Quality control jobs in Tampa, Florida - Page 4Create job alerts

Job Description Dexis is a dynamic professional services firm dedicated to partnering with government and community leaders both in the U.S. and internationally to achieve critical social outcomes in a rapidly changing world. At Dexis, you will experience a corporate culture of inclusiveness, respect, fairness, and trust. You will be given the means and mentorship needed to succeed, and your creativity will be rewarded. About the Position Dexis is seeking up to two Senior Programmers to provide the J8-S with high quality, defendable programming and technical support. The Senior Programmer works as an interface between the programmers and the subject matter experts to ensure that models developed fully and accurately translate and represent the special operations capabilities. They will be responsible for day to day management of programming efforts and ensure new hardware requirements, IT maintenance requirements, and software upgrades are articulated to the Task Lead. The Senior Programmer will assist the task lead in developing work plans for programmers, database administrator, and network manager, and will keep the Task Lead appraised of information technology resources necessary to complete tasks in accordance with scheduled milestones and budgetary constraints. They will perform quality checks of all programming products and interact continually with the Task Lead to discuss concerns, and ensure total product/service satisfaction. The mission of the USSOCOM J8-S is to provide senior leadership independent analysis and studies involving current and future Special Operations Force (SOF) requirements, inform J8 decisions in development of the USSOCOM Program Objective Memorandum (POM), and inform and collaborate with Office of the Secretary of War (OSW) in developing various analytic products and guidance. Additionally, the division plays a key role providing reliable analytic tools and products enabling the Command's senior leaders to make informed and defendable resourcing decisions. Additionally, the J8-S provides a wide range of analytic support to the headquarters; the analytic support provided by the J8-S team has wide reaching impact on component commands, Theater Special Operations Commands (TSOCs), the Joint Staff (JS), and OSW. This full-time position is located in the Tampa area and is required to be on-site full time, subject to change if requirements shift. This position is contingent upon contract award. Responsibilities • Provide Senior-level programmers the requisite skills to accomplish programming and development tasks to support the J8., • Perform duties as Baseline and Privileged Use Certified Information Assurance Technical (IAT) Level II in accordance with DoW 8570.01-M, DOW Instruction 8140.01, USSOCOM Manual 380-3, and the SIE OPORD., • Oversee development of software coded solutions, to include: modeling and simulations, spreadsheets, data entry, web, geographic information systems (GIS) and database efforts to support requests for data., • Provide technical expertise with regards to hardware requirements and software modeling/coding efforts, • Complete software programming, bug fixes, and integration activities, • Primary developer/integrator for JMA models (SCRAAM, and SOFAMS) and tools (including Leveler/Grapher, Reporter, Date Movement Tool, Scenario Grouper, Resource Set Shaper, Scenario Disengagement Tool, and the Scenario Pass and Priority Tool)., • Oversee coding and integration of contractor developed new software models and tools., • Oversee and assemble model documentation., • Liaison with the Database Administrator, and Network Systems Engineer for software design, database design, hardware configurations and communication requirements., • Maintain software and data on the system including SOFAMS and associated databases, SCRAAM, the Special Operations Forces Ammunition Requirement Model (SOFARM), SOF Logistics Model, and other analytic products., • Support the Development Network through continuous software development to include testing and refinement of models and tools., • Modify/develop/train on the use of software to meet USSOCOM modeling software requirements as required., • Act as the software application administrator for software residing on the JMA LAN, for software residing on J8-S desktop computers used to collect and analyze JMA data, and for any required Commercial Off-The-Shelf (COTS) software. This includes databases containing climatic, threat, environmental, and weapon system performance data (friendly and hostile); data input forms, digital mapping systems used for data input, extraction, and display; quality control tools for examining the database entries; and the software that utilizes the JMA database., • Install, test and maintain software upgrades when provided and/or directed by the Government, to include periodic version upgrades to correct problems, improve efficiency and usability, and/or provide greater capability., • Interface with the Global Force Management (GFM) and the GSOS process to determine model requirements (inputs), manage data fidelity, analyze results; and develop model products. Develop software tools; maintain the database, and design model products and web-based interfaces., • Provide a continuously updated version of SOFAMS as the primary software model that tracks requirements. Provide the J8-S the software for each functional SOA to enter CONOPs in all mission areas (Special Forces, Ranger, MARSOC, NSW, MISO, CAO, ARSOAC & AFSOC)., • Provide and maintain a Leveler Module compatible with the SOFAMS software to track and illustrate all requirements entered using the SOFAMS software., • Maintain and provide continuous upgrades to the SCRAAM model to match time-based resources to requirements constrained by user-developed rules., • Provide development and maintenance capability to maintain the stand-alone network crucial to the mission of the J8-S that is configured to operate models simultaneously, multiple databases and support the variety of analysis required of the J8-S., • Evaluate and make recommendations on new hardware and software with the objective of increasing efficiency, productivity, accuracy, and integration within the JMA system., • Evaluate and make recommendations on the impact of new or emerging technologies on SOF capability assessments, analyses, and processes using JMA data, data from other approved databases, historical data, models, and analytic tools whenever possible to ensure the integrity of methodologies and the continuity of relevant analytic processes throughout the command., • Provide insights and recommendations regarding potential new technology needs that have been derived from the JMA SOFAMS or as a result of JMA related analyses. This support shall include the critical evaluation of existing methodologies, processes, models and analytic tools as well as new commercial and Government-owned software and models. All contractor proposed changes to any part of the Network Suite System must be approved by J8-S., • Use the latest database design and support methodologies to enhance retrieval of stored data and to ensure the fastest retrieval speeds and higher operating efficiencies., • Re-evaluate the database structure during the production phase of the JMA cycle and make recommendation to determine where improvements could be made., • Evaluate, integrate, install, test and maintain new software components to increase the reliability and efficiency of the JMA databases., • Ensure analysts can enter data, define data queries, and use analytic tools to examine and analyze the results. Create on-line tutorials and help files, commercially available programmed instruction, self-paced manuals and drill tasks, and manuals requiring instructor interface., • Work as an interface between the programmers and the subject matter experts to ensure that models developed fully and accurately translate and represent the special operations capabilities, • Be responsible for day to day management of programming efforts and ensure new hardware requirements IT maintenance requirements, and software upgrades are articulated to the Task Lead., • Assist the task lead in developing work plans for programmers, database administrator, and network manager., • Keep the Task Lead appraised of information technology resources necessary to complete tasks in accordance with scheduled milestones and budgetary constraints., • Perform quality checks of all programming products and interact continually Task Lead to discuss concerns, and ensure total product/service satisfaction.Qualifications, • Bachelor's Degree in Computer Science, Management Information Systems or related Information Technology discipline, • 10+ years of development experience in a role as Programmer/Analyst, Senior Programmer or Application Developer. Experiences shall include:, • Systems Analysis and Design, Systems Architecture or Data Modeling, • RDBMS and/or NoSQL/Non-relational database development, to include the writing of advanced queries and stored procedures, • Development of various COTS/GOTS software applications and solutions using various development languages or frameworks such as: .Net/JAVA/JavaScript/Python/R, • 2 years of experience (can be concurrent with the 10 years above) performing the role of Lead Developer and/or Data Architect., • Baseline and Privileged Use Certified Information Assurance Technical (IAT) Level I; IAT Level II must be obtained within 6 months of start date If you are passionate about this opportunity, apply now! Only those applicants who meet the above criteria will be contacted for interview. Dexis is an Equal Opportunity Employer, and does not discriminate on the basis of race, color, sex, national origin, religion, pregnancy, disability, age, genetic information, military service, veteran status, ethnicity, citizenship, sexual orientation, gender identity, marital status, childbirth and related medical conditions, including lactation, or any other protected class under applicable law. As part of a competitive benefits package for eligible employees, Dexis provides healthcare insurance in addition to other staff welfare benefits and perks.

Job Description Title: Safety and Quality Manager Reports to: Head of Aircraft Integration Center Work Arrangement: Onsite Company Overview Metrea delivers effects-as-a-service to national security partners across five domains and more than a dozen mission areas—including airborne ISR, electronic warfare, secure communications, aerial refueling, special mission aviation, aerial firefighting, and advanced simulation. Wherever we operate, we build vertically integrated full stacks of capability—designing, building, and operating turnkey solutions that let customers scale capacity while benefiting from continuous cycles of innovation. With operators and engineers under one roof, we close the gap between lab and field—what we call connecting design with effect. Metrea’s solutions are built for elegance: effective, efficient, and evolving. This approach enables our partners to do more with less and achieve outsized, asymmetric advantage against rapidly evolving threats. Headquartered in Washington, DC, Metrea has facilities across the United States, the United Kingdom, Europe, and beyond. Aerospace Engineering Group (AERO) provides an integrated, end-to-end capability for the rapid modification and fielding of mission-specific aircraft. The Airborne Asset Adaptation (A3) Cell acts as the central command and coordination hub, managing requirements and external interfaces from inception to operational delivery. Specialized technical execution is delivered by the Aircraft Integration Centre (AIC), a Part 145 facility focused on airframe modification, and Aerospace Design (ASD), which provides organic design engineering and FAA-authorized certification. Collectively, these elements bridge the gap between initial requirements and the deployment of flight-certified, mission-ready assets. Position Summary In this role, you will be the senior authority for quality, safety, and operational compliance within Metrea’s Aircraft Integration Centre (AIC) at Tampa International Airport. You will be responsible for ensuring that all aircraft modification, integration, and maintenance activities are delivered compliantly, safely, and with disciplined execution. You will own and mature the AIC Quality Management System (QMS) and be accountable for implementing, maintaining, and continuously improving the AIC Safety Management System (SMS), in line with direction and governance set by the Metrea enterprise SMS. Operating within a Part 145 and applicable Part 21 environment, you will ensure regulatory compliance, effective risk management, and continuous improvement across all AIC activities. In line with the Metrea Integrated Management System (IMS), you will also act as the AIC’s Operational Compliance Management Representative (OCMR). In this capacity, you will provide independent assurance that the AIC operates within its regulatory approvals, customer requirements, and internal processes, and that compliance performance is monitored, reported, and escalated through the IMS. You will be successful if you can balance independent oversight with practical delivery, embed safety and quality into day‑to‑day engineering and production activity, and provide clear, trusted advice to leadership in a fast‑moving aircraft modification environment. What You’ll Do Own, maintain, and continuously improve the AIC Quality Management System (QMS), ensuring compliance with FAA Part 145, applicable Part 21 requirements, customer contracts, and Metrea standards. Serve as the primary authority for quality assurance objectives and activities within the AIC. Implement, manage, and continually improve the AIC Safety Management System, aligned with the Metrea enterprise SMS and ICAO Annex 19 principles, tailored to a maintenance and modification environment. Act as the AIC’s independent focal point for quality, safety, and operational compliance matters across maintenance, modification, integration, and ground operations. Fulfil the role of Operational Compliance Management Representative (OCMR) for the AIC, providing structured and objective assurance of regulatory and contractual compliance through the Metrea IMS. Plan and lead internal audits, surveillance, and compliance monitoring activities, ensuring findings are risk‑assessed, prioritised, and closed effectively. Lead corrective and preventive action (CAPA) processes, including root cause analysis and verification of corrective action effectiveness. Ensure configuration control, documentation integrity, and disciplined adherence to approved processes across all AIC activities. Manage safety reporting, occurrence investigation, and safety risk assessments, verifying the effectiveness of safety risk controls and corrective actions. Provide independent, timely advice to the Head of AIC on quality performance, compliance status, safety trends, and emerging risks. Ensure quality, safety, and compliance outputs feed into management reviews, Quality Review Boards, and Safety Review Boards. Act as the primary interface between the AIC and Metrea enterprise Safety, Operational Compliance, and Training (SOCT) functions. Build, mentor, and lead quality and safety personnel as the AIC scales, setting clear expectations for professionalism, ownership, and accountability. What You’ll Bring Must haves: Bachelor’s degree in Aviation, Engineering, Quality, Safety, or a related discipline. 8+ years of progressively responsible experience in aviation quality, safety, and/or compliance within complex operational environments. Significant experience in a Part 145 maintenance and/or Part 21 modification or production environment. Strong working knowledge of FAA regulatory frameworks relevant to maintenance and modification, including Part 145 and applicable elements of Part 21. Proven experience implementing, operating, and improving formal management systems (QMS, SMS, IMS or equivalent). Demonstrated ability to lead audits, manage CAPA, conduct root cause analysis, and verify effectiveness. Experience providing independent assurance and constructive challenge to senior operational leadership. Strong written, verbal, and executive‑level communication skills, with the ability to brief complex issues clearly. Nice to haves: Experience with ISO 9001, AS/EN 9100, or similar aerospace quality frameworks. Background in aircraft modification, integration, or missionized aviation programmes. Familiarity with enterprise‑level integrated management systems and cross‑functional governance models. Prior experience acting as an accountable, nominated, or representative holder for quality, safety, or compliance functions. Additional Eligibility Qualifications Experience in aircraft modification, MRO, or missionized aviation environments. Prior background as a certificated mechanic, engineer, pilot, or aviation safety professional is highly desirable. Familiarity with Metrea Aviation Management System concepts or comparable integrated governance frameworks. Eligible to work legally in the United States and able to obtain and maintain any required background checks or customer‑mandated security clearances. Willingness to work primarily onsite in a hangar and flight‑line environment at Tampa International Airport, with occasional travel as required. Our Firmware At Metrea, our single core value, Rooted in Humility, and our four cornerstone attributes—Entrepreneurial, Systematic, Discerning, and Over-Deliver. These form what we call our Teammate Firmware. Just like technical firmware connects software and hardware, our Firmware is the constant interface between our mission and our people. It defines how we show up, how we work together, and how we solve complex problems. Our team Firmware creates a web-like, hyper-collaborative, dynamically hierarchical way of working that helps us adapt quickly, communicate openly, and distribute decision-making to where expertise actually lives. It enables groups to self-organize around hard problems, shift fluidly as priorities evolve, and operate with the trust, curiosity, and discipline required in a complex mission space. This foundation allows us to deliver elegant, effective solutions and uphold our purpose: protecting our precious inheritance. Benefits Comprehensive medical plan options HSA/FSA accounts Dental and vision coverage 6% employer 401(k) match Fully paid parental leave for all new parents Generous PTO Life and disability insurance Long-term and Short-term disability coverage AD&D Coverage Pet Insurance Employee Assistance Program Subsided gym membership / plans through Wellhub Work Authorization / Security Clearance Applicants must be legally authorized to work in the United States. (if US citizenship is required for the role due to government requirements please add: Must be a U.S. citizen.) AAP / EEO Statement The Company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a full-time exempt position with typical working hours of Monday through Friday, 8:00 a.m. to 5:00 p.m. Hours and work shifts may change in accordance with department and business needs. Exempt Employees must have the ability to be on-call and available, as business needs require. Work Location Tampa, FL Work Environment This job operates in an office setting Travel 5%

Job Description Ardurra is seeking an experienced Water/Wastewater CAD Designer to join our team in our Tampa, FL location! Ardurra is seeking a Water/Wastewater CAD Designer to join our well established and respected Water Practice supporting the design of water and wastewater engineering projects. The successful candidate will be responsible for producing high-quality, detailed civil engineering drawings and plans in collaboration with engineers and project managers. Primary Function: Under general direction, performs routine to moderately difficult design assignments which require the application of fundamental design techniques in accordance with company and industry standards and codes. Detailed instructions are provided by immediate supervisor for assignments requiring more- complex design concepts. This is the journey-level design position. Primary Duties: • Prepare civil site layout, piping plans, profiles, and details for water distribution, wastewater collection, and treatment systems., • Convert engineering sketches and specifications into detailed CAD drawings using AutoCAD, Revit, and Civil 3D., • Coordinate with engineers and other team members to incorporate design changes and ensure drawing accuracy., • Maintain organized drawing files and project documentation., • Review drawings for quality control and compliance with applicable codes and standards., • Assist with the development and maintenance of CAD standards., • May perform certain administrative tasks, such as determining manpower requirements, establishing drawing schedules, assigning tasks to lower-level design/drafting personnel, etc., • May provide conceptual input to projects during the planning stages. Education and Experience Requirements: • Associate's degree or high school graduate with vocational-tech or trade school training in basic drafting technology (or equivalent working knowledge/experience)., • Ideal candidates will have approximately 10+ years of experience as a designer, • This includes a working knowledge of fundamental CAD/Revit/drafting software. Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HJ1

Job Description PegasusTSI is a private, Florida-based company where people matter, where your voice is heard, and where decisions are made with PegasusTSI's business wellbeing and our team members' best interest in mind. During the company's more than 25-year history, our team has supported clients in the oil refining, petrochemical, fertilizer (phosphate and nitrogen), chemical, pharmaceutical, municipal, consumer products, and industrial facilities industries in the USA and internationally. PegasusTSI offers a comprehensive benefits package that includes medical, dental, vision, short and long term disability, long term care, life insurance, 401(k), paid time off, paid holidays, and company events that supports our team members throughout their career. We have an excellent opportunity for a Senior Instrument & Controls Engineer. The Senior Instrument & Controls Engineer is accountable for the adequacy of calculations, engineering drawings, and specifications for a project and compliance with schedule and budget. Responsibilities: • Maintain solid knowledge of digital and analog control systems for regulatory and supervisory process control design, development of control philosophy, and coordination of work between other disciplines and instrumentation departments, • Prepare workhour (engineering) estimates, installed cost estimates, budgeting, scheduling, controlling and reporting instrument and control design progress to ensure efficient and timely execution of the project, • Coordinate with Client on instrument specifications and control philosophy issues related to the development of P&ID diagrams, control systems design, and wiring of distributed control systems and programmable controllers, • Supervise engineering and design team members assigned to projects, manpower-planning, and scheduling of engineering activities, • Provide technical guidance and quality check on design team's output, as a working engineering and design discipline leader, • Liaise with plant and construction team members for on-going domestic and international projects, • Bachelor's of Science degree in Engineering related to Instrumentation and Control Systems (ABET accredited), • 10 or more years of experience in front-end and detailed engineering design of heavy industrial plants, • Professional Engineering (PE) required with established NCEES record for obtaining licensure in additional states, • Field work experience, • Extensive background in the design of instrumentation and control systems for chemical, refining, petrochemical and specialty chemical plants, including preparing instrument specs, loop sheets, wiring diagrams, etc., • Solid background in Programmable Logic Controller (PLC) and Distributed Control Systems (DCS) systems such as Allen Bradley, Emerson-Delta V, Yokogawa, Honeywell, etc., including Control systems design, preparing architectural network diagrams, and control equipment specifications, • Experience with detailed Design, Piping and Instrumentation Diagrams (PID) development, instrumentation and control equipment specifications, datasheets, • Knowledge of ISA, NFPA, API, ASME, OSHA and other relevant industry codes and standards with respect to design requirements, • Proficient with technical software applications, including MS Office and Google Workspace, • Excellent interpersonal and communication skills both verbal and written, • Ability to work both autonomously and collaboratively within a team environment, • Willingness to travel to job sites, as needed, • Must be legally authorized to work in the U.S. without company sponsorship

