Mechanical engineering technology jobs in New York, New York - Page 3Create job alerts

Job Description Energy Engineer – Job Description USL Technology Consulting Inc. – New York, NY Position Overview USL Technology Consulting Inc. (USLT) is seeking a highly skilled Energy Engineer with extensive experience in NYC Local Law 87, including ASHRAE Level II audits, ECM analysis and calculations, interactive effects modeling, RSMeans cost estimating, retro‐commissioning (RCx), and RCM/OM&M measures. The ideal candidate brings strong technical depth in DesignBuilder/EnergyPlus, One Click LCA, and NYC energy and sustainability frameworks (LEED v4/v4.1, LL87, LL97, NYCECC, NYStretch). Key Responsibilities • Energy Modeling & Analysis, • Develop and document whole‐building energy models using DesignBuilder (EnergyPlus)., • Perform ASHRAE 90.1 Appendix G baseline vs. proposed modeling., • Conduct parametric runs, sensitivity analyses, and system‐level performance evaluations., • NYC Local Law 87 – Deep Technical Work, • Lead ASHRAE Level II energy audits, including field verification, system assessments, and data collection., • Perform ECM analysis, including savings calculations, interactive effects, and system‐level impacts., • Prepare RSMeans‐based cost estimates for ECMs, including implementation, maintenance, and lifecycle costs., • Develop ECM packages, including SIR, NPV, and payback calculations., • Support and document retro‐commissioning (RCx) measures, functional testing, and deficiency tracking., • Identify and document RCM (Resource Conservation Measures) and OM&M measures aligned with LL87 requirements., • Prepare full LL87 audit reports, including narratives, tables, and compliance documentation., • Life Cycle Assessment (LCA), • Build and manage whole‐building LCA models using One Click LCA., • Coordinate with architecture, structural, and BIM teams to integrate material quantities and EPDs., • Support LEED MRc1 documentation and embodied‐carbon reduction strategies., • NYC Local Law 97 & Code Compliance, • Support LL97 emissions modeling and compliance pathways., • Review envelope, HVAC, and lighting systems for NYCECC and NYStretch compliance., • Sustainability & LEED Support, • Provide technical inputs for LEED EA credits (EAp2, EAc1, EAc2, EAc5, EAc6)., • Support MRc1 LCA documentation and coordination., • Collaborate with multidisciplinary teams to ensure alignment with LEED v4/v4.1 requirements., • Design Coordination & Technical Review, • Review drawings, specifications, and submittals for energy‐related impacts., • Identify opportunities for energy efficiency and system optimization., • Participate in design coordination meetings and provide technical recommendations., • Field & Construction Support, • Conduct site visits to verify installed conditions and equipment performance., • Support measurement & verification (M&V) planning and data analysis. Required Qualifications • Bachelor’s degree in Mechanical Engineering, Energy Engineering, Building Science, or related field., • Extensive experience with NYC Local Law 87, including:, • ASHRAE Level II audits, • ECM analysis and calculations, • Interactive effects modeling, • RSMeans cost estimating, • Retro‐commissioning (RCx), • RCM and OM&M measures, • Proficiency with DesignBuilder (EnergyPlus)., • Experience with One Click LCA for whole‐building LCA modeling., • Strong understanding of ASHRAE 90.1, NYCECC, NYStretch, and NYC Local Laws., • Ability to interpret drawings, specifications, and technical reports., • Excellent written communication and documentation skills. Preferred Qualifications • LEED AP BD+C, LEED Green Associate, or ability to obtain within 6 months., • Experience with LL97 emissions modeling., • Familiarity with Revit, BIM workflows, and energy‐related plug‐ins., • Experience with commissioning (Cx) or retro‐commissioning (RCx)., • Knowledge of building controls, BAS systems, and M&V protocols. Soft Skills & Attributes • Strong analytical and problem‐solving skills., • Ability to work independently and manage multiple deadlines., • Clear communicator with a detail‐oriented, documentation‐driven mindset., • Comfortable coordinating with multidisciplinary teams and clients.

Job Description About Coresite: At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Engineer Role: As a member of the company’s Engineering team, the Data Center Design & Performance Engineer is responsible for designing and reviewing electrical, mechanical, and site plans. This role requires making independent decisions and consistently exercising sound judgment to ensure alignment with CoreSite’s design standards. A strong understanding of electrical and mechanical systems, particularly in relation to data center redundancy and operations, is essential. The Engineer will collaborate closely with facility and operations teams to ensure all equipment installations are thoroughly reviewed and meet CoreSite's build standards. Duties: • Evaluate the efficiency, reliability, and engineering design of electrical, mechanical, plumbing, fire and life-safety, and building management systems for expansion and upgrade projects, • Define the scope for testing and commissioning to ensure design intent and operability of systems supporting the data centers, • Provide final quality assurance sign-off for engineered systems at the end of construction, • Collaborate with Sales Engineering to design custom engineering solutions for customer deployments, • Support the sales process for complex opportunities by providing technical expertise, • Assess installed systems to optimize efficiency and reliability, • Review and approve engineering modifications to existing facilities, • Provide engineering support to Data Center Operations, including failure analysis and system maintenance of critical infrastructure, • Ensure quality control for Operations teams, focusing on equipment, safety, and maintenance best practices, • Support commissioning activities by reviewing test scripts and witnessing test performance, • Maintain up-to-date documentation related to design, procurement, and operational standards, • Special projects as assigned Knowledge, Skills, & Abilities: • Ability to work 40% on-site from an approved CoreSite Market and 60% remotely from that same market, with flexibility to adjust onsite expectations as business needs evolve, • Ability to travel up to 40% of the time to support testing and construction activities, with flexibility to adjust travel commitments as business needs evolve. Must demonstrate adaptability in managing travel requirements in response to company growth, • In-depth working knowledge of data center design, operations, and infrastructure, • Strong strategic problem-solving abilities with a proactive approach to challenges, • Proficiency in AutoCAD, or other computer aided design software, as well as in Microsoft Office, primarily Excel, • Ability to operate and interpret results from test equipment, such as power quality meters, thermal imaging cameras, multi-meters, to evaluate and troubleshoot equipment operation and performance, • Commitment to personal development and the ability to pursue relevant certifications and accreditations (i.e. LEED AP, CDCDP, etc.), • Excellent written and verbal communication and problem-solving skills, with the ability to collaborate effectively with diverse personalities and cross-functional teams in both on-site and remote environments, • Bachelor’s degree in Engineering or a related field preferred; equivalent work experience, preferably within the data center, telecommunications, or real estate industry, considered in lieu of educational qualifications. The physical demands described here are representative of those that must be met by an employee to successfully perform the job’s essential functions. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the job’s duties, the employee is occasionally required to stand; walk, sit, use hands to handle or feel objects, reach with hands and arms, climb stairs, balance, stoop or kneel, talk, and hear. The employee must occasionally lift and/or move up to 25 pounds. Ability to travel is required. Compensation: Compensation for this role includes a base salary between $110,000 to $135,000 annually. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Posting Timeline: This position is expected to be posted through April 15, 2026. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for Cigna, • Healthcare and dependent care flexible spending account (FSA) plans, • Health saving account (HSA) plans for employees participating in the High Deductible Health Plan, • Life, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount, • 16 days of paid time off (PTO)11 paid company holidays and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend., • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care., • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: The Outside Sales Associate supports business development efforts by engaging new and existing customers, estimating projects, interpreting bid documents, and preparing proposals for building automation and mechanical solutions. This role builds relationships within the territory, collaborates closely with sales leadership, and develops technical and sales expertise through hands-on training and field experience. Responsibilities: • Interface with new and existing clients, • Define project requirements, estimate projects, build relationships, gather leads from established business partners, set appointments and recommend optimal Bosch Building solutions, • Interpret bid drawings and requirements, estimate project costs and write proposals, • .Work both independently and cooperatively within your designated area to close sales, secure business, and meet sales targets, • Develop skills required to understand sales strategy focused on decision-makers and business owners to establish a network and gain new business and expand relationships, • Collaborate daily with manager and team counterparts, • Participate in ongoing training, development, and mentoring, • Other duties as assigned. Required Qualifications: • Understanding of HVAC / controls / mechanical systems., • A positive Self-Starter attitude, • Good communication and people skills, • An ability to overcome obstacles and find solutions, • A commitment to ongoing learning to build upon past methods is essential Preferred Qualifications: • While an engineering degree is not essential, understanding of mechanical and/or BMS systems is preferred, and/or military experience, • 1-2 years of previous work experience or internships in Retail, Marketing, Business Development, Engineering, Technical Sales, or comparable fields are also preferred Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sites, • The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Will be required to be on site with customers or contractors, with or without BBT colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction., • Driving to customer sites is required, • Limited overnight travel may be required Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at You'll Do The Data Center Planning & Construction team at CoreWeave is responsible for delivering a rapidly growing portfolio of data centers and critical infrastructure projects that power our AI cloud platform. We own the full project lifecycle—from site due diligence and design through construction, commissioning, and turnover—while partnering closely with Finance, Operations, and Executive Leadership to scale our footprint responsibly. The Construction Cost Engineer will be the owner-side commercial lead across a portfolio of complex, large-scale developments, with a focus on data centers and mission-critical infrastructure. You will build and maintain the financial "source of truth" for your projects, ensuring clarity, accountability, and control over every dollar from pre-construction through closeout. About the role: As a Construction Cost Engineer, you are responsible for the financial integrity of CoreWeave's physical build-outs. You will manage capital expenditure (CAPEX) for large-scale data center projects, ensuring our ambitious AI infrastructure deployment timelines are met without budget overruns. You will act as the "financial conscience" for our Project Managers and General Contractors. In this role, you will: • Own portfolio-level cost planning, control, and forecasting across multiple concurrent projects., • Serve as a strategic advisor to Construction, Real Estate, and Finance leadership on budget, risk, and commercial strategy., • Implement scalable tools, processes, and reporting that support CoreWeave's rapid growth and evolving data center program., • Partner with internal and external teams to anticipate risk, drive value, and protect the company's capital while enabling speed.=Who You Are:, • Cost Planning, Budgeting & Forecasting, • Develop and manage project and program-level budgets, cost plans, and capital forecasts for data center and infrastructure projects., • Build and maintain cost models and benchmarks across markets, asset types, and delivery models., • Own Anticipated Final Cost (AFC) and Estimate at Completion (EAC) forecasting; identify variances and risks early with clear mitigation plans., • Cost Control & Financial Management, • Lead end-to-end cost control for multiple projects, including tracking commitments, accruals, and actuals., • Monitor WIP, invoices, payment applications, and change events to ensure accuracy, compliance, and timeliness., • Prepare and present monthly cost reports and dashboards covering budget, forecast, exposure, contingency, and cash flow., • Implement and refine cost control systems, standards, and KPIs that can scale across the portfolio., • Change Management & Risk Analysis, • Review and validate, and negotiate change orders, claims, and potential change events from GCs, subs, and vendors., • Maintain contingency, exposure, and escalation tracking, including log management and drawdown strategy., • Partner with Construction, Design, and Operations to identify cost risks, model impacts, and recommend mitigation paths., • Lead or support post-mortem cost analyses, lessons learned, and audits to continuously improve cost performance., • Vendor & Consultant Management, • Manage and direct third-party QS/cost consultants and other commercial partners; ensure deliverables are on time, accurate, and actionable., • Review estimates, reconciliations, value engineering proposals, and cost reports for quality and alignment with CoreWeave standards., • Hold vendors accountable for scope, budget, and reporting expectations, and escalate issues as needed., • Data, Reporting & Continuous Improvement, • Build and maintain cost databases, historical benchmarks, and market intel to inform future projects and negotiations., • Analyze trends to identify value-engineering and cost-optimization opportunities without compromising performance or reliability., • Develop standardized tools, templates, and dashboards (e.g., for AFC, exposure, contingency, cash flow) to drive consistency., • Contribute to playbooks and best practices for project controls across the Construction & Data Center Planning organization., • 5+ years in or data center project controls., • Advanced MEP (Mechanical, Electrical, Plumbing) Estimating: Specific expertise in pricing high-density power systems and specialized cooling., • Ability to develop life-cycle cost models that include GPU depreciation, power usage effectiveness (PUE), and carbon offset costs., • Proficiency in using historical data to create "Cost per Megawatt" or "Cost per Rack" benchmarks specifically for AI workloads., • Expertise in validating "AI-driven design changes"—such as mid-project increases in floor loading for heavier GPU clusters or power-train upgrades., • Proficiency as a power user of construction management platforms (Procore, Autodesk Build, or e-Builder)., • Advanced proficiency in Microsoft Excel (including VBA/Power Query) required for synthesizing and analyzing large-scale vendor spreadsheets., • Quantity Surveying Expertise: The ability to perform quantity take-offs from construction drawings to accurately verify vendor quotes., • High-Velocity Performance: Ability to consistently process critical approvals and perform cost analyses with the speed required by CoreWeave's high-velocity operating schedule., • Effective Communication and Presentation Skills: Ability to translate complex cost data into clear, concise narratives and recommendations for diverse audiences., • Proven ability to influence and align cross-functional teams and senior stakeholders using data-driven insights, sound judgment, and structured thinking., • Deep knowledge of:, • Core construction cost drivers, including MEP systems, structure, envelope, and siteworks., • Estimating tools and workflows (e.g., CostX, Bluebeam, On-Screen Takeoff, Excel-based models)., • Project controls best practices, including change management, contingencies, escalation, and exposure tracking.Preferred:, • Professional certifications such as RICS, CCP, FRICS, PMP, or equivalent., • Familiarity with project management and collaboration tools (e.g., Primavera P6, MS Project, Procore, NetSuite, or similar)., • Experience building or contributing to cost databases, benchmarking frameworks, or standardized reporting suites., • You treat every dollar like it's your own, but you also know when speed and opportunity outweigh marginal savings., • You're curious about how things are built, not just what they cost, and you enjoy being close to the work in the field., • You're energized by building structure, tools, and standards that others rely on., • You love taking ownership of complex financial integrity and serving as the "financial conscience" for large construction projects., • You're curious about continuously analyzing data to find new cost efficiencies and develop better project benchmarks., • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $134,000 to $179,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Essential Job Functions: General: · Comprehend plans and specifications to perform accurate take offs · Analyze blueprints and specifications to help estimating department determine labor and material costs · Review proposal specifications and drawings to determine work scope with estimators · Consult with internal stakeholders and team · Solicit subcontractor and vendor requests for pricing for the estimating department · Receive and incorporate revisions and addendums into project documents · Attend internal scope review meetings · Participate in meeting for project handover to field personnel · Upload Proposal Letters for estimating department within Company systems · Enter Job Information in Accubid, Building Connected and Estimating Folder · Input estimators notes into Sales Card Cash Flow Analysis · Assemble Job Folders for bid documents for estimating and operations Requirements: General: · Strong analytical skills · Exceptional organizational skills and attention to detail · Proficient in Microsoft Office (Outlook, Word & Excel) · Competency in understanding and explaining take-off sheets for estimating · Excellent customer orientation and service skills · Strong written and oral communication skills · A team player that works effectively with internal stakeholders. Essential Physical Abilities · Able to navigate NJ office buildings and construction sites · Access typical office equipment, access file cabinets · Ability to locate and report to various remote projects sites Education/Experience Required: · 1 year experience in estimating · Proficiency in the use of computers, Microsoft Office Suite, Portable Document Formats (PDF) software, project management software. · Undergradute in Science, Engineering or Engineering Technology ABET curriculum Working Environment · Construction Rooms · Normal Office Environment · Frequently communicates with employees and customers verbally and in writing · Ability to work during weekdays M-F (8am-5pm) Company DescriptionAbout Unity Electric LLC.: Unity Electric, a full service IBEW electrical contractor, is dedicated to providing integrated, comprehensive service to its clients, including design, installation and maintenance of complex electrical, telecommunications, life safety, security systems, audio-visual, mechanical systems, and Information Technology projects and staffing. Unity is headquartered in New York, with offices in New Jersey, as well as operations throughout the U.S. About Equans: Equans, a Bouygues group company, is the world leader in multi-technical services with offices in 20 country hubs. We design and provide customized solutions to improve our customers’ buildings, technical equipment, systems and processes and to support them in optimizing their use. With nearly 90,000 highly qualified employees and a strong geographic footprint through our historical local brands, we have excellent technical know-how in design, installation, maintenance and performance services, with a unique combination of skills as in HVAC, Cooling & Fire protection, Facility Management, Digital & ICT, Electrical, Mechanical & Robotics. Equans expertise and knowledge of our customers’ businesses now place us to support them in their transitions for modernization and sustainable development.About Unity Electric LLC.:\r\nUnity Electric, a full service IBEW electrical contractor, is dedicated to providing integrated, comprehensive service to its clients, including design, installation and maintenance of complex electrical, telecommunications, life safety, security systems, audio-visual, mechanical systems, and Information Technology projects and staffing. Unity is headquartered in New York, with offices in New Jersey, as well as operations throughout the U.S. \r\n \r\nAbout Equans:\r\nEquans, a Bouygues group company, is the world leader in multi-technical services with offices in 20 country hubs. We design and provide customized solutions to improve our customers’ buildings, technical equipment, systems and processes and to support them in optimizing their use. With nearly 90,000 highly qualified employees and a strong geographic footprint through our historical local brands, we have excellent technical know-how in design, installation, maintenance and performance services, with a unique combination of skills as in HVAC, Cooling & Fire protection, Facility Management, Digital & ICT, Electrical, Mechanical & Robotics. Equans expertise and knowledge of our customers’ businesses now place us to support them in their transitions for modernization and sustainable development.

