Strong computer skills, including Microsoft Office, and the ability to learn and effectively use work order and service management software., • Ability to work effectively with different personalities and communication styles., • Ability to work independently while collaborating with employees throughout the organization., • Reliable and predictable attendance., • Ability and willingness to be available for after hours emergency service calls, including nights and weekends. Why You'll Be Successful at Thompson & Johnson At Thompson & Johnson, we're looking for more than experience. We're looking for people who take ownership of their responsibilities and understand the importance of following through. Successful employees are dependable, organized, professional, and respectful. They communicate well, build strong relationships, anticipate problems, look for solutions, adapt when priorities change, and understand that keeping employees informed is an important part of keeping customers informed. Most importantly, they take pride in helping us Deliver Our Promise. Full Time Benefits We believe in investing in our employees by offering a competitive compensation and benefits package, including: • Low cost medical, dental, and vision insurance., • 401(k) retirement plan with a 50% Company match on the first 5% contributed., • Paid vacation and sick time., • Paid Company holidays., • Company paid life insurance., • Disability insurance., • Company clothing allowance., • Wellness reimbursement program., • Employee referral program., • Opportunities for training, professional development, and career advancement., • Company events and celebrations, including our annual employee celebration, which alternates between the Clambake and Dinner Dance Gala., • A supportive, family oriented work environment where employees are valued and respected. Build Your Career with Thompson & Johnson If you enjoy being the person who keeps things organized, communicates with customers and field employees, solves problems, and makes sure work keeps moving, this could be a great opportunity to grow with Northeast Dock & Door and Thompson & Johnson. As NEDD continues to grow, you'll have an opportunity to play an important role in helping us strengthen our service operation and the experience we provide our customers. Equal Employment Opportunity Thompson & Johnson Equipment Co., Inc. is proud to be an Equal Opportunity Employer. We are committed to creating a workplace where all employees are treated with dignity and respect and where employment decisions are based on qualifications, merit, and business needs.

Job DescriptionThruway Fasteners, Inc. is one of the leading distributors of industrial products, supplying hundreds of original equipment manufacturers in 40 states and 28 countries. We help customers increase efficiency, drive growth, and rapidly respond to unique business challenges and opportunities. Thruway utilizes custom technology applications and vast industry specific knowledge to develop unique and flexible product management solutions. Headquartered in North Tonawanda, NY, Thruway has six branch locations across New York, Pennsylvania and Georgia. The Warehouse Associate is responsible for completion of all customers orders filled including; filling customer orders and delivering them to a delivery platform in a manner that meets company standards. Operate a forklift to pull and store bins in a neat and orderly manner. Safe operation of all equipment is the top priority of this position. This individual is a generalist that can perform all the duties of physically receiving, picking, packing, kitting, shipping and cycle-counting. Essential Functions • Receiving: upload incoming deliveries and complete a visual inspection for damage. Verify counts and items are correct and match up with the packing slips. Receive product into internal system, • Order picking: locate product in warehouse using picket ticket. Check product and verify quantity, • Packing Orders: ensure items picked are correct and package to customer's requirements. Label as required by customer, • Shipping: package shipments per customer's request. Coordinate with shipping companies to meet customer's request. Set up delivery schedule for in house deliveries, • Quality Control: ensure all orders are correct to customer's sizes and specifications (measure if required) check fit-form-function. Check that orders are accurate and free of any defects, • Package and weigh any orders to customer's requirements. Conduct physical inventories as required, • On a daily basis, inspect and do routine maintenance on equipment, • Takes care of trash and cardboard in work area to keep clean, • Reads, orders and makes a list to pull and put away bins in a fast but safe speed, • Uses the monthly check list to ensure forklift is in proper working condition Required Qualifications • Self-starter with outgoing personality, positive attitude, attention to detail, • Excellent communication skills including listening and reading comprehension, • Team-player who is willing to help others as needed, • Read and count accurately, • Professional demeanor and appearance, • Safely operate forklift and pallet jacks, • Prior warehouse experience is preferred, but not required, • PPE- Safety Gloves, • Possession a valid Driver's license Work Environment • Occasionally works near moving mechanical parts. The noise level in the work environment is moderate to loud, • Frequently required to use hands to finger, handle or feel objects, tools or controls and to climb or balance, • Regularly required to walk, stand, sit; reach with hands and arms; stoop, kneel, crouch; and talk or hear, • Ability to lift and move objects up to 50 pounds., • Specific vision abilities required include: close vision, peripheral vision, depth perception and the ability to focus, • Occasional travel at other Thruway or customer locations may be required Job Type: Full-time Schedule: Monday-Friday Day shift Location: Syracuse, NY Thruway Fasteners, Inc. offers a competitive and comprehensive benefit program with an employer contribution for eligible employees: • Medical plan options including a Co-Pay plan and High-Deductible Healthcare plans, • Dental (including orthodontic coverage for dependents up to age 19), • Vision plan with either Davis or VSP networks, • Company paid Basic Life, AD&D and State Disability, • Health Savings Account (HSA), • Voluntary life insurance, • Voluntary short-term and long-term disability, • Voluntary critical illness, accident insurance, theft & legal services, hospital indemnity, • Employee Assistance Program, • Paid Time Off, • Paid Holidays, • 401k retirement plan with employer match, • Employee Referral Program Thruway Fasteners, Inc. is an Equal Opportunity Employer committed to engaging a diverse workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. The chosen candidate must successfully pass pre-employment background check and drug screen.

Job Description Label Machine Operator Iconex | Liverpool, NY Night Shift: Sunday–Thursday, 10:00 PM–6:00 AM Pay: $23.00–$25.00/hour + $3.50 night differential = $26.50–$28.50/hour Position Overview Iconex is seeking an experienced Machine Operator to safely operate and maintain high-speed label manufacturing equipment. This is not an entry-level position. Candidates should have at least 2 years of industrial manufacturing equipment experience, preferably in printing, labels, packaging, converting, paper, plastics, or similar environments. Key Responsibilities • Set up, operate, adjust, and troubleshoot label manufacturing equipment., • Perform machine changeovers and adjustments to maintain quality and productivity., • Inspect products using calipers, rulers, gauges, and other measuring tools., • Perform minor mechanical adjustments and preventative maintenance., • Monitor inks, adhesives, coatings, and raw materials., • Identify and correct quality issues during production., • Record production, downtime, and quality information using computer systems., • Maintain a clean, organized work area and follow 6S standards., • Work closely with Maintenance, Quality, and Production teams., • Follow all safety procedures and identify potential hazards. Requirements • 2+ years of industrial manufacturing machine operation experience., • Experience troubleshooting and adjusting production equipment., • Ability to read work instructions and production specifications., • Experience using measuring tools such as calipers, rulers, or gauges., • Basic computer skills., • Ability to stand for an entire shift and lift up to 50 lbs., • Strong attendance, reliability, and attention to quality. Preferred: Experience with printing, labels, flexible packaging, paper, plastics, converting, laminating, slitting, extrusion, press operation, roll-to-roll, or other high-speed automated equipment. Why Iconex? • $26.50–$28.50/hour potential pay, • $3.50/hour night shift differential, • Full-time, stable manufacturing career, • Training and advancement opportunities, • Modern manufacturing environment, • Strong safety culture and team-oriented workplace About Iconex Iconex is a leading provider of label solutions serving industries including quick-service restaurants, hospitality, grocery, retail, pharmacy, e-commerce, logistics, and manufacturing. The company focuses on innovative labeling technologies that improve efficiency, accuracy, productivity, and sustainability. M2SP *LI-MD1

Job DescriptionDescription: STATUS: Non-Exempt DEPARTMENT: Production REPORT TO: Production Supervisor JOB SUMMARY: The Crane Operator is responsible for operating various types of cranes to lift, move, position, and transport heavy materials, machinery, or equipment on construction sites, manufacturing plants, shipping yards, or other industrial settings. Your role will involve ensuring the safe and efficient operation of electric, diesel, and gasoline cranes while adhering to all safety protocols and regulations. ESSENTIAL JOB DUTIES: • Required to safely operate different types of cranes including mobile, tower, overhead, or hydraulic cranes according to job requirements., • Lift, position, lower heavy materials/equipment using proper rigging techniques & equipment., • Strictly adhere to safety guidelines, procedures, and regulations to prevent accidents or injuries during crane operations., • Perform routine inspections and maintenance on cranes to ensure optimal functionality. Report any malfunctions or issues promptly., • Maintain clear and effective communication with ground crew, signalers, and other workers to ensure safe and efficient operations., • Assess and prepare the work area before crane operation, ensuring stability and adequate space for maneuvering., • Maintain accurate records of daily activities, including lifts performed, equipment inspections, and maintenance logs., • Troubleshoot operational issues and make adjustments as needed to ensure smooth crane functionality., • Collaborate with other construction or site personnel to coordinate crane movements and tasks effectively., • Respond promptly/effectively in emergency situations, preventing accidents and mitigate risks., • Wears PPE appropriate for the work assignment., • Other duties as required. Requirements: QUALIFICATIONS: • High school diploma or GED is required; additional applicable training or certifications are preferred., • 3+ years of experience operating cranes in a construction environment., • Crane Operator Certification (NCCCO) or equivalent is required., • Knowledge of crane