Trabajos inspection en Jersey City, New Jersey - Page 8Crear alertas

Job Description JOB SUMMARY: This management position exists in several Program Divisions. Under the general supervision of the Divisional Vice President of Supportive Housing and Adult Homes is responsible for the oversight of the administrative, operational, staffing, and clinical aspects of the program. Responsible for personnel management, fiscal operations, inventory management, client services, safety and welfare of staff and clients, hiring and training of personnel, directing and coordinating the activities of the staff, and general administration of the program. ESSENTIAL JOB FUNCTIONS: To perform this job successfully, an individual must be able to perform each essential duty listed satisfactorily with or without a reasonable accommodation. Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties unless this causes undue hardship to the agency Provides Clinical Services: • Directs clinical treatment services provided to consumers, oversees the development, implementation, and review of treatment plans, • Conduct supervision with program supervisor, in accordance with agency and division policy, • Conduct CORE audits of case records to evaluate the completeness and quality of treatment plans, quarterly assessments, apartment inspections and progress notes, • Conducts staff meetings to review and discuss compliance, recreational and social activities, interagency Referrals, • Conduct High Risk meetings with Pathways to Wellness and RN, to collaborate on ways to support clients who are on the high risk list, • Conduct rent arrears review meeting with program staff and interagency departments from a clinical and client-centered perspective, • Immediately reports serious incidents, allegations of abuse, incidents, or sensitive situations and completes incident reports in accordance with agency policy, • Regularly directs meetings concerning clinical issues with clients care team, • Initiates and participates in case conferences with mental health treatment team, and inpatient psychiatric team, • Completes SPOA referrals for IMT, ACT Team, and Non- Medicaid Care Coordination, • Utilizes Mental Health Hygiene Warrant when needed, • Conduct intakes for new referrals via ICL Hope, • Provide clinical crisis intervention regarding clients and support staff, • Ensure all psychosocial assessments and all assessment necessary for client care, • Conduct clinical trainings regarding motivational interviewing, harm-reduction, person-centered care, • Conduct eviction meeting regarding court case, documentation require, coordinate and collaborate with Real Properties., • Supervise the Clinical Specialist for SIBN, provide clinical support, and training., • Establishes and maintains work schedules in accordance with agency policy and assignments of staff. Responsible for managing the completion of time clock edits of staff within the suspense established by the Human Resources Department, • Ensures staff compliance with the agency's time and attendance policy; recommends disciplinary action for those out of compliance, • Manages the completion of performance evaluations, recommends staff for the employee recognition award, • Conducts new apartment viewings, and ensures all apartments are set up with needed items. when vacating an apartment, conducts walkthroughs with landlord, • Administers disciplinary actions in accordance with agency disciplinary policy, conducts disciplinary counseling, completes disciplinary action reports, and recommends employee terminations as needed, • Reviews authorized staff positions, submits Request for Personnel (RFP), on vacant staff position(s), interviews candidates for employment in accordance with agency policy and employment law., • Ensures that staff have attended required monthly RELIAS trainings, • Manages employee accident reporting and initial submission of workers' compensation claims., • Monitors employee morale and the climate of the work environment, • Monitors employee accrual totals, approves or recommends approval of employee requests for time off, and notifies the Department of Human Resources when an employee should be placed on or taken off Family and Medical Leave (FMLA). Maintains contact with staff while out on FMLA, • Provides oversight in the area of administrative recordkeeping, maintenance of office equipment, reception of visitors, phone reception, and stocking office supplies, • Manages the orientation of new personnel, • Maintains accountability and serviceability of all ICL property assigned to the program to include vehicles, report lost stolen items, missing, or damaged property in accordance with ICL policy, • Authorizes the purchase of supplies and equipment; properly secures all property and equipment, • Conducts inspection of apartment keys and repair list, • Ensure office space is in accordance to ICL Policy, • Ensures internal program compliance with federal, state, city, and agency regulatory requirements., • Responsible for the development of a program mission statement and program goals that supports the division and agency mission statements and goals., • Coordinates with the Department of Quality Management and the departments in the Administrative Division for staff assistance in the preparation for an audit, • Reviews plans of corrective action, incident reports, and program evaluation reports and addresses areas that need improvement, • Provides oversight in submission of statistical data, • Ensure all clients rental payments are in accordance to ICL policy, processed, tracker, and ensure all logistics with the finance and entitlement department., • Approves/disapproves all purchase orders and financial requests from staff, • Manages consumer rent payments, keeps a spreadsheet of all monthly rent payments. Keeps a log of all rent arrears, and payment plans., • Promotes Mental Health and Managed Care programs in local communities; maintains liaison between local elected officials and community boards, educates citizens in the community on mental illness., • Educates staff and residents/consumers on the importance of a constructive relationship with local elected officials, community boards, and community citizens., • Cooperates with other organizations in development of understanding and interest participating in long range plans for mental health program development., • May conduct regular inspections of apartments and contacts landlords to report repairs that need to be made in accordance with rental agreements., • May be responsible for facility maintenance and reports needed repairs to the Director of Real Property Operations., • May review drafts, procedures, and job descriptions., • May be involved in hosting visitors from community, regulatory offices, and/or other agencies., • May be chairperson or member of an agency or division committee(s)., • Ability to lead a multi-disciplinary staff of professionals in providing treatment services., • Ability to manage multiple projects, delegate tasks, and check on the completion of assigned tasks., • Ability to manage resources, which includes money, material, time, and people., • Ability to work in a team model, • Positive attitude willing to think outside of the box, • Serves as a role model to staff and consumers/residents., • Strong interpersonal skills, communication, emotional intelligence, and flexibility, • Highly-developed clinical, engagement, and motivational skills;, • Experience with risk assessment and risk management;, • Track record of delivering quality treatment services to individuals with SMI, • Experience delivering treatment, rehabilitation and support services in the community;, • Proficient in computers and Electronic Health Record (EHR), • Ability to effectively hold field staff accountable and to go into the field as needed, • Willingness and ability to use ICL supplied communication tools (e.g. computers, mobile telephone, fax, etc.) regularly in the course of conducting business MINIMUM REQUIRED EDUCATION AND/OR EXPERIENCE: • NYS Licensure in a recognized mental health profession (LMSW or LMHC), • Bilingual in Spanish #ICLOTHER

Job Description Job Description QA Inspector (Warehouse & Production) Secaucus, NJ | Full-Time | On-site About the Role We are seeking a dependable and detail-oriented QA Inspector to support quality assurance operations at our Secaucus, NJ facility. This role is responsible for ensuring that inbound materials, inventory, in-process production, and finished goods consistently meet customer specifications and internal quality standards. The ideal candidate is highly organized, confident in decision-making, and comfortable documenting and communicating quality findings in real time. Key Responsibilities • Ensure all inventory assigned to projects is accurately received and verified according to lot codes, expiration dates, and quantity, and is properly labeled, stored, and maintained to guarantee production readiness at all times, • Maintain a strong understanding of customer requirements, specifications, and quality expectations, ensuring they are clearly communicated and consistently executed on the production floor, • Oversee and enforce high-quality standards across all production lines by confirming workflows are organized, processes are followed, and outputs meet defined quality benchmarks with consistency and precision, • Conduct quality inspections on inbound materials for each project and review palletized products for quantity, condition, and compliance before release to production, • Approve or reject materials and finished goods based on customer and internal standards, including applicable military specifications when required, • Perform ongoing quality checks on in-process and finished goods, identifying defects, variances, or non-conformities and ensuring corrective actions are implemented promptly, • Provide real-time quality communication with the Global Team to resolve issues quickly, prevent rework, and protect customer satisfaction, including:, • End-of-shift visual summaries, • Weekly quality reviews with visual evidence, • Video recording of random quality checks, • Photographic documentation of final kits, • Reinforce quality expectations through tools and resources (guides, checklists, and visual standards) so production teams can self-check and remain aligned, • Document defects thoroughly, including close-up photos and detailed notes, • Support continuous improvement initiatives by identifying process gaps, quality risks, and efficiency opportunities aligned with PGS360’s commitment to precision and reliability, • Create clear visual and written documentation (photos, videos, notes) to support quality records and investigations, • Conduct routine audits of production line practices to confirm compliance with customer requests, work instructions, and quality standards Qualifications • Previous experience in Quality Assurance, Quality Control, Warehouse Inspection, or Production Inspection strongly preferred, • Strong attention to detail and ability to make accurate approval/rejection decisions, • Comfortable using a phone/tablet/camera for photo and video documentation, • Ability to stay organized while working across multiple production lines and projects, • Ability to lift up to 50 lbs and work on your feet for extended periods, • Strong communication skills (must be able to clearly report issues and follow-up actions), • Bilingual (English/Spanish) strongly preferred What We Offer • Competitive hourly pay, • Consistent full-time schedule, • Growth opportunities within warehouse and quality operations, • Supportive, team-driven environment Schedule Monday–Friday Occasional overtime may be required based on business needs Work Location Secaucus, NJ (On-site) Apply today to join a team focused on quality, precision, and reliability. We are a quality-driven brand servicing niche industries such as CPG and Nutritional. Company DescriptionWe are a quality-driven brand servicing niche industries such as CPG and NutritionalWe are a quality-driven brand servicing niche industries such as CPG and Nutritional

Job Description Job descriptions Title: Automotive TechnicianJob Type: Full-time SummaryS & A Auto Repair LLC is seeking an experienced Automotive Technician. This person will be responsible for the maintenance and repair of the cars. The Auto Technician performs a full range of duties, including but not limited to the installation, repair, maintenance, and inspection of mechanical and electrical systems. JOB DUTIES • Performs related work as assigned, completing tasks in an efficient, timely, and professional manner, • Communicates with management and the mechanical team about any preventive issues or future potential complications observed, • Ability to work safely, adhering to the company policies, • Maintains the area of work clean, • Maintains, installs, services, parts such as Engines, Transmissions, Starters, air compressors, brakes, air conditioners, mufflers, Tune-ups, alternators, radiators, Differentials, Struts & shocks, ABS Systems, and other parts, • Replaces fuses, light bulbs, electric switches, circuit breakers, fans, and other electrical parts., • Experienced and knowledgeable in various hand and power tools and their applications. Ensures their proper use, care, and storage, • Work closely with other employees to motivate, train, and develop team skills JOB QUALIFICATIONS • Strong work ethic, ability to work and problem solve independently, • Driver's license (Required), • Knowledge of the accepted practices, processes, materials, and tools of maintenance trades., • Knowledge of the proper use of the scan tools, diagnostic tools, heater machines, lifts, A/C machines and any other equipment found in the facility., • Knowledge of the proper use of chemicals in the facility, • Must have the hand and power tools to properly perform the job required and have the ability to adhere to the updates in new cars., • Ability to do routine mechanical and electrical maintenance and care for tools and equipment, • The job duties require an employee to bend, reach, kneel, and stand for extended periods, • Must be bilingual, English and Spanish or English and Portuguese Experience: • 5 years of experience in mechanical auto repairs, testing/ diagnostics., • Professional experience in Engine, Transmission, Exhaust, Electrical maintenance, suspension and power, Brake system, Cooling System, Fluid, and Battery., • High school diploma

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement Are you an experienced health and safety leader passionate about creating a safe and healthy workplace? As the Site Safety Manager , you will oversee occupational health and safety programs, analyze trends and ensure compliance with regulations to safeguard one project site in midtown Manhattan. Your role involves providing technical expertise, conducting safety orientations and reviewing safety proceduress . Collaborate with industry experts and committed teams to promote a safe working environment. The project will be a first-of-its-kind job and education center in the heart of New York City, transforming a college campus into a state-of-the-art life sciences, healthcare, and public health hub, and bringing public realm improvements. How You Will Make An Impact • Oversees safety program and procedures for one or more project sites within the same District., • Performs project site trend analysis and ensures accurate tracking of accidents, injuries, fire, property damage and other safety related incidents are recorded., • Develops and conducts all safety orientations, trainings and oversees project site toolbox talks for all project staff within designated timeframe., • Ensures all required project permits and certifications are active, documented and tracked for all required construction activities to avoid delays in construction schedule., • Provides technical expertise to training, equipment needs and inspection requirements to support construction schedule and promote project cost savings., • Oversees equipment maintenance and procurement for project needs to ensure onsite crews have all necessary safety items before construction activity begins., • Provides project status and trend analysis to manager and project team, as needed., • Oversees injury reporting and resolution for entire project site. Reviews investigation documentation and corrective action plans to ensure appropriate mitigation strategies are implemented on the job site., • Reviews and approves Daily Hazard Analysis (DHA) from direct reports and personal daily documentation to ensure accurate and timely tracking of safety procedures. Participates in Jobsite Hazard Analysis (JHA) discussions and documentation for the entire project plan., • Creates, reviews or approves the worksite safety and evacuation plan for the project site. Supports emergency response and vehicle access planning with Project Manager .Who You Are, • Bachelors Degree in Health & Safety or a related field preferred., • Demolition and ground up experience, • 5+ years experience in construction or safety required., • Experience managing construction or safety teams required., • Developed skills identifying and mentoring direct report safety professionals. Assigning tasks and training to build a strong and well balanced internal team., • Able to provide training and learning opportunities for construction teams based on expert safety knowledge and standard safety principles., • Proven skill to identify onsite project safety risks and develop innovative and compliant mitigation strategies within safety program and agency requirement standards., • Expert knowledge of construction site equipment, methods and processes., • Strong verbal, written and presentation skills with all levels of the organization .Why Join Our Team Some of the benefits you may be eligible for as an employee are:, • Comprehensive compensation package and paid time off program, • 401k, • Medical/Extended Health Care, Dental, Vision and/or Provincial Medical, • Wellness benefits & Employee Assistance Program

Job Description Savin Engineers is seeking Electrical Inspector for large construction projects (projects ranging form $500K to 3 plus mil) at NY, NJ Path. • Must have working knowledge of lighting systems, 5KV systems, medium voltage, electrical substation work, high tension work, and other electrical based systems., • Ability to communicate efffectively both orally and written., • Ability to read plans and specs and prepare written contract administrative documentation such as daily material and inspection reports., • Identify potential work issues and keep Resident Engineer informed of any potential inssues., • Must have experience with LARGE construction projects. Requirements: • Bachelor's Degree Electrical Engineer or related contruction field., • Minimum 10-years expereince inspecting electrical construction work., • Ability to pass a SWAC Background Check., • Valid Drivers License., • Ablity to work weekends if necessary., • OSHA 30 will be required., • NICET Certifications a plus. Company DescriptionSavin Engineers, P.C. is a well-established, mid-size engineering firm headquartered in Westchester County, NY with offices in Pleasantville, NY, Rochester, NY, Bridgewater, NJ and Washington DC. Savin Engineers is always looking for talented and motivated individuals to join our team. We are a growing and vibrant multi-disciplined engineering consulting firm with six divisions united under one roof. Our MEP Division (high performance, low energy solutions) is reinforced by our Transportation Division (roads, tunnels, bridges, railways and airports), our Structural Division (structural solutions and structures of dependable performance); our Environmental Division (systems to safeguard our water), our Field Services Division (technology to detect subterranean system failures), and our Educational (turnkey assistance from concept to close out) and Facilities Management (infrastructure and building operation analysis) Division. We offer exciting opportunities to build careers in any of our multiple office locations. Whether it’s planning, design, field inspection or construction administration – any area of the company you may be involved in is staffed with a diverse group of highly-educated, qualified mentors working on a wide range of interesting assignments. We offer a competitive benefit and compensation package. Savin Engineers is an Equal Opportunity EmployerSavin Engineers, P.C. is a well-established, mid-size engineering firm headquartered in Westchester County, NY with offices in Pleasantville, NY, Rochester, NY, Bridgewater, NJ and Washington DC. Savin Engineers is always looking for talented and motivated individuals to join our team. We are a growing and vibrant multi-disciplined engineering consulting firm with six divisions united under one roof. Our MEP Division (high performance, low energy solutions) is reinforced by our Transportation Division (roads, tunnels, bridges, railways and airports), our Structural Division (structural solutions and structures of dependable performance); our Environmental Division (systems to safeguard our water), our Field Services Division (technology to detect subterranean system failures), and our Educational (turnkey assistance from concept to close out) and Facilities Management (infrastructure and building operation analysis) Division. We offer exciting opportunities to build careers in any of our multiple office locations. Whether it’s planning, design, field inspection or construction administration – any area of the company you may be involved in is staffed with a diverse group of highly-educated, qualified mentors working on a wide range of interesting assignments.\r\n\r\nWe offer a competitive benefit and compensation package. \r\nSavin Engineers is an Equal Opportunity Employer

