Shoes jobs in Chula Vista, CACreate job alerts

Job Description Labor One is hiring Shipfitter Helpers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for assisting with steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges while under the supervision of a supervisor and/or journeyman / 1st Class shipfitter. The position requires a basic understanding of structural repair procedures and a strong aptitude and ability to follow directions. The individual must possess knowledge of ship terminology, measurements, and the ability to read job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions and general correspondence., 2. Working understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to effectively communicate issues encountered during the job that are in conflict with the directions provided by the supervisor or journeyman / 1st class fitter., 5. Ability to read and interpret structural drawings, including weld symbols., 6. Basic understanding of hand and power tools used by shipfitters including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 7. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Up to one (1) year of experience in a heavy industry. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, before commencing work., 6. Complete daily work assignments and provide status of unfinished work to the journeyman or supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Inventory Management Specialist IV will help ensure sufficient inventory levels while reducing losses and inefficiencies. An Inventory Management Specialist IV (IMS IV) will perform the below duties in accordance with ASRC Federal ISO certified processes under direct guidance ASRC Federal Site Management personnel and others as assigned. Location: Naval Air Station (NAS) North Island, San Diego, California Schedule: Monday-Friday, 5:30am-2:00pm Hourly Rate: $19.67 Health & Welfare: $4.98/hr (as required by the SCA for the sole purpose of purchasing benefits.) Primary Duties and Responsibilities • Will perform Kind, Count and Condition (KCC) validation while processing receipts. Will segregate, stage and deliver bench stock material from Central staging area to designated depot shop., • Places bench stock material into bins or other storage locations as designated by site management., • Perform a Visual check inventory of all assigned bin locations daily and scan bins at or below the reorder point listed on the bin label., • Makes entries into computer via keyboard and scanners., • Apply bar code labels to bins as required., • IMS IV will be expected to quickly route customer concerns to site management for resolution., • 3-5 years of customer service experience., • Previous experience in customer service, inventory, shipping/receiving or administration is preferred., • Ability to obtain SECRET clearance., • Daily requirement to lift a minimum of 40 pounds., • Requires individual to stand or walk for extended periods of time., • May be required to operate material handling equipment such as pallet jack, delivery cart, etc., on a daily basis., • Must understand and read basic instructions., • May be required to wear hearing protection, safety goggles. Must wear OSHA approved safety shoes., • Must be energetic and confident with sound practical judgement and good communications skills., • Prior DOD bench stock experience highly desirable., • High school diploma or equivalent, • Access to Medical, Dental, Vision, STD & Life Insurance, • Access to 401k, • Paid Time Off, • Sick Leave, • Paid Federal Holidays, • Retention Bonuses

Job Description Labor One is hiring Journey-Level Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: -This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. -The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE: 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES: 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT: -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionMachine Operator - Process Technician - Kearny Mesa - 1st Shift/2nd shift Please apply and call at 503/403/1936 - Ask for Jesus - Recruiter in San Diego Position: Machine Operator / Process Technician Location: Kearny Mesa -San Diego, CA 92123 • 1st shift - 7am to 3:30pm- $18.00/hour, • 2nd shift - 3:15pm to 11:45pm $18.75/hour OT can be either before or after the shift Job Description: • Will perform set-up and basic troubleshooting of equipment to prep for processing, • Must be able to operate and set-up basic process or production equipment, • Troubleshooting experience, • Working with small parts, • Will use microscope about 20-40% of the day, • Looks like a lab/hospital inside/cleanroom – room temperature, • Wearing cleanroom garments for the entire shift that covers body, hair, shoes and a mask., • High school diploma or GED 10 paid holidays/year as an Aerotek employee Pay and Benefits The pay range for this position is $18.00 - $19.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Sep 12, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Machine Operator – 1st & 2nd Shift San Diego, CA | $19.50/hr (1st shift) | $21.45/hr (2nd shift) Shift Schedules: * 1st Shift: Monday–Friday | Start time between 5:00–6:00am * 2nd Shift: Monday–Friday | Start time between 2:00–3:00pm | Ends ~11:00pm Position Overview We are seeking reliable and detail-oriented Machine Operators to join our manufacturing team. In this role, you will be responsible for operating equipment, maintaining accurate production records, and supporting material handling tasks in a clean and safe work environment. This position requires the ability to lift up to 50 lbs, stand for extended periods (in 2-hour increments), perform repetitive motions, and follow all safety and PPE requirements. Candidates must also be able to safely operate machinery and use a pallet jack. Key Responsibilities * Operate manufacturing equipment according to procedures and specifications * Monitor and record equipment performance in operational logbooks * Assist technicians with troubleshooting and preventative maintenance * Handle, weigh, and verify raw materials and components * Maintain segregation of materials, lots, and receiving numbers * Perform manual and automated manufacturing tasks as assigned * Maintain clean, safe, and compliant work areas (GMP, safety, SOPs) * Complete accurate documentation and production records * Report unresolved issues to supervisor or management * Support housekeeping, stocking, and other daily lab responsibilities Physical Demands * Lift, move, and carry up to 50 lbs * Stand, walk, bend, and reach regularly; some sitting required * Exposure to mechanical equipment, vibration, moderate noise, and chemicals * Must wear required PPE (including safety shoes with impact/compression protection) Qualifications * High School Diploma or GED required * 0–2 years of related manufacturing or machine operation experience * Basic computer skills and ability to maintain accurate records * Familiarity with GMP, QSR, ISO, or laboratory procedures preferred * Strong attention to detail, time management, and willingness to learn * Bloodborne Pathogen training a plus This is a great opportunity for someone looking to gain hands-on manufacturing experience in a clean and regulated environment.

Job Description Medical Device Production Operators Join Our Team Looking for a hands-on role in a cleanroom environment, team-oriented environment where your work makes a real impact on patient health? We’re hiring Medical Device Production Operators to help manufacture and package life-saving diagnostic products. No two days are the same—you’ll rotate across tasks, learn new skills, and be part of a growing, mission-driven company. • Packaging Assemblers :Weigh, measure, and verify raw materials and components., • Operate pallet jacks (electric pallet jack experience a plus; forklifts not required)., • Assemble, fill, cap, bag, and label tubes, kits, and components., • Machine operators: Run and maintain basic lab and packaging equipment (balances, pipettes, conveyors, scanners, coders, etc.)., • Maintain accurate records, logs, and ERP transactions., • Keep your work area safe, clean, and organized in line with 6S standards and GMPs., • High School Diploma or GED required. RTR approval for submittal required., • Experience in manufacturing, packaging, or medical device/cleanroom GMPS Strong attention to detail and ability to follow written procedures., • Ability to lift up to 40 lbs regularly., • Comfortable with standing, walking, bending, and handling materials/tools., • Close vision and some color identification needed for product inspections. ✅ Meaningful work that supports global healthcare ✅ Training provided with room to grow ✅ Clean, safe, and team-oriented environment ✅ Possible Bonuses for work great performance Location: San Diego, CA 92121 | Shift: 1st and 2nd shifts | Pay Range: $18 - $19.50/hr Apply Today and take the next step in your career in medical device manufacturing! Email Resume and Contact Anne Marie Roberts 858-366-4104