Job Description Path Construction is seeking qualified college graduates to join our organization in the Tampa, FL area. We are a rapidly growing commercial general contractor with offices in Arlington Heights, IL; Charlotte, NC; Knoxville, TN; Tampa, FL; Scottsdale, AZ and Dallas, TX with projects throughout the United States. Typical duties of an Project Engineer includes managing day-to-day activities of subcontractors and suppliers, contract administration, procurement, estimating, pay requests, change orders, requests for information, cost control, scheduling, tracking submittals, maintaining and delivering a high level of quality. The right candidate will have construction management internship experience on large and/or small projects and varying asset classes including, but not limited to, Higher Education, Retail, Multi-family, Hospitality, Healthcare, Restaurant, Transportation, Water and Waste Treatment, Self-Storage, Senior Living, Convention Centers, Laboratories, Correctional, etc. Path is looking for people with great technical skills, good communication skills, and strong attention to detail. About the Company Founded in 2008, Path Construction is a general contractor providing a vast array of construction services to multiple regions throughout the country. Our expertise is very diverse and includes experience on small and large projects of many different types, including but not limited to: healthcare, hospitality, higher education, multi-family, self-storage, senior living, transportation, water and waste treatment, convention centers, laboratories, and correctional. The main philosophy and strategy for the growth of our organization is to be on the cutting edge of all aspects of the construction process. Additionally, our unmatched customer satisfaction and, most importantly, the development and quality of our people drive our success. For more about us, please visit our website at . Duties for a Project Engineer include: • General Contract and Subcontract administration, • Monitor and document jobsite safety and accident prevention, • Construction Scheduling, • Material & Equipment – procurement and expediting, • Process RFI’s, • Receive, • Review, • Submit, • Log, • Shop drawing and submittal review and coordination, • Project cost review, reporting, updating and accounting, • Review of subcontractor applications for payment, • Participation in and documentation of project coordination meetings, • Supervision and coordination of subcontractors’ field installations, • Review and negotiate change proposal pricing from subcontractors, • Prepare change proposals, • Change order documentation and associated cost reporting and maintenance, • Research and suggest options on construction means, methods and equipment, • Quality control, • Project Closeout, • Implement all applicable Safety Programs and EEO/Affirmative Action Programs on the Project Requirements • A 4 year degree in Building Contruction, Engineering, or a related field, • Building and construction management internship experience, • OSHA Site Safety Experience, • Up-to-date with modern technology and display excellent communication skills, • General knowledge of construction principles/practices required, • Strong work ethic and desire to work in a team environment and grow the company, • Must have a valid driver’s license and ability to travel may be required, • Working knowledge of project management process and software. (Microsoft Office and SAGE 300 CRE), • Proficient in Microsoft Office, • Ability to lift and carry items weighing up to 30 pounds Preferred • Public work experience is a plus, • Estimating experience is a plus, • Self Perform experience is a plus, • OSHA 30 Hour Training, • Competitive Compensation, • Certification Training, • 401(k), • Health, Dental, Vision, Life, Long-Term and Short-Term Disability Insurance, • Company cellphone and computer, • Financial and Mental Health Support through a third party, • Travel and Entertainment Discount Program

Job Description At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for 110 years and we are known for our quality work and quality employees. This is your chance to join our team - help us to design the infrastructure that improve the world! We have an immediate opening for a Senior Bridge Engineer in our Tampa, FL office. This position will play an important role in expanding our market presence in Florida and supporting our Bridge Group companywide. Core responsibilities will include performing the design of new bridges and bridge widening/rehabilitation projects; performing evaluation, inspection, and load rating services for existing bridges; providing technical oversight and/or Quality Assurance/Quality Control reviews; and mentoring younger staff. Successful candidates will have experience designing major concrete and/or steel bridge projects and shall have a demonstrated ability to develop bridge engineering plans primarily for public sector clients including FDOT and other state departments of transportation, municipal clients, and other public entities. Our transportation contracts include a wide variety of structure types ranging from miscellaneous structures (culverts, signal and sign supports, noise walls, etc.) to major concrete and steel bridges. Requirements: • Bachelor of Science in Civil Engineering from an ABET accredited program, • 16+ years of bridge design experience, • P.E., registered in the state of Florida or ability to obtain within 6 months, • Experience designing bridge projects and preparing contract documents in accordance with FDOT policies and procedures, • Experience designing major concrete and/or steel bridge structures such as continuous post-tensioned concrete beams, curved steel I-girders or box girders, segmental concrete superstructures, post-tensioned concrete substructures, or bridges subject to vessel collision loads, • Strong knowledge of AASHTO bridge design specifications, • Strong experience with FDOT specifications, policies and procedures, • Experience with a variety of bridge design software, • Track record of establishing strong external and internal relationships, • Experience managing and mentoring staff of all levels, • Ability to travel to project sites, company offices and client meetings, • Excellent reputation as an engineering professional, • Positive attitude and willingness to work cooperatively with others, • Master’s degree or other advanced degree desirable, • Experience with other state and local DOT agencies in the Southeast and Mid-Atlantic WRA recognizes that employees play an important role in its success. Our commitment to full-time employees is reflected in the comprehensive benefits package we offer: • Flexible work schedule options, • Competitive salary, • Leave accrual and paid holidays, • Healthcare benefits, • Group Life Insurance, as well as additional optional life Insurance, short and long term disability insurance, • Flexible spending accounts for medical and dependent care reimbursement, • 401(k) Retirement Plan, • Tuition Reimbursement, • Employee Assistance Program Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) Position # 2825 #LI - Mid Level #LI - Onsite

Job Description Position Summary Description Performs transmission and generation design and settings, including managing diverse work assignments requiring highly developed professional judgment and knowledge of transmission and generation protection systems. As required, provides assistance to departments within Seminole associated with protection and control systems. Qualifications and Education Requirements This position is open to candidates based on their level and type of career experiences. The minimum requirement for an Engineer I position is a Bachelor’s of Science degree in Electrical Engineering from an ABET Accredited Institution. Advanced degree in engineering is preferred. Candidates should be registered or eligible to become a Registered Professional Engineer in the State of Florida. Experience in electric power utility in the discipline of system protection, emphasis on the design and settings. Experience requirements for an Engineer II position is three (3) years, Engineer III position is six (6) years, eight (8) years for a Senior Engineer position and fifteen (15) years for a Principal. Consideration for the higher-level classifications will require more experiences directly related to the duties of the position as well as meeting more of the preferred qualifications. Professional registration as an engineer in Florida or an advanced degree in engineering may substitute for one (1) year of experience. Core Competencies: Adaptable, Collaborative, Conscientious, Critical-Thinking, Outcome-Driven and Professional Technical Competencies/Skills: • Engineering Design, • Specifications / Request for Proposals, • Procurement, • Project Planning, • Quality Control, • Transmission and generation relay setting principles and standards, • System Protection Fault Analysis, • System Protection Communication, • NERC Compliance with PRC Standards, • IEC 61850, • APEN and/or PSSCAPE for Fault Analysis, • National Electric Code, Safety Codes, OSHA Rules, and appropriate Florida, RUS, NERC, FRCC and Federal transmission standards and regulations, • AcSELerator 5010 SEL, GE URPC software, • Self-starter/self-motivated, • Effective verbal/nonverbal, listening and written communications, • Leadership, • Focus on Quality, • Risk Management, • Project and time management, • Organization, • Multi-tasking, • Analytical Essential Functions • Prepares and designs complex transmission system protection standards, designs and settings for Seminole high-voltage transmission system to ensure BES integrity, • Performs project management on system protection projects, • Works on green-field and brown-field (retrofit) Protection and Control Projects, • Prepares, reviews and verifies system protection design and settings, transmission protection schematics and relay elementary diagrams, and relay test plans for transmission and generation assets, • Serves as subject matter expert for assigned NERC standards, • Recommends to his/her direct supervisor, any upgrades or advancement in technology required to keep Seminole’s protection and control systems and/or schemes up to industry standards and best practices, • Reviews and approves staff and consultant designs and calculations for Seminole protection schemes to assure proper system operation, • Develops specifications (if required) for all assigned projects and manages the request for proposal (or sole source) process with Seminole’s Supply Management, • Participates/evaluates bid proposals, recommends apparent successful bidder and assembles presentation data for his or her supervisor for any award that requires Executive Staff and/or Board action, • Reviews inventory for relay protection components for facility ratings purposes, • Analyzes all system disturbances for Seminole and all member delivery points to ascertain cause/effect and remedial action if necessary, • Develops system protection portion of substation operating instructions and assists System Operations with the development of restoration procedures for unscheduled outages, • Represents Seminole on applicable SERC and FRCC technical committees relating to protection and control, • Keeps abreast of new technologies and advancements, as well as participates at some level with outside organizations such as IEEE or NERC standard drafting teams, • Performs other duties as applicable to the position or as assigned., • NERC Compliance: Performs NERC Compliance Program roles if/as designated in Seminole's Standard Ownership Matrix (SOM) including ongoing evidence retention in "audit-ready" form. You should also be familiar with Seminole's Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole's compliance program and your duties and responsibilities in the SOM. Physical Requirements Must be able to follow established protective measures including wearing required personal protective equipment (PPE). Must possess a valid driver’s license and acceptable Motor Vehicle Report. Working Conditions Some travel, overnight stays, and work outside of normal business hours to existing and future transmission facilities, substation and generator sites as required. While working in certain areas of substations and/or switchyards, there is the potential for exposure to hazards typical of an industrial working environment. “Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.”

Job Description Responsible for providing a sound, independent and objective assessment and recommendation on risk factors associated with small business, midsize, large, complex structures and transactions related to Commercial Real Estate (CRE) transactions. This position will also oversee credit risk management and maintenance of credit quality for the respective assigned portfolio by monitoring relationship trends, clearing of exceptions, properly assessing and evaluating credit risk and other key factors, and providing recommendations and credit solutions which are appropriate to the relationship risk profile. Responsibilities: • Provide transactional support with the creation of credit memos while maintaining clear understanding of the Bank’s credit programs and policy and its adherence. Reports to supervisor all deviation from credit programs and policy., • Conduct analysis/underwriting functions, as needed. Provide support on new business activities by screening preliminary data and follow up in obtaining required documentation and conformity to credit underwriting policy of the bank. Prepare documentation, memos, and/or presentation as needed., • Perform the annual review of existing credit relationships; Identify necessary risk rating changes, errors or inconsistencies and recommend modifications to risk rating as deemed appropriate. This includes calculating and verifying covenant testing requirements and monitoring loan policy exceptions, as needed., • Support the accurate review and evaluation of the financial condition and operating performance of CRE Borrowers for new and existing loan exposures, increases, and modifications of terms/conditions., • Support the large & complex financial analysis with a high degree of accuracy in terms of figures and credit risk assessment. Responsibility will also include the proper identification of loan policy exceptions and identification of industry/loan structure specific risks/issues with appropriate mitigating factors., • Ability to identify, evaluate, monitor and make any recommendation deemed necessary to the supervisor to assess, reduce, eliminate or control any current or prospective risks to earnings or capital arising from violations of, or nonconformance with, laws, rules, regulations, prescribed practices, internal policies and procedures or ethical standards., • Assist in the review and measurement of Bank Borrower’s conformance with legal covenants, tracking of same and the identification of compliance or non-compliance This may include assisting Credit Portfolio Managers and Relationship Managers in collaborating with other bank units such as Credit Administration, Loan Operations, Credit Services, Closing areas, and Credit Risk., • Assist in the training process of new underwriters. Specifically, assist the trainees in the following: adopting the operating procedures of the department, mastering the various formats used and the credit criteria applied to the various forms of analysis., • Complete or review and provide feedback on spread financial statements, comprehensive analysis, and credit approval packages according to Bank credit programs and policy., • Work within the software systems for loan originations, modifications, annual reviews, and other presentations to senior management., • Responsible for the administration and monitoring maturities, delinquencies, including criticized assets reports on a regular basis as well as assisting in the identifying any “red flags” or problems within the portfolio. Reports to supervisor all portfolio issues and irregularities found in these reports., • Conduct project site visits/inspections and report findings., • Provide assistance in other areas within the department, as required, covering during vacation or absenteeism., • Ensure preventive measures are carried out to fully comply with current rules, regulations and internal policies relating to risks pertaining to BSA, USA Patriot Act, OFAC and other AML related issues., • Assist management with ongoing projects. Bachelor’s degree in business, accounting or finance required. Master’s degree preferred OR 5+ years of credit underwriting/credit analysis experience in lieu of education. Formal credit training preferred. Minimum Work Experience Requirements: 7+ years of professional experience credit underwriting/credit analysis. Knowledgeable of banking products and documentation. Technical and/or Other Essential Knowledge: Thorough understanding of the Bank’s credit procedures, programs and policy. Accounting and credit principles. Proficiency in Microsoft Suite is required; experience in SQL is a plus. Salesforce, nCino, FIS IBS experience is a plus. Sound time management and organizational skills required. Well organized and systematic. Must possess strong communication skills. This position is hybrid/remote work eligible.

Job Description Finding the right fit: At Ayres, we’re passionate about delivering innovative, community-focused transportation solutions with integrity and excellence. We’re seeking a Transportation Engineering Manager to lead our growing team in Tampa, Florida—a vibrant region full of opportunity and momentum. This is your chance to shape the future of transportation infrastructure in one of Florida’s most dynamic markets. As a key leader, you’ll guide a team of project managers, engineers, and technical staff while driving strategic growth and building strong client relationships. Your deep understanding of the Tampa Bay area and connections with agencies like FDOT District 7, local municipalities, and private sector clients will be essential to your success. Join Ayres – a USA TODAY Top Workplace recognized in both 2025 and 2026 – where people-first leadership, collaboration, and professional growth create an environment where great teams do their best work. On any given day, you’ll: • Develop and execute strategic, business, and marketing plans for the Tampa transportation group, with a focus on growth, profitability, and staff development., • Lead performance metrics including revenue, backlog, billing, and client satisfaction., • Supervise and mentor a high-performing team of engineers, project managers, and technical staff., • Represent Ayres in the Tampa community and within professional organizations., • Drive business development efforts, leveraging your local network to win new work and expand client relationships., • Collaborate with other divisions to foster a unified, efficient, and innovative work environment., • Lead marketing and proposal efforts for FDOT District 7, cities, counties, and private sector clients in the Tampa Bay region., • Oversee technical project execution, ensuring quality, compliance, and client satisfaction., • Prepare and negotiate contracts, scopes, schedules, and fees with clients and subconsultants., • Bachelor’s degree in civil engineering or a related field., • Proven experience in staff supervision, project management, and client development., • Strong presence in the Tampa transportation market with a track record of successful business development., • Collaborative leadership style that fosters a supportive, inclusive team culture., • Excellent interpersonal and communication skills., • Experience in a consulting or engineering firm., • Registered professional engineer (PE) in Florida., • Bachelor’s degree in civil engineering., • 15 years of experience in transportation engineering., • Health, dental, and vision Insurance., • Short and long-term disability and life insurance., • Employee stock ownership plan (ESOP) and 401K with company match., • PTO upon hire, paid holidays including two floating holidays, and a flexible work schedule. Our good-faith compensation approach is fair and equitable, and takes into consideration only permissible factors including, but not limited to, market data, education, training, skills, and experience, and geographic location where the work is performed. A salary range for this posting is $175000 - $210000. The foregoing salary range represents what the company believes, in good-faith, it will pay for the posted opportunity. The individual selected for this role will be evaluated with the compensation factors in mind and placed appropriately. Related Job Titles: Civil Engineer – Transportation Engineering Manager or Civil Engineer – Transportation Discipline Manager or Civil Engineer – Transportation Practice Manager, Transportation Group Manager – Tampa Region, Senior Transportation Engineering Manager, Transportation Practice Leader – Florida, Regional Transportation Engineering Lead, Transportation Infrastructure Manager, Transportation Market Leader – FDOT Focus, Director of Transportation Engineering, Transportation Project Delivery Manager, Transportation Services Manager – Tampa Bay, Transportation Engineering Operations Manager