Job Description Who We Are: CAMBA is a community of staff, volunteers, clients, donors, neighbors and partners who work together to build an inclusive New York City, where all children and adults have access to the resources and supports, they need to thrive. We take a comprehensive approach by offering more than 180 integrated programs in: Education & Youth Development, Family Support, Job Training & Employment Support Services, Health, Housing, and Legal Services. We reach almost 80,000 individuals and families, including almost 13,000 youth. CAMBA serves a diverse cross section of New Yorkers from new mothers in Brownsville to job seekers in the Rockaways. More than half of our clients are immigrants and refugees from around the globe. Over 85% of our families are living in poverty, reflecting the challenges faced by nearly 1.7 million New Yorkers today. Program Description Homelessness Prevention Initiative (HomeBase) is a CAMBA program that provides case management and essential services to 4,000 at-risk individuals and families in Brooklyn and Staten Island to prevent homelessness. Individuals and families receive services that help them overcome problems with public benefits, housing, education, health care and other issues that could impede their ability to maintain stable households. Position: Maintenance Worker Reports To: Vice-President Location: 1117 Eastern Parkway, Brooklyn, NY 11213 What The Maintenance Worker Does: The person filling this position is expected, under close supervision, to: (1) operate a variety of company vehicles to transport passengers such as clients, employees, and/or supplies and materials; (2) Clean rooms, hallways, lobbies, lounges, rest rooms, corridors, elevators, stairways, common areas and other work areas; (3) sweep, vacuum, scrub, mop, wax, polish and/or buff floors; (4) make repairs, paint, and perform various tasks to maintain the organization's physical facilities; (5) load, unload, and carry furniture and supplies up stairs and move furniture and supplies as needed; (6) clean exterior grounds, sidewalks and dumpster; (7) fulfill courier/messenger tasks in addition to maintenance tasks; including the following: • Maintain professional relationships with clients and client confidentiality., • Practice Universal Precautions/Standard Protocol & Procedures., • Comply with any and all Federal, State, City and CAMBA security and privacy polices intended to protect the security and privacy of individually identifiable health information., • Identify and report all maintenance issues., • Comply with all maintenance regulatory requirements at all times., • Utilize appropriate safety standards and display safety signs when performing tasks., • Clean rugs, carpets, upholstered furniture, window blinds, and draperies., • Clean and sanitize toilets, sinks, tubs, showers, shower fixtures, including walls, floors, curtains, stalls, and mirrors., • Replace light bulbs, light fixtures, light covers, electrical outlet covers and ballasts as needed., • Dust and/or wipe furniture, equipment, and ceiling fans., • Separate and transport trash, recyclables and waste to disposal area and consolidate for pickup., • Remove snow and/or ice from the sidewalks, driveways and stairs., • Polish metalwork, including lighting fixtures., • Replenish bathroom supplies including toilet tissue, paper towels, and hand soap., • Wash walls, ceiling, woodwork, windows, sills and door panels, heating and cooling vents and air conditioner filters., • Plaster and paint interiors of buildings., • Replace door handles or locks as needed., • Perform daily pre-trip vehicle inspection prior to first trip of the day., • Immediately report vehicle and/or equipment that are inoperable, missing or improperly utilized., • Complete vehicle travel log for all trips., • Assist passengers needing assistance in order to enter and/or exit vehicle., • Keep vehicle clean and/or free of litter at all times., • May remove graffiti from interior and exterior surfaces., • May replace cracked or missing floor tiles, wall tiles and ceiling tiles as necessary., • May cut and trim grass., • May make minor plumbing and electrical repairs., • May escort clients to appointments., • Tasks may be modified, expanded and/or assigned over time. Minimum Education/Experience Required: • Sufficient education and technical expertise: to comprehend written and oral instructions (work orders); to accomplish maintenance tasks; and to document accomplished tasks. OTHER REQUIREMENTS • Must have Valid New York State Driver’s License and excellent driving history., • Must complete NYS Approved Defensive Driving Classes every 3 years., • Must take Refresher Computerized Defensive Driver class, • Must remain insurable based on CAMBA’s point system throughout the duration of employment., • If required to drive 15 passenger van, must score at least 80% on computerized 15 passenger van improvement test every year., • If required to drive 15 passenger van, must pass an observed Van Road Test, • Acknowledge review of CAMBA’s Transportation Policy Compensation: $38,000 - $39,640 annually When salary ranges are listed, the range would represent the low and high end for the applicable position & program. The salary offered would be based on various factors unique to each program and candidate. This includes but is not limited to experience, education, budget and/or program size, internal equity, skills and other factors that may be required for the position and organization. Status: Full-time (35 hours per week) Benefits: CAMBA offers a comprehensive benefits package including health insurance, dental insurance, 403(b) retirement plan with employer match, paid time off (vacation, personal, and sick time), and paid holidays. CAMBA is an Equal Opportunity Employer. We value a diverse workforce and inclusive workplace. People of color, people with disabilities, and lesbian, gay, bisexual, and transgender people are encouraged to apply. We consider all applicants without regard to race, color, religion, creed, gender, gender identity, gender expression, national origin, age, disability, socio-economic status, marital or veteran status, pregnancy status or sexual orientation. Powered by JazzHR qkc7TbJU9K

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for an experienced Quality Manager to establish and scale our Quality Management System (QMS). Your efforts will directly contribute to the organization's success by ensuring that the complex systems we build meet the highest standards of reliability and performance. This role requires a speed & execution mindset coupled with attention to detail.Key Responsibility Areas: • Develop, implement, and manage the company’s Quality Management System (QMS) compliant with relevant ISO standards, • Oversee supplier quality, incoming inspection and in process validation for critical hardware components, • Manage and develop company policies, programs, and procedures for non-conformance, corrective actions, and anomaly investigations, • Work with the Company’s leadership and technical teams to integrate quality checkpoints into the engineering design and manufacturing lifecycle, • Work with the technical teams to ensure proper quality measures are instituted for both hardware and software, • Lead internal audits and facilitate continuous improvement initiatives across cross-functional teamsIdeal Experience & Skillsets:, • 10+ years of relevant work experience in Quality Assurance / Quality Control within aerospace, automotive, or energy sectors, • Past leadership positions and experience managing and growing Quality organizations, • Deep knowledge of ISO 9001, AS9100, NQA-1 or other relevant quality standards, • OSHA 30hr Certification and a strong safety focus, • Excellent oral, written, and interpersonal communication skills, • Ability to work across cross-functional teams to support quality challenges, • Strong ethics and discretionCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionPosition overview The Metrology Specialist – Metrology Systems Sales is responsible for driving sales growth of advanced metrology systems across New England and New York, with a primary focus on managing and supporting distributor partners and key end‑user accounts. The role is mid‑level, owning a defined territory and full sales cycle for capital metrology solutions including vision systems, optical comparators, and force/material testing systems. Key responsibilities • Achieve territory order and revenue targets for all metrology systems by executing a structured territory plan covering New England and New York., • Develop, manage, and support authorized distributor partners through joint sales calls, training, opportunity reviews, and structured growth plans., • Identify, qualify, and close new business at end‑user accounts in medical device, aerospace, automotive, job shops, and general manufacturing., • Plan and conduct onsite and virtual product demonstrations, presentations, and technical discussions to align metrology solutions with customer quality and production requirements., • Coordinate applications studies, sample measurements, and pre‑sale evaluations with internal applications and product specialists to validate solutions and support proposals., • Maintain an accurate pipeline, forecast, and account plans in the company CRM, providing regular territory updates and competitive feedback to sales leadership., • Represent the company at regional trade shows, distributor open houses, and industry events to generate leads and strengthen brand presence in precision metrology.Required qualifications and experience, • 3–7 years of successful B2B technical or capital equipment sales experience, preferably in metrology, precision measurement, or related industrial automation., • Working knowledge of dimensional inspection practices, including experience with vision systems, optical comparators, CMMs, force/material testing, or similar measurement technologies., • Ability to read engineering drawings and interpret GD&T, and to communicate credibly with quality, manufacturing, and engineering stakeholders., • Proven experience working through and with distributors or manufacturer’s reps, including joint account planning and opportunity management.Skills and attributes, • Strong territory planning, organization, and time‑management skills, with high personal accountability for results., • Consultative selling style with solid questioning, discovery, and value‑based closing skills in multi‑stakeholder environments., • Excellent verbal and written communication skills, including delivering technical presentations and training to distributor sales teams and customers., • Comfortable working remotely in the field with frequent regional travel (up to ~60–70%) across New England and New York.Reporting and location, • Reports directly to the Director of Sales – Metrology Systems, who leads North American sales for vision systems, optical measuring projectors, and force measurement systems. tlGHTqUI9M

Job Description Associate 3+ (Engineer for Building Envelope Group) Salary Range:$120,000.00 To $195,000.00 Annually About the job: We are seeking an intermediate to senior-level professional engineer to join our Building Envelope team in either Chicago or New York City. The ideal candidate has boundless curiosity (enjoys asking why things are done the way they are), a passion for delivering high-caliber work, and an enthusiasm for general building design. Energy and circularity will be transforming the way building envelopes are manufactured, designed, and constructed over the next decade.This is your opportunity to be a part of a team that will learn, teach, test, and deliver the next generation of building envelope designs, repairs, reuse, and investigative solutions. Key Responsibilities • Conduct thorough on-site inspections to assess damage, failures, or defects., • Collect and analyze data related to environmental, material fabrication, and construction practices., • Apply engineering first principles and analytical methods to determine root causes of building envelope problems, including the root causes of air infiltration, water infiltration, condensation, thermal radiation, and solar radiation., • Develop recommendations for the repair or retrofit of envelope structural components based on forensic findings., • Prepare detailed engineering reports documenting observations, analyses, findings, and recommendations as the lead or as part of a team when needed., • Support expert witness projects, as needed. Prepare and participate in depositions, as required., • Manage and oversee projects, ensuring deadlines and budget constraints are met., • Stay abreast of advancements in building envelope systems, energy codes, materials science, and forensic analysis., • Experience with terra cotta, brick, or stone masonry systems – or Experience with a variety of window wall, curtainwall, skylight, and storefront systems. Experience with both is an asset., • Explore markets in an area of your expertise and assist in business development activities toward meeting new technical peers and potential clients., • Proactively participate in professional development and thought leadership activities., • Education: Bachelor’s degree (BS) in Civil Engineering, Architectural Engineering, or Structural Engineering required; an Advanced degree (MS / PhD) is an asset., • Experience: 5-10+ years of project experience in building envelope design, repair, and investigation., • Licensure: Professional licensure is a requirement, either Professional Engineer (PE) in the State of New York or Structural Engineer (SE) in the State of Illinois (or the ability to attain one within six months of hire), with both licenses an asset., • Certifications (For NY candidates only): Qualified Exterior Wall Inspector (QEWI) designation from New York City Department of Buildings or ability to obtain QEWI within 6 months of start. Experience with NYC Local Law 11 Facade Inspection Safety Program., • Certifications (For IL candidates only): City of Chicago scaffold safety training certification or ability to obtain within 6 months of start., • Communication Skills: Excellent written and verbal communication skills. (Be willing to provide examples within the interview process), • Analytical Skills: Strong background in first principles of structural engineering and mechanics. Proficient with engineering tools for structural evaluation and analysis., • Project Management: Experience managing budgets and schedules, and leading projects., • Business Development: Experience with client engagement and presenting technical issues to Clients. Experience assisting with proposal writing. Physical and Travel Demands • Position may require some work to be completed in a field or laboratory environment, including work from heights or in confined spaces., • Enjoy up to 30% of the time in the field on assessments of building envelopes or structural system existing conditions., • Up to 20% travel may be required at times for this position. Who we are: We are CTLGroup, a team of engineers, architects, scientists, and consultants who are seasoned technical experts possessing unparalleled experience, knowledge, and testing proficiency in structures and materials. Our integrated team is backed by one of the most sophisticated commercial structural and building materials laboratories in the United States. Whether providing technical consultation, conducting laboratory studies, performing failure investigations, or offering expert testimony, we aim to solve our clients' problems and assist in achieving their objectives. Beyond delivering mere data, our team provides a foundation of confidence upon which our clients can build. *This job description describes the general nature of the position. The above declarations are not intended to be a complete list of responsibilities, skills and abilities required to do the job.CTLGroup provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Why J.McLaughlin? J.McLaughlin was founded in 1977 by brothers Kevin and Jay McLaughlin with a mission to create an American Sportswear brand that offered two key components: classic clothing with current relevance and a retail environment that has a neighborhood feel. The J.McLaughlin brand has always been more about style than fashion: straightforward, unpretentious, and devoid of the superfluous. Our clothing is rooted in the tradition of sport, work, and play. With over 180 retail locations, each store is entirely unique, attentively designed to reflect the town's color, character, and architecture. This attention to detail extends to exemplary customer service and local philanthropic engagement. Our “Culture of Kindness” creates an environment with respect, politeness, consideration, and empathy that creates a family like atmosphere and focuses on giving back to the community. The company has an entrepreneurial spirit which fosters great experience and career opportunities, complemented with our great incentive benefits programs. Overview The Construction Project Manager is motivated, proactive, organized, self-starter to manage construction projects, including new stores, relocations and renovations, from planning to completion. The Construction Project Manager will manage internal resources, teams, vendors, general contractors, sub-contractors, and associated trades as needed. The role will coordinate bids, manage budgets, and negotiate with vendors. The Construction Project Manager will manage internal and external schedules on a weekly basis and communicate the timeline to senior management. The ideal candidate will have retail design and construction experience and the enthusiasm to work in a fast-paced environment. The candidate must have the ability to recognize inefficiencies and implement improvements. About the role Essential Functions: • Oversee and manage construction projects, including new stores, relocations, and renovations from planning to completion, • Coordinate bids, manage budgets, and negotiate with vendors., • Manage construction timelines from planning to completion and coordinate owner supplied items arrive on schedule., • Manage internal resources, teams, vendors, general contractors, sub-contractors and associated trades as needed., • Communicate and update senior management on current and upcoming construction projects, • Must be able to run multiple projects while working in a fast-paced environment, • Request and evaluate site surveys as required, • Communicate with landlords as required, • Review and coordinate construction documents, • Build relationships and communicate with architects, engineers and general contractors as required, • Review leases as required, • Oversee the construction project from lease negotiation through Certificate of Occupancy, punch list completion, and project closeout including TIA allowance submissions, • Establish and monitor construction schedules for projects and ensure deadlines are met, • Create, monitor, and report on budgets for respective projects, • Review and qualify bids to ensure that projects come in under budget, • Review and timely process invoices in associated with projects, • Ability to coordinate and communicate effectively across all departments as required, • Order construction materials for the projects and coordinate shipments and deliveries as required, • Assist the maintenance team in cross functional projects as required, • Effective communication, collaboration and expectation management with internal and external stakeholders, • Attention to detail and the ability to manage multiple projects and tasks., • Ability to read and process construction documents (blueprints, sketches, contracts, change orders, etc.), • Time management skills and the ability to prioritize, meet deadlines and manage fast-track projects., • Effectively communicate with landlords/developers, architects, contractors, equipment and material vendors, inspection officials, etc., • Ability to travel to project sites throughout a large geographic region of the U.S. (up to 30%), • Computer proficiency with Microsoft Office applications and construction related project management and scheduling software., • Capable of functioning out of remote project site locations, • Ideal candidates possess hands on experience and knowledge, • Bachelor’s degree in related field or similar, • Fluent in Cantonese and English is a plus

Job Description HiFyve is hiring a CNC Cylindrical Grinding Operator / Machinist in the Manufacturing industry in Queens, NY! Pay: $20 – $35/hour (depending on experience) Shift: 2nd Shift (must train on 1st shift for several months) Location: Queens, NY Benefits: Full benefits package About the Role We’re looking for an experienced CNC Cylindrical Grinding Operator / Machinist to produce precision shafts, gear blanks, and assemblies for aerospace and defense applications. This hands-on role involves operating, setting up, and maintaining grinding equipment to achieve tight tolerances and exceptional surface finishes. Key Responsibilities • Operate cylindrical grinding machines to manufacture precision components, • Set up machines, dress wheels, and calibrate equipment to meet exacting tolerances, • Inspect finished parts using micrometers, gauge blocks, and other precision tools, • Maintain documentation of inspection results and address deviations promptly, • Perform routine maintenance, wheel changes, and coolant system checks, • Monitor machine performance, track hours, and support quality root-cause analysis, • Adhere to AS9100 quality standards and support continuous improvement initiatives, • Prior experience in cylindrical grinding, ideally in aerospace or hardened shaft applications, • Strong understanding of precision tolerances (± .0002”) and blueprint interpretation, • Willing to train on 1st shift and transition to 2nd shift; detail-oriented and quality-focused If you're interested, please apply!

