Plc jobs in Orange, New JerseyCreate job alerts

Job Description Job Title: Facilities Maintenance Technician - Building Engineer Location: Newark. NJ Pay: $34/hr Type of Placement: Direct Hire Shift: Must be open to start Job Description The Facilities Maintenance Technician will be responsible for the daily maintenance and repair of building facilities. This includes work on elevators, conveyor systems, mechanical systems, lighting systems, communication/radio systems, air handling/HVAC units, fire systems, plumbing systems, and more. Technicians may also work with PLC electronic systems, computer controls, and steel frame structures. Responsibilities • Perform maintenance and repair tasks on various building facilities including elevators, conveyor systems, and HVAC units., • Work with communication and radio systems, fire systems, and plumbing systems., • Engage in high and low voltage electrical repairs, including installation and repair of 110/220/480 volt single and multiphase electrical circuitry., • Read and follow wiring schematics for industrial wiring tasks., • Thorough knowledge of general building maintenance with an emphasis on electrical systems., • Experience in electrical troubleshooting including AC & DC circuits and high voltage (480) repairs., • Experience in industrial maintenance, electrical maintenance, and preventive maintenance., • Ability to read and follow wiring schematics., • Experience in electronics diagnostics and troubleshooting., • Valid, clean, applicable state driver's license. Enjoy a $10,000 sign-on bonus with half paid after 30 days and the other half after 12 months. Benefit from yearly pay increases, reaching up to $60.00 an hour after 8 years. Experience extremely competitive benefits. Work Environment The work environment includes both indoor and outdoor settings at airport terminals. Be prepared to work on a flexible schedule that covers all shifts, including weekends and holidays. Schedules are bid and awarded based on seniority. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $71802.00 - $71802.00/yr. We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). See attached SOP. Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on May 12, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what’s next. Let’s define tomorrow, together. At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. • Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment, • Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision, • Journeyman electrical license a plus, • Requires the ability to make low and high voltage repairs to all building electrical equipment, • This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices, • You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors, • Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions, • Schedules are bid and awarded according to seniority, • Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT), • Salary increases will be administered according to the current IBT/United contract, • New employees are required to join the union within ninety (90) days of employment, • Twenty Four months experience required in at least three of the following areas:, • Electrical (including 480 volt, 3 phase), • Structural (including steel frame construction), • HVAC (including building management systems), • Mechanical (including conveyors), • Plumbing, • PLC electronic/computer controls, • Must have completed high school diploma, GED or equivalent, • Ability to maintain and repair all building disciplines, heavy mechanical and welding, • Work may be indoors or outside or in elevated areas anywhere on airport, • Must be able to climb and work from ladders, and/or walk for extended periods, • Moderate lifting, • Must possess sufficient tooling to perform required tasks, • Computer experience for input and retrieval of data, • Qualified candidates must be immediately available for full time employment, • Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: • Electronics diagnostics and troubleshooting The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an Equal Opportunity Employer. We recruit, employ, train, compensate, and promote without regard to race, color, religion, national origin, gender identity, sexual orientation, disability, age, veteran status, or any other protected category under applicable law. We provide reasonable accommodations for applicants and employees with disabilities. To request an accommodation, contact ___

Job Description General Description: Troubleshoot and repair electrical machinery using VOM and schematics, Wire electrical enclosures, motors, PLC terminals, and electrical devices using a VOM and schematic. Perform basic PLC program and troubleshooting. Reports to: Production Manager / Maintenance Eng. Responsibilities: • Maintain the electrical in the building and presses., • Read and understand electrical schematics and blueprints, • Wiring equipment, • Experience in A/C 120/208/470 Volts, • Experience with EMT tube bend and rigid pipe, • Electrical experience, • PLC experience, • Wiring and troubleshooting electric circuit per schematic Minimum Additional Training (If Applicable): • Company’s Quality Management System, • An ability to work well under pressure, • Good verbal and written communication skills, • Relevant technical knowledge, • Problem-solving skills, • Efficiency and organization, • Teamworking skills, • Preferred Spanish

Job Description HANDS ON ELECTRICAL TECHNICIAN. CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES/ PLC PROGRAMMING IS A PLUS. MUST HAVE ELECTRICAL HANDS ON EXPERIENCE. MUST BE CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES General Description: Develop and maintain facilities electrical infrastructure and equipment. Able to work safely and efficiently with high voltage equipment. Responsible for troubleshooting electrical problems throughout the plant. Supply power from Breaker Panel to equipment. Perform computer program modifications to existing PLC programs. Working knowledge of hydraulics helpful. Reports to: Maintenance Eng. Both English and Spanish speaking applicants will be considered. Responsibilities: • Maintain the electrical in the building and facility equipment., • Read and understand electrical schematics and blueprints, • Troubleshoot and wiring equipment, • Supervisor the Maintenance team Previous Experience: • Experience in A/C 120/208/470 Volts // EMT tube bend and rigid pipe, • Preferred Experience: Wiring electrical enclosures as per schematic given, • Preferred Experience: Computer programing of Allen Bradley PLC controllers Educational Qualifications: • Required: High School diploma, • Preferred: Electrical Technology or Engineering Degree, • Preferred: Electrical Certifications Company training will include • Company’s Quality Management System, • ISO 9001:2015 awareness Other Skills: • An ability to work well under pressure, • Teamwork and problem-solving skills, • Good verbal and written communication skills, • Efficiency and organization, • Able to speak Spanish helpful

Location(s): Kearny, NJ, US, 07032-4398 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68836 Hiring Manager: Hany Azmy HR Rep: Patricia Oltar SUMMARY The purpose of the Maintenance Planner is to perform as professional, highly skilled and exceptionally competent maintenance person in addition to handling the certification, training and management of contractors and all planned maintenance. This role handles the bid and planning process for project work. Participates in teams to develop and implement solutions. Principal Duties and Responsibilities: • Energy Control Procedures (ECP's) and Lock Tag Try (LTT) system. Respect for the potential hazards within the manufacturing operation. Training and regular auditing of the process., • Fluent in the language of the plant., • Computer literacy - email, simple spreadsheet, word doc., • Safe rigging procedures., • Forklift operation, licensed - will provide certification., • Confirm that all contractors have completed the proper safety compliance paperwork before a project begins., • Training and oversee contractors as they come on site to complete projects., • Work with the Reliability Leader and Controller on 901s for project completion., • PLC basics -- Ability to use laptop for troubleshooting and see what limit switch or photo eye isn't working and ability to adjust where needed. Internal various timers in the program; the ability to access status files to diagnose and clear PLC faults., • Troubleshooting basics, how to analyze a problem and step to the root cause. Help reduce cycle time to problem resolution and eliminates the "replace and see what happens method"., • Process 101 - Basic concepts of what it takes to consistently manufacture shingles. Critical product characteristics, key process variables, customer needs etc., • Business 101 - World Class Manufacturing (WCM) concepts, what are they, individual and business benefits. Key business metrics and focus., • Must have minimum two years of plant experience or have demonstrated capability and knowledge to trouble shoot major plant systems. (Filled coating sys, Slate sys, Poly wrap. Etc.), • Installs, modifies or maintains plant equipment and assists in determining appropriate methods to accomplish these tasks., • Must work safely and follow all documented and "common sense" safety polices and procedures., • Read, understand, and analyze blueprints and other technical data references., • Expert use of hand and power tools., • nInspects plant equipment to identify potential problems prior to breakdown occurrences., • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion., • Follows all environmental compliance polices & programs., • Machining bores, keyways, drill press, grinding; lathe and mill operation., • Ability to properly, precision align belt, gear or direct coupled shafts using proper tools to specified tolerances., • Understanding of lubrication principles and bearing tolerances and basic bearing "physics"-I.E. how does it work in terms of need for extreme care, keeping clean, etc., • Hydraulic systems understanding - hydraulic flow principles. Effects of pipe sizes and valves on pressure drops, making proper fittings per system requirements, proper valve application, etc. Applied to water systems, hot oil, and hydraulic systems., • Same as above for compressed air and steam, (where applicable) systems., • Understanding of pump basics and operating characteristics including effects of suction pressures, head pressures, sealing/packing techniques., • Ability to track conveyor belts properly and understanding the physics of belt operation and tracking including bucket elevators; belt splicing., • Ability to read air and power fluid schematics., • Basic welding for all; structural and piping welding for at least one craft per plant., • Pipefitting - alignment, flange, threading., • Basic electrical component "how they work" understanding: solenoids, motors, heaters, contacts, and photoeyes., • Basic industrial electrical code., • Capability to read schematics and P&ID drawings., • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC, DC and Servo drive system (basics)., • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc., • Ability to fully troubleshoot drives-DC and AC variable frequency, and communicate technically with outside technical support when needed., • Ability to fully understand the various control loops in the plant including IM/APC systems and weight control equipment., • Fully competent in electrical noise avoidance-grounding, shielding, etc., • Burner system understanding, troubleshooting and properly tuningComply with all plant rules, • Comply with safety regulations and maintain a clean and orderly work area, • All other duties as assigned or needed The employee should hold the following abilities: • Basic Computer Skills, • Electrical, • Basic PLC, • Hydraulic, • Pneumatics, • Basic Blueprint & Schematic reading, • Basic Welding, • Able to think under pressure and make quick decisions, • Ability to work well in a team or alone The employee must be able to: The employee should have the following: High School or equivalent Complete and pass Electrical CD Rom training provided by plant. • Preferably five (5) years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment., • Able to demonstrate trouble-shooting techniques and have a basic understanding of blueprints., • Basic ability and knowledge of welding practices and hydraulic circuitry., • Advanced understanding of electrical circuitry., • Basic PLC knowledge., • Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form., • Flair for working with large industrial machines. The employee should possess the ability to: • Able to do repetitive hand, arm, leg movements for several hours, • Able to climb on and off of fork truck, • Ability to stand for 10 - 12 hours straight, • Able to climb and descend stairs for up to 12 hours continuously, • Lift and push and pull 50lbs. More than 100 times per day, • Must be able to squat, bend at the waist and knees freely, • Exposure to temperature extremes, • Exposure to sounds or noise levels that maybe uncomfortable, • Bending and twisting, • Handle, control or feel objects, tools or control This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. About Owens Corning Owens Corning is a residential and commercial building products leader committed to building a sustainable future through material innovation. Our products provide durable, sustainable, energy-efficient solutions that leverage our unique capabilities and market-leading positions to help our customers win and grow. We are global in scope, human in scale with more than 25,000 employees in 31 countries dedicated to generating value for our customers and shareholders and making a difference in the communities where we work and live. Founded in 1938 and based in Toledo, Ohio, USA, Owens Corning posted 2024 sales of $11.0 billion. For more information, visit . Owens Corning is an equal opportunity employer. Except in limited circumstances such as formal apprenticeship programs, Owens Corning does not employ anyone under the age of 18.

