Trabajos data engineer en Rochester, New YorkCrear alertas

Overview: The Sr. Project Engineer role will oversee and execute the project controls and management of a multiple discipline, EPC project. Your main functions will include (but not limited to) responsibility for the full scope of the project such as direct support to a Sr. Project Engineer II installed quantity monitoring, contract administration, project planning and scheduling, procurement, and project reporting. The Sr. Project Engineer I role requires interfacing with all areas affected by the project including the client(s), engineering/design, subcontractors, distributors, equipment vendors, and the ongoing strategic communication with project management regarding the status of the project. Location & Travel Details: You can be based in any city or state in the U.S.. This is a traveling, project based position, up to 90% of the time. You have the potential to be placed on a project site located in any state throughout the US. You’ll spend 8-18 months on average per project. We offer designated per diem in addition to an excellent base salary to support and help you cover living expenses. This position is eligible for mobilization support (may include mileage reimbursement), and includes one longer weekend every four weeks for additional time at home. A company vehicle and fuel card OR vehicle allowance will be provided. COMPANY OVERVIEW: MasTec Industrial, alongside its sister companies Casey Industrial and Phoenix Industrial, has been in operation since 1947. We serve a diverse clientele, including utilities, independent power producers, developers, and municipal utilities. Specializing in projects using natural gas, oil, biomass, and other combustible fuels, our team boasts over 30 years of expertise in the power industry. We provide EPC (Engineering, Procurement, and Construction) services and assist in project development. Our experience spans various systems for utility and industrial facilities, including simple and combined cycle plants, reciprocating engines, and waste-to-energy projects. MasTec Industrial delivers value throughout all project phases, from conceptual design to operations and maintenance. At MasTec Industrial, we are dedicated to delivering the highest quality, safety, and value in every project. We focus on attracting, developing, and retaining top talent within our organization. Our goal is to foster a respectful work environment where all employees feel valued, included, and empowered to become innovative leaders in the industry. The MasTec Industrial market sector is part of the MasTec Clean Energy & Infrastructure business segment. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. In addition to our industrial market sector; In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Our renewables sector focuses on solar, wind and battery storage. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Responsibilities: ESSENTIAL JOB FUNCTIONS: • Represent in a professional manner in all client interaction activities., • Provide the client with contract required reports (weekly, monthly, schedule.), • Champion Corporate Safety Plan and help develop the site-specific safety plan., • Create quantity calculation formulas to accurately determine percentage of completed/installed materials., • Develop a process for the creation and review of work plans and work packages., • Provide support to ensure the site quality plan is communicated and all inspections and quality documentation is being completed on time and assembled for final turn over., • Manage the compilation, processing, and customer approval of daily labor timesheets., • Review and train people the correct usage of Job Safety Analysis (JSA’s), • Lead jobsite safety reviews, toolbox meetings, mass safety meetings, and safety training., • Track material deliveries and develop procurement status report., • Plan, schedule, and coordinate work groups on the jobsite., • Direct other to perform material takeoffs from drawings, specifications, and other contract documents., • Perform complex engineering calculations and technical drafting to support field operations., • Direct Field Engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use., • Review field issued purchase orders and subcontracts, prepare material buyout take offs from issued for construction drawings., • Direct home office performed procurement and subcontract administration functions., • Provide field support and supervise subcontractor operations., • Manage all project recordkeeping and correspondence functions including daily reports, photographs, requests for information (RFIs), submittal, transmittal, memorandums, and other contract required correspondence., • Create and closely monitor project controls such as productivity tracking including Average labor rate, indirect scheduling, equipment schedule and log, risk, and opportunity log, etc., • Create and maintain master project schedule., • Generate change orders and as-built data to be reviewed by the Project Manager., • Drive the planning process through the master schedule, 6-week, 3-week, 1-week, and manpower curves., • Administering Accounting/Job Costs/Work in Progress (WIP) Updates: Learn and Assist the Project Manager with these activities., • Lead the budgeting process of taking the Estimate and converting it to the Standard Phase codes., • Alert Project Manager and Home Office of trends regarding labor, material, subcontractor and equipment costs., • Accurately manage the cost forecasting process for entire project (labor, materials, subcontractors, equipment.), • Identify trends and suggest corrective actions when needed., • Establish the cashflow forecast and curve to ensure positive cashflow for the project., • Act as primary company representative in the absence of or as directed by Project Manager., • Know all of the provisions, terms and scope of the Prime contract., • Develop and prepare Schedule of Values and all Invoices to customer., • Manage, lead direct reports, and mentor. SUPERVISORY: • Support a crew of 100 people for short periods if needed., • Lead/Direct a team of 1 or more Field Engineers., • Bachelor’s degree in engineering, construction management, or related., • 7 plus years’ experience as a Field Engineer or similar role. KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: • Be knowledgeable of MIC Health and Safety programs and project specific regulations., • When on-site, actively participate in daily toolbox meetings with crews and subcontractors., • Set a personal example of safe behavior., • Ability to read, analyze and identify discrepancies on engineering plans, specifications, and contract documents., • Provide constructability and cost saving alternatives at design phase of project., • Ability to freely access all points of a construction site in wide-ranging climates and environment., • Highly motivated, with a demonstrated passion for excellence and taking initiative., • Strong work ethic, willing to do what it takes to get the job done right the first time., • Demonstrated commitment to ethics and integrity., • Passion for safety, with the ability to help us ensure that nobody gets hurt., • Leader with the ability to delegate work and provide support as needed to meet deadlines, goals, and objectives., • Willing to travel extensively and relocate to the next project location for an extended period (typically 6-12 months.), • Other may duties may be assigned, • Maintain in-depth relations with all members of their team and your supervisor. PHYSICAL DEMANDS: • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions., • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks., • Stamina to perform this task repetitively and continuously for several hour intervals., • Uncontrolled environmental conditions: Constant change in weather and site conditions., • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises., • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)., • Move in and around confined, cluttered, and uneven areas., • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights., • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings., • Visualize objects in three dimensions from drawings., • Keep good balance and work at heights., • See well (either naturally or with correction)., • Hear well (either naturally or with correction.) Financial Wellbeing • Compensation $130,000 - $180,000 per year, commensurate with experience., • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ___. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-MH1 #LI-Onsite Appcast (For Export): #appred

