Technical communication jobs in Rochester, New York - Page 9Create job alerts

Job Description Job Summary: The Coating Engineer provides engineering support for vacuum thin-film coating processes used in the manufacturing of optical components. This role working closely with other engineers and manufacturing staff. Essential Duties and Responsibilities: • Provide engineering support for PVD optical coating production, spanning development, production support, and process sustainment., • Work closely with design, and other manufacturing teams to transition coating solutions into stable and repeatable production processes., • Support Operations through guidance on substrate preparation, cleaning methods, coating materials, process parameters, tooling, and manufacturing improvements., • Assist shop-floor personnel with the setup, operation, and interpretation of optical thin-film measurement and characterization tools., • Investigate and resolve coating-related challenges in a production setting, including process evaluation, data analysis, and documentation of findings., • Present technical considerations, risks, and tradeoffs to leadership to aid project planning and operational decision-making., • Enhance coating designs and deposition processes with a focus on yield, performance consistency, scalability, and cost control., • Drive problem-solving and corrective action efforts for coating process issues using structured analysis methods., • Develop and deliver training to technicians on optical coating processes, equipment use, and standard operating practices., • Track process performance and lead initiatives aimed at continuous improvement and manufacturing efficiency., • Support the optimization and troubleshooting of optical coating equipment and associated processes., • Raises individual performance to a level that results in proactive responses to problem solving and continuous improvement., • Performs other related duties and assignments as required, depending on candidate skill set and on an as-needed basis to support evolving business needs. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate. Education, Skills and Experience: • Bachelor’s degree in optical, electrical, manufacturing or mechanical engineering. Experience will be considered in lieu of degree., • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Proficiency in coating design software and optical simulation tools., • Basic analytical skills, including basic statistical analysis., • Basic computer skills, including Microsoft Office and Windows operating systems., • Must possess experience related to troubleshooting and repairing optical coating chambers., • Availability outside of normal business hours to answer technical related questions., • Good oral and written communication skills., • Strong time management skills., • Work independently with minimal supervision.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview The C&S Facilities Group is seeking a Senior Mechanical Engineer / Managing Engineer to join our team in our Syracuse or Rochester office. This is a great opportunity for an individual to help grow our facilities practice. This individual will be responsible for leading projects, performing, and managing technical engineering. The Senior Mechanical Engineer will be responsible for delivery of mechanical engineering services in a multitude of markets including healthcare, higher education, government, aviation, food service, hospitality, and industrial projects in the Southeastern United States. Successful candidates should have experience and/or education in mechanical design for buildings and facilities. This position includes an emphasis on HVAC design (Commercial, Food Service, Industrial); previous field experience is a plus. Required Knowledge, Skills & Abilities: • Bachelor's Degree in Mechanical Engineering, • Minimum 10 years of related experience including skills in mechanical design of HVAC systems, • A Professional Engineering license is highly desired, • Project Management experience desired, • Serves as lead mechanical engineer on projects and/or works in the responsible charge of a licensed mechanical engineer, • Performs mechanical engineering calculations, edits specifications, and prepares design drawings, • Ability to perform Cooling/Heating calculations, Ventilation Calculations, ASHRAE 15 verification, • Familiarity with CHW VAV systems, VRF Systems, DOAS Equipment, Energy Recovery Equipment, • Familiarity with building codes and engineering design requirements, • Assists in developing project mechanical requirements, conducting field surveys, and developing construction documents, • Develop HVAC controls schematics, sequences of operation, and points lists, • Experience with renovation projects, • Coordinates with the other design disciplines in the delivery of mechanical designs, • Performs services during construction including responding to RFI's, reviewing submittals, and performing field observations, • Experience with Revit highly desired, • Beneficial prior project experience on healthcare, higher education, government, aviation, food service, hospitality, and/or industrial projects, • Strong communication, organizational, and interpersonal skills, • Self-motivated and works well in team environment *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Civil Construction GPS Manager Northern Clearing Inc is currently seeking a Civil Construction GPS Manager to join our team. The ideal candidate will be a highly motivated and experienced GPS Manager responsible for overseeing and optimizing our GPS technology operations onsite. The candidate will have a strong background in drone technology, Trimble Business Center (TBC), CADD, and earthwork/civil work takeoffs. This role demands technical expertise, problem-solving abilities, and leadership skills to ensure the success of our GPS technologies. This position will require travel across the U.S. Primary Focus: • Oversee GPS operations, ensuring accurate data collection, analysis, and application., • Operate and integrate drone technology for estimating and project assessments., • Utilize Trimble Business Center (TBC) for topographical analysis., • Use TBC and CADD for 3D modeling for onsite grade control and machine controls., • Perform earthwork and civil work takeoffs, including accurate quantity calculations., • Collaborate with project and estimating teams to improve workflows and achieve objectives., • Experience with drones in surveying, mapping, or related applications (a drone license is highly regarded)., • Proficiency in Trimble Business Center for topography processing and analysis., • Proficiency in CADD, AGTEK, and civil construction takeoffs., • Strong problem-solving, communication, and organizational skills., • Regularly required to sit, use hands, talk/hear, and operate computers, • Ability to lift up to 50 lbs. and navigate active construction sites, • Work both in office and field environments; outdoors in varied weather conditions, • Exposure to dust, machinery, noise, uneven terrain, and site-related conditions, • The office location is to be determined and will require travel., • More specific information will be discussed with potential candidates during the interview process., • For more information about Northern Clearing Inc. visit our website at northernclearing.com Job Posted by ApplicantPro

Job Description HIGH-LEVEL OVERVIEW The Sr. Export Compliance Specialist is responsible for providing guidance on divisional compliance policies (e.g. visitor processing, foreign travel, and restricted parties screening) in accordance with U.S. trade regulations (ITAR and EAR) and corporate compliance policies. This is an in-office position that can be based in Rochester, NY, - Salt Lake City, UT, - San Diego, CA, Melbourne, FL - or Clifton, NJ. Relocation assistance is available. EXPECTATIONS • Manage export license applications, submissions, exemptions, and recordkeeping, • Conduct audits & support investigations and disclosures of potential export or import violations, • Identify and escalation violations to global and regional trade teams, • Implement and adhere to Corporate Trade policies, • Develop and deliver trade compliance training consistent with corporate policies, • Ensure controlled technical data exports/deemed exports are properly authorized, • Work with cross-functional teams to provide guidance on trade related activities, • Implement site visitor process for non-U.S. Persons, • Oversee Restricted Party Screening processes, • Stay current on changes in regulations and industry best practices, • Manage multiple projects with minimal guidance and effective decision making ESSENTIALS • 6-10 years' experience in export and import compliance, defense and aerospace industry a plus, • Bachelor's Degree preferred, • In depth understanding of ITAR, EAR and import regulations, • Working knowledge with OCR EASE, • Experience supporting audits, investigations, and regulatory inquiries, • Strong data analytic skills with attention to detail and problem-solving ability, • Excellent written and verbal communication skills, • Ability to work independently as well as effectively collaborating with others, • Ability to obtain U.S. Security Clearance

Job Description The Engineering Technician will work on a team of engineers that is developing, manufacturing, and troubleshooting new products for internal and external customers. This position will be responsible for the documentation, assembly, and test of optical components, assemblies, and metrology equipment. The location of this position will be in Rochester NY. Essential Job Functions include the following, but are not limited to: • Work with design engineers, manufacturing engineers, and technicians on existing and new products, • Support the assembly and test of optical assemblies., • Generate and revise controlled documents such as metrology or assembly instructions., • Perform training of new or revised controlled documentation to production teams., • Use optical metrology and assembly equipment. This includes but not limited to interferometers, laser alignments stations, MTF benches, profilometers., • Recommend design and procedure changes for continuous improvement to product quality, performance, and manufacturability, • Troubleshoot and solve hardware and software issues with production equipment, • Report supply chain issues that are affecting production, • Advise supervisor of work status, workload, problems and progress as related to work assignments., • Perform liaison function between engineering team and all manufacturing operations for any related issues, problems, or improvements. In addition to the essential functions and duties listed above, all positions are also responsible for: • Meeting company standards pertaining to quantity and quality of work performed on an ongoing basis, performing all work related tasks in a manner that is in compliance with all Company policies and procedures. Physical Activities: Work may be active, could stand or sit for long durations and/or perform repetitious work at times. The employee may lift or move objects up to 20 pounds. Employees must grasp, manipulate, or assemble parts and components that are often very small. The noise level in the work environment is usually moderate, however, may be noisy at times. Must be able to wear appropriate clothing and personal protective equipment such as but not limited to masks, glasses, gloves, and specialty garments. The required PPE and training allow for the safe handling and processing of chemicals like adhesives, lubricants and solvents, and safe operation of job-related equipment and tools. Requirements Experience: · 3-5 years work experience with the assembly and test of optical systems Education: · Associate degree or higher in engineering, technology, or physical science. · May be waived based on work experience Specialized Knowledge and Skills: · Ability to handle critical and fragile optical components and sensitive equipment • Experience with CAD software and optical design software, • Experience with hand tools, microscopes, and electronic and optical test and measurement equipment, • Proficiency in general computer use and Microsoft Office, • Proficiency in comprehending technical drawings, • Strong ability to shift from one task to another to address changing production priorities, • Experience with optical assembly and metrology concepts, • Clear sense of ownership and ability to work independently, • Ability to work well in a group environment through good written and verbal communication skills, • Willingness to acquire new skills and knowledge, particular to job function and optics Pay range for this position $27.00 to $34.00 based upon experience. Thorlabs values its diverse environment and is proud to be an Equal Employment Opportunity/Affirmative Action employer. All qualified individuals will receive consideration for employment without regard to race, color, religion, gender, gender identify or expression, sexual orientation, national origin, genetics, disability, age or veteran status. Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law. Benefits Thorlabs offers a complete benefits package that includes medical, dental and vision insurance, company paid life insurance, a generous PTO package, a 401(k) plan, and tuition reimbursement just to name a few.

Job Description At Hewitt Young, excellence is our standard. We look for Builders who take ownership, push through challenges, and care about results as much as their craft. When you join our team, you earn your edge every day, and we make sure it pays off Role Mission The Learning Manager builds and deliver scalable training and development programs that increase workforce capability, improve execution in the field and office, and accelerate career progression across the company. This role ensures every Builder has the knowledge, tools, and confidence to perform safely, efficiently, and to Hewitt Young’s standards. Core Responsibilities • Build, manage, and deliver technical, operational, and leadership training programs for field and office roles., • Partner with Operations, Safety, and HR to identify training needs based on performance trends, skill gaps, and future workforce requirements., • Coordinate and deliver new-hire onboarding to reduce ramp time while increasing clarity, connection, and role readiness., • Develop career path frameworks for key roles (PM, Foreman, Estimator, Coordinator, Field personnel, etc.)., • Maintain accurate training records, certifications, and reporting for leadership visibility and regulatory compliance., • Implement and manage a scalable Learning Management System (LMS) to streamline training access and adoption., • Train supervisors and department leaders on how to coach, evaluate, and grow their teams., • Measure training outcomes and evolving programs based on real-world performance data., • 5–10 years of experience in training, instructional development, or workforce development within construction, trades, or operational industries., • Strong facilitation and communication skills with confidence in field and office training environments., • Ability to build structured training programs with clear learning objectives and evaluation mechanisms., • Experience with LMS platforms, training technology, and digital content development., • Analytical mindset with ability to track learning outcomes and connect results to performance., • Ability to travel to job sites and locations based on business needs. WHAT YOU'LL FIND HERE AT HEWITT YOUNG: At Hewitt Young, we don't just fill roles - we build careers! Above all we take pride in our work. Every project reflects who we are, how we operate, and the standards we stand behind.

Job Description Job Summary: We are seeking a highly skilled Senior Mechanical Engineer specializing in HVAC systems within manufacturing environments. This role is responsible for the design, optimization, and maintenance of HVAC systems that support production processes, environmental control, and regulatory compliance. The ideal candidate has strong experience in industrial ventilation, process cooling/heating, and contamination control, with a focus on reliability, efficiency, and safety in manufacturing operations. Key Responsibilities: • Lead the design and engineering of HVAC systems for manufacturing facilities, including process ventilation, dust collection, cleanrooms (if applicable), and thermal control systems., • Perform heating and cooling load calculations based on process requirements, occupancy, and equipment heat loads., • Design ductwork, piping, and equipment layouts to support production efficiency and environmental standards., • Select and size HVAC equipment such as chillers, boilers, air handling units (AHUs), exhaust systems, and filtration systems., • Ensure systems meet regulatory requirements (e.g., OSHA, EPA) and industry standards (e.g., ASHRAE)., • Support plant operations by troubleshooting system issues, improving performance, and minimizing downtime., • Collaborate with production, maintenance, EHS (Environmental Health & Safety), and facilities teams., • Lead or support capital projects, including system upgrades, retrofits, and new facility expansions., • Conduct energy assessments and implement efficiency improvements to reduce operating costs., • Oversee installation, commissioning, and validation of HVAC systems in manufacturing settings., • Develop and maintain engineering documentation, SOPs, and preventive maintenance strategies., • Mentor junior engineers and provide technical leadership across projects. Qualifications: • Bachelor’s degree in Mechanical Engineering., • 7+ years of HVAC engineering experience, with a strong focus on manufacturing or industrial environments., • In-depth knowledge of industrial HVAC systems, including process ventilation, make-up air systems, and environmental controls., • Proficiency in engineering and design tools (e.g., Solid Works, AutoCAD, Revit, HAP, TRACE or similar tools., • Familiarity with energy codes and sustainability standards (e.g., UL 60335-2-40, LEED). Skills & Competencies: • Strong analytical and problem-solving abilities in complex industrial systems., • Excellent project management and organizational skills., • Ability to work cross-functionally with operations and engineering teams., • Strong communication skills, both technical and non-technical., • Focus on safety, compliance, and continuous improvement. Work Environment: • Mix of office, production floor, and fieldwork in manufacturing facilities., • Exposure to industrial conditions such as noise, heat, dust, and mechanical equipment., • May require occasional travel between plant sites. Preferred Experience: • Experience with large-scale commercial or industrial HVAC systems, • Knowledge of building automation systems (BAS), • Experience in sustainable design and energy efficiency projects