Job Description Firm looking for qualified MBE/WBE/SDVOB subconsultants to join our team in providing eligible candidates for work in the Port District. Concrete field/asphalt plant inspector Experience/Certification Level required: • ACI Concrete Field Testing Technician – Grade I, • NJSAT Asphalt Plant Level 1 & 2, • Radiation Safety-Nuclear Density Gauge Certified, • Efficient in the Marshall Method – ASTM C6926 - Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus, • Perform AASHTO Resource Annual Accreditation equipment calibrations., • Efficient in preparing samples for ASTM C4867 - Standard Test Method for Effect of Moisture on Asphalt Mixtures, • Able to cut asphalt cores and prepare for bulk specific gravity of in place densities in accordance with ASTM D2726 - Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive, • OSHA 10, • OSHA 30 Concrete field inspector/lab technician Experience/Certification Level required: • ACI Concrete Strength Testing Technician, • ACI Concrete Field Testing Technician – Grade I, • ACI Aggregate Base Testing Technician, • NJSAT HMA Construction Technologist, • Knowledge of AASHTO Resource Annual Accreditation for equipment calibration., • AASHTO Resource CCRL- Rebar measurements., • Knowledge of Portland cement testing, • Efficient in performing ASTM C1202 - Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration., • Efficient in performing ASTM C215 - Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens, • Efficient in performing ASTM C666 - Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, • Efficient in performing ASTM C157 - Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, • OSHA 10, • OSHA 30

Job Description Overview Now Hiring! Analog Electrical Engineer Location: Albany, NY 12205 Schedule: Full Time Job Summary: Vitrek is currently looking for an experienced Senior Analog Electrical Engineer to join our growing team of Software and Electrical engineers.This position is for a Full-Time Engineer charged with leading system design at our engineering center of excellence located in Albany, NY. You would be part of a team of engineers designing the next generation of products as well as maintaining the existing product line.You would report to the Vice President of Engineering.What's in it for You: • Medical, Dental, Vision Benefits, • Competitive Base Compensation, • Accrued PTO Plan, • Career advancement opportunities in an expanding companyWhat You’ll Need:, • BS/MS EE from an ABET-accredited university, • 5+ years of relevant experience in analog design, • Proof of eligibility to legally work within the United States, • Domestic and International travel may be required. The travel requirement is currently estimated to be less than 10%.Nice to Have:, • Switching Inverters intended for smaller devices with a power of less than 50W, • Low and ultra-low noise analog amplifiers using both op amps and discrete transistors, • Audio amplifiers, • Analog filters using active components, • RF circuit design and testing What You’ll Do: • Digital, mixed signal, and analog circuit design including component selection, SPICE simulation, schematic/layout/BOM, and debugging. The primary skill focus will be mixed signal and analog design, • Circuit Performance testing, focusing on noise performance and stability, • Legacy and Production Support, • Application Support

Job Description Position Summary: The Engineering Director – Product Engineering position oversees project management and addresses supply and design-related matters for the released portfolio of company products. The company device is a medical system integrating multiple engineering disciplines, utilizing both capital equipment and disposable components to support liver transplants and improve organ availability. Responsibilities include developing new features within the lifecycle management of the current product range. This role involves leading cross-functional teams to identify issues, develop corrective action plans, and implement solutions related to both technical product matters and broader product development challenges. This position requires interaction with upper management for project reporting and phase reviews. The role encompasses experience with various therapies, products, and operational considerations connected to patient care and business objectives. Major Responsibilities: As the leader of a small multi-disciplinary Product Engineering team, and under the direction of the SVP, Product Engineering, the successful incumbent will drive activities in the following areas: • Lead cross-functional team members to ensure clear communication and coordination of project/program objectives, deliverables, and timing of key milestones., • Orient quickly to understand new quality issues based on field or factory performance, and to concurrently manage multiple projects with different teams and while balancing competing priorities., • May take direct responsibility for design-related CAPAs (Corrective and Preventive Action) within the Product Engineering department as well as process focused CAPAs., • Author investigation (i.e., root cause analysis) plans, reports, and supporting documents of high quality (i.e., submission and audit/inspection ready) that are technically sounds, critically reasoned, and use appropriate root cause tools/methodologies (e.g., 5-Whys/Cause Map, Contradiction Matrix, other DRM/Six Sigma problem-solving and statistical analyses)., • Provide clear and concise communication – both written and verbal., • Author strong documentation with attention-to-detail that is audit-ready., • Present team's investigation findings and action recommendations to quality (e.g., CAPA Board) and other management/business stakeholders., • Plan schedule and resources (e.g., labor skills sets and duration, expenses) to achieve desired project outcomes., • Responsible for maintaining a focus on quality, while effectively partnering with Quality, R&D, Operations, and Regulatory stakeholders to facilitate consensus, resolve disagreements, and ensure sound decision-making., • Experience in the medical device or highly regulated industry., • Experience or technical education in software development, software or computer engineering, and/or software quality assurance, including knowledge of IEC 62304 (Medical device software – software life cycle processes)., • Experience with medical device systems that include software applications and/or embedded software (i.e., firmware)., • Experience leading a complex project/program, including cross-functional team leadership, risk-based decision making, financial accountability, and ability to manage change implementation., • Background with CAPA (Corrective and Preventive Action) process, and/or experience with the use of root cause investigation, problem-solving, or similar structured methodologies and tools (e.g., 5-Whys, Fishbone, etc.), • Experience participating in or supporting audits or external inspections (e.g., FDA, TUV, internal audit)., • Proven experience in achieving results through influence management and motivating teams., • Knowledge and/or experience with product development processes and/or QMS (Quality Management System) Design Control procedures., • Strong understanding of global regulatory requirements for medical devices, including FDA regulations (e.g., 21CFR Part 820), ISO 13485, Medical Device Directive, and European Medical Device Regulation., • Requires a bachelor's degree in engineering and a minimum of 5 years of relevant experience, or an advanced degree with a minimum of 3 years of relevant experience., • Certified practitioner in Design for Reliability and Manufacturability (DRM), Design for Six Sigma (DFSS), or Lean Sigma methodologies., • Ability to travel 15%

Job DescriptionBe Part of a Team That Truly Makes a Difference At Surgical Solutions, a healthcare solutions company specializing in mission-critical support for hospital operating rooms and sterile processing departments, we’re driven by a simple but powerful mission: to improve the lives of the patients and healthcare teams we serve. Joining us means more than just a job — it’s about being part of a supportive, innovative culture where your work matters. Here, you’ll grow, collaborate, and help create better outcomes every day. If you’re looking for a place that values your passion and purpose, Surgical Solutions is ready for you. Duties & Responsibilities Operating Room Support * Set a high standard of performance for staff and peers. * Understand surgical procedures and anticipate the needs of staff and surgeons to ensure exceptional service. * Pre-Operative Setup: * Confirm all video and surgical equipment is fully functional. * Arrange monitors and equipment according to surgeon preferences. * Intra-Operative Support: * Verify proper connection and operation of all necessary equipment. * Address supply needs promptly and assist OR staff as requested. * Post-Operative Turnover: * Collect and inventory instruments and equipment for cleaning and sterilization. Instrument and Equipment Management * Maintain strict standards for decontamination, inspection, assembly, wrapping, and sterilization of surgical instruments. * Ensure no instruments remain at shift end. * Manage laparoscopic equipment, including routine maintenance and coordinating repairs. * Keep surgeon preference cards current and accurate. Professional Conduct and Availability * Provide consistent, high-quality service while fostering professional relationships with OR staff. * Demonstrate punctuality and flexibility; available for on-call and rotational shifts including weekdays, weekends, and holidays. Technology Utilization * Learn and effectively utilize all required technologies per company policy. * Use company devices to access systems such as ADP, Outlook, Concur, Slack, and SCMP as needed. Other Responsibilities * Support team and hospital operations by performing additional duties as assigned. * Manage company property responsibly; loss or damage may result in repayment. Skills & Abilities * Reliable with consistent on-site attendance; able to work any day Sunday–Saturday including 24/7 rotational coverage. * Capable of working under high-stress conditions and making critical decisions in emergencies. * Build positive relationships with clients and colleagues while maintaining professionalism. * Thrive both independently and as a team player with respect and consideration for others. * Adapt quickly to a fast-paced hospital environment involving exposure to bloodborne pathogens, chemical disinfectants, and infectious materials. Physical Demands * Perform tasks involving bending, squatting, kneeling, crawling, and maneuvering heavy equipment. * Stand for extended periods and lift or carry items weighing up to 50 pounds (or more with assistance). * Meet vision and hearing requirements, including color recognition, essential for job duties. * Wear personal protective equipment (PPE) such as gloves, gowns, and eye protection as required. Qualifications Education * High school diploma or GED required. Certifications * Certified Registered Central Sterile Technician (CRCST) or Certified Surgical Technician preferred. * CRCST must be obtained within 120 days of hire (some accounts may require this upon hire). Experience * Preferred: One year of OR and/or Sterile Processing Department (SPD) experience. * Required: 2–5 years of face-to-face customer service experience. Additional Requirements * Strong communication skills with the ability to anticipate and respond quickly and accurately. * Availability for 24/7 hospital coverage, including rotational shifts on weekdays, weekends, and holidays. * COVID-19 vaccination is required for this position.

Job Description H&H is seeking a Load Rating Engineer to join the firm’s New York City Asset Management team. This position supports the continued expansion of H&H’s bridge inspection and structural services in response to growing client and project demands within the structural and transportation markets. The Load Rating Engineer focuses on hands-on project delivery, performing bridge load rating analyses to support inspection programs, new designs, rehabilitation efforts, load posting decisions, and overload permitting for a diverse public agency client base in the New York Metropolitan area and beyond. With over 139 years of experience, H&H is a trusted full-service infrastructure engineering firm. With more than 600 employees across 32 offices nationwide, H&H delivers comprehensive engineering solutions across the full project life cycle, from planning and design through construction, inspection, and asset management. Responsibilities • Perform Level 1 and Level 2 bridge load rating analyses using routine and refined methodologies, • Conduct load rating calculations using LRFR, LFR, ASR, permit vehicle, specialized hauling vehicle, and non-standard loading methodologies, • Prepare load rating reports and technical documentation incorporating inspection data, as-built information, material properties, and deterioration effects, • Utilize AASHTOWare Bridge Rating software for integrated load rating workflows, • Perform refined and advanced analyses using three-dimensional finite element modeling tools such as CSiBridge, SAP2000, or similar platforms, • Coordinate with bridge inspection teams, structural engineers, project managers, and agency stakeholders to integrate load rating results into bridge management and rehabilitation strategies, • Review field inspection data to validate modeling assumptions and refine analytical inputs, • Apply engineering judgment in accordance with the latest AASHTO Manual for Bridge Evaluation, FHWA guidance, and state-specific requirements including NYSDOT standards, • Support quality control reviews of load rating models, analyses, and deliverables under the guidance of senior technical staff, • Bachelor’s degree in Civil Engineering or Structural Engineering, • Professional Engineer license required in New York; additional state licenses preferred, • Minimum of five years of structural engineering experience with emphasis on bridge load rating, inspection, or design, • HWA-approved comprehensive bridge inspection training preferred, • Proficiency with AASHTOWare Bridge Rating software strongly preferred, • Experience with three-dimensional finite element analysis tools such as CSiBridge, SAP2000, or similar software, • Strong understanding of AASHTO LRFR, LFR, and ASR methodologies, load posting, and permitting requirements, • Demonstrated ability to apply engineering judgment to routine and refined load rating analyses, • Familiarity with NYSDOT standards and regional public agency clients preferred, • Strong written and verbal communication skills Salary range — $115,000-$150,000 annually. Salary commensurate with the level of experience. We offer a professional work environment, a competitive salary, a benefits package, and 401(k). EOE M/F/DISABILITY/VETS

Job Description Senior Structural Engineer – Bridge Rehabilitation Design Lead Location: New York, NY (Hybrid) Company: Infra Tech Engineering, LLC Infra Tech Engineering, LLC (ITE) is a New York-based, civil engineering consulting firm delivering structural, transportation, and construction inspection services for NYSDOT, NYSTA, PANYNJ and other public agencies. We are seeking an experienced Senior Structural Engineer with demonstrated expertise in bridge rehabilitation analysis and design to lead critical projects in New York. NYSDOT experience is preferred. This role is ideal for a seasoned bridge design engineer capable of preparing Bridge Rehabilitation Justification Reports (BRJR) and related Design Documents and developing Preliminary and Final Design plans, leading rehabilitation design efforts from concept through completion. Key Responsibilities • Lead structural design and analysis and develop rehabilitation strategies, including deck replacement, structure steel retrofit, and substructure repairs of highway bridges and transportation structures., • Prepare and oversee development of BRJR and design approval documents, preliminary and final design plans, specifications and cost estimates., • Evaluate structural deficiencies and develop rehabilitation vs. replacement strategies., • Perform and supervise load rating analysis and bridge design using AASHTOWare Bridge Rating (BrR) and AASHTOWare Bridge Design (BrD) software., • Develop structural calculations, reports, cost comparisons, and life-cycle assessments., • Ensure compliance with NYSDOT Bridge Manual, AASHTO LRFD, and applicable federal/state standards., • Coordinate with clients including NYSDOT Structures Division and regional staff during design and review processes., • Provide QA/QC oversight for structural deliverables., • Mentor junior engineers and contribute to proposal development and technical pursuits. If you are a senior bridge engineer ready to lead rehabilitation strategy and deliver technically rigorous structural solutions, we encourage you to apply. The anticipated salary range for this position is: $135,000 – $195,000 base + performance bonus. Actual compensation will be determined based on experience, qualifications, license status, technical expertise and demonstrated experience. In addition to base salary, Infra Tech Engineering offers performance-based bonuses, medical, dental, 401K, and opportunities for leadership growth within the firm. Requirements Required Qualifications • Bachelor’s degree in Civil Engineering (Master’s preferred)., • Active Professional Engineer (PE) license (NY preferred or ability to obtain)., • 10–15+ years of experience in bridge design and structural engineering., • Demonstrated experience preparing or leading NYSDOT BRJR, design documents, preliminary and final design plans, specifications and cost estimates., • Strong experience in bridge rehabilitation, substructure and superstructure design., • Proficiency in:, • AASHTOWare BrR / BrD software, • MDX, • CSI, SAP or equivalent structural analysis software, • AutoCAD and/or MicroStation (MicroStation preferred), • Strong understanding of bridge inspection data, condition ratings, and deterioration mechanisms., • Proven ability to lead projects and guide technical staff. Benefits What We Offer • Leadership opportunity within a fast growing transportation infrastructure firm., • Competitive compensation and fringe benefits commensurate with experience., • Direct involvement in high-profile NYSDOT projects., • Collaborative, technically focused team environment.

Job DescriptionRESIDENT ENGINEER @ WTC18 (24-18) Laland Baptiste, LLC is a certified minority and woman owned construction management and consulting firm. Laland Baptiste provides innovative and professional services throughout all phases of the construction life cycle. We pride ourselves as being loyal and reliable to our customers, clients, and our greatest assets, our people. Laland Baptiste is dedicated to providing unparalleled services throughout the construction life cycle. These services include Construction Management, Program Management, Owners Representation, Resident Engineering, Inspection, Preconstruction Consulting, Change Order Review, Value Engineering, Administration Assistance, Document Control and Staff Augmentation. Our clients include NYS Office of General Services, NYC Health + Hospitals Corporation, State University of New York, Dormitory Authority of the State of New York, NYC Department of Design and Construction, NYC Parks & Recreation, NYC School Construction Authority, NYC Economic Development Corporation, Battery Park City Authority, and NYS Parks, Recreations and Historic Preservation. POSITION – Resident Engineer - Civil, starting immediately. SCOPE – Manage the scope of work, schedule, contractor’s field procedures and construction problems, and other technical information for the successful delivery of projects within budget and schedule. Work generally pertains to building concrete work, civil site work, electrical, environmental, and plumbing knowledge. REQUIREMENTS: • Act as the day-to-day construction manager for assigned projects, reporting to the Senior Resident Engineer., • Assist the Senior Resident Engineer in Coordinating with Facility forces and other stakeholders to advance work in the most efficient manner possible while least impacting facility operations., • Understand the Contract and assist the Senior Resident Engineer in using its clauses to administer and enforce policy necessary to complete projects., • Advise Senior Resident Engineer of contractor disputes and help use the administrative process to resolve., • Oversee field staff – ensure that they are properly carrying out their functions of ensuring proper installation and advancement of construction and that they are filing the proper documentation., • Review contractor payments, assist the Senior Resident Engineer in reporting monthly on construction progress and financial health of projects, and elevate potential issues., • Bachelor’s degree in Civil or Structural Engineering from an accredited College or University., • Minimum 10 years of experience managing construction work, varied in size (projects ranging from $500K to $5 million plus) and complexity (multiple crew and crew sizes per shift)., • Valid driver’s license required., • Experience with Parks projects, • OSHA 30-hour certification required., • In addition to night and weekend shift work, ability to stay late or come in early as needed. bx01Ab9S2U

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Mid-Level Electrical Engineer. We are seeking a motivated Electrical Engineer to join our Engineering team. The ideal candidate will have experience delivering electrical design services for New York City based projects, specifically in public sector work, but commercial and industrial experience is valued as well. The role involves preparing design drawings, performing power and lighting calculations, and coordinating with multidisciplinary teams to ensure code-compliant and high-quality designs. Responsibilities • Design and develop electrical systems including power distribution, lighting, fire alarm, and low-voltage systems, • Prepare construction documents, specifications, and detailed drawings using AutoCAD and/or Revit, • Perform load calculations, system sizing, and equipment selection in compliance with applicable codes and standards (NEC, NFPA, IEEE, etc.), • Collaborate with multidisciplinary teams (mechanical, structural, architectural) to ensure project integration and design consistency, • Conduct site visits, inspections, and field coordination as required, • Assist in cost estimating, project scheduling, and technical reviews, • Provide mentorship to junior engineers and drafters as needed Qualifications • Bachelor’s degree in Electrical Engineering, • 3–6 years of professional electrical design experience, • EIT required; PE license preferred, • Proven experience working with NYC agencies and clients, • Strong knowledge of NYC Electrical Code and related standards, • Proficiency in Revit and/or AutoCAD, • Proficiency in Microsoft Office Suite, • Proficiency in Bluebeam, • Excellent communication and coordination skills BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Civil Engineer with an emphasis in highway and roadway design. The successful candidate will be supporting our Civil/Highway Design Services group located in the Edison, NJ office. The work will employ fundamental principles including surveying, trigonometry, geometrics, fluid mechanics, utility coordination (including relocation and agreements), hydrology and hydraulics, cost estimating, and transportation engineering while using applicable software. The candidate will be involved in and complete all phases of infrastructure project development. The candidate will report directly to the Director of Civil/Highway Design Services Responsibilities • Lead the design and development of roadway, highway, and transportation projects in accordance with federal, state, and local standards (e.g., AASHTO, DOT, FHWA)., • Prepare and review plans, specifications, cost estimates, and technical reports., • Oversee and mentor junior engineers and design staff throughout project lifecycle., • Coordinate with clients, agencies, contractors, and multidisciplinary teams to ensure successful project delivery., • Manage project budgets, schedules, and scopes, ensuring adherence to quality and safety standards., • Conduct site visits and provide construction support services as needed., • Stay current on industry trends, codes, and innovative design technologies. Qualifications • A Bachelors Degree in Civil Engineering is required; Masters Degree is preferred., • 7+ years of experience in civil engineering with an emphasis in highway and roadway design projects, • Professional Engineer License (NY or NJ) is required, • Proficiency in CADD (Microstation and InRoads and AutoCAD Civil 3D), AutoTURN, Microsoft Office (i.e. Word, PowerPoint, Excel and Outlook) along with various other civil design applications, • Experience in the production of plans, specifications, and engineer’s estimates for roadway projects for NJDOT, NJTA, PANYNJ, and County or Municipal agencies, • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description GOJET AIRLINES - A&P LICENSED MAINTENANCE TECHNICIAN LOCATION - NEWARK, NJ The GoJet Airlines' A&P Maintenance Team plays a vital role in ensuring the safety of our passengers and is a key driver of the airline's operational performance. We are looking for highly qualified, Licensed Mechanic Technicians to fill positions at our Chicago-O'Hare International Airport Line Maintenance Base. As an A&P Licensed Maintenance Technician at GoJet Airlines, you will be responsible for the inspection, repair, and maintenance of our aircraft to ensure they meet the highest standards of safety and performance. You will work closely with other maintenance personnel to troubleshoot and resolve issues, perform routine inspections, and comply with all regulatory requirements. QUALIFICATIONS/REQUIREMENTS: • Must hold an FAA Airframe and Power plant license, • Legal right to work in, and travel freely in and out of, the United States, • Must possess a minimum of high school diploma or equivalent, • Must possess a valid driver‘s license, • Legally operate company vehicles and equipment with no restrictions, • Must be able to provide your own tools, • FCC License Helpful, but not required, • DOT required pre-employment drug test, • TSA required fingerprint check for Criminal History Records Check, • Must be able to work any shift, • Must be able to read and converse fluently in English, • Must be able to lift 50 lbs., • Able to stand for extended periods of time, • Able to climb stairs, ladders, and work platforms, • Aircraft Maintenance:, • Perform scheduled and unscheduled maintenance on aircraft, including engines, landing gear, avionics, and other critical components., • Conduct thorough inspections to identify and address potential issues before they become problems., • Troubleshooting and Repairs:, • Diagnose and troubleshoot mechanical and electrical problems, using technical manuals and sophisticated diagnostic equipment., • Repair or replace defective parts, ensuring all work is completed to regulatory and company standards., • Compliance and Documentation:, • Ensure all maintenance activities comply with FAA regulations, company policies, and industry standards., • Accurately document all maintenance work performed, including parts used, repairs completed, and inspections conducted., • Collaboration and Communication:, • Work closely with other maintenance technicians, engineers, and flight operations personnel to ensure seamless and efficient aircraft operations., • Industry leading pay scale $26.71/hr -$49.20/hr • Generous annual pay increase, • Performance bonuses, • Health, dental & life Insurance, • 401(k) retirement plan, • Airline travel benefits GoJet Airlines operates as a regional partner for United Airlines, providing daily flights across the U.S. and Canada. Our commitment to safety, customer service, and operational excellence has established us as a leader in the regional airline industry. Join our team and be a part of our exciting journey in the aviation world!