Job Description Labor One is hiring Electrician Improvers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for assisting Journeyman/1st Class electricians with the installation, repair, and hook-up of equipment for electrical services on a ship. The individual must have work knowledge of electrical theory and procedures and the ability to troubleshoot and repair shipboard electrical systems and equipment (600 V and less) in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE Must possess the skill sets of subordinate grades of the labor class. Must be able to comprehend instructions, drawings, and general correspondence. Must be able to effectively confer job related information such as conditions found to the journeyman. Must understand Ohms law and its application. Must be able to read and interpret blueprints, electrical diagrams, computer printouts, specifications, and Navy standards manual. Understand appropriate sections of IEE, ABS, Coast Guard and manufacturer's tech manuals and ship's information book regarding electrical equipment. Must possess a thorough understanding of equipment and work processes used in marine electrical repair and system installation. Must be able to operate and care for Electric Shop equipment, portable power tools, and hand tools. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand US standard and metric system measurements. Must have three (3) years of related electrical installation and repair experience. DUTIES AND RESPONSIBILITIES Assist a journeyman/1st Class electrician wit completing assigned tasks successfully. Provide direction to a Helper/3rd Class electrician to help complete assigned tasks. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor or journeyman/1st Class electrician. Accountable for completion of daily work assignments. Must comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) Keep your work area clean and safe at all times, especially at the end of the shift. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. Work shifts and overtime as assigned. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. Carry out instructions furnished in written, oral, or diagram form. Confer with the Journeyman/1st Class electrician to resolve unexpected events related to your assigned task. Work Tasks Include: 1. Running cables, lines and leads, terminations/connector fabrication, packing of cable transits and harnessing cables aboard vessels., 2. Prepares work area, drills holes, grinds metal surfaces, inspect and reports on cableway and electrical equipment conditions., 3. Under direct supervision test internal circuits of major units of electrical equipment for continuity, short circuits, and grounds and measure electrical quantities and compare with established values., 4. Inspect mechanical and electrical connections including mounting bolts and screws; draw out disconnect devices and control wiring., 5. Detect and locate grounds, open circuits and short circuits in distribution generators and stems. Assist with the repair and maintenance of telephones, circuits, and associated equipment., 6. Assist with the installation of new power and lighting circuits., 7. Must be familiar with all safety procedures pertaining to electrical procedures or ask for safety information before working on electrical equipment., 8. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office condition to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. (x1) 1st Shift Needed (x2) 2nd Shift Needed Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionLabor One is hiring Journey-Level Marine Electricians for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for the installation, repair, and hook-up of equipment for electrical services on a ship. The individual must have working knowledge of electrical theory and procedures and the ability to troubleshoot and repair shipboard electrical systems and equipment (600 V and less) in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE Must possess the skill sets of subordinate grades of the labor class. DUTIES AND RESPONSIBILITIES -Must comply with OSHA standards and the shipyards best safety practices. --Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) -Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. -Keep your work area clean and safe at all times, especially at the end of the shift. -Understand relevant work processes, operation of equipment, and complete tasks proficiently. -Use appropriate sections of IEE, ABS, Coast Guard and manufacturer's tech manuals and ship's information book in repairing electrical equipment and installing electrical equipment. -Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. -Work shifts and overtime as assigned. -Comply with the Company's “Non-Discrimination and Anti-Harassment ---Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. -Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: 1. Running cables, lines and leads, terminations/connector fabrication, packing of cable transits and harnessing cables aboard vessels., 2. Prepares work area, drills holes, grinds metal surfaces, inspect and reports on cableway and electrical equipment conditions, tests and reports results on electrical equipment., 3. Test internal circuits of major units of electrical equipment for continuity, short circuits, and grounds and measure electrical quantities and compare with established values., 4. Inspect trip shafts, toggle linkages and all other mechanical parts to see that they operate freely without binding., 5. Inspect mechanical and electrical connections including mounting bolts and screws; draw out disconnect devices and control wiring., 6. Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment., 7. Install new power and lighting circuits., 8. Must be familiar with all safety procedures pertaining to or where to obtain electrical procedures. Must be very knowledgeable of work/safety procedures and manual., 9. Implement Lock-out Tag-out for work being performed. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. ---The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. -Appropriate --PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 2nd Shift 40 hours per week / OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

CRNA Opening - San Diego * San Diego! * • General Anesthesia, • Cases: No OB; focus on Orthopedics, Urology, General Surgery, Spinals, GYN, healthy pediatrics only, • CRNA under anesthesiologist supervision), • Prefer candidates with at least 1 year of experience, • Must already have CA license, • Must be Board Certified, • Medical Malpractice Provided - Including Tail, • Lucrative Compensation Admiral Healthcare Lucrative Opportunities on Your Terms! Created by Physicians for Physicians Admiral Healthcare specializes in helping Physicians and Advanced Practitioners find amazing opportunities on their terms. As Physicians ourselves, we understand the complexity of healthcare delivery from the ground up. We know exactly what healthcare providers look for when searching for an opportunity. However, we also realize that your priorities are unique and all opportunities are not the same. We work closely with you to find the best opportunity for you and your family. We have been in your shoes and we are here to help you every step of the way! Our goal is to simply find the best opportunities available that mesh with you and your lifestyle. We operate lean so you don't have to! Fahhad Farukhi, MD MBA MA Director of Operations Admiral Healthcare e:

Job Description A-Line Staffing is now hiring Operator 1, Warehouse Operations in San Diego, CA. The Operator 1 would be working for a Fortune 500 company and has career growth potential. This would be full-time / 40+ hours per week. If you are interested in this Operator 1 position, please contact Sawyer at Operator 1 Compensation • The pay for this position is $17.25 per hour, • Benefits are available to full-time employees after 90 days of employment, • This position is a contract assignment with potential to hire on permanently based upon attendance, performance, and business needs, • The required availability for this position is 1st shift: 7:00 a.m. to 3:45 p.m. (45-minute lunch), • Location: San Diego, CA 92154 (OTAY), • Manager is hiring off resumes; no interviews, • Move materials, parts, assemblies, and finished goods within a plant, office, or warehouse using equipment such as forklifts, conveyors, cranes, handcarts, and power trucks, • Maintain records as required, • Follow standard operating procedures and quality guidelines, • Apply basic knowledge and skills to complete routine tasks, • Operate in a metrics-driven environment and perform basic math calculations, • Must be able to lift 50 lbs. (with buddy system), • Steel-toed shoes required, • High School Diploma or GED OR 1 year of similar work experience, • 0–1 year of warehouse or related experience and/or training, • Ability to read, write, interpret, and comprehend documents in English, • Effective communication skills, • General computer skills, • Prior warehouse, logistics, or material handling experience

Summary You will serve as a PIPEFITTER LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Pipe Shop (Shop 56). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will serve as an Expert Pipefitter leading a group to ensure work assignments are completed.\n, • You will install, modify, fabricate, and repair new and existing shipboard system piping and equipment including low and high pressure air, water, and steam systems.\n, • You will mentor, train and instruct Pipe Shop employees in a wide range of pipefitting duties.\n, • You will inspect completed and in progress work for quality of workmanship and adherence to requirements, specifications, standards, plans, and schedules.\n, • You will perform maintenance, repairs, troubleshooting, installation, modification and testing in the shop and onboard ships.\n, • You will perform research to continually improve trade processes and keep shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position requires work in confined spaces.\n, • This position requires rotating shift work.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description Utility Locator (Field Technician) Starting pay $23.50! More than a Job! Stake Center Locating is hiring entry level Locate Technicians to locate underground utilities, troubleshoot, and mark the ground (using paint and flags), promoting damage prevention in your community. We will train you on the job and equip you with the basic skills to be successful in our 100% paid training. What you’ll need to bring is a preference to work outdoors in all weather, a desire to work independently and an ability to problem solve with speed and accuracy. What We Offer: Since 1997, we have been on a mission to make Stake Center a great place to work. We have been working with our locators to make Stake Center the company of choice. What we offer: • Pay Rate: $23.50 per hour., • We provide late-model vehicles with a fuel card that allows you to avoid high gas prices on your daily commute. In fact, you take the vehicle home every night (for company use only)!, • PTO and paid Holidays – best in class, • We are providing vouchers that can be used on 300+ types of Red Wing safety shoes (a total of $200 after every twelve months of service)., • 401(k) with company match Key Responsibilities: We will train entry level Locating Technicians to: • Think Safety First!, • Use a laptop computer to receive, document and process tickets and email., • Read maps, interpret blueprints, and determine the best method & sequence for locating., • Use provided locate equipment & technology to accurately locate underground utilities., • Communicate effectively with peers, managers, and homeowners. Qualifications: • Eighteen years of age or older., • High school diploma or equivalent., • Valid driver license with an acceptable driving record., • Ability to walk up to 5 miles a day 2-3 times a week., • Ability to carry up to 5 lbs of electronic locating equipment for extended periods of time; lifting objects up to 25 lbs or lifting in excess of 75 lbs with tool aids., • Pass pre-employment background and drug screening. Schedule: • Will need to have the ability to work a flexible schedule (some evenings, weekends, and an occasional Holiday) as ticket/production load requires., • Employees will respond to emergency calls during scheduled on-call shift rotation. We understand what is at stake for our employees, our customers, and our customers’ customers. That is why we continually invest in our people, equipment, and technology. To us you are a professional - this is a career not just a job!

