Construction & Trades jobs in Cincinnati, Ohio - Page 11Create job alerts

Job Description Overview Tradesmen International is immediately hiring experienced Journeyman Roofers for projects located in the Cincinnati, OH area. This is a first shift opportunity, and the pay rate is $25-32/hour based on experience and skill level. If you are a Roofer and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Peel & replace TPO roofs, TAC, TPO, and trim, • Other tasks as assigned Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Responsibilities: • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation, • Process warehouse materials, • Rely on instructions and pre-established guidelines/procedures to perform the functions of the job, • Support positive corrective actions and identification of root cause, • Other duties as assigned.Required Skills, • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • MS Outlook, and EXCEL experience, • Experience with hand measurement gages, conduct conventional inspection to engineering requirements, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Valid drivers license and auto insurance required.Additional Desired Skills:, • Prior practical experience and implementation of Quality inspection tools and equipment., • Experience in RCCA, and problem solvingGeneral Requirements, • Ability to handle complex situations and solve complex problems, • Ability to work effectively under pressure to meet deadlines, • Ability to press and analyze technical and business information, • Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers, • Ability to remain seated for up to 5 hours at a time, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Must be able to simultaneously manage several objectives, • Must be detail oriented, organized, and self-motivatedAdditional Qualifications (Preferred):, • 3+ years’ experience as a quality inspector or technician., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Office products, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location. • Valid Driver’s License, • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.70/mile 2024) when driving personal vehicles on company business, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded) Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR 7tQdoa2aDP

Job Description Engineer/Maintenance Do you like making repairs and learning about how things work? Do you want to be a part of a team that creates a safe and enjoyable environment for our guests? We are hiring for a Maintenance Personnel! Could this be you? What We Offer: • Career advancement opportunities, • Employee discounts, • Competitive pay, • Daily Pay, • Flexible work schedule, • Comprehensive benefits for you and your family including (medical, vision, dental, 401k, Profit Sharing) Maintains and performs general repairs of buildings and maintains grounds by performing the following duties QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ESSENTIAL JOB FUNCTIONS • Handle all equipment repairs – contacting vendors, gathering bids, presenting to Regional Engineer and Regional Director of Operations for approval, • Complete all warranty submittals to corporate maintenance staff, • Complete monthly maintenance inventory, submit supply orders to General Managers, • Conduct room PMs with support of maintenance personnel, • Track room PMs accurately, ensure both hotels complete all rooms every quarter, • Coverage of daily maintenance duties when call off occurs (and/or during vacation days), • Daily review of pool chemical logs and maintain and service pool and spa areas including testing and recording as stated by State and City regulations, • Must have CPO certification, • Point of contact during all Regional Engineer visits, the Chief Engineer should spend the entire visit with Regional Engineer, • Weekly property walks with General Manager, create list of repairs needed and delegate accordingly, • Weekly manager meeting participation, • Monitor Quore, ensure maintenance personnel is accurately using Quore (if applicable), • Actively monitor guest scores and make necessary adjustments to improve maintenance scores, • Track expenses vs monthly budget to ensure they are in line, • Be on-call for any and all after hours emergencies – responding promptly if needed, • Ensure QAs are PASS score for condition scores, • Oversee houseman at both hotels and train new maintenance personnel, • Complete any larger special projects needed by the hotel, • Receives written work orders or verbal instructions from supervisor, • Cleans internal areas of buildings, including sweeping and mopping, • Maintains cleanliness of public areas, storage areas, and parking lot, • Empties trash cans and consolidates trash for weekly pickup, • Repairs parking lot and sidewalks with asphalt, cold patching materials and concrete, • Operates snow removal equipment to maintain parking lots and sidewalks, • Maintains and repairs buildings’ plumbing and electrical systems, including replacing worn or defective parts such as switches and fuses, • Maintains all fixtures and equipment according to preventative maintenance schedule, and records such as maintenance in log book and Property Preservation Calendar, • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as truck , street sweeper, and riding mower, • Assists other departments with moving furniture and unloading and storing supplies, • Keeps accurate records of key control changes, • All other duties as assigned What we are looking for: • 6 months – 1+ year of hotel maintenance experience preferred, • Passionate about hospitality and creating an exceptional guest experience, • Ability to performs Daily Maintenance Engineer Checklist, • Ability to maintain and repair buildings’ plumbing and electrical systems, including replacing worn or defective parts such as switches and fuses, • Ability to Identify and report needed repairs to the parking lot and sidewalks., • All other duties as assigned.

Job Description Build your Career with an Industry Leader Headquartered in Cincinnati, LSI Industries (NASDAQ: LYTS) specializes in the creation of advanced lighting, graphics, and display solutions across strategic vertical markets. The company’s American-made products, which include lighting, print graphics, digital graphics, refrigerated and custom displays, aim to help businesses stand out in a competitive market. With a workforce of approximately 2,000 employees and 20 facilities throughout North America, LSI provides top-quality solutions for its clients. LSI’s management team is focused on continued profitable growth. We are looking for a Maintenance Technician to support our team at our corporate location in Cincinnati, Ohio Summary Receives written work orders or verbal instructions from supervisors. Will work directly and/or indirectly with shift maintenance personnel. Performs general machine, electrical and building preventative maintenance. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Performs major and minor electrical repairs and installation., • Minor building repairs., • Paints interior and exterior walls and trim., • Troubleshooting and repair of various equipment mechanical, hydraulic, pneumatic, and electrical., • Performs preventative maintenance work orders including burner cleaning and shot blast upkeep., • Air tool repair, • Performs minor repairs., • Minor HVAC repairs and maintenance including filter replacement., • Snow removal for parking lots and sidewalks, • Replace worn or damaged parts such as hoses, wiring, and belts. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add and subtract two-digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Reasoning Ability Ability to apply common sense understanding to conduct detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills The employee must be able to use email, understand simple software, and navigate the internet to find parts and equipment and be able to effectively recognize viable component cross for replacement parts to repair equipment. Benefits: • 401(k), • Health insurance, • Dental insurance, • Vision insurance LSI is committed to a diverse and inclusive workplace. LSI is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description Job Summary We are seeking an experienced Painter to join our team. The ideal candidate will have residential painting experience and strong attention to detail. Responsibilities include preparing surfaces, applying paint, and delivering high-quality finishes. This role requires reliability, a focus on safety, and the ability to work both independently and as part of a team. Duties • Prepare surfaces by cleaning, sanding, patching, and priming as needed., • Apply paint, varnish, and other finishes using brushes, rollers, or spray equipment., • Perform caulking, plastering, and finishing work to ensure smooth, even results., • Complete restoration and renovation work on existing structures., • Safely operate hand and power tools during projects., • Maintain a clean, organized workspace while following safety procedures., • Work collaboratively with other trades to ensure smooth project completion. Experience • Proven experience in residential, commercial, or industrial painting., • Strong math and estimating skills for material and job calculations., • Basic carpentry experience, including trim and frame work, and concrete finishing., • Masonry knowledge is a plus., • Skilled in operating airless spray equipment., • Prior construction site experience preferred., • Maintenance background a plus. We’re looking for dependable professionals who take pride in their work and deliver quality results. If this sounds like you, we’d love to hear from you.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Provides day-to-day monitoring and basic plant and pump/booster station operations, routine lab tests and basic corrective and preventative maintenance activities. Primary Duties/Responsibilities: • Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure., • Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses. Reports and documents results of work performed and enters into appropriate database. Promptly reports any operational problems with machines or equipment to Lead or Supervisor., • Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule. Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder., • Performs routine lab tests and prepares reports per procedure., • Performs routine instrument calibration for portable meters including, but not limited to, dissolved oxygen, pH, H2S, percent oxygen, lower explosive limit., • Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored. Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation., • Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles, mobile equipment and material handling equipment for operational and maintenance purposes., • Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint., • Spends 100% of the time in operations environment., • Typically spends 25 – 35% of time exposed to outdoor and sometimes inclement weather., • Company service vehicles are used as required., • Travels 1 – 2 times per year for company provided training., • May be required to travel up to five consecutive days., • May serve rotational 24-hour emergency on-call., • Possible Work Hazards: May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.Qualifications Education/Experience/Background: • High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions., • Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals., • Experience using material handling equipment, pressure gauges and precision measuring instruments., • Ability to perform basic mathematical calculations., • Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment., • Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action., • Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC., • Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals., • Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily., • Minimum water/wastewater license as required by regulatory agency at site., • Must possess a valid driver’s license and a safe driving record., • Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training., • HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification if required by site. Obtain and maintain minimum water / wastewater operator state certification., • Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.), • Forklift Certification if required by site., • Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics and control systems., • Obtain HVAC, Electrician, Plumber’s or other trade License if assigned to that area. Note: Tech will not perform duties unless properly licensed., • Training in the use of energy management systems as needed., • Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications., • Amount of time spent – Standing 25%, Walking 75% for as many as five miles per shift., • Requires close visual and hearing observation to detect non-conformance and machine malfunction., • Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms., • Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds., • Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet., • Occasional stooping, bending or kneeling and entering confined spaces. Additional Information Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionOn-Site Duties Site clean-up includes coming in behind different subcontractors to clean up their messes and prepping the area for the next subcontractor. For example, once the flooring contractors complete their work, clean-up workers get the property ready for the painters, cabinetry workers or whichever subcontractor is coming in next. Cleaning up on site includes properly disposing of any debris and trash. Often, the clean-up worker will do a walk-through with the contractor to get an idea of exactly what the contractor expects and to receive any special clean-up instructions. The clean-up worker’s supervisor, or the worker himself, if he is an independent contractor, often follows up with the contractor to confirm that the clean-up job met expectations. MUST BE ABLE TO PASS DRUG TEST Felons are encouraged to apply! Powered by JazzHR sMJPEnvnJ1

