Trabajos process operator en BoltonCrear alertas

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit 4x Development and Production Test Engineer - Electronics/Electrical subcontractors on an initial 12 month contract. • Looking for somebody with substantial test engineering experience., • Diagnosis of test failures, • Testing experience down to component level, • The department are keen to hear from candidates from a background with Electronics, RF, Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills.Hourly Rate: £37.00ph (Umbrella). Contract Duration: 12 Months (initially and then ongoing and long-term thereafter)Development and Production Test Engineer – Electronic / Electrical Job Description:Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level., • Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations., • Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions., • Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level., • Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme., • Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements., • Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action.Role requirements (skills, training and qualifications):, • HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test., • A good understanding of measurement and test principles, and associated test equipment., • An understanding of the typical CADMID product lifecycle for test equipment is desirable., • An understanding of RF and microwave technology at subsystem level would be an advantage., • An understanding of Environmental testing (including ESS) would also be an advantage.

Automation Engineer Bolton, UK Days £52,000 + Bonus Join a world-class automotive supplier at the forefront of advanced manufacturing, delivering innovative components and systems to major OEMs worldwide. We are seeking a talented and experienced Automation Engineer to drive the next phase of our production excellence in our Bolton facility. In this pivotal role, you will leverage your strong background in PLC programming, process automation, and production engineering to design, implement, and continuously enhance automated systems that boost efficiency, quality, and output in a high-volume manufacturing environment. Responsibilities - Automation Engineer • Design and implement automated processes to optimise production efficiency and throughput, • Analyse existing production processes to identify and apply the most effective automation technologies, • Diagnose and resolve faults in automated production processes and equipment swiftly and effectively, • Manage project budgets, spare parts, and associated expenses, • Partner with Production Engineering and Maintenance teams to implement automated processes and ensure smooth, stable handover to production operations, • Drive continuous development and improvement of production systems, processes, and machine performance, • Lead and support process improvements through structured improvement plans, • Propose and implement efficiency enhancements for machines and production processes, • Monitor performance and task Production Engineers with targeted improvements on the production line, • Plan optimal process flows and operator work methods to maximise output without compromising quality, • Set clear targets for project activities and rigorously track benefits and outcomes Experience & Qualifications - Automation Engineer • Advanced PLC Programming and Fault-Finding expertise (Allen Bradley, Siemens, Keyence, etc.) – ideally qualified to EAL / City & Guilds level or equivalent, • Proven track record in implementing and maintaining PLC systems and automated production processes in a manufacturing setting, • Solid knowledge of robotics, pneumatics, and mechanical systems commonly used in production environments, • Strong logical approach to problem solving and root cause corrective action (RCCA), • Familiarity with formal problem-solving methodologies (e.g., SGA, DMAIC, 7-step, PDCA, 5 Why, Fishbone Diagram) Benefits - Automation Engineer • Discretionary annual Bonus 7.5%, • up to 5.5% employer contribution, • EV Scheme: through salary sacrifice and free charging at site, • Medical Insurance, • Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on 01453 796617, or send a copy of your CV to For details of other opportunities available within your chosen field, please visit ___ Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, PLC Engineer, Electrical Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer

CMM Operator – Quality Inspector (Night Shift)\n\nA skilled CMM Operator / Quality Inspector is responsible for verifying that manufactured components meet required engineering drawings, specifications, and quality standards. This role supports production by performing accurate inspections, maintaining quality documentation, and ensuring compliance with safety, environmental, and regulatory requirements.\nKey Responsibilities\n * \n Carry out all duties in accordance with Health & Safety, Environmental, and Quality procedures, maintaining a safe and organised 5S work area.\n * \n Provide support and communication between quality, engineering, and production teams to resolve inspection or quality-related issues.\n * \n Work to inspection priorities to support production schedules and customer delivery requirements.\n * \n Perform first-off, in-process, subcontract, and final inspections using appropriate inspection techniques including:\n * \n Operate existing CMM inspection programs using appropriate software to verify that components meet drawing requirements, GD&T specifications, and customer standards.\n * \n Ensure correct datums, alignments, probing routines, and measurement sequences are used during inspection to achieve consistent and repeatable measurement results.\n * \n Confirm that drawings, CAD models, specifications, batch documentation, SOPs, and inspection program revisions match before starting inspections.\n * \n Validate CMM inspection results during first-off and first-article inspections, checking results against manual measurement methods where necessary.\n * \n Support the improvement and optimisation of inspection programs by providing feedback to engineering or programming teams to improve repeatability and efficiency.\n * \n Participate in quality investigations, continuous improvement activities, and risk assessment processes such as DFMEA, PFMEA, and APQP when required.\n * \n Assist with Measurement System Analysis (MSA) activities to verify inspection accuracy and reliability.\n * \n Ensure inspected products are free from Foreign Object Debris (FOD) and Foreign Object Damage, in accordance with FOD prevention procedures.\n * \n Review and interpret inspection results, identifying out-of-tolerance conditions, trends, or potential process concerns and reporting them to the appropriate departments.\n * \n Verify that inspection equipment, including CMM machines, is calibrated and suitable for use before conducting measurements.\n * \n Complete inspection documentation including batch cards, inspection reports, and quality records accurately and within required timescales.\n * \n Ensure concessions, deviation reports, and non-conformance procedures (NCR) are followed when required.\n * \n Confirm correct material traceability, ensuring approved materials and components are used and recorded correctly.\n * \n Verify that part identification markings are clear and compliant with drawing or specification requirements.\n * \n Raise Deviation Reports and Non-Conformance Reports when inspection results do not meet requirements and support follow-up investigations.\n * \n Hold and apply authorised inspection approval stamps where applicable.\n * \n Support and assist other inspectors with CMM operation and interpretation of inspection results.\n * \n Provide clear shift handovers, communicating any relevant quality issues or ongoing inspections.\n * \n Maintain professional working relationships and promote high quality standards within the inspection team.\nExperience and Skills\n * \n Previous experience working in a quality inspection or manufacturing inspection environment.\n * \n Experience operating Coordinate Measuring Machines (CMM) and interpreting measurement results.\n * \n Ability to read and interpret engineering drawings and GD&T requirements.\n * \n Strong analytical skills with the ability to identify trends, defects, or measurement discrepancies.\n * \n Knowledge of common inspection tools, techniques, and quality documentation systems.\n * \n High level of attention to detail and organisational skills.\n * \n Ability to work independently as well as part of a team, supporting quality and production objectives