operation procedures, load calculations, and rigging techniques., • Strong understanding of safety standards and practices related to crane operation., • Ability to read and interpret load charts, blueprints, and rigging plans., • Excellent hand-eye coordination and manual dexterity., • Strong communication skills and ability to follow instructions & coordinate with team members., • Valid driver’s license and ability to travel to different job sites as needed., • OSHA certification or additional safety training helpful., • Experience with various crane types (e.g., rough terrain, lattice boom, all-terrain) desired., • Knowledge of crane maintenance and troubleshooting necessary. EQUIPMENT LISTING (MACHINES, TOOLS & SOFTWARE): Advanced computer skills that include purchasing software, as well as the ability to send/receive e-mail and work with other purchasing software. Must be able to read, create and change blueprints and drawings. Must be able to operate Computer, Email, Microsoft Excel, Microsoft Word. May be required to operate Printer, Copier, Fax Machine, Telephone, Scanner, and calculator, micrometers and gages. MENTAL AND VISUAL DEMAND: Moderate mental and visual attention to coordinate materials for manual work, machine operations, setups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation. SUPERVISORY RESPONSIBILITIES Directly supervises various employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. PHYSICAL ACTIVITIES AND DEMANDS: Moderate Lifting: Exerting up to 10 pounds of force frequently and/or up to 25 pounds of force occasionally and/or up to 100 pounds on rare occasions, with assistance. ENVIRONMENTAL CONDITIONS: Production Environment – While performing the duties of this job, the employee is exposed to work near moving mechanical parts;extreme heat (non-weather);risk of radiation and vibration. The noise level in the work environment is usually loud. During hot weather, work processes can produce condensation on the floor resulting in slippery conditions. Employees are required to wear steel toed, slip resistant shoes while working in production areas. Safety Equipment - May wear a variety of PPE in production areas including safety glasses with side shields, safety shoes and other PPE in accordance with assigned work tasks. EMPLOYER'S DISCLAIMER: • All requirements are subject to modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job DescriptionJob Description The work involves responsibility for the instruction and training of governmental employees in vehicles and occupational safety. The work is carried out in accordance with federal and local regulations and involves the identification of safety problems, the design and implementation of safety programs, as well as conducting training and safety courses to ensure that local governmental employees follow standard safety practices and procedures in carrying out their work assignments. Work is reviewed by an administrative superior who allows the incumbent considerable latitude for the exercise of independent judgment in the design and implementation of safety programs. When assigned to Onondaga County Department of Transportation, an employee in this class is primarily responsible for vehicular safety and safety practices concerned with highway maintenance and construction. The work may include laying out and supervising the work of subordinates as well as participating in and sharing in the work assigned. Reviews of work procedures are performed to ensure compliance with safety rules and regulations from interdepartmental supervisory personnel. Does related work as required. Typical Work Activities • Identifies present and potential safety problems by inspecting departmental operations and informing the employees of safety hazards., • Informs department heads and other supervisory personnel of operating procedures not in compliance with safety guidelines and works with them to establish standard operating procedures incorporating needed safety precautions into operations., • Designs safety programs upon the occurrence of dangerous situations by researching available data on safety procedures applicable to respective departmental functions and determines what training resources to utilize based upon safety hazards observed., • Performs full inspections and works with supervisory personnel to ensure ongoing compliance with safety program and safety regulations., • Conducts safe driving courses by giving classroom and field instructions to personnel and depending on assignment, conducts courses in such areas as driving tactics in normal speed, crash avoidance, emergency braking, skidding and blowout procedures, snowplow driver training, wing man training, defensive driving course instruction, pre-trip and post-trip inspections., • Trains employees in the safe ways to operate lawn mowers, jack hammers, chain saws, trucks, construction equipment and all other motor and motor-driven equipment operated in government., • Conducts research and statistical studies to determine causes of accidents and to outline the effects safety programs have on accident prevention in government., • Recommends the purchase of equipment to maximize the safety of the public and its employees., • May conduct on-the-road-training and instructional training for employees who want to increase driving skills, train for license upgrades, train for a specific certified driver's license or specific endorsement(s).Knowledge, Skills, and Abilities, • Good knowledge of federal, state and local laws, rules and regulations regarding occupational and vehicle safety health hazards., • Good knowledge of the principles, practices and methods employed in occupational and vehicle safety., • Good knowledge of recent developments, current literature, and sources of information relating to occupational and vehicle safety programs., • Good knowledge of principles, practices and techniques involved in safety training and instruction., • Skill in the safe operation of all vehicles, mechanical, plumbing, electrical and other industrial motor and motor driven equipment operated in municipal government., • Ability to make detailed field inspections and to recognize potential safety and health hazards., • Ability to instruct individuals and assess their capabilities in a practical situation., • Ability to enforce regulations firmly, tactfully and objectively., • Ability to deal effectively with department heads, supervisory personnel, other employees and the public., • Ability to plan, supervise and organize the work of others., • Ability to keep records and make reports.Minimum Qualifications Promotional: • One (1) year of permanent class status in the title of Equipment Operator Instructor; or, • Three (3) years of permanent non-competitive class status in the title of Highway Maintenance Worker II. Open Competitive: • A) Two (2) years of work experience, or its part-time equivalent, in developing and presenting instruction in safety programs, at least one (1) year of which must have involved vehicle and equipment safety; or, • B) Two (2) years of work experience, or its part-time equivalent, in training and evaluating in the operation and maintenance of complex heavy construction equipment or trucks over thirteen tons in weight. Must have certification by a recognized institute in training/evaluating on equipment used.Special Necessary Requirement Possession of a valid New York State CDL, including any special endorsements, as required for the type of vehicle being operated. Where possession of a license is required, eligibility for and continued possession of the license is required for employment. Possession of Excavator Certification is required to perform excavation duties in accordance with New York State General Business Law. Certification must be obtained during the probationary period. Training will commence upon appointment. Eligibility for and continued possession of the license is required for employment. Benefits • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Vision insurance, • Retirement plan The Affirmative Action Policy of the City of Syracuse is to provide equal employment opportunity for all individuals regardless of race, color, sex, religion, creed, age (18 and over), marital status, national origin, disability, veteran status, gender identity or gender expression, sexual or affectional preference or orientation, or any other classified group within the protected class. The City also complies with 31 CFR part 51. If you have a disability for which you wish special accommodation to be made, contact the Office of Human Resources at 315-448-8780 or personnel@syr.gov. All offers of employment will be contingent on the successful completion of a background check and/or drug screen. Job Posted by ApplicantPro

Job DescriptionDescription: Job Summary: The Manufacturing Engineer position is quite varied regarding the scope of work performed. This position is responsible for creating and enhancing processes and systems by leveraging new technologies and automation. This position will research automation techniques, test new systems for efficiency and assist in the planning of factory layouts to optimize production. Requirements: Essential Functions of Position: • Work with Product Design Engineers and Production Engineers to improve product design for ease of manufacturing and assembly., • Analyze production processes, schedules, methods and other data and then provide management with reports containing the data and statistics to enable management to better understand future requirements needed to improve/ optimize the manufacturing process., • Analyze and plan workflow, equipment placement and space requirements to improve manufacturing efficiency, • Analyzing production data to determine route causes for machine downtime. Implement preventative maintenance schedules and help train new operators on proper machine operation for optimal performance., • Coordinate equipment, maintenance and repairs to ensure manufacturers procedures and instructions are followed in order to keep production equipment operational., • Maintain manufacturing process documentation (SOP’s), including technical reports and process specifications, • Look for continuous improvement opportunities through Lean Waste reduction, 5S value stream mapping or other lean principles, • Ensure quality is maintained, • Collaborate with other engineering resources to ensure efficient production, • Perform other duties as assigned. Minimum Qualifications: • The ideal candidate has a strong understanding of manufacturing equipment and processes, excellent problem-solving abilities, and a keen eye for detail., • Associates degree in relevant field with related work experience., • Knowledge of how mechanical systems and processes work., • Comfortable working in a fast-paced environment., • Exceptional organizational and time management skills, • Excellence in verbal and written communication and ability to work as part of a team. Preferred Qualifications: • Bachelors in mechanical or Industrial engineering, • 3-5 years in a manufacturing environment completing Engineering design work. Physical Requirements: • Required to sit, stand, and walk; for up to 8 hours per day., • Ability to work in a high volume and high stress environment., • Continuous use of the hand, arm, and fingers to operate a computer keyboard, telephone, and other office equipment., • Ability to lift up to 20 pounds occasionally., • Ability to communicate professionally, in written and oral communications.

