Tree jobs in San Diego, CaliforniaCreate job alerts

C.R. England is now hiring CDL-A Truck Drivers for a Dollar Tree Route!Drivers Average $78,000 Annually* - $220 per Load Pay • Valid CDL-A and 3+ months of current experience required, • This lane is not suitable for students, recent grads, or trainees This Dedicated Dollar Tree Route Offers: • Home weekly for a 34-hour reset, • Drivers average $78,000 annually; $1,500 weekly*, • CPM, • $220 per load pay, • Top-of-the-line automatic transmission sleeper trucks pulling 53' trailers Benefits Include: • Full benefits package for you and your family, • 401(k) participation, • Paid time off & bonus incentives, • Unlimited cash referral program Deliver Excellence with C.R. England - Apply Today! Route Details: Dedicated Dollar Tree fleet is hiring CDL-A Drivers. Drivers will deliver dry freight and unload full truck loads using a roto cart and a lift gate, averaging 3 loads per week. Loads begin in Phoenix, AZ, delivering to AZ, UT, and some Southern CA. On this route drivers get home weekly with a 34-hour rest period. Drivers will park their vehicle at home or a secure location. Send in your application today and become part of this dynamic and welcoming team! Requirements: • Valid CDL-A and 3+ months of current experience required, • This lane is not suitable for students, recent grads, or trainees, • Must be 21 years or older, • Must be able to pass a DOT drug screen Better Pay, Home Time, and Miles - Apply Now! Pay Disclaimer:* The job information and data provided here are for informational purposes only, are based in whole or in part on estimates, and do not represent any type of promise or prediction of future performance or employment. PAST PERFORMANCE AND THE INFORMATION CONTAINED HERE ARE NO GUARANTEE OF FUTURE PAY RESULTS, REVENUE, MILES, OR HOME TIME. NO RIGHT TO EMPLOYMENT, CONTINUED EMPLOYMENT, SPECIFIC EMPLOYMENT, OR A MINIMUM AMOUNT OF MILES OR HOME TIME, OR SPECIFIC PAY AMOUNT IS GUARANTEED OR CREATED BY THIS DATA OR THE USE OF THIS SITE. ANY AMOUNTS IN ANY CATEGORIES ON THIS SITE WILL NOT REFLECT ACTUAL FUTURE RESULTS. Your actual pay, mileage, and home time will vary from these numbers depending on many factors, which may include tenure-based pay rates, your fleet, how hard you work, company performance, and how much you drive, among other factors. Because precise rate of pay can be difficult to guarantee in various pay structures common in the transportation industry, you are only guaranteed applicable minimum wage for hours worked in a given pay period. Click here for additional disclaimer information and additional detail about how this data is generated.

Siro Diagnostics, Inc. is seeking an experienced Principal Design Quality Engineer to support a specific product development and design quality project related to our point-of-care molecular diagnostics platform. This is a project-based independent contractor role. The contractor will support design controls, risk management, design verification and validation, and related quality activities needed to advance product development and transfer readiness. The expected commitment is approximately 40 hours per week, with an anticipated hourly rate of $70 to $90 per hour, depending on experience. This role is ideal for someone with deep hands-on experience in medical device or molecular diagnostics quality systems who can quickly step into a fast-moving startup environment and help drive critical design quality deliverables. Responsibilities may include: • Support and ensure compliance with design control requirements for new product development, • Support design verification and validation activities, including review of protocols, reports, and related documentation, • Lead or support risk management activities, including hazard analysis, DFMEA, PFMEA, fault tree analysis, risk-benefit analysis, and risk management planning and reporting, • Serve as a subject matter expert in design controls, risk management, verification, validation, and quality system requirements, • Support transfer to production by assisting with process validation requirements, including IQ, OQ, PQ, and PPQ, using appropriate statistical tools and techniques, • Participate in the development, review, and approval of product requirements, product specifications, test protocols, reports, and design traceability matrices, • Develop or review QC methods, sampling plans, procedures, statistical techniques, and test method qualifications, • Review and approve verification, validation, process validation, and equipment qualification documentation, • Support compliance with applicable requirements, including FDA 21 CFR Part 820, ISO 13485, ISO 14971, and internal quality standards, • Interact with suppliers on product development projects and quality issues, • Support nonconformance and CAPA activities, including investigations, root cause analysis, corrective actions, and preventive actions, • Lead or participate in internal and external audits, as needed, • Maintain current knowledge of regulatory requirements and standards applicable to molecular diagnostic test development and release Requirements: • Bachelor’s degree in a scientific or engineering field, such as Chemistry, Microbiology, Biology, Biochemistry, Engineering, or a related discipline, • Minimum 8 years of relevant experience, or master’s degree with 5 or more years of relevant experience, • Hands-on experience with design verification, design validation, and process validation, • Strong experience with design controls, risk management, CAPA, nonconformance systems, root cause investigations, and manufacturing process improvement, • Experience with quality system requirements in a regulated medical device, diagnostics, or life sciences environment, • Startup experience or point-of-care molecular diagnostics experience strongly preferred, • Experience with process, QMS, or supplier auditing preferred, • Lean Six Sigma, Certified Quality Engineer, or Certified Quality Auditor certification preferred, • Experience with SmartSolve, JAMA, Box, and Microsoft Office tools a plus, • Strong written and verbal communication skills, • Ability to work independently, move quickly, and deliver high-quality work under tight timelines Contract Details: • Role type: Independent contractor, • Project: Design quality, design control, risk management, and V&V support for a point-of-care molecular diagnostics development project, • Expected time commitment: Approximately 40 hours per week, • Hourly rate: $75 to $90 per hour, depending on experience, • Location: San Diego, CA preferred, • Duration: Project-based, to be defined based on project needs Environment and Physical Requirements: This role is expected to be performed primarily in an indoor office or lab-adjacent environment. The role may require: • Remaining in a stationary position for extended periods, • Repeating motions such as typing or using a computer, • Communicating with others to exchange information, • Occasionally moving, lifting, carrying, pushing, or pulling objects up to 20 pounds About Siro Diagnostics: Siro Diagnostics is developing point-of-care molecular diagnostic technology. Our team is focused on building a high-quality platform that supports fast, reliable, and accessible diagnostic testing.

Job Summary We are seeking a hands-on BSP / System Engineer to support our Video Conferencing and Smart Camera product lines in the North America market. This role will work closely with global R&D teams, customers, chipset vendors, and manufacturing partners to support system bring-up, platform integration, issue debugging, and product delivery. The ideal candidate has strong experience with embedded Linux or Android-based platforms, BSP customization, device drivers, system integration, and hardware/software debugging. Experience with Qualcomm platforms, camera systems, video pipeline, or edge AI devices is highly preferred. Key Responsibilities Platform Bring-up and BSP Support • Support BSP bring-up on embedded Linux / Android / RTOS-based platforms., • Debug bootloader, kernel, device tree, drivers, power, memory, storage, USB, PCIe, I2C, SPI, UART, GPIO, and related low-level interfaces., • Support platform customization based on customer product requirements., • Work with chipset vendors and internal R&D teams to resolve platform-level issues. System Integration • Support integration of camera, audio, display, connectivity, sensors, and peripheral modules., • Assist in system-level debugging across hardware, firmware, OS, middleware, and application layers., • Support performance optimization, stability improvement, and power consumption tuning., • Work with hardware teams on board-level debugging and validation. Video Conferencing and Smart Camera Product Support • Support system-level issues related to video conferencing devices, smart cameras, AI camera platforms, and edge devices., • Collaborate with camera, audio, AI, and application teams to ensure end-to-end product functionality., • Support product validation, field issue analysis, customer issue reproduction, and root cause analysis. Customer and Cross-functional Support • Serve as a local technical interface for North america customers during project execution., • Collect customer requirements, clarify technical issues, and coordinate with global engineering teams., • Support on-site debugging, customer demos, pilot runs, and manufacturing bring-up when needed., • Prepare technical reports, issue summaries, test results, and RCA documentation. Required Qualifications • Bachelor’s degree or above in Computer Engineering, Electrical Engineering, Computer Science, or related field., • 8+ years of experience in embedded system development, BSP, system integration, or platform engineering., • Strong experience with embedded Linux and/or Android system architecture., • Hands-on experience with bootloader, Linux kernel, device tree, drivers, and board bring-up., • Familiarity with common hardware interfaces such as USB, I2C, SPI, UART, GPIO, PCIe, MIPI, SDIO, and Ethernet., • Strong debugging skills using oscilloscopes, logic analyzers, serial logs, kernel logs, adb, gdb, or similar tools., • Ability to analyze complex system issues across hardware and software boundaries., • Strong communication skills and ability to work with global teams across time zones. Preferred Qualifications • Experience with Qualcomm platforms such as QCS, QRB, SDM, SDA, SA, or similar embedded platforms., • Experience with video conferencing devices, smart cameras, IP cameras, AI cameras, or edge AI products., • Familiarity with camera pipeline, MIPI CSI, ISP, V4L2, GStreamer, media framework, or Android camera HAL., • Experience with audio, display, Wi-Fi/Bluetooth, Ethernet, or sensor integration., • Experience with manufacturing support, EVT/DVT/PVT, NPI, or field issue debugging., • Experience working directly with enterprise customers or OEM/ODM partners. Ideal Candidate Profile The ideal candidate is a practical problem solver who can quickly understand system architecture, reproduce issues, identify root causes, and coordinate with both local customers and remote engineering teams. This person should be comfortable working in a fast-moving product environment where debugging, communication, and ownership are equally important.

