Trabajos inspector en Lexington, KentuckyCrear alertas

Job DescriptionCompany: US0011 Sysco Louisville, Inc.Sales Territory: NoneZip Code: 40504Travel Percentage: 0 COMPENSATION INFORMATION:The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors.PAY - $25 - $28 per hour based on experience SCHEDULE: 2ND SHIFT Monday through Friday, 2:00 PM - 10:30 PM (and morning coverage every 6th Saturday from 4:00AM to 12:30PM) SHIFT DIFFERENTIAL - $2 shift differential for second shift$600.00 Tool allowance$275 Annual Boot voucher yearlyOutstanding benefits - www.syscobenefits.comExcellent full time career with a stable and growing companyMove your Career FORWARD with SYSCO FOODS! JOB SUMMARYTo provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES: • Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet., • Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies)., • Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment., • Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment., • Address all Driver Vehicle Inspection Report write ups timely, and efficiently., • Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems., • Follow procedures including documenting all work performed on work orders., • Learn and develop efficiency in Sysco computer programs., • Proficient in electrical meter testing., • Knowledge of controls and electric (DC (distribution center) low voltage., • Electric motor knowledge (DC)., • Complete electrical repairs and welding projects as needed. QUALIFICATIONS:Education: • Medium / Heavy Duty truck technical training., • High school diploma or GED required.Experience:, • 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair., • Current and valid driver's license.Certifications, Licenses, and Registrations:, • Annual Inspector Certification, Knowledge, Skills, and Abilities., • Brake Inspector Certification, Knowledge, Skills and Abilities., • ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required)., • 609 HVAC Certification.Professional Skills:, • Working knowledge of computer-based diagnostic software for OEM's and component manufacturers., • Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics., • Expert knowledge and skill of all vehicle systems and components., • Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment., • Moderate knowledge and skill in Preventive Maintenance Inspections and repair., • Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG)., • Basic computer skills and knowledge., • Moderate knowledge of all DOT (FMCSA) regulations., • Basic knowledge of OSHA safety regulations., • Basic knowledge of environmental regulations., • The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus., • Ability to operate various pieces of equipment., • Ability to stand, sit, walk, bend, reach., • Ability to push/pull., • Ability to lift /carry., • Ability to grasp tools., • Ability to perform Repetitive motion: wrenches and hand tools. Physical Demands: • While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear., • The employee is frequently required to sit and reach with hands and arms., • The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl., • The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment: • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces., • The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call., • The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.)., • The associate is occasionally exposed to high, precarious places and confined spaces., • The associate is occasionally exposed to fumes or airborne particles., • The noise level in the work environment is usually moderate., • Frequently works outdoors. BENEFITS INFORMATION: For information on Sysco’s Benefits, please visit https://SyscoBenefits.com OVERVIEW:Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT:Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Job Description Entry-Level Construction Materials Testing (CMT) Professional Requisition Number: 2026-1830-11 Are you a construction professional seeking a role that offers exposure to a wide range of projects, hands‑on learning, and clear opportunities for professional growth? S&ME is looking for an eager and dedicated full-time Construction Materials Testing (CMT) Professional to join our Construction Services team in Lexington, Kentucky. Build Your Career. Own Your Future. At S&ME, you're more than just an employee; you're an employee-owner of a 100% employee-owned company that has been solving complex geotechnical, civil, environmental, and construction materials testing challenges for over 50 years. We're invested in your success and offer a career path with growth opportunities, training, and hands-on experience. Join a team that values safety, integrity, and teamwork while offering industry-leading benefits designed to help you thrive - on and off the job, including but not limited to: • Medical, Dental & Vision Plans with HSA and FSA options, • 100% Employee Stock Ownership Plan (ESOP) with a minimum 5% company contribution & automatic enrollment, no matter your role, • 401(k) Retirement Plan, • Paid Holidays and Paid Time Off (PTO) - with rollover options, • Paid Maternity & Parental Leave, • Pet Insurance, • Mentorship & Career Development Programs, • Credential Incentive Program - get rewarded for advancing your skills, • Tuition Reimbursement, • Employee Recognition Program, • Company Vehicle & Fuel Card - for project-based roles, • $2,000 Employee Referral Bonuses - and more! Your Role: Hands-On, Impactful, and Fast-Paced As an entry-level Construction Materials Testing (CMT) Professional, you are vital in guaranteeing the integrity and safety of construction endeavors by evaluating and confirming the characteristics and quality of materials used. Working under the supervision of senior staff, you will coordinate and execute field explorations, field logging of soil samples, perform engineering calculations/design, prepare proposals and reports, and provide project and client support. What You'll Do: • Testing construction materials: Perform tests and oversee special inspections of materials such as soil, concrete, asphalt, and others to ensure they meet project specifications and industry standards., • Analyzing construction plans and specifications: Verify that they align with project goals before conducting field observations., • Recording and managing field activities: Document detailed observations and test results during project execution, using Metafield® or other management systems daily for efficient data handling and coordination., • Preparing reports and proposals: Help draft reports and proposals for smaller projects, ensuring thorough and accurate assessments and documentation., • Communicating daily: Interact with management, contractors, and clients to maintain project transparency and provide regular updates on progress. Experience shifting work hours based on project needs and weather conditions, including early mornings, late evenings, weekends, and overtime (paid at time and a half). What We're Looking For: • Bachelor's degree in Civil or Geotechnical Engineering, Construction Management, or a similar technical field, or an equivalent combination of education and experience, • 0-2 years of experience in construction materials testing/inspecting soil, concrete, masonry, and/or asphalt, • Understanding that within 6 months of hiring, must obtain at least 1 certification associated with the type of duties and responsibilities assigned, • Active Construction Materials industry certifications such as: American Concrete Institute (ACI): Field Testing Grade I; Strength Testing Technician; Laboratory Technician; International Code Council (ICC): Special Inspector (Reinforced Concrete, Masonry, Soils), • Basic math and communication skills (speaking, reading, and writing) using the English language, • Understanding of a fluctuating weekly schedule and occasional travel is possible What to Expect: With the use of Company-provided Personal Protective Equipment (PPE). • Outdoor, hands-on work in all weather conditions, • Walking over rough terrain and standing for long periods (up to 12 hours), • Lifting and carrying 40-50 lbs. of materials and equipment, • Safely handling field tools and maneuvering equipment on active construction sites Why Join Us? At S&ME, your career growth matters; you matter. You'll receive professional training, mentorship, and support to work on challenging projects and be part of a company that truly invests in its people. Every employee benefits from our employee-ownership program, no matter your role. This is more than a job; it's a chance to build a long-term career in the engineering and construction industry. Ready to Get Started? Apply today and take the first step toward an exciting future with S&ME! Third Party Staffing Agency Policy: No agency, recruiter, or search firm may submit candidate information to S&ME without a current written agreement and prior authorization from S&ME Talent Acquisition. Unsolicited submissions are deemed non-confidential and non-proprietary and will not create any contractual obligation, candidate ownership rights, referral rights, placement rights, or fee liability. S&ME expressly rejects any terms and conditions included with unsolicited submissions and reserves the unrestricted right to recruit, hire, or engage any candidate without compensation to the submitting party. This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Standard Job Description The Quality Inspector is responsible for delivering comprehensive quality assurance, inspection, testing, and sustainment services supporting the SOF GLSS contract. This role oversees compliance across mechanical, structural, and electrical disciplines from induction through final delivery. Responsibilities 1. Electrical & Avionics Systems Inspect and verify electrical/electronic wiring harnesses, cables, fiber optics, tubing, circuit panels, and subassemblies. Verify harness routing, bend radii, clamping, and contractual clearances against engineering documentation. Conduct dimensional inspections in accordance with industry standards and company quality procedures. Inspect and verify the avionics systems are operational in accordinance with the operators manual and specified technical data. 1. Structural & Mechanical Systems Inspect structural, hydraulic, pneumatic, mechanical, and flight-control assemblies and bench build-ups for workmanship, drawing compliance, and specifications. Verify mating, framing, skinning, fasteners and riveting operations on airframes, fuselage sections, flight-control surfaces, and rotor blades. Conduct regular and superficial hardness testing to verify heat-treatment and material properties. 1. Modification Kits & Material Verification Audit and inventory aircraft modification kits and hardware against Bills of Material (BOMs), engineering drawings, schematics, and work packages. 1. Surface Prep, Paint & Markings Inspect aircraft prior to, during, and after washing, chemical stripping, surface preparation, and painting. Ensure approved chemicals, primers, topcoats, and process specifications are strictly utilized. Verify external markings, and decals for accurate dimensions, placement, and materials. 1. Final Integration, Acceptance & Final Delivery Perform progressive and comprehensive compartment-by-compartment inspections of completed aircraft for FOD, tool control, completeness, clearances, and freedom of movement. Verify final assembly, component mating, system integration, and operational checkouts through final acceptance. Assist with or conduct aircraft weight-and-balance procedures utilizing certified scale kits and automated recording systems. Identify, document, and quarantine non-conforming items; initiate Non-Conformance Reports (NCRs) and collaborate on Material Review Board dispositions. Conduct internal process audits and work-instruction compliance checks under general supervision. Basic Qualifications • Quality assurance/inspection experience within aviation or aerospace environment., • Direct operational military experience, such as scheduled or maintenance inspections, or equivalent, in lieu of the quality experience., • Demonstrated ability to read and interpret engineering drawings, schematics, and technical specifications. Hand-on proficiency in executing inspection/test methodologies using standard metrology and inspection tooling (including calipers, micrometers, and multimeters)., • Demonstrated ability to input, track, and document inspection and test results in enterprise resource planning, maintenance management systems, and/or standard computer databases (e.g., Microsoft Excel)., • Ability to read, write, and clearly communicate technical information, and work collaboratively within a multidisciplinary production team. Desired Skills • In-depth knowledge of Special Operations H-47, H-6, and H-60 aircraft systems., • Practical experience with Quality Management System (QMS) internal-audit processes; formal audit training preferred., • Ability to evaluate process compliance; write and review reports; perform root-cause analysis; and validate quality processes, responses, and plans., • Experience inspecting aircraft ground-handling and servicing activities; component removal and replacement; scheduled and unscheduled maintenance; aviation safety-message compliance; Modification Work Order (MWO) execution; and Time Compliance Technical Order (TCTO) execution., • Aircraft weight-and-balance training or certification., • In-depth knowledge of aircraft historical records., • Effective communication skills for coordination with managers and supervisors, Field Service Representatives, systems engineers, maintenance logistics support managers, and customers, including the Defense Contract Management Agency (DCMA)., • Experience working with maintainers, instrumentation system integration engineers, and other stakeholders to resolve quality issues; conduct deficiency analysis and reporting; address customer complaints; and resolve other quality-related issues as they arise., • Ability to conduct incident and/or mishap investigations and audits., • Prepares quality documentation and reports by collecting, analyzing, and summarizing information and trends related to failed processes, recalls, corrective actions, and validation activities., • Capable of conducting teleconferences and briefings/presentations for management and customers., • Excellent organizational, administrative, and computer skills, including proficiency with the Microsoft Office Suite., • Must possess an active Secret security clearance or have the ability to obtain and maintain one. Pay Information • $37.49 - $37.49 At Lockheed Martin, we know mission success starts with taking care of our people. Our Total Rewards program is designed to attract top talent, support your well-being, and help you grow-both professionally and personally. The salary range for this position is as listed on the requisition. Please note that the salary information listed is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market(work location) and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Flexible work arrangements and schedules (e.g., 4x10), 401(k) match, Paid time off, Holidays, Parental Leave, EAP, Flexible Spending Accounts, Education Assistance, Life Insurance, Short-Term Disability, and Long-Term Disability. • Additional specific benefits are dependent upon the business unit and the collective-bargaining agreement., • Annual short-term and/or long-term incentive compensation programs may be offered depending on the position. Payments under these annual programs are not guaranteed and can vary from year to year and are tied to a range of performance metrics., • For (Washington state applicants only) Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.

