Project engineer jobs in Rochester, New YorkCreate job alerts

Project Engineer-MechanicalRochester, NYFull-Time (FTE)_Direct Hire Position: Project Engineer-Mechanical Job Type: Full-Time (FTE) Location: Rochester, NY Base Salary: $100,000 to $150,000+Best-in-class benefits Industry: Construction & Trades Job Category: Engineering Job Description: Responsibilities: • Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical specifications and cost estimations., • Lead and perform standard mechanical engineering analysis of existing and new building mechanical, plumbing and fire protection systems utilizing the latest codes and technologies to provide optimized designs., • Coach/Mentor junior staff as a technical expert. Requirements: • Knowledge of NYS Mechanical, Energy and Plumbing codes, NFPA., • Proficiency in AutoCAD, Revit MEP and Microsoft Office Suite., • Ability to work in a team and communicate effectively both written and verbally., • Energy Modeling experience (Carrier HAP, TRANE TRACE, or EQUEST), LEED Green Associate and Commissioning experience, preferred., • Experience, Education, and Certification, • BS in Mechanical Engineering/Engineering Technology, • NYS PE required, • 10+ years of post-college experience., • Specific areas of expertise include chilled and hot water systems, industrial process related mechanical, building HVAC, controls, plumbing systems and fire protection., • Experience designing HVAC and plumbing systems for schools, healthcare facilities and commercial projects is preferred. Work Environment: • Professional in-office environment, • May require travel to New York state job sites 10% of the time. Physical Demands: • The job requires prolonged periods of sitting at a computer., • Travel may be required within NY State. Benefits - Full Relocation Assistance Available - Possible for ideal candidate Minimum Education - Bachelor's Degree Willingness to Travel - Occasionally

This position focuses on technical design, construction oversight, and project delivery for transportation structures including bridges, culverts, and related infrastructure systems. RESPONSIBILITIES Execute structural design and load analysis for bridge projects and foundation systems Develop techn

Responsibilities Generate preliminary and final design documentation for highway construction and rehabilitation initiatives Engineer roadway components including geometric alignment, earthwork grading, stormwater management systems, and traffic control elements Supervise technical work of engineeri

Mercor is recruiting Civil Engineers as independent contractors working on a research project for one of the world’s top AI companies. This project involves using your professional experience to design questions related to your occupation as a Civil Engineer.Applicants must: - Have 4+ years full-time work experience as a Civil Engineer; and - Be based in the US, UK, or Canada Here are more details about the role: - We aim to make the hourly compensation rate offered to you competitive based on your professional background and geographic location (please note that the listed hourly compensation scale is for U.S.-based applicants and that that scale will differ depending on where a candidate is geographically based) - The work is fully asynchronous and can be done around your schedule - This project requires that you be able to commit a minimum of 15 hours per week - The work will last for approximately 3-4 weeks after you begin the project - Please note you will need access to a desktop or laptop computer for this project and that we cannot accept applicants who use chromebook computers With respect to pay and legal status: - We can meet industry-standard compensation expectations for your current role - We will pay you out weekly via Stripe Connect based on the number of project work hours that you log - You will be classified as an “at-will” contractor to Mercor - Please note that we cannot currently support H1-B or STEM OPT status candidates

The Facilities Engineer is the technical expert to address a multitude of building, land and process engineering requirements as Eastman Business Park continues to grow its development with both Kodak and external Kodak tenants acquiring space or constructing buildings. This responsibility is the primary source for investigation for Kodak site projects, tenant projects, and is the Energy Manager representing Kodak EBP buildings. The role utilizes various tools and software to monitor building utility consumption to assist with determining energy reduction projects and systems upgrade/modernization for the organization. The Facility Engineer collaborates with RED Rochester and equipment providers to coordinate organizational energy and sustainability programs and provide analysis, information, and recommendations to applicable leadership. Responsible for providing technical analysis, review, measurement, and verification projects. Responsibilities: • Acts as project lead for development of energy savings projects, working with NYSERDA and internal organizational representatives., • Leads technical projects involving Kodak or tenant requirements, evaluating needs, scoping project and providing project cost estimates., • Provides technical analysis/review for projects, providing project risk assessment., • Identify and establish working relationships with all necessary engineering, construction, and procurement firms (with focus on energy conservation and generation resources) required to execute energy recommendations., • Perform building “walk-through” and identify energy conservation measures (architectural, mechanical, electrical, etc.) throughout Eastman Business Park buildings., • Effectively develop scopes of work for and manage consulting engineers performing building audits., • Effectively analyze and assess the economic impacts of utility company rate structures and supply side options in a wide variety of customer environments., • Use of simulation software and spreadsheets to accurately represent pre and post retrofit building operation and customizes software and spreadsheets to achieve desired technical results and presentations., • Recommends best methods for measurement and verification of system performance., • Have working knowledge of DDC & PLC logic, PID loop control etc. on systems such as Rosemount; Siemens; DeltaV; Schneider; Alerton; Allen-Bradley etc., • Interface with various existing building automation systems networked between buildings. Modify and repurpose systems as required to optimize operations for energy reduction. Update and/or modify SCADA graphical user interfaces as necessary on various platforms. ie.: Intellution Fix32; GE iFix; DeltaV iFix etc., • Troubleshoot sitewide control issues to determine the root cause of problems., • Calibrate field instrumentation as necessary to maintain accurate site system control., • Conducts interim reviews during project construction to assess guaranteed impact of any changes to the original contract scope of work., • Accurately assess and provide feedback on project engineering risk., • Provide continuous improvement recommendations for optimizing energy usage and equipment upgrade and modernization., • Analyzes data output for trends and/or any deviations that need further investigating., • Assists in the preparation of cost estimates for projects. Qualifications: • Bachelor’s Degree in Engineering or related discipline., • 7 Years+ experience in a related field in an industrial/manufacturing environment., • Demonstrated experience and utilities expertise in buildings systems and equipment processes., • Broad knowledge of various skilled trades. Personal attributes: • Excellent customer service skills required, daily interface with both internal Kodak and external tenant needs., • Understands concepts of continuous improvement to drive efficiency in day-to-day work., • A high level of professionalism, integrity, and discretion in interactions with building occupants, contractors and team members., • Experienced with safe work practices/requirements and ensuring compliance., • Excellent verbal and written communication skills for communicating within team and with internal and external tenants., • Strong problem solving and analytical skills., • Strong team player., • Excellent interpersonal skills and able to work cooperatively within a team environment, along with demonstration of flexibility., • Able to organize/prioritize personal workload., • Ability to work in a fast-paced, changing work environment. Physical Requirements: • Regularly lift and or move up to 25lbs/12kg., • Regularly required to stand; walk; sit, bend, and talk or hear., • Heights; may require some work from a step ladder., • Frequently required; use hands to manipulate or feel and reach with arms., • Work may require employee to be exposed to inclement weather conditions., • Some repetitive work: potential use of hand tools to demonstrate actions.