Job DescriptionJob Description: To ensure efficient daily operations of the grounds, buildings, equipment and inventory. Duties could include timely scheduling of vendors and quality of work performed. Purchasing and Budget control under the supervision of the Property Manager Primary Duties and Responsibilities: Responsibilities are to include the following but are not limited to the job functions as outlined below. Additional tasks may be assigned as deemed necessary to the productivity of the site and management company. • Maintenance of all inventory and equipment., • Upkeep of exterior building and to maintain proper repair., • Responsible for insuring OSHA (Occupational Safety & Health Act) standards and company safety policy are complied with at all times., • Timely Response to service requests, Market Readies, etc., • Scheduling and performing preventative maintenance., • Maintenance of all required logs for OSHA, snow removal, preventative maintenance and all other forms as dictated by the Employee Policy and Procedures book., • Must be available to work on-call., • Responsible for Installation of all appliances and warranty assurance as dictated., • Installation or repair of all plumbing., • Must have the capability to perform routine electrical repairs., • Responsible for all items and repairs as needed at turnover as required on the Apartment Inspection form., • Must be HVAC Certified., • Responsible for all duties necessary for maintaining HVAC equipment., • Reporting of any unusual or extraordinary circumstances regarding property, employees or residents., • Seasonal cleaning and upkeep of the pool and decking., • Must maintain the required property uniform and always ensure a professional appearance., • Must be always courteous to internal and external clients., • Snow Removal as weather dictated., • Help Community Manager with review of all Maintenance personnel as needed., • Clean grounds and remove litter., • Responsible for thorough knowledge of all Management Company and policies and procedures., • Maintain positive and courteous relations with internal and external clients at all times. Education and/or Experience: High school diploma or general education degree (GED) or one to two years related experience and / or training, or equivalent combination of education and experience. Certificates, licenses, Registrations: Heating, ventilation and air conditioning certification (EPA Certification) is required for this position within 6 months of hire (paid by the company). Certified Pool Operator certificate is preferred but not required if the community has a pool. Powered by JazzHR XBFIqi3ShA

Job DescriptionDescription: Performance Kings Honda seeks professionals with the title of Experienced Express Lube Technician! This position is not entry-level. Your responsibilities will include essential maintenance tasks such as oil changes, tire rotations, mounting and balancing tires, brake replacements, coolant flushes, belts, sway bar links, shocks, and struts. Don’t settle for less—apply today! • $34,000.00 - $41,000.00 Per Year (Experience-based), • $2,500.00 Sign-on Bonus (Experience determined by hiring manager), • You Choose - Flat Rate or Hourly Why Choose a Career With Performance Kings Honda? • Quarterly corporate bonus programs!, • We have Full-Time Automotive Instructors to continuously help improve your skill level, • Toolbox provided, • The Service Shop is climate-controlled, • Well-lit and clutter free workplace, • Work uniforms are provided, • Technician locker room, • BRAND NEW Fully equipped Technician break room, • Newly remodeled facility, • Paid time off, • 401k retirement plans With Generous Company Match!, • Medical insurance, • HSA or FSA plans, • Dental care, • Vision coverage, • Short- and long-term disability, • Life insurance, • Generous employee discounts on vehicles, parts, and services, • Take advantage of our Technician Tuition Assistance Program!, • Now open, "Performance Tech Academy" Earn while you learn!Requirements: Responsibilities: • Capable of performing lubrications, oil changes, maintenance, tire services, inspections, and other essential care, • Able to complete repairs and replacement of brakes, engine coolant, belts, sway bar links, shocks and struts, ball joints, • Precisely communicate needed repairs to Service Advisor, • Addressing fellow teammates and customers with patience and respect, • Always maintain a professional appearance, • Taking directions and mentoring from others, • Participate in progressive training programs, • Maintain store cleanliness, • Promote a safe work environment, • Assist in maintaining store equipment and tools, • 1-2 years of practical experience is preferred, • 1-2 ASE Certifications preferred but not required, • Completion of an automotive technology course is a plus, • Strong problem-solving skills, • Ability to communicate well with others, • Driver's license with a driving record that will allow you to drive customers and company vehicles, • Performance Kings Honda is a drug-free workplace.

Job Description Environmental Enterprises, Inc. is a specialty environmental management and disposal company. We are dedicated to protecting the environment by providing quality environmental services, recycling options, and waste disposal at competitive rates through innovative technologies and superior technical support. We are currently looking to fill the challenging and rewarding position of Chemical Treatment Technician. We are seeking dependable individuals with strong work ethic, willingness to learn and take initiative. Full time benefits include: • Excellent health coverage, dental, vision, life and disability insurance, • Paid vacation & sick time, • Six paid holidays, • 4o1(k) match, • Paid company provided training. Load, unload, process hazardous and nonhazardous chemical waste materials at a permitted waste treatment facility independently or with supervision. PHYSICAL DEMANDS (non-inclusive): This position is physical in nature and requires: walking, standing, climbing, bending, reaching, lifting (up to 70 pounds), carrying, pushing/pulling, and twisting. This position involves working with and around chemicals & environmental contaminants. Work is performed in outdoor and indoor environments and workers are subject to heat and cold while donning required PPE. At times, the technician may be required to wear a respirator, supplied air and full protective suit. DETAILS OF ASSIGNMENT: • Processing of hazardous chemical waste safely in accordance with company procedures and EPA, DOT and OSHA regulations, • Moving drums, including safe operation of a fork truck, • Utilize barcode system to Review laboratory data to determine proper handling and disposal of materials, • Responsible for keeping operating areas, walls, pipes and floor in a clean and safe condition, • Perform chemical compatibility checks to prevent reactions and other issues, • High school diploma or equivalent, • One year applicable experience, • 24 or 40 Hour Hazwoper certificate preferred

Job Description Rite Rug Flooring has been one of the top privately owned flooring companies, since 1934! We are looking for a motivated, detail oriented, Order Processor to join our team! If you are looking for a company where you are part of family, then Rite Rug is the place for you! $42,000 to $48,000 a year. Salary based on experience. Job Summary: To enter and order new home selections for installation. Manage accounts to ensure that builder install schedules are met. Essential Duties and Responsibilities include the following: • Entry of new selections, • Order material for installs, • Ensure billing is correct, • Process change orders, • Maintain files, • Order job finishes, • Perform other duties as assigned, • Scheduling of installs, • Enter service work orders, • Have earned a minimum of a High School Diploma or equivalent., • Flooring experience preferred and experience with RFMS is highly preferred., • Possess and have demonstrated proficient computer experience in Microsoft Office., • Be able to multi-task and prioritize the duties required., • Exhibit effective oral and written communication skills #ZR Company DescriptionTrusted Name in Flooring Since 1934! From a modest store on the corner of Cherry and High Streets in Downtown Columbus, Ohio, Rite Rug Flooring has expanded to become one of the largest flooring retailers in the United States. With three different divisions in 16 states, we are able to service all types of customer. Over 80 years we are still a family-owned business operating by the same values on which we were founded — offering the best products at competitive prices, with a staff of friendly, knowledgeable experts.Trusted Name in Flooring Since 1934!\r\n\r\nFrom a modest store on the corner of Cherry and High Streets in Downtown Columbus, Ohio, Rite Rug Flooring has expanded to become one of the largest flooring retailers in the United States. With three different divisions in 16 states, we are able to service all types of customer. \r\n\r\nOver 80 years we are still a family-owned business operating by the same values on which we were founded — offering the best products at competitive prices, with a staff of friendly, knowledgeable experts.

Job Description SUMMARY An Optometric Technician is a valuable asset to an optometrist as they assist in providing a world class Total Patient Experience. This team member is able to handle a wide range of duties while using optical equipment to perform the initial testing needed to prepare a patient for an exam with an Optometrist. Location: 3308 Jefferson Ave, Cincinnati OH ESSENTIAL DUTIES AND RESPONSIBILITIES • Embrace and execute our Total Patient Experience to build relationships with all patients while delivering great medical support, • Comply with all company policies and procedures including HIPAA, • Practice urgency at all times placing value on a patient's time, as well as the doctor's time and schedule, • Operate manual lensometer, auto-lensometer, autorefractor/keratometer, retinal camera, visual field, GDX or OCT, • Follow scripting for testing equipment (photos, visual fields, visual activity, etc.), • Clean all examination equipment including tonometer tip, • Ability to interact with all levels of employees in a courteous, professional manner at all time, • General office duties and cleaning to be assigned by manager, • Consistently creating a positive work environment by being team-oriented and patient-focused, • Previous medical office experience preferred; previous ophthalmic experience strongly preferred., • Minimum of 1 year in a position interacting with customers/patients or the equivalent combination of education and experience, • Favorable result on background check as required by state EyeCare Partners is an equal opportunity/affirmative action employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. NOTE: Job descriptions are intended to be accurate reflections of those principal job elements essential for making fair pay decisions about jobs. Nothing in this job description restricts management right to assign or reassign duties and responsibilities to this job at any time.

Job Description Inloes Mechanical INC. We have been providing commercial installations of the newest and most energy-efficient HVAC systems available, routine maintenance of HVAC systems, and fast expert HVAC repair, since 1979. We are Hiring a Commercial HVAC Mechanic. Position Overview: This position will be proficient in installing, start-up and troubleshooting of VRF systems and other commercial HVAC equipment. We offer 4/10 work schedule, and stable, year-round work opportunities working on New Construction and large Remodel jobs throughout Indiana, Ohio, and Kentucky. Willingness to travel Monday through Thursday, home Thursday evenings through Sunday. Benefits: • Medical insurance 70%- 90% employer paid coverage, • 6 paid holidays, • Paid time off, • IRA up to 3% match, • Company Uniform Location: Cincinnati, OH Pay: Starting at $30.00 PLUS per hour, we pay based on experience Work Schedule: 4/10's, Monday through Thursday, 7:00am to 5:00pm. Traditional 5/8hrs schedule available. Overtime available What you will be doing: • Commercial new construction installs, • Installing VRF Systems, • Gas pipe & refrigerant pipe, • Brazing & soldering, • Duct install, • Using RLS press fittings, • Fabrication of transitions, • Pressure testing & evacuation, • 3+ years' experience in commercial HVAC installation, • Experienced installing VRF Systems, • Proficient in installing Gas Pipe, • Proficient in installing Refrigeration Pipe, • Start up of equipment and troubleshooting, • EPA Certification, • Sheet metal fabrication experience for on-site transitions, • Proficient in all HVAC functional design and installation of ductwork systems, • Read and interpret wiring diagrams and blueprints, • Able to lift up-to 50 lbs., • High school diploma or its equivalent, • Valid driver's license & insurable driving record

Job Description EyeCare Partners is the nation's leading provider of clinically integrated eye care. Our national network of over 300 ophthalmologists and 700 optometrists provides a lifetime of care to our patients with a mission to enhance vision, advance eye care and improve lives. Based in St. Louis, Missouri, over 650 ECP-affiliated practice locations provide care in 18 states and 80 markets, providing services that span the eye care continuum. For more information, visit . SUMMARY An Optometric Technician is a valuable asset to an optometrist as they assist in providing a world class Total Patient Experience. This team member is able to handle a wide range of duties while using optical equipment to perform the initial testing needed to prepare a patient for an exam with an Optometrist. Location: 3308 Jefferson Ave, Cincinnati OH ESSENTIAL DUTIES AND RESPONSIBILITIES • Embrace and execute our Total Patient Experience to build relationships with all patients while delivering great medical support, • Comply with all company policies and procedures including HIPAA, • Practice urgency at all times placing value on a patient's time, as well as the doctor's time and schedule, • Operate manual lensometer, auto-lensometer, autorefractor/keratometer, retinal camera, visual field, GDX or OCT, • Follow scripting for testing equipment (photos, visual fields, visual activity, etc.), • Clean all examination equipment including tonometer tip, • Ability to interact with all levels of employees in a courteous, professional manner at all time, • General office duties and cleaning to be assigned by manager, • Consistently creating a positive work environment by being team-oriented and patient-focused, • Previous medical office experience preferred; previous ophthalmic experience strongly preferred., • Minimum of 1 year in a position interacting with customers/patients or the equivalent combination of education and experience, • Favorable result on background check as required by state EyeCare Partners is an equal opportunity/affirmative action employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. NOTE: Job descriptions are intended to be accurate reflections of those principal job elements essential for making fair pay decisions about jobs. Nothing in this job description restricts management right to assign or reassign duties and responsibilities to this job at any time.

