Trabajos travel writing en KenilworthCrear alertas

Are you an highly organised and well qualified Health and Safety professional with proven breadth and depth of H&S knowledge and experience? Want to work for a successful, forward thinking and growing organisation that can offer an informal, friendly but professional and hard working environment? If you do we may have a role for you! We are looking for a proven health and safety professional to develop and manage our processes here at DCA continuously developing and implementing good practice in all areas of health and safety to ensure ongoing statutory compliance. If you are successful you will work closely with the Board, the HR Manager and the Facilities Manager to develop and deliver a range of proactive and preventative health and safety initiatives. This role reports directly to the Board, but the successful applicant will need sufficient experience and knowledge to work autonomously in areas and on tasks agreed with the Board. Key tasks and responsibilities The key tasks and responsibilities listed below are intended to be a guide to the range and level of work expected of the post holder. This is not an exhaustive list of all tasks that may fall to the post holder who will be expected to carry out other tasks for which they are appropriately experienced and qualified as may be required by the Board. • Work closely with the Board to support the delivery of DCA’s business plans and to provide an efficient and effective health and safety service ensuring statutory compliance., • Act as the first point of contact for all general H&S queries and provide professional advice and guidance, in line with DCA’s policies and procedures, to Directors, Sector Managers, Project Managers, Skill Leaders and all employees as required., • Keep up-to-date with new health and safety developments, innovations and legislation and advise the Directors of changes required to support DCA’s H&S strategy., • In conjunction with the Board, develop, document and implement updates and enhancements to DCA’s Health and Safety policy documents in line with the latest legislation and DCA’s business needs., • Maintain KPIs for health and safety and use these as the basis for preparing management reports to present in person at Board Meetings on a monthly basis., • Where agreed with the Board, take responsibility for the delivery of specific H&S related projects and new initiatives., • Monitor and audit DCA’s activities in all areas related to health and safety against an agreed audit schedule to ensure compliance in all areas in line with DCA’s policies and procedures and implement any corrective actions., • Create and review risk management documents such as risk assessments and SWPs, covering all aspects of DCA’s activities including, but not limited to, COSHH, fire, home and remote working and general risk assessments, as well as project, market sector or skill specific risk assessments. Propose and implement control measures and/or corrective actions as a result of these risk assessments., • Take day to day lead responsibility for a range of health and safety areas, such as waste, accident reporting, COSHH, machine safety, fire, first aid, overseas travel and DSE., • Monitor the amounts of hazardous waste and arrange disposal as required with the approved contractor., • Work closely with the Facilities Manager and the appointed site fire marshals to maintain and implement DCA’s fire policy, equipment and procedures, including organising fire drills. Support weekly fire alarm testing., • Plan and carry out training sessions in relation to H&S matters, including induction, noise awareness, handling and lifting, and SWP training. Update DCA’s Training Database with staff training records as required., • Plan, conduct and record the ongoing health and safety employee awareness programme for all staff., • Provide support to the Facilities Manager to ensure full health, safety and fire legislative compliance of all contractor activity on our premises, including the application of Permits to Work., • Help to develop and maintain all elements of DCA’s health and safety Management Systems., • Assist with the formulation of the annual H&S budget and manage spend against the budget accordingly., • Liaise with outside organisations and advisors, including co-operation with them during annual external H&S audits., • Purchase, issue and record the distribution of appropriate PPE to staff., • Approve COSHH related purchases and maintain safety data sheets (SDS) in line with DCA’s COSHH policy., • Maintain and review records of all machine and equipment servicing and maintenance., • Arrange and record external inspections and staff surveillance exercises as agreed with the Board or legally required (eg LEV, noise, air quality, occupational health surveillance)., • Maintain data shared via the staff access areas on the Company intranet., • Maintain all the Health and Safety computer based and hard copy files and associated information. Personal specification The candidate should ideally have or be: · Extensive knowledge of effective health and safety management systems and UK health and safety legislation. · Motivated by change and driven by achieving results. · Extensive senior level experience