Trabajos manufacturing production en Spring Valley, New York - Page 2Crear alertas

Job DescriptionDescription: The assembly operator oversees and operates machines necessary to swage cable, to perform cable end treatments, to swage fittings, to cut or trim cable, to grind assemblies to length and to assemble cable components. Counts packages and labels completed cable assemblies. This position is responsible to maintain acceptable production outputs and quality of wire/cable assembly. Duties and Responsibilities: • Takes and follows directions from both, operational performance and job requirements from Supervisors, Facilitators on a job by job basis., • Clear area of previous job materials., • Completes job cards, routers and job documentation as required., • Operates lathes, welders, presses, grinders, cable cutters, swagers, packaging equipment and other equipment necessary to manufacture cable assemblies., • Maintains material traceability by completing records of materials usage for each job., • Monitors and performs visual and tactile inspection of assembled parts., • Performs proof-loading of assembled parts., • Gathers samples for start-up and in-process testing and inspection., • Packages and labels processed material according to job card instructions., • Reports part or process quality issues to their supervisor or any quality personnel., • Any other duties as assigned by supervisor. Requirements: • Prior experience is preferred but not required., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Ability to analyze data and make recommendations., • Ability to troubleshoot manufacturing defects., • Strong interpersonal skills., • Ability to seek and accept feedback from others., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g. standing, sitting, walking throughout the facility and stairs. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), a typical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job DescriptionDescription: Who We Are RK Pharma is a pharmaceutical organization focused on developing and manufacturing high-quality, affordable drug products through disciplined execution and strong internal collaboration. We operate in regulated environments where quality, consistency, and sound judgment matter every day. We value people who do careful work, build strong systems, and take pride in establishing processes that hold up over time — not just during inspections. About the Role This role is a leadership position responsible for establishing, managing, and continuously improving microbiology operations within a GMP environment. The position plays a critical role in building systems, supporting growth projects, and maintaining a state of control across microbiology, validation, and quality documentation. This role will be well-suited for an experienced microbiology leader who enjoys building programs, mentoring teams, and working cross-functionally in developing or expanding facilities. We want to be transparent: this role is best suited for someone comfortable working in a growing organization, where systems are being strengthened and built thoughtfully, rather than one that already has every structure in place. Key Responsibilities • Lead day-to-day microbiology operations in compliance with GMP requirements, • Establish, implement, and maintain microbiology quality systems, SOPs, and documentation, • Support validation and qualification activities including IQ, OQ, PQ for microbiology labs and production areas, • Oversee environmental monitoring, water systems, sterility assurance, and contamination control programs, • Support audit readiness, inspections, and regulatory interactions, • Collaborate with Quality Assurance, Manufacturing, Validation, and Engineering teams, • Support new projects, expansions, and technology implementation, • Manage and mentor microbiology staff and contractors, • Work with external vendors and service providers for calibration, validation, and testing activities What We’re Looking For Required • Advanced degree in Microbiology or a related scientific discipline, • Significant experience leading microbiology operations in a GMP pharmaceutical environment, • Strong background in microbiological testing, environmental monitoring, validation, and compliance, • Experience establishing or strengthening microbiology quality systems, • Comfort working in growing or evolving organizations, • Strong documentation, audit, and regulatory readiness experience, • Collaborative leadership style with a focus on steady execution Preferred • Experience supporting new facility start-ups or expansions, • Experience leading microbiology functions across multiple sites RK Pharma is a growing organization. While this role offers meaningful leadership scope and impact, candidates should be comfortable with no relocation support at this time, evolving organizational structures, and a deliberate pace of growth focused on long-term stability rather than short-term incentives. We believe in being honest upfront so that this role works well for both the individual and the organization. How We Work At RK Pharma, quality comes before speed. We value clear communication, early escalation, and disciplined decision-making. Leaders here are expected to build calm, reliable systems and support teams without creating unnecessary urgency or hierarchy. People who are successful here tend to be steady, thoughtful, and confident in building strong foundations. What We Offer • A leadership role with real impact on systems and culture, • The opportunity to shape microbiology operations and quality infrastructure, • A respectful, collaborative working environment, • Clear expectations and support from senior leadership Equal Opportunity Employer RK Pharma is an equal opportunity employer committed to fair, consistent, and respectful hiring practices. Requirements:

Job Description The Press Operator is responsible for the safe and efficient operation of a press while adhering to customer specification, quality requirements, company standards, and guideline and safety standards. This position is responsible for the overall completion of the job assigned to the Press Operator 1st 6:05am - 04:25pm and 2nd shift 4:20pm - 2:40am Monday - Thursday. Mandatory over-time on Fridays. • Inspections of printed material to ensure the correctness in all areas of color, registration, stock, and all other customer specifications., • Adjusting and maintaining registration, color, perforations, and other customer specific printing specifications., • Observes the press operations to detect any machine or equipment malfunctions and moves to correct the issues., • Makes adjustments to all press machine parts and equipment: feeders, grippers, guides, feed wheels, cameras, and other machines parts, using proper equipment., • Conducts a visual inspection prior to printing of all material stock and ink for defects or noncompliance to job specifications., • Carries out the final inspection to ensure the material, ink, plates or screens, cylinder/rollers, tension, and all other necessary customer specifications are correct prior to the start of the running the job., • Review and interpret job specifications and work order instructions, delegates or carries out directions as needed., • Ensures all job-related data (time and material) are entered into the ERP system (DISO)., • Ensures all unused material goes back to the designated area after each job is finished running., • Knowledge of cGMP, ISO and Lean Manufacturing is a plus. Reading, analyzing, and interpreting technical procedures, manuals and manufacturing documents including the system of Graphic specification/Graphic identical/Articles., • Experience with inks and material., • High School Diploma or General Equivalent Degree (GED), • Experience with handling and proper caring of die cutting tools., • Experience with machine set-up, • Experience with UV and water-based inks preferred., • Experience working with vision systems preferred., • Working knowledge of quality procedures in the pharmaceutical industry preferred., • Ability to lift 50 pounds., • Standing for long periods of time.

Job Description Indus Precision Manufacturing is seeking an experienced CNC Machinist / Programmer to join our growing team. We are a family-owned AS9100D & ISO 9001:2015 certified precision manufacturing company serving the aerospace, defense, semiconductor, and commercial industries. This position is ideal for someone who enjoys hands-on machining, problem solving, and working on a wide variety of precision parts and assemblies. Responsibilities: • Program, set up, and operate CNC milling and/or turning centers, • Interpret engineering drawings, GD&T, and process requirements, • Optimize machining processes for quality and efficiency, • Select tooling, workholding, and machining strategies, • Perform in-process inspections using standard inspection equipment, • Work closely with engineering, quality, and production teams, • Experience programming CNC machines (Mastercam, Fusion 360, or similar), • Strong understanding of machining practices, tooling, and feeds/speeds, • Ability to read blueprints and understand GD&T, • Experience with aerospace, defense, or semiconductor work preferred, • Strong attention to detail and commitment to quality, • Work on challenging aerospace, defense, and semiconductor projects, • Team-oriented environment, • Stable, growing company with diverse work, • Competitive pay based on experience Company DescriptionIndus Precision Manufacturing is a family-owned precision manufacturing company specializing in CNC machining, fabrication, assembly, and inspection services for the aerospace, defense, semiconductor, and commercial industries. Located in Congers, NY, Indus is AS9100D and ISO 9001:2015 certified, ITAR registered, and committed to delivering high-quality components with fast turnaround times, technical expertise, and exceptional customer service.Indus Precision Manufacturing is a family-owned precision manufacturing company specializing in CNC machining, fabrication, assembly, and inspection services for the aerospace, defense, semiconductor, and commercial industries. Located in Congers, NY, Indus is AS9100D and ISO 9001:2015 certified, ITAR registered, and committed to delivering high-quality components with fast turnaround times, technical expertise, and exceptional customer service.