Systems Engineers, Hardware Engineers, Quality/Regulatory, Operations, Marketing, Manufacturing, Service, Clinical Medical Affairs, Project Management Office. QuidelOrtho is looking for a Senior Software Engineer to join our R&D Instrument Platforms organization to provide technical leadership for t

The Senior Construction Inspector will also oversee the work of other inspectors on the project and assist the Engineer-In-Charge with the administrative duties involved in the coordination of the project. Under the direction and supervision of the NYSDOT Engineer-In-Charge, the Senior Construction

IMEG is seeking a Senior Mechanical Engineer specializing in HVAC, plumbing, and fire protection systems to join our Mechanical team in Rochester, New York.In this role, you will lead the design and delivery of large, complex building projects, providing project management, engineering analysis, and

L3Harris is seeking an experienced and highly motivated embedded software engineer to join our dynamic team. Ability to collaborate effectively in a cross-functional team including hardware, software, and systems engineers. Work closely with an Agile team of experienced software engineers on project

The Sr Inspector will also oversee the work of other inspectors on the project and assist the Engineer-In-Charge with administrative responsibility for interpreting, organizing, executing, and coordination of the project. Supervise work of other inspectors. Under the direction and supervision of the

Construction inspection and administration. We are seeking a Construction Resident Engineer (RE) with experience with bridge replacements for a project in Rochester area, NY (Monroe County). This role will begin immediately and requires overseeing inspection staff and construction activities to ensu

Civil Engineer, Construction Inspector, Construction Foreman, Construction Manager, Project Superintendent, Civil Engineering Technician, Safety Manager, Safety Inspector, Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Brid

Project Engineer Job Duties: Completes engineering projects by organizing and controlling project elements. Determines project schedule by studying project plan and specifications, calculating time r

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Rochester, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Maintain client relationships. Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is currently interviewing for an Electrical Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager, or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimations., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR uryX9rG3jP

Job DescriptionTeam Leader, Bridge Design Team Leader, Bridge Design Rochester, Buffalo, Syracuse, NY Description If you are a team player with a passion to drive your career in Bridge Design, we are the place for you! We are seeking a Team Leader to add to our growing and talented Bridge Design team. As a Team Leader specializing in Bridge design, your role will include managing a team of bridge design staff, managing projects, preparation of proposals, preparing complete project documents for transportation projects; reviewing complete project documents for conformity and quality assurance; and coaching junior staff in the preparation of design calculations, design details, specifications and cost estimates. Responsibilities: • Manages a team of Bridge Design staff, • Manages Bridge Design projects, • Manages the preparation of design calculations and details, • Manages the preparation of contract plans and specifications, • Manages the preparation of construction cost estimates, • Manages the review of construction submittals, • Performs occasional field visits to collect data and evaluate existing conditions, • Performs occasional field visits to resolve construction issues, • Performs oral presentations on technical topics to the public and other engineers, • Participates in business development activities, • Possesses advanced knowledge of applicable engineering principals and techniques, • Effectively expresses thoughts and ideas both verbally and in writing in the English language, • Proficient in the use of applicable computer software, • Performs assigned tasks accurately and efficiently, • Is an active and supportive team member, • Understands basic safety requirements, • Able to lead multiple projects, • Able to manage a team of Bridge Design staff, • Bachelor's or Master's degree in Civil/Structural Engineering, • 10 or more years of progressive experience in the field, • Professional office environment, • Occasional work outside of the office at project sites, • Travels occasionally within NY State and surrounding areas, • Interacts with other team personnel and clients, • Must physically be able to perform field inspection work, e.g., carry/climb ladders, wade in streams, work around traffic, work at heights, etc., • This job requires prolonged periods of sitting at a computer We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. If you are seeking a dynamic and rewarding career in the architecture and engineering field, we will offer you exciting opportunities to work on impactful projects, collaborate with talented professionals, and contribute to our continued success. As a certified minority-owned business enterprise (MBE) in New York, we embrace diversity and foster an inclusive work environment. Together, we can shape a future of innovative design, engineering excellence, and client & employee satisfaction. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 06/25/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Electrical who excels by transforming complex electrical requirements into safe, reliable, and integrated building infrastructure solutions. You lead projects from conceptual design through commissioning, using deep technical expertise, system analysis, and real-world constructability insight to ensure every electrical system is code-compliant, cost-effective, and optimized for long-term performance. You thrive at bridging design and field execution-coordinating seamlessly with mechanical, controls, and low-voltage teams to deliver fully integrated building solutions that support smarter, more efficient operations. Through technical leadership, cross-functional collaboration, and mentoring of engineering staff, you elevate project quality, reduce risk, and strengthen Stark Tech's reputation for delivering high-performing electrical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in electrical building infrastructure, power distribution, or energy/efficiency-driven electrical design., • Proven experience leading projects and managing engineering or cross-functional teams., • Expert knowledge of NEC, NFPA, IEEE, and local AHJ electrical requirements., • Strong understanding of service entrance design, switchgear, grounding, lighting, motor control, and distribution systems., • Experience performing power system studies (short circuit, arc-flash, coordination, voltage drop, load analysis)., • Skilled in producing Basis of Design documents, one-lines, riser diagrams, specifications, and construction documentation., • Ability to coordinate electrical designs with mechanical, structural, controls, and IT teams for fully integrated solutions., • Experience supporting commissioning, functional testing, performance verification, and owner turnover processes., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Mechanical Engineer (Licensed PE) Location: Rochester, NY (with occasional travel to our Central NY office) Type: Full-time, Exempt Company Overview Crosby Brownlie, Inc. is a leading industrial mechanical contractor in Rochester, NY, providing plumbing, HVAC, process piping, refrigeration, and fabrication services across Upstate New York. For decades, our success has been driven by our design-build approach and the deep expertise of our project managers, detailers, and field staff. This role is a chance to blend engineering with hands-on design-build delivery, working alongside some of the most knowledgeable professionals in the region. Role Overview We are seeking a licensed Professional Engineer (PE) to serve as the technical anchor for Crosby Brownlie’s engineering efforts and to review and stamp mechanical drawings and designs. You will partner closely with design-build leaders to bring engineering rigor to our proven delivery process, while ensuring compliance with codes and standards. This position includes significant influence over design standards, QA/QC, and coordination with detailing, fabrication, and field teams. Key Responsibilities • Review, approve, and stamp mechanical system drawings and designs (HVAC, plumbing, refrigeration, process piping)., • Serve as the responsible engineer for submitted documents; ensure compliance with NYS codes, ASHRAE, SMACNA, NFPA, and client specifications., • Lead system load calculations, equipment selections, and system layouts; validate energy, performance, and safety assumptions., • Direct and collaborate with detailing/coordination teams on BIM and constructability reviews; drive clash resolution and design-for-fabrication., • Establish and maintain QA/QC procedures for engineered documents and calculations., • Engage in field problem-solving (RFIs, submittals, shop drawings, change orders) and support start-up/commissioning as needed., • Coordinate with clients, architects, and AHJs; participate in permit and plan review processes., • Active Professional Engineer (PE) license in New York (Mechanical or closely aligned discipline)., • Bachelor’s degree in Mechanical Engineering (ABET-accredited or equivalent)., • 5+ years of mechanical design experience with building/industrial systems., • Demonstrated experience stamping mechanical drawings and taking professional responsibility for engineered work., • Proficiency with design and coordination tools (e.g., Revit MEP, AutoCAD, and common load/pipe/duct sizing tools)., • Experience within a mechanical contracting or design-build environment., • Familiarity with fabrication-level drawings and shop workflows., • Commissioning/start-up exposure and field or trades experience., • Competitive salary commensurate with experience., • Full benefits package including medical, dental, and vision., • Retirement plan (401(k) or similar) with company match., • Paid time off and holidays., • Professional development support (license renewals, continuing education)., • Work alongside expert detailers, fabricators, and field leadership on diverse projects (industrial, commercial, institutional)., • Be the in-house PE for a high-performing design-build contractor., • Influence projects end-to-end—from concept to fabrication and installation. Please submit your: • Resume/CV