within health and safety including experience of implementing new and creative solutions to maximise performance. · Experience of communicating effectively both verbally and in writing at a senior/board level. · Proven ability in delivering projects, objectives and services against agreed deadlines and with the agreed performance objectives. · Proven ability to build effective working relationships. · Ability to influence and engage with a highly qualified and technically skilled workforce. · Ability to deliver both positive and challenging messages to all levels of staff in a manner that achieves the desired results. Be confident in the delivery of the decisions made. · Ability to contribute new ideas and ways of working. · Ability to plan and prioritise work in line with agreed deadlines and objectives. · Self-motivating and able to work on own initiative. · High level of organisational and co-ordinating skills. · Reliable and adaptable. · Able to produce concise and accurate records and reports with a high level of attention to detail. · IT Literate – Word, Excel, PowerPoint and Outlook. · Hold a relevant degree, or equivalent combination of qualifications and experience. · NEBOSH qualified

Job Title: Independent Quality Controller Please double check you have the right level of experience and qualifications by reading the full overview of this opportunity below. Location: Studley, B80 (Initial Assignment) Looking for a career where your ambition meets real opportunity? Join Persimmon Homes as Independent Quality Controller and step into a role where your success is celebrated, your growth supported, and your work truly matters in helping to ensure the homes we build meet the highest standards — for our customers and our communities. Why Persimmon Homes? We're one of the UK's largest and most established housebuilders — FTSE 100 listed, with 29 regional offices and thousands of quality homes built every year. At Persimmon, we don't just build homes — we build inclusive and rewarding careers. When you join us as Independent Quality Controller, you'll benefit from: • Competitive salary, • Company Car/Car Allowance, • 5* housebuilder - Be part of a company that consistently delivers quality homes and outstanding customer satisfaction, • Life Cover & Contributory Pension, • Health Care, • Bonus, • Employee Benefits Platform – giving you access to high-street discounts, wellbeing support, and more This is an exciting opportunity to join the Persimmon Homes Construction Team as an Independent Quality Controller. Reporting to the Divisional Construction Compliance Manager, you will play a key role in ensuring our homes meet regulatory and warranty standards before completion with reference to the Persimmon Way. This is primarily a site-based role across the region, with some flexibility for home working when business needs allow. What you'll do as an Independent Quality Controller • Conduct regular quality and compliance inspections across development sites, • Produce clear, accurate reports identifying risks, non-compliance and improvement actions, • Monitor performance of subcontractors and site teams against agreed standards, • Provide constructive feedback and coaching to support quality improvement, • Investigate workflow or compliance issues and ensure corrective actions are implemented, • Work collaboratively with construction, technical, commercial and buying teams to uphold build standards, • Contribute to continuous improvement in line with the Persimmon Way We're open to candidates from a range of construction and quality-related backgrounds. • Experience in construction quality (or related background), inspection, compliance, or a similar technical role including residential, building control, social housing, engineering, retrofit, warranty inspection or other regulated construction environments. xrnqpay, • Knowledge of UK building regulations and warranty standards (or the ability to develop this quickly), • Relevant construction, inspection or quality-related qualifications — or equivalent practical experience, • Strong report writing and communication skills, • Confidence working independently while collaborating across multiple teams, • A proactive, improvement-focused mindset, • A driving licence is required due to regional site travel.

About the job Job summary Senior Business Analyst As a Senior Business Analyst at the Intellectual Property Office (IPO) you will join an established and supportive community of Business Analysts and work across all areas of projects and service lifecycle. In this role you will work as part of an Agile multi-disciplinary squad alongside product managers, service design, data specialists, developers, and testers to deliver new internal and external services. You will be expected to be proactive and take ownership of analysis activities and deliverables including writing user stories with acceptance criteria, modelling business processes, and contributing to three amigo/refinement sessions. You must be able to build strong working relationships with both internal and external stakeholders at all levels, demonstrating good leadership and collaborative working skills. You will need excellent presentation and communication skills, across a variety of situations