My client is looking for several Electrical Test Operators to join them on an initial 12-month basis. As the Electrical Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives.\n\nRole: Electrical Test Operator\n Pay: £28.35 per hour via Umbrella (rising to £29.70)\n Location: Bolton\n Contract: 12 Months (possible extension)\n Hours: Monday - Friday, 37 hours per week\n Security Clearance: Security Clearance required however can start on BPSS\n\nResponsibilities: \n\nCertify the product in line with the product certification procedure.\nMaintain product certification and approval via regular audits.\nPossess a versatile skill base with the capability to apply these skills across a range of tasks.\nBe fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle.\nEnsure manufacturing build, inspection and where relevant, test times are met.\nCheck and complete all paperwork associated with the manufacturing data pack.\nMaintain to the highest level, workmanship standards and product quality.\nEnsure compliance with all associated procedures applicable to the manufacturing process.\nMaintain a safe working environment.\nMaintain a good housekeeping policy.\nCommunicate best practice to other team members.Skillset/experience required:\n\nThe successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable.\nFormal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21/ONC. Formal further education certificate to HNC or equivalent certificate.\nSignifiacnt electrical test experince\nNo colour blindness.If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation\n Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. \n "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Electrical Calibration Operator\n\n12-Month Contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nApprenticeship required - Electrical/Electronic\n\nDo you hold an Electrical/Electronic Apprenticeship?\n\nDo you have experience conducting calibrations on instruments?\n\nDo you want to work with an industry-leading company?\n\nIf the answer is yes to these, then this role could be for you.\n\nYou will be working as the Electrical Calibration Operator with a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry.\n\nYou will be a key member of the Manufacturing function within the business where you will be tasked to carry out routine calibration of Special To Type Test Equipment (STTE) and Commercial Off The Shelf (COTS) equipment. This role will not be working with products so it is not essential you have experience with products, rather Test and process equipment experience is ideal.\n\nFor this role, you will be required to hold an approved apprenticeship relating to Electrical/Electronic Engineering to NVQ Level 3/TR23/TR21.\n\nYour responsibilities will involve:\n\nWorking in a multi-disciplined team to support the Operations team.\nInitial calibration, routine calibration, and maintenance of test and measurement equipment.\nEnsure that both factory and proprietary test and measuring equipment are maintained in line with current procedures.\nCarry out calibration and repair tasks in accordance with departmental processes and procedures.\nGenerating clear and comprehensive calibration/maintenance records for traceability purposes.The skillset/experience you may have includes:\n\nGenerate clear and comprehensive calibration & maintenance records.\nExperience in calibrating COTS/Special to Type Test Equipment\nExperience in calibrating electrical equipment such as Power Supplies, Multimeters, Oscilloscopes, Function Generators, etc.\nExperience in In-service Inspection and Testing of Electrical Equipment\nBe competent in following the manufacturer's instructions.\nA good understanding of SAP would be desirable.\nTime served apprenticeship/modern apprenticeship or NVQ Level 3\nCity & Guilds part 2 & 3/ONC/HNC in Electronics\nExperience working on Environmental Stress Screening Facilities (ESS) \n\nIf this sounds like an opportunity you want to be involved in and could see yourself growing in, then simply apply and we can discuss further! \n\nElectrical Calibration Operator\n\n12-Month Contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nApprenticeship required - Electrical/Electronic\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Ability to learn and grow in a fast paced environmentPreferred Qualifications:* Computer literate (including Microsoft Word, Outlook, and Excel) and the ability to use the Company's bespoke internal IT systems# What We Offer:At Momentive, we value your well-being and offer competitive total

Monday to Friday: 08:00 – 16:00.Flexibility required: 06:00 – 18:00 when needed.Saturday: 07:00 – 11:00 (as required).We are looking for a dependable and proactive Yard Operative to join our team in Heywood.This is a physically active role working outdoors in all weather conditions.A valid Cou

A manufacturing company in Bolton is offering a Process Operator Apprentice position.

CMM Operator Quality Inspector (Night Shift) A skilled CMM Operator / Quality Inspector is responsible for verifying that manufactured components meet required engineering drawings, specifications, and quality standards. This role supports production by performing accurate inspections, maintaining quality documentation, and ensuring compliance with safety, environmental, and regulatory requirements. Key Responsibilities Carry out all duties in accordance with Health & Safety, Environmental, and Quality procedures, maintaining a safe and organised 5S work area. Provide support and communication between quality, engineering, and production teams to resolve inspection or quality-related issues. Work to inspection priorities to support production schedules and customer delivery requirements. Perform first-off, in-process, subcontract, and final inspections using appropriate inspection techniques including: Operate existing CMM inspection programs using appropriate software to verify that components meet drawing requirements, GD&T specifications, and customer standards. Ensure correct datums, alignments, probing routines, and measurement sequences are used during inspection to achieve consistent and repeatable measurement results. Confirm that drawings, CAD models, specifications, batch documentation, SOPs, and inspection program revisions match before starting inspections. Validate CMM inspection results during first-off and first-article inspections, checking results against manual measurement methods where necessary. Support the improvement and optimisation of inspection programs by providing feedback to engineering or programming teams to improve repeatability and efficiency. Participate in quality investigations, continuous improvement activities, and risk assessment processes such as DFMEA, PFMEA, and APQP when required. Assist with Measurement System Analysis (MSA) activities to verify inspection accuracy and reliability. Ensure inspected products are free from Foreign Object Debris (FOD) and Foreign Object Damage, in accordance with FOD prevention procedures. Review and interpret inspection results, identifying out-of-tolerance conditions, trends, or potential process concerns and reporting them to the appropriate departments. Verify that inspection equipment, including CMM machines, is calibrated and suitable for use before conducting measurements. Complete inspection documentation including batch cards, inspection reports, and quality records accurately and within required timescales. Ensure concessions, deviation reports, and non-conformance procedures (NCR) are followed when required. Confirm correct material traceability, ensuring approved materials and components are used and recorded correctly. Verify that part identification markings are clear and compliant with drawing or specification requirements. Raise Deviation Reports and Non-Conformance Reports when inspection results do not meet requirements and support follow-up investigations. Hold and apply authorised inspection approval stamps where applicable. Support and assist other inspectors with CMM operation and interpretation of inspection results. Provide clear shift handovers, communicating any relevant quality issues or ongoing inspections. Maintain professional working relationships and promote high quality standards within the inspection team. Experience and Skills Previous experience working in a quality inspection or manufacturing inspection environment. Experience operating Coordinate Measuring Machines (CMM) and interpreting measurement results. Ability to read and interpret engineering drawings and GD&T requirements. Strong analytical skills with the ability to identify trends, defects, or measurement discrepancies. Knowledge of common inspection tools, techniques, and quality documentation systems. High level of attention to detail and organisational skills. Ability to work independently as well as part of a team, supporting quality and production objectives. TPBN1_UKTJ