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical leader for the organization, with the responsibility of expediting the process flow of jobs through the factory from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Requirements Minimum Qualifications: Position is located in Rochester, NY • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word, Excel and MRP Systems, • Solid understanding and application of Geometric Dimensioning & Tolerancing (GD&T), • Ability to read and understand blueprints at an advanced level, • Experience in the utilization of lean manufacturing practices and ISO Quality Systems, • Three years or more of manufacturing/sheet metal with welding fabrication knowledge, • CNC machining / programming background is a plus, • Ability to design & model in 3D CAD Software, Solidworks Preferred Production Specific Duties: • Voices all concerns while working with other production staff, Quality Assurance, Engineering and Vice President of Operations to resolve any and all current or potential problems affecting the production schedule, • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures, • Recommend continuous improvement actions for improving work processes Departmental Specific Duties: • Responsible for all phases of the CNC Programming Process, review Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual time and material standards vs. quoted time and material standards, • Drive process improvement to generate cost reduction, • Help write the process sheets (travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed, • Design tooling and gauges as needed to ensure customers quality requirements are achievable, • Control proper revision levels for all programs in the company database Measurement Tools: • On time delivery to customers, • Quality performance recognized in scrap reduction and minimized process variation, • Decrease in job setup time on all equipment, • Cost savings for production; including tooling, • Project management and document control organization skills

Job DescriptionGreetings from Donato Technologies Inc. We have an immediate opening with my client. If you are looking for a new project, please send me a copy of your updated resumes Description Position: Transmission Line Engineer Location: Rochester, NY Metropolitan Area (Hybrid) Experience: 35+ years in power system civil engineering Salary Range: $85,000 $125,000 About the Role: A leading international engineering and consulting firm is seeking a Transmission Line Engineer to join its growing operations in the Northeast U.S. power transmission and distribution sector. The firm provides engineering solutions for industries such as power, petrochemical, manufacturing, research facilities, and astronomy. This role offers a hybrid work environment, professional growth, and exposure to large-scale infrastructure projects. Key Responsibilities: • Design and manage transmission line projects from planning through implementation., • Perform conductor selection, structure recommendations, insulation studies, A/C interference analysis, static wire and grounding studies., • Develop detailed line designs including plans, profiles, cross-section details, and estimates., • Incorporate LiDAR and aerial survey data, as well as environmental considerations (wetlands, vernal pools, and sensitive areas) in design and routing., • Lead and oversee overall transmission line design for all capital projects., • Review and create transmission line plans and profile drawings using PLSCAD to comply with standards such as AVANGRID TM and NESC., • Plan and strategize line routing considering right-of-way, congestion, local permitting issues, and reliability optimization., • Conduct probability modeling, cost estimation, and other required technical analyses., • Collaborate with multidisciplinary teams to ensure project success and regulatory compliance. Qualifications & Requirements: • Bachelors degree in Engineering or Engineering Technology (Civil, Electrical, or related discipline)., • 35 years (or more) of experience in power system civil engineering, preferably with transmission lines., • Professional Engineer (PE) license preferred., • Strong knowledge of line design, routing strategies, and transmission standards., • Proficiency with engineering design software such as PLSCAD., • Ability to analyze environmental and structural constraints and incorporate them into project plans. What the Company Offers: • Competitive compensation with performance-based incentives., • Comprehensive benefits including health, dental, vision, life insurance, short- and long-term disability, HSA contributions, 401(k) with company match, PTO, and paid holidays., • Opportunities for career growth and professional development, including tuition reimbursement and job-related training programs., • Supportive work environment with exposure to complex, high-profile infrastructure projects. Ideal Candidate Profile: The ideal candidate is a highly motivated engineer with strong analytical and technical skills, experience in transmission line design, and the ability to manage projects from concept through execution. They are detail-oriented, collaborative, and capable of integrating environmental, structural, and regulatory considerations into practical, cost-effective engineering solutions. Jennifer Sampson Technical Recruiter ....................................................... DONATO TECHNOLOGIES, INC 12100 Ford Rd, #306, Dallas, TX 75234 Direct : (469)-342-0401 Email: Web:

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Sales Engineer II is responsible for elevating awareness of Stark's Compression core competencies and capabilities through active account management with assigned accounts to achieve revenue and profit targets. The Sales Engineer will work with management and peers on account management, sales strategies and goal achievement, project design, project bidding, project management, and pipeline management. What are we looking for: • Bachelor's Degree in engineering., • Five (5) years' experience in pumps and/or blower systems., • Five (5) years' experience in sales engineering., • A proven track record in account management., • Knowledge of of Food and Beverage, Dairy, Chemical/Petrochemical, and Pharmaceutical Industries. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. This is a base salary, and the position also includes eligibility for a variable sales bonus. There is potential for a sales start-up assistance program. Job Posted by ApplicantPro

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for an Electrical Design Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop the skills of the Design Engineer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer, Project Engineer, Group Manager, Associate and/or Principal., • Independently performs assignments after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • Assists in the preparation of contract documents., • Plans, schedules, conducts all phases of the work in a part of or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • Associate Degree, Bachelor of Science Degree, or equivalent combination of education and experience. Powered by JazzHR 68yl76RJqq

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities • Ability to motivate and mentor junior staff., • Project management, communication and multi-tasking skills., • Ability to work with internal and external staff on an individual and team basis., • Ability to challenge one’s self and broaden knowledge base., • Bachelor's of Science or Technology in Electrical Engineering, • 5-10 years of related experience, • PE preferred, FE required, • Experience with the National Electric Code., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash., • Experience with the layout and design of low voltage building distribution systems. *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Lead Protection & Control Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 10 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD, • IEC 61850/Goose experience required Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description Research Engineer Founded in 2017 and headquartered in Rochester, NY, REMADE℠ is a 170+ member public-private partnership funded in part by the U.S. Department of Energy’s Office of Advanced Materials and Manufacturing Technologies (AMMTO) with an initial investment of $140 million. REMADE is the only national institute focused entirely on developing innovative technologies to accelerate the U.S.’s transition to a Circular Economy. In partnership with industry, academia, trade organizations, and national laboratories, REMADE enables early-stage applied research and development that will create jobs, dramatically reduce embodied energy and greenhouse gas emissions, and increase the supply and use of recycled materials. For more information about REMADE (Reducing EMbodied Energy And Decreasing Emissions), visit . Position Summary The primary responsibility of this position is to support the development and administration of state grant programs that support the creation of technologies to expand the waste tire market and fund demonstration projects aimed at increasing the use of waste tires. This role is vital for driving innovation and fostering sustainable solutions for waste tire management throughout New York State and beyond. The successful candidate will play a major role in managing these grant programs, collaborate with stakeholders, and guide the development of both technology initiatives and demonstration projects focused on expanding the use of waste tires. In addition to managing the tire recycling program, the research engineer will support the broader mission of the Institute by fostering relationships with stakeholders in industry, academia, and government, conducting research on market trends, opportunities, and barriers to new technologies, assisting in the preparation of proposals for securing government or private funding, and contributing to other Institute initiatives as needed. This job is based in the Rochester, NY office. Salary Range: $75k to $90k Primary Responsibilities • Support the development and oversight of a state-funded grant program for waste tire management and the expansion of recycling markets. This includes designing and administering the grant application process, establishing criteria and evaluating proposals, and overseeing the selection and contracting of recipients., • Establish clear objectives, timelines, and milestones for grant recipients. Monitor progress and ensure that projects remain within scope, budget, and timeframe. Conduct site visits and inspections as necessary to evaluate project outcomes and compliance., • Provide technical expertise and guidance to applicants and stakeholders, ensuring that the proposed technologies or solutions meet industry needs and demonstrate feasibility, scalability, and sustainability., • Submit all necessary reporting to state and regulatory bodies. Ensure all activities comply with state laws, regulations, and grant guidelines., • Build strong relationships and promote engagement with stakeholders from industry, academia, and government agencies., • Promote knowledge sharing and best practices in the rubber and tire recycling industry., • Conduct online research to identify market trends, evaluate market opportunities and identify technical, economic, environmental and institutional barriers to the implementation and deployment of new technologies relevant to building a circular economy, • Assist in the preparation of proposals to obtain government and/or private funding of new projects or initiatives, • Experience in one of the following areas:, • Markets for recycled products, preferably rubber, • Technologies for tire recycling, • Rubber compound formulations and manufacturing processes, • Regulations governing waste tire disposal, • Familiarity with New York State businesses involved in tire disposal, recycling, and related activities, • Experience working with federal and/or state agencies, with a preference for candidates who have managed government-funded grant programs, • Project management experience with technical projects in a research environment preferred, • Capable of conducting technology assessments for new and emerging technologies using tools such as technoeconomic analysis, net energy analysis, Lifecyle analysis, and market opportunity analysis., • Benchmarking of new or emerging technology relative to the state-of-the-art, • Ability to systematically analyze complex, technology centric problems, identify technical, economic, market, and institutional barriers to the adoption of emerging technologies, and develop and implement effective solutions., • Strong verbal and written communication skills, and ability to convey complex information in a way that others can readily understand, • Strong attention to detail, ability to multi-task and work effectively in a fast-paced environment, • Grant/proposal writing experience a plus, • Bachelor’s Degree required in engineering or other technical related fieldThe REMADE Institute does not discriminate in the screening or submission of candidates on the basis of race, color, religion, sex, age, national origin, marital status, disability, or other protected status. All applicants must be U.S. citizens or lawful permanent residents Powered by JazzHR pIoDypAmPf