Job DescriptionDescription: The Spooling Inspector is in charge of checking all cable used in production to determine defects that may affect quality of the final product. Duties and Responsibilities: • Inspects and tests coated or uncoated wire and cable for such properties as electrical resistance, size, and tactile inspection to verify their conformance to specifications., • Reads written specifications or receives oral instructions and determines work aids required and inspection procedures., • Measures wire/cable for size, and defects using micrometers and fixed gauges., • Examines wire for defects, such as pits, scratches, and burnt surfaces., • Records test results and informs supervisor when wire varies from specifications., • Respools cables according to customers specification and perform final inspections of spools., • Any other duties as assigned by supervisor.Requirements:, • Six months to one year of work experience is preferred., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Must be capable and willing to share knowledge and train associates., • Ability to analyze data and make recommendations., • Ability to troubleshoot manufacturing defects., • Strong interpersonal skills., • Ability to seek and accept feedback from others., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc., • Ability to lift items weighing 10-15 lbs. Pay: $17.00 - $17.00/ hour Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job DescriptionDescription: The assembly operator oversees and operates machines necessary to swage cable, to perform cable end treatments, to swage fittings, to cut or trim cable, to grind assemblies to length and to assemble cable components. Counts packages and labels completed cable assemblies. This position is responsible to maintain acceptable production outputs and quality of wire/cable assembly. Duties and Responsibilities: • Takes and follows directions from both, operational performance and job requirements from Supervisors, Facilitators on a job by job basis., • Clear area of previous job materials., • Completes job cards, routers and job documentation as required., • Operates lathes, welders, presses, grinders, cable cutters, swagers, packaging equipment and other equipment necessary to manufacture cable assemblies., • Maintains material traceability by completing records of materials usage for each job., • Monitors and performs visual and tactile inspection of assembled parts., • Performs proof-loading of assembled parts., • Gathers samples for start-up and in-process testing and inspection., • Packages and labels processed material according to job card instructions., • Reports part or process quality issues to their supervisor or any quality personnel., • Any other duties as assigned by supervisor. Requirements: • Prior experience is preferred but not required., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Ability to analyze data and make recommendations., • Ability to troubleshoot manufacturing defects., • Strong interpersonal skills., • Ability to seek and accept feedback from others., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g. standing, sitting, walking throughout the facility and stairs. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), a typical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job Description JOB SUMMARY: The Facilities Civil Engineer is responsible for the design, analysis, and repair of concrete and steel structures. They will work together with Mechanical and Electrical Engineers on capital improvement projects to optimize quality while keeping to a schedule and budget. The Facilities Civil Engineer must be project oriented and able to work well in a team environment. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Evaluate machinery layouts and design foundations based on requirements., • Design infrastructure support for machinery., • On-site supervision of civil and millwright contractors during projects., • Perform on-site surveys and update plant records and layouts as needed. KNOWLEDGE, SKILLS AND ABILITIES: • Knowledge of drafting standards and tolerances., • Experience with AutoCAD 2D layouts., • Experience with 3D modeling is a plus., • Organized record keeping skills., • Ability to create bid packages and work with outside vendors for RFQs. EDUCATION AND WORK EXPERIENCE: • The candidate must have a Bachelor of Science degree in Civil, Structural, or Construction Engineering, and a working knowledge of foundation design., • They must also have formal training in drafting techniques and standards., • The ideal candidate will have working experience in a construction environment, and the ability to work with contractors., • Minimum of 3 years' experience preferred, • Exposure to manufacturing environments is a plus. TRAVEL REQUIREMENTS: YES ☒ NO ☐ Travel requirements will consist of 35% to 50% during periods of increased project work. A 25% typical travel requirement can be expected otherwise. The Okonite Company is an Equal Opportunity Employer Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. This description reflects management’s assignment of essential functions; it does not proscribe or restrict the tasks that may be assigned. This job description is subject to change at any time. Company DescriptionThe Okonite Company was founded in 1878, making it one of the original insulators of electrical wire and cable in the United States. Earliest customers included Samuel F.B. Morse for his telegraph network and Thomas A. Edison for the Pearl Street Generating Station, the nation's first, built in New York City in 1882. In June 1976, Okonite became the largest company in the United States to be owned by its employees through an Employees' Stock Ownership Trust. As such, Okonite employees have a unique vested interest in the quality and service we provide. Today, Okonite is headquartered in Ramsey NJ, approximately 30 miles northwest of New York City. At our six (6) manufacturing facilities, we make cables that range from 300V to 345kV insulated products that include Instrumentation, Power and Control, Medium Voltage, and High Voltage cables. Okonite serves a multitude of markets including Electric Utility (Distribution, Transmission, and Generation including fossil and nuclear), Oil & Gas (refineries and production platforms), Chemical, Military bases, Railroad, Transit and Pulp & Paper. In addition, we provide cables to various other industrial customers in areas of Hospitals, Colleges & Universities, Water Treatment Plants and Data Centers. With today's focus on renewable energy, Okonite cables can be found at Wind Farms, Solar Farms, and Biofuel generating facilities.The Okonite Company was founded in 1878, making it one of the original insulators of electrical wire and cable in the United States. Earliest customers included Samuel F.B. Morse for his telegraph network and Thomas A. Edison for the Pearl Street Generating Station, the nation's first, built in New York City in 1882. \r\n\r\nIn June 1976, Okonite became the largest company in the United States to be owned by its employees through an Employees' Stock Ownership Trust. As such, Okonite employees have a unique vested interest in the quality and service we provide. \r\n\r\nToday, Okonite is headquartered in Ramsey NJ, approximately 30 miles northwest of New York City. At our six (6) manufacturing facilities, we make cables that range from 300V to 345kV insulated products that include Instrumentation, Power and Control, Medium Voltage, and High Voltage cables. \r\n\r\nOkonite serves a multitude of markets including Electric Utility (Distribution, Transmission, and Generation including fossil and nuclear), Oil & Gas (refineries and production platforms), Chemical, Military bases, Railroad, Transit and Pulp & Paper. In addition, we provide cables to various other industrial customers in areas of Hospitals, Colleges & Universities, Water Treatment Plants and Data Centers. With today's focus on renewable energy, Okonite cables can be found at Wind Farms, Solar Farms, and Biofuel generating facilities.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Teledyne LeCroy is a leading manufacturer of high-performance electronic test and measurement equipment located in Chestnut Ridge, NY (Rockland County, NY). Our team consists of passionate and experienced engineers, technicians, and assemblers who work on a wide range of problems in a highly collaborative work environment. We are currently looking for a Production Assembler to support the manufacturing team in the production of oscilloscopes, probes, and cables. Responsibilities: \n • Execute documented assembly procedures, both electrical and mechanical:\n, • Product assembly by using a microscope and/or hand tools.\n, • Hand soldering assembly of high precision small components.\n\n\n, • Perform data entry into the manufacturing database.\n, • Attend cell meetings:\n, • Participate in cost reduction and process improvement initiatives.\n, • Communicate issues, concerns, and questions to manufacturing engineering.\n\n\n\n Education and Experience: • High school diploma or equivalent.\n Required Job Knowledge and Skills: \n • Good eye/hand coordination.\n, • Must be able to perform repetitive assembly work.\n, • Ability to work in a fast-paced environment.\n, • Must be able to read and understand English.