Job Description Join TradeSource as a Journeyman Electrician in Cincinnati! Journeyman Electrician Job Overview TradeSource is hiring a Journeyman Electrician in the Cincinnati area! This full-time job pays up to $30 per hour. Your pay will depend on your experience and skills. Journeyman Electrician Benefits Along with a good salary, you will get great benefits! For instance: • Medical, Dental, & Vision Benefits, • 401(k) Plan with Company Match, • Overtime Pay and Weekly Paychecks, • Tool & Tuition Reimbursement and Safety Equipment To apply, you need at least 5 years of experience. You should also have skills in: • Bending and running conduit, • Pulling wire and installing lights, • Building switchgear and terminating connections, • Running cable trays and fixing electrical systems, • Bringing your own tools to work If you are a safety-focused electrician, then we want to hear from you! We value team players who like to work together. Unquestionably, your skills and input matter here. TradeSource knows the challenges you face in your career. With years of experience in construction, in short, we know how to help you succeed. We have strong ties with clients, so we can connect you with the right jobs. We can also help you grow your career and make a real difference in the industry. So, let us help you find your next great job! Apply Now! If you are ready to take the next step, then please apply now for immediate consideration! Company DescriptionTradeSource has been in the construction industry for over 25 years and we take pride in helping construction workers grow their careersTradeSource has been in the construction industry for over 25 years and we take pride in helping construction workers grow their careers

Job DescriptionCompany Name: Oak Hills Carton Co. Position: General Laborer - Production Location: Cincinnati, OH About The Role We’re seeking a motivated General Laborer to join our production team! This role is responsible for the “Scrapping” process of removing excess paperboard from products such as folding cartons and air filter frames. If you enjoy working with your hands and take pride in accuracy and quality craftsmanship, we would like to meet you! Schedule • 10-hour shifts, 4 days per week, Monday - Thursday, 5:00 am – 3:30 pm., • Occasional overtime on Fridays., • No weekendsBase Starting Wage: $14/hour What You’ll Do • Remove excess paperboard from die-cut items using air and manual scrapping hammers, • Inspect products for accuracy, quality, and proper scoring, • Use a manual pallet jack to move die-cut loads to the scrapping area, • Prepare finished skids for gluing or shipping, • Strong attention to detail and quality, • Active listening and teamwork, • Ability to work independently, • High School Diploma or G.E.D., • Ability to stand, bend, and lift (up to 50 lbs), • We provide full training – manual pallet jack experience is a plus, • Able to work in a non-climate-controlled environment, • Health, dental, & vision insurance, • Life insurance & long-term disability, • 401(k) plan with employer match, • Paid time off & paid training Apply today and start building your career with Oak Hills Carton Company! We Make it Easy Founded in 1901, MRA is a nonprofit employer association that serves more than 4,000 employers, covering more than one million employees. As one of the largest employer associations in the nation, MRA helps its member organizations thrive by offering the most comprehensive assortment of HR services, information, education, and resources to help build successful workplaces and a powerful workforce. We partner with these companies working directly with their HR department and leadership to hire their talent. We are a direct line to the company, not an agency recruiter. Powered by JazzHR 0pU0HqPvI7

Job DescriptionBenefits: • Bonus based on performance, • Dental insurance, • Health insurance, • Paid time off, • Training & development What does a Emergency Services Technician with Paul Davis do? • Serve others within your community in their time of need, • Make a difference for others that have had a disaster strike their property, • Work hard and take pride in completing water and fire mitigation projects, • Be empathetic and show a sense of urgency while communicating through modern technologyRole on the Team (Job Responsibilities):, • High level of performance in water and fire mitigation, tarping, board up, and mold remediation, services according to Paul Davis and industry specifications., • Achieve jobsite expectations with other team members onsite., • Complete documentation and report back to project managers., • Focus and dedication to providing excellent customer service., • Maintain a clean, properly stocked and organized truck and maintain all company equipment., • Be accessible by phone and participate, as necessary, in the on-call schedule., • Assist in warehousing and facility related tasks when necessary., • You will assist other team members as you see opportunities arise and be a leader for the team when needed.Team Compensation and Benefits:, • Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities, • Monthly cross-training opportunities to advance your career, • Flex schedule - at Paul Davis we are committed to our team and their well-being. We have instituted the ability for flex hours that ensures team members get the time they need for personal matters while still being able to work full time., • Paid training, • Health, dental and vision insurance, • Bonus program for performance, • Referral bonus program, • Great culture and team dynamic, • Desire to join a world-class team and contribute a positive attitude, • Dedication to customer service, • Fluent in English, • Clean criminal background check, • Ability to pass a drug test, • Valid driver's license with a clean record, • Have the ability to work nights/weekends and overtime, if needed, • Ability to lift 75 LBS frequently Built upon principles of customer service, dynamic decision-making and leadership, we have the tools to continue our rapid growth. Our team puts emphasis into living our Vision, Mission and Values to be more than just a service provider our Mitigation Technicians are on the front lines of restoring their communities by being first on site after disasters strike (i.e. floods, fires) and will be leading the mitigation effort to restore the property. Please apply if you think you have what it takes to serve others and deliver a world-class service when others need it the most. We are looking forward to discussing this opportunity with you. We support and hire Veterans and we are an Equal Opportunity Employer!

Job Description The below Job Description is intended to describe the general nature and level of work being performed by associates assigned to this job. It is not an exhaustive list of responsibilities, and is subject to changes and exceptions at the discretion of senior management. JOB TITLE: Optometric Office Technician / Medical Office Administrator REPORTS TO: Store General Manager FLSA STATUS: Hourly; Non-Exempt POSITION PURPOSE: The major responsibility of the Optometric Office Technician is to assist the Managing Optometrist in the technical and administrative operation of an optometric practice. The position will interact with patients/customers by delivering an exceptional patient/customer experience, foster patient/customer retention, and promotes outstanding associate/doctor satisfaction. OPTOMETRIC OFFICE TECHNICIAN The Optometric Office Technician plays a key role in the optometric practice. Their duties may include the utilization of computerized medical office software, administrative office procedures, health insurance processing billing and transcription of medical reports. An Optometric Office Technician role may combine skills of a medical office administrator, medical billing and collections, appointment scheduler or medical records clerk and direct patient care. ESSENTIAL DUTIES AND RESPONSIBILITIES: Clinical Duties • Taking patient medical histories, • Preparing patients for examinations, • Administering tests prior to the eye exam, • Assisting doctors during examinations, • Assist with ordering glasses and contact lens supply Administrative Job Duties • Greeting and directing patients, • Answering telephones, • Updating and maintaining Electronic Medical Records, • Obtaining insurance verification and authorization, • Adjust scheduling for priority patients, • Scheduling appointments, • Processing insurance claim forms, • Patient and insurance billing, • Optometric medical billing and coding, • Vision insurance billing and coding, • Accounts receivable and accounts payable, • Bookkeeping TRAVEL REQUIREMENTS: • Ability to provide enthusiastic and concise communication to meet/exceed customer expectations as well as foster positive and results-oriented associate, doctor and host relationships., • Ability to manage priorities through adaptability, willingness to take calculated risks, and follow-up., • Experience with personal computers preferred., • Valid State Driver’s License and State Minimum Insurance coverage., • High school diploma or equivalent, or comparable experience typically achieved with a minimum of 1-2 years in a retail setting.

Job Description Rite Rug has been one of the top, privately owned flooring companies, since 1934! We are looking for a motivated, detail oriented, Account Coordinator to join our team! If you are looking for a company where you are part of family, then Rite Rug is the place for you! $40,000 to $42,000 based on experience! Job Summary: Employee will enter and order new home selections for installation. Manage accounts to ensure that builder install schedules are met. Essential Duties and Responsibilities include the following: • Confirm all material is in warehouse for install and services, • Maintain files, • Request any job finishes, • Communicate efficiently with Account Manager and Construction Mangers, • Perform other duties as assigned, • Confirm scheduling of installs, • Perform Pre and Post walks of installs and services, • Schedule services with homeowners/builders Qualifications and Requirements: 1. Have earned a minimum of a High School Diploma or equivalent., 2. Possess and have demonstrated proficient computer experience in Microsoft Office, 3. Be able to multi-task and prioritize the duties required. Must be able to pass background check and drug test 4. Exhibit effective oral and written communication skills. #ZR Company DescriptionTrusted Name in Flooring Since 1934! From a modest store on the corner of Cherry and High Streets in Downtown Columbus, Ohio, Rite Rug Flooring has expanded to become one of the largest flooring retailers in the United States. With three different divisions in 16 states, we are able to service all types of customer. Over 80 years we are still a family-owned business operating by the same values on which we were founded — offering the best products at competitive prices, with a staff of friendly, knowledgeable experts.Trusted Name in Flooring Since 1934!\r\n\r\nFrom a modest store on the corner of Cherry and High Streets in Downtown Columbus, Ohio, Rite Rug Flooring has expanded to become one of the largest flooring retailers in the United States. With three different divisions in 16 states, we are able to service all types of customer. \r\n\r\nOver 80 years we are still a family-owned business operating by the same values on which we were founded — offering the best products at competitive prices, with a staff of friendly, knowledgeable experts.