Job Description We’re seeking a highly organized, detail-oriented and customer-focused Spare Parts Coordinator to join our growing Service team in Syracuse, NY. Do you have experience managing inventory, logistics, replenishment planning or warehouse operations? Are you comfortable working with inventory management systems and analyzing data to ensure parts are available when and where they are needed? Do you enjoy working across teams and supporting customers in a fast-paced, technical environment? If yes, please keep reading! As a Spare Parts Coordinator, you will own and operate Bluefors’ North American spare parts operation from our Syracuse warehouse and logistics hub. You will be responsible for maintaining inventory levels, coordinating replenishment and order fulfillment, and ensuring critical replacement parts reach customer sites quickly and efficiently. This highly visible role will serve as a key liaison between Service, field service engineers, customers, warehouse partners and our Finland operations team. Your tasks as a Spare Parts Coordinator will include managing inventory for the North American installed base, identifying critical spare parts and maintaining min-max inventory levels based on system types and failure frequency. You will coordinate replenishment, process spare parts orders, arrange shipments and monitor stock availability to support customer service needs and minimize equipment downtime. You will also manage the commercial relationship with our Syracuse warehouse partner, audit inventory and shipment data, maintain accurate SKU and inventory records, and identify slow-moving inventory. Working closely with the Service team, you will forecast demand, proactively stage parts for preventive maintenance activities and track parts expenditures by customer and system type. You will also coordinate international freight and customs documentation for shipments from Finland when parts are not available locally, support reporting and continuous improvement initiatives, and help improve warehouse operations, inventory accuracy and overall service efficiency. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay range: $25.96 - $31.73/ hr. (DOE) Your main responsibilities would be Own and operate the North American spare parts hub in Syracuse, including inventory levels, replenishment cycles and fulfillment activities. Maintain a min-max inventory model by identifying critical spare parts based on system type, failure frequency and service requirements. Manage the commercial relationship with the Syracuse warehouse partner, including inventory access, replenishment protocols and service level commitments. Process spare parts orders and coordinate shipments to customer sites while supporting targeted delivery timelines. Maintain and audit inventory, shipment and related data within inventory management systems. Collaborate with the Service team to forecast spare parts demand associated with preventive maintenance visits and proactively stage required inventory. Coordinate local inventory replenishment and monitor stock availability to minimize customer downtime. Audit warehouse inventory, maintain an accurate SKU catalog and identify slow-moving inventory. Track parts expenditures by customer and system type to support service cost analysis. Coordinate import customs documentation, freight logistics and import requirements for shipments from Finland when local inventory is unavailable. Maintain accurate inventory records and prepare inventory and logistics reports as requested. Support continuous improvement initiatives related to warehouse operations, inventory accuracy and service efficiency. Perform other duties as assigned. What we expect from you High school diploma/GED with a minimum of 3 years of experience and/or training in supply chain, logistics, spare parts management, warehouse operations or inventory control; or an associate or bachelor’s degree in Supply Chain Management, Logistics, Business Administration or a related field. Equivalent combination of education and experience will also be considered. Hands-on experience managing physical inventory, replenishment planning and inventory optimization. Strong organizational skills and attention to detail, with the ability to manage multiple priorities while maintaining accurate inventory and documentation. Experience using ERP, inventory management or CRM systems and the ability to export and analyze data using spreadsheets. Proficiency in Microsoft Office Suite, particularly Excel, for reporting, inventory tracking and data analysis. Strong analytical and problem-solving skills, with the ability to analyze inventory trends, identify stocking requirements and make recommendations that improve service levels and inventory performance. Excellent written and verbal communication skills, with the ability to collaborate effectively with customers, field service engineers, warehouse partners and global operations teams across multiple time zones. Ability to work independently in a fast-paced environment while staying aligned with internal teams. Professional, customer-oriented presence when working with customers and external partners. Willingness to travel as required. We also appreciate Experience with Salesforce, ERP or other inventory management systems. Knowledge of shipping, freight coordination, customs documentation and import/export processes. Familiarity with international freight, customs documentation and import compliance. Experience supporting technical, scientific, manufacturing or industrial equipment. Experience maintaining min-max inventory models, cycle counting and inventory optimization. Experience working in a customer-embedded environment while coordinating closely with internal teams. A structured and analytical approach to problem solving. Physical Demands While performing the duties of this job, the employee is frequently required to sit, stand, walk, reach with arms and hands, and use hand and finger dexterity. The employee is regularly required to see, talk and hear. In an office setting, the employee may occasionally stoop, kneel or crouch. The employee will frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Work Environment This role operates primarily in an on-site warehouse and office environment. Occasional travel may be required for customer site visits, training, or meetings with global operations. Personal protective equipment (PPE) may be required when working in warehouse or technical environment. Note: that this role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job Description Maintenance Manager - Automation & Controls Location: Syracuse, NY Salary: $100,000–$115,000 + bonus and comprehensive benefits Schedule: On-site Our client is a global manufacturing company with a strong presence in the packaging industry. They are seeking an experienced Maintenance Manager to lead automation, controls, engineering initiatives, and technical talent at a local manufacturing site. This is an excellent opportunity for an experienced automation or controls leader who enjoys both the technical and people-management aspects of manufacturing. Key Responsibilities • Lead site automation and controls strategy and initiatives, • Oversee automation systems, controls infrastructure, and manufacturing technologies, • Manage capital projects from concept through commissioning, • Drive equipment reliability, uptime, OEE, and downtime improvements, • Partner with Operations, Maintenance, Quality, Safety, and Supply Chain, • Lead, coach, and develop engineering, automation, maintenance, and technical staff, • Identify opportunities for new technology and continuous improvement, • Establish technical standards, documentation, and best practices, • Support employee development, training, cross-training, and succession planning Qualifications • Bachelor’s degree in Engineering, Electrical Engineering, Automation, Mechatronics, or related technical field, • 5+ years of manufacturing engineering, automation, controls, or technical leadership experience, • 3+ years of people leadership experience, • Strong experience with PLCs, HMI/SCADA, industrial networks, and manufacturing controls, • Experience managing capital projects and cross-functional initiatives, • Strong understanding of manufacturing reliability and continuous improvement, • Excellent leadership, communication, coaching, and problem-solving skills Preferred: Experience in packaging, food, beverage, pharmaceutical, or another highly regulated manufacturing environment, along with Lean, Six Sigma, TPM, or Operational Excellence experience. To be considered, please submit your resume today!

