Trabajos contract en FarnworthCrear alertas

We are looking for a Management Accountant to join our Commercial Finance team, you will be responsible for producing monthly management accounts across our key client contracts including joint venture contracts, covering profit and loss account, balance sheet, cash flows, variance analysis, key performance indicators and supporting commentaries in line with agreed SLA and reporting deadlines. • Produce financial statements including P&L accounts, cash flows, variance analysis and commentaries, • Work with commercial colleagues to produce the budgets and forecasts for the contracts, monitoring performance against agreed targets and KPI’s, • Provide accurate and meaningful analysis to the Commercial Finance Manager and sup-porting data to assist with key decision-making at contract level, showing a thorough understanding of the contract, including joint venture arrangements where applicable, • Be responsible for the production of the contract management accounts and reporting model in line with required deadlines, • Work collaboratively as a member of the Contract Finance Team to ensure the execution of the strategic and operational objectives that apply to own area of internal reporting responsibility, • Support Projects as designated, including involvement in joint venture reporting requirements, • Ensure compliance with all financial controls, processes and regulatory framework, including adherence to joint venture agreements and governance requirements, • Proactively own and resolve issues including any business non-compliance through adopting a flexible approach and the creation of innovative solutions, which maintain an acceptable balance between risk, reward, and compliance, • Proactively identify improvements (through root cause analysis), making recommendations and successfully implementing new ways of working gaining the full support of stakeholders and colleagues alike, • Maintain consistent communication with commercial teams, build strong working relationships and ensure alignment on financial performance and business objectives, • Prepare and deliver monthly management accounting packs to commercial teams, presenting key financial insights, variances, and actionable recommendations, • Ensure the team always provide a high level of customer service to both internal and external stakeholders, including joint venture partners, • Qualified/Studying (ACA / CIMA / ACCA), • Accounting experience, ideally in a commercial finance role, • Intermediate / advanced Excel, Power Point and Word, • Excellent understanding and working knowledge of accounting and reporting systems, applicable legislation and the statutory and regulatory framework, • Problem solving and analytical skills, • A continuous improvement mentality with the ability to challenge existing processes, • Awareness of Financial Reporting Standards and other developments within global accounting practices and the ability to apply within the company We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy. Network Plus is an award-winning business delivering essential utility and infrastructure services for the UK’s major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment – we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances.

Nurse Unit Manager When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. Position:Nurse Unit Manager / RGN, RMN, RNLD Care home:Jubilee Heights Location:Bury,BL9 0HE Contract type:Full time (must be flexible, day and night 12 hour shifts) Rate:£24.20 per hour This is an excitin... ZIPC1_UKTJ

11488 42.5-hour Qualified Pharmacy Checking Technician - Permanent contract We are looking to recruit a 42.5-hour Qualified Checking Technician to work in the onsite hub pharmacy at Head Office, Lynstock House, Lynstock Way, Lostock, Bolton, BL6 4SA. The proposed shift pattern is: Monday 15:00-00:00 (30 minutes unpaid break) Tuesday 15:00-00:00 (30 minutes unpaid break) Wednesday 15:00-00:00 (30 minut... ZIPC1_UKTJ

11488 42.5-hour Qualified Pharmacy Checking Technician - Permanent contract We are looking to recruit a 42.5-hour Qualified Checking Technician to work in the onsite hub pharmacy at Head Office, Lynstock House, Lynstock Way, Lostock, Bolton, BL6 4SA. The proposed shift pattern is: Monday 15:00-00:00 (30 minutes unpaid break) Tuesday 15:00-00:00 (30 minutes unpaid break) Wednesday 15:00-00:00 (30 minut... ZIPC1_UKTJ

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Test Equipment Design Support Engineer subcontractors on an initial 6 month contract. This role would suit a candidate who comes from a strong Electronics Engineer OR Production Support Engineer OR Test Systems Designer OR Electronics Design Engineer background. Rate:£65.00 per hour Overtime Rate: Hours worked over t... ZIPC1_UKTJ

Clinical Nurse Manager When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. Position:Clinical Nurse Manager / Deputy Manager (RMN / RNLD) Care home:Jubilee Heights Location:Irwell Street, Bury, BL9 0HE Contract type:Full time, 40 hours per week Rate:£52,464 per annum This is a... ZIPC1_UKTJ

Employment/Education Service Manager \n Across Manchester & Preston\n Up to £42,000\n Full-time, Permanent \n The Role:\n We are looking for a Service Manager to lead the delivery of the CFO Evolution Activity Hubs within community settings based across Manchester and Preston. This is a leadership role, overseeing a team of delivery and support staff to ensure high-quality services for participants. Working closely with delivery staff, stakeholders, and employers, you will drive performance, develop strong local partnerships, and support individuals recently released from custody helping them to settle in post-custody life whilst working towards achieving positive outcomes.\n Key Responsibilities\n\nLead and support a team of activity hub delivery and support staff to meet contract targets.\nEnsure participants are placed into jobs or learning opportunities and sustained in these outcomes.\nManage service delivery in custody, working closely with HMPPS staff and other stakeholders.\nOversee health and safety within custodial environments.\nBuild relationships with employers to meet recruitment and training needs.\nTake responsibility for P&L results, including income targets, productivity, and costs.\nDevelop local partnerships to ensure a wide range of provision and participant referrals.\nEnsure high-quality, compliant services with robust audit trails.\nDrive continuous improvement in delivery, systems, and quality.\nMaintain knowledge of policy, market intelligence, and opportunities.\nDeliver services with integrity, always meeting Health & Safety requirements.About You\n\nStrong people management experience, including direct management in prisons, probation service or working with ex-offenders.\nProven ability to achieve performance results.\nConfident communicator, able to present to prison staff, governors, and stakeholders.\nSkilled at report writing and fluent in ICT use.\nGood understanding of the justice sector, HMPPS, and CFO Evolution programmes.\nKnowledge of people management principles, labour markets, and relevant national/local policies.\nResilient, results-driven, and able to work under pressure.\nA strong team player with the ability to build partnerships and networks.Skills Required\n\nEffective leadership and staff management.\nExcellent organisational and financial management skills.\nStrong communication and networking abilities.\nAbility to interpret MI and financial information to support decision-making.\nCommitment to the values of integrity, empowerment, collaboration, and positive impact.Additional Information\n This role requires a Disclosure and Barring Service (DBS) check and enhanced security clearance. It is a legal offence to apply if you are on the Barred List. You will also be a vehicle driver with access to your own vehicle.\n \n If this sounds like the perfect role for you then please submit your CV.\n \n This vacancy is being handled by Aspire Recruitment. Please be aware we receive a high volume of applications and regularly receive applications from candidates who exceed the job credentials. We will only contact you within the next 14 days if you are selected for interview. \n \n Should you apply for this role, we will process your data as detailed in our

Catering Manager When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. Position:Catering Manager Care home:Jubilee Heights Location:Irwell Street, Bury, BL9 0HE Contract type:Full TIme 40 hours per week Rate:£14.80 per hour Are you an experienced Cook with a flair for creating ... ZIPC1_UKTJ