Job DescriptionSenior Substation Engineer Senior Substation Engineer Rochester, Syracuse, Binghamton, or NYC Description We are seeking a Senior Substation Engineer to join our growing team. The Senior Substation Engineer is required to work within a multi-discipline team to design efficient and reliable electrical substations. The engineer will coordinate his/her design activities to maintain project schedules and ensure successful project completion. The engineer will also assist the Estimating Team in preparation of estimates and project proposals. Aside from engineering duties, we are looking for the incumbent to be able to provide a presence to our area clients. We are looking for someone to be our "face" to the client. Significant client face time and interaction is required. A strong business sense would be beneficial. This position is accountable to provide design activities in accordance with applicable codes and standards, including our policies and procedures, such as Safety, Environmental, Quality Assurance and Quality Control. Specific duties include: • Prepare conceptual design of the complex projects, • Carry out/review/analyze complex technical studies and project scopes, • Preparation of project specifications for material and equipment purchase and installation., • Review the design based memorandum, detailed engineering scope and guide the assigned discipline engineers to align the engineering deliverables per project requirements., • Work closely with peers to ensure accurate delivery and thorough electrical design that will meet industry standards and specifications, and meet good engineering practices., • Design of electrical substation facilities including site and bus work layouts, ground grids, conduit layout, lightning protection, control house design, lighting studies, and metering., • Review of internal and external designs for code compliance, good design practice and constructability., • Resolving site queries, attending site meetings and performing site inspections during the construction phase of projects., • Maintaining complete project documentation with respect to substation design and construction, including all completion packages, as-built requirements and return data information., • Making and maintaining appropriate commitments to project teams and coordinating design activities with multi-disciplined project team members., • Maintaining good working relationships with internal groups that support projects., • Maintaining good working relationships with material suppliers, contractors, and any others that affect the quality, schedule and cost of projects., • Mentoring and providing guidance to developing engineers within the department., • Experience with Autodesk Inventor and Substation Design Suite (SDS) is a strong plus., • Experience with WinIGS and CYMCAP is preferred, • Strong client focus., • A degree Electrical Engineering from a recognized institution., • Professional Engineering (PE) License We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 05/27/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Energy who excels by transforming complex customer requirements into actionable, data-driven solutions across HVAC, controls, central plant optimization, and integrated energy systems. You lead projects from early concept through design, pricing, and performance validation-leveraging modeling, analytics, and real-world constructability insight to ensure every solution is technically sound, financially viable, and executable in the field. You collaborate seamlessly with Sales, Engineering, and Operations to protect margin, reduce risk, and deliver high-performance building outcomes. Through mentorship, strong communication, and technical leadership, you elevate both project delivery and overall team capability. What are we looking for • Associate degree required; Bachelor's preferred in engineering or related discipline., • 10+ years delivering building infrastructure, energy efficiency, or distributed energy resource projects., • Experience leading technical teams and managing cross-functional coordination., • Expert-level ability in energy modeling, building analytics, load studies, utility consumption analysis., • Deep understanding of HVAC systems, central plant optimization, and building automation controls., • Experience developing performance guarantees, feasibility studies, and detailed design documentation., • Familiarity with M&V practices and IPMVP protocols., • Skilled in evaluating engineering designs for constructability, cost, lifecycle value, and performance risk., • Proficiency with Microsoft Office; experience with industry software tools for modeling, analytics, and design., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionAs a member of our Professional Services team, you will assist in the building, deploying, and maintaining of critical customer applications. In this role, you will provide thought leadership and hands-on technical execution to optimize client environments and ensure robust, scalable applications. Responsible for:-Assisting in the designing and building modern and highly scalable cloud-based applications for customers-Migrating and modernizing customer legacy applications using AWS services-Working with Project Managers and clients to provide recommendations and technology roadmaps to meet their business needs-Actively participating in team meetings and cross-functional interactions-Keeping team members and supervisors informed of progress and issues-Actively contributing to client project status meetings-Contributing to R&D projects to validate/invalidate new services offerings-Remaining current with technology trends and new technologies-Proposing the latest technology usage and integration standards-Developing and managing backend infrastructure, APIs and integrations to support cloud-based solutions, using programming languages like Python, Java, and PHP-Participating in code reviews, document infrastructure-as-code, and assist with UI/UX-Building out frontend interfaces and dashboards for applications and infrastructure using languages like Angular and React-Utilizing best practices for security, compliance, and business continuity in cloud solutions How you will be successful:-Bridging the gap between technical complexity and business objectives through adept problem-solving abilities-Building trusting relationships with team members and collaborating departments-Comfortable with pushing boundaries and technical limits (maintain technical aptitude and knowledge of industry)-Confidently communicating with diverse stakeholders to translate requirements into impactful outcomes-Championing ongoing elevation of personal skills paired with knowledge transfer to teammates-Having the ability to rapidly learn new languages, frameworks, or business domains as needed to meet the diverse needs of multiple clients Requirements of the role:-5+ years’ experience as a cloud engineer with hands-on expertise across AWS cloud services-Strong experience with infrastructure-as-code tools like CloudFormation-Experience coding in multiple languages including Node.js, Python, Angular, React, .NET Core, .NET Framework-Experience using AWS platforms including but not limited to Cognito and Amplify-Understanding of modern app architectures in cloud environments-Able to collaborate with cloud engineer and project management teams-AWS Certification(s) a must have (can be obtained upon hire) - minimum requirement at 90 days is AWS Certified Developer Associates-In-depth experience with one or more programming languages like Java, JavaScript, Python, C# used for developing cloud-native applications.-Understanding of cloud computing concepts - IaaS, PaaS, serverless, containers etc.-Working knowledge of Amazon Web Services - key services like EC2, S3, Lambda, API Gateway, ECS, Fargate, RDS etc.-Experience using AWS command line tools and SDKs to manage infrastructure as code-Building, deploying, managing microservices applications on AWS-Working with AWS data storage solutions like DynamoDB, NoSQL, and Aurora RDS-Experience with containers & orchestration platforms like Docker, Kubernetes on AWS Security best practices for applications in the public cloud Additional Valuable Skills: -Experience with CI/CD pipelines and automated testing-Building event-driven architectures on cloud platform-Using infrastructure as code tools like CloudFormation -Frontend JavaScript frameworks like React-Machine learning capabilities like SageMaker-Leveraging serverless architectures where applicable The salary range provided is a general guideline. When extending an offer, Innovative considers factors including, but not limited to, the responsibilities of the specific role, market conditions, geographic location, as well as the candidate’s professional experience, key skills, and education/training. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We are currently looking for a Protection and Control Engineer with a minimum of 5 years of experience in protection and control system design, cost estimating, and bidding document preparation for commercial, industrial, generation and renewables. Typical system voltage levels range from 138 kV to 2.4kV. This position can be filled in any of our New York offices. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Design projects working directly with clients to develop project scope, identify problems, and propose solutions., • Typical requirements include Protection and Control drawings and documentations (relay one-lines, three-lines, AC/DC schematics, I/O lists, and relay settings, configuration files and etc), panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations), and other supporting documentation., • Comfortable evaluating the interoperability, control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as perform power system load flow studies, fault studies, relay setting coordination., • Aid in commissioning as needed pertaining to system startups and functional checks. Salary Range: $90,000 - $135,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • A BS in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bidding document preparation for electrical transmission and distribution substations projects., • A PE license from a US State is desired but not required., • Successful track record designing Protection and Control Systems., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards are used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Interest in low voltage coordination and arc flash studies. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently hiring a Structural Engineer to join our Building Engineering Division in our Rochester, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, large commercial, residential and other unique projects. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Perform complex design calculations for analysis and design of new and existing structural systems., • Prepare documents and reports from concept design through advanced technical design documentation., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Review shop drawings, respond to RFI’s and perform field observations during CA phase. Salary Range: $64,000 - $80,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor of Science degree in Civil or Structural Engineering is required. Coursework in building systems engineering required., • Master of Science degree in Structural Engineering is preferred., • 3 years minimum experience with concrete, steel, masonry, and/or wood design is required., • Working knowledge of AutoCAD, Revit and structural engineering design software (RISA, SAP, and/or TSD) is required., • EIT required., • Excellent verbal and written communication skills. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical project leader for the organization with the responsibility of expediting the process flow of jobs through the shop from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost-effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Minimum Qualifications: • Intermediate level professional, • Two years or more of professional experience in a manufacturing business environment, • Five years or more of manufacturing/sheet metal/welding fabrication knowledge, • CNC machining / programming background is a plus, • A.S. Degree in Engineering required; Manufacturing, Mechanical or Industrial Degree (B.S. preferred) Specific Duties: • Responsible for all phases of the quoting process including; developing a Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usage’s, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual job cost vs. quoted job cost, • Drive process improvements to generate cost reduction, • Help write the process sheets (Travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed Measurement Tools: • On time delivery to customers, • Quality performance, • Decrease in job setup time on turret, mills and lathes, • Cost savings for production; including tooling, • Project management and document control organization skills, • Have a “Team player attitude”, promote commitment and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Protection & Controls Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 7 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description The Sr. Water/Wastewater Engineer will work on water and wastewater treatment as well as distribution and collection of related projects. This individual will provide leadership and work closely with the water/wastewater design team and other discipline team members. The chosen candidate will be responsible for oversight of all technical aspects of a project, as well as administrative and management duties. The Engineer will be involved in business development activities such as responding to proposals and client outreach. Duties • Provide daily oversight and guidance to water/wastewater team, • Provide weekly scheduling of time for team members as well as review of weekly time sheets, • Prepare scopes of work, budget and monitor budgets throughout the entire project, • Seek out and pursue business development opportunities to further expand the group in targeted geographical regions of New York, • Establish relationships and teaming opportunities with W/MBE companies for given projects, • Provide assistance on developing design concepts and potential alternatives, • Provide QA/QC to produce effective and high-quality project documents (including reports, design drawings, and specifications), • Assist clients with construction procurement, • Support projects in construction, including office administration and field observation oversight, • Assist with water and wastewater operations and research, hydraulic/process modeling, environmental review, permitting, and project financing, • Become actively involved with local, state or national professional associations Salary Range: $100,000 - $130,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor’s Degree in Civil and/or Environmental Engineering, • Minimum of 10 years’ experience, • Professional Engineer license in New York State, • Track record of developing good working relationships with municipal, industrial, and/or institutional clients, • Project management and leadership experience on various sized projects, • Effective communication skills using oral, graphic and written forms, • Ability to travel to project sites and meet with operators to discuss technical matters, • Ability to manage multiple workloads and budgets Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Title Manufacturing Engineer Department Manufacturing Engineering Reports to Director of Production Engineering SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: As a Manufacturing Engineer, you’ll play a critical role in turning innovative designs into efficient, high‑quality production. You’ll optimize workflows, equipment layouts, and assembly methods to maximize throughput while ensuring products meet exacting standards. Working closely with engineering, production staff, and other manufacturing support personnel, you’ll lead the transition from prototype to volume manufacturing and drive continuous improvements that reduce costs, increase efficiency, and elevate performance. This role blends technical expertise with project leadership, making you a key force in shaping the future of our manufacturing operations. You will: • Lead manufacturing projects end‑to‑end — from planning and scope definition through execution and delivery., • Translate goals into actionable plans by defining tasks, resources, timelines, and success metrics., • Develop and manage detailed project schedules and budgets, ensuring milestones are met on time and within cost targets., • Coordinate cross‑functional teams to align priorities, resolve resource conflicts, and maintain accountability., • Monitor progress with the right tools, tracking deliverables and proactively addressing risks or roadblocks., • Partner with quality assurance to confirm specifications, documentation, and compliance before product release., • Communicate clearly with stakeholders, providing regular updates, reports, and solutions to challenges., • Implement process changes and improvements that enhance efficiency, reduce costs, and strengthen output quality., • Evaluate project outcomes to capture lessons learned and drive continuous improvement across manufacturing operations. You have: • Bachelor’s degree in mechanical, Manufacturing, Industrial, Optical, or Aerospace Engineering from an ABET‑accredited program (other closely related engineering disciplines may be considered)., • 3-5 years of experience in manufacturing engineering, preferably in optics or precision manufacturing., • Strong proficiency in Geometric Dimensioning & Tolerancing (GD&T) methods., • Hands‑on experience with 3D modeling software; SolidWorks strongly preferred., • Advanced skills in Microsoft Excel for data analysis and reporting; familiarity with MS Access is a plus., • Proven ability to read, analyze, and interpret complex technical documents and specifications., • Excellent communication skills with the ability to collaborate effectively across engineering, production, and management teams., • Background in optical assembly processes and precision manufacturing techniques a plus. You are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous vacation and sick-time. Work Requirements & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift: 2pm - 10:30pm Before the transition to B shift, this role will train on A shift for up to 8 weeks. A Shift Schedule: 7am - 3:30pm