and levels of stakeholders. You will work together with IPO colleagues, partner organisations and/or suppliers to ensure that approaches and outcomes are fit for purpose meeting business needs, user needs and IPO standards. Within the Business Analyst Community, you will play an important role in establishing and promoting best practice and standards. You will support the professionalisation and maturity of the Business Analysis practice through peer support, tutoring and mentoring of others in the team. We are looking for enthusiastic people with a desire to pick up new skills in a fast-paced environment and are committed to delivering excellent services for our customers. This is an excellent opportunity for individuals to join our IT team at a time where the IPO has set out how to help make the UK the most innovative and creative country in the world by: • Delivering Excellent IP Services, • Creating a World-leading IP Environment, • Work alongside product managers to create a pipeline of fully developed user stories ensuring that the business and technical viewpoints are understood and acknowledged., • Undertake key business analysis activities, including but not limited to, requirements elicitation, documentation of business processes, workflows and business rules, using suitable methodologies, tools and standards., • Advise on business scenarios and develop acceptance criteria to ensure requirements can be traced to develop new functionality., • Identify and articulate options considering opportunities and limitations related to business and technology., • Present complex information in a tailored format, allowing you to communicate key findings and put forward recommendations to the wider organisation., • Tutor/mentor/coach BAs and Junior BAs by providing accurate and professional support., • Background in Business Analysis with considerable knowledge and understanding of Business Analysis principles and techniques., • Excellent analytical and problem-solving skills to bring clarity to business problems and shape business solutions., • Considerable experience working in a software development setting with technical colleagues i.e. data, developers, testers., • Comfortable working with individuals at various skill levels up to and including senior management levels., • Experience of gaining consensus where there are strong differing opinions., • BCS International Diploma in Business Analysis, or equivalent., • Strong presentation and communication skills across a variety of situations and levels of stakeholders., • Experience of developing BA best practice, standards and guidance., • Upload an anonymised copy of your current CV. Please remove all identifying markers such as name, title, education institution etc., • Use this to explain why you're suitable for the role ., • Structure your statement around the essential criteria in the Person Specification., • Communicating and Influencing, • Working Together, • Unlimited Pluralsight video learning access, • Access to Microsoft's ESI training suite, • Hybrid working with no core hours, • Substantial support for career progression, • 25 days annual leave moving to 30 days in annual increments, • UK nationals, • nationals of the Republic of Ireland, • nationals of Commonwealth countries who have the right to work in the UK, • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities with settled or pre-settled status under the European Union Settlement Scheme (EUSS) (opens in a new window), • nationals of the EU, Switzerland, Norway, Iceland or Liechtenstein and family members of those nationalities who have made a valid application for settled or pre-settled status under the European Union Settlement Scheme (EUSS), • individuals with limited leave to remain or indefinite leave to remain who were eligible to apply for EUSS on or before 31 December 2020

Rullion are looking to recruit for the below role: Repairs Engineer ASAP Start Duration - Initially 6 months Rolling contract Inside IR35 £41-43 Per hour PAYE Rates Location - Warwick UK. Hybrid Full and Part Time Hours depending on flexiblility Our client an exciting opportunity within the Global Repair Network Team working closely with our external network of MROCs (Maintenance, Repair & Overhaul Centre's) and authorized Repair Vendors. The Repair Engineer (FTC) role within the Repair Network Engineering Team will play a key part in supporting the existing global capability within the Global Repair Network Team as well as future capability developments. Job Description. Support component repair development activities. Assess, investigate and sentence non-conforming components. Support repair scheme amendment/writing and technical variances. Support implementation of improvements & technical solutions (internally & externally). Represent engineering in the wider community during reviews and discussions. Maintain regulatory compliance per company, national and international standards. Possible travel to MROCs & repair vendors to support engineering activities. Your profile Engineering degree in a Mechanical, Materials or Manufacturing discipline. Alternatively, an acceptable level of academic and practical experience Preferably have some knowledge of gas turbines and/or industrial equipment along with ...