Job Description Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical buildings and the systems that bring them to life. We are seeking a Supervising Mechanical Engineer - CF to join our team in New York office. As a Supervising Engineer, you will be responsible for representing the Firm in all interactions with clients, contractors, architects, and other project team members. You will be responsible for supervising, coordinating, and assigning various projects to be performed by the team. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Mission Critical, Science + Technology, Healthcare, and Project Management experience a plus. Job Responsibilities As a Supervising Mechanical Engineer,- CF you will be the Engineer of Record on dedicated projects and be responsible for supervising and leading coordination meetings. You will lead and supervise staff members as they perform their tasks, and participate in budgeting, scheduling, and staff management. Additional responsibilities include: • Providing periodic objective and comprehensive employee evaluations., • Acting as "Engineer of Record" on dedicated projects., • Assisting Technical Manager and Chief Engineer in business unit technical training and staff mentoring., • Coordinating and assigning various projects to be performed by the engineering team (i.e., system design and project engineering)., • Establishing design standards, specifications, and criteria for projects., • Leading and supervising staff members as they perform their tasks., • Managing Construction Administrative duties, such as field reports, responses to RFIs, processing Bulletins and Addenda, etc. (PM)., • Coordinating with accounting to prepare monthly project invoices. Monitoring project accounts receivable and contacting the client as needed to expedite payment., • Monitoring all correspondence between staff, clients, contractors, Owners, etc., • Participating in and contributing to the firmwide Expert Teams committee., • Participating in budgeting, scheduling, and staff management., • Preparing proposals and administering project contracts between Syska Hennessy Group and the client, including add service agreements., • Supervising and leading coordination meetings. Successful candidates must have a current PE registration and must have Healthcare design experience. In addition, a history of working with projects such as Critical Facilities, Commercial, and Aviation would be a good fit for this dynamic role. • Bachelor's degree in Mechanical engineering from an Accredited Institution, • 12+ years' experience working in a consulting firm, this is a Senior level role that requires a background in the MEP Engineering Industry, • 3 years of supervisory experience, • Hands-on design and CAD/REVIT experience, required, as you will have a very strong technical role, • PE licensure a requirement As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend Syska Hennessy Group - Creating Exceptional Environments The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range$120,150—$170,226 USD

Job Description Controls Engineer - Data Centers - NYC or Remote Our client is a Leading Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the execution of design of Controls and Building automation systems platforms such as EPMS (Electrical and Power Monitoring Systems), BAS Systems (Building Automation Systems), BMS System (Building Monitor Systems), DCIM, SCADA in a data center or industrial environment. This candidate will design customized controls solutions for customers in the data center industry for both new design and upgrades to existing automation systems for power and cooling systems in a live, mission-critical environment. They will collaborate with the Electrical and Mechanical Engineering / Design teams to ensure the reliability, proper operations, acceptance of new and modified installations, automations and software solutions. Applies an intensive and diversified knowledge of experience in machine control / BMS/BAS/EPMS/DCIM/SCADA systems design, implementation, testing and operations. Responsibilities: • Execute automation design of complex scope, and coordinate activities of other personnel as needed, • Meet with business to understand needs of the customer to design a customized solution to meet their needs, • Equipment selection and write supporting reports, • Create standards for ground up design as found in initial discovery process, • Lead design for control panels: layout, control power, relay logic, and wiring diagrams, • Create and review project specifications and sequence of operations of MEP equipment, • Create Bill of materials (BOMs): instrumentation, sensors, actuators, valves and other field devices, • Mentor engineers and assist with training and development on software standards to create a learning and growing environment, • Design and implement Front end SCADA (Supervisory Control and Data Acquisition) Platforms, DDC and PLC - controller based systems for various projects, • Lead the design of BAS controls and EPMS, • Develop and improve design configuration, programming, networking, systems architecture, diagnostic standards including IT / OT requirements and interface to match application needs, • Review / Submit project deliverables per project requirements: AE design drawings, shop drawings, product data, o/m manuals (SOPs and MOPs), etc., • Lead development of UI / UX configuration standards, • Develop proposals and timely completion of Assigned Tasks and Deliverables including project scope, schedule and budget, • Effective time management of project design team including forecasting resources and resource coordination, • Identify potential project scope changes; aid in development of strategies to minimize impact and changes from estimated costs and project deadlines, • QA/QC peer reviews for projects which candidate is not the engineer, • Optimize workflow and deliverables by developing templates, standards, automations, etc., • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs and commissioning agents on project progress, • Assist / Develop all project communication and reporting, weekly progress reports, etc., • BA / BS in Mechanical or Electrical Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Engineering experience with industry standards with Automation and Controls Experience relevant to the data center industry, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 4-7+ years with BMS / BCM / BAS Systems / SCADA / DCIM - Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (air-cooled / water cooled chillers, cooling distribution units, cooling towers, adiabatic coolers, Air Handlers, CRAC / CRAH units, liquid cooling systems, containment solutions, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings, equipment submittals, and facility layouts, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications Please apply directly by clicking the link below, alternatively you can forward your resume directly to: After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. POSITION PURPOSE This position will be responsible for providing inspection and technical program support for equipment inspection, test, and repair portions of the overall Mechanical Integrity/Quality Assurance effort. The role will primarily focus on the Red Lion (Delaware City, DE) and Morses Mill (Linden, NJ) facilities while also being integrated and part of the Nexpera Technology Center, which provides support to all Nexpera sites. The role will reside at Red Lion (Delaware City, DE) PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Develop/Authorize/Maintain and implement standardized inspection plans for all PSM Critical Equipment, including pressure vessels, process vessels, heat exchangers, piping, storage tanks, and other equipment., • Perform equipment inspection in accordance with API 510, API653and API 570 guidelines and regulations., • Complete post inspection reports and provide recommendations and/or modifications for immediate concerns and future consideration., • Develop, implement and document repair plans for fixed equipment, • Perform field contract administration duties during field repairs of equipment, • Standardize, organize, and maintain required documentation (design bases, inspection plans, inspection reports, etc.) in accordance with corporate and site MIQA best practices., • Update SAP and equipment files with equipment history, Inspection Plans., • Ensure that all inspections and tests are performed in accordance with the original equipment design basis and in alignment with recognized and accepted good engineering practice (RAGAGEP)., • Ensure that all repairs to fixed PSM Critical Equipment is documented in accordance with OSHA 1970.119, • Evaluate the fitness-for-service of all fixed PSM Critical Equipment and assist other Technical/Maintenance resources in properly developing and documenting any repairs to return the equipment service., • Perform necessary calculations required within the RAGAGEP to determine the minimum allowable thickness of pressure vessels, piping, and tanks in PSM Critical service., • Provide functional guidance to Veolia and contract NDE Examiners, • Evaluate results of various non-destructive inspections on process equipment and provide recommendations based on those inspection results, • Act as an Authorized Inspector for PSM Critical pressure vessel, piping, and storage tank inspections and tests, as well as for approval of all alterations to PSM Critical pressure vessels, piping, and storage tanks., • Manage & Implement the Corrosion Monitoring program PSAIM® for the sites, • Coordinate contract NDE inspections and perform Field Contract Administrator responsibilities, • Develop Quality Assurance Plans for fabrication of new equipment (ex. tanks, pressure vessels, piping, etc.), • Perform/coordinate QA inspections of new equipment on site and at shop locations., • Estimate equipment remaining life per the applicable RAGAGEP., • Maintaining the site Owners User Manual as applicable. Qualifications In order to be qualified for this role, the following is required: • 3 plus years work experience within high hazardous chemical processing or oil refining industries or similar industries, • At least 2 out of 3 of the following certifications: API 510, API 570, API 653, • Able to travel ~40% per year, • Working knowledge of Process Safety Management (PSM), • Ability to obtain any missing API certification (API 510, API 570, API 653) within 2 years of employment, • Comprehensive working knowledge of API 510, 570, 653, 579, 580, ASME B31.1, B31.3, Section V, VIII, IX, NBIC, NACE SP0294 requirements governing inspection & tests, fitness for service, and repair of process piping, pressure vessels, and tanks, • Ability to develop and implement inspection plans for piping, pressure vessels, and storage tanks., • Ability to develop, implement, and analyze repair procedures for fixed equipment., • Thorough knowledge of non-destructive examination techniques, including UT, VT, RVT, RT, MT, Eddy Current, IRIS, Shear Wave, etc. Level II certifications a plus, • Knowledge of welding practices and procedures, • Ability to perform confined space entry, • Excellent interpersonal skills, coupled with superior oral and written communication skills, enabling ability to influence all levels of personnel., • Demonstrated proficiency with MS Office, • Prioritization and organizing capabilities, • Disciplined in functioning in a self-directed work environment, • Be extremely detail oriented with excellent written and communication skills, • Current and valid driver’s license, • Currently have or able to obtain a Transportation Worker Identification Card (TWIC) Physical Requirements/Work Environment • Willing and able to work in a High Hazard environment; outdoors, indoors, elevated heights and confined spaces, • Willing and able to wear required PPE (personal protective equipment) such as steel toes, hardhat, protective eyewear, sir supplies and cartridge respirator, etc., • Willing and able to climb stairs, ladders, stand, walk, stoop, bend, kneel, crawl, visual acuity for close work, able to reach overhead, able to hear and respond to alarms., • Successful candidates must be able to perform the essential functions of the job with or without accommodation. BENEFITS NEXPERA's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Zerocater is looking for an ambitious sales leader with experience selling corporate catering and cafeteria solutions to some of the largest companies in North America. As the Head of Cafeteria and Catering Sales you will own winning new 6, 7, and 8 figure logos by evangelizing the value of our onsite cooking, off-premise catering, snacks, and coffee products. Reporting directly to our CEO, this role is responsible for all new revenue growth at Zerocater. We're looking for a scrappy leader who is comfortable being in a player/coach role (i.e. hunting and running the sales cycle for our largest deals) while also having the insight and experience needed to scale our hunter field sales team. We are looking for a high-performing leader who isn't afraid to get their hands dirty and build the right processes, playbooks, enablement, and systems needed to scale our sales team nationally. The ideal candidate has a proven track record of hiring and developing high performing sales talent, has consistently over delivered on new revenue goals, and has the resiliency needed to thrive in high-growth environments. What you will do: • Serve as a trusted leader within our company who lives our mission, vision who will build our sales strategy and plan in partnership with finance; exceed all hiring, new revenue, and cost of new revenue targets., • Be a strong coach and mentor to our existing sales teams to build a culture of excellence that increases sales productivity., • Act as a player coach by hunting and winning new enterprise corporate catering and cafeteria customers nationally., • Hire, coach, and develop high-performing sales talent. Create strong enablement and training programs that enable every rep to exceed our productivity goals., • Develop a winning sales playbook. Coach and mentor your team to hunt and large strategic corporate catering and cafeteria accounts ($1M-$30M in ARR)., • Build the operational rigor needed to scale our sales team; increase productivity and lower cost of revenue through territory carving, account segmentation, quota setting, and compensation planning. Own all sales forecasting, reporting, and analytics., • 15+ years of B2B sales experience with 8+ years experience in leadership roles where they owned and scaled the entire sales function., • Has experience selling corporate catering and cafeteria solutions to large companies while also working in high growth environments preferably at a mid-stage B2B startup., • Demonstrated success hiring top-tier talent; a strong coach and mentor to ICs, front line, and second line managers. Has managed tenured sales reps selling to enterprise accounts., • Strong analytical mindset with deep understanding of go-to-market (GTM) strategy, metrics, and operations; experience in account and territory segmentation, quota design, and compensation planning, • Proven track record as a motivational and agile leader who earns team trust by leading from the front—demonstrating hands-on expertise in winning deals and driving customer growth., • Started your career in field sales as an account executive and knows how to hunt and close complex deals. Has a track record of winning and growing 8+ figure accounts. Compensation: Base salary of $225k-$250k (Commission Potential of $150k+) What we offer: Not only will you have the opportunity to grow your career with other food-obsessed colleagues who have a shared passion for creating delight for customers, but you will also work alongside a highly collaborative team that values leading with trust and respect, and taking smart risks. • 401k match with immediate vesting (we match up to 3% of up to 6% that you defer), • Flexible PTO, 10 paid holidays, flexible sick time, plus 8 hours of volunteer time, • Low to no-cost comprehensive health, dental and vision coverage (Anthem Blue Cross), • Employer-paid life, short-term and long-term disability insurance, • $100 monthly wellness stipend, • $35 monthly cell phone stipend, • $35 monthly internet stipend, • Commuter benefits: Pre-tax money towards parking or public transit • Michael Pollan We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need assistance or an accommodation due to a disability, please contact us at .

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are seeking a Water Infrastructure Engineer to join our team in New York, NY. This role will lead technical design and delivery for pump station and wastewater capital projects, including new facilities and rehabilitations. Candidates must hold an active Professional Engineer (PE) license and have 10–15+ years of relevant experience with pump station and wastewater system design. The ideal candidate will demonstrate strong leadership in multidisciplinary teams, deep knowledge of pumping system components and controls, and experience developing plans, specifications, and estimates for municipal clients.Typical responsibilities include: • Provide technical planning, design and construction support on various wet weather projects that may include pump station, combined sewer overflow, collection system, water, stormwater, hydrologic and hydraulic models, and/or other water/wastewater projects, • Serve as Design Lead/Deputy PM on pump station capital projects., • Support mentoring, standards, and QA/QC across pumping systems work., • Prepare engineering calculations and supporting analysis of alternatives, • Prepare and evaluate wet weather control alternatives, • Develop and complete applications, permits, engineering reports and specifications, • Prepare and review engineer estimates, • Prepare design cost estimates, • Conduct research and development for projects, • Monitor task budget and progress, • Prepare project status and other reports, • Communicate project details with other design engineers, • Conduct project cost reviews, • Promote sales, • Prepare and review scope, budget, and schedule for project tasks, • Assist with proposals, marketing, project reports, and technical presentations, • Conduct on-site inspections as needed, • Attend and/or conduct client and project meetings, • Attend various meetings including pre-design, plan review, pre-construction, professional organization, staff, etc., • Attend seminars and/or training classes, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's degree in Civil, Environmental or Mechanical EngineeringSkills/Experience:, • Active Professional Engineer (PE) license., • 10–15+ years of relevant experience with pump station and wastewater design (new and rehabilitation)., • Demonstrated ability to lead technical delivery and coordinate multidisciplinary design teams., • Strong knowledge of pump station components and systems (wet wells, pumps/valves/piping, odor control/ventilation as relevant, standby power, SCADA/I&C interfaces), • Experience developing plan, specification, & estimate packages and navigating reviews with municipal clients., • Experience with rehabilitation/retrofit work: constrained sites, phased construction, maintaining operations, bypass pumping concepts., • Familiarity with surge/transient analysis tools or coordination of transient evaluations., • Construction administration and commissioning/startup experience for pump stations., • Prior work with large municipal agencies and capital programs (NYC-region experience a plus)

Job Description ABOUT ORGANOX: OrganOx is a commercial stage organ technology company dedicated to developing technologies to improve outcomes for patients with acute or chronic organ failure. The company was established as a spin out of the University of Oxford in 2008 and is now part of the Terumo Group. OrganOx is a pioneer in normothermic machine perfusion (NMP). It's flagship platform, the metra®, is available for use in the U.S., Europe, Canada, and Australia. It has been utilized in over 7,000 liver transplants to date to keep donor livers in a metabolically active state outside the body enabling longer preservation times and functional assessment of the organ prior to transplant, leading to an increased number of organs available for transplant. Founded in 1921, Terumo Corporation (TSE:4543) strives to fulfill its mission of “Contributing to Society through Healthcare” by providing a comprehensive range of solutions in the fields of therapeutic procedures, hospital operations, and life sciences in more than 160 countries and regions. Position Summary The Product Quality Engineering team at OrganOx is a technical quality engineering team responsible for monitoring, understanding, and improving product performance of the OrganOx Metra, a Class III medical device. The Product Quality Engineering team works closely with Product Sustaining Engineering and Contracted Suppliers to set in place quality control and management processes for externally built products and componentry, including sterilization and microbiology, supplier management, and contract manufacturing processes. The Product Quality Engineer position will be focused on hands on complaint investigation of returned product. This position is ideal for an entry-level engineer looking to grow and develop hands on quality engineering skills. The ideal candidate will have some prior laboratory or investigation experience, and showcase an ability to analyze product quality issues and work cross-functionally to solve problems related to product quality. The successful candidate is collaborative, has excellent communication and problem-solving skills, and is passionate about delivering world-class products that make healthcare more accessible, simpler, and safer. Listed below are the major responsibilities of the role and a brief description of some of the key tasks to be performed. This list is not totally exhaustive. This is a flexible, on-site role in our Madison, NJ office. Requirements Major Responsibilities Under direction from the Senior Product Quality Engineer and Senior Manager, Product Quality Engineering, the Product Quality Engineer may be responsible for the following: • Support root-cause investigations in response to customer complaints, • Support hands-on analyses of returned products to identify root causes of failures, • Receive all returned products and perform full decontamination process in accordance with established procedures., • Gather all relevant case details including service reports, system data, and clarifying information needed to support a thorough complaint evaluation with assistance from the Product Quality Engineer, • Raise Supplier Corrective Action Reports (SCARs) in response to product performance trends. Support timely closure of SCARs., • Participate in the development and review of engineering change orders that impact product quality activities, • Perform DHR, Service History record, and PFMEA reviews in support of complaint investigations, • Adhere to the letter and spirit of OrganOx’s Code of Conduct and all other company policies. Skills & Experience • Familiarity with quality engineering principals such as complaint investigation, SCARS and CAPAs, • Experience in handling laboratory materials and conducting hands on lab investigations is a plus, • Excellent oral and written communication skills with the ability to communicate with audiences of varying technical skills, • Strong organizational skills with the ability to manage multiple tasks simultaneously, • A strong ability to prepare written technical plans and reports documenting failure investigations, • Proven ability to work cross functional and within global teams, fostering a culture of high collaboration, • Ability to be self-driven and solve complex problems independently. Committed to upholding OrganOx values in daily work and decision-making, • Experience in driving a global quality mindset across teams and geographies, • Demonstrated strong attention to detail and “do it right the first time” attitude Qualifications • Excellent technical report writing skills are required, • Strong experience with MS Office Products (Word, Excel, Visio, Project, PowerPoint, Outlook, etc.) is required, • Prior experience performing complaint investigations preferred, • Ability to travel 10-20% (domestically and internationally) A job description does not imply that the duties stated are the only ones to be performed by the job holder. Job holder will be required to follow any other job-related instruction as reasonably requested by their line manager or their designate. Benefits At OrganOx, We offer competitive compensation and comprehensive benefits available from day one, including health, dental, vision, disability coverage, and flexible spending accounts. Additionally, we offer a 401(k)-retirement plan with company matching after 90 days, paid time off, holidays, and additional leave benefits, as well as employee discounts and access to our onsite wellness facility. OrganOx supports work-life balance and provides opportunities for ongoing professional development.