Job DescriptionSalary: $55,000-$65,000 Per Year About the Role The successful candidate will work with multidiscipline teams on a wide range of building projects providing structural design and analysis. As a Junior Engineer you will work under a licensed Professional engineer to complete a variety of project tasks. Assignments will include design and analysis, structural modeling and drafting, detailing, construction administration services, structural inspections, and technical report writing. The position requires knowledge of structural engineering principles and mathematical skills. Experience with structural design software such as STAAD or Ram as well familiarity with Revit and AutoCAD are required. The ability to coordinate and communicate clearly with team members is vital, with additional emphasis on organization and attention to detail. The candidate will have an integral role in the design and production of constructable drawings for a multitude of successful projects. Qualifications • Understanding of structural engineering principles related to the design of buildings, • Complete structural analysis for steel, concrete, masonry, and wood, • Review and understand design codes such as Building Code of New York State, International Building Code, ASCE-07, AISC, and ACI, • Team and support cross-discipline colleagues per direction of project leads, • Take initiative, problem solve, and be excited to learn on a daily basis, • Effectively communicate through oral, written, and visual means with project teams, • Bachelor of Science or Engineering in Civil Engineering is required. An emphasis on Structural Engineering or Masters in Structural Engineering is a plus, • 2-5 Year of Experience, • EIT License, or ability and desire to obtain EIT is encouraged, • Desire and willingness to learn Benefits • Holidays, • PTO, • Health Insurance, • FSA/ HSA, • Life Insurance, • 401(K) plan, • Continuing Education Support About HUNT HUNT is a full-service A/E Firm with offices located in Albany, NY, Binghamton, NY, Horseheads, NY, Rochester, NY, and Towanda, PA. As a firm, our vision is to build vibrant communities by empowering creativity and partnership. We have accomplished this to date by being an entrusted partner to our clients/communities, providing full-service design that is innovative, practical and community focused. In addition, we offer a family friendly, flexible workplace that aims to encourage long, successful, sustainable careers through a variety of life stages. We are excited to welcome you to apply to this strong culture and hope that your values align with those of the firm, which will further enhance our culture even as we look toward targeted growth opportunities. HUNT is an Equal Opportunity Employer (EOE). Salary commensurate with experience and qualifications.