Job DescriptionJob Description It's more fun with us! No one likes being bored at work, which is why a Domino's job is all about having fun! That's how we roll. We live to beat the rush and make it possible to make, bake or take pizzas during the hungry hours of the day and night, part or full time. You'll have plenty of time left over for school, hanging with your friends, or whatever. Sound good? Even if you just need a second job for some extra cash, Domino's Pizza is the perfect place for you. It all starts with you Domino's Pizza loves Domino's people. Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. In other words, we want you to be yourself, and as a Domino's Customer Service Rep that's exactly what you can be. Our Team Members know their stuff and know how to have a good time. Each store has its own personality, and we reward outstanding pizza making or up selling. Drive your own career Being a Domino's Customer Service Rep isn't your average pizza gig. And the way Domino's works, it could be just the beginning. Many of our team members began their careers as CSRs and today are successful Domino's franchise owners. From customer service to management, general manager to franchisee, our stores offer a world of opportunity. You'll find our Customer Service Representative jobs offer you more. From the first slice of pizza to the last customer you serve, we know how important it is to provide the best training and support. Our people are the reason we're successful today, and why we'll continue to be successful in the future. So it makes sense for us to help you become your very best. We don't drop you in the deep end. Your Domino's Manager or teammate will show you the ropes in-store, so you can hit the ground running without any worries. Domino's CSR Responsibilities Include: : · Demonstrating a friendly, positive attitude and great customer service skills · Taking orders over the phone and in person · Dealing with customer concerns · Cash handling · Upselling · Making Domino’s high quality pizzas · Food and portion control · Hygiene and food safety · Food preparation · General cleaning duties Those are the basics, but here’s what else you can expect: General Job Duties · Operate all equipment · Stock ingredients from delivery area to storage, work area, walk-in cooler · Prepare product · Receive and process telephone orders · Take inventory and complete associated paperwork · Clean equipment and facility approximately daily Communication Skills · Ability to comprehend and give correct written instructions · Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person Essential Functions/Skills · Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator) · Must be able to make correct monetary change · Verbal, writing, and telephone skills to take and process orders · Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed · Ability to enter orders using a computer keyboard or touch screenPushing · To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24- 30 and requires a force of up to 7.5 pounds to push · Trays may also be pulled Climbing · Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance Stooping/Bending · Forward bending at the waist is necessary at the pizza assembly station · Toe room is present, but workers are unable to flex their knees while standing at this station · Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day · Forward bending is also present at the front counter and when stocking ingredients Crouching/Squatting · Performed occasionally to stock shelves and to clean low areas Reaching · Reaching is performed continuously; up, down and forward Hand Tasks · Eye-hand coordination is essential; use of hands is continuous during the day · Frequently activities require use of one or both hands · Shaping pizza dough requires frequent and forceful use of forearms and wrists Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description • We are hiring immediately for full time and part time DISPATCHER positions., • Location: AdventHealth Tampa - 3100 East Fletcher Avenue, Tampa, FL 33613. Note: online applications accepted only., • Schedule: Full time and part time schedule. Hours and days may vary. Further details upon interview., • Requirement: No experience necessary. Willing to train!, • Fixed Pay Rate: $18.00 per hour. Make a difference in the lives of people, your community, and yourself. At Crothall Healthcare, a Compass Healthcare company, you’ll join a culture built on caring for people and creating a true sense of belonging. Our careers are filled with purpose and empower you to transform healthcare experiences while building lasting relationships. Crothall provides specialized, high-quality, innovative support services exclusively to the healthcare industry. As the market leader in Environmental Services (EVS), we support nearly 1,300 accounts, many of which are ranked among the nation’s top hospitals. With nearly 30,000 team members, we hold ourselves to high standards of detail, safety, and excellence. We empower and uplift each other by working together, take responsibility for doing the right thing, and believe there is no limit to our potential when we grow together across Environmental Services, Patient Transportation, Patient Observation, Facilities Management, Healthcare Technology Solutions, Ambulatory Services, and Sterile Processing. Job Summary Summary: Coordinates and monitors Patient Transportation services activities through timely, accurate dispatch and management of customer transportation requests. Essential Duties and Responsibilities: • Provides quality customer service to customers by providing one-on-one attention to detail., • Understands and applies knowledge of basic patient transport concepts, infection control practices and proper body mechanics., • Determines, explains and develops dispatcher logic and transporter activities. Transports patients when necessary., • Directs the activity of the transport function and transporters, ensuring timely completion of tasks. Monitors procedures related to availability and completion task, and follows up on issues related to service and operations., • Ensures requests have been addressed in an efficient, timely manner according to current departmental standards, priorities and patient appointments., • Serves as a liaison between Patient Transportation and other departments., • Assigns, collects and distributes pagers. Monitors daily sign-in/out procedures., • Develops and promotes positive customer service relationships with patients, patient family members, visitors and staff. Ensures accurate, timely dispatch of transport requests. Ensures maximum staff productivity., • Resolves problems related to patient, visitor, staff or employee complaints. Recommends solutions for ongoing or recurring issues., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Crothall is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Crothall maintains a drug-free workplace.

Job DescriptionSenior Veritas eDiscovery Platform (eDP) EngineerEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas eDiscovery Platform (eDP) Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas eDiscovery Platform (eDP) Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:Personnel assigned to this task must have the ability to adjust to changing priorities and work well under pressure. In addition, personnel may provide support along with OGC, to other FBI Divisions, such as CTD. At the Government’s discretion, available funding, and need this position will support Criminal Discovery Program. The Senior Veritas eDiscovery Platform is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed;- Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor Shall facilitate the migration of the system implementation into cloud infrastructures. - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSenior Veritas Enterprise Vault Engineer Employment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas Enterprise Vault Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas Enterprise Vault Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Enterprise Vault is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed; - Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall facilitate the migration of system into cloud infrastructure; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; - Contractor shall provide before/ or after core hour work as required. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Ardurra is seeking a Senior Highway Engineer to join our team in any one of our Miami, Orlando, Tampa, Tallahassee, or West Palm Beach, Florida offices! Our Transportation team offers design capabilities ranging from complex multilevel interchanges to urban arterial reconstruction to complete streets for our clients. Our portfolio features a plethora of signature projects including the I-395 Signature Bridge reconstruction project in Downtown Miami as showcased in the Engineering News-Record! Each of our designs is customized, sustainable, and cost-effective for our clients covering all project types, including Design Build or Design Bid Build. Our clients have relied on our expertise in comprehensive planning, engineering design, and construction management to provide safe and efficient transportation solutions. Primary Function The successful candidate will work on a variety of transportation related design projects developing contract plans, specifications, and estimates for construction. They should have experience with the entire project design delivery process and hands on design/engineering supervision. The candidate will be responsible for supervising and leading engineering design tasks pertaining to roadway geometric design, production of plans and writing of technical reports and documents. An Engineer VI provides expert judgement and analysis for the design, development and implementation of technical products and systems. They resolve highly complex technical matters and recommend alterations to development and design to improve quality of products and/or procedures. They are considered a specialist on complex technical and business matters, work highly independent, and may assume a team lead role for the work group. Primary Duties • Performs process design of multi-discipline transportation engineering projects, including evaluating alternatives, conducting engineering studies and design calculations, and performing preliminary and detailed design, • Provide technical expertise to ensure compliance with design intent, project scope, and state and federal design criteria and standards, • Develops contract plans and prepares technical specifications and cost estimates, • Assists with project execution and delivery including development of project scope, budget, and schedule, • Responsible for the day-to-day activities and coordination of engineers, designers, and technicians as assigned to a specific project, • Perform quality control on engineering work products including design calculations, models, drawings, reports, specifications, and estimates, • Assist with marketing and business development efforts, • A Bachelor of Science degree in Civil Engineering from an ABET accredited university or college, • 10+ years of post-licensure engineering experience in transportation design, • Proficient in Microstation and OpenRoads Designer with the ability to train and supervise the technical work of engineers, designers, and technicians, • Proficient in MS Office Suite programs (Word, Excel, PowerPoint, Project), • Experience preparing final design plans, specifications, and estimates, • Strong verbal communication and technical writing skills, • Strong analytical problem-solving, time management and organizational skills Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-BC1

Job DescriptionJob Description It's more fun with us! No one likes being bored at work, which is why a Domino's job is all about having fun! That's how we roll. We live to beat the rush and make it possible to make, bake or take pizzas during the hungry hours of the day and night, part or full time. You'll have plenty of time left over for school, hanging with your friends, or whatever. Sound good? Even if you just need a second job for some extra cash, Domino's Pizza is the perfect place for you. It all starts with you Domino's Pizza loves Domino's people. Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. In other words, we want you to be yourself, and as a Domino's Customer Service Rep that's exactly what you can be. Our Team Members know their stuff and know how to have a good time. Each store has its own personality, and we reward outstanding pizza making or up selling. Drive your own career Being a Domino's Customer Service Rep isn't your average pizza gig. And the way Domino's works, it could be just the beginning. Many of our team members began their careers as CSRs and today are successful Domino's franchise owners. From customer service to management, general manager to franchisee, our stores offer a world of opportunity. You'll find our Customer Service Representative jobs offer you more. From the first slice of pizza to the last customer you serve, we know how important it is to provide the best training and support. Our people are the reason we're successful today, and why we'll continue to be successful in the future. So it makes sense for us to help you become your very best. We don't drop you in the deep end. Your Domino's Manager or teammate will show you the ropes in-store, so you can hit the ground running without any worries. Domino's CSR Responsibilities Include: : · Demonstrating a friendly, positive attitude and great customer service skills · Taking orders over the phone and in person · Dealing with customer concerns · Cash handling · Upselling · Making Domino’s high quality pizzas · Food and portion control · Hygiene and food safety · Food preparation · General cleaning duties Those are the basics, but here’s what else you can expect: General Job Duties · Operate all equipment · Stock ingredients from delivery area to storage, work area, walk-in cooler · Prepare product · Receive and process telephone orders · Take inventory and complete associated paperwork · Clean equipment and facility approximately daily Communication Skills · Ability to comprehend and give correct written instructions · Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person Essential Functions/Skills · Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator) · Must be able to make correct monetary change · Verbal, writing, and telephone skills to take and process orders · Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed · Ability to enter orders using a computer keyboard or touch screenPushing · To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24- 30 and requires a force of up to 7.5 pounds to push · Trays may also be pulled Climbing · Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance Stooping/Bending · Forward bending at the waist is necessary at the pizza assembly station · Toe room is present, but workers are unable to flex their knees while standing at this station · Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day · Forward bending is also present at the front counter and when stocking ingredients Crouching/Squatting · Performed occasionally to stock shelves and to clean low areas Reaching · Reaching is performed continuously; up, down and forward Hand Tasks · Eye-hand coordination is essential; use of hands is continuous during the day · Frequently activities require use of one or both hands · Shaping pizza dough requires frequent and forceful use of forearms and wrists

Job Description Work Arrangement This is an onsite position. Job Overview AEVEX Aerospace seeks an experienced detail-oriented Subcontract Administrator to support multiple business units in a dynamic and fast paced manufacturing environment. This role is a full time, on-site position. The Subcontract Administrator works with the AEVEX team of procurement professionals, in support of DoD programs, to assure compliance with applicable procedures, regulations and legal requirements including FAR/DFARs and International Traffic and Arms Regulations (ITAR). We are seeking a motivated self-starter who can work independently and as part of a team in a dynamic environment. Candidate must have knowledge of various contract types, knowledge and application of TINA and CAS, along with good verbal and written communication skills. Under limited supervision, the Subcontracts Administrator is responsible for activities that span the entire procurement cycle, including but not limited to: negotiation of non-disclosure agreements (NDAs) and teaming agreements, preparation of solicitation packages to subcontractors, evaluation of subcontractor proposals, price analysis, negotiation of terms and conditions, subcontract administration, issue resolution, and closeout activities. Essential Functions • Responsible for review and negotiate contracts with vendors and suppliers, • Responsible for Proposal support of multiple business units, • Responsible for source selection and finding suppliers and vendors that meet the goals of the company, • Accountable for establishing and maintaining procurement parameters in MRP system, • Responsible for supporting make v buy recommendations consistent with business make v buy strategy, • Responsible for developing sound, cost-effective strategies for the purchasing of goods and services used across business units, • Responsible for Maintaining relationships with suppliers while continually scouting for additional vendors, • Accountable for evaluating spending operations while seeking ways to improve and enhance the quality of products purchased and the timeliness of deliveries, • Responsible for communicating with management regularly regarding the efficient flow of goods and services affecting production, • Assure compliance with applicable procedures, regulations and legal requirements including FAR/DFARS and International Traffic in Arms Regulations (ITAR)., • Negotiates NDA's and Teaming Agreements Terms and Conditions and Proposed Pricing, • Creates RFP solicitations in accordance with Government and AEVEX requirements, and ensure responses meet all TINA requirements., • Evaluates supplier proposal responses and performs detailed proposal analyses, source selections., • Analyze risks and identify risk mitigation., • Acts as primary interface between subcontractors and the programs being supported for all subcontracts related issues, regularly interacts with program management, contracts, project control, finance, business development., • Administers subcontracts of various types (FFP/Cost-type, etc.) and complexity, assuring compliance with AEVEX procurement procedures and contractual obligations for price, delivery, quality, and performance., • Accountable for conducting cost analyses and setting benchmarks for improvement, • Responsible for working closely with the company legal department to make sure contracts and terms are favorable, • Ensure supply chain processes meet legal requirements and standards, • Interfaces with Supply Chain Staff, Production, Engineering, Quality, Logistics, Senior Level Management, Accounts Payable and Contracts - Is a key and integral member of Integrated Product Teams (IPT's), • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Strong understanding of contract law, negotiation techniques, and risk management principles., • Excellent written and verbal communication skills., • Proficiency with contract management software and Microsoft Office Suite., • Working knowledge of FAR/DFARS, • Working knowledge of Government Property Administration, • Working knowledge of Non Disclosure Agreement (NDA) applicability, • Bachelor's degree in business administration, contract management, supply chain management, or related field., • Master's Degree Preferred, • A certificate in one or more of the following areas is desired:, • Certified Purchasing Manager (C.P.M.), • Certified Supply Chain Professional (CSCP) designation, • Certified in Logistics, Transportation and Distribution (CLTD) program, • 5 or more years of experience as a Subcontract Administrator in manufacturing environment., • 3-5 years applicable experience in the DoD/Federal industry and/or in positions with equivalent experience., • Experience with CPSR audits., • Experience in Hybrid Commercial / FAR compliant environment a plus. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to sit, and to reach to use computers and other office equipment For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job DescriptionOverview Company Overview: Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Job Description Allied Universal® is hiring an Account Manager. As an Account Manager, you are the driving force behind daily security operations, ensuring the safety and well-being of the people and places you protect. You will lead from the front-guiding, developing, and motivating your team of security officers and supervisors to deliver exceptional service. This is your opportunity to lead with purpose, make a real impact, and create a safer environment for those who count on you. Why Join Allied Universal? • Career Growth: Opportunities to advance within a global leader in security services, • Impactful Work: Play a vital role in protecting people, property, and businesses, • Manage scheduling: Leverage AI-powered technology to effectively schedule security officers, meeting client contract hours while minimizing unbilled overtime, • Lead and Develop Security Teams: Hire, coach and manage security officers and supervisors while overseeing payroll, performance, and employee relations, • Enhance Client Relationships: Serve as the primary point of contact for clients, ensuring high-quality service that protects people and property, • Handle Security Incidents and Emergencies: Respond to escalated issues professionally, coordinating with clients and internal teams, • High school diploma or equivalent, • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment, • Valid driver's license if driving a company vehicle, or personal vehicle while conducting business, • Minimum of two (2) years of experience in business operations, security management, or supervising teams in a fast-paced environment, • Experience in leading, developing, and retaining a dynamic team while building positive client relationships, • Knowledge of emergency preparedness, physical security protocols, risk assessments, and law enforcement coordination, • Proven ability to evaluate situations, make sound independent decisions, and resolve conflicts in an efficient manner, • Proficiency in web-based applications and computer systems, including Microsoft Office, • Ability to communicate effectively with clients and employees while managing multiple projects and driving operational excellence, • College degree in Business Administration or a law enforcement-related field, • Law enforcement, military, and/or contract or proprietary security services, or facility management experience, • American Society of Industrial Security (ASIS), International Certified Protection Professional (CPP) certification, • Previous payroll, billing, or scheduling experience, • Aptitude with security systems: CCTV, access control, and badge administration, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401(k)plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2026-1551077

Job Description UDR is seeking a Service Manager for two properties - Slade at Channelside and 101 N. Meridian (624 units combined) located in Tampa, FL GENERAL SUMMARY OF DUTIES: Oversee the efforts of property in the areas of inspection, maintenance, and repair. This position’s time is involved in leading and managing the completion of routine, daily tasks and projects. This position is responsible for ensuring the physical aspects of each community meet the company’s established standards and any applicable laws. This is done for safety, appearance, and operational efficiency reasons and must fall within the budgeted financial goals. Facilitate the diagnosis of problems and providing training for repairs in areas such as HVAC, electrical, plumbing, pool, carpentry, dry walling, exterior structural, and appliance. Additionally, the Service Manager is responsible to schedule the quick turnaround of vacated apartments for occupancy. SUPERVISION RECEIVED: Reports directly to the District Service Manager. SUPERVISION EXERCISED: Supervises (2) or more: Service Apprentice, Service Technician, and/or Painter. ESSENTIAL FUNCTIONS: 1. Manage the completion of all resident service and maintenance requests as required. Manage service requests and completion of such including completing work orders as assigned and as necessary., 2. Meet the service budget and manage the financial resources necessary to accommodate current and future maintenance and repair projects working within approved budget guidelines., 3. Provide leadership with the service team as needed or directed by the District Service Manager including interviewing, orientation, training and provide feedback to the District Service Manager on their performance., 4. Lead, direct, and supervise the service team in their day-to-day functions if applicable., 5. Review and approve Kronos timecard records for direct reports., 6. Manage and schedule the service support necessary to maintain the overall appearance, preventative maintenance, safety and OSHA/legal requirements to ensure the safety of residents and mitigate liability for the company., 7. Manage execution of emergency repairs from within service team or from third-party service vendor., 8. Conduct periodic inspections to assess effectiveness of policies and procedures and develop corrective action plans as needed., 9. Develop standards for the cleanliness and overall appearance of the community’s grounds, amenities, building exteriors, market ready unit interiors, breezeways, curbs, signage, leasing office, central garbage areas, parking lots, and other buildings and common areas to ensure that they reflect and represent the high quality of the community., 10. Manage, maintain, and report any amenity deficiencies to the Resident Services Manager and/or Community Director, whoever is designated as the property lead person., 11. Manage vacant apartment turn schedules., 12. Punch walks on all make-ready units as well as manage quality assurance of all vendor turns., 13. Utility management for vacant apartments to ensure energy efficiency., 14. Perform final walk for move-ins ensuring quality represents the company’s standard., 15. Perform pre and post move out inspections, documenting and taking/attaching photos of unit condition., 16. Provide determination for interior vacant condition for items to be replaced, such as carpet., 17. Manage ROI installations to include administrative prep, vendor coordination, etc., 18. Conduct weekly lighting inspections throughout the community, noting and resolving any issues per operational policy., 19. Complete and or manage all community common area and resident service requests., 20. Manage and oversee pest control for all units holding third-party vendor accountable., 21. Provide inspections to all fitness equipment to ensure safe operation., 22. Refrigerant (freon) usage and recovery log in compliance with Risk Management guidelines., 23. Manage pool logs for vendor compliance., 24. Complete Cap Labor forms., 25. Purchase supplies and equipment to maintain appropriate levels of inventory working within the budget guideline and through Ops Technology., 26. Monitor batteries for smart locks and proactively replace as necessary., 27. Serve as point person for questions on programming of controlled access areas within the community., 28. Manage equipment warranties and required follow-up., 29. Provide superior customer service to internal and external customers., 30. Hire and train new staff and develop staff to maximize potential as needed based on supervisory status., 31. Monitor staff performance to include performance and address performance problems through corrective action and dismissal. Assist direct reporting staff to address and resolve concerns or complaints involving job duties and job descriptions, performance standards, relations with coworkers, relations with supervisors and managers as needed based on supervisory status., 32. Approve time records and requests for time off as needed based on supervisory status., 33. Ensure leadership style creates a productive, motivated, informed, inspired, engaged and goal-oriented team., 34. Comply with all Company policies and procedures related to employment., 35. Commit to Living the UDR Values each day in every action taken when executing the essential functions of the job., 36. Perform other duties as assigned or as necessary. PERFORMANCE REQUIREMENTS: Knowledge of organizational and community policies and procedures. Ability to apply policies and procedures to solve everyday issues. Knowledge of an ability to follow proper safety techniques in accordance with OSHA, HVAC, Company, and community policies, procedures and standards to mitigate liability. Must know and follow the Fair Housing laws. Ability to proactively recognize and implement superior customer service to internal and external customers. Must know and follow the Fair Housing laws. Ability to examine and repair various types of service equipment. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to exercise initiative, problem-solving and decision-making skills. Ability to work in a fast-paced environment and handle multiple projects simultaneously to meet deadlines. Ability and willingness to lead, take charge, and offer opinions and direction. Immediately repairs or delegates repair of all mechanical or electrical equipment malfunctions, associate/resident/visitor injuries or accidents, or other safety issues to the appropriate individual(s) and recommends/initiates appropriate corrective actions. Ability to motivate, develop, and direct people as they work, identifying the best people for the job. Ability to apply the principles and practices of work leadership and management. Ability to motivate the community team and manage their performance in accordance with company policies, values, and business practices. Ability to effectively present information and respond to questions or resolve resident, vendor and contractor issues. Ability to work in conjunction with community management and associates. Must have effective verbal and listening communication skills. The ability to communicate information so others will understand. Skilled in the use of the internet, spreadsheets, databases, and word processing software. Ability to create, compose, and edit written materials. Ability to use a computer, a smart phone, and enter service ticket information into the service ticket system. TYPICAL PHYSICAL DEMANDS: Some bending, stooping and stretching. Must be able to push, pull, lift, carry or maneuver weights up to one hundred (100) pounds independently and two hundred and fifty (250) pounds with assistance. Requires eye-hand coordination and manual dexterity sufficient to operate tools and equipment. Sensory capability to detect odors and hear sounds necessary to detect, diagnose, and repair machinery. Requires normal range of eyesight. Ability to physically access exterior and interior parts of the community and amenities and be able to climb ladders and access small crawlspaces. Regular and consistent attendance on the job is an essential function. TYPICAL WORKING CONDITIONS: Frequent exposure to outside elements where temperature, weather, odors, and/or landscape may be unpleasant and/or hazardous. Flexible schedules with occasional evening and regular weekend work. EDUCATION AND EXPERIENCE: 1. High School Diploma or its equivalent preferred., 2. Technical or vocational certificate and/or degree preferred., 3. Minimum of four years’ experience in building and mechanical maintenance including HVAC, plumbing, electrical, appliance repair, painting and drywall, and/or pool maintenance., 4. Must be EPA Type II certified: Type III or Universal may be required at some locations., 5. Experience supervising associates is preferred., 6. Certification in Chlorine, Fluorine, and Carbon (CFC) required for diagnosing, repairing, and maintaining equipment required for some properties and preferred for all properties., 7. Some locations require certification in pool operation (CPO)., 8. Must have and maintain a valid driver’s license unless otherwise noted. • The Company retains the discretion to add to or change duties of position at any time. UDR is proud to provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. UDR is committed to providing and maintaining a diverse workforce and an inclusive work environment with equitable access and opportunity for associates to participate, grow, and reach their full potential.