\n, • Clear communication skills, both verbal and written.\n, • Must be able to work well in a team environment and independently.\n, • Must be able to maneuver 25 lb. equipment.\n\n Preferred Job Knowledge and Skills: \n • Soldering experience\n, • Microscope experience\n, • Genuine interest in manufacturing as a career path\n, • IPC J-Std-001 and/or IPC-A-610\n, • Experience with UV glue or epoxy\n, • Above average computer skills (Microsoft Office)\n, • Ability to read and understand PCBA documents, diagrams, and schematics\n\n Salary Range: $34,300.00-$45,700.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Teledyne LeCroy is a leading manufacturer of high-performance electronic test and measurement equipment located in Chestnut Ridge, NY (Rockland County, NY). Our team consists of passionate and experienced engineers, technicians, and assemblers who work on a wide range of problems in a highly collaborative work environment. We are currently looking for a Production Assembler to support the manufacturing team in the production of oscilloscopes, probes, and cables. Responsibilities: \n • Execute documented assembly procedures, both electrical and mechanical:\n, • Product assembly by using a microscope and/or hand tools.\n, • Hand soldering assembly of high precision small components.\n\n\n, • Perform data entry into the manufacturing database.\n, • Attend cell meetings:\n, • Participate in cost reduction and process improvement initiatives.\n, • Communicate issues, concerns, and questions to manufacturing engineering.\n\n\n\n Education and Experience: • High school diploma or equivalent.\n Required Job Knowledge and Skills: \n • Good eye/hand coordination.\n, • Must be able to perform repetitive assembly work.\n, • Ability to work in a fast-paced environment.\n, • Must be able to read and understand English.\n, • Clear communication skills, both verbal and written.\n, • Must be able to work well in a team environment and independently.\n, • Must be able to maneuver 25 lb. equipment.\n\n Preferred Job Knowledge and Skills: \n • Soldering experience\n, • Microscope experience\n, • Genuine interest in manufacturing as a career path\n, • IPC J-Std-001 and/or IPC-A-610\n, • Experience with UV glue or epoxy\n, • Above average computer skills (Microsoft Office)\n, • Ability to read and understand PCBA documents, diagrams, and schematics\n\n Salary Range: $34,300.00-$45,700.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Teledyne LeCroy is a leading manufacturer of high-performance electronic test and measurement equipment located in Chestnut Ridge, NY (Rockland County, NY). Our team consists of passionate and experienced engineers, technicians, and assemblers who work on a wide range of problems in a highly collaborative work environment. We are currently looking for a Production Assembler to support the manufacturing team in the production of oscilloscopes, probes, and cables. Responsibilities: \n • Execute documented assembly procedures, both electrical and mechanical:\n, • Product assembly by using a microscope and/or hand tools.\n, • Hand soldering assembly of high precision small components.\n\n\n, • Perform data entry into the manufacturing database.\n, • Attend cell meetings:\n, • Participate in cost reduction and process improvement initiatives.\n, • Communicate issues, concerns, and questions to manufacturing engineering.\n\n\n\n Education and Experience: • High school diploma or equivalent.\n Required Job Knowledge and Skills: \n • Good eye/hand coordination.\n, • Must be able to perform repetitive assembly work.\n, • Ability to work in a fast-paced environment.\n, • Must be able to read and understand English.\n, • Clear communication skills, both verbal and written.\n, • Must be able to work well in a team environment and independently.\n, • Must be able to maneuver 25 lb. equipment.\n\n Preferred Job Knowledge and Skills: \n • Soldering experience\n, • Microscope experience\n, • Genuine interest in manufacturing as a career path\n, • IPC J-Std-001 and/or IPC-A-610\n, • Experience with UV glue or epoxy\n, • Above average computer skills (Microsoft Office)\n, • Ability to read and understand PCBA documents, diagrams, and schematics\n\n Salary Range: $34,300.00-$45,700.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Great company Benefits/ $$$ This Jobot Job is hosted by: Billy Mewton Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $27 - $32 per hour A bit about us: Jobot is seeking a hands-on Production Technician on behalf of a leading manufacturing company. The Production Technician will be responsible for operating, maintaining, and troubleshooting production equipment to ensure efficient, safe, and high-quality manufacturing processes. This role is ideal for individuals with strong mechanical or technical skills who thrive in a fast-paced production environment. Why join us? health and disability insurance life insurance an outstanding 401(k) plan flexible spending accounts, EAP parental leave, paid time off company-paid holidays Job Details Job Details: As a Permanent Production Technician, you will play a pivotal role in our dynamic engineering team. This position offers an exciting opportunity to contribute to the production process, ensure the efficiency of our operations, and drive continuous improvement initiatives. You will be working in a fast-paced, high-tech environment where innovation, teamwork, and the ability to take on challenges are highly valued. Responsibilities: 1. Oversee the daily operations of the production line, ensuring efficiency, consistency, and safety at all times., 2. Collaborate with the engineering team to troubleshoot and resolve any issues that may arise during the production process., 3. Implement and monitor quality control procedures to maintain high standards of production., 4. Assist in the development and implementation of new manufacturing processes and technologies., 5. Conduct regular inspections and maintenance of production machinery and equipment to prevent malfunctions and ensure optimal performance., 6. Monitor and control inventory of raw materials and finished products., 7. Participate in training sessions and workshops to enhance technical skills and knowledge., 8. Comply with all company policies and regulations, as well as relevant health and safety laws., 9. Contribute to the continuous improvement of production processes by suggesting and implementing innovative solutions. Qualifications: 1. A degree in a technical field such as Engineering, Manufacturing, or a related discipline., 2. A minimum of 5 years of experience in a production environment, preferably in the engineering industry., 3. Solid understanding of production processes, quality control, and other techniques for maximizing the effective manufacture and distribution of goods., 4. Proficiency in using various types of manufacturing machinery and tools., 5. Strong problem-solving skills and the ability to troubleshoot technical issues., 6. Excellent communication and teamwork skills, with the ability to collaborate effectively with colleagues at all levels., 7. Ability to work under pressure and meet production deadlines., 8. Strong attention to detail and commitment to producing high-quality work., 9. Knowledge of health and safety regulations in a production environment., 10. Willingness to stay updated on new technologies and production techniques in the engineering industry. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Frazier Industrial Company, the Material Handling Industry Leader in structural steel storage racking and ASRS structural buildings is seeking a full-time Project Manager/Coordinator. This position, located in Long Valley, NJ, will coordinate all aspects of assigned projects to ensure all deliverables are executed to the terms of the orders. The Project Manager/Coordinator will compile project status reports, coordinate project schedules and will be the primary point of contact with the customer. Responsibilities include; • project scope definition, monitoring of engineering and manufacturing schedules, coordination of third-party purchases and the coordination of material deliveries to project sites., • The position is available to recent graduates and candidates with up to 5 years’ experience in construction, project management, project engineering or project coordination in building or related field., • Material handling experience is a plus. Bachelor’s degree in civil engineering, structural engineering or construction management is preferred. Frazier Industrial Company is the largest manufacturer of racking systems, with its headquarters located in Long Valley, NJ. FRAZIER’s blue and orange pallet rack is quickly recognized for its durability and custom engineered design. From standard pallet rack systems to complex pick-to belt towers, AS/RS installations or Rack Supported Buildings, FRAZIER’s expert team of engineers help each customer design the best, most cost-effective Storage Solutions. FRAZIER has become the leading producer of structural steel pallet rack with the most production capacity in the industry. With our network of 10 fabrication facilities, strategically located throughout North America, FRAZIER guarantees manufacturing flexibility while meeting tight construction deadlines. We offer competitive pay and excellent benefits

