Traveling work jobs in Huntsville, AlabamaCreate job alerts

Looking for a change of scenery and a chance to help others. Join a traveling Physical Therapist role in Meridianville, AL at an outpatient clinic where you will help patients recover from injuries and manage chronic conditions while experiencing a new location. Apply now and a recruiter will reach out with more details. Minimum Requirements • Bachelor's, Master's, or Doctoral degree in Physical Therapy from an accredited program approved by the APTA., • Active Alabama PT license required to start the assignment., • BLS certification from AHA or ARC may be required prior to start., • Outpatient orthopedics experience preferred. This is preferred, not required., • Productivity expectation: ability to meet approximately 60 visits per week and see 12–14 patients per day. This is a client expectation., • Experience with double-booking follow-up visits preferred., • Ability to work up to 40 hours per week with a 36-hour guarantee. Overtime must be approved by the clinic director before being worked., • PTs only. PTA candidates will not be accepted., • First-time travelers and new graduates are acceptable. Assignment Details • Facility type: Outpatient clinic., • Shift: Days., • Schedule expectation: 36 hours guaranteed with the expectation of working up to 40 hours per week., • Patient population: Outpatient orthopedics., • Productivity expectation: approximately 60 visits per week; typically 12–14 patients per day with follow-up double-booking., • Overtime requires prior approval from the clinic director., • Floating to other clinics is not required. Location Highlights Meridianville, AL offers access to outdoor recreation and regional amenities within short drives. Wheeler National Wildlife Refuge is about 20 miles east, offering birdwatching and boat launches; Monte Sano State Park and downtown Huntsville are roughly a 25–30 minute drive, providing hiking, mountain biking, and cultural venues such as the Huntsville Museum of Art. The Tennessee River and Buzzard Roost Recreation Area are within 30 minutes, offering boating and lakeside trails for an adventurous lifestyle. Meridianville provides a suburban setting with convenient access to shopping and dining in Huntsville, and is approximately a 15–20 minute drive to the nearest major medical centers for professional networking. Benefits Designed for Travelers We value your time and service. Benefits include full medical options, 401(k) matching, recruiter support 24/7, referral bonuses, travel and license reimbursement, and housing assistance where applicable. Specific benefit enrollment details will be provided by your recruiter. EEO Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender, gender identity and expression, national origin, age, disability, or protected veteran status.

Vibra Travels is seeking a travel nurse RN Med Surg / Telemetry for a travel nursing job in Huntsville, Alabama. Job Description & Requirements • Specialty: Med Surg / Telemetry, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel VIBRA TRAVELS is looking for a CORPORATE TRAVEL REGISTERED NURSE to join our team. We look for nurses with acute care experience in ICU, step down, med surg/tele or Critical Illness Recovery Hospitals. Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment, • Local and Non-local positions available, • Competitive hourly rate in addition to tax-free stipend (if applicable), • No pay cuts mid-contract, • Referral bonus (up to $1000 per referral!), • License reimbursement if traveling to new state where new license is required, • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities Qualifications/Skills: • Required Certifications: BLS, ACLS, • State Licensure Requirements: AL RN or Multistate License, • Minimum year’s experience: 2+, • Required experience: vent experience; trach experience, • Diploma or Associate of Science Degree in Nursing required Additional Qualifications/Skills: • Previous acute care experience is strongly preferred., • Ability to project a professional image., • Knowledge of regulatory standards and compliance requirements., • Strong organizational, prioritizing and analytical skills., • Ability to make independent decisions when circumstances warrant., • Working knowledge of computer and software applications used in job functions., • Freedom from illegal use of and effects of use of drugs and alcohol in the workplace As an employee of Vibra Travels, you will be eligible to enroll in Medical and Prescription benefits once you meet the eligibility requirements outlined by the Affordable Care Act (ACA) What you see is what you get. We believe travel clinicians deserve full transparency. Every job we post includes a real pay range based on current bill rates. Before we submit you, we review the exact compensation package so there are no surprises later in the process Vibra Travels Job ID #20260520-57. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

Vibra Travels is seeking a travel nurse RN Wound Care for a travel nursing job in Huntsville, Alabama. Job Description & Requirements • Specialty: Wound Care, • Discipline: RN, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel "VIBRA TRAVELS is looking for a CORPORATE TRAVEL REGISTERED NURSE to join our team. We look for nurses with acute care experience in med surg. Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment, • Local and Non-local positions available, • Competitive hourly rate in addition to tax-free stipend (if applicable), • No pay cuts mid-contract, • Referral bonus (up to $1000 per referral!), • License reimbursement if traveling to new state where new license is required, • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities Qualifications/Skills: • Required Certifications: BLS, WCC preferred, • State Licensure Requirements: AR RN License or Compact License, • Minimum year’s experience: 1 Year minimum experience, • Required experience: 1 year Wound Care Certification, • Diploma or Associate of Science Degree in Nursing required Additional Qualifications/Skills: • Previous acute care experience is strongly preferred., • Ability to project a professional image., • Knowledge of regulatory standards and compliance requirements., • Strong organizational, prioritizing and analytical skills., • Ability to make independent decisions when circumstances warrant., • Working knowledge of computer and software applications used in job functions., • Freedom from illegal use of and effects of use of drugs and alcohol in the workplace As an employee of Vibra Travels, you will be eligible to enroll in Medical and Prescription benefits once you meet the eligibility requirements outlined by the Affordable Care Act (ACA) What you see is what you get. We believe travel clinicians deserve full transparency. Every job we post includes a real pay range based on current bill rates. Before we submit you, we review the exact compensation package so there are no surprises later in the process " Vibra Travels Job ID #20260527-13. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

Vibra Travels is seeking a travel nurse RN Long Term Acute Care for a travel nursing job in Huntsville, Alabama. Job Description & Requirements • Specialty: Long Term Acute Care, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel VIBRA TRAVELS is looking for a CORPORATE TRAVEL REGISTERED NURSE to join our team. We look for nurses with acute care experience in ICU, step down, med surg/tele or Critical Illness Recovery Hospitals. Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment, • Local and Non-local positions available, • Competitive hourly rate in addition to tax-free stipend (if applicable), • No pay cuts mid-contract, • Referral bonus (up to $1000 per referral!), • License reimbursement if traveling to new state where new license is required, • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities Qualifications/Skills: • Required Certifications: BLS, ACLS, • State Licensure Requirements: AL RN or Multistate License, • Minimum year’s experience: 2+, • Required experience: vent experience; trach experience, • Diploma or Associate of Science Degree in Nursing required Additional Qualifications/Skills: • Previous acute care experience is strongly preferred., • Ability to project a professional image., • Knowledge of regulatory standards and compliance requirements., • Strong organizational, prioritizing and analytical skills., • Ability to make independent decisions when circumstances warrant., • Working knowledge of computer and software applications used in job functions., • Freedom from illegal use of and effects of use of drugs and alcohol in the workplace As an employee of Vibra Travels, you will be eligible to enroll in Medical and Prescription benefits once you meet the eligibility requirements outlined by the Affordable Care Act (ACA) What you see is what you get. We believe travel clinicians deserve full transparency. Every job we post includes a real pay range based on current bill rates. Before we submit you, we review the exact compensation package so there are no surprises later in the process Vibra Travels Job ID #20260520-56. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

Vibra Travels is seeking a travel nurse RN ICU - Intensive Care Unit for a travel nursing job in Huntsville, Alabama. Job Description & Requirements • Specialty: ICU - Intensive Care Unit, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel VIBRA TRAVELS is looking for a CORPORATE TRAVEL REGISTERED NURSE to join our team. We look for nurses with acute care experience in ICU, step down, med surg/tele or Critical Illness Recovery Hospitals. Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment, • Local and Non-local positions available, • Competitive hourly rate in addition to tax-free stipend (if applicable), • No pay cuts mid-contract, • Referral bonus (up to $1000 per referral!), • License reimbursement if traveling to new state where new license is required, • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities Qualifications/Skills: • Required Certifications: BLS, ACLS, • State Licensure Requirements: AL RN or Multistate License, • Minimum year’s experience: 2+, • Required experience: vent experience; trach experience, • Diploma or Associate of Science Degree in Nursing required Additional Qualifications/Skills: • Previous acute care experience is strongly preferred., • Ability to project a professional image., • Knowledge of regulatory standards and compliance requirements., • Strong organizational, prioritizing and analytical skills., • Ability to make independent decisions when circumstances warrant., • Working knowledge of computer and software applications used in job functions., • Freedom from illegal use of and effects of use of drugs and alcohol in the workplace As an employee of Vibra Travels, you will be eligible to enroll in Medical and Prescription benefits once you meet the eligibility requirements outlined by the Affordable Care Act (ACA) What you see is what you get. We believe travel clinicians deserve full transparency. Every job we post includes a real pay range based on current bill rates. Before we submit you, we review the exact compensation package so there are no surprises later in the process Vibra Travels Job ID #20260520-59. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