Job Description To be successful as a Cleaner, you should be able to complete assigned tasks within the stipulated period. Ultimately, a top-performing Cleaner should be physically fit and able to perform with minimal supervision. Cleaner Responsibilities: • Vacuuming, sweeping, and mopping floors of various types., • Dusting ceilings, light fittings, countertops, and loose furniture., • Scrubbing and sanitizing toilets, sinks, and kitchen fixtures., • Emptying trash cans., • Washing and drying windows. Powered by JazzHR l2us0xX3bZ

Job Description Position Overview A well-established provider of precision CNC machine tools and automation systems is seeking a Senior Service Technician to support customers in the field. This role involves hands-on installation, troubleshooting, maintenance, and repair of CNC machinery, as well as mentoring junior technicians and ensuring top-tier customer support. The ideal candidate is a highly skilled technician with strong electrical and mechanical capabilities, extensive CNC experience, and a passion for solving complex machine issues. This position requires frequent travel to customer sites and a commitment to technical excellence and safety. What We Offer • Long-term organizational stability and continued growth, • Competitive compensation, • Comprehensive benefits including:, • Medical insurance, • 401(k), • Paid vacation and holidays, • Sick leave, • Tuition assistance Key Responsibilities Requirements & Qualifications • Strong knowledge of CNC machinery operation, electrical schematics, and mechanical systems, • Proficient in troubleshooting and programming control systems: Fanuc, Siemens, Mazak, Heidenhain, • Familiarity with servo motors, drives, PLCs, and industrial automation, • Experience with laser calibration, ball bar testing, and precision alignment, • Excellent communication skills for customer interaction, documentation, and team collaboration, • Proven ability to mentor and lead field service projects Education & Experience • Associate’s or Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering, or equivalent hands-on experience, • 8–10 years of experience in CNC service and repair, with a strong focus on diagnostics and troubleshooting, • Solid electrical background with the ability to read and interpret schematics and technical drawings, • Experience training customers on machine operation and maintenance Travel Requirements • Up to 50% travel, including overnight stays as required, • Frequent visits to customer sites within assigned territory, • Must have reliable transportation and a clean driving record Physical Requirements • Ability to lift up to 50 lbs, • Comfortable performing physical tasks including bending, twisting, crawling, and climbing step ladders (up to 8 feet), • Capable of driving to job sites daily

Job DescriptionSalary: $19-$25+ Emergency Medical Technician (EMT) Ohio Ambulance Solutions, LLC Cincinnati, OH Starting Pay: $19$24+ per hour (based on experience and certification) Shifts: Flexible scheduling available Job Type: Full-time and Part-time You work hard your employer should, too: At Ohio Ambulance Solutions, we know our employees are the heart of what we do thats why we offer flexible scheduling, top-of-the-line equipment, real opportunities for growth, and some of the best pay and benefits in the region. Our leadership team understands that our employees are our productwe take care of you, so you can focus on taking amazing care of your patients. Emergency Medical Technicians (EMTs) at Ohio Ambulance are tasked with treating and transporting a diversified population of individuals with some of the most severe chronic and acute health conditions. From Pediatrics to Geriatrics, from Oncology to Neurology, and from local transports to long-distance trips, our EMTs experience one of the broadest spectrums of healthcare services of any career in the field. If youre looking to strengthen your clinical skills while making a real difference in peoples lives, this is the perfect place to grow. What Youll Get: We believe in rewarding the people who make our mission possible. Ohio Ambulance employees enjoy: Competitive Pay & Shift Differentials • Typical starting range: $18$24+ per hour, depending on experience and certification, • Shift differentials for:, • 3rd shift, • Early morning shifts, • Event shifts, • Weekends (beginning Friday evening), • Flexible Schedules, • We operate 24/7 with a variety of shift options, including 8s, 10s, 13s, and 16s, • Build a schedule that fits your work/life balance and personal goals Top-of-the-Line Equipment & Support • Newer, well-maintained fleet with in-house mechanics and porters to keep vehicles safe and reliable (and to get you home earlier!), • Stryker XPS and Ferno power cots, • LifePak 15s, iPads, and smartphone radios, • Mounted devices for safe, hands-free use while on the road Training, Growth & Career Development • Comprehensive orientation and field training programs for new EMT graduates, • Career advancement opportunities, including our Field Training Officer (FTO) program, • Leadership training and continuing education opportunities, • Tuition assistance and reimbursement available Excellent Benefits • Paid Time Off (PTO)ANDPaid Sick Time, • Medical, dental, and vision coverage, • Health Savings Account (HSA), • 401(k) with company match, • Disability, accident, hospital indemnity, and life insurance, • Paid holidays (including your birthday!), • Employee Assistance Program (EAP), • Free access to confidential services for mental wellness, financial guidance, and physical health, • Gym membership discounts, • Access to an Employee Discount Center offering savings on food, travel, entertainment, retail, and more What Youll Do: • Provide safe, professional, and compassionate patient transport services, • Communicate effectively with patients, families, dispatch, and healthcare partners, • Maintain accurate trip documentation and patient care reports, • Operate ambulances and wheelchair vans in compliance with safety and traffic regulations, • Assist with patient movement, equipment setup, and ensuring comfort at every destination Who You Are: • A current Ohio EMT-B, AEMT, EMT-P, or actively enrolled in school, • Passionate about helping people and providing exceptional care, • Responsible, dependable, and eager to learn, • A team player who values professionalism and empathy New Graduates Welcome! We provide comprehensive orientation and field training for recent EMT school graduates. Youll be paired with a Field Training Officer who will ensure youre confident and comfortable in your role before working independently. Join a company that puts people firstour patients and our employees. If youre ready to build a meaningful career with a team that supports your growth and values your dedication, apply today and become part of the Ohio Ambulance family. Equal Employment Opportunity (EEO) Statement Ohio Ambulance Solutions, LLC is an equal opportunity employer. We are committed to ensuring equal employment opportunities for all qualified individuals without regard to race, color, religion, national origin, sex, age, disability, sexual orientation, or any other characteristic protected by applicable law. This commitment extends to all aspects of the employment relationship including recruitment, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. If you require reasonable accommodation to complete the application process or to participate in an interview, please let us know. We strive to create a diverse and inclusive work environment that reflects the communities we serve. Our dedication to equal opportunity is an integral part of our daily operations and decision-making processes. We value the diversity of our workforce and respect the dignity of every individual. We encourage everyone to apply to join our team. Emergency Medical Technician (EMT) Job Summary As an EMT with Ohio Ambulance Solutions, you will provide emergency and non-emergency medical care and transportation in accordance with all applicable federal, state, and local laws, regulations, and company policies. You will represent our organization with professionalism, compassion, and respect while delivering high-quality patient care. Essential Duties and Responsibilities • Respond promptly and safely to emergency and non-emergency calls., • Assess, treat, and transport patients in accordance with established medical protocols and Ohio Ambulance Solutions policies., • Communicate effectively with dispatchers, medical personnel, and treatment facilities., • Operate and maintain ambulances and medical equipment safely and in compliance with all standards., • Complete all required reports, including patient care and insurance documentation, accurately and in a timely manner., • Maintain readiness by restocking, cleaning, and inspecting vehicles and equipment. All employees must comply withHIPAAand Ohio Ambulance Solutions Privacy Policies: • Access and share patient information only as needed to perform job duties., • Protect all patient information and report any privacy concerns immediately., • Current State of Ohio EMT Certification (or higher)., • Valid drivers license with an acceptable driving record., • Current CPR certification (AHA or Red Cross)., • EVOC/EVDT and Hazardous Materials Operations certifications preferred., • Must be able to lift and carry up to150 lbswith assistance., • Frequent standing, bending, kneeling, and working in varied environments and weather conditions. Work involves exposure to illness, bloodborne pathogens, adverse weather, and physically demanding conditions. Reasonable accommodations may be made for qualified individuals with disabilities. Disclaimer This job description reflects general duties and responsibilities and is not a comprehensive list of all functions. Ohio Ambulance Solutions may modify duties or assign new tasks as needed. This description does not constitute a contract of employment.

Job Description Job Summary: We are seeking a skilled CNC Vertical Milling Machine Operator to join our small metal fabrication team on 2nd Shift. This position involves setting up and operating CNC vertical milling machines, cutting material to length using a saw when necessary, and performing per-part inspections to ensure quality standards are met. The ideal candidate will be detail-oriented, mechanically capable, and committed to maintaining production accuracy. Key Responsibilities: • Set up and operate CNC vertical milling machines according to technical drawings and job specifications., • Perform material preparation tasks, including using a saw to cut material to length as required., • Conduct per-part inspections using precision measuring tools to ensure accuracy and quality standards., • Maintain and perform routine maintenance on CNC machinery and equipment., • Follow safety protocols and ensure proper use of personal protective equipment (PPE)., • Previous experience operating CNC milling machines preferred., • Ability to read and interpret technical drawings and blueprints., • Familiarity with precision measuring tools such as calipers and micrometers., • Strong mechanical aptitude and attention to detail., • Basic computer skills for job tracking and data entry., • Physical stamina and ability to lift up to 50 pounds., • Competitive hourly wage based on experience., • Opportunities for skill development and advancement., • Paid time off and holidays. qlmiOtt1R6