Team Leader Location: Leigh Rate of Pay: £14.50 per hour (weekly or monthly pay available) Shift Pattern: 34 hours on shift, nights and days and two hours admin. Contract: Fixed term (12 months) We are currently recruiting for an enthusiastic and experienced Team Leader in Healthcare to support the delivery and coordination of a specialist care package for a nine-year-old girl living at home with her p... ZIPC1_UKTJ

World Class Defence Organisation is currently looking to recruit a Head of FCAS Systems Design Co-Ordination ( Systems Engineer Manager ) subcontractor on an initial 6 month contract. This position would suit a candite from the Defence / Aerospace industries and from a Systems Engineering Management background. Rate:£80.00 per hour Location: Bristol, Stevenage or Bolton, depending on your preferenc... ZIPC1_UKTJ

Talent Development Lead Location:Bolton Salary:£38,242 - £42,536(Grade 5) Contract Type:Permanent Benefits:Hybrid working, generous annual leave, birthday day off and much more Join our team as a Talent Development Lead Were looking for a Talent Development Lead (Early Careers) to design, lead and evolve high-quality, inclusive Early Careers programmes across our organisation, including apprenticeshi... ZIPC1_UKTJ

Night Nurse Manager When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. Position:Night Nurse Manager / RGN, RMN, RNLD Care home:Jubilee Heights Location:Bury, BL9 0HE Contract type:Full time (must be flexible, day and night 12 hour shifts) Rate:£24.20 per hour This is an exci... ZIPC1_UKTJ

HGV Technician Ongoing contract Bolton, Greater Manchester Monday to Friday (Days) £32 hour Are you a Heavy Vehicle Technician looking for ongoing contract work in the Greater Manchester area? Would you like to join our growing team of HGV technician contractors providing valuable support to HGV fleet workshops across the UK? If so we would love to hear from you! We are looking for an experienced Cont... ZIPC1_UKTJ

Anti Social Behaviour Officer Location:Bolton Salary:£32,767 - £36,197(Grade 4) Contract Type:Permanent Benefits:Hybrid working, generous annual leave, birthday day off and much more Join our team as an Anti Social Behaviour Officer We are looking for someone who cares about people, fairness, and safe communities. The job title for this vacancy is Anti-Social Behaviour Officer; internally, the role is ... ZIPC1_UKTJ

Independent Prescriber Bolton Treatment and Recovery Service Location:Bolton Working Hours:37 or 21 Hours Contract Type:Permanent Salary:£44,789 - £55,000Please note, we have 2 roles available 1 full time and a 0.6. This vacancy may close early if sufficient applications are received. Please note: The salary listed reflects the full earning potential for this role. Starting salaries depend on experien... ZIPC1_UKTJ

Overview: Our long-standing client is looking to appoint an Engineering Checker / Design Quality Engineer to ensure the quality, accuracy, and consistency of engineering output across the business on a 6-month fixed-term contract (PAYE). This is a critical role focused on validating technical deliverables before release to production, ensuring all designs meet internal standards, customer specificat... ZIPC1_UKTJ

Qualified Social Worker, Looked After Children/Care Leavers Team, Bolton Council Pay rate to £37 per hour Contract role Vitalis are recruiting for an experienced Social Worker to work in a Looked After Chidlren’s/Care Leavers Team in Bolton Council. This is a busy and dynamic team offering a statutory service to Looked After Children, Care Leavers and Homeless Young People; some of whom will have very complex needs. We work with Young People from the age of 16 potentially up to 25 helping them to develop their Pathway into independence.With outstanding communication skills and the ability to engage with resistant Young People you will be committed to improving life chances and outcomes for Care Leavers. You must have excellent skills in assessment, analysis and planning as well as being comfortable in managing complex and challenging needs, risks and behaviours. You should understand the disadvantage faced by Care Leavers and be able to work creatively and collaboratively to redress this balance.Please get in touch for more information. Don’t forget, if this role isn’t the perfect fit, we’re confident we can find one that is. We recruit across a wide range of public sector specialisms, including:Independent Reviewing Officer (IRO) • Best Interest Assessor (BIA), • Multi-Agency Safeguarding Hub (MASH), • Looked After Children (LAC), • Children’s Social Work, • Adult Social Work, • Service Manager, • Head of Service, • Team Manager, • Assistant Team Manager, • A wide range of housing roles, • Careers in SEND in local authoritiesLet us help you take the next step in your career. Get in touch with me today to explore our exciting opportunities!Contact me on or for more information.

Qualified Social Worker, Family Safeguarding Team, Bury Council Pay rate to £39 per hour Contract role Vitalis are recruiting for an experienced Social Worker to work in a Family Safeguarding Team in Bury Council. Bury require 2x Social Workers for the Family Safeguarding Service Family Safeguarding teams hold CP/CiN/Court work3 days in the officePlease get in touch for more information. Don’t forget, if this role isn’t the perfect fit, we’re confident we can find one that is. We recruit across a wide range of public sector specialisms, including:Independent Reviewing Officer (IRO) • Best Interest Assessor (BIA), • Multi-Agency Safeguarding Hub (MASH), • Looked After Children (LAC), • Children’s Social Work, • Adult Social Work, • Service Manager, • Head of Service, • Team Manager, • Assistant Team Manager, • A wide range of housing roles, • Careers in SEND in local authoritiesLet us help you take the next step in your career. Get in touch with me today to explore our exciting opportunities!Contact me on or for more information.

PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester for a time served ELECTRICAL FITTER. This is a contract role although highly likely to be long-term. Rates: £28.35 per hour Umbrella or £21.12 per hour (holiday pay on top of hourly rate) rates rise after 12 weeks to £29.70 per hour Umbrella or £22.12 per hour PAYE Monday - Friday 37 hours + The role will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives Specific responsibilities include: • Certify the product in line with Product Certification procedure, • Demonstrated ability / willingness to certify own work in line with company quality standards, • Maintain product certification and approval via regular audits, • Possess a versatile skill base with the capability to apply these skills across a range of tasks, • Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build, inspection and where relevant test times are met., • Check and complete all paperwork associated with the manufacturing data pack, • Maintain to the highest level, workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process, • Maintain a safe working environment, • Maintain a good housekeeping policy Essential: • Engineering/ craft apprenticeship ESSENTIAL, • Possess experience in electrical wiring and assembly, • IPC 610 certified/ trained preferred, • Previous experience in the aerospace or defence industry would be desirable, • Manual handling training, • Lifting and slinging (including overhead cranes) training, • ESD training