Job Description Job Summary This management position exists in several Program Divisions. Under the general supervision of the Divisional Vice is responsible for the oversight of the administrative and clinical aspects of the program. Responsible for personnel management, fiscal operations, inventory management, client services, safety and welfare of staff and clients, hiring and training of personnel, directing and coordinating the activities of the staff, and general administration of the program. Establishes clinical procedures and policies for clients and ensures that program operations meet or exceed agency and regulatory guidelines. Essential Tasks: To perform this job successfully, an individual must be able to perform each essential duty listed satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions unless this causes undue hardship to the agency. Provides Clinical Services: • Directs clinical treatment services provided to consumers, oversees the development, implementation, and review of treatment plans to address issues of mental illness and substance abuse., • Provides clinical oversight of symptom assessment and rehabilitative services provided by the staff to consumers/residents to ensure the quality and that services meet or exceed regulatory guidelines. Monitors counseling performed by staff either individually with a consumer/resident or in groups to evaluate the quality of the service., • Ensures staff is obtaining information, such as medical, psychological, and social factors contributing to the individual's situation, and that the staff is evaluating the consumer's/resident's capabilities. Regularly directs the inspection of case records to evaluate the completeness and quality of treatment plans, quarterly service plans reviews, assessments, medical records, and progress notes. Responsible for the accuracy of data entered into a computer database or manual records., • Informs staff to the types of clinical services, recreational activities, and ICL programs available., • Reviews crisis assessment of consumers/residents with staff, reviews nonverbal and verbal crisis intervention techniques to be used with each individual consumer/resident, and staff-actions during a crisis situation., • Informs staff of community resources and ensures that staff are accompanying consumers on regularly scheduled or emergency visits to medical treatment facilities, social agencies, government offices, or other locations associated with treatment or assistance of the consumer/resident., • Immediately reports serious incidents, allegations of abuse, incidents, or sensitive situations and completes incident reports in accordance with agency policy., • Establishes and maintains work schedules in accordance with agency policy and assignments of staff. Responsible for managing the completion of time clock edits of staff within the suspense established by the Human Resources Department., • Ensures staff compliance with the agency's time and attendance policy; recommends disciplinary action for those out of compliance., • Manages the completion of performance evaluations, recommends staff for the employee recognition award and promotions., • Conducts staff supervision in accordance with agency and division policy., • Administers disciplinary actions in accordance with agency disciplinary policy, conducts disciplinary counseling, completes disciplinary action reports, and recommends employee terminations as needed., • Reviews authorized staff positions and personnel budget, submits Request for Personnel (RFP), on vacant staff position(s), interviews candidates for employment in accordance with agency policy and employment law. Recommends changes to authorized staffing patterns and personnel budget., • Ensures that staff have attended required in-service training and schedules employees to attend both in-service training and training provided by vendors. Conducts training on clinical subjects, charting, fire safety plan, fire drills, emergency plans and procedures, building security, volunteers and interns, and site-specific exposure control plan., • Manages employee accident reporting and initial submission of workers' compensation claims., • Monitors employee morale and the climate of the work environment to stop or eliminate sexual harassment or any form of employee harassment or employee discrimination. Responsible for taking complaints of sexual harassment, informing the Human Resources Department of the complaint, and investigating the complaint (as directed)., • Monitors employee accrual totals, approves or recommends approval of employee requests for time off, and notifies the Department of Human Resources when an employee should be placed on or taken off Family and Medical Leave (FMLA). Maintains contact with staff while out on FMLA., • Provides oversight in the area of administrative recordkeeping, maintenance of office equipment, reception of visitors, phone reception, and stocking office supplies., • Manages the orientation of new personnel and the sponsorship program., • Maintains accountability and serviceability of all ICL property assigned to the program to include vehicles. Reports lost stolen, missing, or damaged property in accordance with ICL policy. Conducts initial investigations of property that is lost, stolen, missing, or damaged., • Authorizes the purchase of supplies and equipment; properly secures all property and equipment. Conducts regular inspections of vehicles and property to ensure cleanliness, accountability, and serviceability., • Conducts regular inspections of consumer/resident rooms or apartments to ensure property accountability and serviceability. Establishes key control procedures., • Ensures internal program compliance with federal, state, city, and agency regulatory requirements. Monitors the quality of the rehabilitative services provided to consumers/residents., • Responsible for the development of a program mission statement and program goals that supports the division and agency mission statements and goals., • Coordinates with the Department of Quality Management and the departments in the Administrative Division for staff assistance in the preparation for an audit., • Reviews plans of corrective action, incident reports, and program evaluation reports and addresses areas that need improvement., • Exercises control over budgets through planning, prioritizing of spending, and monitoring of spending patterns., • Approves/disapproves all purchase orders and financial requests from staff and submits approved purchase orders and financial requests to supervisor for approval., • Manages resident/consumer funds program. Develops internal money management procedures., • Educates staff in the benefits of consumer and family involvement, levels of consumer and family involvement, types of consumer and family involvement, nature of consumer and family involvement, and issues of working with consumers and families., • Develops a program strategy for working with consumers and families and develops activities that foster program-consumer and family cooperation and coordination., • Promotes Mental Health and Managed Care programs in local communities; maintains liaison between local elected officials and community boards, educates citizens in the community on mental illness., • Educates staff and residents/consumers on the importance of a constructive relationship with local elected officials, community boards, and community citizens. ADDITIONAL TASKS: • May conduct regular inspections of apartments and contacts landlords to report repairs that need to be made in accordance with rental agreements., • May be responsible for facility maintenance and reports needed repairs to the Director of Real Property Operations., • May review drafts, procedures, and job descriptions., • May be involved in hosting visitors from community, regulatory offices, and/or other agencies., • May be chairperson or member of an agency or division committee(s)., • Ability to lead a multi-disciplinary staff of professionals and paraprofessionals in providing treatment services., • Ability to manage multiple projects, delegate tasks, and check on the completion of assigned tasks., • Ability to manage resources, which includes money, material, time, and people., • Serves as a role model to staff and consumers/residents., • Strong interpersonal skills, emotional intelligence, and flexibility, • Highly-developed clinical, engagement, and motivational skills;, • Experience with risk assessment and risk management;, • Track record of delivering quality treatment services to individuals with SMI, • Experience delivering treatment, rehabilitation and support services in the community;, • Proficient in computers and Electronic Health Record (EHR), • Ability to effectively hold field staff accountable and to spend a significant portion of the workweek traveling, • Experience working with individuals who were homelessness or unstably housed, • Able to travel and conduct field work MINIMUM REQUIRED EDUCATION AND/OR EXPERIENCE: Master's degree in Social Work, Psychology, or other mental health field with three years of professional mental health experience (depending on program size and complexity) including at least three years (depending on program size and complexity) in a supervisory capacity. PREFERRED: • NYS Licensure in a recognized mental health profession (LMSW or LMHC), • Bilingual in Spanish, • Experience with housing, individuals with Serious Mental Illness and Substance Use #ICLRN

Job DescriptionPOSITION SUMMARY: The Municipal Engineer is a professional with 7+ years of experience. This individual will design, manage and/or represent a variety of infrastructure projects (owned by municipalities and local school districts). PRIMARY DUTIES: • Responsible to act as the client manager to one or more municipalities or other public agencies. The client manager will act as the single point of contact between the firm and the client. He/she will supervise and coordinate all projects performed in the firm on behalf of the client, to the client’s satisfaction., • Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure., • Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools., • Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications., • Estimate quantities and cost of materials, equipment, or labor to determine project feasibility., • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact., • Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations., • Identify environmental risks and develop risk management strategies for projects., • Attending regularly scheduled public meetings (conducted by Municipal clients) in the capacity of Municipal Engineer, or Land Use Board Engineer. Prepare and present public reports on topics such as bid proposals, project status reports and developmental review projects., • Provide technical advice to clients regarding design, construction, or capital program modifications., • Support of the field activities of our construction inspection staff, including providing timely data, shop drawing review, and client coordination. KNOWLEDGE, SKILLS and ABILITIES: • Municipal Engineering experience preferred but not required., • Strong oral and written communication skills, • Ability to make public presentations., • Ability to define problems, collect data, establish facts and draw conclusions to present to co-workers and clients., • Strong organizational skills and attention to detail, • Knowledge of computer aided design software., • Ability to work in groups as well as individually.EDUCATION/EXPERIENCE:, • Bachelors of Science Degree in Civil Engineering from an accredited four-year college or university CERTIFICATIONS/LICENSES REQUIRED • PE License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasionally lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job DescriptionPOSITION SUMMARY: The Water/ Wastewater Project Engineer/ Manager is a professional with a minimum of 8 years of experience. This individual will plan, design and perform analysis on water/wastewater engineering projects such as pipelines; pumping stations; and treatment facilities. Engineer shall be self-motivated, capable of acting as firm’s representative to clients, and providing support to branch offices in NJ/PA/DE/MD area. PRIMARY DUTIES: • Hydraulic calculations and layout of structures., • Producing correspondence/reports/biddable documents for arsenic, radium and iron removal water plants; wells; water storage tanks; pumping stations; piping systems; and wastewater treatment plant improvements., • Engineering support to our inspection department., • Act as firm’s representative to Townships; utility authorities; and private utility companies., • Draft concise proposals for new work., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • "Proactive"' identification of problems/issues coupled with detailed analysis and effective resolution., • Producing all deliverables associated with this position., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • Regulatory permitting., • Knowledge of water/wastewater equipment and their purpose., • Ability to read and comprehend complicated construction, drawings, schematics, specifications, codes, and handbooks., • Ability to clarify and concisely express thoughts verbally and in written correspondence/reports/specifications., • Provides effort and takes pride in all work assignments produced., • Not afraid to ask for guidance/assistance in order to expedite the date of assignment deliverables., • Ability to simultaneously work on group and individual assignments., • Capable of providing directions and mentoring less experienced staff., • Capable of managing project meeting attended by either staff, clients or contractor’s personnel., • Familiarity with NJDEP regulations and compliance requirements., • Must have effective communication, management and writing skills., • Must be skilled in the use of Word/Excel products., • Bachelors of Science Degree in Civil, Mechanical, Structural, or Chemical Engineering curriculum from an accredited four-year college or university. CERTIFICATIONS/LICENSES REQUIRED • NJPE License Required or Ability to Acquire NJPE Reciprocity Essential, • Professional Licensure Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. Occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description Soar With Us! Dassault Falcon Jet proudly provides competitive pay, quality benefits, and programs that support your career advancement and personal development. Our benefits are designed to support you and your family’s health and wellbeing, help you secure a strong financial future, and empower you to be successful in all aspects of your work and life. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us! Why Join Us? Impactful Work: Your expertise will directly contribute to the safety and efficiency of our operations. Growth Opportunities: We support your professional development and offer opportunities for advancement. Collaborative Environment: Work with a team of dedicated professionals who are passionate about aviation. Ready to soar with us? Apply now and be a part of our mission to support the world's greatest business jets! JOB SUMMARY: Under the direction of the Data Manager, the Aircraft Maintenance Programs Administrator is responsible for the daily administration, maintenance and customer support functions of Dassault Falcon Maintenance-related programs. This role supports two core OEM programs: OCIP (Optimized Continuous Inspection Program): An alternative to Chapter 5 scheduled inspections. The Administrator will assist operators in understanding task intervals, interpreting aircraft maintenance program requirements and support block-based inspection methodology approved for Dassault aircraft. CATS (Computerized Aircraft Troubleshooting System): Dassault centralized troubleshooting database, used by customers to identify and resolve aircraft symptoms. The administrator will work closely with engineering and Technical Support teams to maintain an accurate symptom-to-solution library. The Aircraft Maintenance Programs Administrator will also manage aircraft maintenance data reporting, coordinate basic technical data exchanges with the aircraft OEM, support the technical documentation sales team with subscription renewals, deliver customer presentations and demonstrations. This position requires strong communication skills, aviation maintenance-program understanding, and the ability to translate technical concepts clearly to customers and internal stakeholders. MINIMUM REQUIRED QUALIFICATIONS: • Four Year College Degree in Aviation Management, Maintenance Management, Aviation Business Administration or related field; equivalent aircraft maintenance experience may be considered, • 3+ years of aviation maintenance-planning experience, including understanding of ATA Chapter 5 time-limits, scheduled maintenance concepts or inspection program logic., • Working knowledge of aircraft troubleshooting principles, such as MEL, AMM, Fault Isolation or experience as an A&P technician or equivalent maintenance role., • Ability to interpret technical documentation (AMM, MPD, Service Bulletins) and translate into guidance for customers, • Familiarity with maintenance-tracking or MRO software systems such as CAMP. Corridor, Traxxall, Veryon tracking), • Strong analytical and organizational skills, including basic proficiency in Excel for Reporting, trend tracking and data verification., • Experience supporting Dassault Falcon aircraft, • Familiarity with CRM (Customer Relationship Management tools and communication platforms like Teams and SharePoint., • FAA Airframe and Power plant Certificate (A&P), • 5 Years’ experience with maintenance and troubleshooting on Falcon Jet Aircraft, • Advanced computer skills especially Microsoft Office products, • Office environment, • Use of personal computer required Note: the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Who We Are: CAMBA is a community of staff, volunteers, clients, donors, neighbors and partners who work together to build an inclusive New York City, where all children and adults have access to the resources and supports, they need to thrive. We take a comprehensive approach by offering more than 180 integrated programs in: Education & Youth Development, Family Support, Job Training & Employment Support Services, Health, Housing, and Legal Services. We reach almost 80,000 individuals and families, including almost 13,000 youth. CAMBA serves a diverse cross section of New Yorkers from new mothers in Brownsville to job seekers in the Rockaways. More than half of our clients are immigrants and refugees from around the globe. Over 85% of our families are living in poverty, reflecting the challenges faced by nearly 1.7 million New Yorkers today. CAMBA operates 6 single adult shelters and 6 family shelters and one drop in center. Each shelter offers clients a supportive, structured therapeutic, safe, and drug-free facility. Homeless (often mentally-ill and substance-abusing) men and women are provided with comprehensive services to stabilize their condition in order to successfully transition into to permanent and/or supported housing. Broadway House Women’s Shelter in Bushwick serves 165 women, approximately 37 of whom are mentally ill and chemically addicted. Position: Maintenance Worker Reports To: Supervisor I Location: 1245 Broadway, Brooklyn, NY 11221 What The Maintenance Worker Does: The person filling this position is expected, under general supervision, to: (1) develop and maintain employer relationships with the goal of identifying and meeting their HR needs; (2) match appropriate clients with appropriate job openings and arrange for interviews; and (3) persuade both prospective employers and client applicants of the features and advantages of CAMBA's job placement services, with a view toward long-term retention; including the following: • Maintain professional relationships with clients and client confidentiality., • Practice Universal Precautions/Standard Protocol & Procedures., • Follow agency protocols on PPE., • Comply with any and all Federal, State, City, and CAMBA security and privacy polices intended to protect the security and privacy of individually identifiable health information., • Perform daily pre-trip vehicle inspection prior to first trip of the day., • Immediately report vehicle and/or equipment that are inoperable, missing or improperly utilized to Director of Security and Operations., • Notify the police and file a report in the event of any accident while operating a CAMBA vehicle., • Notify the supervisor on duty in the event that there is any accident while operating a CAMBA vehicle., • Transport vehicle to and from auto repair shop for regular maintenance and vehicle repairs., • Complete vehicle travel log for all trips., • Assist passengers needing assistance in order to enter and/or exit vehicle., • Keep vehicle clean and/or free of litter at all times., • Ensure that the parking plaque is in place and follow the instructions on where you can use the parking plaque., • Secure EZ-Pass, gas card, vehicle cell phone and other vehicle specific valuables before and after each trip., • Transport clients and employees to appointments, meetings, and events., • Assist with client move-outs by transporting clients and their belongings to permanent housing locations and carrying belongings to new apartments., • Move items (i.e., boxed files, other facility items that require storage) from facility to CAMBA warehouse; pick up and transport supplies from the warehouse and deliver and store them at the facility., • Identify and document all maintenance issues on work order form., • Immediately report maintenance equipment issues (i.e., inoperable, missing, etc.), • Observe and report any facility conditions that could pose a safety hazard to the client or cause property damage., • Comply with all maintenance regulatory requirements at all times., • Utilize appropriate safety standards (i.e., wear safety goggles, masks, appropriate attire) and display safety signs when performing tasks., • Clean rugs, carpets, upholstered furniture, window blinds, and draperies., • Clean and sanitize toilets, sinks, tubs, showers, shower fixtures, including walls, floors, curtains, stalls, and mirrors., • Replace light bulbs, light switch covers, electrical outlet covers and ballasts as needed., • Dust and/or wipe furniture, equipment, and ceiling fans., • Collaborate with DHS or building landlords to facilitate repairs to facility., • Assisting responding to pest issues such as bed bugs, mice, etc. by working with contracted exterminators to set traps, clean and sanitize as necessary., • Separate and transport trash, recyclables and waste to disposal area and consolidate for pickup., • Respond to and prepare for inclement weather (i .e., prepare sandbags, tie down loose outdoor items, remove snow and/or ice from the sidewalks, driveways and stairs, etc.)., • Clean storm drains and gutters to ensure proper drainage., • Make minor plumbing repairs (i.e., "snake" a drain to remove clogs)., • Polish metalwork, including lighting fixtures., • Replenish bathroom supplies including toilet tissue, paper towels, and hand soap., • Wash walls, ceiling, woodwork, windows, sills and door panels, heating and cooling vents and air conditioner filters., • Plaster and paint interiors of buildings., • Hang and/or move more permanent items on walls (i.e. bulletin boards, etc.)., • Replace/repair door handles or lock cylinders as needed., • Remove graffiti from interior and exterior surfaces., • Replace cracked or missing floor tiles, wall tiles and ceiling tiles as necessary., • Move facility furniture (i.e., bed, lockers, etc.) from one area of the facility to another., • Assemble office furniture and move it to proper location., • May cut and trim grass., • Sufficient education and technical expertise to comprehend written and oral instructions (work orders); to accomplish tasks, • Must have Valid New York State Driver's License and excellent driving history., • Must complete NYS Approved Defensive Driving Classes every 3 years., • Must take Refresher Computerized Defensive Driver class, • Must remain insurable based on CAMBA's point system throughout the duration of employment., • If required to drive 15 passenger van, must score at least 80% on computerized 15 passenger van improvement test every year., • If required to drive 15 passenger van, must pass an observed Van Road Test, • Acknowledge review of CAMBA's Transportation Policy, • May be required to become First Aid/CPR certified., • May be required to become certified in overdose prevention., • Bi-lingual preferred. Pre and/or Post Employment Requirements: Status: Full-time (35 hours per week) Benefits: CAMBA offers a comprehensive benefits package including health insurance, dental insurance, 403(b) retirement plan with employer match, paid time off (vacation, personal, and sick time), and paid holidays. CAMBA is an Equal Opportunity Employer. We value a diverse workforce and inclusive workplace. People of color, people with disabilities, and lesbian, gay, bisexual, and transgender people are encouraged to apply. We consider all applicants without regard to race, color, religion, creed, gender, gender identity, gender expression, national origin, age, disability, socio-economic status, marital or veteran status, pregnancy status or sexual orientation. Powered by JazzHR jl9A38ugBD