Job Description Job Title: Groundsman Company: IC Trees Location: San Diego, CA Employment Type: Part-Time, with potential for Full-Time Salary: $17-$22/hour – Based on Experience About IC Trees: IC Trees is a leading provider of professional tree care and landscaping services, committed to delivering the highest standards of service to our clients. We take pride in the safety, efficiency, and expertise we bring to every job, ensuring the health and longevity of trees while creating beautiful outdoor spaces. Our team is growing, and we are seeking motivated individuals to join us as Groundsmen. Job Description: We are looking for a hardworking and safety-conscious Groundsman to support our tree care and landscaping crews. As a Groundsman, you will work under the supervision of certified arborists, providing assistance with tree trimming, removal, and clean-up activities. You will also be responsible for maintaining a clean and safe work environment on-site, handling equipment, and ensuring that all operations run smoothly. Key Responsibilities: • Assist tree climbers and arborists in trimming, pruning, and removing trees., • Clear branches, limbs, and debris from the work site., • Operate and maintain various equipment such as chainsaws, chippers, and leaf blowers., • Load and unload tools, machinery, and materials., • Ensure safety protocols are followed and help set up warning signs, cones, and barriers at job sites., • Perform routine maintenance and inspection of equipment., • Support landscaping tasks, such as mulching, planting, and irrigation, as needed. Requirements: • Previous experience as a groundsman or in tree care/landscaping is a plus, but not required., • Ability to work in various weather conditions and perform physically demanding tasks., • Familiarity with tools and equipment such as chainsaws, wood chippers, and stump grinders is a bonus., • Strong attention to safety and ability to follow detailed instructions., • Valid driver’s license with a clean driving record., • Willingness to learn and grow in the tree care and landscaping industry., • Ability to lift 50 pounds or more and work at heights when necessary. Benefits: • Competitive salary based on experience., • Opportunities for growth and training in tree care and landscaping., • Ongoing safety training and certification programs., • A positive and supportive work environment., • Free early access to your pay through Homebase. How to Apply: If you are passionate about tree care, enjoy working outdoors, and are ready to join a dynamic team, we’d love to hear from you! Please submit the following: • Your resume (including relevant experience and certifications), • A brief statement about why you’d be a great fit for our team, • Your current availability Send your application to: info@ictrees.com Subject Line: Groundsman Application – [Your Name] Qualified candidates will be contacted to schedule an interview. Thank you for your interest in IC Trees. We look forward to growing with you! By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Duties & Responsibilities: Establishes crews, assigns responsibilities, and ensures that the work is completed in accordance with DN Tanks safety/quality programs and meets budgeted man-hours. Reviews and understands the overall job schedule and budget. This information assists with developing crew sizes and durations. Reads and interprets tank/contract drawings to ensure work is performed according to specifications. Checks and confirms wall penetration locations and anchor tree elevations. Reviews prestressing drawing to confirm the sequencing of prestressing and number of spools needed. In the absence of the Superintendent, starts up/sets up a project including, mobilizing and erecting the tower, inspecting the tank, and setting up the connex trailer. In the absence of the Superintendent, closes out a project by dismantling the machine, properly loading the machine onto trucks, organizing and securing the connex and calling all equipment off rent. Leads the quality control (QC) program by taking ownership of the quality inspections. Leads the equipment inspections and promptly notifies the Superintendent of any concerns or damage with the machine. Properly documents required work orders and reports them to the Superintendent or Equipment Manager. Works with the Superintendent or Project Manager to complete all required paperwork for the project including SIS schedule, equipment and QC photos, weekly safety inspection report, timesheets, and equipment inspections. Coordinates with Purchasing and Warehouse Departments on the delivery of equipment and supplies as needed. Collaborates with the Superintendent or Project Manager to plan daily and long-term work schedule and complete weekly short interval schedules. Actively pursues training on Superintendent duties such as improving computer skills, scheduling, payroll administration, documentation logs, weather checks, etc. This includes using the iPad and the laptop computer. Understands the entire concrete supply program including calculating water/cement ratios, figuring dosage amounts for admixtures, mixing trucks to proper slump, and testing for slump and air content. Utilizes, studies, and maintains (i.e. --- notes and highlighted sections) own set of tank drawings. Inventories material upon delivery to ensure components comply with the tank drawings prior to signature. Inventories spare parts and ensures wear and tear parts are stocked in the connex. Reports the use of any parts to the Equipment Manager in order to re-stock onsite supply Participates in a daily closeout meeting with the Superintendent providing an update on the day's activities and needs for the following day. Leads the APSP Safety Program and ensures that all personnel onsite are following DN Tanks safety policies. Responsible for communicating to all personnel onsite that they have stop work authority. Develops task hazard analysis (THA) and makes the necessary changes specific to the job site conditions and reviews with the crew. Identifies hazards, takes action to correct them, and is responsible for recognizing those who do the same in accordance with the Award of Excellence (AOE) Program. Responsible for maintaining a clean and organized jobsite. Maintains all certifications in compliance with DN Tanks Safety & Equipment Programs. Identifies labor shortages, recruits local help, and identifies potential long-term field employees. Provides timely performance feedback on field employees to determine skill level, areas of required training and readiness for promotion and/or improvements.

Qualcomm Technologies, Inc. Engineering Group, Engineering Group > Software Engineering General Summary: Qualcomm’s new Data Center Business Unit (BU) is looking for an experienced Senior Software Engineer to contribute to the design, development, and commercialization of software/firmware solutions for Cloud Edge and Data Center machine learning (ML) use cases running on premium-tier high-performance silicon. You will work closely with internal and cross-functional teams and contribute to the advancement of critical technologies such as ML acceleration, process in memory, memory management and virtualization. The candidate should have a background in embedded software development such as board support packages (BSP), device driver development, RTOS, secure boot, TrustZone technology, low-speed peripheral interfaces (I2C/SPI/UART), chipset power blocks, clock tree management, PCIe and efficient data movement using DMA Minimum Qualifications: • Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. • 2+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc. Required Skills and Aptitudes • Proficient with development in C including debug and testing, preferably using GNU/LLVM tools, on embedded platforms using stop-mode debug tools such as JTAG/SWD, • Skilled with BSP development including device driver development, board bring-up, RTOS, secure boot design & TrustZone architecture, • Experience with development and build tools for applications running within Embedded Linux environment, • Proficient with unit testing for C development, • Adept with RTOS fundamentals, SoC architecture (core, cache, memory, bus architecture, IOs, etc.), common hardware blocks and multi-threaded programming, • Experience with Source Code and Configuration management tools such as git/Gerrit, • Ability to work in a structured software development environment while contributing to novel designs, • Have willingness and flexibility to work as part of a high-caliber international/multi-site team, • Demonstrate excellent English communication skills (written and verbal) and positive interpersonal skills Desirable Skills and Aptitudes • Familiar with ML frameworks such as PyTorch, JAX and Llama.cpp, • Familiar with interfaces such as PCIe, LPDDR, USB and UFS, • Familiar with implementing Reliability, Accessibility and Serviceability (RAS) through use of technologies such as ECC & PCI AER fields, • Familiar with low-speed interfaces such as I2C, SPI, SPMI, AVSBus & PMBus, • Familiar working with software running on Qualcomm’s QuRT RTOS (ARM Cortex-A CPUs and Hexagon DSPs), • Familiar with on-chip Middleware for communication, logging and power control, including Qualcomm’s Core SW Infra (e.g., Glink, QDSS, SOC power control algorithms such as DVFS, DCVS), • Experience working with microprocessor building blocks like microprocessor execution levels, interrupt controller & timers, • Software development and debug tools including compilers, profilers, source control systems, emulators, JTAG and serial debuggers, and logic analyzers Requirements: • 2+ years of work experience with low level C programming Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail or call Qualcomm's toll-free number found . Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. EEO Employer: Qualcomm is an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or any other protected classification. Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. Pay range and Other Compensation & Benefits: $111,300.00 - $166,900.00 The above pay scale reflects the broad, minimum to maximum, pay scale for this job code for the location for which it has been posted. Even more importantly, please note that salary is only one component of total compensation at Qualcomm. We also offer a competitive annual discretionary bonus program and opportunity for annual RSU grants (employees on sales-incentive plans are not eligible for our annual bonus). In addition, our highly competitive benefits package is designed to support your success at work, at home, and at play. Your recruiter will be happy to discuss all that Qualcomm has to offer – and you can review more details about our US benefits at this _. If you would like more information about this role, please contact _.