Aerotek - JobID: JP-005852673 [Production Operator / Assembly Line Worker] As a Manufacturing Associate at Aerotek, you'll: Operate assembly equipment and/or second-operation machines; Perform inspecting, trimming, testing, fixturing, assembling and packaging products; Troubleshoot and repair electr

This role is responsible for providing exceptional support to customers and internal teams by accurately entering and managing order-related data in a fast-paced contract manufacturing environment.This role serves as a critical link between clients, production, and supply chain teams, ensuring timel

Production Worker Location: Orangeburg, NY Pay rate: $19.00-22.00 per hour (based off of experience) plus 10% shift differential Shifts: 2nd shift 2:00pm-10:30pm Position Summary Performs basic filling and packaging functions, and formulations as required, in support of Coagulation, Clinical Chemistry and Critical Care product lines; uses automated and manual methods in accordance with established Quality standards and CGMP's. Responsibilities • Responsible for the setup and operation of filling, labeling, capping and packaging equipment. Responsible for the routine preventive maintenance, general troubleshooting, and general cleanliness of filling, labeling, capping, lyophilizing and packaging equipment., • Maintains all production areas in a clean and orderly manner which is consistent with Good Manufacturing Practices., • Completes work orders in an accurate, complete and detailed manner., • Performs all duties assigned in safe manner consistent with Company safety policies., • Background screening, • Reliable transportation, • High School Diploma or equivalent, • Health insurance, • Health savings account, • Dental insurance, • Vision insurance, • Flexible spending accounts, • Life insurance

The Senior Maintenance Technician will lead maintenance activities in a GMP-regulated pharmaceutical manufacturing environment, ensuring reliable operation of production and facility systems. Perform and oversee preventive, predictive, and corrective maintenance on pharmaceutical manufacturing and f