Job Description • We are hiring immediately for a full time COOK position., • Location: Apple - 9520 Towne Center Drive, San Diego, CA 92121. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday, hours may vary. More details upon interview., • Requirement: 3 to 5 years of previous culinary experience is preferred., • Perks: Weekends off and holidays off! We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1440732. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Wolfgang Puck Catering is committed to recruiting individuals who express an interest in and passion for hospitality-driven experiences; who come from diverse backgrounds, are open-minded and curious about our clients and guests; and, most of all, who possess a welcoming smile and spirit. Our ultimate goal is to develop mentoring and career building opportunities through a talent pipeline that allows us to promote from within. "The most important thing in life, whatever you do, has to be passion." Wolfgang Puck Success on our team starts with our culture: • We have Wolfgang’s PASSION for our business, our product, and our people / guests / clients., • A FLEXIBLE MINDSET is key; we are strategic business partners who wear multiple hats., • Our services require a CONCIERGE mentality, a bias to action with humble hospitality., • We are out-of-the-box PROBLEM SOLVERS, who look around corners so our clients and guests don’t have to., • We curate company and partner resources to bring our client’s vision to life. We seek to cultivate the next generation of talent, purveyors and partnerships., • We bring an entrepreneurial approach to deliver results for our clients (you might call this scrappy)., • Collaboration and openness to innovative business tools, new ways of thinking and ability to partner across departments are essential to create optimal business solutions. “I can have the best food, but if we don’t have good people, it won’t get you very far.” Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. Associates at Wolfgang Puck Catering are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program Abides by all Company policies and procedures including but not limited to: * The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer. * The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. * The use of slip-resistant shoes and proper lifting techniques. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Wolfgang Puck Catering maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job Description • We are hiring immediately for a full time COOK position., • Location: Torrey Heights by Breakthrough Properties - 11220 El Camino Real Suite 150, San Diego, CA 92130. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday, 5:30 am to 1:30 pm. More details upon interview., • Requirement: 1 year of previous culinary and pastry experience is preferred., • Perks: No late nights, weekends off, holidays off, and willing to train! We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1450110. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Are you looking for a job with competitive wages and benefits, one in which you can learn and grow while making a difference in the world? We’re hiring! Bon Appétit Management Company operates more than 1,000 cafés around the country for corporations, universities, and museums, as well as a few dozen public restaurants. We’ve led the industry in socially and environmentally responsible sourcing, from sustainable seafood to cage-free eggs. We cook everything from scratch using fresh, local ingredients. Learn more about careers with Bon Appétit: Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Bon Appetit maintains a drug-free workplace. [[filter4]] We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job Description • We are hiring immediately for a full time COOK position., • Location: Avidity Biosciences - 3020 Callan Road, San Diego, CA 92121. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday, 7:00 am to 3:30 pm. More details upon interview., • Requirement: Previous cold prep and customer service experience is preferred., • Pay Range: $24.00 per hour to $26.00 per hour We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1436245. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. Req ID: 1436245 [[req_classification]] We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job Description • We have an opening for a full time COOK position., • Location: 16399 West Bernardo Drive, San Diego, CA 92127. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday, 11:00 am to 5:00 pm. More details upon interview., • Requirement: Previous pizza cooking or food service experience is required., • Pay Range: $22.00 per hour to $23.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1412002. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: This position is eligible for an Employee Referral Bonus! If you know someone that would be a great fit for this role, you can refer them to this position and potentially earn an Employee Referral Bonus! Click here to view the step-by-step instructions to refer a friend to this position. Become part of Restaurant Associates, the industry’s leading provider of dining and event catering for some of the nation's most prestigious museums, performing arts centers and corporations! Voted Glassdoor's Employee Choice Awards- Best Places to work This is R/A ! Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. Both full-time and part-time positions offer the following benefits to associates: • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Abides by all Company policies and procedures including but not limited to: • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job Description Chani's Donuts in San Diego, CA is looking for one fry cook to join our 10-person strong team. We are at 5250 Murphy Canyon Rd #118, San Diego, CA 92123. We are passionate about giving the world quality gluten-free, vegan, and top 10 allergen-free treats. Everyone deserves a treat. We work to embody a spirit of acceptance and welcoming to all abilities and accommodate wherever possible. If this fits your passions, keep reading. Our ideal candidate is self-driven, punctual, and engaged. This position will require availability on Saturdays. We cross-train for all positions, but this position is to become a donut specialist. Ability to follow directions, and report as soon as there is a problem Learn all there is to learn about the donut process and how to make the best mini-donuts possible. We have a family atmosphere and want to make our guests feel comfortable. Please review the dress code below. Responsibilities • Learn all there is to learn about the donut process including., • Set up equipment., • Takedown equipment., • Keeping equipment clean during operations., • Add donut batter to hopper over hot fryer., • Making mini donuts on site., • Clean up equipment., • Ensure prompt and accurate processing of food in your station., • Regular maintenance and cleaning of equipment and utensils used., • Maintain health and safety standards to regulations., • Knowledge of allergens, gluten, and related dietary restrictions., • Interpersonal Skills, • Friendly Outgoing, • Speak loudly and clearly to be heard over machinery., • Fryer experience is required., • Comfortable working with hot oil., • Food Handlers Permit (required)., • Selling and upselling skills., • Must be fluent in English., • Smile and greet customers with “Welcome to Chani’s Donuts”., • Self-starter look for things that need to be done and do them., • Ability to maintain composure and professionalism in a fast-paced environment., • Shirts must cover shoulders, 2” of upper arms, and 2” below your belt or pant line. Shirts must be in good condition, and have a finished seam on the sleeves, hemline, and collar (not ripped, thread-bare, or dirty)., • No logos or images on shirts other than Chani’s Donuts., • Pants (including shorts when allowed) must sit above hip bones and must be in good condition (not ripped, thread-bare, or dirty), • Shorts, if allowed, must be 2” longer than the tips of fingers on thighs and in good condition as noted above., • Facial piercings must be removed or covered., • Small earrings in the earlobe is acceptable., • Tattoos must be covered. Available shifts and compensation: Available shifts all days except Sundays. Compensation is $17.00 - $18.00/hour. By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description • We are hiring immediately for a full time and part time COOK position., • Location: San Diego City College - 1313 Park Boulevard, San Diego, CA 92101. Note: online applications accepted only., • Schedule: Full time and part time schedule. Monday through Friday, hours may vary. More details upon interview., • Requirement: Previous culinary experience is required. About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Maryland, Washington State, or to be performed Remotely, click here for information on additional company-provided time off benefits. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1451678 Canteen We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job DescriptionCook (Grill Master) Company & Culture For over 35 years El Pollo Loco continues to dominate the market in delivering the best citrus-marinated fire-grilled chicken. We opened our first restaurant in 1980 in Los Angeles, and today we are over 450 restaurants strong and still growing! From our products to our people, we're truly amazing! Our Crew Members are the heart and soul of our restaurants. Each and every one of our Crew Member careers plays a meaningful and critical role in the El Pollo Loco familia. What's in it for you! We offer eligible Employees the following Benefits/Perks: • Sick Pay up to 40 hours per year, • Opportunity for Advancement/Internal Promotions, • FREE shoes twice a year for zero accidents*, • Flexible Schedules, • Competitive Pay, • Employee Reviews once a year and merit increase when applicable, • Continues Training and Development Cook Job Summary: If you're interested in firing up the grills, we'll provide the hands-on training to help you succeed! This is a job you can take pride in and gain the grilling expertise which put El Pollo Loco on the map more than 30 years ago. Requirements: • Experience: No prior experience is required, but one or more years of restaurant cooking experience is preferred., • Education: High school diploma or equivalent (GED) is preferred., • Communication: Ability to speak and read English is preferred (second language is a plus). Ability to communicate effectively with external customers required., • Competencies: Kitchen, time-management, and customer service skills are preferred, • Food Handler Card: A food handler card required where applicable, • Physical Demands: The Cook regularly stands, talks, hears, uses close and distance vision, tastes or smells and repetitively uses their hands to reach/handle/feel/grasp objects. The position occasionally stoops/kneels/crouches/crawls and may lift objects up to 40 lbs. Job Details: • Work Hours: Full-Time or Part-Time hours available., • Career Advancement/Career Plan: We promote heavily from within, so from a Crew Member you can develop to become a Shift Leader, Assistant Manager, General Manager, and beyond!, • Work Attire: EPL logo'd shirt will be provided, black pants or jeans and no-slip shoes required