This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum Qualification Level Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Punch Press Operator – £14.50 per hour – Days A long-established CNC manufacturing company—specialising in laser cutting, perforating, and sheet metal fabrication—is seeking an experienced Punch Press Operator to join its skilled production team. With over six decades of success built on service, quality, and dependability, this is an excellent opportunity to join a stable and forward-thinking engineering environment. What You’ll Be Doing Operating Amada CNC turret punch machines to manufacture high-quality sheet metal components Setting, tooling, and running punch press machinery efficiently Reading and interpreting technical drawings and job specifications Carrying out first-off and in-process quality checks Ensuring accuracy and consistency throughout production runs Working collaboratively with the production team to meet production targets Supporting other fabrication processes when required What We Offer £14.50-£15 per hour depending on experience 38 hours per week (days) 8am-4:30pm Overtime available A modern workshop equipped with the latest CNC machinery, including laser cutters, turret punch presses, press brakes, and guillotines A stable position within a growing and highly reputable manufacturing business What We’re Looking For In a Punch Press Operator Previous experience operating Turret punch machines, Amanda beneficial but not essential Ability to read and work from technical drawings Strong attention to detail and commitment to quality Reliable, positive attitude with a strong work ethic Ability to work independently and as part of a team If you’re an experienced Punch Press Operator looking for a secure role within a well-equipped and established manufacturing environment, we’d love to hear from you. Apply now! INDLIV

An exciting opportunity for an experienced Manufacturing Test Engineer to join our Circuit card assembly Engineering team. This is a fast-paced but friendly and inclusive Manufacturing environment that will challenge you Salary: Circa £45,500 depending on experience Dynamic (hybrid) working: 4 or 5 days per week on-site due to workload classification Security Clearance: British National Only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As part of our continued growth, we are looking for a highly skilled and methodical Electronics Manufacturing Test Engineer to join our Circuit Card Assembly team. In this critical role, you will specialise in diagnosing faults on PCB assemblies down to component level. Your expertise will be crucial in accurately identifying root causes of failure, providing technical reports and supporting the implementation of corrective actions, which in turn will be utilised to improve production yield and ensure programme targets are achieved. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to time served experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. Key Responsibilities: Technical Root Cause Analysis:Performing fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc. Test Specification/Instruction Generation:Supporting the introduction of new test facilities by generating test specifications, operator instructions, and maintaining appropriate configuration control. Cross-Functional Collaboration:Serving as a key point of contact, collaborating closely with Manufacturing, Quality, Process, Design Engineers, and other stakeholders to overcome technical challenges and drive product improvements. Design & Development Support:Providing crucial Test Engineering input during the design and development phases, from initial concept through to Production Readiness Reviews.What we're looking for from you: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 AND Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject)OR BEng/BSc in relevant Engineering/Technical Degree Expertise in Electronics Test & Diagnosis:A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Test Equipment Experience:Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Manufacturing Systems Proficiency:Familiarity with enterprise resource planning, manufacturing execution and version control system tools (e.g., SAP, MES, PLM) for logging test activities and generating non-conformance quality reports. Desirable Experience working with RF-based circuitry would be preferable, but is not mandatory.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