Job Description This role is responsible for providing exceptional support to customers and internal teams by accurately entering and managing order-related data in a fast-paced contract manufacturing environment. This role serves as a critical link between clients, production, and supply chain teams, ensuring timely and accurate order processing, documentation, and communication. Hourly Wage: $24/hr Key Responsibilities: Order Processing & Data Entry: • Accurately enter customer orders, revisions, and specifications into Elements Connect., • Review purchase orders for completeness, pricing accuracy and lead times., • Serve as a point of contact for customer inquiries regarding order status, lead times, and shipment schedules., • Provide timely responses via email and phone, maintaining a professional and courteous tone., • Collaborate with cross-functional teams including production, QA, and logistics to resolve order-related issues or discrepancies., • Monitor open orders and proactively follow up to ensure timely fulfillment., • Ensure all data entry complies with company SOPs and industry regulations., • Help maintain accurate and audit-ready records for quality assurance and customer compliance., • Support quality documentation processes related to customer complaints or returns, if needed. Requirements • High school diploma or GED required., • Associate’s degree in Business, Supply Chain, or a related field preferred., • 1–3 years of customer service, order processing, or administrative coordination experience preferred., • Proficient with Microsoft Office Suite, • Strong attention to detail and accuracy in data entry, • Clear written and verbal communication skills, • Ability to multi-task, prioritize, and stay organized in a fast-paced environment, • Willingness to learn internal systems and follow standard operating procedures, • Positive, professional attitude and ateam-oriented mindset Benefits • Comprehensive Health Benefits package (Medical, Dental, Vision, Life, AD&D), • Competitive 401(k) match, • Paid time off (Vacation, Sick, Holiday, Summer Fridays), • Monthly birthday celebrations + other fun activities!, • Daily subsidized meals iLABS (Innovation Labs) Inc. is an equal opportunity employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other characteristic protected by federal, state or local laws. All employment is decided on the basis of qualifications, merit, and business need.

Well-established and expanding pharmaceutical manufacturer seeks 2 Manufacturing/Granulation Associates. Operates pharmaceutical production machinery and follows the procedures for manufacturing such as weighing, blending, dispensing, mixing, coating, encapsulating, granulating, drying, milling, ble

Pick order requisitions for internal production and service center. Package, label, and prepare materials for production, service and outbound shipments in our ERP system. Prepare kits of material for assembly production and distributes to manufacturing.

Our client in Blauvelt, NY is searching for a Tool & Die Technician to support their manufacturing team! Shift: 8:00 AM - 4:30 PM Monday - Friday Pay: $25 - $32 / hr (dependent on experience) JOB SUMMARY The Tool & Die Tech I is responsible for the maintenance, assembly, and troubleshooting of tooling and dies. The role focuses on cleaning, preventive maintenance, and efficient troubleshooting while ensuring adherence to safety procedures and quality standards. Machine shop skills, precision measurements and required tools. The primary duties include safe and precise tool and die installation and uninstallation. Attention to the procedures established for pre-setup, disassembly, and auxiliary equipment installations. RESPONSIBILITIES • Perform tool changes on precision machines, focusing on the installation and uninstallation of tooling and dies., • Execute detailed tool and die cleaning, sharpening and assembly, ensuring preventive maintenance to avoid production delays., • Troubleshoot tooling and dies efficiently, minimizing machine downtime and ensuring product quality., • Follow the exact procedures for pre-setup, disassembly, and equipment installation., • Read and interpret blueprints, diagrams, and geometric dimensioning to ensure proper assembly and adjustments., • Use technical mathematics to perform precise measurements and calculations for precision machine setup., • Maintain documentation of maintenance activities and report issues to the Maintenance Supervisor and area Manager., • Apply safety measures like Lock Out/Tag Out and ensure compliance with PPE requirements., • Use basic measurements elements with caliper, micrometer, dial indicators., • Perform basic pneumatic assemblies, • Support the trial and implementation of new tooling and dies, providing feedback on performance and fit., • Participate in continuous improvement initiatives to optimize tool and die maintenance practices., • Engage in training programs to remain current with technological advancements tool and die handling., • Assist with audits and inspections to ensure all maintenance practices comply with quality and safety standards., • Associates degree OR 3-5 years of related experience, • Blueprint Reading: Basic knowledge of mechanical blueprints, geometric dimensioning, and tolerancing., • Tool and Die Handling: Experience in maintenance, assembly, and troubleshooting., • Technical Mathematics: Proficiency in mathematical calculations for technical tasks., • Use of measurement tools for quality checks., • CAD Concepts: Basic understanding of CAD modeling., • Machine Shop Skills: Experience in turning, milling, drilling, grinding, and fastener/thread applications. (optional), • Safety Procedures: Strong commitment to workplace safety and knowledge of Lock Out/Tag Out practices., • Quality & Labeling Fundamentals: Understanding of quality assurance and proper labeling practices. TRC Talent Solutions is proud to be an Equal Opportunity Employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, protected veteran status, disability status, sexual orientation, gender identity or expression, marital status, genetic information, or any other characteristic protected by law.