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Manager, Process Safety is responsible for leading and continuously improving the site's Process Safety Management (PSM), Electrical Safety, and Energy Control programs. This position serves as the site Subject Matter Expert (SME) for process safety and operational risk management, ensuring compliance with applicable federal, state, and local regulations, industry standards, and company policies while supporting safe, reliable, and compliant manufacturing operations. Additionally, this position will be the lead HSE contributor for maintenance of LOTTE's International Organization for Standardization (ISO) 45001 certification. The position partners closely with Operations, Engineering, Facilities, Maintenance, Quality, Validation, and Corporate HSE to identify, assess, and mitigate risks associated with manufacturing processes, utilities, equipment, and facility operations. This position drives a proactive safety culture through technical expertise, risk-based decision-making, regulatory compliance, and continuous improvement initiatives. This position must comply with all Security requirements, Health, Safety, and Environment (HSE) regulations, and current Good Manufacturing Practices (cGMPs) applicable to the job function. Duties & Responsibilities • Serve as the site Subject Matter Expert (SME) for Process Safety Management (PSM), Electrical Safety, and Energy Control (LOTO) programs., • Lead the implementation, maintenance, and continuous improvement of site Process Safety Management programs to ensure compliance with OSHA PSM, EPA Risk Management Program (RMP), NFPA requirements, and company standards., • Facilitate Process Hazard Analyses (PHA), HAZOP studies, risk assessments, and other structured hazard evaluation processes to identify, assess, and mitigate operational risks., • Manage the site's Management of Change (MOC) program, ensuring health, safety, environmental, quality, and operational risks are appropriately evaluated and controlled prior to implementation., • Partner with Operations, Engineering, Facilities, Maintenance, and Quality teams to integrate process safety principles into manufacturing operations and business processes., • Support the design, installation, startup, qualification, and modification of manufacturing equipment, utility systems, facilities, and processes to ensure safety and regulatory requirements are met., • Administer and continuously improve Electrical Safety and Energy Control programs, including Arc Flash assessments, Lockout/Tagout compliance, training programs, and risk mitigation activities., • Lead process safety reviews associated with new technologies, capital projects, process modifications, and equipment installations.\, • Coordinate internal and external ISO45001 audits with third-party consultants and internal resources. Contribute to other ISO certifications as assigned., • Execute industrial hygiene exposure monitoring in coordination with the site's Industrial Hygienist., • Act as the HSE representative for client projects as assigned., • Conduct compliance audits, inspections, program assessments, and field observations to evaluate effectiveness of safety controls and identify opportunities for improvement., • Lead or facilitate incident investigations, root cause analyses, and development of corrective and preventive actions (CAPAs) related to safety, process safety, and operational events., • Monitor, analyze, and report process safety and HSE metrics, key performance indicators (KPIs), and leading indicators to drive continuous improvement., • Maintain regulatory records, compliance documentation, and required reports for internal and external stakeholders., • Support contractor safety and qualification programs to ensure adherence to company safety requirements and industry best practices., • Serve as a site representative during regulatory inspections, customer audits, and corporate assessments related to process safety and HSE compliance., • Deliver technical training, coaching, and guidance on process safety, hazard recognition, risk mitigation, and regulatory requirements., • Participate in emergency response planning and provide technical support during emergency events and operational incidents., • Stay current with emerging process safety technologies, regulatory developments, and industry best practices to enhance site performance., • Support the Senior Manager, HSE with departmental objectives, strategic initiatives, budgeting activities, and continuous improvement efforts., • Participate on cross-functional teams, committees, and corporate initiatives as required., • Perform other duties as assigned. Education & Experience • Bachelor's degree in Environmental Health & Safety, Engineering, Industrial Hygiene, Chemistry, Biology, Occupational Health, or a related discipline required., • 7+ years of experience in Process Safety, Health, Safety & Environment (HSE), Operational Risk Management, or HSE program leadership within pharmaceutical, biologics, biotechnology, chemical, or other highly regulated manufacturing environments., • Demonstrated success leading risk assessments, process safety initiatives, incident investigations, and regulatory compliance programs., • Experience supporting enterprise-wide process safety and operational risk initiatives across complex manufacturing operations., • Professional certification such as: Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), Certified Process Safety Professional (CCPSC), or an equivalent credential preferred., • Knowledge of Arc Flash hazards, electrical safety, and NFPA 70E compliance programs preferred. Knowledge, Skills, Abilities • Strong knowledge of OSHA Process Safety Management (PSM), EPA Risk Management Program (RMP), NFPA standards, Electrical Safety, and Energy Control (LOTO) requirements., • Experience conducting Process Hazard Analyses (PHA), HAZOPs, risk assessments, incident investigations, and Management of Change (MOC) reviews., • Experience with the ISO45001 standard and maintaining a certified occupational health and safety management system., • Familiarity with standard industrial hygiene monitoring techniques including noise dosimetry, air sampling, and real-time monitoring instruments., • Working knowledge of cGMP requirements and pharmaceutical, biologics, biotechnology, or regulated manufacturing environments., • Strong understanding of risk management methodologies and operational excellence principles., • Ability to analyze complex technical issues and develop practical risk-based solutions., • Strong leadership, project management, organizational, and influencing skills., • Excellent written, verbal, and presentation communication skills., • Proficiency with Microsoft Office applications and HSE management systems., • Experience utilizing data analytics, performance metrics, and reporting tools to drive continuous improvement., • Ability to work independently and effectively within cross-functional teams., • Korean language proficiency is beneficial but not required. Physical Demands • Ability to sit, stand, walk, climb stairs and ladders, and traverse manufacturing, utility, warehouse, and office areas for extended periods., • Ability to conduct field inspections, audits, risk assessments, and incident investigations in operating manufacturing environments., • Ability to wear required personal protective equipment (PPE) and comply with site safety requirements., • Ability to lift, carry, push, and pull up to 25 pounds occasionally., • Ability to access confined or restricted industrial spaces, elevated work areas, and outdoor locations when required and in accordance with site safety procedures., • Ability to respond to emergencies, incidents, and business-critical situations, including occasional after-hours support for a 24/7 manufacturing operation., • Ability to travel between facilities and vendor or contractor locations as business needs require. Work Environment • This position operates in both office and manufacturing environments., • Routine exposure to active production, utility, laboratory, warehouse, and construction areas should be expected., • Position is based on a manufacturing campus and requires frequent presence in operational areas to support risk assessments, inspections, audits, investigations, and safety initiatives., • Work may involve exposure to noise, moving mechanical equipment, chemicals, temperature variations, and other industrial conditions typical of pharmaceutical and biotechnology manufacturing facilities., • Access to GMP and classified manufacturing areas is required and may necessitate the use of appropriate PPE, including safety glasses, hearing protection, safety footwear, hard hats, respirators, and other site-required protective equipment., • Occasional work outside of normal business hours may be required to support incident response, project activities, shutdowns, or a 24/7 manufacturing operation. Travel Less than 5% travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range $76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description Company Summary Our client is a growing industrial automation and systems integration company that designs, builds, and commissions automation solutions for manufacturers across a variety of industries. The organization works with PLCs, robotics, collaborative robots, conveyors, machine interfaces, sensors, controls, and other industrial automation technologies. The company is expanding its automation capabilities and is looking to add an experienced controls professional who can contribute to projects from programming and integration through installation and commissioning. This is an opportunity to join a growing team where the individual will have meaningful technical responsibility and the potential to grow into a broader leadership role as the business expands. Job Summary The PLC Programmer / Automation Integration Engineer will be responsible for programming, integrating, troubleshooting, and commissioning industrial automation systems. This position will have a strong emphasis on PLC programming and controls while also involving robot and collaborative robot integration, machine communication, HMI development, networking, sensors, motion control, and system troubleshooting. The ideal candidate is a hands-on automation professional who enjoys solving complex technical problems and working directly with equipment and customers. The ability to work across multiple automation platforms is more important than having deep expertise in one specific manufacturer or technology. The position is based in Syracuse, New York, with some flexibility for remote work when project requirements allow. The individual will spend time at the company's facility as well as customer sites during installations, commissioning, troubleshooting, and project implementation. Responsibilities • Program and modify PLC control systems using Ladder Logic, Structured Text, SFC, and other IEC 61131-3 programming environments., • Develop and modify HMI/SCADA applications for machine operation, diagnostics, alarms, recipes, and system monitoring., • Integrate industrial robots and collaborative robots into automated production systems., • Configure and troubleshoot communication between PLCs, robots, cobots, CNC machines, conveyors, HMIs, sensors, drives, and other equipment., • Integrate industrial networks and communication protocols including EtherNet/IP, EtherCAT, Modbus TCP, and similar technologies., • Configure and troubleshoot servo drives, VFDs, motion systems, and high-speed I/O., • Configure robot signals, sensors, pneumatic systems, safety devices, machine interfaces, fixtures, and other field I/O., • Assist with control system design, I/O development, electrical schematic review, device selection, and panel checkout., • Commission automation systems both internally and at customer facilities., • Troubleshoot mechanical, electrical, controls, networking, and software issues and determine root causes., • Perform PLC upgrades, machine communication improvements, controls modifications, and automation retrofits., • Provide technical support during customer installations and production startups., • Configure remote-access systems and provide remote troubleshooting support when appropriate., • Document PLC programs, network configurations, startup procedures, and system modifications., • Train customer maintenance and technical personnel on equipment operation and troubleshooting., • Work directly with customers to understand technical requirements and develop practical automation solutions., • Support technical sales activities, project planning, site assessments, and customer meetings when needed., • Develop reusable programming standards, function blocks, templates, and other tools to improve future projects., • Travel to customer locations for project assessments, installations, commissioning, and troubleshooting. Requirements • 3+ years of hands-on PLC programming experience in an industrial automation, controls, manufacturing, or systems integration environment., • Strong practical understanding of industrial automation and controls., • Experience programming PLCs and troubleshooting control systems in a production environment., • Working knowledge of IEC 61131-3 programming environments, including Ladder Logic and/or Structured Text., • Experience integrating PLCs with robots, machines, conveyors, HMIs, sensors, drives, and other industrial equipment., • Working knowledge of industrial communication and networking, particularly EtherNet/IP and/or EtherCAT., • Ability to read electrical schematics and troubleshoot control panels using appropriate diagnostic equipment., • Experience with servo drives, VFDs, motion control, or related automation technologies., • Strong troubleshooting and problem-solving skills with the ability to independently research issues and identify root causes., • Ability to work comfortably on the plant floor and directly with machinery and automation equipment., • Strong communication and interpersonal skills with the ability to interact professionally with customers, operators, maintenance personnel, and engineering teams., • Ability to manage projects and technical assignments with a high degree of independence., • Willingness and ability to travel approximately 25–40% for customer projects., • Valid driver's license and ability to travel throughout the United States., • Ability to work in a hands-on environment involving equipment installation, startup, testing, and commissioning. Preferred Requirements • Experience programming or integrating collaborative robots or industrial robots., • Experience with FANUC, Universal Robots, Doosan, or similar robotic platforms., • Experience with palletizing, packaging, material handling, machine tending, or conveyor automation., • Experience with CODESYS-based platforms, Rockwell Studio 5000, Siemens TIA Portal, Beckhoff TwinCAT, Panasonic, or similar PLC platforms., • Experience with vision systems such as Cognex, Keyence, or robot-integrated vision., • Experience with end-of-arm tooling, pneumatic systems, vacuum systems, and robotic grippers., • Experience with safety PLCs, safety-rated devices, machine guarding, and industrial robot safety standards., • Experience with remote-access systems, VPNs, industrial networking, or OT network architecture., • Experience with edge devices, industrial PCs, or gateway technologies., • Robot manufacturer certifications or formal robotics training., • Associate's or Bachelor's degree in Electrical Engineering, Electrical Technology, Mechatronics, Computer Engineering, Computer Science, or a related technical discipline., • Experience developing reusable PLC code, function blocks, programming standards, or automation libraries., • FANUC training or certification is a plus; additional training may be provided. Compensation & Benefits • Salary: $90,000–$110,000, depending on experience and capabilities., • Performance or project-based bonus opportunity., • Possible monthly vehicle/car allowance., • Company-paid business travel and travel-related expenses., • Health, dental, and vision insurance., • 401(k) with company match., • Paid time off and company holidays., • Company laptop, tools, and equipment necessary to perform the role., • Training and certification opportunities on new automation, robotics, and controls platforms., • Opportunity for increased responsibility and advancement as the automation business continues to grow. Location Syracuse, New York This is a primarily on-site position. The successful candidate will need to be available to work with automation equipment at the company's Syracuse-area facility and travel to customer locations for project implementation, installation, commissioning, and troubleshooting. Travel is expected throughout New York and the Northeast, with additional projects potentially requiring travel to the Southeast and other locations within the continental United States. Some remote work may be possible when project requirements permit. Typical customer assignments may include an initial site visit to assess the application and develop an implementation plan, followed by an installation and commissioning period. Travel frequency will vary based on the project schedule, with some assignments requiring overnight stays.