Job Description Job Title: Electrical/Electronic Engineer II/III Location- Philadelphia, PA Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier provider of engineering and industrial services, proudly supporting the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other Department of Defense (DoD) organizations. We are committed to fostering a collaborative culture where every employee's voice is valued, and opportunities for growth and development abound. At Continental Tide, you'll thrive in a fast-paced, dynamic environment that encourages innovation, skill-building, and the pursuit of excellence. Join our team of dedicated experts who are passionate about delivering cutting-edge solutions to support our nation's fleet. We look forward to welcoming you aboard! Job Description: We are seeking a skilled Electrical/Computer Engineer to support critical ship system processes, design, and development for naval and maritime operations. This role involves providing technical expertise, conducting system assessments, and contributing to the design and testing of advanced electrical and electronic systems aboard Navy vessels. Key Responsibilities: \n • Provide support for process control equipment related to ship systems.\n, • Perform electric valve actuator assessments, training, and technical assistance for ship personnel during repair and testing.\n, • Participate in the design, development, or modification of new and existing Systems Engineering Processes (SEP) and Capability Maturity Model Integration (CMMI).\n, • Review of technical documentation related to all variants of fielded systems and future fielded systems. \n, • Provide design support for integration of equipment in an industrial/shipboard environment.\n, • Collaborate on solutions to enhance system performance and reliability.\n, • Provide software and hardware installation support.\n, • Troubleshoot complex problems of all systems. \n, • Support auxiliary systems including fuel and lube oil systems, pumps, heat exchangers, smart valves, life support and compressed air systems. \n, • Apply expertise in Human Machine Interface (HMI) and Programmable Logic Controller (PLC) applications to improve shipboard operations.\n\n Experience and Skills Qualifications: • B.S. Degree in Electrical or Computer Engineering from an accredited college or university.\n, • Minimum of 4 years of professional experience in electrical engineering. \n, • Minimum of 3 years of experience working with HMI and PLC applications. \n, • Extensive experience with auxiliary fluid support systems and a strong understanding of Navy programs, organizations, and functions.\n Skills and Attributes: \n • Strong analytical and problem-solving abilities.\n, • Knowledge of fundamental concepts, practices, and procedures with industrial control systems.\n, • Proficiency in reading electrical diagrams.\n, • Knowledge of network troubleshooting tools.\n, • Proficiency in the use of testing and diagnostic tools associated with industrial control systems.\n, • Proficiency in designing, modeling, and testing advanced systems.\n, • Excellent communication and technical documentation skills.\n, • Knowledge of naval systems and shipboard operations.\n\n This is an exciting opportunity to work on cutting-edge projects that enhance the operational readiness of Navy vessels. If you're a motivated engineer ready to contribute to mission-critical solutions, we encourage you to apply today. Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Benefits: Learn more about us: See all of our latest opportunities at or follow us on our LinkedIn page at:. To be considered you must apply by going to . Continental Tide is an Equal Opportunity Employer - minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity. Continental Tide participates in E-Verify and U.S. citizenship is required for most positions. "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Location(s): Kearny, NJ, US, 07032-4398 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68834 Hiring Manager: Hany Azmy HR Rep: Patricia Oltar SUMMARY The purpose of the Electrical Technician is assist in the installation and repair electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment. This role also provides maintenance repairs to industrial machinery as needed to keep a continuous manufacturing process supported. Uses man lifts, forklifts, hoists and all electrical testing equipment required. Must work safely and follow all documented and "common sense" safety policies and procedures. This individual is expected to perform as a professional, highly skilled and exceptionally competent maintenance person. They must be able to analyze causes of breakdowns and carry out corrective measures. Principal Duties and Responsibilities: • Notify your supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem., • Take personal ownership to work safely each and every day and hold other team members to the same high standards of safety, • Basic industrial electrical code. (local compliance issues), • Capability to read schematics and P&ID drawings, • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC, DC and Servo drive system (basics), • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc., • Ability to fully troubleshoot drives-DC and AC variable frequency, and communicate technically with outside technical support when needed. Ability to fully understand and properly tune the various control loops in the plant including IM/APC systems and weight control equipment. Fully competent in electrical noise avoidance-grounding, shielding, etc. (at least 2 persons, each plant), • Burner system understanding, troubleshooting and properly tuning (at least 2 persons, each plant), • Basic Skills, pneumatics, hydraulics, mechanical gear, • When appropriate or when plant decides lead efforts for electrical root cause analyzes Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion. Helps with electrical training of other maintenance personnel. Follows all environmental compliance polices & programs. Works as instructed with outside contractors. • Be a lead person for all electrical projects and installation that are maintenance responsibility., • Comply with all plant rules, • Comply with safety regulations and maintain a clean and orderly work area, • All other duties as assigned or needed The employee should hold the following abilities: • Basic Computer Skills, • Electrical, • PLC, • Hydraulic, • Pneumatics, • Basic Blueprint & Schematic reading, • Basic Welding, • Able to think under pressure and make quick decisions, • Ability to work well in a team or alone, • Able to communicate in English The employee must be able to: The employee should have the following: • High School Diploma or GED Equivalent, • High school or GED Preferably seven- (7) year's experience in related maintenance trade or occupation that involved electrical and electronic components in a manufacturing environment. Must have the ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form. Must be able to work independently with minimal direct supervision with drive toward accomplishment, and to produce high quality work. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT The employee should possess the ability to: • Able to do repetitive hand, arm, leg movements for several hours, • Able to climb on and off of fork truck, • Ability to stand for 10 - 12 hours straight, • Able to climb and descend stairs for up to 12 hours continuously, • Lift and push and pull 50lbs. More than 100 times per day, • Must be able to squat, bend at the waist and knees freely, • Exposure to temperature extremes, • Exposure to sounds or noise levels that maybe uncomfortable, • Handle, control or feel objects, tools or control--continously This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. About Owens Corning Owens Corning is a residential and commercial building products leader committed to building a sustainable future through material innovation. Our products provide durable, sustainable, energy-efficient solutions that leverage our unique capabilities and market-leading positions to help our customers win and grow. We are global in scope, human in scale with more than 25,000 employees in 31 countries dedicated to generating value for our customers and shareholders and making a difference in the communities where we work and live. Founded in 1938 and based in Toledo, Ohio, USA, Owens Corning posted 2024 sales of $11.0 billion. For more information, visit . Owens Corning is an equal opportunity employer. Except in limited circumstances such as formal apprenticeship programs, Owens Corning does not employ anyone under the age of 18.

Title: Non-Credit Instructor Department: Assoc Provost Continued Learning Of Reports To: Director, Custom Training Position Type: Staff Position Summary: LDI is seeking instructors with expertise in one or more of the following areas: Technology & Digital Skills: -Computer Science -Robotics and Automation -Coding and Computational Thinking -AI Literacy and Emerging Technologies -Cybersecurity Fundamentals Productivity & Business Tools: -Microsoft Excel from beginner through advanced -Data organization, reporting, and dashboards -Digital collaboration and workflow tools Industrial & Technical Operations: -Electro-Mechanical Maintenance Technician -Multi-Craft Maintenance Mechanic -Automation & PLC Technician -Maintenance Lead or Shift Supervisor Professional & Business Skills: -Data-driven decision making -Project management and Agile methods -Communication and workplace effectiveness -Leadership and change management -Financial literacy and business fundamentals Essential Functions: -Design and deliver customized, skills-based instruction aligned to client objectives and LDI's learning framework. -Develop course outlines, plans, and instructional materials for assigned engagements. -Deliver instruction in person and/or virtually, based on client requirements. -Use project-based, applied, and inquiry-driven teaching methods. -Collaborate with LDI staff and client stakeholders to ensure high-quality delivery. -Maintain clear and timely communication regarding scheduling, availability, and instructional needs. Prerequisite Qualifications: -Teaching, training, or facilitation experience with adult learners or working professionals. -Demonstrated expertise in Excel, Office Suite, data analysis, automation systems, PLCs, maintenance operations, AI tools, or business systems. -Demonstrated expertise in learning management systems and virtual conferencing platforms such as Zoom and Google Meet. -Strong communication and facilitation skills in both in-person and virtual environments. -Relevant certifications, degrees, or substantial professional experience in the subject area. -Equivalent combinations of education and professional experience may be considered. -At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate for this position is $45.00 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Instrumentation Controls Technician Location: Lyndhurst, NJ Schedule: Monday – Friday | 2:00 PM – 10:30 PM (2nd Shift) Pay: $35 – $40 per hour Are you the kind of person who can look at a control panel, hear a weird machine noise, and immediately start diagnosing the problem in your head? If PLCs, instrumentation, and troubleshooting industrial equipment are your thing, this could be a great fit. We are seeking an Instrumentation Controls Technician to support a busy manufacturing facility in Lyndhurst, NJ. In this role, you will work with plant systems, instrumentation, and control equipment to ensure operations run safely and efficiently. You will also help maintain calibration programs, troubleshoot automation issues, and support plant operations when technical challenges arise. If you enjoy solving technical problems and working hands-on with equipment and control systems, this is a strong opportunity with a company that values technical expertise. What You'll Do * Troubleshoot and maintain PLC and control systems supporting plant equipment * Maintain and repair instrumentation, sensors, and electrical systems * Analyze and test computer control systems based on system design specifications * Support machine operating systems and control programs * Perform instrument calibration and calibration documentation * Manage calibration schedules and maintain compliance with ISO 9000 requirements * Diagnose issues with labeling equipment and automated systems * Perform scheduled maintenance on electrical and electronic devices * Provide rotational weekend on-call support for plant operations when required What We're Looking For * Strong troubleshooting and analytical skills * Solid electrical and controls background * Experience with PLCs (Allen-Bradley preferred) * Experience with pneumatic and hydraulic systems * Ability to read technical drawings, P&IDs, and ladder logic diagrams * Experience performing instrument calibration * Strong communication skills and ability to work independently or on a team * Experience in industrial manufacturing environments such as chemical, pharmaceutical, or food processing is preferred * Technical school training or related degree preferred * Experience with CMMS systems and smart instruments is a plus Zing Recruiting is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, genetic information, or any other protected status under federal, state, or local law. We are committed to fostering a diverse and inclusive workplace. #ZINGZIP #ZINGNJ #LI-VD1 Company DescriptionZing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.Zing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance.