Vibra Travels is seeking a travel nurse RN Acute Care for a travel nursing job in Huntsville, Alabama. Job Description & Requirements • Specialty: Acute Care, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Travel VIBRA TRAVELS is looking for a CORPORATE TRAVEL REGISTERED NURSE to join our team. We look for nurses with acute care experience in ICU, step down, med surg/tele or Critical Illness Recovery Hospitals. Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment, • Local and Non-local positions available, • Competitive hourly rate in addition to tax-free stipend (if applicable), • No pay cuts mid-contract, • Referral bonus (up to $1000 per referral!), • License reimbursement if traveling to new state where new license is required, • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities Qualifications/Skills: • Required Certifications: BLS, ACLS, • State Licensure Requirements: AL RN or Multistate License, • Minimum year’s experience: 2+, • Required experience: vent experience; trach experience, • Diploma or Associate of Science Degree in Nursing required Additional Qualifications/Skills: • Previous acute care experience is strongly preferred., • Ability to project a professional image., • Knowledge of regulatory standards and compliance requirements., • Strong organizational, prioritizing and analytical skills., • Ability to make independent decisions when circumstances warrant., • Working knowledge of computer and software applications used in job functions., • Freedom from illegal use of and effects of use of drugs and alcohol in the workplace As an employee of Vibra Travels, you will be eligible to enroll in Medical and Prescription benefits once you meet the eligibility requirements outlined by the Affordable Care Act (ACA) What you see is what you get. We believe travel clinicians deserve full transparency. Every job we post includes a real pay range based on current bill rates. Before we submit you, we review the exact compensation package so there are no surprises later in the process Vibra Travels Job ID #20260609-62. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

Job Description About Stampede Ventures, LLC Stampede Ventures provides a diverse portfolio of full-service construction, renovation, and civil work to meet the needs of Government and private sector customers. We leverage our experience to provide our customers with the best possible pricing and high quality service on all projects we perform. Our senior management team has more than 100 years of facility maintenance, repair, renovation and construction experience, primarily serving the U.S. Government. About this position: Traveling Construction Superintendent Location - Huntsville, AL The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position. Applicants will be notified via phone or email within ten (10) business days of submittal. Essential Duties & Responsibilities · Lead day-to-day field operations for one or multiple construction projects · Execute project scope, schedule, and plans in accordance with contract requirements · Coordinate and supervise subcontractors, vendors, and field personnel · Manage project sequencing, logistics, and site productivity · Track daily production, site costs, and schedule performance · Review and interpret drawings, specifications, and submittals · Prepare and manage RFIs, change orders, and field documentation · Conduct and participate in daily, weekly, and monthly project meetings · Ensure all work complies with contract documents, quality standards, and engineering practices · Enforce jobsite safety requirements and lead safety meetings, inspections, and audits · Maintain safety documentation and ensure compliance with OSHA and EM 385-1-1 standards · Serve as primary on-site point of contact for clients, inspectors, and stakeholders · Provide regular reporting on project status, progress, and risks · Resolve field issues, conflicts, and constraints in real time · Support project closeout, inspections, and final documentation Required (Minimum Necessary) Qualifications · Education Requirements: High School Diploma or equivalent · Level of Experience Requirements: 5+ years of construction experience, including experience as a Superintendent or Site Supervisor · Proven experience managing commercial, industrial, infrastructure, or federal construction projects · Ability to manage multiple subcontractors and concurrent projects or task orders · Strong ability to read and interpret plans, specifications, and technical documents · Experience with scheduling, cost tracking, and project reporting · OSHA 30 Certification (or ability to obtain upon hire) · U.S. Citizenship (if required by contract) · Ability to obtain base access and/or security clearance as required · Valid driver’s license and reliable transportation · Willingness and ability to travel up to 100%. Knowledge, Skills, Abilities, and Other Characteristics · Strong leadership and field decision-making capability · Effective communication with clients, subcontractors, and internal teams · Ability to manage multiple priorities in a fast-paced environment · Problem-solving and conflict resolution skills · Strong organizational skills and attention to detail · Working knowledge of construction methods, materials, and systems (civil, electrical, mechanical, etc.) · Proficiency with Microsoft Office and construction-related software · Ability to operate independently with minimal supervision · High level of professionalism, integrity, and accountability Preferred · Federal / DoD construction experience · Experience with RSMeans, Primavera, or similar project controls tools · First Aid / CPR Certification · EM 385-1-1 familiarity · Construction Quality Management (CQM) certification · Trade background (Electrical, HVAC, Mechanical, Civil, etc.). Supervisory Responsibilities · Supervisory responsibilities will be at the task order level and more project specific. DOT Covered/Safety-Sensitive Role Requirements · This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions. Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role. Employees must always maintain a constant state of mental alertness. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions require maintaining the requisite physical condition for bending, stooping, sitting, walking, or standing for prolonged periods of time. Most of the working time in this role is spent sitting, with frequent opportunities to move about. Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role. Employees must always maintain a constant state of situational awareness. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee often working in a construction environment. The employee is required to be on the job sites regularly and will be subject to lift and/or move up to 25 pounds. The employee is required to stand, climb or balance and stoop, kneel, crouch or crawl. The employee may be exposed to extreme cold or hot weather conditions while working on the jobsite. Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Job DescriptionDescription: The HVAC & General Property Maintenance Technician is a dual-skilled professional responsible for maintaining HVAC systems and performing a wide variety of general property maintenance tasks at multi-family residential properties. This role ensures tenant satisfaction by keeping properties functional, safe, and visually appealing while adhering to safety and compliance standards. Requirements: Key Responsibilities: HVAC Maintenance: • Inspect, troubleshoot, and repair HVAC systems, including furnaces, air conditioners, boilers, and heat pumps, ensuring optimal performance and energy efficiency., • Conduct preventive maintenance such as cleaning coils, replacing filters, lubricating components, and checking refrigerant levels per manufacturer specifications., • Respond promptly to HVAC-related maintenance requests, diagnose issues using diagnostic tools, and determine appropriate repair actions., • Install new HVAC systems or components, adhering to building codes and regulations., • Maintain accurate records of HVAC repairs, preventive maintenance, and inspections using maintenance management systems. General Maintenance and Repairs: • Perform plumbing, electrical, and mechanical repairs, including diagnosing and addressing system malfunctions., • Conduct carpentry tasks such as repairing or replacing doors, windows, cabinets, and flooring., • Address tenant maintenance requests promptly, prioritizing tasks based on urgency., • Perform painting and patching to maintain or enhance property aesthetics., • Ensure the proper upkeep of building systems and equipment, reporting any issues requiring specialized repairs. Groundskeeping and Landscaping: • Maintain the exterior of the property, including landscaping tasks such as mowing, trimming, and debris removal., • Handle seasonal maintenance like snow and ice removal and clearing walkways., • Safety and Compliance:, • Conduct regular inspections to identify hazards, ensure compliance with safety regulations, and mitigate risks., • Adhere to all local building codes and environmental standards., • Recordkeeping and Communication:, • Maintain detailed records of maintenance activities, materials used, and inspections performed., • Communicate effectively with property management, tenants, and team members regarding maintenance needs and project updates., • Other Responsibilities:, • Perform other duties as requested by the supervisor. Requirements: • High school diploma or equivalent; HVAC certification is required., • Proven experience in HVAC maintenance and general property maintenance., • Strong understanding of building systems, equipment, and repair techniques., • Proficiency in using diagnostic tools, hand tools, and power tools., • Ability to interpret technical manuals, schematics, and blueprints., • Strong problem-solving skills with attention to detail., • Excellent communication and interpersonal skills., • Physical ability to lift heavy objects, climb ladders, and work in varying weather conditions., • Valid driver’s license and a reliable personal vehicle for work tasks, including: Visiting tenant apartments for maintenance. Traveling between the property garage and job sites for parts and repairs. Procuring repair materials from local stores (e.g., Home Depot or Lowe’s). Mileage reimbursement provided per company policy for work-related travel. Compensation: Competitive salary with a generous benefits package. Job Type: Full-time Schedule: 8-hour shift & on-call rotation. Overtime: Responsibilities may involve Over-Time to meet the changing needs of the organization. #MT