Job DescriptionDescription: Shift: 2nd Schedule: Monday - Friday, 2:00 PM - 10:30 PM SUMMARY The role of a Manufacturing Associate I is crucial in maintaining the efficiency and effectiveness of the production process. They actively participate in meeting production targets and deadlines, which is essential in ensuring that the company can accurately and timely deliver customer orders. ESSENTIAL JOB FUNCTIONS • Monitor machinery and equipment used in manufacturing, such as molded parts, to ensure products are made to specification., • Remove the parts from the machine manually., • Conduct visual inspections of the parts to check for pre-prescribed defects., • Document inventory and quality management production data, including quantities produced, defects identified, and materials used., • Correct certain defects, such as flash, using general tools based on engineering and quality feedback., • Assemble subcomponents of products, following detailed assembly instructions., • Package finished products for shipping, including labeling and preparing items according to customer orders., • Maintain a clean and safe work environment by adhering to safety protocols and cleaning schedules., • Participate in team meetings to discuss production goals and continuous improvement strategies and address concerns about the manufacturing process., • Available to cover for other associates during their lunch and break times. SUPERVISOR RESPONSIBILITIES This role is purely as an individual contributor. Requirements: QUALIFICATIONS To succeed in this job, an individual must satisfactorily perform each essential job function. The requirements below represent the required knowledge, skill, and ability. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EDUCATION and EXPERIENCE • A high school diploma or equivalent, e.g., vocational training, is required., • Familiarity with standard manufacturing practices and equipment preferred., • Experience in quality assurance (QA) and regulatory compliance preferred., • Experience in basic troubleshooting of manufacturing processes preferred., • Experience in the medical industries or molding businesses preferred. LANGUAGE REQUIREMENTS • Excellent verbal and written communication skills in English., • Conversational in any other language preferred. MATHEMATICAL SKILLS • Basic arithmetic: add, subtract, multiply, and divide whole numbers. JOB SKILLS • Familiar with Microsoft Office tools and SharePoint basics, eager to learn and expand proficiency., • Basic knowledge of Continuous Improvement, Lean Manufacturing, and the 5S Methodology., • Able to identify process deviations and product defects., • Able to effectively allocate resources to ensure timely product delivery that meets the required specifications., • Ability to set up, operate, and maintain equipment to ensure output meets established quality standards., • Dependable and willing to work overtime when necessary. PHYSICAL DEMANDS The employee will regularly engage in activities such as using hands to finger, handle, or feel and communicating verbally. Additionally, the employee will frequently need to reach with hands and arms while standing and walking as part of the role. Occasional lifting and movement of objects weighing up to fifty (50) pounds may be required. This position also demands specific vision capabilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions. WORK ENVIRONMENT A work environment in a plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Providien Thermoforming is dedicated to identifying and reducing the environmental impact of its operations, activities, and products. We are committed to complying with all applicable laws and other environmental regulatory requirements. We are also committed to preventing pollution and improving our environmental performance in all our global operations. This will be achieved through a comprehensive Environmental Management System that provides the framework for setting and reviewing Providien Thermoforming’s environmental objectives and targets. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS • ASTM F–2412–2005, ANSI Z41–1999, or ANSI Z41–1991 rated safety toe shoes in specific areas., • Clear ANSI Z87.1 safety-rated glasses in specific areas., • Hearing protection in specific locations., • Ability to compile with JSA in specific areas. TRAVEL Travel is not required for this position. SALARY INFORMATION According to several states' laws, this position's salary range falls between $17.25 and $19.25 hourly/annually. However, this salary information is merely a general guideline. When extending an offer, Providien Thermoforming considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations.

Job Description Labor One is hiring Journey-Level Carpenters for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:To perform this job an individual must be able to understand the full scope of work of any assigned job and successfully complete the required tasks with minimal supervision. Tasks include constructing, installing, repairing, and fabricating structures (primarily wood) to protect ship's equipment, outfitting the drydock with docking blocks, and outfitting ships in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. High school degree or equivalent (GED), or vocational school degree. Must have six (6) years of related experience. QUALIFICATIONS, DUTIES, AND RESPONSIBILITIES -Must possess the skill sets of subordinate grades of the labor class. -Must be able to interpret and work from drawings, job specifications, instruction manuals, manufacturer's handbooks, change orders, and contract specifications. -Must possess a thorough understanding of equipment and work processes used in marine carpentry, joiner, and drydock blocking operations. -Must be able to operate and care for Carpenter Shop equipment, portable power tools, and hand tools. Layout, cut, and fabricate products from blueprints, owner specifications, and sketches. -Must be able to work with US standard and metric measurements and be able to add, subtract, multiply and divide. -Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. -Carry out instructions furnished in written, oral, or diagram form. Deal with unexpected events related to your assigned task in a professional manner. -Accountable for completion of daily work assignments including the completion and signatures to work completion and quality. -Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. -Must comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) -Keep the work area clean and safe at all times, especially at the end of the shift. -Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. COMMUNICATION SKILLS The candidate must be able to read and comprehend basic instructions, short correspondence, and memos to the extent necessary to accomplish the work requirements. Must be able to interpret specifications and drawings and possess the ability to write comprehensive Condition Found Reports (CFR) describing the problem found, and corrective action required. Must be able to communicate hazardous conditions to other employees. WORK ENVIRONMENT -The work environment described are representative of those an employee will encounter while performing the essential functions of this job. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished from mechanical lifts. -The working environment in the shipyard varies from a normal office environment to outside weather conditions of precipitation, wind, extreme cold, and extreme heat and high humidity. When working inside of vessels the environment may be smoky, hot or cold, and low levels of illumination may be present. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionLabor One is hiring Journey-Level Riggers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must possess experience in the trade; knowledge of ship terminology, blueprint reading, job specifications and manuals. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. -Technically proficient in tasks, work processes, and equipment operation. -Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. -Creates a working environment for compliant with quality, safety, environmental, and health regulations and policies. -Thorough knowledge of equipment used in rigging operations, included but not limited to lifting and moving equipment. -Knowledge of rigging testing requirements, proper set up and operation of equipment. -Selects cables, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved. -Attaches pulley and blocks to fixed overhead structures such as beams and ceilings with bolts and clamps. -Attaches load with lifting devices such as wires, nylon straps and chains to crane hook. -Gives directions to crane operator engaged in hoisting and moving loads to ensure safety of workers and material handled. -Sets up cranes hoisting equipment. Safe handling of anchors and chains. Lowers, handles and tests lifeboats. -Tests ships cranes using various rigging. Ability to interpret all crane load charts and blueprints. -Ability to work any assigned shift and ability to work assigned overtime. May be assigned tasks outside craft as required. -Must comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be business like and free of bias, prejudice, and harassment EDUCATION and/or EXPERIENCE Must complete practical demonstration of skills listed above. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations before customers, clients, or employees of organization. MATHEMATICAL SKILLS The ability to add, subtract, multiply, and divide all units of measure, whole numbers, common fractions, and decimals in U.S. and metric conversions. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems that may arise in certain situations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. Specific requirements include the following: 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Demonstrate the ability to bend, squat crouch, crawl and kneel., 4. Demonstrate the ability to climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Perform prolonged standing (2-3 hours)., 6. Able to work at a variety of levels (ex. Waist, eye, above head)., 7. Demonstrate the ability to safely and appropriately use required tools and equipment., 8. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles., 9. Posses sufficient handgrip and coordination to carry and operate tools and equipment., 10. Ability to utilize personal protective equipment (hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards., 11. Ability to withstand extreme temperatures (cold and hot)., 12. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 13. Able to respond to verbal and audible sounds/commands., 14. Able to utilize adequate visual skills., 15. Ability to work at heights above 12' while working from ladders, scaffolding and/or manlifts., 16. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 17. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 18. Ability to turn head from side to side and about on the vertical axis., 18. Ability to turn body at the waist from side to side and about the vertical axis. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the environment varies from normal office environment to wet and/or humid conditions, outside weather conditions, extreme cold, and extreme heat. The employee is occasionally exposed to moving mechanical parts and high places. The noise level in the shipyard environment is usually loud; office environment is usually low to moderate. The wearing of appropriate personal protective equipment mitigates risks associated with these conditions and is mandatory. 1st Shift 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionLabor One is hiring Journey-Level Riggers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631 (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must possess experience in the trade; knowledge of ship terminology, blueprint reading, job specifications and manuals. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Technically proficient in tasks, work processes, and equipment operation. Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. Creates a working environment for compliant with quality, safety, environmental, and health regulations and policies. Thorough knowledge of equipment used in rigging operations, included but not limited to lifting and moving equipment. Knowledge of rigging testing requirements, proper set up and operation of equipment. Selects cables, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved. Attaches pulley and blocks to fixed overhead structures such as beams and ceilings with bolts and clamps. Attaches load with lifting devices such as wires, nylon straps and chains to crane hook. Gives directions to crane operator engaged in hoisting and moving loads to ensure safety of workers and material handled. Sets up cranes hoisting equipment. Safe handling of anchors and chains. Lowers, handles and tests lifeboats. Tests ships cranes using various rigging. Ability to interpret all crane load charts and blueprints. Ability to work any assigned shift and ability to work assigned overtime. May be assigned tasks outside craft as required. Must comply with the Company's Non-Discrimination and Anti-Harassment Policy which expects that all relationships among persons in the workplace will be business like and free of bias, prejudice, and harassment EDUCATION and/or EXPERIENCE Must complete practical demonstration of skills listed above. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations before customers, clients, or employees of organization. MATHEMATICAL SKILLS The ability to add, subtract, multiply, and divide all units of measure, whole numbers, common fractions, and decimals in U.S. and metric conversions. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems that may arise in certain situations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. Specific requirements include the following: 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Demonstrate the ability to bend, squat crouch, crawl and kneel., 4. Demonstrate the ability to climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Perform prolonged standing (2-3 hours)., 6. Able to work at a variety of levels (ex. Waist, eye, above head)., 7. Demonstrate the ability to safely and appropriately use required tools and equipment., 8. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles., 9. Posses sufficient handgrip and coordination to carry and operate tools and equipment., 10. Ability to utilize personal protective equipment (hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards., 11. Ability to withstand extreme temperatures (cold and hot)., 12. Ability to enter 18 x 36 openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 13. Able to respond to verbal and audible sounds/commands., 14. Able to utilize adequate visual skills., 15. Ability to work at heights above 12 while working from ladders, scaffolding and/or manlifts., 16. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 17. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 18. Ability to turn head from side to side and about on the vertical axis., 18. Ability to turn body at the waist from side to side and about the vertical axis. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the environment varies from normal office environment to wet and/or humid conditions, outside weather conditions, extreme cold, and extreme heat. The employee is occasionally exposed to moving mechanical parts and high places. The noise level in the shipyard environment is usually loud; office environment is usually low to moderate. The wearing of appropriate personal protective equipment mitigates risks associated with these conditions and is mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionLabor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and BAE best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer’s tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company’s “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12’ from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 40 hours per week