Job DescriptionSalary: Salary range $41,600-54,000 Emergency Medical Technicians (EMTs) at Ohio Ambulance are tasked with treating and transporting a diversified population of individuals with some of the most severe chronic and acute health conditions. From Pediatrics to Geriatrics, from Oncology to Neurology, from Local to Long Distance travel, our EMTs experience some of the broadest spectrums of health care services of any career. COMPENSATION Full-Time EMTs receive premium earning potential by stacking our hourly base rates, with additional compensation for past experience and availability. Part-Time and PRN EMTs can also maximize hourly rates by adding high demand shifts with pay differentials to their weekly schedules. Salary range is from $41,600- $54,080 Rates. Looking to earn more? We have generous shift diffs!!! Contact us for an interview! BENEFITS~ Accelerated PTO based on hours worked. All major Holidays are paid, including Birthdays and Veterans Day for all Veterans. Employee sponsored medical, dental, & vision coverage available for singles, parents, and families. Health Savings Accounts, Voluntary Life Insurance, Supplemental Disability and Accidental Insurance, 401K, EAP benefits and Financial Wellness Services provided by KeyBank. Free con-ed opportunities are also available. CULTURE~ Ohio Ambulance has a long reputation for always putting our staffs needs and values above all else. All operations are conducted with the philosophy that nothing is more important than taking care of those who take care of others. 2nd Generation, Family owned and operated with over 50 years of experience. WORK ENVIRONMENT~ For EMTs, this involves a fleet of Ambulances of the transit and box varieties, with the best equipment and resources available. Ohio Ambulance believes in providing EMTs with whatever it is they need to deliver quality patient care and excellent customer service. Preserving the image of the Company and the EMT is equally important. SAFETY~ The safety of our staff and passengers never takes a backseat. For this reason, each Ambulance is fitted with Lifepak 15s, M-Series Zolls, or Philips Heartstart AEDs as well as handheld waveform capnography devices, automatic BP cuffs, and temporal thermometers. Every Ambulance is equipped with Power Cots, either Stryker XPS or Ferno Power X1. All patient documentation is logged and reported in our ePCR software provided by HealthEMS. Verizon smart phones are secured to onboard dash-holders while interfacing with our Traumasoft CAD system to provide upcoming trip information silent dispatching, and navigation with ease. NAUTO drive cam A.I. Stair chairs, Reeves stretchers, and manual lift-assists are always on-hand for the more difficult moves and transfers. Antimicrobial dome lighting is available in every patient compartment of our vehicles to continually disinfect surfaces and hard to reach crevices for additional safety and infection control. Medical Direction and Clinical Protocols provided by UH EMS Institute. On-site Mechanics are available weekly to provide timely repairs, PMs, to company vehicles, and employee vehicles when time permits. Porters are also provided throughout the workweek to take over the Ambulances at the end of shifts to provide deep cleaning and detailing while the hardworking EMTs are free to go about their day or evening. EDUCATION AND CERTIFICATION REQUIREMENTS~ • State of Ohio EMT Certification, • BLS Healthcare Provider Certification Ohio Ambulance Solutions, LLC is an equal opportunity employer. We are committed to ensuring equal employment opportunities for all qualified individuals without regard to race, color, religion, national origin, sex, age, disability, sexual orientation, or any other characteristic protected by applicable law. This commitment extends to all aspects of the employment relationship including recruitment, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. If you require reasonable accommodation to complete the application process or to participate in an interview, please let us know. We strive to create a diverse and inclusive work environment that reflects the communities we serve. Our dedication to equal opportunity is an integral part of our daily operations and decision-making processes. We value the diversity of our workforce and respect the dignity of every individual. We encourage everyone to apply to join our team. Together we can take the Ambulance experience to a new level. Apply online @ Ohio Ambulance Solutions LLC. Is an equal opportunity employer.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Opportunity for advancement, • Placement Bonus, • Performance pay, • Hourly pay (ALL Hours) + Daily Performance Bonus + Tips, • Paid time off, Health Reimbursement, 401k with employer match, • Opportunities for future advancement as team leaders, trainers, managers, and branch owners, • Paid on-the-job training, • 8-5pm Monday-Friday Schedules - reliable hours, Overtime hours available on nights and weekend if desired, • Reliable company vehicles, • All-natural cleaning products that are healthy for you to use on a daily basis, • Company supplied High-quality cleaning equipment and supplies including laundry service, • Employer-paid taxes and insuranceYou May Be A Great Fit If:, • You have a customer service background such as CNA & Senior Caregiver, or are service-minded, • You have a transportation background as a driver with Uber, Lyft, or other delivery company (i.e. Ubereats, DoorDash, Postmates), • You enjoy working in the service industry whether that's restaurants or entertainment (i.e. bartender, server, barista, retail cashier, etc.), • You have experience as a custodian, janitor, housekeeping, warehouse, or in assembly and enjoy a dynamic, team environmentWe are looking for team members that thrive on customer happiness, display good teamwork and take pride and satisfaction in a job well done. This is a great potential fit for those with service backgrounds looking for entry level opportunities with little to no experience needed. If this is you, come join our team!

Job Description As one of the nation’s largest single-source providers of construction contract labor, Commercial Trade Source (CTS) is currently expanding our field team by accepting applications for electricians in the Cincinnati, OH area. Along with steady work year-round, we also offer. • Health / Dental Insurance., • 401K / Paid Holidays / Vacations., • Overtime Opportunities., • Prevailing Wage Opportunities., • Paid Apprentice Programs., • Continued Safety Programs., • Tool Purchase Programs., • Safety Education Programs CTS is the partner-of-choice for many of the top construction companies across the United States. CTS not only partnered with some of the industry giants, but also supports small and medium businesses across the country from our different regional offices. CTS is a family-owned company, and our primary goal is building lasting relationships — with contractors, industry partners, and our employees. CTS has been long considered to be one of the most successful construction contract labor companies in the nation. CTS has been awarded by the Associated Builders and Contractors with prestigious Trolson Image Award, and has also been selected as a top place to work in 2020 and 2021. Due to its dedicated staff and strong field team, CTS has built a strong reputation and an extensive network of contractor relationships that keeps our field team employed all year long. Responsibility: Responsibilities of the electrician include, but not limited to: • Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes., • Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels; installs Buss, Busbar, electrical feeders power systems and/or switchgear., • Connect electrical power to commercial and industrial equipment., • Determine wiring layouts., • Follow electrical code manuals to install and repair electrical systems., • Install brackets and hangers., • Bending, threading and installing conduit., • Install, replace and repair electrical equipment., • Pulling and installing wiring throughout structures., • Test continuity of circuits with test equipment., • Troubleshoot faults in electrical systems., • Perform all other electrician duties and maintain clean and orderly work area. Qualifications: We are looking for those team members that possess the following traits: • Must have commercial electrical experience., • Experience working with hand tools, power tool and electronic test equipment., • Expected to be able to work independently and with others depending on scope of work., • Ability to communicate effectively with team and other field employees., • Must be able to perform general physical activities common to the electrical trade., • Strong attention to detail while producing accurate and high-quality work., • Conceptualize concepts easily and visualize potential outcomes., • Knowledgeable about technological developments., • Great attitude., • Reliable., • Productive., • Committed to safety., • Committed to being drug free., • Valid driver’s license with transportation. Job Benefits: Along with being one of the most reliable sources for steady construction employment, we also provide: • Health Insurance., • Dental Insurance., • 401K., • Paid Holidays., • Paid Vacations., • Continued Safety Program., • Tool Purchase Program., • Safety Equipment. Contacts For further information, please contact CTS-Indiana at 317-377-1988 or apply online CTS-IN 3924 Pendleton Way Indianapolis, IN 46226 As an award-winning construction contract labor company, CTS is committed to finding innovative ways to continually improve. CTS creates a unique work environment by rewarding talent, celebrating diversity and encouraging forward thinking. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability status or any other characteristic protected by applicable law. Company DescriptionWe are firmly grounded on the fact that our field personnel are the face of CTS. It is with this understanding that we hold our employees to a very high standard. Along with an industry leading benefits package, our field team is always treated with the dignity and respect they and their families deserve. By joining the CTS team, you become a member of a time honored corps of the construction tradespeople. CTS recognizes the skills you have to offer as well as those skills that are in demand.We are firmly grounded on the fact that our field personnel are the face of CTS. It is with this understanding that we hold our employees to a very high standard. Along with an industry leading benefits package, our field team is always treated with the dignity and respect they and their families deserve. By joining the CTS team, you become a member of a time honored corps of the construction tradespeople. CTS recognizes the skills you have to offer as well as those skills that are in demand.

Job Description Experienced industrial electricians for project in Cincinnati, OH. Applicants should have minimum of five years industrial electrical experience. MUST be confident with bending conduit. Confident reading and interpreting blueprints (industrial electrical blueprints) Negative drug screen required. Applicants should have reliable transportation of their own and basic electrical hand tools and PPE (hard hat, safety glasses, reflective vest and work boots) E-Verify participating employer (Applicants should be LEGAL to work in the USA and have proper ID. Company DescriptionBased in Nashville TN, Trades Unlimited partners with and supports multiple electrical and mechanical contractors throughout the United States. Trades Unlimited has a focus on Safety and rewards field employees thru a work safe earn safety pay system. Trades Unlimited offers Medical, Dental and Vision plan. Also 401K available after 12 months.Based in Nashville TN, Trades Unlimited partners with and supports multiple electrical and mechanical contractors throughout the United States. Trades Unlimited has a focus on Safety and rewards field employees thru a work safe earn safety pay system. Trades Unlimited offers Medical, Dental and Vision plan. Also 401K available after 12 months.

Job Description Express Employment Professionals in Cincinnati, OH we are currently working with a Manufacturing Company that offers rewarding compensation and a competitive benefit structure. My client is located near Cincinnati, OH. My client needs an experienced Industrial Electrician due to growth! If selected, you will receive the following benefits: • Medical, Dental and Vision plans, • 401k Plan, • Install and maintain industrial electrical systems and machinery, • Troubleshoot and repair electrical equipment, motors, and control systems, • Read and interpret electrical blueprints and schematics My client is flexible on salary. They are focused on finding the right person for the position. If you are interested, please reply with your resume to discuss. Thanks, Express Team Company DescriptionExpress Employment Professionals is one of the top staffing companies in the U.S. and Canada. Every day, we help people find jobs and provide workforce solutions to businesses. Express has more than 900 franchise locations that provide a full range of employment solutions that include direct hire, full-time, temporary, and part-time employment in a wide range of positions, including Professional, Light Industrial, Skilled Trades & Office Services.Express Employment Professionals is one of the top staffing companies in the U.S. and Canada. Every day, we help people find jobs and provide workforce solutions to businesses. Express has more than 900 franchise locations that provide a full range of employment solutions that include direct hire, full-time, temporary, and part-time employment in a wide range of positions, including Professional, Light Industrial, Skilled Trades & Office Services.

Job Description About Us: We are a growing provider of pure drinking water and ice dispensing systems for commercial clients, including offices, medical centers, distribution centers, and manufacturing facilities. We’re looking for skilled technicians to join our team and help install and service our systems across multiple locations. Position Overview: As a Water & Ice Systems Technician, you will install, maintain, and service commercial water and ice systems. You will connect systems using food-grade flexible tubing, perform troubleshooting and repairs, and provide excellent service to our clients. Key Responsibilities: • Install and maintain water and ice dispensing systems at commercial sites, • Connect systems to water and drain sources using food-grade flexible tubing, • Troubleshoot, repair, and perform preventive maintenance on installed systems, • Safely operate scissor lifts, boom lifts, and other equipment as required, • Maintain company tools, equipment, and vehicles, • General handyman, plumbing, and electrical skills, • Ability to lift up to 95 lbs, • Valid driver’s license and clean driving record, • Comfortable operating scissor lifts and boom lifts, • Must pass a background check, • Competitive pay (based on experience), • Comprehensive training and ongoing support, • Company-provided service vehicle, phone, and tablet, • Health insurance and PTO PLEASE APPLY TO BE CONSIDERED ***As part of our hiring process, AND TO BE CONSIDERED IMMEDIATELY, please take a quick behavioral assessment. 2 Questions, a couple minutes. Please use this link to take the assessment: Company DescriptionHydrate HQ is the fastest growing B to B drinking water company in the USA. We provide a patented and exclusive bottleless purifier to commercial business and industry that our customers LOVE! This “high end” purifier is an alternative to obsolete 5-gallon bottle water coolers, cheap filter machines and antiquated water fountains. Over 8,000 companies have been enjoying our service and our business has doubled in the last three years. Companies are seeking clean, safe and touchless alternatives due to COVID-19 and we have the industry’s top solution to this problem.Hydrate HQ is the fastest growing B to B drinking water company in the USA. We provide a patented and exclusive bottleless purifier to commercial business and industry that our customers LOVE! This “high end” purifier is an alternative to obsolete 5-gallon bottle water coolers, cheap filter machines and antiquated water fountains. Over 8,000 companies have been enjoying our service and our business has doubled in the last three years. Companies are seeking clean, safe and touchless alternatives due to COVID-19 and we have the industry’s top solution to this problem.