Job DescriptionGas Project Engineer Pay Range: $70,000-85,000 Annually DDS Engineering and Surveying, LLP (DDSE), is an experienced and highly qualified natural gas/civil engineering, permitting and survey firm that has been performing consulting engineering and construction services in the natural gas industry for many years. We currently perform these engineering services related to natural gas transmission, distribution main design, station design (M&R, gate stations, and regulator stations) and customer services (residential and commercial) for a variety of natural gas customers throughout the Northeast. Our dynamic team is comprised of experienced natural gas engineers, civil and mechanical engineers, surveyors, gas construction personnel as well as in-house staff expertise in the areas of legal, compliance, and safety. This is an office-based position and can work out of any of our three Engineering Offices located in Rochester, NY, Canonsburg, PA, or Southborough, MA. We are seeking talented and highly motivated individuals to be part of our team. Benefits: • Health, Dental, and Vision Plans, • 401K with match, • Paid Time Off (PTO), • Life and AD&D coverage, • Short and Long-Term Disability, • HSA and or FSA Accounts, • Comprehensive Training ProgramsThe Gas Project Engineer is responsible for contributing to all phases of civil engineering for natural gas infrastructure projects. This can include Pipeline or Facilities related projects. Will manage the design, engineering, permitting and approvals necessary for all projects. This Engineer may be expected to perform field-based activities as necessary. Skills and Experience Required: • 2-5 years related experience in natural gas or utility design., • Hands on experience with AutoCAD, Microsoft Word, and Excel, • Self-starter, highly motivated, team player with strong organizational and communication skills, • Ability to interact with clients, customers, officials, contractors, and other staff., • Bachelor’s degree in an engineering related field or substantial equivalent experience.Preferred:, • Local, County, and State related permitting, • Prior land development engineering or design experience would be a plus, but not required., • EIT (Engineering in Training) certification.Why Join Our Team:, • Competitive compensation and benefits package., • Opportunities for career growth and development., • Commitment to safety and a positive work environment., • Join a dynamic team dedicated to excellence in our industry.DDS is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law. Revised: 01/17/2024 Powered by JazzHR dwZBJLZnRt

Job DescriptionSalary: $75,000 - $125,000 Per Year About the Role This leadership role within our MEP team will drive the design and management of electrical engineering projects, ensuring the successful execution of power distribution, lighting, and low-voltage systems across a variety of sectors. The Senior Electrical Engineer will provide technical oversight, mentorship, and strategic guidance, working closely with clients, internal teams, and stakeholders to deliver high-quality, sustainable solutions. Key Responsibilities • Lead and manage electrical engineering projects from concept through completion., • Develop power distribution, lighting, emergency, and communication systems for municipal, K-12, university, and industrial buildings., • Perform advanced system analysis, including load calculations, short-circuit analysis, arc flash studies, and coordination studies., • Select and specify electrical distribution equipment, lighting systems, and controls., • Oversee and guide the development of electrical construction drawings using AutoCAD and Revit., • Ensure all designs comply with NFPA, NEC, energy codes, and other relevant standards., • Mentor and support junior and mid-level engineers, fostering a culture of professional growth., • Collaborate directly with clients, architects, and project managers to develop innovative, cost-effective solutions., • Participate in business development efforts, including proposal writing and client presentations., • Prepare and review technical reports, engineering specifications, and cost estimates., • Conduct site visits and inspections to assess existing conditions and support construction administration. Qualifications • 10+ years of experience in electrical engineering, power distribution, or a related field., • Bachelors degree in Electrical Engineering required., • Professional Engineer (PE) license required or ability to obtain one within one year., • Proficiency in electrical design software, including AutoCAD, Revit, and power analysis tools (such as SKM, ETAP, or EasyPower)., • Proven experience leading projects, managing budgets, and mentoring junior staff., • Strong leadership, communication, and problem-solving skills, with the ability to interface with diverse teams and clients., • Deep understanding of electrical systems, industry codes, and sustainable design practices. Benefits • Holidays, • PTO, • Health Insurance, • FSA/ HSA, • Life Insurance, • 401(K) plan, • Continuing Education Support About HUNT HUNT is a full-service A/E Firm with offices located in Albany, NY, Binghamton, NY, Horseheads, NY, Rochester, NY, Towanda, PA, and Williamsport, PA. As a firm, our vision is to build vibrant communities by empowering creativity and partnership. We have accomplished this to date by being an entrusted partner to our clients/communities, providing full-service design that is innovative, practical and community focused. In addition, we offer a family friendly, flexible workplace that aims to encourage long, successful, sustainable careers through a variety of life stages. We are excited to welcome you to apply to this strong culture and hope that your values align with those of the firm, which will further enhance our culture even as we look toward targeted growth opportunities. HUNT is an Equal Opportunity Employer (EOE). Salary commensurate with experience and qualifications.

Job DescriptionSalary: $75,000 - $125,000 Per Year About the Role This leadership role within our MEP team will drive the design and management of mechanical engineering projects, ensuring the successful execution of HVAC, plumbing, and fire protection systems across a variety of sectors. The Senior Mechanical Engineer will provide technical oversight, mentorship, and strategic guidance, working closely with clients, internal teams, and stakeholders to deliver high-quality, sustainable solutions. Key Responsibilities • Lead and manage mechanical engineering projects from concept through completion., • Develop HVAC, plumbing, and fire protection systems for municipal, K-12, university, and industrial buildings., • Perform load calculations, energy modeling, and system analysis to ensure efficiency and sustainability., • Select and specify mechanical equipment, including boilers, chillers, air handling units, and pumps., • Oversee and guide the development of mechanical construction drawings using AutoCAD and Revit., • Ensure all designs comply with ASHRAE standards, building codes, energy codes, and industry best practices., • Mentor and support junior and mid-level engineers, fostering a culture of professional growth., • Collaborate directly with clients, architects, and project managers to develop innovative, cost-effective solutions., • Participate in business development efforts, including proposal writing and client presentations., • Prepare and review technical reports, engineering specifications, and cost estimates., • Conduct site visits and inspections to assess existing conditions and support construction administration. Qualifications • 10+ years of experience in mechanical engineering, HVAC design, or a related field., • Bachelors degree in Mechanical Engineering required., • Professional Engineer (PE) license required or ability to obtain one within one year., • Proficiency in mechanical design software, including AutoCAD, Revit, and energy modeling tools (such as Trace 700, HAP, or EnergyPlus)., • Proven experience leading projects, managing budgets, and mentoring junior staff., • Strong leadership, communication, and problem-solving skills, with the ability to interface with diverse teams and clients., • Deep understanding of HVAC systems, plumbing design, energy efficiency, and sustainable design practices. Benefits • Holidays, • PTO, • Health Insurance, • FSA/ HSA, • Life Insurance, • 401(K) plan, • Continuing Education Support About HUNT HUNT is a full-service A/E Firm with offices located in Albany, NY, Binghamton, NY, Horseheads, NY, Rochester, NY, Towanda, PA, and Williamsport, PA. As a firm, our vision is to build vibrant communities by empowering creativity and partnership. We have accomplished this to date by being an entrusted partner to our clients/communities, providing full-service design that is innovative, practical and community focused. In addition, we offer a family friendly, flexible workplace that aims to encourage long, successful, sustainable careers through a variety of life stages. We are excited to welcome you to apply to this strong culture and hope that your values align with those of the firm, which will further enhance our culture even as we look toward targeted growth opportunities. HUNT is an Equal Opportunity Employer (EOE). Salary commensurate with experience and qualifications.