Permanent job – regional building surveyor, social housing Purpose of the roleThe Regional Project Surveyor is responsible for ensuring that the Group’s regional housing stock, and other properties where it delivers services, are well maintained, safe and secure for tenants and residents. They are key in helping to deliver robust asset management of the stock as well as assisting with day-to-day maintenance enquiries. In addition, they will be vital in the delivery of statutory compliance, including gas, fire, water, electrical and asbestos safety.The post-holder will be well-organised, highly motivated and will play a key role in delivering a range of planned maintenance and improvement projects across our social housing portfolio. This role requires a strong understanding of building surveying principles, contract management, and a commitment to providing excellent service to our tenants and the people we support.The post-holder will be expected to project manage asset management services including the Planned Maintenance, Refurbishment, Development and Adaptation of our domestic and commercial assets within their region, working with the Operational Asset Manager and the Head of Property and Housing Supply to develop and improve services, policies and procedures. The role is vital in ensuring the optimal use of all the Group’s built assets and the provision of good quality homes for our tenants and the people we support. This role will cover South East London, Home Counties and the Midlands. It offers hybrid working Core duties • Manage and oversee a variety of planned maintenance and improvement projects, from inception to completion, within budget and agreed timescales., • Conduct Stock Condition Surveys and inspections of properties to identify necessary repairs and improvements., • To effectively monitor and manage performance and delivery within Best Value principles, continually striving towards service improvement and tenant satisfaction., • Develop the data collection processes and how the information is shared and communicated within the Housing Team and the wider Group., • Develop detailed specifications and schedules of works., • Procure and manage contractors, ensuring compliance with all relevant regulations and health and safety standards., • Accurately record and manage electronic stock condition data using housing management system, Pyramid, • Monitor project progress, track costs, and report on performance., • Liaise effectively with residents, stakeholders, and internal teams., • Ensure all work is carried out to a high standard and meets resident satisfaction targets., • Identify and manage risks associated with projects., • Administer contracts and manage payments to contractors., • Keep accurate records and documentation related to projects., • Contribute to the development and improvement of project management processes. Strong knowledge of building regulations, health and safety legislation, and contractAdministration.Excellent communication and interpersonal skills, with the ability to build strongRelationships with residents and stakeholders.Ability to manage multiple projects simultaneously and prioritise effectively.Experience of conducting Stock ConditionSurvey and other building inspections. Strong analytical thinking and problem-Solving skills.Ability to manage multiple projectsSimultaneously and prioritise effectively.Communicate clearly and with confidence, both in writing and verbally, at all levels and to diverse audiences, with a high degree of clarity and professionalism.Excellent organisational skills and ability to manage own workload and deliver to timeand budgets.Have clear verbal and written communication skills and excellent IT skills.Ability to present complex concepts or ideasto a range of audiences. What you'll get in return The rewards • Monthly Essential car allowance, • Staff discount shopping scheme ‘Rewarding Dimensions’, • We offer a salary advance scheme where you can access up to 50% of the money you've earned before payday., • Employee Assistance Programme, • Pension scheme, • Long Service Awards, • Qualification scheme, • Employee recognition scheme 'Inspiring People', • Discounted health and dental cover, • Life Assurance If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. 4759900

Head of Fundraising £35,000 £40,000 Have you got what it takes to succeed The following information should be read carefully by all candidates. 35 hours per week Remote (with occasional travel) Ideal location: Between Manchester & London Travis Talent are proud to be recruiting on behalf of a well-established and nationally respected charity seeking an experienced Head of Fundraising to join their Income Generation team. This is an exciting opportunity for a relationship-driven fundraiser who thrives on securing income, building meaningful partnerships and developing long-term funding strategies. The role is almost entirely remote, offering excellent flexibility, with occasional travel required to Milton Keynes and Sheffield for key meetings and events. We are particularly keen to hear from candidates based between Manchester and London to support ease of travel and stakeholder engagement. The Opportunity Reporting to the Head of Income Generation, you will be responsible for developing and delivering income from Foundations, Trusts and Corporate partners, ensuring annual income targets and KPIs are achieved and exceeded. You will manage and grow an existing portfolio while proactively identifying new funding opportunities, building strategic partnerships and strengthening stewardship programmes. This is a varied and strategic role combining income generation, relationship management, proposal writing and internal collaboration. Key Responsibilities • Secure funding from Trusts, Foundations and Corporate sources to meet agreed income targets., • Develop and maintain strong