An exciting opportunity for an experienced Electrical Test Operator to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for an Electrical Test Operator to join the Manufacturing team supporting test and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are tested in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Join a new small team at MBDA Bolton and become an expert in the field of Flying Probe Manufacturing Data Analysis, developing your skills and shaping the future of circuit card manufacturing in MBDA UK. Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to on-site equipment location. Security Clearance: British Citizen. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This is a newly developed team, working to transform the way that defects are located and corrected within Circuit Card Assembly manufacturing, utilising state-of-the-art Flying Probe test equipment to find faults fast and improve the fault investigation process for the test engineering teams. We are looking for a motivated and organised individual, who can work effectively both independently or as part of a wider team. A background in Electronic Engineering, alongside attention to detail and a methodical approach to test development are essential skills for the role. Any existing knowledge of Flying Probe systems (specifically SPEA systems) is welcomed but not essential. You will work alongside experienced manufacturing test engineers and deliver new Flying Probe test packages for the circuit cards created at MBDA's complex technologies site in Bolton. Other aspects of the job involve delivering timely test package corrections and working on improvements to test time, test coverage and reliability of the Flying Probe systems. Additionally, there is also scope within the role to develop your skills as a test engineer, working with the existing test engineering teams to diagnose faults down to component level and suggest remedial actions to ensure the high quality of our products is maintained. MBDA Bolton is a friendly and inclusive manufacturing environment, with full training provided and wealth of knowledge and benefits within the business that will enable you to thrive at MBDA. Key Responsibilities: Creation of new Flying Probe test packages: Using the SPEA 4050S2 test system, you will follow a well-documented development process, starting from an initial circuit card data-pack, through the import to Flying Probe, debugging of tests and statistical data analysis of results. This concludes with a reliable and robust test package that can be deployed to the manufacturing operations team to use. Correction and improvement of existing Flying Probe test packages: As our products evolve and updates are released, we are required to update and improve the existing test packages to accommodate any changes. Another responsibility will be improving the yield on our deployed test packages, by running statistical analysis on test results and making changes accordingly. Communication with stakeholders and cross-team working: As part of investigations and cross-team working, you will perform fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc.What we're looking for from you: A Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and a Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject). OR A BEng/BSc in relevant Engineering/Technical Degree. Key Skills Expertise in Electronics Test & Diagnosis: A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Experience writing operator instructions and engineering manuals is desirable but not required. Test Equipment Experience: Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Flying Probe Systems Experience and Expertise (Desired but not required): Familiarity with Flying Probe development and debugging, including guarding methods, probe allocation and development principals.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Road Freight Operator/ Customer service specialist! I am representing a highly successful and rapidly growing Road Freight company based in Bolton. Known for operational excellence and a strong commitment to staff. Location: Bolton, Greater Manchester Hours: 9:00-17:00 Monday to Friday Salary: Up to £36,000 Excellent bonus package! Salary & Benefits Salary: Up to £36,000 per annum, dependent on experience. Bonus: Monthly performance-related bonus scheme. Training & Development: Structured training program and ongoing professional development opportunities. Progression: Clear pathways for career advancement within the company. This role is pivotal in ensuring the smooth and efficient management of road freight consignments, acting as the primary point of contact. Key Responsibilities Client Communication: Serve as the first point of contact for customer enquiries via phone and email Booking Management: Accurately process and input customer bookings and orders into the company's transport management system Shipment Tracking & Tracing: Monitor the progress of all assigned road freight movements Documentation: Prepare, check, and manage all necessary transport documentation Problem Resolution: Effectively and professionally handle and resolve customer complaints or operational discrepancies Required Skills and Experience Experience: Proven experience (minimum 1 year) in a fast-paced customer service, transport, or logistics environment is highly desirable. Experience within road freight/haulage is a significant advantage. Communication: Excellent verbal and written communication skills, with the ability to maintain a professional and courteous manner under pressure. Organisation: Exceptional organisational skills with a meticulous approach to detail and documentation. IT Proficiency: Competent in using Microsoft Office Suite (Word, Excel, Outlook) and experience with a Transport Management System (TMS) is preferred. Team Player: Ability to work effectively as part of a team while also being self-motivated and capable of working autonomously. Does this sound like you? If so.... Apply now