Job Description GENERAL DESCRIPTION • The Aircraft Electrician is a key member of the maintenance and modification team, responsible for troubleshooting, installing, repairing, and maintaining electrical and avionics systems on rotary-wing and fixed-wing aircraft. This role may require up to 50% travel to support field maintenance and modification programs. Travel may be to various locations including overseas. When not traveling, the Aircraft Electrician will support various aviation maintenance programs, including routine inspections, troubleshooting, and upgrades on multiple aircraft platforms. DUTIES • Perform scheduled and unscheduled maintenance on aircraft electrical and avionics systems in accordance with manufacturer and service guidance., • Troubleshoot, diagnose, and repair wiring, lighting, power distribution, navigation, communication, and mission systems., • Install and route pre-terminated and custom wire harnesses, ensuring compliance with engineering drawings and schematics., • Remove, inspect, repair, and reinstall electrical and avionics components such as circuit breakers, connectors, antennas, sensors, and instruments., • Conduct pre-flight, post-flight, and routine inspections of electrical systems to ensure aircraft readiness., • Use technical manuals, blueprints, schematics, and DOD documentation for maintenance and troubleshooting., • Comply with engineering specifications, maintenance instructions, technical orders (TOs), and service bulletins., • Utilize specialized tools and diagnostic equipment to conduct fault isolation and system testing., • Perform modifications and upgrades, including new system integrations and software updates., • Execute post-maintenance operational checks and system functional tests to verify airworthiness., • Maintain accurate records and documentation of maintenance actions in compliance with applicable regulations., • Communicate technical concerns, progress updates, and scheduling constraints to supervisors and stakeholders., • Apply a solutions-oriented approach to troubleshooting and customer service, ensuring efficient problem resolution., • Perform additional duties as assigned. EDUCATION EXPERIENCE/ REQUIREMENTS • High School Diploma or equivalent, • Must have completed a military aviation specialty course or accredited aviation vocational school with at least 6 years of related aviation maintenance experience, • An FAA Airframe and Powerplant (A&P) license is desired, • Must provide own hand tools, specialized tooling and test equipment shall be provided, • Must be a US Citizen, • Must have the ability to obtain and maintain a secret or higher security clearance, • Experience on rotary platforms highly preferred, • Must possess effective communication skills with experience in inter-discipline team environment desired, • We maintain a drug-free workplace and perform post offer, pre-employment substance abuse testing. PHYSICAL REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. • Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day., • Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices, • Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders., • May be required to lift up to 50 pounds and carry for short distances., • May be required to read dials/gauges, identify small objects and hand tools., • Must be able to see imperfections, micrometer readings and other small scales., • Must be able to communicate by voice and detect sound by ear., • Must be able to distinguish color and judge three-dimensional depth., • May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Environmental Factors: • Work in an inside/outside environment to include working around machinery, objects, vehicles, ladders, and scaffolds., • Excessive noise and vibration that can be intermittent or constant., • Environmental conditions can included but not limited to dust, silica, asbestos, fumes, smoke, gas, solvents such as degreasing agents, grease, oils, and electrical energy, • Working on slippery or uneven surfaces, • Working closely with others or working alone, • Possible protracted or irregular hours of work as needed or required. EQUAL OPPORTUNITY EMPLOYER/ VEVRAA/ ADA • TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Employment Opportunity Employer and a VEVRAA governed Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities. TNC provides all employees and job applicants equal employment opportunities in hiring and promotion without regard to age, sex, sexual orientation, marital status, race, religion, color, veteran status, genetic information, physical or mental disability, national origin or any other reason prohibited by law. Job Posted by ApplicantPro

Job Description Traveling Leasing Professional | Multi-State Portfolio $65,000 Annual Salary + Leasing Commissions + Mileage Reimbursement + All Travel Expenses Covered Are you a high-performing leasing professional who thrives on challenges, enjoys travel, and knows how to drive results? Brookside Properties is seeking an experienced Traveling Leasing Professional to support apartment communities across Tennessee, Alabama, Arkansas, and occasionally Mississippi. This is not your typical leasing role. We're looking for a sales-driven professional who can step into communities needing additional leasing support, quickly build rapport with prospects, increase occupancy, and help solve leasing challenges. If you enjoy variety, independence, and making an immediate impact wherever you go, this could be the perfect opportunity. What You'll Do • Travel extensively throughout our portfolio, providing on-site leasing support where it's needed most, • Assist communities experiencing occupancy challenges, staffing transitions, lease-up activity, or increased leasing demand, • Conduct apartment tours and convert prospects into residents, • Build and maintain a strong prospect pipeline through phone, email, text, and in-person interactions, • Execute marketing and outreach initiatives to increase traffic and leasing activity, • Deliver exceptional customer service throughout the prospect and resident experience, • Ensure leasing offices, model apartments, and community amenities are tour-ready, • Support property teams with leasing best practices and sales-focused strategies, • Maintain accurate prospect and resident information within property management systems What We're Looking For • Proven success in apartment leasing and multifamily housing experience, • Strong closing skills and ability to build relationships quickly, • Self-motivated, adaptable, and comfortable working independently, • Excellent communication and organizational skills, • Ability to learn new communities, markets, and teams quickly, • Valid driver's license and ability to travel extensively, • Comfortable with frequent overnight travel and changing assignments Preferred Qualifications • Experience with Entrata or other property management software is a plus, • Previous lease-up, floating, or multi-site experience is highly desirable Why Join Brookside? • $65,000 annual salary, • Leasing commission opportunities, • Mileage reimbursement, • Hotel and travel expenses covered, • Full benefits package including medical, dental, vision, and 401(k), • Paid time off and holidays, • Opportunity to work across multiple markets and make a measurable impact, • Join a growing company that values initiative, performance, and professional development Location Preference Candidates should reside in or near Nashville, Huntsville, Chattanooga, or Memphis to allow for efficient travel throughout the assigned portfolio. If you're the type of leasing professional who enjoys solving problems, driving occupancy, and helping communities succeed, we'd love to hear from you.

Job Description Travel Radiologic Technologist – Radiology (OR) | Days Location: Huntsville, Alabama Contract Type: Travel Assignment Shift: Tuesday–Thursday, 7:00 AM – 7:30 PM Start Date: ASAP Duration: 13 weeks (with potential for extension) Position Overview We are seeking an experienced Radiologic Technologist to join a surgical imaging team for a travel assignment in Huntsville, AL. This opportunity is ideal for professionals with strong OR experience, particularly in spine and orthopedic procedures, looking to deliver high-quality diagnostic care in a fast-paced environment. Minimum Requirements ARRT (R) certification required BLS (Basic Life Support) certification required Education: Graduate of an accredited Radiologic Technology program OR Military training in Radiologic Technology with full scope of practice Experience: Proficiency with spine and orthopedic procedures Hands-on experience operating OEC C-arms in the OR setting Must reside at least 50 miles from the facility to qualify as a traveler Key Responsibilities Perform radiographic and fluoroscopic procedures in accordance with department protocols and physician orders Provide C-arm imaging support during surgical procedures Ensure proper operation of radiologic equipment and maintain accurate patient records Collaborate with radiologists and OR teams to ensure safe and efficient imaging workflow Maintain compliance with all regulatory and safety standards Why Work in Huntsville, AL? Huntsville, often called “Rocket City,” blends southern charm with innovation. Home to NASA’s Marshall Space Flight Center, a vibrant downtown, and scenic outdoor escapes like Monte Sano State Park, Huntsville offers a unique mix of culture, history, and natural beauty. With a low cost of living and plenty to explore on your days off, it’s a top destination for traveling healthcare professionals. Apply today to take part in a high-impact OR imaging team while enjoying all that Northern Alabama has to offer.

Job Description Position: Regional Sales Executive Reports to: VP of Sales and Preconstruction Department: Sales Status: Regular Full-Time Position – Exempt/Salary Position Value Proposition As the Regional Sales Executive, you will be responsible for revenue generation and increasing the profitability of the organization through strategic sales initiatives and marketing plans. Carrying out the company’s overall mission and growth plans, this position will work with the VP of Sales and Preconstruction to create and oversee the execution of revenue streams for future profitable growth. Core Responsibilities • Enact strategy and sales initiatives to support company objectives., • Foster strong relationships with existing and potential customers including internal department heads and team members., • Works closely with the VP to execute company’s sales strategy for their region., • Develop and execute a Market Strategy that leverages the strengths of the organization., • Identify competitive advantages and new markets for future sustainable growth., • Self-driven individual who has the drive to achieve company performance goals and sales targets., • This position requires up to 50% travel within the set territory. Required qualifications (Knowledge, Skills, and Abilities) to perform essential functions of this position Core Competencies: • Customer Focus - Is dedicated to meeting the expectations and requirements of internal and external customers; gets first-hand customer information and uses it for improvements in products and services; acts with customers in mind; establishes and maintains effective relationships with customers and gains their trust and respect., • Business Acumen - Knows how businesses work; knowledgeable in current and possible future policies, practices, trends, technology, and information affecting his/her business and organization; knows the competition; is aware of how strategies and tactics work in the marketplace., • Time Management - Uses his/her time effectively and efficiently; values time; concentrates his/her efforts on the more important priorities; gets more done in less time than others; can attend to a broader range of activities., • Negotiating - Can negotiate skillfully in tough situations with both internal and external groups; can settle differences with minimum noise; can win concessions without damaging relationships; can be direct and forceful as well as diplomatic; gains trust quickly of other parties to the negotiations; has a good sense of timing., • Integrity and Trust - Is widely trusted; is seen as a direct, truthful individual; can present the unvarnished truth in an appropriate and helpful manner; keeps confidences; admits mistakes; doesn't misrepresent him/her self for personal gain., • Listening - Practices attentive and active listening; has the patience to hear people out; can accurately restate the opinions of others even when he/she disagrees., • Perseverance - Pursues everything with energy, drive, and a need to finish; seldom gives up before finishing, especially in the face of resistance or setbacks., • Presentation skills - Is effective in a variety of formal presentation settings: one-on-one, small and large groups, with peers, direct reports, and bosses; is effective both inside and outside the organization, on both cool data and hot and controversial topics; commands attention and can manage group process during the presentation; can change tactics midstream when something isn't working, • Decision Quality - Makes good decisions (without considering how much time it takes) based upon a mixture of analysis, wisdom, experience, and judgment; most of his/her solutions and suggestions turn out to be correct and accurate when judged over time; sought out by others for advice and solutions., • Drive for Results - Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom-line oriented; steadfastly pushes themselves and others for results. Work Experience Minimum of five (5) years of experience developing and managing new business within the construction industry; Additional years of experience may substitute bachelor’s degree Education/Training Bachelor’s Degree preferably in Business, Marketing or Engineering. Ongoing training in sales strategies and/or business development is also preferred Specialized Knowledge – Certificates & Licenses As outlined in the Core Competencies, an individual must have thorough knowledge and an advanced understanding of each competency outlined above in order to carry out the essential functions of this position. Specialized Knowledge is also required in the following areas: • Business development within the Industrial Construction Industry; Knowledge of building concepts and principles., • Public Speaking/Presentation Skills Software & Technology Position will require experience with and the frequent use of CRM Systems, MS Windows, MS Word, MS Excel, MS Outlook, and Blue Beam PDF Software. Use of Concur Software for expenses and other software will be required (training will be provided). Work Environment Position requires as many hours needed to fulfill the daily and weekly obligations required to carry out the functions. Working long days including evenings and weekends can be required for this position. Position requires frequent out of state air/road travel as needed and required. A clean driving record will be required due to required road travel. Current and valid driver’s license is required. This position is generally indoors but frequently traveling meeting with customers and business associates. Travel is regular and frequent. Reasonable accommodations will be made upon request for those who have disabilities that qualify under the American with Disabilities Act. At GrayWolf, we believe our employees are our greatest asset. Our team environment is based on respect, effective communications, and accountability. We believe employees should have great working conditions along with opportunities to grow and develop. We proudly promote a diverse and inclusive workplace where everyone has a chance to be successful. GrayWolf is an Equal Opportunity Employer with an Affirmative Action Plan. We value Diversity. #LI-AC1