The Calling Somewhere tonight, a cold start is creeping through a production function. A memory leak is feeding on a container that nobody has looked at in months. A long-lived credential sits in a forgotten config file, waiting. Safience builds identity intelligence for the people who find missing children and stop real threats. When an investigator needs an answer, our systems cannot go dark. So we need an engineer who stands the watch. You will design, build, and operate Node.js services on AWS Lambda and Docker-based containers. Fastify is your blade. Vue.js is your shield. Terraform is your book of wards. You own services end to end: the code, the infrastructure, the pipelines, the lanterns that light every corridor, and the 3 a.m. page when something stirs. You set the direction for serverless and containerized workloads across a multi-account AWS realm, and you make every engineer around you sharper through review, documentation, and mentorship. Sacred DutiesForging the Weapons (Application Development) • Forge production Node.js services in TypeScript with Fastify and Vue.js, deployed as Lambda functions (zip and container-image packaging) and as containers on ECS/Fargate., • Raise event-driven defenses with API Gateway, SQS, SNS, EventBridge, Step Functions, and DynamoDB/Kinesis streams. Messages move like sentries passing the watchword., • Write idempotent, retry-safe handlers. A message that returns from the dead should find nothing to repeat. You decide what happens in the dead-letter queue, and you report partial batch failures honestly., • Banish the cold start. Shrink bundles, tune memory and timeouts, and set concurrency and provisioned concurrency so performance and cost both stay in the light.Raising the Walls (Infrastructure & Containers), • Inscribe the wards in Terraform: remote state, modular design, and no change goes live without a second pair of eyes., • Build lean, hardened Docker images with multi-stage builds, pinned base images, deterministic installs, and non-root users. Nothing runs as root in this house., • Tend the image crypt in Amazon ECR: tagging strategy, vulnerability scanning, and retention policies. Old images are laid to rest on schedule., • Patrol multiple AWS accounts with cross-account IAM roles and least-privilege policies. No spirit gets a skeleton key.Sealing the Gates (CI/CD & Release Engineering), • Own GitHub Actions pipelines for build, test, scan, and deploy, using OIDC federation to AWS. Long-lived credentials are how the darkness gets in., • Deploy with discipline: Lambda aliases and versions with weighted traffic shifting, ECS rolling or blue/green deployments, and automated rollback on alarm. When the bell rings, we retreat in good order., • Guard the supply lines with lockfiles, private package registries, and automated vulnerability and license scanning. Nothing enters the camp unexamined.Keeping Watch (Observability & Operations), • Instrument everything with structured logging, metrics, and distributed tracing (CloudWatch and/or OpenTelemetry). Shadows hide where logs are missing., • Define SLOs, alarms, and dashboards. Take your turn on the on-call rotation, lead incident response, and run blameless postmortems. We hunt the cause, never the person., • Watch the AWS bill for the services you own. Waste is a slow haunting.Wards and Seals (Security), • Keep secrets in AWS Secrets Manager and SSM Parameter Store, encrypted with KMS. Secrets are never spoken aloud or written in plain text., • Secure the network paths for VPC-attached Lambdas and Fargate tasks: subnets, security groups, VPC endpoints, and NAT trade-offs., • Join security reviews and threat modeling, and close out findings. Name the threat before it names you.Leading the Order (Leadership), • Lead technical design for new services and write design docs that face the hard choices squarely (Lambda vs. Fargate, sync vs. async)., • Review code thoroughly and train the mid-level and junior engineers who will stand the watch after you., • Keep the scrolls current: runbooks, architecture diagrams, and onboarding docs.Proof of Battle (Required Qualifications) Years in the field. 6+ years of professional software development. 4+ building and operating production Node.js services. 3+ running production workloads on AWS Lambda and ECS/Fargate. You’ve carried a service from first sketch to launch to the night it tried to fall over, and you were the one who picked up the phone. Your arsenal. • Node.js / TypeScript: You know the event loop the way a sailor knows the tide. Async patterns, streams, memory behavior, CommonJS and ESM, and typing that actually protects you., • Fastify: Designing, building, and migrating APIs onto it., • Vue.js: Designing, building, and migrating UIs with it., • AWS Lambda: Handler lifecycle, execution environment reuse, the concurrency model, event source mappings, layers, container-image functions, and runtime upgrades before they become emergencies., • AWS core services: IAM, API Gateway, SQS, SNS, EventBridge, Step Functions, DynamoDB, S3, CloudWatch, ECR, ECS/Fargate, and VPC fundamentals., • AWS SDK for JavaScript v3: Modular clients, middleware, pagination, and retry configuration., • Docker: Multi-stage builds, layer caching, image hardening, and debugging containers both locally and in production., • Terraform: Real production use, including state management, modules, and workspaces or per-environment layouts., • CI/CD: GitHub Actions or something comparable, with environment promotion and automated testing gates., • Testing: Unit, integration, and contract tests (Jest, Vitest, or ava), plus local Lambda emulation with SAM CLI or LocalStack., • Datastores: Working proficiency with MongoDB or DocumentDB, and ElasticSearch or OpenSearch.Honors of Distinction (Preferred Qualifications), • AWS Certified Developer Associate, Solutions Architect Associate or Professional, or DevOps Engineer Professional., • Experience with AWS Organizations and multi-account landing zones., • Identity-aware proxies or zero-trust access (Pomerium or equivalent). Trust nothing at the door., • OpenTelemetry across both Lambda and container workloads., • Container supply-chain tooling: SBOM generation, image signing, Trivy, Grype, or Amazon Inspector., • Migrating workloads between Lambda and containers, or dragging legacy hosts into the serverless age., • Time in regulated or security-sensitive environments such as SOC 2, PCI, or gaming and casino compliance., • Some fluency in the other tongues of our stack: Java/Scala, Python, or Go.The Warden’s Code (Core Competencies) Ownership. Production health, cost, and security are your watch. Nobody else’s. Pragmatic judgment. The simplest architecture that does the job, and you can explain why. Communication. Clear design docs, PR descriptions, and incident reports. You can explain a decision to someone who has never seen a terminal. Collaboration. You work well with product, QA, security, and every other engineering team. Mentorship. You leave the team stronger than you found it. The First Six Moons (Success Measures) Expected Outcomes 30 days: Keys to the gate in hand. First production change shipped through the full pipeline. Existing Lambda and container services reviewed and their weak points written down. 90 days: You own one or more services end to end, including on-call. At least one improvement delivered to observability, deployment safety, or cost. 6 months: You lead the design and delivery of a new service or a major refactor, and you set or raise a team standard (a Lambda project template, a base Docker image, a Terraform module). Must have • 6+ years of professional software development., • 4+ years building and operating production Node.js services in TypeScript., • 3+ years running production workloads on AWS Lambda and ECS/Fargate., • Owned at least one service from design through launch and on-call., • Node.js internals: event loop, async patterns, streams, memory behavior, CommonJS and ESM., • Fastify: built production APIs and migrated existing APIs to it., • Vue.js: built production UIs and migrated existing UIs to it., • AWS Lambda: handler lifecycle, execution environment reuse, concurrency model, event source mappings, layers, container-image functions, runtime upgrades., • Production use of IAM, API Gateway, SQS, SNS, EventBridge, Step Functions, DynamoDB, S3, CloudWatch, ECR, ECS/Fargate, and VPC networking., • AWS SDK for JavaScript v3: modular clients, middleware, pagination, retry configuration., • Event-driven design: idempotent handlers, retry safety, dead-letter queues, partial batch failure reporting., • Docker: multi-stage builds, layer caching, pinned base images, non-root users, debugging containers locally and in production., • Terraform in production: remote state, modules, per-environment layouts., • GitHub Actions or equivalent: test gates, environment promotion, OIDC federation to AWS with no long-lived credentials., • Safe deploys: Lambda aliases with weighted traffic shifting, ECS rolling or blue/green, automated rollback on alarm., • Testing: unit, integration, and contract tests (Jest, Vitest, or ava); local Lambda emulation with SAM CLI or LocalStack., • MongoDB or DocumentDB, plus Elasticsearch or OpenSearch., • Secrets in AWS Secrets Manager or SSM Parameter Store with KMS., • Observability: structured logging, metrics, distributed tracing, SLOs, alarms, dashboards., • On-call participation, incident leadership, and blameless postmortems., • Writes design docs with explicit trade-offs (Lambda vs. Fargate, sync vs. async)., • Reviews code and mentors mid-level and junior engineers. Preferred • AWS certification: Developer Associate, Solutions Architect Associate or Professional, or DevOps Engineer Professional., • AWS Organizations and multi-account landing zones., • Identity-aware proxy or zero-trust access (Pomerium or equivalent)., • OpenTelemetry across Lambda and container workloads., • Container supply-chain tooling: SBOM generation, image signing, Trivy, Grype, or Amazon Inspector., • Migrated workloads between Lambda and containers, or from legacy hosts to serverless., • Worked under SOC 2, PCI, or gaming/casino compliance., • Java/Scala, Python, or Go.