relationships with existing funders, ensuring excellent stewardship and retention., • Identify and cultivate new funding opportunities and Corporate prospects., • Write compelling funding applications, cases for support, proposals and presentations., • Manage reporting requirements for funders, ensuring high-quality and timely submissions., • Lead Corporate sponsorship activity for key events and projects., • Work collaboratively with communications colleagues to produce impact-driven case studies and content., • Maintain accurate records on internal databases and ensure funding pipelines are strategically managed., • Attend networking events and external meetings to grow the charitys corporate presence. You will ideally have: • At least 1 years experience in a Trusts, Foundations or Corporate fundraising role, • Experience writing successful funding applications and donor reports, • Strong relationship-building and stakeholder management skills, • Excellent written and verbal communication, • High attention to detail and strong organisational ability, • Confidence using CRM/database systems and MS Office, • Salary of £35,000 £40,000, • 35-hour working week, • Almost entirely remote working, • Opportunity to shape and grow a key income stream, • Work within a supportive and collaborative charity environment

Job Title: Legionella Risk Assessor / Water Hygiene EngineerLocation: Rugby, MidlandsSalary/Benefits: £26k - £38k + Training & Benefits Apply now, read the job details by scrolling down Double check you have the necessary skills before sending an application. We are recruiting across the Midlands for an experienced Legionella Risk Assessor / Water Hygiene Engineer, to cover commercial and domestic contracts. You will be joining a national outfit, who specialise within the Legionella / Water Hygiene industry, and have recently grown their presence across the Midlands. Daily duties will include: ACOP L8 compliance tasks and completing legionella risk assessments. You must be flexible to travel in line with company requirements, and will be expected to support other engineers with training. Salaries and benefits packages on offer are excellent.You will be travelling across: Rugby, Daventry, Northampton, Royal Leamington Spa, Stratford-upon-Avon, Redditch, Nuneaton, Leicester, Tamworth, Market Harborough, Bromsgrove, Droitwich Spa, Birmingham, West Bromwich, Walsall, Dudley, Wolverhampton, Stourbridge, Halesowen, Lichfield, Cannock, Coalville, Swadlincote, Burton upon Trent, Lougborough, Nottingham, Derby. Experience / Qualifications:-Will have worked as a Legionella Risk Assessor / Water Hygiene Engineer-Must hold the City and Guilds (WMSoc) in Legionella Risk Assessing-Excellent industry technical knowledge, including HSG 274 and ACOP L8 guidelines-Hardworking attitude-Good foundation of literacy and numeracy skills-Confident using IT software to complete reports The Role:-Carrying out a wide range of ACOP L8 compliance duties to ensure client sites remain safe-Showerhead descales-TMV servicing-Closed system sampling-Cleans and disinfections on cold water storage tanks-Undertaking legionella risk assessments on domestic hot and cold water systems-Writing detailed risk assessment reports-Maintaining strong working relationships with clients-Travelling in line with company needs Alternative job titles: Environmental Service Technician, Legionella Technician, Water Hygiene Consultant, Water Hygiene Risk Assessor, Water Treatment Engineer. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. xrnqpay Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

Rullion are looking to recruit for the below role: Repairs Engineer ASAP Start Duration Want to make an application Make sure your CV is up to date, then read the following job specs carefully before applying. • Initially 6 months Rolling contract Inside IR35 £41-43 Per hour PAYE Rates Location, • Warwick UK. Hybrid Full and Part Time Hours depending on flexiblility Our client an exciting opportunity within the Global Repair Network Team working closely with our external network of MROCs (Maintenance, Repair & Overhaul Centre's) and authorized Repair Vendors. The Repair Engineer (FTC) role within the Repair Network Engineering Team will play a key part in supporting the existing global capability within the Global Repair Network Team as well as future capability developments. Job Description. Support component repair development activities. Assess, investigate and sentence non-conforming components. Support repair scheme amendment/writing and technical variances. Support implementation of improvements & technical solutions (internally & externally). Represent engineering in the wider community during reviews and discussions. Maintain regulatory compliance per company, national and international standards. Possible travel to MROCs & repair vendors to support engineering activities. Your profile Engineering degree in a Mechanical, Materials or Manufacturing discipline. Alternatively, an acceptable level of academic and practical experience Preferably have some knowledge of gas turbines and/or industrial equipment along with repair / manufacturing techniques. Ability to understand component definition drawings and relate to the design intent in the engine assembly. Excellent written and verbal communication skills in English are required. You will be able to interact at different levels and be a flexible self-starter. Be a team player and work with a wide range of people (both internal and external). Demonstrate ability to self-manage priorities within the team's objectives to achieve expectations. Preferably have some experience in a customer facing environment with a proven record of delivering technical solutions and improvements is advantageous. xrnqpay If available please submit CV and a member of the team will be in touch Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.

