Sheet metal jobs in Chula Vista, CaliforniaCreate job alerts

Job DescriptionDescription: AP Precision Metals, Inc. is San Diego's leading commercial sheet and plate metal fabricator. We are a valuable and long-term supplier to some of San Diego's biggest OEMs, providing a wide range of sheet metal components, weldments, and other metal assemblies. Our entire operation is located at our 40,000 sq. ft. factory located 10 minutes north of the Tijuana/San Diego border and a 5 minute walk from the Iris Trolley station. The company was founded in 1999 by Lane Litke and Victor Miller, and thanks to reliable and honest leadership and the hard work of our entire team, AP Precision has grown an average of 20% per year for the last 25 years. Over the last two decades, we have invested millions of dollars in cutting-edge manufacturing machines and made equally significant investments in employee training and advancement. Many of our employees have been with us for 5, 10, and even 15 years. A generous IRA program, healthcare, shift differentials for 2nd shift, and a focus on regular training have allowed us to take many employees from unskilled labor to high-paid technicians. We take pride in the customers we serve and just as much pride in the health and success of our team and their families. The following pages contain job descriptions for key positions at AP Precision Metals. Each description includes purpose, responsibilities, qualifications, and pay ranges. General requirements across all positions include: • Ability to work safely in a manufacturing environment, • Strong commitment to quality and ISO9001 compliance, • Ability to stand for extended periods and lift up to 25-50 pounds as needed, • Reliability, punctuality, and teamwork, • Adherence to company policies, safety standards, and 5S/housekeeping practices Job Description – Welding Operator Job Title: Welding Operator Department: Production Reports To: Production Supervisor Pay Rate: $20-$25 per hour Purpose The Welding Operator is responsible for performing welding and related fabrication operations on sheet metal and structural components in accordance with work orders, blueprints, and company quality standards. This position ensures welded parts meet dimensional, structural, and cosmetic requirements while maintaining compliance with ISO9001 procedures, safety standards, and production schedules. Requirements: Primary Duties • Read and interpret technical drawings, blueprints, and welding symbols prior to starting work., • Perform MIG, TIG, and spot welding operations on steel, stainless steel, and aluminum materials., • Weld components to tolerances specified by technical prints, with emphasis on sheet metal gauges (14GA, 10GA, .125, .250, and .500 steel, stainless and aluminum)., • Inspect welded parts to ensure compliance with tolerances, dimensions, and quality standards., • Prepare, cut, fit, and position materials for welding., • Complete weld documentation and production records in accordance with ISO9001 requirements., • Maintain welding equipment, fixtures, and hand tools in proper working condition., • Follow company safety rules, PPE requirements, and housekeeping/5S standards. Additional Duties (as required) • Operate other light sheet metal fabrication machinery., • Assist in fitting and assembly of welded or fabricated components., • Operate or assist in programming robotic welding cells (Fanuc, UR, Cobot) when required., • Support cross-training and other production operations as directed., • Participate in continuous improvement initiatives and training programs. Qualifications • Proven welding experience in a production or metal fabrication environment., • Proficiency with MIG welding; TIG welding experience preferred., • Ability to weld steel, stainless steel, and aluminum in multiple thicknesses (14GA to .500)., • Experience with spot welding operations., • Ability to read and interpret blueprints, technical drawings, and welding symbols., • Familiarity with welding inspection techniques, gauges, and measurement tools., • Knowledge of weld quality requirements, material properties, and process standards., • Robotic welding experience (Fanuc, UR, or Cobot) considered an asset., • Certification in welding (AWS or equivalent) preferred., • Strong attention to detail, accuracy, and adherence to quality standards., • Forklift operation and material handling experience desirable. Physical Requirements • Ability to lift up to 25 pounds., • Ability to stand for extended periods while performing inspections., • Comfortable working in a manufacturing environment with exposure to noise, machinery, and sheet metal handling.

Job Description WELDER/FABRICATOR Job descriptionAbout us We are professional, agile and our goal is to established a solid reputation for quality utilizing state-of-the-art technology in the sheet metal fabrication industry since 1969. Specializing in applications for computers, electronics, medical and biomedical products, Harcon is an impressively diversified metal fabrication plant. Harcon's broad based expertise caters to the quality requirements and demands of these highly technological fields. Our CAD/CAM system is directly linked to the manufacturing machinery providing accurate response to customer drawings and specifications.. Our work environment includes: Modern shop Duties/Responsibilities: · Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job. · Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment. · Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage. · Prepares, assembles, and tacks weld parts and surfaces to be welded. · Maintains, organizes, and cleans equipment and the work area. · Notifies supervisor when faulty equipment or defective materials are discovered. · Performs other related duties as assigned. Required Skills/Abilities: · Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. · Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints. · Excellent ability to read and listen to assignments given in a variety of forms. · Basic understanding of mathematics as related to welding assignments. Education and Experience: · Completion of a formal apprenticeship OR successful completion of an in-company, three-year training program required. Physical Requirements: · Must be able to weld components that are vertical, flat, or overhead. · Must have enough manual dexterity and stability as required for precision work. · Must be able to see details at close range. · Must be able to lift up to 15 pounds at times. · Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. Job Type: Full-time Expected hours: 40 per week

Job Description Essel is currently seeking a qualified Journeyman HVAC Installer to join our team. This position involves the installation of heating, ventilation, air conditioning, and refrigeration systems for residential and light commercial projects. The ideal candidate will have a strong background in HVAC system installation and be committed to providing quality service to our customers. Primary job responsibilities will be conducted on both day and night shifts. Journeyman HVAC Installer Night Shift and Day Shift $30 - 32/ hour Key Responsibilities: • Sheet metal, spiral duct, square duct installation., • Install, maintain, and troubleshoot HVAC systems according to manufacturer specifications and local codes., • Work with project managers and other team members to ensure timely completion of installations., • Perform routine maintenance and repairs on existing HVAC systems., • Read and interpret blueprints, schematics, and technical drawings., • Ensure proper handling and disposal of materials and refrigerants in compliance with environmental regulations., • Provide excellent customer service and communicate effectively with clients regarding their HVAC needs. Requirements Qualifications: • Tools Needed: Sawzall, cordless drill, snips, hammer, • High school diploma or equivalent., • Valid HVAC Journeyman license or equivalent years of experience., • 2-5 years of experience in HVAC system installation and service., • Strong knowledge of HVAC systems, including ductwork, refrigeration, and electrical components., • Excellent problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • Valid driver's license and good driving record., • Ability to lift heavy objects and work in various physical conditions. If you are an experienced Journeyman HVAC Installer looking to advance your career with a dependable and growing company, we encourage you to apply! Benefits industry standard benefits

Job Description We’re looking for a detail-oriented, experienced, and licensed HVAC installation technician to join our company. You'll be responsible for visiting homes and businesses, assessing blueprints, codes, and manuals to install a variety of HVAC equipment. You’ll also be asked to install heating, cooling, indoor air quality, refrigerant, and control systems. The ideal candidate has the technical skills to install, troubleshoot, and diagnose all equipment and is an effective problem solver and communicator. Ready to join our growing HVAC company? Start your application today! Compensation: $25 - $58 hourly Responsibilities: • Maintain records of completed projects and parts used, • Advise clients on how to properly maintain their new equipment, • Attach pipes or tubing from the fuel, water, or refrigerant source to HVAC equipment, • Inspect all pipes, tubing joints, and connections for leaks, • Set up all heating, air conditioning, air quality, refrigeration, and control systems, • Water Source Heat Pump systems (Horizontal and Vertical), • Mechanical yards, cooling towers (40 to 250+ tons), Boilers, Pumps, VFD’s, • Chillers, Air, and Water Cooled (small to large), • Piping systems. Condenser water, chill water, hot water, refrigeration, condensate, • Ventilation systems: Conditioned single-pass or 100% outside air (OA), Exhausted Systems (general, environmental, chemical, process), • All installations, repairs, and maintenance, • 4 Pipe systems. Chill water/Heating hot water. Units, piping systems, • All rooftop package DX and conventional split systems, • VRF or VRV (variable refrigerant system) Heat recovery full installation. (Certifications are a bonus), • VAV (Variable air volume): VAV units, heating hot water systems, • Duct System: Crimp, S&D, TDC, Coated PVS, Stainless Steel, • Experience in sheet metal fabrication Qualifications: • High school diploma or GED required, • Must have EPA 608 refrigerant recovery certification, • Attended HVAC school for degree and 2+ years of field experience as an HVAC installer, • Strong math, problem-solving, and communication skills, • Working knowledge of low voltage electrical wiring and high voltage connections About Company We are a leading commercial HVAC company based in the heart of San Diego (Kearny Mesa). Rooted in our family-owned traditions, we have been serving San Diego for over 43 years. With dedication to excellence and a commitment to innovation, we strive to deliver exceptional results for clients. Benefits: • Comprehensive medical benefits – the company covers up to 100% of employee health insurance premiums, depending on the selected plan, • Dental and vision insurance, • 401(k) retirement plan with company matching, • Life insurance, • Paid time off, • Flexible schedule

Job DescriptionDescription: Job Summary: Participate in the sheet metal installation process Essential Functions: 1. Knowledge and ability to install all types of duct (square, rectangular, oval, and round), 2. Ability to follow provided layout and work in an independent manner, 3. Understanding and knowledge of industry standard installation requirements such as hanger spacing, strap size, and flex duct length, 4. Capability of working independently once given a task and material, 5. Understand how to properly utilize hand and power tools to manipulate material in a manner required for installation, 6. In possession of all their own hand and power tools, 7. Ability to comfortably work at elevated levels in a safe manner, 8. Other duties as assigned. Knowledge, Skill and Experience: Minimum Education (or substitute experience) required: High school diploma or equivalent work experience. Complete kit of hand and power tools to accomplish assigned work Minimum Experience required: 5+ years commercial HVAC installation and Air Balance Requirements: Skills Required: Proficiency with the use of hand and power tools Certifications in the use of scissor/fork lifts, boom lifts, and fall protection equipment Ability to layout duct runs and maintain required elevations and clearances Proficiency in generating material lists and detailing to-be-fabricated ductwork Effective communication skills. Ability to problem solve in a fast-paced environment. Ability to effectively represent National Air & Energy and communicate with customers and others at varying technical levels. Physical Requirements: Frequent bending, grasping, reaching, standing, pushing, pulling and sitting. Ladder and scissor lift use Frequent kneeling, squatting and climbing stairs. Ability to lift 50 pounds. The job is assigned to an indoor and outdoor environment with variable noise levels, uncontrolled temperature conditions, and no direct exposure to hazardous substances.

Job Description Overview We are seeking skilled, journeyman-level roofers to join our high-performing team. This position is a demanding, high-reward role for individuals with extensive experience in both tile and asphalt roofing systems. The work is compensated on a piece-rate basis, and we offer a clear, competitive rate per square for all completed work. Key Responsibilities • Installation Expertise: Journeyman level experience in installation of various roofing materials, with a specific emphasis and mandatory experience in both asphalt shingles and tile roofing (concrete, clay, terracotta, etc.)., • Quality Workmanship: Ensure all installations meet or exceed manufacturer specifications and local building codes, paying close attention to detail on flashings, valleys, and sealing., • Safety & Compliance: A mandatory commitment to working safely is required. Adhere strictly to all safety protocols and regulations (e.g., OSHA), ensuring a safe work environment for yourself and all crew members., • Efficiency: Work efficiently and effectively to maximize piece-rate earnings while maintaining the highest quality standards., • Material Handling: Capably handle various roofing materials, which are heavy and require careful handling to avoid damage., • Problem-Solving: Address unexpected challenges and complexities on job sites (e.g., steep pitches, multiple penetrations, multi-story homes) with minimal supervision. Qualifications & Requirements • Experience: Proven journeyman-level experience (4+ years) in residential and/or commercial roofing, with a strong portfolio of completed projects., • Mandatory Skills: Must have hands-on experience and expertise in installing both tile and asphalt shingle roofing systems., • Safety Oriented: Must be highly safety-oriented and willing to follow all company and regulatory safety guidelines without exception., • Physical Stamina: The role requires significant physical exertion, including heavy lifting, climbing ladders, and working at heights in various weather conditions., • Equipment: Must have a valid driver's license and reliable transportation to various job sites., • Work Ethic: A strong work ethic, reliability, and the ability to work both independently and as a valuable part of a crew. Plus: • Sheetmetal Experience: Experience in installing or fabricating sheet-metal for roofing applications (e.g., flashing, coping, custom metal work) is a significant advantage. Compensation Details • Payment Structure: This is a piece-rate position, paid per square completed and inspected., • Compensation Rate: A flat rate for labor across all standard projects (asphalt and tile). Benefits While pay is piece-rate, we offer the following benefits to our valued team members: • Health Insurance/Dental/Vision -, • Retirement plan like a 401(k), • Dental

Job DescriptionDescription: Production Support • Grind, deburr, edge-break, and finish metal parts using hand tools and powered equipment., • Install PEM hardware using Pemserter, Haeger, or similar insertion equipment., • Countersink, drill, and prepare parts according to work instructions., • Assist with light assembly of manufactured components., • Package, label, and prepare finished products for shipment. Material Handling, • Move raw materials, work-in-process, and finished products throughout the facility., • Stage production jobs for fabrication, welding, powder coating, assembly, and shipping., • Assist with loading and unloading materials and delivery vehicles., • Operate pallet jacks, forklifts, and other material handling equipment (training provided if qualified). Quality & Safety, • Perform basic visual inspections of finished parts to ensure quality standards are met., • Follow work instructions, quality standards, and production schedules., • Maintain clean, organized work areas in accordance with company housekeeping and 5S standards., • Follow all safety procedures and properly use required personal protective equipment (PPE). Team Support, • Assist multiple departments as production needs change., • Participate in cross-training opportunities to expand manufacturing skills., • Support continuous improvement initiatives., • Work collaboratively with supervisors and fellow production employees. Job Description – General Labor / Production Associate Job Title: General Labor / Production Associate Department: Production Reports To: Production Supervisor Pay Rate: $18-$24 per hour Requirements: Experience & Skills • Manufacturing, warehouse, construction, automotive, or industrial experience is preferred but not required., • Entry-level applicants with a strong work ethic and willingness to learn are encouraged to apply., • Ability to safely use hand tools and basic shop equipment., • Mechanical aptitude and the ability to follow written and verbal work instructions., • Forklift experience or certification is a plus but not required. Personal Qualifications, • Reliable, punctual, and dependable., • Positive attitude with a willingness to learn new skills., • Strong attention to detail and commitment to producing quality work., • Ability to work independently as well as part of a team., • Ability to maintain productivity in a fast-paced manufacturing environment. Physical Requirements, • Ability to safely perform the essential functions of the position, with or without reasonable accommodation., • Ability to regularly lift, carry, and move materials weighing up to 25 pounds, and occasionally up to 50 pounds with assistance or appropriate lifting equipment., • Ability to stand, walk, bend, reach, kneel, and move throughout the manufacturing facility for extended periods during scheduled shifts., • Ability to safely use hand tools and perform repetitive production tasks throughout the workday., • Ability to wear required personal protective equipment (PPE), including safety glasses, gloves, hearing protection, steel-toe footwear, and respirators where required., • Ability to safely work around industrial equipment, forklifts, cranes, sheet metal, and moving machinery., • Ability to work in a typical manufacturing environment with varying temperatures, industrial noise, dust, and exposure to metal fabrication processes.