Job DescriptionAbout CookUnity: Food has lost its soul to modern convenience. And with it, it has lost the power to nourish, inspire, and connect us. So in 2018, CookUnity was founded as the first-of-its-kind platform that connects the world with the source of truly great food: chefs. Today, CookUnity delivers 50 million meals a year from the industry's best chefs to homes all over the country. Fresh. Ready-to-eat. And crafted with the passion that nourishes body and soul. Unwilling to stop there, CookUnity is expanding beyond delivery to become an ever-innovating marketplace focused on our singular mission: empower Chefs to nourish the world. If that mission has you hungry in more ways than one, you've found the right job posting. The Role: The Food Safety Specialist ensures a sustainable, safe, clean, and functional environment in the CookUnity Commissary. Responsibilities: • Monitor food production and ensure all Chefs are adhering to food safety regulations, • Perform critical checks including refrigeration, chemical concentration and and temperature checks, • Communicate kitchen rules to Chefs as needed- gloves, hairnets, proper hand washing, cleaning of equipment, sanitizing of prep stations, etc., • Ensures all items in coolers and freezers are appropriately labeled. (Labels must include Chef Name, Product Name and Date), • Daily facility compliance walks including corrective actions, • Work closely with other departments such as Kitchen Operations, Supply Chain and Maintenance to correct issues affecting food safety and quality., • Ensure the facility is always ready for inspection by local regulator or third party auditor, • Ensure all walk-in coolers and stand alone fridges remain closed and temperature is at 41 degrees or lower, • Perform weekly thermometer calibrations for Chefs and Food Safety team, • Collaborate with other members of Food Safety team in Chef and employee training on food safety and sanitation topics, • Perform facility and department audits, • Collect and provide data on cooler function and sanitary transport to operations and facilities teams Minimum Requirements: • Experience working in a high compliance food processing facility (USDA, FDA), • Positive and committed to doing the right thing, • Experience working with a team in a fast paced environment, • Good communication skills and ability to speak in a professional manner to a wide range of partners and stakeholders, • Ability to build relationships and explain food safety concepts in plain language, • Ability to work independently and complete assigned duties without direct supervision, • Proficiency G Suite/Google Workspace., • Team player with a positive, collaborative mindset, • Ability to work 30-40 hours per week., • Flexible availability for one of the following shifts: 6:00 AM to 2:00 PM, 2:00 PM to 10:00 PM, or 10:00 PM to 6:00 AM, • Bilingual English/Spanish required Benefits 🩺 Health Insurance coverage 🌅 401k Plan ⛱ Paid sick days 🐣 Family leave: 12 weeks for primary caregiver and 6 weeks for secondary caregiver, fully paid 🕯 Compassionate Leave: 3-5 days each time the need arises 🌟 Awesome opportunity to join a company that is looking to change how we eat and how chefs work! Compensation All final pay rates will be determined by candidates experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.Pay Range for this position$20—$26 USD If you're interested in this role, please submit your application, and if we think you might be a fit, we'll get in touch with you. Thank you for your time! CookUnity is an Equal Opportunity Employer. We are dedicated to creating a community of inclusion and an environment free from discrimination or harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, citizenship status, protected veteran status, genetic information, or physical or mental disability. A quick note for all candidates We've recently seen an increase in recruitment scams across the industry, and we want to make sure you (and your data) stay safe while applying to CookUnity. We also want you to know that we take this seriously — sometimes, as part of our process, we may ask for a brief "proof of humanity" to confirm that we're connecting with a real person, not an impersonator. Here are a few tips to help you protect yourself and know what to expect from us: • Apply only through our official channels. All open roles are listed on our official careers page: careers.cookunity.com, • Our recruiters are real people — and easy to verify. You can always find them on LinkedIn with verified profiles. If you're unsure, feel free to reach out to us on our official LinkedIn Company Page., • We only communicate through official CookUnity channels. That means emails ending in @cookunity.com and interviews held through official company platforms (Google Meet or Zoom) — never WhatsApp, Telegram, or SMS.

Job DescriptionAbout CookUnity: Food has lost its soul to modern convenience. And with it, it has lost the power to nourish, inspire, and connect us. So in 2018, CookUnity was founded as the first-of-its-kind platform that connects the world with the source of truly great food: chefs. Today, CookUnity delivers 50 million meals a year from the industry's best chefs to homes all over the country. Fresh. Ready-to-eat. And crafted with the passion that nourishes body and soul. Unwilling to stop there, CookUnity is expanding beyond delivery to become an ever-innovating marketplace focused on our singular mission: empower Chefs to nourish the world. If that mission has you hungry in more ways than one, you've found the right job posting. The Role CookUnity is seeking an experienced and highly motivated Senior Manager, Food Safety to lead and scale food safety excellence across our NYC operations. This role is central to enabling CookUnity's rapid growth and marketplace expansion by building robust, data-driven food safety systems that protect customers, strengthen brand trust, and support operational innovation. Reporting into senior Quality & Food Safety leadership, this role partners closely with Operations, Culinary, Supply Chain, and Regulatory teams to embed preventive controls, regulatory readiness, and continuous improvement into daily execution. The ideal candidate is both strategic and hands-on—equally comfortable setting enterprise standards and working directly on the production floor. Responsibilities • Lead site-level food safety strategy for high-volume, ready-to-eat meal production, ensuring alignment with CookUnity's growth, retention, and marketplace objectives, • Serve as the primary food safety authority for regulatory agencies, third-party audits, and inspections; own inspection readiness, execution, and corrective action management, • Oversee preventive control programs and critical limits, including cold-chain management, sanitation systems, chemical controls, and cook-chill processes, • Analyze, trend, and interpret food safety and environmental monitoring data to proactively identify risk and drive continuous improvement, • Design, implement, and scale food safety programs, including internal and Chef audits, shelf-life validation, environmental monitoring, and risk assessments, • Partner with Operations and Culinary leaders to integrate food safety into production planning, new menu launches, and process innovation, • Lead food safety investigations, root cause analysis, and CAPA programs to prevent recurrence and strengthen systems, • Develop and deliver engaging training programs for GMPs, sanitation, allergen control, and safe food handling for employees and Chef partners, • Build and mentor high-performing food safety team members, fostering technical excellence and leadership capability, • Translate evolving federal, state, and local regulations into clear, practical standards that support speed, consistency, and compliance, • Champion a strong, proactive food safety culture across multiple shifts and teams in a fast-paced environmentQualifications, • Bachelor's degree in Food Science, Microbiology, Food Safety, or a related discipline; advanced degree preferred, • HACCP, PCQI, and/or Certified Food Safety Manager credentials, • 7+ years of progressive experience in food safety, quality, or regulatory leadership within ready-to-eat, fresh, or high-compliance food production environments, • Demonstrated success leading food safety programs at scale in complex, high-growth operations, • Strong working knowledge of FDA, USDA, and local regulatory requirements, preventive controls, and HACCP systems, • Proven ability to influence cross-functional leaders and drive change without direct authority, • Excellent communication, training, and stakeholder engagement skills, • Highly analytical, detail-oriented, and comfortable working with performance data and risk metrics 🌅 401k Plan 📈 We grow, you grow: Stock Options Plan granted on Day 1 🌟 Eligible for a bi-annual performance bonus ⛱ Unlimited PTO 🗓️ 5-year Sabbatical: After 5 years with CookUnity, you get a 4-week paid sabbatical 🐣 Paid Family Leave 🕯 Compassionate Leave: 3–5 days each time the need arises 🥘 Monthly CookUnity credits to enjoy our meals 🧘🏽️‍♀️ Wellness perks: nutritional coach access and fitness subsidies 👩🏾️‍🏫 Personalized Spanish coach 🌟 Opportunity to join a company that's redefining how we eat and how chefs work Compensation All final pay rates will be determined by candidates experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.Pay Range for this position$140,000—$160,000 USD If you're interested in this role, please submit your application, and if we think you might be a fit, we'll get in touch with you. Thank you for your time! CookUnity is an Equal Opportunity Employer. We are dedicated to creating a community of inclusion and an environment free from discrimination or harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, citizenship status, protected veteran status, genetic information, or physical or mental disability. A quick note for all candidates We've recently seen an increase in recruitment scams across the industry, and we want to make sure you (and your data) stay safe while applying to CookUnity. We also want you to know that we take this seriously — sometimes, as part of our process, we may ask for a brief "proof of humanity" to confirm that we're connecting with a real person, not an impersonator. Here are a few tips to help you protect yourself and know what to expect from us: • Apply only through our official channels. All open roles are listed on our official careers page: careers.cookunity.com, • Our recruiters are real people — and easy to verify. You can always find them on LinkedIn with verified profiles. If you're unsure, feel free to reach out to us on our official LinkedIn Company Page., • We only communicate through official CookUnity channels. That means emails ending in @cookunity.com and interviews held through official company platforms (Google Meet or Zoom) — never WhatsApp, Telegram, or SMS.

Job DescriptionAbout CookUnity: Food has lost its soul to modern convenience. And with it, it has lost the power to nourish, inspire, and connect us. So in 2018, CookUnity was founded as the first-of-its-kind platform that connects the world with the source of truly great food: chefs. Today, CookUnity delivers 50 million meals a year from the industry's best chefs to homes all over the country. Fresh. Ready-to-eat. And crafted with the passion that nourishes body and soul. Unwilling to stop there, CookUnity is expanding beyond delivery to become an ever-innovating marketplace focused on our singular mission: empower Chefs to nourish the world. If that mission has you hungry in more ways than one, you've found the right job posting. The Role: The Food Safety Specialist ensures a sustainable, safe, clean, and functional environment in the CookUnity Commissary. Responsibilities: • Monitor food production and ensure all Chefs are adhering to food safety regulations, • Perform critical checks including refrigeration, chemical concentration and and temperature checks, • Communicate kitchen rules to Chefs as needed- gloves, hairnets, proper hand washing, cleaning of equipment, sanitizing of prep stations, etc., • Ensures all items in coolers and freezers are appropriately labeled. (Labels must include Chef Name, Product Name and Date), • Daily facility compliance walks including corrective actions, • Work closely with other departments such as Kitchen Operations, Supply Chain and Maintenance to correct issues affecting food safety and quality., • Ensure the facility is always ready for inspection by local regulator or third party auditor, • Ensure all walk-in coolers and stand alone fridges remain closed and temperature is at 41 degrees or lower, • Perform weekly thermometer calibrations for Chefs and Food Safety team, • Collaborate with other members of Food Safety team in Chef and employee training on food safety and sanitation topics, • Perform facility and department audits, • Collect and provide data on cooler function and sanitary transport to operations and facilities teamsMinimum Requirements:, • Experience working in a high compliance food processing facility (USDA, FDA), • Positive and committed to doing the right thing, • Experience working with a team in a fast paced environment, • Good communication skills and ability to speak in a professional manner to a wide range of partners and stakeholders, • Ability to build relationships and explain food safety concepts in plain language, • Ability to work independently and complete assigned duties without direct supervision, • Proficiency G Suite/Google Workspace., • Team player with a positive, collaborative mindset, • Ability to work 30-40 hours per week., • Flexible availability for overnight shifts, such as 10:00 PM to 6:00 AM, • Bilingual English/Spanish required Benefits 🩺 Health Insurance coverage 🌅 401k Plan ⛱ Paid sick days 🌟 Awesome opportunity to join a company that is looking to change how we eat and how chefs work! Compensation All final pay rates will be determined by candidates experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.Pay Range for this position$21—$27 USD If you're interested in this role, please submit your application, and if we think you might be a fit, we'll get in touch with you. Thank you for your time! CookUnity is an Equal Opportunity Employer. We are dedicated to creating a community of inclusion and an environment free from discrimination or harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, citizenship status, protected veteran status, genetic information, or physical or mental disability. A quick note for all candidates We've recently seen an increase in recruitment scams across the industry, and we want to make sure you (and your data) stay safe while applying to CookUnity. We also want you to know that we take this seriously — sometimes, as part of our process, we may ask for a brief "proof of humanity" to confirm that we're connecting with a real person, not an impersonator. Here are a few tips to help you protect yourself and know what to expect from us: • Apply only through our official channels. All open roles are listed on our official careers page: careers.cookunity.com, • Our recruiters are real people — and easy to verify. You can always find them on LinkedIn with verified profiles. If you're unsure, feel free to reach out to us on our official LinkedIn Company Page., • We only communicate through official CookUnity channels. That means emails ending in @cookunity.com and interviews held through official company platforms (Google Meet or Zoom) — never WhatsApp, Telegram, or SMS.