Job Description Labor One is hiring Journey-Level Outside Machinists for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to work from Process Control Procedures (PCP)., 6. Must be able to use precision measurement tools., 7. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 8. Must be able to interpret drawings, sketches, tech manuals, and user manuals to the extent necessary to remove, repair, and install equipment., 9. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 10. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 11. Must understand laser alignment., 12. Must understand reverse indicator alignment procedures., 13. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 15. Six (6) years of machinist experience, two (2) of which in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor. 3. Work shifts and overtime as assigned., 3. Keep the work area clean and safe at all times, especially at the end of the shift., 4. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st shift 40 hours per week/OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Firewatch for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for fire prevention and fire protection at the assigned work site. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence., 2. Be able to clearly communicate verbally to warn others of fire or other danger., 3. Understand the hazards associated with fixed and portable fire protection systems and the manner in which the systems are activated., 4. Understanding of proper use and care of fixed and portable fire protection systems., 5. Understand the Shipyard Competent Person Report, and where to find it., 6. Know the types of fire, the materials involved, and the type of fire extinguisher needed to suppress the fire., 7. Possess a Fire Watch training card., 8. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES 1. Have Fire Watch Training card with them at all times in the shipyard., 2. Carry out Fire Watch procedures to protect personnel and customer and BAE property from fire damage., 3. Ensure that designated hot work area is clean and free of combustible materials before hot work commences., 4. Keep your work area clean and safe at all times, especially at the end of the shift., 5. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication., 6. Show initiative and ownership of work and work area., 7. Adhere to all safety rules and good work ethics. Be accountable for completion of work assignments., 8. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or journeyman., 9. Work shifts and overtime as assigned the supervisor., 10. Comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 11. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. Work Tasks Include: a) Ensure that designated hot work area is clean and free of combustible materials before hot work is started. b) Carry an appropriately rated fire extinguisher to the assigned watch area. Make certain the fire extinguisher is in operable shape and not discharged prior to allowing hot work to start. c) Notify the person accomplishing the hot work if it is safe to proceed and when there is danger. d) Suppress fires when they occur. e) Report any uncorrected unsafe condition or working habits to the journeyman and supervisor. f) Assist with the hot work procedure and audits process making certain hot work notifications are in place and valid before hot work commences. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours per week; Overtime with supervisor approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. Repair and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must have a comprehensive knowledge of Silver Brazing theory., 8. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 9. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 10. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 11. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 12. Must have six (6) years of pipefitting experience, four (3) of which in the maritime repair environment. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipefitter Improver and Helper if assigned., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and shipyard's best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work. b. Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases. c. Inspect work for defects before turning the job over to welders. Correct fit-ups as required.. Confer with supervision before correcting deficiencies. d. Document existing conditions before commencing work using Condition Found Reports (CFR). e. Remove damaged pipe in accordance with drawings and specifications. f. Measure or template pipe for fabrication. g. Blank systems in accordance with standard Item 009-24 or other applicable safety standards. h. Fit up new pipe using the proper fit up type in accordance with specifications. i. Ensure a strain free fit-up to pumps or other connecting equipment. j. Blank tanks and accomplish boundary air tests. k. Accomplish or verify Lock-out Tag-out requirements before commencing. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 75 lbs on an occasional basis (0-25% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (25-75% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description About Indigenous Pact PBC, Inc: Established in 2017 Indigenous Pact PBC, Inc., a certified B-Corporation, set out on a mission to create health equity for American Indians and Alaskan Natives. As part of a global movement of certified B-Corporations, we aim to balance purpose and profit by meeting the highest social, environmental, legal, and public standards to build a more sustainable and inclusive economy. Indigenous Pact's dedicated, experienced, and knowledgeable team brings decades of experience working in Indian Country. We help strengthen and improve the sustainability of Tribes and Tribal Organizations' health, wellness, and long-term care programs and services. Indigenous Pact specializes in developing customized and turn-key solutions to generate sustainable revenue, increase healthcare access, and improve health outcomes for all Native Americans. Job Description • Job Title: Database Architect, • Base Salary: $57.00 - 67.00/per hour, • Location: USA, Remote, • Work model: 3-month Contract, • Travel Requirements: up to 10% As a Database Architect, you will play a critical role in leading the design and implementation of Indigenous Pact's enterprise data architecture and modern Azure Data Lake environment. You will architect solutions that enable secure, scalable, and high-performing data integration, warehousing, governance, and analytics across healthcare and Tribal systems. Your work will shape the foundation of our cloud-based data infrastructure—ensuring it meets performance, compliance (HIPAA), and business intelligence needs. This position is central to our long-term data strategy and modernization roadmap. Essential Job Functions: • Lead architecture of Indigenous Pact's Azure Data Lake Storage Gen2, including partitioning strategy and data zone design (raw, refined, curated, sandbox)., • Define data ingestion, transformation, and storage patterns, and other efficient data formats., • Develop and enforce data modeling standards, naming conventions, and metadata management strategies., • Collaborate with cross-functional stakeholders to identify, prioritize, and classify data entities for inclusion in the data lake., • Analyze existing data sources, APIs, and reporting tools to map data lineage, quality issues, and integration patterns., • Design scalable Azure Data Factory (ADF) pipelines, CDC strategies, and scheduling/orchestration workflows., • Define and document technical architecture, ETL specifications, capacity plans, and network/data security requirements., • Establish governance frameworks including data stewardship models, privacy and compliance controls (HIPAA, CCPA), and data quality standards., • Develop and manage strategies for data lifecycle, archiving, disaster recovery, and performance optimization., • Guide implementation of data dictionaries, business glossaries, and audit/compliance tracking systems., • Participate in stakeholder validation sessions, technical feasibility reviews, and trial data loads. Required Skills/Abilities: • Strong expertise in Microsoft Azure cloud data services: Azure Data Lake Storage Gen2, Azure Synapse, Azure SQL, Azure Data Factory., • Experience designing data lake architectures, data zones, and cloud-native ETL pipelines., • Proficiency in data modeling, schema design, and governance standards (e.g., master data, metadata)., • Familiarity with compliance frameworks (HIPAA, CCPA) and best practices in data security and auditing., • Ability to analyze complex integration scenarios, APIs, and legacy data structures., • Excellent written documentation and verbal communication skills for stakeholder engagement., • Scripting proficiency using PowerShell, Python, or similar automation tools., • Bachelor's degree in Computer Science, Information Systems, or a related field (or equivalent experience)., • 7+ years of progressive experience in data architecture or enterprise database design., • Hands-on experience with large-scale data environments and healthcare data preferred., • This position involves extended periods of computer-based work., • Remote position with core hours of 9:00 AM to 5:00 PM CST (flexible for time zones)., • You have a Growth Mindset: A belief that abilities can be developed along with a desire to be curious, learn & grow, • You take Initiative: Solve problems by thinking & taking action on solutions rather than waiting for direction, • You take Accountability: Follow through on commitments, take ownership & ensure timeliness, • You Give Back: Leverage your knowledge & expertise to make improvements around you, • You are Resilient: Work through challenges with optimism, agility & adaptability Building a strong culture and exhibiting our core values is important to us. When you join Indigenous Pact, you are joining a team that values: • Empathy is at the heart of everything we do—we listen, we understand, and we put ourselves in the shoes of others, whether it's our teammates, our clients, or the communities we serve., • Wisdom is about learning from experience, being thoughtful in our work and making decisions that are grounded in knowledge and insight. It's about taking the time to get things right., • Bravery is having the courage to take bold risks, challenging the status quo, and knowing that growth happens when we push our limits. Beyond the job opportunity and incredible culture we also offer: • A competitive total rewards package, including 401(k), Medical, Dental, and Vision insurance, • Open, transparent lines of communication with leadership, • Committed to giving back to improve our communities and environmental impact