Job Description Full Time Male Specimen Collector Location: Lexington, KY Schedule: Full-Time | Monday, Wednesday and Thursday 10:00am-12:00pm Seeking: Male candidates required for observed collections of gender identified male patients. Help make a positive impact in your community! Millennium Health LLC is an accredited specialty laboratory with more than a decade of experience in medication monitoring and drug testing services, helping clinicians monitor use of prescription medications and illicit drugs supporting improved clinical decision-making as part of treatment for millions of Americans with chronic pain, mental illness, and substance use disorders. The Specimen Collector is a key role at Millennium Health. As our representative, this position provides exemplary care and exceptional customer service to patients, clinicians, and our laboratory. As a Specimen Collector: • Collect patient urine and/or oral fluid (saliva) specimens, • Process and package collections for shipping, • Serve as an intermediary between the practice / clinic and the laboratory, • Record patient information, physician order details, and pertinent laboratory information, • Resolve specimen concerns with billing or patient information in ordering portal, • Order and maintain collection supplies inventory onsite, • Observe collection for Millennium Health specimens (when applicable), • Driving from/to multiple facilities may be required Requirements Ideal Candidate: • 6+ months of experience as a specimen collector or 1+ years of experience in the medical field, directly supporting patients preferred, • 2+ years of customer service experience can be considered in place of medical experience, • Demonstrated ability to navigate a smart phone and computer required, • Valid driver’s license required; reliable transportation, • Medical insurance/billing and/or familiarity with medications/diagnostic codes is a plus, • Ability to ensure HIPAA, HiTrust, Confidentiality and Compliance policy, procedures, and standards are always adhered to., • Ability to ensure administrative, physical and technical cyber security controls are always adhered to, • High School diploma or equivalent required, • Physical requirements: sitting 60%, walking 20%, standing 20%, lifting up to 20 lbs. Millennium Health is a CLIA Certified and CAP Accredited specialty laboratory. We partner with a trusted and accredited background screening provider, to conduct pre-employment background checks. As part of our screening process, we will review the following: • National, federal, and county criminal history, • Global watchlist search, • Social Security Number (SSN) trace, • FACIS (Fraud and Abuse Control Information System) Level 3 search, • SAM (System for Award Management) and OIG (Office of Inspector General) exclusions, • Education verification, • Driving record (Motor Vehicle Report), • 5-panel urine drug screening The role requires location-specific credentialing as part of the pre-employment process. This may include, but is not limited to, successful completion of the following items: • Fingerprinting Clearance, • TB Test, • Record of Immunizations, • CPR Certification, • Licensure/Certification Verification (if applicable), • Location Specific Orientation All employment offers are contingent upon the successful completion of this background check. Offers may be rescinded if the results do not meet the standards established for the position. Benefits Benefits Offered: • Medical, Dental, Vision, Disability Insurance, • 401k with Company Match, • Paid Time off and Holidays, • Tuition Assistance, • Behavioral and Health Care Resources, • Salary Range: $18-21/hr., • Salary offered is dependent on qualifications, experience, and geographical location. Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Millennium Health is an Equal Opportunity/Affirmative Action Employer and E-Verify participant. All qualified applicants will receive consideration for employment without regard to race, color, creed, sex, national origin, disability, gender identity, sexual orientation or protected veteran status. -----------------

Job Description Industrial Inspection & Analysis is searching for an ANSI Inspector to join our Lifting Services team in Alabama or Kentucky. Position Overview The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure that they are in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including: • Acoustic emission tests to assess the integrity of the fiberglass and steel structure, • Magnetic particle inspections to identify surface cracks on ferrous metals, • Torque test all critical fasteners, among others., • Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system. Qualifications • Mechanically inclined., • Basic knowledge of mechanical processes, movement, and assembly., • Basic knowledge of hand tools., • Proficient computer skills., • Strong communication skills., • Adequate visual acuity and perception to identify and distinguish light, color, depth, distance, and other elements pertaining to spatial resolution., • Must be able to work independently with some direction from management., • Problem solver, detail oriented. Job Requirements • Able to stand, sit, squat, climb, crawl and twist for extended periods of time., • Ability to lift up to 50 pounds., • Must be punctual, accountable, and provide high quality customer service., • Must be able to travel for an extended period of time and available to work varying shifts which may include weekends, overnights and holidays., • Must have valid driver’s license and be able to pass a background check and drug screen. Benefits • Medical (w/Mental Health coverage), Dental, Vision insurance, • Voluntary Short-Term Disability, Critical Illness, and Accident plans, • Employer-paid Life Insurance and Long-Term Disability, • Employee Assistance Program (EAP), • 401(k) Retirement Plan, • Paid Time Off and Holidays, • Monthly cell phone reimbursement About Us Industrial Inspection & Analysis®️ (IIA) is an emerging, high growth inspection, testing, and analytical business seeking to build a national platform to serve a breadth of industrial sectors and geographies. We pledge to provide Story-Worthy Service and Solutions, through even the most challenging situations. Making the World Safer is our mission at IIA. We are committed to operating in an environmentally and socially responsible manner and to helping our customers do so as well. Across every industry we serve, we offer inspection and engineering services that promote safety, efficiency and compliance with all applicable regulations. Industrial Inspection & Analysis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state and local laws. IIA complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, without limitation, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Follow this link for a realistic job preview and videos of what it's like to work at KTA!: https://kta.com/working-at-kta/ KTA-Tator, Inc. (KTA) is a 100% employee-owned materials engineering firm, internationally recognized as a leading expert in corrosion protection and asset integrity. Five business units comprise the $40 million enterprise offering a broad range of coatings, steel, concrete fabrication and building envelope inspection, evaluation, and testing services in nearly every market and industry. KTA is recruiting full-time and part-time Certified Welding Inspectors (CWI) nationwide. All applicants must be willing to travel and work multiple shifts. Education and Experience: • High School Diploma or GED equivalent - required, • Current AWS CWI - required, • Bridge fabrication inspection experience - preferred, • NDT Experience is desirable, • AMPP (NACE) certification is desirable Knowledge/Abilities/Skills: • Good oral and written communication skills, • Decision making skills, • Reliable transportation, • Valid driver’s license, • Good computer skills including Microsoft Office products (Word, Excel, Outlook) and ability to navigate the internet Physical Requirements: • Close, color, distance, depth vision and ability to adjust focus, • Ability to travel extensively and ability to work outside on occasion (including inclement weather), • Climbing, bending, crawling, and working in confined spaces and on uneven terrain, • Ability to lift 25+ lbs. Behaviors: • Excellent work ethic, • Customer oriented, • Ability to meet deadlines, • Detail oriented, • Self-starter, • Works well in a team environment and independently Drug testing and criminal background and motor vehicle check will be conducted. Salary Range: $30-42/hour with comprehensive benefits package. Hourly rate is based on experience and certifications. KTA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment based on merit, without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. KTA is a Standing Firm Company. Elzly Technology Corporation (Elzly) is a wholly-owned subsidiary of KTA-Tator, Inc. (KTA). Links: KTA's Equal Employment Opportunity Policy Statement Know Your Rights: Workplace Discrimination is Illegal The Family and Medical Leave Act Pay Transparency Nondiscrimination Provision Notice of E-Verify Participation E-Verify Right to Work We strive to make this site accessible to any and all users. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center and application process as a result of your disability or if you have Equal Employment Opportunity questions. To request an accommodation, please contact us at info@kta.com Powered by JazzHR 5MBnM0ljRY

Job Description Dixon Engineering is hiring Field Technicians - Coatings Inspectors to join our team! This entry-level role is perfect for candidates with some construction experience who are eager to learn and grow in the coating and engineering industry. What You’ll Do: • Conduct coating inspections on construction projects., • Complete field inspection reports., • Assist with on-site testing using specialized equipment., • Work with a supportive engineering team. What We’re Looking For: • Entry-level with some construction experience., • Ability to work at heights and in various outdoor conditions., • Valid driver’s license and good driving record., • Strong attention to detail and a safety-conscious mindset. Why Dixon Engineering? • Hands-on training and career advancement opportunities., • Competitive pay and benefits., • Supportive, team-oriented work environment. Benefits: • Health Insurance (Medical, Dental, Vision)., • Life Insurance and Disability Coverage., • 401(k) Plan with company match., • Paid Time Off (PTO) and Holidays., • Company vehicle, phone, and travel perks. Education & Experience: • High School Diploma required., • Some college or construction-related experience is a plus. Ready to start your career with Dixon Engineering? Apply today! Compensation: $22 - $34 hourly Responsibilities: • Oversee coating and construction work to ensure it meets project specifications., • Use testing tools to inspect the project at different stages., • Approve quality work, document issues, and write daily inspection reports., • Keep accurate records, including photos, for inspections., • Enforce safety practices to maintain a secure job site. Qualifications: • Valid driver’s license with a good driving record., • High school diploma required; some college or technical education in construction-related fields is a plus., • Able to pass a physical and work safely at heights., • Ability to work independently or with a team., • Experience performing quality work in construction., • Strong communication and documentation skills., • Basic computer skills for reporting., • Positive attitude and strong work ethic., • Ability to handle conflicts professionally on the job., • Organized, punctual, and good time management., • Demonstrated commitment to safety on job sites., • Able to pass a background check. About Company Dixon Engineering Inc. is a consulting firm that provides engineering and inspection services to the coating industry. https://www.dixonengineering.net