Job Description The Field Engineer is a highly technical, field-based role responsible for supporting the installation, commissioning, startup, testing, and operational performance of industrial standby and prime power generation systems. This role plays a critical part in ensuring generator systems, paralleling switchgear, automatic transfer switches (ATS), and control systems are installed, commissioned, and operating safely, reliably, and in accordance with design specifications. The Field Engineer works closely with Project Managers, Field Service Technicians, electrical contractors, and customers to deliver high-quality power system installations across Kinsley’s Northeast service territory. Installation Review & Field Execution: • Review electrical one-lines, wiring diagrams, control schematics, and submittals to ensure proper field execution., • Support installation teams in identifying scope gaps, constructability issues, and technical discrepancies., • Conduct site visits to monitor installation progress and document deficiencies. Generator Commissioning & Startup: • Develop and execute pre-functional and functional startup checklists., • Lead commissioning of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • Automatic Transfer Switches (ATS), • Load banks and associated controls, • Document commissioning results and provide turnover packages. Troubleshooting & Technical Support: • Diagnose and resolve complex electrical, mechanical, and control-related issues during startup and post-installation., • Support Field Service Technicians with advanced troubleshooting., • Analyze generator performance data to identify reliability concerns., • Assist in root cause analysis of system failures. Controls & Integration: • Support configuration and testing of:, • Generator controllers, • Paralleling logic and synchronization systems, • Remote monitoring systems, • Ensure proper integration of generators into facility electrical infrastructure. Customer Interface & Training: • Serve as the technical lead during startup and commissioning., • Provide customer training on system operation, emergency procedures, and maintenance requirements., • Deliver clear commissioning documentation and test reports., • Ensure smooth transition from installation to service support. Qualifications: • Equivalent field experience considered., • Experience in industrial generator systems, power distribution, or mission-critical backup power environments., • Strong knowledge of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • ATS systems, • Load bank testing, • Engine controls and protection systems, • Working knowledge of NEC, NFPA 110, OSHA standards., • Proven ability to troubleshoot complex power systems in live environments., • Strong communication and leadership skills in field settings., • Valid driver’s license required. Minimum of seven (7) or more years of experience in industrial generator service, commissioning, troubleshooting, repair, and overhaul. Required experience includes: · Diesel and natural gas generator systems · Paralleling switchgear and synchronization · Automatic Transfer Switches (ATS) · Load bank testing and performance validation · Engine and generator control systems Experience performing system startups, commissioning activities, and advanced troubleshooting in mission-critical environments (e.g., hospitals, data centers, utilities, industrial facilities) strongly preferred. Previous experience leading commissioning efforts, mentoring technicians, or serving as a technical escalation resource is a plus. Travel & Working Conditions: • Significant travel within Kinsley’s service territory, • Work performed in hospitals, data centers, industrial facilities, utilities, and construction environments., • Exposure to energized electrical systems, mechanical equipment, and outdoor conditions., • Ability to lift up to 100 lbs and work in physically demanding environments. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. The anticipated compensation range for this position is $130,000 to $180,000 annually. Actual compensation may vary based on skills, experience, certifications, location, and other business-related factors. Kinsley Group offers a comprehensive benefits package that may include medical, dental, and vision insurance, company-paid life insurance, disability coverage, paid time off, paid holidays, 401(k) with company match, employee assistance programs, and other company-sponsored benefits.

Job Description CenTrio is seeking a qualified Instrumentation & Controls Technician to join our team in Syracuse, NY! Location- Syracuse, NY Full-Time Permanent Onsite Compensation: $60,000–$80,000 annually, depending on qualifications and experience. Job Summary Under the direction of the Electrical and Controls Manager, this position will be responsible for installing, calibrating, repairing, and maintaining Customer steam and chilled water metering stations as well as instrumentation and control systems in the boiler houses and chilled water plant. Diagnose and troubleshoot issues with measuring, recording and control devices in a timely manner. Coordinate and communicate with plant operators and customers when servicing or calibrating metering and control equipment. Must also be able to program, troubleshoot, and maintain loop controllers, PLCs, and other types of logic controllers. The successful candidate will be a self-starter that enjoys working in a fast-paced environment, strong commitment to deadlines and team, is process oriented with a high sense of ownership in their work, possesses a high degree of intellectual curiosity, and has a superior controls and instrumentation foundation. Core Responsibilities • Install, calibrate, troubleshoot, and program field control devices including control valves, pneumatic damper drives, motor control circuits, VFDs, PLCs, and process control systems, • Develop calibration procedures and perform calibrations of process measurement and control system nodes., • Maintain and expand new control loops including associated panels., • Commission and integrate new systems within the facility., • Work with a preventive maintenance program., • Support and maintain established system standards and documentation for process control loops and analytical equipment., • Maintain calibration records and documentation, • Read complex schematics, wiring diagrams and shop drawings for the purpose of installation, troubleshooting, and repairing of major systems and minor subsystems and components, • Utilizes a wide range of test equipment, including recorders, computers, PC based software analyzer programs, oscilloscopes, data analyzers, analog and digital multi-meters, and other test equipment, while performing tests to identify problems and to maintain and calibrate equipment to performance standards, • Connects, disconnects, and tags out equipment and circuits for test or repair and safety of personnel and equipment, • Performs soldering on electronic components., • Maintains shop and storage areas in a neat and orderly fashion., • Maintains the safe and efficient use of materials, tools, test equipment and personal safety and all others working in the vicinity., • Cleans work area after work is complete., • Complies with plant policy and procedures, particularly those involving personnel and equipment safety., • Maintains and repairs network communications systems (i.e., fiber networks, Ethernet networks and network peripherals), • Maintains and repairs complete process systems and repair/replace subcomponents as required., • Maintains telephone and/or radio contact with operation and management personnel, • Maintains regular and punctual attendance, • Other duties as assigned Working Style to Be Successful in This Role: • Effectively communicate and work collaboratively at all levels of the organization in diverse work group settings and in concert with external resources., • Effectively use a variety of media (i.e., MS office suite, etc.) to convey technical data, concepts and ideas. Technical Skills & Requirements: • Strong knowledge of PLC/HMI/SCADA/DCS hardware and software., • Strong knowledge of various instrumentation, including flow, temperature, pressure, and valves., • Must have experience with development and integration of various communication protocols such as CIP, Modbus RTU and Modbus TCP/IP., • Be able to read and understand P&ID and PFD diagrams., • Must be proficient in the use of Microsoft Office Suite including Word, Excel, and Outlook., • Will work closely with the operations and maintenance lead personnel along with the Plant management., • Highly analytical with great attention to detail., • Demonstrated strong communication skills., • Exemplifies the right motivation by aspiring to achieve collective goals., • Collaborative and interpersonal skills., • A process-focused individual with a passion to drive and deliver effective change., • Self-motivated and proactive, with respect to both managing workload and professional development., • Ability to work in a dynamic, complex, fast-paced environment, to adapt quickly and to manage changing priorities. Professional Experience & Knowledge: • Associates Degree or vocational/ technical trade school in an electrical or electronic discipline or equivalent experience, • 1-3 years of previous work experience in a manufacturing or industrial process plant environment is strongly preferred Physical Requirements: • Frequent movement throughout plant areas (including mechanical rooms and platforms), • Must be proficient with all types of hand tools and power tools both electric and pneumatic., • Must be able to work with all types of PPE including (but not limited to); dust mask, half-face respirator, all manner of hand protection, eye protection and hearing protection., • Must be able to perform the following work in a safe manner; overhead, climb ladders, squat, bend, lift 100 lbs, perform in a confined space, dusty and noisy environment, work outdoors, plenum spaces, hot and cold environments., • Must be willing to work holidays, weekends and over-time., • Must be willing to work during all types of weather events including hurricanes and storms. Who is CenTrio? CenTrio is a fully integrated, innovative and sustainable energy services provider to a wide range of industries such as higher education & healthcare campuses, cities, and communities. It serves more with utility infrastructures serving more than 170+ million square feet of space and operations in 10 cities across the United States and growing. In each community, the company operates highly efficient and innovative utility infrastructures that produce and distribute electricity, steam, hot water and/or chilled water to customer buildings and campuses. Customers connected to these systems enjoy multiple benefits including reduced operating costs, lower emissions and unmatched reliability. CenTrio is a wholly owned subsidiary of a global Infrastructure Investment Consortium with unmatched financial wherewithal and manages a portfolio of long-life, high quality infrastructure assets with high barriers to entry that generate stable and growing cash flows. Why Join CenTrio? CenTrio offers a dynamic and friendly work environment, dedicated to nurturing a top-notch team culture! Additionally, CenTrio offers an array of fabulous benefits and perks. • Medical Benefits first day of hire, • Medical, dental, vision, Life & AD&D benefits, • Option of supplemental Life & AD&D benefits, • Company paid High Deductible Healthcare Benefit Plan, • 401k plan with % match, • Training Opportunities and career progression, • Competitive salaries that reflect the value of skills and experience, • Dynamic and friendly work environment in a rapidly expanding industry with a national presence, • Remote, Hybrid, and In Office schedules available dependent on job responsibilities, • 24-hour Employee Assistance Program/Hotline, • Corporate discounts (Travel, Entertainment, Home, Auto, Apparel, Health and Wellbeing, and other various retail options)