Job Description Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. We are looking for a Mechanical Engineer III - IV in our New York, NY office. Job Responsibilities As a Mechanical Engineer III- IV you will be responsible for creating basic designs under the direction of senior engineers and/or senior designers, performing equipment selections, and load/energy and pressure drop calculations for a variety of projects and project sizes. Individuals in this position must demonstrate the ability to progress from basic design work assignments to more complicated and involved projects working in conjunction with a technical team. Additional responsibilities include: • Represent Syska Hennessy Group and work in close contact with and effectively interact with the internal design team as well as external clients and consultants (including owners, builders, developers, program managers, architects, vendors, etc.), • Coordinate with other disciplines and work in close contact with the entire design team (architectural and engineering / internal and external), • Conduct field inspections to determine existing conditions and coordinate new work, • Assist the Senior Engineer in preparation of due diligence, feasibility, gap analysis, and other technical reports and drawings using CAD/REVIT, • Master drawing organization format and company standards, • Take ownership of completeness, accuracy, and timeliness of work assignments Successful candidates for the Mechanical Engineer role should demonstrate strong REVIT, and MEP skills from mark-ups through the production of detailed drawings, and have basic knowledge of construction documentation and design phase requirements. Someone with knowledge of trade specific design and calculation software including energy analysis software (eQuest, Trace, etc.) would be a good fit for this dynamic role. Additional requirements include: • Bachelor's Degree in Mechanical Engineering from an Accredited Institution, • Minimum of 3.5 to 8 years of relevant experience in the MEP field working with projects such as Aviation, Healthcare, Commercial, and Mission Critical., • Latest version of AutoCAD MEP and REVIT required, • Basic understanding of proper system selection, • Basic knowledge of applicable codes, • FE certification required; PE preferred. As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range$86,308—$148,882 USD

Job Description Senior Mechanical Engineer – Critical Facilities Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. We are seeking a Senior Mechanical Engineer to join our team in New York – specializing in Critical Facilities. Your experience working in a consulting firm on CF/Data Center projects will ensure your success in this role. You will contribute to the design of major projects from both engineering design across all phases from around the world. You will be part of a large team of over 100 engineers nationally with a wealth of experience, so this is a great opportunity to grow your career. Our dynamic work environment provides the optimal setting to take your career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedules and fun social events, it's everything you'll need for an exciting, challenging, and rewarding career. Job Responsibilities As a Senior Mechanical Engineer, you will be responsible for representing the Firm in all interactions with clients, contractors, architects, and other project team members. You will be responsible for creating basic designs under the direction of the more senior engineer and/or senior designer, develop specifications, system narratives and system layouts for a variety of projects and project sizes. Additional responsibilities include: • Establishing design standards, specifications, and criteria for projects, • Supervising preparation of reports and analysis of system options and building conditions, • Maintaining interdisciplinary coordination with other trades/projects consultants, • Monitoring all correspondence between staff, clients, contractors, owners, etc., • Supervising construction administrative duties such as field reports, responses to RFIs, processing bulletins and addenda, etc., • Periodic objective and comprehensive employee evaluations, • Participate in and contribute to business unit Technical Leadership Committee, • Bachelor's degree in Mechanical engineering from an Accredited Institution, • 8+ years' experience working in a consulting firm, this is a Senior level role that requires a background in the MEP Engineering Industry, • Project management skills a plus, includes managing an internal design team., • Hands-on design and CAD/REVIT experience required, as you will have a very strong technical role. As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend Syska's work schedule is 4 days - Monday to Thursday 9 hours in the office and Fridays 4 hours work from home. Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range$106,568—$149,852 USD

Job Description The Graveyard Dedicated Support Engineer is responsible for administering preventative maintenance (PM) and troubleshooting, calibrating, and performing electrical safety tests (EST) on automated equipment located in dedicated customer location. The ideal candidate is involved in all areas of the equipment technology, including monitoring work order requests, completing repairs, new equipment inspections and installations, PM’s, EST, inventory management, and documenting all service activities. The Dedidcated Field Service Engineer will be required of the follwoign KEY ACCOUNTABILITES: • Perform tasks associated with the installation, maintenance, repair, troubleshooting, and assembly of automated microbiology equipment involving basic knowledge and abilities associated with the electronics, robotics, and mechanical processes., • Achieves performance measures associated with the maintenance of equipment, productivity, customer satisfaction, and other performance standards., • Complete all necessary documentation of activities involving the servicing of equipment in accordance with the manufacturer's requirements., • Serves as a resource for the proper operation and maintenance of equipment., • Instructs instrument operators in proper equipment use., • Adheres to the highest level of customer service while managing customer requests with diplomacy., • Provides technical support to customers by telephone as required., • The desire to work in a nightshift setting ., • Must reside in or around dedicated customers., • Must be reliable and able to work independently with limited supervision., • Excellent customer service expertise with outstanding communication skills., • Comfortable working in clinical environments with infectious agents and bio-hazards., • Computer literacy and the ability to read instrument schematics required., • Associate degree in Biomedical Equipment Technology, Industrial, Electrical, or Mechanical Engineering or minimum 2-3 years equivalent formal related training required., • Must be able to have manual dexterity to operate equipment and tools required on the job., • Must occasionally lift and/or move up to 50 lbs., • Must be able to occasionally crouch, kneel, and/or duck into tight spaces of the equipment., • Travel required (Approx. 10% or less).Company DescriptionBe a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.Be a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.

Job Description About Synaptrix Labs Inc. Synaptrix is on a mission to revolutionize brain-computer interfaces through non-invasive approaches. We believe that the power to diagnose and treat neurological conditions safely, and to expand human potential, will become a reality with the right fusion of deep learning, signal processing, and computational neuroscience. We're seeking passionate, creative, and technically driven interns to join our team across multiple disciplines: Software Engineering, Hardware Engineering, Machine Learning Research, Industrial Design, and UI/UX Design. If you're excited about building the future of brain-computer interfaces and want to work at the intersection of neuroscience, AI, and human experience, we want to hear from you. Responsibilities: Depending on your background and interests, you may: • Contribute to development of real-time software systems for neural signal processing and data visualization., • Build and prototype non-invasive EEG-based BCI hardware, from electrode arrays to embedded microcontroller systems., • Design, train, and evaluate machine learning models for EEG/EMG decoding, denoising, and signal enhancement., • Develop intuitive interfaces and user experiences for individuals with mobility or communication impairments., • Collaborate with the design team to prototype wearable and ergonomic form factors for next-generation neurotech devices., • Support data collection and analysis in research sessions, assisting with experimental setup and instrumentation., • Participate in cross-functional design reviews and brainstorming sessions that bring together neuroscience, AI, and engineering., • Currently pursuing a Bachelor's or Master's degree in Computer Science, Electrical Engineering, Biomedical Engineering, Neuroscience, Mechanical/Industrial Design, or a related field., • Demonstrated experience with one or more of the following:, • Software: Python, C++, or JavaScript, • Machine Learning: PyTorch, TensorFlow, or JAX, • Hardware: Arduino, PCB design, or embedded systems, • Design: Figma, Fusion 360, SolidWorks, or similar tools, • Strong problem-solving ability and curiosity about neuroscience, AI, or human-machine interfaces., • Excellent communication and teamwork skills; thrives in a fast-paced, interdisciplinary environment., • Prior experience with EEG/EMG systems, biosignal acquisition, or data analysis., • Familiarity with deep learning for time-series or multimodal data., • Experience designing assistive devices, wearables, or medical technology., • Portfolio, GitHub, or research projects demonstrating creative technical work. At Synaptrix Labs, we celebrate curiosity, open collaboration, and scientific rigor. Our interdisciplinary team spans neuroscience, AI, and clinical research, and we are united by the belief that non-invasive BCI is the key to unlocking a new era in healthcare, accessibility, and human augmentation. As an intern, you'll work directly alongside engineers, researchers, and designers who are defining the next generation of brain-computer interfaces. You'll be encouraged to explore bold ideas, experiment freely, and take ownership of meaningful projects from day one. What We Offer: • Hands-on experience in one of the world's most exciting emerging fields: brain-computer interfaces, • Opportunity to contribute to technology that directly improves lives, • Mentorship from scientists, engineers, and founders building real neurotechnology products, • Dynamic NYC workspace blending lab, workshop, and creative studio environments, • Potential for full-time conversion after graduation

Job Description We are sharing a specialised part-time consulting opportunity for professionals experienced in materials science, materials R&D, characterization workflows, process development, reliability analysis, computational materials work, and structured scientific documentation. This role supports current and upcoming remote consulting opportunities focused on structured materials science review, R&D workflow analysis, experimental documentation, characterization report assessment, simulation review, technology transfer materials, and high-quality project execution. Selected professionals will apply their materials science expertise to review realistic research scenarios, evaluate technical requirements, prepare structured written outputs, and support accurate, evidence-based materials R&D workflow tasks. Key Responsibilities Professionals in this role may contribute to: Materials R&D & Experimental Workflow Review • Review materials science scenarios involving experimental write-ups, project proposals, research plans, process development notes, and technology transfer materials, • Evaluate R&D documentation against source materials, technical requirements, experimental constraints, and expected scientific outcomes, • Support structured review of research records, lab documentation, project memos, IP disclosures, and materials development workflows, • Review characterization scenarios involving XRD, SEM/TEM, spectroscopy, thermal analysis, reliability testing, failure analysis, and advanced materials evaluation, • Evaluate characterization reports and test outputs against documented criteria, source data, material properties, and technical requirements, • Support structured review of metals, polymers, ceramics, composites, semiconductor materials, or related materials systems, • Review computational or simulation-based workflows involving DFT, molecular dynamics, process simulations, simulation results, and model documentation, • Support structured review of materials workflows connected to tools such as VASP, Materials Studio, LabVantage, LabWare LIMS, ANSYS Fluent, STAR-CCM+, or similar systems, • Translate materials science workflows into clear, structured task documentation and review criteria Strong candidates may have: • 3+ years of experience in materials science, materials R&D, characterization, process development, computational materials science, reliability engineering, failure analysis, or related scientific roles, • Background in one or more areas such as metals, polymers, ceramics, composites, semiconductor materials, characterization, DFT, molecular dynamics, process scale-up, or advanced materials reliability, • Familiarity with tools and systems such as VASP, Materials Studio, LabVantage, LabWare LIMS, ANSYS Fluent, STAR-CCM+, microscopy platforms, spectroscopy tools, or similar research systems, • Comfort reading and preparing materials science artifacts such as experimental write-ups, characterization reports, simulation results, technology transfer memos, IP disclosures, project proposals, and research summaries, • Strong analytical thinking and written communication skills, • Master's or PhD degree in materials science, chemistry, physics, chemical engineering, mechanical engineering, electrical engineering, or a related scientific field is helpful, • Experience in Fortune 500 R&D, national labs, R1 university research groups, semiconductor materials, advanced manufacturing, chemical materials, or industrial materials development, • Familiarity with XRD, SEM/TEM, spectroscopy, thermal analysis, DFT, molecular dynamics, LIMS, process simulation, scale-up, or failure analysis workflows, • Experience preparing or reviewing characterization reports, experimental records, simulation outputs, technology transfer memos, IP disclosures, project proposals, or reliability reports, • Strong attention to detail in scientific, experimental, and documentation-heavy research environments, • Apply materials science and R&D expertise to structured remote project work, • Contribute to high-quality materials workflow review, characterization documentation, simulation assessment, and research scenario development, • Work on flexible, project-based assignments aligned with your scientific background, • Use your materials science judgment in a focused, detail-oriented research environment, • Independent contractor role, • Fully remote with flexible scheduling, • Part-time commitment depending on project availability, • Competitive rates between $60–$85 per hour depending on expertise, • Weekly payments via Stripe or Wise, • Projects may be extended, shortened, or adjusted depending on scope and performance This opportunity is available through 24-MAG LLC. We connect experienced professionals with remote consulting opportunities across technical, evaluation, and project-based workstreams. By submitting this application, you acknowledge that your information may be processed by 24-MAG LLC for recruitment and opportunity matching in accordance with our Privacy Policy: .

Job DescriptionA Commissioning Senior Project Engineer reports to a Team Leader and is responsible for the delivery and execution of our professional services tasks for equipment in mechanical, electrical, plumbing, and associated systems. Primary activities include completing office assignments, time and expense management, in-field installation validation, field observation reports and meeting notes, functional performance testing, on-site and factory witness testing, writing of reports and meeting notes, submittal reviews, and design documentation evaluation. Additional activities include executing target billable hours, managing tasks within time budgeted, leading Cx meetings, assisting the construction team with identifying/solving technical issues when they arise, and interpreting contract documents to predict scope gaps, maximize opportunities to provide value for clients, and reduce risk. Administrative activities include supporting the Team Leader in coordinating weekly staff scheduling, training/mentoring team members on proper documentation, field procedures, and equipment usage, participating in and leading sessions of the company-wide developmental safety and training programs, and supporting revenue targets and quality assurance goals by expanding relationships with existing clients. Candidate must be able to travel to and from various job sites within the assigned region. Requirements: • Completed a Bachelor’s degree in HVACR, Mechanical or Electrical Engineering, Construction Management OR an Associate’s degree in Engineering Technology OR related trade school, construction, maintenance, or engineering controls experience, • 7+ years employment in a staff or intern position related to maintenance, construction, or engineering controls OR 3+ years in the Cx industry, • 5+ years of experience managing the interconnectivity of building equipment including pumps, fans, motors, air ventilation, chillers, boilers, steam distribution, heat absorption, building automation systems, optimization techniques, electrical distribution, fire alarm, variable refrigerant flow, and waste-water systems., • Knowledge of construction drawings, specifications, bid process, and ancillary industry documents, • Aptitude to solve problems independently and in a team environment, • Effective verbal and written communication skills, • Public speaking and presentation skills, • Adaptability to varying indoor and outdoor working conditions, • Physical fitness, capability to lift at least 30 pounds, and ability to climb ladders, • Proficiency in Microsoft Office, • Preferred Qualifications:, • Trade Association involvement, • EIT, ACP, CEM, or similar certification from experience, • OSHA 30 or other safe workplace certifications, • Familiarity with building information modelingSalary: $110,000 - $140,000 DOE FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future. Powered by JazzHR ZQKVdsSvfF