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Eastman Kodak Company is looking for a Control System Engineer to join our team in Rochester, NY. We are seeking an individual with the background to be successful supporting our batch Emulsion and Film Sensitizing Machine Manufacturing Operations located within Eastman Business Park in Rochester, NY. Primary Responsibilities • Provide technical support for the operation, maintenance and continuous improvement of manufacturing instrumentation and process control systems., • Work closely with operations, process engineers, and maintenance to understand the business and user needs and priorities., • Provide full life cycle support of control systems in our film sensitizing area, including developing requirements, programming support, commissioning, and ongoing hardware and software maintenance, from the control room to the field instrumentation., • Support upgrade projects for existing Rockwell Automation PLC based control systems, Emerson Ovation DCS and Reliance Automax Machine Coordinated Drive Control Systems including identifying system hardware and software architecture improvement opportunities., • Provide hardware and integration support for Ethernet based control systems in the plant IT environment., • Work with maintenance to develop data driven reliability improvement opportunities, as well as troubleshoot system hardware, resolve software malfunctions and assist in system improvements and software upgrades., • Implement improvements in systems capabilities that will increase the ability to meet customer requirements, including safe and reliable operations, and improve business competitiveness, using Six Sigma methodology as applicable. Qualifications • Bachelor’s degree in electrical engineering or Electro-Mechanical Technology (Mechatronics), • Knowledge and understanding of Rockwell Automation PLC's and Process Control DCS, • Communication skills: ability to interact with operator/mechanics/process engineers/staff/management, • Knowledge of Rockwell VFD’s, their application and configuration, • Ability to complete work independently and through influence, • Ability to lead and participate on teams, including outside contractors, • Ability to configuring, documenting and troubleshooting control systems

The Sr. IT Solutions Engineer helps design innovative solutions to support business and IT process improvements. This position requires at least one functional ERP and technology competency with the ability to support solution definition and design. The ability to design solutions at a technical configuration level and document functional specifications is essential. This is primarily a delivery position for a specific functional area. Stabilization support is expected with the ability to document and transfer knowledge as required. This is position which requires a high degree of technical knowledge. Effective communication and prioritization skills are required. This is an onsite role in Rochester, New York. Responsibilities: • Participate in high performance teams which deliver (design, configure, develop, test, train,, • document, implement and stabilize) technical and business process solutions, • Work directly with stakeholders to analyze current business process requirements,, • understand gaps, and create functional specifications for improvements, • Provide stabilization and escalation support, performing knowledge transfer as required, • Mentor, manage and coach IT professionals to create productive, high-performance teams, • Ensure ongoing, auditable compliance with legal and regulatory requirements Preferred Knowledge: • Application and business process design, • Third-party API integration, • SAP ERP experience: SAP PP/MM/QM, • Ability to lead the design, configuration and optimization of technical solutions including SAP PP/QM modules to support manufacturing solutions, • ABAP debugging and technical troubleshooting, • IT technology and data management, • Application development Required Education: • Bachelor's degree required

We are looking for a Manufacturing Process Engineer to join our Advanced Materials & Chemicals division onsite in Rochester, NY. You will support Film Finishing organization within the Industrial Films and Chemicals division at Eastman Business Park. In this role, you’ll provide mechanical and process engineering support for day-to-day operations and lead projects that enhance manufacturing efficiency, quality, and safety. Key Responsibilities: • Troubleshoot manufacturing issues and drive root cause analysis., • Lead capital projects from concept through implementation., • Design mechanical components and systems using SolidWorks and GD&T principles., • Own the process flow for assigned product lines, ensuring efficiency, quality, and continuous improvement., • Collaborate with operations, maintenance, and quality teams on process improvements., • Support documentation and quality systems to ensure compliance., • Apply Lean Six Sigma methodologies to optimize processes. Minimum Qualifications: • BS in Mechanical Engineering, Manufacturing or equivalent and 5–10 years of relevant experience OR Associate's degree and 5-10 years relevant experience., • Strong mechanical design skills and proficiency in SolidWorks., • Demonstrated ability to lead, plan, organize, and execute projects., • Excellent troubleshooting and problem-solving skills., • Proficiency in Microsoft Office (Excel, Word, Project)., • A strong work ethic, high motivation, and Self- Starter. . Preferred Qualifications: • Experience with Lean Manufacturing practices., • Knowledge of SPC, DOE, or Six Sigma process improvement methods., • Ability to use statistical methods for data analysis., • Strong communication skills and ability to thrive in a fast-paced environment. Learn more about Film Finishing:

What you will do The Energy Solutions Development Engineer Leader operates as a subject matter expert in a fast-paced, growth-oriented, national support team in Johnson Controls Building Solutions North America. The Solution Development Engineer role requires a self-directed, internally motivated and operates with personal integrity with a strong foundation for utility, state and federal program development, project design, estimating, and scope development for within Living Spaces that include: Public Housing, Affordable/Multifamily Housing, Privatized Military Housing, County Facilities, Jails, Nursing Homes, Courthouses, Juvenile Detention Centers, Correctional Facilities, State VA Hospital with Retirement Homes, Assisted Living or Long-Term Care, Homeless Shelters, Senior Housing, and Higher Ed Dormitories RESPONSIBILITY LEVEL: Responsible within the Living Space Vertical Market related to developing and/or oversight for all program development, program incentives and applications, energy savings, project estimating, and project scope development, overall buildability, and customer expectations. Strategizes and collaborates with the Sales and Engineering, within the area, to secure energy performance contracts are executed as presented to client, state and federal agencies. Develops and maintains Customer and Subcontractor relationships. External Relationship: The Living Spaces Energy Solutions Development Engineer II Leader is actively involved in the local contracting community, industry organizations, and networks with local subcontractors. Responsible for maintaining high customer satisfaction for projects during the execution phase. Internal Relationships: * Works collaboratively with the area team to establish and maintain national market dominance. * Assists as required to effectively plan for future resource needs and assists in allocating resource needs to meet near term commitments. * Assesses development needs and works with the Area Engineering and Installation Managers to assign Construction Managers, as needed, to provide sales support activities early in the audit process to provide input on vendor/partners selection, scope enhancements, value engineering, risk assessment etc. * Assesses Project execution needs and works with the Area engineering and Installation Manager to assist in assignment of Construction Managers, as needed, to area projects. * Assists in ensuring Fiscal Year plans are met. * Assists the Vertical Market Director in the monthly financial reporting of the Living Spaces market. How you will do it PRIMARY DUTIES: Self-performs sales support activities early in the audit process to provide input on vendor/partners selection, scope enhancements, value engineering, risk assessment etc. Understand residential multifamily market and support design related to energy efficiency and GHG reduction goals. Understands federal and state programs, project scope and customer expectations. Utilizes resource planning techniques to gain high proactivity from team members. Plans, schedules, and controls project development activities. Broad knowledge of commercial/contractual complexity/deal structure/financial acumen/disciplines of supply chain…negotiation skills…communication skills…c-level relationships Established long term customer and contractor relationships. Influences customer. Ensures that Region develops and adhere to a Project Execution Plan for each assigned project. Determines when resources will be needed from the Area Engineering and Operational Team. Determines the duration Area Construction resources will be assigned to the area. Establishes customer touch points throughout the life cycle of projects to gain feedback on customer satisfaction. Coaches’ teams on proactively addressing customer feedback. Provides leadership by demonstrating focus on exceeding customers’ expectations. Effectively communicates the status of projects to Vertical Market Director as required execution. Fosters and maintains good working relationships with subcontractors. Fosters and maintains good working relationships with JCI internal Systems, Service and Lighting partners. Ensures compliance with state, local and federal legal requirements and ensures that Energy Solutions business is conducted with the highest ethical standards. Champions and drives the BSNA Safety Program for employees and subcontractors at all levels within the area Installation organization and subcontractors. PRODUCTIVITY MEASURMENTS: The Energy Solutions Development Engineer II Leader is responsible to program funding, state and federal approvals, constructability, customer satisfaction and project execution for the Living Spaces portfolio. The following metrics define this responsibility: * Project Overall Buildability * Successful Delivery of Funding Programs * Mentoring of Regional Engineers * Maintain working relationship with State and Federal Offices What we look for Bachelor’s degree in engineering or business or equivalent work experience. Six or more years of progressively more responsible Multifamily energy engineering experience in the Engineering Industry including four or more years of direct program management experience. General understanding of HVAC, and other mechanical systems and engineering. Detailed knowledge and experience in project scope development, project risk assessment and overall project costing. High-level competence in written and verbal communication. Strong presentation skills and proficiency in speaking to large audiences. Ability to lead, manage, mentor, and inspire others. Knowledge of multiple levels with the supply chain org. Polished presentation skills, multi-faceted thinker, innovator. Strong ability to negotiate, persuade and influence. Proficient in software scheduling tools, modeling software, and applications. High level project management process competencies. Strong proficiency in MS Office (excel, word, power point), Adobe Writer, Visio, MS Project, basic windows environment, and internet business application usage. Required to have direct working knowledge of one or more of the following markets: Affordable/Multifamily Housing and Public Housing, Privatized Military Housing, County Facilities, Jails, Nursing Homes, Courthouses, Juvenile Detention Centers, Correctional Facilities, State VA Hospital with Retirement Homes, Assisted Living or Long-Term Care, Homeless Shelters, Senior Housing Higher Ed Dormitories or similar markets. Who we are Johnson Controls is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view ___. If you are an individual with a disability and you require an accommodation during the application process, please visit ___. HIRING SALARY RANGE: $85,200 - $117,200 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at