Job Description D7 Pneumatics LLC is seeking an experienced QA/QC Manager to support our fabrication shop and field operations based in Jonesboro, Arkansas. This position will begin on a part-time or as-needed basis, with the potential to develop into a full-time role based on workload and company growth. The QA/QC Manager will be responsible for implementing and maintaining D7’s Quality Control Program, supporting ASME and National Board Code work, and ensuring fabrication and field activities comply with approved procedures, project specifications and applicable codes. Key Responsibilities Administer and enforce the D7 Quality Control Manual and related procedures. Oversee quality activities for shop fabrication and field installations. Review contracts, drawings, specifications and project requirements before work begins. Confirm the applicable codes, standards, inspection requirements and testing procedures for each project. Maintain compliance with applicable ASME, National Board and pressure-piping requirements. Coordinate with Authorized Inspectors, client representatives, engineers and third-party inspection agencies. Verify that approved Welding Procedure Specifications are available and properly followed. Review and maintain WPS, PQR and Welder Performance Qualification records. Monitor welder qualifications and continuity. Verify material receiving, identification, storage and traceability. Review Material Test Reports and certificates of compliance. Maintain weld maps, weld logs, inspection reports and project turnover documentation. Establish and monitor inspection hold points. Perform or coordinate fit-up, visual welding and final inspections. Coordinate nondestructive examination, including RT, UT, MT and PT, when required. Ensure pressure testing is performed using approved procedures, calibrated equipment and proper safety controls. Monitor preheat, interpass temperature and postweld heat treatment when applicable. Manage nonconformance reports, corrective actions and weld-repair documentation. Maintain calibration records for inspection and testing equipment. Control Code stamps, data reports and quality records as assigned. Assist with ASME, National Board, Authorized Inspection Agency and client audits. Conduct internal quality audits and recommend improvements. Prepare complete and organized project turnover packages. Train supervisors, welders, fitters and shop personnel on applicable quality requirements. Maintain a professional, practical and safety-focused quality culture. Required Qualifications Previous QA/QC experience in industrial fabrication, pressure piping, power-generation, boiler or pressure-vessel work. Working knowledge of welding inspection and fabrication quality-control methods. Ability to read fabrication drawings, piping isometrics, P&IDs, weld maps and technical specifications. Knowledge of welding procedures, welder qualifications and material traceability. Experience administering inspection, examination and pressure-testing requirements. Strong documentation, organization and communication skills. Ability to work independently and coordinate effectively with project managers, supervisors, inspectors and clients. Proficiency with Microsoft Word, Excel, email and electronic recordkeeping. Willingness to support both Jonesboro shop operations and field projects as required. Preferred Qualifications Knowledge of ASME BPVC Sections I, II, V, VIII and IX. Knowledge of ASME B31.1 Power Piping and ASME B31.3 Process Piping. Experience with National Board Inspection Code repair and alteration requirements. Experience working under ASME U and S Certificates and a National Board R Certificate. AWS Certified Welding Inspector certification. ASNT or employer-based NDE qualifications. Experience dealing with Authorized Inspectors and jurisdictional authorities. Experience in power plants, pulp and paper facilities, steel mills, sawmills or other heavy-industrial facilities. Employment Structure This position is intended to begin as part-time or as-needed employment. Hours may increase based on active projects, shop workload and field requirements. The position has the potential to transition into a full-time QA/QC management role as D7’s Code fabrication and pressure-piping operations expand s.

Lockheed Martin - - Responsibilities: Inspect electrical/electronic wiring harnesses and avionics systems; Inspect structural, hydraulic, pneumatic, mechanical assemblies; Audit BOMs against drawings and work packages; Inspect surface prep, painting, and markings on aircraft; Perform weight-and-bal

The Quality Inspector is responsible for delivering comprehensive quality assurance, inspection, testing, and sustainment services supporting the SOF GLSS contract.

Hotel Room InspectorThe Hotel Room Inspector is responsible for ensuring all guest rooms and public areas meet the hotel's cleanliness, presentation, and brand standards before being released for guest occupancy.

As a Sprinkler Inspector III, you will perform routine inspections and preventative maintenance on sprinkler and suppression systems, document deficiencies clearly, and help keep life safety systems operating as intended.

The Hotel Room Inspector is responsible for ensuring all guest rooms and public areas meet the hotel's cleanliness, presentation, and brand standards before being released for guest occupancy.

A well-established commercial fire protection contractor is hiring a Fire Alarm Inspector to perform inspection, testing, and maintenance of fire alarm systems across a growing base of commercial customers, including office, healthcare, education, retail, and multifamily properties.

Tetra Tech is adding experienced Cost Estimators to our Disaster Recovery team to support current and future disaster recovery operations across the United States. At Tetra Tech, we are Leading with Science to solve the world's most complex challenges. Our industry-leading experts in engineering and consulting are committed to driving positive change in communities around the world. For over 50 years, we have been at the forefront of innovation and sustainability. Today we stand as a market leader, offering cutting-edge solutions in water, environment, energy, and international development. Our work has improved more than 625 million lives around the world. Join Tetra Tech to make a real difference. Our work leverages cutting-edge technologies, advanced analytics, and the expertise of world-class scientists and engineers to create meaningful change around the world. Discover your full potential - join us to advance your career while leaving a lasting legacy. As a Cost Estimator in Tetra Tech's Disaster Recovery Cadre, you will support FEMA Public Assistance and other disaster recovery programs by developing accurate, defensible, and well-documented cost estimates for infrastructure restoration, emergency work, and permanent work projects. You will evaluate damaged infrastructure, develop and validate project scopes, prepare cost estimates, and support funding eligibility determinations for public facilities and infrastructure. This is an on-call, as-needed position supporting disaster recovery programs following hurricanes, floods, tornadoes, wildfires, earthquakes, and other federally declared disasters. Assignments may be remote, field-based, or hybrid depending on client needs and project requirements. Essential Job Functions: • Support FEMA Public Assistance and other disaster recovery programs through project scoping, damage assessment, and cost estimating activities., • Support site inspections of damaged facilities and infrastructure to understand disaster-related damages, proposed repairs, and construction requirements., • Evaluate project scope, means and methods of construction, and restoration approaches., • Assist with the development and validation of disaster recovery project scopes., • Collaborate with applicants, engineers, architects, contractors, and program staff to define eligible work and project requirements., • Prepare conceptual, parametric, and detailed bottom-up cost estimates for disaster recovery projects., • Develop labor, equipment, materials, subcontractor, and general conditions cost estimates., • Estimate costs associated with repair, restoration, reconstruction, mitigation, and replacement projects., • Prepare cost analyses for roads, bridges, utilities, buildings, drainage systems, parks, and other public infrastructure., • Support development of FEMA Cost Estimating Format (CEF) analyses when required., • Develop estimate documentation that is clear, defensible, and suitable for audit and program review purposes., • Review engineering reports, plans, specifications, contractor proposals, and construction cost documentation., • Evaluate project assumptions, quantities, unit costs, and estimating methodologies., • Apply knowledge of applicable construction standards, codes, and regulatory requirements., • Identify cost drivers, scope changes, and factors impacting project eligibility and funding., • Assist project teams with cost validation, reasonableness determinations, and documentation reviews., • Provide technical estimating expertise to project managers, Public Assistance consultants, and applicant representatives., • Participate in project formulation meetings and recovery planning discussions., • Support Requests for Information (RFIs), technical reviews, appeals support, and other recovery program activities., • Coordinate with multidisciplinary teams including engineers, architects, environmental specialists, grant professionals, and construction experts., • Maintain project records and supporting documentation in accordance with client and program requirements. Required Qualifications: • Minimum of 2 years of professional experience in construction estimating, engineering, architecture, construction management, infrastructure planning, or a related discipline., • Experience developing conceptual, parametric, and detailed cost estimates for infrastructure or facility projects., • Experience estimating labor, equipment, material, and construction costs., • Familiarity with modern construction practices, facility assessments, project scope development, and construction inspection activities., • Experience working collaboratively within multidisciplinary project teams., • Strong analytical, organizational, and problem-solving skills., • Strong written and verbal communication abilities., • Proficiency with Microsoft Office Suite, including Excel, Word, Outlook, and Teams., • Ability to work independently and effectively under changing priorities and demanding schedules., • Ability and willingness to travel as needed for field assignments., • Valid driver's license. Preferred Qualifications: • Bachelor's degree in Engineering, Architecture, Construction Management, Quantity Surveying, Infrastructure Management, or a related field., • Professional Engineer (PE), Registered Architect (RA), Licensed Contractor, Certified Cost Professional (CCP), Certified Cost Estimator, or similar professional credential., • Experience using RSMeans, Xactimate, FEMA Cost Estimating Format (CEF), or other industry-standard estimating platforms., • Knowledge of FEMA Public Assistance regulations, policy, eligibility requirements, and the Public Assistance Program and Policy Guide (PAPPG)., • Previous FEMA experience as a Cost Estimator, Program Delivery Manager, Site Inspector, Hazard Mitigation Specialist, Policy Advisor, or similar disaster recovery role., • Experience with roads, utilities, drainage systems, site development, vertical construction, or public infrastructure projects., • Experience supporting disaster recovery, grant-funded infrastructure programs, or public sector capital projects. Physical Requirements: • Ability to perform field inspections and site visits at disaster-impacted facilities and infrastructure when required by an assignment., • Ability to travel to client offices, applicant facilities, disaster recovery operation centers, and other project locations as needed., • Ability to perform computer-based estimating and technical review activities for extended periods during remote or office-based assignments. Work Environment / Environmental Factors: • Work assignments may be performed remotely, in the field, or through a hybrid arrangement depending on client needs and project requirements., • Field assignments may take place in disaster-impacted communities and at damaged public facilities or infrastructure sites., • Work conditions and location may vary by assignment, including active disaster recovery operations and geographically dispersed project teams. Additional Information: • This is an on-call, as-needed cadre position. Work assignments are not guaranteed and depend on disaster declarations, contract awards, client needs, project requirements, qualifications, availability, and recovery program activations., • Acceptance of assignments is voluntary, and periods of inactivity between deployments may occur., • Assignment schedules may be flexible and may include periods of high-intensity workload during active recovery operations., • Some deployments may require extended travel or mobilization on short notice; other assignments may be fully remote., • Evening and weekend work may be required during surge events or active disaster recovery operations. Life at Tetra Tech: • Comprehensive and market-competitive benefits., • Merit-based financial rewards., • Flexibility and company-wide commitment to work/life balance., • Collaborative team atmosphere that values the contributions of all employees., • Learning and development opportunities for ongoing professional growth. About Tetra Tech: Tetra Tech is the leader in water, environment, and sustainable infrastructure, providing high-end consulting and engineering services for projects worldwide. With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Tetra Tech is proud to be an Equal Opportunity Employer. All qualified candidates will be considered without regard to race, color, religion, national origin, age, disability, sex, marital or familial status, status as a protected veteran, or any other characteristic protected by law. Tetra Tech is a VEVRAA federal contractor and we request priority referral of veterans. We invite applications from all interested parties.