Job Description BronxWorks helps individuals and families improve their economic and social well-being. From toddlers to seniors, we feed, shelter, teach, and support our neighbors to build a stronger community. In all aspects of our work, we strive for the highest ethical and performance standards and are guided by the belief that people are to be treated with dignity and respect regardless of their present situation or past experiences. Across our 60+ locations, we provide programs in a variety of service areas, including workforce development, children, youth, families, seniors and homeless prevention. The Living Room is the BronxWorks central location for its adult homeless services. BronxWorks operates three 24-hour programs that include a drop-in center, a 50-bed safe haven for chronically street homeless adults, and our borough wide mobile street outreach program. All of the programs provide direct services to street homeless individuals in the Bronx including case management, food, clothing, emergency shelter, referrals to NYC shelters, and permanent housing placement. RESPONSIBILITIES • Coordinate with Operations Director and Building Management to maintain efficient operation of the physical plant., • Train and supervise Repair Technicians and Porters., • Maintain heating and ventilation systems centrally, in office locations, and in individual units., • Maintain boiler unit and develop schedules for filter cleanings, checks of water levels, and boiler room maintenance., • Maintain sewer drains and traps., • Maintain common area lighting, emergency exit doors and lights, laundry facilities, pool areas, outdoor lighting, gymnasium lighting, entrance-ways and other exit doors., • Maintain all venting systems, including lint traps and dryers in laundry rooms., • Perform exterminating services on spot basis., • Participate in and be responsible for stand-by emergency schedule for evenings, weekends and holidays., • Responsible for the cleaning, painting, and replacement of defective fixtures when an apartment becomes vacant., • Assist new residents in getting settled and acquainted with the operation of appliances, fixtures, emergency equipment; prepare the apartment move-in inspection form., • Conduct inspections as required for preventative maintenance program and keep records of such inspections., • Have knowledge of and label all water and gas shut-offs, sewer clean-outs, standpipe and sprinkler system shut-off valves, etc., • Have knowledge of swimming pool operations including the testing of chemicals to clean., • Review maintenance work orders and assign work to porters and repair technicians as necessary., • Make weekly “roof to cellar” inspections., • Supervise maintenance staff, assign tasks and review time sheets., • High School Diploma or equivalent., • Experience in building management., • Experience initiating and developing building cleaning standards to conform with high levels of expectation., • Certification in operation of all fire department standards such as Standpipe with City Mains, Fire Drill Conductor, Maintenance of I side Alarm System, Supervision of Low PSI Oil Burner, etc., • Proficiency in standards applied by the OSHA and Department of Health for kitchen operation, youth programs, and congregate social service programs., • Proficiency in English required; proficiency in a second language preferred., • Valid, clean driver’s license from the state in which the bearer resides preferred., • FDNY boiler certificate of fitness., • FDNY sprinkler certificate of fitness (if the building has a sprinkler)., • FDNY standpipe certificate of fitness (if the building has a standpipe)., • FDNY fire drill conductor certificate of fitness., • FDNY interior fire alarm maintenance certificate of fitness., • FDNY fire safety coordinator certificate of fitness., • Ability to use a computer for prolonged periods., • Ability to lift, pull, push and/or move a minimum of 60 pounds, • Ability to stand, walk, crouch or sit for long periods of time, • Ability to climb five flights of stairs, if required to conduct home visits and/or fieldwork., • Ability to bend and retrieve objects and/or documents., • Ability to travel in the boroughs of New York City and its adjacent counties via public transportation., • Ability to travel for a minimum of 1 mile within a reasonable amount of time and in all types of weather, including inclement weather, if required to conduct home visits and/or field work. BronxWorks seeks to build an inclusive organization grounded in respect for differences. BronxWorks is committed to equal employment opportunity and providing reasonable accommodations to qualified candidates and employees pursuant to applicable law. This commitment applies to all terms, conditions, and privileges of employment, including but not limited to recruitment, hiring, compensation, training and employee development, placement, promotion, demotion, upgrading, downgrading, transfer, layoff and termination. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, gender, sex, age, religion, creed, national origin, ancestry, citizenship, marital status, sexual orientation, physical or mental disability, medical condition, military and veteran status, gender identity or expression, genetic information, status as a victim of domestic violence, or any other characteristic protected by federal, state, or local law. If you require reasonable accommodation as part of the application process, please contact . #INHGH

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Project Manager. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities • Provide the administration and coordination of activities for the design and construction of the more complex and/or highly visible construction and modernization projects under the guidance of a senior level client Project Officer, • Ensure the quality and high standards of performance and compliance in both design and construction by all consultants, vendors, etc., • Make decisions and take action in a timely manner to expedite the timely completion of the construction process, • Correct mistakes and errors in design and construction before they can be extensively incorporated into the project or as early in the construction process as possible, • Responsibilities are varied and include coordinative problem solving and managerial functions of these projects, • Make decisions on phasing and scheduling of projects, • Prepare and/or ensure preparation of schedules for planning, design and construction. Monitor schedules and take appropriate actions to ensure that project is completed on schedule and within approved cost limitations, • Provide ongoing interface with contractors, construction managers, local school personnel and Senior Project Officers on project issues; routinely interact with client senior managers on such matters, • Participate in the development and issuance of project procedures and policies; review and make recommendations on client-wide procedures and policies, • Provide guidance and advice to lower-level Project Officers, • Resolve issues and problems raised in field reports made by architects and construction management staff, • Use independent judgment to make on-site change order decisions and have the authority to negotiate with contractors and commit the client's resources on such change orders, • Review contractors claims or disputed work and advise senior management as to appropriate action. Compile contract and project documentation necessary for adjudicating or denying such claims, • Visit various job sites as required in the performance of the above duties, • Bachelor's Degree from an accredited college or university, • Five (5) years of full time, progressively responsible work as a technical specialist in one or more construction and design related fields; two (2) years must involve managing all phases of construction work on a scale and scope similar to the client, • A driver’s license valid in New York State, • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description Just Salad is seeking a construction professional that will join our team. Under the general direction of the Director of Construction, you will oversee all aspects of construction at the project level, including budget forecasting, construction scheduling & administration, and managing third-party vendors, contractors, & consultants. In line with Just Salad’s mission to make everyday health and sustainability possible, you will also support initiatives to reduce Just Salad’s environmental footprint. The person must be located in the NYC tri-state area or NJ and able to commute into our NYC office. Candidates not located in these areas will not be considered. Reports to: Director of Construction This position will be on site in our NYC office Construction Project Manager Responsibilities: • Develops and manages project-specific budget estimates for Real Estate committee approval based on Landlord workletter and existing site conditions., • Supports the Real Estate site selection process and due diligence on potential sites., • Review and redline Construction Documents to ensure Just Salad’s guidelines are met, review for constructability and minimize project change orders., • Consolidates, communicates, and manages all issues and risks affecting construction schedule and budget., • Oversees project-specific bidding process and contract negotiations., • Oversees new construction sites at a regional level to ensure a high level of quality and safety., • Guarantees that all work is executed in accordance with Project Architectural and MEP plans, as well as Just Salad prototype and construction standards., • Provides technical support to General Contractors and Consultants., • Develops and maintains project-specific construction budget and change order log., • Coordinates and monitors construction schedule updates, construction invoices, and submittals., • Develops and maintains relationships with local municipalities to ensure seamless store openings., • Manages inspection process including all approvals required to obtain final Certificate of Occupancy and any other permits/certificates required for opening., • Bachelor of Science in either Mechanical, Electrical, or Plumbing, Construction Management, Architecture, or other related discipline required, • MEP engineer is preferred, • 4-7 years of project experience working in the construction industry required, • Experiences with Quick Service/Fast Casual Restaurants is preferred., • Ability to read and interpret architectural and engineering drawings, • Have a positive spirit and eagerness to take initiative and to take on responsibilities to optimize the team leader’s effectiveness, • Must have exceptional attention to detail and ability to multitask, • Strong organizational and time management skills, and ability to prioritize, • Excellent communication and interpersonal skills, • Strong problem-solving skills and analytical abilities, • Flexible and able to handle multiple projects and tasks simultaneously, • Displays initiative and a strong sense of personal motivation., • Able to travel to assigned markets, • Annual Salary $100,000 - $110,000. Salary dependent on experience. Eligible for up to 15% bonus., • Medical, Dental, and Vision Insurance, • Voluntary Long-Term Disability, Hospital Insurance, Accidental Insurance, Life Insurance + AD & D, • Eligibility to participate in 401K, • Paid Vacation and Holidays, • Pre-Tax Benefits (FSA, HSA, and Commuter Benefits), • Fitness Discounts, • Summer Fridays, • Employee Assistance Program Just Salad is a fast-casual restaurant chain with a mission to make everyday health and sustainability possible. The brand serves craveable, accessible, plant-centric meals made with homemade dressings, prepped-daily produce, from-scratch recipes and fresh, flavorful ingredients. Guests can choose from over 15 chef-designed salads, wraps, warm bowls, market plates, soups and smoothies, including classic offerings and rotating seasonal favorites. Empowering customers to “Eat with Purpose,” Just Salad is a Certified B Corporation™ and home to the world’s largest restaurant reusable program, as well as the first U.S. restaurant chain to carbon label its menu and offer a Climatarian menu category. The company was founded in 2006 and has over 100 locations across New York, New Jersey, Connecticut, Florida, Illinois, Pennsylvania, Massachusetts and Washington D.C.

Job DescriptionRadical AI, Inc. is an artificial intelligence company that is accelerating scientific research & development. We are at the forefront of innovation in the field of materials R&D, a critical driver for advancing our most cutting-edge industries and shaping the future. Breaking away from the traditionally slow and costly R&D process, Radical AI leverages artificial intelligence and machine learning to pioneer generative materials science. This innovative field blends AI, engineering, and materials science, revolutionizing how materials are created and discovered. Radical AI's approach speeds up R&D and addresses global challenges, setting new benchmarks in technology and sustainability. As a Software Engineer in the Robotics and Automation group at Radical AI you will focus on vision and perception systems to design, deploy, and scale robust vision-guided automation in fast-moving lab environments. Your experience and vision will shape both the physical and systematic implementation of lab automation. You will collaborate closely with Roboticists, Mechatronics, Mechanical Engineering and Material Scientists to meet rigorous and sometimes dynamic design requirements at a profound deployment speed. Mission • Design, implement, and deploy 2D and 3D vision systems for robotic manipulation, inspection, state verification, and sensor fusion, • Develop vision-guided automation solutions integrating cameras, lighting, optics, and robots in laboratory and industrial environments, • Implement perception pipelines for object detection, segmentation, pose estimation, and feature extraction, • Own camera calibration, and system-level accuracy validation, • Develop novel algorithms for state estimation of fluids and particle flows, • Integrate vision outputs with robot motion planning, grasping, and task execution, • Tune and harden vision systems for robustness against variability in materials, reflections, and environmental conditions, • Collaborate with software, mechatronics, and mechanical teams to translate experimental and operational needs into automated solutions, • Contribute to technical direction, architecture decisions, and best practices across the robotics, perception, and automation software stack, • Bring an attitude of collaboration and open-mindedness, to facilitate fearless and creative problem solving that empowers our team to ship world class technology at an unprecedented speed.About you, • Master’s, Doctorate (or equivalent experience) degree in Robotics, Computer Vision, Electrical Engineering, Computer Science, or a related field, • 5+ years of experience designing and deploying machine vision systems in robotics or automation environments, • Strong hands-on experience with 2D/3D cameras, lenses, lighting, and optics, • Proficiency in Python and/or C++ for production software development, • Experience with common vision libraries and frameworks, • Experience solving novel computer vision problems, • Experience with simulation, sim2real and domain randomization in a computer vision domain, • Experience integrating vision systems with industrial robots and motion platforms, • Experience with robotic control frameworks (e.g., ROS/ROS2 or equivalent custom systems), • Ability to work independently in a hands-on, development-oriented environment., • Strong communication skills and ability to collaborate across engineering and scientific disciplines.Pluses, • Deep automation experience outside of vision, • Experience in laboratory automation, materials science, or scientific instrumentation, • Prior startup experience or ownership of systems from early prototype through productionWhat we offer, • A competitive compensation package also includes the best in benefits., • Medical, dental, and vision insurance for you and your family, • Mental health and wellness support, • 14+ company holidays per year, • 401K, • Work closely with a team on the cutting edge of AI research. Disclosure Radical AI is committed to equal employment opportunity regardless of race, color, ancestry, national origin, religion, sex, age, sexual orientation, gender identity and expression, marital status, disability, or veteran status.

Job DescriptionVRX, Inc. offers proactive, big-picture thinking and planning, as well as detailed program, project, and asset management. Established in 2006 by longtime construction engineer, Noelle Ibrahim, PE, VRX is a woman-owned professional services firm certified as a WBE and HUB. We provide turnkey services to the public and private sectors. Our specialties include construction management and inspection; construction engineering inspection; resident engineering inspection; civil engineering; bridge and structural design; utility engineering; comprehensive environmental services; and client-focused program and asset management. VRX has more than 215 talented professionals with offices across Texas, Oklahoma, and New York. Learn more at VRXglobal.com Position – Office Engineer Technical Responsibilities • Prepare reports on project status, problems encountered, and overall results, • Knowledge of construction materials, methods, and procedures, • Strong written and oral communication skills, • Provide technical engineering information to project managers and other stakeholders, • Assist in the development of project schedules, budgets, and resource allocation plans, • Coordinate with subcontractors and vendors to ensure timely and quality delivery of goods and services, • Review and approve engineering drawings, specifications, and other project documents, • Conduct site visits to monitor project progress and identify potential issues, • Manage and maintain project files, records, and documentation, • Prepare and submit reports, including progress reports, project status reports, and financial reports, • Coordinate and track project correspondence, including emails, letters, and faxes, • Assist in the preparation of project closeout documents and final reports, • Facilitate meetings, including project meetings, progress meetings, and status updates, • Coordinate, take minutes and write minutes, progress and other NYCDDC scheduled minutes, • Communicate project information and updates to team members, management, and clients, • Manage and maintain project budgets, including tracking expenses and ensuring compliance with budget constraints, • Assist in the preparation of project invoices and payment requests, • Coordinate with accounting and finance teams to ensure accurate and timely payment processing, • Maintain accurate and up-to-date records of project activities, including hours worked, materials used, and equipment rentedEducational Requirements and Experience/ Professional Licenses/Registrations, • Experience on projects for NYCDDC, NYSDOT, NYCDOT, PANYNJ, or MTA is plus., • Bachelor's degree (B. S., or B.A.) in Civil Engineering or Structural / Construction Engineerdiploma or equivalent with 3 - 5 years of experience in Office Engineer., • A valid driver’s license and personal vehicle to travel to and from project sites for site inspections., • Water Main Inspection Certificate, • OSHA 10-hour certification, • ACI certification, • 5 years of construction inspection experience in bridges or roadway work, NYCDDC preferred, • Strong technical and analytical skills, with proficiency in Microsoft Office, and construction management software, • Excellent communication, organizational, and problem-solving skills NOTICE TO THIRD PARTY AGENCIES: Please note that VRX, Inc. does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, VRX, Inc. will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, VRX, Inc. explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of VRX, Inc VRX, Inc. is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.” Powered by JazzHR QNe7XrLyOE

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description PRIMARY FUNCTION/PURPOSE: Under the supervision of the Program Director, the Director of Building Maintenance oversees all maintenance, janitorial, and capital improvement projects for our Lighthouse location in Long Island City, NY. This includes the care, cleaning, and inspection of public spaces within the development such as buildings, grounds, and garbage disposal areas, in accordance with established procedures. This individual will ensure all building systems are maintained in working order, and recruit/interview for vacancies as coordinated by the Human Resources Department. Responsibilities include supervising, scheduling, and assigning duties to the maintenance and janitorial staff, as well as ensuring the building meets all building compliance requirements as defined by DOB, HPD, FDNY and other government authorities. This person must also be on-call for emergencies during off hours and report to the property. MINIMUM QUALIFICATIONS: • An education in the trades and five (5) or more years of experience in facilities and/or residential building maintenance, • Two (2) or more years of supervisory experience and a track record of hiring, developing, and retaining high-performing teams, • A minimum of three (3) or more years of building management experience, with a minimum of two (2) years of shelter experience, • 3-5 years of experience in building construction, maintenance, and repair is preferred, • Must be willing to obtain necessary training and certifications as related to the position and building requirements ESSENTIAL DUTIES AND RESPONSIBILITIES: Maintenance • Oversee all building systems, maintenance, repairs, and modifications, • Observe work operations, procedures and environment to identify possible hazardous conditions or unsafe work practices, formulate corrective measures for safety, • Monitors work orders and ensures repairs are completed within prescribed guidelines, coordinate the completion of repair and close out work orders in Yardi system in accordance with established procedures, • Ensure work performed by staff is completed satisfactorily and follow up on any deficiencies, • Maintain a preventative maintenance schedule and ensure pre-seasonal preparation of HVAC and building systems, • Perform or oversee routine tasks such as plumbing, electrical work, HVAC systems maintenance, and carpentry, • Maintain a Preventative Maintenance schedule and ensure pre-seasonal preparation and maintenance for building systems are carried out as scheduled, • Weighs the pros and cons of different solutions, considering cost, time, and resources, • Adjust, maintain, and clean all machinery and equipment, maintain in compliance with all rules and regulations including heating, plumbing, motors, fans and electrical parts, • Handle emergency repairs quickly to minimize disruptions to the quality of life for clients and staff, • Obtain estimates and quotes for repairs, renovations, and supplies, • Liaise with vendors and service providers for repairs on various projects, • Maintain basement storage areas in an orderly, safe, and hazard-free manner, • Repair or replace inoperable appliances, • Ensure client rooms and common areas are painted as needed, • Maintain exterior parts of the building, ensuring good upkeep for walkways, building face, etc., • Maintain vacancy reports off offline units for repairs and materials needed for turnover; ensure room turnovers are completed within the DHS guidelines, • Manage snow removal, landscaping, and garbage disposal, • Cover shifts with associated duties and tasks, in the absence of staff, • Conduct unannounced site visits during off hours and days, to monitor staff performance and ensure the site is maintained, cleaned, and in good repair, • Will work independently, meet deadlines, multitask, and solve problems, working under a moderate to high degree of pressure, • Provide supervision and document it, taking immediate disciplinary actions when necessary, • Collaborate with AVP and procurement department to obtain bids for building projects, • Follow up on local law requirements, • Be proactive with the ability to take initiative Maintenance and Janitorial Staff • Assign daily maintenance tasks to maintenance and janitorial staff through work order system and follow up through their completion of assigned tasks, • Ensure placement of trash and recyclables on the street for pick up per Department of Sanitation’s schedule for pick up, • Assign janitorial staff to cleaning tasks to keep common areas, lobby, hallways stairwells, elevators, walls, doors, glass fixtures, and floors are clean and well maintained, • Assign janitorial staff to clean vacant rooms, log and store properties left by clients in identified storage area, • Ensure all staff wear proper uniforms, • During cold temperatures, ensure all walkways are free of ice and snow, • In the absence of the custodial staff sweep, mop, dispose of trash, and handle snow removal during inclement weather, • Provide supervision, coaching, and training for staff as needed; ensure staff attend scheduled training, • Attend hearings for any violations as requested Inspections/Record Keeping • Regularly inspect the building and building systems to identify issues and ensure that they are addressed in order to prevent system breakdown, • Inspect the client rooms regularly to ensure rooms are maintained in good repair, • Assign staff to conduct daily and weekly inspections on the safety system and devices such as smoke detector, emergency lights, drainage systems, and fire stop applications, • Accompany government agencies on inspections in the property and immediately report and mitigate citations or violations, • Ensures contracted vendors are inspecting the elevators, back flow, boilers, sprinkler systems, fire panels as outlined in the preventive maintenance contract, • Maintain logs of vendor site visits, • Conduct daily inspection of building exterior, interior of property, safety, and building systems, • Enter all inspections, repairs, and building maintenance issues in the YARDI system Safety • Ensure the property is in compliance with New York City building codes, • Train all staff on OSHA and other safety procedures/practices as prescribed by government authorities, using safety goggles and equipment as needed, • Ensure maintenance and janitorial staff follow safety procedures, ensuring tools, equipment, and materials used for repairs/cleaning solutions are stored properly and not left unattended, • Manage keys, fobs, and other access systems for the clients, • Maintain and inspect safety equipment such as fire extinguishers, sprinklers, and alarm systems, • Maintain Material Safety Data Sheet (MSDS) Vendor Management • Manage vendor contracts to ensure the scope of work as outlined in the agreement is carried out to the executed terms, • Inspects and signs off on completed projects and work, • Immediately reports deficiencies of contracted scope of work, • Secures quotes for scope of work per projects as directed, • Ensures adequacy of contracted services such as exterminating, and other contracted maintenance Inventory • Maintains an inventory of all supplies, tools, and equipment, • Accept deliveries and/or pick up materials and equipment, • Maintain records of packing slips and invoices, • Procures materials needed for repairs, painting, and cleaning for the property, • Maintains an adequate inventory level for all material and supplies; optimizes stock levels and prevents overstock or understock scenarios, • Maintains inventory in a secure and safe space, • Track purchases and usage of inventory through YARDI and other prescribed systems, • Provides detailed reports on inventory levels, trends, turnover rates, and more, • Ensure staff understand how to use the inventory system effectively Client Relations • Respond to all client service requests in a timely manner and maintain accurate records of the work performed, • Ensure staff maintain professional boundaries and respectful communication with tenants, • Listen to client feedback and respond promptly and respectfully to their concerns, • Treat all clients equally and without bias, regardless of personal or cultural differences, • Provide proper notice before entering a client’s unit regarding tenant privacy, • Inform clients of utility and elevator service interruptions OTHER REQUIREMENTS (including Physical Demands): • May be required to work long hours and a varied schedule, • Traveling throughout various locations in the New York City area, • Lifting and moving objects weighing up to 30 pounds several times a week, • Willingness to be flexible as the organization is a 24/7 operation, • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions EEO Statement – Children’s Rescue Fund is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, gender identity, sexual orientation or protected veteran status.