Job DescriptionElectrical/Controls Engineer Job Title: Electrical/Controls Engineer Date: 2/29/2026 Location: Rochester, NY Job Description: We are part of the world wide GH Group in Rochester, New York that supplies integrated induction heating systems worldwide. We are looking for an Electrical/Controls Engineer with controls systems design experience to join our team. Responsibilities include electrical schematics, electrical hardware specification, controls/interface programming, and communicating with both customers and vendors. Individual needs to be a motivated team player with excellent problem solving, communication, and interpersonal skills. Paying 65K-100K per year depending on experience. Responsibilities: Prepare electrical schematics, including panel layouts and bill of materials. Size equipment such as drives, relays, power supplies and contactors. Prepare data sheets, Order of Operation and other documentation on equipment. Obtain technical information from equipment suppliers. Recommend creative, technically feasible solutions that satisfy customer needs, while adhering to engineering standards and strategic direction. Evaluate state-of-the-art technological developments in various controls systems, and apply the latest advances. Apply engineering techniques in designing a control system that is reliable, serviceable, energy efficient and competitive. Interface with Sales, Mechanical, Machine Shop, Build, Service, personnel as well as a multi-tier supplier base. Work with in worldwide product regulation and compliance to design systems that meet both customer and government regulations, restrictions and codes. Strive for continuous improvement in both processes and products. Requirements: Minimum Education Associates Electrical Engineering/Technology Strong troubleshooting and analytical problem solving skills Proficient in Microsoft suite of products Willing to travel when/where required. Desired Knowledge/Skills: Experience working with PLC from various manufactures such as Allen-Bradly, GE, Wonderware, etc. Education BS Electrical Engineering or Controls Engineering or Electrical Engineering Technology General understanding of industrial equipment operations. 3 years work experience in Electrical/Controls Engineering of industrial systems Excellent verbal and written communication skills. Experience with documenting designs, using computer aided design systems, for electrical or mechanical, is strongly preferred. Experience with EPlan would be a plus GH Induction Atmospheres offers employees a benefit package including medical, 401(k), and profit sharing. Qualified individuals please email resumes to for immediate consideration.

Job DescriptionDescription: Position Summary: The Frontend Software Engineer Co-op will contribute to the design and development of the user interface for Vuzix’ custom Waveguide Manufacturing Execution System (MES). Vuzix is one of the few organizations in the world capable of mass-producing waveguide-based optical systems, and this role supports the creation of advanced software tools that enable production, quality monitoring, research, and innovation across our manufacturing operations. Working closely with the Staff Software Engineer and members of the broader engineering and research teams, the student will help develop data-driven visualization and workflow tools that improve insight into waveguide manufacturing performance. The role will involve building user-facing features, organizing and presenting complex manufacturing data, and collaborating cross-functionally to ensure information is accessible, accurate, and meaningful for users across the organization — including engineering, operations, and leadership. The systems developed in this role will be actively used in production environments, providing high visibility and real-time impact. This position offers the opportunity to gain significant experience in frontend development, data visualization, and manufacturing systems engineering, supported by mentorship and structured technical guidance. This position will also support the functions of the R&D - Software Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Develop user-facing features using Vue.js., • Work with REST and/or GraphQL APIs to retrieve, manage, and display data., • Design and implement clean, accessible, and responsive UI components., • Debug, test, and continuously improve existing frontend code., • Participate in code reviews, team stand-ups, and collaborative planning., • Work closely with research teams, backend engineers, and product managers., • Write readable, maintainable, and well-documented code that follows best practices., • Hands-on experience building and shipping production-ready software., • Direct exposure to a live manufacturing system used daily by engineers and operators., • Mentorship and guidance from senior developers., • Experience working in a professional Agile engineering environment. To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Currently enrolled in a BS or MS program in Software Engineering, Computer Science, or related field., • Proficiency in JavaScript (ES6+)., • Proficiency in HTML and CSS., • Exposure to a modern frontend framework (Vue.js preferred; React/Angular also acceptable)., • Self-motivated and eager to learn about new tools, technologies, and concepts., • Willingness to embrace Test-Driven Development (TDD) practices., • Comfortable working in an Agile development environment., • Foundational understanding of software architecture and design principles., • Experience with:, • Vue 3 and the Composition API, • TypeScript, • Pinia (or Vuex), • Vue Router, • Tailwind CSS, SCSS, or other CSS frameworks, • Unit testing tools (e.g., Jest, Vitest, Cypress), • Docker, • Working with Python and Django backends., • Basic understanding of accessibility and responsive design principles. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job DescriptionDescription: Position Summary: The Senior Electrical Engineer will work cooperatively with Vuzix team members on the Electrical and other engineering disciplines to deliver complex circuit designs for smart glasses and head-mounted display (HMD) products. Vuzix values individuals that are self-motivated to solve challenges and have a can-do attitude. This position will also support the functions of the R&D – Electrical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Schematic design and PCB layout of digital circuits for smart glasses and head mounted display products., • Work with PCB fabrication and SMT vendors to produce finished PCBAs for prototypes., • Test and debug new hardware for both functional correctness and reliability criteria., • Produce technical documentation for requirements, testing, and validation of designs., • Work with cross-functional engineering teams to develop electronics for highly constrained products., • Participate in cross-discipline design reviews to optimize product implementation., • Meets required ISO 9001:2015 standards and necessary training based on the relevant Quality Objectives. Competencies: To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Bachelor’s degree in Electrical Engineering, Electrical & Computer Engineering, or equivalent technical field., • 6 years’ experience in a relevant technical field., • Strong written and verbal communication skills, including the ability to brief effectively to peers and leadership., • Experience with hardware design from concept to implementation., • Demonstrated experience implementing and debugging high-speed designs., • Understanding of hardware / software interfaces., • Experience with C programming language and microprocessor development., • Experience with Altium Designer for schematic capture and PCB layout, • Experience with soldering and board rework., • Experience analyzing and debugging complex hardware using test equipment such as oscilloscopes, logic analyzers, etc., • Experience working with a multidisciplinary team environment through all phases of product development from initial concept to production release Travel: Up to 5%, with willingness to travel to manufacturing partner locations internationally, if required. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable. Compensation: In compliance with Pay Transparency requirements, the salary range for this role in New York State is $90,000 - $150,000. This is not a guarantee of compensation or salary, as final offer may vary based on various factors including but not limited to experience and geographic location.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Protection & Controls Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 7 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program) The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description Job summary: We are seeking an experienced Optical Design Engineer to lead the design, analysis, and optimization of optical systems for a variety of applications and advanced technologies. This role involves using industry-standard software (Zemax, Code-V, or equivalent) to model, simulate, and optimize optical designs. You will collaborate with cross-functional teams to integrate optical systems with mechanical, electrical, and software components while ensuring designs meet performance requirements and industry standards. Essential Duties and Responsibilities: • Design, analyze, and optimize optical systems using industry-standard software tools such as Zemax OpticStudio, Code-V, or equivalent., • Lead the design and execution of optical system and component testing, ensuring alignment with performance requirements., • Apply a deep understanding of optical principles, theories, and concepts to solve complex design challenges., • Analyze data sets and create tools for effective data visualization and manipulation., • Take a leadership role in guiding technical staff and making significant contributions to project outcomes., • Collaborate in a small, fast-paced team environment, bringing creativity and technical expertise to each project., • Utilize operating systems like Linux and Windows, and be proficient in MS Office (PowerPoint, Excel) and MATLAB., • Present technical results to internal teams, customers, and at workshops/conferences. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills, and Experience: • Bachelor’s or Master’s degree in Optical Engineering, Physics, or a related field., • 5-10 years of experience in optical design, modeling, and simulation., • Proficiency with optical design software (Zemax, Code V, LightTools, etc.)., • Strong understanding of optical principles, including ray tracing, diffraction, and wave optics., • Experience with optical system testing and validation., • Excellent problem-solving and analytical skills., • Strong communication and teamwork skills., • Ability to work independently and manage multiple projects. Syntec Technologies is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, gender, age, disability, protected veteran status, or any other reason prohibited by law.