Job Description MINIMUM QUALIFICATIONS: • 1-2 years of crane service technician or relevant trade experience (electrical, mechanical, etc)., • Must have strong verbal, written and interpersonal communication skills., • Demonstrate the ability to learn mechanical, electrical, and industrial skills., • Candidate must be willing to travel and work in production environments, with some overnight travel possible., • Ability to operate company phone and computer., • Ability to complete electronic forms in a timely manner., • Ability to work extended hours, and on holidays, as required., • PHYSICAL REQUIREMENTS:, • Ability to stand/walk 95% of the work day., • Lift /Carry up to 40-50 pounds unassisted., • Squat, twist, reach, climb, and bend frequently., • Ability to push/pull material with equipment assistance., • Possess hand/eye coordination and bilateral dexterity (gross and fine)., • Possess depth perception and peripheral vision., • Subject to working frequently at considerable heights., • Competitive pay, • Medical / Dental / Vision Insurance, • 401k plan with match, • Mandatory OT Saturdays, DT Sundays, OT after 8 on Weekdays, • Short and long-term disability insurance available, • Paid holidays, • PTO Program, • Boot StipendCompany DescriptionA high-growth overhead crane company, CraneTech is focused on becoming the best crane service provider in the nation measured by customer and employee satisfaction. The company is well-established, well-funded, and well-positioned to support sustained expansion while continuously delivering exceptional products and service. We are industry leaders with a unique culture that differentiates us from our competitors and other field service businesses. A values-driven meritocracy, we provide our team members with opportunities for personal and professional growth.A high-growth overhead crane company, CraneTech is focused on becoming the best crane service provider in the nation measured by customer and employee satisfaction. The company is well-established, well-funded, and well-positioned to support sustained expansion while continuously delivering exceptional products and service. We are industry leaders with a unique culture that differentiates us from our competitors and other field service businesses. A values-driven meritocracy, we provide our team members with opportunities for personal and professional growth.

Job Description Position Title: Return to Base Technician I (Tool Repair Technician) Responsible to: Tool Manager Scope: Performs tool repairs under the supervision of the department manager Basic Function: RTB supports the company through various duties, including, but not limited to making product inventory available, repairing, and making modifications to product. Primary Responsibilities: • Maintain a safe working environment., • Under the supervisor’s direction, disassemble, repair, reassemble, and test tools., • Prepare and complete source documents for labor and inventory transactions., • Follow step-by-step instructions to complete department tasks promptly., • Communicate trends or repeated quality issues., • Complete any other job responsibilities., • Able to effectively communicate with co-workers, industrial account managers, product managers, engineers, and quality technicians., • Use of lift and hand trucks; training provided if needed., • Must be able to work well in a team environment., • Must be able to read and write., • Basic computer knowledge is required- efficient in Microsoft Office., • Must be able to stand for 100%, lift, and bend for 40% of your entire shift., • Must be able to lift up to 70 lbs.; lift is provided., • Comfortable using hand tools, power tools, fixtures, and presses daily., • Must be able to use both hands to diagnose and repair products., • Must have 1-2 years of mechanical experience., • Must be able to use precision measuring instruments., • Must be able to meet the daily production quota., • Must be able to stay on task with minimum supervision., • Depending on company needs, you must be able to work overtime and weekends when asked., • Requires a high degree of mental concentration., • Requires a high level of attention to detail., • Must be able to work in a non-temperature-controlled environment.

Job Description S&K Building Services is expanding our team across the nation and looking for a Ground Level Window Cleaning Technician! As a Ground Level Technician, you’ll be an integral part of our team, supporting our client base from the ground level. Beyond that, if you’re looking for advancement opportunities, we love to train an This position will support Erlanger Window Cleaning, an S&K acquired company. Erlanger Window Cleaning | 3619 O Hara Rd, Erlanger, KY 41018 What You'll Do • Effectively cleanse windows and glass surfaces using non-abrasive cleaning tools., • Communicate with site contact before, during, and after completion of work, and retrieve customer endorsement on work order., • Transport and set-up water-fed poles to clean windows of multi-story buildings, and subsequent breakdown of equipment., • Effectively clean up after each job to ensure there is no residue or dirt left behind., • Ensure that the company vehicle is clean, maintained, and adequately stocked with window cleaning supplies at all times., • You have a valid driver’s license and clean driving record., • You have reliable transportation to/from work and job sites., • You have a clean-cut appearance and able to adhere to our dress code., • You are able to lift up to 60lbs., • You are able to scale and utilize ladders from 5ft to 40ft in height (safety training provided)., • You are able to work both indoors and outdoors during variable weather conditions., • You have excellent time-management skills., • You adhere to high ethical standard., • You work well in a team environment., • Competitive Hourly Base Pay of $17 to $20, • Weekly Pay, • Health Care Plan (Medical, Dental & Vision) - Benefits effective within 30-60 Days of Hire, • Retirement Plan (401k with a Company Match), • Paid Time Off (Vacation & Public Holidays), • Training & Development

Job Description Job Summary: We are seeking a skilled CNC Vertical Milling Machine Operator to join our small metal fabrication team. This position involves setting up and operating CNC vertical milling machines, cutting material to length using a saw when necessary, and performing per-part inspections to ensure quality standards are met. The ideal candidate will be detail-oriented, mechanically capable, and committed to maintaining production accuracy. Key Responsibilities: • Set up and operate CNC vertical milling machines according to technical drawings and job specifications., • Perform material preparation tasks, including using a saw to cut material to length as required., • Conduct per-part inspections using precision measuring tools to ensure accuracy and quality standards., • Maintain and perform routine maintenance on CNC machinery and equipment., • Follow safety protocols and ensure proper use of personal protective equipment (PPE)., • Previous experience operating CNC milling machines preferred., • Ability to read and interpret technical drawings and blueprints., • Familiarity with precision measuring tools such as calipers and micrometers., • Strong mechanical aptitude and attention to detail., • Basic computer skills for job tracking and data entry., • Physical stamina and ability to lift up to 50 pounds., • Competitive hourly wage based on experience., • Opportunities for skill development and advancement., • Paid time off and holidays. IjYUlZ83I9

Job Description About the Role We’re looking for a skilled and customer-focused Technical Support Specialist to provide remote assistance to customers and field service technicians. This role combines hands-on troubleshooting with exceptional communication skills to resolve issues involving electrical, electronic, and mechanical systems. This position is a desk position. What You’ll Do • Deliver prompt and effective support via phone, text, email, and video to diagnose and resolve product issues., • Guide customers through programming, setup, and troubleshooting in a patient, professional manner., • Assist field service technicians with real-time technical support during installations., • Use schematics, manuals, and CAD drawings to identify and correct electrical or mechanical problems., • Accurately document all support activities in the service database to track issues and recurring trends., • Investigate root causes, identify potential defects, and provide feedback to engineering and manufacturing teams., • Help develop technical bulletins, service updates, and training materials for internal and external use. What We’re Looking For • Proven experience providing technical support on electrical or mechanical equipment., • Strong communication and customer service skills — especially when guiding users through complex issues., • Proficiency in MS Office; experience with CRM, ERP, or service database systems a plus., • Ability to work independently and stay calm under pressure during high call volumes., • Background as a sound technician, electrician, or field service tech is a strong plus., • Self-starter who enjoys solving problems and improving customer experience.Company DescriptionWe are a firm focused in the STEM Talent Arena; Science, Technology, Engineering and Math. We build and have long term relationships with our clients and represent our clients transparently. We pride ourselves in understanding a candidate's skill set, and the culture and work environment that is a best fit for both the candidate and the client.We are a firm focused in the STEM Talent Arena; Science, Technology, Engineering and Math.\r\n\r\nWe build and have long term relationships with our clients and represent our clients transparently. We pride ourselves in understanding a candidate's skill set, and the culture and work environment that is a best fit for both the candidate and the client.

Job Description The Electrician III is responsible for all aspects of residential, commercial, and industrial wiring, troubleshooting, installing, and repairing of Rumpke owned equipment and buildings. Responsibilities of Position: • Schedule and complete repairs and installations according to company priorities., • Install new residential, commercial, and industrial service equipment., • Perform commercial & industrial troubleshooting, repairs, and installations., • Perform accurate daily time sheets., • Maintain and ensure the safe operating condition of assigned equipment and tools according to company policy and OSHA., • Perform skilled electrical maintenance and repair in a safe manner in compliance with all local, state, and federal regulations and company policies., • Supervise Electrical Contractors on large projects as assigned by Electrical Department Manager., • Professional interaction with internal and external customers., • Maintain open communication with the Electrical Department Manager., • Follow all company policies., • Other duties as assigned. Skills & Abilities Needed for Position: • Must obtain your Journeyman license within 6 months of employment., • Proficiency with National Electrical Codes and OSHA regulations., • Self-motivated and work efficiently with minimal supervision., • Capable of using all electrical testing equipment and electrical tools., • Proficient bending and installing Rigid and EMT conduit., • Must have the knowledge and experience to make code compliant and safe repairs and installations., • Ability to work at different heights with necessary safety equipment., • Must be available to be on-call., • May be assigned to work various hours and shifts based on business needs., • Requires out of town overnights stays. Additional Working Conditions/Aspects: • Exposure to residential and commercial waste., • Ability to travel between offices, as required., • Ability to work flexible hours; overtime, weekends, and/or holidays., • Ability to work overtime, weekends and/or holidays., • Must be available for 24-hour emergency calls., • Legally eligible to work in the United States., • Valid driver’s license (if applicable)., • Must successfully complete pre-employment testing., • Must be able to read and speak the English language. This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish a contract for employment and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke’s policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status or disability status.