Electronic Test Operator Initial 12-months Bolton (onsite) £28.35ph, UMB inside IR35 (rising to £29.70ph after 12 weeks) Please note, this role does require SC level Security Clearance and will be working on "UKEO" programmes, meaning the post is only open to sole British nationals due to the nature of work. The Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific responsibilities include: Certify the product in line with Product Certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Carry out setting-up procedures for testing, to include the awareness of the need for periodic recalibration of test equipment. Carry out tests on electronic equipment in accordance with test instructions, using specified test equipment. Carry out simple fault-finding procedures on electronic equipment. Keep test records and reporting faults for rectification. Ensure manufacturing test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21/ONC. Formal further education certificate to HNC or equivalent certificate. Manual handling training. Lifting & Slinging training (Including overhead cranes). ESD training. No colour blindness. Essenitial Requirements: Electrical Apprenticeship in One Of The Following Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 Vocational NVQ3 with Further Education, BTEC ONC/HNC Qualifications must be in Electrical Manufacturing/Engineering subjects Please only apply if you are able to meet the security clearance resctrictions & hold the relevent qualifactions listed above

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunitiesThe opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

A recruitment agency is seeking a CNC setter/engineer for a client in Chorley, Lancashire.The successful candidate will program and set up CNC milling machines, operate within established parameters, and perform inspections.Responsibilities include setting up machines for new products and monitoring

A global manufacturer of advanced materials is seeking a Process Operator in the United Kingdom to follow process instructions and manufacture quality products. Ideal candidates will have experience in a processing plant, strong communication skills, and a commitment to safety.

A leading water services provider in the UK is looking for a Process Operator to join their team.

A regional water services company based in Kent is seeking a Wastewater Process Operator.

Achievement of required processing volume whilst maintaining process specifications such as brix, colour, pH, ash, hardness. Control of process critical control points and process inputs (syrup and chemical. Processing of raw ingredients to produce value added products for the Plaistow packing lines

Tasks and responsibilities as a Shift Operator:. Operate blending, pelleting, and master weigh processes efficiently to meet production schedules. Ensure site processes and standards comply with the UFAS code of practice.

A leading food production company in Greater London is looking for an operational professional to manage various production processes.

Job Title: Wastewater Process Operator. Keen to learn and operate complex processes. Experience in wastewater operations or similar process industries.

A leading sweetener company is seeking a Process Operator at Plaistow Wharf. In this role, you will operate the plant in compliance with SHEQ standards and manage the processing of raw ingredients to produce value-added products. The ideal candidate should have a strong understanding of process oper

Successful applicants should have a post-secondary education in Chemical Processing or Mechanical Discipline and demonstrate strong troubleshooting and communication skills.

Achievement of required processing volume whilst maintaining process specifications such as brix, colour, pH, ash, hardness. Control of process critical control points and process inputs (syrup and chemical). Perform sampling and maintain water quality and records for process utilities such as the c

A leading sugar refining company in Greater London is seeking a Process Operator to manage the operation of the plant according to SHEQ standards. The role involves achieving processing volumes, ensuring product quality, and maintaining safety through strict adherence to procedures. Candidates shoul

Post-secondary education, focusing on Chemical Processing or Mechanical Discipline preferred.