Job DescriptionManufacturing Engineer Position Overview We are seeking a Mechanical Engineer to design, develop, and scale mechanical systems and assemblies used in vacuum and instrument applications. The role will focus on integrating sensors and instrumentation, packaging MEMS devices, and developing tooling and manufacturing processes to transition prototypes into robust, high-volume production. The ideal candidate balances hands-on prototyping and testing with strong engineering documentation and collaboration across design, manufacturing, and quality teams. Key Responsibilities • Design and develop mechanical components, assemblies, fixtures, and tooling for vacuum systems, instruments, and sensor packages., • Create and maintain detailed CAD models, mechanical drawings, BOMs, and manufacturing documentation using SolidWorks/Creo or equivalent., • Integrate sensors, electronics, and MEMS devices into robust packaging that meets functional, environmental, and manufacturability requirements., • Develop, specify, and validate vacuum-rated components and subsystems, including seals, feedthroughs, valves, and enclosures., • Collaborate with manufacturing and suppliers to scale processes from prototype to volume production; develop assembly processes, work instructions, and quality controls., • Design and iterate prototypes; plan and execute mechanical, environmental, and performance testing; analyze results and implement design improvements., • Develop tooling, jigs, and fixturing for assembly, test, and calibration operations; support equipment selection and commissioning., • Perform tolerance analysis, failure mode assessments (DFMEA), and design for manufacturability/reliability (DFM/DFR) to ensure robust product performance., • Work cross-functionally with electrical, firmware, product, and quality teams to meet product requirements, schedules, and regulatory constraints., • Provide technical leadership and mentorship to junior engineers and technicians, and support supplier qualification and vendor negotiations. Qualifications • Bachelors degree in Mechanical Engineering or related field; MS preferred., • 5+ years of mechanical engineering experience supporting vacuum systems, scientific instruments, sensors, or MEMS packaging., • Hands-on experience with vacuum hardware, including understanding of seals, flanges, feedthroughs, and vacuum-compatible materials., • Experience with microelectronics/MEMS packaging, sensor integration, and precision assemblies., • Proven experience scaling designs to manufacturing: tooling development, assembly process creation, and supplier management., • Proficiency in 3D CAD (SolidWorks, Creo or similar) and drawings to ASME Y14.5/GD&T standards; experience with FEA and tolerance stack-up analysis a plus., • Familiarity with machining, sheet metal fabrication, thin-film handling, and cleanroom manufacturing practices., • Strong problem-solving skills, data-driven test and validation approach, and experience with test equipment and metrology tools., • Excellent communication skills and ability to work effectively in cross-functional teams, with experience leading projects to successful production release. Benefits • Medical, • Dental, • Vision, • PTO - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 07/15/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.Everforth CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications, and a virtual recruiter as part of the application process. A human recruiter reviews all results. Click here for details on our virtual recruiter . Everforth CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. Everforth CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements. Salary $90000 - $130000 USD per year

Job DescriptionDescription: AP Precision Metals, Inc. is San Diego's leading commercial sheet and plate metal fabricator. We are a valuable and long-term supplier to some of San Diego's biggest OEMs, providing a wide range of sheet metal components, weldments, and other metal assemblies. Our entire operation is located at our 40,000 sq. ft. factory located 10 minutes north of the Tijuana/San Diego border and a 5 minute walk from the Iris Trolley station. The company was founded in 1999 by Lane Litke and Victor Miller, and thanks to reliable and honest leadership and the hard work of our entire team, AP Precision has grown an average of 20% per year for the last 25 years. Over the last two decades, we have invested millions of dollars in cutting-edge manufacturing machines and made equally significant investments in employee training and advancement. Many of our employees have been with us for 5, 10, and even 15 years. A generous IRA program, healthcare, shift differentials for 2nd shift, and a focus on regular training have allowed us to take many employees from unskilled labor to high-paid technicians. We take pride in the customers we serve and just as much pride in the health and success of our team and their families. The following pages contain job descriptions for key positions at AP Precision Metals. Each description includes purpose, responsibilities, qualifications, and pay ranges. General requirements across all positions include: • Ability to work safely in a manufacturing environment, • Strong commitment to quality and ISO9001 compliance, • Ability to stand for extended periods and lift up to 25-50 pounds as needed, • Reliability, punctuality, and teamwork, • Adherence to company policies, safety standards, and 5S/housekeeping practices Work Environment • Full-time, in-person role at our South San Diego (Otay Mesa) manufacturing facility., • Collaborative production environment with daily interaction between fabrication, welding, assembly, and engineering teams. Benefits -Competitive compensation package -Health, dental, and vision insurance -IRA retirement plan -Paid time off and company holidays -Stable long-term employment with a growing manufacturing company Job Description – Press Brake Operator Job Title: Press Brake Operator Department: Production Reports To: Production Supervisor Pay Rate: $20-$28 per hour Purpose The Press Brake Operator is responsible for setting up, operating, and maintaining press brake machines to bend and form sheet metal components in accordance with blueprints, work orders, and company quality standards. This position ensures all parts are produced to tolerance while following ISO9001 requirements, production schedules, and safety standards. Requirements: Primary Duties • Set up and operate press brake equipment to produce small and medium-sized parts per work instructions and technical drawings., • Independently cycle parts, ensuring accuracy and repeatability. (Nearly all AP Precision parts can be cycled by a single operator.), • Select and install appropriate tooling, back gauges, and machine settings to achieve required bends., • Verify part quality by measuring dimensions and angles against prints and tolerances., • Record production and inspection data in compliance with ISO9001 requirements., • Perform routine equipment checks and basic maintenance to ensure machine readiness., • Follow safety procedures, PPE requirements, and 5S/housekeeping standards. Additional Duties (as required) • Operate other light sheet metal fabrication machinery., • Assist in other fabrication operations (e.g., punching, shearing, or laser support)., • Participate in cross-training initiatives and continuous improvement programs. Qualifications • Experience operating press brake machines in a metal fabrication environment., • Ability to read and interpret blueprints, bend drawings, and work orders., • Knowledge of sheet metal forming processes and tolerances., • Familiarity with precision measuring tools (calipers, protractors, gauges)., • Strong attention to detail and quality requirements., • Ability to work safely and independently in a production environment., • Forklift experience desirable., • ISO9001 experience preferred. Physical Requirements • Ability to lift up to 25 pounds., • Ability to stand for extended periods while performing inspections., • Comfortable working in a manufacturing environment with exposure to noise, machinery, and sheet metal handling.

Global Market and Technology Leader seeking a Traveling Service Technician This Jobot Job is hosted by: Amber Wood Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $26 - $40 per hour A bit about us: Worldwide market and technology leader for metal sawing machines, long material and sheet metal storage systems. Why join us? • Ever changing tasks and environments, creates a interesting and challenging environment, • Tools, communication devices and vehicle supplied as needed, • Performance-driven and competitive pay, • 401k and Majority company paid health insurance, full paid dental and vision plan Service techs have a company van with a gas card. All other travel related expenses are charged to a company paid credit card. Job Details Will be responsible for TRAVELING locally to client sites to repair industrial equipment. • Responsible for installations, maintenance and troubleshooting of automated storage and retrieval systems as well as sawing equipment, • Performing the above tasks in a safe and craftsman-like manner., • Work on electrical system, low and high voltage 24V to 480V, • Troubleshoot, change and install electrical components, motors, drives, HMI, PLCs as well as sensors and electronic actors n Inspect, replace and install mechanical components like chains, sprockets, bearings and shafts., • Inspect, change and rebuild hydraulic components from hoses to valves and pumps or motors., • Performance of routine inspections and preventative maintenance tasks on any of the machinery Key Duties and Responsibilities: Perform daily/weekly inspections as assigned by site supervisor. Perform daily/weekly inspections as assigned by the site supervisor. systems and be familiar with lockout/tagout procedures. Must be familiar with working safely around high and low-voltage systems and be familiar with lockout/tagout procedures. Maintain a clean and safe work environment and maintain clean and effective tools. routine maintenance as assigned by the site supervisor. as assigned by the site supervisor. Clean and lubricate vehicles, machinery and components to ensure safe and efficient operation. Must be able to communicate, on the forms provided, the required documentation for repairs and maintenance performed. Examine parts, checking for breakage, excessive wear, or other damage, and completing routine maintenance as assigned by site supervisor. complete repairs. estimated time frame to complete repairs. Determine parts and materials needed and requisition from the site supervisor. Plan and lay out repair work using diagrams, drawings, blueprints, maintenance manuals and schematic diagrams. Disassemble broken or defective equipment to facilitate repair; reassemble equipment when repairs are complete. Position vehicles, equipment, physical structures and other objects for assembly or installation, using hand tools, power tools, and moving equipment. Transfer tools, parts, equipment, and supplies to and from workstations and other warehouse areas. Safely adjust, connect or disconnect wiring, piping, tubing and other parts. Safely connect wire to motors, fixtures, and other electrical equipment, replacing switches and fuses, and splicing wire as necessary. Locate damaged air and hydraulic pipes or hoses on machines for repair. Install and repair electronic components of equipment as necessary. Repair, adjust and replace gauges, valves and other regulating equipment. Adjust, align and balance equipment as necessary. Test machines after repair. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches to precision measuring instruments and electrical and electronic testing devices, grinders, welding and soldering equipment. Inspect, repair and replace motors as necessary for material handling systems, material moving equipment and sawing machinery. Weld machinery parts. Fabricate and weld brackets, supports, other necessary devices. Use programming devices for fault tracking and parameterization of electrical control devices such as PLC’s and operating devices. Use specialized tools such as databus testing devices and other diagnostic devices as necessary. Participate in all quality, safety training and job certification requirements for this position. Comply with all company policies and procedures. Perform any additional duties that may be assigned, such as visiting other customer sites. Maintain a good attitude and maintain positive customer relations. Requirements High School Diploma/GED and 1 year technical school, or 4 years on the job training in an industrial maintenance environment. Must be able to use multi-meter for electrical troubleshooting, power tools for mechanical repairs, programmable logic controller for troubleshooting. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Ability to write routine reports and correspondence Ability to speak effectively before groups of customers or employees of the organization Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rates, ratios, and percentages, and to draw and interpret bar graphs. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must have a valid driver’s license and an acceptable driving record. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Join our fast-paced and passionate team as a Senior Electro-Mechanical Engineer. As we scale, you will be instrumental in building our foundation from the ground up. This is a dynamic, hands-on role for a self-starter who thrives in a fluid startup environment. You'll have the opportunity to work on cutting edge technologies, work closely with leadership, and develop and implement engineering practices that support our mission and growth. Your key responsibilities are as follows: • Work independently and in a team while communicating with the manager, project engineer and the teammates. Will mentor junior engineers., • Execute complex engineering tasks involving planning, preparation, data/information collection and analysis and decision-making in a process involving peer reviews and documentation of the results., • Use tenacity, patience, self-discipline and passion for excellence to assure accuracy of execution schedule, data quality/integrity, conformance to company best practices, clarity in communication and documentation., • Use every opportunity to grow competency through mentorship, curiosity, communication, exposure and initiative. Requirements • This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Experience: • A bachelor’s degree in mechanical engineering, Physics, or a related field. Masters preferred., • Minimum of 5 years of relevant experience, ideally within a startup or technology company. Skills and Responsibilities: Interconnect & Component Specification • Specify and source high-density electrical connectors, RF co-axial connectors, optical fiber connectors (e.g., MPO, LC), and hybrid electro-optical backplanes., • Define cable bundle characteristics, including wire gauge (AWG), shielding (EMI/RFI protection), bend radii (especially critical for fiber optics), and jacket materials appropriate for thermal and regulatory compliance., • Manage and maintain the Electro-Mechanical Bill of Materials (BOM), ensuring all connectors, strain reliefs, and cable assemblies are fully documented and sourced. Electro-Mechanical Integration & Cable Routing • Design complex 3D routing pathways for both electrical power/signal cabling and sensitive fiber optic patch cords within standard 19-inch racks or custom enclosures., • Implement effective strain relief, cable management arms, and routing accessories to ensure reliability during system servicing and slide-out rack operations., • Incorporate strict Electro-Magnetic Interference (EMI) shielding and segregation practices to prevent power cables from disrupting sensitive photonics signals. Cross-Functional EE/ME Collaboration • Act as the primary engineering bridge to the Electrical Engineering team, co-designing physical PCBs to enclosure interfaces, ensuring pinouts match physical connector layouts, and ensuring adequate high stability cooling., • Translate electrical schematics and block diagrams into physical wire lists, cable drawings, and schematic-to-3D routing layouts., • Collaborate on power distribution unit (PDU) placement, busbar routing, and grounding/bonding strategies for the entire rack. Structural & Thermal Design for Photonics • Design rugged sheet metal rack enclosures, sub-chassis, and mounting brackets capable of supporting heavy components while minimizing structural vibration to internal photonics modules., • Collaborate on thermal management strategies (forced air, liquid cooling, or thermoelectric coolers) to ensure the precise temperature stability required by photonics components., • Conduct or supervise tolerance stack-up analyses for high-density blind-mate connections on backplanes., • Demonstrated successful execution of engineering tasks including use of mechanical CAD (SolidWorks preferred) and quantitative analysis/programming tools (Python, Matlab), and finite element analysis tools (ANSYS Workbench or similar). Startup Mindset: • You're creative, flexible, and eager to wear multiple hats., • You're passionate about building systems from the ground up and comfortable with ambiguity and change. Benefits The expected annual salary range for this position is $125,000-$175,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description Alarm.com (ADC) is a rapidly expanding technology company developing innovative cloud and device solutions that deliver a unified, connected service to millions of residential and commercial properties in the US and abroad. We are seeking a hands-on Senior Device Engineer - Mechanical to join our hardware team in San Diego and help define the future of connected-home devices, including video doorbells, cameras, sensors, and control modules. As the Senior Device Engineer - Mechanical in our San Diego office, you will independently own the mechanical design of new products from concept through manufacturing. You will serve as the on-site mechanical point of contact for our local Technical Program Managers, Electrical Engineers, Firmware Engineers, and Acoustics Engineer, while coordinating closely with our mechanical engineering team across our Taiwan, Washington DC, and Florida offices and our manufacturing partners in Asia. This role operates in the fast-paced, high-cadence development environment that defines consumer electronics. Key Responsibilities: • Own product development end-to-end: Independently drive mechanical design of consumer electronics products from concept and industrial-design intent through detailed design, prototyping, and mass production., • Lead large-assembly design: Architect and manage complex, multi-part 3D CAD assemblies, maintaining design intent, robust part relationships, and revision discipline across the full product., • Build mockups and prototypes: Create mockups and functional prototypes to evaluate concepts, validate fit and function, and accelerate design iteration., • Manage simulation and analysis: Plan and manage simulations and engineering analysis, assess risks and design options, and justify decisions against product and cross-functional requirements., • Drive industrial-design integration: Manage ID discussions to balance and accommodate optical, acoustic, RF, usability, reliability, and operational-efficiency requirements across the full range of intended environmental conditions., • Design for manufacturing across processes: Design and optimize parts for injection molding, die-cast metal, over-molding, silicone (LSR) injection molding, compression molding, double-shot/two-shot molding, CNC machining, sheet metal, die-cut, and stamped processes., • Drive tolerance and DFX resolution: Perform tolerance stack-up analysis and lead resolution of DFM/DFA/DFX feedback to ensure manufacturable, reliable, cost-effective designs., • Prepare manufacturing drawings: Produce detailed 2D drawings for manufacturing that capture critical dimensions, tolerances (GD&T), manufacturing methods, materials, finishes, colors, and all requirements necessary to produce quality products., • Prepare BOMs, RFQs, and documentation: Prepare preliminary and detailed BOMs and RFQ packages, and document decisions, meeting minutes, research conducted, analyses and simulations performed, engineering assumptions and calculations, and risks with mitigation options., • Engage vendors and partners: Work directly with tooling vendors and ODM/manufacturing partners across Asia to drive part quality, tool builds, and issue resolution through EVT, DVT, and PVT., • Serve as the cross-site and cross-functional liaison: Act as the on-site mechanical point of contact for San Diego-based TPMs, EEs, FW, and Acoustics, and coordinate mechanical execution with the distributed ME team in Taiwan, DC, and Florida — ensuring the complete system meets product requirements and is validated and verified according to established engineering standards and methods.Required Qualifications:, • Bachelor's degree or above in Mechanical Engineering or a related field., • 5+ years of mechanical design experience, with significant experience in consumer electronics, and a demonstrated ability to take products from concept to manufacturing independently., • Proficient 3D CAD skills with strong large-assembly management experience (Creo strongly preferred)., • Thorough working knowledge of designing parts for injection molding, die-cast metal, over-molding, silicone injection molding, compression molding, double-shot molding, CNC, sheet metal, die-cut, and stamped processes., • Proven experience with tolerance stack-up analysis, GD&T, and resolving DFM/DFA/DFX feedback., • Experience producing manufacturing-ready 2D drawings, BOMs, and RFQ packages, and maintaining clear engineering documentation., • Demonstrated experience working with vendors and manufacturers in Asia and collaborating with cross-functional, globally distributed teams (ID, Optics, Acoustics, EE, RF, FW, QE)., • Self-motivated with the ability to own product development autonomously and coordinate effectively across remote sites and time zones., • Strong written and verbal communication skills in English.Preferred Qualifications:, • Direct experience developing cameras and/or video doorbells or similar connected-home consumer devices., • Experience working in fast-paced consumer electronics development cycles., • Experience coordinating mechanical work across multiple global sites and external manufacturing partners. Please note that sponsorship of new applicants for employment authorization, or any other immigration-related support, is not available for this position at this time. WHY WORK FOR ALARM.COM? • Collaborate with outstanding people: We hire only the best. Our standards are high and our employees enjoy working alongside other high achievers., • Make an immediate impact: New employees can expect to be given real responsibility for bringing new technologies to the marketplace. You are empowered to perform as soon as you join the Alarm.com team!, • Gain well rounded experience: Alarm.com offers a diverse and dynamic environment where you will get the chance to work directly with executives and develop expertise across multiple areas of the business., • Community and Camaraderie: One of our core values is to 'Keep It Fun,' which to us means fostering a strong sense of community. Our culture is built on collaboration and connection, where we celebrate our successes and believe that a positive, engaging environment is key to doing our best work., • Alarm.com values working together and collaborating in person. Our employees work from the office 4 days a week. COMPANY INFO Alarm.com is the leading platform for intelligently connected properties. Millions of homeowners and businesses rely on Alarm.com's technology to secure, monitor, and manage their environments from anywhere. Our comprehensive suite of solutions—including security, video surveillance, access control, active shooter detection, intelligent automation, energy management, and wellness—is delivered exclusively through a trusted network of thousands of professional service providers and commercial integrators across North America and worldwide. Alarm.com's common stock is traded on Nasdaq under the ticker symbol ALRM. Alarm.com delivers serious security for serious people. For more information, please visit www.alarm.com. COMPANY BENEFITS Our total rewards package is designed to support you holistically—in your health, your finances, and your life outside of work. The package includes medical plans with company subsidies, a Health Savings Account (HSA) with a company contribution, and a 401(k) with an employer match. We encourage a healthy work-life balance with paid vacation that increases with tenure, paid holidays, wellness time, and paid maternity and bonding leave. To complete the package, we also provide company-paid disability and life insurance, all within a collaborative and casual work environment. Alarm.com is an Equal Opportunity Employer In connection with your application, we collect information that identifies, reasonably relates to or describes you ("Personal Information"). The categories of Personal Information that we may collect include your name, government-issued identification number(s), email address, mailing address, other contact information, emergency contact information, employment history, educational history, criminal record, and demographic information. We collect and use those categories of Personal Information about you for human resources and other business management purposes, including identifying and evaluating you as a candidate for potential or future employment or future positions, recordkeeping in relation to recruiting and hiring, conducting criminal background checks as permitted by law, conducting analytics, and ensuring compliance with applicable legal requirements and Company policies. By submitting your application, you acknowledge that we may retain some of the personal data that you provide in your application for our internal operations such as managing our recruitment system and ensuring that we comply with labor laws and regulations even after we have made our employment decision. Notice To Third Party Agencies: Alarm.com understands the value of professional recruiting services. However, we are not accepting resumes from recruiters or employment agencies for this position. In the event we receive a resume or candidate referral for this position from a third-party recruiter or agency without a previously signed agreement, we reserve the right to pursue and hire those candidate(s) without any financial obligation to you. If you are interested in working with Alarm.com, please email your company information and standard agreement to RecruitingPartnerships@Alarm.com. The base salary range of this opportunity is listed below and is determined within a range based on factors including qualifications, location and experience. This allows opportunity for growth and development within the role. The base salary offered is part of a total compensation package. Base Salary Range$145,000—$155,000 USD