The Director of Finance and Reimbursement Compliance functions as a subject matter expert and the lead financial auditor for the Compliance Department. The Director of Finance and Reimbursement Compliance provides leadership and guidance, makes work plan recommendations, assists in the identification of compliance risk areas, the development of policies and departmental standard operating procedures, and provides collaboration in the development of corrective action plans for facilities. The Director of Finance and Reimbursement Compliance will assist with the development of system-wide compliance and internal audit functions for ARH hospitals, physicians and non-physician providers, ambulatory services, home services and other entities to ensure overall compliance. The Director is responsible for designing, planning, and executing coding and billing compliance audits following regulatory requirements and industry-accepted standards. The successful candidate will be expected to work in a collaborative manner across multiple ARH departments, including the Organization's Finance and Legal Departments. Hybrid (Remote/On-Site). Must reside in Kentucky or West Virginia. Occasional travel (up to 20%) may be required for this role. Responsible for the development of comprehensive financial audit plans in consultation with other Compliance Department members. Executes financial audits and requested investigations independently. Generates reports and analyzes data from numerous databases and software systems across ARH. Performs/documents audit follow-up activities to ensure ongoing monitoring and that any requested corrective action plans are successfully implemented. Prepares clear and concise reports that include sufficient detail and documentation to support procedures completed, related findings, and conclusions. Maintains awareness of changes in auditing principles and practices and related areas in order to maintain professional competence. Applies Internal Audit Standards established by the Institute of Internal Auditors. Able to clearly and articulately discuss audit results with all levels of management and assist with education as needed and appropriate. Maintains awareness of changes in statutes and regulations as well as compliance principles and practices in order to maintain professional competence. Reviews all relevant programs and activities affected by industry regulations and recommends changes to address company procedures and practices that are non-compliant. Reviews the Office of Inspector General's work plan, creates education therefrom, and assists in the creation of compliance audits that address areas of concentration. Research and respond to compliance inquiries. Coordinate with the Chief Compliance & Privacy Officer in the development of the Compliance Department's annual workplan. Perform complex regulatory, audit, billing, coding documentation, medical necessity and other general compliance process and analyses that ensure the hospital receives appropriate reimbursements and adheres to applicable laws, rules, guidelines and regulations. Participates in annual risk assessment and makes practical recommendations for process and/or policy improvements. Provides education on reimbursement updates as appropriate. Maintains professional certification. Perform other duties as assigned. EducationBachelor's degree in accounting or related field (e.g. finance, business) Minimum Work ExperienceFive years of experience in a health care setting with specific experience in reimbursement or financial auditing. Required Skills, Knowledge, and Abilities Strong understanding of internal auditing and reimbursement laws. Ability to research and understand compliance requirements of substantial complexity, including state and federal statutes and regulations. Strong analytical skills that enable the Director to assess effective billing, compliance, and related issues and report thereon. Ability to convert compliance regulations into logical and practical audit tools or scope documents. Excellent communication and collaboration skills. Demonstrated leadership abilities. Proficiency in data analysis and reporting tools. Ability to maintain confidentiality and handle sensitive information with discretion and professionalism. Ability to manage multiple deadlines and projects simultaneously. Currently have, or obtain within 12 months of hire, one or more of the following: Certified Internal Auditor (CIA), Certified in Healthcare Internal Audit (CHIAP), Certified Fraud Examiner (CFE), or related certification.

Quality Inspector / CMM Programmer. We are seeking an experienced Quality Inspector / CMM Programmer to join an established precision manufacturing operation.

Duties include assisting both the Lead Inspector and/or Inspection Manager in collecting data and generating any necessary paperwork (Sprinkler Inspection Reports, Quick Reports, and Inspection Certificates). At least years' experience as a commercial fire sprinkler inspector. Must have a KY fire sp

Job Description Ready to turn your eye for detail into a rewarding, flexible career with a company that trusts you to own your day? Information Providers, Inc. is seeking a part-time 1099 Insurance Property Inspector in Lexington, KY, who thrives in an independent, field-based schedule. If you enjoy working on the road, managing your own time, and making a real impact, this opportunity is calling your name. Apply today and take control of your workday! As our Insurance Property Inspector, you'll earn $20–$28 per billable hour. What Makes You a Great Fit We're looking for motivated individuals who enjoy working independently, solving problems, and spending time in the field. Previous experience in any of the following areas is highly valued: • Insurance inspections, • Real estate or property appraisal, • Home inspections, • Insurance claims adjusting, • Construction or commercial contracting, • Loss control or risk assessment, • First responder experience To be successful in this role, you should also have: • A valid driver's license, reliable transportation, and a willingness to travel throughout your assigned territory., • The ability to work independently while managing your own schedule and workload., • Strong attention to detail with accurate measuring, documentation, and reporting skills., • Excellent verbal and written communication skills., • Basic computer proficiency, including Microsoft Office, smartphones, and Windows-based laptops., • The ability to complete administrative work remotely and submit reports in a timely manner., • A willingness to learn, adapt, and continuously improve., • The ability to work comfortably outdoors in a variety of weather conditions. No specific degree is required. We're looking for dependable, self-motivated professionals with a strong work ethic and a commitment to delivering quality work. YOUR DAY-TO-DAY AS AN INSURANCE PROPERTY INSPECTOR This is a 1099 position with flexible hours. Field Operating Hours: Normal operating hours are from 8:00AM until 8:00PM, or dusk, whichever is earlier, Monday through Saturday. Unless requested by the policyholder or resident no surveys (or phone contact) will be completed after 8:00PM or on Sundays or Holidays. You will dispatch daily from home with no central office reporting required. As our Insurance Property Inspector, you'll conduct on-site inspections of homes and businesses, capturing detailed photographs and documenting key features that matter to underwriting decisions. As you walk each property, you'll assess conditions, identify potential hazards or concerns, and gather accurate data that tells the full story. Back at your workspace, you'll compile thorough, high-quality underwriting survey reports, ensuring every detail supports informed risk evaluation. ABOUT OUR COMPANY At Information Providers Inc. (IPI), we believe great work starts with great people. Since 1996, we've established ourselves as a leader in Property & Casualty and Premium Audit information services, serving insurance companies nationwide through innovative technology and experienced professionals. With over 430 employees and a unique field force supported by regional offices, we deliver accurate, high-quality information. Our core values, service, reliability, flexibility, timeliness, and innovation, drive our growth and foster a supportive workplace. At IPI, your ideas matter, your growth is supported through mentorship and opportunity, and your contributions make a meaningful impact every day. Join us and be part of a team that values its people as much as its purpose! TAKE THE NEXT STEP If you're ready for a flexible, rewarding 1099 role where your skills make a difference, apply now! Our initial application process is quick, easy, and mobile-friendly, so you can take the next step in minutes. Must have the ability to pass a background check.