Job DescriptionSenior Mechanical Project Manager (Traveling) Nationwide Projects | Full-Time Travel Required Confidential Opportunity – Partnered with a Leading Mechanical Contractor We are partnered with a reputable, national mechanical contractor seeking a Traveling Senior Project Manager to lead large-scale HVAC and mechanical construction projects across the U.S. About the Role As a Senior Project Manager, you will lead projects from preconstruction through closeout, ensuring safety, quality, budget, and schedule are consistently achieved. This is a high-impact role for someone who thrives in dynamic environments and enjoys working on diverse, complex projects Key Responsibilities • Lead and enforce jobsite safety and compliance culture, • Manage scope, schedule, and field resources, • Oversee procurement and subcontractor coordination, • Drive financial performance, budgeting, and cost control, • Review and maintain project documentation and reporting, • Support estimating and preconstruction efforts, • Build and maintain strong client and team relationships, • Contribute to business development and sales supportWhat We’re Looking For, • 8+ years of Mechanical Project Management experience, • Strong knowledge of HVAC and mechanical systems, • Ability to read and interpret construction documents and plans, • Understanding of design principles, tools, and construction methods, • Experience with:, • Project financials and cost control, • Operations and business processes, • Client relations and project delivery, • Knowledge of construction law and contract management, • Must be open to full-time travelWhy This Opportunity, • Work on diverse projects: hospitals, data centers, stadiums, manufacturing, and more, • Strong pipeline of work across multiple regions, • Backed by the stability and resources of a large contractor, • Team-oriented culture with long-term growth potential, • Opportunity to take on high-visibility, impactful projectsCompensation & Benefits, • Competitive compensation (DOE), • Travel support and project-based perks, • Comprehensive benefits package, • Long-term growth and advancement opportunities

Job DescriptionSenior Mechanical Project Manager (Traveling) Nationwide Projects | Full-Time Travel Required Confidential Opportunity – Partnered with a Leading Mechanical Contractor We are partnered with a reputable, national mechanical contractor seeking a Traveling Senior Project Manager to lead large-scale HVAC and mechanical construction projects across the U.S. About the Role As a Senior Project Manager, you will lead projects from preconstruction through closeout, ensuring safety, quality, budget, and schedule are consistently achieved. This is a high-impact role for someone who thrives in dynamic environments and enjoys working on diverse, complex projects Key Responsibilities • Lead and enforce jobsite safety and compliance culture, • Manage scope, schedule, and field resources, • Oversee procurement and subcontractor coordination, • Drive financial performance, budgeting, and cost control, • Review and maintain project documentation and reporting, • Support estimating and preconstruction efforts, • Build and maintain strong client and team relationships, • Contribute to business development and sales supportWhat We’re Looking For, • 8+ years of Mechanical Project Management experience, • Strong knowledge of HVAC and mechanical systems, • Ability to read and interpret construction documents and plans, • Understanding of design principles, tools, and construction methods, • Experience with:, • Project financials and cost control, • Operations and business processes, • Client relations and project delivery, • Knowledge of construction law and contract management, • Must be open to full-time travelWhy This Opportunity, • Work on diverse projects: hospitals, data centers, stadiums, manufacturing, and more, • Strong pipeline of work across multiple regions, • Backed by the stability and resources of a large contractor, • Team-oriented culture with long-term growth potential, • Opportunity to take on high-visibility, impactful projectsCompensation & Benefits, • Competitive compensation (DOE), • Travel support and project-based perks, • Comprehensive benefits package, • Long-term growth and advancement opportunities

Job Description This position is contingent upon the role being formally added to the contract. nou Systems, Inc. (nSI) is now officially a 100% ESOP company! We value teamwork and collaboration, and this transition allows us to take that commitment to a new level. nSI empowers our customers by supplying products, services, and expertise with powerful, data driven insights that transform defense systems and improve capabilities. We are pleased to announce the opening for a Senior Missile Defense Space-Based Interceptor (SBI) Analyst, who will join our Engineering Services Division in Huntsville, Alabama and become part of our rapidly growing technology company operating in missile defense, cybersecurity, test range modernization, biotechnology, and space control marketspaces. Qualified candidates will be part of an exceptional team supporting the Missile Defense Agency (MDA) mission to develop and deploy a layered Missile Defense System to defend the United States, its deployed forces, allies, and friends from missile attacks in all phases of flight. Responsibilities: The Senior Missile Defense Space-Based Interceptor (SBI) Analyst will be providing technical support to the Missile Defense Agency on the MDA Technical, Engineering, Advisory and Management Support (TEAMS)-Next Specialized Engineering Analyses (SEA) contract. The unique, highly qualified SEA Team is critical to ensuring the MDA can rapidly develop and deploy missile defense capabilities to defeat advanced missile threats by aggressively pursuing advanced concepts and technologies for leap-ahead capability in directed energy, hypersonic missile defense, radiation hardened electronics, space-based sensors, and Israeli defense systems. The SEA Team provides comprehensive Missile Defense System test analyses, future Missile Defense System architecture modeling and design, advanced technology analyses, and specialized engineering support to improve the development, testing, and fielding of technical capabilities that are also cybersecure and tamper-proof. This position will support the MDA Engineering Directorate within the Enterprise Analysis, Assessment, and Verification group. The Analysis division serves as the Agency’s center of excellence for Missile Defense System test event analysis, providing senior leadership with accurate, high‑quality, and timely assessments of system performance. The selected candidate will contribute to rigorous analytical products related to Space‑Based Interceptor (SBI) efforts, informing critical engineering decisions and supporting future testing that will guide the SBI’s continued development. Duties include: • Supporting all aspects of MDA testing (particularly flight testing) through proactive communication and close coordination with internal and external partners, • Contributing to the design, planning, and execution of missile defense flight tests, including development of test objectives and assessment requirements, • Participating in MDA Joint Analysis Team (JAT) activities, integrating multi‑disciplinary analysis to support informed decision‑making, • Applying knowledge of missile defense test resources, range operations, and procedures (e.g., frequency spectrum allocation, range safety), • Providing clear, actionable test requirements to contractors supporting flight test activities, • Establishing and communicating Go/No‑Go criteria for flight testing, • Developing analytical tools related to test objectives, flyouts, delta‑v calculations, predicted intercept points, and similar mission‑planning elements, • Traveling as required to support test planning, execution, and analysis activities Basic Qualifications: • This position is open only to US Citizens., • You must have 12+ years working on missile defense-related or other complex, large DoD programs/projects or industry equivalent., • You must have a Master of Science or Master of Arts degree., • Note: The Government will consider a BA/BS from an accredited institution of higher learning in a related field with 20+ years of experience in lieu of the MA/MS degree requirement, • Must possess excellent oral and written communication skills and critical thinking abilities., • Must be capable of working independently and/or leading teams to analyze and resolve problems., • Must be able to provide daily supervision and direction to support teams, • You must possess or have the ability to obtain an active Secret clearance. Preferred Qualifications: • Familiarity with one or more elements of the Missile Defense System., • Familiarity with Joint Analysis Teams and their roles within the Missile Defense Agency. nou (pronounced ‘new’) Systems: Since its founding in 2012, nou Systems has built a reputation for excellence in innovative engineering, prototype development, and technical and professional services in multiple markets, including missile defense, cybersecurity, test range modernization, and space control. Our diverse and highly skilled team delivers state-of-the-art products from concepts and prototypes to fully developed and integrated solutions. We offer significant advancement and personal career development opportunities within our dynamic high-tech company. Benefits of working at nSI nou Systems, Inc. offers a comprehensive, total rewards package that includes competitive compensation and diverse benefits that reflect our company culture of service, excellence, and a supportive work environment. Benefits may vary based on status, but most of our positions include the following: • Competitive Wages*, • Medical, Rx, Dental & Vision Insurance, • Medical plan with Health Savings Account eligibility, • Company-funded Life, Short-Term & Long-Term Disability Insurance, • Personal Time Off, Vacation, and Paid Holidays, • 401(k) Retirement Plan, • Employee Stock Ownership Plan (ESOP), • Flexible Spending Accounts, • Norton LifeLock, • Tuition Reimbursement, • Personal Development, Technical Learning Opportunities, & Lunch-n-Learns, • Corporate Sponsored Events & Community Outreach *Final compensation for this position is determined by a variety of factors, such as a candidate’s relevant work experience, skills, certifications, and geographic location. nSI is an Equal Opportunity Employer Employment opportunities at nSI are based upon a candidate’s qualifications and capabilities to perform the essential functions of a particular job and are free from discrimination based on race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, protected veteran status, genetic information, or any other characteristic protected by law. For our complete EEO/AA and Pay Transparency statement, please visit www.nou-systems.com/workingatnou. U.S. citizenship is required for most positions.