Join the Samworth Brothers Team and become part of our dynamic family! Considering applying for this job Do not delay, scroll down and make your application as soon as possible to avoid missing out. At Samworth Brothers, we genuinely care about our colleagues and strive to create an engaging environment that values your unique contributions. We are committed to your success and offer a range of exceptional benefits that we believe supports your life and personal aspirations: - • Enhanced pension scheme, • Private health scheme, • Employee discount scheme, • Experience annual pay reviews, • Profit related pay, • Leading specification and artwork activity for allocated customer accounts, ensuring all data is accurate, compliant and delivered on time., • Managing launch and housekeeping specifications, following critical paths and supporting NPD, Process and Commercial teams from concept to launch., • Training and coaching trainee specification technologists, including the use of Oracle and internal systems., • Presenting confidently to senior managers and retailers, providing accurate data and updates., • Writing and maintaining customer specifications across multiple platforms (including Foods Connected, Excel-based formats and retailer systems)., • Coordinating artwork approvals, cutter guides and pack copy checks, working closely with studios and internal stakeholders, • Being available for audit support at both sites (Saladworks & Kettleby Foods), ensuring all specs and documents remain audit-ready.The Ideal CandidateWe believe that success is built upon collaboration and diverse perspectives. At Samworth Brothers, we welcome candidates who are passionate about working together to achieve greatness. As a valued member of our team, you will bring the following skills and experience:, • Minimum 2 years specification writing experience within the chilled food industry., • Strong understanding of food labelling regulations, retailer guidelines and artwork processes., • Confident using specification and artwork systems (Tesco, M&S, Sainsburys, Morrisons, Waitrose, Lidl etc.)., • Ability to travel between both Saladworks and Kettleby Foods as required., • Competent in Microsoft Office and comfortable learning new systems. Ready to make a difference? Join us and be part of something special! Were proud to be an Equal Opportunities employer making diversity and inclusion a core part of everything we do. We also actively welcome applications from neurodivergent individuals and are committed to a recruitment process thats fair, respectful, and free from bias. If you need any adaptations to the application or interview process, please do let us know. Samworth Brothers do not engage with unlicensed gangmasters or third parties. Samworth Brothers will NEVER ask you for money in order to provide you with employment. xrnqpay If you are in any doubt, please contact an official Samworth Brothers representative.

EDM Applications Engineer Location: Coventry-based with UK & European travel Salary & Benefits: Competitive salary, company car, private healthcare, pension A leading UK engineering solutions provider specialising in high-end machine tools is looking to appoint an EDM Applications Engineer as part of its continued growth. The business delivers fully engineered solutions across conventional and Electrical Discharge Machining (EDM), ranging from standalone machines to fully automated manufacturing cells. The Role This is a hands-on, customer-facing applications role combining technical expertise with project delivery. The successful candidate will support customers through training, pre-sales engineering, and the delivery of turnkey EDM solutions across the UK and Europe. Key Responsibilities Deliver structured customer training on EDM machine operation, programming, and maintenance Support pre-sales activity, including component test cuts, fixture planning, and cycle time estimation Develop machining strategies and produce CNC programs using ISO and CAM-based systems Manage prove-out, First Article Inspection (FAI), and acceptance criteria at customer sites Work independently and collaboratively to deliver complex, high-value engineering projects Travel across the UK and Europe to support turnkey project implementation Candidate Profile At least 4 years’ experience within an EDM machine tool environment (Wire EDM, Sink EDM, or Fast Hole Drilling) Strong working knowledge of ISO NC programming Practical background as a Production Engineer or CNC Machinist / Setter / Operator Experience using CAM software for program generation and simulation (beneficial but not essential) Highly self-motivated with strong organisational and time management skills Clear and confident communicator, both written and verbal What’s on Offer Exposure to advanced machining and automation technologies Varied role with international travel and customer interaction Competitive salary package Company car, private healthcare, and pension scheme This opportunity would suit an experienced EDM professional seeking a customer-focused applications role with technical depth and variety. Data Protection Notice: By applying for this position, you consent to Recruit Engineering processing and storing your personal data, including your CV, contact details, and any other relevant information, for the purpose of providing work-finding services. This consent includes forwarding your details to our clients and storing your information on our recruitment software database. Your consent will last for two years, and you can withdraw it at any time by contacting us in writing or via email