Job Description The Senior Technical Support Specialist serves as Kinsley Power Systems' advanced technical resource for power generation equipment, providing technical training, field support, troubleshooting, high-level repair assistance, commissioning support, and subject matter expertise for Rehlko KO-Series and "Big-Iron" (lMW and above) generators, ATS/switchgear, DPS systems, and/or large multi-unit configurations. This position works closely with Service Operations, Technical Training, Branch Management, Sales Engineering, and Rehlko factory personnel to support technician development, complex repairs, startup and commissioning activities, equipment performance investigations, and escalated customer issues. The Senior Technical Support Specialist is responsible for maintaining applicable factory certifications, delivering classroom and field training, documenting technical findings, and helping drive technical issues to successful resolution. Essential Functions and Responsibilities: • Obtain, maintain, and keep current all applicable Rehlko certifications, factory training credentials, and train-the-trainer qualifications to remain qualified to teach Rehlko equipment and support technician development., • Actively participate in the development and delivery of industrial training classes through the Kinsley Training Center in Syracuse, including classroom instruction, hands-on training, technician mentorship, and field-based training support, as needed., • Collaborate with Technical Support Coordinator/Trainer and Branch Manager to maximize technician productivity, deliver field and classroom training, conduct QC audits, and problem-solve logistical/technical/capacity/scheduling issues., • Work with Operations management on technician mentorship, to build a larger technician base with higher skill set., • Lead advanced troubleshooting for complex equipment, controls, switchgear, and commissioning issues by coordinating with Rehlko factory engineering, technical support teams, and internal stakeholders to identify root cause and corrective action., • Support completion of large-scale service and start-up assignments by working with Service, Sales Engineering, Operations, and Rehlko factory personnel to ensure technical issues are documented, communicated, and brought to closure., • Maintain accurate records of technical issues, factory communications, corrective actions, lessons learned, and final outcomes to support closure, continuous improvement, and future training best practices., • Travel to customer sites, high-level job sites, and emergency service events throughout Kinsley's service territory, for durations not to exceed 2 weeks at one time, to provide advanced technical support, field training, troubleshooting, repair oversight, commissioning assistance, and assigned service support., • Conduct engine and electrical diagnostics, troubleshooting, and repairs for Rehlko KO-Series and "Big-Iron" generators (lMW and above), ATS, paralleling, switchgear, DPS systems, and other complex or multi-unit configurations., • Perform off-site engine and alternator repairs on industrial and commercial power generation equipment, as needed., • Install, convert, and retrofit outdated equipment., • Provide switchgear service, start-ups, and upgrades (when available through Rehlko). Will be involved in the development of the Rehlko switchgear training program., • Perform preventative maintenance on power generation equipment, including oil and filter changes, as well as part replacements/repairs., • Manage service and start-up of large-scale projects from equipment commissioning., • Coordinate with Kinsley Service Department on commissioning and start-up dates for all relevant projects., • Manage and monitor execution of specified projects working with the Service Startup Coordinator to successful completion., • Collaborate with external customers (Kinsley Service-Direct) and internal customers (Kinsley Sales) on upgrading existing switchgear, from start to finish (including commissioning). (Will not be responsible for sales of the service), • Work with Kinsley AMS as a service expert on larger MVP accounts to maximize TM and upselling opportunities. (Used as technical expert not as the sales function), • Provide updates and status reports on scheduled jobs to key internal and external stakeholders., • Respond to after-hours on-call requests, both in-state and out-of-state, 24/7/365 for specified large-scale jobs or switchgear-related issues. (As an emergency contingency, not the primary point of contact) (Emergency dispatch will be planned and approved), • Promote a culture of safety, integrity, and accountability through words and actions., • Work in a safe and efficient manner, including maintaining good housekeeping and adhering to all safety policies, such as NFPA 70E, lockout/tagout, proper PPE utilization, and safe driving practices., • Practice safe operation and proper maintenance of a company vehicle., • Adhere to all Federal, State, Local and Company policies, including, but not limited to, the Kinsley Employee Handbook, OSHA regulations, and Department of Transportation (D.O.T) regulations., • Maintain an average annual billable percentage of 50% or greater, unless granted an authorized exemption., • Other duties as assigned. Education and Qualifications: • Minimum of twenty years of hands-on experience servicing generators with capacities ranging from S00kW to 2,SOOkW, including expertise in paralleling switchgear and DPS systems., • Willingness to engage in international travel and meet the requirements for obtaining security clearance., • Ability to obtain and maintain all required Rehlko certifications, train-the-trainer credentials, and continuing education requirements necessary to provide technical instruction and support across Kinsley's service organization., • Possession of an OSHA 10 or OSHA 30 certification (as per local regulations) or the ability to obtain one., • Possession and maintenance of a valid state driver's license., • Possession of a current DOT medical card, as required for towing, or the ability to obtain one., • Flexibility to work a varied schedule, including nights, weekends, and on-call hours as necessary., • Ability to work effectively in all weather conditions and diverse environments (urban and rural)., • Strong personal integrity, a high sense of urgency, and a drive for success., • Excellent customer service focus with proficient verbal communication skills., • Preferred certification from EGSA (Electrical Generating Systems Association). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. The anticipated compensation range for this position is $45.00 to $55.00 hourly. Actual compensation may vary based on skills, experience, certifications, location, and other business-related factors. Kinsley Group offers a comprehensive benefits package that may include medical, dental, and vision insurance, company-paid life insurance, disability coverage, paid time off, paid holidays, 401(k) with company match, employee assistance programs, and other company-sponsored benefits.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! We are seeking experienced Fire Alarm/Intrusion/Burglar Installation Technicians to join our growing team. This role involves installing, troubleshooting, and maintaining fire alarm systems across various commercial and retail locations nationwide. Ideal candidates will have strong technical skills, a commitment to safety, and the flexibility to travel extensively. We seek self-motivated and reliable technicians who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Wachter? • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Company vehicle provided, in some cases, after initial 2-4 weeks of employment, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package: Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings.Key Responsibilities:, • Installation, troubleshooting, and maintenance of fire alarm systems infrastructure., • Running low-voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Installing cable support structures such as j-hooks, cable racks, and innerduct., • Conducting tests to ensure all newly installed cable systems and component devices are operational., • Troubleshooting issues with cable networks and fire alarm panels., • Ensuring all installations and repairs comply with NFPA standards, including NFPA 70 and 72., • Collaborating with team members on pre-installation design and planning., • Maintaining accurate and detailed records of all work performed., • Adhering to all required project safety requirements as set forth by Wachter, our customers, or OSHA.Qualifications:, • Proven experience in field installation within security environments: Fire Alarm and/or Intrusion., • Current and valid state-required Physical Security and/or Life Safety license., • In-depth knowledge of NFPA standards, especially NFPA 70 and 72., • Experience reading blueprints and site maps., • Comfortable working at heights of 20–60 feet using lifts., • Ability to work in cramped spaces and operate BOOM or scissor lifts., • Proficiency with smartphones, computers, email, spreadsheets, and Microsoft Office., • Possession of basic PPE and reliable transportation during the initial training period., • Valid driver’s license with a clean driving record (no DUI/DWI in the last 3 years)., • Availability for extensive travel (2–6 weeks at a time) and flexible shifts including nights and on-call work.Preferred Qualifications:, • NICET Level 2 certification or State-required licenses., • Knowledge of cabling infrastructure and conduit installation., • Ability to identify independent colors and learn color codes., • Experience with multiple Intrusion and Fire system manufacturers. Join our team and earn up to a $15,000 signing bonus based on experience and licenses, plus extra pay incentives for night shifts! Wachter is a family-owned company since 1930 and we see each employee as a critical piece of the Wachter Family. With over 900 licenses across the country, Wachter serves commercial and industrial clients with the right technologies needed to keep them successful. We design, install, and maintain the technologies that keep businesses operating efficiently. Our team of dedicated electricians, engineers, and technicians provides electrical, data, security, communications, and automation services to clients in numerous industries. Follow us on Facebook, Instagram, Twitter, and LinkedIn. We're an equal opportunity employer. All applicants will be considered for employment without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Senior Manager, Manufacturing, Test & Service Engineering At Hidden Level, we’re building the future of airspace awareness through cutting-edge RF sensing technology. Our mission is to make the world safer—whether it’s protecting troops, securing infrastructure, or enabling smarter cities. We design, manufacture, and deploy advanced sensor systems that deliver real-time insights for defense and commercial applications. Position Overview: The Senior Manager, Manufacturing, Test & Service Engineering leads the engineering functions that support production, test, installation, service, and repair of Hidden Level