World Class Defence Organisation is currently looking to recruit a Manufacturing Logistics Services Analyst subcontractor on an initial 12 month contract. The role will be 4 days per week onsite. Your office base can be either Stevenage or Bolton (depending on your preference). Contract Duration: 12 months initially and then ongoing.Hourly Rate: £40 per hour (Umbrella). Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’Manufacturing Logistics Services Analyst Job Description:Join us at the forefront of Digital Transformation, where your expertise and support will define the foundation for UK Manufacturing Logistics Services. We are embarking on a bold, group-wide Digital Transformation programme (IMPACT) that will redefine how we work, connect and deliver value across the organisation. The programme focuses on upgrading the SAP Enterprise Resource Planning (ERP) capability from its’ current version - ECC6 to S/4HANA, with the goals of harmonising processes across the group (where applicable) and adopting SAP standard practices.We are seeking a proactive and detail-oriented Manufacturing Logistics Services Analyst to join the Manufacturing UK IMPACT core team. This role will work closely with the Logistics Services lead subject matter expert (SME) to ensure all preparation activities, across Logistics Services UK, are effectively delivered ahead of the ERP implementation. Day to Day responsibilities will include: • Support the lead SME across all preparation activities for the S/4HANA ERP upgrade, • Assist in documenting current-state (AS-IS) Manufacturing logistics processes, • Contribute to gap analysis and future-state (TO-BE) process design, • Coordinate data preparation, cleansing and validation activities including;, • Master data cleansing, • Fixing incomplete records, • Inputting minimum expected inputs for TO BE processes to work effectively (e.g. dimensions, weights etc.), • Removing duplicates, • Validating storage locations and bins etc., • Transactional data cleansing, • Resolve inconsistencies between physical inventory and system stock, • Clean open records, close archived, obsolete, or incorrect transactional records, • Data mapping & transformation activities à Support how legacy data will translate into S/4HANA, • Generation of migration mapping documentation, • Identification of new mandatory fields in S/4, • Support conversion and transformation rules, • Support the data migration definition of inclusion/exclusion rules and criteria for Logistics Services objects, • Support warehouse ORG structure definitions, • Coordinate physical labelling/identification activities, • Coordinate and monitor progress against stock inventory checks North & South, • Support the preparation activities relating to the integration of an Automated storage solution, • Support testing preparation and execution including; test script readiness and data readiness, • Assist in identifying risks, issues and dependencies related to logistics processes, • Contribute to knowledge transfer activities to ensure business readiness before the migrationWhat we’re looking for from you:, • Experience in Manufacturing Logistics, Supply chain or Operations environment, • Exposure to ERP systems (SAP experience preferred, S/4HANA exposure advantageous), • Strong analytical and problem-solving skills, • Experience supporting large-scale transformation or system implementation projects, • Ability to document processes and manage data-related tasksDesirable experience:, • Prior involvement in SAP S/4HANA projects or ERP upgrades, • Prior involvement in SAP S/4HANA Logistics modules; EWM, TM, • Understanding of Manufacturing Logistics processes (e.g. inventory management, warehousing, production supply), • Experience with data migration or data governance activities

World Class Defence Organisation is currently looking to recruit a Component Engineer / Components Cataloguer subcontractor on an initial 6 month contract. This position requires experience of components and parts, MS tools, eye for detail, able to deal with multiple queries in a support environment The role will be predominantly working from home with just 1-2 days a week in the office. Your office base can be either Stevenage or Bolton (depending on your preference). Contract Duration: 6 months initially and then ongoing.Hourly Rate: £50 per hour (Umbrella)Component Engineer Job Description:The Component Engineering department play an important support role not just within the engineering group but also within the wider business. You will be part of a multi-disciplined team completing administration activities, technical advisement, making requests to suppliers and responding to internal queries. You will ensure we deliver a comprehensive component service offering technical advice and ensuring accuracy of data.Responsibilities:Role includes the following responsibilities: • Processing and responding to support queries, • Processing component data (based on Life cycle status, Export Control and REACH/RoHS compliance), • Working within departmental processes completing administration tasks, • Support for Electronic, Electrical, Mechanical or Material commodities, • Support continuous improvement activitiesSkillset/experience required:, • Knowledge and experience of components and parts, • Engineering Degree or relevant experience, • Proficient in MS Office tools, Outlook, Excel, Word, • High concern for order and quality, • Able to deal with multiple issues, tasks and priorities concurrently, • Strong communication skills to facilitate communications with key stakeholders

Obsolescence Manager 6 month contract Based in Bolton Offering up to £60ph Inside IR35 Do you have experience in obsolescence/change management? Do you have experience with electronic/test equipment? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you!As the Onsolescence Manager, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain MOD security clearance. You will be involved in: • Managing Proactive and Reporting Services, • Implementing Strategy for Obsolescence Management, • Technical Assessment working with Engineering teams to manage changes, • Managing Resources and Work load Planning Your skillset may include: • Engineering Degree or relevant experience, • Knowledge and experience of managing Obsolescence, • Knowledge and experience of Electronic Equipment, • Manage discreet work packages preparing bids, controlling costs, and delivering solutions., • Experience of working within a multi-disciplinary team If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Obsolescence Manager 6 month contract Based in Bolton Offering up to £60ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

World Class Defence Organisation based in Bolton is currently looking to recruit a Test Equipment Obsolescence Manager subcontractor on an initial 6 month contract. The role will be a hybrid position of 2 days in office, rest of the week remote.Rate: £60 per hourOvertime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’Location: Bolton Hybrid / Remote working: Hybrid, 2 days per week onsite and the rest remote from home. Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella)Test Equipment Obsolescence Manager Job Description:We have a phenomenal opportunity for experienced Engineers to play a leading role in the support of production activities at our state-of-the-art manufacturing facilities. Working within Production Design Support (PDS) is a highly rewarding role working close to the manufacturing environment helping to shape the design of the products and test equipment, delivering support to our customers.Responsibilities:Role includes the following responsibilities: • Managing Proactive and Reporting Services, • Implementing Strategy for Obsolescence Management, • Technical Assessment working with Engineering teams to manage changes, • Managing Resources and Work load PlanningSkillset/experience required:, • Engineering Degree or relevant experience, • Knowledge and experience of managing Obsolescence, • Knowledge and experience of Electronic Equipment, • You’ll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs., • Manage discreet work packages preparing bids, controlling costs and delivering solutions., • Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation., • Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration.

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Manufacturing Controller subcontractors on an initial 12 month contract. This role requires someone with Stores experience within a manufacturing environment. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a half. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter)Manufacturing Controller Job Description:The Manufacturing Controller role will involve issue, receipt and management of stores and inventory in a stores environment. Loading, control and monitoring of work packages in a manufacturing environment.Responsibilities: • Stock control / storekeeping including shelf life control., • Loading the manufacturing cells with the requisite jobs in accordance with planned lead and cycle times, in order to comply with manufacturing programmes and delivery schedules., • Packing including the use of hand tools. Receiving and issuing of tooling., • Updating computer records., • Kitting activity., • Loading and unloading of Lorries.Skillset/experience required:, • Experience in a stores environment or manufacturing control., • Follow instructions., • Willing to work flexible shift patterns., • Attention to detail., • Work on own with minimal supervision., • Use own initiative., • Manual handling training., • Lifting & Slinging training (Including overhead cranes)., • ESD training.Desirable skills:, • PC skills, including EXCEL., • Fork lift truck licence., • Knowledge of Kanban and 2 bin systems., • Experience with an Enterprise Planning System e.g. SAP.

Highway Infrastructure Manager • Location: Hybrid Day-to-day of the role: • Oversee the technical approval process for new highway infrastructure., • Conduct site inspections to ensure compliance with relevant standards and policies., • Manage the adoption process of highway infrastructure into the public network., • Coordinate with developers, engineers, and local authorities to facilitate smooth project progression., • Ensure all projects align with local and national highway policies and standards., • Proven experience in highway infrastructure management or a similar role., • Strong understanding of Section 38 Agreements and the Highways Act 1980., • Ability to interpret and implement technical standards and regulations., • Excellent organisational and project management skills., • Strong communication and interpersonal skills, capable of managing multiple stakeholders., • Full driving licence and access to a vehicle for site visits.

PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester. This is a contract role although highly likely to be long-term. Rates: £27.54 per hour PAYE or £37 per hour Umbrella Monday - Friday 37 hours + The role will be responsible for Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level Specific responsibilities include: • Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations., • Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions., • Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level., • Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme., • Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements., • HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test., • A good understanding of measurement and test principles, and associated test equipment., • An understanding of the typical CADMID product lifecycle for test equipment is desirable., • An understanding of RF and microwave technology at subsystem level would be an advantage., • An understanding of Environmental testing (including ESS) would also be an advantage., • Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements., • Proven analytical and problem solving skills, with strong attention to detail., • The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives.

Project Engineer • Annual Salary: £35-£50 per day Umbrella, • Location: Bradley Fold Depot, • Job Type: Full-time Day-to-Day of the Role: • Lead the project management and delivery of the CRSTS Active Travel programme, focusing on infrastructure that supports cycling, walking, and other forms of active travel., • Design and implement on-highway and off-highway improvement and maintenance projects tailored to active travel., • Prepare outline and detailed design drawings, cost estimates, and contract documents specifically for active travel routes., • Develop procurement strategies to identify efficient and cost-effective delivery methodologies for active travel projects., • Supervise site construction works including compliance checks and preparation of payments, with a focus on active travel enhancements., • Manage the Council’s responsibilities related to Land Drainage and functions as Lead Local Flood Authority, ensuring these align with active travel objectives., • Evaluate and implement improvements to reduce flooding and provide recommendations on drainage matters in Planning and Building Regulations Applications, considering the impact on active travel., • Produce and manage contract documentation for infrastructure schemes, with a focus on active travel., • Ensure compliance with Safety, Health, Environment, and Quality policies, particularly in the context of active travel., • Relevant Level 7 qualification in civil/structural engineering., • Minimum of 10 years’ substantial experience in a relevant highways/asset/engineering role, with specific experience in active travel projects., • Chartership with a recognised organisation is desirable; membership is expected as a minimum., • Proven technical skills with a record of delivering outcomes, particularly in active travel projects., • Strong understanding of the financial, legal, and political workings of a local authority., • Excellent interpersonal skills with the ability to influence decision-makers and resolve conflicts., • Full understanding of health and safety, risk management, and business continuity applicable to design and construction processes, particularly the Construction Design and Management Regulations., • Significant project management experience and evidence of continual professional development, with a focus on active travel.

World Class Defence Organisation based in Bolton is currently looking to recruit 4x Manufacturing Engineers. Rate:£35.00 per hour Location: Bolton Contract:37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at time and a quarter Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Manufacturing Engineer Job Descript... ZIPC1_UKTJ

Test Equipment Design Support Engineer is required for a long term contract assignment based in Bolton\n\nElectronics rather than Mechanical experience required.\n\nSkillset/experience required:\n\nTo be suitable for this role, Individuals will be able to demonstrate a number of the following attributes:\n\nDegree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle.\nProven experience in the design of one or more of the following disciplines:-\nDigital and Analogue electronics\nPower Electronics\nRF & Antenna\nInterconnects\nSafety Electronics\nTest Systems\nSchematic design\nPCB Design\nAdherence to BS EN Standards \n\nResponsibilities\n\nYou will act as the interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. \n\nOverview of department:\n\nWe have a phenomenal opportunity for experienced Electronic Design Engineers to play a leading role in the support of production activities at our state of the art manufacturing facilities.\n\nWorking within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers.\n\nModis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. \n\nBoth Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. \n\nBy applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website

World Class Defence Organisation based in Bolton is currently looking to recruit a General Operative (Microelectronics) on an initial 12 month contract. This position will specifically require experience with strong soldering experience. Any prior microelectronics experience would be great, i.e. soldering under a microscope. You will also need experience working within a manufacturing environment. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Spec:The General Operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. • Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales., • Very good Soldering experience is required, • Any experience of soldering under a microscope or in a similar environment would be great, • Any Looming or PCB experience would be great, • Previous background of working in a Production Technician or Assembly Operative role would be great, • Contribute to the efficient movement of work and information in the manufacturing area., • Adhere in all activities to agreed standards and behaviours., • Comply with all health and safety requirements., • IPC 610 certified / trained preferred., • Dexterity for fine work. Read and interpret layouts. Follow instructions. Willing to work flexible shift patterns. Attention to detail. Work on own with minimal supervision. Flexible. ESD training. Desirable skills: PC literate. Colophony health surveillance.

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Test Operator / Electrical Test Engineer on an initial 12 month contract. Experience specifically required: • Apprenticeship essential, • Significant electrical test experience requiredContract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: £28.35ph and then after 12 weeks the rate is £29.70ph Electrical Test Operator Job Description:The Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific responsibilities include:, • Certify the product in line with Product Certification procedure., • Maintain product certification and approval via regular audits., • Possess a versatile skill base with the capability to apply these skills across a range of tasks., • Carry out setting-up procedures for testing, to include the awareness of the need for periodic recalibration of test equipment., • Carry out tests on electronic equipment in accordance with test instructions, using specified test equipment., • Carry out simple fault-finding procedures on electronic equipment., • Keep test records and reporting faults for rectification., • Ensure manufacturing test times are met., • Check and complete all paperwork associated with the manufacturing data pack., • Maintain to the highest level, workmanship standards and product quality., • Ensure compliance with all associated procedures applicable to the manufacturing process., • Maintain a safe working environment., • The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable., • Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21/ONC. Formal further education certificate to HNC or equivalent certificate. Manual handling training. Lifting & Slinging training (Including overhead cranes). ESD training.

World Class Defence Organisation is currently looking to recruit 2x Missile Test Architect subcontractors on an initial 6 month contract. Rate: £60.00 per hourLocation: Stevenage or Bolton (depending on your preference) Hybrid / Remote working: This role is a hybrid role, 1-2 days a week possibly in lab up to 3 in first weeksContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’Duration: 6 Months (initially and then ongoing and long-term thereafter)IR35 status: Inside IR35 (Umbrella)Missile Test Architect Job Description:The department are looking for experienced test equipment engineers that want to use their knowledge in a system/sub system management role. The role includes determining the project test equipment needs, managing the requirements for test equipment and managing the development through delivery and into service. In this role, you will be responsible for the projects test equipment and reporting into the Chief Design EngineerThe department is responsible for the test architecture of our missiles, specifying and analysing the missile built in test, specifying the production testing requirements and managing the specification and delivery of the missile test equipment.Responsibilities: • Responsible for defining and implementing the project test strategy, • Responsible for defining and implementing the project BIT architecture including coverage requirements, BIT timings and system level BIT routines., • Responsible for specifying the missile factory pass out testing used to ensure correct build of our product, supporting the manufacturing team with identifying the optimal test stages during production., • Responsible for specifying the in service test routines on our missiles., • Responsible for generating and managing compliance to the lower level test requirements placed upon design teams including test access needs, BIT coverage/timings and factory test functionality., • Responsible for analysing and modelling our system to understand the test coverage and generate diagnostic instructions., • Responsible for proposing and recommending, with the Chief Design Engineer, the cost vs test coverage trade-offs., • Responsible for producing and maintaining plans for activities within their sphere of responsibility.Skillset/experience required:Ideally educated to degree level with substantial experience of test, electrical or electronic engineering, ideally including at least one of the following:, • Digital electronics and microprocessor systems., • Analogue electronics., • Electronics testing., • Test equipment design.Good understanding of:, • Experience in requirements capture., • Project management and planning., • Stakeholder management.