Trainee Design Technician Coventry £25,000 with good progression prospects key skills: Trainee Design technician, construction, timber engineering Clear progression path | Excellent prospects throughout the company | Use your people and technical skills | Global company with a family business approach | competitive starting salary with good benefits package Trainee Design Technician required to join a team of experienced designers, where you will be working on structural roof and floor design solutions to clients in the UK and Ireland. Reporting to the Design Office Manager, you will be: Reviewing architectural drawings and working on designs of timber roof and floor components Producing 3D building models, inputting architectural data into specialist CAD design software Preparing construction drawings for use by client and site teams Supporting your customers with design or software queriesOnce your 6-month training and probation period has completed, you will also be: Assisting in the training of software use and timber design Attending site visits, writing reports and testing softwareAbout you: You will be within close commuting distance of the office in the Coventry area Ideally educated to A-level with good Maths and trigonometry skills (this will be tested at interview!) Keen to progress your career, working in a technical and customer supporting role Your working hours will be 08:30 to 17:00, Monday to Friday but an earlier or later start/finish can be arranged to suit travel arrangements and you will have 33 days holiday per year (including Bank Holidays) This will give you a great opportunity to join a specialist company and take your career to suit your skills and interests. You will be able to contribute to the business in a very real way, helped by the flat structure and open communication approach In addition to your salary, you will also have an annual bonus paid at Christmas, based on company performance as well as your annual performance review Please apply today or call Annie at ARV Solutions if you would like to discuss this role before applying. Diversity Equality & Inclusion: This employer is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, or age

Are you passionate about supporting vulnerable people? An exciting opportunity has arisen for a full time Domestic Abuse Practitioner to join our Domestic Abuse Service. You will be joining a multi service charity based in Coventry. In return, we offer a competitive salary of £28,000 plus on-call payments (between £2,000 and £3,000 p.a.) and a contributory pension scheme. Annual leave 26 days + bank holidays with an additional day’s leave for every 2 years of service up to a maximum of 29 days per annum. We also offer a comprehensive in-house training programme. What We Do: The charity has a fully trained staff team providing Supported Accommodation to victims of domestic abuse. We have an on-site Children’s Nursery that provides full day care for pre-school children. Our other services include a Complex Needs Supported Accommodation service and a Counselling service. We are looking for a reliable and committed individual who is able to: Offer a high-quality service to individuals and people with children living in our supported accommodation service, supporting them to achieve and sustain independent living, through one to one and group work delivery. Be responsible for managing a caseload for people who are accessing the supported accommodation service. Provide a resettlement service for service users that have transitioned into their own accommodation. Act as a lead within the service for a specific underrepresented group (e.g. ethnic minorities, men, LGBT, older people, people with care and support needs). The successful candidate will have: NVQ Level 3 in a related area of work and/or a minimum of 3 years relevant experience with working with vulnerable people and/or willingness to work towards a qualification. Experience of working with vulnerable people. Experience of assessing the needs and risks of vulnerable people. Experience of 1 to 1 work and carrying a caseload. Experience of working in partnership with a range of different agencies. Experience of record keeping and report writing. Knowledge and understanding of the difficulties faced by vulnerable people. Knowledge of best practice in relation to safeguarding adults and children. Understanding and passion for the work of Valley House. Ability to/or desire to learn to develop and deliver group work programmes. Ability to work effectively within a team and on own initiative. Competent in the use of IT tools, including Word, Excel and Outlook. Excellent written and verbal communication skills. Additional requirements: Ability to work flexible hours. To take part in an out of hours on call rota with other staff. You will need to live within a 30 minute drive to Valley House. Be mobile and able to travel city wide at short notice (car driver with use of a vehicle). Candidates who are not car drivers, due to a disability, will be considered. This post requires a satisfactory DBS check. This vacancy is open to women only (exempt under the Equality Act 2010 Schedule 9, Part 1). The hours of work are 37.5 hours per week. The closing date is 12 noon on Monday 20 April 2026 and interviews will be held on Wednesday 29 April 2026. If you are shortlisted for interview you will be notified via email. For more information about Valley House please visit our website (url removed)