products. This leader is accountable for the performance, capability, and continuous improvement of these functions, including ensuring the processes, tools, documentation, and technical resources required to scale effectively are in place and operating effectively. This role is accountable for the technical transition of products from development into repeatable production and for sustaining those products throughout their operational lifecycle. The Senior Manager drives manufacturing and test readiness, quality, throughput, troubleshooting, serviceability, and lifecycle support while providing both leadership and hands-on technical contribution as needed. Success requires the ability to coach teams, build scalable processes, solve complex technical problems, develop procedures and tooling, and support deployments. The Senior Manager is accountable for outcomes regardless of whether work is performed directly, delegated, or delivered cross functionally, and must retain the technical capability, judgment, and willingness to engage directly when it improves outcomes or strengthens team capability. Location: This position is located onsite in East Syracuse, NY Responsibilities: Manufacturing Engineering • Lead the Manufacturing Engineering function supporting Hidden Level hardware products from new product introduction through full-rate production., • Own manufacturing readiness and production engineering activities associated with new products, product revisions, and engineering changes., • Ensure effective development, maintenance, and continuous improvement of manufacturing processes, routings, work instructions, assembly methods, tooling, fixtures, and production test processes. Partner with Development Engineering Teams to support designed for manufacturability, assembly, testability, and serviceability., • Participate in Design for Manufacturing, Assembly, Test, and Service (DFM/DFA/DFT/DFS) reviews., • Establish manufacturing readiness criteria and ensure required documentation, tooling, equipment, software, training, and test capability are available prior to production release., • Support configuration management and Engineering Change Order implementation to ensure changes are introduced into production in a controlled manner., • Analyze production constraints, defects, test failures, and process variation and implement sustainable corrective actions., • Support capacity and production planning through analysis of labor content, equipment capacity, test capacity, takt time, cycle time, and process constraints., • Partner with Supply Chain and suppliers on manufacturing issues involving PCBAs, mechanical assemblies, components, and other critical hardware. Production Test & Tooling • Working with development engineering, own the manufacturing readiness and lifecycle management of manufacturing tooling, fixtures, test equipment, and associated technical documentation., • Develop and improve production test strategies that efficiently verify product performance while maintaining appropriate quality controls., • Ensure test stations, fixtures, and tooling are scalable, maintainable, calibrated where required, and appropriately controlled., • Identify opportunities to automate manufacturing and test processes where automation improves quality, repeatability, throughput, or traceability., • Establish standard methods for troubleshooting production failures and capturing failure information., • Work with Engineering teams to improve diagnostic capability and reduce time required to isolate manufacturing defects. Service & Depot Engineering • Establish and lead the technical processes supporting depot repair, field returns, troubleshooting, refurbishment, and product service activities., • Establish and maintain a structured service and depot triage process, including unit inspection, power on evaluation, diagnostic execution, configuration verification, and functional testing to efficiently identify and resolve known failure modes., • Establish tiered troubleshooting and escalation processes for units that cannot be resolved through initial triage., • Ensure troubleshooting guides, diagnostic procedures, repair instructions, test procedures, and service documentation are developed and maintained to enable consistent diagnosis and resolution of known issues., • Establish repair and disposition criteria for known failure modes, including repair, rework, return-to-vendor, and escalation to development engineering for evaluation, and other appropriate dispositions., • Establish standardized failure codes, repair codes, and service data collection practices to ensure recurring failure modes are identified and communicated effectively., • Drive improvements in diagnostic coverage and serviceability by translating recurring failure modes and service data into actionable feedback for Quality, Product and Engineering teams., • Own the field validation, documentation, and lifecycle management of specialized deployment/installation tools, fixtures, test equipment, and installation aids., • Define standardized deployment/installation tool kits/BOMs, including required quantities, calibration requirements, spares, consumables, packaging, and replenishment requirements., • Develop and control installation procedures, assembly instructions, torque requirements, cable/connector practices, sensor alignment methods, mounting methods, and other engineering-controlled installation requirements., • Develop and maintain configuration-controlled installation, commissioning, troubleshooting, acceptance test, tooling, and training documentation necessary to enable Hidden Level personnel and authorized third-party installers to safely and consistently deploy Hidden Level products., • Establish installer qualification requirements, technical boundaries, required installation evidence, and escalation criteria to ensure third-party installations meet Hidden Level engineering and quality standards., • Provide engineering escalation when the deployment/installation team encounters hardware, integration, installation, test, or configuration problems that cannot be resolved through standard procedures., • With Technical Support, define how as-deployed hardware configuration, serial numbers, firmware/software versions, modifications, and other configuration attributes are captured and maintained., • Support root cause investigations for significant or recurring field failures. Quality & Continuous Improvement • Partner with Quality to investigate manufacturing and field failures using structured root cause and corrective action methodologies., • Support Nonconformance, Material Review Board, Corrective Action, and Preventive Action processes as required., • Analyze manufacturing and service data to identify recurring failure modes, systemic issues, and improvement opportunities., • Drive Lean and continuous improvement initiatives across manufacturing and service engineering., • Establish standardized work and engineering controls that reduce process variation and improve repeatability., • Support Hidden Level’s ISO 9001 Quality Management System and applicable configuration, documentation, and process-control requirements., • Ensure manufacturing and service engineering processes generate appropriate objective evidence and traceability. Systems, Data & Metrics • Ensure manufacturing and service processes are appropriately represented within Hidden Level's enterprise systems and production workflows., • Partner with Operations, Supply Chain, Quality, Configuration Management, and IT on integration of engineering processes with Deltek Costpoint MRP, shop-floor execution, PLM, and related systems., • Develop dashboards and metrics that provide visibility into manufacturing and service performance., • Use operational data to prioritize engineering resources and continuous improvement activities. Leadership Responsibilities • Build, develop, and lead a high-performing Manufacturing & Service Engineering organization., • Establish clear roles, responsibilities, priorities, and technical ownership across the team., • Develop engineering standards and repeatable processes that enable Hidden Level to scale without creating unnecessary operational complexity., • Balance production support, service support, new product introduction, and longer-term process improvement priorities., • Develop staffing, tooling, equipment, and capital requirements necessary to support production and service growth., • Coach engineers and technicians in structured problem solving, root cause analysis, manufacturing engineering, and troubleshooting methodologies., • Establish strong working relationships across Operations, Engineering, Quality, Supply Chain, Configuration Management, Programs, Deployment, and Customer Service., • Serve as an escalation point for significant manufacturing and service-related technical issues. Required Qualifications: • Bachelor's degree in mechanical engineering, Electrical Engineering, Manufacturing Engineering, Industrial Engineering, Systems Engineering, or a related technical discipline., • 7+ years of experience in manufacturing engineering, hardware engineering, production engineering, service engineering, or related technical operations., • 7+ years of experience leading engineers in a manufacturing environment, • Demonstrated experience supporting the transition of complex hardware products from engineering development into production., • Experience developing manufacturing processes, work instructions, tooling, fixtures, and production test methods., • Strong troubleshooting and root cause analysis experience involving complex electromechanical or electronic systems., • Experience supporting engineering changes and configuration-controlled hardware., • Demonstrated ability to use manufacturing and service data to identify problems and drive measurable improvements., • Strong cross-functional leadership and communication skills., • Ability to operate effectively in a fast-growing environment where production systems and organizational capabilities are being developed concurrently., • Experience with radar, RF, aerospace, defense, telecommunications, or other complex electronic hardware. Preferred Qualifications: • Master's degree in systems engineering, • Experience with printed circuit board assemblies and electronics manufacturing., • Experience supporting depot repair, RMA, field service, or product lifecycle support operations., • Experience with ERP/MRP and product lifecycle management systems; Deltek Costpoint experience is beneficial., • Experience with Lean Manufacturing, Six Sigma, or structured continuous improvement methodologies., • Experience working within an ISO 9001-certified Quality Management System., • Familiarity with DoD manufacturing environments and applicable FAR/DFARS requirements., • Experience developing automated test systems, diagnostic tools, or manufacturing software., • Experience scaling manufacturing operations from low-rate production toward significantly higher production volumes. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, disability insurance, and potential stock options. Salary Range: The salary range for this position is estimated at $134,000 to $175,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, age, veteran status, disability, or any other status protected by applicable federal, state, or local law. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. Hidden Level Employees must be able to obtain and maintain a U.S. Government Security Clearance, if required for the position. Please click here to review the National Security Clearance Adjudicative Guidelines.