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Technical Administrator subcontractor on an initial 12-month contract. This role could suit someone from a Project Coordinator, Project Assistant, Materials Controller, Engineering Coordinator or SAP Materials Coordinator background. Hourly Rate: £24.19phOvertime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a quarter. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter)Technical Administrator Job Description:We are seeking a technical admin to join the Calibration & Maintenance team at our Bolton site. The main focus of the role will be to manage all parts used in the calibration & maintenance of bespoke test systems on site. This will need to be managed in our SAP system. Working as part of a small Control Team within the wider Calibration & Maintenance department, you will produce and review technical reports for the management of spares and look at introducing better working practices on how we control them within SAP. You will be also working on producing service kits for regular maintenance that is performed on our manufacturing facilities.Key areas of responsibility are as follows: • Managing Spares., • From COTS (commercial off the shelf) down to components e.g. IC’s, connector savers & service kits., • Creation of calibration and service kits and there redeployment back in to our stock holding., • Creation of material masters with our SAP management system., • Working with engineers to ascertain min / max quantity levels., • Organisation of current stock and regular stock taking., • Ordering of new stock., • Using Jira to notify people of where items are up to., • Assisting the Control Team Lead in the management of critical spares., • Liaising with relevant Engineering function to determine their requirements, • Deploying critical spares packages and managing calibration requirements to minimise downtime to production., • Providing SAP training and producing documentation for calibration and maintenance specific activities for the control team.What we are looking for:, • Experience and knowledge of managing spares., • Working knowledge of the SAP (Systems Applications and Products in data processing) enterprise resource planning system., • Good analytical and problem solving skills., • Experience in creating and managing material masters and min / max levels., • Whilst not essential, a good understanding of calibration principles and processes would be beneficial., • The ability to deal with multiple issues, tasks and priorities concurrently.

Quantity Surveyor Bolton Competitive Salary Overview We are currently seeking an experienced Quantity Surveyor to join our clients growing commercial team supporting the successful delivery of complex engineering and construction projects. This role will see you manage the full commercial lifecycle of projects, from tender support through to final account settlement. You will play a key role in protecting commercial performance, managing contractual obligations, and maximising project value while ensuring quality and compliance standards are met. Working closely with Project Managers, subcontractors, and clients, you will be a vital part of ensuring projects are delivered on time, within budget, and in line with contractual requirements. This role offers an excellent opportunity for a commercially driven Quantity Surveyor to play a key role in delivering high-value projects while developing their career within a collaborative and forward-thinking environment. Key Responsibilities: • Manage all commercial aspects of projects from tender stage through to final account settlement, • Monitor project programmes to identify delays and ensure entitlement to time and contractual protections, • Administer contract variations and change control, ensuring timely notices and agreements with clients and subcontractors, • Maintain full contract documentation including payment applications, variations, notices, and quotations, • Prepare and submit interim applications for payment, • Analyse payment notices and monitor cash receipts, • Manage cost control, income, and expenditure across projects, • Support recovery of outstanding payments and resolution of financial exceptions, • Produce monthly commercial reports including: Cost Value Reconciliation (CVR), Cashflow forecasts, Cost-to-complete analysis, Work in Progress (WIP), Risk and opportunity registers and Earned value analysis, • Work closely with Project Managers to support the successful commercial delivery of projects, • Attend contract handover, progress, and review meetings, • Present commercial updates during monthly CVR meetings, • Develop strong relationships with clients, subcontractors, and internal stakeholders, • Subcontractor & Procurement Management, • Support the procurement and management of subcontractors, • Ensure subcontracts are correctly let and commercially controlled, • Manage subcontractor accounts including measurement cycles, certificates, and accruals, • Ensure compliance with contractual terms and legislative requirements, • Ensure commercial activities align with the overall commercial strategy, • Maintain accurate project records, WBS structures, and documentation, • Identify and escalate potential risks or issues early, • Minimum 5 years’ experience within a main contractor or project delivery environment, • HND or Degree in Quantity Surveying (or equivalent), • Strong commercial understanding of JCT, NEC, or IChemE contracts, • Experience managing subcontract procurement and commercial performance, • Proven experience with:, • Interim applications and payment processes, • Contract variations and claims, • Final account negotiation, • Strong understanding of earned value analysis and monthly commercial reporting, • Excellent numerical, analytical, and negotiation skills, • High level of organisation and time management, able to meet tight deadlines, • Proficient in Microsoft Office, • Membership of Royal Institution of Chartered Surveyors (RICS) or working towards chartership, • CSCS Card, • Strong ability to build productive relationships across stakeholder groups

Test Equipment Obsolescence Manager required for long term contract assignment in Bolton\n\nSkillset/experience required:\n\nEngineering Degree or relevant experience\nKnowledge and experience of managing Obsolescence\nKnowledge and experience of Electronic Equipment\nYou'll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs.\nManage discreet work packages preparing bids, controlling costs and delivering solutions.\nExcellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation.\nExperience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. \n\nstomers.\n\nResponsibilities:\n\nRole includes the following responsibilities:\n\nManaging Proactive and Reporting Services\nImplementing Strategy for Obsolescence Management\nTechnical Assessment working with Engineering teams to manage changes\nManaging Resources and Work load Planning \n\nModis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. \n\nBoth Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. \n\nBy applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website