An exciting opportunity has arisen for Domestic Abuse Practitioners to join our Domestic Abuse Complex Needs service, working full-time, 37.5 hours per week. You will be joining a multi service charity based in Coventry. In return, we offer a competitive salary of £28,000 p.a., plus on-call payments (minimum £2,000 - £3,000) per annum and a contributory pension scheme. Annual leave 26 days + bank holidays with an additional day’s leave for every 2 years of service up to a maximum of 29 days per annum. We also offer a comprehensive in-house training programme, access to a range of accredited training, clinical supervision, subsidised nursery places and an Employee Assistance Programme for health and wellbeing support. What We Do: The charity has a fully trained staff team providing Supported Accommodation to survivors of domestic abuse and with complex needs. There is also an on-site Children’s Nursery that provides full day care for pre-school children. We are looking for reliable and committed individuals who are able to: Offer a high-quality service to survivors of domestic abuse with complex needs accessing Valley House Safe and Supported Accommodation in accordance with Valley House’s operational policies and procedures. Manage a small caseload of service users who are accessing the 7-bed Complex service. Supporting service users to achieve and sustain independent living, through one to one and groupwork delivery. Provide a resettlement service for service users that have transitioned into their own accommodation. Be part of a staff rota covering shifts, Monday to Friday, 8:30am to 4:30pm. The successful candidate will have: QUALIFICATIONS & EXPERIENCE Required Desirable Extensive experience in the related area of work and willingness to work towards a qualification ü Mental First Aider qualified or willing to undertake this training, Valley House will fund this ü Experience of working with individuals and children affected by domestic abuse ü Experience of working with individuals experiencing Mental Health and/or alcohol and Drug misuse ü Experience assessing the needs and risks of people affected by domestic abuse ü Experience of 1 to 1 work and carrying a caseload ü Experience of working in partnership with a range of different agencies ü Experience of record keeping and report writing ü KNOWLEDGE & UNDERSTANDING Knowledge and understanding of the difficulties faced by survivors of domestic abuse ü Knowledge and understanding of domestic abuse, mental health and alcohol and drug misuse ü Knowledge of effective interventions in relation to working with survivors of domestic abuse where complex needs are present ü Knowledge of best practice in relation to safeguarding adults and children ü Understanding and passion for the work of Valley House ü SKILLS AND ABILITIES Ability to develop and deliver groupwork programs ü Ability to work effectively within a team and on one’s own initiative ü Competent in the use of IT tools, including Word, Excel and Outlook ü Excellent written and verbal communication skills ü ADDITIONAL REQUIREMENTS Ability to work flexible hours with a flexible approach ü To take part in an out-of-hours on-call Rota with other staff ü Need to have a UK driving Licence and access to a vehicle and able to travel city wide at short notice ü This post requires a satisfactory DBS check. This vacancy is open to women only (exempt under the Equality Act 2010 Schedule 9, Part 1). The hours of work are 37.5 hours per week. The closing date is 12 noon on Monday 20th April 2026, with interviews scheduled to take place on Tuesday 28th April (pm.) If you would like to know more about Valley House please visit our website (url removed)

Applications Engineer – Specialist Grinding Solutions Coventry | UK & Europe travel | £38,500–£45,000 + Company Car + Benefits | Permanent A respected machine tool manufacturer specialising in advanced grinding technology is looking for an Applications Engineer. You'll be supporting customers across the UK and Europe with turnkey grinding projects - developing machining strategies, creating CNC programmes, supporting installations, and seeing projects through to successful machine acceptance. What you'll be doing: Developing tailored machining strategies for customer grinding projects Producing CNC programmes (Fanuc experience preferred) Managing and documenting First Article Inspections (FAI) Delivering customer training and supporting machine acceptance and sign-off Contributing to turnkey projects both on-site and remotely Working closely with internal teams and European engineering colleagues Regular travel to customer sites across the UK and Europe What you need: Solid engineering background with 4+ years in a machine tool environment Previous experience as a Production Engineer or CNC Setter/Operator Confident NC programming skills (Fanuc controls advantageous) Proactive approach with strong communication skills Ability to manage multiple projects simultaneously Creep feed grinding experience beneficial but not essential Familiarity with CAM and machine simulation software advantageous What's on offer: £38,500–£45,000 depending on experience Company car Private healthcare Pension scheme Ongoing training and development Varied role with regular travel and direct customer interaction Opportunity to work with advanced grinding technologies alongside a strong engineering team This is a permanent position and a genuine step up for CNC machinists, programmers, or production engineers looking to move into a customer-facing applications role with an established industry leader. Data Protection Notice: By applying for this position, you consent to Recruit Engineering processing and storing your personal data, including your CV, contact details, and any other relevant information, for the purpose of providing work-finding services. This consent includes forwarding your details to our clients and storing your information on our recruitment software database. Your consent will last for two years, and you can withdraw it at any time by contacting us in writing or via email