Job DescriptionDescription: Work Local in South San Diego – Skip the Commute Stop spending your life on the I-5 and I-805. AP Precision Metals is seeking dependable Powder Coat Operators who live in Chula Vista, Eastlake, Otay Mesa, or nearby South County communities and want a stable manufacturing career close to home. Whether you're an experienced powder coater or have manufacturing experience and are eager to learn, this is an opportunity to join a growing company with modern equipment, long-term customers, and opportunities for advancement. About AP Precision Metals, Inc. AP Precision Metals, Inc. is San Diego's leading commercial metal fabricator, specializing in simple to complex assemblies for many of Southern California's largest OEMs. Founded in 1999, AP Precision has grown consistently for over 25 years through investment in advanced manufacturing equipment, operational stability, and employee development. Our 40,000 sq. ft. South San Diego facility includes state-of-the-art laser cutting, CNC forming, welding, powder coating, machining, hardware insertion, assembly, and shipping operations serving commercial, transportation, architectural, and defense-related industries. Position Summary We are seeking a dependable and detail-oriented Powder Coat Operator to support our powder coating department. This position is responsible for preparing, coating, curing, inspecting, and handling metal parts while maintaining high standards of quality, safety, and productivity. Successful candidates take pride in producing high-quality finishes, maintaining an organized work area, and working efficiently as part of a manufacturing team. Job DescriptionPowder Coating Operations • Hang, mask, prepare, and powder coat metal parts according to work instructions and customer specifications., • Operate powder coating equipment, spray guns, curing ovens, and related finishing equipment., • Verify proper coating coverage, finish quality, and cure requirements., • Remove, inspect, and package finished parts for the next production operation., • Maintain clean racks, hooks, and powder coating equipment. Material Handling, • Move parts, racks, and materials throughout the powder coating department., • Stage production jobs according to production schedules., • Assist with loading and unloading curing racks and production fixtures., • Maintain organized work areas and material flow. Quality & Safety, • Perform visual inspections to ensure coating quality meets customer and company standards., • Report coating defects, equipment issues, or production concerns to supervisors., • Follow work instructions, quality standards, and production schedules., • Maintain clean work areas in accordance with company housekeeping and 5S standards., • Follow all safety procedures and properly use required personal protective equipment (PPE). Team Support, • Assist other production departments as workload requires., • Participate in cross-training opportunities., • Support continuous improvement initiatives., • Work collaboratively with supervisors and fellow production employees. Compensation & GrowthCompensation $19.00 – $24 per hour, depending on experience and qualifications. Career Growth AP Precision Metals believes in promoting from within. Successful employees have opportunities to advance into positions including: • Powder Coat Lead, • Production Lead, • Quality Inspector, • Shipping & Logistics, • Manufacturing Supervisor We provide on-the-job training and encourage employees to develop new manufacturing skills throughout their careers. Work Environment • Full-time, in-person position at our South San Diego (Otay Mesa) manufacturing facility., • Fast-paced production environment with modern powder coating equipment and manufacturing technology., • Regular interaction with fabrication, welding, assembly, shipping, and quality departments. Work Schedule, • Full-time position, • 1st Shift: Monday–Friday, 6:30 AM – 3:00 PM, • Overtime available based on production requirements. Benefits, • Competitive compensation package, • Health, dental, and vision insurance, • IRA retirement plan, • Paid time off and company holidays, • Stable, year-round employment with a growing manufacturing company, • On-the-job training and opportunities for career advancementRequirements: Experience & Skills • Previous powder coating, painting, manufacturing, or industrial finishing experience is preferred but not required., • Experience in sheet metal fabrication or manufacturing is a plus., • Ability to safely operate hand tools and manufacturing equipment., • Mechanical aptitude and the ability to follow written and verbal work instructions., • Forklift experience is a plus but not required. Personal Qualifications, • Reliable, punctual, and dependable., • Strong attention to detail and commitment to producing quality work., • Positive attitude and willingness to learn., • Ability to work independently and as part of a team., • Ability to maintain productivity in a fast-paced manufacturing environment. Physical Requirements, • Ability to safely perform the essential functions of the position, with or without reasonable accommodation., • Ability to regularly lift, carry, and move materials weighing up to 25 pounds, and occasionally up to 50 pounds with assistance or appropriate lifting equipment., • Ability to stand, walk, bend, reach, and move throughout the manufacturing facility for extended periods during scheduled shifts., • Ability to perform repetitive production tasks including hanging, masking, powder coating, unloading, and inspection of metal parts., • Ability to safely wear required personal protective equipment (PPE), including gloves, eye protection, hearing protection, protective clothing, and respirators where required., • Ability to safely work around industrial powder coating equipment, curing ovens, forklifts, and moving production materials., • Ability to work in a typical manufacturing environment with varying temperatures, industrial noise, dust, and exposure to finishing materials.

Job Description Join our fast-paced and passionate team as a Mechanical Engineer 2. As we scale, you will be instrumental in building our foundation from the ground up. This is a dynamic, hands-on role for a self-starter who thrives in a fluid startup environment. You'll have the opportunity to work on cutting edge technologies, work closely with leadership, and develop and implement engineering practices that support our mission and growth. Your key responsibilities are as follows: • Work independently and in a team while over communicating with the manager and the teammates. May mentor junior engineers., • Execute complex engineering tasks involving planning, preparation, data/information collection and analysis and decision-making in a process involving peer reviews and documentation of the results., • Use tenacity, patience, self-discipline and passion for excellence to assure accuracy of execution schedule, data quality/integrity, conformance to company best practices, clarity in communication and documentation., • Use every opportunity to grow competency thru mentorship, curiosity, communication, exposure and initiative. Requirements • This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Experience: • A bachelor’s degree in mechanical engineering, Physics, or a related field and a minimum of 2 years of relevant experience, ideally within a startup or technology company. Skills: • Working knowledge of at least one ME topic and basic understanding of standard mechanical engineering degree curriculum., • Solid understanding of material properties, mechanisms, fabrication methods: CNC milling, CNC turning, sheet metal, injection molding, laser cutting, water jet cutting, and 3D printing (metal and plastic)., • Solid understanding of structural theory: static, modal, random vibration, shock, etc., • Solid understanding of fluids and heat transfer theory: conduction, convection and radiation., • Demonstrated successful execution of engineering tasks including use of mechanical CAD (SolidWorks preferred) and quantitative analysis/programming tools, instrumentation and measurement, part fabrication or procurement, integration and test, data collection, analysis (ANSYS Workbench) and documentation. Benefits The expected annual salary range for this position is $85,000-$125,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job DescriptionMECHANICAL ENGINEER (4+ yrs) BASILE Studio is looking for a creative and committed engineer with a passion for custom details, holistic design and thrives in a fast-paced environment. Essential Duties & Responsibilities Success in this position is dependent on not only being a creative problem solver, but having strong communication skills, excellent follow-through, being detail-oriented, and most importantly having the desire of joining a team that is fast-moving, adaptive to change, comfortable with implementing processes, and likes to get things done. We are seeking team members that will bring their UNIQUE skill set. That is highly versatile, capable of switching gears, and producing informative easy to read drawings in a short amount of time. Each engineer is required to lead a project from beginning to end through all phases of development into final install. You will be responsible for production and project management of individual custom items. Included but not limited to: Convert Sketchup/AutoCAD design concepts into manufacturing blueprints using SolidWorks. Calculate static and dynamic loads. Create 3D Models and shop drawings (broken down into logical sub-assemblies), Bill of Materials, and CNC cut files. Estimate material needs early in design to track anticipated spending. Coordinate with designers, structural engineers, fabricators, purchasing, and outside vendors. Production Planning - Define and calculate project requirements, source materials, components, and hardware. Outline fabrication methods and install plan. Design jigs and templates to aid the fabrication process. Project Management - Redline shop drawings and help troubleshoot issues during fabrication/installation. Ability to manage multiple projects at the same time. Every team member is required to support others, whether its scheduled help or stepping in when they need it. Clear communication and ability to prioritize are crucial to keep the team going. We all must operate with a sense of urgency while still delivery a high-quality product. We are all required to wear multiple hats, not just for the engineering team but for the company as whole and contribute to our overall culture. Qualification Requirements Bachelor’s Degree in Manufacturing/Mechanical Engineering or similar required. 4+ years Mechanical Design Experience (SolidWorks) in a professional setting required. Sheet metal and weldment design experience preferred. Knowledge of various fabrication methods, processes, and materials. Basic knowledge of electrical design, controls, and programming. Familiar with building codes and able to read architectural drawings. Effective and clear communications, both verbal and written. Ability to handle sensitive information with diplomacy. Seek out opportunities to do more than expected. Ability to multitask and prioritize workload. Ability to learn new technology. Fast learner, self-starter, and ability to complete tasks with minimal direction. You are collaborative and enjoy working as part of a small team. Animal lovers preferred. Software Proficiency in SolidWorks, Sketch Up, AutoCAD required. Proficiency in Revit, V-Carve (nesting software), and an ERP system (material and project management software) preferred. Additional Details This is a full-time position. Annual Salary Based on Experience. This position will be based out of our office located in Downtown San Diego. Salary $70-95K. We are a unique DESIGN and BUILD studio that is fully vertical in its integration of a multitude of different craftsmanship capabilities, ranging from hotels, restaurants, multi-family developments, custom homes to products. We create unique spaces for individuals to experience beauty and harmony. We are looking for a rockstar who is experienced in managing multi-faceted projects especially Custom Residential, Custom Restaurants and Infill Mixed Use. BASILE studio is responsible for designing some of the most beautiful and award-winning landmarks in town. We want to build a portfolio of our projects that are mind blowing and revolutionary and we want you to be part of it.