Job Description At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for more than 110 years and we are known for our quality work and quality employees. This is your chance to join our team - help us to design the water/wastewater projects that improve the world! Whitman, Requardt & Associates, LLP is seeking a highly skilled and motivated Senior Water/Wastewater Engineer to join our team in Tampa, Florida. This individual will play a critical role in leading and managing water/wastewater projects from inception through completion, ensuring high-quality deliverables that meet client expectations. The Senior Engineer will also be responsible for business development activities, fostering client relationships, and contributing to the growth of our practice in the region. Key Responsibilities: • Lead marketing efforts to cultivate new client relationships and expand the firm's presence in the water/wastewater market in Florida., • Manage, plan, and provide design oversight for water/wastewater projects, ensuring technical excellence and adherence to project requirements., • Prepare and monitor project budgets, maintain control of work-in-progress, and ensure accurate client billings., • Successfully manage project delivery to meet established timelines, budgets, and quality standards., • Participate in all phases of project construction, including pre-bid conferences, bid evaluations, contract preparation, and construction oversight., • Engage in pre-project meetings, client presentations, and interviews to secure new project opportunities., • Bachelor’s degree in civil engineering, mechanical engineering, or related field., • Professional Engineer (PE) registration in the state of Florida., • 16+ years of relevant experience in water/wastewater engineering., • Strong knowledge of Florida water/wastewater specifications, policies, and procedures., • Proven track record in managing and delivering complex water/wastewater projects on time and within budget., • Excellent communication skills with the ability to interact effectively with clients, stakeholders, and project teams., • Master’s degree in engineering or related field., • Experience with relevant software applications for water/wastewater design and analysis. WRA recognizes that employees play an important role in its success. Our commitment to full-time employees is reflected in the comprehensive benefits package we offer: • Flexible work schedule options, • Competitive salary, • Leave accrual and paid holidays, • Healthcare benefits, • Group Life Insurance, as well as additional optional life Insurance, short and long term disability insurance, • Flexible spending accounts for medical and dependent care reimbursement, • 401(k) Retirement Plan, • Tuition Reimbursement, • Employee Assistance Program Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) Position # 3131

Job DescriptionWho we are.Platinum Technologies is a Northern Virginia based integrated solutions firm that specializes in Cybersecurity, Cloud and Digital Services to the Public Sector. Our team solves hard problems and helps our Mission Partners achieve their goals. If you are self-motivated, possess demonstrated learning agility, and are passionate about delivering high-quality work products – we want to hear from you. We lead with technical expertise, but that is just the tip of the iceberg – the ‘Why’ matters. At Platinum, we don’t hire people to do a job. We provide professional and leadership development to complement our self-motivated domain experts. Our teammates are dot-connecting leaders that operate in a mutually accountable environment to deliver thought leadership, expert technical analysis, and quality execution for our clients You.Platinum Technologies currently has an opportunity for a specialized Data Protection Engineer (Trellix) to join the SIPR and Top-Secret Network Execution Teams for a major Zero Trust transformation. While other roles focus on cloud-native security, this position is dedicated to securing the "tactical edge" and on-premises endpoints within the Command's classified environments. As the Senior Trellix Engineer, you will be the technical authority for the design, deployment, and management of the Trellix (formerly McAfee) Data Loss Prevention (DLP) suite. You will be responsible for configuring and tuning the Trellix ePolicy Orchestrator (ePO) to enforce rigorous device control and data protection policies on workstations operating in disconnected and air-gapped environments. Your work will directly prevent the unauthorized exfiltration of classified intelligence via USB drives, printing, and clipboard transfer, ensuring that the Command’s most sensitive networks remain secure against insider threats and accidental data loss. We are offering a competitive sign-on bonus and relocation assistance for qualified candidates. Located at MacDill AFB in Tampa, Florida. Candidates must hold an active TS/SCI clearance. Responsibilities● Trellix DLP Architecture: Lead the design and configuration of Trellix DLP Endpoint policies within the ePolicy Orchestrator (ePO) on SIPR and Top-Secret networks to monitor and block unauthorized data transfer vectors (USB, Web, Print, Clipboard).● Policy & Rule Tuning: Create and refine complex data classification rules and regex patterns to identify specific USSOCOM sensitive data types, actively tuning policies to reduce false positives and transition from "Audit" to "Block" mode.● Air-Gapped Operations: Manage the unique lifecycle of the ePO environment on the Top-Secret network, including the manual "sneaker-net" transfer of policy updates, agent patches, and threat intelligence definitions.● Integration: Configure ICAP integration between Trellix and other security components (such as Kiteworks or Web Proxies) to extend DLP inspection to network traffic and file transfers.● Incident Triage: Serve as the Tier 3 escalation point for DLP incidents, analyzing blocked actions and working with the SOC/SIEM team to ensure alerts are properly ingested into Splunk. Qualifications● Minimum Clearance Required to Start: Active Top-Secret clearance with SCI eligibility. Education● Senior Level: Master of Science (MS) degree in Computer Science, Cybersecurity, Information Technology, or a related field. Required Experience & Skills ("Must-Haves")● Senior Level: 10+ years of related technical experience.●Trellix/McAfee Expertise: Extensive (5+ years) hands-on experience architecting and administering Trellix (McAfee) ePolicy Orchestrator (ePO) and Data Loss Prevention (DLP) Endpoint products.●Device Control: Deep understanding of Device Control policies for managing removable storage, peripheral devices, and printing in a secure environment.●Regex & Classification: Proficiency in creating custom data identifiers using Regular Expressions (Regex) and dictionaries to detect sensitive information.●Troubleshooting: Proven ability to troubleshoot complex agent-based issues on Windows endpoints, including conflict resolution with other security software. Preferred Experience & Skills ("Nice-to-Haves")● Experience working in Air-Gapped or isolated network environments (e.g., JWICS, SAPs).●Knowledge of Trellix Endpoint Security (ENS) and Threat Intelligence Exchange (TIE/DXL).●Familiarity with Kiteworks or Boldon James for data classification integration.●Experience with Splunk for log analysis and dashboarding. Certifications● Required: CompTIA Security+ CE (or higher) to meet DoD 8570 IAT Level II requirements.● Preferred: Trellix Certified Specialist - Data Loss Prevention (DLP) or equivalent McAfee certification. The Company is an Equal Opportunity/Affirmative Action employer. All qualified candidates will receive consideration for employment without regard to disability, protected veteran status, race, color, religious creed, national origin, citizenship, marital status, sex, sexual orientation/gender identity, age, or genetic information. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Innovative Chemical Products Group (ICP Group) is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets. ICP Group is comprised of market leading brands known for innovation, quality, and performance. Founded in 2015 and supported by a lean corporate team, ICP Group has scaled rapidly through organic and acquisition growth into one of the largest coatings, adhesives, and sealants companies in North America. ICP Group is headquartered in Andover, MA and has manufacturing and distribution sites throughout North America, Latin America, UK, Europe and the Asia Pacific region. ICP is seeking a Maintenance Manager for our Tampa, FL plant. Under the direction of the Plant Manager, you will coordinate all mechanical and electrical maintenance activities ensuring the plant operates at the highest level of uptime and efficiency. Perform all maintenance functions within company defined Environmental, Health and Safety guidelines and sustain a clean and organized maintenance department. This is a hands on position where the manager performs all required maintenance activities and develops supporting staff to higher levels of skillset. In this role you will be responsible for the following: • Ensure maintenance department adheres to all OSHA safety requirements as it relates to the duties of maintenance operations, • Complete all required OSHA or corporate training courses as defined by management before conducting tasks, • Wear proper PPE as required for the task at hand, • Under the direction of the Plant Manager, coordinate and guide all maintenance activities from start to finish, • Install or repair pumps, motors, conveyors, filler lines, plant equipment or other devices required to maintain production uptime, • Typical equipment includes, but not limited to: 1) process pumps and mixing equipment, 2) pneumatic components and control systems, 3) hydraulic components and control systems, 4) power transmission systems (gearboxes, chains, drives, etc), 4) relay logic, 5) field instrumentation, 6) PLC/DCS troubleshooting, • Troubleshoot equipment issues and provide supervisor or management a repair solution including parts list and timeline, • Perform electrical maintenance such as wring motors, VFD’s control panels or other lower voltage items, • Troubleshoot PLC logic or hardware issues associated with automated process equipment, • Maintain maintenance shop in a clean, organized, professional condition, following all safety requirements for hazardous materials, • Keep all tools, power equipment, and other tools of the trade in a clean and safe working condition, • Ensure all documentation for LOTO, Confined Space, Hot Work and other related safety documents are completed before performing any work, • Maintain effective and positive communication with production staff, • Keep supervisors and management aware of pending issues and status of installation or repair, • Coordinate preventative maintenance tasks on key plant equipment and ensure completion of those tasks, • Strive to meet safety targets or objectives set by the supervisor or management, • Continuous development of maintenance staff through coaching and training, • Operate Forklift, Man Lift, Scissor Lift, or other similar equipment, • Order parts, check paperwork on receipt of parts, • Attend safety meetings, conduct safety audits, • Safely perform all other duties as required by supervisor on an as needed basis Requirements: • Maintenance department supervisor or previous lead mechanic experience, • A minimum of 10 years performing mechanical duties in a manufacturing or similar environment, • Highly experienced background installing/repairing air pumps, PD Pumps, pneumatic valves, gearboxes, • Experience with preventative maintenance programs, • Experience with roll line manufacturing in the roofing, paper or gypsum industries, • Background working with asphalt related products or equipment, • Advanced education or training in engineering, mechanics or technical related fields, • Computer skills, • Welding certifications plus strong pipe fitting and electrical skills, • Able to read technical documents, • Must have 20/20 or corrected 20/20 vision, • Understanding of boiler and or hot oil systems, • Ability to install and wire 100 hp electric motors, limit switches, photoelectric sensors, VFD’s, • Exhibit a strong problem-solving aptitude when it comes to mechanical equipment, • Employee must be able to safely lift in excess of 70 pounds without difficulty, • Employee must have full range of motion and able to work in awkward positions, • Must be able to work at heights in excess of 40 feet without concern, • Must be able to interact with all levels of plant personnel in a positive and productive way, • Experience leading projects from inception to completion, • Position will require lifting, stacking and bending. Employee will use various hand and power tools many of which are large and heavy. ICP Group is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Competitive salary, • Dental insurance, • Health insurance Position Summary: The Construction Superintendent coordinates all site construction activities and supervises all field personnel as required to successfully complete allocated projects on schedule and within budget. This includes maintaining the highest quality, supervising all trade and field personnel, while administering good construction safety practices with all on-site activities. Maintains job site office and closes out projects. Reports to Project Manager. Core Responsibilities: Coordinates and supervises all construction activities. Directs all field personnel to achieve completion of the project on schedule, within budget, and with quality workmanship that conforms to plans and specifications. Maintains construction schedules, and identifies and solves problems. Orders equipment and materials, and schedules inspections as required throughout project durations. Accurately tracks and accounts for all material and equipment on site, as well as providing required reports. Fully understands project plans, specifications, and safety policies and requirements. Maintains positive relationships with customers, contractors, suppliers and other employees. Prepares, schedules and supervises completion of final punch list and other close out documents. Promotes job site safety, encourages safe work practices and rectifies job site hazards immediately. Administers daily and weekly reports, conducts required safety meetings. Ensures all company employees and contractors are adhering to the company safety policy. Maintains a safe, clean and organized job site. Core Competencies: Organization: Utilizes strong organizational skills. Maintains clean and efficient job sites. Communication: Displays strong written and oral communication skills, and employs effective listening skills. Has strong computer skills and ability to work effectively with Microsoft Office. Problem Solving: Analyzes problems and makes sound decisions in a timely manner, based on objectives, risk implications and costs. Interpersonal skills: Tactful and mature demeanor with well-developed interpersonal skills, including the ability to work well with diverse personalities. Education and Experience: Minimum 7-10 years successful experience as a commercial construction Superintendent. College degree preferred but not required. High rise, supermarket or retail experience is a huge benefit. Experienced in scheduling, ordering, field supervision, quality control and production in all divisions of commercial construction. Experienced in managing multiple projects. OSHA 10 Hour, CPR & First Aid will be required. Must be proficient in the use of computer and iPad technology and able to utilize construction software programs. Personal Profile: A self-starting, highly motivated and goal orientated individual. Acute attention to detail with emphasis placed on quality. Extremely organized and systematic approach to tasks to achieve accuracy and efficiency. Well-developed interpersonal skills, including the ability to manage diverse personalities. Professionally and technically competent. SAFETY & QUALITY orientated. Quick, sharp, confident, assertive, ethical and ambitious. Analytical with the ability to examine issues from multiple viewpoints. Friendly and outgoing in social environments. Team player, works easily with others. Valid drivers license. HL Contractors, Inc. offers a salary commensurate on experience and qualifications, vehicle allowance, lodging allowance, per diem, travel allowance, paid vacation and holidays, and medical insurance. Travel to projects will be required. If you are a driven individual that meets the above requirements, and are interested in joining a dynamic and growing company, please forward your resume.