Qualcomm Technologies, Inc. Engineering Group, Engineering Group > GPU ASICS Engineering General Summary: As a member of the Graphics team, the successful applicant will help develop new flows/methodologies and algorithms to improve power, performance and area (PPA) on state-of-the-art GPU cores while working closely with the graphics microarchitecture design and implementation teams. The successful candidate will possess basic understanding of RTL design and ASIC design flow from RTL to GDS such as synthesis, static timing analysis, formal verification, physical design, ECO generation and verification. They will collaborate with multiple functional teams including design, technology, power, implementation, sign-off and post-silicon to drive PPA improvements into GPU cores. Knowledge and experience in the following is a definite advantage: · Implementation and delivery of GPU cores from RTL to GDSII · Semi-custom design flow and methodology development · Identifying areas for flow and process improvements · Verilog and System-Verilog languages · RTL synthesis using physically aware tools · Design constraint management for power, timing, clocking, interfaces · Formal Verification for RTL-netlist and netlist-netlist checks · Clock Tree Analysis and Optimization · ECO methods for functional and timing fixes · Managing design goals and tradeoffs in power, performance, and area Preferred Qualifications • At-least 5-7 years of experience developing methodologies for PPA improvement, • Basic understanding of digital design and RTL development, • Hands on experience with EDA tools such as Synopsys Fusion Compiler, Synopsys RTL-Architect, PrimePower,PrimeTime and Prime Closure, • Script writing experience in UNIX shell, Python, Perl and/or TCL, • Excellent interpersonal and analytical skills as well as ability to work independently, • Highly motivated, excellent team spirit, obsession with deliverable quality and customer oriented Minimum Qualifications: • Bachelor's degree in Computer Engineering, Computer Science, Electrical Engineering, or related field and 4+ years of Software Engineering, Hardware Engineering, Systems Engineering, or related work experience. OR Master's degree in Computer Engineering, Computer Science, Electrical Engineering, or related field and 3+ years of Software Engineering, Hardware Engineering, Systems Engineering, or related work experience. OR PhD in Computer Engineering, Computer Science, Electrical Engineering, or related field and 2+ years of Software Engineering, Hardware Engineering, Systems Engineering, or related work experience. Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail or call Qualcomm's toll-free number found . Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. EEO Employer: Qualcomm is an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or any other protected classification. Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. Pay range and Other Compensation & Benefits: $161,800.00 - $242,600.00 The above pay scale reflects the broad, minimum to maximum, pay scale for this job code for the location for which it has been posted. Even more importantly, please note that salary is only one component of total compensation at Qualcomm. We also offer a competitive annual discretionary bonus program and opportunity for annual RSU grants (employees on sales-incentive plans are not eligible for our annual bonus). In addition, our highly competitive benefits package is designed to support your success at work, at home, and at play. Your recruiter will be happy to discuss all that Qualcomm has to offer – and you can review more details about our US benefits at this _. If you would like more information about this role, please contact _.

Job DescriptionDescription: As our Resort Maintenance Technician, you will perform routine and preventative maintenance to maintain the physical integrity of our Resorts while providing excellent customer service to our guests. This position may require flexible scheduling availability. Requirements: Job Requirements: • Complete minor repairs to rental homes and facilities as needed, • Complete routine maintenance and minor emergency electrical repairs, plumbing, sewage, construction, and street repair, • Inspect the irrigation system regularly to ensure it is working properly and repair as necessary, • Inspect playground area and equipment, pool/spa area, and other recreational amenities to ensure everything is in good condition and make minor repairs as needed, • Ensure the resort is presentable and inviting at all times and that it adheres to Island's curb appeal standards, • Regularly treat for weeds, weed whips, rake leaves, plant flowers/shrubs, spreads mulch/woodchips/stones, trim shrubs and hedges, cut down and remove tree limbs damaged by adverse, • weather conditions, and perform other lawn care services as necessary, • Ensure trash/debris is picked up daily from common areas and streets on a daily basis, • Empty common area trash containers as needed, • Clean resort amenities which may include clubhouses, tennis courts, pickleball courts, resort offices, restrooms, laundry areas, bath houses, and maintenance garage, • Maintain vacant sites, including strap-downs and removal of trash and debris, • Remove snow from community streets, parking lots, building entrances, and other areas Island is responsible for maintaining, where applicable. (May include using a truck with a plow, spreading, • salt, snow blowing, and/or shoveling.), • Complete checklists of the physical condition of resort sites prior to and after guest occupancy, • Assist Resort Manager with the supervision of service contractors, • Report all maintenance issues and concerns that may be identified while performing daily duties to the manager, • Ensure all resort streets and public access routes are free of hazards, • Maintain resort pool(s), tests chemical levels, and adjust appropriately, where applicable, • Maintain resort vehicles and equipment, • Follow safety procedures while performing duties, including safely operating vehicles when moving from site to site and picking up supplies Job Qualifications: • Basic computer proficiency, including the ability to use email and the internet, • Strong communication and customer service skills, • Ability to provide legible written reports, • Proficient skills in operating various hand tools, power equipment, and commercial machinery, • General knowledge of janitorial work, plumbing, electrical, and grounds maintenance, • Demonstrated knowledge of and broad experience in general maintenance techniques and repair work, • Ability to respond to resort needs during non-business hours while on-call, • 6 months previous maintenance experience in a campground or RV resort is preferred The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our properties and employee discounts within your brand, • Discounts for friends and family within your brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Summary We are seeking a hands-on BSP / System Engineer to support our Video Conferencing and Smart Camera product lines in the North America market. This role will work closely with global R&D teams, customers, chipset vendors, and manufacturing partners to support system bring-up, platform integration, issue debugging, and product delivery. The ideal candidate has strong experience with embedded Linux or Android-based platforms, BSP customization, device drivers, system integration, and hardware/software debugging. Experience with Qualcomm platforms, camera systems, video pipeline, or edge AI devices is highly preferred. Key Responsibilities Platform Bring-up and BSP Support • Support BSP bring-up on embedded Linux / Android / RTOS-based platforms., • Debug bootloader, kernel, device tree, drivers, power, memory, storage, USB, PCIe, I2C, SPI, UART, GPIO, and related low-level interfaces., • Support platform customization based on customer product requirements., • Work with chipset vendors and internal R&D teams to resolve platform-level issues. System Integration • Support integration of camera, audio, display, connectivity, sensors, and peripheral modules., • Assist in system-level debugging across hardware, firmware, OS, middleware, and application layers., • Support performance optimization, stability improvement, and power consumption tuning., • Work with hardware teams on board-level debugging and validation. Video Conferencing and Smart Camera Product Support • Support system-level issues related to video conferencing devices, smart cameras, AI camera platforms, and edge devices., • Collaborate with camera, audio, AI, and application teams to ensure end-to-end product functionality., • Support product validation, field issue analysis, customer issue reproduction, and root cause analysis. Customer and Cross-functional Support • Serve as a local technical interface for North america customers during project execution., • Collect customer requirements, clarify technical issues, and coordinate with global engineering teams., • Support on-site debugging, customer demos, pilot runs, and manufacturing bring-up when needed., • Prepare technical reports, issue summaries, test results, and RCA documentation. Required Qualifications • Bachelor’s degree or above in Computer Engineering, Electrical Engineering, Computer Science, or related field., • 8+ years of experience in embedded system development, BSP, system integration, or platform engineering., • Strong experience with embedded Linux and/or Android system architecture., • Hands-on experience with bootloader, Linux kernel, device tree, drivers, and board bring-up., • Familiarity with common hardware interfaces such as USB, I2C, SPI, UART, GPIO, PCIe, MIPI, SDIO, and Ethernet., • Strong debugging skills using oscilloscopes, logic analyzers, serial logs, kernel logs, adb, gdb, or similar tools., • Ability to analyze complex system issues across hardware and software boundaries., • Strong communication skills and ability to work with global teams across time zones. Preferred Qualifications • Experience with Qualcomm platforms such as QCS, QRB, SDM, SDA, SA, or similar embedded platforms., • Experience with video conferencing devices, smart cameras, IP cameras, AI cameras, or edge AI products., • Familiarity with camera pipeline, MIPI CSI, ISP, V4L2, GStreamer, media framework, or Android camera HAL., • Experience with audio, display, Wi-Fi/Bluetooth, Ethernet, or sensor integration., • Experience with manufacturing support, EVT/DVT/PVT, NPI, or field issue debugging., • Experience working directly with enterprise customers or OEM/ODM partners. Ideal Candidate Profile The ideal candidate is a practical problem solver who can quickly understand system architecture, reproduce issues, identify root causes, and coordinate with both local customers and remote engineering teams. This person should be comfortable working in a fast-moving product environment where debugging, communication, and ownership are equally important.

Zip Sales Role/h2pZip is the AI platform for enterprise procurement built for humans and agents working together. The worlds most influential enterprises trust Zip, including T-Mobile, OpenAI, AMD, Mars, Dollar Tree, and more. Your Role/h3ullipYoure a closer, trusted advisor, product consultant yo

As a Merchandise Assistant Manager at Dollar Tree, you'll join our Store Manager in leading a dynamic team of associates and creating positive experiences for the communities we serve. At Dollar Tree, we make a difference in the lives of our customers every day by exceeding their expectations and de

National City, California 91950-7420 07986 Dollar Tree.

The Tree Care Service (TCS) Business Developer (BD) manages the tree care services pipeline from prospecting to closing. Tree Care Services Business Developer. Work with Landscape Maintenance Account Managers and Branch Manager to develop Tree Care programs and estimates for existing clients.