Job Description Position Overview Role: Mechanical Design Engineer We’re looking for a creative and committed Mechanical Design Engineer who is passionate about custom details, thrives in problem-solving, and enjoys working on unique, multi-faceted projects from concept through installation. You’ll collaborate closely with designers, engineers, fabricators, and project managers to transform concepts into fully engineered, buildable solutions while balancing design intent, fabrication efficiency, and client expectations. Essential Duties and Responsibilities: Leadership & Project Ownership • Lead projects from concept to final installation, managing all engineering phases., • Take full ownership of design intent, technical execution, and project deliverables., • Balance speed, quality, and adaptability while working in a high-change, high-urgency environment. Design & Engineering • Convert SketchUp/AutoCAD design concepts into manufacturing-ready shop drawings using SolidWorks., • Develop 3D models, sub-assembly breakdowns, bills of materials, and CNC cut files., • Calculate static and dynamic loads to ensure structural integrity., • Design jigs, templates, and fixtures to streamline fabrication. Project Estimation & Planning • Estimate material and hardware needs early in design to track anticipated costs., • Assist in defining fabrication methods and creating installation plans., • Source materials, components, and specialty hardware for custom builds. Collaboration & Coordination • Work closely with designers, project engineers, fabricators, purchasing, and vendors to ensure alignment on project goals., • Participate in design pass-off reviews to eliminate waste and improve build efficiency., • Support teammates when needed and contribute to a collaborative, team-first culture. Problem-Solving & Quality Assurance • Redline shop drawings and troubleshoot issues during fabrication and installation., • Proactively identify roadblocks, delays, and design conflicts and communicate solutions early., • Maintain a strong sense of urgency while delivering high-quality, precision-driven work. Qualifications Required • Associate’s Degree in Manufacturing, Mechanical Engineering, or equivalent experience., • 4+ years of mechanical design experience using SolidWorks., • Knowledge of fabrication methods, processes, and materials., • Ability to read and interpret architectural drawings., • Strong verbal and written communication skills., • Excellent problem-solving abilities and attention to detail., • Self-starter with the ability to manage multiple projects simultaneously. Preferred • Experience with sheet metal and weldment design., • Familiarity with basic electrical design, controls, and programming., • Working knowledge of building codes and permitting requirements., • Experience in custom fabrication, specialty installations, and multi-disciplinary projects. Software Proficiency • Required: SolidWorks, nesting software, ERP/project management systems., • Preferred: Revit, SketchUp, AutoCAD. Additional Details • Position Type: Full-time, on-site., • Location: Downtown San Diego., • Salary Range: $70,304 – $95,000 annually, based on experience., • Culture: Collaborative, fast-paced, and hands-on., • Bonus points if you’re an animal lover — we’re a pet-friendly studio!Company DescriptionBasile Studio is a company who cares. We care about our people, our work, our mission to "design cool sht", and providing an excellent quality of service to our clients.Basile Studio is a company who cares. We care about our people, our work, our mission to "design cool sht", and providing an excellent quality of service to our clients.

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Do you thrive in innovative, design-driven environments with a high level of both accountability and trust? Are you passionate about delivering elegant hardware solutions with the right amount of design rigor? Are you seeking a technical role where you can take initiative? If so - we want to hear from you! Fuse is looking for a mid-level Mechanical Designer to join our team onsite in San Diego, CA. We’re looking for a mechanical designer that can balance discipline and attention to detail with outside-the-box thinking and an innovative problem-solving attitude. Must be a pragmatic and mission-driven self-starter. Apply your analytical and detail-oriented mindset to develop, own, and improve Fuse’s products for U.S. defense agencies that improve the sharing of information among warfighters distributed throughout airborne, maritime, and ground environments. Through a collaborative effort with the Electrical, Systems, and Production teams, this role will support Fuse Engineering to build communications, networking, and computing solutions for the warfighter. This is a mid-level role with great potential for growth. Warfighter-focused design and development is at the heart of Fuse processes. Throughout Fuse development our experienced team applies the best practices of commercial design-thinking, coupled to the DoD systems engineering framework. The coupling of commercially proven design with rigorous systems engineering gives Fuse an ability to rapidly design, develop and field solutions well inside of typical military design cycles. Fuse rapidly innovates, putting creative concepts into action and refining those concepts through hands-on testing, user evaluation, and iterations. What you’ll do: • Implement mechanical systems, equipment, and packages for customer and internal programs that meet requirements and expectations, • Support, design, and develop dynamic tactical communications systems, • Mechanical design and development for sustaining engineering of our flagship and existing products including dynamic tactical communications systems, • Perform trade studies and participate in equipment selection, • Generate, review, and maintain mechanical drawings, bills of materials (BOMs), work instructions, and releasing of mechanical prints, • Interact with vendors to quote and produce mechanical parts and assemblies, • Participate in engineering/design reviews, • Conduct feasibility studies and testing on new and modified designs, • Support prototype and first article hardware builds, • Support integration between hardware, software, and network systems, • Conduct and support test planning, execution, and post-event reporting, • Interpret and research system interface documents in support of designing/defining/documenting how systems will interconnect, • Translate customer requirements into subsystem and system specifications, • Provide on-site and distance operational support, • Limited Travel may be required Requirements We are looking for: • 4+ years of Mechanical Design experience, • Familiarity with Engineering Drawing Practices Y14.100 and Geometric Dimensioning and Tolerancing Y14.5, • Expert level of capability with Solidworks software including experience with eDrawings and Model Based Definition (MBD) of products and assemblies Y14.41, • Experience with fabrication methods for sheet metal and machined parts with part finishing (powder coat, anodize, Alodine, and plating), • Understanding of additive manufacturing processes, • Understanding of cable routing and its application in enclosures, • Must be a nimble self-starter who is excited about technology and can think out of the box and suggest powerful new ideas, • Experience working with production personnel and creating assembly instructions, • Strong technical, interpersonal, written and verbal skills, • Ability to operate effectively in a team environment as well as independently, • Demonstrate ownership and accountability of product designs, • Ability to obtain US SECRET Clearance, • US Citizen Your own unique talents! If you meet some requirements of this position but not 100% of the qualifications outlined above, tell us why you’d be a great fit for this role based on your specific characteristics that align with our values and goals Nice to have: • Experience with commercial and military documentation, • Experience in design for TEMPEST, EMI MIL-STD-461, MIL-STD-810 (Environmental), MIL-HDBK-516 (Air Worthiness), ARINC 404, and/or ARINC 600 requirements, • Basic Electrical Engineering knowledge including manufacturing processes for Circuit Card Assemblies and grounding strategies, • Basic understanding of Configuration Management practices with experience with Solidworks PDM, • Experience in Solidworks Electrical, including cable routing., • Experience in system design, testing, and analysis, • Experience in agile, professional software development environments utilizing revision control, test driven development and continuous integration, • Active Secret Clearance More about Fuse: Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Salary Range: $75,000 - $105,000 Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job Description Join our fast-paced and passionate team as a Opto-Mechanical Engineer 2. As we scale, you will be instrumental in building our foundation from the ground up. This is a dynamic, hands-on role for a self-starter who thrives in a fluid startup environment. You'll have the opportunity to work on cutting edge technologies, work closely with leadership, and develop and implement engineering practices that support our mission and growth. Your key responsibilities are as follows: Design & Engineering • Photonic Component & Assembly Design: Design precision mechanical components and sub-assemblies for photonic systems, including optical isolators, fiber optic connectors, and micro-optic/crystal mounting solutions., • Precision Optomechanical Fixturing: Design and build custom assembly tooling, alignment jigs, and fabrication stations to support low-volume prototyping and high-volume production., • Tolerance & Thermal Analysis: Perform basic tolerance stack-up analysis and thermal/stress evaluations (FEA) to ensure optical alignment is maintained across operating temperatures and mechanical strain. Production, Documentation & Material Tracking • Fabrication Drawings & Drafting: Create, release, and maintain detailed 2D fabrication drawings adhering to GD&T standards (ASME Y14.5) for CNC machining, precision molding, and sheet metal., • BOM & Material Tracking: Build and maintain Bills of Materials (BOMs), track engineering prototypes through procurement and fabrication, and manage component inventory for build cycles., • Engineering Change Management: Process Engineering Change Orders (ECOs) and update CAD models and documentation based on design reviews, supplier feedback, or assembly findings. Prototype Testing & Lab Work • Hands-On Assembly & Integration: Support cleanroom or lab-level assembly and alignment of delicate optical and mechanical sub-assemblies using adhesive bonding (UV/epoxy), soldering, or precision mechanical fasteners., • Root Cause Analysis & Failure Mode Testing: Assist senior engineers in investigating design or manufacturing non-conformances, running root cause analysis (RCA), and implementing corrective actions. Requirements • This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Experience: • A bachelor’s degree in mechanical engineering, Physics, or a related field., • A minimum of 2 years of relevant experience, ideally within a startup or technology company. Skills: • CAD Expertise: Proficient in 3D CAD modeling and drawing generation (SolidWorks preferred) with demonstrated experience using GD&T (ASME Y14.5)., • Optomechanical Design Basics: Familiarity with optomechanical mounting techniques (kinematic mounts, flexures, adhesive bonding of optics/crystals, glass-to-metal joints)., • Fiber Optics & Micro-Packaging: Exposure to fiber handling, fiber alignment mechanisms, or micro-electronic/photonic packaging considerations., • DFM / DFA Awareness: Solid understanding of Design for Manufacturability (DFM) and Design for Assembly (DFA) across precision CNC machining, sheet metal, and small-scale assembly., • Hands-On Aptitude: Comfortable working in an optical cleanroom/lab environment using hand tools, torque drivers, and optical alignment or measurement equipment. Benefits The expected annual salary range for this position is $85,000-$125,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description Summary: A commercial mechanical contractor is seeking an experienced Estimator to support HVAC retrofit, piping, and sheet metal projects. This role is responsible for leading the estimating process from initial job walk through final proposal submission. The ideal candidate has deep mechanical knowledge, strong communication skills, and experience supporting preconstruction and design-build efforts. Key Responsibilities: Support the sales and preconstruction teams with technical expertise during early project stages Conduct job walks, develop scope, and support design-build project planning Prepare detailed estimates including material takeoffs, labor hours, and preliminary schedules Write proposals, budgets, and scopes of work for HVAC retrofits and mechanical construction projects Review drawings, specifications, and sketches to ensure accuracy and completeness Coordinate with account managers, end users, engineering teams, and vendors to collect project information Prepare proposal packages including scope, cost, schedule, clarifications, and exclusions Ensure compliance with mechanical codes and regulatory requirements Support constructability reviews and identify value-engineering opportunities Obtain subcontractor and supplier pricing; assist with pricing change orders Submit professional, accurate, and timely estimate packages Qualifications: 4+ years of experience in HVAC or mechanical estimating Strong understanding of mechanical retrofits in commercial buildings Experience working on hospitals, data centers, K-12, and higher education projects Familiarity with energy-related work (DDC, commissioning, energy analysis) Strong mechanical knowledge including piping, sheet metal, and equipment Proficient with Microsoft Office tools Strong written and verbal communication skills Ability to manage multiple deadlines with high attention to detail Self-motivated, organized, and team-focused Compensation + Benefits: Competitive salary based on experience Medical, dental, and vision coverage 401(k) with company match Paid vacation, holidays, and sick time Professional development and long-term growth opportunities

Job DescriptionDescription: AP Precision Metals, Inc. is San Diego's leading commercial sheet and plate metal fabricator. We are a valuable and long-term supplier to some of San Diego's biggest OEMs, providing a wide range of sheet metal components, weldments, and other metal assemblies. Our entire operation is located at our 40,000 sq. ft. factory located 10 minutes north of the Tijuana/San Diego border and a 5 minute walk from the Iris Trolley station. The company was founded in 1999 by Lane Litke and Victor Miller, and thanks to reliable and honest leadership and the hard work of our entire team, AP Precision has grown an average of 20% per year for the last 25 years. Over the last two decades, we have invested millions of dollars in cutting-edge manufacturing machines and made equally significant investments in employee training and advancement. Many of our employees have been with us for 5, 10, and even 15 years. A generous IRA program, healthcare, shift differentials for 2nd shift, and a focus on regular training have allowed us to take many employees from unskilled labor to high-paid technicians. We take pride in the customers we serve and just as much pride in the health and success of our team and their families. The following pages contain job descriptions for key positions at AP Precision Metals. Each description includes purpose, responsibilities, qualifications, and pay ranges. General requirements across all positions include: • Ability to work safely in a manufacturing environment, • Strong commitment to quality and ISO9001 compliance, • Ability to stand for extended periods and lift up to 25-50 pounds as needed, • Reliability, punctuality, and teamwork, • Adherence to company policies, safety standards, and 5S/housekeeping practices Job Description – Quality Technician Job Title: Quality Technician Department: Quality Assurance Reports To: Quality Manager Location: South San Diego (Otay Mesa Area) Job Type: Full-time Pay Rate: $22-$26 per hour Purpose The Quality Technician is responsible for inspecting sheet metal parts and assemblies to verify compliance with technical drawings, industry standards, and customer specifications. This role supports the quality assurance program by conducting inspections, documenting results, identifying nonconformances, and assisting in corrective actions. The Quality Technician ensures AP Precision Metals’ commitment to product quality, ISO9001 standards, and continuous improvement. Requirements: Primary Duties • Conduct detailed inspections of sheet metal components and assemblies using precision measuring tools., • Read and interpret blueprints, technical specifications, and quality standards to verify part compliance., • Identify quality issues, document findings, and collaborate with production staff on corrective actions., • Perform routine audits of manufacturing processes and work instructions to ensure adherence to ISO9001 procedures., • Train and mentor entry-level inspectors and production personnel in quality control practices., • Generate and maintain inspection records, reports, and test results in compliance with ISO9001 documentation requirements., • Participate in continuous improvement initiatives to enhance product quality and process efficiency., • Support calibration and care of quality inspection tools and equipment. Additional Duties (as required) • Assist production teams with root cause analysis and corrective/preventive actions., • Provide feedback to engineering on design or specification issues affecting quality., • Support internal and external audits as required. Qualifications • Associate’s degree in a related field, or equivalent work experience., • 3–5 years of experience in sheet metal inspection or a comparable manufacturing environment., • Strong knowledge of sheet metal fabrication processes and quality control standards., • Proficient in the use of precision measuring tools (calipers, micrometers, height gauges, etc.)., • Excellent communication, documentation, and problem-solving skills., • Ability to work independently and collaboratively in a fast-paced production environment., • Familiarity with ISO9001 requirements preferred. Physical Requirements • Ability to lift up to 25 pounds., • Ability to stand for extended periods while performing inspections., • Comfortable working in a manufacturing environment with exposure to noise, machinery, and sheet metal handling. Work Schedule • Hiring for 1st shift (6:30 AM – 3:00 PM), with flexibility for overtime as required. Benefits • Competitive pay., • Health, dental, and vision insurance., • Paid time off and company holidays., • Professional development and advancement opportunities