Job Description About RED-Rochester RED-Rochester LLC, is the primary utility provider and district energy supplier for the 1,200-acre Eastman Business Park, one of the world’s most comprehensive industrial campuses located in Rochester, NY. RED-Rochester owns and operates a highly reliable and efficient utility infrastructure that delivers a full suite of services—utilizing high pressure industrial boilers and a gas turbine-supporting electricity, steam, chilled water, and other critical utilities across the park. These services are distributed through a dedicated microgrid and industrial systems designed to meet the demands of diverse industrial and commercial tenants. RED-Rochester Mission Statement Through our unwavering commitment to safety, reliability, environmental stewardship, and community, we strive to be a trusted utilities provider that drives sustainable development, powers progress and leads the way towards a greener and brighter future. RED-Rochester is looking for a Process & Control Systems Engineer to join its Instrumentation & Controls Team. Essential Duties and Responsibilities • Execute modifications, perform upgrades, and troubleshoot existing control systems., • Design, manage, execute and commission new control system projects., • Identify and implement control system improvement projects to drive continuous improvement in the company operations., • Train and support RED’s I&C technicians on process systems operation, maintenance, and associated instrumentation/final control devices., • Manage data in the OSIsoft PI data collection system—ensure all appropriate data is being collected from utility meters and plant processes, and set up new data points in the PI system to be used in billing, regulatory reporting, energy analyses, etc., • Manage suppliers and contractors to successfully implement instrument/control element installations/replacements, control system projects, and other utility system improvements., • Provide support for ongoing plant control system operations for RED-Rochester’s Steam, Power, and Chilled Water systems and its Water/Wastewater Treatment Plant. Qualifications, • The ideal candidate has a process-oriented background, including familiarity of a variety of mechanical, hydronic, steam, electric and control systems. 2-3+ years experience with Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC) is a plus. Knowledge of Emerson’s Ovation DCS is a plus., • Familiarity & basic experience with control system configuration/programming is required. The ability to learn Ovation DCS control system programming quickly is required., • Knowledge of industrial utility equipment and systems including boilers, turbines, generators, chillers, pumps, cooling towers, air compressors, water systems and water treatment strongly preferred., • Familiarity of industrial instrumentation ad process measurement technologies is required., • Proficiency using technical manuals, wiring diagrams, electrical schematics, ladder logins and functional control diagrams is required, • Familiarity with NFPA, NEC, UL, OSHA, ISA, IEC, and ANSI and other applicable codes/standards for installation of industrial control panels and control systems is a plus. Competencies: • Dedication to customer service and understanding that our most important customers., • Fundamental understanding of electrical, mechanical, and controls systems. A broad, cohesive understanding of many types of systems is preferred over deep understanding of a single type of system., • Ability to work independently and within a team., • Strong analytical and problem solving skills., • Ability to identify new and unique opportunities for process improvements., • Demonstrates a high level of emotional intelligence and is able to communicate in a calm, professional manner in stressful environments., • Able to communicate and explain technical ideas in layman’s terms to assist leadership, end users, and others without technical expertise in making informed decisions., • Able to adjust easily to rapid change, possesses a strong sense of urgency, and is able to work well under pressure., • Technical problem solving, analytical and decision-making skills are required., • Strong attention to detail and strong documentation skills required. Location: Eastman Business Park, Rochester, NY Schedule: This role is performed on day shift, assignment schedule. Setting: Typical industrial office environment. Travel: Limited to travel within the park grounds, as required. Education and Experience: As required by multiple state pay transparency laws, RED-Rochester provides a reasonable range of compensation for each job posting. Actual compensation is influenced by an array of factors including, but not limited to, skill set, level of experience, and specific office location. The range of starting pay for this role is $63,000.00 to $75,000.00 annually. This position is also eligible to participate in the Company’s annual bonus program. Benefits In addition to our competitive compensation practices, we offer a strong benefits package that includes: • A generous time off program, • Upon hire, up to 156 hours of accrued vacation time, • Personal time of 3 days annually, • 10 company-paid holidays, • Annual bonus program (dependent on position), • Medical Insurance, Dental Insurance, and Vision Insurance plans, • Company paid Life Insurance/Short Term Disability/Long Term Disability, • Flexible Spending Account (FSA) and Health Spending Account (HSA) options, • 401(k) with immediate vesting and a competitive company match