WW Process Operator page is loaded## WW Process Operatorlocations: WHITEWALL CREEK: AYLESFORDtime type: Full timeposted on: Posted Todaytime left to apply: End Date: December 29, 2025 (17 days left to apply)job requisition id: JR7157Closing Date29/12/2025**Job Title: Process Operator

Counterbalance Forklift Production Line Operatives Earn £14-15 per hour Looking for a role that combines forklift skills with production line or Canning line experience? We are hiring Counterbalance Forklift Production Line Operatives for immediate starts with a leading client in Bedford! What You

Shift patterns between 9:30am and 9:30pm | 20 week contract | 30-35 days holiday (pro rata) | 10% in-store discount | Enhanced family leave Everyone who works at Lidl brings something unique to the table - but we also have a whole lot in common.Were hard-working, focused and reliable.As a Lidl Wareh

Aspired Talent are looking for Machine Operators for our Client in Chorley PR6. Hours are Monday to Friday 730am till 430pm MUST have at Least 2 years Experience as a Machine Operator COMPANY OVERVIEW Our client is working with a leading manufacturer in Chorley. OVERALL PURPOSE OF THE JOB Produc

Carefully count, move, and put away the full range of food and non-food products Make sure the stock is processed accurately to the highest standards Be happy to work in cold environments Understand temperature compliance processes Follow processes for recording incorrect deliveries Communicate clea

Monday - Thursday (temporary - permanent contract, 12 weeks probation with the agency) If you possess these skills and are eager to contribute to a thriving production environment, we encourage you to apply for this exciting opportunity as a Production Operator. We are seeking a dedicated and skille

Are you ready for a new opportunity in 2026? DoorCo is seeking exceptional candidates that are committed to delivering excellence and making a difference.Our new rates of pay and benefits apply from 1 January 2026.Our starting rate of pay is £13.Once you are fully trained and have passed your proba

Our client, based near Heathrow, is looking for an experienced 360 Machine Operative to join their team.Shift: Monday - FridayHours: 5:00pm - 6:00amPay: £16.Job PurposeAs a 360 Machine Operative, you will play a key role in maintaining efficient site operations by:Ensuring in-fe

Can you help deliver our Exceptional Alfresco Experience?WINDOW CLEANER WITH EXPERIENCEWe are looking for hard-working individuals with a minimum of 2 years ofwindow cleaning experience.You will be given further training

We are looking forAutomatic machine operators to efficiently and effectively run the auto operator machines and the ultrasonic welding machines for inline packing.

M4 Recruitment are currently recruiting for a reliable and hardworking Warehouse Operative to join a busy and fast-paced warehouse operation.This is a fantastic opportunity for an individual looking for a long-term position with the potential to secure a permanent contract following a successful pro

CNC Joiner / Woodworking Programmer & OperatorLocation: Hinckley, Leicestershire (LE10)Job Type: Full Time, PermanentSalary: From £16.

Deburring Machine Operator | Denham | 37 Hours (Early Friday Finish)The MissionAt Martin-Baker, precision isnt just a buzzword its a lifesaver.

Machine Operator Jobs Devon CPCS & NPORS Plant Operators WantedWe are recruiting experienced machine operators for Machine Operator Jobs Devon across multiple active housing construction and civils projects. With a strong pipeline of work, we can offer a mixture of l

Are you looking for full-time work in a fast-paced, hands-on environment? We are currently recruiting Meat Production Operatives to join our team based at our busy site on the Kellythorpe Industrial Estate in Driffield.Due to the location of the site, you will need to hav

We are an engineering and electron beam welding specialist looking for a motivated individual to join our small, friendly team.The ideal applicant will be practical, precise, and hands-on in their approach to work.Previous experience with electron beam welding is not required, as full in-house train

Are you passionate about quality? Do you have an inquisitive mind and like to look at how and why things work? Are they fit for purpose? Is it working correctly? Is this to standard? Then the role of Production Inspection Operative (Shift Patroller) may just be the role for you.At Tarmac, who you ar

Direct Cleaning Services,We are looking to recruit a suitable operative to work 3.The position is term time with 2 weeks deep cleaning in the summer.The duties will be daily cleaning of a school environment.We would prefer applicants who are able to commute.