Job Description We are currently hiring a Structural Engineer to join our Building Engineering Division in our Rochester, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, large commercial, residential and other unique projects. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Perform complex design calculations for analysis and design of new and existing structural systems., • Prepare documents and reports from concept design through advanced technical design documentation., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Review shop drawings, respond to RFI’s and perform field observations during CA phase. Salary Range: $64,000 - $80,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor of Science degree in Civil or Structural Engineering is required. Coursework in building systems engineering required., • Master of Science degree in Structural Engineering is preferred., • 3 years minimum experience with concrete, steel, masonry, and/or wood design is required., • Working knowledge of AutoCAD, Revit and structural engineering design software (RISA, SAP, and/or TSD) is required., • EIT required., • Excellent verbal and written communication skills. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description We are currently looking for a P & C Engineer with a minimum of 5 years of experience in protection and control system detailed design, cost estimating, and bid document preparation for commercial, industrial, generation, renewables, and utility power systems. Duties • Create/modify one-lines, three-lines, control schematics, wiring diagrams, relay panel arrangements, and cable lists for substations, relay settings and configuration files., • Design auxiliary AC and DC power systems., • Create/modify technical specifications for major equipment, such power transformers, power circuit breakers, control house, panel construction specification and other high-voltage substation related materials;, • Coordinate with and provide technical assistance to SCADA engineers, substation physical engineers, and control design staff in order to fully develop system integration of protection, control, and monitoring systems;, • Perform basic calculations such as voltage drop, CT burden and saturation, lighting, and short circuit with minimal supervision;, • Apply field mark-ups of project as-built drawings with minimal supervision;, • Assist project manager to develop scope of work and conceptual design for the projects;, • Communicate and coordinate project activities with project manager, client, and others as needed;, • Provide leadership, guidance and instruction to less experienced staff members;, • Take personal responsibility for the quality and accuracy of one's work;, • Panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations)., • Comfortable evaluating/reviewing control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as relay setting coordination., • A Bachelor’s Degree in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bid document preparation for medium voltage electrical power projects., • A PE license from a US State (NC and NY) is preferred., • Successful track record designing Protection and Control Systems., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Desired knowledge in low voltage coordination and arc flash studies., • Familiarity with Schweitzer Engineering Laboratories, General Electric and Basler equipment., • Periodic travel, ability to visit project sites., • Desired software knowledge in:, • ASPEN or similar, • Doble, • AutoCAD, • SKM, • ETAP Salary Range: $90,000 - $117,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Center for Youth: Started BY YOUTH FOR YOUTH. We partner with youth to realize their full potential, by creating opportunities, removing barriers and promoting social justice. The Center ensures understanding and values differences in people of diverse cultures, ethnic origins, sexual orientation, disabilities and beliefs. Overview: The Workforce Recruitment and Retention program helps young people find meaningful employment opportunities and retain their jobs. The main goal of the Navigator is to seek and secure higher-level positions and new opportunities for youth, especially those over 16 years old. This position will actively recruit potential participants, assess their skills and needs, and help them establish academic and employment plans and goals. They will also provide job-readiness information and support, maintain appropriate records and data collection, and identify quality businesses to offer internship and employment opportunities for youth. Schedule: Full time, 35 hours per week. Monday- Friday 9am-4:30pm Responsibilities: • Promoting the project, • Recruiting participants, • Screening and qualifying applicants, • Utilize evidence-based, ongoing assessment processes for individuals entering the program with well-defined expectations for participation., • Provide robust workforce readiness training for both hard (technical/vocational) and soft skills., • Develop strong and effective partnerships with employers to understand their needs and align training/resources to prepare individuals to meet those needs, • Educate employers about incentives, the benefits of hiring individuals from poverty and diverse backgrounds, and how to best engage the community, • Conduct post-placement follow-up and retention support for both individuals and employers, • Deliver intentional job matching services, which recognize individuals' interests and potential, leading to placement in jobs with living wages, comprehensive benefits, and room for growth., • Assisting with the Development and Maintenance of a Job Readiness Training, • Meeting with participants frequently to:, • Assess and review needs, • Assist in subsidized and non-subsidized employment obtainment, • Review and support academic and employment goals, • Provide service referrals and linkages, as appropriate, • Maintaining contact with and providing ongoing information to participants' support systems (i.e. parents, school, referral source), • Providing transportation to participants for program events and activities, as needed Required Qualifications: • Bachelors Degree in Human Services OR Equivalent combination of experience and education, • Knowledge of youth asset development and risk reduction theory, and youth serving systems, community resources, partnerships and collaborations, • Excellent verbal and written communication, • Excellent training, presentation and teaching skills, • Basic knowledge of Microsoft Office Pay Rate: $22- $24.75 per hour The Center for Youth Provides Equal Employment Opportunities

Job Description Compensation & Benefits • Pay Range: $38.50 - $57.50, • Medical, dental, and vision programs with 60-80% company contribution, • Long Term and Short-Term Disability, • 401K with Company match The Field Construction Manager oversees on-site construction activities to ensure projects are completed safely, on time, within budget, and in accordance with design specifications and quality standards. This role coordinates all aspects of field operations, including subcontractors, materials, equipment, and labor, while serving as the primary point of contact between the construction site and project stakeholders. The initial project will be a six-month project rerouting power lines in-ground and overhead as well as replacing manholes with civil and electrical crews in Rochester, Elmira, or Hartsville, NY. Responsibilities • Proactively resolve problems & help minimize change orders., • Weekly Report, Monthly Reports, site weekly minutes of meetings., • Be organized and document all project progress to provide a good paper trail., • Review contractor invoices and schedules and provide feedback., • Conduct weekly project progress meeting., • Be present at all times onsite when work is being performed., • Immediate notification to project maanger of all problems or foreseeable issues throughout construction, or any complaint presented by the general public., • Coordinate material deliveries., • Inspect work in progress to ensure that workmanship conforms to specifications, quality and adherence to construction schedules., • Review and understand the project documentation and any related documentation and provide input to enhance the constructability of the Project, taking into account schedule, cost and quality considerations., • Coordinate as necessary with all local and state municipalities., • Adhere to company policies, programs and procedures as well as Critical Infrastructure Protection (CIP), Federal Energy Regulatory Commission (FERC), North American Electric Reliability Corporation (NERC). Ensure all requirements are maintained throughout the project execution, • Excellent attention to detail and accuracy., • Effective communication and interpersonal abilities., • Ability to work independently and meet deadlines., • Directly related experience in manhole or underground/highway inspection:, • 4yr degree in a related field and 2+ yrs of field experience, or, • 2yr degree in a related field and 4+ yrs of field experience, or, • 5+ yrs of related experience in manhole or underground/highway inspection, • General knowledge of electric line work and electric theory., • General knowledge of applicable environmental regulations governing construction: storm water pollution prevention, wetlands, stream crossing, and spill response for projects requiring environmental permit or compliance., • Basic knowledge of industry codes governing the electric industry including NEC, NESC, and OSHA., • Underground/Highway inspection certification a big plus., • First Aid/AED training a plus., • OSHA 10 / OSHA 30 training a plus. Maverick Corporation is a full-service Engineering and Construction firm working in the telecommunications, Electrical vehicle infrastructure and electrical power sectors. Our customers range from traditional municipal and co-op electric utilities and telecommunication service providers to companies operating in the oil & gas and the transportation industries. Maverick Corporation and its affiliates provide project management, quality control and review services; aerial, underground, and technical services in construction; as well as design, survey, permitting, and owner’s agent services in engineering. Maverick has been incorporated since 1994, and is a growing company with headquarters in Boston, Massachusetts. Maverick Corporation is comprised of individuals from a wide variety of backgrounds and lifestyles. We embrace diversity and invite applications from people of all walks of life. We are proud to be an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state or local laws and ordinances. In accordance with the MA Wage Transparency Act, we are committed to equitable compensation practices and transparency in our hiring process.

Job Description We're making an investment in the next generation of veterinary doctors! As part of the professional veterinary curriculum, colleges encourage off-campus educational experiences in practices outside of the teaching hospital. Practical experience in a well-run and contemporary practice can be a valuable component of your veterinary education, preparing you to deliver better care after graduation. Our program is dedicated to contributing to your practice-readiness and to help you hit the ground running after graduation. Our program structure: Our externships are flexible—they can range from two to eight weeks during the year, according to your college curriculum – but are typically two or three weeks in length. Your schedule will include days, evenings and weekends. Our externship rotations are designed to allow students, under veterinary supervision, to practice the problem-solving, technical and communication skills that they have acquired during their clinical preparation. Externs are given the opportunity to work alongside our veterinary team and are encouraged to participate in all aspects of patient care. A stipend of $250 per week will be provided. What you'll be doing: Externs experience the typical caseload of a small animal practice. Under the supervision of your mentor doctor you will gather histories, perform physical examinations, develop diagnostic and therapeutic plans, scrub in to surgery, assist in the management of medical cases, provide wellness care, develop your client communication skills, polish your technical skills and produce appropriate medical records (SOAPs) within the time limits of daily practice. Who we're looking for: Extern students are expected to be enthusiastic and effective participants in our patient care activities, upholding the professional and ethical standards of our practice. Students participating in the externship program are suggested to review the Veterinary Practice Act in regard to the scope of duties that may be performed, and to be familiar with the type and degree of veterinary supervision that is required. These should be followed carefully in order to protect both yourself and our practice. As a veterinary student extern, we expect you to dress and behave in a professional manner and to meet the expectations that we have of all team members as outlined in our employee handbook. Requirements: • Be enrolled in an accredited DVM program., • You are authorized to work in the United States. As sponsors of the Veterinary Externship Program, we see ourselves to be part of your educational team, providing instruction, mentoring and evaluation of the students who participate. You will be assigned a mentor and work on the learning objectives as defined by your college program or to meet your specific goals. At the end of the externship your mentor will provide a written evaluation of your performance as required by your college program. We look forward to working with you!

Job DescriptionAudit Senior -This is with a Public Accounting Firm and requires Public Accounting experience. Job Title: Audit Senior Job Location: Hybrid Job Salary: $75k-$90k Requirements: 2+ Years of Public Accounting Experience Position Overview We are seeking an experienced Audit Senior to lead audit engagements, ensure high-quality financial reporting, and foster strong client relationships. The Audit Senior will plan and execute audits, supervise engagement teams, and provide actionable recommendations to improve controls and processes while ensuring compliance with professional standards. Key Responsibilities • Plan, organize, and execute financial statement audits and related assurance engagements in accordance with GAAP, GAAS, and firm methodologies., • Perform risk assessments, develop audit strategies, and design audit procedures tailored to client needs and risk profiles., • Supervise, mentor, and review the work of audit staff and junior team members; provide constructive feedback and on-the-job training., • Coordinate with clients to obtain necessary information, resolve issues, and communicate audit findings and recommendations clearly and professionally., • Prepare and review financial statements, audit reports, workpapers, and management letters to ensure accuracy and compliance with professional standards., • Identify control deficiencies, operational improvements, and business risks; develop practical recommendations and follow-up procedures., • Manage engagement timelines, budgets, and resource allocation to deliver high-quality work on schedule., • Extensive audit experience with a proven track record executing and supervising audits (required)., • Bachelors degree in Accounting, Finance, or a related field; Masters degree or equivalent is a plus., • 3+ years of public accounting audit experience (or equivalent), with progressive responsibility on engagements., • Strong knowledge of auditing standards (GAAS/PCAOB), financial reporting frameworks (GAAP), and internal control evaluation., • Proficiency with audit software, spreadsheet applications, and data analytics tools., • Excellent written and verbal communication skills, client service orientation, and ability to present technical matters clearly to non-technical audiences., • Demonstrated leadership, project management skills, and the ability to mentor and develop junior staff. Vacation/PTO Medical Dental Vision 401k Bonus Relocation Telecommute • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/08/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionDescription: Paylocity is an award-winning provider of cloud-based HR and payroll software solutions, offering the most complete platform for the modern workforce. The company has become one of the fastest-growing HCM software providers worldwide by offering an intuitive, easy-to-use product suite that helps businesses automate and streamline HR and payroll processes, attract and retain talent, and build a strong workplace culture. While traditional HR and payroll providers automate basic HR processes such as payroll and benefits administration, Paylocity goes further by developing tools that HR and businesses need to compete for talent and deliver against the expectations of the modern workforce. We give our employees what they need to succeed, including great benefits and perks! We offer medical, dental, vision, life, disability, and a 401(k) match, as well as perks that support you, your family, and your finances. And if it’s career development you desire, we provide that, too! At Paylocity, people matter most and have always been at the heart of our business. Help our award-winning technology company run effectively as you take on big challenges and find solutions with a position in Operations. Use your problem-solving skills to shape the way others see Paylocity. Launch your career with us! In-Office: This is a 100% in-office role based at our Rochester, NY location. Remote or hybrid work is not available for this position. Candidates must be able to work on-site five days per week during designated work hours. Position Overview The Lead Client Services Ops - Managed Services provides operational initiative, guidance and support across a Client Services Team of Account Managers, enabling outstanding client satisfaction. This is done by (1) monitoring team performance (quantitative and qualitative), (2) providing ongoing learning opportunities that continually share and build knowledge (3) working directly with clients on escalated issues (4) identifying and facilitating process improvements and (5) coordinating work across the team, including workload management and client assignments. The Lead exercises independent judgment in many situations to achieve and sustain client satisfaction. Supervises a team of approximately 6-10 Account Managers to ensure service levels are met or exceeded, as well as the day-to-day performance of their jobs. The Lead works with a group of Leads to prioritize and coordinate work for the maximum impact. Primary Responsibilities The below represents the primary duties of the position, others may be assigned as needed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Client Services Expectations • Dependability/Follow-up: Timely responsiveness & proactive follow-up, • Problem solve: Troubleshoot and problem solve leveraging knowledge, resources, qualitative and quantitative information, • Communication: Provide professional & appropriate internal/ external communication as well as progress updates to all stakeholders, • Guidance: Provide clients guidance on HR and Payroll best practices, organizational change management, and Paylocity product fit, • Implement and optimize products: Ability to implement ancillary products and optimize the primary HCM set up, • Metrics, Reporting and Analysis: Leverage formal and informal metrics to identify trends, monitor team & individual effectiveness and assess intervention results. Identify and advocate for necessary metrics and reporting. Develop tracking for metrics not yet developed. Use metrics to create a culture of continual improvement and to create focus where needed for purposes of learning, coaching, intervention and operational improvements., • Performance Management: Continually assesses and build knowledge (technical, business, soft skills) through real time teaching, one one-on-one discussions, team meetings and through the performance management process. Takes initiative and develops opportunities for the Account Managers to share and build knowledge and skills. Prioritizes learning objectives based on the highest impact to the clients and to Paylocity. Facilitates coaching, training and mentoring of AMs. Assesses client movement and prepares and supports impacted AMs to facilitate ongoing outstanding client service., • Client Focus: Proactively and reactively monitors and assesses client interactions and intervenes when needed in providing coaching and feedback. Acts as first level escalation and directly engages clients and takes action and ownership to resolve issues. Proactively identifies situations (AM turnover, lack of knowledge, etc.) that may disrupt outstanding service and takes steps to minimize impact. Ability to negotiate, influence, consult and resolve objections with C-Suite decision makers, • Operational Tools & Processes: Plan, lead and execute on cross-team work focused on increasing operational effectiveness. Represent the Service Center in key initiatives across Operations. Seeks out and facilitates opportunities to improve efficiency and effectiveness through better tools and processes., • Bachelor’s Degree, • 2 years of payroll and/or call center experience, • Successful experience in handling escalations and at-risk client retention efforts, • Project management experience, • Proficient in Microsoft Outlook, Word, Excel, • 1+ years supervisory experience, • HRIS experience, • Experience leading training initiatives, • Experience using reporting and metrics as a key part of the job, • Minimum 3 years’ experience in payroll, benefits and/or HR administration, • Ability to sit for extended periods: The role requires sitting at a desk or workstation for long periods, typically 7-8 hours a day. We embrace and encourage our employees’ differences in age, culture, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion or spiritual belief, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. We actively cultivate these differences through our employee resource groups (ERGs), employee experiences, perspectives, talents, and approaches to drive innovation in the software and services we provide our customers. We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. To request reasonable accommodation in the job application or interview process, please contact . This email address is exclusively designated for such requests, aligning with federal and state disability laws. Please do not send resumes to this email address, as they will be removed. The pay range for this position is $53,600 - $86,600/yr; however, base pay offered may vary depending on job-related knowledge, skills, and experience. This position is eligible for an annual bonus and restricted stock unit grant based on individual performance in addition to a full range of benefits outlined here. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Applicants should apply via . Requirements:

Job Description Bus Technician / Mechanic I - (Evenings & Weekends) Starting Pay:$ 33.17 per hour Top Rate Within 3 Years:$41.48 per hour AVAILABLE SHIFT:Sunday, Monday, Thursday 3:00 pm 11:30 pm. Friday and Saturday 5:00 pm 2:00 am. With Tuesday and Wednesday OFF Union Representation:ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Training provided stay current with the latest technology, • Tool Allowance provided, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor Education/Experience • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job DescriptionDescription: Paylocity is an award-winning provider of cloud-based HR and payroll software solutions, offering the most complete platform for the modern workforce. The company has become one of the fastest-growing HCM software providers worldwide by offering an intuitive, easy-to-use product suite that helps businesses automate and streamline HR and payroll processes, attract and retain talent, and build a strong workplace culture. While traditional HR and payroll providers automate basic HR processes such as payroll and benefits administration, Paylocity goes further by developing tools that HR and businesses need to compete for talent and deliver against the expectations of the modern workforce. We give our employees what they need to succeed, including great benefits and perks! We offer medical, dental, vision, life, disability, and a 401(k) match, as well as perks that support you, your family, and your finances. And if it’s career development you desire, we provide that, too! At Paylocity, people matter most and have always been at the heart of our business. Help our award-winning technology company run effectively as you take on big challenges and find solutions with a position in Operations. Use your problem-solving skills to shape the way others see Paylocity. Launch your career with us! In-Office: This is a 100% in-office role based at our Rochester, NY location. Remote or hybrid work is not available for this position. Candidates must be able to work on-site five days per week during designated work hours. Position Overview Client Services Manager Ops play a pivotal role in ensuring client satisfaction and retention. They develop strategies to effectively address issues, proactively service highly complex clients and lead a team comprising of leaders and various levels of Account Managers. Success in this role is driven by proficiency with technology, ability to quickly learn our HCM platform and products, and a deep commitment to providing outstanding customer service. This role requires a unique balance of leadership, technical expertise, process management, and soft skills to be effective. Client Service Manager Ops works with a peer team of Managers to appropriately prioritize client interactions and efforts on behalf of the client. This includes engaging directly with clients by directly addressing escalated calls and working to negotiate with the client and our internal partners for the betterment of the business. This role will support of our Growth client segment. Responsibilities The below represents the primary duties of the position, others may be assigned as needed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Develop strategies and initiatives to enhance and maintain client satisfaction and retention., • Lead and manage a team of Executive Account Managers providing coaching and guidance on client interactions, issue resolution, and the application of soft skills to minimize client risk., • Facilitate continuous learning opportunities to expand the knowledge base of your staff., • Offer proactive development opportunities aligned with corporate goals and values., • Create and maintain an effective and positive work environment that encourages open communication, learning, coaching and recognition in line with the organization’s values., • Monitor team workload, ensuring appropriate balance of volume, priority, and client alignment., • Manage the hiring and onboarding of new team members, emphasizing the establishment of strong trusted relationships from day one., • Generate creative solutions and innovative ideas to increase employee engagement and retention., • Collaborate with cross-functional partners to ensure that processes and tools are in place to best support clients and the client services team, including Technical Services, Finance, Tax, Sales, Support, Distribution, and Implementation., • Exhibit flexibility in day-to-day responsibilities, emphasizing agility in adapting to changing circumstances., • This job requires up to 25% travel for internal and/or client-facing meetings, • Bachelor's degree required., • 2+ years of previous leadership experience in a customer service/customer relationship role, • Experience using reporting and metrics as a key part of the job (Monthly/Quarterly KPIs), • Experience with leading other leaders preferred, • Previous experience in HCM/Direct Payroll Industry, • Experience working with payroll, HCM, or HRIS software, • Excellent knowledge of MS Office, including MS Excel, • Ability to sit for extended periods: The role requires sitting at a desk or workstation for long periods, typically 7-8 hours a day. We embrace and encourage our employees’ differences in age, culture, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion or spiritual belief, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. We actively cultivate these differences through our employee resource groups (ERGs), employee experiences, perspectives, talents, and approaches to drive innovation in the software and services we provide our customers. We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. To request reasonable accommodation in the job application or interview process, please contact . This email address is exclusively designated for such requests, aligning with federal and state disability laws. Please do not send resumes to this email address, as they will be removed. This role can be performed from any office in the US. The pay range for this position is $74k-115k/yr; however, base pay offered may vary depending on job-related knowledge, skills, and experience. This position is eligible for an annual bonus and restricted stock unit grant based on individual performance in addition to a full range of benefits outlined here. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Applicants should apply via . Your personal data will be processed for recruitment purposes in accordance with our Notice of Privacy Practices for Job Applicants and applicable data protection laws. Requirements:

Job Description STATUS: Full-time / Exempt REPORTS TO: Director of Member Service Center LOCATION: Rochester, Corporate Office COMPENSATION: The starting salary for this position is expected to be between $80,000 - $85,000. The actual salary will be determined based on experience and other-job related factors, consistent with applicable law. HOURS: 37.5 hours per week, including Saturdays (as needed) SCHEDULE: Monday – Friday 8:00am – 5:00pm, Saturday 8:00am – 2:00pm Position Summary The Manager, Member Service Center reports to the Director, Member Service Center, and is responsible for overseeing and assisting in the development of the Supervisor, Team Leads, and Member Service Center Representatives. This individual is responsible for providing high level support to team leadership and staff on escalated member service issues and inquiries, and for ensuring successful achievement of department sales and member service goals. Additionally, the individual is responsible for optimizing technology to ensure operational efficiencies and supporting strategic initiatives. Performs all responsibilities in a manner that serves The Summit’s Mission and upholds the credit union’s values. Essential Responsibilities – Responsible for the daily performance of the call center, ensuring that the team provides secure, compliant, and top-tier service for all account-related inquiries. Strategic Responsibilities: · Operational Excellence: Oversee daily workflows to ensure service level agreement (SLA’s) are met for the staff and call overflow vendor by managing staffing levels based on peak call volume trends. Monitor and provide guidance on member communications, via the Member Service mailbox, Live Engage (Chat), and social media platforms provided by the Marketing Department. · Compliance & Risk Management: Ensure 100% adherence to financial regulations and internal security protocols to protect sensitive customer data. · Performance Analytics: Analyze call data and KPIs to identify bottlenecks, reporting weekly/monthly performance trends to executive leadership. Utilize the Work Force Management system to review and approve the monthly MSC staffing schedule ensuring that it meets the staffing needs of the department. Monitor daily and respond, as needed to any unexpected volume or staffing events · Process Improvement: Partner with the Member Service Center Director, IT and Product teams to streamline the "customer journey," reducing friction in account authentication and common transaction workflows. Leadership & People Management · Culture Building: Cultivates an engaged and high-performing team environment where employees feel empowered, valued, and motivated to excel. Provides clear direction, expectations, and regular coaching to develop team capabilities and drive consistent performance. Maintain high employee morale and retention in a fast-paced environment through engagement initiatives and transparent communication. Collaborate with and be responsive to others, in daily interactions and on shared initiatives, with a focus on building respectful and professional relationships with colleagues in all areas of the credit union. · Mentorship: Directly manage and coach leadership staff to drive professional growth and high performance. Monitor service quality by resolving complex cases, focusing on Creating Member Loyalty (CML), compliance and identity verification, to optimize the member journey. · Escalation Management: Directly manage high-risk escalations and complex member grievances as the final point of contact. You will champion the recovery of member satisfaction by providing immediate, high-level conflict resolution that aligns with credit union values and preserves member retention. · Data Support: Provide daily, weekly, and month-end reports, identifying trends, providing support for service recommendations. Required Qualifications · Experience: 5+ years of experience in call center management, specifically within banking, credit unions, or fintech. · Regulatory Knowledge: Deep understanding of financial industry standards and privacy laws (e.g., Gramm-Leach-Bliley Act). · Technical Savvy: Expert-level experience with Workforce Management (WFM) tools, IVR systems, and CRM platforms (e.g., Salesforce or Genesis). In coordination with and under the direction of the Director, serve as an administrator/advanced user role for all member service-related software systems and programs. Participate in testing, provide support, and make recommendations on new technology, as necessary. · Education: Bachelor’s degree in finance, Business Administration, or related field. Key Performance Indicators (KPIs) The success of this role is measured by: · Service Level: % of calls answered within X seconds. Monitor and assess key performance indicators and relevant departmental statistics (such as Chat, call volume, MSC email, member experience (XP) responses, abandonment rates, schedule adherence, branch support, and quality service) to Director, as well as to Senior Leaders · Net Promoter Score (NPS): Overall customer loyalty and satisfaction. Employ Creating Member Loyalty, service standards and Member Engagement tools to ensure high employee performance and extraordinary member experience. · Cost Per Contact: Balancing high-quality service with operational budget constraints. · Attrition Rate: Keeping agent turnover below industry benchmarks. Other Responsibilities · Complete requests and projects on a timely basis, as assigned. · Serve as a backup call representative during peak times. · Perform duties of Member Service Center staff member as needed. · Perform other various duties as assigned. Qualifications and Skills Education & Experience - Applicants must possess the following qualifications or an equivalent combination of education and experience: · Education: Bachelors’ degree in a related field · At least 5 to 7 years’ professional experience, with at least 3 - 5 years in management/leadership position, preferably in a busy call center and/or high performing financial institution. Likewise, 3-5 years prior sales and service experience focused on creating positive member/customer experiences, strongly preferred. Knowledge/Skills/Abilities (including Technical & Systems/Equipment Proficiencies) · Excellent verbal and written communication skills, specifically, exhibiting a calm and reassuring demeanor to staff and members. · Proven ability to motivate, train/develop employees and inspire a team working environment. · Must possess aptitude for providing high level member service and problem resolution. · Strong interpersonal, analytical, and organizational skills. · Strong critical problem-solving skills. · Ability to handle confidential/sensitive situations in a professional manner. · Ability to manage and prioritize multi-functional tasks. · Advanced knowledge of Microsoft Windows and Office Suite, including Word, Excel, Outlook, & Power Point. Physical Requirements · Lifting (5-10 pounds) · Standing/Sitting extended periods of time, while working in front of computer monitor · Typing / Data Entry · Professional Office Environment · Overhead Lighting Training and Compliance Requirements · Subject to the compliance requirements of all related federal regulations, including but not limited to; the Bank Secrecy Act (BSA), Anti Money Laundering (AML), Information Security and Privacy policies and procedures. Employees complete annual BSA, AML, Information Security, Privacy and other job-related training requirements as established by the Summit and within deadlines. Licensure Requirements · In compliance with the Secure and Fair Enforcement for Mortgage Licensing Act of 2008 (S.A.F.E. Act) and the statute’s regulations, applicants must be eligible to register as a Mortgage Loan Originator (MLO). Candidates being considered will be subject to a credit check and fingerprinting. EQUAL OPPORTUNITY EMPLOYER: The Summit Federal Credit Union is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, protected veteran status, or status as a qualified individual with disability. Subject to the compliance requirements of all related federal regulations, including but not limited to; the Bank Secrecy Act (BSA), Anti Money Laundering (AML), Information Security and Privacy policies and procedures. Employees complete annual BSA, AML, Information Security, Privacy, and other job-related training requirements as established by the Summit and within deadlines. *Note: The above information on this job has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Northeast Electrical Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects throughout the Northeast. In this role, you’ll lead projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s of Science or Technology degree in electrical engineering., • Licensed Professional Engineer (PE) in New York State., • Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects., • Proficiency in AutoCAD and Revit., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis., • Proficiency with the National Electric Code., • Experience with the layout and design of medium and low voltage distribution systems., • Experience with the layout and design of lighting systems and controls. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! job purpose: To support and optimize manufacturing operations by maintaining equipment, ensuring product quality, and adhering to safety and compliance standards. The Operations Technician plays a critical role in executing production processes, troubleshooting technical issues, and contributing to continuous improvement initiatives to achieve efficiency, reliability, and organizational goals. This is a full-time Monday - Friday days position with responsibilities that include receiving troubleshooting calls on off hours and occasional off-shift work to facilitate training. responsibilities: • Diagnose and resolve equipment issues promptly, performing minor repairs using appropriate tools. Reset machines, understanding temperate flows and escalate malfunctions to supervisors to expedite complex repairs., • Monitor, using visual observation of gauges and listening to mechanical sounds to ensure the equipment works properly; work quickly and efficiently to ensure production flows smoothly., • Develop and maintain SOPs and training materials to standardize processes across shifts and improve operational consistency., • Support cleaning the packaging equipment and surrounding areas to maintain an audit-ready condition during production, • Create metrics and measures to support the optimization of the equipment and process, • Conduct first-level preventive maintenance (PM) activities, ensuring machinery operates at peak efficiency. Review and optimize PM schedules and Master Sanitation Schedules (MSS) to drive productivity., • Review and align on approval of Preventive Maintenance (PM) and Master Sanitation Schedule MSS for effectiveness and drive productivity., • Collaborate in in Root-Cause-Analysis (RCA), Continuous Improvement (CI) and metric development, • Participate in production trials, prepare for inspections and audits ensuring all necessary paperwork is complete for internal and regulatory agencies, • Provide technical support, leadership, and mentorship to team members, including applying complex troubleshooting techniques utilizing all resources available, including HMI, P&IDs, etc., • Provide and enable a safe environment by following all safety procedures: including the use of safety equipment to produce a quality product that meets all quality specifications, • Follow all safety, Good Manufacturing Practices (GMP), and workplace rules, • 18 years or older, • High School diploma or General Education Degree (GED) is required Bachelor's degree preferred, • Basic computational skills required. Simple math and reasoning required, • Experience with high-speed production lines (fast-paced production environment), • Strong mechanical aptitude with experience in equipment troubleshooting and maintenance., • Familiarity with SOPs, preventive maintenance, and sanitation standards., • Excellent communication and problem-solving skills., • Ability to work collaboratively in a fast-paced production environment., • Commitment to safety, quality, and continuous improvement. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Sitting/Standing/Walking/Lifting/Carrying: The technician stands throughout their shift and walks on uneven concrete and tile surfaces. Lifting up to 60 pounds on a frequent basis and 80 pounds on an occasional basis. Two or more employees' complete lifts of greater than 80 pounds., • Pushing/Pulling/Bending/Stooping: The technician pushes/pulls rolls of materials on the equipment and stacks collapsed boxes on a pallet or recycle container. The packaging technician pushes/pulls while using brooms, dust mops and brushes during clean-up duties. The packaging technician bends and stoops occasionally throughout the workday for varying lengths of time., • Squatting/Kneeling/Crawling/Twisting/Turning: The packaging technician may squat to pick up product from the floor, or during various clean-up duties. Occasional slight twisting and turning at the waist when loading material, or when performing responsibilities., • Climbing/Balancing/Reaching: The technician steps on and off the platforms and steps. The packaging technician reaches below and/or above shoulder level when removing or adding boxes to a pallet, loading materials or dumping and climbs on ladders to access equipment., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected. At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential position location: Webster, NY reports to: Sr Processing Manager exempt/nonexempt: nonexempt *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$35—$35 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionDescription: Paylocity is an award-winning provider of cloud-based HR and payroll software solutions, offering the most complete platform for the modern workforce. The company has become one of the fastest-growing HCM software providers worldwide by offering an intuitive, easy-to-use product suite that helps businesses automate and streamline HR and payroll processes, attract and retain talent, and build a strong workplace culture. While traditional HR and payroll providers automate basic HR processes such as payroll and benefits administration, Paylocity goes further by developing tools that HR and businesses need to compete for talent and deliver against the expectations of the modern workforce. We give our employees what they need to succeed, including great benefits and perks! We offer medical, dental, vision, life, disability, and a 401(k) match, as well as perks that support you, your family, and your finances. And if it’s career development you desire, we provide that, too! At Paylocity, people matter most and have always been at the heart of our business. Help our award-winning technology company run effectively as you take on big challenges and find solutions with a position in Operations. Use your problem-solving skills to shape the way others see Paylocity. Launch your career with us! In-Office: This is a 100% in-office role based at our Rochester, NY location. Remote or hybrid work is not available for this position. Candidates must be able to work on-site five days per week during designated work hours. Position Overview As the Account Manager, I play a pivotal role in resolving client payroll and HR system challenges while fostering exceptional customer relationships through fundamental technical expertise. By effectively utilizing available resources and prioritizing issues, the Account Manager I deliver outstanding customer service. The role involves meeting performance metrics through a combination of inbound and outbound interactions, including phone conversations, Zoom meetings, and email exchanges. Serving as the primary point of contact within a dedicated client support team, the Account Manager assumes full responsibility for maintaining and enhancing client relationships. Location: Rochester, NY Compensation: $25.00/hour Reports To: Client Services Team Lead Schedule: In Office Monday - Friday, 9:00am - 6:00pm (MST) Primary Responsibilities • Issue Resolution – Maintain consistent availability, manage workloads for optimal accessibility, effectively troubleshoot and resolve client issues, and escalate when necessary., • Client Focus - Champion clients' interests, delivering clear and effective resolutions. Collaborate with internal technical experts to provide optimal solutions., • Timely Solution Delivery - Prioritize successful and punctual solution delivery in line with client requirements and internal service metrics. Metrics include availability, outbound adherence, first call & case resolution, minimal escalations, and high client retention & satisfaction., • Leverage Resources - Appropriately leverage resources to source and validate answers, document issues while adhering to payroll policies, and ensure seamless client support. Embrace feedback and adapt behaviors as needed., • Dependability/Follow-Up: Proficiently multitask, respond promptly, and ensure timely follow-up., • Problem Solve: Skillfully troubleshoot and resolve issues using knowledge, resources, and qualitative and quantitative information., • Communication: Exhibit professional written and verbal communication consistently with internal and external stakeholders., • Bachelor’s degree, • Proficiency in Microsoft Office suite, • Strong written communication skills for business correspondence., • Strong team player with attention to detail, • Self-starter with the ability to handle multiple projects at once., • CPP, FPC, APA, and/or SHRM-CP certified, • Experience in customer service or previous client interfacing role, • Ability to sit for extended periods: The role requires sitting at a desk or workstation for long periods, typically 7-8 hours a day. We embrace and encourage our employees’ differences in age, culture, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion or spiritual belief, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. We actively cultivate these differences through our employee resource groups (ERGs), employee experiences, perspectives, talents, and approaches to drive innovation in the software and services we provide our customers. We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. To request reasonable accommodation in the job application or interview process, please contact . This email address is exclusively designated for such requests, aligning with federal and state disability laws. Please do not send resumes to this email address, as they will be removed. The pay rate for this position is $25/hr; however, base pay offered may vary depending on job-related knowledge, skills, and experience. This position offers a full range of benefits outlined here. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Applicants should apply via . Requirements:

Job DescriptionDescription: Paylocity is an award-winning provider of cloud-based HR and payroll software solutions, offering the most complete platform for the modern workforce. The company has become one of the fastest-growing HCM software providers worldwide by offering an intuitive, easy-to-use product suite that helps businesses automate and streamline HR and payroll processes, attract and retain talent, and build a strong workplace culture. While traditional HR and payroll providers automate basic HR processes such as payroll and benefits administration, Paylocity goes further by developing tools that HR and businesses need to compete for talent and deliver against the expectations of the modern workforce. We give our employees what they need to succeed, including great benefits and perks! We offer medical, dental, vision, life, disability, and a 401(k) match, as well as perks that support you, your family, and your finances. And if it’s career development you desire, we provide that, too! At Paylocity, people matter most and have always been at the heart of our business. Help our award-winning technology company run effectively as you take on big challenges and find solutions with a position in Operations. Use your problem-solving skills to shape the way others see Paylocity. Launch your career with us! In-Office: This is a 100% in-office role based at our Rochester, NY location. Remote or hybrid work is not available for this position. Candidates must be able to work on-site five days per week during designated work hours. Position Overview: HR Edge Team Lead is responsible for leading a team of HRAM who service our Mid-market Clients. This is done by helping them elevate their HR practices through providing professional HR guidance, identifying technical expertise support for the Client from the Client Service team, and introducing new products/services to the Client that may help with the management of the employee life cycle. This team is responsible for making recommendations to Clients regarding benefits, compensation, employee relations, recruitment, training and development, and information systems. Reports to HR Client Manager. Primary Responsibilities: The below represents the primary duties of the position, others may be assigned as needed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Provides leadership to the HR Edge Service Team by creating and maintaining collaborative teams focused on effective, high quality client service., • Respond timely and accurately to escalated or complex Client inquiries and process requests, according to established standards with attention to style, tone, and manner of communication. Client requests are received and monitored through the automated phone system and email., • Serves a vital role in coaching the team and being the escalation point for complex incidents., • Analyze reports and data daily. Report out to leadership team on team metrics and recommend improvements including changes in process, additional training for staff, etc. where needed., • Manage workflow and projects of HR Edge Team, • Provide training, coaching and direction to the team; lead performance discussions., • Maintain staff schedules and time off requests. Ensures appropriate coverage to service the client., • Communicates important information on new/updated processes and procedures to staff., • Conduct analysis of issues that are escalated to determine knowledge gaps and training needs, • Monitors for productivity and quality client service., • Develop appropriate recommendations and advice for Clients regarding employee relations, disciplinary action, operations, and performance matters., • Provide ongoing Client support with the use of diagnostic skills to identify root cause of Client issues, develop solutions and recommend appropriate action to prevent recurrence of problem., • Assists Clients with resolution of employee issues pertaining to leaves of absence, workers' compensation, and disability accommodations., • Promotes Paylocity products and services to fulfill ongoing Client requests., • Acts as liaison with Paylocity support teams to facilitate resolution of Client issues regarding payroll and human resources products., • Builds strong Client relationships and provides quality service in an effort to retain Client base., • Maintains knowledge of trends and changes in Human Resources legislation, and conveys local, state, and federal laws to Clients to maintain compliance., • Minimum of 5 years of progressive HR Generalist experience dealing with a broad range of HR related topics, • Minimum of 2 years of Leadership experience required OR a combination of HR and leadership experience, • Bachelor’s degree with a focus on Human Resources, Business Administration/Management, or related field required, • PHR or SHRM-CP certification preferred, • Proficiency with Microsoft Office Programs, • Advanced problem-solving and analytical skills, • Excellent communication and relationship building skills, • Experience in Shared Services call center environment is preferred, • Ability to sit for extended periods: The role requires sitting at a desk or workstation for long periods, typically 7-8 hours a day. We embrace and encourage our employees’ differences in age, culture, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion or spiritual belief, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. We actively cultivate these differences through our employee resource groups (ERGs), employee experiences, perspectives, talents, and approaches to drive innovation in the software and services we provide our customers. We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. To request reasonable accommodation in the job application or interview process, please contact . This email address is exclusively designated for such requests, aligning with federal and state disability laws. Please do not send resumes to this email address, as they will be removed. The pay range for this position is $59,600 - $95,000/yr; however, base pay offered may vary depending on job-related knowledge, skills, and experience. This position is eligible for an annual bonus based on individual performance in addition to a full range of benefits outlined here. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Applicants should apply via . Your personal data will be processed for recruitment purposes in accordance with our Notice of Privacy Practices for Job Applicants and applicable data protection laws. Requirements:

Job DescriptionDescription: Supervising Attorney, Tenant AdvocacyROCHESTER – TELESCA CENTER Employment Status: Full-Time FLSA Status: Exempt Practice Group/Team: Tenant Advocacy Organization Information Empire Justice Center, a diverse and highly respected statewide legal services organization, seeks a Supervising Attorney for our Tenant Advocacy practice group. This is an opportunity to join and grow in one of the most influential organizations serving marginalized low-income individuals and families in New York State. Empire Justice Center attracts and employs a diverse team of dedicated, determined, and passionate advocates who significantly impact the lives of low-income New Yorkers. We succeed through direct legal representation, high-impact litigation, and legislative and administrative advocacy. As an organization, we provide top-notch training and technical assistance to other advocates to ensure fairness and justice for New Yorkers. We thrive on our commitment to supporting justice for populations that have historically experienced severe oppression. These populations include racially diverse individuals and families experiencing poverty, housing insecurity, immigration issues, and domestic violence. Additionally, the organization advocates for people with disabilities, members of the LGBTQ community, and school-age children facing discrimination and violations of their civil rights in schools. Our offices in Rochester, Albany, Westchester County, and Long Island offer staff an exciting, dynamic, inclusive working environment with a solid commitment to work/life balance, teamwork, diversity, wellness, and personal/professional development. Position Summary Empire Justice Center is pleased to announce an opening for a Supervising Attorney. The Supervising Attorney will represent low-income tenants in Monroe County with a variety of legal issues, including eviction defense and enforcement of the warrant of habitability via Article 7-C and 7-D claims. The attorney will provide information, advice, and technical assistance to tenants and other advocates. The individual in this position will be responsible for the above responsibilities and supervising a practice group member. The Managing Attorney of the practice group will supervise this position. Salary The referenced pay range/scale represents this job's estimated minimum and maximum compensation. Individual annual salaries/hourly rates will be set within the job's compensation range and determined by factors including, but not limited to, education, experience, qualifications, the individual's expertise, market data, and internal equity considerations. Supervising Attorney, 5-8 years of experience, $93,439-$96,109 (Upstate NY) Benefits We are an organization that supports and promotes a healthy work-life balance. Empire Justice Center offers a generous benefit package, including: · 35-hour full-time work week. · Comprehensive health insurance plan. · 403(b) eligibility - immediately eligible to begin contributing from your paycheck. · Immediate vesting upon hire - ALL contributions (both employee and employer). o 1% employer match is eligible after 12 months of employment. o 3% non-elective annual contribution made by employer after 12 months of employment. · Generous vacation, sick, personal, and holiday time o 14 Paid Holidays o Vacation: 10.5 hours/month; Sick: 7 hours/month; Personal: 35 hours/year · Loan Repayment Assistance Program for qualifying employees. · Bilingual salary enhancement for qualifying employees. · Generous Bereavement Leave. · Employee Wellness Activities. · Voluntary Supplemental Disability. · Dental Insurance (employee paid). · Vision Insurance (employee paid). · $150K Group Term Life Insurance. · NYS Short-Term Disability. · FSA Eligibility. Empire Justice Center is an Equal Opportunity/Affirmative Action employer and strongly desires a diverse and inclusive workforce. Empire Justice Center provides equal employment opportunities to all employees and applicants. It prohibits discrimination and harassment of any type, specifically - race, color, religion, age, sex (including pregnancy and gender identity), national origin, disability status, genetics, neurodiversity, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Requirements: Essential Duties and Responsibilities · Travel to and work in the Rochester Telesca Center office is required to meet client and organizational needs. o This position is eligible for a hybrid work request under the organizational policy. · Provide legal representation to low-income tenants in eviction proceedings and warranty of habitability cases in housing courts in Monroe County. · Work closely with and supervise a paralegal to effectively and efficiently handle cases. · Provide support as needed to other attorneys and paralegals on the Tenant Advocacy Team. · Ability to maintain a docket of housing cases, including but not limited to holdover and nonpayment summary proceedings for eviction. · Collaborate actively with the advocates and attorneys from partnering organizations to find other resources to preserve clients' housing. · Ability to provide legal advice via an interpreter to clients who do not speak English as needed. · Work closely with other advocates to identify and assist with related legal needs that these clients may have, including immigration issues, services for crime victims, access to public benefits, and civil rights in housing and language access. · Impact litigation support, as needed. · Must demonstrate a high level of comfort and commitment to working with people from marginalized communities. · Work closely with your assigned supervisor and participate in regular supervision meetings, including work plan development and grant deliverable management. · Frequent traveling to housing courts in Monroe County is required. · Please note that this position will be required to supervise other practice group members. · Due to limited resources, all staff are expected to perform administrative and other support-related duties to serve our clients and fulfill our mission as a non-profit legal services organization. · Other duties as assigned by your supervisor and/or to meet the organization’s needs. Minimum Qualifications (Knowledge, Skills, and Abilities) · Juris Doctorate Degree from an accredited US law school or international equivalent. o Admission to the New York State Bar and in good standing as a member of the NYS bar. · Minimum of 5 years of legal experience related to landlord/tenant matters, housing, litigation, legal services, or similar experience. · Experience supervising legal staff. · Access to reliable transportation capable of traveling to housing courts in Monroe County. · Demonstrated proficiency in Microsoft 365 (Outlook, Word, Excel, SharePoint, PowerPoint), with the ability to learn and adapt to other applications quickly, including but not limited to file management applications, calendar applications, and virtual meeting applications. · Must demonstrate strong analytical skills. · Must demonstrate strong analytical and communication skills, including proficiency in technology that facilitates the delivery of communication, documents, and other materials. · Must demonstrate excellence in technology systems, facilitating the creation and delivery of communication, documents, and record-keeping, among other tasks. · Strong organizational and multitasking abilities, with the capacity to manage competing priorities and deadlines effectively. · Effective decision-making skills. · Experience in and commitment to working with marginalized communities. · Supervisory and problem management experience. · Excellent legal research and report writing skills. · Excellent written and verbal communication skills. · Excellent litigation and legal advocacy skills. · Ability to work on a team. · Case Management and Client Management experience. · Leadership Skills. · Strong collaboration/cooperation skills. Preferred Qualifications · Bilingual (English & Spanish). TO APPLY: Applications will be accepted until the position is filled. If interested, please visit our “Work With Us” employment page at . Please submit a complete application, including a resume, cover letter, writing sample, and contact information for three professional references (one supervisor is required). Please refrain from making phone calls or sending hard copies. Incomplete applications will not be considered. If reasonable accommodations are needed, please contact Mercedece Love, Human Resources and Compliance Manager, at . Empire Justice Center is committed to the full inclusion of all qualified individuals. As part of this commitment, Empire Justice Center ensures that persons with disabilities and/or communication barriers have reasonable accommodations.

Job DescriptionDescription: About Monroe Ambulance For over 50 years, Monroe Ambulance has served our community with Quality, Compassion, and Integrity—values that define not only how we care for our patients, but also how we care for our people. As a second-generation, family-led organization, we are deeply committed to being an employer of choice, fostering an environment where every employee feels known, valued, and supported to do their best work. The Opportunity We are seeking a fulltime Dispatch candidate to join our growing team. About the Opportunity • Full-time openings: starting rate is $20.00 per hour, • Overnight schedule provides a $3.00 stipend on top of the pay rates listed above., • Swing schedule provides a $2.00 stipend on top of the pay rates listed above Company Purpose To positively impact healthcare outcomes for our community through education and innovation by skilled and empowered employees POSITION OVERVIEW The Dispatcher is responsible to handle and triage inbound calls for service, evaluate the nature of the request, and dispatch appropriate resources according to the standard operating procedures, consistent documenting of calls based on Monroe Ambulance standards. This position demands a high degree of situational awareness. The dispatcher is critical to the safety of our employees and patients and must maintain regular communication with crews to monitor safety. This position requires cooperation between the dispatcher and the operations team on vehicle movement throughout the shift. The dispatcher is responsible for capturing all required data points, which is critically important to the successful management of the business. Duties & Responsibilities Patient Care • Respond to incoming calls within defined documentation standards and protocols for department., • Appropriate units are dispatched that align with care needs of call promptly., • Reassure patients, family members, and customers., • Ensures positive interactions with patients, family, members, and customers., • Communicates changes in patient medical conditions prior to arriving on scene. Safety • Conduct themselves with a safety-oriented focus for self, customers, and teammates., • Advise crews of potential hazards that may impact crew safety., • Regularly communicate with crews through the shift and throughout a response and dispatching additional resources when needed., • Monitor the status of the fleet to ensure crew safety – i.e., calling for police and/or fire department assistance., • Clean and sanitize workstation at the beginning and/or end of shift., • Ability to wear personal protective equipment (N95 mask) when necessary. Team • Act in strict accordance with Monroe Ambulance’s Code of Conduct to ensure a positive work environment – positive interaction every time., • Alert CISM team of stressful events., • Monitors schedule of the crews to ensure they are given appropriate breaks and proactively ensure crews are returning on time whenever possible., • Identifies opportunities for improvement: operations, turnaround times, streamlining of work processes., • Operate in a transparent manner with all co-workers and management staff. Documentation • Will thoroughly and accurately document each call for service in accordance with the standard operating procedure., • Will submit completion exception reports with supporting information., • Monitors chart completion and that key data points are completed appropriately. Requirements: EDUCATION & EXPERIENCE • Possess a high school diploma or equivalent GED certificate., • One-year certificate from college or technical school, or three to six months of related experience and/or training, or equivalent education and experience., • Must be able to pass the Emergency Medical Dispatch (EMD) program within 6 months of hire and maintain certification during employment., • Successfully completes required training programs in Hazmat, MCI Management (NIMS 100 & 700) prior to completion of classroom orientation., • Emergency Medical Technician (EMT) training is desirable, • Emergency Medical Dispatcher (EMD) preferred Requirements • Active listener with excellent communication skills to collaborate with others under any type of condition., • Ability to multitask with different, and sometimes conflicting, events happening at the same time., • Good computer/typing skills for dispatching duties., • Understand and follow both oral and written instructions promptly and accurately., • Possess the skills to maintain a high degree of situational awareness., • Ability to process information quickly., • Ability to evaluate incoming calls to interpret the nature and urgency of the call., • Ability to remain calm and effective under heavy workloads and in emergency situations., • Learn street locations, station locations, and geography of the areas served. Physical Demands While performing the duties of this job, the employee will sit for extended periods of time, frequently required to stand, and walk. The employee must frequently speak and hear clearly and occasionally withstand higher than average levels of noise. The employee frequently performs tasks with manual dexterity (i.e., use of fingers, hands, and arms); reach with hands and arms. The employee will rarely climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. The employee must occasionally lift and/or move up to twenty-five (25) pounds. Specific vision abilities required by this job include close, color vision, peripheral vision, depth perception, and the ability to adjust focus. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable the individuals with disabilities to perform the essential functions. The work environment is frequently hectic with quick turnaround times and deadlines. The noise level in the work environment is usually moderate. The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel in this position. Employees may perform other related duties as assigned to meet the organization's ongoing needs. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions. Monroe Ambulance is committed to equal employment opportunities for all employees and applicants for employment. Monroe Ambulance prohibits discrimination against employees and applicants in all aspects of employment including but not limited to recruitment, hiring, compensation, promotion, training, leaves of absence, benefits, termination, employer-sponsored activities, social and recreational programs, and recognition. Monroe Ambulance prohibits discrimination against all legally protected classes including age, color, creed, disability, domestic violence victim status, gender expression, gender identity, genetic predisposition, marital status, military status, national origin, parental status, political affiliation, pregnancy-related condition, prior arrest/conviction record, race, religion, reproduction health choices, sex, sexual orientation, or other non-merit-based factors. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. *Additional Salary Detail The referenced pay represents our good faith and reasonable estimate of the potential compensation at the time of posting. Actual compensation will be determined based on various factors, including the candidate's qualifications, experience, and skill set.

