Offres documentation à Westhoughton - Page 5Créer des alertes d'emploi

Goods Inwards / Incoming Quality Inspector (Stores & Manufacturing) Bolton | Onsite | Defence Manufacturing Why apply? An opportunity supporting a major UK defence programme Clearly defined role focused on goods inwards & stores inspection (not bench/final inspection) ________________________________________ The opportunity As a trusted partner to the UK Ministry of Defence, our client is seeking an experienced Goods Inwards / Incoming Quality Inspector to join their established manufacturing site in Bolton. This role is critical to ensuring all incoming materials and components meet purchase order, contractual, and quality requirements before entering production. You will play a key part in protecting compliance, supporting manufacturing schedules, and maintaining the highest standards within a safety critical, regulated environment. ________________________________________ What youll be doing Inspect and verify all incoming goods against purchase orders, delivery notes, and quality documentation Formally accept procured products in line with approved standards and contractual conditions Read and interpret engineering and assembly drawings, including dimensional tolerances and machined features Inspect components for damage, surface finish, paint defects, and first off requirements where applicable Complete, maintain, and update accurate inspection and quality records, ensuring full traceability Validate delivery paperwork and system entries to support audit and compliance requirements Meet agreed inspection turnaround times to support manufacturing demand Identify, segregate, and control non conforming material, raising and maintaining NCRs as required Support product verification and approval activities, including audits and PCB inspection where applicable Maintain compliance with manufacturing, quality, and safety procedures while contributing to a safe, organised working environment ________________________________________ What were looking for Essential experience Proven goods inwards, incoming inspection, or stores inspection experience within a manufacturing or regulated environment Strong understanding of inspection requirements for safety critical components Experience managing receipt, verification, traceability, and non conformance control Confidence working with inspection documentation, delivery paperwork, and quality records Please note: This role requires goods inwards / stores inspection experience. Final or bench mechanical inspection experience alone is not suitable. Qualifications (one of the following) Level 3 Electrical/Mechanical Engineering or Manufacturing Apprenticeship, or Level 3 Electrical/Mechanical Engineering or Manufacturing qualification (e.g. NVQ, ONC, Diploma or equivalent). Qualifications must meet the required standard for the role. Additional skills Manual handling and ESD awareness SAP experience is desirable but not essential ________________________________________ Security clearance British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. ________________________________________ About the site The Bolton facility is one of the North Wests leading manufacturing sites, supporting defence programmes for over 25 years. The site offers: Onsite canteen Free parking, showers, and bike racks Convenient motorway access ________________________________________ What happens next? Once you apply, and if your application meets the selection criteria, a member of the talent acquisition team will contact you to arrange a structured screening call. This conversation will explore your experience and suitability for the role in more detail. TPBN1_UKTJ

This is a fantastic opportunity for an experienced Test Equipment Design Engineer to join our Production Design Support Team. You will play a key role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Salary: Up to £49,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Test Equipment Design Engineer to play a key role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as a Focal Project Lead between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of Electronics. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can also help to shape the design of the products and test equipment, delivering support to our customers What we're looking for from you: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Someone who has a record of accomplishment of on-time delivery Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring. Someone with a passion for innovation and collaboration. Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions.Proven design experience in one or all of the following disciplines:- Digital & Analogue Electronics Power Electronics RF and Antenna Design Interconnects Safety Electronics RF Test and measurement principle knowledge Test SystemsOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Murphy is recruiting for a Bid Administrator to work with the Work Winning team across all Energy projects. Operating in the United Kingdom, Ireland, Canada and the USA, Murphy provides better engineered solutions to infrastructure sectors including transportation, water, power and natural resources. So that our teams out on projects can run smoothly it is vital that we have robust support functions in place. We are committed to fostering an engaging and collaborative work environment in which each person’s career is nurtured and developed. We focus on employee development, providing a culture of innovation and positive work-life balance. The Murphy Bid Administrator provides high-level administrative support to the Bid Management team, ensuring the timely and accurate submission of Pre-Qualification Questionnaires (PQQs) and Tender proposals. You will be a central point of contact, coordinating various stakeholders to meet strict deadlines and maintain the quality standards of "One Murphy". A day in the life of a Murphy Bid Administrator Documentation Management: Assist in the compilation and production of PQQ documents and Tender deliverables. Portal Coordination: Manage company accounts within client portals to download tender documentation and upload final submissions. Communication: Act as a point of contact for internal teams (Operations, Health & Safety, Commercial) and manage all client dialogue and clarification logs. Record Keeping: Maintain accurate digital and paper-based filing systems and update CRM and PowerBI entries for pipeline tracking. Governance Support: Collect all the latest governance (authority) sign-off documents from Bid Managers and Estimators, and process via Docusign. Content Support: Liaise with construction teams to collate case studies and update the submissions library with model answers. Reporting: Assist with the collation of management reporting information and related indirect financial duties, such as tracking bid costs or processing invoices. CV Coordination: Engage with SMEs by arranging calls to gather accurate, up-to-date, and relevant information for individual CVs. Document Assurance: Ensure correct version control and availability of all relevant materials for each opportunity. Administrative support: effective diary coordination, recording meeting notes and organisation of bid-related activities if required. Still interested does this sound like you? Skills: High proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint, Visio). Teams, SharePoint and Adobe Acrobat aptitude desirable. Experience: Previous experience in an administrative “pre-contract” support role is preferred but not essential, ideally within the construction or engineering industry. Attributes: Exceptional attention to detail, the ability to multi-task under pressure, and strong organizational skills. Values: A commitment to the Murphy "Zero Harm" culture and a proactive, collaborative approach to work

Mechanical Inspector 12 Month Contract Based in Bolton Offering £28.35ph Inside IR35 Are you an experienced Mechanical Inspector? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Mechanical Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! You will be involved in: Certify the product in line with the product certification procedure Examining for correct assembly Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc... Inspect for physical damage Inspection checks non-product certification Monitor product certification operators Check and complete all paperwork associated with the manufacturing data pack Control defect items via segregation from good product Raise and maintain relevant data records/defect reports Produce relevant inspection/quality control documentation/history sheets Care for and use specialised inspection tools Maintain product certification and approval via regular audits Ensure compliance with all associated procedures applicable to the manufacturing process Ensure inspection times are met Your skillset may include: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21or HNC Several years' experience as a skilled person IPC 610 certified / trained preferred If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Mechanical Inspector 12 Month Contract Based in Bolton Offering £28.35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Registered General Nurse (RGN) Join Nurseplus as a Registered General Nurse – Deliver Exceptional Care Every Day At Nurseplus, we’re more than just a care agency — we’re a community dedicated to excellence in healthcare. As a temporary Registered General Nurse, you’ll provide compassionate, expert care to clients across diverse healthcare settings. With flexible working options, competitive pay, and industry-leading support, you can build a career that works for you. Why Choose Nurseplus? Flexible Work, Your Way: Take control of your schedule with our Workwise app. Choose part-time or full-time hours, days, nights, or weekends to fit your lifestyle. Weekly Pay & Competitive Rates: Earn between £22.41 to £41.47 per hour paid weekly, depending on shift pattern (higher rates apply for nights, weekends, and bank holidays). Make a Real Impact: Provide essential care to a wide range of clients, from administering medications and managing complex care plans to supporting recovery and promoting independence. Free Industry-Leading Training: Access professional development opportunities, including free revalidation support, to enhance your skills and career. Revalidation Support: Benefit from comprehensive internal resources to maintain your NMC registration. · Blue Light Card: Enjoy thousands of high-street and online discounts with eligibility for a Blue Light Card. What You’ll Do As an RGN with Nurseplus, your role will be as rewarding as it is varied. Key responsibilities include: Delivering high-quality nursing care to patients in line with individual care plans. Administering medications and treatments in accordance with NMC guidelines. Monitoring and assessing patient conditions, responding promptly to changes in their needs. Supporting clients with chronic conditions, post-operative care, or rehabilitation programs. Collaborating with multidisciplinary teams to provide holistic, patient-centered care. Ensuring accurate documentation and maintaining care records to the highest standards. What We Need From You A current and unrestricted NMC registration. At least six months of UK-based paid experience. The right to work in the UK. A good standard of English and effective communication skills. Flexibility to travel as required. About Nurseplus At Nurseplus, our mission is to make a positive impact and change lives every day. We are passionate about delivering the highest-quality care that truly makes a difference in the lives of those we support. But our commitment doesn’t stop there – we care just as much for our staff as we do for our clients. By fostering a supportive and inclusive environment, we empower our team to grow, thrive, and make a meaningful contribution to the communities they serve

This is a fantastic opportunity for an experienced Test Development Engineer, specialising in circuit card electronic test, to join our Test Development team. It is an exciting time as we begin work on a host of challenging, but rewarding projects, from concept design through to series production and full in-service support! Salary: Circa £ 43,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This is a fantastic opportunity for an experienced Test Development Engineer, specialising in Circuit Card electronic test, to join our Test Development team at our Bolton site. Working in an established team as a Test Development Engineer you'll be creating and maintaining small to medium-sized automated test systems. You'll be responsible for the development and implementation of test strategies and, where appropriate, influencing our product through 'Design for Test'. This involves creating test strategy documents, designing Interchangeable Test Adaptors (including both mechanical and electrical elements) and software development of automated test sequences in accordance with a test specification. You'll also have the opportunity to get involved with continuous improvement activities and the development of new technologies What we're looking for from you: Sound understanding of fundamental analogue and digital circuit design. Experience of creating and using technical documentation and Drawings i.e. Schematics, PCB layouts, Engineering Drawings. Significant experience creating Automated Test Equipment. Experience of using NI LabVIEW and/or TestStand preferable. Experience in Boundary Scan / XJTAG preferable. Strong problem solving skills with an exceptional eye for detail. Strong analytical skills and passion for driving continuous improvement, with six sigma experience desirable.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Lead Verification & Validation Engineer Advanced Technology | Defence Systems Salary: Up to £57,000 (DOE) Working pattern: typically 2–3 days on site Security: British citizen or dual UK national (clearance required) The Opportunity We’re partnering with a leading UK defence technology organisation working at the cutting edge of advanced weapon systems. They’re looking for a Lead Verification & Validation Engineer to play a key role in assuring the performance, safety and compliance of a complex, high-profile system. This is a great opportunity for an engineer who enjoys ownership, coordination and influence, rather than deep hands-on design. You’ll sit at the centre of a multidisciplinary engineering team, helping to ensure that what’s been built meets requirements, standards and real-world expectations. What You’ll Be Doing Leading verification and validation activities across physical and environmental aspects of a complex system Coordinating internal teams and external suppliers to deliver certification and compliance evidence Assessing design changes and their impact on performance, safety and compliance Managing verification plans, tracking issues, and supporting resolution through collaboration Supporting key engineering reviews and milestones Contributing to regulatory, certification and customer-facing documentation This role is about assurance, coordination and technical leadership, rather than detailed design work. What We’re Looking For Background in systems, hardware, or engineering assurance roles Understanding of verification, validation, or certification processes Experience working with requirements, test evidence or compliance activities Confident communicator who can engage engineers, suppliers and stakeholders Comfortable working across disciplines (systems, mechanical, electrical, software) If you’ve worked in regulated or safety-critical environments (defence, aerospace, automotive, rail, energy, etc.), that’s a strong plus. What’s On Offer Bonus up to £2,500 (performance-based) Pension contributions up to 14% Paid overtime opportunities Up to 15 additional flexi-leave days Flexible and hybrid working arrangements Enhanced parental and family leave Excellent on-site facilities and subsidised meals Healthcare cash plan covering everyday wellbeing costs