Job Description Hazen and Sawyer is seeking an Assistant Resident Engineer to support the construction of water and wastewater treatment facilities and utilities located in the greater NYC Metro area. The selected candidate will manage the construction, coordination, documentation and inspection activities for various water and wastewater facilities. Responsibilities include assisting project Resident Engineer in all aspects of construction project management including but not limited to the following: • Quality Review of CM team performance and deliverables, • Adherence to contract documents and approved submittals, • Quality review of Inspector Daily Reports, • Quality of CM Administration, • Documentation of project risks, • Processing of contract invoices, • Processing of shop drawings, • Processing of RFIs, • Processing of permits, • Processing of change orders, • Processing of subcontractor approvals, • Management of project documentation tools, i.e. software, • Management, Coordination and Integration with Operating Staff including Maintenance of Facility Operation, • Management of Schedule, • Tracking of Safety, • 5+ years experience, • Bachelor’s degree in engineering or construction management, • Professional Registration (P.E. or E.I.T) preferred, not required, CCM (Certified Construction Manager) also preferred but not required., • Experience in construction management, construction inspection, and stakeholder coordination preferred

Job Description Northern Architectural Systems (“NAS”) is a growth-minded, locally owned and operated company which is dedicated to servicing our customers. We offer high quality, energy-efficient fenestration and building facade solutions to meet the requirements of a demanding market, while remaining environmentally-friendly. Northern Architectural Systems has been recognized by INC Magazine on the list of the top 5000 Fastest Growing Private Companies in America and as one of the top 50 Fastest Growing Companies in New Jersey by NJBIZ Magazine. Overview: We are looking to fulfill our need for a Manufacturing Engineer at our Teterboro, NJ facility. This role will be responsible for assisting our production staff with product design, fabrication, assembly, tooling and materials as well as assisting with scheduling, planning and forecasting. This individual will be accountable for assuring project accuracy and quality from conception to completion. The Manufacturing Engineer must possess exceptional organizational, problem-solving, and communication skills while being results-driven with a keen attention to detail. Requirements Essential Duties and Responsibilities (additional duties may be assigned): • Familiar with work orders, shop drawings, pick tickets, routings, schedules, material labels, part drawings and inspection data records., • Develop a working knowledge of the capabilities for aluminum, plastics, gaskets, glazing and other materials associated with the business, • Assist in the design and development of new products, • Generate a bill of materials (BOM) for the Purchasing and Production departments., • Offer suggestions for changes to documentation, specifications, and/or anything related with the BOM, orders and confirmations, • Participate in group discussions and meetings with management, • Provide assistance in resolving manufacturing challenges, • Enter and maintain operational data such as part numbers, batches, sizes and revision levels in NAS’s systems., • Responsible for developing production documents, managing revisions and communicating changes across various formats and departments., • Assist in maintaining folders and records related to order confirmations, material allocation and order production with the factory., • Ensure all orders are completed in production, according to all quality and technical specifications., • Associate's Degree in Engineering or Bachelor of Engineering degree, • Mechanical engineering knowledge a plus, • 1+ years’ experience as a Mechanical or Manufacturing Engineer or similar position, • Must have basic knowledge of AutoCAD, • Able to read fabrication drawings and knowledgeable in basic measurement methods, • Familiarity with manufacturing operations, • Strong organizational and problem-solving skills, • Able to work under pressure, • Ability to plan and prioritize activities, • Fluency in English, both written and verbal, displaying strong written and oral communications Full-time position Salary Range: $60,000 - $70,000 (commensurate with relevant work experience) Medical, Dental and Vision benefits offered 401(k) PTO (Paid Time Off) Employee Training

Job DescriptionDescriptionStonefield Engineering & Design, a full-service Professional Engineering and Consulting Firm, is recruiting enthusiastic and goal-driven project managers with a minimum of 4 years of experience. Our firm offers a unique career opportunity for candidates as passionate about personal and professional growth as our team is. We are committed to providing the highest level of engineering expertise and customer service to our clients. For those who join the Stonefield team, we provide the tight-knit feel of a small firm while offering unparalleled access to management and opportunities for learning and career advancement. Stonefield provides engineering and consulting services for private developers, universities, and public agencies. We are Site Engineers and Transportation Engineers seeking to expand our boundaries and services at all times. Above all, we are problem-solvers and solution-finders for our clients and the communities we work in. We employ technology – from leading edge communication devices to geographic information system and 3-D modeling software – to provide accurate and easily comprehensible project documents to meet the objectives of our clients. Stonefield Engineering and Design is currently recruiting a Project Manager to join the Traffic Engineering Team. This is a dynamic position that will offer the opportunity for diverse interaction and rapid growth. The right candidate will bring a strong technical background, interpersonal skills, intellectual curiosity, and a desire for continued growth and learning. As Stonefield is a multi-disciplinary firm, interest in cross-disciplinary work within the field of Traffic Engineering, Highway/Roadway Design and Civil Engineering is encouraged. Key ResponsibilitiesJob responsibilities will include teaching and training entry-level to mid-level designers and analysts, preparation of Traffic Impact and Parking Studies, Intersection Capacity Analyses, Design of Traffic Signal and Roadway Improvement Plans, preparation of Maintenance and Traffic Control drawings, creation of Traffic Signal Timing Directives, and development of comprehensive submission and applications to jurisdictional bodies. The position will also include project management responsibilities, zoning and land development permitting, field inspection, hydraulic and preparation of project reports. It is expected that this individual would have the aptitude to, with proper training, attend and present before technical and lay bodies at municipal, county, and state meetings. Skills, Knowledge and ExpertiseWhile there are numerous skills that will assist a new employee – such as knowledge in AutoCAD, signal design abilities, field experience, and technical writing – we are also intrigued by someone who seeks to overcome challenges and to be an innovator within the industry. The following minimum requirements are expected of candidates: • Bachelor of Science degree in Civil Engineering, • Must be a licensed PE, • Minimum of 4 years of experience with traffic engineering capabilities. Experience in the private entitlement of zoning and site plan permitting is preferred, but not required, • Proficiency in Highway Capacity Software and Synchro/SimTraffic, • Ability to work effectively on a team, • Strong communication and organizational skills, • Self-motivated, • Familiarity with NJDOT, NYSDOT, PennDOT Design and Permitting, • Strong communication and organizational skills, • Self-motivated BenefitsAt Stonefield, we believe that our people are our greatest asset. That’s why we’ve built a comprehensive benefits package designed to support your health, well-being, financial future, and overall happiness—both inside and outside of work. Health & Wellness • Robust Health Plans: Comprehensive medical, dental, and vision coverage options to fit your needs., • Wellness Program: Resources and support to help you prioritize your mental, physical, and emotional health., • Fitness Membership: Company-sponsored fitness memberships to keep you active and energized., • Pet Insurance: Options to keep your furry family members protected. Financial Growth • 401(k) & Roth Retirement Plans: Save for your future with pre-tax and post-tax options., • Company Match: Stonefield contributes alongside you to grow your retirement savings faster., • Generous Referral Bonus Program: Earn big when you help us grow our team with talented people. Time Off & Events • Generous PTO Policy: Ample paid time off so you can rest, recharge, and enjoy life outside of work., • Paid Company Events: From ski trips to summer parties, holiday celebrations, and more—we value time spent together as a team. And More We’re always looking for ways to expand and enhance our benefits, ensuring Stonefield remains a place where people can thrive personally and professionally.

Job Description Company: Davey Resource Group, Inc. Locations: Staten Island, NY, Staten Island, NY, Staten Island, NY, Staten Island, NY, Staten Island, NY, Staten Island, NY, Staten Island, NY, Staten Island, NY, Staten Island, NY, Staten Island, NY, Staten Island, NY, Staten Island, NY Additional Locations: Staten Island, NY Work Site: Hybrid Req ID: 220668 Position Overview The Field Engineer supports aerial utility design projects through a combination of field data collection and remote design analysis. This role conducts field audits of electric and telecommunication infrastructure throughout Staten Island, NY (approximately three days per week) and performs pole loading analysis and aerial design work remotely (approximately two days per week). Utilizing GIS and software such as SpidaCalc and Katapult, the Field Engineer develops safe, code-compliant solutions in accordance with National Electric Safety Code (NESC) standards and client specifications. This position requires strong technical aptitude, attention to detail, and the ability to work independently while collaborating effectively with internal teams and external stakeholders. Compensation Data * Starting pay range: $25.00 – $30.00 per hour, based on experience and qualifications. * Company vehicle provided for field-based work. * Monthly cell phone stipend provided. * Travel: Approximately 60% local travel within Staten Island, NY. Potential for overnight travel may be required based on project needs. * All approved business travel expenses are covered in accordance with company policy. Job Duties * Conduct field audits of existing electric and telecommunication utility infrastructure by visually identifying, inspecting, measuring (including use of a fiberglass measuring stick), and accurately recording asset information. * Collect, validate, and document detailed field data using hand-held computers, GPS units, cameras, and other field technology to support aerial utility design work. * Operate as a lone worker when required or as part of a two-person field team, effectively managing assigned production goals, schedules, and work locations. * Utilize GIS, Katapult, SpidaCalc (or similar pole loading analysis software), and other utility design platforms to analyze field data and develop compliant aerial utility design solutions. * Apply engineering principles, National Electric Safety Code (NESC) requirements, and client-specific standards to perform pole loading analysis and ensure safe, code-compliant aerial utility designs. * Identify and maintain accurate records of existing telecommunication and electric utility infrastructure and equipment within designated software and document management systems. * Review and correct data integrity errors within GIS and related databases to ensure accuracy and completeness of design deliverables. * Navigate (in vehicle and on foot) through various terrains and weather conditions utilizing maps, GPS, and other navigation tools. * Drive, operate, and maintain a company vehicle in a variety of terrains and surfaces; ensure proper care and routine inspection of assigned vehicles and equipment. * Positively and effectively communicate with property owners, municipalities, utilities, and internal stakeholders to arrange site access, coordinate project requirements, and support timely project completion. * Recognize unacceptable safety risk conditions and hazards related to field and design work environments, federal standards, and client specifications; comply with all safety regulations and company policies. * Collaborate with Project Managers, Supervisors, Engineers, Designers, Technicians, and Administrative staff to meet production targets, maintain project timelines, and report progress accurately and timely. Qualifications Required: * High school diploma or GED required. * 1–2 years of experience in utility field data collection, utility design, or related infrastructure environment. * Electric hazard identification, electric equipment identification, or communication equipment identification capability. * Experience utilizing GIS platforms and field data collection technology (GPS units, hand-held devices, cameras). * Valid driver’s license along with a clean Motor Vehicle Report. Must attend and pass the Davey Driver’s Safety Course. * Ability to work independently in field environments and navigate various terrains and weather conditions. * Strong attention to detail, organizational skills, and ability to meet production targets and deadlines. * Strong communication skills including written and verbal. Read and comprehend instructions, correspondence, and memos. Draft intelligible, professional, and accurate correspondence. Effectively and clearly communicate and present information in one-on-one and group. * Perform basic arithmetic computations. * Demonstrated proficiency in Microsoft Office applications, Google Workspace, and data entry. Preferred: * Bachelor's or Associate's degree in Engineering Technology, Engineering, or a related technical field. * 3-4 years of experience in utility field data collection, utility design, or related infrastructure environment. * Proficiency in CAD/Outside Plant Engineering design software, and/or PLA software * Familiarity with electric utility design standards (NESC) Additional Information What We Offer [Benefits]: We invest in our employees by offering industry-leading training, technology, and benefits that lead to a rewarding and safe work experience for employees at all levels. • Group health plans*, • Short-term and long-term disability insurance*, • Life insurance*, • Paid parental leave, • 401k with up to a 4% company match**, • Employee Stock Purchase Plan: Opportunity to buy company stock at a 15% discount, • Holidays and paid time off*, • Payroll savings plan*, • Charitable matching gift program*, • Employee referral bonus program*, • Employee Educational Scholarship*, • Davey Family Scholarship*, • 20% discount on all Davey services*, • Cell phone discounts*, • Vehicle purchase discount program*, • Plus, so much more! Utility Asset Management is a division of Davey Resource Group, Inc. (DRG), a Davey company. Davey has been employee-owned since 1979. Our engineering, field services, inspection, and construction teams help keep the world connected, supporting the infrastructure of our electric utility and communications partners. The Davey Tree Expert Company provides research-driven tree services, grounds maintenance and environmental and utility infrastructure consulting for residential, utility, commercial and environmental partners in the U.S. and Canada. We care about our clients, each other and the world around us. We offer the resources, size and stability of a big company while maintaining the culture, entrepreneurial spirit and feel of a small one. We invest in our people, offering industry-leading training, technology, and benefits that lead to a rewarding and safe work experience at all levels. Wherever you want to grow your career, there’s a place for you at Davey. To learn more, visit Davey.com. Accommodations: If requested by employee or otherwise as required by law, reasonable accommodations will be made to enable employees with disabilities to perform essential job functions. If you need assistance at any time, please contact us at 1-877-411-7601 or at . Employment Type: Permanent Job Type: Full Time Travel Expectations: Up to 75%

Job DescriptionCareer Renew is recruiting for one of its clients a Software Engineer (Java Generalist) - this is a fully remote role for US-based or Europe based candidates (if happy to overlap with EST working hours). Salary range: 160-200K USD yearly plus benefits. Are you the kind of engineer who sees performance ceilings as a personal challenge, not a constraint? Do you get more satisfaction from squeezing 30% more throughput out of clean Java than from renting 30% more cloud? Do you dream of writing elegant, handcrafted code that stands the test of time and inspection? If that sounds like you, keep reading. We’re building technologies that haven’t been built before. We're not gluing off-the-shelf components together; we're inventing systems from scratch that must be fast, small, correct, and built to last. Every line of code matters because it deals with people’s money and gets recorded publicly on an immutable ledger. In a world where most engineers are encouraged to "move fast and break things," we’re a rare company where correctness, performance, and efficiency are the business model. Like NASA engineers launching rockets on 16-bit computers, we move fast and get it 100% right the first time. This is a rare opportunity to be part of a small, elite team where you won’t be a tiny cog in a vast machine–you’ll be the person building the machine. If you're an engineer who loves puzzles, gets excited by new challenges, and wants to write software that really matters, this is the role for you. You may be doing all of the following: * Inventing new protocols, data structures, and algorithms to solve problems no one else has tackled before * Designing and writing low-latency, high-throughput Java systems from scratch * Tuning memory usage down to the byte, and measuring performance down to the nanosecond * Writing parsers, interpreters, and other core infrastructure from first principles * Mentoring senior and staff engineers while leading complex technical initiatives * Creating tools and profilers to measure and improve execution across the stack * Making design decisions that will affect the architecture and correctness of a publicly visible ledger * Switching fluently between system-level design and single-instruction-level optimization * Building tests and harnesses that help ensure nothing ever breaks, ever Qualification Requirements: * 10+ years of professional software development experience * Deep mastery of Java and the JVM: memory models, threading, GC behavior, and performance profiling * Experience with parsers, interpreters, compilers, or other language tooling * Demonstrated ability to write and optimize high-performance code with minimal dependencies * Strong grasp of computer science fundamentals such as data structures, algorithms, concurrency, etc. * Significant experience building systems where performance and correctness are non-negotiable * Ability to build from scratch–given just an IDE and the JDK, you can deliver a working, high-performance server * Experience with tools like JMH, PBJ, async-profiler, JFR, Solo, YourKit, or similar * Having a passion for code quality, system design, and doing things the right way * Master’s degree in Computer Science (or equivalent experience) Other skills that are great to bring with you but that we can help you develop: * Experience in distributed systems and/or blockchain * Knowledge of cryptographic tools, libraries, and primitives (e.g., hashes, public/private keys) * Familiarity with web3 tools or smart contract platforms (especially EVM) * Experience with event-driven architectures or high-frequency trading systems * Understanding of test-driven development and continuous integration practices Let us be blunt; this is not an easy job. It’s not for those who want to tick boxes or copy and paste code from Stack Overflow. But if you love crafting brilliant systems, solving deep technical puzzles, and building something that truly matters, it may just be the best job you’ll ever have. Come build the future with us as we accelerate the digital economy.