Job Description FLOWER CITY GROUP is hiring a KIT PACKING SUPERVISOR! Join a fun, successful, and rapidly growing company in the printing and packaging industry! If you’re looking for a place where you can build your skills, contribute to a strong team, and grow your career, this is the perfect opportunity. At Flower City Group, we Hustle, We Own, We Learn, We Invent, and We Believe. Come be part of a culture that celebrates initiative, curiosity, and teamwork. Schedule This position is for our B Shift: Monday–Friday, 3:30 PM–12:00 AM (Midnight), with weekends based on business need Candidates must be willing to train on our A Shift: Monday–Friday, 7:00 AM–3:30 PM • Training may last up to three months, depending on your learning pace and readiness to transition independently to the B Shift. Summary/Objective: Under the direction of the Kit Packing Manager, the Kit Packing Supervisor works to ensure all jobs are shipped out on time and in an orderly manner. Essential Functions: • Provide daily direction to Line Leads once schedule is set., • Review first piece sample with Customer Service at the start of the job to verify specifications and assembly requirements. Verify sample is present at the start of production., • Set up production lines for kit packing projects. Work with Receiving to organize and stage all material required for production by job., • Work to ensure that quality requirements are understood by employees on the kit packing line., • Coordinate first piece and during run quality checks with Quality team., • Set the standard and communicate to all workers the required hourly output needed to complete each project. This is based on the quoted hours for all projects., • Work with Line Leads to optimize efficiencies. Reviewing: Assembly processes (assembly line vs piece work), Distance traveled, Start times, down time, and Best in Class manufacturing processes., • Work with Line Leads to complete scorecards and document hours charged to job., • Analyze efficiencies on the line (actual vs estimated)., • Facilitate orderly breakdown and put away once jobs are complete., • Train Flower City Group employees, as well as temporary workers, and communicate their responsibility in adhering to the four operating principles: Safety, Quality, Delivery and Flexibility., • Ensure that the plant is always kept in a clean and orderly fashion., • Work with Facility Manager, as well as the Human Resources Department to maintain a supply of candidates to fill openings as workflow dictates. Maintain an up-to-date phone contact list., • Assists the Facility Manager with additional tasks as requested., • Seeks guidance and direction as necessary for performance of duties., • Demonstrates good judgment in investigating problems., • Respects the confidentiality of company information., • Maintains cooperative working relationship with supervisor., • Demonstrates ability to tactfully handle difficult situations., • Makes best use of time during the workday., • Consistently shows ability to recognize and deal with priorities., • Performs all duties in an independent manner with little supervision., • Recognizes and performs duties which need to be performed although not directly assigned – assists others as needed., • Does not abuse or take advantage of time off, always provides proper and advance notice of absence., • Maintains a well-groomed appearance, appropriate for the industry., • Regularly required to talk or hear., • Regularly required to sit, regular use of hands., • Frequently required to stand and walk., • Occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl and use foot/feet to operate machine., • Occasionally lift and/or move up to 25 pounds. Requirements/Qualifications: • Proven success in a warehouse or fulfillment environment, • Excellent verbal and communication skills, • A two-year degree or equivalent from a technical school, • Two (2) years of work experience or an equivalent of four (4) years in the industry AAP/EEO Statement Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation. Schedule This position is for our B Shift: Monday–Friday, 3:30 PM–12:00 AM (Midnight), with weekends based on business need Candidates must be willing to train on our A Shift: Monday–Friday, 7:00 AM–3:30 PM Training may last up to three months, depending on your learning pace and readiness to transition independently to the B Shift.

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job Description Licensed Veterinary Technician Salary: $25.00 - $30.00 per hour, determined by the candidate's skills, experience, and qualifications. $2,500 Sign-on Bonus! Schedule: This is a full-time position. Option to work three long shifts and one short shift to reach 40 hours, allowing for three days off each week. Ark Veterinary Hospital and Urgent Care is hiring an Urgent Care Licensed Veterinary Technician to provide skilled care to our patients and exceptional service to our clients. Our ideal candidate has experience in animal care, client communication, and veterinary procedures, with a passion for improving the lives of pets and their owners. What to Expect as a Licensed Vet Tech with Ark Veterinary Hospital and Urgent Care • A comprehensive benefits package, including medical, dental, and vision insurance, • Paid time off and a 401(k) plan for full-time employees, • Professional development opportunities, • Employee pet discounts! Because we know your pets are family, too., • Support veterinarians with patient care, exams, surgery, anesthesia, and recovery., • Safely handle and restrain animals with compassion., • Communicate clearly with clients, including care instructions and status updates, • Perform technical duties such as lab work, radiographs, injections, and IV catheter placement., • Maintain accurate medical records and assist with medication dispensing., • Help keep exam rooms, treatment areas, and equipment clean, stocked, and ready., • Licensed Veterinary Technician (LVT) certification., • Ability to handle animals safely and compassionately., • Knowledgeable about common disease states and able to alert veterinarians to changes in patient conditions. Ark Veterinary Hospital & Urgent Care has been a trusted part of the Henrietta and Rochester communities since 2018, offering top-quality care for dogs, cats, and exotic pets. Founded by Dr. Christina Seidel, our hospital provides both general veterinary services and urgent care, making us one of the few exotic urgent care centers in the area. We are dedicated to exceptional patient care, community involvement, and supporting local shelters through spay/neuter services and veterinary care. We are dedicated to establishing a culture that celebrates all forms of diversity and allows us to be an inclusive service provider in this community.

Job Description Technician I, Garage Days Alignments Starting Pay:$33.17 per hour Top Rate Within 3 Years:$41.48 per hour AVAILABLE SHIFT:7:00 am 3:30 pm Monday, Thursday - Sunday 7:00 am 3:30 pm DAYS OFF: Tuesday and Wednesday Union Representation:ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Training provided stay current with the latest technology, • Tool Allowance provided, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor, • Must be able to perform proper front wheel alignments in order to maximize tire mileage on Articulated Buses, 40 Foot Buses and Non-Revenue Vehicles as required, • Must be able to perform proper front-wheel alignments to maximize tire life on articulated buses, 40-foot buses, and non-revenue vehicles, • May be assigned articulated bus repairs and overhauls, ramp and battery PM inspections and repairs, as well as other garage work, road calls, and towing as needed Education/Experience • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Join one of Rochester's Top Workplaces! We would love to welcome you to the team! GreenSpark Solar creates fiercely local, cost-effective, clean energy options in the Greater Rochester Community. We feel a huge responsibility to succeed at GreenSpark. As a B Corporation, success is directly tied to honoring our triple bottom line of commitments to people (our employees and their families, our Customers and residents of the communities where we do business), planet (our local and the broader global environment) and profits (providing capital to grow, revenue to share among our employees, and a return to our investors). This is important work, and we have fun doing it. Our values are reflected in our workplace — our office is directly powered by onsite wind turbines and solar panels, our fleet includes all-electric and hybrid vehicles, dogs roam the office, and we strive to be an unabashedly inclusive, diverse workplace. Our Core Values Find Joy Keep it Real Work Together Believe in People Be a Leader GreenSpark Solar is seeking an experienced and dynamic Commercial Project Manager to join our team! In this pivotal role, you will lead and oversee the full lifecycle of commercial installation projects. Your responsibilities will encompass everything from scope development and contracting to engineering, construction, and project close-out/commissioning, ensuring alignment with stakeholder commitments and company financial goals. You will report directly to the Manager of Commercial Project Management. The ideal candidate will have extensive project management experience and a solid understanding of the solar industry. Key Responsibilities: * Project Planning: Direct and manage all project personnel, subcontractors, and suppliers from initial planning through to project close-out. Ensure seamless coordination and execution of project phases. * Quality Control & Progress Reporting: Schedule and conduct site inspections to monitor quality and progress before, during, and after construction. Provide detailed progress reports and address any issues promptly. * Performance Tracking: Track and measure project progress, timelines, and milestones against established plans and budgets. Ensure that all project deliverables are met within scope and financial parameters. * Vendor & Subcontractor Management: Manage and coordinate multiple vendors, subcontractors, and engineers across various projects simultaneously, ensuring efficient project execution and adherence to schedules. * Risk Management: Proactively identify, assess, and document project risks. Develop and implement contingency plans and manage any changes to scope, schedule, and cost effectively. * Safety & Quality Assurance: Promote and uphold company safety and quality standards throughout the project lifecycle. Document and track compliance to ensure high standards are consistently met. * Client Relations: Deliver exceptional project management services in alignment with client expectations. Strengthen and maintain strong client relationships and manage stakeholder needs effectively. * Task Prioritization: Prioritize and delegate tasks across multiple projects, ensuring timely completion and successful project delivery. Education & Qualifications: * Minimum of 3 years of relevant experience preferred, including at least 2 years in project management. A strong background in Engineering, Procurement, and Contracting (EPC) is essential, with a minimum of 3 years of solar industry experience (strongly preferred). * Bachelor’s degree or equivalent experience preferred. * NABCEP Certified PV Installation Professional or equivalent (strongly preferred). * Project Management Professional (PMP) certification (strongly preferred). Desired Skills & Abilities: * Enterprising Spirit: Proactive and able to take initiative. Capable of making independent, high-level decisions and taking calculated risks to drive project success. * Investigative Mindset: Strong problem-solving skills with the ability to navigate complex project situations, utility requirements, and site conditions while adhering to strict budgets and timelines. Proficient in reviewing multi-trade construction drawings and understanding construction best practices. * Organizational Skills: Exceptional organizational abilities with a focus on maintaining project budgets, schedules, and documentation. Detail-oriented with a process-driven approach. * Communication: Excellent written and verbal communication skills, with the ability to effectively convey information and collaborate with various stakeholders. * Technical Proficiency: Proficient in Microsoft Word, Excel, and Project. Familiarity with Netsuite or equivalent ERP systems is a plus. Work Environment: * This role is primarily sedentary and it is estimated 75% of this position will be performed remotely, and 25% in person. It is expected you will visit job sites 1-2x per month. Perks & Benefits: * Annual salary range of $70,000-120,000+ annually * Level I - $70,000-$84,000 * Level II - $84,000 - $105,000 * Level III - $105,000 - $120,000+ * Weekly pay * Quarterly bonus potential based on company performance * 401(k) profit sharing plan * Comprehensive Medical & Dental Insurance * GreenSpark covers 75% of health insurance premiums, health deductible expenses, and dental premiums for both employees and their families * Flexible work schedule and hybrid work arrangements. * Three weeks (120 hours) of vacation time, plus flexible paid time off (PTO) after the first year. * 12 days (96 hours) of paid sick leave * Eight paid company-wide closure days * Wellness Week: Enjoy a paid collective week off for the entire company * Company-issued cell phone or reimbursement * Opportunities for professional growth through training and development programs * Annual company retreat to foster team building and company culture * Access to Employee Assistance Program (EAP) for confidential support and counseling services * Pet-friendly work environment If you have project management, electrical, and/or solar experience and want to work at an amazing company then apply today! GreenSpark Solar is an equal opportunity employer committed to diversity in the workplace. We do not tolerate harassment or discrimination of any kind and seek to remove barriers and increase opportunities, access, and advancement for all people. Do not let historical barriers prevent you from Jumping on this life changing opportunity–reachout and ask questions if you have them–we are here!

Job Description SALES REPRESENTATIVE Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a Sales Representative. The Sales Representative is responsible for acquiring and retaining broad based customer relationships with an emphasis on the machining industry. This position offers a base salary range of $80,000 to $90,000, commensurate with experience, and a performance-based commission structure based on new customer acquisition, growth of existing accounts, and overall sales revenue. This position is full-time on-site in Rochester, NY. In order for a candidate to be considered they must be local to Rochester, NY, remote or hybrid arrangements are not available for this role. DUTIES & RESPONSIBILITIES • Prospect for new business by researching, primarily using the Internet., • Prepare and present customized proposals that highlight technical solutions and drive customer commitment., • Using excellent verbal communication skills, the salesperson deals with customers, vendors and all channels of distribution to assess and analyze timely product delivery and any hindrances to it., • Initiates and makes “cold calls” on a planned basis to enhance exposure to new situations and opportunities, • The Sales Representative will be expected to travel 20% of the time, where they will directly sell in the field, deliver parts, meet with prospects, visit existing customers, and attend trade shows, sales forums, and business meetings to represent the company and generate new business opportunities., • Serves as a point of contact for business customers and maintains a high level of product and vendor knowledge., • Under limited direction, and with a quality work ethic, the employee shall function as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Maintain a high level of knowledge about sheet metal, laser cutting or punching, forming, welding and assembly., • Strong verbal and written communication skills, good organizational skills, and personal leadership skills., • Must be self-motivated, able to work independently, and have a desire to continuously improve one’s skill set and technical knowledge., • Must be comfortable with cold calls and lead generating., • Promote and support the requirements and principles of the Advantech Quality Management System and AS9100., • Knowledge of Internet, good PC skills with proficiency with Microsoft Word, Excel, and PowerPoint., • Must be willing to travel., • Requires a NYS driver’s license and vehicle insurance., • Associate’s degree required, Bachelor’s degree preferred., • Minimum 3 years of experience in outside sales, preferably in manufacturing. JOB BENEFITS • Vacation, • Paid Sick Leave, • Holidays, • Health, • Dental, • Vision, • Life Insurance, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $80,000 to $90,000 per year. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description At AeroSafe Global, we are reframing the last mile as the first moment of care. We are an integrated healthcare service partner solving the pharmaceutical industry’s complex challenges by bridging the gap between cold-chain logistics and the point of care. Our mission is to ensure the integrity and delivery of life-saving medicines to every patient. Role Overview We are looking for a versatile, fast-paced Graphic & Presentation Designer to join our team for 20 -40 hours per month. This role is perfect for a seasoned freelancer or a production-focused designer who excels at turning complex information into visually compelling stories. You will be responsible for the "last mile" of our content—taking raw drafts and data and polishing them into high-stakes PowerPoint decks, professional white papers, and engaging social media assets. Key Deliverables • PowerPoint Design: Transforming rough outlines into client-ready presentations. This includes data visualization, and "quick-turn" polishing of existing decks, • Long-form Layouts: Designing multi-page white papers, eBooks, and guides that are both beautiful and easy to read, • Infographics: Translating data and abstract concepts into clear, digestible visual graphics, • Social Media Assets: Creating templates and one-off graphics for LinkedIn and other channels, • Mastery of PowerPoint: Deep knowledge of master slides, theme colors, and building "bulletproof" decks that non-designers can use, • Adobe Creative Suite: Expert-level skills in InDesign (layout), Illustrator (vector/infographics), and Photoshop, • Data Visualization: A proven ability to turn spreadsheets into meaningful charts and diagrams, • Availability: We require a consistent presence. Ideally, hours are spread across 3 days per week to ensure we can meet "quick turnaround" needs, • Communication: We use Teams/Email/Asana. You must be responsive during agreed-upon working hours, • A "Finisher": You take pride in the details—alignment, typography, and consistent margins matter to you, • An Efficient Communicator: You know how to ask the right questions upfront to avoid wasted time Please submit your portfolio and resume to Note: Please specifically highlight 2–3 examples of PowerPoint decks, white papers or landing pages you have designed. Travel: None Tools & Equipment: PC, telephone, and other office equipment Physical Requirements: While performing the duties of this job, frequently will be required to sit; type; use hands to finger, handle or feel objects, tools, or controls (some repetitive motion); and talk or hear. Also, occasionally will be required to stand, walk, reach with hands and arms, bend, stoop, kneel, and crouch and lift and/or move up to 40 pounds. Specific vision abilities required by this job include some close vision. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Environmental Factors: Normal office environment Equal Employment Opportunity Policy: AeroSafe Global provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Competitive salary, • Employee discounts, • Opportunity for advancement, • Paid time off, • Training & development Professional Sales | Customer Service | Business Development Are you looking for a career-defining sales position where the fantastic earning potential and flexible scheduling are surpassed only by the relationships built with coworkers and clients that will last a lifetime? Wireless Zone is a Verizon Wireless Premium Retailer, which means we sell and service the latest in Verizon Wireless products and services. We offer exciting job and growth opportunities in a flexible selling environment. We are looking for enthusiastic, eager and passionate sales talent interested in fulfilling the mobility and communication needs of our customers. We will provide you with all the tools to succeed; all you need to bring is the drive to be the best. We service walk-in customers, business clients and encourage outside sales efforts that builds your own portfolio of clients. Whats in it for you? Uncapped earning potential balanced with flexible scheduling Individual competition balanced with team goals On-going training on the latest technology Career advancement opportunities Paid time off, and 401K plan Why Wireless Zone? Have more control over your income. We offer a competitive salary plus commissions and other incentives. Be challenged. Our technologies, and our customers needs, are always evolving. Youll be at the forefront of the tech worlds latest trends. Create a path for success. We believe in lifelong learning and provide award-winning training also from day one. Our investment is in you and your success. Responsibilities • Greeting and welcoming the customers., • Go the extra mile to drive sales., • Actively seek out customers in store., • Cross sell products., • Comply with inventory control procedures, • Team up with co-workers to ensure proper customer service., • Engage with team members and customers to ensure a full understanding of Verizon products, services and solutions., • Work with store assistant manager to develop business strategies to raise our customers pool, expand store traffic and optimize profitability., • Must be able to work in a team environment., • Engage in sales strategy development to ensure our products and services are effectively showcased throughout the store., • Suggest ways to improve sales (e.g. planning marketing activities, changing the stores design), • Working with the systems and success framework that will be provided to you., • Ensure high levels of customers satisfaction through excellent service., • Meet individual sales quotas., • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies., • Propose innovative ideas to increase market share., • Be a shining example of well behavior and high performance., • Additional store associate duties as needed., • High energy level and self-motivated., • Willingness to learn and being open to new ideas., • Drive for excellence., • Excellent listening skills., • Ability to self-manage, • Ability to manage and organize your time., • Ability to work evenings, weekends, holidays and a 40-hour work week., • Providing superior customer service., • Strong follow-up on each customer you serve., • Desire to learn about the products benefits, features and value and deliver that knowledge to the customer., • Two years direct retail sales experience preferred., • Effective verbal, written and interpersonal skills., • Positive attitude, entrepreneurial spirit., • A willingness to generate and follow up on Leads in a professional, retail or outside sales environment., • Market knowledge, • Ability to manage leads, • Market yourselfWireless Zone provides you with the following:, • Flexible hours., • Base pay plus highest commissions in the industry., • Professional training and mentoring program., • Opportunities across the state., • A dynamic team environment.Wireless Zone is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local laws. Wireless Zone maintains a drug-free workplace.