World Class Defence Organisation based in Bolton is currently looking to recruit a Manufacturing Project Manager / Bid Lead subcontractor on an initial 12 month contract. The role will be a hybrid role of working from home and onsite (2 days per week).This role would suit a candidate who has bid manager / bid proposals experience along with a project manager experience. A defence / aerospace / manufacturing background would be great. Job Title: Manufacturing Project Manager / Bid LeadRate: £33 per hourLocation: BoltonHybrid / Remote working: 2 days per week onsiteContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’Duration: 12 Months (initially and then ongoing and long-term thereafter)IR35 status: Inside IR35 (Umbrella)Manufacturing Project Manager / Bid Lead Job Description: • Generation of Manufacturing Bids for Industrial Transfer packages of work, ensuring they are competitive, compliant and are in line with all business and commercial criteria., • Deliver Industrial Transfer projects or sub-projects, ensuring they are delivered to agreed time, budget and quality. Regularly reviewing and reporting on progress and, where necessary, intervening to resolve issues so that the project is delivered to plan. Ensuring accurate reporting of progress against all aspects of project performance and interpreting requirements back to manufacturing., • Lead the Manufacturing Offload Process, supporting Manufacturing Functions and project teams in the identification of Offload Opportunities. Working close with Procurement Functions (ISP-S and MEP) in the identification of suitable Offload suppliers. Generating Business Cases to support the Offload Opportunities and ensuring governance to the process is adhered to., • Lead the implementation of Manufacturing Industrial Policy / Strategy, ensuring it aligns with the New Business Pipelines and Technology Roadmaps., • Manage stakeholder interfaces including internal customers and ensure accurate reporting of progress against all aspects of project performance, • Support the New Business Team in the identification of new business opportunities and the development of approaches to winning the business., • Participate in developing, maintaining and modifying manufacturing processes and procedures in assigned areas in accordance with relevant standards, best practice and developing needs., • Collect, summarise and present information or data, carrying out pre-defined analyses and ensuring completeness and accuracy, and provide it to others for use in decision-making., • Actively participates in Functional & Strategic Change activities, support best practice & functional excellence., • Developing and maintaining key relationships with internal customers and key subcontractorsSkillset/experience required:, • Experienced Project Manager with a proven track record in the delivery of fixed cost programmes, of significant value, within a matrix organisation. Experience within an engineering or production environment would be of preference., • Experience at communicating at a high level, interfacing with key stakeholders in order to respond to complex situations and effectively influence the function and wider business., • Experience in the application of Project Management skills at assistant level in a relevant business environment, • Experience working on complex bids advantageous with a proven record of accomplishment in the generation of costed proposals/manufacturing bids. Experience within an engineering or production environment would be of preference., • Commercially astute as working with cost models to generate costings for direct/in directs, materials and other costs associated with manufacturing of products, • Strong presentation skills as the bid packs / cost brochures are generated using PowerPoint and presented to the Senior Management Team for approval, • Ability to articulate theory that has been applied to a costing approach and ensure evidence is collated for audit purposes, • Ensuring manufacturing is a key stakeholder in the generation of bid data throughout the Life Cycle of the Project/Product and adequately prepared to manage and deliver competitive and complaint bid proposals., • Ensure effective process governance in assigned areas ensuring projects adhere to all policies and procedures, promoting a culture of best practice sharing and knowledge exploitation, and contributing to relevant overall bidding activities, • Excellent communication skills, as the Bid Team work across all programmes, there are a lot of stakeholders and it is important to create own networks and build strong relationships experience of working within multi-functional teams, • Ability to work unsupervised and as part of a team, with a proactive approach, • Ability to articulate theory that has been applied to a costing approach and ensure evidence is collated for audit purposesPlanning & Scheduling:, • Developing detailed project plans, schedules, and milestones.Regulatory Compliance:, • Ensuring adherence to aerospace industry regulations and standards.Project Management Toolsets:, • SAP/Primavera P6

Electrical Fitter 12 month contract Based in Bolton Offering £28.35ph Inside IR35 Are you an experienced Electrical Fitter? Do you hold Electrical Engineering or similar trade certificates? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Fitter, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Certify the product in line with Product Certification procedure, • Certify own work in line with company quality standards, • Maintain product certification and approval via regular audits, • Be fully conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build, inspection, and where relevant test times are met, • Check and complete all paperwork associated with the manufacturing data pack, • Maintain workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process Trade Certificates: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Your skillset may include: • IPC 610 certified/ trained preferred, • Possess experience in electrical wiring and assembly, • Previous experience in the aerospace or defence industry would be desirable, • Manual handling training, • Lifting and slinging (including overhead cranes) training, • ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Position: Service Manager – Bury Outreach Location: Bury Salary: £36,500 Hours: 37 hours per week Contract Type: Permanent About Us Our purpose is clear: to make a real difference to people’s lives. Whether supporting individuals in recovery, helping communities thrive, or enabling employees to grow, we are committed to creating opportunities that transform lives. We embrace diversity in all its forms and take pride in employing a workforce that reflects the rich and varied communities we serve. Your skills and experiences could make all the difference – join us to be part of something meaningful. We are a well-established organisation working to reduce and eliminate domestic abuse, delivering support services to survivors across the Northwest of England. We provide a range of safe accommodation services for all survivors including women, children and young people, trans and non-binary individuals, and male survivors. Our offer includes 24/7 staffed safe refuges, second-stage move-on services, and individual dispersed safe house accommodation. We also deliver specialist support for those with additional needs, including dependency/addiction, mental and physical ill health, and other complex or multiple support needs. Alongside this, we provide community-based support such as outreach services, Independent Domestic Violence Advisor (IDVA) services, and healthy relationship programmes in schools. We understand the serious impact domestic abuse can have—especially on health and wellbeing—and provide support and guidance to help survivors live safely and securely. The Opportunity This is a rewarding opportunity for an experienced, values-driven Service Manager to lead and develop a trauma-responsive community service. You will play a key role in making a real difference to the lives of survivors of domestic abuse while shaping a high-quality, inclusive, and survivor-focused team. What We’re Looking For We are seeking a compassionate and skilled Service Manager with strong operational leadership experience. You will be committed to safeguarding and equality, with the ability to inspire teams to deliver high-quality, trauma-responsive services in the community. What’s in It for You? We value our people and offer a supportive, inclusive culture alongside a comprehensive benefits package: • Exclusive discounts at popular high street retailers and restaurants, • Health cash plan with access to a 24/7 doctor (for you and your dependents), • Access to mental health and wellbeing support services, • Cycle to Work Scheme, • Employer pension contributions, • Life assurance, • Financial advice services, • Employee recognition awards, • Ongoing learning and development opportunities, • Gym membership discounts, • Social and engagement events, • Paid professional fees, • Enhanced annual leave, sickness, maternity, and paternity benefits

Obsolescence Manager 6 month contract Based in Bolton Offering up to £60ph Inside IR35 Do you have experience in obsolescence/change management? Do you have experience with electronic/test equipment? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Onsolescence Manager, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain MOD security clearance. You will be involved in: • Managing Proactive and Reporting Services, • Implementing Strategy for Obsolescence Management, • Technical Assessment working with Engineering teams to manage changes, • Managing Resources and Work load Planning Your skillset may include: • Engineering Degree or relevant experience, • Knowledge and experience of managing Obsolescence, • Knowledge and experience of Electronic Equipment, • Manage discreet work packages preparing bids, controlling costs, and delivering solutions., • Experience of working within a multi-disciplinary team If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