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Growing Ocala, FL based, publicly traded construction company is looking for a LEAD relay technician (with 10+ years of experience) and a SENIOR relay technician (with 7+ years of experience.) The ideal candidate will be able to: Apply / exhibit a high attention to detail with regard to safety and human performance. Conduct thorough prejob briefings at the beginning of each workday, and as needed throughout the day as conditions warrant. Perform relay panel risk assessments daily and apply human performance barriers as needed. Develop functional guidelines with an emphasis on human performance principles. Relay Technicians must garner and maintain NERC certifications for access into NERC CIP control houses. Maintain and control proper use of Duke Energy issued TCA secure laptop. Review construction prints, make corrections as needed, confirm schemes will function properly. Work with Duke Energy RCE and RCI and the Relay Design Engineering to resolve any problems with the protection and control schemes. Apply approved LV control cable and fiber optic safe work practices. Review all protective relay settings as issued. Working with RCE, RCI and the Relay Settings Engineer to resolve all problems with the relay logic and protection settings. Review the SCADA point assignment sheet as issued by the Energy Control Center. Work with the Senior Engineering Technical Support Specialist to resolve any conflicts between the relay logic settings and the RTU (remote terminal unit) settings and any other supervisory control issues. Oversee the inventory of all relay material issued to the project. Order all missing items through the RCI and Material Coordinator. Direct and oversee all aspects of the mounting and wiring of relays, termination racks, cabling from panel to panel, and termination of all cables by wiremen or electricians. Relay technicians will inspect wiring of all high voltage yard equipment as wired by others. Quality control is provided at the time of this construction by the lead or senior relay technician on the job. Provide on-site support to other departments (Substation, Production. Telecomm, etc...), such as proper direction and placement of high voltage circuit breakers and power transformers. Review and correct as needed, the Substation Operating Instructions as issued by Relay Engineering personnel. Coordinate with others to schedule and sequence each phase of all electrical projects. Knowledgeable in providing and keeping relay protection to all HV equipment throughout the duration of the project. This may require temporary relay settings, wiring, etc... Test CT's of high voltage equipment for ratio, polarity, saturation and meggar insulation tests. Apply relay settings, test and calibrate all relays using calibrated relay test equipment and Enoserv RTS software program. All as-left relay testing documentation will be saved and submitted to RCE. Create and install proper labeling on all panels. Order labels for exterior junction boxes and switch handles. Verify proper wiring of all potential and current circuits from the instrument transformer to the end element device. Relay technicians should have fiber optic splicing and termination abilities with CFOT certification. Relay Technician must be capable of testing all HV apparatus such as power transformer sudden pressure schemes, Power line Carrier line tuner, wave traps and transceivers. Verify transformer and breaker alarms function properly from the equipment terminal blocks, into the control house. Check for local indication, as well as, to the Energy Control Center Functionally test all relay and control circuits to verify proper operation during simulated fault conditions. Confirm proper operation of all new equipment via SCADA by working with System Protection and Control Technicians at the Energy Control Center. Coordinate and schedule with Dispatchers and Substation Construction personnel to energize new equipment. When equipment is energized for the first time, perform, or confirm electrical phasing of new lines or equipment. Take In-Service readings of all new equipment as primary load is first applied. Leave a complete corrected set of relay drawings at the Substation. Turn in a corrected set of red lined drawings to RCE for Relay Design redrafting. Sign and turn in all documents (settings, in-service sheets, CTR sheets, substation operating instructions, point assignment sheets) to the RCI or RCE or appropriate person. Schedule meetings with maintenance personnel to inform them of new equipment, schemes, and answer any questions they may have. Schedule a meeting with the project engineers, if needed, to go over lessons learned. Oversee the documenting of all excess items and schedule a pick-up of this excess material to be returned to the storeroom for credit. Pay Rates: $55-62/hr for senior with 7+ years of experience , $65-77/hr for lead with 10+ years of experience

Job Description Job Summary Mat Supply is seeking a highly skilled and detail-oriented EVA Foam CNC Fabricator & Installer to join our growing manufacturing team specializing in premium EVA foam products for golf carts and marine applications. This is not a traditional factory CNC position. We are looking for someone with fabrication experience who understands custom work, precision templating, CNC cutting, installation, and high-end finished products. In this role, you will help manufacture and install custom EVA foam flooring systems similar to SeaDek-style marine flooring products for golf carts and custom vehicles. Your expertise will contribute to delivering durable, reliable, and high-quality products while helping us continue to grow one of the fastest-expanding product lines in the golf cart industry. Key Responsibilities • Operate CNC cutting machines to produce EVA foam mats for golf carts and marine applications, • Create templates and patterns for custom flooring systems, • Use a Prodim Proliner digital templating device for precision measurements and template creation, • Install EVA foam flooring products on golf carts and other vehicles, • Load, align, and secure EVA foam sheets for cutting, • Execute and monitor CNC cutting files for accuracy and consistency, • Perform material layout optimization to reduce waste, • Inspect finished parts for quality, fitment, and precision, • Maintain a clean and organized work area, • Perform routine machine maintenance and basic troubleshooting, • Coordinate with the design team on file adjustments and production improvements, • Assist with product development and fitment testing, • Track production quantities and report production or machine issues Qualifications • Experience operating CNC routers, cutters, or similar machinery preferred, • Familiarity with EVA foam, Marine Mat, SeaDek-style products, or soft material cutting is a major plus, • Experience with installations and finish work preferred, • Ability to read and work from digital design files (DXF, AI, etc.), • Strong attention to detail and quality control, • Mechanically inclined with the ability to troubleshoot basic equipment issues, • Reliable, punctual, and team-oriented, • Strong craftsmanship mindset and pride in finished work Preferred Experience • Experience using a Prodim Proliner or other digital templating systems, • Experience with nesting and material layout optimization, • Knowledge of CAD/CAM software (VCarve, Aspire, etc.), • Background in upholstery, marine, golf cart, automotive, or custom fabrication industries Compensation & Benefits • Competitive compensation, • Full-time position, • Paid time off, • Overtime opportunities available, • Long-term growth opportunities within a rapidly expanding company Why Join Mat Supply • Fast-growing company in the golf cart and custom vehicle industry, • Opportunity to work with high-demand EVA foam flooring products, • Hands-on fabrication and installation role with consistent production work, • Work with premium custom products and cutting-edge equipment, • Opportunity to grow with a company actively scaling manufacturing operations Pay: $26.00 - $30.00 per hour Work Location: In person

Job DescriptionWork in a luxury grooming environment where we recognize you as a skilled professional. You'll have control over your schedule, spa days to recover physically from long days, the freedom to decline aggressive dogs, and a respectful workplace that values your expertise over speed. We Offer • $65,000 - $80,000 per year, including commission and tips (avg. 4-6 dogs a day), • Employee referral bonus opportunities, • 4-day work weeks, • Paid time off, health, dental, and vision insurance, • Paid ongoing grooming, mentorship opportunities, and a potential annual training seminar, • Provided Mercedes-Benz Van fully equipped with air conditioning, a hydrobath, and a grooming salon, • Focus on providing luxury one-on-one care to pups daily while working independently in our grooming vans., • Enjoy the ongoing support of our in-house concierge and fleet teams that handle scheduling and van maintenance so you can groom., • Fall in love with grooming with a manageable daily schedule while focusing on safety and quality with every appointment.Requirements, • No degree is required; we are looking for groomers with experience.Aussie Pet Mobile - Overview, • Our custom-designed mobile pet grooming vans come equipped with air conditioning, heating, electricity, and waterwithout the need for external hookups. We prioritize eco-friendliness and provide a spacious, comfortable environment for pets to move freely, allowing groomers to focus on each pets individual needs., • At Aussie Pet Mobile, we offer a 100% cage-free, one-on-one grooming experienceall in the convenience of our clients' driveways.Aussie Pet Mobile - Hiring Process, • A phone call within 24 hours, • An in-person interview within 48 hours, • An offer letterand lunch with the ownerwithin 7 days

Job Description Primary Duties: Duties include design, permitting, and coordinating the water resource parts of projects. Engineering design tasks include grading, storm sewer and drainage area sizing. Primary Function: Act as staff specialist in the area of water resource engineering. Plan, design and provide construction administration design for drainage aspects of project. Primary Duties: • Review project and site. Provide concept design for overall drainage system., • Research, collect and review available data on existing and surrounding permits., • Perform hydrologic and hydraulic calculations for stormwater management system analysis., • Prepare applications for submittal to permitting agencies including water management districts, FDOT, Counties and Cities., • Prepare drainage reports, design documents, and design plans and specifications., • Supervise and direct staff assigned to Project Team., • Assist with quality control., • Coordinate with sub-consultants and related companies, including geotechnical, architecture, landscape architecture, lighting, etc., • Bachelor’s Degree in Civil Engineering., • 5-10 years directly applicable experience in water resources/storm water, • Florida Professional Engineering (P.E.) License or ability to become professionally registered within one year., • Experience with AutoCAD, Ponds and ICPR design software., • Ability to work on projects in a team environment. While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HJ1

Job Description Assistant Project Manager – Commercial Stone (Training Provided) Ramos Marble & Granite – Tampa, FL Full-time | On-site | $1,000 to 1,200/week (depending on experience) We are seeking a motivated Assistant Project Manager to work directly with our Senior PM (Nick Ramos) on pursuing and managing commercial stone projects across Tampa Bay. This role is ideal for someone with basic construction knowledge who wants real career growth in a specialized, high-demand trade. What You’ll Do • Assist with take-offs, estimating, and reviewing construction plans, • Prepare bids, proposals, submittals, and project documentation, • Coordinate with GCs, superintendents, vendors, and field teams, • Help manage jobsite schedules, logistics, and quality control, • Support purchasing, material tracking, and project administration, • Learn the stone industry from the ground up — we train you What We’re Looking For • Experience with plan reading, takeoffs, or construction coordination, • Working knowledge of Excel, spreadsheets, and basic estimating, • Strong communication and organizational skills, • Ability to thrive under deadlines and handle multiple projects, • Proactive, detail-oriented, eager to learn and grow, • Commercial construction, design, drafting, or GC/sub experience preferred Why Join Us • Work side-by-side with experienced leadership, • Career path: Assistant PM → PM → Senior PM, • Weekly pay + benefits + bonus opportunities, • Stable, established company with a strong reputation, • Friendly, supportive environment where your growth matters If you’re ready to build a long-term career in commercial project management — not just a job — we want to meet you. Apply Now Company DescriptionStone Fabricator, Countertop and Tile installationStone Fabricator, Countertop and Tile installation

Job Description Rocket Pest Control is an out of this world company looking for the best people to help us be the trusted choice in pest control! Our Mission is to protect customer’s homes, families and businesses by delivering safe, convenient and reliable pest control solutions. We are committed to customer service and growth while maintaining a culture that makes our employees proud to work at Rocket. Job Type Full-Time: Non-Exempt Work Week | Work Hours Monday – Friday | Call Center Operations Hours: 7:30am – 6:00pm Specialties / Licenses or Certifications Certified Customer Service Professional (CCSP) Customer Service Certifications (CSC) Our Position Are you passionate about delivering exceptional customer experiences? Rocket Pest Control is looking for a Customer Service Professional to join our growing team! This role is perfect for someone who thrives in a fast-paced environment, enjoys helping customers, and wants to build a career with advancement opportunities in Sales, Retention, Collections, and more. Your Rewards • 8 Company-paid Holidays (Full-Time Only), • 10 Days of Paid-Time Off (Full-Time Only), • Company-Paid group life insurance, • Medical, Dental, and Vision plans (Full-Time Only), • Retirement Plans with Company match including 401k up to 5%, • Employee Assistance Programs Essential Functions, Duties, and Responsibilities Duties may include, but are not limited to, the following and must be carried out in a manner that consistently reflects and upholds the Rocket Core Values: • Handling and managing inbound/outbound customer service calls., • Engaging customers in conversation to assess needs, qualify each call, and provide information about Rocket’s products and services in accordance with established call flow guidelines., • Creating call-back service accounts and maintaining accurate records for current customers., • Processing customer payments and applying them to the correct accounts., • Scheduling inspections and/or quality-control visits for sales inspectors and technicians., • Navigating multiple software programs simultaneously - entering data in real time, placing orders, searching existing accounts - all while maintaining a friendly, professional conversation., • Documenting all customer interactions accurately in PestPac and forwarding them to appropriate departments., • Accurately entering sales leads information into PestPac and scheduling appointments., • Supporting digital communication channels by responding to customers via text or email., • Assisting the Inside Sales team by handling inbound calls during peak high-volume periods., • Resolving billing issues by researching concerns, offering appropriate resolutions, and applying credits or adjustments, when necessary., • Building and maintaining strong relationships with the Branch and Service Managers, service professionals, administrative staff, and sales team., • Fostering effective communication with branches to continually enhance overall customer experience., • Demonstrating excellent communication and interpersonal skills to build trust, support customer satisfaction, and create positive interactions., • Meeting or exceeding performance metrics and monthly development goals., • Perform additional duties and projects, as assigned., • Compensation: $18 an hour plus performance bonus eligibility Qualifications: Education, Experience, and Skills Required: • Education: High School diploma or equivalent., • Experience:, • Previous customer service or inside sales experience is preferred., • Customer service and interpersonal skills are required., • Technical Skills:, • Proficiency in Microsoft Word, Excel, and Outlook., • Analytical Skills: Strong problem-solving, data interpretation skills, and attention to detail., • Soft Skills: Strong verbal and written communication skills; ability to multi-task and navigate multiple systems simultaneously, ability to work independently and collaboratively; strong relationship building skills; professional; results-oriented and team focused., • Other Requirements:, • Reliable transportation., • Successful completion of a criminal background check., • Successful completion of pre-employment drug screening. Rocket Core Values: Reliability: Doing what we say we’ll do, with a commitment to quality, safety, timeliness, and continuous improvement. Ownership: Embracing accountability and being proactive to ensure that our work is always handled with pride. Customer Focus: Prioritizing customer satisfaction through effective communication and support. Knowledge: Maximizing first-class tools, training, and experience to be the very best. Excellence: Delivering the highest level of service through passion and commitment. Teamwork: Developing strong relationships fortified in transparency, collaboration, and inclusion. Working Environment Work is performed in a standard office setting with moderate noise levels. The role requires managing multiple projects and frequent interruptions to address the needs of employees, customers, and senior leadership. Work From Home: The role may be eligible for remote or hybrid work, contingent on performance, scheduling, and operations requirements. Employees working from home must maintain a professional work environment, adhere to all company policies, and ensure access to reliable high-speed internet and secure technology resources. Remote arrangements may be adjusted or revoked at management’s discretion. Working Conditions/Physical Requirements This is a primarily sedentary role requiring regular use of hands for typing, communication, and computer work. Occasional lifting of up to 10 pounds may be required. Visual acuity is needed for data analysis, computer work, and reading. Equipment or Machines Routinely Used in This Position Regular use of computers, monitors, keyboard, mouse, mobile devices, tablets, telephones, headsets, printers, scanners, presentation tools, and other electronic accessories. Review Procedures Employee performance will be evaluated regularly. Rocket Pest is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or reasonable accommodation due to a disability during the application or the recruiting process, please let our recruitment team know. Benefits/perks listed above may vary depending on the nature of your employment with Rocket Pest. The wage range for this role considers the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for any applicable geographic differential associated with the location at which the position may be filled. At Rocket Pest, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case.

Job DescriptionJob Description It's more fun with us! No one likes being bored at work, which is why a Domino's job is all about having fun! That's how we roll. We live to beat the rush and make it possible to make, bake or take pizzas during the hungry hours of the day and night, part or full time. You'll have plenty of time left over for school, hanging with your friends, or whatever. Sound good? Even if you just need a second job for some extra cash, Domino's Pizza is the perfect place for you. It all starts with you Domino's Pizza loves Domino's people. Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. In other words, we want you to be yourself, and as a Domino's Customer Service Rep that's exactly what you can be. Our Team Members know their stuff and know how to have a good time. Each store has its own personality, and we reward outstanding pizza making or up selling. Drive your own career Being a Domino's Customer Service Rep isn't your average pizza gig. And the way Domino's works, it could be just the beginning. Many of our team members began their careers as CSRs and today are successful Domino's franchise owners. From customer service to management, general manager to franchisee, our stores offer a world of opportunity. You'll find our Customer Service Representative jobs offer you more. From the first slice of pizza to the last customer you serve, we know how important it is to provide the best training and support. Our people are the reason we're successful today, and why we'll continue to be successful in the future. So it makes sense for us to help you become your very best. We don't drop you in the deep end. Your Domino's Manager or teammate will show you the ropes in-store, so you can hit the ground running without any worries. Domino's CSR Responsibilities Include: : · Demonstrating a friendly, positive attitude and great customer service skills · Taking orders over the phone and in person · Dealing with customer concerns · Cash handling · Upselling · Making Domino’s high quality pizzas · Food and portion control · Hygiene and food safety · Food preparation · General cleaning duties Those are the basics, but here’s what else you can expect: General Job Duties · Operate all equipment · Stock ingredients from delivery area to storage, work area, walk-in cooler · Prepare product · Receive and process telephone orders · Take inventory and complete associated paperwork · Clean equipment and facility approximately daily Communication Skills · Ability to comprehend and give correct written instructions · Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person Essential Functions/Skills · Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator) · Must be able to make correct monetary change · Verbal, writing, and telephone skills to take and process orders · Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed · Ability to enter orders using a computer keyboard or touch screenPushing · To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24- 30 and requires a force of up to 7.5 pounds to push · Trays may also be pulled Climbing · Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance Stooping/Bending · Forward bending at the waist is necessary at the pizza assembly station · Toe room is present, but workers are unable to flex their knees while standing at this station · Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day · Forward bending is also present at the front counter and when stocking ingredients Crouching/Squatting · Performed occasionally to stock shelves and to clean low areas Reaching · Reaching is performed continuously; up, down and forward Hand Tasks · Eye-hand coordination is essential; use of hands is continuous during the day · Frequently activities require use of one or both hands · Shaping pizza dough requires frequent and forceful use of forearms and wrists Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionFood Service Manager Job DescriptionRole Overview Totum Market and Cafe is seeking a Food Service Manager to oversee the prepared foods, cafe production and back of house kitchen systems for our flagship Tampa location. This role is designed for a chef operator who combines strong culinary instincts with operational discipline across inventory planning, labor management, forecasting and retail food production. The Food Service Manager will be responsible for building a scalable prepared foods program spanning grab and go, deli, fresh prepared foods, cafe offerings, smoothies, juices and seasonal menu rotations aligned with a natural grocery environment. This position works closely with store leadership and the grocery buying team to ensure efficient production, strong margins and high product quality. Key Responsibilities • Oversee all back of house production including prep workflows, packaging systems and daily output scheduling across prepared foods stations, • Align prepared foods production with store inventory to reduce shrink and improve margin performance, • Maintain portion control standards, waste reduction systems and recipe costing discipline, • Optimize back kitchen layout and workflow for efficient production in a compact footprint along with labor allocation.Café Food and Beverage Integration, • Oversee cafe food execution including smoothies, cold pressed juice program, baked goods, light cafe meals and prepared retail snacks, • Train cafe staff on product knowledge and upselling, • Coordinate production timing between kitchen and cafe teamsInventory Planning and Forecasting, • Manage ordering, • Adjust output dynamically based on demand trends, • Maintain strong inventory accuracy across perishables and production ingredients, • Monitor food cost targets and contribution margins + work with management teamFood Safety and Compliance, • Ensure compliance with Florida DBPR, FDACS and local health department standards, • Maintain sanitation walkthrough routines and equipment cleaning schedules, • Oversee labeling, storage, allergen handling, FIFO rotation and temperature controlsTeam Leadership and Kitchen Culture, • Recruit and develop the prepared foods and cafe production team, • Build a structured staffing model aligned with production demand, • Implement training systems for consistency across stations, • Foster a collaborative kitchen culture balancing creativity and operational disciplineMenu Development and Innovation, • Lead seasonal menu development across kitchen and cafe platforms, • Monitor Tampa Bay food trends and competitor positioning, • Collaborate with marketing on launches and product storytelling, • Four to seven plus years in a culinary leadership role within grocery prepared foods, cafe production or fast casual scratch environments, • Managing ordering, • Managing labor scheduling and food cost targets, • Producing grab and go retail food programs, • Experience creating a food and beverage menu, • Operating in a grocery environment strongly preferred, • Launching or scaling a prepared foods program highly desirableCertifications, • ServSafe Manager Certification required, • Florida DBPR Food Manager Certification required, • Wine or beverage certification such as WSET or Cicerone is a plusSkills, • Strong production planning and kitchen workflow design, • Retail food margin awareness, • Menu costing and portion control discipline, • Comfort forecasting demand and adjusting output, • Cross functional collaboration with store leadership and buyers, • Interest in seasonal sourcing and natural food systems Benefits Compensation • Base salary expected range $70,000 - $80,000, • Performance bonus tied to food cost control, labor productivity, prepared foods sales growth and shrink reduction. 5-10% + benefits. (After baseline KPIs and metrics have been established), • Retention bonus available following twelve months of successful program execution, • Health, Vision, Dental, Retirement, PTO and Etc