Job DescriptionCompany Description Lochner and Egis are entering an exciting new chapter as one organization. We have combined decades of trusted U.S. engineering expertise with the global reach, technical excellence, and career opportunities of a leading international engineering, consulting, and infrastructure firm. While our name has changed, our commitment to our people, clients, and communities is stronger than ever. At Egis, every project is an opportunity to create lasting impact. We collaborate with public and private clients to design and deliver innovative transportation, aviation, rail, transit, water, structural, environmental, and infrastructure solutions that connect communities and improve everyday life. Join a team where innovation is encouraged, collaboration is valued, and your work helps build a more sustainable future. Job Description We are looking for a CEI Inspector in the Kentucky market. The ideal candidate will perform field inspections along with using material sampling, testing equipment and approve testing procedures. The Impact You'll Make • Performs field inspections and assures that work meets standards and specifications., • Uses materials sampling and testing equipment and approved testing procedures., • Inspects traffic control and helps contractors maintain workplace safety standards., • Creates timely and succinct documentation of construction activities and inspection findings., • Operates company vehicle traveling to construction sites or delivering materials samples.Qualifications The Expertise You'll Bring • 2+ years of construction inspection experience - heavy highway/roadway construction experience is preferred., • A general knowledge of construction techniques and an ability to read plans and specifications is mandatory., • Must possess a valid Kansas driver license and maintain a clean driving record., • Requires good communication and documentation skills - must possess the ability to communicate findings or instructions with engineers, other inspectors, and material testing technicians., • Must be able to use an IPAD or equivalent to log daily inspection reports., • Job duties require travel anywhere in the state depending on project location., • Some overnight stays may be required for remote projects. Additional Information Why You'll Thrive at Egis At Egis, you'll do more than build your career—you'll help shape the future of infrastructure. As we continue to expand across the United States, we're looking for curious, collaborative professionals who are passionate about solving complex challenges and delivering projects that improve communities and create lasting impact. Whether you're launching your career or bringing years of experience, you'll have the opportunity to work alongside industry-leading experts, collaborate across disciplines and borders, and contribute to projects that transform the way people live, move, and connect. Here, you'll be empowered to take on meaningful work, develop new skills, and grow your career with the support of a global engineering leader. What Sets Egis Apart • Meaningful Projects – Contribute to complex infrastructure projects that strengthen communities and improve quality of life., • Global Expertise, Local Impact – Collaborate with technical specialists across North America and around the world while delivering solutions that make a difference locally., • Career Growth – Expand your skills through mentorship, professional development, technical training, and leadership opportunities., • A Culture of Collaboration – Thrive in an inclusive environment where diverse perspectives are valued, innovation is encouraged, and teamwork drives success., • Opportunity to Grow with Us – Join a rapidly expanding organization where your ideas, contributions, and career can grow alongside the business. Total Rewards That Support You We believe great work starts with supporting our people. That's why Egis offers a comprehensive Total Rewards program designed to promote your health, well-being, financial security, and professional growth, including: • Competitive medical, dental, and vision coverage, • 401(k) retirement plan with company match, • Paid time off and flexible holiday program, • Flexible work arrangements, including hybrid and remote opportunities where business needs allow, • Life insurance and disability coverage, including maternity leave, • Health Savings Account (HSA) with employer contributions, • Flexible Spending Accounts (FSA) for healthcare and dependent care expenses, • Paid family leave, • Wellness programs supporting physical and mental well-being, • Education assistance, professional development, and continuing learning opportunities, • Employee Assistance Program (EAP), • Employee discount programs Compensation & Pay Transparency At Egis, we're committed to creating an environment where talented people can do their best work, continue to grow professionally, and build rewarding, long-term careers. We're committed to making competitive offers that recognize the unique experience, expertise, and value each candidate brings to our team. In addition to base salary, this position may be eligible for incentive compensation, where applicable, and a comprehensive Total Rewards package that includes health benefits, retirement savings, paid time off, professional development opportunities, and other employee programs. Equal Employer Egis is proudly committed to recruiting and retaining a diverse and inclusive workforce. Egis provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. All positions at Egis require an applicant who has accepted an employment offer to undergo pre-employment screening. Background checks include SSN/SIN validation, motor vehicle verification, education verification, employment verification, a criminal check, search against global sanctions and government watch lists, and drug tests. All employment offers are contingent upon successful results of the pre-employment screening. Privacy Policies An affirmative action participant EOE M/F/D/V/SO

Job Description Entry-Level Construction Materials (CMT) Laboratory Technician - Part-time Requisition Number: 2026-1830-09 Like working with your hands and don't mind getting dirty? This could be the start of your career in construction materials testing and inspection. No experience? That's okay. If you're dependable, hands-on, and ready to learn, we'll help you build the skills to start a career at S&ME as a part-time CMT Laboratory Technician on our Construction Services team in Lexington, Kentucky. Build Your Career. Own Your Future. At S&ME, you're more than just an employee; you're an employee-owner of a 100% employee-owned company that has been solving complex geotechnical, civil, environmental, and construction materials testing challenges for over 50 years. We're invested in your success and offer a career path with growth opportunities, training, and hands-on experience. Join a team that values safety, integrity, and teamwork while offering industry-leading benefits designed to help you thrive - on and off the job, including but not limited to: • 100% Employee Stock Ownership Plan (ESOP) with a minimum 5% company contribution & automatic enrollment, no matter your role, • 401(k) Retirement Plan, • Paid Holidays and Paid Time Off (PTO) - with rollover options, • Paid Maternity & Parental Leave, • Mentorship & Career Development Programs, • Credential Incentive Program - get rewarded for advancing your skills, • Tuition Reimbursement, • Employee Recognition Program, • Company Vehicle & Fuel Card - for project-based roles, • $2,000 Employee Referral Bonuses - and more! Your Role: Hands-On, Impactful, and Fast-Paced: As a part-time entry-level Laboratory Technician specializing in Construction Materials Testing, you will be essential in examining and evaluating materials like soil, concrete, masonry, and asphalt. Collaborating with seasoned technicians and experts, you will ensure precise and comprehensive documentation of test outcomes, maintain laboratory instruments, and assist with equipment calibrations. Your contribution will be crucial to the success of our projects by verifying that materials comply with the required standards. What You'll Do: • Testing and Documentation: Perform and record tests on various construction materials with accuracy and meticulousness. While working with experienced team members, you will also operate independently, ensuring that test results are logical, thorough, and prepared for review., • Equipment Maintenance: Keep all laboratory equipment in excellent condition and ensure it is properly calibrated. Your role will be key in maintaining the lab's efficiency and the accuracy of our testing procedures. Experience shifting work hours weekly based on project needs and weather conditions, including early mornings, some weekends, and overtime (paid at time and a half). What We're Looking For: • High School diploma/GED, • Curiosity and the willingness to learn; obtaining certifications is part of your growth, • Active industry-related certifications, a plus:, • American Concrete Institute (ACI): Field Testing Grade I; Strength Testing Technician; Laboratory Technician, • International Code Council (ICC): Special Inspector (Reinforced Concrete, Masonry, Soils), • DOT Certifications in the fields of Aggregate, Conventional Density, Asphalt, and Concrete, • Strong attention to detail and effective communication skills in English, including speaking, reading, and writing, • Basic math skills with an understanding of weight, volume, pressure, and units of measure, • Understanding of a fluctuating weekly work schedule depending on project needs What to Expect: With the use of Company-provided Personal Protective Equipment (PPE). • Working most of the time in the office, but might be requested to work outdoors in varying weather conditions, • Walking on a concrete/tile floor and standing for potentially up to 12 hours a day, • Lifting and carrying 40-50 lbs. of field/laboratory samples and equipment, • Safely handling field tools and maneuvering equipment on active construction sites Why Join Us? At S&ME, your career growth matters; you matter. You'll receive professional training, mentorship, and support to work on challenging projects and be part of a company that truly invests in its people. Every employee benefits from our employee-ownership program, no matter your role. This is more than a job; it's a chance to build a long-term career in the engineering and construction industry. Ready to Get Started? Apply today and take the first step toward an exciting future with S&ME! Third Party Staffing Agency Policy: No agency, recruiter, or search firm may submit candidate information to S&ME without a current written agreement and prior authorization from S&ME Talent Acquisition. Unsolicited submissions are deemed non-confidential and non-proprietary and will not create any contractual obligation, candidate ownership rights, referral rights, placement rights, or fee liability. S&ME expressly rejects any terms and conditions included with unsolicited submissions and reserves the unrestricted right to recruit, hire, or engage any candidate without compensation to the submitting party. This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job Description CHC Home Inspection is looking for the right candidate with extensive Contruction experience/knowledge who is also great with people for performing home inspections. Great people skills and distinguished at dealing with the public is very important. Inspector position can be physically demanding as crawlspaces, roofs and attics will need to be accessed frequently. CHC experiences consistent exponential growth and is comprised of exceptional team members who recognize the importance of a company that creates room and encourages personal growth within the company. Apply for this position by sending a letter of interest to clay@chcinsp.com \nCompany Description CHC is a family based Central Kentucky business that realizes the importance of creating opportunities to allow and encourage personal growth. CHC is a family based Central Kentucky business that realizes the importance of creating opportunities to allow and encourage personal growth.

Job Description Position Summary The Maintenance Manager is responsible for leading all aircraft maintenance operations for AirMart while ensuring every aircraft meets the company's high standards of quality, safety, and FAA compliance. This position oversees maintenance personnel, manages workflow, coordinates with outside maintenance vendors, and ensures aircraft move efficiently from acquisition through delivery. Success in this role requires exceptional leadership, strong organizational skills, aviation maintenance expertise, and the ability to balance quality, profitability, and customer deadlines. Primary ResponsibilitiesMaintenance Operations • Direct all maintenance activities for company-owned and brokered aircraft., • Ensure all maintenance is completed in accordance with FAA regulations and AirMart quality standards., • Manage maintenance scheduling to maximize aircraft throughput and minimize downtime., • Monitor project timelines, labor hours, and overall profitability., • Coordinate maintenance priorities with aircraft sales and acquisitions teams.Team Leadership, • Supervise:, • Aircraft Mechanics, • Aircraft Detail Specialists, • Hangar Assistants, • Maintenance Coordinator, • Chief Inspector, • Assign daily work priorities., • Coach, mentor, and develop maintenance personnel., • Conduct performance evaluations., • Approve employee time off., • Foster a culture of accountability, teamwork, and continuous improvement.Project Management, • Manage maintenance workflow using Gantt charts and QuickBase., • Ensure all projects remain on schedule., • Track labor hours and job costing., • Communicate delays and revised completion dates proactively., • Coordinate outside maintenance vendors and specialty repair facilities.Inventory & Parts Management, • Oversee aircraft parts purchasing., • Maintain organized inventory levels., • Ensure required parts are ordered promptly., • Monitor vendor performance and delivery timelines., • Control maintenance costs while maintaining quality.Safety & Compliance, • Ensure compliance with:, • FAA regulations, • OSHA standards, • MSDS requirements, • Company SOPs, • Promote a clean, organized, and safe maintenance environment.Administrative Responsibilities, • Review and approve maintenance department timecards., • Ensure labor hours are entered daily into QuickBase., • Prepare payroll information for Accounting., • Plan for employee vacations and staffing coverage., • Assist leadership with future maintenance capacity planning.QualificationsRequired, • FAA Airframe & Powerplant (A&P) Certificate, • Inspection Authorization (IA) preferred or equivalent experience, • Aircraft maintenance management experience, • Strong troubleshooting and diagnostic skills, • Experience ordering aircraft parts, • Job costing experience, • Leadership experience, • Excellent organizational skills, • Strong verbal and written communication, • Computer proficiency, • Ability to manage multiple aircraft projects simultaneouslyPreferred, • Commercial Pilot Certificate, • General Aviation maintenance experience, • Experience using QuickBase or similar maintenance software, • Project management experience, • Gantt chart scheduling experienceWork Schedule, • Full-Time, • Average of 45+ hours per week, • Occasional evenings, • Occasional weekends, • Availability during critical aircraft delivery schedulesAirMart Commitment AirMart is committed to providing the Maintenance Manager with the tools, training, and support necessary to be successful. In return, this position is expected to uphold AirMart's mission, values, Standard Operating Procedures, and commitment to exceptional customer service while continuously improving both the department and the customer experience.