About Us Teladoc Health is the world’s leading virtual care provider, delivering care to over 20 million members across 125 countries. Teladoc Health formally entered the UK virtual care space in 2019 offering the only comprehensive virtual care solution spanning telehealth GP services, mental health support, expert medical opinion, and nutrition consultations. We work with the world’s leading life, health, accident, travel and general insurers, other large corporates, affinity groups, and the NHS to deliver industry-leading, award-winning virtual healthcare services to their policy holders, employees, and patients. Position Summary We are looking for flexible, dependable support to join our team on an as-needed basis. This role is key to maintaining consistent service delivery during peak periods, staff leave, and unexpected absences. The ideal candidate will be adaptable, reliable, and able to step in at short notice to provide high-quality support. You will be confident integrating quickly into a team, managing fluctuating workloads, and contributing positively within a fast-paced environment to ensure continuity of operations when demand is high. Contract type: Self-employed contractor Salary: (depending on experience) Hours of work: Ad-hoc, to be agreed Location: Remote Main Responsibilities • Responding to a diverse range of customers nutritional needs via telephone and email, • Assessing the previous and current health profile of individuals evaluating food intake, exercise and lifestyle, • Offering educated advice aligned with current evidence, meal suggestions and lifestyle changes both verbally and via written consultation notes, • Contributing to blog posts and client webinars, • Using a safe, encrypted online service and bespoke consultation platform, • Adopting a customer first approach in everything that you do, • Maintain accurate, timely, and confidential clinical records and use digital health systems in line with organisational policies, • Work within defined scope of practice and refer appropriately when concerns fall outside nutritional care About You • Demonstrable experience delivering personalised, evidence-based nutritional advice that is both practical and patient-centred., • Proven ability to adapt to changing priorities and thrive within a fast-paced, dynamic team environment., • Previous experience in a healthcare setting is essential; familiarity with telehealth services or virtual care delivery is desirable., • Capable of working autonomously while also contributing effectively as part of a multidisciplinary team., • Excellent communication skills, both written and verbal, with the ability to engage patients clearly and professionally in a remote setting., • Strong attention to detail, with excellent organisational skills, punctuality, and a compassionate, empathetic approach to patient care., • Proactive and self-motivated, with a willingness to take initiative and manage workload effectively., • High level of IT literacy, including experience with digital healthcare systems and online communication tools. Essential Requirements • Qualified Nutritionist (to degree level), • Proven experience of providing nutrition support, • Current active registration with an independent professional body such as AfN, • Right to work in the UK Desirable Requirements • Experience working in telehealth or digital health services, • Experience supporting long‑term conditions, weight management, or metabolic health, • Training in motivational interviewing or health coaching, • Experience working alongside multidisciplinary teams Benefits of Partnering with Teladoc Health • Autonomy & Flexibility: Remote-first engagement with clear, outcome-focused scopes of work., • Clinical Collaboration: Join a multidisciplinary network of experts in a modern, digital health environment., • Values-Driven Culture: Work within an organisation built on Compassion, Accountability, Respect, and Excellence., • Knowledge Exchange: Optional access to specialist forums, learning showcases, and innovation insights., • Sustainable Engagement: A pragmatic, flexible approach to workload, combined with clear expectations around supporting service needs., • Inclusive Community: Optional invitations to social events and wellbeing resources -connection without the obligation. Equality and Diversity Teladoc Health UK adopts a zero-tolerance approach to discrimination on any of the protected grounds in the Equality Act 2010. We are committed to providing equal opportunities to all current and prospective employees regardless of age, disability, sex, sexual orientation, pregnancy and maternity, race or ethnicity, religion or belief, gender identity, or marriage and civil partnership. We aspire to have a diverse workforce because, in our view, diversity enables better business outcomes. We also believe that a more inclusive workplace, where people of different backgrounds work together, ensures better outcomes for all staff. From application to interview, we place inclusion at the heart of all we do. We strongly encourage suitably qualified applicants from a wide range of backgrounds to apply and join Teladoc Health UK.

Manufacturing Engineer 12 Month Contract Based in Bolton Offering circa £35ph Inside IR35 Eligible for SC clearance Are you an experienced Manufacturing Engineer? Do hold a Level 3 Apprenticeship or BEng? Are you well experienced with SAP? Are you looking to work with an industry-leading company? If your answers are yes to these, then this could be the role for! As the Manufacturing Engineer, you will be working alongside a market-leading defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved with the assembly manufacturing facility with a key focus to ensure that the products are built efficiently. to this end, you will be carrying out activities including: • Compilation and update of Manufacturing Instructions., • Design, Commissioning, and proving of associated tooling., • Support the industrial validation process through the use of FMEA’s, FAI’s etc., • Resolution of technical problems that may arise during the manufacturing process., • Route card changes as a result or rework activities., • Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions., • BEng in relevant Engineering Degree, • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators., • Have experience in Electronic subassembly manufacture through to System level builds., • Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems., • Must be able to work within, and contribute to a team environment., • Recognise and understand customer requirements, and respond to them., • Understand and work with Company Processes and Procedures., • Have the ability to communicate both within the working group and at various levels of the organisation., • Manual handling training., • ESD training. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Are you an experienced Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Providing test engineering support to operators on the shopfloor, • Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level, • Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information, • Identify remedial and corrective actions, • Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: • A good understanding of measurement and test principles, and associated equipment down to component level, • Awareness of electrical/electronic sub-system and system design, integration, and test principles., • An understanding of RF and microwave technology at subsystem level, • An understanding of Environmental testing (including ESS), • Manual handling training, • ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Summary £15.45 - £15.95 per hour | 35 hour contract | 30-35 days holiday (pro rata) | 10% in-store discount | Enhanced family leave Everyone who works at Lidl brings something unique to the table - but we also have a whole lot in common. We're reliable, organised and ready to go far. Just like you. As a Retail Shift Manager at Lidl, you'll help us maintain our high standards day after day. From motivating your team to taking responsibility for the shop floor, you'll keep our store running like clockwork, thriving in a fast-paced and challenging environment. You'll also reap the rewards of your hard work, enjoying the responsibility to prove yourself as a leader and find your footing for future success. In return, we'll give you a competitive hourly pay rate based on equal opportunity and pay structures, plus an extra £2.00 per hour for work during bank holidays and £3.50 per hour for night shifts, as well as a generous benefits package designed to support your well-being and life outside of Lidl. We're proud to be supportive teams with big ambitions too, so there'll be plenty of ways for you to progress. With the right training, we'll help you thrive in your role and champion you to succeed in your career here. What you'll do • Motivate and support your team, learning from our Leadership and Company Principles, • Swiftly solve problems and delegate tasks, • Create an environment where your colleagues can succeed alongside you, • Manage operations within your Store and colleagues in the absence of the Store Manager and Deputy Store Manager, • Handle freshness, cash processes, inventory and stock management to make sure shifts run smoothly, • Experience leading a team to achieve targets in a bustling, fast-paced environment, • The ability to effectively delegate tasks and motivate your team, • Patience and a friendly manner with the ability to keep calm in any situation, • Passion to thrive as a key part of the Store Team, • 30-35 days holiday (pro rata), • 10% in-store discount, • Enhanced family leave, • Pension scheme, • Long service awards We value diversity, equity, and inclusion, welcoming applicants from all backgrounds. Join us to celebrate individuality and grow in a fair, respectful, and inclusive environment. If you're ready to get stuck in, want to get more out of your career and make a real difference, find your place at Lidl and apply now. Please note your employment is conditional upon the Company's receipt of satisfactory references and if requested by the Company, a satisfactory Disclosure and Barring Service check.