Job Description About Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. *This is not the official job application; this posting is specifically for CoreSite SkillBridge program. Please note that this program is exclusively for Military Spouse Fellows or Active-duty US military personnel transitioning out of the military to civilian workforce. SkillBridge Data Center Technician Role: The SkillBridge Data Center Technician assists in the operational integrity, security, and regulatory compliance of the data center. The technician will gain working knowledge of data center operations including telecommunications, mechanical, electrical, and fire life safety systems as well as data center operating procedures. The technician will be responsible for day-to-day operations of the data center including facilities and telecommunication infrastructure. The responsibilities are wide ranging and multi-disciplinary. Mechanical responsibilities will include working on chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, humidification systems, and central plant operations. Electrical responsibilities will include working on electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load including power circuit installations. Fire Life Safety responsibilities will include monitoring wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Telecommunications responsibilities will include cross connect installations, cabling infrastructure management, advanced remote hands support, and customer cage and cabinet build outs. Other responsibilities will include customer infrastructure build-outs (cage builds, overhead installations, rack and stack), cable termination and testing, maintenance work, monitoring and responding to mechanical, electrical, fire protection, telecom, and security systems. These systems include, transformers, PLC’s, generators, switchgear, UPS systems, STS’, ATS’ PDU’s, chilled water systems, CRAC/CRAH, wet sprinkler systems and pre-action sprinkler, network equipment, transmission media, cabling infrastructure, security hardware, and CCTV. Duties: • Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control., • Completion of CoreSite’s Data Center Operations Qualification Program., • Ensure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction as per Coresite guidelines., • Manage systems to avoid unplanned, customer-impacting outages., • Follow direction from data center management regarding the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiency., • Work with contractors and consultants for all system expansions, corrections and upgrades., • Work with the senior technicians to track and complete an aggressive preventive and predicative maintenance schedule., • Assist with the database management of maintenance discrepancies and work with to resolve site issues based on agreed upon priorities., • Trouble ticket and remote hands management., • Fiber and Copper cabling terminations., • Circuit path creation and verification., • Coordinate and oversee power installations and upgrades., • Complete work orders., • Infrastructure projects including cage and cabinet build-outs, overhead installations, and rack and stack., • Navigate and utilize a CMMS system., • Use developed procedures to solve problems., • Assist in asset and consumable inventory management., • Tracking and trending operational characteristics., • Tracking and proper labeling of all equipment per established procedures., • Provide day-to-day exceptional customer service and support., • Incident escalation, response, and follow-up report writing., • Maintain and complete regular facility and security tours documenting and responding to found issues., • Manage building service requests through resolution., • Perform and complete work orders and customer service tickets in a timely manner., • Provide applied mechanical and integrated control expertise for the entire data center., • Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities., • Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and Core Values. Requirements Knowledge, Skills, and Abilities: Interaction with Others -This position is required to interact with CoreSite personnel, vendors, partners, contractors and clients. Work Attributes: Knowledge- • Firm and proven understanding of the electrical and mechanical systems used in a data center environment., • Firm and proven understanding of fiber optics / cabling infrastructure and industry best practices., • Firm and proven understanding of Proficient knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safety., • Proficient knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)., • Proficient and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems. Skills- • Minimum of 2 years experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including:, • Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, Double Interlock Pre-Action Systems, Communications cabling, Cabling infrastructure, Network infrastructure and hardware., • Experience laying out, pulling, dressing, and terminating fiber and copper communications cabling., • Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling., • Proven leadership skills, • Excellent communication skills, both written and oral, • Proficient with Microsoft Office (Word, Excel, PowerPoint) Abilities - • Ability to communicate effectively with customers and internal staff., • Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems., • Ability to learn quickly and address issues as they arise during normal working hours or after hours., • Ability to operate in and promote a rigorous process-driven team environment, • Ability to logically analyze and solve problems, • Ability to effectively multi-task multiple projects, • Operate Hand and Machine Tools (hammer, drill, saw, etc.), • Operate electrical tools such as a multi-meter or infrared camera Education/Experience- • Military service members eligible for the DoD SkillBridge Program, • High school diploma or general education degree (GED) Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO)11 paid company holidays and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks, • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend., • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving, • Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care., • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Control, Instrumentation and Diagnostics (CID) Systems to lead CID system design and execution for the company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Control Systems (Eos control system architecture and integration, including fast data acquisition, PLC automation, Safety and Interlock Systems)- Instrumentation Systems (instrumentation backbone across the facility, including sensors, signal architecture, wiring, grounding, shielding, tagging, and commissioning practices)- Diagnostics Systems (plasma diagnostics control and acquisition, including real time DAQ, timing and synchronization, and low latency data pipelines for plasma control) This role will own the end-to-end delivery of CID systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning control systems, instrumentation, diagnostics acquisition, embedded software, and real time integration, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the Eos CID architecture, including functional, physical, communications, timing, and data flow boundaries across fast DAQ, supervisory control, PLC automation, safety interlocks, and diagnostics acquisition., • Lead technology selection for real time control, SCADA, networking, timing, and data management, and ensure consistency across integration protocols and data interfaces., • Own the technical interface to external vendors and collaborators providing controls hardware, diagnostics hardware, and instrumentation deliverables, including technical specifications, design reviews, and acceptance participation., • Oversee development and integration of the Eos control system across major subsystems, ensuring deterministic behavior, fault handling, and operational sequencing., • Own Safety and Interlock System philosophy, including safety class logic where required, participation in hazard analyses, and alignment to functional safety practices and standards., • Own instrumentation architecture across the facility: sensor selection, signal types, isolation strategy, signal conditioning, grounding, shielding, and segregation practices for noisy, high power environments., • Oversee diagnostic acquisition architecture end to end, from front end sensors and conditioning through digitizers, FPGA processing, data streaming, and archiving in support of plasma operations and feedback control., • Partner with systems engineering to translate device requirements into CID requirements, interface definitions, and verification plans., • Run evidence based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface control documents, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including machine protection thinking, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering, Controls, Computer Science, Physics, or equivalent., • 10 or more years of relevant experience spanning two or more of the following: integrated control systems, industrial automation, fast data acquisition, instrumentation systems engineering, diagnostics acquisition, real time embedded software., • 5 or more years of engineering management experience leading multi team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in safety and high reliability engineering practices, including interlocks, alarms, fail safe design, and disciplined documentation., • Strong cross functional communication skills and experience driving technical decisions across physics, mechanical, electrical, safety, and program teams., • Exceptional work ethic and communication skills., • Experience delivering CID systems for fusion devices, accelerators, advanced nuclear, or other large scientific facilities with tight timing and data fidelity requirements., • Experience with EPICS or TANGO, and industrial integration protocols such as OPC UA, DDS, Modbus, and deterministic timing networks., • Experience with functional safety workflows and standards driven PLC systems engineering., • Experience with FPGA based acquisition and low latency streaming pipelines for real time feedback and machine protection., • Familiarity integrating AI and digital twin capabilities into supervisory control and operations workflows., • Control frameworks and integration: LabView, EPICS, TANGO, OPC UA, DDS, Modbus, TCP IP., • PLC platforms: Siemens TIA Portal, Beckhoff TwinCAT, Allen Bradley, Codesys, IEC 61131 3 practices., • Timing and synchronization: White Rabbit, IEEE 1588 PTP., • Data acquisition and diagnostics: PXIe digitizers, FPGA platforms, event and timestamping frameworks, data streaming infrastructure., • Embedded and middleware software: real time embedded Linux and real time operating systems, C and C++, distributed orchestration tooling., • Instrumentation design and documentation: AutoCAD Electrical, EPLAN, tag databases, input and output lists, cable schedules and loop diagrams.LI-RD1Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Company introduction: Compass Pathways plc (Nasdaq: CMPS) is a biotechnology company dedicated to accelerating patient access to evidence-based innovation in mental health. The Company is headquartered in London, UK, with offices in New York City in the US. We focus on developing novel treatments that have the potential to improve the lives of those who are suffering with mental health conditions and who are not helped by current treatments. We are pioneering a new paradigm for treating mental health conditions focused on rapid and durable responses through the development of our investigational COMP360 synthetic psilocybin treatment, potentially a first in class treatment. COMP360 has Breakthrough Therapy designation from the US Food and Drug Administration (FDA) and has received Innovative Licensing and Access Pathway (ILAP) designation in the UK for treatment-resistant depression (TRD) due to the pressing unmet need in this area. We are currently in phase 3 for TRD, have completed phase 2 studies for both post-traumatic stress disorder (PTSD) and anorexia nervosa and are planning a further late-stage study in PTSD. We envision a world where mental health means not just the absence of illness but the ability to thrive. - Compass Pathways. Job overview: The Senior Manager, Regional Sales is a first-line sales leadership role responsible for building, developing, and leading a high-performing specialty sales team supporting the launch and growth of an innovative mental health therapy. This leader will drive regional execution of commercial strategy by partnering with certified treatment centers, psychiatrists, and integrated care systems while ensuring alignment with regulatory, safety, and patient-access frameworks. The Senior Manager, Regional Sales will play a critical role in shaping a new therapeutic category, and creating a culture of integrity, collaboration, and patient-centricity. Location: Remote in New Jersey (New York, NY, Philadelphia, PA, Newark, NJ). Reports to: Director, National Sales. Roles and responsibilities (Include but are not limited to): • Recruit, onboard, and lead a team of Territory Account Managers, • Foster a high-accountability, psychologically safe culture that promotes coaching, development, and collaboration, • Set clear expectations and performance standards aligned with company launch objectives, • Drive successful regional execution of the commercial launch strategy and identify opportunities to expand the treatment ecosystem, • Ensure field readiness around clinical data, patient identification, treatment protocols, and site-of-care logistics, • Foster strategic relationships with psychiatrists, treatment centers, behavioral health systems, academic centers, and Key Opinion Leaders (KOLs), • Partner cross-functionally with Medical Affairs, Market Access, Training, Patient Support, etc., • Provide field insights to inform brand strategy and launch optimization, • Analyze regional performance metrics and develop action plans to drive results, • Manage regional budgets, forecasting, and territory alignment, • Bachelor's degree required (advanced degree preferred), • 8-10+ years of pharmaceutical or biotech sales experience, • 5+ years of first-line sales leadership experience, • Demonstrated success launching specialty or neuroscience therapies, • Experience in psychiatry, CNS, or behavioral health markets, • Experience launching therapies requiring site certification, REMS, or specialized administration models and/or a background working with IDNs, academic medical centers, and specialty treatment sites Please note that the base salary range is a guideline, and individual total compensation will vary based on factors such as qualifications, skill level, competencies, and work location. Base pay is one part of the Total Package that is provided to compensate and recognise employees for their work and any role at Compass, regardless of the location, is eligible for additional discretionary bonuses and equity. 【Base salary per annum】:$180,000—$230,000 USDBenefits & Compensation: For an overview of our benefits package and compensation information, please visit "Working at Compass". Equal opportunities: Reasonable accommodation We are committed to building a workplace where everyone's wellbeing matters. If you need reasonable accommodation during the interview process to be at your best, please let our recruiting team know. UK applicants We are proud of our commitment to diversity and equality (pursuant to the Equality Act 2010). We do not discriminate based upon race, religion or belief, colour, nationality, ethnic or national origin, gender, pregnancy or maternity, marital or civil partner status, sexual orientation, gender reassignment, age or disability. US applicants Compass Pathways is proud to be an equal opportunity employer. All employment decisions are based on business needs, job requirements, and individual qualifications, without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, and related medical conditions), ethnicity, age, disability, sexual orientation, gender identity, gender expression, military service, genetic information, familial or marital status, or any other status, category, or characteristic protected by applicable law. Sponsorship: Unfortunately, we cannot sponsor employment visas and can only accept applications if you have employment rights in the country to which you are applying. Data Privacy: All data is confidential and protected by all legal and data privacy requirements, please see our recruitment Privacy Notice to learn more about how we process personal data.