The Role: Multi Skilled Maintenance Engineer (CNC Maintenance) As a Multi Skilled Maintenance Engineer, you will be responsible for maintaining, repairing, and troubleshooting a wide range of CNC machine tools and production equipment to minimise downtime and support continuous improvement. Key Responsibilities: * Repair and maintain CNC machinery, machining centres, and manual machine tools * Fault finding and diagnostics on electrical, mechanical, hydraulic, pneumatic, electronic and software systems * Install, service and maintain machine tool equipment and control systems * Carry out planned preventative maintenance (PPM) and reactive maintenance * Complete full condition appraisals on CNC machinery * Identify, source and replace faulty components * Test, adjust and commission repaired equipment * Assist with machine moves and production layout changes * Escalate production-critical breakdowns to minimise downtime * Use technical manuals, schematics and OEM documentation to resolve complex issues Skills & Experience Required: * Minimum 4–5 years’ experience in CNC machinery maintenance within a manufacturing or engineering environment * Time served engineer – NVQ Level 3 Apprenticeship * Strong electrical fault-finding and diagnostic skills * Strong mechanical maintenance experience * Experience working with, Multi-axis CNC lathes, Horizontal and vertical milling machines and Machining centres * Ability to read and interpret drawings * Experience with Fanuc controls (advantageous) Working Hours: * Monday – Thursday: 6:45am – 3:15pm * Friday: 6:45am – 2:15pm * Day shift role Salary: Competitive salary / hourly rate – dependent on experience. Why Apply? * Stable, long-term permanent opportunity * Strong engineering team environment * Opportunity to work on advanced CNC and precision engineering equipment * Excellent company reputation within the manufacturing sector How to Apply: To apply for this Multi Skilled Maintenance Engineer position, please submit your CV in Word format

Goods Inwards Inspector 12 month contract Based in Bolton Offering £28.35ph Inside IR35 Do you have goods in inspection experience? Do you have experience with SAP? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Goods Inwards Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Ensuring that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Verify and accept procured products in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regard to dimensional tolerances and machining. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first-off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspection times are met. Control defect items via segregation from good products. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCB Ensure compliance with all associated procedures applicable to the manufacturing process. Your Skillset may include: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. SAP literate If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Goods Inwards Inspector 12 month contract Based in Bolton Offering £28.35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Murphy is recruiting for a [[title]] to work with Energy on the Norwich to Tilbury scheme, as part of our delivery of the Great Grid partnership (GGP) Based at Wigan - WA3 3JD and 3 days at site at Bury St Edmunds. Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Senior Quantity Surveyor Ensure the site team adheres to group procedures and governance Management of internal commercial reporting and any other reports which may be required Preparation of Valuations/Applications for Payment with full supporting documentation in accordance with the contract Oversee Cost Reports to the Client with contractually compliant supporting documentation Management of subcontract and material procurement schedules Administration of subcontractor/supplier accounts from the preparation of detailed requisitions, monitoring and authorisation of subcontract payments through to agreement of final accounts Undertake the contract administration, including change management and maintain associated registers Identifying commercial risks, opportunities, value engineering and change Use the cost allocation/coding which satisfies both internal and external requirements Measurement of quantities in accordance with the standard methods of measurement as required Still interested, does this sound like you? HND/Degree qualification Proven experience as a Senior Quantity Surveyor or a times served Quantity Surveyor looking to step up. Solid knowledge across NEC Contracts. Registered with RICS / ICES and working towards chartership. Experience on Civil Engineering and/or Major Construction Projects

Murphy is recruiting for a Quantity Surveyor to work with the Energy team, initially based at Stonecross ( WA3 3JD) Jan- June, then onsite 5 days a week at Glaslyn on the Great Grid Upgrade, to reinforce and refurbish parts of the high power network in North Wales. Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Quantity Surveyor Aid in the internal commercial reporting and any other reports which may be required. Prepare Valuations/Applications for Payment with full documentation in accordance with the contract Control of Cost Reports to the Client with contractually compliant documentation Preparation and management of subcontract and material procurement schedules Administration of subcontractor/supplier accounts from the preparation of detailed requisitions, monitoring, and authorisation of subcontract payments through to agreement of final accounts Undertake the contract administration, including change management and maintain associated registers. Identifying commercial risks, opportunities, value engineering and change Use the cost allocation/coding which satisfies both internal and external requirements. Measurement of quantities in accordance with the standard methods of measurement as required. Assist in the preparation of project final accounts. Drafting of subcontracts including professional services. Still interested, does this sound like you? HND/Degree qualification Proven experience within a Commercial role i.e., Assistant Quantity Surveyor, Quantity Surveyor, or a similar role. Registered with RICS / ICES and working towards chartership. Knowledge of Standard Forms of Contract, NEC preferable together with Standard Methods of Measurement

Payroll & HR Systems Manager Hybrid Working | Competitive Salary + Benefits A Pivotal Opportunity to Shape Payroll & People Systems This is an exciting opportunity to join a growing UK business that forms part of a successful international group. With a strong presence across the foodservice, hospitality and retail sectors, the organisation combines global capability with local expertise and is committed to operational excellence, innovation and continuous improvement. The business is currently implementing a new HR and payroll system, making this a key moment to join. The Payroll & HR Systems Manager will play a central role in embedding the new system, optimising processes, strengthening reporting capability and ensuring a smooth transition across the organisation. This is a genuine opportunity to shape how payroll and people systems operate for the future. The Role We are seeking an experienced Payroll & HR Systems Manager to take ownership of end-to-end UK payroll operations while leading the optimisation and development of payroll and HR systems. This is a high-impact role responsible for ensuring payroll is delivered accurately, compliantly and efficiently, while driving system improvements and strengthening cross-functional processes across HR, Finance and IT. Key Responsibilities Lead the accurate and timely delivery of monthly UK payroll Ensure full compliance with HMRC regulations, PAYE, NI, statutory payments and pension auto-enrolment Manage year-end processes including P60s, P11Ds and reconciliations Oversee payroll and HR systems, ensuring data integrity and optimal performance Drive system improvements, upgrades and integrations Partner with Finance, HR and IT teams to ensure seamless data flow and reporting Provide payroll reporting, analytics and insights to senior leadership Act as the key point of contact for payroll queries and external providers Maintain robust controls, documentation and audit readiness About You You are a detail-oriented payroll professional with strong systems expertise and a proactive, solutions-focused mindset. You will bring: Proven experience managing end-to-end UK payroll Strong knowledge of UK payroll legislation and compliance requirements Experience managing payroll and/or HR systems (system implementation experience highly desirable) Advanced Excel capability Strong analytical skills and exceptional attention to detail Experience leading system improvements or implementations Excellent stakeholder management skills CIPP qualification (desirable) Experience within a multi-site or international organisation (advantageous) What's on Offer Competitive salary and benefits package Hybrid working options Opportunity to shape payroll and HR systems during a major implementation Collaborative, supportive and forward-thinking environment The stability and backing of a global group with a strong UK footprint TPBN1_UKTJ

Machine Minder & Mixing Operative Opportunities - Food Manufacturing Location: Bolton, BL3 4DU Pay: £12.74-£14.01/hr (+ Overtime at £15.92/hr) Shifts: Monday-Friday (06:00-14:00 / 14:00-22:00 / 22:00-06:00) GI Group is recruiting for one of Bolton's leading food manufacturing Client! Due to expansion, there are immediate openings for Machine Minders and Cream Room/Bakery Mixing Operatives. Successful candidates will have the opportunity to secure a permanent contract. Key Responsibilities: Operate and set up production line machinery, ensuring consistent and high-quality output. Support the mixing crew by combining raw materials per formula specifications and maintaining batch documentation. Organise and maintain a sanitary work area. Adapt to various duties as needed by production management.Desirable Skills: Comfortable working with minimum supervision. Good communication and basic maths skills. Physically able to handle repetitive tasks and move items up to 50 pounds. Flexible, team-oriented approach.Ready to join a fast-growing team in a dynamic environment? Apply today with GI Group and advance your career in food manufacturing! Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Silver status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Job Title: Quality Controller Reports To: Quality Manager Location: Bolton Overview: We are currently recruiting for an experienced Quality Controller (QC) to work for our client at their facility In Bolton. The role is heavily involved in ensuring products and services meet defined quality standards and functional requirements. This is an exciting role responsible for delivering and adhering to company quality processes, documentation, and inspection standards across all business activities. Key Performance Indicators (KPIs) Non-conformance reports (NCRs) for shortages or defective goods received from clients. NCRs for non-conforming outsourced components. On-Time, In-Full (OTIF) delivery performance. Customer feedback and satisfaction. Timely resolution of customer issues. Responsibilities & Duties: Execute quality processes and procedures; report quality variances to the Quality Manager. Collaborate to ensure inspection methods and quality processes are fit for purpose. Contribute to continuous improvement initiatives and lessons learned reviews. Monitor and control calibrated items and verification tools. Ensure all inspected components are traceable to purchase orders or project numbers. Verify incoming goods (including kits) meet specifications and documentation requirements; reject defective items in a timely manner. Confirm certifications (Mill Certificates, Certificates of Conformity) are correct and traceable. Conduct supplier and vendor inspections as required. Identify, document, and report defects, deviations, and non-conformities. Conduct dimensional, visual, and functional inspections using equipment such as CMM arms, micrometers, and verniers. Maintain accurate quality records using defined systems (e.g., MRP, MyCompliance) or written formats. Inspect kits/components prior to issue and record anomalies. Assist in developing Quality Control inspection plans and routings. Perform inspections on internally produced components, including stock items, laser-cut plates, and pressed sections. Ensure inspections conform to quality plans, inspection and test plans, routings, and other controlling documents. Conduct in-process and final inspections, including weld inspections and verification of fabrication drawings. Ensure non-destructive testing (NDT) is completed when required, with reports logged appropriately. Inspect surface treatments to ensure compliance with quality standards. Verify finished goods are undamaged, packed correctly, and documented for dispatch. Liaise with client inspection teams as needed. Produce and maintain NCRs, and assist with root cause investigations. Support project close-out reviews and lessons learned exercises. Comply with health and safety responsibilities, including monitoring hazardous substances where applicable. Perform any other ad hoc duties appropriate to the role. Qualifications, Knowledge, Experience & Skills: Certified licenses for operating site-approved forklifts and overhead cranes. Apprentice trained or equivalent experience in a manufacturing, fabrication, or industrial environment. Skilled in selecting and using appropriate inspection equipment. Strong IT literacy, including Word, Excel, Outlook, and PowerPoint. Excellent verbal and written communication skills across all levels. Experienced in using inspection equipment such as CMM arms, micrometers, and verniers. Ability to read and interpret drawings, specifications, procedures, and work instructions. Strong understanding of manufacturing tolerances and industry quality standards. Knowledge of materials and their properties. Excellent observational, analytical, and problem-solving skills with attention to detail. Able to work independently and proactively set and monitor workloads. Team player with the ability to build effective working relationships. Willingness to work additional hours when required to meet business goals. Strong commitment to promoting SHEQ values and contributing to team success. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