Job DescriptionDescription: About RK Pharma RK Pharma is a pharmaceutical organization focused on delivering high-quality, affordable drug products through disciplined execution and strong internal collaboration. While our work happens behind the scenes, it depends on clean, controlled, and well-maintained environments every single day. We value people who take pride in doing essential work well, support the teams around them, and understand that consistency and care matter. About the Role The Janitor / Facilities Cleaner plays an important role in maintaining clean, safe, and compliant workspaces across RK Pharma facilities. This position helps ensure that offices, manufacturing areas, and common spaces meet cleanliness, safety, and GMP expectations. This role is ideal for someone who is dependable, detail-oriented, and comfortable working within structured routines. Success comes from consistency, care, and taking pride in work that supports everyone else doing their jobs safely and effectively. Key Responsibilities • Clean and maintain assigned areas, including offices, common areas, restrooms, and production support spaces, • Follow approved cleaning procedures and schedules, including GMP-related requirements where applicable, • Properly handle and store cleaning supplies and equipment, • Document cleaning activities as required, • Report maintenance issues, safety concerns, or unusual conditions promptly, • Support special cleaning needs (e.g., spill response, inspections, shutdowns) as requested, • Work respectfully and cooperatively with Manufacturing, Quality, and Facilities teams What We’re Looking For Required • Ability to follow written and verbal instructions (English preffered), • Dependable attendance and punctuality, • Comfort performing routine, physical, and repetitive tasks, • Attention to detail and care in completing work, • Prior experience in janitorial, custodial, or facilities cleaning roles, • Experience working in regulated, industrial, or GMP environments, • Familiarity with cleaning logs or documentation How We Work At RK Pharma: • Cleanliness and safety are taken seriously, • Procedures are followed for a reason, • Helpfulness and respect are expected at all levels Physical & Work Environment Requirements • Ability to stand, walk, bend, and lift for extended periods, • Ability to use cleaning tools and equipment safely, • Ability to work around manufacturing and office environments, • Compliance with PPE, safety, and hygiene requirements What We Offer • A stable and respectful work environment, • Clear expectations and consistent routines, • Training on procedures and safety requirements, • The opportunity to contribute to a workplace that depends on cleanliness and care Equal Opportunity Employer RK Pharma is an equal opportunity employer. We are committed to fair, consistent, and respectful hiring practices. Requirements:

Job Description 613 Originals, an established leader in screen-printing industry, is seeking an experienced IT Project Manager to lead cross-functional technology initiatives with a strong focus on Agile delivery, ERP systems, and operational efficiency. This is a new role within a large and still growing team of collaborators and innovators, with a company that provides competitive salary and benefits. If you are interested in a work environment that values teamwork, ideas, and rewards for high performance, please read on! This role requires a candidate who is fluent in software engineering concepts, highly proficient in Atlassian JIRA, and capable of bridging the gap between technical teams and business stakeholders—particularly within the apparel decoration and manufacturing space. What You’ll Be Doing: • Oversee the implementation of Decoration ERP System, FDM4, under the direction of the Business Systems Manager., • Lead end-to-end IT projects following Agile SDLC frameworks (Scrum, Kanban, or hybrid models), • Manage project backlogs, sprints, and workflows within Atlassian JIRA, ensuring accurate tracking and reporting, • Collaborate with software engineers, ERP administrators, and business stakeholders to define requirements and deliver scalable solutions, • 4+ years of experience in IT Project Management or Technical Program Management, • Solid Agile experience and some ERP exposure (e.g., NetSuite, SAP, ePS Pace, Aptean Impress, FDM4, or similar), • Can translate business use case to engineering, • Strong hands-on experience with Atlassian JIRA platform (boards, workflows, reporting, dashboards), • Deep understanding of Software Development Life Cycle (SDLC) within Agile methodologies, • Ability to communicate effectively with software developers using technical terminology (APIs, integrations, data models, etc.), • Proven ability to manage multiple concurrent projects in a fast-paced environment, • Experience in the apparel decoration, screen printing, or heat transfer manufacturing industry, • Familiarity with production workflows such as job costing, scheduling, inventory management, and order fulfillment, • Exposure to ERP-integrated eCommerce platforms (e.g., Shopify, web-to-print solutions), • Certifications such as PMP, Certified Scrum Master (CSM), or equivalent, • Competitive base salary $90k-$130k based on experience, • Comprehensive benefits package, • Generous PTO and holiday schedule, • Professional development and industry conference attendance, • Growth opportunities in a fast-moving, innovative company #hc239417

Job Description We are looking for a skilled Technical Project Manager to lead product development initiatives from initial concept through launch. This role serves as the central connector between engineering, design, and business teams—ensuring clarity, alignment, and smooth execution throughout the full development cycle. Responsibilities • Define what the product must deliver and ensure requirements are clearly communicated across technical and non-technical teams., • Guide projects from early concept through final launch, ensuring products meet quality, performance, and timing expectations., • Translate complex technical challenges into clear direction for cross-functional partners while supporting select hands-on technical activities when needed., • Develop and maintain detailed project schedules, ensuring milestones stay on track with internal goals and retailer timelines., • Facilitate strong communication and alignment across global teams, providing ongoing visibility into project status, risks, and decision points., • Prepare and deliver project updates to senior stakeholders, including recommendations, trade-offs, and key risks., • Collaborate with engineering and project teams to ensure solutions meet both technical feasibility and business needs., • 3+ years of experience in project management or engineering, ideally within consumer products, plastics, or hardware development., • Proven success managing full product lifecycles—from concept through production and launch., • Strong technical foundation with an understanding of engineering principles, manufacturing processes, and product constraints., • Ability to clearly communicate complex technical information to diverse stakeholders., • Proficiency in Microsoft Office; familiarity with CAD tools such as SolidWorks or CREO is a plus., • Experience presenting to senior leadership; exposure to executive-level communication is beneficial., • A proactive, hands-on approach with the ability to adapt quickly and work collaboratively across teams.Salary Range (commensurate with experience)$130,000—$135,000 USD