Job Description About Us Polished and Decorative Concrete (PDC) is a premier, fast-growing flooring company with over 15 years of industry excellence. Backed by national commercial and industrial contracts, we pride ourselves on delivering top-tier craftsmanship. As we expand our operations nationwide, we are seeking reliable, hardworking, and highly experienced Concrete Polishing Professionals to join and lead our crews on the road. ⚠️ IMPORTANT REQUIREMENT: This position requires a minimum of 5 years of hands-on concrete polishing experience. Resumes without relevant industry experience will not be considered. Key Responsibilities As a senior crew member, you will execute and oversee high-quality flooring projects from prep to completion. Your daily duties will include: • Equipment Operation: Professionally operate planetary concrete grinders, polishers, high-speed burnishers, and HEPA dust-extraction vacuums., • Surface Preparation: Perform coating removal, crack/joint repair, patching, and precision edge work., • Finishing & Artistry: Correctly apply densifiers, protective sealers, stains, and custom decorative finishes., • Project & Site Management: Maintain a clean, OSHA-compliant, "safety-first" job site. Ensure projects are documented accurately and completed on schedule., • Logistics: Safely load, unload, and maintain company equipment, materials, and trailers. Required Qualifications • Experience: Minimum of 5 years of verifiable concrete polishing experience (Required)., • Travel: 100% availability for nationwide travel (Required)., • Physical Stamina: Ability to lift 50+ lbs regularly and comfortably work 8–12 hour shifts., • Environment: Comfortable working in active, dusty, and noisy industrial/commercial environments., • Mindset: Strong work ethic, excellent leadership and communication skills, and a commitment to safety. Travel & Schedule Details This is a 100% traveling position. We ensure our crews are well taken care of while on the road: • Rotation: 8–10 weeks on the road, followed by 1 full week of home time., • Transit: Company-provided crew transportation, tools, and trailers. PDC will also assist with your travel expenses to your very first job site upon hire., • Lodging: 100% company-paid hotel or Airbnb accommodations. What We Offer (Compensation & Benefits) • Competitive Pay: Top-tier rates based on your experience level., • Paid Travel Time: You get paid for the hours spent getting to the job., • Financial Security: 401(k) retirement plan., • Support System: 24/7 direct access to dedicated Project Managers and office support., • Growth: Continuous on-the-job training and clear pathways for career advancement.

Job DescriptionSalary: Position Summary As a full-time Project Engineer, you will be a valued and trusted member of the NCDMM team. You will effectively and efficiently plan, lead, and execute multiple projects for our DoD customers within the defined project scopes and budgetary constraints. Develop statements of work, cost proposals and project timelines for new business opportunities. Project Engineers must communicate well with customers, management, other engineers, and technicians. The ideal candidate is a collaborative and creative team member with a passion for project management and execution while collaborating with team members and customers. The candidate must be detail oriented. The NCDMM team culture is innovative, creative, and fast paced. Members of the team must be adaptive to thrive in an ambiguous environment. This role is part of a collaborative team, but a candidate with a "self-starter" personality with high-energy will grow and thrive in this role. Essential Functions • Must be able to coordinate and execute multiple technical projects, which includes:, • Time management (both project and non-project), • Project budget management up to $1.0 M, • Developing and managing project costs (pre and post award), • Delegating tasks for timely execution of assignments, • Planning and executing tasks within budget and schedule, • Expanding customer and partner networks within our advanced manufacturing ecosystem, • Developing and maturing customer relationships, and meet/exceed customer expectations, • Identifying business opportunities - new and existing customer base., • Traveling (<30% travel is expected), • Working with managers and contract authorities to ensure quality project reporting (budget and progress milestones) subject to internal and external audits Required Education and Experience • Has a B.S. degree in engineering or a related engineering technical area with 3-5 years relevant experience., • In lieu of a B.S. degree, an associate degree in engineering or a related engineering technical area with 15 years relevant experience., • Must demonstrate consistent career achievement including supervising project budgets (material/labor) and proven ability to generate quality reports., • Has a minimum of 3-5 years of experience in leading and managing projects effective delegation of tasks is a plus., • Has experience working in a manufacturing environment with a generalist perspective and knowledge of manufacturing operations and processes., • Has experience working in DoD project and manufacturing environments., • Has strong oral and written communication skills, with emphasis on technical report writing., • Requires little oversight, is proactive and moves forward with confidence., • Works well in a collaborative team environment., • Can communicate on a technical and non-technical level, tailored to the intended audience., • Is interested in professional and personal development., • Is well-versed in Microsoft Office suite of tools, including Microsoft Project. About NCDMM NCDMM delivers innovative and collaborative manufacturing solutions that enhance our nations workforce and economic competitiveness. NCDMM has extensive knowledge and depth in commercial and defense manufacturing areas to continually innovate, improve, and advance manufacturing technologies and methodologies. Our experienced team specializes in identifying the needs, players, technologies, and processes to attain optimal solutions for our customers. We connect the dots. Thats the NCDMM methodology. With seven locations nationwide, NCDMM managesAmerica Makes,The Youngstown Innovation Hub, andEl Paso Makesand is a subsidiary of the Manufacturing Technology Deployment Group, Inc. (MTDG). Learn more atncdmm.org. NCDMM is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. NCDMM, as a government contractor, is required to verify all employees through the E-Verify system to confirm eligibility to work in the United States.