Job Description Overview Related Digital is a leading vertically integrated data center development and investment platform. We deliver digital infrastructure solutions to hyperscale technology companies so they can accelerate artificial intelligence and cloud computing ambitions. Founded by Related Companies, one of the most prominent, privately-owned real estate development firms in the United States, Related Digital uniquely combines Related’s 50-year+ history of executing complex real estate and infrastructure projects with its track record in real estate investing and clean energy solutions. With a multi-billion-dollar, near-term development pipeline in the U.S., Related Digital has the expert capabilities, depth of expertise and national scale to help hyperscale companies significantly grow their data center capacity on a rapid timeframe. Strategic Advantage: Related Digital harnesses expertise across real estate development and investment, data center development, complex infrastructure construction and clean energy development to bring differentiated solutions to hyperscale technology companies. National Footprint: Related Digital is based in New York and Dallas with operations across the United States. Related Companies has offices in gateway cities across the U.S. and London, and developments in 28 states and the District of Columbia, and boasts 4,000 employees. We are proud to be an equal opportunity employer and are deliberate about the team and culture we are building. We aim to ensure competitive total compensation that is commensurate with experience, workplace geography, and market standards. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at . #RelatedDigital #LI-RB1 #Onsite Responsibilities We are seeking an experienced Electrical Engineer with a strong background in data center design to join our data center procurement team, which supports our growing development pipeline. This team is responsible for establishing equipment standards, evaluating long-lead vendors, and driving technical decision-making that supports OFCI procurement strategies. This individual will play a key role in the design, technical evaluation, and delivery of complex, mission-critical facilities and should have deep experience in high-reliability power systems, redundancy, and large-scale electrical infrastructure. This position will be based full-time at our Hudson Yards headquarters. Responsibilities: • Lead and coordinate electrical design for data center projects from concept through construction, ensuring alignment with procurement strategy and long-lead equipment requirements., • Develop and review power system layouts, single-line diagrams, load calculations, and technical specifications for OFCI equipment such as switchgear, UPS, generators, and PDUs., • Support vendor prequalification, bid evaluation, and equipment standardization across the platform., • Ensure electrical designs meet project performance goals, code requirements, and industry standards (NEC, IEEE, NFPA 70E)., • Collaborate closely with internal project managers, procurement leads, mechanical engineers, construction teams, and external consultants to ensure coordinated technical solutions., • Evaluate utility service requirements and coordinate with local utility providers for medium- and high-voltage service connections., • Review and approve submittals, RFIs, and shop drawings during construction., • Support commissioning activities and validate system performance, redundancy, and reliability., • Participate in value engineering, risk assessments, and constructability reviews., • Stay current on emerging technologies, sustainable energy solutions, high-density cooling/power trends, and innovations in electrical equipment manufacturing. Qualifications • Bachelor’s degree in Electrical Engineering or related discipline; PE license preferred., • 5- 10 years of professional experience in electrical design, with a focus on data centers, mission-critical facilities, or large-scale commercial infrastructure., • Deep understanding of power distribution systems, UPS, generators, grounding, lighting, and fire alarm systems., • Familiarity with power modeling and load analysis software (e.g., SKM, ETAP, Revit MEP)., • Strong technical writing, organization, and communication skills., • Proven ability to manage multiple priorities in a fast-paced environment., • Collaborative mindset and ability to work effectively with cross-functional teams and external partners.

Job Description (SME) Subject Matter Expert - Mechanical – Part-time Do you have 20+ years of experience in the MEP Engineering business as a mechanical engineer and are looking for a part time position to pass your knowledge down to future generations. We have the perfect opportunity for you. This position is very flexible with schedule and working arrangements. As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. We are seeking a Technical Manager-I to join our team in any of our US. Office locations or remote. As a Technical Manager – Mechanical, you will be responsible for updating mechanical content for our Knowledge Den and Syska's technical standards and specifications. Our dynamic work environment provides the optimal setting to take your career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedules and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities As a Mechanical Technical Manager, you will provide your technical knowledge and produce mechanical standards as part of Syska Expert Teams and Knowledge Den. Additional responsibilities include: • Creating Technical Content for our Knowledge Management Database called the Knowledge Den, • Creating/Updating the Company's Specifications, • Creating/Updating the Company's Standard Details, • Creating/Updating firmwide Calculation Spreadsheets, • Training / Mentoring Junior Engineers, • Bachelor's degree in Mechanical engineering from an Accredited Institution, • 15+ years' experience working in a consulting firm, this is a Senior level role that requires a background in the MEP Engineering Industry As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. Syska wide Pay Range$104,652—$152,000 USD

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . The R&D Formulation Manager/Principal Scientist will lead the design, development, and implementation of novel formulations and polymer materials for use in medical devices, ensuring all activities meet quality and regulatory standards. This role involves providing expertise in formulation development, building and optimizing internal capabilities to deliver innovative and efficient solutions, and ensuring alignment with the company’s long-term technical vision to create a strong pipeline of customer-focused innovations. Key responsibilities include developing and characterizing formulations, recruiting and onboarding talent, managing technical collaborations with external suppliers and vendors, and integrating formulations into scalable manufacturing processes, whether in-house or through CDMOs. This role operates in a collaborative, cross-functional environment, requiring flexibility, a strong focus on scientific formulation, and a drive to explore new technologies and techniques in pursuit of robust, innovative materials and products. This is a senior technical role overseeing a small team. The R&D Formulation Manager/Principal Scientist is expected to be a subject matter expert in areas including polymer material science, formulation strategies, analytical chemistry, and biomaterial interactions with biological systems. They are responsible for ensuring high standards in research practices. They are responsible for leading the creation of documentation required for regulatory submissions, developing strategies for grants and publications, and securing non-dilutive funding through grant opportunities. They will report to the Vice President Technology. This is a full-time, on-site position, located in Brooklyn, New York. Responsibilities • Lead, staff, and manage formulation development teams and their efforts across multiple parallel product development opportunities, to launch new commercially successful products., • Provide sound scientific leadership, monitoring, and coaching through the initiation, planning and execution their team’s overall activities., • Create and lead experimentation for exploratory and/or product development research with focus on polymeric materials and their use., • Exercise technical judgment in the design, execution, and interpretation of experiments within the scope of project responsibilities and ensure the use of professional concepts to solve complex problems in creative and effective ways, in conformance with scientific methods and procedures., • Lead material/design/process changes through design control process, with well-documented research/analyses., • Review and author protocols and reports including development studies and design verification/validation activities., • Develop and implement investigations into new technologies and capabilities, partnering with business development, that advance research team and company objectives., • Lead efforts in chemical and mechanical property evaluation to assess the desirability of process or formulation changes. Develop test method capabilities to support R&D (exploratory research, product development) and production test requirements., • Develop unique, proprietary (and ideally patentable) intellectual property that yields competitive advantage., • Lead and participate in voice-of-customer (VOC) labs and influence go-to-market strategies., • Interface with customers, suppliers, and internal cross-functional team members to develop specifications and coordinate prototype fabrication., • Work as part of a cross-functional team to develop, verify, and validate product designs through bench, in-vitro, and in-vivo testing and other assessments., • Ensure an effective documentation system is in place and utilized throughout the development process inclusive of R&D lab notebooks, design reviews, test methods, and test reports., • Maintain active dialogue with Regulatory Affairs as subject matter expert on all product design elements/documentation pertaining to research towards FDA/regulated authority submissions,, • Act as research liaison between R&D and Quality Control to define product specifications., • Maintain active dialogue with Manufacturing to ensure successful technology transfer and process development, including the review of research-related documents, • Provide guidance and support to commercial teams, support introduction of new technologies with development of presentations, sales tools, formulations and applications data., • Communicate results to the scientific community via published papers. Present research at academic/industry symposia as an external representative of the company., • Work with company leadership to evaluate existing research practices and contribute to a culture of ethical, high-quality research operations within the organization. Required Qualifications • Master’s degree in Chemistry, Materials Science, Chemical Engineering, Polymer Science, or a closely equivalent discipline., • A minimum of 10 years of research experience in developing and utilizing polymeric materials, biomaterials, or other complex materials toward product/application development and their manufacture, with at least 5 years in a non-academic setting., • A minimum of 2 years of direct management experience., • Adept experimentalist with hands-on research experience with polymers, coagulation chemistry, and materials science of complex systems, including the development of structure-property performance relationships in designing and characterizing these materials., • Demonstrated ability to solve difficult technical problems and deliver practical solutions that meet the application requirements, along with a fundamental understanding of the chemistry that drives the performance required. This includes strong analytical, problem-solving, and decision-making skills with the ability to be observant and to think creatively., • Direct experience in new product development from concept to regulatory approval through launch., • Demonstrated ability to design experiments and analyze data with the use of appropriate quality and statistical methodologies is required., • Excellent verbal and written communication skills, with the ability to lead in a dynamic and collaborative environment is required., • Highly organized and detail-oriented, with the ability to extract key facts from complex information and create/present clear and concise technical documentation is required., • Demonstrated ability to lead and inspire teams and develop and mentor individuals, and allocate resources strategically and according to the portfolio priorities., • Requires strong leadership and organizational skills with a strong attention to detail and multi-tasking skills while simultaneously keeping overall “big picture” view of projects, priorities, and strategies., • Experience working under pressure with tight timelines, with the ability to maintain a sense of priorities, focus, urgency, and delivery., • Strong working knowledge of Microsoft Office., • Legal authorization to work in the United States. Preferred Qualifications • Ph.D. in a relevant discipline is strongly preferred., • Experience developing and commercializing products in a highly regulated environment, • Medical device development experience., • Demonstrated expertise in the use, development, and qualificication of material characterization techniques, including rheological, thermal, mechanical, spectroscopic, microscopic, and other chemical compositional methods., • Strong understanding of medical device regulatory requirements for Class II and III medical devices (e.g., 21 CFR Part 820), cGLP/cGMP, and related standards (e.g., ISO 13485)., • Strong understanding of cGMP, ICH guidelines, • Six sigma green belt or black belt certification., • Experience with executing a grant and publication submission strategy, knowledge of and strong track record with SBIR submissions to multiple agencies, including NIH and DOD is strongly preferred., • Demonstrated experience in Project Management and Product Lifecycle Management practices, and the ability to lead multiple projects simultaneously., • Excellent problem-solving skills and a proactive approach to addressing formulation challenges. Cresilon is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time. Benefits BENEFITS • Competitive annual base salary range of $130,000 - $180,000, depending upon qualifications., • Paid Vacation, Sick, & Holidays, • Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage, • Company Paid Life and Short-Term Disability Coverage, • Work/Life Employee Assistance Program, • Monthly MetroCard Reimbursement, • 401(k) & Roth Retirement Savings Plan with company match up to 5%

Job DescriptionFinal compensation will be based on a combination of:· Relevant work experience· Education· Project size · Project location· Required working hours· Candidate subject matter expertise and/or specialty · Ability to be approved by agencies/owners as required· Come bridge the gap between you and your career goals! Recently ranked as a best U.S. construction workplace by Fortune Magazine, MLJ Contracting is driven by passion and built on trust. When you work at MLJ, you work for a company that values your well-being, your talent, and your career aspirations. If you are looking for a fulfilling career, come join our family and turn big ideas into even bigger realities. As a premier general contractor in the heavy construction market, MLJ Contracting successfully performs major public works projects for client agencies across the New York city area. Proud of our quality workmanship and engaging projects, we always maintain the highest standards of safety and professionalism. Want to build a career that stands the test of time? Join MLJ and lay the foundation for a better future. The Scheduler's primary function is to provide strategic and CPM scheduling oversight for MLJ projects. You will provide schedule guidance to enable identification and verification of project timelines, sequencing including associated constraints, risks and potential resource bottlenecks. You will also work closely with our cost estimating and business development teams. An understanding and familiarity with estimating concepts is required. Keys to success will be instituting corporate project controls and guidelines, and direction and input on baseline schedules, schedule updates and schedule impacts associated with AWOs (Change Orders) and claims. II. EDUCATION/CERTIFICATIONS • Provide guidance, direction, and specialized assistance for the resolution of difficult and complex project control problems., • Expert in Critical path analysis and mitigation as well as network logic analysis., • Directly support PM and their teams regarding initial phasing plans, CPM schedules., • Provides project teams and executive management with the necessary tools for project cost control., • Development of the work breakdown structure, interfacing with all affected departments., • Analysis, evaluation, forecast, and reporting of schedule status against an established baseline., • Assist in cost forecasting and planning meetings, • Performance reviews and provides personnel development for the assigned employees., • Preparation of historical data to help create more meaningful information that can be used for project acceleration., • Assess impact(s) of design/construction changes and schedule slippages., • Development or maintenance systems to show the hierarchy of plans and schedules to ensure that project teams and executive management are fully informed of the project status and schedule risks., • 5+ years of experience in a lower-level Project Controls position is required. MTA and public agency project experience is preferable., • Basic engineering knowledge of electrical, mechanical, civil, or a related construction/engineering principle., • Proficient PC skills including various Project Controls software, ideally Oracle Primavera, and Microsoft Office Suite., • Must have potential to perform as lead Project Scheduler, • Solid communication skills., • MLJ does not offer work-from-home options. Depending on the assignment, the successful candidate will be expected to report to a project office or the main office daily. #ZR Salary Range:$110,000—$170,000 USDCompany DescriptionIovino Enterprises is the parent company to four New York City based construction companies that share a common commitment to excellence, innovation, and exceptional results. Unlock your potential and seize the opportunity to be at the forefront of a construction empire. As a product of 35 years in the construction business, we have harnessed expertise in cutting-edge technology, human capital management, finance, and legal/compliance, all while fostering an environment where each company retains its distinct personality and style. This “family of companies” culture is rooted in a common vision and set of values: respect, development for all employees regardless of position, and a commitment to give back to our communities.Iovino Enterprises is the parent company to four New York City based construction companies that share a common commitment to excellence, innovation, and exceptional results. Unlock your potential and seize the opportunity to be at the forefront of a construction empire.\r\n\r\nAs a product of 35 years in the construction business, we have harnessed expertise in cutting-edge technology, human capital management, finance, and legal/compliance, all while fostering an environment where each company retains its distinct personality and style. This “family of companies” culture is rooted in a common vision and set of values: respect, development for all employees regardless of position, and a commitment to give back to our communities.

Job Description Position: Field Sales Engineer Location: Secaucus, NJ Amphenol High Speed and Commercial Products Groups are the market leaders for high speed, high bandwidth electrical connectors for the Telecom/Datacom and Diverse market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEMs globally. Our global headquarters are located in Nashua, NH and we have design, sales, and manufacturing locations globally. We are currently seeking Field Sales Engineers to join our Enterprise and Data CenterSales teams in Secaucus, NJ. RESPONSIBILITIES: Our customer's ultimate success depends on our ability to solve cutting edge problems in relation to high bandwidth signal transmission. We value our relationships with these companies, and we depend on our Sales and Field Applications Engineering Teams to foster this ongoing partnership. As a Sales Engineer you interface with our external customers and internal product development, product marketing, and application teams.Sell and promote all Amphenol products within an assigned territory and defined accounts, either through WSP/OEMcustomersand/or distributors, via successful design win (AVL) activities and total channel management. Help devise strategies to differentiate our products and solutions from our competitors. Broaden customer base and increase penetration at existing accounts, including key global accounts. The role of Sales Engineer gives an excellent insight into the Sales, Marketing, Technical, and Product Development functions of the organization. • Provide sales leadership, and work closely with Field Applications Engineer and Business Units, • Promote and sell Amphenol products with established customers and developing new prospects., • Identify all interconnect opportunities/applications of Amphenol products for clients and work with the customers engineering team to design in new products, • Develop and implement sales plan and growth strategy for territory and customers, • Meet and exceed strategic objectives and established sales quota via new design wins and management of the entire sales channel, • Motivate existing and potential customers to increase product content on the design, • Support technical aspects of the sales cycle including marketing support for the development and implementation of Amphenol products, • Provide customer service to solve complex interconnect problems and technical inquiries, • Track orders and revenue by customer, • Build rapport and provide customer support by supplying information related to samples, delivery dates, part drawings and specifications, quality issues, credit issues, etc., • Develop a thorough understanding of the market and competition in your territory., • Keep informed of new products and other general information of interest to customers., • Bachelor's in Electrical or Mechanical Engineering with Business/Marketing aptitude or a Bachelor's in Business with work experience in a technical sales field, • Knowledge and understanding of interconnect solutions industry, • 5+ years of fieldsales and applications experience, or related experience (inside sales or customer service with interconnect, passive, electromechanical components), • Sales skills to successfully negotiate a technical design win, approved vendor status, contracts, and customer partnership., • Technically astute with an ability to acquire extensive product and application knowledge, with an ability to assess, and provide solutions for, customer design challenges/needs, • Self-motivated and driven to identify, qualify and pursue new customers and new markets, • Ability to effectively communicate across the engineering and managerial functions of a business, • Strong oral and written communications to provide high level customer service and build relationships, • Organizational skills to anticipate, prioritize, plan, organize to meet and exceed strategic objectives, • Leadership skills to assess and drive new opportunities in a global account environment, • Knowledge of modeling tools Pro E or Solidworks Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin For additional company information please visit our website at