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Construction Manager with proven experience and expertise in Bridge/Rail projects. The Senior Construction Manager will oversee a multidisciplinary team and lead the project through preconstruction to commissioning for a multi-million dollar bridge repair project. Responsibilities • Lead overall construction planning, scheduling, and execution for major bridge and rail projects., • Apply expert level of knowledge of construction means and methods, materials and techniques for bridge repair., • Manage field operations, subcontractors, and project engineering staff to ensure work is completed safely, on time, and within budget., • Oversee coordination with rail agencies, transportation authorities, utility providers, and other stakeholders., • Review design documents, shop drawings, and technical specifications to ensure compliance and constructability., • Implement and enforce safety programs, quality control procedures, and risk-management strategies., • Ensures adherence to contract terms, performance, quality assurance, compliance requirements, and engineering specifications., • Prepare progress reports, cost forecasts, and change-order documentation., • Serve as the primary on-site project leader, maintaining strong communication with clients, consultants, and internal teams., • Establishes work plan and multidisciplinary staffing of the project and arranges for assignment of project personnel., • Mentor junior staff and contribute to long-term workforce development. Qualifications • Bachelor’s degree in Construction Management, Civil Engineering, or related field (Master’s preferred)., • Active New Jersey Professional Engineer (PE) License is required., • 20+ years of construction project management experience with expert level knowledge of bridge and/or rail projects., • Minimum of 7+ years in a supervisory role, • Management of at least three (3) bridge construction or rehabilitation projects and one (1) completed project involving railroad infrastructure within an active railroad environment., • Strong understanding of track work, rail operations, bridge structures, and applicable codes and standards., • Proven track record of delivering multi-million-dollar transportation projects., • Expertise in project scheduling software (e.g., Primavera P6), document controls, and cost management tools., • Exceptional leadership, communication, and problem-solving skills., • Ability to work in a fast-paced environment and manage multiple priorities. BenefitsNaik offers a competitive compensation package including: • Generous sign-on bonus, • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description Apartment Repair and Maintenance Worker, must be able to start ASAP! We have partnered with a 130-unit apartment complex in East Orange who is in need of extra help in the Maintenance Department to handle Maintenance Orders and Turnovers. Major Responsibilities • Hands plumbing, electrical, boilers, painting, carpentry, snow removal, landscaping and appliance repair, • Must be willing to complete janitorial duties including general common area and grounds upkeep, garbage removal, • Ideally someone with affordable housing/REAC inspection experience but not required. Location: East Orange, NJ Job Requirements: • 1-2 years of maintenance experience required, • 1-2 years of repair work experience required, • Experience with apartment/home repair #zip

Job Description ABOUT CITY HARVEST: City Harvest is New York’s first and largest food rescue organization, helping to feed millions of New Yorkers who struggle to put meals on their tables. During our 40 years serving New Yorkers in need, we have rescued more than one billion pounds of fresh, nutritious food and delivered it free of charge to hundreds of food pantries, soup kitchens, community partners, and our own Mobile Markets across the five boroughs. This year, we will rescue and distribute more than 86 million pounds of nutritious food to our neighbors in need. City Harvest works alongside our community partners to boost community capacity, expand nutrition education, and strengthen local food systems. Since our founding in 1982, City Harvest has always been there to feed our city one day, one meal, one New Yorker at a time. Reporting to the Warehouse Manager, the Repack Distribution Center Associate is responsible for directing repack/volunteer workflow, providing warehouse administrative support and supporting warehouse needs as laid out by Warehouse Management. The Repack Distribution Center Associate will assist with volunteer/Doner support by moving, storing, documenting product and systematically processing repacks with use of material handling equipment as directed. PRIMARY RESPONSIBILITIES: • Responsible in setting up, supporting and processing daily repacks, • Provide strong administration support in line with warehouse needs, complete daily deadlines and critical reports, • Load and unload trucks/pull and put away product as directed. Ship and receive product based on customer orders efficiently and accurately., • Conduct inspection of goods for damages, report and document findings. Reports accurate reconcile of delivery with shipper’s Bill of Lading., • Ensure that product is stored in appropriate areas of the facility. Manage inventory based on FEFO (first expire-first out) guidelines when applicable. Maintain warehouse equipment and document daily pre and post inspections., • Maintain warehouse sanitation. Perform routine warehouse maintenance. Clean warehouse and grounds as directed., • Ensure accurate warehouse inventory, reconcile discrepancies and update systems, • Adhere to all AIB and OSHA standards Requirements: • High school diploma or equivalency required, • 2-4 years warehouse experience required, • Prior warehouse experience within the food industry preferred, • Experience with inventory management software required, • Familiarity with handheld scanning systems and WMS systems, • Efficient in office 365, • Ability to operate a stand on pallet jack and sit-down forklift, • Proficient in operating a reach truck required, • Strong customer service skills, • Work schedule will vary week to week, some days will require 10 hours to complete repack tasks. Some Saturdays will be mandatory. PHYSICAL REQUIREMENTS/WORK ENVIRONMENT: • Ability to lift 50+ lbs., • Regularly required to speak clearly and hear the spoken word well., • Regularly required to physically operate routine equipment, such computers, calculator, etc., • Regularly required to work irregular hours, • Regularly required to utilize near vision ability to read data and documents, including spreadsheets and reports, in printed form and on computer screens., • Regularly required to move fingers, wrist, arms, legs and feet in a repetitive manner as necessary to operate tools and equipment. At City Harvest, we enjoy working in a team-based environment and value the benefits of a diversified workplace. City Harvest is an equal employment opportunity employer.

Job Description ABOUT US Indie Campers, the go-to campervan Marketplace, is on a mission of making road trips available to everyone. Thanks to its digital approach and customer-centric orientation, Indie Campers has developed a strong booking experience and high-quality road trips at affordable prices. With over one million nights rented through our travel platform, we have welcomed more than 300,000 travelers from 169 countries. We offer a comprehensive and expanding array of road trip possibilities: short-term RV rentals, long-term campervan subscriptions, and the possibility of buying one of our vehicles available for sale. Rooted in a deep technological focus, our challenges are both exciting and demanding and require top talent and motivation to be successfully pursued. We are growing our team and looking for those interested in pursuing this dream with us and joining an ever-developing journey. THE ROLE We are looking for skilled and passionate individuals who excel in craftsmanship, mechanics, and hands-on problem-solving to join our team as an RV Maintenance Mechanic at our depot. This role is critical to ensuring our fleet of campervans is maintained at the highest standards, enabling our customers to embark on unforgettable journeys. As an RV Maintenance Mechanic, you will be part of our team and work with the Central Europe Regional Team and your primary responsibility is to maintain our campervans available at all times and at the highest possible condition, contributing to an efficient operation and customer satisfaction. This is an opportunity to use your unique technical skills to deliver exceptional service and create meaningful impact. If you like solving mechanical problems, having immediate impact on objectives and are motivated to be part of a mission-driven team, we invite you to bring your expertise to our organization. WHAT WILL YOU WORK ON? Reporting directly to the the local leader, your primary responsibility will be executing all processes and procedures related to that objective, namely: • Conduct systematic inspection to vehicles and diagnose problems on vehicles' mechanical, electrical, heating, and water systems., • Perform maintenance and repairs on campervans and motorhomes, including:, • Preventive and corrective maintenance, • Light bodywork repairs that involve spare parts replacement (lightbulbs, windows, side mirrors), • Campervan spare parts substitution and repairs, • Campervan appliances troubleshooting and repairs, • Maintain and develop the relationships with external partners, • Coordinating the execution of vehicles' interventions with external suppliers and regional teams, • Maintain all vehicle information systems updated according to the established procedures, • Move campervans to and from local vendors, parking facilities or other depots, • Maintain depot equipment and spare parts organized and clean, • Maintain spare parts inventory systems updated at all times, • As part of the local team, you will also be part of the daily operations of the depot and will execute tasks related to that effect, namely:, • Preparation of vehicles and equipment for customers, • Assist with handling incoming reservations, welcoming guests and taking care of check-ins and check-outs, • Receive and collect shipments and supplies, organize them in storage area, register item consumption and new orders, • Maintain depot equipment, extras and consumables stored at the depot WHO ARE WE LOOKING FOR? • Education or certified training in mechanics, mechatronics technical or a similar program in the automotive industry, • At least 1+ years of experience with hands-on mechanical and electrical repairs - experience in campervans is a plus, • You must have a high school diploma or equivalent. Technical degree preferred, • Available to work weekends and holidays, • Valid Driver's License, • English proficiency, and good communication skills THE INDIE COMMITMENT! • Being part of a young, fast-growing and innovative company where you make a difference;, • Career development opportunities in Field Operations;, • Continuous training and coaching to develop the skills that matter to you;, • Compensation package that includes Performance and Referral Bonuses;, • Free Road Trips so that you can experience Indie firsthand trips around North America, Europe and Oceania, • Base pay of $21 + bonuses Are you ready to Go Indie?

Job Description Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity’s Built Environment division, combining its deep expertise in high-performance building systems with Trinity’s strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B’s capabilities and offers employees: * Access to a broader portfolio of international projects and clients * Enhanced career mobility across Trinity’s global network * Interdisciplinary collaboration with experts in sustainability, environmental science, and digital infrastructure About the Role We are seeking a technically skilled and experienced Project Engineer to join our Field department in our New York office. A professional who has developed strong abilities in communication, coordination, project management, and leadership. This role requires an individual who can effectively manage and oversee various aspects of engineering projects, ensuring that all technical requirements and project objectives are met efficiently. Key Responsibilities • Interpret and analyze construction documents and industry standards, • Develop and implement project-specific inspection and test scripts for multidisciplinary systems, • Direct and record equipment and system level testing, documenting discrepancies, • Review and apply local building codes and certification requirements (e.g., LEED, WELL, ASHRAE), • Conduct site surveys, inspections, and gather technical data using various instrument, • Prepare technical field reports, recommendations, and project documentation, • Coordinate on-site activities and project documentation with stakeholders, including clients, construction managers, and vendors, • Participate in client meetings, team functions, and respond to client inquiries, • Manage cloud-based project modules and datasets for complex projects, • Continually improve document templates and procedures; support strategic service sector meetings., • Ensure timely assembly and distribution of project documentation and meet deadlines consistentlyMinimum Qualifications, • Bachelor's degree in Engineering or related discipline from an ABET accredited program, • Minimum 3+ years of relevant experience or Senior Engineer competencies, • Professional certification (e.g., LEED,CCP,CEM), • Knowledge of MEP design software (e.g., Revit, AutoCAD) and building codes, • Experience with project documentation across all deliverable phases Legacy + Innovation: Our company blends a rich history with forward-thinking design, including smart building systems and deep carbon reduction strategies. * Collaborative Culture: With over 400 professionals, our company fosters mentorship, teamwork, and continuous learning. * Global Impact: Now part of Trinity, our company offers opportunities to work on transformative projects across commercial, healthcare, aviation, life sciences, and data center sectors. * Multiple office locations: New York, Boston and Philadelphia. What We Offer * Hybrid workplace offering the flexibility to work both from home and the office * Comprehensive benefits package including 401k employer match and stock options * Paid time off (PTO), volunteer program and employee resource groups * Training and professional development courses through JB&B University Estimated compensation range: $93,000 - $100,000 Jaros, Baum & Bolles is an equal-opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR F4HEVl1rMV

Job Description Employment Type: Full-Time FSLA: Salary/Exempt Division: Arch Energy Department: Arch Energy / Direct Purchase Reports to: Project Executive / Director of Strategic Sourcing Supervisory Duties: Yes The Arch Energy Direct Purchase Regional Lead - Project Manager (DPRL-PM) will serve as a main point of contact for regional stakeholders, including Regional Directors, Project Executives, Owners, OPMs, Developers, Architects, Engineers and Subcontractors. The DPRL-PM is responsible for oversight of Direct Purchase responsibilities in a region, and the scope / packages full life cycle including early engagement, purchasing, recommendation, award, budget, cost, schedule, risk management, resource management, quality and safety while providing exceptional customer service. The DPRL-PM will oversee the implementation of a Raving Fans action plan and play a key role in business development including networking events, marketing initiatives, proposal preparation and interviews. Responsibilities / Essential Functions • Involvement and early engagement in project preconstruction process, • Provision of initial Direct Purchase equipment budgetary and lead time information to project, • Direct Purchase scope demarcation, constructability review and confirmation of final scope, • With project team and legal, identification of project Owner flow-down requirements, • Direct Purchase Vendor identification, • Request for Proposal (RFP) preparation and issuance, • Request for Information (RFI) coordination, • RFP response review and descoping sessions, • Bid levelling, risk identification and mitigation proposals, • Direct Purchase Recommendations, • Material Purchase Order awards, • Project & Vendor kick-off meetings, • Submittal expediting, review, comment coordination and approval, • Scope release and on-going expediting, • Review of updated project documentation and drawings to identify scope changes, • Management of changes as appropriate, • Equipment inspection and testing coordination, • Equipment transportation and storage coordination, • Coordination of vendor support for installation and start-up, • Coordination of Warranty certificates and work as needed, • Coordination of final For Record (FR) documentation, • Package Close-out, lesson learnt and feedback, • Project feedback (Raving Fans), • Updating systems to ensure accurate status of package, • Overall management of package / Direct Purchase regional financials, including cost reporting, monthly requisitions, review and approval of invoices, ensure timely completion, management of the requisition process to maintain cash flow throughout the project and address/communicate issues proactively and promptly., • Working with wider Direct Purchase team to ensure Standard Operating Procedures (SOP) are updated and fit for purpose, • Representing and being primary point of contact for Direct Purchase within specified region. Includes attending regional meetings as appropriate., • Representing Direct Purchase, and wider Arch Energy / Consigli business, in external events, • Mentor & manage multiple team members, • ·Provide evaluation(s) of team members on performance and identify training needs. Conduct training and development of others., • Perform safety walks with field and safety staff and record observations., • Assist in preparation and present at interviews for project pursuits., • Take lead in the development and management of optimal project profit opportunities Key Skills • Strong communication skills., • Strong initiative and problem-solving abilities., • Ability to multi-task and self-prioritize., • Intrinsically Motivated and driven., • Ability to work in a team environment with a primary focus on collaboration., • Strong written and verbal presentation skills., • Ability to review, understand and support all change management processes., • Strong negotiation skills, • Ability to understand conditions of contracts Required Experience • A Bachelor's degree in Engineering, Construction Management or Architecture preferred., • 5+ years of experience within the construction industry in full lifecycle purchasing, project management or similar role., • Vendor management experience., • OSHA-10 and OSHA-30 preferred., • Additional proficiencies may include cost management software (Timberline, Sage preferred), scheduling software (Primavera P6 preferred) and construction management software (Procore preferred).

Job Description About the Role The Engineering group at AKRF is seeking a Geotechnical Engineer to be based out of New York City. The potential candidate will have the opportunity to work in an environment of encouragement and collaboration to help AKRF shape the future of our communities. Job Responsibilities: • Providing geotechnical oversight and logging of geotechnical explorations (borings, test pits, CPTs);, • Developing laboratory and field testing programs;, • Preparing engineering reports, including the evaluation of collected field and laboratory results, preparation of figures and drawings;, • Preparing engineering analyses for slope stability, settlement and consolidation estimates, deep foundation design (compressive, uplift, and lateral capacities), mat foundation design, ground surcharging, and ground improvement techniques (soil grouting, ground freezing, etc.), and soil liquefaction;, • Management of multiple projects (prior project management skills a plus);, • Working knowledge and related field experience regarding foundation-related construction in urban areas;, • 8-12 years’ experience, • Bachelor’s degree in civil engineering (a master’s degree with a concentration in Geotechnical Engineering is a plus)., • Engineer-In-Training Certificate, • NYS PE licensure preferred, PE licensure in other states will be required to obtain NYS licensure within 6 months of hire., • Required to travel to work sites in New York City, Long Island, the Hudson Valley, Connecticut and New Jersey, with work being performed Monday through Friday with the possibility of occasional overtime, evening, and weekend work., • OSHA 10-hr or 40-hour HAZWOPER training a plus. Compensation will range from $120k to $150K, and commensurate with experience. Why Work at AKRF Founded in 1981, AKRF is an award-winning consulting firm with 400 planners, engineers, designers, economists, ecologists, geologists, historians, archaeologists, acousticians, and many other types of professionals guided by the belief that to be original is to be transformative. Professionals join and remain at AKRF for our corporate-casual environment that values flexible work schedules and locations, and balances award-winning projects with social impact initiatives, charitable giving, and plenty of fun and games. We foster a diverse, equitable, and inclusive environment where employees are respected and valued in honor of their identities; we strive to deliver on this promise every day. Our cookie exchanges and ice cream socials are quite the treat. What We Offer We provide employees with a benefit package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The benefits program at AKRF includes: • Medical, Dental, Vision insurance, • Vacation and Sick time, • Flexible work schedules and locations, • 401(k) retirement plan with employer matching, • Additional Voluntary Life Insurance, • Short- and Long-Term Disability, • Stock Ownership, • Tuition Reimbursement, • Training and professional development courses, • Opportunities for community outreach through internal networks, • Charitable donation match AKRF enforces a policy of equal employment opportunity in our daily operations. The firm has a demonstrated history of hiring, training, developing, promoting and retaining minority group members and women. All employment-related decisions are based solely on relevant criteria and without regard to race, color, religion, age, sex, pregnancy, national origin, age, physical or mental disability, marital status, sexual orientation, sexual identity, caregiver status, military/veteran status or citizenship status, or any other character