Job Description Are you a proven leader ready to take the next step in your career? Do you want to join a fast-growing company driven by integrity and quality workmanship where your leadership will be appreciated? Leap Service Partners is seeking a quality individual eager to lead, train, and improve the skills of our field service team. You are the best and you want to join a team that appreciates you, where you can create your own opportunities. At Leap Service Partners our Field Trainers are treated as valuable, serious Branch Support professionals. We are looking for someone interested in a long-term leadership opportunity to advance with a growing company. If you are interested, please APPLY now. $3,000 Sign - on bonus plus commission based on skill level and experience. Our Field Trainers are among the highest paid professionals in the industry, with unlimited earning potential! Performance based bonus structure based on branch KPI. Summary: The Field Trainer is responsible for traveling to branch locations to coach, train, and mentor HVAC, Electrical, Plumbing, and Sales teams to improve performance, customer experience, and revenue generation. This role works closely with branch leadership and field employees to reinforce company standards, improve close rates, increase memberships and service agreements, and create consistency across operations.The ideal candidate is passionate about developing people, driving accountability, and helping teams maximize sales and service opportunities while maintaining exceptional customer satisfaction. Our Rewards: ● Competitive salary + performance bonus opportunities ● Company vehicle or travel reimbursement ● Medical, Dental, and Vision insurance ● 401(k) with company match ● Paid time off and holidays ● Ongoing professional development opportunities Essential Job Duties: ● Travel regularly to branch locations to train, coach, and mentor technicians, comfort advisors, plumbers, electricians, and sales teams. ● Observe field performance and identify opportunities to improve sales, communication, customer service, and operational efficiency. ● Conduct ride-alongs with technicians and sales staff to provide real-time coaching and development. ● Train teams on sales processes, customer interactions, financing options, memberships, and upselling opportunities. ● Develop and implement training programs focused on increasing conversion rates, average ticket value, and overall branch performance. ● Reinforce company standards, service procedures, and best practices across all trades. ● Partner with branch managers and leadership teams to identify performance gaps and create action plans for improvement. ● Monitor and manage KPIs including close rates, average ticket value, lead generation, memberships, and customer satisfaction scores. ● Assist with onboarding and continued education for new hires and existing employees. ● Support branches during peak seasons, promotions, and growth initiatives. ● Maintain positive relationships with branch leadership and field teams while promoting a culture of accountability and continuous improvement. Other Duties: ● Performs other duties as requested Knowledge, Skills, & Abilities: ● Strong leadership, coaching, and mentoring abilities. ● Extensive understanding of residential home service sales processes. ● Ability to motivate teams and improve sales and operational performance. ● Excellent communication, presentation, and interpersonal skills. ● Strong organizational and problem-solving abilities. ● Ability to analyze branch performance metrics and implement improvement strategies. ● Experience conducting ride-along coaching and field training. ● Proficient with CRM systems, sales reporting, and performance tracking tools. ● Ability to manage multiple branch relationships and priorities effectively. ● Regular and reliable attendance. Minimum Qualifications: ● High school diploma or equivalent. ● Possess a valid driver’s license and maintain a clean driving record. ● Eligible to work in the U.S. without sponsorship. ● Minimum of 3 years of experience in HVAC, Electrical, Plumbing, In-Home Sales, or Service Management. ● Proven ability to coach and develop field or sales teams. ● Ability to travel frequently to branch locations. Preferred Qualifications (not required): ● Experience training multi-trade home service teams. ● Knowledge of financing programs, memberships, and service agreements. ● Experience presenting to both small groups and large teams. ● Prior experience improving sales KPIs and branch performance metrics. ● Service Titan Experience. Physical Demands: ● Ability to operate tablet, mobile phone, laptop, and other field equipment as needed. ● Ability to read, write, speak, hear, see, think, communicate, concentrate, learn, and work. ● Ability to sit/stand for extended periods during work hours. ● Ability to travel frequently between branch locations and customer sites. ● Ability to work in office, classroom, and field environments. ● Ability to perform ride-alongs and hands-on coaching in residential service environments. ● Ability to perform the essential functions of the position with or without reasonable accommodation. ● Ability to travel during the week to branches for support up to 100% of the time Leap Service Partners is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Job DescriptionBenefits: • Flexible schedule Are you looking for a fast-paced, exciting, and flexible income opportunity? You're in luck! Metroplex360 Reality Capture Servicesthe leading 3D Virtual Tour team in Texasis actively seeking skilled and detail-oriented 3D Matterport Capture Technicians/Photographers/Drone Pilots to join our dynamic team of field professionals. This independent contractor role allows you to create your own schedule, work independently, and collaborate with a supportive and experienced real estate media team. It's a fantastic opportunity for creative, technically-savvy individuals who are passionate about visual storytelling and producing high-quality real estate content. About Us: Metroplex360 Reality Capture Services is Texass leading 3D virtual tour provider, proudly serving a wide range of clients since 2006. We are currently proud to serve our clients nationwide. Our team is built on values like teamwork, open communication, continuous improvement, and a balance of professionalism and personality. We specialize in delivering high-quality visual content with fast turnaround times and dependable supportall at sustainable, competitive rates. Our trusted client base spans across industries including Multi-Family & Senior Living, New Home Builders & Developers, Retail, Hospitality & Restaurants, Commercial & Residential Real Estate, Architecture, Engineering & Construction (AEC), and Insurance, Recovery & Surveying. We are currently seeking skilled photographers to partner with us in capturing exceptional content for both residential and commercial projects. Why Join Metroplex360s network of capture technicians? As a Capture Technician with Metroplex360 (1099 contractor role), you can focus on capturing exceptional photos and immersive 3D content, while we handle the rest. From marketing, sales, and scheduling to client communication and editing, we take care of the business side so you can spend more time doing what youre passionate about. This is an excellent opportunity for a creative, technically-savvy professional whos enthusiastic about visual storytelling and real estate media. What Youll Need to Succeed: To thrive in this role, youll need to meet all equipment requirements (listed below) and bring a strong commitment to customer service and professionalism. You must have a reliable internet connection, a current and legal drivers license, and dependable transportation to travel to and from job sites across your region. As a Metroplex360 Capture Technician, youll conduct on-site 3D scans, HDR photography/video, and drone photography/video using Matterport,DSLR, and drone equipment, ensuring a high level of accuracy, attention to detail, and spatial awareness in all visual assets. Youll represent Metroplex360 with professionalism and courtesy, communicate clearly with our scheduling and post-production teams, and manage your schedule independently while meeting deadlines and maintaining our quality standards. If you're excited to join one of the most experienced and respected networks of real estate media professionalswe want to hear from you! Required Equipment: To ensure high-quality results and compatibility with our production standards, all photographers must have the following gear: • Full-Frame DSLR or Mirrorless Camera capable of bracketing 5+ exposures in AEB (Auto Exposure Bracketing) mode, • Wide-Angle Zoom Lens (1416mm preferred) Prime lenses are not compatible, • Sturdy Tripod to maintain stability and precision, • Ball Head tripod mount for flexible and secure camera positioning, • Matterport Pro2 or Pro3 Camera for 3D virtual tour captures, • Drone - Part 107 FAA licence Compensation: We offer competitive, project-based compensation based on the type and scope of each assignment. For Matterport captures, pay is calculated per square foot, while photography and other services are compensated per job. While actual payouts vary by project, our goal is for technicians to consistently earn the equivalent of $70$100 per hour based on efficiency and deliverables. Most individual jobs range $70+, with opportunities to earn more depending on complexity, location, and turnaround time. Full compensation details are shared during onboarding. Requirements: Ideal candidates will have a background in photography, surveying, or a related field, and should be comfortable working on their feet for extended periods. Reliable transportation is a must, as you'll be traveling to various job sites. To qualify, you must demonstrate competency in real estate photography by completing a remote certification course and submitting a test photoshoot. Upon onboarding, you'll also be required to submit a W-9 form with a valid EIN and provide a current Certificate of Insurance. Join hundreds of satisfied photographers nationwide who are earning more while doing what they love with Metroplex360. If you're passionate about capturing spaces and creating high-quality visual content, wed love to hear from you!

Job DescriptionBenefits: • Bonus based on performance, • Company parties, • Flexible schedule, • Free food & snacks ARE YOU HARD WORKING? DO YOU VALUE SERVICE TO OTHERS AND MAKING THEM HAPPY? Do you like making a difference in people's lives? Are you ambitious, energetic, and service-oriented? Do you enjoy providing top-quality service? We are a new, innovative, and exciting company with our goal to change the way people feel about the moving industry. We are searching far and wide for motivated professionals who are excited to make a difference in our customer's lives as part of our new launch at Pink Zebra Moving. The ideal candidate will be an ambitious, energetic, and service-oriented individual who enjoys providing top-quality service to our clients. Core Values - This opportunity is for you if you are all about: • Looking out for your teammates - Being a team player is key to your success, • Service to Others - Taking pride in your work, • Consistency - Each customer deserves the same level of service, • Strive to Always Get Better - We pride ourselves in helping people achieve personal & professional growth. More about the Position: Professional Movers will be traveling to our customer's homes and provide top level moving services. You will receive paid training, all your supplies and equipment, and various awards and incentives. If you believe that hard work and top performance deserve recognition and you are looking for a culture where it's possible to have fun, work hard, and feel appreciated then this is the job for you. All Team Members of our company must meet the following requirements: • You must be 18 years of age or older, • Must be able to lift more than 50 lbs, • You must be punctual and dependable, • You must successfully undergo a nationwide criminal background check and any drug screenings if necessary PLEASE FILL OUT THE PRE-SCREEN QUESTIONS AND SUBMIT YOUR APPLICATION.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility OverviewGTI Fabrication is staffing a hyperscale modular data center build at our Buffalo, NY facility. We are hiring traveling contract electricians at apprentice and journeyman levels to wire and integrate modular power systems that ship to data center clients across North America. All work is performed indoors in a climate-controlled shop — no jobsite, no weather, no travel between sites. Compensation Apprentice Electrician: $26.70–$44.50/hr (level assigned based on verified experience and skills assessment) Journeyman Electrician: $50.00–$55.00/hr $130/day tax-free per diem for every shift worked 8+ hours Hit 60 hours in a week and the 7th day of per diem is paid with no additional time on the clock — $910/week in tax-free per diem Over $23,660 in tax-free per diem across the 6-month contract Weekly pay, direct deposit, overtime paid at time-and-a-half Per Diem Eligibility Under IRS travel rules, contractors whose primary residence is 60+ miles from the worksite qualify for tax-free per diem. Electricians from anywhere in the United States are eligible to apply. Responsibilties Install, terminate, and troubleshoot wiring, conduit, panels, cable trays, and power distribution within modular data center units Install motors, junction boxes, and 120V / 240V / 480V systems Read and execute electrical schematics, ladder diagrams, and wiring prints Test circuits using multimeters and diagnostic equipment Maintain NEC code compliance and GTI quality standards Document work and follow shop safety procedures Qualifications Apprentice: active apprenticeship or completed coursework, basic conduit and wiring fundamentals, ability to work under journeyman direction Journeyman: state journeyman license where required, OR documented completion of 8,000+ hours of supervised industrial electrical work, OR equivalent industry certification (NCCER, IEC, ABC) — verified through a skills assessment Ability to read electrical diagrams and prints Must supply basic tools, PPE, and multimeter Reliable transportation to Buffalo and willingness to relocate for the duration of the contract Primary residence 60+ miles from Buffalo, NY (ZIP 14219) for per diem eligibility Preferred Qualifications Hyperscale data center experience Modular construction or industrial fabrication background Strong troubleshooting experience on 120V / 240V / 480V systems Schedule 1st Shift: 7:00 AM – 4:00 PM 2nd Shift: 3:30 PM – Midnight Expected HoursExpected 60 hours/week across 6 days. 6-month contract with strong potential for extension. #ZR GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Are you ready to dive into the world of cutting-edge electronics and make a real impact? Join ActionLink as a Part-Time Retail Display Installer for Huntsville, AL and the surrounding area. Enhance the Retail Experience, One Display at a Time! • Store Visits: Complete projects at major retail stores within an assigned territory, • Purpose: Ensure proper placement, assembly, maintenance, and troubleshooting of promotional product displays, • Clients: Represent global clients such as Microsoft, Samsung, T-Mobile, Dyson, Bose, and Intel, • Scheduling: up to 20 hours per week, availability required Monday-Friday; 8:00am to 5:00pm. No weekends/evenings., • Additional Opportunities: Potential for more hours if covering larger regions or traveling., • Reporting: Submit same-day digital surveys with feedback and pictures for each store visit Unlock Amazing Perks! • Compensation: General merchandising projects are paid at $18.00 per hour, • Additional Technical Projects: Available at higher rates, based on need, • W2 Employment: Includes bi-weekly pay schedule and direct deposit, • Retirement Savings: Optional 401(k) retirement savings plan with company match, • Travel Reimbursement: Store-to-store drive time and mileage assistance, • Training: Paid training time is provided to prepare you for program success, • Time Off: Accrue PTO hours every week you work!, • TapCheck: Actionlink has partnered with TapCheck to provide you access to earned wages before payday. Tapcheck also provides a suite of financial services to help you manage your money. Think you've got what it takes? Let's connect! • Experience: Previous merchandising, 3PL, or relevant retail experience is highly desirable, • Versatility: Handle all levels of merchandising work within assigned territory, • Attention to Detail: Follow complex written instructions and display diagrams, • Independence and Teamwork: Comfortable working independently and collaborating with a small team when needed, • Tech-ready: Internet access, basic hand-held tools, and a Wi-Fi/GPS enabled smart device with latest OS update. Laptop/desktop access is a plus, • Travel Ability: Must have a valid driver's license and access to a personal vehicle and will be required to use their vehicle to perform the responsibilities of their role, • Physical Ability: Must be able to stand, bend, stoop, climb ladders, and lift products weighing up to 50 lbs. without assistance We are an Equal Employment Opportunity Employer