Job Description 2nd shift: Monday-Friday 2:30PM to 11:00PM or 3:30PM to 12:00AM (15% Shift Differential on top of salary) We are seeking an experienced Second Shift CNC Team Lead to provide hands-on leadership while maintaining production, quality, and safety standards. If you thrive in a fast-paced, high-precision environment and are ready to lead from the floor, this is your opportunity to make a measurable impact. Position Summary The Second Shift CNC Team Lead is a working leadership role responsible for supporting machinists, ensuring quality compliance, shift scheduling, adherence, and maintaining shop floor discipline during second shift operations. This individual will lead by example through technical expertise and strong communication. Key Responsibilities Lead and support second shift machinists in daily production activities Set up and/or operate complex CNC lathe and milling machines as needed Troubleshoot machining, tooling, and quality issues in real time Ensure adherence to drawings, operation sheets, and GD&T requirements Oversee first piece and in-process inspections using standard measuring equipment Ensure proper documentation in ERP and completion of required quality records Coordinate with Engineering, Quality, and Planning to resolve issues quickly Maintain shift communication logs and provide clear handoff to first shift leadership Promote a culture of safety, accountability, and continuous improvement Support Lean initiatives and waste reduction efforts Requirements High School diploma or equivalent required 5+ years of CNC machining experience (Lathe and/or Milling) Multi-axis machining experience preferred Prior leadership or lead experience strongly preferred Aerospace or precision component manufacturing experience required Strong understanding of GD&T and blueprint interpretation Experience performing in-process inspections Lean manufacturing experience a plus Strong communication and team-building skills What We’re Looking For A hands-on leader who can balance production with quality A problem solver who keeps the shift moving forward Someone who can make sound decisions within defined guardrails A team builder who drives accountability and engagement Must Have: 5+ years of experience with CNC Set up and/or operate complex CNC lathe and milling machines, and able to troubleshoot machining, tooling, and quality issues in real time, within precision machining and component manufacturing environments, preferably aerospace/defense. Able to read and interpret blueprints, ensure adherence to drawings, operation sheets, and GD&T requirements. 4 and 5 multi-axis CNC machining experience, desired. U.S. Citizen, they are ITAR compliant. Able to maintain shift communication logs, scheduling of direct reports, and continuous improvement. Number of Direct Reports: 6 direct reports Training is on 1st shift (first 4 weeks): Monday-Friday (6-7AM to 3:30pm/4pm) Benefits: 401k employer matching 100% up to 6% 11 days PTO/Vacation 10 Honored Paid Holidays Tuition Reimbursement by Employer: up to $3,000/yr. 3 plans for Medical coverage Employer paid Life Insurance Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job DescriptionSummary: We are representing a well-established general contractor seeking an experienced MEP Project Manager to lead the mechanical, electrical, plumbing, and commissioning scopes for a high-profile commercial project. This role is ideal for a seasoned Mechanical or MEP Project Manager with a strong background in complex building systems who can manage the process from installation through startup and turnover. The ideal candidate is highly organized, technically proficient, and comfortable managing MEP coordination while driving communication between field teams, design professionals, commissioning agents, and ownership. Key Responsibilities: MEP & Commissioning Oversight * Serve as the primary point of contact for all MEP and commissioning scopes. * Coordinate with commissioning agents to track system readiness, startup, and punch list closure. * Conduct QA/QC spot checks on rough-ins and periodic system installations to ensure quality compliance. * Lead planning meetings with trade partners to maintain milestone progress and ensure sequencing efficiency. * Collaborate with design and field teams to resolve technical issues and design gaps. * Manage all MEP-related RFIs, submittals, and documentation for startup and closeout. Project Management * Oversee schedule, budget, and subcontractor performance for assigned scopes. * Manage buyout, change orders, and project billing while ensuring accurate forecasting. * Conduct jobsite walks and enforce safety compliance in coordination with the project team. * Lead progress meetings with owners, architects, engineers, and MEP subcontractors. * Maintain comprehensive records, logs, and communication reports throughout project execution. * Support warranty closeout and ensure complete turnover packages upon completion. Qualifications: * Bachelor’s degree in Construction Management, Engineering, or a related field; equivalent experience accepted. * 10+ years of MEP or mechanical project management experience in commercial construction. * Strong understanding of HVAC, electrical distribution, plumbing systems, and building automation controls. * Experience with commissioning coordination and large-scale mechanical systems. * Proven ability to manage projects up to $50M in value. * Proficiency in Microsoft Office and construction management tools. * Excellent communication, leadership, and client-facing skills. * Local travel flexibility based on project needs. Compensation + Benefits: * Competitive salary based on experience. * Comprehensive medical, dental, and vision coverage. * 401(k) with company match. * Paid time off, holidays, and performance-based bonus opportunities. * Company vehicle allowance and professional development support.

Job Description ABOUT INSPIRE MEDICAL SYSTEMS Inspire is the first of its kind medical device designed to make a difference in the lives of those living with Obstructive Sleep Apnea (OSA). We are revolutionizing the sleep industry with our FDA-approved medical device, designed to reduce OSA severity for those who cannot tolerate or get consistent benefit from CPAP. Inspire Medical Systems is committed to enhancing patients' lives through sleep innovation. We are steadfast in our commitment to prioritize patient outcomes, act with integrity and lead with respect. With positive persistence at our core, we are committed to all those we serve. WHY JOIN OUR FAST-GROWING TEAM At Inspire, we value people – your diverse experiences, backgrounds, and thoughts. We elevate voices and encourage learning opportunities to build a professional network that grows into community. We embrace a people-first culture by offering excellent benefits, 401k matching, ESPP, flexible time off (FTO), and tuition reimbursement. If you're passionate about making a difference in people's lives and want to work with innovative technology, come be a part of our great team! ESSENTIAL JOB FUNCTIONS The Regional Manager will lead all aspects of the commercial development of Inspire Therapy to treat Obstructive Sleep Apnea (OSA) in a defined geographic region. The Regional Manager will hire exceptional sales and clinical support talent. Execute the commercial plan consistent with Inspire's stated objectives. OPPORTUNITIES YOU WILL HAVE IN THIS ROLE • Work with Area Vice President of Sales to assess, select, and train new medical centers who want to offer Inspire therapy., • Hire a sales and technical support team that have skills and attributes to meet and exceed business and quality objectives., • Establish a vibrant and performance-based culture within the regional sales team., • Drive a consistent approach to build flow of interested and appropriately indicated patients into trained medical centers within the region., • Establish and implement best practice sharing within the region to aid in achieving the projected sales and PET (Patients Expecting Therapy) quotas., • Work closely with Therapy Awareness Managers, Marketing, Reimbursement Team and Sales Operations to promote and maintain the highest possible relationships with our external customers and in-house team., • Develop and provide coaching and feedback (sales, communication, clinical expertise, etc.) to all members of regional team., • Ensure comprehension and timely completion of Inspire Quality System policies and procedures. WHAT YOU CAN BRING TO OUR GREAT TEAM Required • Bachelor's degree - preferably in a technical/scientific field or business/communications., • Minimum of 5+ years in a field sales leadership role within medical and/or pharmaceutical industry., • Successful track record building high-performing teams who consistently outperform expectations., • Strong communicator and leadership presence. Preferred • MBA., • Prior experience leading teams with disruptive technologies. #LI-Remote The salary for this position will be offered at a level consistent with the experience and qualifications of the candidate. This information reflects the anticipated salary range for this position at the time of posting. The salary range may be modified in the future and actual compensation may vary from the posting based on various factors such as geographic location, work experience, education and/or skill level. Salary$135,000—$150,000 USD BENEFITS AND OTHER COMPENSATION Inspire offers a highly competitive benefits package including (general description of the benefits and other compensation offered): • Multiple health insurance plan options., • Employer contributions to Health Savings Account., • Dental, Vision, Life and Disability benefits., • 401k plan + employer match., • Identity Protection., • Flexible time off., • Tuition Reimbursement., • Employee Assistance program., • All employees have the opportunity to participate in the ownership and success of Inspire. Employees at all levels can participate through equity awards and the Employee Stock Purchase Program. Inspire Medical Systems provides equal employment opportunity (EEO) to all employees and applicants without regard to race, color, religion, creed, sex, national origin, age, disability, marital status, familial status, sexual orientation, status regarding public assistance, membership or activity in a local commission, military or veteran status, genetic information, pregnancy or childbirth, or any other status protected by applicable federal, state, and local laws. This policy applies to all aspects of the employment relationship, including recruitment, hiring, compensation, promotion, transfer, disciplinary action, layoff, return from layoff, training, and social and recreational programs. Inspire Medical Systems complies with applicable laws governing non-discrimination in employment in every location in which Inspire Medical Systems has facilities. All such employment decisions will be made without unlawfully discriminating on any prohibited basis. Inspire Medical Systems is an equal opportunity employer with recruitment efforts focused on ensuring a diverse workforce. Applicants with a disability that need accommodation to complete the Inspire Medical Systems application process should contact Human Resources at 844-672-4357 or email careers@inspiresleep(dot)com Inspire Medical Systems participates in E-Verify.

Job DescriptionSummary: We are representing a well-established general contractor seeking an experienced MEP Project Manager to lead the mechanical, electrical, plumbing, and commissioning scopes for a high-profile commercial project. This role is ideal for a seasoned Mechanical or MEP Project Manager with a strong background in complex building systems who can manage the process from installation through startup and turnover. The ideal candidate is highly organized, technically proficient, and comfortable managing MEP coordination while driving communication between field teams, design professionals, commissioning agents, and ownership. Key Responsibilities: MEP & Commissioning Oversight * Serve as the primary point of contact for all MEP and commissioning scopes. * Coordinate with commissioning agents to track system readiness, startup, and punch list closure. * Conduct QA/QC spot checks on rough-ins and periodic system installations to ensure quality compliance. * Lead planning meetings with trade partners to maintain milestone progress and ensure sequencing efficiency. * Collaborate with design and field teams to resolve technical issues and design gaps. * Manage all MEP-related RFIs, submittals, and documentation for startup and closeout. Project Management * Oversee schedule, budget, and subcontractor performance for assigned scopes. * Manage buyout, change orders, and project billing while ensuring accurate forecasting. * Conduct jobsite walks and enforce safety compliance in coordination with the project team. * Lead progress meetings with owners, architects, engineers, and MEP subcontractors. * Maintain comprehensive records, logs, and communication reports throughout project execution. * Support warranty closeout and ensure complete turnover packages upon completion. Qualifications: * Bachelor’s degree in Construction Management, Engineering, or a related field; equivalent experience accepted. * 10+ years of MEP or mechanical project management experience in commercial construction. * Strong understanding of HVAC, electrical distribution, plumbing systems, and building automation controls. * Experience with commissioning coordination and large-scale mechanical systems. * Proven ability to manage projects up to $50M in value. * Proficiency in Microsoft Office and construction management tools. * Excellent communication, leadership, and client-facing skills. * Local travel flexibility based on project needs. Compensation + Benefits: * Competitive salary based on experience. * Comprehensive medical, dental, and vision coverage. * 401(k) with company match. * Paid time off, holidays, and performance-based bonus opportunities. * Company vehicle allowance and professional development support.

Job Description *Applicants MUST submit a cover letter with resume to be considered. *This position will require in-office presence. Hybrid work schedules may be possible based on specific job duties and consistent with ESD policy. *Minorities, women, and individuals with disabilities are encouraged to apply. Please contact Human Resources if you require an accommodation. BASIC FUNCTION: The Senior Project Manager will be a dynamic, highly organized, and experienced professional responsible for the end-to-end management, administration, and execution of multiple, complex planning, economic development, and real estate development projects essential to GO-SEMI’s strategic initiatives. The core objective of this role is to significantly expand site readiness and bolster the semiconductor supply chain across New York State. This requires ensuring a portfolio of projects—from initial planning and site acquisition to infrastructure build-out and regulatory approvals—are delivered on scope, on time, and within budget, successfully navigating a landscape of numerous interdependencies and diverse public/private stakeholders. The Senior Project Manager is expected to operate with a high degree of autonomy, serving as a central nexus for project information and coordination. They will act as the principal liaison between the Assistant Vice President (AVP) of Planning and all external parties, including consultants, legal counsel, developers, community groups, and all levels of government (federal, state, and local agencies). Success in this role hinges on the ability to proactively identify, map, and mitigate systemic risks and interdependencies inherent in large-scale, politically sensitive development projects. WORK PERFORMED: • Oversee and manage specific projects or initiatives as delegated by the AVP., • Coordinate cross-functional teams to ensure project milestones, objectives and schedules are achieved., • Prepare and facilitate regular meetings and communications with ESD leadership, agency partners, and project stakeholders, including preparing agendas, taking minutes, and following up on action items., • Provide project-specific oversight, guidance and schedule tracking for federal/state/local environmental reviews, permits, and approval processes, identifying potential issues and proposing solutions to keep projects on track., • Assemble, curate and manage information systems, such as databases, site inventories, GIS mapping, project management software and custom project trackers., • Prepare and review documents, reports, project schedules and presentations for accuracy and completeness., • Review and synthesize technical data and reports related to community planning, zoning, site development, real estate and infrastructure systems., • Support the AVP in the development and implementation of GO-SEMI/ESD strategic projects and initiatives., • Collaborate with the AVP to identify opportunities for improvement and innovation within the office., • Drive the development of new technological, data collection/management and information sharing initiatives in response to shifting strategy and opportunities., • Other projects and duties as assigned by the Executive Director. MINIMUM REQUIREMENTS: Education Level Required: Bachelor’s degree in urban planning, business administration, management, or a related field (master’s degree preferred). Associate’s degree with 7 years direct, relevant experience may substitute. Relevant Experience required: A minimum of five (5) years of experience required. Proven experience in a leadership or administrative role, preferably in economic development, real estate development or urban planning. Strong organizational and time-management skills, with the ability to manage multiple priorities. Experience working with architecture, engineering and planning consultant industry desired. Knowledge Required: Excellent written and verbal communication to skills including ability to communicate clearly in public settings, is critical. High competency in using Microsoft Office (Word, Excel, Access, Outlook & PowerPoint). Proficiency in ArcGIS and project management software (e.g Monday.com). Demonstrated ability to work independently and collaboratively within a team. Strong attention to detail and independent follow-through are highly important. High level of discretion and confidentiality. This position will work closely with the AVP and other senior ESD leaders to support overall success of the GO-SEMI office. ALTERNATE MINIMUM REQUIREMENTS FOR INTERNAL CANDIDATES: A minimum of 5 years of satisfactory service in another (relevant) position with Empire State Development. Up to 2 years of accredited post-secondary education, or service in the U.S. military may be substituted for service at ESD.