Title: Project Manager - Fit-Out Location: Bolton Salary: £40,000 - £50,000 The Client Our client are a dynamic and rapidly expanding leader in the construction and facilities management sector. They provide a comprehensive range of services aimed at optimising the operations of commercial and residential buildings. As part of their continued growth, they are seeking a Project Manager from a fit-out background to join their team. The Role of Project Manager - Fit-Out As a Project Manager you will be responsible for overseeing and supporting the control and delivery of construction projects to meet client specifications (safety, quality, cost, time, etc.) such that all budget, risk, specification, project timescales, customer and business objectives are met in full. There will be multiple client meetings on site, so excellent stakeholder management skills are essential for this role, along with the ability to drive the site teams to ensure the business are delivering high quality projects. Key Responsibilities of the Project Manager Direct and manage project development from inception to completion. Define project scope, goals and deliverables that support business goals in collaboration with senior management and stakeholders. Develop full-scale project plans and associated communication documents. Proactively manage changes in project scope, identify potential crises, and devise contingency plans. Coach, mentor, motivate and supervise project team members and contractors, and influence them to take positive action and accountability for their assigned work. Be ultimately responsible for Health & Safety during the construction phase of projects managed. Effectively communicate and manage project commercial expectations to team members and stakeholders. Estimate the resources and participants needed to achieve project goals. Draft and submit budget proposals. Set and continually manage project expectations with team members and other stakeholders. Identify and manage project programme dependencies and critical path. Plan and schedule project programme timelines and milestones using appropriate tools. Develop and deliver progress reports, proposals, requirements, documentation and presentations as required by client. Determine the frequency and content of status reports from the project team, analyse results, and troubleshoot problem areas. Essential Skills & Qualifications Experience with fit out or full construction Valid SMSTS Certificate Construction-related academic qualification; BSc, or HNC or time-served tradesperson with proven track record in Site Management What's on Offer Competitive Salary: Based on experience. Pension Scheme: 5% pension contribution to help secure your future. Professional Development: Opportunities for continuous personal and career growth. Modern Head Office: Join a vibrant and innovative workplace with a supportive team atmosphere. Collaborative Team: A culture that values communication, respect, and shared success. Exciting Growth Potential: Be part of a growing company with a clear vision for the future. Keywords: Joiner, Joinery, Contracts Manager, Project Manager, Site Manager, Fit-Out, Refurbishments, hospitality, junior project manager Bowdon Associates is a member of the Guild of Quality Employment Agencies and has agreed to adopt the compliance and recruitment standards that form the basis their code of conduct. A quality, transparent and responsible recruitment agency committed to raising the industry standards

Do you want to join an exciting company, which is expanding quickly and looking for the right people to come and join our team? Somewhere where we develop individuals to be the best they can be and help them along their career path? Then you’d be a great fit for BMc Azzuri. We have been supporting Charity Retailers for over 10 years, providing software and services to help them benefit from technology designed especially for the sector. Our aim is to make every step of the donation and sales process as simple as possible, for donors, volunteers and customers, to maximise the potential returns for the causes they support. This Administrator role is responsible for overseeing and streamlining the administrative operations of the organization. This role ensures efficient support services, smooth day-to-day office operations, and compliance with internal policies and procedures. Main Duties and Responsibilities of the Role: • Management of the existing Customer Contracts Documentation, • Preparation of New Contracts, • Liaison with Finance Department, • Purchasing of General Office Supplies, • Management of Staff Holidays / Sickness record etc, • Liaison with HR department, • Potential Management of Gift Aid Department Person Specification: Ideally 1+ years of experience in an administrative role. Skills and Competencies: Excellent organisational skills. Strong interpersonal and communication skills. High level of attention to detail and accuracy. Proficient in Microsoft Office Suite and office management software. Ability to handle confidential information with discretion. Capable of multitasking and working under pressure. Analytical thinking and problem-solving abilities. Job Types: Full-time, Permanent Benefits: Casual dress Company pension Schedule: 8 hour shift Monday to Friday Licence/Certification: Driving Licence (preferred) Work Location: In person

Bolton We have an opportunity working on behalf of UK Facilities Management, the Operational Technology (OT) Risk Manager will act as the deployed local security leader and expert in all elements of security for General Infrastructure Management Systems (GIMS) policy. Salary: Circa£60,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification and frequent travel to all sites across the UK Security Clearance: British Citizen or a Dual UK national with British citizenship/Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: The main focus is the creation, execution and maintenance of a framework to identify and address risks associated with the devices which support MBDA's Building and Infrastructure across the UK. This will also include input into the wider group structures as and when required. The OT Risk Manager will act as the point of contact for all new, existing and legacy GIMS installations, providing advice, guidance and direction to address the multiple security risks associated with them. This includes liaising with cross business teams outside of FM, such as Cyber and InfoSec, IM and Product Cyber. The OT Risk Manager will oversee all change management activities related to the connectivity and digital interfaces of the relevant infrastructure, ensuring all change remains appropriate and complaint with policy; ensuring an evidenced position is constantly maintained by MBDA UK of continued compliance with all relevant standards which may be subject no-notice audits by MBDA Group, MOD and other customers. They will deliver technical security consultancy to the business including architecture and solution suitability to meet a complex suite of business requirements. They will create and update ISO 27001 compliant policies to specifically address the GIMS policy ensuring that all policies, processes, procedures and technical infrastructure remains compliant with MBDA UKs wider ISO 27001 ISMS as well as other certifications as appropriate. The OT Risk Manager will be a critical leader in any new infrastructure projects within MBDA UK and for reducing cyber risk to the business as part of a wider team. The OT Risk Manager will also coordinate all technical security testing within their allocated area of operations, as well as maintaining upward reporting to MBDA UK FM Director, UK Security Director and UK CISO on results and remediation progressions. They will proactively coordinate with the Principle Cyber and Information Security Advisor for all required assurance activity and evidence based reporting. They will work with FM and wider business stakeholders to create a network of Asset Owners and formally document the asset registers for their areas of operation. What we're looking for from you: CISSP, InfoSec/Cyber Degree or equivalent (Essential) Experience or relevant certifications in network security or industrial control system hardening (Essential) Knowledge of security surrounding systems enabling critical services within business (ICS/SCADA/BMS/BEMS) Comfortable with establishing and maintaining relationships with national security authorities, internal stakeholders and industry partners. Expert in security concepts for IT network architectures, applications, cloud services and hardening of operating systems within ICS and SCADA context. Ability to present risk balanced security solutions to complex problems and provide clear advice directly to key stakeholders at all levels Experience of managing and developing inexperienced IT/FM Engineers to maintain security Experience of system accreditation processes and documentation. Experience of security risk management Knowledge of business IT processes and associated approval systems Expert knowledge of modern hacking Tactics, Techniques and Procedures including impacts affecting GIMS/ICS/SCADA. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-ST1

Community Role | One-to-One Patient Care | Sociable Working Hours | Company car If you are a Chemotherapy Nurse looking to step away from the ward environment and deliver truly personalised care, this community-based role offers the chance to support patients through treatment in their own homes across the Wigan area. You will oversee a manageable caseload, work regular weekday hours, and focus on quality rather than volume. This Chemotherapy Nurse position gives you clinical autonomy while remaining fully supported by a specialist homecare organisation that works in close partnership with NHS services. The role is designed for experienced nurses who value continuity of care, professional trust, and the ability to build meaningful relationships with patients and families. Package & Benefits Excellent salary of £43,700 p/a Fully expensed company car or car allowance worth £4,800 p/a Monday to Friday working pattern, 8:00am–4pm. Excellent routes for further development Excellent annual leave entitlement Private medical insurance NMC Fees paid for About the Company In this chemotherapy role, you will be joining a nationally recognised homecare provider delivering specialist clinical services in partnership with the NHS. The organisation is known for its structured support, strong governance, and commitment to delivering safe, patient-centred care in community settings. Key Responsibilities Deliver chemotherapy treatment safely and effectively in patients’ homes. Manage a small caseload of approximately two to three patients per day. Provide education, reassurance, and tailored clinical support to patients and carers. Maintain accurate clinical documentation and report adverse events in line with protocol. About You Registered Nurse with an active NMC registration. Must hold a valid SACT passport, with competence in cytotoxic administration, cannulation, and clinical assessment. Full UK driving licence.If you would like to explore whether this Chemotherapy Nurse role is right for you, even if your CV is not fully up to date, we would be pleased to have a confidential conversation. Apply now or contact Dale, (phone number removed) for further info

Community Role | One-to-One Patient Care | Sociable Working Hours | Company car If you are a Chemotherapy Nurse looking to step away from the ward environment and deliver truly personalised care, this community-based role offers the chance to support patients through treatment in their own homes across the Wigan area. You will oversee a manageable caseload, work regular weekday hours, and focus on quality rather than volume. This Chemotherapy Nurse position gives you clinical autonomy while remaining fully supported by a specialist homecare organisation that works in close partnership with NHS services. The role is designed for experienced nurses who value continuity of care, professional trust, and the ability to build meaningful relationships with patients and families. Package & Benefits Excellent salary of £43,700 p/a Fully expensed company car or car allowance worth £4,800 p/a Monday to Friday working pattern, 8:00am4pm. Excellent routes for further development Excellent annual leave entitlement Private medical insurance NMC Fees paid for About the Company In this chemotherapy role, you will be joining a nationally recognised homecare provider delivering specialist clinical services in partnership with the NHS. The organisation is known for its structured support, strong governance, and commitment to delivering safe, patient-centred care in community settings. Key Responsibilities Deliver chemotherapy treatment safely and effectively in patients homes. Manage a small caseload of approximately two to three patients per day. Provide education, reassurance, and tailored clinical support to patients and carers. Maintain accurate clinical documentation and report adverse events in line with protocol. About You Registered Nurse with an active NMC registration. Must hold a valid SACT passport, with competence in cytotoxic administration, cannulation, and clinical assessment. Full UK driving licence. If you would like to explore whether this Chemotherapy Nurse role is right for you, even if your CV is not fully up to date, we would be pleased to have a confidential conversation. Apply now or contact Dale, 020 3314 7746 for further info. TPBN1_UKTJ

Senior Project Manager Location: Wigan (Office based) Salary: Competitive Salary The Business We are a fast-growing engineering business developing and manufacturing modular process packages for the water and industrial sectors. Our technology is patented, proven, and already embedded into major UK frameworks. This is not a corporate environment. We are an owner-led, entrepreneurial business where senior people get involved, solve problems, and help build the operation as it scales. The Role This is a senior technical and operational role, responsible for taking customer requirements and turning them into fully engineered, manufactured packages. The role is focused on: Design control (SOLIDWORKS experience essential) Manufacturing coordination Customer and partner interface End-to-end project delivery from concept to shipped product Key Responsibilities Own engineering projects from customer enquiry through to finished build Translate customer and partner requirements into engineered solutions Produce and manage CAD designs, layouts, and technical documentation Coordinate manufacturing, suppliers, and internal resources Act as the main technical interface with customers and partners Manage multiple projects in parallel in a fast moving environment Support development of internal processes as the business scales What We Are Looking For Degree-qualified Mechanical Engineer (or with accreditations) Strong CAD capability (SolidWorks or equivalent) Experience in engineered products or packaged systems Comfortable in small, entrepreneurial businesses Strong communicator who can deal with customers and suppliers Organised, adaptable, and happy wearing multiple hats Water industry experience is preferred but not essential. Why This Role Real ownership of projects, not just a slice of them Direct impact on a growing business with guaranteed long-term growth No corporate politics or layers of management Opportunity to shape how the engineering function evolves Apply or message for a confidential chat. Interested? To apply for the Senior Project Manager position, here are your two options: "This is the job for me! When can I start?" - Call now and let’s talk through your experience. Ask for Michelle Fletcher on (phone number removed) between 9am - 2pm "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know. PPTP

SENDCO – Interim Opportunity in a Bolton Secondary School Location: Bolton Pay: £220 – £250 per day Start Date: After Easter break 2026 Job Description: A forward-thinking and supportive secondary school in the Bolton area is seeking an experienced and passionate SENDCO to join them on an initial temporary basis starting after Easter. This is an excellent opportunity for someone looking for a short-term or interim role, with the potential for extension depending on the needs of the school. The school has a strong inclusive ethos, a supportive senior leadership team, and a clear commitment to student wellbeing and progress. The Role As SENDCO, you will: * Lead and manage SEND provision across the school * Oversee EHCPs, Annual Reviews, and statutory processes * Coordinate Teaching Assistants and support staff effectively * Support teaching staff to deliver high-quality inclusive practice * Work closely with parents, carers, and external agencies * Contribute to whole-school inclusion strategy * Ensure compliance with the SEND Code of Practice This role is predominantly non-teaching. There is no requirement for regular class-based teaching at this stage. However, the successful candidate will be expected to provide cover for one period per day within the school’s internal Alternative Provision (AP). The majority of the role will focus on coordinating SEND provision, managing and preparing EHCP referrals and documentation, and ensuring that all statutory processes are well-evidenced and compliant. The Ideal Candidate Will Have: * Qualified Teacher Status (QTS) * National Award for SEN Coordination (or working towards it) * Strong knowledge of SEND legislation and statutory requirements * Experience within a secondary school setting * Excellent leadership, communication, and organisational skills * A child-centred and solution-focused approach Why This School? * Supportive and approachable senior leadership team * Strong pastoral and safeguarding culture * Inclusive ethos at the heart of everything they do * Excellent facilities and resources * A welcoming and collaborative staff team This is a temporary position offering the opportunity to make an immediate impact in a key leadership role. To apply or find out more, please follow the link