We're seeking an Assistant Store Manager to join our team to help with store operations, customer service and team development.Duties include, but are not limited to, the following:.Assist with store functions and day-to-day store activities.Help customers in a positive, approachable manner and addr

We're seeking an Assistant Store Manager to join our team to help with store operations, customer service, and team development.Duties include, but are not limited to, the following:.Assist with store functions and day-to-day store activities.Help customers in a positive, approachable manner and add

Job DescriptionDescription: About the Job Job Title: Landscaping Crew Lead. Classification: Full-Time. Pay: $19-$21 per hour DOE. Report To: Field Supervisor / Operations Coordinator. MUST have a valid California Driver's License Job Summary: The Crew Lead position performs a variety of general labor and maintenance duties as assigned. The lead performs leadership functions by setting an example of work ethic and quality of work to general laborers. Some work functions may include raking, trash clean up, shrub and plant care, weeding, trenching, plant and tree installation, irrigation, trimming, and pruning, supervising crew members, and other duties. Will act as a leader and is an example for others while working on client properties. The ideal candidate has two years of landscape experience and holds a valid California Driver's License with an acceptable driving record. About our Company: We believe that a diverse culture means more than just recognizing our differences. A truly diverse culture allows you the opportunity and freedom to be yourself, we are committed to celebrating diversity and to fostering a diverse working community. Duties and Responsibilities: • Coordinates and maintains schedule for work crews with Field Supervisor and Operations Coordinator., • Supervises work crews., • Responsible for job quality., • Completes monthly assessments of vehicles and equipment., • Reports concerns or necessary maintenance., • Conducts safety training for crew members., • Conducts weekly “tailgate” safety meetings., • Communicates service issues to Branch Superintendents / Office., • Maintains and submits daily time sheets., • Has some client contact/coordination., • Communicates completion of work orders.Requirements: Knowledge, Skills, and Abilities: • Recent landscape construction and/or landscape maintenance experience in a lead role., • Knowledge of the construction industry is helpful., • Knowledge of equipment and required maintenance., • Ability to supervise and schedule work for others., • Good communication skills., • Must be highly organized and detail-oriented., • Ability to establish priorities, work independently, and proceed with objectives without supervision., • Ability to analyze and solve problems. Credentials and Experience: • One to two years’ experience in field operations., • Minimum 3 years’ experience in landscape and irrigation-related experience required., • Current and valid CA DL with a clean driving record., • Must clear pre-employment background check and drug test. Physical Requirements: • Constant need (100% during production time) to be on feet., • Can bend/stoop/squat/kneel., • Climb Stairs., • Push or pull., • Reach over the Shoulder., • Grasp and grip., • Lifting, and carrying up to 50 lbs., • 50-75 lbs. - Requires assistance., • 75-150 lbs.- Requires assistance. We Offer: • Weekly Pay, • Holidays (6) + California Sick Days (5), • Medical, Dental, Vision, and 401(K), • Accrued PTO (40 hours per year) This employer participates in E-Verify and will provide the federal government with your form i-9 information to confirm that you are authorized to work in the U.S. Want to work in a friendly, fast-paced environment where opportunities for advancement abound? We believe that a diverse culture means more than just recognizing our differences. A truly diverse culture allows you the opportunity and freedom to be yourself. We are committed to celebrating diversity and to fostering a diverse working community. All offers of employment are contingent upon successfully passing a pre-employment background check, drug screening, and physical endurance test relevant to the job requirements. We are an equal opportunity employer and consider all qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, or any other protected characteristic under applicable law. Equal Opportunity Employer D/F/M/V.

Job Description Job Summary Maintenance associates maintain the proper working order of the hotel, hotel property and grounds. Responsibilities • Approaches all encounters with guest and employees in a friendly, service-oriented manner., • Complies with company, hotel, and brand standards which encourage a safe and efficient hotel operation., • Refurbishes furniture and fixtures within guest rooms, including cabinets, tables, chairs, doors, windows and counters., • Paints, stains, and/or otherwise finishes furniture and fixture within the hotel., • Maintains front entrance area, ensuring the parking lot and/or garage and street entrance are kept in a manner presentable to guests and free from trash, litter and/or other debris., • Follows pre-established procedures which ensure the security of inventory and par levels of company assets such as tools, supplies, equipment, furniture, televisions, etc., • Reports all lost and found items according to the standard established., • Reports all unsafe conditions or malfunctioning equipment to the General ManagerQualifications, • 1-2 years related work experience, • Ability to stand and walk for 8 hours in a day. Ability to lift push pull up to 50lbs,, • Must be able to follow verbal directions, and complete assigned tasks on schedule.Benefits/Perks, • Excellent benefits include: Medical, dental, life, PTO, and 401k with company match for full-time associates, • We offer an excellent travel discount program., • Opportunity to grow, we promote from withinExcel Hotel Group is a fully integrated property ownership, management, and development company enjoying exciting growth. We believe that our family-driven culture is the backbone of our company.

Job DescriptionBenefits: • Dental insurance, • Vision insurance, • Employee discounts, • Flexible schedule Job Summary The Housekeeping Houseperson (day or night shift) is responsible for cleaning and maintaining various public areas inside the hotel and outside of the hotel, delivering amenities and requested items to guests, cleaning guest rooms when specially requested by guests, helping with laundry, monitoring indoor corridors of hotel, monitoring outside premises, and to verbally warn guests if there are any complaints (ie: noise complaints, etc). Responsibilities • Approaches all encounters with guests and employees in a friendly, service-oriented manner., • Complies with company, hotel, and brand standards which encourage a safe and efficient hotel operation., • Completes all stocking and organizational duties, including but not limited to, stocking guest supplies, cleaning supplies, and linen for housekeeping cart set-up., • Carries a communication device (pager, radio, etc.) and responds to all calls., • Delivers guest requests i.e. extra towels, amenities, etc. to guests in guest rooms., • Removes any trash and/or debris from corridors, public areas, parking lot, pool area, etc., • Keeps all rooms, closets, hallways, and public areas and clean, neat and vacuumed; including pool area and public restrooms.Qualifications, • 1-2 years related work experience, • Ability to stand and walk for 8 hours in a day. Ability to lift push pull up to 50lbs,, • Must be able to follow verbal directions, and complete assigned tasks on schedule. Benefits/Perks • Excellent benefits include: Medical, dental, life, PTO, and 401k with company match for full-time associates, • We offer an excellent travel discount program., • Opportunity to grow, we promote from withinExcel Hotel Group is a fully integrated property ownership, management, and development company enjoying exciting growth. We believe that our family-driven culture is the backbone of our company.

Drivers will deliver dry freight and unload full truck loads using a roto cart and a lift gate, averaging 3 loads per week. England is now hiring CDL-A Truck Drivers for a Dollar Tree Route!. Drivers average $78,000 annually; $1,500 weekly*.

Trim shrubs and low trees to shape and improve growth or to remove damaged leaves, branches, or twigs using shears, pruners, or gas-powered hedge trimmers.

Dollar Tree - 7908 El Cajon Boulevard - Responsibilities: Assist customers with questions and recommendations; Manage sales transactions at cash register; Maintain security of cash and protect company assets; Keep the store well-stocked, and recover merchandise; Maintain cleanliness and restock bath

Dollar Tree - 4210 Bonita Road - Responsibilities: Assist with daily store operations including merchandising and stocking; Operate cash register and process sales transactions; Receive merchandise and unload trucks; Maintain store cleanliness and safety; Protect company assets and maintain security

This position typically pays $12 to $15 per hour, with opportunities for overtime pay, holiday pay, and performance-based raises depending on location and experience.

The Grounds Person Tree Care I role supports tree trimming and removal operations by assisting with ground-level tasks, including clearing brush, chipping branches, and managing debris disposal. Perform basic ground-level tree care operations in support of pruning, removal, and maintenance activitie

We are currently looking to add a dynamic Plant Health Care Technician to our passionate team of tree care professionals. Ability to complete the Davey Tree Qualified Plant Health Care Tech training program upon hire. Cultivate your career and fertilize your future!.

The Grounds Person Tree Care I role supports tree trimming and removal operations by assisting with ground-level tasks, including clearing brush, chipping branches, and managing debris disposal. Perform basic ground-level tree care operations in support of pruning, removal, and maintenance activitie

Flexible schedule - As a Non-profit Bookkeeper at North Tree Bookkeeping, you will: Maintain accurate financial records and prepare financial reports for the organization; Monitor and manage budget and cash flow to ensure efficient use of funds; Reconcile bank accounts and credit card statements; Pr