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: • Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements., • Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments., • May consult with customer’s technical personnel regarding current and upcoming projects or concepts., • Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Able to make decisions on new production quotes and expansion of product lines for customers., • Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing., • Works with manufacturing, quality, and engineering to reduce non-conforming material., • Provide engineering support and input to departments within company., • Assists manufacturing department in development of processes for production., • Authority to cease or allow production on parts that do not meet specs., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations., • May represent Manufacturing/Management Department on cross-function teams., • When requested, may work on special projects and various related assignments. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Bachelors’ of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience., • The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures., • Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel., • Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office), • Ability to provide feedback to drive behaviors of employees., • Able to deal with a variety of abstract and concrete variables.

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description Are you ready for your next adventure? At Oregon Freeze Dry, innovation isn’t just a buzzword, it’s our foundation. We are a purpose driven company with six decades of expertise in freeze-drying technology. Best known as the makers of Mountain House© meals, we are experts in advanced lyophilization solutions that can help people live healthier lives. Our headquarters in Albany, Oregon sits at the crossroads of science and nature, surrounded by breathtaking landscapes that fuel bold ideas and transformative breakthroughs. We're driven by a commitment to quality, creativity, and continuous improvement, and we're always looking ahead to what's next. We’re proud of our legacy, but our future is even more exciting. If you're passionate and ready to make an impact, Oregon Freeze Dry isn't just a place to work, it's where your adventure begins. We are looking for a Project Engineer II to join the Facilities and Engineering team. In this role, you’ll lead capital projects from concept to completion, advancing new equipment installations and process improvements. You’ll provide hands-on technical support to manufacturing and maintenance, ensuring safe, efficient, and compliant operations across our facilities. The ideal candidate is someone who contributes to continuous improvement initiatives, brings industry experience and knowledge, and strong technical aptitude, and helps elevate our operations. You will get to: • Lead and execute all aspects of capital projects assigned, including developing cost estimates, defining projects scope, capital appropriation requests, creating design specifications, overseeing bidding processes, managing budget and contractors, and coordinating installation, and start-up., • Establishes and maintains viable contractors, vendors, and fabricators., • Research and recommend innovative technologies and equipment solutions to enhance operational efficiency and performance., • Tracks plant utilities and collaborate with local energy groups and maintenance teams to support energy projects and incentives., • Delivers technical support to manufacturing and maintenance teams for the optimization and modification of plant systems, including steam, refrigeration, vacuum, air, and nitrogen, as well as processing and packaging operations., • Ensure all work complies with applicable local, state, and federal codes and regulations, including OSHA, USDA, FDA, UBC, SQF, and ISO standards., • Utilize EAM software to add and update assets and analyze historical data to identify trends and inform project decisions., • Leads the Process Safety Management (PSM) program for the New York site., • Overseas preventative maintenance program for NY location., • Generally, a minimum of three (3) years of experience in project engineering within in the food manufacturing industry., • Bachelor’s degree in Engineering (Chemical, Mechanical, Industrial, or Biomedical) or closely related technical field is required., • Proven experience leading the scope, planning, and execution of capital projects in a food or related manufacturing environment, including cost estimation, financial analysis, and project management., • Strong technical aptitude for designing, developing, and implementing new equipment and processes within a production setting., • Experience leading and/or actively participating in PSM programs., • Proficiency in CAD software for design and technical documentation., • Solid understanding of regulatory and industry standards such as OSHA, FDA, USDA, SQF, and ISO., • Exceptional organizational, analytical, and problem-solving skills with the ability to manage multiple priorities in a dynamic environment., • Self-motivated and able to work independently while collaborating effectively across cross-functional teams., • Experience applying continuous improvement methodologies such as Lean, Kaizen, or Six Sigma to enhance efficiency and performance., • Working knowledge of industrial ammonia refrigeration systems, including troubleshooting and optimization., • Strong computer skills including proficiency in Microsoft Office, PLC programming, and HMI programming., • Must have reliable transportation; and ability to work various hours within a 24/7 environment Thriving together: Your OFD Total Rewards and Benefits: The anticipated base salary range for this role is $80,000 - $100,000 per year. The successful candidate's offer will be based on factors such as location, skills, experience and other qualifications. At Oregon Freeze Dry, we believe that our employees are the key to our success. That’s why we offer a competitive total rewards package aimed at supporting the health, financial security, and overall wellbeing of you and your family. • Customize your healthcare coverage: including medical, dental, and vision options to fit your needs., • Boost your savings: Choose an FSA or HSA for extra flexibility., • Plan for your future: enroll into our 401(k) with employer match and immediate vesting., • Peace of mind: Life and disability insurance to keep you and your loved ones protected., • Furry friends: Pet insurance for your four-legged family members., • Recharge & Refresh: Enjoy paid company holidays, PTO and sick time, • Give back: join us in making a difference with community support opportunities., • Score savings: Unlock exclusive employee discounts and special savings on Mountain House product., • Spread the word: Earn bonuses for referring awesome new team members. Oregon Freeze Dry is proud to be an Equal Opportunity Employer and a Drug-Free Workplace. We value diversity and are committed to providing a safe, inclusive, and respectful environment for all employees. Qualified candidates of all backgrounds are encouraged to apply and will be considered without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, veteran status, or disability. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug screen and background check.