Description The Storeman is responsible for the safe, accurate and efficient control of materials, tools, consumables and small plant across the site. This role ensures that deliveries are received correctly, stock is managed and organised, and materials are issued promptly to support site productivity. Working within the wider logistics team, the Storeman plays a crucial part in maintaining a well‑run compound and ensuring that all materials handling meets Careys’ high safety and quality standards. Key Responsibilities * Receive, check and sign for deliveries in accordance with purchase orders and delivery documentation. * Inspect incoming materials for correct quantities, specification and damage. * Organise unloading areas safely and coordinate with drivers, plant ops and banksmen where required. * Maintain accurate stock records, including logging goods in/out and conducting regular stock checks. * Ensure all materials are clearly labelled, stored securely and segregated where necessary (e.g. COSHH). * Keep stores, containers and compound areas tidy, accessible and compliant with safety standards. * Issue materials, tools and small plant to operatives and subcontractors and maintain proper tracking. * Monitor stock levels and notify the logistics manager of low or urgent requirements. * Support the management of PPE, consumables and lifting accessories as required. * Promote safe working practices and highlight hazards, near misses or non‑conformances. * Assist with waste segregation, traffic management and general logistics duties when needed. Skills, Knowledge and Expertise * Strong organisational and time management skills. * Excellent attention to detail during stock control and documentation. * Effective communication with suppliers, drivers and site teams. * Ability to work independently and prioritise tasks in a busy site environment. * Positive, proactive and safety‑driven approach. * Understanding of construction materials, components and handling requirements. * Awareness of safe loading/unloading procedures and traffic flow on site. * Familiarity with stock systems, delivery notes and inventory controls. * Basic knowledge of COSHH and safe storage practices. * CSCS card – essential. * Previous experience as a Storeman, Materials Controller or similar role on a construction project – essential. * Experience managing stores, compounds or stock control systems – desirable. * FLT / Telehandler / NPORS / CPCS plant tickets – desirable depending on site requirements. * Manual handling and COSHH training (often provided via site induction). Benefits * Competitive pay * PPE provided * Training and upskilling opportunities * Long-term project pipeline with Careys

We are currently seeking an experienced Site Engineer for a 278 works package based in Wigan. This is an excellent opportunity for a skilled engineer to secure 5 months of work with strong day rates and an immediate start. Location: Wigan Start Date: ASAP Duration: 5 Months Rate: £300 – £350 per shift We require a competent engineer with proven experience delivering 278 works and highway schemes, working to tight programmes and maintaining high quality standards. Key Responsibilities: Setting out and surveying for 278 works packages Overseeing highway works in accordance with design specifications Managing QA documentation and site records Coordinating with subcontractors and site teams Ensuring health & safety compliance across the project Supporting the project manager with progress reporting The successful engineer will have: Strong setting out experience on 278 works or highway projects Proficiency with total station and GPS equipment Ability to interpret technical drawings CSCS card (essential) Previous experience as a site engineer on local authority or developer-led schemes This role would suit a proactive engineer who can work independently and drive programme on a busy 278 works package. The ideal engineer will be confident managing daily site activity while maintaining accuracy and compliance. If you are an experienced engineer available for an immediate start in Wigan and looking for a well-paid 5-month contract, apply today with your CV

Press Brake Operator We are currently seeking a skilled and reliable Press Brake Operator to join our manufacturing team. This is a hands-on role working with a variety of materials to produce high-quality components, supporting production targets and maintaining excellent safety and quality standards. The Role As a Press Brake Operator, you will be responsible for the safe and efficient operation of press brake machinery, producing components to specification while ensuring all work meets strict quality and inspection requirements. Key Responsibilities Operate press brake machinery to manufacture components and assemblies Set machines to pre-determined parameters and specifications Work with materials including carbon steel, stainless steel, and others as required Read and interpret engineering drawings to ensure accurate production Carry out material handling, including unpacking and repacking of parts Pack and kit components ready for downstream processes Use overhead crane equipment safely and effectively Ensure all work meets required inspection and quality standards Maintain a clean, organised, and safe working environment Follow all company health and safety procedures at all times Complete relevant documentation such as route cards and process trackers Support continuous improvement and minimise defects and waste Key Objectives Deliver high-quality pressed components in line with company standards Minimise quality defects and rework Maintain a strong focus on health & safety Meet production, quality, and delivery targets Continuously develop skills and knowledge About You Proven experience operating a press brake machine Ability to read and understand engineering drawings Overhead crane certification (essential) FLT licence (desirable) Familiarity with manufacturing documentation (route cards, travellers, etc.) Strong attention to detail and commitment to quality Good communication skills and ability to follow instructions Ability to work both independently and as part of a team Own transport preferred Additional Information You may be required to undergo a security background check This is a physically active role involving material handling To apply, please submit your CV

Electrical Inspector Defence Manufacturing Location: Bolton, Greater Manchester Our client, a highly respected UK Ministry of Defence partner, is seeking an experienced Electrical Inspector to join their manufacturing team in Bolton. This role is key to ensuring the quality and certification of electrical hardware used in critical defence programmes. You will work in a structured manufacturing environment, supporting product certification and maintaining the highest standards of workmanship and compliance. Key Responsibilities Certify products in line with defined processes and procedures Inspect electrical assemblies to confirm correct build, connections, and finish Identify physical damage, surface defects, or deterioration Carry out intermediate inspections and non-product certification checks Monitor operators within the Product Certification Scheme Complete and certify manufacturing documentation and manage non-conforming items Produce inspection and quality records and use specialised inspection tools Support audits and ensure ongoing compliance with manufacturing standards Skills & Qualifications Essential Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard or Electrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) and Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved Proven experience inspecting the work of others Several years experience in a skilled manufacturing or inspection role No colour blindness Desirable IPC-610 and IPC-620 certification or training Manual handling and ESD training Strong attention to detail and quality standards What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. TPBN1_UKTJ

Technical Administrator 12 month contract Based in Bolton Offering up to £24.19ph Inside IR35 Do you have an understanding of asset management principles and systems? Do you have experience carrying out costing activities? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Technical Administrator, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing technical administration support to the Environmental Stress Screening (ESS) and Mechanical Team Updating and controlling company equipment records, including archiving and transfer activities Carrying out costing activities alongside ESS engineers Supporting the ESS & Mechanical team by generating and updating technical documentation such as calibration specifications and proving documents Processing of facility documentation including configuration control and external visitor paperwork Liaising with Design and Manufacturing Engineering on equipment documentation issues Assisting in periodic competency monitoring checks on engineering certification documentation Raising and processing purchase requisitions to assist engineers in the procurement of items to support engineering activities. Your skillset may include: Good understanding of configuration control and asset management principles and systems Strong attention to detail MS Office - Proficient in using Word, Excel, and PowerPoint to generate technical material An awareness of budgetary management Knowledge of SAP If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Technical Administrator 12 month contract Based in Bolton Offering up to £24.19ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Company description: At Warburtons, family is at the heart of our business. Five generations'? worth of expertise that goes into making our bakery products allows us to continue a tradition of baking inherited over the past 150 years. Warburtons is the largest bakery brand in the UK, but that doesn't allow us to rest on our laurels. We are pioneers of the industry and ambitious market leaders, always seeking to challenge ourselves and convention. It is part of our philosophy to provide honest good sense on issues of health and well-being, helping the whole family to enjoy our products as part of a healthy, balanced diet, through a range of products to suit all meal occasions, lifestyles and tastes. Job description: As the UKs No. 1 Bakery Brand we have been baking bread since 1876. Today, we are proudly a fifth-generation family, with the introduction of the sixth generation, supplying over 18,000 retail customers from 11 bakeries and 16 depots, producing a range of over 70 products including gluten and wheat free. Family and values are what makes us different, and we are a proud bunch, join us and you too could be proud to be Warburtons. The Recipe Responsible for the design, planning and delivery of all IT infrastructurewhile simultaneously managinga team of technical and support analysts responsible for maintaining thatinfrastructure and ensuring system availability and performance is maintained. Key Accountabilities and Measures System availability/service level • ensure that the IT systems are available to be used when needed for all 2000+ computer users, that systems are properly monitored, controlled, reviewed and improved to meet the changing requirements of our users. System design/suitability work collaboratively with the Head of IT Controls and Head of Technology Platforms to lead the design, planning and implementation of the current and future IT Infrastructure to ensure it supports future business requirements in terms of capacity, capability, resilience and security. Change control - manage the process to control the introduction of all IT infrastructure system changes. Business continuity - design, document, implement and manage the process and IT Operations to ensure that in the event of a disaster the IT technical and service facilities can be recovered within agreed time scales and at a level of cost that the business is willing to support. Cost/efficiency - continually seek out ways in which the costs of IT service provision can be reduced, and the quality improved. Create supporting documentation to seek approval for any such opportunities. Relationships with external stakeholders / providers Select and manage suppliers including negotiation of high cost contracts up to circa £1.5m pa. Team development • lead, manage, coach and develop the IT Technical Analyst & Support Teams to achieve the plans, objectives and targets set. Essential Ingredients 10 years plus experience leading IT Infrastructure and Support Teams Degree and/or appropriate professional qualifications in relevant subjects Familiarity with ITIL, documentation, and change control processes Skilled in vendor management, budgeting, and procurement Strong understanding of servers, networks, storage, and security (technologies to include Azure, Cisco Networking, Citrix, Hyper-V, Microsoft 365, Nutanix, Sophos) Strong communication skills with the ability and willingness to support and collaborate across teams Ability to report performance, risks, and system health to leadership Strong attention to detail and accuracy Willing to study professional qualifications as required Self-starter with confidence working both independently and as part of a team Strong IT literacy and experience using MS Office suite Works effectively with peers and stakeholders, managing expectations appropriately Demonstrates strong analytical and problem-solving skills Demonstrates initiative and a willingness to take on new challenges Ability to organise, prioritise, and manage time effectively Ability to work under pressure and meet agreed deadlines Curious mindset with a commitment to personal and professional development Extra Dough At last and by no means least, you will want to know what your breads worth: A slice of the annual profits (discretionary profit share) Family time is important to us and we know it will be to you so you have the opportunity to purchase up to an extra weeks annual leave. Award winning pension scheme with company contributions of 7% Life assurance Products you will love along with deals and discounts for you and the family through our Extra Dough website Continued investment in your personal development Fully stocked kitchens filled with our delicious products for you to enjoy with your daily brew! Support for your health and wellbeing, including access to free physiotherapy, 24/7 access to a confidential helpline for practical advice and a comprehensive occupational health service We respect and value difference. We look to create an inclusive workplace that promotes and values diversity. Companies that are diverse in age, gender identity, race, religion, sexual orientation, physical or mental ability, ethnicity, or any other aspect which makes them unique, are proven to be better companies. More importantly, creating an environment where everyone, from any background, can do their best work, is the right thing to do. TPBN1_UKTJ