Job Description At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. As a Controls Systems Technician, you will work with the maintenance team to maintain and repair conveyance, automation and facilities equipment to support operations uptime and improve reliability of our systems. This role is the resident expert in controls, PLCs, communication protocols, and automation. Shift: Sunday to Wednesday - 9:00pm to 7:30am You will... • Maintain compliance with all safety, food safety, and security standards. ● Perform preventive maintenance and routine inspections on assigned automation, robotics and control panels., • Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting., • Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate., • Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment specializing in automation, controls and robotics., • Lead root cause analysis of major downtime events., • Act as a network resource for technical issues and lead network-wide root cause analysis., • Develop maintenance personnel knowledge on intermediate to advanced automation, controls and robotics., • Partner with engineering on commissioning of new controls systems., • Audit vendor work to provide feedback to leadership on quality of work and SLA performance., • 4 - 6 years of experience with conveyor, automation, robotics, PLC troubleshooting/programming, communications protocols (Profi, DeviceNet, Ethernet TCP/IP etc.)., • Advanced understanding of PLCs and automated processes., • Advanced computer skills., • Ability to read and understand drawings, schematics and diagrams. ● In depth experience working with PLCs, HMIs, VFDs etc. to include programming, troubleshooting, repair and maintenance., • Ability to travel as necessary (up to 10%) for business purposes., • High School diploma or equivalent., • Excellent follow through, judgment, and common sense. "Make it happen" attitude., • Competitive hourly rate, 401K company match that vests immediately upon participation, • Generous PTO and additional sick leave, • Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment, • Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_), • Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+ At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company’s commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn. HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:

Job Description Stable NJ OEM of PLC Automation Systems for Essential Industries Small Collaborative Team, New and Interesting Projects. On-Site role (no travel), Competitive Salary, Bonus and Good Benefits. Desired Skills/Experience: • Strong command of PLC Programming and Ladder Logic, • Proficiency in Electrical AutoCAD, • Experience spec’ing and building automation systems, including:, • PLC connectivity to industrial networks (e.g., Ethernet/IP, Modbus, Profibus), • PLC integration with PCBs and embedded electronics, • Control panel and cabinet design and assembly, • Systems documentation and startup procedures, • Bill of materials and part list creation, • Experience designing systems with Electric Power Scaling to 'Step Up Power and Step Down Power'; should be familiar with Voltage Regulation, Dynamic Response, Impedance Regulation, Power Conditioning/Power Modulation or similar areas., • Experience with Power Elements of Electronic Systems: Transformers, SwithGears, Breakers, Mini-Substations. Note: base salary quoted does not include bonus. Company DescriptionTerrific Company Culture, Managerial Buy-In towards using technology to provide best of breed solutions to new and existing clients. A Proven leader in their niche with products and services that are sold and used in a multitude of industries (recession-resistant business model). Managers and Employers that are passionate about technology, clients and related products and services that they create, sell and support.Terrific Company Culture, Managerial Buy-In towards using technology to provide best of breed solutions to new and existing clients. A Proven leader in their niche with products and services that are sold and used in a multitude of industries (recession-resistant business model). Managers and Employers that are passionate about technology, clients and related products and services that they create, sell and support.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Senior Control Systems Engineer to work on the design of the control system for the company’s Eos integrated stellarator. This role will define the overall control system architecture, select core technologies, design platforms, and manage technical interfaces between all major control subsystems including plasma control, power supply control, cryogenic control, safety systems, and data acquisition. As a senior technical engineer, this role will work closely with subsystem teams, vendors, and collaborators to ensure that the architecture meets real-time performance, reliability, scalability, and regulatory requirements. This role is pivotal in shaping the next-generation control infrastructure for one of the most innovative stellarator-based fusion pilot plants in development. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the definition of the Eos control system architecture (functional, physical, and communication layers)., • Select core technologies for real-time control, SCADA, networking, timing, and data management., • Develop high-level system specifications, interface control documents (ICDs), and system block diagrams., • Oversee integration and coordination of control subsystems., • Ensure consistency across communication protocols (e.g. OPC UA, DDS, Modbus, EPICS)., • Contribute to the selection of PLC/DCS platforms for safety- and mission-critical systems., • Work with the AI/ML and Plasma Control teams to integrate predictive control and digital twin functionality into the architecture., • Support development of conceptual and preliminary design packages, including architecture reviews and validation plans., • Collaborate with systems engineering to ensure alignment with the overall plant functional architecture and TRL maturity goals.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Control Systems, Physics, or related field., • 5+ years of experience in control system design for fusion energy, particle accelerators, large scientific facilities, or similar high-reliability environments., • Strong proficiency with EPICS or TANGO control frameworks, Simulink and MATLAB for system modeling and simulation, SysML/UML for system-level architecture and documentation, and OPC UA, DDS, TCP/IP, PTP/White Rabbit communication protocols., • Experience with high-speed data acquisition, real-time systems, and distributed control., • Knowledge of IEC 61508 / 61511 or other safety-related standards., • Familiarity with PLC platforms (e.g. Siemens, Beckhoff, Allen-Bradley)., • Experience working in multi-disciplinary teams and managing technical vendors., • Hands-on experience with FPGA or embedded systems is a plus., • Previous experience in early-phase fusion device development is highly desirable.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative, inclusive environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Critical Operations Engineer II Role: The Data Center Technician IV must possess an expert level of knowledge and will be responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, fire life safety systems, and communications infrastructure. We are currently hiring for the Swing Shift 3:00pm-11:30pm, Tuesday - Saturday. Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Communications Infrastructure responsibilities will include IFD / MDF / MMR management, structured cabling and supporting infrastructure ownership, and customer space management. This position will also be directly responsible for the processes that maximize customer uptime in the most cost-effective way by working very closely with the Data Center Manager. Technicians must ensure that data center problems are identified and repaired quickly, contractors deliver quality services, and internal customer demands are met. A Tier IV technician develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Duties:Data center subject matter expert for electrical, mechanical, controls, and fire life safety systems.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control. Tracking and trending operational characteristics. Mentoring of junior staff.Work with the site Data Center Manager to track and complete an aggressive preventive and predicative maintenance scheduleWork with and provides guidance, to the site Data Center Manager to determine maintenance requirements for mechanical and electrical systemsEnsure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and ITManage systems to avoid unplanned, customer-impacting outages Manage the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiencyProvide applied mechanical and integrated control expertise for the entire data centerWork as a primary knowledge expert in regard to fire and electrical codes.Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Assist Data Center Manager with the database management of maintenance discrepancies and work with Operations management to resolve site issues based on agreed upon priorities.Trouble Ticket ManagementWork Order Completion ProcessInfrastructure projects (Internal/Customer)Cage Build-OutsOverhead InstallationsRack and StackNavigate and utilize a CMMS system.Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Ensures that processes are completed in a timely manner pertaining to Service Level Agreements (SLA) and data is uploaded to the OSS accordingly.Provide physical security within the CoreSite premises.Provide day-to-day exceptional customer service and support.Incident escalation and report writingMonitor the building fire alarm system.Maintain and complete regular facility and security tours documenting and responding to found issues.Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and 8 Guiding Principles. Requirements Knowledge:Expert understanding of the electrical and mechanical systems used in a facility and data center environment, including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler SystemsExpert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safetyExpert knowledge of fiber optics / cabling infrastructure and industry best practices.Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)Expert knowledge and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems Skills:Minimum of 5-7 years of experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, and Double Interlock Pre-Action SystemsProven leadership skillsProven expert and laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Excellent communication skills, both written and oral including Microsoft Suite (Word, Excel, PowerPoint, Project). Abilities:Ability to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems.Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/Experience:Bachelor’s degree in Mechanical or Electrical Engineering or equivalent time in rate.5 or more years in a mechanical/electrical position within critical facilities (preference given to a data center, hospital, or power plant experience)Be able to pass an extensive background check, including criminal history, personal references, employment and education verifications, and Department of Motor Vehicle and credit check. Physical Demands and special requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Compensation: Compensation for this role includes a base salary between $43.00/hr and $47.00/hr. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Critical Operations Engineer I Role: The Data Center Technician III assists in the operational integrity, security, and regulatory compliance of the data center. The technician is to have a strong knowledge of telecommunications, mechanical, electrical, and life safety systems as well as data center operating procedures. We are currently hiring for the Night Shift 11:00pm-7:30am Sunday - Thursday A Tier III technician will be responsible for day to day operations of the data center including facilities and telecommunication infrastructure. The responsibilities are wide ranging and multi-disciplinary. Mechanical responsibilities will include working on chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, humidification systems, and central plant operations. Electrical responsibilities will include working on electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load including power circuit installations. Fire Life Safety responsibilities will include monitoring wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Telecommunications responsibilities will include cross connect installations, cabling infrastructure management, advanced remote hands support, and customer cage and cabinet build outs. Responsibilities will include customer infrastructure build-outs (cage builds, overhead installations, rack and stack), cable termination and testing, maintenance work, monitoring and responding to mechanical, electrical, fire protection, telecom, and security systems. These systems include, transformers, PLC’s, generators, switchgear, UPS systems, STS’, ATS’ PDU’s, chilled water systems, CRAC/CRAH, wet sprinkler systems and pre-action sprinkler, network equipment, transmission media, cabling infrastructure, security hardware, and CCTV. Duties:Completion of CoreSite’s Data Center Operations Qualification Program to the tier level at which you are hired within the first nine (9) months of employment.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control.Tracking and trending operational characteristics.Provide feedback to management on the effectiveness of existing standards and processes.Works with contractors and consultants for all system expansions, corrections and upgradesWork with the senior technicians to track and complete an aggressive preventive and predicative maintenance schedule.Ensure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction as per CoreSite guidelines. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and IT.Manage systems to avoid unplanned, customer-impacting outages.Navigate and utilize a CMMS system.Provide day-to-day exceptional customer service and support.Maintain and complete regular facility and security tours documenting and responding to found issues.Assist with the database management of maintenance discrepancies and work with to resolve site issues based on agreed upon priorities.Follow direction from data center management regarding the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiency.Trouble Ticket and Remote Hands ManagementFiber and Copper cabling terminationsCircuit path creation and verificationCoordinate and oversee power installations and upgradesWork Order Completion ProcessInfrastructure projects (Internal/Customer)Cage and Cabinet Build-OutsOverhead InstallationsRack and Stack Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Incident escalation, response, and follow-up report writingManage building service requests through resolution.Perform and complete work orders and customer service tickets in a timely mannerServe in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Adhere to and promote CoreSite’s Principles of Operational ExcellenceProvide applied mechanical and integrated control expertise for the entire data center. Requirements This position is required to interact with CoreSite personnel, vendors, partners, contractors and clients. KnowledgeFirm and proven understanding of the electrical and mechanical systems used in a data center environment.Firm and proven understanding of fiber optics / cabling infrastructure and industry best practices.Firm and proven understanding of Proficient knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safety Proficient knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations) Proficient and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems SkillsMinimum of 2 years experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water SystemsLarge Centrifugal ChillersCooling TowersHeat ExchangersWater Treatment SystemsVFD’s and PumpsHVAC equipmentCRAC/CRAH’sHumidification SystemsBMS and PLC ControlsEmergency Standby Diesel Generator SystemsFuel/Oil systems, 480/277 and 208/120 electrical generation and distributionStatic UPS SystemsDouble Interlock Pre-Action SystemsCommunications cabling Cabling infrastructureNetwork infrastructure and hardwareExperience laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Proven leadership skillsExcellent communication skills, both written and oralSuite (Word, Excel, PowerPoint, Project) AbilitiesAbility to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems. Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/ExperienceHigh School Diploma or greater2-5 years of experience in the data center industry Be able to pass an extensive background check, including criminal history, personal references, employment and education verification, and Department of Motor Vehicle and credit check. Physical Demands and Special Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Compensation: Compensation for this role includes a base salary between $38.00/hr and $40.00/hr. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO)11 paid company holidays and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipend.Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care.Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description Who we are: Formic is on a mission to reshape American manufacturing by making automation accessible to every factory. As labor constraints rise, costs increase, and global competition intensifies, automation is no longer optional for manufacturers that want to stay competitive. We deliver automation through a Robotics-as-a-Service model that combines industrial robotics, proprietary software, and full-service support into a single, integrated solution. By removing the traditional barriers of cost, complexity, and risk, we enable manufacturers to deploy automation quickly and realize measurable gains in throughput, safety, and operational efficiency without large upfront capital investment. Backed by leading investors including Lux Capital, Initialized Capital, Blackhorn Ventures, and Mitsubishi HC Capital North America, Formic is scaling rapidly and building the foundation for a new era of high-performance, Made in America production. About the team: The Fleet Operations Team drives uptime and operational performance across Formic's growing fleet of deployed robotic systems. Working inside live manufacturing environments, the team diagnoses issues, restores production, and continuously improves system reliability at scale. Fleet Operations operates at the intersection of robotics, controls, and real-world factory execution, ensuring Formic's automation delivers consistent, measurable performance across diverse industrial applications. About the role: As a Robotics Field Service Engineer, you are the front line of technical ownership across Formic's deployed robotic cells. You will diagnose failures, restore systems to production, perform preventative and corrective maintenance, and represent Formic directly within customer facilities. This is a hands-on, high-accountability role in uptime-critical environments. Success requires strong troubleshooting discipline, calm execution during production interruptions, and structured documentation. Your work directly impacts fleet performance, customer satisfaction, and long-term system reliability. In this role you will: • Perform preventative, corrective, and predictive maintenance on robotic manufacturing cells, • Respond to remote and on-site escalations, diagnose root causes, and restore systems quickly, • Provide hands-on technical support to customer operators and maintenance teams, • Log service activity, asset updates, and spare part requirements in CMMS systems, • Coordinate field scheduling and support with customers, vendors, and internal stakeholders, • Monitor system performance remotely using Formic dashboards and fleet tools, • Document service work, root cause analysis, and follow-up actions with clarity and precision, • Identify recurring failure patterns and escalate systemic risks for broader improvement, • Build professional, trusted relationships with plant managers and site personnel, • Operate with strict adherence to safety standards, including LOTO and industrial compliance, • Participate in RCA sessions, audits, and continuous improvement initiatives, • 3+ years of hands-on field service experience supporting robotic or industrial automation systems, • Strong troubleshooting skills across electrical, mechanical, PLC, or robotic control systems, • Ability to read electrical schematics, wiring diagrams, and pneumatic drawings, • Experience using CMMS platforms to track and report maintenance activity, • Comfortable with local travel up to 80% and overnight travel up to 50%, • Clear written and verbal communicator capable of producing structured service documentation, • Experience with 6-axis robot brands such as Fanuc, KUKA, Yaskawa, ABB, or Universal Robots, • Familiarity with palletizing, case packing, pick-and-place, or conveyor systems, • Experience in food, beverage, packaging, CPG, or other high-speed manufacturing environments, • Prior customer-facing field experience, • Equity in Formic: Participate in our stock option program and share in the success of a fast-growing start-up backed by leading global investors, • Competitive & Uncapped Commission Structure: Designed to reward performance and impact in commission-eligible roles, • Comprehensive Healthcare Coverage: Medical, dental, and vision insurance through Blue Cross Blue Shield and Unum, with 99% of employee premiums covered and 75% coverage for dependents, with optional buy-up plans available, • Additional Insurance Benefits: FSA and DCFSA, life insurance, short-term disability, and long-term disability through Unum, all 100% employer-paid, • Employee Assistance Program (EAP): Fully funded by Formic, offering support when you need it most, • Paid Parental Leave Program: Up to 12 weeks of paid parental leave, • Company-sponsored 401(k): Invest in your future with our company-facilitated retirement savings plan, • Home Office Stipend: A one-time allowance for fully remote and hybrid employees to support an at-home or on-the-road work setup, • Monthly Cell Phone Reimbursement: Monthly stipend toward personal phone and internet expenses Final offers are customized based on experience, geographic location, market considerations, and a candidate's preferred balance of cash and equity. Our goal is to attract and reward top talent who will have significant impact, and we are open to thoughtful discussions to align on the right structure. Compensation Range:$29—$44 USD What we look for: We're building this company from the ground up, and every person we hire has an outsized impact on our culture, performance, and trajectory. While each team member brings unique strengths and perspectives, we look for people who align with our Operating Principles and embody them in action. If this sounds like you, Formic may be the right place for you! • Fearless Optimism: You make bold bets and default optimistic. You believe in the mission, aren't paralyzed by risk, and fear inaction more than failure. You see ambiguity as opportunity and bring energy to building what doesn't yet exist., • Create the Magic: You absorb complexity so customers don't have to. Whether your customer is external or internal, you focus on delivering experiences that are clear, fast, value-added, and outcome-driven. You don't say "not my job." You make things work., • Today, Not Tomorrow: You have a bias to action. You close the loop. You take extreme ownership. You understand that speed compounds, and you don't confuse activity with results., • Seek Truth: You think from first principles. You value data over ego and strong opinions loosely held. You're willing to challenge assumptions, including your own, in pursuit of the best answer., • Made of Rubber: You are resolute and adaptable. When things break or priorities shift, you rebound stronger. You treat setbacks as learning moments and move forward with grit. Formic is an equal opportunity employer. We do not discriminate on the basis of race, color, religion or religious creed, sexual orientation, gender, gender identity, marital status, family or parental status, disability, military or veteran status, or any other basis protected by law. All employment decisions are based on a person's merit, business needs, and role requirements. If you require further accommodations or have questions regarding accessibility of our roles, please reach out to . AI Use: At Formic, fairness and transparency are at the heart of our hiring process. We use AI-powered tools in some interviews to help our teams evaluate candidate responses, but all final hiring decisions are made by humans. You can learn more about how AI is used in our recruitment process by reviewing our AI Hiring Disclosure linked here.