Job Description * • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Principal, Associate or Project Manager to finalize Project Scope and Schedule of deliverables and understands priorities identified., • In addition to duties of project engineer/project designer, applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies and follows projects through program, schematic, design development, construction document, bidding and construction phases., • Supervises, coordinates and reviews work, schedules and assigns work to meet completion dates., • Develops reports, studies, and system analysis., • Works in an efficient an effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts client directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs and schedules and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR xGl7fjJRvB

Job Description Overview CTG's long-standing Fortune 500 client of over 15 years has a W2 contract assignment for a Quality Engineer II. Type: Contract Job Title: Quality Engineer II Location: Woodland, CA Candidates must be able to commute and work onsite in Woodland, CA Pay Rate: $44.43 to $58.24/hour Work Hours: M–F 8am–5pm Education: Bachelor’s degree in Science, Engineering, Bioengineering, or related field (Chemistry or Biology preferred) Description The Quality Engineer II will develop and support all Quality Management System (QMS) and Regulatory Affairs (RA) activities in alignment with site quality goals and metrics. This role is responsible for new product setup, quality project management, and ensuring regulatory compliance for serum products. The position will ensure compliance with in-house and external specifications and standards such as cGMPs, 21 CFR 820, ISO 13485, and Quality System Procedures. Requirements • Ensure compliance with new and changing regulations impacting products and processes, including QSR’s and global import/export regulations, • Manage new product setup and related projects, • Support supplier audits as needed, • Collaborate with USDA on regulatory compliance, including approvals, import/export compliance, traceability, quarantine, safety testing, and affidavits, • Serve as a resource for customer regulatory and technical inquiries, • Maintain ISO 13485-based quality system, • Implement and manage CAPA (Corrective and Preventive Actions) and problem resolution, • Lead quality documentation, nonconformance reports, inspection activities, and product disposition, • Review and revise procedures, specifications, and forms to maintain and improve the QMS, • Act as the Quality Help Desk and customer complaint contact for problem resolution, questionnaires, certificates, and surveys, • Perform internal audits in support of internal requirements, 21 CFR 820, and ISO 13485 compliance, • Represent the organization in customer quality audits, supplier quality audits, and regulatory inspections, • Conduct investigations and analyses to resolve quality issues, • Collaborate with cross-functional teams to support quality system implementation, • Create new product master files to meet customer and quality system requirements, • Ensure compliance with company policies and departmental procedures, including product performance verification, problem investigation, process improvements, and non-conformance prevention, • Provide training on quality systems and applicable regulations, • Track and trend QMS metrics, • Perform other duties as assigned Required Qualifications Education • Bachelor’s degree in Science, Engineering, Bioengineering, or related field (Chemistry or Biology preferred) Qualifications • Minimum 3 years’ experience in Quality or Regulatory, preferably in medical device, pharmaceutical, or biotechnology industries, • Strong knowledge and application of Quality Systems Regulations 21 CFR 820 and ISO 13485, • Ability to develop, update, and train on SOPs, • Experience performing internal/external audits, • Ability to monitor QMS activities, including Change Control, CAPA, Complaints, and Nonconforming Materials/Products, • Problem-solving skills for investigations and root cause analysis, • Experience with Continuous Improvement, Lean, or Six Sigma Desired Qualifications • SAP, EtQ, and/or PeopleSoft experience, • Statistical analysis experience, • Project management experience, • Knowledge of animal by-product import/export regulations, • Background in animal health, virology, immunology, or epidemiology Soft Skills • Strong organizational, time management, and attention to detail skills, • Excellent interpersonal and communication abilities, • Ability to work independently and influence others in a collaborative team environment Additional Information • No third party resumes will be accepted, • Drug testing and/or other employment-related inquiries may be conducted, • CTG will consider for employment-qualified applicants with criminal histories in a manner consistent with the requirements of all applicable local, state, and federal laws, • All interested individuals MUST be able to work on a W2 Tax basis (no C2C or third party vendors), • CTG is an Equal Employment Opportunity employer, • CTG is an E-Verify Company To be considered for this opportunity, please apply directly through our website by clicking the link below or email your Word version resume and salary expectations to . The expected base salary for this position ranges from $44.43 to $58.24/hour. Salary offers are based on relevant skills, training, experience, education, market factors, and applicable licensure or certifications. In addition to salary, a competitive benefits package is offered.

Job DescriptionDescription Challenging Bridge Projects. Grow your Career. Build the Future. Are you a skilled bridge engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Bridge Engineer to join our Western New York Transportation Department and help us deliver some of the largest and most complicated infrastructure projects in Upstate New York. Our Western New York Bridge team is expanding, and we’re excited to offer you the opportunity to be part of the largest bridge program in our team's history. With active projects in nearly every county across the region, you'll play a key role in shaping critical infrastructure. This unprecedented workload not only brings meaningful technical challenges to keep you engaged and learning, but also opens the door to unlimited career growth. If you're looking to make a real impact while advancing your professional journey, there's never been a better time to join us. In this role, you’ll support bridge engineering projects from initial planning and design through construction support. Working under the guidance of senior engineers, you’ll contribute to structural analyses, prepare design documents, and assist with field inspections. You’ll bring a strong foundation in civil or structural engineering, a willingness to learn, and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the most impactful infrastructure efforts in Upstate New York: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Bridge Design: Work on every aspect of bridge design projects, including inspection, structural calculations, geometry layout, plan development, and construction coordination., • Project Development: Assist in progressing bridge projects through the design process, including report writing, environmental permit coordination, and development of contract specifications., • Bachelor’s degree in Civil Engineering or a related field., • 0-5 years of experience in bridge design, • Proficiency in AutoCAD/Civil 3D and/or MicroStation/OpenRoads Estimated Salary Range: $73,424 - $104,624* Benefits: Comprehensive health, dental, and vision insurance, life and disability coverage, accident and critical illness insurance, flexible spending accounts, 401(k) plan with company match, generous paid time off (PTO), flexible/hybrid scheduling, tuition reimbursement, employee assistance program (EAP), wellness programs, parental leave, professional development opportunities, employee discounts, and referral program. For more detailed information, please visit C&S Comprehensive Benefits. WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description We are in search of a capable candidate to play a key role in a broad spectrum of projects, encompassing everything from large utility infrastructure projects and athletic fields to land development work and higher education facilities. This dynamic position involves direct engagement with clients in the public sector, offering the candidate a valuable opportunity to interact directly with them. The role requires versatility, as the candidate will contribute to projects with diverse scopes, showcasing their ability to navigate challenges across various disciplines. Duties • Plan and design large scale infrastructure, land development and athletic field projects., • Oversee and guide projects from initial concept through construction closeout., • Mentor and lead project team and direct reports, • Perform and review detailed hydraulic calculations., • Produce effective and high-quality project documents (including reports, drawings, and specifications), • Provide bidding and construction administration services., • Assist in the preparation of project proposals., • Communicate directly with and maintain client relationships. Salary Range: $65,000 - $90,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor’s Degree in Civil and/or Environmental Engineering, • 5+- years’ experience, • Registered as a Professional Engineer or ability to obtain license within 1-yr, • Track record of developing good working relationships with municipal, industrial, and/or institutional clients, • Effective communication skills using oral, graphic and written forms, • Ability to perform assigned tasks with minimal supervision, • Ability to travel to project sites and work remotely as needed, • Ability to manage workload and budgets as allocated Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook. $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionM/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for a Plumbing/Fire Protection Design Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop skills of Project Engineer/Designer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer/Designer, Project Engineer/Designer, Group Manager, Associates and or Principal., • Performs assignments independently after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • In addition to duties of CAD Operator., • Assists in the preparation of contract documents., • Plans, schedules, and conducts all phases of the work in a part of or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • May supervise or coordinates the work of CAD Operators., • Associate degree, bachelor's degree, or equivalent combination of experience and education., • CAD (Revit) experience preferred. Compensation Range Powered by JazzHR TGfMy1I5Wk