At Parr Fire Protection we are seeking a Senior Accounts Assistant (Maternity Cover) to join our finance team, covering our Finance Manager’s maternity leave. This role is key to ensuring the smooth running of financial operations, supporting accounts payable and receivable, maintaining accurate records, and helping the business consistently deliver a first-class service. What you receive for joining us: We offer a salary of £30,000 per annum along with the opportunity to work within a collaborative office environment. You’ll play a vital role in supporting financial processes, ensuring supplier and customer accounts are managed efficiently, and contributing to accurate reporting and reconciliations. In addition, we offer 25 days holiday per year, and company pension. Office hours are 9am-5pm Monday to Friday. Here’s a look at some of the things you’ll be doing: Manage accounts payable – Process supplier invoices, verify accuracy, reconcile supplier statements, and resolve any invoice or payment disputes. Schedule timely payments and maintain accurate records. Approximately 50 suppliers Manage accounts receivable – Generate and send invoices, process customer payments, reconcile the accounts receivable ledger, and monitor aged balances. Liaise with customers regarding late payments or disputes. Approximately 2000 customers Bank reconciliation and financial processing – Perform weekly bank reconciliations, accurately process receipts, payments, and transfers, and resolve any unreconciled items in line with company policies and audit standards Systems and administration support – Maintain financial documentation and filing, support office administration, and use Sage 50 accounts/payroll software to ensure accurate financial record-keeping Can you show experience in some of these areas: Strong knowledge of accounting standards, bank reconciliation, and Sage 50 accounts/payroll software Excellent communication skills and comfortable liaising with suppliers, customers, and colleagues at all levels of the business A proactive, “can-do” attitude with the ability to prioritise workloads, adapt to change, and take ownership of responsibilities Excellent attention to detail, problem-solving skills, and the ability to work efficiently under pressure Do you see yourself reflected in the description above? If so, we encourage you to submit your application today. Unsure whether your experience aligns perfectly? Don’t hesitate to apply, we value transferable skills and will carefully consider all applicants. Introducing our organisation: Parr Fire Protection are part of Complii: We are proud to be a customer-focused organisation committed to operational excellence and efficient financial management. Our finance team works closely with all departments to ensure accounts, payments, and reconciliations are handled accurately, efficiently, and compliantly, enabling the business to deliver consistently high standards of service

Assistant Quantity Surveyor - Commercial Fit Out Wigan, North West - Salary: Competitive, £28,000 - £38,000 + package (DOE) The Opportunity A growing and well-established commercial construction and fit-out contractor in the North West is looking for an Assistant Quantity Surveyor to join their team. This hybrid role offers a mix of office-based work in Wigan and site visits across the North West, providing hands-on experience in managing the financial and contractual aspects of a variety of commercial fit-out projects. You will work closely with Project Managers, Quantity Surveyors, subcontractors, and other stakeholders to ensure projects are delivered efficiently, on budget, and to the highest standards. This is an ideal role for someone early in their commercial construction career looking for structured development and exposure across multiple sectors, including commercial, retail, leisure, public sector, and specialist fit-out projects. Key Responsibilities Measurement & Costing Schedule works packages based on architectural drawings and site surveys Use industry-standard software to organise, measure, and cost works packages Monitor and control project costs and budgets, identifying variations as required Valuation & Payment Conduct regular valuations of completed work and prepare interim payment applications Review and approve subcontractor and supplier valuations and invoices Contract Administration Prepare and manage contracts, subcontract documentation, and instructions Ensure compliance with contractual obligations and handle disputes or claims Procurement Source and negotiate with suppliers and subcontractors to secure competitive packages Manage procurement schedules to ensure timely delivery of materials and services Reporting & Risk Management Provide accurate forecasts of project costs and financial performance Identify financial and contractual risks and support mitigation strategies Maintain accurate records of transactions, contracts, and project documentation Site Inspections & Collaboration Conduct site visits to monitor progress and verify quality standards Work closely with project teams, engineers, architects, and other stakeholders Provide financial and contractual advice to support project delivery Essential Requirements Bachelor's degree in Quantity Surveying Minimum of 2 years' experience as an Assistant Quantity Surveyor in the construction industry Knowledge of construction processes, materials, and cost management Proficient in quantity surveying and project management software Strong analytical and numerical skills Excellent attention to detail and organisational abilities Effective communication and negotiation skills Why Apply? Competitive salary, negotiable depending on experience and qualifications Hybrid working: office in Wigan and site visits across the North West Company benefits include: Employee Assistance Programme for wellbeing Pension scheme (currently Royal London) Staff reward and recognition programme Support for professional development with training opportunities and CPD encouraged Be part of a company that values team working, safety, and exceeding client expectations Apply: If you're interested in this opportunity, then please get in touch today with our Commercial Specialist, Mark Harris. Building Careers UK specialises in Construction and Property recruitment and serves as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the Terms and Conditions, Privacy Policy, and Disclaimers which can be found on our website. We welcome applications from individuals of all backgrounds, experiences, and identities. Our recruitment process is designed to ensure equal opportunities for all candidates, regardless of age, gender, race, ethnicity, religion, disability, sexual orientation, or any other characteristic. Please Note: Due to high volume of applicants, only those shortlisted will be contacted. INDCOM

Experience within the Window and Door industry is essential. Window and Door Order Processor Salary: £25,000 – £30,000 per annum Location: Bolton. Chase Taylor Recruitment is proud to be working with a long-established and successful window and door company based in Bolton. Our client has been supplying and installing high-quality uPVC windows and doors for many years. About the Role We are looking for an experienced Window and Door Order Processor to join this dedicated team. The ideal candidate will have previous experience within the fenestration industry, using software such as Window Designer, LogiKal, or Business Micros to process orders efficiently and accurately. Key Responsibilities * Prepare and send quotes to customers via email or technical documentation * Obtain quotes from suppliers for materials and stock * Process customer orders using industry-specific software * Communicate with clients regarding orders, delivery timescales, and any issues * Gather job details to produce accurate quotes * Raise and manage purchase orders, ensuring all parts are ordered and delivered on time * Complete administrative tasks as required * Provide outstanding customer service at all times * Receive training and ongoing support where needed About You * Must have recent experience processing uPVC window and door orders * Ability to read and understand technical drawings (e.g., CAD) * Strong attention to detail and excellent communication skills * Capable of working independently and as part of a team * Able to manage deadlines and achieve KPI targets If you have the relevant experience in order processing within the fenestration industry and are looking for your next career move, apply now or contact Chase Taylor Recruitment, quoting reference MM6391 for more information

Senior Electronics Engineer Location: Bolton, Greater Manchester Employment Type: Full-time, Permanent Are you an experienced Electronics Engineer looking for your next challenge in a fast-paced, innovative technology company? Our client, a leading designer and manufacturer of cutting edge, bespoke electronic solutions, is looking for a talented individual to join their growing team in the Bolton area. The Role As an Electronics Engineer, you will play a key role in designing, developing, and delivering cutting-edge electronic hardware solutions. You'll work closely with cross-functional teams to drive product development from concept to deployment, ensuring performance, reliability, and compliance with industry standards. This is a hands-on technical role that also offers leadership opportunities, making it ideal for someone with a strong engineering foundation and a passion for mentoring and team collaboration. Key Responsibilities * Design electronic hardware, create schematics, and develop PCB layouts * Deliver product development projects in line with Project Frameworks * Interpret project deliverables and communicate objectives to the team * Coordinate with internal stakeholders, including Field Operations and Manufacturing * Support prototype development and new product introduction (NPI) * Maintain and manage electronics-related documentation and ISO9001-compliant processes * Collaborate with the Technology team to identify and validate new technologies What They are Looking For Experience: * Minimum 5 years of hardware design experience (preferably using Altium) * Skilled in testing and validating electronic components and systems * Experience with both digital and analogue circuit design, including microcontrollers * Familiar with communication systems (LTE, Ethernet, CANBus, I2C, etc.) * Experience with control systems, sensors, and LCD technology (Desirable) * Understanding of the full product development lifecycle and project planning * Programming experience for microcontrollers is desirable Skills & Attributes: * Strong analytical and problem-solving abilities * Able to juggle multiple projects and adapt quickly to new platforms * Excellent communicator, comfortable working across multi-disciplinary teams * Demonstrated leadership abilities and a keen interest in mentoring others * Hands-on and detail-oriented with a passion for technology innovation Why Join: Our client offer a collaborative environment where innovation thrives. You'll be part of a team that values creativity, continuous improvement, and professional development. Based in Bolton, they are proud to contribute to the UK tech sector and serve global clients with cutting-edge electronic solutions

An exciting opportunity for an experienced Manufacturing Test Engineer to join our Circuit card assembly Engineering team. This is a fast-paced but friendly and inclusive Manufacturing environment that will challenge you Salary: Circa £45,500 depending on experience Dynamic (hybrid) working: 4 or 5 days per week on-site due to workload classification Security Clearance: British National Only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As part of our continued growth, we are looking for a highly skilled and methodical Electronics Manufacturing Test Engineer to join our Circuit Card Assembly team. In this critical role, you will specialise in diagnosing faults on PCB assemblies down to component level. Your expertise will be crucial in accurately identifying root causes of failure, providing technical reports and supporting the implementation of corrective actions, which in turn will be utilised to improve production yield and ensure programme targets are achieved. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to time served experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. Key Responsibilities: Technical Root Cause Analysis:Performing fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc. Test Specification/Instruction Generation:Supporting the introduction of new test facilities by generating test specifications, operator instructions, and maintaining appropriate configuration control. Cross-Functional Collaboration:Serving as a key point of contact, collaborating closely with Manufacturing, Quality, Process, Design Engineers, and other stakeholders to overcome technical challenges and drive product improvements. Design & Development Support:Providing crucial Test Engineering input during the design and development phases, from initial concept through to Production Readiness Reviews.What we're looking for from you: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 AND Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject)OR BEng/BSc in relevant Engineering/Technical Degree Expertise in Electronics Test & Diagnosis:A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Test Equipment Experience:Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Manufacturing Systems Proficiency:Familiarity with enterprise resource planning, manufacturing execution and version control system tools (e.g., SAP, MES, PLM) for logging test activities and generating non-conformance quality reports. Desirable Experience working with RF-based circuitry would be preferable, but is not mandatory.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Site Manager – Bolton / Northwest Projects Salary: £50,000 + £5,000 car allowance Start: Immediate We are partnering with a well-established construction business delivering high-quality industrial and commercial projects across the Northwest, ranging from £200k to £20m. They are seeking an experienced Site Manager based locally to their Bolton office to manage and oversee multiple projects. About the Role In this role, you will take overall responsibility for the successful delivery of projects, focusing on planning, coordination, and management rather than hands-on construction. You will oversee site teams and subcontractors, manage budgets and timelines, and ensure compliance and quality standards are maintained across all projects. Key Responsibilities Oversee day-to-day site operations and ensure projects are delivered on time, within budget, and to the required standards. Manage and coordinate site teams and subcontractors, ensuring productivity and compliance. Collaborate with project managers and stakeholders to plan and execute project milestones effectively. Monitor project costs, labour, and material usage to ensure profitability. Maintain accurate project records, including progress reports, documentation for variations, and change orders. Ensure compliance with all building regulations, permits, and inspections. Implement and maintain quality assurance processes to consistently meet client expectations. Uphold company policies, procedures, and professional standards across all projects. Requirements Valid CSCS, SMSTS, and First Aid certifications. Minimum of 3 years’ site management experience in industrial/commercial projects. Experience managing multiple projects across the Northwest. Proficient in Microsoft Office (Excel, Word, Outlook, Project). Ability to interpret programmes, drawings, and technical specifications. Full UK driving licence. Based locally to the Bolton area. Why This Role? Competitive salary of £50k plus £5k car allowance. Immediate start on industrial and commercial projects ranging from £200k to £20m. Opportunity to focus on management and oversight with a reputable and growing construction business