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris South is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in the southeast U.S. We serve manufacturers in Alabama, Arkansas, Georgia, Mississippi, North Carolina, South Carolina, Tennessee, Virginia and the Florida panhandle. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. We help you make better parts, less expensively. Job Responsibilities: The CNC Field Service Technician will have an extensive understanding of electrical, pneumatic, and hydraulic schematics to effectively detect and resolve issues with electrical and mechanical components. Duties include, but are not limited to: Traveling to customer sites to install, troubleshoot, repair and maintain all CNC machine tool equipment and controls for customer organizations Utilizing machine tool manuals, technical documents, internal and vendor resources to research machine issues Ensuring proper documentation is completed and submitted to office and customer in regards to status of machine issues, repairs, and installation Promoting and performing preventative maintenance on customer machine tool equipment and conducting after-sales technical support and training Possessing and maintaining an in-depth knowledge of machine tool industry and product lines represented by the company Other Functions: • Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. Job Competencies/Qualifications: MUST have 5+ years of experience with mechanical/electrical repair of CNC machine tools Experience with Microsoft Office Suite and other business programs as necessary Ability to read and interpret drawings and schematics Excellent technical, communication, and presentation skills Must be able to meet the physical requirements of the job. This position requires flexible hours, including overtime and occasionally working weekends. Frequent travel, including driving throughout a regional territory is necessary. What’s in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance 3+ Weeks’ Vacation to Start 10 Company Paid Holidays 401(k) retirement plan with company contribution Tuition reimbursement Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must be highly mobile, able to access all areas of the premises. Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. Ability to sit for prolonged period of times. Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. Ability to frequently use hands and arms. Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. You should be proficient in: • Heavy Equipment Repair, • Electrical Schematics, • Mechanical Troubleshooting Skills, • 120/208/240/480 Voltage Systems, • CNC Machine Repair, • Electrical Installation, • Electrical Troubleshooting, • Electrical Repair, • HVAC Service & Installation, • HVAC Maintenance, • HVAC Troubleshooting, • HVAC Repair, • High Voltage Systems, • Maintenance and Repair Skills, • Heavy Material Handling, • Industrial Electrical Systems, • Diesel & Heavy Equipment Systems, • Equipment Diagnostics & Troubleshooting, • Mechanical Systems & Component Repair, • Lockout/Tagout (LOTO), • Electrical Panel Installation, • Electrical Schematic Reading, • Low Voltage Cabling Installation, • Equipment Installation & Wiring, • Equipment Repair & Maintenance, • Equipment Installation, • Troubleshooting CNC Machines Machines & technologies you'll use: • CNC Mill (3-4 axis VMC) (Fanuc, Bridgeport, Mazak, ProtoTRAK, Haas, Okuma, Doosan, Kitamura, Makino, Brother, Hurco, Dmg Mori Seiki, Hwachon), • Refrigeration/Cooling Systems (Frick, Evapco), • EDM Machine (Sinker) (Fanuc, Mitsubishi, Makino, Sodick, Agie Charmilles, Accutex), • Voltage Detector (Fluke, Klein Tools, Amprobe, Extech, Southwire), • EDM Machine (Wire) (Fanuc, Mitsubishi, Makino, Sodick, Agie Charmilles, Accutex), • Injection Molding Machine (Toyo, Milacron, Toshiba, Niigata, Arburg, Van Dorn, Engel, Husky, Nissei, Sodick, Sumitomo, Haitian, Bole), • Peterbilt Truck (Peterbilt, Kenworth, Freightliner, Mack), • Industrial Controls (Allen Bradley, Mitsubishi, ABB, Omron, Siemens, Schneider Electric), • Power Tools (DeWalt, Makita, Milwaukee, Bosch, Ryobi, Black+Decker, Hilti), • Tractor-Trailer (Peterbilt, Kenworth, Freightliner, International, Volvo Trucks, Western Star), • CNC Lathe (2-4 axis) (Mazak, Haas, Okuma, Doosan, Takisawa, Dmg Mori Seiki, Samsung, Murata, Fuji, Nakamura, Hyundai - Wia, Hwachon), • CNC Waterjet (Mitsubishi, Flow, Omax, Kmt, Wardjet, Jet-Edge, Cms), • CNC Router, • CNC Swiss Lathe (Star, Citizen, Tsugami, Index, Eurotech, Tornos, Ganesh, Hanwha, Yama-Seiki, Nomura), • Variable Frequency Drives (VFD), • CNC Wire Bending Machine, • CNC Plasma Cutter (Torchmate, Alltra, Messer, Arclight, Plasmacam, Shopsabre, Vicon, Burlington), • Die Cast Machine (Cold Chamber), • EDM Drilling Machine, • CNC Mill (5+ axis VMC) (Fanuc, Mitsubishi, Mazak, Haas, Okuma, Kitamura, Matsuura, Mikron, Dmg Mori Seiki, Hwachon), • CNC Lathe (5+ axis) (Mazak, Okuma, Doosan, Index, Eurotech, Miyano, Dmg Mori Seiki, Samsung, Nakamura, Hwachon), • Universal Machining Center (5 axis UMC) (Okuma, Matsuura, Dmg Mori Seiki), • Universal Machining Center (3-4 axis) (Okuma, Toshiba, Dmg Mori Seiki, Maho), • Die Cast Machine (Hot Chamber), • Vertical Lathe (Okuma, Toshiba, Toyoda, Hwacheon), • HMI (Sigmatek), • Conveyor Systems (Swisslog, Dematic, Körber, Hytrol, Pentanova, Alba, Wulftec, Riantics), • Servo Motors, • Cylindrical Grinder Machine, • ID Grinder Machine

Job Description TFG is seeking a Field Service Technician to join our team in the Huntsville, AL area. As a Field Service Technician, you will be responsible for diagnosing, troubleshooting, and repairing foodservice equipment at customer sites. You’ll ensure equipment operates at optimal efficiency, address customer concerns through clear communication, and maintain high service standards. Technicians will manage their assigned territories, perform timely repairs, and proactively address potential equipment issues. Key Responsibilities Service Technicians are responsible for installs/repairs, upkeep, and troubleshooting of restaurant kitchen equipment sold and serviced by TFG. • Completes system installations by fabricating, mounting, and connecting various components such as: compressors, motors, control panels, gauges, and other related components to ensure power connections are secure and equipment is operationally sound., • Responsible for assigned customers and territories, as well as administrative duties pertaining to customer calls, expense reports, time sheets, and tracking of necessary preventative maintenance and requests made by customers., • Identifies malfunctions by testing, repairing, or replacing equipment/parts., • Presents and maintains a professional image., • Properly documents repairs and actions by completing equipment records., • Builds and fosters strong relationships with customers each visit., • Continues to learn on the job through participation in educational opportunities and training., • Maintains safe and healthy work environment by following company standards and procedures and complying with legal regulations. Skills, Abilities, Qualifications • Motivated to learn, retain, and apply equipment knowledge in the field and warehouse through hands-on and video training., • High levels of time-management and effective communication., • Ability to work independently without direct supervision., • Self-Motivated to perform tasks at a high level., • Organizational skills, and ability to properly document repairs and requests., • Capability to diagnose, repair, and solve equipment issues., • Is accountable, accurate, and shares a positive attitude., • Power tool experience and basic safety knowledge. Physical Requirements This position requires the ability to perform essential physical job functions with or without reasonable accommodation, including: • Lift and carry equipment or materials weighing up to 60 pounds, • Push or maneuver equipment weighing up to 900 pounds using wheels or dollies, • Move equipment weighing up to 500 pounds from a dolly to a countertop or work surface, • Climb ladders while carrying tools and equipment, • Kneel, crouch, bend, or work from the floor for extended periods of time, • Drive for extended periods of time as required for customer service calls and travel between job sites, • Safely operate hand and power tools, • Work in a variety of environments, including kitchens, warehouses, and outdoor conditions, with exposure to heat, cold, noise, and mechanical equipment Education & Experience Required: • Drivers License, • Must be over 21 years of age to operate company vehicles Preferred: • High School or Equivalent, • EPA Certification: Training/Certification Provided on Job, • Electrical and Refrigeration Technician Experience, • HVAC Technician Experience, • General Interest in the Foodservice Industry Work Environment • Field Service Technicians will work in Huntsville, AL and surrounding areas to complete repairs at customer locations., • Technicians may be required to provide on-call service, after-hours support, or work outside of traditional office hours., • Technicians must be comfortable traveling for assignments, as required, and must provide a valid driver's license upon hiring. About TFG: Total Foodservice Group (TFG) is a dedicated team of experts from various industry backgrounds, focused on providing top-notch customer service for companies in the foodservice industry. We offer high-quality foodservice equipment, readily available parts, and a global service network to support our clients’ success. Guided by our core values—People First. Forward Thinking. Whatever It Takes.—we are dedicated to excellence in service, sales, and fostering a company culture that puts people at the heart of everything we do. Join TFG and be part of a dynamic team that values hard work, innovation, and customer satisfaction. TFG is an Equal Opportunity Employer This position includes a one-week on-call rotation approximately once per month. 45-55 hours per week