Job Description JOB PURPOSE The Quality Inspector is responsible for the inspection, measurement, documentation of in-process and finished goods. This position will utilize measurement and test equipment to verify all material meets or exceeds the current quality standards internally and externally (Customer) per established procedures. The Quality Inspector must follow all current procedures with a strict adherence to the Quality System and provide full Quality support to Manufacturing. Other areas can/will be added due to changing business needs. DUTIES AND RESPONSIBILITIES • Inspect materials using appropriate methods and equipment such as (not limited to) Calipers, Micrometers, Pitch Micrometers, TIR Gage, Air Gage, Height Gages, Thread Gages etc., • Perform incoming material inspections as necessary to validate they meet necessary specifications., • Perform First Article Inspections and provide results to support manufacturing and production of material and components., • Note: FAI’s are very high in priority and must always be prioritized appropriately, • Provide In-Process Inspections, random and scheduled, to manufacturing to verify quality requirements are being met., • In-Process inspections are to be performed routinely to monitor production processes and parts. Parts may be designated by production for QA verification; however, Quality Inspectors are expected at random unscheduled intervals, select parts from in-process and finished goods bin for validation and verification. (Random sampling), • Provide feedback (communication) to production personnel and management on the current state of production quality and any issues that arise., • Communication can/will include email, telephone, two-way radios, etc., • Ability to analyze quality data and decide whether to certify or reject specific products and communicate results appropriately., • Ability to prepare written documentation such as Non-Conforming Material Reports, Product Acceptance Records, Inspection Plans, Quality Alerts etc., • Ability to operate (but not limited to) the MahrShaft, Zoller Tool Presetter, Comparator, Air Gages, CMM’s, • Ability to participate in process and product audits in support of the Quality System (ISO Audits), • While this Job Location’s primary work area is designated, it is to be expected the Quality Inspector has full understanding and ability to perform within other job locations in the Quality Department in order to alleviate any issues that arise from staffing (Cross Trained for other locations/labs/QA roles), • Ability and willingness to perform other job duties as deemed necessary by the Quality Manager or management., • Adhere to guidelines and procedures to ensure the safe handling, removal, and disposal of both hazardous and non-hazardous materials., • Any other job duties as assigned. QUALIFICATIONS • High school diploma or equivalent (GED) plus 1-2 years of experience in a Quality Technician/Inspector role or equivalent experience., • Ability to read and understand Safety Rules, Standard Operating Procedures, Forms etc., • Ability to read and interpret engineering drawings, internal or external, including Dimensions, GD&T (Geometric Design and Tolerance), Parts Lists, Bills of Materials, Revisions & Changes, • Ability to operate complex measuring equipment such as Laser Measuring devices, surface profilometer, Coordinate Measuring Machine (CMM) etc. (Note: This does not require programming), • Ability to use hand measurement tools such as height gages, calipers, micrometers, air gages, thread rings and plugs, pitch micrometers etc., • Ability to complete routing forms and inspection documents and distribute as required., • Ability to apply problem solving techniques to work with production personnel in solving potential product and process problems encountered during manufacturing., • Ability to communicate effectively in a technical manner., • Possess strong computer skills. MS Office (Emphasis in Excel), Google Drive & Google Suite, • Desire to improve themselves, the quality system and instill a quality mentality into co-workers., • Ability to assist in the communication of the quality system requirements to other personnel. WORKING CONDITIONS • Adhere to all safety and quality system standards and principles., • It is to be expected that the Quality Inspector understands that laboratory environments are to be kept clean and tidy. PHYSICAL REQUIREMENTS • Ability to occasionally lift and/or move up to 50lbs safely., • Must have dexterity in order to quickly sort through items and remove/replace the parts needed during the manufacturing process(es), • Ability to use common hand and power tools. Export Control Compliance Notice This position may involve access to technology or software source code subject to U.S. export control laws (ITAR/EAR). Employment is contingent on verifying U.S. Person status or obtaining any necessary export license/confirming the availability of a license exception. Applicants must provide information for export control screening, which will be reviewed for compliance. DC Machine may elect not to pursue a license or exception and may decline to proceed with an applicant on that basis. 2nd shift: Monday-Thursday, 3:20pm-2:00am

Job Description Crane Service Technician Location: Lexington, KY | Full-Time | Reports to: Service Supervisor / Service Manager What You’ll Do As a Crane Service Technician at Mazzella, you’ll be on the front lines—helping customers by maintaining, repairing, and inspecting overhead cranes and hoists at their facilities. You'll troubleshoot electrical, mechanical, and structural issues, ensuring equipment is safe and working properly. This is a hands-on, customer-facing role that requires both technical expertise and strong people skills. Your day-to-day will include: • Performing on-site repairs and inspections on overhead crane and hoist systems, • Responding to emergency service calls, including after-hours and weekends (as needed), • Troubleshooting electrical and mechanical systems using testing tools and visual inspection, • Following all OSHA, ANSI, CMAA, and industry safety standards, • Communicating with customers, explaining your work, and getting sign-off, • Completing accurate service reports, time sheets, and inspection forms, • Keeping your tools, vehicle, and parts inventory in good order, • Supporting sales by identifying repair/replacement opportunitiesWhat You Bring We’re looking for someone who is experienced, self-motivated, and eager to grow with us. Preferred Qualifications: • High school diploma or technical/vocational training in electrical or mechanical fields, • 2+ years of hands-on experience in overhead crane or hoist repair, 4+ years preferred, • Strong skills in troubleshooting VFDs, brakes, motors, gearboxes, and control panels, • Familiarity with OSHA, CMAA, ANSI standards, • Valid driver’s license in good standing, • Comfortable with heights, lifting heavy parts (75+ lbs), and varied work hours, • Good computer skills (e.g., Microsoft Office) and ability to complete paperwork accurately, • Strong communication and customer service skillsBonus Points For:, • Overhead Crane Inspector certification (Level 3+), • Experience supporting sales or quoting repair work, • A passion for learning new technologies and toolsWhy Work at Mazzella? At Mazzella, we’re more than a company—we’re a family of 1,200+ people across 40 locations. We take care of our team because we believe that when you grow, we all grow. What We Offer: • Competitive pay + overtime opportunities, • Comprehensive benefits – health, dental, vision, life, disability, and 401(k) with company match, • Paid time off + paid holidays, • Free virtual doctor visits (Teledoc – $0 copay), • Tuition reimbursement – keep learning and we’ll support you, • Career growth – development programs and internal promotions, • A culture built on respect, teamwork, and integrityOur Core Values, • Be Safe – We prioritize everyone's well-being, • Be a Lifelong Learner – We never stop growing, • Be Humble – We win as a team, • Be Hungry – We go above and beyond, • Be Smart – We understand people and relationships Powered by JazzHR y9yXZRVDRg