KM Recruitment is a specialist UK wide recruiter for the Skills and Employability Sectors Job Title: Bus Driver Trainer Assessor (Trainee or Qualified) Location: Greater Manchester - Candidates must be flexible with travel Salary: £34,000 Package: Excellent Holiday Entitlement, Mileage, Mobile, Laptop + much more Type: Full Time, Permanent We are delighted to offer this role as a Trainee or Qualified opportunity – full training will be provided for the successful candidate to achieve the Trainer/Assessor award. Essential Criteria: Must hold valid PCV and CPC licences. Hold a minimum of 2 years' experience as a Bus Driver. Must have experience of training/mentoring other Bus Drivers on-the-job. Full, clean, UK driving licence and use of own vehicle.Duties: Train, assess and deliver Apprenticeship Standards in Passenger Transport Services Bus Driver at level 2. Record professional discussions on specific units / topics based on knowledge, independent research and reflective accounts. Delivering classroom / group-based training to groups of learners, along with field-based assessments. Managing your diary efficiently to ensure timely visits and reviews are conducted. Organise and maintain documentation on learners' progress. Overcome barriers to learning and adapt delivery to meet learner’s needs. Work to learner review and completion timescales.Personal Skills: Organisational skills are a must, as well as the ability to plan your time effectively Confident and professional with the ability to inspire and motivate people. Quality driven and prepared to go the extra mile for your learners.Please note: KM Recruitment receive a high number of applications for each role advertised and although we would like to we are not always able to deliver feedback to unsuccessful candidates. If you have not been contacted within 4 days then unfortunately your application has been unsuccessful. Thank you for your interest and keep an eye on our website for future opportunities. KM1

Salary: £26,190.45 Location: SuperBike Factory, Macclesfield Employment Type: Permanent, Full time Who We Are SuperBike Factory is Europes largest used motorcycle retailer, with over 3,000 bikes in stock over six locations across the UK and has recently undergone a transformation from the ground up. New leadership, smarter systems and clearer ways of working mean were now leaner, sharper and fully focused on one thing: delivering straightforward, ride-ready bikes to more riders than ever before. That transformation puts us in growth mode. Volumes are rising, demand is strong, and were building a team that can scale with it people who want to work in a business that knows where its going and how its going to get there. If you want to be part of a modern, data-driven, customer-focused motorbike retailer with momentum, ambition and real opportunity, there has never been a better time to join SuperBike Factory. Overview Know your way around a bike deal, from negotiating and valuing motorcycles to managing multiple conversations at once. With industry experience and a strong mechanical eye, this role offers an excellent opportunity to turn your knowledge into real earning power. As a Trade Sales Executive youll join our dynamic team in Macclesfield as someone who can confidently handle both purchasing from the public and selling to the trade, all while keeping deals smooth, accurate, and profitable. Main responsibilities: Handle wholesale sales to traders, auction buyers, and dealerships. Ensure trade handovers and documentation are handled professionally. Liaise with delivery drivers to confirm bike condition and adjust pricing if needed. Ensure all logistics, paperwork, and keys are in order before delivery. Manage multiple deals daily via phone, email, and in person. The better you buy and sell, the more you earnsimple as that. Any other duties within the post holders competence as requested. Benefits: Netflix Membership Discounted Gym Membership Group Life Assurance Staff Discount on Bikes and accessories Cycle to Work Scheme Health & Wellbeing Support (mental health, fitness plans, nutrition advice, 24/7 doctor helpline) Enhanced Maternity, Paternity, and Sickness Pay Qualifications/ Education Essential GCSE English & Maths at Grade C or Grade 4 and above or equivalent Experience Essential Experience working within a similar role within motorcycle retail, trade, or auction. Skills & Knowledge Essential Good mechanical understanding in order to spot cosmetic and mechanical faults. Good negotiation skills to be able to secure the right deal. Good logistics coordination comfortable working with drivers and handling collections. Strong organisational skills with the ability to manage multiple priorities. Excellent communication and interpersonal skills. Excellent verbal and written communication skills. Personal Attributes Essential Excellent eye for detail, with the ability to quickly identify and resolve issues. Strong communication skills to liaise effectively between departments and with customers. Competent in numeracy, literacy, and IT skills for managing documentation and reporting. A flexible attitude towards work hours and responsibilities is necessary. Basic understanding of motorcycle maintenance and a passion for motorcycles. Ability to work to tight deadlines in a fast-paced, customer-facing environment. Working Pattern 41.25 hours per week on site. Working hours include 1 in 3 Saturdays Sounds interesting? Apply today and take the next step in your motorcycle career with SuperBike Factory. We are authorised by the Financial Conduct Authority (FCA) to carry out regulated financial service activities and offer credit to consumers. On formal acceptance of employment for the above position at Superbike Factory, successful applicants are subject to a level of pre-employment screening prior to commencing employment. The screening includes Credit history Criminal record/DBS check. NB. Employment credit searches will not affect your credit rating. TPBN1_UKTJ

Customer Service Assistant Location: Tyldesley Department: Customer Service Contract: Temporary – 3 Months Reports to: Customer Service Representative The Role An established organisation based in Tyldesley is seeking a capable and organised Customer Service Assistant to join their team on a three month temporary contract. This position plays an important part in ensuring customer operations run smoothly. You will focus on accurate order processing, forward planning of despatches and clear communication around shipments. By taking ownership of structured, process led tasks, you will enable the wider Customer Service team to concentrate on managing key accounts and more complex customer requirements. This role would suit someone who enjoys working methodically, takes pride in accuracy and understands the importance of getting the detail right. Key Responsibilities Order Management and System Processing Accurately enter and manage customer orders within CRM and ERP systems Validate part numbers, quantities, delivery dates and pricing before release Despatch orders in the CRM using correct bundle configurations to maintain stock accuracy Load confirmed orders into the relevant planning system two weeks prior to the requested delivery date to support production planning Maintain accurate system data and ensure full control of the order lifecycle Pricing and Governance Apply customer pricing using official price lists Cross check all order lines to ensure billing accuracy Escalate any pricing discrepancies before order confirmation Forward Logistics Planning Prepare picking lists for orders due to ship two weeks in advance Upload picking lists into the warehouse management system to support timely fulfilment Monitor shipment readiness against delivery dates Identify potential risks early and raise concerns where required Logistics and Despatch Coordination Coordinate physical despatch from site and warehouse Generate and upload despatch notes immediately upon shipment Issue formal despatch documentation to customers without delay Obtain and communicate tracking numbers proactively Ensure alignment between CRM records, warehouse systems and physical shipments Supply Chain Liaison Work closely with the Purchasing department on airfreight bookings and urgent shipments Maintain clear communication between Customer Service, Warehouse and Purchasing Escalate urgent matters to prevent disruption to customers Customer Communication Provide proactive shipment confirmations and tracking updates Share picking lists and relevant documentation when required Maintain clear visibility of shipment status Ensure there are no communication gaps following despatch Administration and Audit Support Maintain accurate digital and physical filing of order documentation Support the retrieval of records during audits Uphold strong document control and version accuracy Contribute to improvements that enhance service quality and operational efficiency About You 1 to 2 years experience in Customer Service or Order Processing Comfortable working with ERP systems and warehouse management platforms Confident using Microsoft Excel Strong attention to detail, particularly when validating pricing You will also be: Proactive and solution focused Calm under pressure Accountable and dependable Highly organised with strong time management skills Methodical in your approach Clear and professional in your written communication Confident escalating issues when necessary

Technical Training Specialist - Instrumentation, Control & Automation Bolton, Greater Manchester Full Time | Permanent | 37 hours per week Competitive Salary + Excellent Benefits An exciting opportunity has arisen for a Technical Training Specialist with strong experience in Instrumentation, Control and Automation to join a leading organisation's technical training team based in Bolton. This role is ideal for someone with solid operational or engineering experience who is passionate about developing the next generation of technical professionals. You will play a key role in developing and delivering apprenticeship training programmes, supporting apprentices as they develop the knowledge, behaviours, and technical skills required within operational environments. Working as part of the Education Delivery team, you will help design training programmes, deliver classroom and practical learning, and ensure apprentices progress successfully through their qualifications. The Role As a Technical Training Specialist, you will support the development and delivery of apprenticeship standards relating to Instrumentation, Control and Automation, ensuring apprentices receive high-quality technical training aligned with industry requirements. You will collaborate with operational teams and subject matter experts to develop training materials and ensure apprentices gain both practical and theoretical understanding of their discipline. Key Responsibilities ·Work with operational teams to identify training requirements and curriculum content, including time spent in operational environments to build technical understanding. ·Collaborate with subject matter experts and industry groups to develop high-quality apprenticeship training materials. ·Design and develop structured learning programmes including lesson plans, schemes of work, and delivery schedules. ·Deliver engaging training sessions covering both technical theory and practical application. ·Support apprentice onboarding, including assessment centres, initial assessments, and individual learning plans. ·Monitor and assess apprentice progress against programme objectives. ·Conduct regular progress reviews and development discussions with apprentices. ·Carry out competency assessments and field-based observations. ·Ensure compliance with safeguarding policies and provide appropriate support to learners. ·Maintain accurate training records and documentation to meet regulatory requirements from organisations such as Ofsted and the Department for Education. ·Continuously review and improve training programmes to ensure effective learning outcomes. Technical Training Specialist -... About You We are looking for someone with strong technical experience in Instrumentation, Control and Automation, combined with the ability to communicate technical information clearly and effectively. You may already be working in training or education, or you may be an experienced engineer looking to transition into a training or mentoring role. Essential Skills & Experience ·Extensive operational experience in Instrumentation, Control and Automation. ·Strong understanding of relevant legislation and technical standards. ·Ability to develop training content tailored to operational business needs. ·Excellent communication and interpersonal skills. ·Ability to engage effectively with apprentices, colleagues, and management. ·Self-motivated with strong organisational skills. Qualifications ·Level 5 Teaching in Education qualification (or willingness to work towards). ·GCSE Maths and English (A-C / 4-9) or equivalent. ·Assessor qualification or willingness to work towards. ·Minimum Level 3 qualification in Instrumentation, Control and Automation. Benefits ·26 days annual leave, increasing to 30 days after four years, plus bank holidays ·Competitive pension scheme with strong employer contribution ·Performance-related bonus scheme ·Comprehensive healthcare plan ·Gym and wellness discounts ·Enhanced parental leave schemes

Who are McHale Komatsu and why you should work with us At McHale Komatsu we are proud to be one of the largest construction equipment distributors in the UK. We supply some of the world’s most exciting and ground-breaking products including Intelligent Machine Control (iMC) and Hybrid Excavators reducing our customers fuel usage. We value our local community – with wanting to improve lives and minimising environmental impact being at the top of our lists. We are continuously building a culture where enthusiastic and motivated people (just like you!) can construct a life-long career, within a reputable brand. Known for our quality and innovation, we are regularly searching for talented individuals to join our diverse, and friendly team. Come and join us to make good products even better – we’d love to hear from you! About the role Background and details: You will be field based (Northwest) as part of our on-site presence, reporting into our Redditch Depot. You will be required to maintain and service Komatsu plant machinery whilst always maintaining safe working practices. In addition, ensuring that you provide our customers the best levels of service, through regular communication with both the customer and service office to update on progress throughout the set activity. Reporting to the Service Supervisor, this role is ideal for someone who is experienced with heavy plant and has great customer service skills. Duties and responsibilities: Attending customer’s sites to perform pre-planned preventative maintenance that includes but not limited to: Completing accurate and timely maintenance including Field Campaigns & KDPF replacement Completing the specified documentation (RAMS, Job sheets etc) Carry out a Walk Around Inspection post service on the unit to ensure the unit is operating to expected performance levels Identifying any parts required to carry out any additional work from Walk Around Inspection Keep the customer and your supervisor up to date on your estimated time of arrival following the receipt of the job instructions. Ensuring you register your arrival on site and undertake any site inductions as per the customer’s specific site requirements. Complete a dynamic site-specific risk assessment and method statement prior to commencing any work in line with company and site procedures. Complete all works to plan as agreed with the customer and the service office. Complete all job specific documentation relating to a standard service and campaign. Experience and Qualifications: Experience of working with Heavy plant and machinery Experience of working on customers sites H&S training carried out in PPE awareness and hand tools Experience of delivering excellent customer service Full driving licence Use of field-based maintenance tools and equipment Good communication skills Ability to problem solve and work under pressure Ability to work independently and on own initiative NVQ level 2 in plant maintenance or equivalent SPA and/or CSCS training - desirable IOSH training (H&S) - desirable IPAF training (MEWP, Harness & Telehandler) - desirable What we can offer you Competitive Salary Up to 27 days holiday linked to service, plus bank holidays and Christmas shutdown Employee Assistance Programme Pension Scheme Career development/progression Death in service benefit Company van