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative, inclusive environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Critical Operations Engineer II Role: The Data Center Technician IV must possess an expert level of knowledge and will be responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, fire life safety systems, and communications infrastructure. We are currently hiring for the Day Shift 7:00am-3:00pm, Monday - Friday. Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Communications Infrastructure responsibilities will include IFD / MDF / MMR management, structured cabling and supporting infrastructure ownership, and customer space management. This position will also be directly responsible for the processes that maximize customer uptime in the most cost-effective way by working very closely with the Data Center Manager. Technicians must ensure that data center problems are identified and repaired quickly, contractors deliver quality services, and internal customer demands are met. A Tier IV technician develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Duties:Data center subject matter expert for electrical, mechanical, controls, and fire life safety systems.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control. Tracking and trending operational characteristics. Mentoring of junior staff.Work with the site Data Center Manager to track and complete an aggressive preventive and predicative maintenance scheduleWork with and provides guidance, to the site Data Center Manager to determine maintenance requirements for mechanical and electrical systemsEnsure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and ITManage systems to avoid unplanned, customer-impacting outages Manage the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiencyProvide applied mechanical and integrated control expertise for the entire data centerWork as a primary knowledge expert in regard to fire and electrical codes.Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Assist Data Center Manager with the database management of maintenance discrepancies and work with Operations management to resolve site issues based on agreed upon priorities.Trouble Ticket ManagementWork Order Completion ProcessInfrastructure projects (Internal/Customer)Cage Build-OutsOverhead InstallationsRack and StackNavigate and utilize a CMMS system.Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Ensures that processes are completed in a timely manner pertaining to Service Level Agreements (SLA) and data is uploaded to the OSS accordingly.Provide physical security within the CoreSite premises.Provide day-to-day exceptional customer service and support.Incident escalation and report writingMonitor the building fire alarm system.Maintain and complete regular facility and security tours documenting and responding to found issues.Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and 8 Guiding Principles. Requirements Knowledge:Expert understanding of the electrical and mechanical systems used in a facility and data center environment, including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler SystemsExpert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safetyExpert knowledge of fiber optics / cabling infrastructure and industry best practices.Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)Expert knowledge and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems Skills:Minimum of 5-7 years of experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, and Double Interlock Pre-Action SystemsProven leadership skillsProven expert and laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Excellent communication skills, both written and oral including Microsoft Suite (Word, Excel, PowerPoint, Project). Abilities:Ability to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems.Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/Experience:Bachelor’s degree in Mechanical or Electrical Engineering or equivalent time in rate.5 or more years in a mechanical/electrical position within critical facilities (preference given to a data center, hospital, or power plant experience)Be able to pass an extensive background check, including criminal history, personal references, employment and education verifications, and Department of Motor Vehicle and credit check. Physical Demands and special requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Compensation: Compensation for this role includes a base salary between $43.00/hr and $47.00/hr. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job DescriptionCompany Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. Job Description Position Purpose: Project Engineer – Performs commissioning of electrical systems. Must be a self-motivated & energetic professional. Must have understanding of building electrical systems design & construction. Must have experience with commissioning process of electrical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of electrical systems and related controls. Candidate will be responsible for reviewing project information; executing daily field activities; maintaining project documentation; assisting the Senior Project Engineer; and providing guidance to associate project engineers. This role requires the candidate to have technical competency, organizational skills and is expected to work well in a team environment. Primary Duties/Responsibilities: • Commission electrical distribution equipment and related controls, primarily in data center environments, including medium voltage systems., • Review system designs for compliance with client facility goals., • Assist with preparing plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment and measure results using test instrumentation., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with project teams to coordinate and execute field activities., • Review and provide input on commissioning project documentation and schedules., • Assist with submitting and maintaining daily commissioning reports., • Assist in the training of Associate Project Engineers., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with building equipment, including, but not limited to:, • Generator, • Generator Paralleling Switchgear, • High / Medium / Low Voltage Transformer (XFMR), • Uninterruptible Power Supply (UPS Systems), • Battery Systems, • Medium / Low Voltage Switchgear (SWGR), • Low Voltage Main Switchboards (MSB), • PLC Control, • Automatic and Semi-Automatic Switching Controls, • Electrical Power Monitoring System (EPMS), • Automatic Transfer Switch (ATS), • Static Transfer Switch (STS), • Power Distribution Unit (PDU), • Busways, • Remote Power Panel (RPP), • Grounding Systems, • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation.Qualifications Education/Experience/Background: • BSc/MSc in Electrical Engineering with 2 or more years with mission critical project experience, or relevant and applicable industry experience or a minimum of 4 or more years of experience in commissioning with mission critical project experience, or relevant and applicable industry experience., • Experience in Mission Critical facility commissioning essential., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously and work with limited supervision., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Knowledge & experience with InterNational Electrical Testing Association (NETA) test specifications., • Reasonable understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $110000 to $115000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Now Hiring: Full-Time Maintenance Technician (Industrial Operations) We’re seeking a skilled Maintenance Technician to join our fast-paced, high-performing team. This is a full-time role with a typical schedule of 40+ hours per week, with opportunities for overtime. The position follows a 4-day workweek (four 10-hour shifts). What You’ll Do: In this hands-on role, you’ll be essential to keeping our industrial laundry operations running smoothly. You’ll maintain and service key equipment—including washers, dryers, ironers, conveyors, boilers, and air compressors. Using your knowledge of preventative maintenance and advanced troubleshooting, you’ll help reduce downtime, improve efficiency, and ensure our facility operates at peak performance. What You'll Do • Diagnose and repair: Troubleshoot electro-mechanical, pneumatic, and hydraulic systems; identify root causes and execute corrective repairs with minimal supervision., • Electrical work: Read and interpret schematics, ladder logic, and wiring diagrams; install and terminate control wiring up to 480V three-phase., • Preventive maintenance: Perform scheduled PM tasks on motors, drives, PLCs, conveyors, robotics, and automated assembly equipment per manufacturer and internal standards., • Documentation: Maintain accurate maintenance logs, work orders, and parts usage records in the CMMS (Computerized Maintenance Management System)., • Safety & compliance: Adhere to all OSHA, NFPA 70E, and site-specific lockout/tagout (LOTO) and arc flash procedures; participate in safety audits., • Continuous improvement: Identify recurring failure modes and recommend process or equipment modifications to reduce downtime and improve reliability., • Team support: Provide guidance and on-the-job training to Technician I team members; collaborate with engineering on capital projects and equipment commissioning., • Uphold equipment standards following manufacturer and company guidelines., • Engage in expansion, renovation, and cost-saving projects as needed., • Operate comfortably with pneumatic, steam, and hydraulic schematics., • Demonstrate proficiency in electronic and electrical capabilities., • Exhibit hands-on experience with PLCs, motors, and electrical circuits., • Understand pneumatics, compressed air systems, and hydraulic systems., • Navigate industrial-sized boilers and steam systems confidently., • Repair various pump styles (water and air)., • Operate forklifts and scissor lifts., • Tackle outdoor work, even in inclement weather., • Occasionally travel and work comfortably at heights.Qualifications, • Minimum 18 years old., • Associate degree or technical certificate in Electro-Mechanical Technology, Industrial Electronics, or related field, • 3–5 years of hands-on electro-mechanical maintenance experience in a manufacturing or industrial environment, • Demonstrated proficiency in AC/DC motor controls, variable frequency drives (VFDs), and control panels, • Experience with PLC-based systems and the ability to interpret ladder logic, • Proficiency reading electrical schematics, P&IDs, and mechanical drawings, • LOTO certification and NFPA 70E Electrical Safety awareness, • Ability to lift up to 50 lbs and work in varied conditions including heights and confined spacesBenefits, • Competitive hourly rate based off relatable skillset., • Great work schedules., • Enjoy paid time off, holidays, and comprehensive health, dental, and vision insurance., • Secure your future with a 401k featuring a generous company match., • Additional perks include company-paid life and disability insurance, provided uniforms, and exciting advancement opportunities.