Job Description Job Title: Technical Advisor (Patent Litigation – Software/Technology) Location: New York, NY Employment Type: Contract (3–6 months, with possible extension) Compensation: Competitive, based on experience About the Role Direct Counsel is seeking a highly skilled Technical Advisor to support a sophisticated intellectual property litigation team. This contract opportunity will focus on technology-driven disputes involving patents, trade secrets, and copyrights, particularly in areas related to software, algorithms, and digital content. This is an excellent opportunity for a technically advanced professional to work alongside top-tier attorneys on complex, high-stakes matters. Key Responsibilities • Conduct detailed technical analysis in support of patent and IP litigation matters, • Perform infringement and non-infringement analyses, • Lead and coordinate prior art searches and assist in invalidity analysis, • Collaborate with attorneys to develop case strategy and technical arguments, • Analyze software systems, algorithms, and digital technologies relevant to disputes, • Ph.D. or Master’s degree in Computer Science, Electrical Engineering, Mechanical Engineering, or a related technical field, • Prior experience supporting patent, trade secret, or copyright litigation, • Strong background in software, algorithms, and/or digital technologies, • Experience conducting prior art searches and technical analysis for patent invalidity, • Prior experience working with law firms or in litigation support roles, • Familiarity with IP litigation processes and expert witness coordination, • A detail-oriented, highly analytical professional who thrives in a fast-paced environment, • Strong collaborator who can work closely with attorneys and experts

Job Description Pactiv Evergreen is now a part of Novolex. Novolex is a leading manufacturer of food, beverage, and specialty packaging that supports multiple industries, including foodservice, restaurant delivery and carryout, food processing, grocery and retail, and industrial sectors. Our innovative product portfolio is designed to meet the diverse needs of businesses worldwide and the millions of customers they serve. Through continuous investment in research and development, we are committed to engineering more sustainable choices for the future. Our extensive manufacturing network spans North America and Europe, including two world-class plastic film recycling centers. Discover more about Novolex, our 20,000+ family members and our commitment to innovation and sustainability at . Our Social Responsibility platform features a robust, employee-led Give Back program, which includes a matching gifts plan, community grants initiative, and our annual Company-wide Month of Action campaign. With each of these initiatives, our employees are empowered and equipped to give back to their communities and support the non-profits important to them and their families. Through our Give Back program, we own our commitment to Social Responsibility and live our purpose of Packaging a Better Future. Job Description This position provides support for the reliability of all automation and control systems throughout the facility. The individual will work closely with all plant personnel to perform tests, diagnostics, repairs, improvements and upgrades to all equipment, instrumentation, process and procedures. Responsibilities: ● Drive a zero EHS incident culture, support and participate in incident investigations to determine root cause and identify preventive actions, correct unsafe conditions and acts immediately, and use every incident or near miss as a teaching moment for others ● Monitor, adjust, calibrate and repair manufacturing equipment, instruments, fixtures, etc. ● Conduct in-depth PLC, HMI, motor and drive troubleshooting and provide effective solutions – Allen Bradley required with at least one other manufacturer (i.e. Mitsubishi, Schneider, GE, Opto 22, etc.) ● Read and modify PLC ladder diagrams ● Perform electrical and electronic installations and modifications including drives and programming controllers ● Working knowledge of AC vector and servo drive technology. ● Understand in-depth electric circuitry, electronics and electromechanical concepts - AC and DC, Sinking / Sourcing, Analog, etc. ● Troubleshoot and maintain Fanuc robotic automation. (Palletizers, Case erectors, Pick and Place) ● Basic understanding of hydraulics, pneumatics and mechanical concepts ● Basic understanding of PC components ● Interpret all levels of drawings, wiring diagrams, schematics, specifications, etc. Knowledge of CAD system (i.e. AutoCAD, Vizio, etc.) ● Stay up to date with the latest state-of-the-art automation and control techniques ● Utilize problem solving techniques including PDCA to solve problems to root cause, implement actions that prevent reoccurrence, improve operations, etc. ● Supply higher level technical assistance to plant shift electrician team ● Provide training to all levels of the organization ● Ability to supervise contractors to minimize scheduled and unscheduled downtimes ● Maintain and manage the engineering department technical procedures, manuals and drawings, including records of as-built equipment and process changes ● Occasional need to work flexible hours. May include weekend and/or holiday work, subject to call-ins Qualifications: ● High school graduate or equivalent required ● Apprenticeship or equivalent training ● Associate’s degree in maintenance or industrial technology preferred ● Minimum five years of industrial maintenance experience with extensive automation and controls work ● Proficient in computer applications including Microsoft applications, Outlook, SAP, etc. ● Knowledge OSHA Electrical Standards, National Electric Code (NEC) ● Strong troubleshooting skills and logic to solve problems to root cause ● Proactive and self-motivated to work effectively with minimal supervision ● Good written and verbal communication skills ● Ability to make decisions under time constraints and tight deadlines ● Able to interact with other associates in a team-oriented environment Pactiv Evergreen is committed to a diverse and inclusive workforce. Pactiv Evergreen is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age national origin, physical or mental disability, genetic information, gender identity and/or expression, marital status, veteran status or other characteristics or statuses protected by law. For individuals with disabilities who would like to request an accommodation, please call (847) 482-4320 or email . All information will be kept confidential according to EEO guidelines and applicable laws. You should be proficient in: • Creating Preventive Maintenance Plans, • Mechanical Troubleshooting Skills, • Electrical Installation, • Electrical Troubleshooting, • Electrical Repair, • Pneumatics Troubleshooting, • Programmable Logic Controller (PLC) (Allen Bradley)

Job Description A client of AlphaStaffHCM is seeking an experienced and talented Senior Hardware Engineer to be part of our hardware development efforts. As a Senior Hardware Engineer, you will be responsible for designing, developing, and testing advanced hardware systems. This position offers a unique opportunity to apply your expertise and skills in a challenging and innovative technology environment. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities: • Support the development of several platforms based around classical and quantum photonics as a senior hardware engineer., • Work alongside other hardware engineers to design custom electronics using Altium Designer., • Evaluate critical component performance via board-level and system-level lab testing (ADCs, DACs, FPGAs, TDCs, etc.), • Work with firmware engineers, software engineers, and quantum scientists during various phases of lab testing., • Work with contract manufacturers during manufacturing phases to procure custom electronics, addressing and mitigating any necessary design changes along the way., • Validate the performance of custom electronics with lab testing. Document any issues uncovered during testing., • Maintain documentation expected at milestone events during the entire design cycle (theory of operations, manufacturing documentation, validation testing results, etc.), • Integrate hardware into the complete system by working closely with mechanical, firmware, and FPGA engineers. Required Skills and Experience: • Bachelor of Science (BS) in Electrical Engineering or Computer Engineering (EE or CE) from an accredited university., • BS in EE or CE and 6+ years of experience or MS EE or CE with 4+ years of experience., • Proven experience designing PCBs from schematic capture, layout design, and review., • Experience with at least one ECAD suite (Altium, OrCAD, Allegro, CircuitMaker, or others) Altium is strongly preferred., • Familiarity with PCB design best practices related to Signal Integrity, Power Integrity, and EMI/EMC compliance., • Strong foundation in PCB design related to DFM, DFT, and DFA best practices., • Strong electrical engineering fundamentals in Analog, Power, and Digital Electronics., • Advanced experience with voltage regulators, LDO, and switch mode power supplies (SMPS)., • Experience with analog electronics design (op-amps, TIAs, filters, etc.), • Experience with digital electronics design (Logic Gates, Flip Flops, Microcontrollers, RAM, ROM, Flash, etc.), • Advanced knowledge of simulation tools such as SPICE., • Strong experience with low to medium-speed digital interfaces and protocols (I2C, CAN, UART, SPI, etc.)\, • Hands-on experience with board bring-up, debugging, testing, and integration with lab instruments such as: DMMs, Oscilloscopes, Logic Analyzers, and Spectrum Analyzers., • Able to code C, C++, MATLAB/Octave, or Python., • Working knowledge of Verilog is a huge plus., • Able to lift weights up to 50lbs (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Additional Preferred Skills: • Master of Science (MS) degree in Electrical Engineering or Computer Engineering (EE or ECE)., • Experience designing electronics with complex computing devices such as FPGAs, MCUs, CPUs, DSPs, etc., • Experience working with optoelectronics., • Experience with high-speed serial protocols (USB, PCIe, Ethernet, etc.), • Experience with RF analog, digital, and mixed-signal electronics., • Experience designing systems to meet compliance and certification requirements (e.g., CE/FCC)., • Experience integrating custom ASICs into designs., • FPGA/SoC/MCU lab validation with lab equipment., • Experience writing low-level firmware (C, Verilog, VHDL, etc.), • Experience with manual board prototyping/refurbing using essential equipment like soldering irons and hot air guns. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job Description Position Description A client of AlphaStaffHCM is seeking a motivated and enthusiastic Mechanical Engineer to join our dynamic engineering team. As a Mechanical Engineer, you will play a key role in the design, development, and testing of hardware components for our innovative projects. This position drives the mechanical design of server chassis for quantum photonic systems, the structural platforms that house, support, and stabilize quantum computing hardware ensuring precise integration of electronics, power distribution, cabling, cooling and optical components. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities • Closely work with engineering teams to review the product specification and design of chassis mechanical, thermal, system architecture to enable competitive, high quality server chassis products, • Support the development of several platforms based around classical and quantum photonics as a mechanical engineer., • Drive designs from concept to mass production, focusing on functionality, reliability, manufacturability and cosmetic requirements., • Create and publish detailed 3D CAD and 2D drawings for designs including GD&T, material selection and manufacturing methods., • Collaborate with external vendors and manufacturers to support product development, prototyping, and production readiness, • Cross-functional work with internal teams such as hardware, photonics, operations, and product managers to deliver products that meet performance, cost, and schedule requirements., • Participate in the prototyping and assembly of products and proof-of-concept models. Soldering work will be present., • Work closely with senior engineers to implement design changes and enhancements., • Maintain accurate documentation of design changes, test procedures, and project progress., • Prepare reports and presentations for detailed design reviews. Required Skills and Experience • Bachelor of Science (BS) or Master of Science (MS) in Mechanical Engineering, Product Design or related field from an accredited university., • Minimum 3-4 years of full-time experience in the design and correlation of mechanical components including: plastic or metal parts, mechanical assemblies, printed circuit boards or flexes., • Product development and management experience in server chassis mechanical, thermal, and system design, • Experience with server system architecture and server chassis layout optimization, • Experience in developing server product architectures and carrying through to production., • General technical knowledge in multiple manufacturing methods used in consumer products such as 3D printing, urethane casting, injection molding, sheet metal, CNC machining etc., • System integration experience, including electro-opto mechanical components (Optics, lens, Motors, Mirrors, translation stages etc.), heat transfer and product architecture, • Experience with using CAD tools such as Solidworks, NX or Creo, and PDM tools such as Solidworks PDM, Windchill (Solidworks and SolidworksPDM experience is preferred), • Familiar with product development cycles, • Experience working with manufacturing vendors and suppliers, • Ability to work in a startup environment., • Technical knowledge in general materials., • Able to lift weights up to OSHA limit (50 lbs.) when required (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Preferred Skills and Experience • Prior work on server chassis design or data center server hardware is highly valued, as it demonstrates familiarity with the unique challenges of complex system integration of optical, electrical, and mechanical components., • Experience with designing airflow paths, heat sinks, fans, or liquid cooling loops that keep cutting-edge systems within safe temperatures., • Strong understanding of compliance-driven design requirements, including EMI and ESD. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job Description As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical smart and mission-critical buildings that include sustainably designed high performance mechanical and electrical systems. We are currently seeking a performance-driven, highly motivated Platform & Integration Analyst for our New York, NY office. The ideal candidate will have the cross-functional role responsible for analysis, configuration, integration, and continuous optimization of the firm's core business platforms. This position will blend platform ownership, system analysis, business process enablement and integration support. Job Responsibilities: As the platform & integration analyst, you should be able to understand how enterprise systems connect and how data flows between applications and diagnose root causes in workflows, integrations, and data issues. You will work cross functionally and communicate clearly with all stakeholder groups in the firm and adapt to new tools, features and integration patterns and provide a firmwide vision for enterprise systems and guide the organization toward a modern, scalable, data-driven platform. Additional Responsibilities: • Serve as a platform analyst/product owner for one or more enterprise systems., • Partner with business stakeholders to gather and document requirements, analyze current-state vs. future-state processes, and recommend system/process improvement., • Configure and maintain platform features including workflows, automation, validation rules, data models, permissions, and system defaults., • Maintain platform documentation including process flows, integration diagrams, data mappings, and operational runbooks., • Ensure platform remains stable, well-configured, and aligned with evolving business needs., • Support or build integrations using Mulesoft, including System, Process, and Experience APIs., • Implement and maintain low-to medium- complexity flows, basic DataWeave transformations, and error handling/logging patterns., • Develop or refine API specifications (RAML/OAS) and contribute to API-led connectivity design., • Act as a technical liaison between platform owners, business users, and integration developers and consultants., • Assist with integration troubleshooting, performance monitoring, environment management, and deployment coordination., • Identify opportunities to reduce manual work, improve data quality, and streamline end-to-end business processes., • Contribute to automation initiatives, including workflow automation, orchestration, and early intelligent automation efforts., • Support enhancements across cross-platform processes and help design solutions that improve efficiency and user experience., • Partner with application vendors, implementation partners, internal developers, and system administrators., • Translate business requests into clear technical requirements, integration plans, and configuration blueprints., • Assist with platform upgrades, feature releases, regression testing, and user acceptance testing. We are looking for a platform & integration analyst who can assist in translating business needs into technical solutions and structured documentation. To succeed in this role, your technical expertise must be complemented by self-motivation, relationship building skills, effective communication skills, and the ability to effectively work in a fast-paced environment. The ideal candidate will have hands-on experience with enterprise SaaS platform (Salesforce or similar), understanding of API concepts and the ability to configure platform components including workflows, automation, validations, and permission structures. Preferred Qualifications: • 3+ years experience in a Salesforce environment as a technical resource (Admin, Developer, QA, DevOps, etc.), • Experience with Certinia at the Admin level or above is desirable, • Mulesoft development experience or exposure, • Salesforce, Mulesoft, and/or Certinia certifications are a big plus, • Exposure or experience to programming languages such as JavaScript, LWCs (Salesforce), Java, Apex, Python, etc., • Experience with DevOps and CI/CD concepts and tools, • Bachelor's degree, • 4-8 years' experience working in Information Systems, • Familiarity with RPA, workflow automation, ETL, or iPaaS tools is beneficial., • Strong ability to translate business needs into technical solutions and structured documentation, • Comfortable analyzing data quality issues, process gaps, and integration breakpoints., • Ability to read, understand, and create system diagrams, process flows, integration specs, and data mappings. As a Platform & Integration Analyst with Syska Hennessy Group, you will be a part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range$106,568—$159,852 USD