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: As a Systems Integration Engineer, you will independently own the design, installation, and integration of aircraft systems and components while supporting the development of complete subsystem installations. You will collaborate across engineering disciplines to deliver manufacturable, maintainable, and reliable aircraft hardware. The ideal candidate has demonstrated experience designing aircraft hardware and installation solutions and enjoys solving multidisciplinary integration challenges involving structures, avionics, propulsion, manufacturing, and production. What you'll do: • Independently design machined, fabricated, composite, and sheet metal components for aircraft applications., • Develop aircraft installation layouts that optimize packaging, accessibility, serviceability, manufacturability, and weight., • Design routing paths for EWIS, hydraulic, fuel, pneumatic, and ECS systems while coordinating interfaces with adjacent aircraft structures and subsystems., • Develop detailed engineering drawings, installation drawings, and assembly documentation in accordance with company drafting standards., • Maintain CAD assemblies, product structures, BOMs, and engineering releases within PLM systems., • Apply GD&T and tolerance stack-up analyses to ensure manufacturable and interchangeable designs., • Support prototype aircraft builds, production integration, and manufacturing issue resolution., • Investigate installation and integration issues through structured root cause analysis and implement corrective actions., • Collaborate with cross-functional teams to integrate avionics and other system components seamlessly within the aircraft, • Perform engineering calculations to support design decisions and evaluate structural adequacy.Required qualifications:, • Bachelor's or Master's degree in Mechanical Engineering or related discipline., • 3+ years of professional experience designing and integrating mechanical systems for aircraft, aerospace, defense, robotics, automotive, or other complex electromechanical products., • Demonstrated experience designing machined, fabricated, composite, and sheet metal components from concept through production release., • Proficiency developing complex 3D CAD models, large assemblies, installation layouts, and detailed engineering drawings using NX, SolidWorks, CATIA, Creo, or equivalent CAD software., • Experience managing engineering data, product structures, Bills of Material (BOMs), and drawing releases using PLM systems such as Teamcenter, Windchill, or 3DEXPERIENCE., • Working knowledge of aircraft installation practices, subsystem packaging, interface management, equipment mounting, and maintainability considerations., • Experience developing installation layouts and routing solutions for EWIS, hydraulic, fuel, pneumatic, ECS, or similar mechanical systems., • Working knowledge of GD&T in accordance with ASME Y14.5 and experience performing tolerance stack-up analyses., • Experience supporting prototype builds, manufacturing, aircraft assembly, installation, and production issue resolution., • Ability to investigate integration issues, perform root cause analysis, and implement effective corrective actions., • Experience collaborating with Manufacturing, Systems Engineering, Stress, Avionics, Supply Chain, Quality, and Test Engineering organizations throughout the product development lifecycle., • Strong organizational, communication, and project management skills with the ability to manage multiple assignments simultaneously., • Ability to obtain a S//SAR level security clearance desired.Preferred qualifications:, • Experience integrating aircraft subsystems on unmanned aircrafts, fixed wing, eVTOL, or other aerospace platforms., • Experience leading mechanical work packages or owning subsystem-level hardware from concept through production., • Experience performing structural hand calculations, free-body diagrams, load path evaluations, or preliminary stress analyses to support mechanical design decisions., • Experience performing finite element analysis (FEA), including static, modal, vibration, fatigue, or thermal analyses., • Hands-on experience supporting build, production, testing, or hardware validation activities., • Familiarity with aircraft configuration management, engineering change processes, and formal product release workflows., • Experience coordinating engineering activities with suppliers, manufacturing partners, or external engineering organizations., • Familiarity with FAA, DoD, MIL-STD, or commercial aerospace design standards., • Experience mentoring interns or early-career engineers and reviewing engineering documentation for technical accuracy.#LI-AD6#LB Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Labor One is hiring Journey-Level Sheetmetal Fitters for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Please send us a text if we don't answer Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, sheet metal repairs and installation on maritime vessels such as Navy Ships, Military Sealift Command ships, and commercial vessels. Repairs and installation include shipboard and shop tasks required to plan, layout, fabrication, and assemble various sheetmetal structures throughout the ship. The position requires a comprehensive understanding of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must possess the ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the structural supervisor, improvers, and helpers., 6. Must be able to read and interpret structural drawings, sketches, and specifications., 7. Must be able to interpret appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Must have experience repairing and installing shipboard habitability spaces including: berthing equipment; galley equipment; ventilation ducting (heating and cooling); and joiner doors in accordance with drawings, specifications, and sketches., 9. Must understand the principle of balancing air systems including taking proper readings and documenting the results., 10. Must have experience using hand and power tools and understand the operation of fabricating machines such as shears, brakes, presses, forming rolls and routers., 11. Must have experience tack welding using SMAW or GMAW., 12. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 13. Six (6) years of related experience, three (3) of which were in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. 3. Work shifts and overtime as assigned., 3. Keeping the work area clean and safe at all times, especially at the end of the shift., 4. Complete daily work assignments and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 7. Carry out written and verbal instructions., 8. Resolve unexpected events related to your assigned task in a professional manner., 9. Work Tasks Include: a. Prepare the work area to a safe work environment, paying particular attention to the added requirements if hot work is required. b. Accomplish operational tests on equipment that will be reinstalled and document results. c. Conduct a preproduction inspection of the work site and submit the As-found condition report. d. Measure, lay out, and mark structures to be removed using drawings, specifications, shop sketches, or direction from the structural supervisor. e. Remove existing structures, furniture, and ventilation ducting as required by the drawings or specifications, or as directed by the supervisor. f. Construct templates and fabricate replacement pieces. g. Trim, file, grind, deburr, and buff surfaces with hand tools and power tools. h. Weld, solder, bolt, rivet, screw, clip, caulk or otherwise bond components. i. Install berthing equipment; galley equipment; ventilation ducting (heating and cooling); and joiner doors in accordance with drawings, specifications, and sketches. j. Direct and monitor the activities of assigned helpers or improvers. k. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. l. Accomplish Lock-out Tag-out for work being performed. m. Clean the work site at the end of the shift. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hrs per week/ OT available per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Join our fast-paced and passionate team as a Senior Mechanical Engineer of Optical Alignment Machines. As we scale, you will be instrumental in building our foundation from the ground up. This is a dynamic, hands-on role for a self-starter who thrives in a fluid startup environment. You'll have the opportunity to work on cutting edge technologies, work closely with leadership, and develop and implement engineering practices that support our mission and growth. Your key responsibilities are as follows: • Work independently and in a team while over communicating with the manager, project engineer and the teammates. Will mentor junior engineers., • Execute complex engineering tasks involving planning, preparation, data/information collection and analysis and decision-making in a process involving peer reviews and documentation of the results., • Use tenacity, patience, self-discipline and passion for excellence to assure accuracy of execution schedule, data quality/integrity, conformance to company best practices, clarity in communication and documentation., • Use every opportunity to grow competency thru mentorship, curiosity, communication, exposure and initiative. Requirements • This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Experience: • A bachelor’s degree in mechanical engineering, Physics, or a related field., • Minimum of 5 years of relevant experience, ideally within a startup or technology company., • Experience with precision automation designs and/or robotics is a plus. Skills: • Deep working knowledge of multiple ME topics and strong understanding of standard mechanical engineering degree curriculum., • Deep understanding of material properties, mechanisms, fabrication methods: CNC milling, CNC turning, sheet metal, injection molding, laser cutting, water jet cutting, and 3D printing (metal and plastic)., • Creative design engineer who is accustomed to working with large complex assemblies., • Ability to process requirements and convert it into simple solutions., • Experience with motor selection is a plus., • Good understanding of precision linear stages and linear rails., • Deep understanding of structural theory: static, modal, random vibration, shock, etc., • Deep understanding of fluids and heat transfer theory: conduction, convection and radiation., • Demonstrated successful execution of engineering tasks including use of mechanical CAD (SolidWorks preferred) and quantitative analysis/programming tools (Python), instrumentation and measurement, part fabrication or procurement, integration and test, data collection, analysis (ANSYS Workbench) and documentation. Startup Mindset: • You're creative, flexible, and eager to wear multiple hats., • You're passionate about building systems from the ground up and comfortable with ambiguity and change. Benefits The expected annual salary range for this position is $165,000-$225,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws. #LI-JM1

Job Description The Senior Stress Engineer at AEVEX Aerospace is responsible for analyzing primary & secondary aircraft structures to show compliance with FAA 14CFR Part 23 & Part 25 regulations. These analyses include loads development, classical hand calculations, Finite Element (FEM) modeling, fatigue & damage tolerance assessment and testing of aircraft modifications involving both metallic & composite structure and are thoroughly documented in formal structural substantiation reports. Essential Functions: • Provides stress analysis of metallic & composite structures using classical hand calculations and finite element modeling (FEM) with advanced meshing techniques, • Performs loads develop in support of static, dynamic and fatigue & damage tolerance assessments, • Develops Fatigue & Damage Tolerance (F&DT) reports, • Other functions may include basic thermal analysis, basic aero-elastic flutter, dynamic response, non- linear analysis, pre- and post-test analysis, structural optimization, and software programming, • Completes stress notes & develops macros using Excel and Mathcad or similar software, • Documents analyses in formal structural substantiation reports and other airworthiness documents, • Contributes to FAA STC Project Specific Certification Plans (PSCP), • Interfaces with Design Engineers to determine structural load paths and design optimization, • Reviews & approves engineering drawings & reports • Attends design reviews as necessary, • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies: • Ability to obtain and maintain a Secret Security Clearance (US Citizenship required), • Familiarity with resources such as MMPDS, Bruhn, Roark, etc., aircraft fasteners, materials, sheet metal assemblies, machined fittings, composites (fiberglass/carbon fiber), and honeycomb and solid laminate construction, • Knowledge of and familiarity with 14 CFR Part 23 and Part 25 structures regulations, • Strong foundation in technical skills, such as stress analysis, FEM, and solid modeling., • Solid understanding of engineering modeling techniques and principles, • Experience reviewing and interpreting engineering models, drawings and manuals, • Strong organizational, analytical and problem solving skills, • Ability to evaluate, document, and report information regarding designs based on structural trade studies, • Experience with sheet metal modeling techniques for aircraft structures, • Strong communication skills, both written and verbal., • Proficient in MS Office for report writing and analysis preparation, • Ability to work collaboratively with the engineering team and cross functionally, • Proficient in writing technical reports and presenting data in a clear and concise manner, • Driven self starter with a strong sense of accountability Education / Certifications: • Degree in Aerospace or Mechanical Engineering or equivalent experience required Experience: • 8-10 years of classical aircraft hand stress analysis methods and NASTRAN (FEMAP) finite element modeling, • Experience with primary & secondary structural modifications on aircraft Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Constantly required to sit, and to reach to use computers and other office equipment. For this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. The Company provides a reasonable range of compensation. Actual compensation is influenced by an array of factors including, but not limited to, skill set, level of experience, and specific location. The range of starting pay for this position is for the listed location only. Salary Range$200,000—$224,000 USD About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Do you thrive in innovative, design-driven environments with a high level of both accountability and trust? Are you passionate about delivering elegant hardware and software solutions designed with the operator in mind and the right amount of engineering rigor? If so – we want to hear from you! This role will support the agile development of innovative communications, networking, and computing solutions for U.S. defense agencies that improve the sharing of information among warfighters distributed throughout airborne, maritime, and ground environments. Fuse is looking for a Senior Mechanical Engineer to support development and deployment of our multi-function network controller (CORE®) and Integrated Systems suite of products. Fuse’s integrated solutions provide a complete suite of warfighting capabilities in a modular, open architecture that combines networking, computing, and communications in a single hardware package. This role will be a critical member of a talented team of engineers that demonstrate superb technical competency, delivering mission critical communications systems and ensuring the highest levels of availability, performance, and security. We’re looking for an experienced mechanical engineer that can balance discipline and attention to detail with outside-the-box thinking and an innovative problem-solving attitude. Must be an agile, pragmatic, detail- oriented, and mission-driven self-starter. What you’ll do: • Lead a small team of Mechanical Engineers in the planning, design, analysis, and documentation of complex communications devices and integrated systems., • Implement mechanical systems, equipment, and packages for electronics, • Support the design and develop dynamic tactical communications systems, • Generate and review mechanical drawings, • Run advanced simulations on complex mechanical components and assemblies, • Interact with vendors to quote mechanical parts, • Participate in integrated product teams and engineering/design reviews, • Support team members in the preparation of detail design, design testing, and prototype fabrication, • Support integration between hardware, software, and network systems, • Conduct and support test planning, execution, and post event reporting, • Define electro-mechanical subsystem requirements and specifications, • Conduct research and analysis of system interface documents in order to define, document, and design system connections and architecture, • Manage workflows and task prioritization for junior Mechanical Engineers across multiple projects Requirements We are looking for: • Bachelor’s degree in Mechanical/Aerospace Engineering and 8-12 years of experience, • Thorough knowledge and understanding of Engineering Drawing Practices Y14.100 and Geometric Dimensioning and Tolerancing Y14.5, • Expert level of capability with Solidworks software including experience with eDrawings and Model Based Definition (MBD) of products and assemblies Y14.41, • Experience and in-depth understanding of Configuration Management practices with experience with utilizing Solidworks PDM functionality, • Demonstrated experience involving the design of electro-mechanical systems for military applications, • Advanced skills with Solidworks Simulation analysis (or similar software) to include Structural Static/Fatigue, Thermal (Conduction and Convection) and Computational Flow/Fluid Dynamics (CFD), • Experience with fabrication methods for sheet metal and machined parts with part finishing (powder coat, anodize, Alodine and plating), • Experience in design for TEMPEST, EMI MIL-STD-461, MIL-STD-810 (Environmental) and MIL-HDBK-516 (Air Worthiness) requirements, • Experience with additive manufacturing processes, • Experience with cable routing and its application in enclosures, • Strong technical, interpersonal, written, and verbal skills, • Ability to operate effectively in a team environment as well as independently, • US Citizen, • Willingness and ability to obtain a secret clearance Your own unique talents! If you meet some requirements of this position but not 100% of the qualifications outlined above, tell us why you’d be a great fit for this role based on your specific characteristics that align with our values and goals Must be a nimble self-starter who is excited about technology and has the ability to think out of the box and suggest powerful new ideas Nice to have: • Experience with commercial and military documentation, • Experience in writing, or contributed to, Environmental Qualification Testing (EQT) test plans and coordinating with test houses to achieve design verification, • Basic EE knowledge including manufacturing processes for CCAs and grounding strategies, • Experience working with production personnel and creating assembly instructions, • EIA-310 cabinet design and familiarity with Navy Environmental Qualification Testing desired, • Experience in system design, testing, and analysis, • Experience in agile, professional software development environments utilizing revision control, test driven development and continuous integration, • Active Secret Clearance Salary Range: $120,000 - $170,000 More about Fuse: Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job Description We are scientists, engineers, and operators who have spent our careers inside cell therapy manufacturing. We have built the platforms, scaled production, and watched these treatments fail to reach the patients who need them. We are building the technology to close that gap. If this is work you want to do, read on. ABOUT YOU You are a hands-on Senior Mechanical Engineer who turns requirements into working hardware. You move fluidly between CAD and the bench, and you know the difference between a prototype that proves a concept and a design that's ready to build. You take pride in parts that are not just functional but manufacturable and serviceable, and you are comfortable owning the detailed design of components and subsystems while collaborating with fluidics, software, and biology teams to get the whole instrument working. You have instrument and consumables design experience and a track record of translating high-level product and process requirements into prototypes across stages of development, from breadboard through functional verification. Requirements • Translate requirements into mechanical designs—Take product and process requirements and turn them into detailed component and subsystem designs, including material and component selection, make-versus-buy calls, and tolerancing. Work within the broader system architecture set in partnership with systems and senior engineering., • Build, assemble, and test prototype hardware—Hands-on fabrication and bring-up across mechanical, fluidic, and optical subsystems, from first article through functional verification. Drive failures to root cause and iterate quickly., • Design for manufacturability and assembly—Apply DFM and tolerance analysis, develop BOMs, and refine designs for cost, reliability, and serviceability as they mature toward production., • Coordinate with external fabrication and assembly vendors—Work with vendors to get parts made and assembled, managing quality, schedule, and cost on the components you own., • Collaborate across fluidics, software, and biology teams—Work directly with cross-functional partners to understand how mechanical decisions affect process performance and fold those findings back into design changes., • Contribute to design control and documentation—Maintain engineering drawings, BOMs, and design rationale as living artifacts. QUALIFICATIONS • Bachelor's or advanced degree in mechanical engineering or other relevant disciplines., • 5–7 years of relevant mechanical design experience, including instrument or hardware product development; experience with biological or chemical systems in instrumentation is a strong plus., • Direct experience with common fabrication techniques (CNC, sheet metal, molding, forming, stamping, die-cut, 3D printing, etc.)., • Proficiency with enterprise CAD software (e.g., Solidworks, NX, Creo, Onshape, or Fusion360)., • Passion for rapid prototyping and iteration, quickly turning concepts into testable hardware and refining across build-test-learn cycles., • Familiarity with design for manufacturing and assembly, including tolerance analysis and cost optimization., • Experience authoring and executing structured test protocols, capturing data, and writing engineering reports., • High tolerance for executing design work in an environment where requirements are still being defined alongside the biology., • Hands-on experience with laboratory work and collaborating with bench scientists. PREFERRED QUALIFICATIONS • Track record of working in an interdisciplinary R&D / early product development setting., • Experience with regulated product development under 21 CFR Part 820 and ISO 13485, including contributing to design history files., • Familiarity with cell therapy manufacturing workflows, bioprocessing equipment, or related biological manufacturing., • Experience designing disposable consumables, including cartridge interfaces and single-use flow paths., • Experience using simulation tools (ANSYS, COMSOL, SolidWorks Simulation) for thermal, structural, or fluid analysis., • Software-literate and open-source-minded; comfortable scripting to automate design and analysis tasks., • Experience evaluating and working with job-specific AI tools, including using AI/LLM tools to accelerate the mechanical workflow generative and CAD-assisted design exploration, DFM and tolerance analysis, documentation and BOM generation Benefits We offer our employees comprehensive benefits, including medical, vision, and dental coverage, as well as retirement savings plans. Optional benefits include Accident and Term Life offerings. AGENCIES: We work directly with candidates and do not accept unsolicited resumes or referrals from recruitment agencies, search firms, or staffing companies. Any resumes submitted by an agency without a signed agreement in place will be considered the property of Exthymic and no fee will be owed. If you are interested in partnering with us on a future search, please contact our HR team directly.