Job DescriptionDescription: Engineering, Technical Support & Troubleshooting (Primary Focus) • Serve as the primary technical resource for designing, troubleshooting, diagnostics, and root-cause analysis of cryogenic, bulk gas, and on-site generation systems., • Perform advanced diagnostics on mechanical, electrical, and control system issues., • Conduct site evaluations, audits, and system assessments to identify reliability, safety, and efficiency improvements., • Develop technical recommendations, scopes of work, and corrective action plans., • Provide engineering-level support to sales, operations, and service teams for complex issues., • Assist with system design, equipment sizing, and configuration., • Support equipment selection, specification, and standardization., • Work with vendors and OEMs to evaluate equipment and alternatives., • Support commissioning, startups, and escalated service issues., • All jobs, site visits, troubleshooting, and evaluations must be logged in Zoho CRM., • The Technical Systems Engineer provides technical leadership and due diligence for equipment selection, systems changes, and vendor proposals., • Technical recommendations are reviewed with executive leadership prior to procurement to ensure alignment with operational, financial, and strategic objectives., • Approved purchases are executed through the Purchasing Agent under established procurement processes., • This role serves as a key technical advisor in purchasing decisions while maintaining clear separation between technical review and financial authorization., • Provides technical support for sales representatives at prospects and existing customers., • Identify and validate leads, • Perform needs assessments for prospects/customers, • Assist with proposal generation, • Develop, design and communicate technical solutions and offerings, • Interface with prospects/customers for technical issuesRequirements:, • Technical or engineering background with strong troubleshooting experience., • Detailed understanding of National Fire Protection Association(NFPA) 99, NFPA 55, and CGA (Compressed Gas Association) requirements., • Hands on experience with cryogenic equipment, pressure piping, compressors, as well as proven ability to troubleshoot system problems., • Ability to read blueprints and design specifications, manufacturer drawings, architectural drawings related to bulk delivery sites associated with customer installations., • Strong mechanical and electrical diagnostic skills., • Ability to read P&IDs and technical documentation., • Ability to read and interpret documents such as safety rules, material safety data sheets, operating and maintenance instructions, and procedure manuals. Ability to perform mathematical calculations. Basic working knowledge of Microsoft Office applications (Excel, Word, Power Point, Outlook)., • Demonstrates a clear and effective speaking manner for the purpose of explaining information to customers and employees. Ability to set goals and manage time to ensure tasks are completed in a timely manner and achievement of goals are accomplished and manage and execute multiple tasks or priorities as necessary Considerable independent judgment and initiative are required in resolving problems and making recommendations; demonstrating tact and diplomacy in dealing with internal and external customers; and handling proprietary information., • Bachelor’s degree in Engineering or 5+ years’ experience in related field., • Valid driver’s license., • 3-7 years supporting industrial systems., • Ability to work independently and under pressure to meet deadlines., • Must possess self-motivation, enthusiasm, a positive attitude and perform as a team player., • 401(k) matching, • Dental insurance, • Disability insurance, • Employee discount, • Health insurance, • Health savings account, • Life insurance, • On-the-job training, • Opportunities for advancement, • Paid time off

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Join our team as a Construction Special Inspector, providing essential inspections and material testing on high-profile commercial projects throughout the Greater Rochester, NY area. Help ensure compliance on some of the regions most exciting construction sites. Responsibilities • Perform tests and inspections for soils, concrete, asphalt, reinforced concrete, masonry, welding & bolting, fireproofing & firestopping, geotechnical investigations, and more., • Read construction drawings and specifications and correctly interpret test results., • Complete assignment accurately and in accordance with appropriate established standards., • Record and report test results in a clear, concise manner., • Communicate regularly with project managers., • Complete field data records and associated reports daily., • HS Diploma required., • Degree in Civil Engineering / Technology, Geology, or related is ideal, although necessary., • Must possess at least one International Code Council (ICC) Certification for one of the following Special Inspector Categories: reinforced concrete, soils, masonry, spray applied fireproofing, steel & bolt or steel & weld, or American Concrete Institute (ACI) Grade 1, or Engineer-in-Training (EIT) Certificate through a State Board., • Ability to maintain effective working relationships with managers, teammates, and clients, through clear communications and proactive progress reporting. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR 9u3Gu5mr6S

Job Description Job Title: QED Optics Manufacturing Engineer Grade: 10 QED Technologies serves the precision optics industry. QED’s customers span the globe and include the world’s leading precision optics manufacturers. Based in Rochester, NY, QED is able to capitalize on the area's academic and industrial resources in the field of precision optics manufacturing and engineering to provide innovative products that set new standards in manufacturing precision optics. Please visit our web site for more information on QED Technologies. Summary Conducts the manufacture of precision optical components for a wide variety of customers by performing the following duties: Quoting • Works closely with customers to gain an understanding of their technical and schedule needs, the details of their application, and any cost / performance trades., • Creates work instructions and monitors their execution by technician staff during optical component fabrication, • Independently executes production work instructions from start to finish, • Drives manufacturing process efficiencies through process parameter optimization, • Designs metrology setups to support full aperture metrology of optical components, including fixturing and tooling that may be required. Develops error budgets to validate optical tests against customer requirements., • Analyzes surface/wavefront data acquired from various metrology setups to optimize process decisions., • Designs fixturing and tooling to support subaperture polishing processes, • Trains others on the proper use and application of metrology and subaperture polishing equipment, • Interacts with other engineering groups (software, systems, optical, mechanical, applications, etc) as needed to support project goals., • Prepares written technical reports and new technical proposals as needed for projects., • Interacts with customers to provide periodic status updates and support technical discussions., • Takes part in authoring technical papers and presenting at conferences. An individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Critical Skills: • Ability and experience with hand tools, measurement devices (calipers, Micrometers, Indicators, Gages etc)., • Understanding of metrology setups and conventional fabrication techniques, • Ability to draft work procedures and coordinate with technicians regarding processes and process improvements Bachelor's degree in Optics, Optical Engineering, Mechanical Engineering or Manufacturing Engineering or related field is preferred; 1 to 2 years of related experience in the aforementioned areas is desired*. (* An equivalent combination of education and experience will be considered.). Computer Skills To perform this job successfully, an individual should have knowledge of the Microsoft Office Suite and Database software. Experience with CAD software to support fixture and tooling design is desired. The manufacturing engineer will be expected to become proficient with QED’s manufacturing and analysis software tools. The candidate should be able to provide a minimum of 2 references. Any technical papers a candidate has authored should also be submitted The position will be based in Rochester, NY. Relocation will not be provided for this position. QED Technologies International is an equal opportunity employer. We value diversity, but due to our ITAR status, we do not provide visa sponsorship. All applicants must be authorized to work in the United States and not require visa sponsorship now of in the future. When not traveling, the Associate Field Service Engineer will be expected to work from the 1040 University Avenue, Rochester, NY location QED offers a generous benefit package which in includes a discretionary bonus.