Job DescriptionWelcome to T-Mark Plumbing, Heating, Cooling, and Electrical, where passion meets purpose, and every day is an opportunity to make a difference. From the moment you step into our world, you'll feel the warmth of our family-like atmosphere and the pride that comes with being part of something truly special. For decades, we've been at the forefront of delivering exceptional service and exceeding customer expectations, with our unwavering commitment to 100% customer satisfaction driving everything we do. Our legacy of excellence is not just a badge of honor – it's a promise we make to each other and to our customers. We're currently seeking skilled Plumbers to join our tight-knit family. As a Plumber on our team, you'll have the opportunity to showcase your expertise, tackle exciting projects, and make a real difference in the lives of our customers. From installing new plumbing systems to diagnosing and fixing issues and everything in between, you'll be at the forefront of delivering top-notch plumbing services that our customers can rely on. As a Service Plumber at T-Mark, you will play a pivotal role in our mission to provide unparalleled plumbing solutions that prioritize the well-being and satisfaction of our customers. Your technical expertise, dedication to excellence, and customer-centric approach will contribute to our commitment to delivering exceptional residential plumbing services.As a T-Mark Plumber your responsibilities will include: • Provide clear explanations and educate customers about their plumbing systems, offering preventive maintenance tips and energy-saving recommendations., • Diagnosing and troubleshooting plumbing issues, recommending appropriate solutions and discussing options with customers. Identify opportunities for upselling and cross-selling additional services, products, or maintenance plans to customers during service visits., • Achieving a best-in-class first-time fix rate by accurately diagnosing issues, arriving fully prepared with necessary tools and parts, and effectively completing repairs during the initial service call., • Keeping track of service vehicle inventory and parts stock, ensuring accuracy and minimizing unnecessary expenses due to missing or overstocked items., • Maintaining accurate and up-to-date records of service calls, work performed, and parts used in the Service Titan platform., • Collaborating effectively with team members, sharing knowledge and assisting colleagues as needed. Strive to maintain a positive team dynamic and contribute to a supportive work environment., • Upholding professional communication and appearance at all times when interacting with customers to ensure a five-star customer service experience., • Maintaining a consistent record of punctuality and attendance, arriving at scheduled appointments on time and adhering to the assigned work schedule., • Additional duties as assignedWe don't just offer jobs—we build careers. Here’s why you’ll love being part of our team:, • Industry-Leading Compensation: We believe in rewarding excellence., • Fully Stocked Warehouse: We ensure you have the tools and support you need to excel, with a fully stocked warehouse., • Clean Fully Stocked Truck: We provide a clean, fully stocked take home truck that’s ready for any job., • Comprehensive Health Benefits: We offer health, dental, and vision insurance to keep you and your family covered., • Paid Time Off Starting Day 1! We believe in the importance of rest and relaxation, so you start earning paid time off from your first day., • 401(k) Plan: Secure your future with our competitive 401(k) plan, including a generous company contribution., • Parental Leave: We support our team members through all stages of life, including offering parental leave for new parents., • Tool and Boot Allowance: We provide a tool and boot allowance so you have the best tools to get the job done., • Training and Development Opportunities: We’re committed to your professional growth with training through our Service Professionals Academy and Resource Center!

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. This strong leader will support various marketing functions and is a highly self-directed individual. As a senior marketing coordinator, you will work independently and in groups to lead pursuits, proposals, SOQs, and interview preparations, as well as collaborate on complex sales and marketing projects. You will work closely with individuals at all levels, including senior leadership locally and nationally. Senior Marketing Coordinator Position Responsibilities: • Lead the planning, development, and submission of proposals, qualifications packages, and RFP/RFQ responses, managing multiple concurrent deadlines and priorities., • Analyze solicitation requirements and evaluation criteria to ensure all submissions are accurate, compliant, and strategically positioned., • Support pursuit strategy activities, including go/no‑go assessments, content planning, and opportunity tracking., • Collaborate with technical teams, leadership, and consultants to develop persuasive written content, scopes of work, and fee information., • Oversee proposal production, including layout, editing, and preparation for digital and/or print delivery to ensure timely submission., • Create and coordinate proposal graphics—including charts, infographics, layouts, and visual brand elements—to communicate technical concepts clearly and enhance visual impact., • Prepare short‑list interview materials, including presentation decks and visual aids, and assist with rehearsal sessions and interview coaching as needed., • Coordinate marketing activities such as advertising, direct mailing, event planning, award submissions, and conferences., • Develop, maintain, and improve proposal resources such as boilerplate materials, resumes, project descriptions, templates, and graphic standards., • Support marketing and sales strategy development and work with regional teams to identify marketplace needs., • Attend conferences and client meetings/debriefs as necessary., • Maintain systems and tools to enhance efficiency and effectiveness., • Bachelor’s degree in marketing, business, communications, or English, with 5-7 years of relevant experience., • Experience in creating and coordinating proposals., • Strong writing, editing, formatting skills, and attention to detail., • Ability to multitask, prioritize, and work independently or in teams under tight deadlines., • Excellent interpersonal and communication skills., • Proficiency in Adobe InDesign, Photoshop, Illustrator, and Microsoft Office. $70,000 - $100,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description At C&S Companies, we believe a supportive work environment, strong culture, and opportunities to grow are essential to a rewarding career. Our size allows us to provide guidance and resources without the bureaucracy of a large corporate environment. We foster a collaborative, inclusive, and employee-focused workplace built on integrity, trust, accountability, and fun. This commitment extends to our Internship Program, which gives college students hands-on experience applying their technical studies and learning the ins and outs of the A/E industry. Interns take on meaningful projects that complement their academic work, helping them transition smoothly from student to professional. Transportation Project Intern We are currently seeking Summer 2026 interns to join our Transportation Team. Responsibilities include: • Perform, under close supervision, routine aspects of civil engineering and construction management requiring knowledge and application of principles learned in course of study., • May use computer-assisted engineering software and equipment to perform tasks., • Collect and prepare data for evaluation, • Assist in the coordination of projects from the design phase all the way through construction. Must have completed freshman year of a degree program in Civil Engineering or Construction Management. Required Knowledge/Skills/Abilities • Strong desire to pursue a career in civil engineering or construction management., • Solid analytical, conceptual, and problem solving skills., • Resourceful and self-motivated., • Solid organizational skills with a focus on details., • Working knowledge of Microsoft Office., • Experience with AutoCAD preferred., • Strong written and verbal communication skills., • Ability to work and thrive in a team environment., • Ability to effectively interface with all levels of personnel and management. Estimated Compensation Range and Benefits $17.00 – 23.00/hr.* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionJob Description: Isaac Heating & Air Conditioning is seeking an experienced Commercial Install Plumbing Mechanic for their Rochester Location. An ideal candidate should have a background in commercial plumbing, demonstrating proficiency in executing repairs and maintenance tasks with meticulous attention to detail. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Work with install teams to complete installation of plumbing systems at commercial project sites, • Independently perform installation of commercial plumbing equipment and piping in accordance with company requirements, manufacturer specifications and industry standards, • Maintain extensive knowledge of commercial plumbing equipment and piping, • Layout and properly install underground plumbing systems, • Provide accurate as-built drawings to Project Managers, • Perform and participate in onsite equipment start-ups, • Maintain accountability for condition of company tools onsite, • Maintain constant communication with Project Managers and Field Supervisors to ensure project schedule and client needs are being met, • Perform other duties as assigned by your manager Job Qualifications: • High school diploma or equivalent required, • Minimum of 5 years of experience in plumbing required, • OSHA 10 certification will be required upon hire, • Valid driver’s license / clean driving record Competencies: • Excellent written, verbal, and active listening skills, • Exceptional customer service skills, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer-focused, • Problem-solving skills What can we offer you? • Medical, dental, and vision insurance, • Competitive base pay, • Paid vacation and sick time, • Paid holidays, • 401k retirement plan, • Tool Allowance The starting base range for this position is $30 to $40 per hour based on experience. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state, or local law.

Job DescriptionSalary: $50k - $65k POSITION DESCRIPTION: The Videographer plays a key role in shaping the visual storytelling of the brand by capturing and producing compelling video content that showcases tools in action, highlighting product innovation, and supporting marketing activities across North America. They collaborate closely with the marketing, creative, and product teams to create content for social media, digital platforms, events, and retail support. Through hands-on production and post-production, they elevate brand presence and reinforce the companys positioning as an industry leader. ROLES & RESPONSIBILITIES: Video Production & Filming: • Shoot high-quality footage of tools in use, testimonials, and product demonstrations in studio and on-location settings., • Edit raw footage into finished video content for various marketing channels., • Work with stakeholders to plan storyboards, shot lists, and schedules., • Maintain a consistent visual identity and tone across all video assets., • Collaborate with the marketing team to align video content with campaign objectives., • Capture hands-on tool usage to create engaging and educational content for end users., • Produce short-form videos optimized for platforms like Instagram, YouTube, and TikTok., • Maintain a well-organized library of video files, project assets, and raw footage., • Film at trade shows, jobsite visits, and internal events to capture brand experiences., • Partner with design, marketing, and product teams to understand content needs., • Provide creative direction and technical insight during project briefings and reviews. SKILLS & EXPERIENCE: • Proficiency in video production tools (DSLRs, mirrorless cameras, lighting, audio)., • Expertise in editing software (Adobe Premiere Pro, After Effects, Final Cut Pro)., • Strong understanding of framing, lighting, and audio for field and studio environments., • Ability to manage multiple projects with tight deadlines and changing priorities., • Experience shooting product and lifestyle content in industrial or rugged settings preferred., • Strong storytelling instincts with a passion for craftsmanship and tools., • Ability to lift and transport gear and work in physically demanding environments., • Knowledge of social video formats and platform requirements., • Excellent communication and teamwork skills., • 2+ years of experience in videography, preferably within a product, brand, or agency context.

Job Description We are seeking a highly skilled and motivated individual to join our team as a Program Manager. The ideal candidate will have a strong engineering background, experience in quality management, and excellent communication and leadership skills. The Program Management Services Division at LaBella provides comprehensive management services for complex projects and multi-year capital programs. Project teams are established to provide a customized mix of business consulting, project management, financial control and monitoring, administrative, and technical support services. Salary Range: $100,000-$144,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Duties: • Contractor & Stakeholder Coordination: Act as the primary point of contact for coordinating Avangrid objectives across contractor projects. Facilitate communication between internal stakeholders, field teams, and external partners to align project delivery with corporate goals., • Performance Metrics: Focus on SPI (Schedule Performance Index) and CPI (Cost Performance Index) as primary decision drivers., • Oversight of scheduling/cost controllers and activities. This person will work with SMEs, estimators and procurement present accurate project budgets., • Preparing and completing action plans; implementing and reporting on production, productivity, quality, and customer-service standards; identifying risks, resolving problems; completing audits; identifying trends; determining improvements; implementing change., • Meets AVANGRID objectives by preparing Program/Project Initiation and Program/Project Management Plans, executing plan requirements, analyzing variances; initiating corrective actions., • Development of On Boarding, Training and Resource Retention Plan, • Achieve efficiencies by accepting responsibility and accountability for results, accomplishing new and different requests; exploring opportunities to add value to the AVANGRID organization., • Develop and execute a program evaluation framework to assess the strengths of the program and to identify areas to target for improvement., • Cross-Project Integration: Assess overall priorities and define critical dependencies between operational needs and infrastructure upgrades, ensuring appropriate prioritization and integration. Requirements Hard Skills: • 10 years or more in large scale projects Program Management for Utility business;, • Bachelor’s degree in Engineering, MBA preferred., • Program Management Professional Certification (PgMP) or Project Management Professional (PMP) Certification, • Proficient in Microsoft Project, Excel, PowerPoint, and Word., • Minimum five (5) years in Oil or Gas Infrastructure (Transmission, Distribution, or Metering)., • Exposure or experience with operational technologies such as SCADA or RTU systems is preferred. Soft Skills: • Excellent communication skills, capable of working effectively with different departments., • Strong leadership abilities., • Problem-solving and analytical thinking., • Ability to work independently and as part of a team. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Paid Media Manager The Opportunity: Soleo Communications is seeking an innovative, self-motivated individual with strong communication and project management skills to join our Digital Marketing Team. As the Senior Paid Media Manager, you will be responsible for the development and execution of a multi-channel paid media marketing plan for Soleo’s owned and operated digital brands, including RateRetriever.com. This a unique opportunity to take on a leadership role within the organization and contribute to initiatives that are core to Soleo’s strategic growth plan. Our ideal candidate possesses 5+ years of experience managing paid campaigns with over $100k in monthly ad spend. You should have a firm grasp of how to leverage paid search and other paid channels including display, video, and social media to formulate a comprehensive digital marketing strategy that will drive scalable growth and brand awareness for each of our brands. You should understand what it takes to compete for some of the most competitive keywords and have mastered best practices around account structure, campaign types, automated bidding strategies and conversion tracking. The ability to communicate complex strategies and provide data-driven performance updates to the Executive Team is essential to your success. Responsibilities: • Campaign Strategy: Develop a comprehensive paid media and digital marketing strategy for Soleo’s owned and operated digital brands. Be prepared to think differently and introduce creative solutions for driving brand awareness on a fixed budget., • Media Buying: Leverage your understanding of customer needs, performance KPIs and compliance requirements to develop scalable lead generation strategies that deliver on ROAS targets. Campaigns will include paid search as well as other channels like affiliate, display, email, and more, depending on factors like goals and budget., • Brand Awareness Strategy: Assist in developing a strategy for ongoing brand awareness to support organic traffic growth in addition to paid traffic., • Forecasting + KPI Tracking: Assist the executive team in developing forecasts, performance targets, and a standard set of KPIS to be monitored across all of Soleo’s owned and operated digital brands., • CRO: Partner closely with other members of the digital marketing team to ensure that content and landing page design is consistent with the paid media strategy ensuring an excellent consumer experience and converstion rate optimization. Be prepared to share feedback and suggestions for CRO based on campaign performance., • Testing: Create and maintain a log of A/B tests to validate digital marketing strategies and continuously optimize performance. Report results to executive leadership., • Research + Planning: Utilize online tools and other resources to conduct keyword and competitive research, identify growth opportunities, and stay on top of key industry trends.Position Requirements:, • Bachelor’s degree, with related experience in the marketing/advertising field, • 3+ years experience directly configuring, and optimizing, paid search campaigns with both low budget ($5k $10k/month) and medium budget ($25k-$50k/month) constraints., • 3+ years of media buying experience and exposure to all the major platforms including Google, Microsoft, Facebook, Instagram, TikTok, LinkedIn, etc, • Strong project and performance management skills including the ability to delegate work and provide constructive feedback, • Solid understanding of paid search best practices including:, • Experience writing effective search ad copy, • Experience identifying testing opportunities and implementing experiments, • Ability to audit and uncover account performance or technical issues, • Knowledge of automated bidding strategies including smart bidding, • Knowledge of new campaign types including dynamic search and performance max, • Proven experience with Brand Awareness campaigns targeted specifically at growing visitors to web properties, • Experience with 3rd party and SEM Tools (SEMrush), • Experience using Google Analytics and Google Tag Manager to configure conversion trackingAbout Soleo: Soleo is a leader in performance marketing. We are a well-established and trusted partner and technology innovator in the industries we serve. With over 20 years of experience, we have earned our reputation by building world-class platforms, maintaining the highest standards of compliance, being selective about our suppliers, and providing best-in-class customer support. Powered by JazzHR yccX9pxQ3n

Job DescriptionSalary: $20-23 Apprentice In-Home Service Professional Wanted Are you good with your hands? Like computers and other technology? Always had an interest in how things work? Do you enjoy interacting with people and delivering great customer service? If so, our company is looking for you. As a professional and motivated apprentice you will learn the skills of an appliance service technician. After successfully completing our training program, you will be assigned a vehicle to run calls solo beginning a strong career as an appliance technician. Extended, industry specific technical training is provided to qualified individuals. The area covered is Monroe and surrounding counties. We provide: *A GREAT WORK ENVIRONMENT * HEALTHCARE * RETIREMENT PLAN * VEHICLE * UNIFORMS *CELL PHONE. * MOST DAYS TECHNICIAN STARTS AND ENDS AT HOME WITHOUT OFFICE VISIT. QUALIFICATIONS: Previous experience working on major appliances or related schooling (HVAC) is a plus but not necessary. EPA certification a plus Excellent verbal and written communication skills Excellent customer service skills Clean driving record and a valid New York driver's license (company vehicle provided) Formal Appliance Service Training is a plus Must be willing to submit to a formal background check to include drug test, DMV, and Criminal Background check Duties and Responsibilities: Paying close attention to customer service, the In Home Service Professional will learn to evaluate, troubleshoot, repair and test all types and brands of appliances including washing machines, dryers, refrigerators, stoves/ovens and dishwashers. If you want to enjoy your work environment while providing excellent customer service then apply today.