Job Description Who We Are Evergreen Fire and Security (EFS) is a recognized leader in the life safety and security solutions industry. We are entrusted by the Federal Government and commercial customers to protect lives, critical infrastructure, and information by providing and maintaining technically advanced and innovative fire alarm, access control, intrusion detection, CCTV, mass notification, and other critical protection systems. The Key to Our Success Our success is largely due to the experience, skills, and expertise of the best and brightest employees in the industry. Due to growth, we are looking for additional qualified experts to join the Evergreen team. Think you have what it takes? Great! We welcome you to submit your qualifications for this great Evergreen Fire and Security career opportunity. The Opportunity This opportunity as a Traveling Electronic Security Systems Technician is perfect for an experienced low-voltage technician who enjoys traveling! The Responsibilities • Installs, repairs, tests, and maintains security projects, • Serves as the face of Evergreen to our customers onsite by providing top-notch service and product training, • Ensures safety through compliance with relevant State and Federal regulations, • Handles service orders and project administration, • Performs follow-up to ensure the client is ready for inspection The Necessities • Ability to travel extensively, • Valid CPR/First Aid card, • Valid electrician certificate or trainee card, • High school diploma or equivalent, • Electrical wiring experience, • Basic computer skills (Microsoft Office), • Good communication skills to interface with customers, • Ability to call and schedule appointments, follow instructions, and understand code requirements, • Attention to detail, • Ability to work autonomously, • Ability to work well with others and come to work with a positive attitude, • Valid driver’s license and proof of minimum liability insurance, • Ability to pass pre-employment and continuing random background, drug, and MVR screenings Great to Have • Relevant factory certifications and knowledge are always a plus. Great examples include:, • Lenel, • DAQ Access Control/IDS, • Milestone CCTV, • Pelco CCTV, • Monitor Dynamics Access Control/IDS, • AMAG, • Various DDC and Building Utility Control Systems, • Prior experience working on government contracts or military bases, • Ability to obtain a U.S. government clearance The Benefits Here at Evergreen, we pay competitive wages and benefits, but we also go the extra mile for our Technicians, and even more so for those who travel frequently. Sound good? Check these out: Awesome Travel Perks! • Additional weeks of paid leave for extended travel—up to 320 additional hours of time off!, • Paid flights for weekends at home for regional travel, • Weekly per diem for meals, incidentals, and lodging paid to you, • Paid TSA Pre-Check, • Work-related travel miles and hotel points are yours to keep Employee Benefits • Competitive pay, • Paid Time Off (PTO), • Paid holidays, • Medical, dental, and vision insurance plans, • 401(k) plan, • Up to 4% match available, • 100% vested from day one, • Healthcare flexible spending accounts, • Dependent care flexible spending accounts, • Employee Assistance Program (EAP), • Company-sponsored group term life insurance, • Corporate perks program, • Opportunities to participate in voluntary benefits such as pet insurance, voluntary life insurance, disability insurance, long-term care, hospital indemnity insurance, critical illness insurance, legal services, identity theft protection, and accident insurance Pay range is $30 - $45 per hour for well-qualified candidates. We also offer opportunities for training and advancement in a fast-paced, inclusive, and rewarding working environment. Check us out on Facebook, LinkedIn, or at www.evergreenfire.com. Evergreen Fire & Security is a US government contractor with sensitive access requirements. As our employee, you must also be able to satisfy federal government requirements for access to government information. Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. citizenship due to the level of access to sensitive information and/or restricted facilities. Evergreen Fire and Security is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, training, and career development programs. Powered by JazzHR fwNMtTaQSy

Job DescriptionCompany Description Public Storage is the self-storage industry leader and we are Hiring Now! Earn $14.00 Per Hour Our Benefits Total Rewards package available to our team: • We work Flexible and Full-Time Schedules between the hours of 9:30am and 6pm (weekends ‘til 5pm), • Employees become eligible for Full-time Benefits by working an average of 20+ hours - Benefits include:, • Medical, Dental, Vision, 401k with match, paid time off, sick time, and flex spending, • Company paid life, accidental death insurance, and exclusive vendor discounts, • Mileage reimbursement is provided when traveling between properties or other work-related tasks, • Our Property Managers have the opportunity to earn performance-based bonuses!Job Description, • Our Property Managers get to work independently at multiple locations; spending time both inside and outside, • We assess customer storage needs and make suggestions, including selling packing and moving supplies, • Daily storage unit inspections to confirm inventory and availability helps make sure spaces are ready to rent, • Auditing cash drawers and making bank deposits are part of the daily business, • We help keep our customers current with payments and make reminder and collection calls when required Physical Requirements: • Ability to transport lift/move items weighing up to 35 pounds, • Our property managers should be able to walk in/around facilities spending up to 50% of their time in outdoor environments, including climbing stairs and opening large doors., • Performing cleaning and daily maintenance tasks: including sweeping/mopping interior areas and maintain exterior grounds/curb appeal clean and free of debris.Qualifications Experience: Successful candidates come from a variety of customer service centered sales environments including retail, restaurant, fast food or other service-based companies. Transportation: Our employees are required to have a valid driver’s license and utilize their own vehicle to travel between different work locations and/or while conducting other work-related business. (mileage reimbursement available) Additional Information More about Us! Public Storage was recognized as A Great Place to Work by the Great Place to Work Institute. Our employees have also voted us as having Best Career Growth, ranked us in the Top 5% for Work Culture, and in the Top 10% for Diversity and Inclusion. Apply Now for an opportunity to join Public Storage and be a part of the self-storage industry’s #1 team! REFD0277REM2

If the idea of getting paid to voice your opinions, test products, and contribute to market innovation appeals to you - and you're looking for flexible, work from home opportunities — this is your chance!.

Walmart is seeking Stockers / Backroom / Receiving Associates to support store operations by unloading deliveries, organizing inventory, stocking shelves, and preparing merchandise for the sales floor.Associates are responsible for unloading trucks, sorting and organizing merchandise in the backroom

If the idea of getting paid to voice your opinions, test products, and contribute to market innovation appeals to you - and you're looking for flexible, work at home part-time opportunities — this is your chance!.

Lowe’s is seeking Receivers / Stockers to support store operations by unloading deliveries, organizing inventory, stocking shelves, and preparing merchandise for the sales floor.Receivers and Stockers are responsible for unloading trucks, checking in shipments, organizing merchandise in the backro

If the idea of getting paid to voice your opinions, test products, and contribute to market innovation appeals to you - and you're looking for flexible, work at home part-time opportunities — this is your chance!.

Sam’s Club is seeking Member Frontline Cashiers to assist members with purchases, operate registers, and provide customer service at the front end of the store.Frontline Cashiers are responsible for scanning merchandise, processing cash and card payments, verifying memberships, assisting members w

Goodwill is seeking Store Clerks / Cashiers to assist with retail store operations, customer service, and processing sales transactions.Store Clerks are responsible for operating the cash register, handling cash and card payments, assisting customers with purchases, answering questions, stocking she

Walmart is seeking Cashiers / Front End Associates to assist customers with purchases, operate registers, and support front-end store operations.Front End Associates are responsible for scanning items, processing cash and card payments, handling returns and exchanges, bagging items, assisting custom

Drivers are also responsible for tracking inventory, completing route paperwork, and ensuring stores are properly stocked according to company merchandising standards.

Drivers work scheduled delivery blocks but may also have opportunities to accept additional blocks or be on-call for available delivery routes when demand is high.

All other duties as assigned/li/ulpExperience/Qualifications:/pulliMinimum Degree Required: High School education or equivalent experience/li/ulpKnowledge, Skills, and Ability:/pulliAbility to calculate figures such as discounts and make change to customers/liliAbility to communicate in a friendly a

All work is performed on-site in accordance with DOD/MDA Policies, Directives,and Processes Work is performed indoors with some potential risks to safety and health hazardsrelated to electronics. In addition, a satisfactory background screening, negative drug test, positive references and proof of i

If you want to work in an environment that is fun, challenging, and rewarding, then Mary Spears - State Farm Agent may be the right fit for you! If you are self-motivated, possess an entrepreneurial spirit and have a desire to win and achieve results, please consider joining our team. Come work with

Works with patients to obtain updated information and accurately enters information in Practice Management System (eClinical Works) using proper English grammar, spelling, and syntax. Reviews Practice Management System (eClinical Works) for information that needs to be updated. Must be able to toler

Will need someone that can be flexible and work around the needs for the site. Demonstrated effective experience building a variety of professional relationships and working collaboratively in a team environment.

If you have the desire to be challenged, work in a fast-paced, fun environment and to grow your career - look no further. Work With Fun, Motivated People. You will greet customers, run the register, cashier, make purchase suggestions and sometimes work with our food program.