Who are we? At Cranswick Continental as explorers of great taste, we pride ourselves on delivering delicious, authentic tastes. Headed by Italian-born food expert Vaz Frigerio our sourcing team scours the continent and further afield in search of great food and great food producers. Over the years, our culinary adventures have allowed us to build partnerships with specialist producers; from Emilia-Romagna’s finest meat curers to Andalucia’s most sustainable olive growers. From our state of the art site in Bury we bring together these wonderful continental foods and pack them in an efficient, sustainable and relevant format for the UK consumer to enjoy. Job Purpose: The Projects Engineer is responsible for planning, coordinating, and delivering engineering projects from concept through to completion. This role ensures that projects are executed safely, on time, within budget, and to the required quality standards. Working closely with cross-functional teams, the Projects Engineer acts as the technical and organisational bridge between design, operations, and stakeholders, driving efficient project delivery while managing risks and resolving challenges. Responsibilities: -Plan, manage, and execute engineering projects across their full lifecycle -Develop project scopes, schedules, budgets, and resource plans -Coordinate with internal teams, contractors, and external stakeholders -Monitor project progress and performance against agreed targets -Identify, assess, and mitigate project risks and issues -Ensure compliance with relevant engineering standards, regulations, and safety requirements -Review and approve technical designs, specifications, and documentation -Manage procurement activities, including supplier selection and contract oversight -Lead project meetings and provide clear progress reporting to stakeholders -Implement continuous improvement initiatives to enhance project delivery processes -Support commissioning, testing, and handover activities -Maintain accurate project records and documentation -Provide technical guidance and support to engineers and team members Qualifications • Degree or equivalent qualification in Engineering (e.g. Mechanical, Electrical, Civil, Manufacturing, or similar), • Formal project management training or certification (e.g. PRINCE2, APM PMQ, PMP or equivalent), • Chartered Engineer (CEng) or working towards chartership, • NEBOSH, IOSH, or equivalent health and safety qualification We are an equal opportunities employer. At Cranswick we know that diverse teams are more likely to have greater innovation, creativity and understand of our customer needs. These are many of the things we are passionate about. Did you know that some demographics may be less likely to apply to job adverts than others? For example, women are likely to apply only if they fit all of the skills listed. If you’re reading this and perhaps don’t tick every skill, then please still make yourself known to Cranswick. We’d love to hear from you so we can assess this. We also want to ensure that individuals with disabilities are provided reasonable accommodation to participate in the interview process, therefore please contact us to request assistance.

World Class Defence Organisation based in Bolton is currently looking to recruit a Night Shift General Maintenance Operator on initial 12 month contract and then ongoing and long-term thereafter. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate:Hourly Rate: £39.50ph Night Shift General Maintenance Operator Job Description:We are looking for a reliable and proactive General Maintenance Operator to join our team and support the Calibration and Maintenance department in ensuring the facility and equipment remain safe, compliant, and operational.Responsibilities include: • Support the Calibration & Maintenance department with general maintenance activities across the facility. • Carry out routine facility compliance activities including: ESD (Electrostatic Discharge) testing throughout the facility Electrical Safety Testing of equipment and portable appliances LEV (Local Exhaust Ventilation) filter changes and associated maintenance tasks • Assist with planned preventative maintenance activities and respond to general maintenance requirements as needed. • Maintain accurate records and ensure all documentation and paperwork are completed correctly and on time.Development & Progression: This role offers opportunities for progression within the Calibration & Maintenance department. Training and development will be provided to support the successful candidate in developing skills and experience in: • Mechanical calibration • Electrical calibration • Use of test equipmentSkills and Experience: • Previous maintenance experience is desirable but not essential • Ability to follow procedures and complete documentation accurately • Good communication skills and the ability to work as part of a team • Positive attitude with a willingness to learn new skills and develop technically

KS3/4 ENGLISH TEACHER APRIL 2026 STARTProspero Teaching are looking for a English teacher for a long term role, starting April 2026. You will be responsible for teaching English, both to KS3 and KS4. This position is a long-term role. The position is open to NQT's/ECT's and more experienced colleagues. You will be paid to scale from day one of this assignment and we are available to discuss this role with teaching professionals as soon as possible. Our school is set in stunning countryside and is easily accessible by road (M61, A666) and has excellent bus and train links. This role is ideal for colleagues based anywhere in Lancashire and we have worked with this school since 2007. CONTRACT/POSITION DETAILSLocation Bolton, Lancashire Position Teacher of English Type of work - Long term supply Start date - April 2026 Duration / Likely Duration July 2026, potentially December 2026 End date (if applicable) N/A Contract type - Temporary / potentially temporary to permanent Full time/part time Full Minimum rate of pay GBP163/day up to GBP233/day Hours 8:30 am 3.30pm (including parents evenings, meetings, and duties in line with a teacher etc) EXPERIENCE, TRAINING AND QUALIFICATIONSEnglish Graduate, with a 2:2 or higher UK Qualified Teacher Status is essential for this role Previous experience working in a UK school Up to date Safeguarding training issued in the last year TO BE ELIGIBLE FOR THIS ROLE THROUGH PROSPERO TEACHING, YOU MUST:Hold Right to Work in the UK Hold an enhanced child barred list DBS certificate registered with the online update service or be willing to process a new application Provide two professional child related references If you would like to be considered for this role, please apply with a copy of your up to date CV. Unfortunately, only shortlisted candidates will be contacted. Prospero Teaching is acting as an employment business/education recruitment agency in relation to this vacancy. The successful candidate will be required to register and have passed all safeguarding/vetting checks with Prospero Teaching in order to fill this vacancy. Any adult working with children and vulnerable young people are responsible for safeguarding and protecting the welfare of the children and young people. Prospero Teaching is able to offer the successful candidate: Free, accredited continued professional development courses including safeguarding and behaviour management In-house Training and Development Team

EYFS Teacher - September 2026 Start Central Bolton Primary SchoolVia Tradewind Recruitment1-Year Fixed-Term Contract (with strong potential to become permanent) Tradewind Recruitment are delighted to be working with a welcoming and inclusive primary school in Central Bolton, who are seeking to appoint an enthusiastic and dedicated EYFS Teacher to join their team from September 2026. This is a full-time, one-year fixed-term opportunity with a strong likelihood of becoming a permanent position for the right candidate. The successful applicant will be passionate about early years education and committed to creating a nurturing, engaging and stimulating learning environment where children can flourish both academically and personally. The Role: • Full-time EYFS Teacher, • September 2026 start, • Based in a supportive primary school in Central Bolton, • Planning, preparation and assessment responsibilities included, • Excellent support from senior leadership and wider staff team, • Opportunity to secure a permanent roleThe Successful Candidate Will:, • Hold Qualified Teacher Status (QTS), • Have strong knowledge of the EYFS curriculum, • Demonstrate excellent classroom practice, • Be committed to raising standards and outcomes for all pupils, • Have strong behaviour management and communication skills, • Paid to scale point, • Access to ongoing CPD and training, • Dedicated consultant support throughout your placement

Supply Teaching Assistant - Bury Start Date: ImmediateHours: Varied (typically 8:30 AM - 3:30 PM)Contract Type: Flexible supply Veritas Education is looking for experienced Teaching Assistants to join our supply team, supporting primary schools across Bury. This is a flexible role ideal for those who enjoy variety and want to gain experience in different school settings. Applicants must have: • A Level 2 Teaching Assistant qualification, • At least 6 months of classroom experience, • Confidence working across EYFS, KS1, and KS2 APPLICATION REQUIREMENTS FOR VERITAS EDUCATION • All applications are subject to an Enhanced DBS Disclosure, professional reference checks, Overseas Police Clearances (if applicable) in line with our stringent safeguarding policy, • Your CV must cover the last 10 years of employment history where possible and all employment breaks must be explained, • You must have legal right to work in the UK Disclaimer 'Nothing within the above advert was in any way designed or intended to discriminate on the grounds of age, gender, race, colour, religion, disability or sexual orientation. Veritas Education is an Equal opportunities employer and is proud in the knowledge that all placements are made on merit and suitability. We accept applications from all sections of the community.'