Job Description Overview Are you ready to take your career to new heights? At Concentra, you will be a vital member of our patient care team and play a crucial role in providing exceptional care to our patients. Our mission is to improve the health of America's workforce, one patient at a time. Join us at Concentra and see how your clinical competency and compassion can make a meaningful difference in the lives of the patients you serve. As a Physical Therapist, you will provide rehabilitative services for the treatment of disabled, injured and diseased patients in a center in accordance with Concentra Medical Centers’ Injury Process Management and Concentra Medical Centers’ philosophy of rehabilitation in occupational medicine and Concentra policies, practices and procedures and applicable regulations. Responsibilities • Ensure delivery of high quality patient care services, • Perform direct patient care, including evaluation of muscle, skeletal, neurological and other physical problems, • Support and encourage multidisciplinary coordination of treatment, • Ensure proper documentation of patient care, • Maintain professional standards through compliance with quality assurance policies/ procedures as well as applicable regulations and corporate policies, • Implement effective communication with own and other departments' staff, with medical staff and patients to ensure coordinated efforts and provision of high quality service and optimal patient care, • Demonstrate effective problem-solving and conflict-resolution abilities, • Inform Administrator of department problems, needs and solutions in a timely manner, • Plan, design, implement and interpret specific physical therapy treatment programs for patients to facilitate the patient's recovery and attainment of maximum physical potential, • Educate patients in the proper care and use of supports and performance of exercise programs, • Perform or delegate patient treatment to include modalities, therapeutic exercises, gait training and hydrotherapy, • Follow appropriate documentation and reporting procedures, • Secure prescription for each patient treated, • Work closely with the physician to ensure comprehensive delivery of services and quality patient care, • Assist marketing staff with tours as necessary, • Take all necessary precautions to protect center assets and property against loss or waste through negligence or dishonesty, • Participate in professional development by attending center meetings and outside educational seminars, • Communicates with the Outcome Assurance Injury Coordinator or the Case Manager for each patient, • Communication regarding the patients’ objective progress, compliance with the program, compliance with attendance of scheduled appointments, the therapist’s estimated time frame until discharged from therapy, • Participates in clinical instruction of university occupational therapy and/or occupational therapist assistant students, • Participates with the evaluation of the effectiveness of the rehabilitation quality management process and assist in new and improved processes Qualifications • Bachelor’s Degree from an accredited Physical Therapy program, • Masters’ Degree from an accredited Physical Therapy program, preferred, • Concentra Core Competencies of Service Mentality, Attention to Detail, Sense of Urgency, Initiative and Flexibility, • Ability to make decisions or solve problems by using logic to identify key facts, explore alternatives, and propose quality solutions, • Outstanding customer service skills as well as the ability to deal with people in a manner which shows tact and professionalism, • The ability to properly handle sensitive and confidential information (including HIPAA and PHI) in accordance with federal and state laws and company policies, • Demonstrated willingness to participate in initial and ongoing training as required., • Demonstrated effective communication and interaction with employers, patients, providers and other employees, • Demonstrated ability to maintain working relationship with all levels of employees, • Demonstrated excellent customer service skills, • Demonstrated computer skills, • Knowledge of common safety hazards and precautions to establish a safe work medical environment, • Skill in developing and maintaining patient care records and writing reports, • Skill in time management, planning and workload control, • Skill in identifying problems and recommending solutions, • Skill in developing and maintaining medical quality assurance and quality control standards, • Skill in establishing and maintaining effective communication and working relationships with Management, patients, medical staff and the general public, • Must successfully complete orientation and training as well as demonstrate competency in all required physical therapy tasks

Job DescriptionJob Description It's more fun with us! No one likes being bored at work, which is why a Domino's job is all about having fun! That's how we roll. We live to beat the rush and make it possible to make, bake or take pizzas during the hungry hours of the day and night, part or full time. You'll have plenty of time left over for school, hanging with your friends, or whatever. Sound good? Even if you just need a second job for some extra cash, Domino's Pizza is the perfect place for you. It all starts with you Domino's Pizza loves Domino's people. Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. In other words, we want you to be yourself, and as a Domino's Customer Service Rep that's exactly what you can be. Our Team Members know their stuff and know how to have a good time. Each store has its own personality, and we reward outstanding pizza making or up selling. Drive your own career Being a Domino's Customer Service Rep isn't your average pizza gig. And the way Domino's works, it could be just the beginning. Many of our team members began their careers as CSRs and today are successful Domino's franchise owners. From customer service to management, general manager to franchisee, our stores offer a world of opportunity. You'll find our Customer Service Representative jobs offer you more. From the first slice of pizza to the last customer you serve, we know how important it is to provide the best training and support. Our people are the reason we're successful today, and why we'll continue to be successful in the future. So it makes sense for us to help you become your very best. We don't drop you in the deep end. Your Domino's Manager or teammate will show you the ropes in-store, so you can hit the ground running without any worries. Domino's CSR Responsibilities Include: : · Demonstrating a friendly, positive attitude and great customer service skills · Taking orders over the phone and in person · Dealing with customer concerns · Cash handling · Upselling · Making Domino’s high quality pizzas · Food and portion control · Hygiene and food safety · Food preparation · General cleaning duties Those are the basics, but here’s what else you can expect: General Job Duties · Operate all equipment · Stock ingredients from delivery area to storage, work area, walk-in cooler · Prepare product · Receive and process telephone orders · Take inventory and complete associated paperwork · Clean equipment and facility approximately daily Communication Skills · Ability to comprehend and give correct written instructions · Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person Essential Functions/Skills · Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator) · Must be able to make correct monetary change · Verbal, writing, and telephone skills to take and process orders · Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed · Ability to enter orders using a computer keyboard or touch screenPushing · To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24- 30 and requires a force of up to 7.5 pounds to push · Trays may also be pulled Climbing · Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance Stooping/Bending · Forward bending at the waist is necessary at the pizza assembly station · Toe room is present, but workers are unable to flex their knees while standing at this station · Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day · Forward bending is also present at the front counter and when stocking ingredients Crouching/Squatting · Performed occasionally to stock shelves and to clean low areas Reaching · Reaching is performed continuously; up, down and forward Hand Tasks · Eye-hand coordination is essential; use of hands is continuous during the day · Frequently activities require use of one or both hands · Shaping pizza dough requires frequent and forceful use of forearms and wristsAdditional Information All your information will be kept confidential according to EEO guidelines.

Job Description Federal Construction Professionals – QCM, Superintendent, SSHO, PM, Estimator, Scheduler Apply Below! Elite Recruiting and Consulting Services, SDVOSB, is building an ongoing pipeline of experienced Federal construction professionals for upcoming NAVFAC, USACE, and Guard projects nationwide. If you have worked on military bases or federal vertical or horizontal projects, we want to connect. We support primes preparing for new phases, new awards, and upcoming mobilizations. Roles We Are Sourcing Quality Control Manager Construction Superintendent SSHO, Site Safety Officer Project Manager Estimator Scheduler Federal skilled trades Types of Projects Access control facilities Barracks and housing Aircraft hangars HVAC and MEP upgrades Ranges and training facilities Renovations on Air Force, Army, Marine Corps, and Guard installations What Helps You Stand Out NAVFAC or USACE project experience CQM certification EM 385 1 1 OSHA 30 Secret or Top-Secret clearance Ability to travel Strong documentation and coordination skills How to Apply Complete our Federal Construction Candidate Form below for fastest review We will reach out as soon as your experience matches an upcoming federal project. Veterans are encouraged to apply.

Job DescriptionDescription The Operations Manager – Curbside Revenue Collections & Maintenance is a hands-on operational leader responsible for the day-to-day execution, oversight, and performance of curbside revenue collection services and preventative maintenance/cleaning programs across a municipal parking program. This role ensures the integrity, transparency, safety, and consistency of all assigned collection and maintenance activities while supporting a positive customer experience in the public right-of-way. The Operations Manager leads frontline collection and maintenance personnel, manages route planning and scheduling, enforces internal controls and audit-ready documentation, and ensures curbside assets such as pay stations, meter equipment, and related signage are properly maintained, clean, and functioning. The role serves as a key liaison between field teams, client stakeholders, and supporting vendors or technical partners to ensure service delivery meets or exceeds contract standards. Key ResponsibilitiesRevenue Collection Operations (Curbside Systems) · Oversee day-to-day curbside revenue collection operations including route planning, scheduled collections, vault/canister exchanges, equipment access control, and documentation protocols. · Ensure all collection activities are completed safely, on time, and in accordance with established policies, procedures, and internal control standards. · Enforce strict chain-of-custody practices, including dual-custody processes where applicable, and maintain integrity of all cashless/cash-related collection activity. · Review and validate collection logs, exception reports, and operational activity reporting to ensure accuracy, completeness, and audit readiness. · Coordinate with counting/reconciliation partners (internal or third-party) to ensure collection documentation supports accurate balancing and reporting. · Investigate collection anomalies, document findings, and implement corrective actions to mitigate revenue risk. Preventative Maintenance & Cleaning Program Oversight · Develop, implement, and manage preventative and daily cleaning programs for curbside parking assets including pay stations, poles/meters, decals, signage, and surrounding public-facing environments. · Ensure equipment and signage are maintained in a safe, clean, and customer-friendly condition that supports compliance and confidence in the parking system. · Conduct routine inspections and quality assurance checks to verify service standards are being met. · Identify maintenance issues (damage, wear, vandalism, visibility concerns, performance concerns) and coordinate timely resolution with appropriate parties. · Track and report asset condition and cleanliness levels, escalations, and corrective measures. Team Leadership & Workforce Management · Lead, coach, and hold accountable a team of revenue collection and maintenance/cleaning staff. · Support recruiting, onboarding, training, scheduling, and performance management of assigned employees. · Establish daily priorities and task assignments; verify completion and adherence to safety and quality requirements. · Foster a culture of accountability, professionalism, customer service, and continuous improvement. Safety, Compliance, and Risk Management · Ensure field staff compliance with all safety protocols including situational awareness, use of PPE, vehicle operation standards, and secure handling procedures. · Maintain operational readiness for incident response, including documentation and escalation for safety events, equipment damage, or service disruptions. · Ensure compliance with all applicable company policies, client requirements, and contract deliverables. · Participate in audits and operational reviews by preparing documentation and supporting corrective action planning. Reporting, Documentation, and Performance Management · Maintain accurate operational documentation including collection activity logs, maintenance records, inspection checklists, exception reporting, and service verification. · Produce routine performance updates for leadership and/or client stakeholders as required (daily/weekly/monthly operational summaries). · Track key performance indicators (KPIs) such as route completion, exception rates, service timeliness, cleanliness scores, equipment issues, and staffing productivity. · Recommend process improvements to increase efficiency, transparency, and reliability of collections and maintenance programs. Stakeholder & Vendor Coordination · Serve as a primary field liaison between Reimagined Parking operations teams and technology/maintenance vendors supporting curbside equipment. · Coordinate service requests, issue escalations, and follow-up resolution while maintaining clear communication and documentation. · Support positive, professional relationships with client representatives and partner organizations through proactive communication and responsive service. Skills, Knowledge and Expertise· 3+ years of operations leadership experience in at least one of the following: municipal services, field operations, logistics, cash handling/revenue controls, facilities maintenance, or service delivery management. · Demonstrated experience managing frontline teams with accountability for daily performance. · Strong working knowledge of internal controls, documentation standards, and audit-ready operational practices. · High attention to detail and ability to identify risk, variances, and process gaps. · Proficiency with mobile reporting tools, log tracking, and Microsoft Office (Outlook, Excel, Word). · Valid driver’s license with an acceptable motor vehicle record. BenefitsJoin our team and enjoy an outstanding benefits package, including: Generous Paid Time Off: Enjoy 20 days of paid time off, plus 8 paid holidays, so you can rest and recharge. Comprehensive Health Plans: Access top-notch Medical, Dental, and Vision coverage for you and your family. Life and Disability Insurance: Company paid basic life and Short-Term Disability to secure your future with essential protection for you and additional options for your loved ones. 401(k) Plan: Benefit from a generous employer match with immediate vesting to help you save for retirement. Employee Assistance Program: Access behavioral Health Care to assist with personal needs for you and your family members. Parental and Caregiver Leave: Enjoy time off to support your growing family or care for loved ones

Job Description Responsible for providing a sound, independent and objective assessment and recommendation on risk factors associated with small business, midsize, large, complex structures and transactions related to Commercial and Industrial (C&I) transactions. This position will also oversee credit risk management and maintenance of credit quality for the respective assigned portfolio by monitoring relationship trends, clearing of exceptions, properly assessing and evaluating credit risk and other key factors, and providing recommendations and credit solutions which are appropriate to the relationship risk profile. Responsibilities: • Provide transactional support with the creation of credit memos while maintaining clear understanding of the Bank’s credit programs and policy and its adherence. Reports to supervisor all deviation from credit programs and policy., • Conduct analysis/underwriting functions, as needed. Provide support on new business activities by screening preliminary data and follow up in obtaining required documentation and conformity to credit underwriting policy of the bank. Prepare documentation, memos, and/or presentation as needed., • Perform the annual review of existing credit relationships; Identify necessary risk rating changes, errors or inconsistencies and recommend modifications to risk rating as deemed appropriate. This includes calculating and verifying covenant testing requirements and monitoring loan policy exceptions, as needed., • Support the accurate review and evaluation of the financial condition and operating performance of C&I Borrowers for new and existing loan exposures, increases, and modifications of terms/conditions., • Support the large & complex financial analysis with a high degree of accuracy in terms of figures and credit risk assessment. Responsibility will also include the proper identification of loan policy exceptions and identification of industry/loan structure specific risks/issues with appropriate mitigating factors., • Ability to identify, evaluate, monitor and make any recommendation deemed necessary to the supervisor to assess, reduce, eliminate or control any current or prospective risks to earnings or capital arising from violations of, or nonconformance with, laws, rules, regulations, prescribed practices, internal policies and procedures or ethical standards., • Assist in the review and measurement of Bank Borrower’s conformance with legal covenants, tracking of same and the identification of compliance or non-compliance This may include assisting Credit Portfolio Managers and Relationship Managers in collaborating with other bank units such as Credit Administration, Loan Operations, Credit Services, Closing areas, and Credit Risk., • Assist in the training process of new underwriters. Specifically, assist the trainees in the following: adopting the operating procedures of the department, mastering the various formats used and the credit criteria applied to the various forms of analysis., • Complete or review and provide feedback on spread financial statements, comprehensive analysis, and credit approval packages according to Bank credit programs and policy., • Work within the software systems for loan originations, modifications, annual reviews, and other presentations to senior management., • Responsible for the administration and monitoring maturities, delinquencies, including criticized assets reports on a regular basis as well as assisting in the identifying any “red flags” or problems within the portfolio. Reports to supervisor all portfolio issues and irregularities found in these reports., • Conduct project site visits/inspections and report findings., • Provide assistance in other areas within the department, as required, covering during vacation or absenteeism., • Ensure preventive measures are carried out to fully comply with current rules, regulations and internal policies relating to risks pertaining to BSA, USA Patriot Act, OFAC and other AML related issues., • Assist management with ongoing projects. Bachelor’s degree in business, accounting or finance required. Master’s degree preferred OR 5+ years of credit underwriting/credit analysis experience in lieu of education. Formal credit training preferred. Minimum Work Experience Requirements: 10+ years of professional experience credit underwriting/credit analysis. Knowledgeable of banking products and documentation. Technical and/or Other Essential Knowledge: Thorough understanding of the Bank’s credit procedures, programs and policy. Accounting and credit principles. Proficiency in Microsoft Suite is required; experience in SQL is a plus. Salesforce, nCino, FIS IBS experience is a plus. Sound time management and organizational skills required. Well organized and systematic. Must possess strong communication skills. This position is hybrid/remote work eligible.