Job Description Company: The Davey Tree Expert Company Locations: San Diego, CA Additional Locations: N/A Work Site: On Site Req ID: 221897 Position Overview Trim and remove trees, remove unwanted, diseased or dying limbs on trees, or to affect the health and safety of trees or surrounding areas by performing the following duties. Pay Compensation: $25.00 - $35.00 Job Duties What You’ll Do: • Climb Trees! Davey offers both DdRT/MRS and SRT/SRS climbing systems., • Operate as an active crew member with supporting ground crew and crew leader., • Perform all aspects of tree pruning and removal services safely and skillfully for clients., • Including but not limited to:, • Pruning, thinning and removing deadwood throughout the tree canopy, • Installation of cables, bracing and lightning protection systems, • Removal of hazardous trees, • Properly maintain, prepare and operate all tools and equipment including chainsaws, chippers, aerial lifts and more. Be part of the most progressive greenspace stewardship team in the industry. How high you grow depends on you! Qualifications What We’re Seeking: • Love of the outdoors, • Preferred: Background in Forestry, Horticulture, Landscaping, or working at heights, • Ability to complete the Davey Tree Trimmer Orientation Program upon hire, • Ability to complete the Davey First Aid, CPR and defensive driving course upon hire, • Preferred: Relevant pesticide and related licenses and certificates, if required by state law Additional Information What We Offer: * • Paid time off and paid holidays, • Opportunities for advancement, • All job specific equipment and safety gear provided, • 401(k) retirement savings plan with a company match, • Employee-owned company & discounted stock purchase options, • Group Health Plan, • Employee referral bonus program, • Locations throughout US in major cities and desirable areas, • Career Development Program supported by Industry Expert Safety Specialists & Skills Trainers, • Scholarship Program for Children of Employees, • Charitable matching gift program *all listed benefits available to eligible employees Company Overview Invest in your future. Join one of the largest employee owned companies in the nation! Davey has a unique culture that focuses on the open exchange of ideas, community partnerships, a commitment to safety, and delivering unrivaled client service while acting as industry leaders in horticultural and environmental services. We are currently looking to add a dynamic Climbing Arborist to our passionate team of tree care professionals. Your office is outdoors, and you get a new view every day! Divisional Overview The Davey Tree Expert Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to protected class, including race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national or ethnic origin, marital or familial status, disability, status as a protected veteran, status as an Aboriginal or Indigenous person, or other classification protected by law. The Davey Tree Expert Company provides research-driven tree services, grounds maintenance and environmental consulting for residential, utility, commercial and environmental partners in the U.S. and Canada. We care about our clients, each other and the world around us. We offer the resources, size and stability of a big company while maintaining the culture, entrepreneurial spirit and feel of a small one. We invest in our employees by offering industry-leading training, technology and benefits that lead to a rewarding and safe work experience at all levels. Wherever you want to grow your career, there’s a place for you at Davey. To learn more, visit Davey.com. Accommodations: If requested by employee or otherwise as required by law, reasonable accommodations will be made to enable employees with disabilities to perform essential job functions. If you need assistance at any time, please contact us at 1-877-411-7601 or at Recruiting@davey.com. Employment Type: Permanent Job Type: Full Time Travel Expectations: Up to 25%

Job Description Consider joining a firm with a strong foundation that cares about both our clients and you! We've been in business for over 25 years! We offer competitive compensation along with excellent benefits!! Privately owned insurance agency is seeking a Commercial Lines Account Manager to act as a Floater, supporting all three of our vertical groups-Construction, Landscape & Tree, and Nonprofit/Social Services. The intent is for this individual to assist where needed to service and manage these commercial lines accounts and eventually be paired with a producer or producers as business needs arise. Duties will include managing client communications, keep track of all necessary documentation, help clients understand their coverage, and ensure all relevant data is properly tracked in our secured systems. Benefits Annual Base Salary + Bonus Opportunities Health Insurance Life Insurance Paid Time Off (PTO) Retirement Plan Hands on Training Mon-Fri Schedule Career Growth Opportunities Evenings Off Vision Insurance Dental Insurance Ten Paid Holidays Responsibilities • Market new business and account renewals obtaining competitive coverage/cost ratios for the clients., • Submission of renewal business to various markets and maintaining a productive relationship with multiple insurance company underwriters and staff. Working with team members to execute all renewals in a timely manner. Generation of accurate renewal submission proposals., • Manage day to day account transactions including additions/deletions of vehicles, property acquisitions, exposure changes, contract reviews, coverage analysis and program recommendations with client interaction., • Give clear answers to clients on any coverage or billing questions including information on rate fluctuations or policy changes. Consult with clients to help process quotes and issue renewals or any updates needed to current policies., • Effectively manage preparation and production of all elements of presentations for client meetings and properly representing the company. Address client questions and identify next steps as appropriate. Requirements • 5+ years experience as a Commercial Account Manager managing their own book of business, • California Property and Casualty license, • Agency Management software experience; Applied EPIC (preferred), • Knowledge of computer software packages, including Microsoft Office (Word, Excel, Outlook), • Professional verbal and written communication skills, • Self-motivated, self-disciplined, and self-confident

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:This role is hands-on and highly collaborative, requiring experience with safety-critical software systems and familiarity with airborne software safety processes (DO-178C, ARP4761, ARP4754A, and/or MIL-HDBK-516C). It requires strong software system intuition, and a software engineering background. You will serve as a safety authority across the Hivemind platform team, ensuring that safety considerations are built into architecture decisions, requirements, code, and verification strategies from the outset - not bolted on at the end. What you'll do: • Safety requirements development:, • Derive and author safety requirements from system-level hazard analyses, functional hazard assessments (FHAs), and customer/regulatory safety objectives., • Translate safety requirements into clear, testable software requirements aligned with the appropriate Design Assurance Level (DAL) or software criticality classification., • Collaborate with requirements engineers, system architects, product managers, software developers, and test engineers to ensure safety requirements flow consistently and traceably through product and component requirements., • Requirements traceability and verification support:, • Maintain bidirectional traceability from safety requirements through design, implementation, and verification., • Collaborate with QA and test teams to define verification strategies, review test cases for safety coverage, and confirm that safety requirements are demonstrably satisfied prior to release., • Documentation and modeling:, • Author clear, well-structured safety documentation and contribute to system models (SysML/MBSE) with a safety lens - capturing safety-relevant behavior, failure propagation paths, and mitigations., • Produce artifacts that are defensible to airworthiness authorities and understandable to both technical and non-technical stakeholders., • Hazard and safety analysis:, • Lead and support safety analysis activities including Functional Hazard Assessments (FHA), Failure Mode and Effects Analysis (FMEA), Fault Tree Analysis (FTA), and Failure Mode and Effects Summary (FMES) for Hivemind software components and autonomy pipelines., • Identify safety-relevant failure conditions, assess severity, and drive mitigation strategies into the system architecture., • Cross-stack safety integration:, • Work closely with engineers across the full product stack - including foundational software, autonomy and AI algorithms, simulation and test infrastructure, and GUI layers - to ensure safety requirements are correctly allocated to software components and that the system architecture supports safe operation under both nominal and off-nominal conditions., • Certification Evidence Support:, • Collaborate with teams to ensure that process adherence, artifact completeness, and traceability are continuously demonstrated through development artifacts rather than assessed solely through manual reviews., • Support the generation, organization, and validation of certification evidence, ensuring it is accurate, complete, and defensible for internal and external airworthiness assessmentsRequired qualifications:, • Bachelor’s degree with approximately 7+ years of relevant experience, or Master’s degree with approximately 5+ years of relevant experience, in Systems Engineering, Software Engineering, or a closely related technical field with demonstrated experience on safety-critical airborne software., • Experience working within or applying safety-critical standards (e.g., DO-178C, MIL-HDBK-516C, ARP4754A, ARP4761), • Experience deriving safety requirements and allocating them to software components at defined criticality levels., • Experience in software development workflows in modern languages (C++, Python, Go, etc.) and software engineering practices, including CI/CD, automated testing, configuration management, and software lifecycle processes., • Familiarity with requirements management tools such as DOORS, Jama, or Jira, and with maintaining traceability across a safety software lifecycle., • Experience working cross-functionally with software engineers, test engineers, and product managers in a fast-paced, mission-critical environment., • Strong organizational, communication, and cross-functional collaboration skills; ability to translate safety obligations into actionable engineering guidancePreferred qualifications:, • Familiarity with MBSE practices and system modeling tools (Cameo, SysML) as applied to safety-critical architectures., • Prior experience with military airworthiness authority (USAF, Army, Navy) coordination., • Exposure to autonomy or robotic software systems and the safety challenges unique to non-deterministic or ML-enabled components., • Experience creating software tooling to automate safety data management, • Hands-on experience working with CI/CD pipelines, automated test frameworks, and build systems to design and implement development workflows that continuously generate verifiable evidence of system behavior and support certification objectives.#LI-DM2#LD Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description City Tree Christian School is a wonderful community of teachers, staff, and families working together to educate our children in a loving Christian environment. We are a ministry of First Presbyterian Church committed to integrating educational excellence with the Bible-based teachings of Jesus Christ. We are an ethnically and socio-economically diverse school located in downtown San Diego. About 200 students attend our school-age infants through eighth grade. Our school is a member of the Association of Christian Schools International (ACSI) and accredited by the Western Association of Schools and Colleges. Seeking individuals who are available on an on-call basis to work in the classroom, playground, and during lunchtime. Pay depends on education and experience. We desire dependable, mature, and responsible people who are able to integrate their love for Christ into interactions with children. Qualifications: Preschool substitute teachers must have at least six units in child development with more in progress. K-8 substitute teachers must have a Bachelor's degree; a teaching credential and teaching experience are also preferred. K-8 substitute teaching assistants must have significant experience working with children in a professional setting; college degree preferred. All substitutes must have experience working with children. Job Posted by ApplicantPro