Job Description About Indigenous Pact PBC, Inc: Established in 2017 Indigenous Pact PBC, Inc., a certified B-Corporation, set out on a mission to create health equity for American Indians and Alaskan Natives. As part of a global movement of certified B-Corporations, we aim to balance purpose and profit by meeting the highest social, environmental, legal, and public standards to build a more sustainable and inclusive economy. Indigenous Pact's dedicated, experienced, and knowledgeable team brings decades of experience working in Indian Country. We help strengthen and improve the sustainability of Tribes and Tribal Organizations' health, wellness, and long-term care programs and services. Indigenous Pact specializes in developing customized and turn-key solutions to generate sustainable revenue, increase healthcare access, and improve health outcomes for all Native Americans. Job Description • Job Title: Database Administrator (Azure), • Base Salary: $110,000 based on skillset, experience and location, • Location: USA, • Work model: Remote, USA, • Travel Requirements: up to 10% As a Database Administrator, you will support the design, migration, and management of cloud-based database solutions to support Indigenous Pact's growing data infrastructure. This role is essential in transitioning from a third-party Azure-hosted database environment to an internally managed Azure ecosystem. You will be responsible for the performance, integrity, security, and availability of critical data systems while collaborating closely with developers, analysts, and IT leadership. This individual will ensure the organization's data environments are stable, optimized, and aligned with industry best practices in security and compliance, particularly within the context of healthcare and Tribal community data systems. Essential Job Functions: • Lead and execute the migration of database systems from a third-party Azure-hosted solution to an internally managed Azure SQL environment, • Design, implement and maintain secure, scalable, and high-performing database systems within the Azure cloud platform, • Monitor database performance, conduct tuning and optimization and address bottlenecks proactively, • Develop and manage backup and disaster recovery strategies to ensure business continuity, • Implement and maintain database security protocols, user access controls, and compliance requirements (e.g., HIPPA), • Collaborate with software development teams to support application data needs and ensure database efficiency, • Create and maintain documentation for database systems, configurations, and procedures, • Participate in database capacity planning and forecasting for long-term scalability, • Support data warehousing, ETL pipelines, and analytics tools such as Azure Databricks to ensure timely data processing Required Skills/Abilities: • Proficiency with Microsoft Azure database services, including Azure SQL Database and Azure SQL Managed Instance, • Strong knowledge of SQL Server Administration, performance tuning, indexing strategies and T-SQL scripting, • Familiarity with database security best practices and compliance standards, healthcare preferred (E.g., HIPAA), • Ability to troubleshoot and resolve complex database issues quickly and effectively, • Scripting experience using tools such as PowerShell or Python for automation, • Proven ability to collaborate with cross-functional technical and non-technical teams, • Bachelor's degree in Computer Science, Information Systems, or a related field required; equivalent work experience considered, • 5-7 years of professional experience as a Database Administrator, with a focus on Azure-hosted environments, • Experience supporting large-scale database systems and critical infrastructure, • Hands-on experience with data warehousing concepts and ETL pipeline design and troubleshooting, • This position will require extended periods of sitting, typing, and working on a computer screen., • This is a remote position, with expected working hours of 9:00am to 5:00pm. Adjustment of working hours may be required to accommodate time zones. Building a strong culture and exhibiting our core values is important to us. When you join Indigenous Pact, you are joining a team that values: • Empathy is at the heart of everything we do—we listen, we understand, and we put ourselves in the shoes of others, whether it is our teammates, our clients, or the communities we serve., • Wisdom is about learning from experience, being thoughtful in our work and making decisions that are grounded in knowledge and insight. It is about taking the time to get things right., • Bravery is having the courage to take bold risks, challenging the status quo, and knowing that growth happens when we push our limits. Beyond the job opportunity and incredible culture, we also offer: • A competitive total rewards package, including 401(k), Medical, Dental, and Vision insurance, • Open, transparent lines of communication with leadership, • Committed to giving back to improve our communities and environmental impact

Job Description Job Description: QED Systems, Inc., a ship repair company, has an opening for a Marine Welder/Brazier. The individual will report directly to the Project Supervisor who is leading a team of tradesmen installing Ship Alterations on U.S Navy ships. Job Requirements/skill sets: • Minimum of 5 years of shipyard Welding or Brazing experience., • The candidate must have a current or prior NAVSEA, ABS, or AWS certification in at least two welding processes (SMAW, FCAW, GMAW, or GTAW) and two base metals (OSS, HY, SS, AL, or CuNi)., • The candidate must pass a welding practical test and workmanship written exam which will be administered prior to hire., • The candidate must be able to interpret NAVSEA technical drawings and understand welding symbols on drawings., • Must be able to carry heavy equipment up to 50 pounds, such as welding machines, gas bottles, and fire extinguishers., • Must have experience using hand tools, power tools, and shop machinery., • Experience with a plasma cutter is a plus., • Must be able to work aboard ships and under industrial repair conditions, work in confined spaces, climb vertical & inclined ladders, and follow safety regulations., • Will be required to wear personal protective equipment (PPE), such as eye protection, hard hat, hearing protection, and safety shoes., • Must provide own set of welder’s personal protective equipment (PPE). Security Clearance/Naval Facility Access: U.S. citizenship required. Must be able to access military facilities, naval shipyards, and private shipyards. Must have a government issued ID card (such as a REAL ID or a U.S. passport or passport card). Q.E.D. offers competitive benefits such as: Paid Leave, Medical, Dental, Vision, Short/Long Term Disability, 401(k) retirement plan, Basic Life Insurance, supplemental insurance, and Employee Assistance Program. EOE, including disability/vets: QED is an equal opportunity employer.

Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description Labor One is hiring Outside Machinist Improvers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have basic print (drawing) reading and interpretation skills., 3. Must have a working understanding of ship repair terminology and ship compartment location nomenclature., 4. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 5. Must be able to write reports describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 6. Must be able to work from Process Control Procedures (PCP)., 7. Must be able to use precision measurement tools., 8. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 9. Must have a basic understanding of drawings, sketches, tech manuals, and user manuals., 10. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 11. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 12. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 13. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 14. Three (3) years of machinist experience, preferably one (1) of which is in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Keep the work area clean and safe at all times, especially at the end of the shift., 5. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 6. Assist with the preparation of Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 8. Receive technical guidance and carry out directions from a Journeyman or Supervisor., 9. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: a. Prepare a safe work area especially as it relates to fire prevention. b. Assist in the coordinate work with other crafts to disconnect and remove equipment. c. Compile as-found reports identifying the status of equipment prior to work. d. Assist with in-place valve repairs. e. Assist with material take offs with adequate information for ordering. f. Assist with equipment alignment. g. Assist with operational tests. h. Keep blanking logs up to date. i. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. j. Assist with Lock-out Tag-out activities for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours a week. Overtime with Supervisors approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 9. Carry out written or oral instructions. Confer with the supervisor to resolve unexpected events related to your assigned task. Work Tasks Include: a. Prepare work area for hot work, including checking hot work certifications at the work site and adjacent areas. b. Prepare surfaces for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions. e. Become familiar with applicable safety requirements before commencing work. f. Ensure Lock-out Tag-out has been correctly accomplished. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day). 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day). 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps). 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles. 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day). 9. Respond to visual, verbal, and audible sounds/commands. 10. Work at heights above 12' from ladders, scaffolding, and manlifts. 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 Hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionSalary: DOE APS Receiving Inspection Clerk / Parts Runner Job Description ESSENTIAL JOB FUNCTIONS: * The duties of the Receiving Inspection Clerk / Parts Runner are inclusive but not limited to: * Receiving and inspection of incoming parts and equipment to determine if there are nonconforming conditions (broken /defective) * Identifying accuracy of parts received through inspection of the item, verifying the item received is what was ordered through comparison of the packing slip and purchasing document. * Completing the Receiving and Inspection form to document the above received and inspected disposition of material, parts and equipment. * Creating labels to be adhered to the received items with information taken from purchase documents and staging items on the applicable designated job shelf. * Conduct pickup and delivery of parts identified during the workday to support the production effort. REQUIRED CERTIFICATIONS: • Valid drivers license with clean driving record., • High school diploma or general education degree equivalent., • 1-2 years of related experience and/or training., • Ability to navigate surrounding areas through use of GPS. While performing the duties of this job, the employee is frequently exposed to near moving mechanical parts and outdoor weather conditions. The noise level in the work environment is that of an office environment. When traversing through the boatyard, the employee shall wear closed toe shoes, safety glasses and hearing protection.

Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will pass on instructions to members of the work group.\n, • You will check and report work progress of the group.\n, • You will perform work site inspections.\n, • You will receive job or work assignments from welding supervisor.\n, • You will check and report work progress of the group including written documentation and shift assist requests.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description Labor One is hiring Insulator Helpers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing the installation and removal of insulation of any component onboard ships. A Helper works under the guidance of an Improver, Journeyman, and Supervisor to measure, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Work is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a basic knowledge of procedures and the insulation craft, and the drive to accomplish quality work and learn. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a basic understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write a report for the supervisor or journeyman describing the material condition of the ship as it pertains to the assigned work item., 5. Must be able to effectively confer job related information to the improver, journeyman, and supervisor., 6. Must have experience using hand and power tools associated with the trade in a safe manner., 7. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Two (2) years of related experience, some of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keep the work area clean and safe at all times, especially at the end of the shift., 5. Must follow the direction provided by the supervisor, improver, and journeyman., 6. Complete daily work assignments and provide status of unfinished work., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Assist with providing Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Carry out instructions furnished in written, oral, or diagram form. Work with the supervisor, journeyman, and Improver to resolve, in a professional manner, unexpected events related to your assigned task. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 4. Work at a variety of levels and positions (ex. Waist, eye, above head)., 5. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift 40 hours a week; overtime with supervisors approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Laborers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for supporting mechanics in the accomplishing of production tasks, including the use of small mechanical and hand tools. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence., 2. Be able to clearly communicate verbally to warn others of fire or other danger., 3. Possess the skills required of a Fire Watch., 4. Have experience using small power tools and hand tools in a production environment., 5. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES 1. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or mechanic., 2. Work shifts and overtime as assigned the supervisor., 3. Comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 5. If assigned as a fire watch, carry out the duties of a fire watch as delineated in the Fire Watch Labor Category including having a fire watch training card at the work site at all times., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. work under the guidance of the Crane Operator and Tender. 1st Shift 40 Hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Insulators for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, the installation and removal of insulation of any component onboard ships. A journeyman measures, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Wok is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, comprehensive knowledge of the insulation craft and the drive to accomplish quality work on schedule. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the supervisor, improvers, and helper., 6. Must have experience applying hullboard, Armaflex, Cal-sil, ventilation insulation, and insulation pads., 7. Must have experience fabricating insulation pads., 8. Must have experience using hand and power tools associated with the trade in a safe manner., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 10. Must possess a basic understanding of the metric system., 11. Six (6) years of related experience, three (3) of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Provide guidance to Improvers and Helpers., 9. Provide Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 10. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 11. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Summary You will serve as a MARINE MACHINERY MECHANIC LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will apply a variety of methods, procedures, and techniques to layout, install, align, overhaul, repair, and maintain numerous types of marine machinery, equipment, and systems.\n, • You will utilize and apply standard formulas, shop mathematics, trade theories, and industry practices in calculating needed materials and problem solving.\n, • You will utilize various test equipment and measuring devices such as alignment scopes, verniers, micrometers, precision levels, transits, strobe tachometers, bearing bridge gauges, flow meters, hydrostatic testers, and vibration analyzers.\n, • You will set up and operate machine tools such as small lathes, milling machines, drill presses, and precision grinders to manufacture component parts or remachine existing parts such as bushings, bearings, seals, couplings, and pistons.\n, • You will utilize machine tools for onsite milling, grinding, boring, facing, and drilling, and the use of various other portable machine tools to accomplish repairs.\n, • You will disassemble, repair, and rebuild components and assemblies such as shafts, propellers, rudders, engines, and sea valves.\n, • You will operate machinery and equipment for launching and arresting gear systems, missile handling and launch systems, torpedo tubes, periscopes, antennas, sonar, and radar equipment, and shipboard equipment.\n, • You will interpret and apply the requirements contained in technical manuals, shop directives, multiview blueprints, and other documents in determining critical dimensions and key reference points.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description Overview SP+ is driven by Our Promise, “Making Every Moment Matter for a World on the Go.” Our team understands that time is scarce, so we are intentional about putting ourselves in the shoes of those we serve. The result is a unique combination of talented people and industry-leading technology that enables SP+ to prioritize each and every moment, recognizing that the time colleagues, clients and customers invest in us must always matter. This position is responsible for thorough inspections and quality repairs and maintenance to ensure that only safe and reliable vehicles are deployed in revenue service at the project. Responsibilities • Maintain all vehicles to ensure safety, reliability, and passenger comfort in accordance with contractual requirements and SP+ Fleet Services standards., • Perform quality maintenance inspections and repairs on all assigned vehicles and equipment., • Perform all maintenance duties in a safe and efficient cost-effective manner., • Maintain technical competency on assigned equipment and vehicles and actively engage in ongoing training and development programs offered by the company. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: High School Degree or equivalent required. Graduation from approved program at technical school a plus. Prior experience as a Mechanic or Vehicle Maintenance Technician and/or prior experience with heavy fleet vehicles preferred. Certifications: Possess or willing to obtain all applicable ASE certifications. License Requirement: Must possess a valid state-issued driver’s license with a current address and acceptable driving record. DOT Medical Card: A Medical Examiner’s Certificate (DOT Medical Card) is required. Hand Tools: Must have all necessary hand tools to perform maintenance duties. Availability to Work: Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. Minimum Age Requirement: Must be 21 years of age or older Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one situations to customers and other employees of the company. Mathematical Skills: Ability to add, subtract, two digit numbers and multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money. Appearance: Employees will be required to maintain a neat and clean appearance and be in complete uniform at all times. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 100 pounds. Salary Range: $23.00 - $34.00 per hour Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights.