Job Description Service Electrician Hourly Pay: $30 – $34/hour (based on experience) About Us: Bertke Electric Co. has proudly served the Greater Cincinnati area since 1928, providing high-quality electrical services for commercial and industrial clients. Our legacy includes work on iconic buildings such as the Hyatt Regency, Riverbend Music Center, and Kroger Headquarters. We specialize in electrical service work—maintaining and repairing systems, conducting infrared/thermal imaging, arc flash studies, and training. Safety and continuous training are central to everything we do. Position Overview: We're looking for a skilled Service Electrician to join our growing team. This role focuses on diagnosing, maintaining, and repairing electrical systems at commercial and industrial client sites. If you enjoy troubleshooting, solving problems on the go, and delivering excellent service, we'd love to hear from you. Key Responsibilities: • Troubleshoot, repair, and maintain electrical systems and equipment at customer sites, • Perform preventive maintenance and inspections to identify potential issues, • Read and interpret blueprints, schematics, and diagrams, • Ensure all work is performed in compliance with local and national electrical codes, • Provide excellent customer service and explain repair or maintenance work clearly, • Maintain accurate records of service calls, repairs, and materials used, • Safely operate a service vehicle and manage job site tasks independently or with a small team, • Mentor apprentices when needed and uphold job site safety standards Qualifications: • Completion of an electrical apprenticeship program or equivalent experience, • Valid Journeyman license or equivalent field experience, • Strong knowledge of NEC codes and electrical systems, • Ability to diagnose and repair electrical issues efficiently, • Excellent communication and customer service skills, • Valid driver's license and clean driving record Perks & Benefits: • $30 – $34/hour (commensurate with experience), • Company-provided uniforms, service van, and cell phone, • Up to 6 weeks paid time off (PTO), • 6 paid holidays, • 401(k) with company match, • Medical, dental, and vision insurance, • Long- and short-term disability coverage, • Life insurance Equal Opportunity Employer: Bertke Electric Co. is an equal opportunity employer. We value diversity and do not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status.

Job DescriptionCome make a difference with a growing Integrated Facilities Management Company. At tdgFacilities (TDG), we are committed to providing our team members with growth opportunities to achieve their career goals and aspirations. As a Full-Time Mobile Commercial Electrician in the Greater Cincinnati area, you will work across a variety of mechanical and building related electrical systems. This role offers the opportunity to work in a highly collaborative environment across multiple functional teams and will support both on-demand break/fix and special project-based work. This role requires excellent problem-solving skills, as well as a broad range of skills in corrective, preventative, and routine repair/maintenance procedures. The successful candidate will also possess experience with commercial equipment installation, which may include HVAC and plumbing tasks as well. We’re looking for motivated professionals who take pride in solving problems, keeping facilities running smoothly, and delivering top-notch service with a positive attitude. If you're ready to grow your career with a company that values your expertise, supports your development, and celebrates your success - then apply now! Our team is looking forward to learning more about you. Schedule: The typical schedule for this full-time role is 7:30am to 4:30pm Monday - Friday, with occasional on-call requests (scheduled within a team rotation) ESSENTIAL DUTIES AND RESPONSIBILITIES: • Perform intermediate-level installation, maintenance, and repair of electrical systems, equipment, and fixtures up to 480 volts., • Troubleshoot issues in circuits, wiring, motor controls, lighting, and receptacles with minimal guidance., • Conduct preventive maintenance and inspections per IFM standards and computerized maintenance management systems (e.g., Dynamics 365 Field Service, CMMS)., • Maintain and repair lighting systems, including LED retrofits, ballasts, drivers, and occupancy sensors., • Support testing and maintenance of emergency lighting, generators, and UPS systems., • Assist in the installation of conduit, raceways, panels, and distribution components for tenant improvements or small projects., • Apply proper lockout/tagout (LOTO) and electrical safety procedures in accordance with NFPA 70E and OSHA standards., • Collaborate with other trades and vendors on coordinated maintenance tasks or cross-discipline troubleshooting., • Maintain accurate documentation of work performed, materials used, and inspection findings., • Respond to service calls, participate in on-call rotation, and provide support during power outages or facility emergencies., • High school diploma or GED required; completion of an electrical trade school or apprenticeship program (Journeyman preferred)., • 3–5 years of commercial or industrial electrical experience., • Working knowledge of NEC, OSHA, and NFPA 70E standards., • Experience with low voltage applications such as Security, Access Controls, BAS systems, including but not limited to pulling cat 5/6 wire, installing security cameras, and installing door access devices., • Ability to read and interpret wiring diagrams, blueprints, and equipment schematics., • Basic proficiency with work order and asset management software (Dynamics 365, ServiceChannel, or similar)., • Skilled in the safe use of hand and power tools, test equipment, and PPE., • Physical ability to lift up to 50 lbs., climb ladders, and work in elevated or confined spaces., • Strong teamwork, problem-solving, and communication skills., • Valid Driver's license, • Health/dental/vision insurance, • Short/long term disability, • 401K with company matching, • Paid Time Off & Holidays, • Phone Stipend We are an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Job Description Well maintained plant making food product, so mixing, filling equipment, case packing, conveyors, proximity switches, etc… Electro-Mechanical skills helpful, but not required. Must have: • 2+ years’ experience in high speed manufacturing environment., • HS graduate minimum, • Experience with motors, plc’s, inspection systems, conveyors,Prefer:, • Food experience, • Certification or journeyman electrician, • Electromechanical skills

Job Description Overview Tradesmen International is immediately hiring experienced Electricians Of All Skill Levels for projects located in the Wyoming, OH area. This is a first shift opportunity, and the pay rate is up to $34/hour based on experience and skill level. If you are a Journeyman or Apprentice eager to master your skills while working alongside our accomplished Craft Professionals, this is your chance to advance your career! Job Scope: • Read blueprints, • Bend pipe, • Conduit installation, • Conduit bending, • Circuit testing, • Install outlets, fixtures, panels and terminations, • Running wire; EMT conduit, • Light installation work, • Wiring of new checkout machines, • Offsets, • Other tasks as assigned Responsibilities • Standard PPE, • Experience In Commercial Construction, • Experience Of Using Hand And Power Tools Such As Benders Drills Multimeter And Voltage Tester, • Must Have Own Reliable Transportation, • Must Have All Electrical Tools Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job DescriptionLocation: Cincinnati, OH Employment Type: 1st Shift, Full-time, direct hireJob Brief Kable Workforce Solutions is hiring a Custom Assembler for our client. This job involves support production of control panels, assemblies, and related equipment. This role involves hands-on electrical and mechanical assembly, interpreting technical instructions, and ensuring products meet quality and delivery standards.What’s a Typical Day Like? • Perform electrical / mechanical assembly on a variety of components, sub-assemblies, and top-level assemblies by following specified procedures and instructions to produce electrical / mechanical components., • Review and interpret general instructions on routine work and detailed instructions on new assignments; ask clarifying questions when in doubt., • Layout and wiring of industrial control panels (back panels and doors)., • Interconnecting industrial control panels with skid mounted equipment., • Testing control systems., • Over-the-phone trouble shooting and customer service., • Meet project completion timelines and shipping schedules., • Maintain a clean and efficient shop & production area., • Has a full understanding of standard products and is able work with and assist assembly aspects of products., • Other duties as assignedWhat Are the Requirements of the Job?, • Possession of High School Diploma or GED, • 1-5 years’ experience, • Able to read advanced standard blueprints, schematics and have consistently proven high efficiencies on assignments with outstanding quality. Capable of doing welding required for the position., • Can perform functions of refrigeration including leak testing and repairs., • Have displayed the ability to be a good communicator and the ability to work in a team environment with success., • Preferred: previous experience working in a manufacturing environment, • Preferred: experience and education in refrigeration, including wrapping, piping, soldering, brazing, and mounting of refrigeration components, • Demonstrated ability to follow procedures, • Familiarity with tools.

Job Description Join a team where your skills make a real difference every day! We’re looking for motivated cleaning service professionals who take pride in solving problems, keeping facilities running smoothly, and delivering top-notch service with a positive attitude. If you're ready to grow your career with a company that values your expertise, supports your development, and celebrates your success - then apply now! Our team is looking forward to learning more about you. TDG Facilities, LLC is seeking COMMERCIAL CLEANING TECHNICIANS in the Greater Cincinnati area. Ideal candidates will be highly dependable, committed to being on site daily to support general facility operations, able to provide cleaning services to the highest standard with a qualified and skilled team. Qualified candidates will have commercial cleaning experience and will have reliable transportation to work. If you enjoy supporting a dedicated customer facing team, this role could be a perfect fit for you. Come join a fast-growing company with a commitment to growing talent and providing exceptional service. Schedule: Full Time - 2nd Shift ($16/$18 per hour). Come join an amazing team in a growing company! ESSENTIAL DUTIES AND RESPONSIBILITIES: • Work with site-based personnel to ensure daily cleaning tasks are performed, • Maintain and use janitorial equipment safely and properly, • Clean and sanitize restrooms, • Dust and clean hard surfaces, • Vacuum, sweep, mop floors – including stairs, hallways, and commons areas, • Clean and vacuum carpets, • Empty all trash receptacles, replace liners, and place in dumpster, • Wipe down doors and clean glass if applicable, • Support laundry facility function, • Periodic special facility team projects, • Restock supplies, • Commercial janitorial experience a plus!, • Keen eye for detail, • Ability to self-manage and perform essential duties daily, • Excellent time management and communication skills, • Commitment to completing work daily to support customer operations, • Health, Dental, Vision, STD/LTD, • Paid Time Off, • Paid Holidays We are an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Job DescriptionSalary: Advanced Mechanical Plus is (AMP) seeking Field Service Technicians responsible for troubleshooting, diagnosing, and repairing commercial Hot side, refrigeration and HVAC equipment at our customer locations. An effective Service Technician has the ability to: • Properly troubleshoot, diagnose, and repair Commercial Refrigeration Equipment, Ice Machines and HVAC systems to include installation and repairing systems by mounting, installing, fabricating, or connecting compressors, condensers, evaporators, motors, expansion and discharge values, motors and fans, control panels, switches, fuses, filters, gauges, ducts, piping, tubing, and related components., • Work on commercial kitchen and cooking equipment such as: mixers, grilles/griddles, char-grills, ovens (deck and pizza), warming cabinets, holding cabinets, food wells, fryers, steamers, and pasta cookers, • Maintain a neat and orderly truck, appearance, and customer first mentality., • Communicate effectively with customers and managers, • Holds an EPA Certificate, • Brings 1-2 years of Field experience or current/graduate of technical program, • Ability to be on an on-call rotation schedule Benefits of Employment: • Top of the line training both internal and external classes, • Ability to earn your Master CFESA technician certification, • Opportunity to make a leader, be a leader., • Competitive Pay, top of the line benefit package to include subsidized medical insurance plan, 401K with company match., • Company paid life insurance, as well as Short/Long term disability programs should needs ever arise., • Stocked and parts-maintained company vehicle, gas card and spending card., • Vacation and holiday pay, • On call Bonus even when you do not get called out! Are you getting the training you deserve? If you can deliver customer service in the field along with defining service problems, collecting data, establishing facts, and drawing valid conclusions - this is the perfect environment for you!!