Job Description Christa Construction – Customer Satisfaction through Quality, Service, and Value!! Christa promotes an environment of professional development and creative thinking that demonstrates our commitment to hiring and retaining the best people in the industry. Our team comes first, it’s known through our multiple awards such as Greater Rochester Chamber Top 100 Companies and Rochester’s Top Workplaces. As an employer, we’re focused on your growth in the company. From leadership development programs, state-of-the-art technology and an open-door policy to learn from each other, you own your personal growth and impact in the company as well as your career. We thrive on our outstanding client service and expertise. We are trying to ensure we are bringing the right kind of individual to join our team. • Does your work ethic typically outshine the ones around you?, • Do you know that you have the skills to impress, and the drive to deliver the highest quality in every situation?, • Is your history bursting with examples of your personal and professional success?, • Are you ready to catapult your career alongside the top professionals in the business?, • Are you the next best thing to happen to Christa? Let’s chat and see! Core Values: Christa’s Core Values inform our decisions and actions at all levels. They serve as ‘guard rails’ for behavior between employees, clients, subcontractors, suppliers, and other stakeholders. Communicating Christa’s Core Values and ensuring everyone internalizes them is essential to fostering and maintaining our amazing culture. Christa cares about: • Integrity: Clients, suppliers, employees, and communities we serve know we build with integrity., • Safety: We prioritize safety every day, on every job site., • Ownership mindset: We are responsible for our actions and accountable for results. Treat every project like it is your own., • Quality: We build every project with quality, exceptional service, & innovative construction methods., • Communication: We understand clients’ expectations, then deliver with clarity and transparency to the entire project team., • Balance: We are committed to hard work, balanced with creating time for family, friends, and fun. How will working for Christa benefit you? Not only will you be a part of a wonderful team of industry-leading professionals, but Christa offers great benefits including: Health Dental and Vision, generous 401K matching, PTO, Life & LTD, Tuition Reimbursement, Career Training and Development support, Valuable experience, and more! A successful Project Manager at Christa will provide project leadership while promoting Customer Satisfaction through quality, service and value. ESSENTIAL FUNCTIONS: • Supervises and directs the overall project. Duties include planning and coordinating activities with others; circumventing/resolving problem areas; and ensuring all company/project policies, procedures, and standards are maintained., • Achieves customer satisfaction by meeting or exceeding customer expectations. Customers include owners, architects, contractors, subcontractors, vendors, and employees., • Manages, directs, organizes, coordinates, and schedules the work of staff in their respective corporate divisions, • Ensures that projects are being managed effectively and are effectively operated, • Is responsible for the profitability of assigned projects and the completion of work per schedule and utilizes corporate standard operating procedures to accomplish this goal, • Solicits, purchases, writes, and manages contracts, contractors, and vendors in the execution of work, • Responsible for developing the financial schedule of values inclusive to the overall project budget., • Prepares and distributes payment applications on a monthly basis, • Tracks all project costs and prepares monthly cost to complete reports, • Cost codes all project invoices, • Solicits, procures, and manages the labor, material, and equipment necessary to execute the work of several projects, • Actively participates in the solicitation and procurement of new and future employees, • Ensures that standard administrative operating procedures are being complied with, • Creates, updates, and monitors construction schedules using Microsoft Project and adheres to company scheduling standards and practices, • Creates and submits all project RFIs and submittals, • Prepares and distributes all project meeting minutes, • Manages and maintains all changes to projects by posting drawings, updating Project Sight and creating as-built drawings, • Manages the closeout process at the end of projects to submit to appropriate parties, • Trains, mentors, and motivates the Assistant Project Manager and/or Project Engineer assigned to their projects QUALIFICATIONS & RESPONSIBILITIES: Top candidates will have 5-10 or more years of commercial construction project management experience (preferably in wood frame multi-family projects) and should be able to lead multiple projects. They will also take ownership of the project success with special consideration to schedule and budget adherence, and have the personal attributes to manage, direct, mentor and support employees through their daily work while demonstrating Christa’s corporate philosophy of outstanding business ethics and principles. Top candidates will also have advanced skills in the use of technology including MS Office products, PROCOR, and P6/Oracle. Advances skills in comparable programs will be considered equivalent. Project Managers typically have a range of physical requirements, including: • Mobility: Ability to move around job sites, which may involve climbing stairs, ladders, or scaffolding., • Stamina: Capability to work long hours, often on-site, which can include standing for extended periods and walking significant distances., • Vision: Good eyesight for reading blueprints, plans, and safety signage, as well as inspecting work., • Hearing: Ability to hear instructions, warnings, and safety alerts in a noisy construction environment., • Manual Dexterity: While not as hands-on as other roles, project managers may need to use tools or equipment occasionally, so basic manual skills can be beneficial., • Strength: While not always required, some physical strength may be necessary for tasks like lifting or carrying equipment, especially during site visits., • Coordination: Good hand-eye coordination is useful for tasks that require writing, reviewing plans, or interacting with technology., • Safety Awareness: Understanding and adhering to safety protocols is crucial, as construction sites can pose various hazards. Compensation for qualified candidates is determined by multiple factors including but not limited to verifiable experience, education, and technical skills. The pay range for this position is: $55-$100k annually Nestled on the shores of Lake Ontario, Rochester, is a vibrant city known for its rich history, dynamic economy, and diverse cultural scene. With a legacy of innovation and a strong sense of community, Rochester is the perfect place to live, work, and explore. The city boasts a history of groundbreaking achievements in technology and industry. As the headquarters for several major companies, Rochester continues to thrive as a center for innovation, research, and development. Rochester’s diverse economy includes strong sectors in healthcare, education, manufacturing, and technology. The region offers numerous opportunities for businesses and entrepreneurs, supported by a collaborative environment and a skilled workforce. You can also experience the arts and culture of Rochester through its world-class museums, theaters, and music venues. The George Eastman Museum, Rochester Philharmonic Orchestra, and the Strong National Museum of Play are just a few highlights of what is offered. Rochester is also home to an array of parks and outdoor spaces, including the scenic Highland Park and the picturesque Genesee Riverway Trail. Enjoy outdoor activities, festivals, and seasonal events throughout the year. Finally, Rochester is renowned for its high-quality educational institutions. These institutions drive research, innovation, and a culture of learning. Company DescriptionAffordable housing and apartmentsAffordable housing and apartments

Job Description Registered Nurse (RN) / Nurse Surveyor - Rochester, NY (#25317) • Location: Rochester, NY, • Employment Type: Full-time, • Hourly Rate: $36.00 - $42.00/hr based on experience About Greenlife Healthcare Staffing: Greenlife Healthcare Staffing is a leading nationwide recruitment agency dedicated to connecting healthcare professionals with top-tier opportunities. We partner with hospitals, clinics, nursing homes, multi-specialty groups, and private practices to match talented individuals with roles that align with their skills and career goals. Position Overview: We are currently seeking a dedicated Registered Nurse (RN) to fill the role of a Nurse Surveyor. In this critical position, you will support the NYS Department of Health’s Center for Home and Community-Based Services by conducting regulatory surveillance and compliance inspections of licensed home care and community-based service providers. You will apply professional nursing judgment to evaluate compliance with federal and New York State laws, regulations, and standards. Working as part of an interdisciplinary survey team, your efforts will be essential to protecting patient safety and ensuring care quality across the Western New York region. Why Join Us? • Competitive Compensation: Competitive hourly rate of $36.00 - $42.00/hr based on experience., • Work Schedule:, • This is a full-time position, • Monday – Friday, • 8:00 AM – 5:00 PM, • Overtime: Not required, • Travel: As required for onsite surveys and investigations at assigned Homes / Communities, • Professional Growth: Gain valuable experience in regulatory compliance, investigative processes, and interdisciplinary collaboration within a supportive environment., • Impactful Work: Contribute to a mission-driven organization dedicated to improving patient outcomes by ensuring home care agencies meet the highest standards. Responsibilities: • Surveillance & Inspection Activities:, • Conduct onsite inspections of licensed Home Care Agencies within a 17-county Western New York region., • Participate in interdisciplinary survey team activities during inspections., • Review agency operations, clinical services, and documentation for regulatory compliance., • Evaluate services provided in patient homes, assisted living facilities, adult homes, and hospice residences., • Participate in meetings with team members and program leadership to discuss findings during and after inspections., • Compliance & Enforcement, • Assist in preparing Statements of Deficiencies in accordance with the Principles of Documentation., • Review agency's submitted Plans of Correction., • Conduct post-survey follow-up visits (onsite and offsite)., • Participate in investigations of complaints related to home care agencies., • Participate in enforcement actions, including testimony at hearings when required., • Administrative & Reporting Duties, • Review complaint intakes and supporting documentation., • Develop reports using applicable electronic systems and software., • Review applications for new licensed and certified agencies., • Review facility policies and procedures., • Prepare general correspondence and regulatory communications., • Participate in meetings, committees, and required trainings., • Medical Oversight Responsibilities:, • Apply nursing expertise to regulatory compliance evaluations., • Interpret and apply federal and New York State healthcare regulations., • Provide clinical insight to survey teams during inspections and investigations., • Support quality assurance and corrective action initiatives. Greenlife Healthcare Staffing - Empowering Healthcare Professionals, Enriching Lives Requirements Qualifications: • Education: Bachelor’s Degree in Nursing., • Licensure: Current Registered Professional Nurse (RN) license and registration to practice nursing in New York State., • Experience: Proven clinical nursing experience with strong analytical and investigative abilities., • Technical Skills: Proficiency in Microsoft Office Suite and electronic documentation systems; experience with complex data entry systems., • Soft Skills:, • Clinical nursing judgment applied to regulatory oversight, • Strong analytical and investigative abilities, • High-quality documentation and report writing, • Ability to manage multiple priorities independently, • Effective collaboration within interdisciplinary teams, • Professional communication with providers, stakeholders, and the public

Job Description Are you a dedicated and motivated personal trainer looking to make a significant impact on individuals' lives? We are actively seeking exceptional trainers to join our team and deliver personalized fitness experiences in the comfort of our clients' homes. Join us and be a part of a dynamic community that values your expertise, provides flexibility, and supports your professional growth. Join Our Team of Elite In-Home Personal Trainers – Empower Lives Through Fitness! Are you a certified personal trainer passionate about making a real impact? At Svetness, we bring clients to you—so you can focus on what you do best: helping people achieve their fitness goals. Why Train with Svetness? ✅ Flexible Scheduling – Set your own hours and choose the clients you want to work with. ✅ No Non-Compete – Train where and when you want-your career, your choice. ✅ Competitive Pay – Earn $35 to $45 per hour based on experience and client retention. ✅ Bonuses & Rewards – Get retention bonuses, plus client and trainer referral incentives. ✅ Liability Insurance – You're covered under our General Liability policy for peace of mind. ✅ Dedicated Support Team – Our concierge team handles scheduling and client requests so you can focus on training. ✅ Ongoing Education – Access free webinars, resources, and manager support to enhance your expertise. ✅ Exclusive Discounts – Enjoy 30% off fitness equipment, plus perks on meal prep, supplements, and more. ✅ No Sales Required – We provide a steady stream of clients—no need for marketing. ✅ Svetness App – Manage scheduling, track progress, and log sessions seamlessly. What You'll Do As a Certified Personal Trainer, you'll provide personalized, one-on-one and couples' fitness coaching in clients' homes, apartment gyms, or outdoor locations. 🔹 Design tailored workout programs based on client goals and assessments 🔹 Demonstrate exercises and ensure proper form, adjusting as needed 🔹 Track progress using the Svetness Fitness App, including session notes and reassessments 🔹 Maintain consistency with client appointments and scheduling 🔹 Travel to client locations (up to 45 minutes commute) What We're Looking For ✔ Certified Personal Trainer – Accredited by NCCA, DEAC, or NBFE ✔ CPR/AED Certified – Up-to-date certification required ✔ Experience – 1-3 years of personal training experience preferred ✔ Strong Communication Skills – Verbal, written, and technical ✔ Basic Nutrition Knowledge – Ability to guide clients on healthy habits ✔ Fitness Expertise – Comfortable with various training methods and equipment ✔ Physical Capability – Able to lift/push/pull up to 50 lbs. ✔ Personal Training Equipment – Ability to bring basic training tools as needed ✔ Reliable Transportation – Must be able to travel to client locations We take pride in our commitment to building an environment that embraces individuals from different genders, backgrounds, and ethnicities. Our organization values diversity and encourages candidates of all gender identities, backgrounds, and ethnicities to apply. We believe in creating an inclusive space where every individual feels welcome, respected, and valued. Join us in our mission to foster a workplace that celebrates the unique perspectives and experiences of our diverse team.

Job DescriptionJob Description: Isaac Heating & Air Conditioning is seeking an experienced residential Plumber for their Rochester, NY location. The ideal candidate will already have Plumbing and/or HVAC work experience and be able to perform repair/maintenance work in a thorough and accurate manner. Experienced Plumbers may receive a sign-on bonus of up to $5,000. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Perform repair and installation of plumbing fixtures, faucets, liners, and water heaters., • Perform emergency plumbing services, such as fixing leaks and burst/frozen pipes, • Performing plumbing related services to complement HVAC installations, • Diagnose and repair issues related to system performance or failure, • Continued communication with dispatch, management, and other relevant teams, • High school diploma or equivalent required, • 3-5+ years of experience in plumbing, • Valid driver’s license / clean driving record, • Excellent written, verbal, and active listening skills, • Exceptional customer service skills, • Ability to lift and move up to 50 pounds, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer focused, • Competitive base pay, • Comprehensive medical, dental, and vision insurance, • 401k retirement plan with company match, • Paid vacation and sick time, • Annual tool and uniform allowances The starting base salary range for this position is $30-$35 per hour. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. This employer participates in E-Verify to verify the employment eligibility of all new hires. E-Verify is a federal program that compares information from Form I-9 to government records to confirm employment eligibility. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status protected by applicable national, federal, state, or local law.