Job Description This position currently has a sign-on bonus of $2,000 + paid PTO + paid benefits and 401K! Plant Health Care Specialist What We Offer • Compensation: Competitive pay based on experience, skill level, and responsibilities, • Benefits: Health and dental insurance, paid time off, 401(k) Savings Plan, and Flexible Spending Plan, • Time Off: Time off to support your work/life balance, • Career Growth & Development: We invest in your success with training, education, and internal growth opportunities, • Team & Collaborative Environment: Join a supportive team that works alongside some of the best trained and equipped professionals in the industry - with a focus on learning, growth, quality, and safety Position Summary As a Plant Health Care Specialist, you will be responsible for monitoring, diagnosing, and treating tree and shrub health issues within a specific territory. A typical day may include: • Inspecting plant material and identifying pests, diseases, or other concerns, • Selecting and applying the most appropriate treatments to promote plant health, • Preparing written diagnostic reports and educating clients about their landscape, • Operating spray and application equipment safely and effectively, • Working independently to ensure the highest level of customer satisfaction This role is ideal for someone who loves problem-solving, enjoys working outdoors, and takes pride in protecting and enhancing the natural environment. About You You are passionate about plants, eager to learn, and motivated to grow within the field of plant health care. You bring: • A degree in Arboriculture, Urban Forestry, Horticulture, Plant Science, Plant Pathology, Environmental Sciences, Landscape Management, Turfgrass—or related experience (preferred), • The ability to work independently with responsibility and care, • Excellent written, verbal, and listening skills to engage with clients effectively, • Willingness to learn plant/tree identification and safe equipment use, • Commitment to completing required training and obtaining necessary certifications and licenses, • Authorization to lawfully work in the U.S., • A valid driver’s license with the ability to operate service-line vehicles About SavATree SavATree was founded 45 years ago with a mission to preserve trees threatened by the gypsy moth epidemic. Since then, we’ve grown into a nationwide leader in tree, shrub, and lawn care services. Unlike companies that focus on removal, our work is rooted in preservation and care. We are a values-driven organization built on teamwork, integrity, respect, and a relentless commitment to making a positive impact. When you join us, you’ll find a collaborative, competitive, and caring environment where your contributions matter. As we like to say: When you work here, you thrive here. Physical Requirements The physical demands of this role must be met to successfully perform the essential functions of the job. While performing these duties, employees may be required to lift and/or move up to fifty (50) pounds. Equal Opportunity SavATree is an Equal Opportunity Employer and a Drug-Free Workplace. We are committed to creating a diverse environment where all employees feel valued and respected.

Job DescriptionDescription: Deadline for applying is 20 April 2026. Anticipated start date is 28 July 2026. This position is contingent upon contract award The Ascendancy Group’s Mission To be the unequaled provider of special operations forces (SOF) and Intelligence Community focused technical, service, and training-based solutions. Security Requirement: · A SECRET security clearance is required. Roles and Responsibilities: • Mechanics shall be capable of performing all levels of repairs on automotive, heavy truck and construction equipment both in the shop or field with no supervision., • Understand and follow all regulations related to safety, handling hazardous materials, and facility access., • Perform inspections, preventive maintenance, and repairs identified during initial inspections and as per the guidance recommended by the Original Equipment Manufacturer (OEM) and/or the NAVFAC P-300., • Conduct mandated 120 calendar day cycle for completing general maintenance and safety inspections on each piece of equipment., • Schedule all equipment for service every 120 calendar days or sooner in the event the vehicle accumulates high mileage within the normal service cycle., • Manage inventory list of equipment by Shop Location, Equipment Identification Number, Make, Model, Year, type of fuel and current mileage., • Pick up vehicles requiring service from a location designated by the Government’s Transportation Officer for each respective Shop Location., • Perform maintenance and repair to Government owned equipment with total numbers varying by +/-5% during the performance period., • Conduct scheduled maintenance in three specific levels identified as “A”, “B”, and “C” based on mileage or time. Standard vehicle safety inspections shall be completed as a specific task on every scheduled maintenance Shop Repair Order (SRO)., • Conduct direct liaison with the government to discuss access to equipment, maintenance schedules, and use of Government furnished equipment (GFE) if provided., • Perform welding, metal forming, sheet metal work, minor body, and fender repairs.?, • Provide maintenance and repair on ground support equipment such as, but not limited to, off-road utility vehicles, golf carts, lawn mowers, pressure washers, tree and brush trimming equipment, generators, compressors, hydraulic attachments and other small portable engine powered tools used to support grounds maintenance work. Requirements: • Must possess a valid state driver’s license from their state of residency to operate motor vehicles., • Have a minimum of six (6) years’ experience as an Original Equipment Manufacturer (OEM) mechanic at truck tractor dealership, commercial fleet service shop, intermediate or depot level military maintenance facility or have E7 – E8 level military experience with diesel engines over 400 hp or Civil Engineering Support Equipment., • Possess a Master Mechanic Automotive Service Excellence (ASE) certification in medium-heavy trucks or military tactical wheeled vehicles or completing of a “C” level military technical school. ASE requirement can be waived with five years of experience as a Depot Level Shop lead Mechanic or Supervisor., • Be able to use Asset Works LLC software “Fleet Focus” to record maintenance actions, track time and document parts ordered and installed., • Must have the ability to fix all tactical, expeditionary, and non-tactical equipment in the shop; provide expert input on maintenance issues; and provide oversight to less experienced personnel., • Shall be available during standard business hours to address issues and workflow.? Preferred: • Commercial Driver’s License (CDL) rated at more than 26,000lbs Gross Vehicle Weight The Ascendancy Group (TAG) was founded on and thrives based on relationships, reputation, and trust. We are passionate about everything we do. One hundred percent of our government-focused teammates are former members of the Department of War or the Intelligence Community who still believe in supporting our nation. We offer like-minded individuals the opportunity to continue working in small teams on unique and challenging problem sets that further our nation's security. If you possess the experience, qualifications and drive required for this position, please APPLY NOW for consideration! Requirements:

Job DescriptionAbout People Search People Search is an award-winning web development division within the PeopleConnect portfolio that serves over one million customers nationwide. Our cutting-edge technology connects, informs, and protects people both online and offline. Our websites consistently rank among the top 500 most visited in the United States, and our products have been featured by the Discovery Channel, Mashable, Vice, Entrepreneur, and Business Insider, and even made a cameo in a Disney animated comedy. A pioneer of new ideas, we continually develop and deploy innovative strategies and solutions. Our people and culture are innovative, creative, collaborative, and highly talented. Together, we make things happen. About the Role PeopleConnect is seeking a Senior Data Scientist to leverage advanced analytics and machine learning to drive marketing performance, customer insights, and revenue growth across our subscription-based platforms. This role partners closely with marketing, product, analytics, and executive leadership to uncover actionable insights, build predictive models, and influence business decisions through data-driven strategy. You will operate with meaningful autonomy and will be expected to translate complex analysis into clear, decision-ready recommendations. This is an office-based role with a hybrid schedule, including one flexible work-from-home day per week, based in our San Diego office. This is a senior individual contributor role for a data scientist who thrives in a performance-driven, marketing-focused B2C environment and is comfortable owning analytical initiatives from hypothesis through implementation. Core ResponsibilitiesModeling & Advanced Analytics • Develop, implement, and maintain predictive and propensity models to forecast customer behavior, including purchase likelihood, churn risk, and campaign responsiveness., • Apply statistical and machine learning techniques to large-scale datasets to drive measurable business outcomes., • Design, validate, and monitor models to ensure ongoing performance, reliability, and business relevance., • Translate model outputs into actionable business strategies that improve conversion, retention, and lifetime value.Marketing & Experimentation, • Partner with marketing and product teams to optimize campaign performance through data-driven insights., • Design and execute A/B tests and other controlled experiments to measure incremental impact and improve marketing effectiveness., • Identify opportunities to improve targeting, segmentation, and personalization strategies., • Balance speed, cost, and analytical rigor to support timely business decisions.Data Integrity & Insight Delivery, • Ensure data integrity, quality, and compliance with applicable privacy regulations (including GDPR and CCPA)., • Build dashboards, reports, and visualizations that clearly communicate findings to technical and non-technical stakeholders., • Challenge assumptions, surface risks, and provide independent analytical perspective to senior leadership., • Maintain strong documentation and governance practices across models and analyses.What This Role Is Not, • Not a purely reporting or dashboard-production role., • Not a junior or supervised modeling position., • Not a data engineering or infrastructure-only role., • Not a theoretical research position detached from business impact., • Not a marketing execution role without analytical ownership.Desired Skills and Experience, • 5+ years of experience in data science, marketing analytics, or a related quantitative role, preferably in a B2C subscription or performance-driven environment., • Proven experience building and deploying predictive models, including logistic regression, tree-based models, and gradient boosting techniques., • Strong proficiency in Python or R for data analysis and modeling., • Advanced SQL skills for querying and manipulating large datasets., • Experience designing and interpreting experiments, including A/B testing and causal analysis., • Strong understanding of statistical methods, machine learning algorithms, and model validation techniques., • Experience translating analytical findings into strategic recommendations for business stakeholders., • Ability to operate independently in a fast-paced, cross-functional environment., • Bachelor’s or Master’s degree in Data Science, Statistics, Mathematics, Computer Science, Economics, or a related quantitative field.Preferred Qualifications, • Experience working with cloud platforms such as AWS, Google Cloud, or Azure., • Experience with customer segmentation, lifetime value modeling, or attribution modeling., • Familiarity with marketing analytics platforms and CRM systems., • Advanced degree in a quantitative discipline.Salary Base Range: $120,700 – $177,200 This position is exempt (salaried). The range reflects what the company reasonably expects to pay for the position. Actual compensation depends on experience, qualifications, and scope of responsibility. Benefits • 100% company-paid Medical, Dental, and Vision coverage, • Generous bonus package, • Unlimited Vacation policy, • Paid Sick Leave and Paid Holidays, • 401(k) Plan with company match, • Daily company-paid lunches for onsite employees, • Paid Parental Leave and Dependent Care support, • Student Loan Repayment Program and 529 Education Savings Plan, • Training and Education Reimbursement, • Paid Parking, • Pet Insurance and Employee Referral Rewards, • Dog-friendly office, complimentary snacks, beverages, and on-site gym The Company’s Applicant and Worker Privacy Notice can be found here. PeopleConnect is an equal opportunity employer. Local area candidates are encouraged to apply. Please note we are not able to offer visa sponsorship, visa transfer, or corp-to-corp arrangements. Note for Principal Agencies: Principal agents should not forward resumes to PeopleConnect, as we will not be responsible for any fees arising from resumes submitted without a prior written and signed agreement and authorized job order in place.