Job Description Energy Engineer - Mid-level (NY) This role will be an integral part of our expanding team and services to provide commissioning, energy auditing, and retrofit services to multifamily, commercial, institutional, cultural/art center, and community center buildings in the NYC Metropolitan area and beyond. The role involves work on the NYC Accelerator Program, developed by the Mayor’s Office of Climate and Sustainability. This program provides free, personalized guidance for buildings throughout the five boroughs, with the aim of reducing city-wide building energy consumption and greenhouse gas emissions. We are looking for qualified individuals for our New York City office. The successful candidate will demonstrate the ability to complete the following tasks with the technical and interpersonal skills outlined below that will help him or her excel at USL. This posting is for a mid-level position (2-5+ years of experience). USL’s NYC office is not fully reopened due to COVID-19. These positions will require site visits but will otherwise be a work from home position, initially. This position reports to a Senior Engineer / Consultant. Primary Responsibilities for the position will include: • Perform project work for:, • Commissioning projects for new construction and existing building retrofits., • Benchmarking, energy auditing, and retro-commissioning for existing buildings., • Complete technical project work including:, • Review construction documents and provide recommendations to improve. constructability, indoor air quality, energy efficiency, and operations., • Review submittals, code requirements, and develop testing plans., • Inspect installations of building equipment., • Review and perform both central plant and terminal unit functional testing., • Perform trend analysis., • Lead development of energy savings strategies and calculations., • Review energy savings calculations of others for correctness and for adherence to incentive and clean energy financing program rules., • Provide written technical and non-technical issue log findings and reports for program compliance and ownership review., • Perform project work for the NYC Accelerator Program, • Collaborate internally across teams to collate best practices and the latest reports/case studies on high performance new construction strategies, energy efficiency technologies, and training strategies., • Assist with the analysis of large data sets for existing and new building database compilation., • Assist with the development of written technical resources for the program to convey building science technologies to industry stakeholders., • Work with internal stakeholders including project managers, energy modelers, sustainability consultants, accessibility consultants, etc., • Assume primary responsibility for the execution of small projects including project financials., • Lead communication with building owners, developers, architects, engineers, and contractors., • Train Entry Level staff members when applicable. Knowledge, Skills, and Abilities Below is a list of the minimum requirements for the position. Required industry knowledge, and skills • Bachelor’s degree in Engineering., • 2 – 5+ years of relevant and consecutive work experience. Work experience relevant to this position must include experience with HVAC systems in large multifamily or commercial buildings., • Experience conducting field inspections related to mechanical, electrical, and plumbing equipment., • Experience working with large data sets., • Experience managing small to mid-size projects., • Understand common HVAC systems and emerging high-performance alternatives. Familiarity with: • LEED Rating Systems., • Utility billing analysis and energy savings spreadsheet calculations., • Energy Code and/or ASHRAE standards., • NYC Local Laws related to energy and climate (Local Laws 84, 87, 95, and 97), • Excellent communicator and presenter able to explain complex concepts to a variety of stakeholders., • Attention to detail., • Strong oral and written communication skills., • Well-developed interpersonal skills, maturity, credibility, confidence, and integrity., • Strong time-management skills and experience managing multiple priorities at once., • Collaborative with strong focus on teamwork., • Excellent work ethic., • Self-motivated., • Passionate about optimizing MEP systems and improving the built environment. Duties, responsibilities, and activities may change at any time with or without prior notice. Physical Demands: While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to type, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. When in the field the employee must frequently lift or move objects up to 20 pounds; must be able to climb stairs and endure typical construction site conditions. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Travel Required: Occasional overnight travel may be required (Less than 10%). Frequent local field visits in the Office Metro area will be necessary (estimated at 40-50%). A valid and clean driving license is required. Working Environment: Approximately half of the duties will be performed in an office environment. The remainder of the duties will be performed in the field which will involve trips to projects sites for observation and training. Performance Standards: Performance will be evaluated against this job description, competencies for this level, and mutually agreed goals Applications submitted without a cover letter will not be reviewed EQUAL EMPLOYMENT OPPORTUNITY USL Technology Consulting Inc. is committed to diversity in its programming; creating a work culture and inclusive environment that is reflective of New York City demographics. USL encourages and actively recruits applicants representing dimensions of diversity that include — but are not limited to — military service, age, national origin, ethnicity, race, religion, ability, sexual orientation, gender, or political affiliation. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. Company DescriptionAt USL Technology, we are guided by a collective sense of purpose, an important differentiator in attracting talent. Performance is the only route for us to remain competitive. We appreciate and recognize our enthusiastic buy-in to our core purpose backed by a powerful sense of collective pride and a respect for individual’s/your need to grow. We are bonkers or shall be say maniacal about driving high performance, but we are also a family! We continuously strive to deliver Smart Sustainable Solutions. We are a technology, sustainability and energy engineering consulting firm that focuses on a system thinking approach on high-performance building working with building owners, architects, contractors and design engineers to help owners comply with the local laws and deeper energy retrofit implementations.At USL Technology, we are guided by a collective sense of purpose, an important differentiator in attracting talent. Performance is the only route for us to remain competitive. We appreciate and recognize our enthusiastic buy-in to our core purpose backed by a powerful sense of collective pride and a respect for individual’s/your need to grow. \r\n\r\nWe are bonkers or shall be say maniacal about driving high performance, but we are also a family!\r\n\r\nWe continuously strive to deliver Smart Sustainable Solutions. We are a technology, sustainability and energy engineering consulting firm that focuses on a system thinking approach on high-performance building working with building owners, architects, contractors and design engineers to help owners comply with the local laws and deeper energy retrofit implementations.

Job DescriptionJob Title: QC LIMS SpecialistMake an Impact at the Intersection of Science & Technology Are you a lab professional who thrives on both data integrity and system optimization? We’re looking for a QC LIMS Specialist who is passionate about improving laboratory operations through technology, ensuring high-quality data, and driving efficiency across critical workflows. In this role, you’ll be a key contributor supporting LIMS functionality, system integrations, and reporting, while working closely with lab leadership to enhance how data is captured, analyzed, and delivered. What You’ll Be Doing • Be a subject matter resource for LIMS, ensuring system performance, accuracy, and reliability, • Support and optimize laboratory workflows, ensuring compliance with QC and regulatory standards, • Maintain and enhance LIMS integrations and instrument interfaces, • Design and improve SQL Server databases to support lab operations and reporting, • Create impactful reports and dashboards using Crystal Reports and/or Microsoft Access, • Develop custom Electronic Data Deliverables (EDD) in Excel, CSV, and tab-delimited formats, • Troubleshoot and maintain Access/VBA applications used across the lab, • Partner with lab teams to identify opportunities to improve efficiency and data visibility, • Support overall system infrastructure and configuration within the lab environmentWhat You Bring, • Bachelor’s or Master’s degree in Chemistry, Life Sciences, Computer Science, or related field, • 2+ years of hands-on experience with Clinisys Element LIMS (v6 or v7), • Experience working in a QC, analytical, or environmental laboratory setting, • Strong technical skills, including:, • SQL Server (queries, development, maintenance), • Reporting tools (Crystal Reports, Access), • VBA troubleshooting and support, • A detail-oriented mindset with a passion for data accuracy and process improvementNice to Have, • Experience in an Environmental Lab (RCRA knowledge is a plus), • Background in Quality Control, R&D, or regulated lab environments, • Familiarity with regulatory reporting and compliance standardsWhy You’ll Love This Role, • Play a critical role in ensuring high-quality scientific data and compliance, • Work at the intersection of lab science and technology systems, • Gain exposure to LIMS optimization, data reporting, and system integrations, • Join a collaborative, mission-driven lab team focused on continuous improvement, • Opportunity to directly impact efficiency, accuracy, and decision-making in the labAdditional Details, • 100% on-site role in a laboratory environment, • Reports directly to Lab Leadership, • W2 position (no C2C) Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionJob Requirements The ideal candidate for this Sales Engineer role, offered as a Full Time Regular position, will be responsible for actively promoting and selling high-value, integrated, bundled, and stand-alone systems and/or equipment, along with other related advanced technology solutions within the Company's product portfolio. This individual will engage closely with contractors, consultants, and customers to understand their technical requirements, provide tailored solutions, and drive business growth by effectively communicating the value and benefits of the products. The role demands a strong technical background combined with excellent sales acumen to build and maintain long-term relationships, support project implementation, and contribute to the overall success of the sales team. Work Experience • Associate's degree in business, engineering and/or other applicable technology space required. Bachelor's degree preferred., • 1 to 5 years of related work experience preferred., • Preference to experience selling to HVAC Mechanical industry., • Basic knowledge and understanding of applicable building codes and plan and spec fundamentals is essential., • Excellent interpersonal skills and emotional intelligence is essential., • Strong Computer skills including Microsoft Office Suite and SalesForce CRM is preferred., • Be highly motivated and an independent thinker., • Strong communication, presentation and customer service skills required., • Ability to adapt and be flexible in a changing environment., • Ability to multi-task, work under pressure and meet deadlines required. Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment.

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: Responsible for driving new business and growing key accounts across the assigned territory through strategic prospecting, relationship building, and technical solution selling. Develop and execute sales plans, interpret plans and specifications to build accurate estimates, and partner with internal engineering and operations teams to deliver BAS/BMS solutions that meet customer needs. Responsibilities: • Develop and execute a strategic sales plan to achieve sales targets and expand the customer base., • Conduct regular visits to clients and prospects to build relationships and understand their needs., • Interpret plans and specifications and develop estimates, • Present and demonstrate products and services to potential clients, highlighting their benefits and value., • Collaborate with internal teams to ensure timely delivery of products and services to clients., • Maintain accurate records of sales activities, customer interactions, and market feedback in the CRM system., • Identify new business opportunities and develop sales strategies, • Other duties as assigned. Required Qualifications: • Bachelor's degree in Mechanical Engineering, a related field or equivalent industry experience, • 2+ years of experience in outside sales in the building automation industry., • Strong understanding of sales principles and customer relationship management., • Ability to interpret plans & specifications and estimate projects., • Excellent communication and interpersonal skills., • An established network in the construction and facility management fields in the NY / NJ or Northeast area, • Experienced in working independently and managing time effectively., • Proven track record of strategic sales and sales territory management, • Valid driver's license and willingness to travel within the assigned territory. Preferred Qualifications: • 5+ years of experience with Building Automation Systems (BAS) or related technologies., • Familiarity with CRM software and sales analytics tools., • Demonstrated ability to close sales and meet or exceed targets., • Network of contacts within the construction industry., • Experience with Tridium Niagara-based control systems Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sites, • The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Will be required to be on site with customers or contractors, with or without BBT colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction., • Driving to customer sites is required, • Limited overnight travel may be required Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job Description Supervising Electrical Engineer - Healthcare As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical inpatient and outpatient healthcare facilities with a focus on resilient design, as well as sustainably designed high performance mechanical and electrical systems. We are currently seeking a performance-driven, highly motivated Supervising Electrical Engineer for Healthcare for our New York, NY office. Your experience working in a consulting firm on healthcare projects will ensure your success in this role. You will contribute to the design of major projects across all types of medical programming and all phases of design. You will be part of a large team of over 100 engineers nationally with a wealth of experience, so this is a great opportunity to grow your career. Our dynamic work environment provides the optimal setting to take your career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedules and fun social events, it's everything you'll need for an exciting, challenging, and rewarding career. Job Responsibilities: As the Supervising Electrical Engineer, you will be the Engineer of Record on dedicated projects and be responsible for supervising and leading coordination meetings. You will lead and supervise staff members as they perform their tasks, and participate in budgeting, scheduling, and staff management. Additional responsibilities include: • Establishing design standards, specifications, and criteria for projects, • Supervising the preparation of reports, analyzing and developing system options and building conditions, • Maintaining interdisciplinary coordination with other trades/projects consultants, • Monitoring all correspondence between staff, clients, contractors, owners, etc., • Supervising construction administrative duties such as field reports, responses to RFIs, processing bulletins and addenda, etc., • Project management experience, • Periodic objective and comprehensive employee evaluations, • Participate in and contribute to the business unit Technical Leadership Committee Successful candidates must have a current PE registration and must have Healthcare design experience. In addition, a history of working with healthcare related infrastructure projects, adaptive reuse projects, new construction and/or renovation type projects would be a good fit for this dynamic role. • Bachelor's Degree in Electrical Engineering from an Accredited Institution, • 7+ years of Project Management experience, • 12+ years' experience working in a consulting firm, this is a Senior level role that requires a background in the MEP Engineering Industry, • 5 years of supervisory experience As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range$128,276—$170,414 USD

Job Description Join us as the Director of Engineering at the highly anticipated Rhyland Hotel, set to open this summer in vibrant Flushing, NY. This is a unique opportunity to lead our engineering and maintenance team from pre-opening through the exciting journey of establishing operational excellence. You'll play a critical role in ensuring our state-of-the-art facilities run seamlessly, creating a safe, welcoming, and exceptional environment for our guests and associates alike. If you're an experienced hospitality engineering leader who thrives on building systems, developing teams, and delivering outstanding guest experiences, we want you at the heart of our Rhyland Hotel team! Why Join The Rhyland Hotel? Prime Location: Situated in Flushing, a bustling hub of culture, dining, and commerce, with easy access to Manhattan and the surrounding boroughs. Exciting Opportunity: Be part of the launch of a brand-new hotel, offering a fresh and modern experience to guests. Growth Potential: Play a key role in our sales operations, with opportunities for career development in the hospitality industry. Essential Functions: • Independently manages maintenance personnel to include but not limited to the responsibility of hiring, training, administering performance reviews, determining wages, coaching and discipline, termination, and weekly scheduling., • Responsible for the proper operation and functionality of all electrical, mechanical, plumbing, HVAC, laundry, kitchen, refrigeration, lighting systems, and all specialized equipment and systems., • Performs and delegates property and grounds upkeep tasks, including painting, tile work, trim work, detailing, light adjustments, installations, cable/internet assistance, furniture repair, grout work, recycling and waste management, grounds keeping, etc., • Responsible for the pool maintenance, cleanliness, proper water chemistry and compliance with local department of health., • Ensure compliance with city, state and /or federal code., • Review work orders and complete work by room/guest priorities., • Ensure guestrooms, restaurant, and public areas are maintained to company standard., • Maintain continuous communication with Front Office during all shifts to ensure all complaints are addressed., • Primary liaison with 3rd party trades performing work as required., • Assume full responsibility for the condition of the property in the heart of the house (the infrastructure) as well as all the public areas., • Play a lead role in Energy conservation., • Cost effective management of equipment purchases or leasing, service contracts, repair and maintenance agreements, or sourcing local 3rd party tradesmen., • Management and achievement of budgeted capital and repair and maintenance operating costs., • Develop & maintain preventive maintenance programs for all guestrooms and equipment., • Responsible for continuous update of safety manual and all training for entire company including OSHA regulations, DOT testing, and Right to Know Law, and NFPA training., • Chair of Safety Committee., • Maintain an accurate inventory of supplies., • Ensure the Engineering shop and office are clean and organized., • Maintain department checkbook and code invoices for payment accordingly., • Oversee all engineers and maintenance personnel, including participating in the recruitment, onboarding, orientation, training, assessing/completing reviews, disciplining, and terminating of employees., • Address loss prevention management and security., • Have a thorough understanding of fire alarm procedures, emergency evacuation procedures and all safety related issues. Key liaison with town Fire Department authorities to work with GM to plan and perform regular quarterly evacuation drills., • Maintain all required permits and licenses for facility., • Dependent upon the weather, maintain safe walking areas for all guests and associates (activity required may include shoveling snow, raking leaves, addressing debris. Must play the primary role in Snow Removal in winter (including supervising outside contractor duties)., • Leadership role in curb appeal, landscaping, and grounds maintenance., • Ability to adhere to all HR Personnel standards and maintain a professional work environment with all Inn associates., • On call for any emergencies 24/7, • Address each and every guest using the S.E.A.C. method, with a smile, eye contact, acknowledge their presence in a timely manner with appropriate greeting, and kindly close., • Attend all scheduled meetings and training sessions., • Understand and practice all HCH safety and security procedures, including Emergency Evacuation Procedures, Accident Reporting, Right to Know Law, Written Information Security Program, Bloodborne Pathogen Procedures, Anti-Harassment Policy, and Violence in the Workplace Policy., • Comply with all Hotel and HCH time and attendance policies., • Comply with all Hotel and HCH uniform, dress code, and appearance standards. Hotel Specific Essential Functions: • Ability to remain standing for 10 hours., • Ability to remain in a stationary position for 10 hours., • Ability to frequently move and lift up to 80 lbs., • Ability to walk the property and grounds frequently, multiple times per shift., • Ability to move up and down stairs frequently., • Ability to bend frequently and repetitively during a shift., • Ability to use repetitive manual dexterity., • Able to kneel, crawl, crouch, and stretch into hard-to-reach places., • Ability to move quickly based on guest needs., • Ability to frequently communicate and exchange accurate information effectively., • Ability to read, write, understand and speak English., • Ability to operate a motor vehicle with valid operator's license. Technology and Equipment: • Microsoft Office, including Outlook, Word, and Excel programs., • Property Management System, • CB Radio, • Power Tools and handheld tools, • Blueprints, schematics, and other technical materials, • Computer and Printer, • Electronic/Mechanical gauges (thermometers, pressure gauges, etc.), • All room equipment, including vacuum cleaner, wallpaper steamer, carpet shampooer, etc., • All F&B equipment, including deep fryer, broiler, stove, steamer, food processor, slicer, flat top grill, mixer, oven, steam table, etc., • Sanding equipment, • Ladders, scaffolding, and support systems, machine operated lifts, • Snow removal tools and chemicals, • Time Keeping System

Senior Engineer – Retail Displays & In-Store Technology A growing experiential retail design and manufacturing company is seeking a Senior Engineer to support the development of custom retail fixtures, displays, and in-store technology platforms for nationally recognized beauty and consumer brands. This role will work closely with cross-functional teams to engineer innovative retail environments and branded experiences for major retail partners. The ideal candidate comes directly from the retail display, POP/POS, fixture manufacturing, or experiential marketing industry and has experience leading complex, high-visibility programs from concept through production. Responsibilities • Lead engineering execution for custom retail displays, fixtures, kiosks, and branded in-store environments, • Translate creative concepts into manufacturable engineering solutions while maintaining design intent, • Develop detailed mechanical designs, production drawings, BOMs, and technical documentation, • Partner closely with design, project management, production, and client-facing teams throughout the project lifecycle, • Support prototyping, fabrication, testing, and production readiness for national retail programs, • Evaluate materials, manufacturing methods, and cost efficiencies across projects, • Manage multiple concurrent programs in a fast-paced, deadline-driven environment, • Troubleshoot engineering and production challenges during development and rollout, • 8+ years of experience within the retail display, POP/POS, fixture manufacturing, experiential marketing, or related industry, • Prior experience with companies specializing in custom retail displays, beauty fixtures, or branded environments strongly preferred, • Strong background engineering metal, wood, acrylic, MDF, sheet metal, or mixed-material display systems, • Experience supporting programs for beauty, cosmetics, retail, or luxury consumer brands preferred, • Proficiency with SolidWorks and related CAD platforms, • Experience creating production documentation, BOMs, and prototype packages, • Strong understanding of manufacturing processes, fabrication methods, and production workflows, • Ability to balance engineering quality, speed, cost, and manufacturability in a client-driven environment, • Experience coming from a competitor or adjacent experiential retail/display company, • Exposure to high-volume retail rollouts, cosmetic displays, or interactive retail technology, • Leadership or mentorship experience within engineering teams is a plus, • Open to Engineer and Senior Engineer level candidates depending on experience, • Also interested in professionals with adjacent Project Management or Account Management experience within the industry, • Opportunity to work on nationally recognized retail and beauty brand programs under tight timelines and high visibility environments