Driver - Cylinder Location: Newark, NJ Our Driver Cylinder Handlers are responsible for safely and efficiently operating a local route delivery vehicle to deliver hard goods, compressed gas cylinders and associated products to customer locations.In this role, you also must be willing to communicate

You will have immediate exposure to real client assignments which will draw on your imagination and creativity as well as your ability to analyze data, draw conclusions and internally present results.

Develop high quality, well documented and efficient code adhering to all applicable Prudential standards. Prudential is required by state specific laws to include the salary range for this role when hiring a resident in applicable locations. United States is not affiliated with Prudential plc.

As a Healthcare Financial/Actuarial Director, you will be a key member of the Financial, Actuarial and Analytics Community of Expertise. Healthcare Financial/Actuarial Director. You will lead financial and actuarial engagements for a portfolio of clients and play a strategic role on complex accounts

United States is not affiliated with Prudential plc. Prudential is an equal opportunity employer. Prudential is required by state specific laws to include the salary range for this role when hiring a resident in applicable locations.

Job Description The Service Technician is accountable for troubleshooting malfunctioning or disabled automated, anti-vehicular barrier and bollard equipment to determine root cause of malfunction or failure and taken appropriate action to return the equipment to operational condition. The Service Technician is accountable for performing preventative maintenance procedures on same equipment as detailed by the original equipment manufacturer. The Service Technician is accountable for providing oversight of equipment installations and commissioning same equipment for proper initial customer utilization Essential Accountabilities: • Troubleshoot to root cause and repair customer’s barrier, gate and bollard equipment to ensure product performs as intended on a reliable basis utilizing only approved replacement parts, • Perform detailed and comprehensive preventative maintenance procedures on customer’s barrier, gate and bollard equipment as recommended by original equipment manufacturers, • Complete all preventative maintenance checklists, service tickets and time sheets completely and accurately; forward to office, administrative staff within 24 hours of performance of work, • Provide detailed estimates of required repairs when requested by customer representative to facilitate expense approval process, • Provide comprehensive and detailed assessment to Service Manager and Sales Manager of equipment that has reached end of life and should be replaced; provide similar feedback to customer representatives and notate on service tickets, • Oversight of an equipment installation ensuring all requirements of drawings and specifications have been met and/or satisfied, • Receive and Respond to Requests Equipment Maintenance and Repair, • Arrive at Service Office every day in preparation for day’s assignment unless directed otherwise, • Turn-in previous days paperwork including service tickets, timesheets and parts request forms and replace components, • Engage Service Manager, Service Coordinator or Lead Technician for review of day’s service call-outs and scheduled PMs, • Advise leadership of any gaps in capabilities due to parts or equipment required for specific call-outs or PMs, • Ensure assignments include point-of-contact, POC, for given facility, • Load up service vehicle with any required parts or resources not already on hand in service vehicle, • Proceed to customer site, • On call requirement for emergency repairs (rotation schedule is set up between the technicians for emergency repairs that are requested on weekdays after regular schedule hours and/or during weekends), • Initiate Customer Engagement, • Upon arrival on site ensure adequate, legal parking is provided or advise customer and office of inadequate parking, • Make initial contact with provided POC or their agent, • Confirm nature of service call, equipment detailed in call-out and working restrictions/times with POC, • Proceed to equipment site(s), • Execute Service or Repair Procedures, • Assess equipment behavior for repair needs or prepare fresh copy of PM checklist, • Effect repairs or perform preventative maintenance procedures, • Fill out PM checklists as procedures are executed, • Review all basic equipment functions to ensure equipment is returned to customer control in proper working order, • Make list of additional needs if required parts or tools/resources are not available and second call is required, • Complete Paperwork and re-engage POC, • Complete service ticket and/or ensure PM checklists are properly completed, • Review executed activities via paperwork with POC, • Gain POC signature on Service Ticket and legible printout of POC name, • Leave copy with POC or advise POC when copy will be forwarded, • Provide Oversight and Commissioning at a New Equipment Installation, • Ensure third party partners, suppliers or contractors have installed equipment per drawings and specifications., • Identify and communicate in installation details that are not per same drawings and specifications to third parties and leadership staff, • Commission new equipment installation via verification of all system functionality and designed and specified via site specific sequencing and execution parameters, • Report any details of functionality that does not conform to site specific requirements to Engineering and Leadership personnel, • Validate corrective action rectifies shortfall previously communicated Key Performance Parameters and Metrics: • Execute service calls in timely manner in line with existing labor standards, • Turn in all paperwork within 24 hours of performance of work without exception, • Advise Service Leadership of possible improvements to products, processes or work procedures, • Provide feedback to Service and Sales Leadership of possible equipment replacements, • Installation oversight effectively guarantees conformance to all drawings and specifications, • Equipment commissioning demonstrates comprehensive equipment conformance to intended sequencing, • Required Knowledge, Skills, and Abilities:, • Must be able to troubleshoot and repair hydraulic and electromechanical equipment including electric and electronic controls, • Must have baseline understand of electrical principals such as Ohm’s Law and how motors function, • Must have baseline understanding hydraulic principals such as force multiplication, pressure, volume and cavitation, as well as, how pumps, valves and accumulators function, • Must understand basic operating principals of programmable logic controllers and variable frequency drives; must be able to revise functional parameters of variable frequency drives, • Must have basic understanding of how vehicle detection loops function and how to troubleshoot loop/loop detector failures, • Must have good verbal skills and be able to interface directly with customers to explain basic equipment function, repair and maintenance procedures and a sequence of operation, • Must have good written communication skills to complete necessary paperwork for business execution including timesheets, service tickets and parts request forms; handwriting must be legible, • Must be able to utilize basic computer and tablet software for equipment interfacing and paperwork in lieu of hand written pieces, • Must be able to lift 50 lbs. or more repeatedly, • High School Diploma, • Minimum 3-5 years field service experience in electrical, hydraulic or mechanical machine repair, • Computer training preferred, • Electrical training/PLC/VFD training preferred, • Previous experience reading and interpreting civil and electrical drawings to confirm proper conformance Traits/Competencies required • Good Communication Skills, • Self-motivated and able to manage time, • Attention to detail, • Troubleshooting skills/fault isolation and identification, • Moderate Electrical Aptitude, • Moderate Mechanical Aptitude, • Moderate Hydraulic Aptitude, • Basic Civil Engineering Aptitude, • Competency reading basic civil and electrical drawings and validating conformance Job Location Kearny, NJ