Job Description Javlyn Process Systems a member of Krones Process Group North America is seeking a skilled Electrical Controls Engineer to develop, design, and implement electrical and automation systems for liquid processing facilities. The ideal candidate will have a strong background in industrial control systems, electrical schematics, and process automation specific to fluid handling systems. Javlyn Process Systems is a process engineering and control system integration company employing degreed Computer, Electrical, Chemical, and Mechanical engineers. Our focus is on providing automated process system solutions for the food, beverage, dairy, and pharmaceutical industries. We fulfill a niche within these industries by offering custom solutions and professional services to design and operate manufacturing facilities under optimal conditions. We are a subsidiary of Krones AG, an international firm with over 20,000 employees worldwide. Key Responsibilities: • Electrical Design & Documentation, • Develop detailed electrical design packages including control panel layouts, wiring, • diagrams/schematics and I/O lists., • Develop Motor Control Center designs and layouts., • Select and specify electrical components (PLC I/O, Safety Equipment, VFDs, Enclosures,, • etc.) suitable for liquid processing environments., • Ensure compliance with industry standards., • Process Integration, • Collaborate with process engineers to integrate control systems with pumps, valves and field instrumentation that measure temperatures, flows, pressures, levels, etc., • Project Execution & Support, • Participate in cost estimating., • Lead electrical checkout efforts at control panel fabrication shops., • 5 to 15 years of experience in electrical and automation design, preferably in the liquid processing industry (e.g., dairy, food, brewing, chemical, etc)., • Experience designing control systems with PLC’s, • Proficiency with AutoCAD and/or AutoCAD Electrical., • Proficiency with Microsoft Word and Excel., • Knowledge of applicable electrical codes and standards., • Degree or diploma in Electrical Engineering, Automation, or related field., • Familiarity with process instrumentation., • Combination of office-based design work and field/site visits. Travel (20-25%) throughout the U.S. is required. The amount of travel varies based on project assignments, project location, and level of responsibility.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Mechanical who excels by transforming mechanical system requirements into high-performance, energy-efficient, and fully integrated building solutions. You lead projects from conceptual design through construction support and commissioning, applying deep technical expertise in HVAC, hydronics, central plant systems, and air distribution to ensure every design is safe, code-compliant, and optimized for long-term reliability. You thrive at bridging early pre-construction solutioning with detailed engineering and field execution-collaborating across mechanical, electrical, structural, controls, and architectural teams to deliver systems that perform as designed in the real world. Through technical leadership, clear communication, and mentorship of engineering and design staff, you elevate project quality, improve constructability, reduce risk, and strengthen Stark Tech's reputation for delivering high-performance mechanical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in mechanical building systems or energy-driven infrastructure projects., • Proven experience leading projects and managing engineering or cross-functional teams., • Expertise in HVAC system design, load calculations, equipment selection, air and fluid distribution, and central plant systems., • Experience defining sequences of operation and integrating mechanical systems with BAS platforms., • Proven ability to conduct system retrofits, upgrades, and performance optimization analyses., • Thorough knowledge of applicable codes, safety standards, and environmental/regulatory considerations., • Skilled in creating Basis of Design documents, narratives, specifications, and construction documentation., • Experience coordinating mechanical designs with electrical, structural, controls, and architectural teams., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Position:Manufacturing/Production Engineer Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Manage engineering and project management effort for the company. This includes scheduling and completing engineering tasks on time and within budget. Administer Engineering document control. Supervise, mentor and train subordinates. Communicate with customers and production to ensure conforming product. Plan and allocate jobs. Resolve conflicts to meet deadlines. Minimum Qualifications: • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Proven record of strong leadership and motivational skills coupled with sound decision making capabilities, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word and Excel, • Strong knowledge of best practices, methods and techniques pertaining to building, facilities and equipment maintenance and repair, • A minimum of five years relevant experience, • Degree in Mechanical Engineering or other related field required Supervisory Specific Duties: • Voice all concerns while working with production staff, Quality Assurance, Engineering and Operations any and all current or potential problems affecting production., • Review all new project release packages to verify that customers’ specifications are achievable., • Participate in new product launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures., • Recommend continuous improvements actions for improving work processes. Departmental Specific Duties: • Quoting/Cost Estimating including; developing a Bill of Materials (BOM) for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Responsible for developing the manufacturing process for all parts. Assist operators with questions and provide technical advice., • Work with Production to improve efficiency on new and existing jobs, • Drive process improvements to generate cost reduction ideas., • Monitor actual job cost vs quoted job cost, • Help write the process sheets (travelers) for each job, • Analyze and improve processes for time/cost efficiencies, • Establish and maintain “machine utilization status”, • Help to create new travelers and/or modify existing travelers as per post program evaluation meetings, • Design machining, welding, inspection and assembly fixtures, • Help provide technical direction to operators as needed, • Supervise tools, fixtures, etc. if need, • Maintain engineering drawing and program files, • Must collaborate with customers to achieve desired results, • Provide engineering support to meet production schedules This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Responsibilities: • Collaborate with project managers, landscape architects, and other stakeholders to develop project plans, specifications, and schedules., • Conduct site investigations and surveys to assess project feasibility and identify potential challenges., • Prepare detailed engineering designs, drawings, and calculations using AutoCAD, Civil 3D, and other software., • Coordinate with contractors, subcontractors, and project owner for construction projects., • Conduct quality assurance and quality control checks to ensure compliance with design standards, specifications, and regulations., • Prepare and submit permit applications, environmental assessments, and other regulatory documents as required., • Provide technical guidance and support to junior engineers, technicians, and other team members. Qualifications: • Bachelor's degree in civil engineering or related field, • Professional Engineer (PE) license in the state of New York, preferred but not required, • Minimum of 5 years of experience in civil engineering, with a focus on project design, • Proficiency in AutoCAD, Civil 3D, Microsoft Office Suite, and other engineering software., • Strong understanding of civil engineering principles, construction methods, and regulatory requirements., • Excellent communication, leadership, and problem-solving skills., • Ability to work independently, prioritize tasks, and meet deadlines in a fast-paced environment. Company DescriptionVisit our website to learn more about our company. our website to learn more about our company.