Job Description All shift available! Highly automated food processing plant with processes that include mixing, cooking, and packaging food products. Maintain HVAC systems in production plant to include Boilers, and Ammonia Based HVAC systems Ability to Troubleshoot, Replace, and do Preventative maintenance on equiptment is essentially the Job. Must have: Covid shot! 2 or more years experience in HVAC Ability to work long work weeks (but you are paid well). Paid lunches For those who want to make big bucks! 8 hours shifts available (1st,2nd, or 3rd shift!). 13 days on 1off, Or 10 Hour day, 4 days per week. You earn a 3K bonus after 90 Days.

Job Description Resumen de la empresa los servicios Necesario para instalar molduras de corona y zócalos en la Universidad de Miami. Innovadores de mano de obra y limpieza es una empresa de rápido crecimiento que ha estado en el negocio por más de 50 años. Resumen del trabajo actualmente buscamos carpinteros y obreros capacitados y sanos para ayudar con la construcción de vallas y cubiertas. Gran parte del trabajo será una simple limpieza de los sitios de trabajo. Responsabilidades y deberes capacidad de seguir instrucciones. Hábil en el uso de todas las herramientas necesarias para cortar, moldear y suavizar la madera y otros materiales de acuerdo con las mediciones. Exactitud tomando mediciones y calculando el tamaño y la cantidad de material necesario para un proyecto.. Las calificaciones y habilidades deben ser capaces de aprobar un examen de drogas pre-empleo (en algunos casos) debe ser capaz de levantar y transportar al menos 50Ibs. Transporte confiable y un Plus. Debe ser capaz de trabajar en OH y KY. Beneficios y ventajas compensación basada en la experiencia y nivel de habilidad hasta $24/hora todas las posiciones disponibles requerirán que las personas tengan una buena asistencia y una excelente ética de trabajo. Los deberes de trabajo variarán dependiendo de la experiencia y el conjunto de habilidades de los empleados individuales. Compensation: $30 an hour Felons are encouraged to apply! Powered by JazzHR hizS7cHflX

Job DescriptionDescription: Cincinnati, Ohio, 45227 Full-time, First Shift Pay: $30.00 - $32.00/hour Omnia360 Facility Solutions is a full-service provider of customized and cost-efficient integrated facility solutions for corporate offices, multisite dispersed portfolios, education, and industrial-focused organizations. We are currently seeking a site-based HVAC/R Technician for the first shift, specifically for a commercial location. This position is to join our growing team of exceptional individuals. This is a great opportunity for someone who wants to work at the same location daily! Join Us! Great people make great teams. We have a great team here, and the results speak for themselves! We are always looking to supplement our outstanding workforce. We encourage you to discover, develop, and apply your talents, enabling you to reach your full potential with us. In return, we provide you with everything you need to succeed, including a comprehensive benefits program to take care of you and your family. Benefits for the HVAC/R Technician-Commercial Site-Based position include: • Weekly pay! - $30.00 - $32.00/hour, dependent on your experience and skills., • Full benefits package including health, dental, vision, disability, and life insurance., • 401(k) retirement plan, including company match of up to 4%., • Health Savings Account, including company match., • Paid time off that begins to accrue on your first day., • Nine paid holidays., • Perform Preventive Maintenance on controls, pumps, heating, ventilation, and related equipment., • Ability to diagnose causes of problems and/or failures in the commercial heating/air conditioning system for system repair and/or replacement needs., • Tests and calibrates electronic HVAC and building environmental controls, ensuring equipment is functioning properly., • Respond to emergency maintenance requests, including those outside regular business hours., • Inspect, troubleshoot, and perform repairs and replacements on equipment., • Utilize the CMMS work order system., • Possess outstanding customer service skills and a can-do attitude., • A high school diploma or GED is required, along with at least 5 years of experience in commercial HVAC/R., • Basic computer knowledge., • Must have the ability to complete required safety classes., • Personal hand tools., • Must have current HVAC and EPA License. A Family Tradition that you can Trust At Omnia360, we are a family-owned business that strives to lead, treat, develop, and take care of our team as the family they are to us. Our leadership team has spent their combined 100-year career working in every facet of construction and facilities maintenance. As a full-service provider of customized and integrated solutions, we work closely with our clients, carefully managing their facilities so they do not have to. Note: The above statements are intended to describe the general nature and level of work being performed and are not intended to be an exhaustive list of responsibilities, duties, and skills required for this position. Omnia360 is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Requirements:

Job DescriptionKable is in urgent need of an Electrical/Mechanical Assembler in Cincinnati, OH. This position is a full-time, temp to hire opportunity. FULL JOB DESCRIPTIONPRINCIPAL DUTIES & RESPONSIBILITIES • Reads and interprets the job assignment’s schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions., • Assembles, positions, aligns, and fastens components to back planes or units by using a variety of hand tools and equipment., • Assembles electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment., • Adjusts, repairs, or replaces electrical or electronic components to correct defects and to ensure conformance to specifications., • Positions, aligns, or adjusts workpieces or electrical parts to facilitate wiring or assembly., • Tests assembled parts to ensure correct functionality when required., • Identifies and reports faulty or unsafe components and conditions to management during the assembly process., • Prepares all surfaces and components to ensure no damage occurs during assembly and testing., • Reports all accidents, injuries, unsafe activities, maintenance requirements, or mechanical faults., • Complies with all safety policies, practices, and procedures per the Company’s protocols., • Follows the Five S methodology manual at all times. Sort, Set, Shine, Standardize, and Sustain.REQUIREMENTS, • High School Diploma or GED., • Ability to read and interpret schematic drawings, blueprints, and specifications., • Strong communication skills., • Consistent attendance and a safety-conscious attitude., • Ability to work with minimal errors and take initiative., • Must be able to remain stationary for 60% of the time; ability to lift up to 60lbs or 600lbs with assistance., • Exposure to fumes, airborne particles, and chemicals; noise level typically moderate., • Required to wear personal protective equipment., • Ability to work in fast-paced environment., • Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel., • Ability to utilize hand/eye coordination., • Capability to stand for prolonged periods of timeWHY KABLE STAFFING?, • Weekly Pay, • Exclusive Access Opportunities to V.I.P. Vault, • Day 1 Benefits, • Various Bonus Opportunities, • Eligibility for Employee of the Month RewardsABOUT THE KABLE GROUPFor over 50 years, The Kable Group has been committed to connecting candidates looking for reliable work opportunities with companies in need of workforce solutions. We leverage our expertise in core industries to ensure that the needs of our clients and our candidates alike are satisfied. Whether it’s a professional position, skilled labor need, or an education opportunity, The Kable Group’s suite of solutions caters to finding the right fit, every time.At the Kable Group, we do not just accept diversity — we celebrate it, we support it, and we thrive on it. Read our full diversity statement here.This job description is not intended to be all-inclusive and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required. #KS11534

Job Description Maintenance Technician • Cincinnati, OH, • $33 p/h - $35 p/h, • Availability on 1st and 3rd shift (2-2-3) Duties as an Maintenance Technician: • Maintaining mechanical, electrical, hydraulic and pneumatics, • Single and three phase motor wiring, replacement and repair, • Electrical troubleshooting and diagnostics, • Interpreting blueprints and electrical schematics, • Minimum 5 years of industrial maintenance experience (covering both electrical and mechanical)., • Background in manufacturing, ideally plastics, extrusion, or similar industry., • Electrical troubleshooting and repair skills, with the ability to also work confidently on mechanical systems., • must have ability to read and interpret electrical and mechanical schematics., • Strong problem-solving skills and the ability to work independently on the night shift. This position is commutable from Hamilton, Fairfield, Middletown, Oxford, Monroe, Trenton, West Chester, Cincinnati Relevant Job Title: "Maintenance Technician" "Maintenance Mechanic" "Multi-craft Maintenance" "maintenance electrician" All applicants must live in the USA and be eligible to work and live in the USA. Please note, our client is unable to offer Sponsorship or Visa support for this role. Due to the sheer volume of applications, we will only contact successful applications. Therefore, if you have not heard from us within 10 working days, please deem your application as unsuccessful. You should be proficient in: • Electrical Schematics, • Plastic Extrusion Experience

Job Description Residential Service Electrician – Tom Drexler Plumbing, Air & Electric Must have valid Journeyman or Master Electrician License Location: Cincinnati, OH (West Chester, OH) Work Type: Full-Time Schedule: Monday–Friday with rotating Saturdays Compensation: $70,000 – $120,000+ annually (Base Hourly Pay + Performance and Efficiency Incentives) Sign On Bonus of up to $10,000 for TOP PERFORMERS!!! Reports To: Electrical Service Manager About Tom Drexler Plumbing, Air & Electric Tom Drexler Plumbing, Air & Electric has proudly served the Louisville area for more than 30 years, earning a reputation built on quality workmanship, integrity, and customer care. Our team-first culture and focus on professional development make us one of the region’s most trusted home service providers. Why Join Our Team? • Competitive base pay with performance-based incentives, • Health, Dental, Vision, and Life Insurance, • 401(k) with company match, • Paid Time Off (PTO) and Paid Holidays, • Employee discounts and referral programs, • Take-home vehicle stocked with tools and parts, • Paid uniforms, cell phone, and tablet, • Lead and complete residential electrical service projects, • Troubleshoot, diagnose, and repair electrical systems, • Provide exceptional customer service in homes and on job sites, • Maintain accurate job records and communicate updates with customers and team members, • Represent Tom Drexler professionally while operating company-provided vehicle Required: • Minimum 2 years of residential electrical service experience, • Clean driving record and valid driver’s license, • Ability to pass a background check and drug screening, • Strong troubleshooting and problem-solving skills, • Excellent communication and customer service abilities, • Valid Journeyman or Master Electrician License, • Experience leading or mentoring other electricians All employment offers are contingent on successful completion of a criminal background check, MVR review, and drug screening. These are conducted in compliance with applicable laws and regulations. Disclaimer The above job description is not intended as, nor should it be construed as, exhaustive of all responsibilities, skills, efforts, or working conditions associated with this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of this job. EOE