Job DescriptionProviding Engineering and Manufacturing solutions since 1955, Triangle specializes in precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Develop and implement custom software solutions that drive business objectives through process automation and the synergies of interconnected systems. Work with cross-functional teams to solve operational challenges and translate business requirements into application design and features while providing the organization with a platform for making data-driven decisions. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Develop, implement, and support custom software applications., • Manage an application through the entire software development lifecycle., • Work cross-functionally with SME teams to develop processes and translate business requirements into application design and features., • Work strategically to automate internal processes and solve operational challenges that drive business objectives through technology., • Foster an environment of collaboration and continuous improvement by establishing feedback loops with internal customers and users., • Ensure solutions are performant, scalable and follow best practices., • Thoroughly test and debug applications including managing the software validation process., • Work with IT and others to promote technology within the organization and integrate with other systems as needed., • Continue to develop and enhance knowledge and proficiency in applicable technologies and platforms. Remain up to date on industry trends and best practices. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Bachelor's degree from a four-year college or university and 2-3 years of experience (depending on job-level), or an equivalent combination of education and experience. • Ability to read, write and speak English fluently., • Knowledge of at least one programming language and related frameworks/libraries (JavaScript, Python, Ruby, .NET, etc.), • Experience with software design and development., • Experience with data-driven applications and relational databases (SQL Server, MySQL, FileMaker, etc.), • Excellent communication and interpersonal skills to collaborate effectively with cross-functional teams., • Data-driven and curious, with a passion for problem solving and learning., • Detail-oriented and organized with the ability to multi-task and establish priorities in a fast-paced, changing environment.Desired, • Experience with modern web development tech stacks., • Experience developing dashboards and other BI tools., • Experience with ERP systems and ERP integrations., • Experience with Microsoft based development environments (.Net, SQL Server)., • Experience with FileMaker Pro., • Experience developing software in the manufacturing industry. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; sit; and use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms. Specific vision abilities required by this job include close vision, depth perception, and color vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually quiet and occasionally loud. Triangle does not sponsor for employment visa status. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR tGcoElLTvC

Job Description Sr Mechanical Controls Engineer - Remote Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5 -10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description About Voyant Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. Position Overview We're looking for a technically sharp intern who loves making complex technology accessible through great documentation and examples. You'll be the bridge between our cutting-edge LiDAR sensors and the developers who integrate them, turning our APIs into something customers love to work with. This role is up to ~60-70% technical writing and documentation infrastructure, with the remaining time spent building software demos and sample applications that showcase what's possible with our sensors. If you geek out over well-crafted docs and clear code examples, this is your role. Timeframe: This internship lasts 2 months with a minimum commitment of 40 hours per week, and there is potential to convert to a Part-time internship this fall or a full-time role. Location: NYC Responsibilities: Primary (~60-70% of time): * Write and maintain comprehensive API documentation for C++ and Python bindings * Create tutorials, quick-start guides, and integration examples that get developers up and running quickly * Build and maintain tooling to keep documentation synchronized with API and firmware updates * Manage documentation infrastructure and workflows (CI/CD, version control, publishing) * Ensure documentation clarity, accuracy, and completeness across all customer-facing materials Secondary (~30-40% of time): * Build sample applications and integration demos using our LiDAR sensors * Collect and curate example datasets that demonstrate sensor capabilities * Create ROS/ROS2 bridge usage examples and robotics framework integrations * Develop visual demos and code snippets for product marketing and customer onboarding Qualifications * Pursuing degree in Computer Science, Software Engineering, Robotics, or related technical field * Strong written communication skills with attention to clarity and detail * Programming experience in C++, Rust, and/or Python * Ability to understand and explain technical concepts to diverse audiences * Self-directed learner who can take ownership of documentation projects Preferred Qualification: * Familiarity with documentation tools (Sphinx, Doxygen, MkDocs, ReadTheDocs, etc.) * Experience with ROS/ROS2 or robotics frameworks * Prior technical writing, documentation, or developer relations experience * Understanding of API design principles and developer experience best practices * Basic scripting/automation skills for documentation tooling * Experience with version control (Git/GitHub) and CI/CD pipelines * Familiarity with LiDAR, point clouds, or sensor data What We Offer * Team events and company meetups * Complimentary lunch provided daily at our NYC office * Opportunity to contribute directly to the development of next-generation LiDAR products * Mentorship from senior hardware, photonics, and systems engineers * Hands-on experience with PCB design, mechanical prototyping, and test automation * Competitive compensation and potential for conversion to full-time Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Hit the Road, Solve Real-World Challenges, and Shape the Future of Industrial Solutions! This Jobot Job is hosted by: Robert Donohue Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $65,000 - $75,000 per year A bit about us: We are a global leader in industrial engineering solutions, supplying advanced plants, equipment, and services to industries such as hydropower, pulp & paper, metalworking, steel, solid/liquid separation, and biomass pelleting. With more than 29,000 employees across 280+ locations in over 40 countries, we deliver innovative technologies and unmatched field expertise to customers worldwide. As we continue to expand across the U.S., we’re seeking a Drafter to join our Southeast Region team. This is an exciting opportunity to work in a home-based, travel-focused role supporting customers on-site in paper mill environments. Why join us? • Global Reach, Local Impact: Work for a worldwide technology leader while making a direct difference to customers in your region., • Competitive Pay & Benefits: Comprehensive package, including health, travel expenses, and training., • Career Growth: Gain exposure to cutting-edge industrial solutions and develop in-demand technical and customer-facing skills., • Field-Based Flexibility: Home-based role with extensive travel (approx. 90%) throughout the Southern U.S., • Innovative Culture: Be part of a forward-thinking organization focused on continuous improvement, safety, and sustainability. Job Details Position: Field Note Engineer Location: Home-Based / Southeast Region, USA (90% travel by car and air) The Drafter - (Field Measurement) will play a critical role as the bridge between the field, customers, and engineering teams. This position focuses on on-site field data collection, equipment inspections, technical sketches, and customer support for industrial doctoring equipment in the paper industry. Key Responsibilities: • Conduct on-site inspections and audits during paper machine shutdowns and prepare detailed reports., • Sketch and digitize field measurements for new equipment and spare parts quotes., • Provide service, maintenance, and install supervision for doctoring equipment., • Work closely with local sales teams to identify and communicate sales opportunities., • Troubleshoot customer equipment issues and help implement effective solutions., • Collaborate via phone, email, and TEAMS to share field data and resolve technical challenges., • Maintain accurate databases of equipment, blades, and nozzles and submit brief call reports after each mill visit., • Manage travel schedules and expense budgets within company guidelines., • Previous maintenance or field experience in the paper industry or related industrial sectors preferred., • Strong mechanical aptitude and ability to hand-draw dimensional sketches., • Familiarity with technical prints and CAD software (SolidWorks)., • Skilled in Microsoft Office (Outlook, Word, Excel, Teams) and effective verbal/written communication., • Highly organized with excellent planning, problem-solving, and analytical skills., • Must hold a valid driver’s license and passport and be willing to travel extensively (approx. 90%)., • Ability to work in manufacturing environments with varying conditions (heat, noise, dust, etc.) while wearing appropriate PPE. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Associate Practice Area Director - Healthcare Design As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical buildings and the systems that bring them to life. We are currently seeking a performance-driven, highly motivated leader to collaborate with our national life science and Healthcare leadership team with the opportunity to grow into and oversee this practice area in the region (located in northeast or west region offices). This is an exciting opportunity to leverage our well-established legacy and brand with existing clients and innovative projects. We are looking for this candidate in our headquarters in New York City, New York. In this high-level role, you will lead the efforts to pursue, win and execute healthcare projects including in-patient hospitals, ambulatory surgery centers, behavior health facilities, medical office building and other facilities. You will provide management review and oversee our regional life sciences team including development of business plans, target pursuits and execute a wide variety of life science projects, organizational structures, and processes. This role will report to the Region leader for the firm. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. As a management owned private entity, we seek to reward our key leaders with ownership opportunities to drive overall performance and recognition. Job Responsibilities As an Associate Practice Area Director, you will oversee and expand on existing staff, coordinate the execution of healthcare activities in your region and maintain client satisfaction. You will generate new revenue and increase existing revenue streams within the Healthcare Market Focus. You will stay externally focused on developing and deepening your network of prospective clients and business partners, including owners, architects and PM/CM firms, as well as key general contractors. Track leads for major pursuits, forecast a pipeline of projects and develop winning strategies and teams. Additional responsibilities: • Stay abreast of the market both regionally and nationally and keep key team members at the technical forefront of this practice area, • Develop an appropriate network within the company to facilitate identification and sharing of relevant information between our national team for staffing and project pursuits, • Focus on ensuring technical excellence of project delivery and providing expert resolution of issues, • Develop, review and coordinate the regional practice area business plan in conjunction with the national life science and Healthcare plan including coordinating the business plan with other practice areas, geographies, and services, • Demonstrate a knowledge of OSHPD, • Demonstrate a knowledge of Design/Build proposals and contracts, • Coordinate goals with other members of the national team to help execute business plan, • Develop strategies and tactics to explore and penetrate new clients to increase national sales and higher margin work, • Oversee project financials and interoffice / client reporting structure, • Work towards revenue generation goal of $1 million to $3 million (annual average for two years), • Develop and articulate the firm's value proposition in the market segment to develop market distinction, • Lead and/or support sales presentations while focusing on selling integrated services, • Be an active leader and problem solver guiding our team and our partners to successfully deliver exceptional Life Science projects, • Write articles, white papers and speak at industry conferences and events The ideal candidate will possess the necessary leadership skills to oversee all efforts for clients, demonstrating an understanding of owner / client big picture business strategies and revenue goals, as well as the ability to foresee challenges. To succeed in this role, your technical expertise must be complemented by self-motivation, relationship building skills, effective communication skills, and the ability to effectively work in a fast–paced environment. The ideal candidate will be a recognized expert in the Life Science and Healthcare market focus within the industry. Additional requirements: • Bachelor's Degree in Electrical or Mechanical Engineering; exceptional candidates may substitute significant years of experience, • 15+ years of Life Science design experience, preferably minimum of 5 years in consulting engineering or A/E firm, • Minimum of 7 years of management experience, • 7+ years' experience in developing business for engineering, • Thorough knowledge of MEP systems, • PE registration highly desired, • Effective team player with the ability to work independently or in a team environment As an Associate Practice Area Director with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range$120,150—$180,226 USD

Job DescriptionJob Description We are seeking an experienced and technically skilled Senior Field Service Technician to support our Building Automation and HVAC Control Systems in the Elizabeth, New Jersey area. In this role, you will report directly to the Field Service Manager and play a key role in delivering high-quality service, technical support, and system optimization for our customer sites. You will work independently and as a technical leader within the team, providing advanced troubleshooting, programming, and commissioning support for complex building systems. Responsibilities Key Responsibilities • Provide expert-level service and support for building automation systems (BAS) and HVAC control systems, ensuring optimal performance and uptime., • Program, troubleshoot, and maintain EBI (Enterprise Buildings Integrator) front-end systems and CPO (Custom Programmable Output) DDC controllers., • Perform server patching, schedule and manage system backups, and carry out controller-level diagnostics and updates., • Serve as a technical resource and mentor for junior technicians, assisting with complex field issues and training as needed., • Interface directly with customers to assess system issues, recommend solutions, and ensure satisfaction with service delivery., • Perform diagnostics, commissioning, and system upgrades for BAS/HVAC systems across multiple customer sites., • Maintain accurate documentation of service activities, system updates, and site-specific configurations. Qualifications The annual base salary range for this position is $62,400-$78,000 . Please note that this salary information serves as a general guideline. Honeywell considers various factors when extending an offer, including but not limited to the scope and responsibilities of the position, the candidate's work experience, education and training, key skills, as well as market and business considerations. In addition to a performance-driven salary, cutting-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: he application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Posted March 23, 2026 Must Have • Minimum 5+ years of hands-on field experience in building automation and HVAC control systems., • Strong working knowledge of Honeywell EBI, CPO DDC controllers, or similar BAS platforms., • Proficient in BACnet and Modbus protocols for device programming, integration, and diagnostics., • Experience in server maintenance, including patching, backups, and cybersecurity best practices., • Deep understanding of HVAC mechanical systems and their interaction with automation controls., • Excellent problem-solving and technical troubleshooting skills., • Ability to read and interpret control schematics, wiring diagrams, and mechanical plans., • Strong communication skills and a customer-first mindset. We Value • Associate's or Bachelor's degree in Building Automation, HVAC Technology, Electrical Engineering, or a related field., • Certifications in BAS platforms (e.g., Honeywell, Tridium, Siemens, etc.)., • Experience mentoring or training junior technicians., • Strong time management and ability to work independently across multiple sites., • Experience in mechanical system operation and design, particularly HVAC systems., • Ability to lead by example and represent the company professionally in customer environments., • A proactive approach to preventive maintenance, system optimization, and continuous improvement. Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high-growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here THE BUSINESS UNIT Honeywell Building Automation (BA) is a leading global provider of products, software, solutions, and technologies that enable building owners and occupants to ensure their facilities are safe, energy efficient, sustainable, and productive. BA products and services include advanced software applications for building control and optimization; sensors, switches, control systems, and instruments for energy management; access control; video surveillance; fire products; and installation, maintenance, and upgrades of systems. Revenues in 2022 for BA were $6B and there are approximately 18,000 employees globally. To learn more, please visit click here . About Us Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable.

Join Ecolab as a Corporate Account Manager, Microelectronics – Global High Tech within our Nalco Water division, delivering comprehensive programs and solutions to meet the needs of customers across the Microelectronics market segment. As a Corporate Account Manager, you will be tasked with building a robust understanding of our customers’ businesses, microelectronics industry trends and navigating/managing strategic agreements. You will be responsible for all enterprise revenue generating activities, including driving and owning sales opportunities/processes, executive communications and presentations, and implementing value added customer solutions within your assigned corporate account portfolio(s). What’s in it For You: • You’ll join a growth company offering a competitive base salary, bonus structure and benefits, • A company vehicle and cell phone, • A long term, advancing career path in service, sales or management, • Access to the industry’s most innovative training programs, • Support from a dedicated technical service team, • A culture that values safety first, including training and personal protection, • Develop and expand existing and new national accounts in a designated industry segment, • Design and implement strategic business plans for national accounts, • Present value-add products and programs, highlighting impact to the customer’s business, • Ensure customer service delivery emphasizing the delivery of Nalco Water’s value proposition, • Build and secure major new business accounts at the corporate level, • Location is flexible but needs to be near a major US airport and we are ideally looking for someone located in the Northeast or Midwest, • Targeted accounts are within the Semiconductor industry, • 40% overnight travel required As a trusted partner, your customers will rely on you for their success. Nalco Water is committed to seeing you succeed and provides innovative training programs to ensure you’re prepared to solve any customer problem. Training programs are held in the field and at Nalco Water Headquarters in Naperville, IL; travel is arranged and paid for by Nalco Water. Based on your skill level and experience, topics covered may include technology, product, service, business and industry acumen, direct coaching and mentoring, sales management and leadership, classroom training and certifications. Minimum Qualifications: • Bachelor's degree, • 5 years of technical sales experience, • Immigration sponsorship is not available for this role, • Industrial water treatment experience Preferred Qualifications: • Bachelor’s degree in engineering (chemical, mechanical, industrial) or life sciences (biology, chemistry, etc.), • Demonstrated large account management success is in selected industry with executive-level relationship sales experience About Nalco Water: In a world with increasing water shortage and contamination challenges, Nalco Water, an Ecolab company, helps customers conserve more than 161 billion gallons of water each year. We work with customers across the world in the light industry (institutional, food & beverage, transportation and manufacturing), heavy industry (chemical, power and primary metals industries), paper and mining operations to reduce, reuse, and recycle their water while protecting their systems and equipment. Nalco Water provides the unique opportunity to work with a broad suite of technologies to deliver automated monitoring systems, data analysis and deep technical expertise to increase efficiency, sustainability and performance for our customers. Annual or Hourly Compensation Range The total Compensation range for this position is $142,100-$213,200 which includes base pay and target incentive based on performance, per plan terms. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. Click here to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: • Undergo additional background screens and/or drug/alcohol testing for customer credentialing., • Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging \nAt Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. \n In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). \n We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