If you are reliable with a record of strong attendance, a willingness to learn, and a positive attitude, you will be a great fit for our team! In this role, you will be responsible for direct labor production tasks related to building new homes in our warehouse style manufacturing facilities. Experi

M - - Responsibilities: Collaborate with a work center team to meet production goals and objectives; Maintain high quality standards as determined through quality specifications; Ensure you own safety and the safety of others by following all Safety rules and policies; Support production processes

Aerotek - - Responsibilities: Assemble parts and components according to work instructions and specifications; Follow written and verbal instructions to complete assigned tasks; Inspect finished products to ensure quality and accuracy; Maintain a clean, organized, and safe work area; Perform repeti

Aerotek - - Responsibilities: Assemble assemblies by following written work instructions and diagrams; Use hand tools to complete assembly tasks; Perform visual inspections to ensure product quality and accuracy; Package, label, and prepare finished products for the next stage of production; Mainta

Aerotek - - Responsibilities: Assemble, position, align, and level machinery and sub-assemblies, integrating components to ensure proper functionality; Perform precision fitting, aligning, timing, and calibration of mechanical systems; Read and follow detailed work instructions, procedures, and bui

Nesco Resource - - Responsibilities: Operate production machinery to keep lines running accurately and efficiently; Perform inspections to ensure product quality and complete documentation; Make minor adjustments or repairs to machinery as needed; Replenish raw material supplies and remove finished

This role involves operating and maintaining processing equipment while ensuring compliance with safety and manufacturing standards.

These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. Perform data entry into the manu

Looking for a hands-on production role where you can build real manufacturing experience and grow into a long-term opportunity? We're hiring Production Operators for a leading food manufacturing facility in Macedon, NY. Manufacturing or production experience preferred. Production Operator - 2nd Shif

Dynamic Productions USA is an industry leading entertainment production company specializing in live events, experiential activations, brand installations, and large-scale productions. The position reports to The Director of Production. The Project Manager will assist the account management staff to

Looking for a steady manufacturing job with weekly pay, paid training, and long-term opportunity? We're hiring Machine Operator Assistants for a leading food manufacturing facility in Macedon, NY. Comfortable working in a loud manufacturing environment. Stable, consistent manufacturing work.

Where state and federal laws/regulations allow, accountable for performing day-to-day non-clinical pharmacy operations, administrative activities; Ensures efficient pharmacy workflow and a positive patient experience.Serves as a full-time certified pharmacy technician.Responsible for operating pharm

Looking for an overnight production role with strong pay and long-term opportunity? We're hiring Production Operators for a leading food manufacturing facility in Macedon, NY. Manufacturing or production experience preferred. Production Operator - 3rd Shift | Food Manufacturing | $21.

Retail Warehouse & Production Associate.

Where state and federal laws/regulations allow, accountable for performing day-to-day non-clinical pharmacy operations, administrative activities; Ensures efficient pharmacy workflow and a positive patient experience.Serves as a full-time certified pharmacy technician.Responsible for operating pharm

Pharmacy Operations Manager - Full Time Day Shift.Join Our Team at New Bridge Medical Center!.We are dedicated to providing high-quality, compassionate care to our diverse community.As a leading healthcare provider, we offer a supportive and inclusive work environment.If you're passionate about maki

Join the Center for Translational Neuromedicine, a nationally recognized translational research center supporting NIH-funded and multi-site research initiatives.This role is ideal for a business-minded professional with experience in research operations, grant management, or clinical trials administ

Active Listening, Asset Care Management, Attention to Detail, Batch Records, Basic Troubleshooting, CMMS, Documentation & Record Keeping, Environmental & Safety Testing, Equipment Operation, FDA Regulations, GMP Compliance, Instruction Following, ISO Standards, Manufacturing, Preventive Maintenance,

Applicants must have a high school diploma (or General Equivalent Degree) or higher level of education and at least 1 year experience in operating manufacturing equipment.

Exposure to the production facility includes loud noise, fumes, and moving equipment. Chromalloy New York, a leader in repair and coating of gas turbine components for the aerospace industry and heavy industrial turbines, is currently seeking Production Workers for 2nd shift. As a Production Worker,

Production Worker Opportunities - Orangeburg, NY. Adecco is partnering with a well-established production facility in Orangeburg, NY, and is currently hiring for multiple roles, including.

Chromalloy New York, a leader in the repair and coating of gas turbine components for the aerospace industry and heavy industrial turbines, is currently seeking Production Workers for 1st Shift. As a Production Worker, you will need to be able to work in a fast paced, high-speed environment, follow