Job DescriptionDescription: Job Summary Feldmeier Equipment is seeking a Controls Engineer to join our Manufacturing Engineering team. This position will play a critical role in supporting, troubleshooting, and improving manufacturing equipment across our facilities. The Controls Engineer will be responsible for reverse engineering legacy equipment, including IMCAR systems, while developing and maintaining controls solutions for new and existing automated equipment. This role combines hands-on troubleshooting with engineering design and continuous improvement initiatives to support production, quality, safety, and operational efficiency. Requirements: Essential Duties and Responsibilities · Reverse engineer existing manufacturing equipment to understand, document, and improve machine functionality. · Troubleshoot electrical, controls, PLC, HMI, servo, VFD, and automation-related issues on production equipment. · Design, develop, modify, and maintain PLC and HMI programs. · Support the installation, startup, commissioning, and validation of new manufacturing equipment. · Create and maintain electrical schematics, controls documentation, wiring diagrams, and equipment manuals. · Work with Manufacturing Engineering, Maintenance, Quality, and Production teams to identify and implement process improvements. · Analyze machine performance data and recommend improvements to increase equipment reliability and efficiency. · Develop preventive maintenance recommendations and troubleshooting procedures. · Assist with integrating robotics, automation technologies, and Industry 4.0 initiatives where applicable. · Support vendors, contractors, and equipment manufacturers during installations, upgrades, and repairs. · Train maintenance technicians and production personnel on equipment operation and troubleshooting. · Ensure all equipment controls comply with safety standards and company policies. · Participate in root cause analysis and corrective action activities for equipment failures and production issues. Required Qualifications · Bachelor's degree in Electrical Engineering, Controls Engineering, Mechatronics Engineering, or related field; equivalent experience may be considered. · Minimum 3 years of experience in industrial controls engineering, automation, or manufacturing engineering. · Experience programming and troubleshooting PLC systems; Allen-Bradley experience preferred. · Experience with HMI development and industrial networking. · Strong understanding of electrical systems, sensors, motors, drives, and control circuits. · Ability to read and create electrical schematics and technical documentation. · Strong problem-solving and analytical skills. · Ability to work independently and manage multiple projects simultaneously. Preferred Qualifications · Experience reverse engineering machinery and legacy control systems. · Experience with servo systems, motion control, and automated manufacturing equipment. · Familiarity with robotics and automated welding systems. · Experience using AutoCAD Electrical or similar electrical design software. · Understanding of manufacturing processes involving stainless steel fabrication, welding, machining, rolling, or forming equipment. · Knowledge of industrial communication protocols including Ethernet/IP, Modbus, and Profinet. Physical Requirements · Ability to work in both office and manufacturing environments. · Ability to stand, walk, climb ladders, and access manufacturing equipment. · Ability to occasionally lift up to 50 pounds. · Ability to work around energized electrical and automated equipment while following all safety procedures. Key Success Measures · Reduced equipment downtime. · Improved machine reliability and production efficiency. · Successful implementation of automation and controls improvements. · Complete and accurate controls documentation. · Effective support of production and maintenance teams.

Job Description Job Type: Full-Time Monday - Friday 8hr Department: Engineering / Manufacturing Position Overview We are seeking a motivated, detail-oriented Mechanical Engineer with practical experience in mechanical design, blueprint interpretation, CAD drafting, estimating, and metal fabrication. The ideal candidate will be comfortable working from customer specifications and engineering drawings, preparing accurate bids and material estimates, and operating manufacturing equipment such as a plasma burn table. This position requires a combination of technical design skills, problem-solving ability, cost estimation, and hands-on shop experience. Key Responsibilities • Read, interpret, and work from engineering blueprints, shop drawings, and technical specifications., • Create, modify, and maintain CAD drawings, including 2D CAD drawings and mechanical layouts., • Develop and revise part drawings, fabrication drawings, and production documentation., • Prepare customer bids, job quotes, and cost estimates based on drawings, materials, labor, and manufacturing requirements., • Calculate material requirements, dimensions, quantities, and fabrication costs., • Operate and set up burn table equipment, • Prepare cutting files and ensure drawings are properly formatted for production equipment., • Work with shop personnel to ensure parts are manufactured accurately and efficiently., • Review projects for manufacturability, material usage, accuracy, and cost effectiveness., • Troubleshoot drawing, fabrication, and production issues as they arise., • Maintain organized records of drawings, quotes, job files, and revisions., • Follow all shop safety procedures and equipment operating requirements. Ideal Candidate The ideal candidate is someone who can take a project from a customer drawing or concept through the estimating and drafting process and into production. They should be comfortable working at a computer to develop drawings and quotes while also spending time on the shop floor supporting fabrication and operating equipment when needed. \nCompany Description Welding and Steel fabrication shop. We offer line boring, industrial maintenance and crane services. Welding and Steel fabrication shop. We offer line boring, industrial maintenance and crane services.

As a Territory Representative - Tennessee, KY, Alabama, your tenure, experience and overall sales maturity will allow you to better serve your customers, close larger deals, and as such be responsible for a larger target within your territory. You are also a true Boplan Ambassador and culture carrier, both externally and internally. In addition to your own individual performance, this means you will also support team members whenever possible. You will be responsible for both the development of new business as well as further developing existing relationships within your territory. Supported by Boplan’s Individual Development Program, you will use your extensive product knowledge to visit customer facilities and propose the right solution to our customers. This is a home-based position and as such, you should be willing to travel 35-45% of your time. Your territory will be in: TN, KY, AL Responsibilities • Penetrate industrial accounts and set-up relationships with Safety, Facility, Project Engineers, and Maintenance professionals (influencers and decision makers), • Visit industrial plants throughout your territory, identify problem areas and formulate solutions for your customers (solution/value selling)., • Understand the sales cycle steps for each account and guide customers through their decision making leading to close, • Evaluate industrial environments, take measurements, and translate that information into a well-substantiated pricing quote, • Maximize your relationships to get referrals and extend your network, whether within your territory or within your customers’ network, • Set-up and participate in local and potentially national trade shows, • Work with internal departments to facilitate projects from quote to installations, • Properly use and maintain information in our CRM system., • This is a pioneering position to quickly grow a defined territory and establish BOPLAN USA is the leader in the market. Qualifications • 3–5 years of outside B2B sales experience, preferably in industrial or manufacturing environments., • Proven success growing a sales territory through new business development and account expansion., • Experience managing a regional territory with frequent field travel and customer visits., • Bachelor's degree in Business, Commercial, Engineering, or a related field preferred (or equivalent professional experience)., • Strong commercial acumen with experience managing the full sales cycle, from prospecting through closing., • Mechanical or technical aptitude with the ability to understand and communicate technical product solutions., • Demonstrated ability to identify customer needs, deliver consultative sales presentations, and influence purchasing decisions., • Experience selling industrial safety, manufacturing, construction, or other industrial products is highly preferred., • Strong organizational and territory planning skills with the ability to work independently., • Willingness and ability to travel extensively within an assigned territory What we Offer • A competitive salary + Variable Compensation: $70,000-75,000 + Performance Bonus, • Monthly Car Allowance: $700, • Performance Bonus of up to: $25,000 if you meet your quarterly targets., • Health Insurance : including low deductible Medical, HSA/FSA, dental, vision and life., • 401K Program: participation in our 401(k) program, including 100% match up to 3% of your salary, starting after 60 days of employment, effective 1st day of the month., • PTO (vacation, sick and personal time), • Bereavement and Parental Leave Offered, • Professional growth - Our company plans for fast growth and as such, your proven results will give you opportunities for advancement., • The opportunity to make a difference - Our products make industrial environments safer than ever before. Our vision? Our legacy is a safer world. You will help make this happen.