Role: Quantity Surveyor Salary: £40-45k (Depending on Experience) Location: Bolton – on site working Hours/Days per week: 37hs per week – Mon – Fri, typically Mon – Thurs 8-5 then Friday 8-12 with a 45 mins lunch Job Description: To manage all commercial aspects of projects, from assisting the tendering process to the settlement of accounts and seek to minimise costs and enhance value, while still achieving the required standards and quality. Responsibilities & Duties: • Undertake programme monitoring to ensure identification of delays and entitlement to time, • Administer effective potential and actual contract change control ensuring timely submission of correct notices and prompt agreement/implementation with client and subcontractors, • Build positive relationships with subcontractors and ensure subcontracts are properly let. Ensure financial and contractual control of subcontractor’s accounts in accordance with legislation and corporate procedures, • Develop proactive and appropriate relationships with both internal and external stakeholders; to provide the appropriate guidance to make good business decisions, • Work with Project Managers to support the efficient and effective execution of projects ensuring contractual arrangements for cost, quality and delivery are achieved, • Ensure all commercial activities are in line with the Commercial Strategy and meet all operational, financial, commercial, legislative standards and targets, • To attend contract handover meetings, start up meetings, progress meetings and contract review meetings as necessary, • Provide support to Sales and Estimating for all commercial activities, • To ensure that Contracts are set up according to Project and Company requirements including the use of WBS codes were relevant and that all associated paperwork and accurate records are collated and filed appropriately, • Ensure that any potential issues are raised with the relevant personnel at the earliest opportunity, • Responsible for open and adequate communication with peers, line management, senior management, project delivery teams and with clients as necessary, • To undertake the administration of the sub-contracts to ensure that the Sales contracts are appropriately supported, • Contributing positively to the effectiveness of project team commercial performance to include priming project managers and their teams on key risks/opportunities in customer contracts, effectively participating as necessary in validation of projects won and interrogating and reporting periodic reviews of lessons learnt, • Preparation and submission of Interim application for payment, analysing payment notices and monitoring cash receipts. Progress recovery of outstanding debts and resolution of financial exceptions, • Maintain contract documentation e.g. applications for payment, quotations, variations, notifications and ensure such is provided in accordance with the terms and conditions of contracts, • Monitor and control income and expenditure on contracts e.g. interim/final applications for payment/final accounts/payments for late monies etc. liaising where necessary with the relevant people e.g. clients, Project Managers, senior management etc., • Produce relevant monthly reports for the Commercial Manager e.g. cost and value reports, cashflow forecasts, cost to completes, turnover forecasts, WIP reports, risk and opportunity registers, earned value analysis etc. ensuring information is complete and accurate, • Support Project Managers by presenting commercial position at monthly CVR meetings., • Maintain compliance of contracts in accordance with corporate procedures, • Any other ad hoc duties as may be required, and as commensurate with the grade of post. Qualifications, Knowledge, Experience & Skills: Essential • Candidates to have a minimum of 5 years’ experience from a main contracting or project delivery background, • HND/degree (or equivalent) in Quantity Surveying, • Previous experience of commercial management and procurement of subcontractors, including chairing regular meetings, measurement and control cycle, certificates and accruals calculations, • Good contractual and commercial understanding of JCT/NEC/ICHEME forms of contract and knowledge and understanding of Construction Law, • Ability to demonstrate a good knowledge of monthly reporting and earned value analysis, • Have knowledge and experience in estimation and cost analysis, • Excellent communication, numeric and computer literacy skills, proficient in Microsoft Office, • Excellent organisation and time management skills, with the ability to work under pressure and to tight deadlines, • Ability to work effectively in a team and delegate, but also able to work on own initiative and build relationships with clients’ surveyor, • Wide exposure to applications, claims process, placing sub-contracts, negotiation of contracts and agreeing final accounts., • Be a problem solver/critical thinker with good attention to detail and good negotiation skills, • Takes ownership and accountability and demonstrates a professional approach to self and others **You must have the full right to work in the UK without the need for sponsorshop both now, and in the future

ASSISTANT BUYER | WIGAN | PERMANENT, FULL TIME | UP TO £30,000 DOE Monday to Friday 8am to 5pm – fully office based KPI Recruiting is proud to represent our long-standing client based in the Wigan area, who are seeking an experienced Assistant Buyer to join the team on a full time, permanent basis. You will be: Liaising with internal teams to coordinate material and plant requirements Communicating with new and existing suppliers to procure materials and plant at best quality and price Ensuring purchasing budgets are adhered to Tracking and following up lead times with suppliers to ensure materials and plant arrive on time Liaising with accounts department; signing off / querying invoices when required Coordinating hire and off hire of plant, and maintaining own plant register ensuring fit for purpose Assisting with management of stock control, disposing of surplus stock and providing stock take information for finance department Assisting with unloading and loading vehicles, and supporting of keeping warehouse and yard in safe, functional condition You will have: Minimum of two years working in a procurement / buying capacity Experience in the procurement of materials, plant and skip hire, whilst managing subsequent documentation is essential Strong communication with the ability to effectively build and maintain relationships with internal and external stakeholders Excellent attention to detail Benefits include; 23 days holiday plus bank holidays, company pension scheme, free onsite parking, company social events, progression opportunities and more… APPLY NOW! Contact the Commercial Team on (phone number removed) Please note that due to the high volume of applications we receive, only those successfully shortlisted for the role will be personally contacted INDCOM

World Class Defence Organisation is currently looking to recruit a Electronics Design Engineer / Test Design Support Engineer subcontractor on an initial 6 month contract. This role would suit a candidate who comes from an Electronics Design Engineer, Electronics Engineer, Production Support Engineer or Test Systems Designer background. Rate: £65.00 per hour Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally). Compressed week of working Monday to Thursday is available. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Interview Process: One stage Video Interview Test Design Support Engineer Job Description: The department have an excellent opportunity for experienced Electronic Design Engineers to play a leading role in the support of production activities at their state of the art manufacturing facilities. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. You will act as the interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. Whilst the primary aim is focused on highly advanced module missile programmes and subsystems, there is also scope to work on other unique opportunities including support to launcher assemblies. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Skillset/experience required: To be suitable for this role, Individuals will be able to demonstrate a number of the following attributes: Degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Proven experience in the design of one or more of the following disciplines: Digital and Analogue electronics Power Electronics RF & Antenna Interconnects Safety Electronics Test Systems Schematic design PCB Design Adherence to BS EN Standards Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. You’ll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. Manage discreet work packages preparing bids, controlling costs and delivering solutions. Experience in supporting manufacturing and resolving manufacturing issues is an advantage, but not essential. Investigative skills to be able to find Root Causes of design related issues and propose robust Corrective Actions

Quantity Surveyor Bolton Competitive Salary Overview We are currently seeking an experienced Quantity Surveyor to join our clients growing commercial team supporting the successful delivery of complex engineering and construction projects. This role will see you manage the full commercial lifecycle of projects, from tender support through to final account settlement. You will play a key role in protecting commercial performance, managing contractual obligations, and maximising project value while ensuring quality and compliance standards are met. Working closely with Project Managers, subcontractors, and clients, you will be a vital part of ensuring projects are delivered on time, within budget, and in line with contractual requirements. This role offers an excellent opportunity for a commercially driven Quantity Surveyor to play a key role in delivering high-value projects while developing their career within a collaborative and forward-thinking environment. Key Responsibilities: Manage all commercial aspects of projects from tender stage through to final account settlement Monitor project programmes to identify delays and ensure entitlement to time and contractual protections Administer contract variations and change control, ensuring timely notices and agreements with clients and subcontractors Maintain full contract documentation including payment applications, variations, notices, and quotations Prepare and submit interim applications for payment Analyse payment notices and monitor cash receipts Manage cost control, income, and expenditure across projects Support recovery of outstanding payments and resolution of financial exceptions Produce monthly commercial reports including: Cost Value Reconciliation (CVR), Cashflow forecasts, Cost-to-complete analysis, Work in Progress (WIP), Risk and opportunity registers and Earned value analysis Work closely with Project Managers to support the successful commercial delivery of projects Attend contract handover, progress, and review meetings Present commercial updates during monthly CVR meetings Develop strong relationships with clients, subcontractors, and internal stakeholders Subcontractor & Procurement Management Support the procurement and management of subcontractors Ensure subcontracts are correctly let and commercially controlled Manage subcontractor accounts including measurement cycles, certificates, and accruals Ensure compliance with contractual terms and legislative requirements Ensure commercial activities align with the overall commercial strategy Maintain accurate project records, WBS structures, and documentation Identify and escalate potential risks or issues early Contribute to lessons learned and commercial improvement initiatives Essential Requirements: Minimum 5 years’ experience within a main contractor or project delivery environment HND or Degree in Quantity Surveying (or equivalent) Strong commercial understanding of JCT, NEC, or IChemE contracts Experience managing subcontract procurement and commercial performance Proven experience with: Interim applications and payment processes Contract variations and claims Final account negotiation Strong understanding of earned value analysis and monthly commercial reporting Excellent numerical, analytical, and negotiation skills High level of organisation and time management, able to meet tight deadlines Proficient in Microsoft Office Ability to work both independently and collaboratively within project teams Desirable: Membership of Royal Institution of Chartered Surveyors (RICS) or working towards chartership CSCS Card Strong ability to build productive relationships across stakeholder groups Results-driven, proactive approach to commercial management Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

World Class Defence Organisation is currently looking to recruit a SAP Security Support Administrator Subcontractor on an initial 12 month contract. The role can be based from either the companies Stevenage or Bolton site, depending on your preference. The role will be predominantly working from home. Rate: £22.63ph (Umbrella) Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage or Bolton depending on your preference Hybrid / Remote working: The role will be predominantly working from home… one day per week onsite. Also, a condensed 4 day working week of Monday to Thursday is OK too. Duration: 12 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) SAP Security Support Administrator Job Description: The SAP Security Support Administrator plays a key role in supporting documentation, refinement and execution of General IT Controls (GITCs) across SAP applications. The role supports compliance, audit readiness, and secure access management within SAP Systems. Key Responsibilities: Follow and maintain documented procedures supporting SAP General IT Controls Identify gaps in existing procedures and contribute to the development of improved controls documentation Support the extraction, analysis and manipulation of SAP data to evidence application controls. Perform and support User Access Reviews (UAR) and Segregation of Duties (SoD) Support internal and external audit requests Support ongoing improvement to SAP Security processes and reporting Skillset/experience required: Able to act independently with guidance and achieve the desired documented outcomes Strong attention to detail and a structured approach to controls execution Proven experience running regular SAP security-related transactions, including UAR and SOD Experience in SAP user administration and access management Strong knowledge of MS Excel and Office applications Experience supporting software user administration and reporting Ideally have experience of IT Control Framework, explicitly control activities such as; access controls and change management controls