Job Description Position Summary The Medical Gas Systems Design and Sales Consultant drives new asset deployment and medical gas equipment sales into new construction and major renovation projects across the assigned territory. This role owns the front end of the project: finding opportunities early, influencing the basis of design, developing and reviewing bid specifications, and converting that design influence into awarded medical gas pipeline and source equipment packages. This position is the face of MTA to contractors, engineers, and facilities in the territory. It is remote and field-based and works hand in hand with an assigned Project Manager who handles estimating, take-offs, and back-office project administration. The Consultant owns the relationship, the specification, and the sale; the Project Manager owns the estimate and the execution support behind it. Key Working Relationships • Reports to the Regional Manager – Central Region; aligns territory strategy, pricing posture, and pipeline priorities., • Partners daily with the assigned Project Manager, handing off documented scope, drawings, and specifications for estimating., • Coordinates with the MTA support center on quoting, order entry, and submittals, and with Service Managers on resourcing awarded projects., • Serves as the primary external contact for general contractors, mechanical contractors, engineers, and architects. Essential Job Functions New Construction Sales & Asset Deployment • Sell medical gas pipeline systems and source equipment — air compressors, vacuum pumps, manifolds, and alarms — into new construction and renovation projects., • Identify and pursue opportunities early in design, before equipment decisions are locked., • Own the full sales cycle from identification through proposal, negotiation, and award., • Meet or exceed an annual sales goal defined for each budget year., • Track all opportunities, activity, and forecasting in CRM and NetSuite. Specification & Bid Development • Develop and influence medical gas specifications to position MTA as basis of design., • Review drawings, Division 22 medical gas and vacuum specifications, and addenda to determine scope and competitive positioning., • Provide specification language, product data, and code guidance to consulting engineers and design teams., • Attend pre-bid meetings and job walks; document scope and site conditions for the Project Manager., • Identify scope gaps, exclusions, and alternates that affect pricing or risk, and escalate them before bid. Market Presence • Build and maintain key relationships with contractors, engineering firms, architects, and hospital facilities teams., • Conduct lunch-and-learns, product presentations, and continuing education sessions., • Represent MTA at industry associations, trade shows, and regional healthcare construction events., • Maintain a consistent, professional field presence through regular in-person customer contact. Project Handoff & Support • Provide the Project Manager complete scope, drawings, and customer requirements needed for accurate estimates., • Remain the customer-facing relationship owner through submittal, procurement, and execution., • Support the transition from award to installation, inspection, and verification., • Identify service, testing, certification, and maintenance opportunities generated by new construction awards. General • Maintain working knowledge of NFPA 99, applicable ASSE standards, and AHJ requirements across the territory., • Comply with company policies; submit accurate expense reports, activity reports, and forecasts on schedule., • Follow all safety protocols and wear appropriate PPE on job sites; remain quiet and respectful in hospital patient spaces., • Other duties as assigned by the Regional Manager. Travel • Primary territory: Tennessee, Kentucky, Indiana, and Ohio, with occasional requirements in neighboring states., • Up to 75% travel expected, including regular overnight stays., • Must reside within the territory near a major airport, with a valid driver’s license and clean driving record. Position Type / Expected Hours of Work • Full-time, exempt, remote/field-based; typical hours Monday–Friday but vary with customer, bid, and job site needs., • Occasional evening and weekend work required for bid deadlines and industry events. Qualifications Required • Proven outside sales results in a technical, capital equipment, construction, or building systems environment., • Ability to read and interpret construction drawings, specifications, and submittals., • Credibility with contractors, consulting engineers, and hospital facilities staff., • Strong communication, presentation, planning, and organizational skills; able to work independently in a remote role., • Basic understanding of financials, margin, and pricing fundamentals., • Proficient with Microsoft Office and CRM systems., • Valid driver’s license, clean driving record, and ability to travel up to 75%., • Commitment to the company’s core beliefs of integrity, safety, and customer service. Preferred • Medical gas experience, or a closely related trade such as mechanical, plumbing, or HVAC capital sales., • Working knowledge of NFPA 99 and medical gas system design requirements., • ASSE 6020 (Inspector), 6030 (Verifier), and/or 6060 (Designer) certification — a significant plus., • Existing contractor or engineering firm relationships in the Central Region., • Experience influencing basis-of-design specifications in healthcare construction. Compensation • Base salary — to be determined based on experience., • Commission based on a percentage of Net Profit Margin, per MTA commission policy, on all sales made directly by the New Construction Sales Consultant. Rate and structure to be determined., • Company-provided laptop and mobile phone, plus reimbursement of approved travel and business expenses per MTA policy. Physical Demands • Ability to walk active construction sites, mechanical rooms, and hospital environments, including ladders and stairs., • Ability to sit, stand, bend, and drive for extended periods, and lift up to 25 lbs., • Must be able to clearly communicate and hear instructions in busy job site and hospital environments.

KTA is recruiting full-time and part-time Certified Welding Inspectors (CWI) nationwide.

Quality Inspection Technician to ensure parts and materials meet blueprints and quality standards.You will inspect diverse parts with precision gauges and coordinate measuring equipment, aligning with customer specs and internal QA requirements.The role emphasizes tool calibration, data entry into E

Quality InspectorThe Quality Inspector is responsible for delivering comprehensive quality assurance, inspection, testing, and sustainment services supporting the SOF GLSS contract.

What You May Do Conduct inspections, security assessments, and regulatory-compliance reviews Evaluate airport, airline, and air-cargo security programs and procedures Inspect security processes, records, systems, facilities, and equipment Identify vulnerabilities, compliance concerns, and departures

Certified Welding Inspector (CWI)At UES, we're a team of more than 4,000 engineers, scientists, geologists, inspectors, technicians, and drillers united by a shared purpose—to make a meaningful impact in the communities we serve. UES is seeking a Certified Welding Inspector (CWI) to join our Lexin

The Quality Inspector is responsible for delivering comprehensive quality assurance, inspection, testing, and sustainment services supporting the SOF GLSS contract.

Quality Inspector Full Time Manual Labor Lexington, KY, US JOB PURPOSE The QualityInspectoris responsible forthe inspection, measurement, documentation of in-process and finished goods. QUALIFICATIONS High school diploma or equivalent (GED) plus 1-2 years of experience in a Quality Technician/Inspec

Staffmark Group in Lexington, KY is seeking a Quality Inspector to join our warehouse team.

Quality InspectorThe Quality Inspector is responsible for the inspection, measurement, documentation of in-process and finished goods. Ability to operate (but not limited to) the MahrShaft, Zoller Tool Presetter, Comparator, Air Gages, CMM’sAbility to participate in process and product audits in s

Job Number 727597BR Description: You will be the Quality Assurance Inspector for Lockheed Martin Missiles & Fire Control in Lexington, KY. What You Will Be Doing As the Quality Inspector, you will be responsible for executing inspection and test methodologies on parts, components, and asse

The Quality Inspector is responsible for delivering comprehensive quality assurance, inspection, testing, and sustainment services supporting the SOF GLSS contract.

Job Number 727597BR Description: You will be the Quality Assurance Inspector for Lockheed Martin Missiles & Fire Control in Lexington, KY. What You Will Be Doing As the Quality Inspector, you will be responsible for executing inspection and test methodologies on parts, components, and asse

Job Description Construction Materials Engineering Technicians Requisition Number: 2026-1360-14 This isn't a desk job. Your workplace is a construction site. You'll spend your days outside, working around active construction. Are you interested in learning how you can grow or take your career to the next level with a leading civil engineering and consulting team where you'll test concrete, soils, and asphalt to help build safe, long‑lasting construction projects? Join our New Albany, Indiana Construction Services team as a Construction Materials Engineering Technician. Build Your Career. Own Your Future. At S&ME, you're more than just an employee; you're an employee-owner of a 100% employee-owned company that has been solving complex geotechnical, civil, environmental, and construction materials testing challenges for over 50 years. We're invested in your success and offer a career path with growth opportunities, training, and hands-on experience. Join a team that values safety, integrity, and teamwork while offering industry-leading benefits designed to help you thrive - on and off the job, including but not limited to: • Medical, Dental & Vision Plans with HSA and FSA options, • Wellness Program - $50 off per month on your 2027 premiums!, • 100% Employee Stock Ownership Plan (ESOP) with a minimum 5% company contribution & automatic enrollment, no matter your role, • 401(k) Retirement Plan, • Paid Holidays and Paid Time Off (PTO) - with rollover options, • Paid Maternity & Parental Leave, • Pet Insurance, • Mentorship & Career Development Programs, • Credential Incentive Program - get rewarded for advancing your skills, • Tuition Reimbursement, • Employee Recognition Program, • Company Vehicle & Fuel Card - for project-based roles, • $2,000 Employee Referral Bonuses - and more! Your Role: Hands-On, Impactful, and Fast-Paced As a Construction Materials Engineering Technician, you'll play a vital role in ensuring construction projects, from local eateries to major sports venues, are built with quality and safety at the forefront. Whether you're new to the field or bring years of expertise, you'll receive hands-on training, mentorship, and opportunities to advance. Seasoned professionals can take on leadership roles, guiding projects and mentoring colleagues. What You'll Do: • Field & Lab Testing: Performing field and laboratory testing on construction materials like concrete, asphalt, soil, and aggregates., • Sample Collection & Prep: Collecting and preparing samples for analysis., • Data Interpretation & Reporting: Interpreting test results and preparing detailed reports., • Team Collaboration & Compliance: Working closely with engineers, contractors, and project managers to ensure all work meets specifications and safety guidelines. What We Are Looking For: • High school diploma or equivalent required; associate degree in a related field preferred for advanced levels, • Technician II: 2+ years of relevant experience or equivalent with an associate degree, • Technician III: 3+ years of relevant experience or equivalent with an associate degree, • Technician IV: 5+ years of relevant experience; prior leadership or mentoring experience is a plus, • Active Industry certifications such as: American Concrete Institute (ACI): Field Testing Grade I, strongly preferred; Strength Testing Technician; Laboratory Technician and/or International Code Council (ICC): Special Inspector, Reinforced Concrete and Masonry, • Strong English communication skills (verbal and written), • Basic math proficiency, including understanding of measurements and units of weight, • The understanding of a fluctuating schedule and interest in occasional travel Compensation and technician level will be based on experience and industry certifications. What to Expect: Field Work, Schedule & Travel This position is primarily based outdoors on active construction sites. Work schedules may vary based on project needs and weather conditions and can include early mornings, evenings, weekends, occasional holidays, and overtime opportunities paid at time-and-a-half. Some travel may be required to support projects across the region. With the use of Company-provided Personal Protective Equipment (PPE), you should be comfortable: • Working outdoors in varying weather conditions, • Traveling to project sites as needed, • Walking over rough, uneven terrain and standing for extended periods, potentially up to 12 hours per day, • Routinely lifting and carrying 40-50 pounds of equipment and materials, • Safely maneuvering field equipment around active construction sites Why Join Us? At S&ME, your career growth matters; you matter. You'll receive professional training, mentorship, and support to work on challenging projects and be part of a company that truly invests in its people. Every employee benefits from our employee-ownership program, no matter your role. This is more than a job; it's a chance to build a long-term career in the engineering and construction industry. Ready to Get Started? Apply today and take the first step toward an exciting future with S&ME! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Quality Inspector Quality-Lexington Full Time Manual Labor Lexington, KY, US 30+ days ago Requisition ID: 4344 JOB PURPOSE The QualityInspectoris responsible forthe inspection, measurement, documentation of in-process and finished goods. Parts may be designated by production for QA verification; how

Johnson Controls is seeking a Sprinkler Inspector III to perform routine inspections and preventative maintenance on sprinkler and suppression life safety systems.