Job Description #jobalert | DIRECT PLACEMENT | FABRICATOR WELDER | San Diego, CA A long-standing, stable metal fabrication company is hiring an experienced Fabricator Welder to join a growing shop that supports U.S. Navy ship and submarine modernization work, along with commercial fabrication projects. This opening is for someone who can take ownership of a project from raw material to finished part with minimal oversight. The shop is busy, growing, and looking for someone ready to become a key player on a small, tight-knit team. This role offers steady, full-time work, a strong pay range for the region, and a real path to become one of the most trusted fabricators in the shop. • Anticipated $29–$40 hourly, based on experience, • Full suite of benefits: Medical/Dental/Vision, Life Insurance, 401(k) with match, PTO, EAP, • Full-time, Monday–Friday, 8-hour shift Overview: • Fabricate and weld metal components (steel, stainless steel, aluminum) used to upgrade U.S. Navy ships and submarines, from small brackets to large equipment foundations, • Take a project from raw material through cutting, forming, fit-up, and final weld, completing the majority of each job independently, • Read shop drawings and blueprints to build parts to spec without step-by-step direction, • Operate manual and semi-automated fabrication equipment: press brake, shear, lathe, mill, saws, and welding stations, • Shift between weld processes and project scope as work moves from job to job, sometimes more than once in a day, • Contribute to commercial fabrication projects alongside defense-related work Preferred Skills/Experience: • High school diploma or equivalent, • Welding certification(s) preferred; must be able to pass a U.S. government background check, • Valid driver's license and clean driving record (, • 5–7+ years of hands-on metal fabrication experience — not welding alone, • Proven ability to complete a project start-to-finish: cutting, forming, fit-up, and final weld, • Working knowledge of MIG, flux core, and stick welding; TIG welding experience strongly preferred, • Experience fabricating with steel, stainless steel, and aluminum (thin and thick gauge), • Ability to lift up to 70 lbs and work in an open-air shop environment (seasonal heat/cold), • Ability to work independently while following established shop processes Keywords: metal fabrication, fabricator, welder, TIG welding, MIG welding, flux core welding, stick welding, stainless steel fabrication, aluminum fabrication, sheet metal fabrication, blueprint reading, shop drawings, press brake, shear, structural fabrication, Navy shipyard, submarine fabrication, defense manufacturing, fit-up, fabrication technician, precision metal fabrication, welding certification, quality fabrication, custom metal fabrication EEO

Job DescriptionMachinist Location: San Diego, CA 92121 Shift: 1st Shift | Monday–Friday Pay: $30.00–$39.00/hour (DOE) Position Overview We are seeking an experienced Machinist to support the fabrication, modification, and maintenance of precision mechanical components used in next-generation atmospheric water production systems. This is an exciting opportunity to work in a collaborative R&D environment where you'll help transform engineering designs into functional prototypes and support early-stage manufacturing. Key Responsibilities • Set up and operate manual and CNC machine tools, including lathes, mills, drill presses, and grinders., • Fabricate precision parts to engineering drawings, CAD models, and specifications., • Read and interpret blueprints, GD&T callouts, and dimensional tolerances., • Perform in-process and final inspections using calipers, micrometers, height gauges, and other precision measuring equipment., • Maintain and calibrate machine tools and shop equipment., • Collaborate with engineers to improve manufacturability and optimize component designs., • Assist with mechanical assembly and fit-up of prototype systems., • Document machining parameters, work orders, and inspection results., • Monitor material inventory and communicate low-stock needs., • Maintain a safe, organized, and clean machine shop while following all company safety procedures., • Support production scale-up as manufacturing volumes increase.Qualifications, • High school diploma or GED required., • Machinist apprenticeship, vocational training, or Associate's degree in Machining or Manufacturing Technology preferred., • 2–5 years of machining experience in a production, prototype, or R&D environment., • Strong experience operating manual machining equipment., • CNC machining experience (Haas, Mazak, or similar) strongly preferred., • Ability to read engineering drawings, blueprints, and GD&T specifications., • Knowledge of machining aluminum, stainless steel, plastics (HDPE, PTFE), and other materials., • Experience using precision measuring instruments including calipers, micrometers, and CMM., • Welding (TIG/MIG), sheet metal fabrication, or mechanical assembly experience is a plus., • Strong mechanical aptitude, attention to detail, and commitment to quality., • Must be authorized to work in the United States.

Job Description Title: Quality Assurance/Safety Manager Department: Corporate Office Reports to: President/CEO FLSA Status: Exempt Basic Function: Provides direction and manages all day-to-day activities to ensure quality, work item completion, compliance with all federal regulations, audits, and inspections. Serves as C&N Project Manager face to the customer. Responsible for the execution of the requirements of the Quality Management System (QMS) as required by NAVSEA Standard Items and ISO 9001:2015. Provides OSHA and C&N Safety Training as needed to ensure workers are fully aware and prepared for a Total Safety work environment. Provides strategic direction, oversight, and smooth execution of all quality functions within the organization. Duties and Responsibilities: • Planning, scheduling, and completion of work on major systems and equipment ensuring Objective Quality Evidence (OQE) is complete and accurate to substantiate deep cleaning and structural, sheet metal, decking, furniture, electronic and other repairs for government (Federal, State, and Local), military, and commercial work specifications. Coordinates all aspects of complex and critical work availabilities, ultimately ensuring Tests and Inspections are properly scheduled, conducted, and reported including real time updates to C&N Universe, Inc. (C&N) Test and Inspection Plans (TIPs). Responsible to ensure OQE is submitted in a timely manner to meet requirements imposed by C&N customers supporting production planning and major milestone reporting., • Conducts detailed technical review for the development, approval, and issuance of Process Control Procedures (PCP's) and Enhanced Process Control Procedures (EPCP's) for critical systems and equipment. Able to translate basic information from work specifications, and technical documentation from NSTM's, Mil Standards, and OEM technical manuals, for submission to the appropriate approval authority ensuring full compliance and documentation of all Objective Quality Evidence (OQE) supporting final work certification., • Demonstrates complete understanding of the in-depth requirements associated with the performance of various types of equipment test memorandums. Extensive knowledge in the identification of QA requirements identified in system prints and drawings, NSTM's, Military Standards, and technical publications including the ability to clearly interpret these references on the deck plates while demonstrating sound decision making and effective coordination resolving differing opinions in interpretation of requirements to the satisfaction of C&N customers while ensuring full compliance for work certification., • Ensures the safe conduct of in-process and final operational checkpoints which requires not only an understanding of the technical aspect of the test, but also all required safety practices, undistracted situational awareness, and complete focus on the task., • Provides OSHA and C&N Safety Training as needed to ensure workers are fully aware and prepared for a Total Safety work environment., • Conducts complete review, revision, and issuance of C&N QMS manual(s), procedures, work instructions, and all associated forms. Maintains accountability for all quality system records., • Ensures compliance for all external audits conducted by Prime Contractors and Governmental Agencies. Prepares and conducts customer compliance inspections and evaluation of subcontractors for QMS program effectiveness. Able to conduct detailed process review ensuring compliance with C&N's programs, procedures, and technical requirements., • Evaluates processes and procedures. Identifies, develops, and implements preventative Quality and Safety actions. Promulgates and executes the completion of internal corporate process audits and extensive QA surveillance programs. Oversees the evaluation and assessment of QMS Program compliance of C&N facilities in the San Diego area supporting "full compliance" audits by regional government offices., • Initiates Corrective Action Reports required for the correction of deficiencies/ discrepancies related to completion of work items. Determines corrective actions by conducting in-depth process review resulting in the identification of root cause, corrective, and preventative actions. Evaluates completion and effectiveness of required actions including compilation of detailed trend analysis. Ensures effective corporate self-evaluation and internal non-conformance/ compliance procedures are established and maintained to minimize externally generated corrective actions., • Develops, implements, and executes C&N Quality Management System training program including 50 annual training topics. Conducts QA and Safety related training in support of C&N's approved QA Annual Training Plan and Continuous Safety Instruction and prepares and conducts situational training as may be required. Continually evaluates current trends to increase training effectiveness and improve employee performance., • Provides direct support to Supervisors in de-conflicting issues related to Certificate of Completion (COC) and final billing submission as required relating to Objective Quality Evidence and Test and Inspection Plans., • Other duties may be assigned. Minimum Qualifications: • Minimum 10 years ship repair/ shipyard related experience and strong mechanical aptitude., • Mastery in the application of ship repair technical specifications and industry requirements supporting the repair of complex and critical systems and equipment., • Must possess extensive knowledge of NAVSEA Standard Items, ISO 9001:2015, and notional differences in QA system requirements in relation to Government/ Military/ ABS and Commercial work specifications., • Professional acumen demonstrating effective communication (both verbal and written) for coordination, scheduling, and completion of inspections with ships personnel, contractors, subcontractors, vendors, customers, and employees., • Possess a great eye for detail, a willingness to embrace and endorse strict processes and policies and the ability to accurately document the completion of all tests., • Proficiency in Microsoft Office applications, managing paper based and digital record environments, and ability to adapt to CMS Contract profile, administration, and management. Environmental Factors/ Physical Demands: • Must be able to perform these as well as Essential Function(s) with or without reasonable accommodation and without posing a direct threat to safety or health of employee or others., • Work under compressed timelines, and other resource limitations., • Work in a wide variety of environments, conditions, and/or situations; including:, • Working around or with systems of high temperature, high pressure, and high voltage which may or may not contain flammable liquids or involve rotating machinery., • Small and/or confined spaces., • Must be able to work at heights of 20 feet or more., • Will routinely bend, twist, kneel, climb, and reach for 1-12 hours per day., • Will sit, stand, and walk for 1-12 hours per day., • Will endure noise, fumes, dust, and inclement weather., • Must be able to safely wear a respirator when needed.