Looking for more control over your schedule? Join Progressive Cares growing team of bank staff across the South Yorkshire ! Enjoy flexible shifts that fit around your life not the other way around. If youre ready for a role that works for you, wed love to hear from you. As a national leader in Social Care for over 25 years, we are committed to innovation, excellence, and making a real impact. Our nurturing and empowering culture allows us to deliver exceptional services through our highly skilled, committed, and multi-disciplinary teams. We offer a range of services, including: Family Assessment Childrens Residential 16+ Supported Living Learning Disabilities All of our services are designed to provide safety, growth, and independence for individuals and families. Our Mission At Progressive Care, our brand stands for trust, quality, and care. Every service we provide is thoughtfully designed to deliver excellence, consistency, and a meaningful impact. With a professional and person-centered approach, we ensure reliability and progress, creating lasting value for those we care and support. Your Role as a BANK Support Worker within Family Assessment: Conduct assessments to help families develop and maintain a safe and nurturing environment. Safeguard children and parents through continuous assessment and planning. Build trusting relationships with families, offering ongoing guidance and encouragement. Support parents to reach their full potential, enabling them to provide care that meets a "good enough standard". Deliver daily support, offer crisis management, and assist in the development of parenting skills. Mentor and advise parents to help them build long-term stability and resilience. Monitor and observe parent-child interactions, contributing to healthy attachment and child development. Engage in activities that strengthen family bonds and promote positive behaviour. Maintain clear, comprehensive written records of observations, family goals, and documentation. Advocate for families by working with community resources and professional services. Operate effectively in a fast-paced, dynamic environment with a high level of emotional awareness. Handle challenges with resilience, adaptability, and a child-focused approach. Our Ideal Candidate should: Level 3 Children & Young Peoples Workforce Diploma is desirable, but not essentialfull training provided Experience working with families in a residential or supported environment A genuine desire to help and support others, with a commitment to a career in supporting families. Strong communication skills, both verbal and written, with good literacy skills. Patient and empathetic towards the complex issues and challenges families may face. Prioritises the safety and well-being of children. Nurturing and supportive, with effective mentoring skills. Experienced in safeguarding and creating a safe, stable environment. Self-motivated, able to work well under pressure, and adaptable to changing circumstances. Able to apply transferable skills from relevant life or professional experience. Strong interpersonal skills and the ability to build positive relationships with children, parents, and professionals. Always acts in a professional manner, and stays calm under pressure. What We Offer: Excellent Pay & Rewards We recognise your skills with structured Salary Grades that reflect your Experience and Qualications Our Pay Structures are at the forefront of National Pay Standards. Career Progression & Development Excellent Opportunities for career progression pathways creating opportunities from; Support worker Senior Support Worker Team Leader Deputy Manager Registered Manager Service Manager Comprehensive Training & Qualifications Full induction program before you start. Service specific training to refine and enhance your skills. We fully fund your training and qualifications through our Nationally Accredited Training Centre. Wellbeing Program Access to excellent employee benefits designed to support your health, wellbeing, and personal development. A Supportive & Rewarding Work Environment With strong management support and supervision, you will always have the guidance, encouragement, that give you the tools and confidence that you need to thrive in your role and career. Are you Ready to Start Your Career in Social Care? Speak to our Talent Team and join the Progressive Care Community! Due to the nature of this role, Progressive Care conducts enhanced background checks through the Disclosure & Barring Service (DBS) for all hired personnel. Please note that sponsorship is not available for this position, and all applicants must have the right to work in the UK. TPBN1_UKTJ

This role is responsible for ensuring products and services meet defined quality and performance standards across all business activities. The Quality Controller ensures that quality processes, inspection plans and project documentation are consistently followed, supporting on-time delivery, compliance, traceability and continuous improvement throughout the supply chain and manufacturing lifecycle. Who This Role Would Suit This position would suit a detail-oriented Quality professional with experience in manufacturing or fabrication environments. It is ideal for someone who enjoys hands-on inspection work, problem-solving and collaboration, and who takes pride in maintaining high standards, compliance and continuous improvement across complex projects. Key Responsibilities Carry out dimensional, visual and functional inspections on incoming, in-process and finished components Identify, document and manage non-conformances, supporting root cause investigations and corrective actions Ensure full traceability of components, certification and quality records across all stages of manufacture Support continuous improvement activities, lessons learned and quality planning Liaise with suppliers, internal teams and client inspection representatives to verify quality complianceRequirements: Proven experience in Quality role within Manufacturing. Experience with QC inspections/measurements, using CMM, micrometres, verniers, etc. Experience investigating and closing out NCRs. Willingness to visit supplier to inspect components. FLT and Overhead crane licences highly desirable. Location: Bolton Permanent, Full Time - 4-day week. Working Hours: Monday-Thursday, 37 hours per week. Salary: £35k - £45k Benefits: 25 days Holidays* + Bank Holidays Service days Sick pay Pension - 5% EE / 5% ER (combined 10% or above) Professional memberships Life Assurance Healthcare package Occupational Health Free Eye Tests Mental Health Support Bonus Scheme APPLY NOW and feel free to contact Jacob at (phone number removed) or via email at (url removed)

Paralegal - Litigation Department | Bolton | Full-Time Are you looking to build your career in litigation within a supportive and experienced legal team? We are currently seeking motivated Paralegals to join our busy Litigation department at our Bolton office. This is an excellent opportunity for someone who is eager to gain hands-on litigation experience across a diverse range of civil matters, working closely with experienced lawyers and receiving dedicated one-to-one training from senior colleagues. The Role You will become part of a collaborative and fast-paced team, assist qualified lawyers and supporting cases across a broad spectrum of civil litigation. Our firm handles a wide variety of work including: Personal Injury Clinical Negligence Commercial Litigation Contentious Probate General Civil Litigation matters While prior experience in these areas is beneficial, it is not essential. We are keen to hear from candidates who demonstrate the right attitude, enthusiasm and willingness to learn, as full training and mentorship will be provided. What You'll Be Doing Supporting solicitors and fee earners on a range of litigation matters Assisting with case preparation, legal research, and documentation Liaising with clients and third parties Helping to manage case files and maintain accurate records Working collaboratively with the wider litigation team What We're Looking For We are seeking candidates who can demonstrate: A keen interest in litigation and dispute resolution A friendly, enthusiastic, and proactive attitude Strong attention to detail Analytical thinking and problem-solving skills Excellent organisation and time management Confident communication and people skills The ability to work flexibly, meet deadlines and achieve results Why Join Us? Work alongside experienced litigation professionals Receive one-to-one mentoring and training Gain exposure to a broad range of litigation work Be part of a supportive and collaborative team environment If you are looking to develop your litigation career and gain valuable experience across multiple areas of civil law, we would love to hear from you. To apply please send an updated CV to or call Chris on (phone number removed) to discuss the role further

Safety, Health, Environmental & Quality (SHEQ) Advisor - Construction £40,000-£48,000 + Package - Wigan Your new company This is an exciting opportunity to join a well-established principal contractor operating across the North West. The business delivers high-quality construction, housing, and refurbishment projects, maintaining a strong focus on safety, compliance, and sustainability. With a supportive and collaborative working environment, it values employee development and wellbeing while maintaining a reputation for delivering excellent projects on time and to the highest standards. Your new role Our client is seeking an experienced SHEQ Advisor to provide expert guidance and support across all projects and teams. Reporting to the SHEQ Manager, you will play a key role in promoting a strong safety culture, conducting audits, managing SHEQ compliance, and driving continuous improvement. You will work closely with site teams, subcontractors, and stakeholders to ensure that projects are delivered safely, efficiently, and to regulatory standards. Responsibilities will include: Promoting a proactive SHEQ and compliance culture across all business operations Ensuring all project activities comply with UK Health & Safety legislation, ISO 9001, ISO 14001, ISO 45001, and SSIP accreditations Developing and maintaining Construction Phase Plans and all associated site documentation Conducting regular site inspections, audits, and risk assessments to ensure safe working practices Leading and supporting investigations into incidents, near misses, and non-conformances, implementing corrective actions Delivering toolbox talks, site briefings, and SHEQ training for operatives and subcontractors Maintaining the company's Quality Management System and compliance documentation Collating and reporting on SHEQ incidents and accidents across all sites Conducting Health & Safety inductions for new starters Monitoring environmental performance, waste management, and sustainability initiatives Managing SHEQ databases and producing timely reports for senior management Completing annual SSIP accreditation reassessments, including CHAS, Constructionline, SafeContractor Supporting Bid/Pre-Construction teams with tender and service agreement evaluations Identifying opportunities to improve SHEQ performance and promote best practices across projects Keeping up to date with SHEQ legislation, standards, and industry best practices Engaging proactively with internal and external stakeholders to maintain positive working relationships Role modelling company behaviours, culture, and ways of working to ensure excellence in delivery What you will need to succeed: NEBOSH Certificate (essential) IOSH membership and/or an environmental qualification (IEMA or equivalent) desirable 3-5 years' experience in SHEQ, ideally within construction or social housing Ability to conduct external site audits and review accident statistics Knowledge of ISO 45001, ISO 14001, and ISO 9001 standards Excellent communication and problem-solving skills Ability to work independently and collaboratively under pressure Hands-on, proactive approach to SHEQ management What you get in return: This is a fantastic opportunity to join a supportive, forward-thinking construction business. In return for your expertise, you will receive: A competitive salary of £40,000-£48,000 plus a comprehensive benefits package Opportunities for professional development and career progression Exposure to varied and high-profile construction and housing projects A culture that prioritises safety, sustainability, and employee wellbeing A collaborative and inclusive working environment where your input and expertise are valued Apply today if you are a motivated SHEQ professional looking to advance your career in a respected regional construction business. Apply: If you're interested in this opportunity, then please get in touch today with our Commercial Specialist, Mark Harris. Building Careers UK specialises in Construction and Property recruitment and serves as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the Terms and Conditions, Privacy Policy, and Disclaimers which can be found on our website. We welcome applications from individuals of all backgrounds, experiences, and identities. Our recruitment process is designed to ensure equal opportunities for all candidates, regardless of age, gender, race, ethnicity, religion, disability, sexual orientation, or any other characteristic. Please Note: Due to high volume of applicants, only those shortlisted will be contacted. INDCOM

Internal Sales Executive / Sales Engineer / Technical Sales Support Engineer to join a global leading engineering manufacturer. The successful Internal Sales Executive / Sales Engineer / Technical Sales Support Engineer will provide technical sales support, prepare proposals, quotations, and handle orders for a wide range of hydraulic and pneumatic products and fluid power components, liaising with customers daily plus various engineering departments. The Internal Sales Executive / Sales Engineer / Technical Sales Support Engineer will ideally come from any sales, technical support, customer service or technical background associated within mechanical engineering. Full training is being provided, however having previously sold an engineering product, spare parts or a background working in hydraulics or similar fluid power environment is beneficial. Package: £32,000 - £42,000 depending on experience Bonus scheme 25 days holiday + bank holidays Pension scheme Additional benefitsInternal Sales Executive / Sales Engineer / Technical Sales Support Engineer Role: Provide technical advice on the selection of a wide range of hydraulic and pneumatic products and fluid power components. Generate and provide accurate quotations and proposals for hydraulic / fluid power equipment based on customer requirements. Perform contractual review and preparation of formal quotations to meet customer specifications. Offer technical sales support across the team, providing assistance to other Sales Engineers and supporting customer service functions, including order processing, expediting, and documentation. Advise customers on hydraulic systems and components, ensuring the best solutions are provided for their needs. Work closely with various engineering departments office based near SkelmersdaleInternal Sales Executive / Sales Engineer / Technical Sales Support Engineer Requirements: Previous experience as an Internal Sales Engineer, Internal Sales Executive, Technical Advisor, Technical Sales Support, Technical Sales Engineer, Account Manager, or similar within the mechanical engineering sector. Technical aptitude or a clear understanding of hydraulic and pneumatic components (full product training provided). Hydraulic Engineers who are looking to transition from fieldwork are also encouraged to apply. A technical mechanical engineering qualification such as an apprenticeship, HNC, HND, or degree is advantageous. Familiarity with ERP systems, such as SAP, is a plus. Must be commutable to the office near Skelmersdale