Job Description This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES, 16. Must comply with OSHA standards and BAE best safety practices., 17. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 18. Work shifts and overtime as assigned., 19. Keeping the work area clean and safe at all times, especially at the end of the shift., 20. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 21. Complete daily work assignments and provide status of unfinished work for shift turnover., 22. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer’s tech manuals., 23. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 24. Comply with the Company’s “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12’ from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 Hours a week / OT with approval

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift Only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Cashier Company & Culture For over 35 years El Pollo Loco continues to dominate the market in delivering the best citrus-marinated fire-grilled chicken. We opened our first restaurant in 1980 in Los Angeles, and today we are over 450 restaurants strong and still growing! From our products to our people, we're truly amazing! Our Crew Members are the heart and soul of our restaurants. Each and every one of our Crew Member careers plays a meaningful and critical role in the El Pollo Loco familia. What's in it for you! We offer eligible Employees the following Benefits/Perks: • Sick Pay up to 40 hours per year, • Opportunity for Advancement/Internal Promotions, • FREE shoes twice a year for zero accidents*, • Flexible Schedules, • Competitive Pay, • Employee Reviews once a year and merit increase when applicable, • Continues Training and Development Cashier Job Summary: As a Cashier you will provide friendly and courteous service by greeting each guest with a smile and making them feel welcome. You may be asked to run the drive- thru station and work with a team to deliver fast and efficient service. Either way, your job will be to ensure great guest service 100% of the time! Requirements: • Experience: No experience is required, however one or more years of experience in restaurant or customer service position is preferred, • Education: No education is required, however a High School Diploma or equivalent (GED) is preferred., • Communication: Ability to speak and read English is required (second language a plus). Ability to speak effectively with external customers is required., • Competencies: Customer service skills, and experience entering orders into a Point-Of-Sales (POS) system is preferred, • Food Handler Card: A food handler card required where applicable Job Details: • Work Hours: Full-Time and Part-Time hours are available, • Career Advancement/Career Plan: We promote heavily from within, so from a Crew Member you can develop to become a Shift Leader, Assistant Manager, General Manager, and beyond!, • Work Attire: EPL logo'd shirt will be provided, black pants or jeans and no-slip shoes required

Job Description Cashier Company & Culture For over 35 years El Pollo Loco continues to dominate the market in delivering the best citrus-marinated fire-grilled chicken. We opened our first restaurant in 1980 in Los Angeles, and today we are over 450 restaurants strong and still growing! From our products to our people, we're truly amazing! Our Crew Members are the heart and soul of our restaurants. Each and every one of our Crew Member careers plays a meaningful and critical role in the El Pollo Loco familia. What's in it for you! We offer eligible Employees the following Benefits/Perks: • Sick Pay up to 40 hours per year, • Opportunity for Advancement/Internal Promotions, • FREE shoes twice a year for zero accidents*, • Flexible Schedules, • Competitive Pay, • Employee Reviews once a year and merit increase when applicable, • Continues Training and Development Cashier Job Summary: As a Cashier you will provide friendly and courteous service by greeting each guest with a smile and making them feel welcome. You may be asked to run the drive- thru station and work with a team to deliver fast and efficient service. Either way, your job will be to ensure great guest service 100% of the time! Requirements: • Experience: No experience is required, however one or more years of experience in restaurant or customer service position is preferred, • Education: No education is required, however a High School Diploma or equivalent (GED) is preferred., • Communication: Ability to speak and read English is required (second language a plus). Ability to speak effectively with external customers is required., • Competencies: Customer service skills, and experience entering orders into a Point-Of-Sales (POS) system is preferred, • Food Handler Card: A food handler card required where applicable Job Details: • Work Hours: Full-Time and Part-Time hours are available, • Career Advancement/Career Plan: We promote heavily from within, so from a Crew Member you can develop to become a Shift Leader, Assistant Manager, General Manager, and beyond!, • Work Attire: EPL logo'd shirt will be provided, black pants or jeans and no-slip shoes required

Job Description Cashier Company & Culture For over 35 years El Pollo Loco continues to dominate the market in delivering the best citrus-marinated fire-grilled chicken. We opened our first restaurant in 1980 in Los Angeles, and today we are over 450 restaurants strong and still growing! From our products to our people, we're truly amazing! Our Crew Members are the heart and soul of our restaurants. Each and every one of our Crew Member careers plays a meaningful and critical role in the El Pollo Loco familia. What's in it for you! We offer eligible Employees the following Benefits/Perks: • Sick Pay up to 40 hours per year, • Opportunity for Advancement/Internal Promotions, • FREE shoes twice a year for zero accidents*, • Flexible Schedules, • Competitive Pay, • Employee Reviews once a year and merit increase when applicable, • Continues Training and Development Cashier Job Summary: As a Cashier you will provide friendly and courteous service by greeting each guest with a smile and making them feel welcome. You may be asked to run the drive- thru station and work with a team to deliver fast and efficient service. Either way, your job will be to ensure great guest service 100% of the time! Requirements: • Experience: No experience is required, however one or more years of experience in restaurant or customer service position is preferred, • Education: No education is required, however a High School Diploma or equivalent (GED) is preferred., • Communication: Ability to speak and read English is required (second language a plus). Ability to speak effectively with external customers is required., • Competencies: Customer service skills, and experience entering orders into a Point-Of-Sales (POS) system is preferred, • Food Handler Card: A food handler card required where applicable Job Details: • Work Hours: Full-Time and Part-Time hours are available, • Career Advancement/Career Plan: We promote heavily from within, so from a Crew Member you can develop to become a Shift Leader, Assistant Manager, General Manager, and beyond!, • Work Attire: EPL logo'd shirt will be provided, black pants or jeans and no-slip shoes required

Job DescriptionGYU-KAKU JAPANESE BBQ is hiring SALARY RESTAURANT MANAGERIdeal candidate must be able to work in a team-oriented environment, be self-motivated, strong leadership, thrive on achievement of goals, flexible, detail oriented.This position requires limited supervision from the GM.Essential Functions & DutiesGuest Focus: • Creates and maintains an environment of hospitality and excellence in execution., • Proactively seeks out and resolves guest concerns or issues and use such opportunities as development/coaching tools for hourly staff., • Researches and makes recommendations to GM on methods for improving guest relations., • Mentors and coaches hourly staff to ensure their focus is on building authentic guest relationships., • Enhance customer satisfaction.Leadership:, • Provides proper & detailed training for all hourly personnel., • Handle employee issues such as tardiness, cell phone, attitude, language, etc., • Facilitate FOH and BOH issues, • Provide proper training for new hires., • Assist staff when busy (expedite or run food, pour water, bus tables, seat customers, etc.), • Manages the performance of all assigned hourly staff members and others in the absence of the GM., • Inspires staff daily to help foster morale., • Effectively communicates the company’s standards and expectations in daily pre-shift meetings., • Establishes a solid working relationship with the Kitchen staff to ensure unity between the back and front of house teams.Quality of Operations:, • Execute company policies and procedures., • Organize and conduct pre-shift and departmental meetings daily., • Maintain all reservation systems and book to accommodate business demands., • Maintain schedules, payroll and other administrative support to maintain food and beverage cost controls and inventory., • Follows company-established procedures for tracking and processing labor dollars., • Utilizes and accurately maintains all company established forms, binders & checklists.Repair and Maintenance:, • Communicates facility maintenance repairs to GM., • Provides a safe working environment for team members by maintaining the facility and ensuring equipment is in proper working condition.Financial Results:, • Builds sales to maximize bottom line results., • Achieves budgeted goals utilizing the company’s best practices., • Maintains inventory levels following company established guidelines for ordering and receiving., • Codes and approves daily and weekly invoices accurately utilizing the chart of accounts., • Deposits cash & credit cards on daily basis and per the company’s established procedures., • Follows company established procedures for accepting and handling all non-cash payments (I.E. trade scrip, discount coupons, promotion & administrative expenses, etc.)., • Maintains accurate records.Qualifications, • At least 2 years progressive management experience within a full service, high volume, and corporate environment preferred., • Associate’s degree or equivalent. BA/ BS in Hospitality/Restaurant Management preferred., • Must be able to work 55 hours a week, • Proficient in MS Word, Excel, and Outlook. Experience with Aloha POS and MenuLinks systems, • Must excel in customer service., • Must be able to work in a high-volume, fast-paced setting, prioritizing work assignments and managing multiple projects at one time., • Requires strong and professional verbal and written communication skills.Physical DemandsLight work: Employee may be required to lift 20 pounds maximum with frequent lifting and/or carrying of objects weighing up to 10 pounds., • Non-slip/non-skid shoes with closed toes, • Requires frequent bending and/or squatting and/or twistingBenefits, • Generous bonus opportunity, • Compensation package based on experience, • Health Insurance