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Do you thrive in innovative, design-driven environments with a high level of both accountability and trust? Are you passionate about delivering elegant hardware solutions with the right amount of engineering rigor? Are you seeking a technical role where you can take initiative? If so - we want to hear from you! Fuse is looking for a mid-level Mechanical Engineer to join our team onsite in San Diego, CA. We’re looking for a mechanical engineer that can balance discipline and attention to detail with outside-the-box thinking and an innovative problem-solving attitude. Must be a pragmatic and mission-driven self-starter. Apply your analytical and detail-oriented mindset to develop, own, and improve Fuse’s products for U.S. defense agencies that improve the sharing of information among warfighters distributed throughout airborne, maritime, and ground environments. Through a collaborative effort with the Electrical, Systems, and Production teams, this role will support Fuse Engineering to build communications, networking, and computing solutions for the warfighter. This is a mid-level role with great potential for growth. Warfighter-focused design and development is at the heart of Fuse processes. Throughout Fuse development our experienced team applies the best practices of commercial design-thinking, coupled to the DoD systems engineering framework. The coupling of commercially proven design with rigorous systems engineering gives Fuse an ability to rapidly design, develop and field solutions well inside of typical military design cycles. Fuse rapidly innovates, putting creative concepts into action and refining those concepts through hands-on testing, user evaluation, and iterations. What you'll do: • Implement mechanical systems, equipment, and packages for customers and internal programs that meet requirements and expectations, • Support, design, and develop dynamic tactical communications systems, • Mechanical design and development for sustaining engineering of our flagship and existing products including dynamic tactical communications systems, • Perform trade studies and participate in equipment selection, • Generate, review, and maintain mechanical drawings, bills of materials (BOMs), work instructions, and releasing of mechanical prints, • Interact with vendors to quote and produce mechanical parts and assemblies, • Participate in engineering/design reviews, • Conduct feasibility studies and testing on new and modified designs, • Support prototype and first article hardware builds, • Support integration between hardware, software, and network systems, • Conduct and support test planning, execution, and post-event reporting, • Interpret and research system interface documents in support of designing/defining/documenting how systems will interconnect, • Translate customer requirements into subsystem and system specifications, • Provide on-site and distance operational support, • Limited Travel may be required Requirements • Bachelor’s degree in Mechanical/Aerospace Engineering and 4+ years of experience, • Familiarity with Engineering Drawing Practices Y14.100 and Geometric Dimensioning and Tolerancing Y14.5, • Expert level of capability with Solidworks software including experience with eDrawings and Model Based Definition (MBD) of products and assemblies Y14.41, • Experience with fabrication methods for sheet metal and machined parts with part finishing (powder coat, anodize, Alodine, and plating), • Understanding of additive manufacturing processes and fabrication methods for sheet metal and machined parts, • Understanding of cable routing and its application in enclosures, • Must be a nimble self-starter who is excited about technology and can think out of the box and suggest powerful new ideas, • Experience working with production personnel and creating assembly instructions, • Strong technical, interpersonal, written and verbal skills, • Ability to operate effectively in a team environment as well as independently, • Demonstrate ownership and accountability of product designs, • Ability to obtain US SECRET Clearance, • US Citizen Your own unique talents! If you meet some requirements of this position but not 100% of the qualifications outlined above, tell us why you’d be a great fit for this role based on your specific characteristics that align with our values and goals Nice to have: • Experience with commercial and military documentation, • Experience with presenting technical data to small to medium sized external customer groups (both Technical and programmatic audiences), • Experience in design for TEMPEST, EMI MIL-STD-461, MIL-STD-810 (Environmental), MIL-HDBK-516 (Air Worthiness), ARINC 404, and/or ARINC 600 requirements, • Basic Electrical Engineering knowledge including manufacturing processes for Circuit Card Assemblies and grounding strategies, • Basic understanding of Configuration Management practices with experience with Solidworks PDM, • Experience with Solidworks Simulation analysis (or similar software) to include Structural Static/Fatigue, Thermal (Conduction and Convection) and Computational Flow/Fluid Dynamics (CFD), • Experience in designing routing cable assemblies using software-based tools such as Solidworks Electrical 3D and Schematics., • Experience in system design, testing, and analysis, • Experience in agile, professional software development environments utilizing revision control, test driven development and continuous integration, • Active Secret Clearance More about Fuse: Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Salary: $95,000 - $130,000 Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job Description Join our fast-paced and passionate team as a Mechanical Engineer 3. As we scale, you will be instrumental in building our foundation from the ground up. This is a dynamic, hands-on role for a self-starter who thrives in a fluid startup environment. You'll have the opportunity to work on cutting edge technologies, work closely with leadership, and develop and implement engineering practices that support our mission and growth. Your key responsibilities are as follows: • Work independently and in a team while over communicating with the manager, project engineer and the teammates. Will mentor junior engineers., • Execute complex engineering tasks involving planning, preparation, data/information collection and analysis and decision-making in a process involving peer reviews and documentation of the results., • Use tenacity, patience, self-discipline and passion for excellence to assure accuracy of execution schedule, data quality/integrity, conformance to company best practices, clarity in communication and documentation., • Use every opportunity to grow competency thru mentorship, curiosity, communication, exposure and initiative. Requirements • This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Experience: • A bachelor’s degree in mechanical engineering, Physics, or a related field., • Minimum of 5 years of relevant experience, ideally within a startup or technology company. Skills: • Deep working knowledge of multiple ME topics and strong understanding of standard mechanical engineering degree curriculum., • Deep understanding of material properties, mechanisms, fabrication methods: CNC milling, CNC turning, sheet metal, injection molding, laser cutting, water jet cutting, and 3D printing (metal and plastic)., • Deep understanding of designing for photonic assembling methods: Die bonding, vacuum reflow soldering, wire-bonding, adhesives, etc., • Deep understanding of structural theory: static, modal, random vibration, shock, etc., • Deep understanding of fluids and heat transfer theory: conduction, convection and radiation., • Demonstrated successful execution of engineering tasks including use of mechanical CAD (SolidWorks preferred) and quantitative analysis/programming tools (Python), instrumentation and measurement, part fabrication or procurement, integration and test, data collection, analysis (ANSYS Workbench) and documentation. Startup Mindset: • You're creative, flexible, and eager to wear multiple hats., • You're passionate about building systems from the ground up and comfortable with ambiguity and change. Benefits The expected annual salary range for this position is $125,000-$175,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description Department: Laser Reports To: Shop Supervisor Employment Type: Full-Time, Non-Exempt Position Summary The Punch/Laser Programmer is responsible for creating accurate, efficient CNC programs for AMADA punch and laser machines. This role supports production by converting engineering drawings into machine-ready programs, optimizing tooling paths, and ensuring high-quality, cost-effective manufacturing of sheet metal components. Key Responsibilities • Develop CNC programs for AMADA punch and laser machines using AMADA software (AP100, Dr.ABE, VPSS 3i, or equivalent)., • Interpret engineering drawings, blueprints, and specifications to generate accurate part layouts., • Optimize tool paths, nesting, and material utilization to reduce waste and improve efficiency., • Select appropriate tooling, punches, dies, and cutting parameters based on material type and thickness., • Collaborate with Machine Shop Supervisor, engineers, and operators to ensure manufacturability and accuracy., • Troubleshoot programming issues and adjust programs as needed for quality or production changes., • Maintain organized program files, revision history, and documentation., • Support continuous improvement initiatives related to programming, tooling, and workflow., • Ensure all programs meet company quality standards and safety requirements.Qualifications, • 2+ years of experience programming AMADA punch or laser machines (preferred)., • Proficiency with AMADA programming software (AP100, Dr.ABE, VPSS 3i, or similar)., • Strong understanding of sheet metal fabrication, tooling, and manufacturing processes., • Ability to read and interpret technical drawings and GD&T., • Experience with nesting strategies and material optimization., • Strong problem-solving skills and attention to detail., • Ability to work in a fast-paced production environment with tight deadlines., • Basic knowledge of CNC machine operation is a plus.Physical Requirements, • Ability to stand, walk, or move around the shop floor as needed., • Ability to lift up to 25 lbs occasionally., • Use of PPE required (safety glasses, steel-toe shoes, hearing protection when applicable).

Job DescriptionDescription:Work Local in South San Diego – Skip the Commute Stop spending your life on the I-5 and I-805. AP Precision Metals is seeking dependable Painters - Powder Coat Operators who live in Chula Vista, Eastlake, Otay Mesa, or nearby South County communities and want a stable manufacturing career close to home. Whether you're an experienced powder coater or have manufacturing experience and are eager to learn, this is an opportunity to join a growing company with modern equipment, long-term customers, and opportunities for advancement. About AP Precision Metals, Inc. AP Precision Metals, Inc. is San Diego's leading commercial metal fabricator, specializing in simple to complex assemblies for many of Southern California's largest OEMs. Founded in 1999, AP Precision has grown consistently for over 25 years through investment in advanced manufacturing equipment, operational stability, and employee development. Our 40,000 sq. ft. South San Diego facility includes state-of-the-art laser cutting, CNC forming, welding, powder coating, machining, hardware insertion, assembly, and shipping operations serving commercial, transportation, architectural, and defense-related industries. Position Summary We are seeking a dependable and detail-oriented Powder Coat Operator to support our powder coating department. This position is responsible for preparing, coating, curing, inspecting, and handling metal parts while maintaining high standards of quality, safety, and productivity. Successful candidates take pride in producing high-quality finishes, maintaining an organized work area, and working efficiently as part of a manufacturing team. Job DescriptionPowder Coating Operations • Hang, mask, prepare, and powder coat metal parts according to work instructions and customer specifications., • Operate powder coating equipment, spray guns, curing ovens, and related finishing equipment., • Verify proper coating coverage, finish quality, and cure requirements., • Remove, inspect, and package finished parts for the next production operation., • Maintain clean racks, hooks, and powder coating equipment.Material Handling, • Move parts, racks, and materials throughout the powder coating department., • Stage production jobs according to production schedules., • Assist with loading and unloading curing racks and production fixtures., • Maintain organized work areas and material flow.Quality & Safety, • Perform visual inspections to ensure coating quality meets customer and company standards., • Report coating defects, equipment issues, or production concerns to supervisors., • Follow work instructions, quality standards, and production schedules., • Maintain clean work areas in accordance with company housekeeping and 5S standards., • Follow all safety procedures and properly use required personal protective equipment (PPE).Team Support, • Assist other production departments as workload requires., • Participate in cross-training opportunities., • Support continuous improvement initiatives., • Work collaboratively with supervisors and fellow production employees.Compensation & GrowthCompensation $19.00 – $24 per hour, depending on experience and qualifications. Career Growth AP Precision Metals believes in promoting from within. Successful employees have opportunities to advance into positions including: • Powder Coat Lead, • Production Lead, • Quality Inspector, • Shipping & Logistics, • Manufacturing Supervisor We provide on-the-job training and encourage employees to develop new manufacturing skills throughout their careers. Work Environment • Full-time, in-person position at our South San Diego (Otay Mesa) manufacturing facility., • Fast-paced production environment with modern powder coating equipment and manufacturing technology., • Regular interaction with fabrication, welding, assembly, shipping, and quality departments.Work Schedule, • Full-time position, • 1st Shift: Monday–Friday, 6:00 AM – 2:30 PM, • Overtime available based on production requirements.Benefits, • Competitive compensation package, • Health, dental, and vision insurance, • IRA retirement plan, • Paid time off and company holidays, • Stable, year-round employment with a growing manufacturing company, • On-the-job training and opportunities for career advancementRequirements:Experience & Skills, • Previous powder coating, painting, manufacturing, or industrial finishing experience is preferred but not required., • Experience in sheet metal fabrication or manufacturing is a plus., • Ability to safely operate hand tools and manufacturing equipment., • Mechanical aptitude and the ability to follow written and verbal work instructions., • Forklift experience is a plus but not required.Personal Qualifications, • Reliable, punctual, and dependable., • Strong attention to detail and commitment to producing quality work., • Positive attitude and willingness to learn., • Ability to work independently and as part of a team., • Ability to maintain productivity in a fast-paced manufacturing environment.Physical Requirements, • Ability to safely perform the essential functions of the position, with or without reasonable accommodation., • Ability to regularly lift, carry, and move materials weighing up to 25 pounds, and occasionally up to 50 pounds with assistance or appropriate lifting equipment., • Ability to stand, walk, bend, reach, and move throughout the manufacturing facility for extended periods during scheduled shifts., • Ability to perform repetitive production tasks including hanging, masking, powder coating, unloading, and inspection of metal parts., • Ability to safely wear required personal protective equipment (PPE), including gloves, eye protection, hearing protection, protective clothing, and respirators where required., • Ability to safely work around industrial powder coating equipment, curing ovens, forklifts, and moving production materials., • Ability to work in a typical manufacturing environment with varying temperatures, industrial noise, dust, and exposure to finishing materials.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: Cleans and prepares metal surfaces for painting. Removes dirt, grease, scale and other contaminants. Masks and tapes areas not requiring painting. Paints parts, equipment and structural surfaces on interiors and exterior of machines and parts. Mixes material in accordance with product data sheet. Inspects prepared painted areas and performs touch-up work as needed. Performs other related tasks as assigned, some which may become essential to the position. ESSENTIAL FUNCTIONS: • Set up tools and equipment to clean and prep machines or parts for painting., • Set up tools and equipment to mix and paint materials and perform paint application using synthetic enamels, acrylic enamels, urethanes, and CARC coating according to PDS. This also includes hand painting in designated areas, inspect work for touch-up., • Operates heavy equipment for movement around yard or shop. Operates high reach equipment to prepare surfaces and to apply coating in hard-to-reach elevated areas., • Maintains tooling., • Applies films and decals, • Sandblasts, preps, sands, tapes, paints, and decals heavy equipment, trucks, and trailers, • Uses auto body techniques, Bondo, fiberglass, and SMC plastic repair, • Checks and maintains inventory of paint and supplies., • Performs housekeeping on assigned work areas, during and at completion of work. Removes scrap and performs general cleaning and sweeping., • Must adhere to all state and local regulations and work within the companies painting permit to avoid violations., • Must maintain timely paint records. (Daily, monthly, quarterly, yearly.), • May assist other team members during down time., • Guide/mentor/train technicians with less expertise., • Performs additional duties as directed by supervisor. EDUCATION, EXPERIENCE, AND SKILLS REQUIRED: • Must have a high school diploma or equivalent., • Must have 1 to 3 years of experience with hand brush and spray-painting application or be SSPC C-12 Certification accredited., • Must have knowledge of surface preparation procedures, proper use and mixing of paints. 4. Must have the ability to read and understand product data sheets., • Must have ability to identify paint application requirements and equipment needed for coating application., • Must have the ability to work at heights, in confined spaces, and be able to work any shift., • Must comprehend written and verbal instructions and hear warning signals, read and comprehend safety instructions, regulations and warning., • Strong attention to detail, • Ability to work well with others., • Ability to work within deadlines and with changing priorities in a fast-paced environment, • Must have a valid California class C driver's license and a clean driving record. PHYSICAL DEMANDS: • Walking and moving about on foot often through uneven terrain., • Hands/arms operating equipment, hand and power tools., • Handling: Works with hands., • Lifting: Raises or lowers miscellaneous equipment parts and tools, up to 50 lbs. with frequent exertion., • Reaching: Extends hands and arms in any direction., • Stooping: Bends body downward and forward by bending at knees or waist., • Standing: Remains in standing position if required to perform various functions of the job., • Vision: Reads work tickets, parts and service books and operates heavy equipment., • Talking: Communications via telecommunications and in person., • Climbing: May climb on and off various equipment., • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person., • Sitting: Sits in equipment and vehicles., • Laying: Lies in prone position under vehicles and equipment. ENVIRONMENTAL: • Noise: Works in conditions with constant or intermittent noise., • Temp/Weather: Works outside in shop with variations of temperature and weather., • Exposure: Foul odors, fumes and harsh substances. Here's what we Offer... • Competitive Compensation, • A great work environment and culture, • Career growth and advancement opportunities, • Training, • Medical, Dental and Vision plans, • Medical Video Appointments available, • Health Savings Account available, • Paid Time Off (PTO) Pay, • 401(k) Plan + Company Matching, • Health and Dependent Care Flexible Spending Accounts, • Life & Accident Insurance, • Employee Assistance Programs, • Legal Plan, • Travel Assistance Plan, • Wellness Programs, • Referral Bonus Program, • Longevity Bonus Program, • Recognition Programs and much more, • Hawthorne CAT discounts, • Boot Reimbursement, • Tuition Reimbursement, • Company-Supplied Uniforms, • Advanced Technical Training, • Estimated Compensation $25.00 - $33.00 per hour Interested in joining the Hawthorne team? Check out our current available positions at: www.hawthornecat.com/careers ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat Participates in E-Verify.