Job Description Engineering Manager (Assignment: Interoperability & API Engineering) WelbeHealth PACE helps seniors stay in their homes and communities by providing medical care and community-based services. We believe in going the extra mile and aim to make a genuine difference in our participants' lives. The Engineering Manager is a hands-on technical leader accountable for driving the delivery of production-grade APIs, integrations, and AI/ML–enabled services within the Interoperability & API Engineering team. This role mirrors the technical leadership engineering rigor serving as the technical anchor for a dedicated team while enabling broader organizational scaling. The Engineering Manager will architect solutions, mentor engineers, build proof of concepts (PoCs), enforce engineering excellence, and ensure secure, compliant, scalable, and high-performing systems aligned with healthcare and organizational standards. This role is different because the Engineering Manager at WelbeHealth: • Directly shapes secure, compliant, production-grade systems that power care for vulnerable seniors – this role is about being the hands-on technical anchor rather than just managing delivery, • Medical insurance coverage (Medical, Dental, Vision), • Work/life balance - We mean it! 17 days of personal time off (PTO), 12 holidays observed annually, and 6 sick days, • 401K savings + match, • Comprehensive compensation package including base pay and bonus Technical Leadership & Hands-On Engineering • Lead end-to-end architecture, development, and delivery of APIs, microservices, and integration pipelines for internal and external healthcare systems, as well as act as the senior-most engineer for the team: designing components, writing high-quality code, troubleshooting complex issues, and performing rigorous code reviews, • Implement repeatable MLOps patterns for model deployment, monitoring, and lifecycle management, • Bachelor's degree in relevant field; master's degree preferred, • Minimum of eight (8) years in software engineering, with at least three (3) years in a team leader or senior engineering capacity, • Minimum of two (2) years of hands-on experience with AI/ML, Azure AI Foundry, AI Foundry agents, or related AI integration frameworks, • Strong hands-on experience with Python and/or Node.js for API engineering and data integrations; known knowledge on Microsoft Azure tools stack is a must, • Prior experience in healthcare, interoperability, or API-heavy environments is a must, • Proficiency in REST/GraphQL API design, microservices patterns, authentication/authorization (OAuth2, JWT, Entra ID), and event-driven architectures, • Familiarity with MLOps tools (Azure ML, MLflow, Databricks) and container ecosystems Compensation consists of base salary plus bonus. WelbeHealth offers a competitive total rewards package that includes a 401(k) match, comprehensive healthcare coverage, and a broad range of additional benefits. Actual compensation will be determined based on experience and relevant qualifications. Compensation Offering$132,181—$174,478 USD COVID-19 Vaccination Policy At WelbeHealth, our mission is to unlock the full potential of our vulnerable seniors. In this spirit, please note that we have a vaccination policy for all our employees and proof of vaccination, or a vaccine declination form will be required prior to employment. WelbeHealth maintains required infection control and PPE standards and has requirements relevant to all team members regarding vaccinations. Our Commitment to Diversity, Equity and Inclusion At WelbeHealth, we embrace and cherish the diversity of our team members, and we're committed to building a culture of inclusion and belonging. We're proud to be an equal opportunity employer. People seeking employment at WelbeHealth are considered without regard to race, color, religion, sex, gender, gender identity, gender expression, sexual orientation, marital or veteran status, age, national origin, ancestry, citizenship, physical or mental disability, medical condition, genetic information or characteristics (or those of a family member), pregnancy or other status protected by applicable law. Beware of Scams Please ensure your application is being submitted through a WelbeHealth sponsored site only. Our emails will come from @welbehealth.com email addresses. You will never be asked to purchase your own employment equipment. You can report suspected scam activity to

Job Description H&H is offering an exciting opportunity for a Senior Traffic Engineer/Traffic Modeler with five+ years of professional experience to be part of our transportation team. This position will provide traffic engineering capabilities in support of our Southern District operations, with potential for additional responsibilities in our growing southern regions including North Carolina, Louisiana, and Texas. The successful candidate will provide traffic signal design, traffic analysis, signing and pavement marking design, and assist with design efforts for the Transportation group. A strong background in Florida DOT and County design policies and procedures is preferred. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you’ll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Provide Traffic Signal, Signing and Striping Design and EOR duties on Signalization and S&PM Plan Sets, • Perform intersection and roadway capacity analyses using HCS, Synchro, and SimTraffic software and prepares traffic impact studies, • Oversee the creation of engineering documents, design reports, and variation/exception reports, • Provide support to local and regional offices within the company, • Coordinate plans, calculations, and specifications amongst multi-discipline engineering teams, • Perform internal quality control procedures, • Bachelor’s in Civil Engineering from an accredited four-year college, • Florida Professional Engineering License or ability to obtain, • PTOE certification a plus, • Minimum five years of experience, • Knowledge of FDOT plan preparation criteria and design standards, • Knowledge of other transportation disciplines and their relationship to traffic design, • Strong verbal communication and technical writing skills We offer a professional work environment, a competitive salary, benefits package and 401(k). EOE M/F/ DISABILITY/VETS

Job Locations US-FL-Tampa Requisition ID 2026-12174 Category Superintendent Are you looking for a highly rewarding opportunity that provides extensive career growth opportunity? Gilbane is seeking a Superintendent for a large healthcare project. This position will be on the job site every day and will fill a key role on the project team. Who are we? As a Top-10 ENR Contractor, Gilbane is a family-owned business with 45 offices that has been shaping communities since 1870. Consistently recognized as one of the most reputable construction management firms in the country, Gilbane is committed to delivering projects safely and on-time. You will have the opportunity to build schools, labs, hospitals, corporate offices, sports arenas and more! We are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Who are you? You are someone who acts inclusively, showing empathy and treating others with respect and dignity in order to uphold Gilbane's core value of Caring and "People First" workplace culture. You seek to listen in order to understand and can convey information clearly. You're a strong problem solver who can identify, prioritize, and implement alternatives for solutions, and you demonstrate adaptability by collaborating with others and supporting team members to achieve excellence. A self-starter who shows passion, commitment, and ownership all while delivering on business outcomes and driving results. You're someone who identifies opportunities for new and improved ways of doing things that result in value-add solutions. Your core values match Gilbane's: Integrity, Caring, Teamwork, Toughmindedness, Dedication to Excellence, Discipline, Loyalty, and Entrepreneurship. What's in it for you? Gilbane offers employees multi-dimensional training opportunities through a number of resources. While managing your responsibilities to projects, you will be able to enroll in trainings through our award-winning Gilbane University to build leadership and technical skills. In addition, you would work with an experienced team which provides you with the opportunity to learn new industry skills every day. You will protect and promote the interests of both Gilbane and the client in all matters as well as demonstrating the personal characteristics of a developing leader. Directs the day-to-day coordination of Gilbane's trade partners and their sub-contractors to ensure high-quality work that meets the approved project schedule • Develops, documents, and communicates the work plan regarding changes made in the field, • Maintains a thorough understanding of contract documents in order to proactively anticipate potential problems, • Participates in constructability review and identifies change impacts, • Obtains or verifies that subcontractors obtain all necessary permits for construction purposes, • Acts as primary safety representative in the field, • Establishes credibility among owners, trade contractors, unions, and other project partners by maintaining a fair and trustworthy environment, • Leads contractor meetings on a regular basis, • Maintains daily reports and documentation using software tools, • Creates, manages, and updates the project schedule, creating and implementing contingency plans when necessary, • Communicates schedule status, updates and changes to project team and trade contractors, • Plans, coordinates, and manages jobsite logistics, • Oversees project quality plan, completes inspections, and implements necessary changes, • Communicates with Site Services/Next 150 to order materials and schedule crew, • Coaches and mentors less Field Engineers on project needs, construction knowledge, and business acumen, • Understands scopes of work; assists in writing scopes of work and participates in buyout, • Assists in Time and Materials (T&M) tracking, • Leads stretch and flex, daily huddle, and pre-task plan reviews, • Supports a positive and inclusive work environment, • Bachelor's degree in Engineering or Construction Management, • 5+ years of experince with interior construction in hospitals., • OSHA 30-hour certified, • STS-C Certification, • First Aid, CPR, AED, Stop the Bleed Training, • Strong technical and communication skills, • Excellent organizational skills, • Excellent problem-solving skills and ability to adapt to changing needs, • Ability to work in a team environment, • Ability to collaborate on a daily basis with the project team, • Proficient in Microsoft Office, • Knowledge of suite of construction software tools, including scheduling software, • Construction-document and drawing literate, with knowledge of all phases of construction, • Experience and proficiency in multiple divisions of work, methods, materials, scheduling, and cost control, • Strong knowledge and appreciation of construction safety processes and ability to enforce the project safety plan, • Ability to create an environment where "safety first" is the culture and all trades people work with an incident and injury free attitude, • Understanding of general requirements financial forecasting Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

Senior Geotechnical Engineer Requisition Number: 2026-1840-01 S&ME is looking for an experienced and driven Senior Geotechnical Engineer to lead and build our geotechnical team in Tampa, Florida. This is an opportunity to take ownership of impactful work, apply your expertise to complex engineering challenges, and continue developing your career within a collaborative and growth-focused environment. As a Senior Geotechnical Engineer, you will serve as a technical, project, and people leader, guiding geotechnical projects from early planning through final delivery while upholding high standards for safety, quality, and performance. You will apply advanced knowledge of subsurface investigations, analysis, and design to develop sound, practical solutions for challenging site conditions. In this role, you'll work closely with clients and project partners, contribute to business development initiatives, and help strengthen long-term client relationships. You'll also play a key role in mentoring junior engineers/geologists, coordinating multidisciplinary teams, and refining processes to improve efficiency and consistency, supporting both individual development and the continued growth of S&ME. Your Day-to-Day: • Geotechnical Analysis & Design: Perform and oversee advanced evaluations related to foundations, settlement, slope stability, and earth support systems, and recommend appropriate ground improvement or mitigation methods., • Project & Client Collaboration: Partner with clients, contractors, and internal teams to support successful project execution while providing guidance, feedback, and mentorship to junior staff., • Reporting & Proposal Development: Produce clear, well-organized technical reports, contribute to project proposals, and support marketing and relationship-building activities., • Leadership & Quality Focus: Promote best practices by maintaining compliance with company standards, emphasizing safety, risk management, schedule adherence, and quality control throughout all phases of work. What You Bring: • A Bachelor's degree in Civil or Geotechnical Engineering, Mining, or a related engineering field, • A Minimum of 10 years of project management experience in the A/E/C industry, • Professional Engineer (PE) license or the ability to obtain, • A strong proficiency in computer skills, including at a minimum Microsoft Excel, Word, PowerPoint, and AutoCAD We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. Here's what you can look forward to: • Medical, Dental & Vision Plans with HSA and FSA options, • Wellness Program - $50 off per month on your 2027 premiums!, • Pet Insurance, • 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution, • 401(k) Retirement Plan, • Paid Holidays and Paid Time Off (PTO) - with rollover options, • Paid Maternity & Parental Leave, • Mentorship & Career Development Programs, • Credential Incentive Program - get rewarded for advancing your skills, • Tuition Reimbursement, • Employee Recognition Program, • Company Vehicle & Fuel Card - for project-based roles, • $2,000 Employee Referral Bonuses - and more! If you are seeking a challenging and rewarding career with a firm committed to our employees and providing quality service to our clients, join our team! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted.

Job Locations US-RI-Providence | US-CT-Glastonbury | US-FL-Boca Raton | US-FL-Orlando | US-FL-Jacksonville | US-FL-Sarasota | US-FL-Tampa | US-GA-Atlanta | US-MD-Baltimore | US-MA-Boston | US-MI-Detroit | ... Requisition ID 2026-11926 Category Superintendent Gilbane is seeking Senior General Superintendents for various locations nationwide. We are looking for candidates across the country who are open to relocation and travel as necessary. This is an exceptional opportunity to join a dynamic and expanding organization that prioritizes employee development and offers substantial advancement projects. We are actively building our talent pool for future opportunities within our organization. If you are interested, please submit your application and if there is a fit we will contact you for an initial discussion. Who are we? As a Top-10 ENR Contractor, Gilbane is a family-owned business with 45 offices that has been shaping communities since 1870. Consistently recognized as one of the most reputable construction management firms in the country, Gilbane is committed to delivering projects safely and on-time. You will have the opportunity to build schools, labs, hospitals, corporate offices, sports arenas and more! We are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Who are you? You are a coach/leader who leads with an inclusive and empathetic mindset. You provide feedback and guidance to help others excel in their current or future roles. You determine priorities, delegate work, and effectively communicate progress. You establish measures to assess the impact, quality, and timeliness of results while praising successes and sharing lessons learned. You build high performing teams by attracting, engaging, developing, and retaining talented individuals through motivation and discipline to maximize impact on the organization and the individual. You leverage business insights by understanding industry trends, local market/economic conditions, and Gilbane's business model to make critical decisions and create competitive advantage. You deploy a strategic mindset when considering solutions to long-term opportunities and risks that may develop in the future. Your core values match Gilbane's: Integrity, Caring, Teamwork, Toughmindedness, Dedication to Excellence, Discipline, Loyalty, and Entrepreneurship. What's in it for you? Gilbane offers employees multi-dimensional training opportunities through a number of resources. While managing your responsibilities to projects, you will be able to enroll in trainings through our award-winning Gilbane University to build leadership and technical skills. In addition, you would work with an experienced team which provides you with the opportunity to learn new industry skills every day. You will protect and promote the interests of both Gilbane and the client in all matters as well as demonstrating the personal characteristics of a developing leader. Directs and coordinates Gilbane's trade contractors and their sub-contractors, to ensure high-quality work that meets the approved project schedule • Supervises and develops the project team, • Manages the project budget for general conditions and Next 150/Site Services, • Develops, documents, and communicates the work plan regarding changes made in the field, • Leads site walks with the owner, architect/engineer, and financial institutions to show construction progress, • Maintains a thorough understanding of contract documents in order to coordinate trades, plan ahead, and proactively anticipate potential problems, • Obtains or verifies that subcontractors obtain all necessary permits for construction purposes, • Follows-up with the appropriate Authorities Having Jurisdiction (AHJ) to schedule and complete necessary inspections, • Acts as primary safety representative in the field, monitoring safety performance and verifying safety compliance with all trades, • Develops safety strategies and drives safety culture across all project personnel, • Conducts maintenance and planning of "workarounds," shutdowns and tie-ins, • Leads contractor meetings, • Accountable for review, completion, and accuracy of daily reports, • Communicates schedule status, updates, and changes to project team and trade contractors, • Coordinates and manages jobsite logistics, • Develops the Quality in Construction (QIC) plan in partnership with the Operations Excellence team, oversees the plan and implements necessary changes, • Resolves jurisdictional disputes with support of Business Unit (BU) leadership, • Establishes credibility among owners, trade contractors, unions, and other project partners by maintaining a fair and trustworthy environment, • Manages Next 150/Site Services material and crew needs, • Mentors and develops junior project team members on project needs, construction knowledge, and business acumen, • Actively engages or leads the Superintendent peer group, • Leads technical trainings for continued education, • Participates in business development, project pursuits, and preconstruction needs, including writing scopes of work and participating in buyout, • Administers Time and Materials (T&M) tracking, • Leads or delegates stretch and flex, and daily huddle, • Leads and develops ground up construction with foundation experience, • Engages in the community, growing and fostering relationships in the local market, • Partners with business development to ensure seamless integration with sales strategies, client capture plans and account plans. Optimizes profit levers and gross profit margin tactics to achieve performance targets on new sales. Leads opportunities to strengthen client, partner, and industry relationships that help position Gilbane as the "Builder of Choice", • Responsible for the career development and coaching of team members, • Fosters a positive and inclusive work environment to motivate and engage team members, • Interprets and translates the organizational strategy, ensuring team understanding of their role in accomplishing strategic goals, • Bachelor's degree in Engineering or Construction Management, • 15+ years of experience on $50 million -$100+ million commercial/industrial construction project(s) or multiple projects in a lead superintendent role, • OSHA 30-hour certified, • STS-C Certification, • First Aid, CPR, AED, Stop the Bleed Training, • Strong technical and communication skills, • Excellent organizational skills, • Excellent problem-solving skills and ability to adapt to changing needs, • Ability to participate in sales process, interviews, and presentations., • Ability to lead in a team environment, • Proficient in Microsoft Office and other industry standard construction software tools, • Construction-document and drawing literate, with knowledge of all phases of construction, • Familiarity with Pull Planning Process, • Experience and proficiency in all divisions of work, methods, materials, scheduling, and cost control, • Strong knowledge and appreciation of construction safety processes and ability to enforce the project safety plan, • Ability to create an environment where "safety first" is the culture and all trades people work with an incident and injury free attitude, • Must be experienced supervising and leading a larger project team The pay ranges from $145,000.00 - $260,000.00 plus benefits and retirement program. Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

A Senior Superintendent position in Tampa, FLis available at Garney Construction. To be considered for this position you must have previous construction experience. • Drive job site safety and establish site safety expectations., • Create 6-week look-ahead schedules and monitor overall project schedule., • Coordinate with project management., • Review job cost and manage labor quantities., • Complete daily and periodic report updates., • Oversee quality control., • Manage subcontractors., • Train craft workers., • Mentor Superintendents., • Degree in Civil Engineering, Construction Management, or other related Field., • 10 Plus years of water and waste water construction expereince with a self-performing gerneral contractor., • Willing to travel and/or relocate., • Employee Stock Ownership Plan (ESOP), • 401K Retirement plan, • Health, dental, vision and life insurance, • Flexible Spending Account (FSA) / Health Savings Account (HSA), • Long-term disability, • Wellness program, • Employee Assistance Plan, • Holidays and PTO