Job Description What We Offer At SavATree, your success is our priority. Here’s how we invest in you: • Compensation: Minimum guarantee plus unlimited commission potential, with most Sales Arborists earning more than $130,000 annually. Total compensation typically ranges from $50,000 to $250,000+ based on territory performance., • Benefits: Health, dental, vision, life, and disability insurance, plus a 401(k) with company match., • Time Off: Time-off to support your work/life balance, • Training & Development: Comprehensive sales, leadership, and technical training. Financial support for becoming an ISA Certified Arborist., • Recognition & Rewards: Annual Winner’s Circle all-expense-paid trip for top performers, employee referral bonus programs, and career growth opportunities., • Tools for Success: Company vehicle program and the chance to work with some of the most advanced, safety-focused crews in the industry. Position Summary As a Commercial Sales Arborist at SavATree, you will be the trusted advisor to property owners, ensuring the health, beauty, and longevity of their landscapes while developing and growing your assigned territory. You will apply your expertise to diagnose landscape needs, create solutions, and estimate projects while building strong relationships with clients and prospects. In this role, you will: • Develop and grow your assigned territory through relationship building and prospecting., • Inspect and diagnose landscapes, and provide expert recommendations., • Prepare estimates and coordinate with crews to ensure work meets SavATree’s quality and safety standards., • Ensure client satisfaction and obtain referrals., • Represent SavATree at community and industry events, trade shows, and presentations. About You You are: • Passionate about working outdoors and making a positive impact on the environment., • Skilled at building relationships and solving customer challenges., • Motivated to learn, grow, and adapt in a fast-paced, high-growth company., • Known for integrity, attention to detail, and delivering on promises., • Excited to collaborate, problem-solve, and work hands-on in the field., • Ideally holding a degree in Arboriculture, Urban Forestry, Horticulture, Plant or Environmental Sciences, or Landscape Management — but equivalent experience is also valued. About SavATree SavATree was founded 45 years ago with a mission to preserve trees threatened by the gypsy moth epidemic. Since then, we’ve grown into a nationwide leader in tree, shrub, and lawn care services. Unlike companies that focus on removal, our work is rooted in preservation and care. We are a values-driven organization built on teamwork, integrity, respect, and a relentless commitment to making a positive impact. When you join us, you’ll find a collaborative, competitive, and caring environment where your contributions matter. As we like to say: When you work here, you thrive here. Physical Demands These physical demands must be met to successfully perform the essential functions of this job. While performing the duties of the role, employees are subject to frequently lifting and/or moving up to fifty (50) pounds. Equal Opportunity SavATree is an Equal Opportunity Employer and a Drug-Free Workplace. We are committed to fostering an inclusive environment where all employees are valued and respected.

Job DescriptionDuties & Responsibilities: Establishes crews, assigns responsibilities, and ensures that the work is completed in accordance with DN Tanks safety/quality programs and meets budgeted man-hours.Reviews and understands the overall job schedule and budget. This information assists with developing crew sizes and durations. Reads and interprets tank/contract drawings to ensure work is performed according to specifications.Checks and confirms wall penetration locations and anchor tree elevations.Reviews prestressing drawing to confirm the sequencing of prestressing and number of spools needed.In the absence of the Superintendent, starts up/sets up a project including, mobilizing and erecting the tower, inspecting the tank, and setting up the connex trailer.In the absence of the Superintendent, closes out a project by dismantling the machine, properly loading the machine onto trucks, organizing and securing the connex and calling all equipment off rent.Leads the quality control (QC) program by taking ownership of the quality inspections.Leads the equipment inspections and promptly notifies the Superintendent of any concerns or damage with the machine. Properly documents required work orders and reports them to the Superintendent or Equipment Manager.Works with the Superintendent or Project Manager to complete all required paperwork for the project including SIS schedule, equipment and QC photos, weekly safety inspection report, timesheets, and equipment inspections.Coordinates with Purchasing and Warehouse Departments on the delivery of equipment and supplies as needed.Collaborates with the Superintendent or Project Manager to plan daily and long-term work schedule and complete weekly short interval schedules.Actively pursues training on Superintendent duties such as improving computer skills, scheduling, payroll administration, documentation logs, weather checks, etc. This includes using the iPad and the laptop computer.Understands the entire concrete supply program including calculating water/cement ratios, figuring dosage amounts for admixtures, mixing trucks to proper slump, and testing for slump and air content.Utilizes, studies, and maintains (i.e. --- notes and highlighted sections) own set of tank drawings.Inventories material upon delivery to ensure components comply with the tank drawings prior to signature.Inventories spare parts and ensures wear and tear parts are stocked in the connex. Reports the use of any parts to the Equipment Manager in order to re-stock onsite supplyParticipates in a daily closeout meeting with the Superintendent providing an update on the day’s activities and needs for the following day.Leads the APSP Safety Program and ensures that all personnel onsite are following DN Tanks safety policies.Responsible for communicating to all personnel onsite that they have stop work authority.Develops task hazard analysis (THA) and makes the necessary changes specific to the job site conditions and reviews with the crew.Identifies hazards, takes action to correct them, and is responsible for recognizing those who do the same in accordance with the Award of Excellence (AOE) Program.Responsible for maintaining a clean and organized jobsite.Maintains all certifications in compliance with DN Tanks Safety & Equipment Programs.Identifies labor shortages, recruits local help, and identifies potential long-term field employees.Provides timely performance feedback on field employees to determine skill level, areas of required training and readiness for promotion and/or improvements.

Job DescriptionDescription: Deadline for applying is 20 April 2026. Anticipated start date is 28 July 2026. This position is contingent upon contract award The Ascendancy Group’s Mission To be the unequaled provider of special operations forces (SOF) and Intelligence Community focused technical, service, and training-based solutions. Security Requirement: · A SECRET security clearance is required. Roles and Responsibilities: • Mechanics shall be capable of performing all levels of repairs on automotive, heavy truck and construction equipment both in the shop or field with no supervision., • Understand and follow all regulations related to safety, handling hazardous materials, and facility access., • Perform inspections, preventive maintenance, and repairs identified during initial inspections and as per the guidance recommended by the Original Equipment Manufacturer (OEM) and/or the NAVFAC P-300., • Conduct mandated 120 calendar day cycle for completing general maintenance and safety inspections on each piece of equipment., • Schedule all equipment for service every 120 calendar days or sooner in the event the vehicle accumulates high mileage within the normal service cycle., • Manage inventory list of equipment by Shop Location, Equipment Identification Number, Make, Model, Year, type of fuel and current mileage., • Pick up vehicles requiring service from a location designated by the Government’s Transportation Officer for each respective Shop Location., • Perform maintenance and repair to Government owned equipment with total numbers varying by +/-5% during the performance period., • Conduct scheduled maintenance in three specific levels identified as “A”, “B”, and “C” based on mileage or time. Standard vehicle safety inspections shall be completed as a specific task on every scheduled maintenance Shop Repair Order (SRO)., • Conduct direct liaison with the government to discuss access to equipment, maintenance schedules, and use of Government furnished equipment (GFE) if provided., • Perform welding, metal forming, sheet metal work, minor body, and fender repairs.?, • Provide maintenance and repair on ground support equipment such as, but not limited to, off-road utility vehicles, golf carts, lawn mowers, pressure washers, tree and brush trimming equipment, generators, compressors, hydraulic attachments and other small portable engine powered tools used to support grounds maintenance work. Requirements: • Must possess a valid state driver’s license from their state of residency to operate motor vehicles., • Have a minimum of six (6) years’ experience as an Original Equipment Manufacturer (OEM) mechanic at truck tractor dealership, commercial fleet service shop, intermediate level military maintenance facility, • OR have E6 – E7 military experience maintaining Civil Engineering Support Equipment., • Possess an Automotive Service Excellence (ASE) certification in diesel engines and at least two (2) other Heavy Truck Categories such as, Drive Train; Brakes; Suspension & Steering; Electrical; Heating & A/C and Preventative Maintenance., • Be able to use Asset Works LLC software “Fleet Focus” to record maintenance actions, track time and document parts ordered and installed., • Have the capacity and technical skills needed to make all levels of repair to suspension, steering, electrical, instrumentation, computer controls, driver controls, brakes, fuel delivery, carburetion and fuel injection, exhaust, and power train systems., • Be capable of repairing electric and manual window mechanisms, vehicle locks, seats, and incorporated electronics., • Be capable of demounting and mounting all sizes of tires and balancing the wheel and tire assembly once mounted. Tire repairs shall include plug insertion, patches, and complete replacement depending upon severity of damage., • Shall be available during standard business hours to address issues and workflow.? Preferred: • Commercial Driver’s License (CDL) rated at more than 26,000lbs Gross Vehicle Weight The Ascendancy Group (TAG) was founded on and thrives based on relationships, reputation, and trust. We are passionate about everything we do. One hundred percent of our government-focused teammates are former members of the Department of War or the Intelligence Community who still believe in supporting our nation. We offer like-minded individuals the opportunity to continue working in small teams on unique and challenging problem sets that further our nation's security. If you possess the experience, qualifications and drive required for this position, please APPLY NOW for consideration! Requirements:

Job DescriptionDescription: Deadline for applying is 20 April 2026. Anticipated start date is 28 July 2026. This position is contingent upon contract award The Ascendancy Group’s Mission To be the unequaled provider of special operations forces (SOF) and Intelligence Community focused technical, service, and training-based solutions. Security Requirement: · A SECRET security clearance is required. Roles and Responsibilities: • Primary focus will be on expeditionary and tactical equipment with additional support to the automotive and heavy truck equipment based on operational priorities., • Mechanics shall be capable of performing all levels of repairs on automotive, heavy truck and construction equipment both in the shop or field with no supervision., • Understand and follow all regulations related to safety, handling hazardous materials, and facility access., • Perform inspections, preventive maintenance, and repairs identified during initial inspections and as per the guidance recommended by the Original Equipment Manufacturer (OEM) and/or the NAVFAC P-300., • Conduct mandated 120 calendar day cycle for completing general maintenance and safety inspections on each piece of equipment., • Schedule all equipment for service every 120 calendar days or sooner in the event the vehicle accumulates high mileage within the normal service cycle., • Manage inventory list of equipment by Shop Location, Equipment Identification Number, Make, Model, Year, type of fuel and current mileage., • Pick up vehicles requiring service from a location designated by the Government’s Transportation Officer for each respective Shop Location., • Perform maintenance and repair to Government owned equipment with total numbers varying by +/-5% during the performance period., • Conduct scheduled maintenance in three specific levels identified as “A”, “B”, and “C” based on mileage or time. Standard vehicle safety inspections shall be completed as a specific task on every scheduled maintenance Shop Repair Order (SRO)., • Conduct direct liaison with the government to discuss access to equipment, maintenance schedules, and use of Government furnished equipment (GFE) if provided., • Perform welding, metal forming, sheet metal work, minor body, and fender repairs.?, • Provide maintenance and repair on ground support equipment such as, but not limited to, off-road utility vehicles, golf carts, lawn mowers, pressure washers, tree and brush trimming equipment, generators, compressors, hydraulic attachments and other small portable engine powered tools used to support grounds maintenance work. Requirements: • Must possess a valid state driver’s license from their state of residency to operate motor vehicles., • Have a minimum of five(5) years’ experience at an Intermediate or depot level military maintenance facility, or have E6 – E7 equivalent military experience maintaining Civil Engineering Support Equipment., • Possess an Automotive Service Excellence (ASE) certification in diesel engines and at least one (1) other Heavy Truck or Military Tactical Vehicle Wheeled Vehicle categories such as Drive Train; Brakes; Suspension & Steering; Electrical; Heating & A/C and Preventative Maintenance. ASE requirement can be waived with five years of experience as a Depot Level Shop lead Mechanic or Supervisor., • Be able to use Asset Works LLC software “Fleet Focus” to record maintenance actions, track time and document parts ordered and installed., • Be capable of maintaining tactical vehicles built by Oshkosh, AM General, Mack, International and Freightliner manufacturers., • Have the capacity and technical skills needed to make all levels of repair to suspension, steering, electrical, instrumentation, computer controls, driver controls, brakes, fuel delivery, carburetion and fuel injection, exhaust, and power train systems., • Be capable of repairing electric and manual window mechanisms, vehicle locks, seats, and incorporated electronics., • Be capable of demounting and mounting all sizes of tires and balancing the wheel and tire assembly once mounted. Tire repairs shall include plug insertion, patches, and complete replacement depending upon severity of damage., • Shall be available during standard business hours to address issues and workflow.? Preferred: • Commercial Driver’s License (CDL) rated at more than 26,000lbs Gross Vehicle Weight The Ascendancy Group (TAG) was founded on and thrives based on relationships, reputation, and trust. We are passionate about everything we do. One hundred percent of our government-focused teammates are former members of the Department of War or the Intelligence Community who still believe in supporting our nation. We offer like-minded individuals the opportunity to continue working in small teams on unique and challenging problem sets that further our nation's security. If you possess the experience, qualifications and drive required for this position, please APPLY NOW for consideration! Requirements:

Your positive, friendly disposition and eagerness to get things done make you the right person for our Customer Service Associate II position.Join our team today and let's create an inviting shopping experience for our customers.Your Role: As a Customer Service Associate II, you'll be responsible f

Job Description Crew Lead Tree Climber What We Offer At SavATree, your success is our priority. Here’s how we invest in you: • Compensation: Competitive pay based on experience, skill level, and responsibilities., • Benefits: Health and dental insurance, paid time off, 401(k) Savings Plan, Flexible Spending Plan, and an Equipment Account., • Time Off: Time-off to support your work/life balance, • Training & Development: Extensive training opportunities, including leadership development and continuing education support in the industry., • Tools for Success: Access to industry-leading equipment, climbing gear, and safety-focused crews., • Team Environment: Our Tree Care Team works alongside some of the best trained and equipped teams in the industry, with an emphasis on quality and safety. About SavATree SavATree was founded 45 years ago with a mission to preserve trees and protect the natural landscapes we all enjoy. Since then, we've grown into a nationwide leader in tree, shrub, and lawn care services. We're a values-driven organization built on teamwork, integrity, respect, and a shared commitment to the environment. We pride ourselves on offering a collaborative and supportive work culture where your expertise is valued, and your career path is clear. As we like to say: When you work here, you thrive here. About the Role As a Tree Climber with SavATree, you’ll be a key member of our General Tree Care Team. This team works on a variety of tree care tasks, including pruning, removals, and cabling. You’ll apply your expertise in climbing, pruning, and safety to ensure the health and beauty of our clients’ landscapes. The Crew Lead position offers additional responsibilities for those who demonstrate leadership qualities and want to guide a team. In this role, you will: • Perform high-quality tree care services, including pruning, removals, and cabling for trees and shrubs, • Climb trees safely using proper techniques, ropes, saddle, and ladders, • Operate chainsaws, aerial lifts (bucket trucks), and other tree care equipment effectively, • Apply ANSI A300 Pruning Standards and ANSI Z safety practices in all tasks, • Ensure proper pruning cuts and techniques, preserving the health and structure of trees, • Assist in tree removals and utilize ropes, spikes, and other equipment as needed for safe takedowns, • Identify hazards and perform safety checks after, during, and after each job, • Perform aerial rescues if necessary, ensuring safety in high-risk situations, • Maintain strong communication with team members and clients, ensuring excellent service and safety at all times, • Take ownership of your role, contributing to a positive, safety-focused team culture What We’re Looking For What is Essential: • Valid U.S. driver’s license (CDL is a plus), • Authorization to work legally in the U.S., • Passion for working outdoors and commitment to environmental stewardship Experience: • Proficient in proper pruning techniques for large shade trees and ornamentals, • Strong knowledge of tree and shrub species, including their characteristics, • Comfortable climbing without spurs, • Skilled in adhering to tree care safety standards, • Experienced with chainsaws, aerial lifts (bucket trucks), and other essential tree care equipment Technical Knowledge: • Expertise in proper pruning cuts, branch collars, and chainsaw operations (for trees up to 50 feet), • Familiarity with ANSI A300 Pruning Standards and ANSI Z safety guidelines, • Ability to perform aerial rescues and apply various climbing techniques, • Comfortable working with a diverse range of tree species, including Oaks, Maples, Hemlocks, Pines, and more Physical Requirements: • Must be able to lift and move up to 50 pounds frequently, • Ability to safely perform climbing and aerial work in varying conditions, • Experience with tree removal, including knowing when to use ropes or spikes for safe takedown · This job requires physical stamina to meet the demands of climbing, lifting, and performing tasks outdoors. You’ll frequently lift and move heavy equipment and must be comfortable working in a variety of weather conditions. Equal OpportunityAt SavATree, we believe in fostering a supportive environment where you can grow and succeed. We offer you the opportunity to advance your career and become an industry expert while working with a team that values both individual and collective success. SavATree is an Equal Opportunity Employer and a Drug-Free Workplace.

This position typically pays $12 to $15 per hour, with opportunities for overtime pay, holiday pay, and performance-based raises depending on location and experience.

An Employee Relations Specialist ensures a positive work environment by managing employee-organization relationships, resolving conflicts, and upholding workplace policies.Their goal is to boost employee satisfaction, improve communication, and support company culture.This role is primarily remote;

Perform professional tree maintenance activities as directed by the Crew Leader by safely performing the following duties:. Able to demonstrate working knowledge of basic climbing knots and rigging devices used in tree trimming and removal operations. Climb trees, using climbing hooks and belts, or

Dollar Tree - 11465 Carmel Mountain Road - Responsibilities: Assist customers with questions and recommendations; Manage sales transactions while working assigned cash register; Maintain security of cash and protect company assets; Keep the store well-stocked, and recover merchandise; Maintain clean