Overview General : The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in San Diego, CA and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: High School Diploma or GED A minimum of three to four years of applicable welding experience ASNT NDT Level III Certification preferred. One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other preferred. Skills and Proficiencies: Read and interpret specifications Read and understand shipboard installation drawings, blueprints, and job orders Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc. Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment Weld parts together using gas welding, or brazing and any combination of arc welding processes Perform thermal cutting and grinding Repair broken or cracked parts, fill holes, and increase size of metal parts Supervisory and leadership skills Safety and Physical Requirements: Occupation Safety Haz-Mat Certification Shipyard Competent Person Certification Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification Working in Confined Spaces Certification Training and the Ability to Safely Lift and Move Objects of 100 LBS Security and Work Locations: Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA You will work at government facilities.You must be a US Citizenship eligible for clearance. You must pass a background investigation You must have a valid driver's license This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy. Other Responsibilities: Work overtime upon management request Maintain and safeguard company equipment and tools Maintain and safeguard welding inventory Organize and schedule welding jobs to an on-time completion Pay range: $28.80 - $43.20 We offer an excellent benefits package including A competitive salary Medical, dental, vision, life, and disability insurance Paid-time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Physical Requirements: Lifts at least 100 pounds at one time and 60 pounds for an extended period of time. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences. Possible travel locations include the below but not limited to: San Diego, CA Vallejo, CA Everett, WA Seattle, WA Portland, OR Groton, CT Mayport, FL Panama City, FL Charleston, SC Pearl Harbor, HI Portland, OR Earl, NJ * Guambfb3568a-762b-4989-884b-a9682aa104ca

Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment.

Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment.

Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment.

Summary You will serve as a SHEET METAL MECHANIC LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in Shop 17. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help • You will manufacture, assemble, install, remove, and repair ventilation, furnishings, and items including but not limited to nonstructural bulkheads and overheads., • You will provide technical expertise on work instructions, interpreting instructions, and resolving problems for the sheet metal employees assigned to a project., • You will conduct shipboard pre-work inspections to determine if the work is in compliance the technical work document requirements, and make recommendations to resolve complex problems., • You will report to supervisors on the status and progress of work, nature of work delays and answer questions on overall work operations and problems., • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules. Requirements Help Conditions of employment • Must be a US Citizen., • Must be determined suitable for federal employment., • Must participate in the direct deposit pay program., • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326., • Males born after 12-31-59 must be registered for Selective Service., • This is a bargaining unit position., • You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations., • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal., • You will be required to obtain and maintain a current valid United States driver's license., • You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases., • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift., • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs., • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time., • You will be required to obtain and maintain a U.S. Passport., • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision., • This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces., • This position may require rotating shift work., • This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight., • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required. Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: https://wageandsalary.dcpas.osd.mil/BWN/AFWageSchedules/ SALARY: Puget Sound Naval Shipyard: WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf CA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/AMA017017SanDiego,California.pdf Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/044/044R-25Nov2025.pdf Portsmouth Naval Shipyard: ME: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/087/087R-02Jan2025.pdf CA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/017/017R-02Jan2025.pdf Norfolk Naval Shipyard: VA:https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/140/140R-09Jul2024.pdf PA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/115/115R-02Jan2025.pdf This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job DescriptionDescription: AP Precision Metals, Inc. is San Diego's leading commercial sheet and plate metal fabricator. We are a valuable and long-term supplier to some of San Diego's biggest OEMs, providing a wide range of sheet metal components, weldments, and other metal assemblies. Our entire operation is located at our 40,000 sq. ft. factory located 10 minutes north of the Tijuana/San Diego border and a 5 minute walk from the Iris Trolley station. The company was founded in 1999 by Lane Litke and Victor Miller, and thanks to reliable and honest leadership and the hard work of our entire team, AP Precision has grown an average of 20% per year for the last 25 years. Over the last two decades, we have invested millions of dollars in cutting-edge manufacturing machines and made equally significant investments in employee training and advancement. Many of our employees have been with us for 5, 10, and even 15 years. A generous IRA program, healthcare, shift differentials for 2nd shift, and a focus on regular training have allowed us to take many employees from unskilled labor to high-paid technicians. We take pride in the customers we serve and just as much pride in the health and success of our team and their families. The following pages contain job descriptions for key positions at AP Precision Metals. Each description includes purpose, responsibilities, qualifications, and pay ranges. General requirements across all positions include: • Ability to work safely in a manufacturing environment, • Strong commitment to quality and ISO9001 compliance, • Ability to stand for extended periods and lift up to 25-50 pounds as needed, • Reliability, punctuality, and teamwork, • Adherence to company policies, safety standards, and 5S/housekeeping practices Job Description – Driver Job Title: Driver Department: Shipping & Logistics Reports To: Shipping Supervisor / Production Supervisor Pay Rate: $22-$26 per hour Purpose The Driver is responsible for the safe and timely delivery of finished goods to customers and vendors using a 25’ stake bed truck. This position requires strong communication skills, professionalism, and attention to detail, as the driver will frequently interface with customers and represent the company during deliveries. Requirements: Primary Duties • Perform daily deliveries of finished goods within San Diego County using the company’s 25’ stake bed truck., • Safely transport products to customers and vendors in accordance with traffic laws and company policies., • Load, pack, and unload parts with accuracy, ensuring product quality and preventing damage., • Count and verify deliveries and shipments against shipping documents., • Maintain a clean driving record and adhere to all traffic and safety regulations., • Communicate effectively with customers, vendors, and internal staff during deliveries., • Represent AP Precision Metals in a professional, courteous, and customer-focused manner., • Follow all safety requirements, ISO9001 procedures, and company standards. Additional Duties (as required) • Assist with shipping and receiving activities as directed., • Maintain cleanliness of the stake bed truck and shipping area., • Report vehicle condition and assist with basic truck maintenance checks., • Interface with management as needed regarding delivery schedules, customer issues, or logistics concerns. Qualifications • Valid driver’s license with a clean driving record., • Strong English speaking and communication skills., • Personable, professional, and customer-focused demeanor., • Detail-oriented and organized, with ability to verify and track shipments accurately., • Previous delivery or truck driving experience preferred., • Ability to perform light physical work, including loading and unloading shipments., • Must be available for 1st shift (6:30 AM – 3:00 PM) with flexibility for occasional overtime when shipments run late. Physical Requirements • Ability to lift up to 25 pounds., • Ability to stand for extended periods while performing inspections., • Comfortable working in a manufacturing environment with exposure to noise, machinery, and sheet metal handling.

A well-established mechanical contractor is seeking an experienced Project Manager to oversee commercial HVAC, plumbing, piping, and sheet metal construction projects from preconstruction through closeout. With more than 90 years of experience, the company delivers design-build, engineering, prefabrication, virtual design (VDC), construction, and building automation solutions across a wide range of commercial and institutional markets. Projects include commercial offices, healthcare, life science, laboratories, biotech, K-12, higher education, military, manufacturing, hospitality, industrial, and tenant improvement work. • Manage commercial mechanical projects from preconstruction through closeout, • Oversee HVAC, plumbing, piping, and sheet metal scopes throughout project execution, • Develop and maintain project schedules, budgets, and cost forecasts, • Coordinate subcontractors, vendors, fabrication, and field operations, • Manage RFIs, submittals, change orders, purchase orders, and project documentation, • Work closely with VDC, engineering, prefabrication, and field teams throughout project delivery, • Coordinate design-build projects from concept through commissioning, • Track job costs, billing, forecasting, and overall financial performance, • Conduct owner, architect, consultant, and subcontractor meetings, • Support project turnover including punch lists, O&M manuals, as-builts, and closeout documentation, • Commercial HVAC, • Plumbing & Mechanical Piping, • Sheet Metal & Ductwork, • Design-Build Mechanical Systems, • Healthcare & Hospitals, • Life Science & Biotech, • Laboratories, • K-12 & Higher Education, • Military & Government Facilities, • Commercial Office, • Manufacturing & Industrial, • Hospitality & Hotels, • Tenant Improvements, • 8+ years of Project Management experience with a mechanical contractor, • Strong experience managing commercial HVAC projects required, • Experience with plumbing, sheet metal, ductwork, and mechanical piping preferred, • Design-build project experience strongly preferred, • Strong understanding of construction scheduling, budgeting, procurement, and cost control, • Experience coordinating VDC/BIM, fabrication, engineering, and field operations preferred, • Ability to read and interpret mechanical drawings and specifications, • Proficiency with Procore, Bluebeam, Microsoft Project, or similar construction software, • Strong leadership, communication, and client relationship skills, • Performance-based bonus potential, • Medical, dental, and vision insurance, • 401(k), • Paid holidays and PTO, • Long-term career growth with a full-service design-build mechanical contractor, • Opportunity to work on complex commercial mechanical projects across Southern California

Job Description Industrial Metal Supply, founded in 1948, is a leading metals distributor with seven locations serving California and Arizona. Industrial Metal Supply cares about the day-to-day experience of every single employee. When you join the IMS team you will be accepting more than a job – you’ll be starting your path to leadership. Employees make up the 75-year-old foundation built on offering exceptional customer service, in fact, IMS sets the standard for service in its industry. Material Handlers are integral to the success of our business. It is where the process starts. You will pull, pack and wrap metal bar, sheet, plate and tube to be picked up by customers in our one-of-a-kind will call department. RESPONSIBILITIES: • Safety is the company’s number one priority. If you are like-minded, you will fit perfectly within the IMS culture of safety. The team helps ensure a clean, organized and safe environment is always maintained in the warehouse., • A detailed 7-week onboard training program giving you hands-on experience within all departments and shifts so you feel fully prepared for your job duties., • You will learn to use our business software program to pull inventory and process orders., • Your attention to detail will ensure customer material is of the highest quality for our customers, every time., • You will be pulling, packing and wrapping the material while adhering to our Quality System. You will use the tape measure, calipers or micrometers to confirm material dimensions as requested by our customer, • On a daily basis you will fulfill many orders in a fast-paced environment, which will include moving material with a forklift, and you may be required to lift up to 50 pounds repetitively throughout your shift., • Safety and Compliance:, • Adhere to all company safety policies and procedures, including wearing appropriate personal protective equipment (PPE)., • Participate in safety training programs., • Maintain a clean and organized work area., • Report any safety hazards or incidents to the supervisor immediately., • Follow proper lifting and material handling techniques to prevent injuries., • Comply with all environmental regulations related to material handling and storage.Basic Qualifications:, • Must be 18 years and older, • Experience of 6 months to 1 year in material handling preferred in a metal manufacturing environment., • Ability to work independently and as part of a team., • Good communication and interpersonal skills.LIFE AT IMSThe Company strongly believes that the more diverse our team, the better our work will be. We are committed to equal opportunity employment and celebrates inclusion in all circumstances. As an employee, you can expect:, • A supportive, inclusive atmosphere on a team that values your contributions., • An attractive and competitive compensation package., • Opportunities for growth and development via work experience and offerings from our HR/People Resources team and Learning and Development program., • Frequent in-office events, lunch and learns, volunteer opportunities, and more., • A generous and well-rounded benefits program featuring Vacation , Sick Leave, gas subsidy, comprehensive medical benefits, retirement plans, tuition reimbursement, 401k with company match, and much moreThe Company believes that each team member makes a significant contribution to our success. That contribution should not be limited by the assigned responsibilities outlined in a job description. Therefore, this job description is designed to outline primary duties, qualifications and job scope, but not limit the employee or the organization to just the work identified. It is our expectation that each team member will offer his/her services wherever and whenever necessary to ensure the success of our endeavors and to pursue individual career growth. Compensation Disclaimer: The salary range listed for this position reflects the potential earning range for the role. Starting compensation is determined based on a variety of factors, including relevant experience, skills, qualifications, education, and internal equity. Not all candidates will be hired at the top of the posted salary range. Monday through Friday: 2:00 pm to 10:30 pm Saturdays as needed

You will assess damaged parts to determine the sequence of operations necessary for sheet metal repairs or replacements.You will remove fixed sheet metal and composite structures from aircraft and disassemble structural and non-structural metal and composite components.You will use hand or power too

You will independently perform the full range of aircraft sheet metal mechanic duties, including the most complex repairs and fabrications on various aircraft types. Performing a full range of aircraft sheet metal mechanic duties, which include complex repairs and fabrications on various aircrafts;.

Aircraft Sheet Metal Mechanic Duties. You will independently perform the full range of aircraft sheet metal mechanic duties, including the most complex repairs and fabrications on various aircraft types.

Domestic DIB, MRTFB Direct Hire Authority.This is a public notice flyer to notify interested applicants of anticipated vacancies.Applications will not be accepted through this flyer.Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered.Notice o

The duties of this position include:.Manufacturing, assembling, installing, removing, and repairing ventilation, furnishings, and items including nonstructural bulkheads and overheads.Providing technical expertise on work instructions, interpreting instructions, and resolving problems for the sheet

The duties of this position include:.Manufacturing, assembling, installing, removing, and repairing ventilation, furnishings, and items including but not limited to nonstructural bulkheads and overheads.Providing technical expertise on work instructions, interpreting instructions, and resolving prob