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third-generation, family-owned business dedicated to helping manufacturers improve productivity and stay competitive. About this Role: We are hiring Field Service Technicians to support and service advanced industrial equipment, including CNC machine tools. No prior CNC experience is required. We actively hire and train experienced technicians from related industries such as: • Commercial HVAC, • Industrial electrical or low voltage electrical, • Diesel / heavy equipment, • Field service / industrial maintenance, • Aircraft mechanics If you have strong troubleshooting skills and experience working on complex mechanical and electrical systems, we will train you to become an expert in CNC equipment. What makes someone successful in this role: This role is ideal for someone who: • Enjoys diagnosing and solving complex equipment issues, • Is comfortable working independently in the field, • Has experience troubleshooting electrical and mechanical systems, • Can work through problems with or without step by step instructions, • Takes pride in learning and expanding their skills What you will do in this role: • Diagnose and repair industrial equipment including CNC machines at customer sites, • Troubleshoot electrical systems, motors, drives, encoders, and control systems, • Perform mechanical work including alignments, assemblies, and repairs, • Use tools such as multimeters and diagnostic equipment to identify issues, • Use precision measuring tools and fixtures to check machine alignments, • Interpret electrical schematics, mechanical drawings, and technical documents, • Install, commission, and maintain equipment, • Provide customer support and operator guidance when needed, • Work independently while collaborating with a team when needed, • Provide clear communication verbally and in service reports given to the customer What we are looking for: We are intentionally open to candidates from multiple technical backgrounds. Strong candidates may have experience in: • HVAC systems and controls, • Industrial or commercial electrical work, • Diesel or heavy equipment repair, • Manufacturing maintenance or field service Preferred skills (not all required): • Electrical troubleshooting (motors, drives, transformers), • Use of multimeters and electrical testing tools, • Hydraulics and pneumatics, • Control systems or PLC exposure, • Mechanical repair and alignment CNC experience is a plus, and is desirable, but is not required. Training & Growth: We invest heavily in training and development. • Hands-on field training with experienced technicians, • Classroom and manufacturer training programs, • Opportunity to become a highly skilled CNC service expert, • Clear path to increased responsibility and compensation Travel & Work Environment: • Daily travel within ~2 hours of home, • Occasional overnight travel, • Work in manufacturing environments with industrial equipment Why This Role Stands Out: • Higher earning potential than many skilled trades roles, • Significant technical growth into advanced automation and CNC systems, • Cleaner work environment compared to many mechanical trades, • Exposure to a wide variety of equipment and problem-solving scenarios What We Value: • Strong work ethic and reliability, • Willingness to learn and accept coaching, • Professionalism with customers, • Ability to work independently and solve problems, • Team-oriented mindset *The duties listed in this job description are intended only as illustration of the various types of work that may be performed.The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. • What’s in it for You: * We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary * Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance * 3+ Weeks’ Vacation to Start * 10 Company Paid Holidays * 401(k) retirement plan with company contribution Tuition reimbursement * Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit and stand for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus., • Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment., • Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas., • Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. You should be proficient in: • Heavy Equipment Repair, • Mechanical Troubleshooting Skills, • 120/208/240/480 Voltage Systems, • CNC Machine Repair, • CNC Machine Installation, • Diesel Engine Systems, • Electrical Installation, • Electrical Troubleshooting, • Electrical Repair, • Light Vehicle Diesel Engines, • HVAC Service & Installation, • HVAC Maintenance, • HVAC Troubleshooting, • HVAC Repair, • High Voltage Systems, • Maintenance and Repair Skills, • Industrial Electrical Experience, • Industrial Electrical Systems, • Diesel & Heavy Equipment Systems, • Electrical Systems & Diagnostics (Heavy Equipment), • Mechanical Systems & Component Repair, • Lockout/Tagout (LOTO), • Electrical Panel Installation, • Spindle Maintenance & Repair, • Electrical Schematic Reading, • Low Voltage Cabling Installation, • Equipment Repair & Maintenance, • Equipment Installation, • CNC Mill (3-4 axis VMC) (Fanuc, Bridgeport, Mazak, ProtoTRAK, Haas, Okuma, Doosan, Kitamura, Makino, Brother, Hurco, Dmg Mori Seiki, Hwachon), • Diesel Engine (Detroit Diesel, Cummins, PACCAR), • HVAC Systems (Frick, Evapco), • Refrigeration/Cooling Systems (Frick, Evapco), • EDM Machine (Sinker) (Fanuc, Mitsubishi, Makino, Sodick, Agie Charmilles, Accutex), • Diesel Vehicles (Ford, Jeep, Toyota, Honda, Kia), • Injection Molding Machine (Toyo, Milacron, Toshiba, Niigata, Arburg, Van Dorn, Engel, Husky, Nissei, Sodick, Sumitomo, Haitian, Bole), • Peterbilt Truck (Peterbilt, Kenworth, Freightliner, Mack), • Industrial Controls (Allen Bradley, Mitsubishi, ABB, Omron, Siemens, Schneider Electric), • Power Tools (DeWalt, Makita, Milwaukee, Bosch, Ryobi, Black+Decker, Hilti), • Tractor-Trailer (Peterbilt, Kenworth, Freightliner, International, Volvo Trucks, Western Star), • CNC Lathe (2-4 axis) (Mazak, Haas, Okuma, Doosan, Takisawa, Dmg Mori Seiki, Samsung, Murata, Fuji, Nakamura, Hyundai - Wia, Hwachon), • CNC Waterjet (Mitsubishi, Flow, Omax, Kmt, Wardjet, Jet-Edge, Cms), • CNC Router, • CNC Swiss Lathe (Star, Citizen, Tsugami, Index, Eurotech, Tornos, Ganesh, Hanwha, Yama-Seiki, Nomura), • Variable Frequency Drives (VFD), • CNC Wire Bending Machine, • CNC Plasma Cutter (Torchmate, Alltra, Messer, Arclight, Plasmacam, Shopsabre, Vicon, Burlington), • Die Cast Machine (Cold Chamber), • EDM Drilling Machine, • CNC Mill (5+ axis VMC) (Fanuc, Mitsubishi, Mazak, Haas, Okuma, Kitamura, Matsuura, Mikron, Dmg Mori Seiki, Hwachon), • CNC Lathe (5+ axis) (Mazak, Okuma, Doosan, Index, Eurotech, Miyano, Dmg Mori Seiki, Samsung, Nakamura, Hwachon), • Universal Machining Center (5 axis UMC) (Okuma, Matsuura, Dmg Mori Seiki), • Universal Machining Center (3-4 axis) (Okuma, Toshiba, Dmg Mori Seiki, Maho), • Die Cast Machine (Hot Chamber), • Calipers and Micrometers, • Programmable Logic Controller (PLC) (Fanuc, Allen Bradley, Mitsubishi, Omron, Siemens, Panasonic, Schneider Electric, Beckoff, Modicon, B&R Industrial Automation, Sigmatek), • Horizontal Machining Center (3-4 axis) (Haas, Okuma, Doosan, Makino, Toyoda, Niigata, Dmg Mori Seiki, Kiwa, Enshu), • Horizontal Machining Center (5+ axis) (Mazak, Okuma, Toyoda), • Vertical Lathe (Okuma, Toshiba, Toyoda, Hwacheon), • HMI (Sigmatek), • Conveyor Systems (Swisslog, Dematic, Körber, Hytrol, Pentanova, Alba, Wulftec, Riantics), • Servo Motors, • Cylindrical Grinder Machine, • ID Grinder Machine

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. * Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. * Demonstrating a willingness to help others and be a team member * Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. * Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. * Provide voice of Customer feedback. * Through service and Customer relationships, build brand dedication. * Conduct travel and work in a safe manner, constantly learning new technology and soft skills. * Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. * Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: * Proficient verbal and written communication and Customer relation skills. * Able to interact and effectively communicate in person and over the phone with customer and co-workers. * Present a professional image. * Must be adaptable to changes and able to deal with change, delays, or general work-related issues. * Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. * Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). * Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. * Basic mechanical and logical solving skills are a must. * Rational decision making and problem-solving skills. Work Environment * Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: * Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: * We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary * Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance * 3+ Weeks’ Vacation to Start * 10 Company Paid Holidays * 401(k) retirement plan with company contribution Tuition reimbursement * Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Must be highly mobile, able to access all areas of the premises. * Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. * Ability to sit for prolonged period of times. * Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. * Ability to frequently use hands and arms. * Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. * Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: * Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. * Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. * Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. * Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1440B, Newark NJ

As a Healthcare Financial/Actuarial Senior Director, you will be a key member of the Financial, Actuarial and Analytics Community of Expertise. Bachelor's degree in a relevant field; Actuarial designation (ASA/FSA) preferred. Expertise in financial modeling and actuarial techniques, including pricin

Mental health/emotional wellbeing (including Employee Assistance Program), medical (including prescription drug coverage and fertility benefits), dental, vision, Health Savings Account, Commuter Accounts, Health Care and Dependent Care Flexible Spending Accounts, company-paid life insurance, supplem

The Client Manager of Wrap Ups functions as the backbone of our account management teams working collaboratively to meet and exceed client expectations.They interact regularly with both clients and insurance carriers to provide the best coverage protection and knowledgeable understanding of Controll

Associate Manager - Health & Benefits Consulting.As an Associate Manager - Health & Benefits Consulting you will contribute to a wide variety of complex projects involving the design, financing and ongoing management of the full spectrum of health and benefit programs.You will serve as the project m

Director, Voluntary Benefits Consulting.Our Health and Benefits business helps large and mid-size clients control health and welfare plan costs, improve health outcomes and promote employee engagement through broad-based, state-of-the-art interventions.We provide solutions encompassing creative plan

PGIM, is the global asset management business of Prudential Financial, Inc. To find out more about our Total Rewards package, visit Work Life Balance | Prudential Careers. United States is not affiliated with Prudential plc.

As a Lead Generation Associate for WTW's North America Health and Benefits (H&B) business, you will deploy sales campaigns, tools and technology to identify, generate and cultivate potential clients.Collaborating with WTW H&B consulting, marketing, and sales colleagues you will support vital efforts

Job DescriptionProvides administrative and secretarial support for the vice president and department. RESPONSIBILITIES • Monitors and oversees facility operations for a large biotech site., • Troubleshoots and performs repairs on system issues involving electronic, electrical, pneumatic, hydraulic, and mechanical devices, Johnson Controls Metasys BMS, utility, and water systems., • Supervisor in charge of facility housekeeping staff for second shift., • Generates work orders in SAP, participates in site emergency response and Hazmat activities. Novartis Pharmaceuticals 01 Sep 2005 - 01 May 2014 ENGINEERING TECHNICIAN 1216 5th Avenue New York NY , 10029 OK to contact this employer? - No RESPONSIBILITIES • Repaired, maintained, and calibrated pharmaceutical manufacturing, production and packaging equipment.

At Diaceutics we believe that every patient should have access to the right treatment at the right time.We provide the world’s leading pharmaceutical companies with an end‑to‑end solution for the launch of precision medicine diagnostics enabled by.DXRX – The Diagnostic Network®.DXRX is the

A leading pharmaceutical solutions provider in Parsippany-Troy Hills is seeking a Client Director to enhance client relationships and drive growth within precision medicine diagnostics.This pivotal role involves achieving sales targets, developing account strategies, and engaging with key stakeholde

At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all.You'll lead with purpose, breaking down barriers to innovation in a more connected, compassionate world.This field-based role is responsible for the execution of U

Update and configure PLC, HMI, SCADA, and related control systems. Customize PLC logic and HMI interfaces based on customer needs. Experience with PLCs and related hardware (Siemens required; Rockwell, Beckhoff, or similar preferred).

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates.No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT.Commercial Con

Leads enterprise-wide Future of Work initiatives enabled by artificial intelligence (AI), automation, and advanced analytics.Responsible for structured program governance, disciplined execution, risk management, and delivering measurable business outcomes.Translates strategic priorities into well-de