COMPANY OVERVIEW Moss is a national privately held construction firm providing innovative solutions resulting in award-winning projects. With regional offices across the United States, Moss focuses on construction management, solar EPC, design-build, and public-private partnerships. The company's diverse portfolio encompasses a wide range of sectors, including luxury high-rise residential, landmark mixed-use developments, hospitality, K-12 and higher education, justice, solar energy and battery storage, and sports. Moss is ranked by Engineering News-Record as one of the nation's top 65 general contractors, and the #1 ranked solar EPC nationwide. Moss prides itself on a strong entrepreneurial culture that honors safety, quality, client engagement and employee development. Its employees consistently rank Moss as one of the best places to work. POSITION SCOPE AND ORGANIZATIONAL IMPACT Moss' AssistantSuperintendents work in concert with the project team to plan, schedule, organize and direct the construction of large-scale commercial projects. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES * Assists the Superintendent in communicating with subcontractors and employees a consistent level of expectations and direction regarding schedules, construction methods, company policies and procedures, permits, safety, quality control and other performance standards * Collaborates with Superintendent to ensure project site and company assets are secure * Maintains a safe working environment at all times by implementing safety and quality control programs * Perform other related duties as assigned EDUCATION AND WORK EXPERIENCE * Bachelor's in construction management, engineering or related discipline or relevant experience. A specialty in trades such as MEP or concrete can be helpful * 1 - 5 years' experience on commercial construction projects * Exceptional ability to lead and manage others * Initiative and problem-solving skills are a necessity * Computer Proficiency JOB TITLE: ASSISTANT SUPERINTENDENT JOB LOCATION: TAMPA, FL CLASSIFICATION: FULL TIME - EXEMPT - SALARIED REPORTS TO: GENERAL SUPERINTENDENT Moss is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Locations US-FL-Tampa Requisition ID 2026-12420 Category Superintendent The Senior General Superintendent I is responsible for the overall field work on one of the company's most sizable projects, leading a large team of superintendents and ensuring that company policies and procedures are met in regard to safety, scheduling, budget, quality and customer satisfaction. Direct and coordinate Gilbane's trade contractors and their sub-contractors, when required, to ensure they turn out high-quality work that meets the approved project schedule • Supervise the construction of a large project or multiple projects, • Supervise and develop the project team, • Manage the project budget for general conditions and site services, • Develop, document and communicate the work plan regarding changes made in the field, • Maintain a thorough understanding of contract documents to be able to coordinate trades, plan ahead and anticipate potential problems before they arise, • Obtain or verify that the subcontractors obtain all necessary permits for construction purposes, • Monitor safety performance and verify safety compliance with all trades; act as primary safety representative in the field and enforce quality control policies, • Conduct maintenance and planning of "work-arounds," shutdowns and tie-ins, • Lead contractor meetings, oversee daily reports and document using Procore on a regular basis, • Communicate schedule status, updates and changes to Project Team and Trade Contractors, • Coordinate and manage jobsite logistics, • Oversee project quality plan and implement necessary changes., • Resolve jurisdictional disputes, • Establish credibility among Owners, trade contractors, unions etc. by maintaining a fair and trustworthy environment, • Collaborates closely with business development to ensure seamless integration with sales strategies including performance metrics on your assigned projects, pursuits, and client deliverables. Actively participates in opportunities to strengthen client, partner, and industry relationships that position Gilbane as the "Builder of Choice", • Responsible for the career development and coaching of team members, • Fosters a positive and inclusive work environment to motivate and engage team members, • Interprets and translates the organizational strategy, ensuring team understanding of their role in accomplishing strategic goals, • Direct and coordinate Gilbane's trade contractors and their sub-contractors, when required, to ensure they turn out high-quality work that meets the approved project schedule, • Supervise the construction of a large project or multiple projects, • Supervise and develop the project team, • Manage the project budget for general conditions and site services, • Develop, document and communicate the work plan regarding changes made in the field, • Maintain a thorough understanding of contract documents to be able to coordinate trades, plan ahead and anticipate potential problems before they arise, • Obtain or verify that the subcontractors obtain all necessary permits for construction purposes, • Monitor safety performance and verify safety compliance with all trades; act as primary safety representative in the field and enforce quality control policies, • Conduct maintenance and planning of "work-arounds," shutdowns and tie-ins, • Lead contractor meetings, oversee daily reports and document using Procore on a regular basis, • Communicate schedule status, updates and changes to Project Team and Trade Contractors, • Coordinate and manage jobsite logistics, • Oversee project quality plan and implement necessary changes., • Resolve jurisdictional disputes, • Leverage Business Insights - Understand and act on industry trends, local market and economic conditions and our business model to make decisions and create competitive advantage., • Deploy a Strategic Mindset - Take a broad, global perspective when considering proactive solutions to long-term opportunities and risks that might develop in the future., • Display Emotional Intelligence - Demonstrate the capacity to recognize feelings and patterns of behavior and those of others. Manage emotions effectively in ourselves and our relationships., • Build High Performing Teams - Attract, select, develop, recognize, and retain talented individuals. Utilize motivation and discipline to maximize performance and impact on the organization., • Drive Team Accountability - Determine priorities and delegate work; monitor and communicate progress. Establish measures to assess the impact, quality and timeliness of results; praise success and learn from mistakes., • BS or MS degree in Engineering or Construction Management, • 15+ years of experience on a $50 million - $100+ million commercial/industrial healthcare construction projects., • Or equivalent combination of education and experience Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

READY TO JOIN OUR TEAM? Do you currently have aSecret clearance? Do you possess DAWIA Practitioner Level II Equivalency in the Contracting, field? Do you want to be part of a team committed to providing USSOCOM a "one-stop shop" for SOF software-intensive digital applications? If so, then we invite you to read on. ABOUT THIS ROLE St. Michael's is hiring a Senior Contract Specialist to support a Department of Defense (DoD) client. As a Senior Contract Specialist, you will support development, implementation, and control of traditional and non-traditional financial, contractual, and technical aspects of projects/programs through designated phases of the acquisition cycle. You will be in a client-facing role that will benefit from your experience working with DCAA and/or DCMA as necessary, to determine fair and reasonable prices. Our core value of Teamwork will be paramount to this role as you will actively participate in IPTs and guide and assist team members, technical program personnel, sales representatives, local suppliers, and/or contractors on acquisition and business-related issues. LOCATION Tampa, FL (MacDill AFB on-site) WHO YOU ARE • Active Secret Clearance, • Bachelor's degree in business or related field, • DAWIA Practitioner Level II Equivalency in the Contracting field, • Minimum 10 years working in federal government acquisition programs, including:, • Minimum of 8 years of acquisition/contracting experience, • Knowledge of contract data reporting tools, training, and database operations and maintenance, • Knowledge of pre- and post-award procedures sufficient to award and administer firm fixed-price, cost, indefinite delivery, or other contracts of similar complexity, • Knowledge of laws, policies, regulations, and procedures governing acquisitions as well as contracting within the Federal government, which include but are not limited to the Federal Acquisition Regulation (FAR) and the Defense Federal Acquisition Regulation Supplement (DFARS), and Special Operations Forces Federal Acquisition Regulation Supplement (SOFARS)., • Education:Master's degree in business or a related discipline, • Support development, implementation, and control of traditional and non-traditional financial, contractual, and technical aspects of projects/programs through designated phases of the acquisition cycle., • Support the planning of acquisition and contracting strategies for assigned projects/programs within cost, schedule, and performance baselines, • Independently and proficiently conduct appropriate research using the plethora of resources available to the acquisition community (e.g., FAR, other regulatory guidance) to provide informed guidance and applicable courses of action (COAs) to a wide range of customers., • Prepare pre-solicitation documentation to include but not limited to: Determination and Findings (D&F) and Small Business coordination (DD Form 2579)., • Staff pre-solicitation documentation for appropriate review and approvals, and posts applicable notices in the Federal Business Opportunities as required., • Prepare solicitations and amendments in relevant contract writing system) for Procurement Contracting Officer (PCO) review and approval. Staff all solicitation/amendment documentation for appropriate review and approvals, and posts notices in the Federal Business Opportunities as required., • Conduct price and cost analysis. Proficiently use a variety of techniques, including but not limited to working with DCAA and/or DCMA as necessary, to determine fair and reasonable prices., • Review evaluation input from a variety of sources (e.g., technical program and DCAA personnel), provide necessary feedback, and prepare contract negotiation positions (such as PNM and BCM) for PCO review and approval., • Prepare contract award (or agreements) and amendments in PD2 (or relevant writing system) for PCO review and approval. Staff all award/amendment documentation for appropriate review and approvals, and posts notices in the Federal Business Opportunities as required., • Prepare post-award documentation to include but not limited to: contract modifications and memorandums for the record., • Independently and proficiently conduct all contract administration functions retained by USSOCOM., • Establish and maintain quality contract files that are auditable, repeatable, and defendable. At St. Michael's, we believe in rewarding hard work and supporting the people who keep our country safe. As an employee-owned company, you can share in our success through the Employee Stock Ownership Plan (ESOP). We also offer a comprehensive benefits package that includes medical, dental, and vision insurance; a 401(k)-retirement plan; paid time off; and professional development support. Join a company with a conscience - one that invests in your well-being and professional growth. See all our benefits here: ___. This position will remain open until filled. St. Michael's is an Equal Opportunity Employer M/F/Disability/Vet. Reasonable Accommodation - If you need a reasonable accommodation when you apply for a position on our website, please contact us at 703-463-9463 or___ When calling, please ask to speak with Human Resources. When sending an email, please include "Reasonable Accommodation" in the subject line of the email.

Location US-FL-Tampa ID 2026-1805 Category Contracts Position Type Hidden (2049) Remote No Apogee has an exciting new opportunity for a Senior Contract Specialist to support Special Operations Forces Acquisition, Technology and Logistics' (SOF AT&L) Program Executive Office for SOF Digital Applications (SDA). PEO-SDA delivers operational software and digital platforms across multiple networks to automate complex SOF workflows and rapidly close capability gaps. By partnering with USSOCOM S&T and leveraging external investments and best practices, SDA matures and transitions emerging technologies into fielded capabilities while increasing SOF buying power. The organization operates in real-world exercises and experiments to ensure solutions work in complex operational environments, and it advances secure modern delivery through accredited DevSecOps infrastructure, rapid prototyping approaches, and scalable digital ecosystem, intelligence, and mission command applications. This is a full-time position located at MacDill AFB, FL Support development, implementation, and control of traditional and non-traditional financial, contractual, and technical aspects of projects/programs through designated phases of the acquisition cycle. • Support the planning of acquisition and contracting strategies for assigned projects/programs within cost, schedule, and performance baselines, • Independently and proficiently conduct appropriate research using the plethora of resources available to the acquisition community (e.g., FAR, other regulatory guidance) to provide informed guidance and applicable courses of action (COAs) to a wide range of customers., • Prepare pre-solicitation documentation to include, but not limited to: Determination and Findings (D&F) and Small Business coordination (DD Form 2579)., • Staff pre-solicitation documentation for appropriate review and approvals, and posts applicable notices in the Federal Business Opportunities as required., • Prepare solicitations and amendments in Procurement Desktop Defense (PD2) (or relevant contract writing system) for Procurement Contracting Officer (PCO) review and approval. Staff all solicitation/amendment documentation for appropriate review and approvals, and posts notices in the Federal Business Opportunities as required., • Conduct price and cost analysis. Proficiently use a variety of techniques, including but not limited to working with DCAA and/or DCMA as necessary, to determine fair and reasonable prices., • Review evaluation input from a variety of sources (e.g., technical program and DCAA personnel), provide necessary feedback, and prepare contract negotiation positions (such as PNM and BCM) for PCO review and approval., • Prepare contract award (or agreements) and amendments in PD2 (or relevant writing system) for PCO review and approval. Staff all award/amendment documentation for appropriate review and approvals, and posts notices in the Federal Business Opportunities as required., • Prepare post-award documentation to include, but not limited to: contract modifications and memorandums for the record., • Independently and proficiently conduct all contract administration functions retained by USSOCOM., • Establish and maintain quality contract files that are auditable, repeatable, and defendable. Citizenship: Must be a US citizen Clearance: Must possess and maintain a Secret clearance Certifications: DAWIA Practitioner Level II Equivalency, and in the Contracting field, or the ability to obtain within 6 months of hire Education: Bachelor's degree in Business, or a related discipline Years of Experience: Minimum 10 years working in federal government acquisition programs, including: • Minimum of 8 years of acquisition/contracting experience, • Knowledge of contract data reporting tools, training, and database operations and maintenance, including working knowledge of the Procurement Desktop Defense (PD2) contract writing software, • Knowledge of pre- and post-award procedures sufficient to award and administer firm fixed-price, cost, indefinite delivery, or other contracts of similar complexity, • Knowledge of laws, policies, regulations, and procedures governing acquisitions as well as contracting within the Federal government, which include but are not limited to the Federal Acquisition Regulation (FAR) and the Defense Federal Acquisition Regulation Supplement (DFARS), and Special Operations Forces Federal Acquisition Regulation Supplement (SOFARS). Education: Master's Degree in Business or a related discipline Years of Experience: Minimum of 6 years of acquisition/contracting experience with a minimum of 1 year of contracting experience within USSOCOM Additional Information Location: MacDill AFB, FL On-site/Hybrid/Remote: On-Site Travel: 10%

Description Our customer, the Defense Information Systems Agency (DISA), provides, operates, and assures command and control of the Defense Information System Network (DISN) services to its customers, the department of Defense (DoD) and national security organizations. This position directly supports the DISA-provided capabilities and services. The Leidos Digital Modernization Sector/Global Solutions Management-Operations II (GSMO-II) contract has an opening for a Network Performance & Reliability Engineer II at MacDill AFB, FL. The Network Engineer will perform sustainment, performance, maintenance, Problem and Change management services to help ensure secure, reliable, and uninterrupted availability of the Department of Defense networks. This position requires U.S. citizenship and an active Secret clearance to start. Responsible for assisting with the following duties: • Maintain, deploy, and troubleshoot databases and data ingestion scripts., • Assist data engineers with quality control of data, data collection processes, and testing/implementing data collection and process improvements, • Aid senior team members in supporting GSMO Program driven Innovations development, integration, and continuous improvement by leveraging, maintaining, and in the creation/maintenance of various tools., • Perform engineering tasks related to the design, performance management/analysis, implementation, and integration of network changes and sustainment of customer systems in an Wide Area Network environment., • Conduct planning and performance of analytical research, design development, and other tasks to align with customer specifications., • Control network systems & tools to ensure 99% or better system uptime and connectivity., • Provide ad-hoc engineering support, statistics/data gathering, modeling, creating/updating flowcharts and providing forecasts based on trending analysis based on Engineering documents and experience., • Ensure efficient delivery of contract capabilities using industry standards and repeatable processes., • Mitigate risks, control costs and schedule variance, and effectively manage large scale, integrated projects., • Perform a variety of analytical tasks which include hardware and software design and implementation. Basic Qualifications: • Experience with coding in languages including but not limited to Expect, Python, SQL, and/or Perl, • Currently possess DoD 8750 certification at IAT level II, Security+ CE or equivalent to meet requirement., • Experience with Kibana, Service Now, SQL, Web development, Python, UI UX, or Databases., • Experience working with large sets of data from either service provider or enterprise networks., • Experience monitoring, troubleshooting, and/or configuring IP or Transport Network technologies., • Experience with ports and protocols., • Experience analyzing network KPIs, VLAN, routing, IP addressing and sub-netting and/or Exposure to troubleshooting, assessment, root cause analysis, and restoration of Optical networks, • Experience with IP or Transport Technology., • Currently possess an active DoD Secret security clearance. Preferred Qualifications: • Familiarization of DOD regulations and directives., • Python, Pearl or other language scripting capable of pull information from Cisco/Juniper routers and other network devices., • Proficient in the tools Service Now and/or Kibana is a plus, • Physical cable plant and wiring experience., • Certifications with major vendors such as Cisco, Elastic, or ITIL4 are a strong plus., • Excellent project, technical, interpersonal, presentation, Performance analytics, and problem management skills., • Extensive network integration experience for a variety of network protocol standards., • Ability to communicate orally, and in writing, detailed technical information on troubleshooting and implementation efforts., • Experience with Cisco IOS XR, JUNOS, and Cisco IOS codes., • IPSEC configuration & troubleshooting experience., • Proficient in Ciena, Cisco, and/or Juniper configuration, troubleshooting, and design. Required Education and Experience: Requires BS degree and 2-4 years of prior relevant experience or Masters with less than 2 years of prior relevant experience. Specific experience, education and training may be considered in lieu of degree. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. February 13, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Featuredjob

About Tampa Family Health Centers At Tampa Family Health Centers, healthcare is more than a service, it is our mission. As a Federally Qualified Health Center (FQHC), we provide quality, compassionate, and accessible care to a culturally diverse community across Hillsborough County. Our team is driven by innovation, collaboration, and a commitment to positive change. We are proud to be recognized as a leader in empathy-driven, patient-centered care. Joining TFHC means becoming part of a mission-driven organization where you will receive the support, training, and recognition needed to grow while making a meaningful impact in the community. Position Summary We are seeking a Nurse Manager - Registered Nurse (RN) to join our leadership team. This role is responsible for overseeing clinical operations, supporting staff development, and ensuring high-quality, patient-centered care across the health center. The Nurse Manager will provide leadership to clinical support staff, drive operational excellence, and partner closely with providers and leadership to ensure efficient, compliant, and compassionate care delivery. Essential Responsibilities * Oversee daily health center operations across clinical and support teams * Monitor staff schedules, patient flow, and clinic efficiency * Set clear expectations and provide leadership to clinical support staff * Support providers in delivering high-quality patient care * Ensure timely and accurate completion of staff and provider workflows * Educate staff on policy updates, insurance changes, and process improvements * Lead team meetings, huddles, and maintain accurate documentation * Address patient concerns and support service recovery efforts * Maintain a safe, clean, and compliant clinical environment * Oversee equipment usage, maintenance, and regulatory compliance * Supervise staff performance, scheduling, and timekeeping * Conduct evaluations, coaching, and corrective actions as needed * Ensure staff credentials and certifications remain current * Monitor quality metrics, audits, and compliance with AAAHC standards * Manage inventory, supplies, and department budget needs * Stay current with regulatory requirements including OSHA, NCQA, and CMS * Serve as subject matter expert for the Vaccines for Children (VFC) program * Participate in community outreach and engagement activities General Responsibilities * Support and model TFHC's mission, vision, and values * Ensure compliance with HIPAA, OSHA, and accreditation standards * Maintain infection control and safety protocols * Complete administrative documentation and personnel actions * Perform other duties as assigned Qualifications * Graduate of an accredited nursing program * Active and unrestricted Florida license as a Registered Nurse (RN) required * Current BLS certification * Minimum of 2 years of supervisory or leadership experience preferred * Experience in primary care, community health, or public health preferred Skills & Abilities * Strong leadership, communication, and interpersonal skills * Ability to manage multiple priorities in a fast-paced environment * Experience with EHR systems and clinical workflows * Ability to mentor, develop, and motivate staff * Strong problem-solving and operational management skills Benefits & Rewards Tampa Family Health Centers offers a highly competitive and comprehensive benefits package designed to support your health, financial well-being, and long-term career growth: * Medical, dental, and vision insurance effective after 90 days of employment * FTCA malpractice coverage (company-paid) * Life insurance * Long-term disability insurance * Paid Time Off (PTO) plus 7 paid company holidays * 401(k) eligibility with a employer contribution * Employee discount program (travel, entertainment, and more) Loan Repayment & Financial Support: * Eligible for the Nurse Corps Loan Repayment Program, which can provide significant student loan assistance for qualified candidates working in underserved communities Why Join Tampa Family Health Centers? At TFHC, you are not just stepping into a leadership role, you are joining an organization committed to making a real difference. You will have the opportunity to lead teams, improve patient outcomes, and grow your career while serving a community that truly values accessible, high-quality care. Join Our Team If you are ready to lead, inspire, and make a meaningful impact in healthcare, we encourage you to apply today.

Job DescriptionDescription: The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business – not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that’s just before lunchtime. Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity?, 2. Does the idea of autonomy and independence excite me?, 3. Can I have fun, while keeping it safe and efficient?, 4. Am I looking for a career family and not just a job?, 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. • Apprentice Level (Level I) – best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed., • Service Professional Level (Level II) – this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field., • Senior Level (Level III) – possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field. What You’ll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn’t have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements: What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: • 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers., • Ability to repair industrial facilities, including doors, loading docks, and dock-leveler’s., • Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you!, • Ability to take direction and work independently while on the road for hours each day., • Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must., • Technical school training and OEM certifications are desired but not required., • Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. We thought you’d never ask. Link to benefits overview: Benefits The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. In addition to those benefits, Service Professionals can look forward to: • Competitive pay, including quarterly bonus incentives, • Uniform and boot allowance, • Training and the opportunity for growth, • Company issued truck for work travel, can be taken home as well, • Autonomy and independence, • Competitive PTO and Paid Holidays Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group’s Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company’s good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.