Job Description: Saab, Inc. in East Syracuse, NY is seeking an experienced Senior Assembler to join the Manufacturing and Production team. Responsibilities include: \n • Work from wire diagrams, engineering drawings (blueprints), sketches, and written or oral instructions to create initial layouts and accurately assemble products.\n, • Use hand and power tools as required to complete assemblies.\n, • Disassemble, modify, rework, and reassemble production or prototype assemblies and subassemblies according to specifications.\n, • Apply advanced electrical and mechanical assembly concepts to resolve complex issues and support company objectives.\n, • Understand and apply ESD principles and safeguarding requirements.\n, • Properly use hand tools such as torque wrenches, wire cutters, strippers, and crimpers.\n, • Independently identify and resolve assigned tasks.\n, • Operate equipment including fork trucks, automotive lifts, ladders, lifting platforms, and cranes.\n, • May require limited travel, up to 10% annually.\n\n Compensation Range: $23.51 - $28.17/hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: \n • High School Diploma or equivalent.\n, • 4+ years of relevant assembly or manufacturing experience.\n, • Ability to read and interpret work instructions and assembly drawings.\n, • Ability to work with materials ranging from small, intricate components to larger, heavier parts.\n\n Desired Qualifications: \n • Experience working on manufacturing flow lines with multiple team members.\n, • Background in automotive mechanics or a related field.\n, • Comfortable operating automated equipment with an understanding of mechanical assembly and process flow.\n, • Experience that may include advanced support skills and extensive knowledge of tools, software, and related technologies.\n\n Physical Requirements: \n • Ability to lift up to 50 pounds.\n, • Ability to climb stairs to elevated tower platforms.\n, • Ability to stand and walk for extended periods.\n, • Ability to work outdoors as required.\n\n Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: \n • Medical, vision, and dental insurance for employees and dependents\n, • Generous paid time off, including 8 designated holidays\n, • 401(k) with employer contributions\n, • Tuition assistance and student loan assistance\n, • Wellness and employee assistance resources\n, • Employee stock purchase opportunities\n, • Short-term and long-term disability coverage\n\n About Us: Saab is a leading defense and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in ten U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! Staff Designer, MCAD Position Profile: The Staff Designer (CAD Designer) provides computer aided design and technical drawing support for new product research and development, including derivatives of our existing product lines under the direction of design engineers the designer shall be capable of interpreting industry design and drafting standards, military specifications and company internal procedures. Minimum Required Qualifications: • Associates degree, Mechanical engineering technology degree or Electrical technology degree, • 6-10 years' experience working as an electro-mechanical designer, • Experience with PTC Technology at least Creo 4.0 and Windchill 12.0, • Experience in mechanical design, material properties, fits and finishes, geometric tolerancing (GD&T) is required, • Strong PTC CREO CAD solid modeling experience and understanding of mechanical design principle, • Demonstrated strong knowledge of separating operations such as turning, milling, drilling, boring and tapping metallic and polymer materials, • Knowledge of fluid components, including sealing element designs, bearings and other mechanical elements, electro- mechanical packaging, PCB design, harness design a plus., • Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, • Highly computer literate, with MS Office/PC expertise, and demonstrated experience with applicable systems, programs, equipment, etc., • Must be a US Citizen Essential or Primary / Key Responsibilities: • Prepare detailed 3D design layouts of complex parts and assemblies, including fits, finishes, tolerances and materials selection, as requested by the project engineer., • Prepare simple design layouts of parts and assemblies, including fits and tolerances as requested by the project engineer or higher level designers, • Prepare detailed manufacturing documentation of parts and assemblies in accordance with all company and industry standards, including a thorough tolerance stack-up to prove out design intent for fit and function., • Support the creation of a standard library of parts and features for re-use later to support the department's needs., • Maintain existing documentation through the preparation and incorporation of ECN's and AECN's, • Effectively interprets industry design and drafting standards, military specifications and company internal procedures, • Participate in selected PDR and CDR reviews to help present design parameters., • Must be capable of performing basic trigonometry and solid geometry calculations., • Detail checking of assemblies and drawings to company standards. Including redraws., • Must be knowledgeable in the practical application of Geometric tolerances (GTOL)., • Prepare fully annotated drawings of parts and assemblies from 3D Assembly models., • Responsible for utilizing existing Marotta hardware for new designs/redesigns. This would include detail searches using Marotta's business system and custom software., • Own projects from concept through production in an integrated and product development professional team environment, • Analyze designs and determine opportunities for design improvements., • Work with engineers to develop and evaluate the feasibility of designs., • Analyze and apply tolerances on parts in a way that satisfies the design needs while satisfying manufacturing and inspection.(GD&T certificates preferred), • Create as-built drawing package with a high level of efficiency, • Conduct research as needed, • Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required)., • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to all regulatory and internal system requirements., • Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization, • Actively participate in team meetings, improvement initiatives/programs, etc. and support actions to drive company initiatives/goals, • Assist in the training of personnel to perform required technical tasks (as directed), • Consistently demonstrate commitment to company values, • While performing the duties of this job, the employee is regularly required to talk and hear, • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • The employee is regularly required to stand, sit, walk, stoop, or crouch, and move about the facility, • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Days and hours of work are 8 hours/day (Monday through Friday). Overtime and weekend could be required as job duties demand., • No travel is expected for this position We offer a highly competitive compensation package for this outstanding position plus a quarterly bonus along with a full range of top quality benefits and employee services including: medical, prescription, dental, vision, life and disability income insurance programs, 401k retirement plans with company match, generous tuition aid program, paid vacation, sick and personal days, paid holidays and flexible work hours with compressed work week options. We recognize and reward our employee's accomplishments and host several employee engagement events per quarter. This position is at our Parsippany, NJ office location. Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at We are an Affirmative Action and Equal Opportunity employer M/F/IWD/Veterans VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $95,000 - $110,000 per year

As the industry leader in water technology, we’re growing and need talented people like you to help us continue to protect the world’s most vital resource. Nalco Water, an Ecolab Company, seeks an Account Manager to join its industry leading sales team. You’ll be responsible for revenue and profit growth of programs and services in targeted accounts. Using a consultative sales approach, you’ll build relationships with existing customers by executing system assurance programs that meet their key business needs. With strong account leadership, you’ll also convert strategic competitive accounts and sell new technologies to current customers. What’s in it For You: * The opportunity to take on some of the world’s most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments * The ability to make an impact with a company that is passionate about your career development * Paid training held in the field and at Nalco Water Headquarters in Naperville, IL * Enjoy a flexible, independent work environment * Receive a non-decaled company vehicle for business and personal use * Comprehensive benefits package starting day 1 of employment – medical, dental, vision, matching 401(k), company paid pension, stock purchase plan, tuition reimbursement and more! What You Will Do: * Execute strong team leadership by coaching and training other District Reps, championing corporate initiatives, and by planning and leading portions of District Meetings * Generate and execute sales plans and strategies to close new opportunities within existing customer base, and in major, competitively-held accounts, to meet defined territory profit increase goals. * Work closely with large, strategic current and prospective customers to understand business needs and recommend continuous improvement and innovation plans that will maintain and grow sales within assigned territory * Develop strong relationships with key stakeholders within current and prospective customers, including plant or facility executives * Engage in problem solving by performing system analysis, interpreting data and providing written recommendations to ensure customer operations are performing at optimal levels * Demonstrate the ability to stabilize jeopardy business in large, strategic accounts Position Details: * This position is based in New York City / New Jersey * Territory covers about a 30 mile radius of the surrounding area * Targeted accounts are within the Healthcare, Commercial and Education industries * <5% overnight travel required As a trusted partner, your customers will rely on you for their success. Nalco Water is committed to seeing you succeed and provides innovative training programs to ensure you’re prepared to solve any customer problem. Training programs are held in the field and at Nalco Water Headquarters in Naperville, IL; travel is arranged and paid for by Nalco Water. Based on your skill level and experience, topics covered may include technology, product, service, business and industry acumen, direct coaching and mentoring, sales management and leadership, classroom training and certifications. If applicable, relocation assistance would be provided for the right candidate> Minimum Qualifications: * Bachelor's degree * 5 years of technical sales or field sales support experience * Position requires a current and valid driver's license * Immigration sponsorship is not available for this role Physical Requirements: * Drive a company vehicle as required to perform job duties (pre-employment and ongoing motor vehicle record checks will be performed to determine eligibility to drive a company vehicle) * Ability to perform essential functions of the job, with or without reasonable accommodation Preferred Qualifications: * Bachelor’s degree in engineering (chemical, mechanical, industrial) or life sciences (biology, chemistry, etc.) * Water treatment or specialty chemical industry experience * Working knowledge of OR operations> About Nalco Water: In a world with increasing water shortage and contamination challenges, Nalco Water, an Ecolab company, helps customers conserve more than 161 billion gallons of water each year. We work with customers across the world in the light industry (institutional, food & beverage, manufacturing, transportation, textile care, and global high tech) and heavy industry (chemical, downstream, paper, mining, power and primary metals industries) to reduce, reuse, and recycle their water while protecting their systems and equipment. Nalco Water provides the unique opportunity to work with a broad suite of technologies to deliver automated monitoring systems, data analysis and deep technical expertise to increase efficiency, sustainability and performance for our customers. Annual or Hourly Compensation Range The total Compensation range for this position is $118,600-$177,800 which includes base pay and target incentive based on performance, per plan terms. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. Click here to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: • Undergo additional background screens and/or drug/alcohol testing for customer credentialing., • Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging \nAt Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. \n In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). \n We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! Assembly & Test Technician III About the Role As a Technician on our production team, you'll play a critical role in assembling, testing, and repairing electro-mechanical control systems used in Aerospace & Defense applications. Working in our state-of-the-art, climate-controlled manufacturing facility, you'll collaborate with production and engineering teams to meet quality and delivery goals while supporting some of the industry's most advanced platforms. We'll also provide the opportunity to complete on-site solder training to expand your skillset and prepare you for broader career growth. What You'll Do • Assemble, test, and troubleshoot electro-mechanical actuation systems and subassemblies., • Read and interpret technical documents, schematics, and drawings., • Conduct work in compliance with mil-specs, customer specifications, and regulatory standards., • Operate and maintain electronic instruments, test equipment, and precision tools., • Diagnose causes of test failures, rework units, and recommend corrective actions., • Support equipment maintenance and ensure all hand tools remain in clean working order., • Document work accurately, track parts usage, and maintain test data., • High School Diploma (minimum); A.A.S. in Electronic Engineering Technology preferred., • 5+ years of experience in a manufacturing/testing environment (less experience considered with a recent A.A.S. degree)., • Strong background in CCA testing and debugging (required)., • Hands-on experience with electro-mechanical product measurement and testing., • Proficiency with a variety of electronic test equipment., • Knowledge of Lean concepts, ESD/FOD controls, and PPE., • Strong communication skills and ability to collaborate across teams., • Proficiency in Microsoft Office and basic PC skills., • Modern heated & air-conditioned facility., • Exposure to a shop floor environment (fluids, fumes, moving parts, vibration, etc.)., • Use of PPE as required (eye, hearing, and foot protection)., • Regular standing, sitting, walking, bending, and reaching., • Ability to lift/move up to 45 lbs., • Strong manual dexterity and vision requirements (close, distance, peripheral, depth perception). Pay Range: $30 - $39 per hour This position is at our Parsippany, NJ office location. Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $30 - $34 per hour

As the industry leader in water technology, we’re growing and need talented people like you to help us continue to protect the world’s most vital resource. Nalco Water, an Ecolab Company, seeks a Technical Sales Representative to join its industry leading sales team. You’ll be responsible for revenue and profit growth of programs and services in targeted accounts. Using a consultative sales approach, you’ll build relationships with existing customers by executing system assurance programs that meet their key business needs. With strong account leadership, you’ll also convert strategic competitive accounts and sell new technologies to current customers. What’s in it For You: * You’ll join a growth company offering a competitive base salary, bonus structure and benefits * A company vehicle and cell phone * A long term, advancing career path in service, sales or management * Access to the industry’s most innovative training programs * Support from a dedicated technical service team * A culture that values safety first, including training and personal protection * Pride in working for a company that provides clean water, safe food, abundant energy and healthy environments What You Will Do: * Generate and execute sales plans in existing customer base and in assigned competitively-held accounts, to meet profit increase goals. * Work closely with current and prospective customers to understand business needs and recommend continuous improvement and innovation plans that will maintain and grow sales * Develop strong relationships with key stakeholders in current and prospective customers, including plant or facility executives * Provide technical support to customers; identifying and resolving customer challenges, escalating as required * Engage in problem solving by performing system analysis, interpreting data and providing written recommendations to ensure customer operations are performing at optimal levels. * Actively sell and support Nalco Water innovations and technology in assigned customers to promote long-term business relationships with Nalco Water Territory/Location Information: * This position is based in New York, NY * Territory covers about a 25 mile radius of the surrounding area * Targeted accounts are within the Institutional industries * <25% overnight travel required As a trusted partner, your customers will rely on you for their success. Nalco Water is committed to seeing you succeed and provides innovative training programs to ensure you’re prepared to solve any customer problem. Training programs are held in the field and at Nalco Water Headquarters in Naperville, IL; travel is arranged and paid for by Nalco Water. Based on your skill level and experience, topics covered may include technology, product, service, business and industry acumen, direct coaching and mentoring, sales management and leadership, classroom training and certifications. Minimum Qualifications: * Bachelor's degree * Technical sales or field sales support experience * Possess a valid Driver's License and acceptable Motor Vehicle Record * Immigration sponsorship is not available for this role Preferred Qualifications: * Bachelor’s degree in engineering (chemical, mechanical, industrial) or life sciences (biology, chemistry, etc.) * Water treatment or specialty chemical industry experience * Working knowledge of OR operations, wet end chemistry, pulp mill operations> About Nalco Water: In a world with increasing water shortage and contamination challenges, Nalco Water, an Ecolab company, helps customers conserve more than 161 billion gallons of water each year. We work with customers across the world in the light industry (institutional, food & beverage, transportation and manufacturing), heavy industry (chemical, power and primary metals industries), paper and mining operations to reduce, reuse, and recycle their water while protecting their systems and equipment. Nalco Water provides the unique opportunity to work with a broad suite of technologies to deliver automated monitoring systems, data analysis and deep technical expertise to increase efficiency, sustainability and performance for our customers. Annual or Hourly Compensation Range The total Compensation range for this position is $81,200-$121,700 which includes base pay and target incentive based on performance, per plan terms. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. Click here to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: • Undergo additional background screens and/or drug/alcohol testing for customer credentialing., • Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging \nAt Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. \n In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). \n We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

Job DescriptionJoin the team at New Jersey’s largest wine and spirits distributor! At Allied Beverage Group, we’re proud of our dynamic, family-based culture and our role in keeping the beverage industry moving. If you're looking for a great company with great people—this is the place to be! Overview The Operations Supervisor is a key leader position in the distribution and operations organization reporting directly to the Operations Manager. Requires strong interpersonal and communication skills as well as knowledge of warehouse operations Preference for warehouse automation experience is a plus but not required. The Operations Supervisor leads day to day operations and personnel, ensuring the highest level of customer service to customers. Leads union and non-union employees and enjoys building a team.Responsibilities • Planning- Ability to identify and plan for staffing requirements based on knowledge of warehousing and distribution operations. Make decisions based on experience and operations planning . Ensures that procedures and processes match requirements of the operation. Capability to train and implement new technology and processes while maintaining productivity., • Building an inclusive culture– Individual and collective accountability, reward and recognition programs, communication designed to frontline employees and build a desirable place to work., • Continuous Improvement- Development and implementation of performance-based metrics in order to drive results through continuous improvement programs such as lean six sigma., • Collaboration - Partnering with night and day operations managers, delivery, and maintenance functions to identify areas of opportunities for improvements to fill rate, throughput, and reduction of cost., • Execution– Ability to execute plans and get results through others and identification of gaps and opportunities. Looks for ways to improve day to day workflow., • Safety- Provide safety instruction to personnel as needed. Report all work-related injuries immediately. Provide immediate medical attention to injured employees as necessary. Ensure compliance with appropriate government regulations.Qualifications, • Relevant Bachelor’s degree or equivalent (Logistics Management, Mechanical Engineering, or Business Management), • 3-5 years of direct supervisor level experience within a distribution environment, • 3+ years Operations management experience, • Supply Chain supervisory experience, • Functional system understanding in WMS, Microsoft Office, Excel, PowerPoint, • Ability to work non-traditional business hours including evenings, nights and weekends when required, • 20% In-state travel requirement, • Strong Communication skills – verbal, presentation, writing, • Preferred: Warehouse automation experience Physical Requirements, • 9-10 hours, 5 days a week, ability to work across multiple shifts The Company is dedicated to ensuring a safe and secure environment for our team members and visitors. To assist in achieving that goal, we conduct a drug and background check for all new team members post-offer and prior to the start of employment. The Immigration Reform and Control Act requires that verification of employment eligibility be documented for all new employees by the end of the third day of work. Allied Beverage Group participates in the E-Verify program to confirm employment eligibility of all new hires in the United States. EEO and AI Disclosure Statement Allied Beverage Group is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information, or any other legally protected characteristics. As part of our recruitment process, Allied Beverage Group uses artificial intelligence (AI) tools to support the initial review of applications. These tools are designed to assist our recruiters in identifying qualifications and experience that align with the requirements of each role. The tools do not make hiring decisions. All final decisions are made by our recruitment team and hiring managers. We are committed to fair and equitable hiring practices. If you have questions about this process or need an accommodation, please contact Human Resources. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.