Job DescriptionDescription: Infrastructure + Mobility Group Manager Transportation Engineering | Project Delivery | People Leadership Lead high-performing teams. Deliver meaningful infrastructure. Shape how communities move. Fisher Associates is seeking an experienced project manager to lead project delivery and people management for transportation planning and design projects across Pennsylvania. This senior leadership role is ideal for a licensed Professional Engineer (PE) with a strong background in transportation engineering, who is ready to step into a visible role focused on project management, team leadership, and client relationships. As the Infrastructure + Mobility Group Manager, you will oversee a team of Project Managers delivering transportation engineering projects for clients such as PennDOT and local municipalities, while directly managing select projects, guiding delivery strategy, and supporting business growth. This role offers the opportunity to influence project outcomes, mentor future leaders, and play a key role in shaping transportation solutions that strengthen the communities we serve. If you are ready to advance your transportation leadership career and make a meaningful impact, we encourage you to apply and start the conversation with us. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as an Infrastructure + Mobility Group Manager • Lead and grow a collaborative, high-performing team aligned with the firm’s mission, values, and commitment to design excellence., • Provide hands-on leadership that empowers Project Managers, supports professional development, and fosters accountability and engagement across locations., • Position the Infrastructure + Mobility group for long-term success through strong team morale, consistent performance, and sustainable growth., • Oversee transportation projects, ensuring clear priorities and delivery on time, on budget, aligned with scope and quality expectations., • Effectively manage project financials, staffing, and schedules while proactively resolving technical, schedule, or budget challenges., • Serve as primary client contact, building trusted relationships and delivering exceptional service to public and private sector clients., • Contribute to business planning and proactively drive new work with existing and prospective clients., • Lead proposal development and participate in interviews, promoting Fisher’s design capabilities and market presence., • Mentor, coach, and set expectations for staff while supporting performance and career development., • Navigate and support complex public processes and municipal approvals related to transportation projects., • B.S. degree in Civil Engineering or related field, • 15+ years minimum in transportation, roadway, or highway engineering, • Professional Engineering License (PE), • 5 years minimum of project management experience, • Strong financial acumen, with the ability to use dashboards, metrics, and data to drive performance, accountability, and results., • Familiarity with PennDOT or PTC design standards required, • Prior experience successfully managing and leading a team, • Excellent leadership, communication, and interpersonal skills, • Proven client relationship and business development success in the transportation sector, • Proficiency in MS Office; Experience with MicroStation preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Superior organizational and planning skills with keen attention to detail, • Highly adaptable and proactive in meeting deliverables and deadlines, • Curious, improvement-minded, and always seeking better solutions, • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams., • Your success is supported by a flexible work environment so you can thrive professionally and personally. Your Impact Matters, Your Career Thrives. Work on engaging transportation projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental and Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholder Opportunity, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate based on any protected status under federal, state, or local law. #LI-Remote #LI-CA1

A Day in Your Life at MKS: As a Manufacturing Engineer you will support and advance our diffraction gratings and precision optics manufacturing operations. This role is ideal for someone who wants to develop deep technical expertise while driving process improvement, automation, yield enhancement, and new product introduction. You will work closely with Operations, Quality, R&D, and Engineering to design robust manufacturing processes that improve performance, reduce cost, and increase capacity in a highly technical production environment. At MKS, our people are the driving force behind everything we do. We are innovators, problem-solvers, and collaborators who thrive on curiosity and continuous improvement. Our technologies enable breakthroughs across industries including semiconductor manufacturing, photonics, advanced optics, clean energy, space exploration, and next-generation communications. You Will Make an Impact By: \n • Develop, optimize, and sustain manufacturing processes for precision optics and photonics products\n, • Design and implement fixtures, tooling, automation concepts, and test methods to improve throughput, quality, and repeatability\n, • Lead continuous improvement initiatives focused on yield improvement, scrap reduction, cycle time reduction, and capacity expansion\n, • Support new product introductions from development through full production ramp\n, • Create and maintain manufacturing documentation including work instructions, process flows, control plans, and validation protocols\n, • Establish and monitor process controls including SPC and mistake-proofing techniques\n, • Troubleshoot process, equipment, and quality issues using structured problem-solving methods\n, • Train and support production operators and technicians on new processes and improvements\n, • Collaborate cross-functionally to resolve technical challenges and implement long-term solutions\n\n Skills You Bring: \n • Bachelor's degree in Mechanical, Manufacturing, Industrial Engineering or related field\n, • 3 + years of manufacturing engineering experience (internships/co-ops included)\n, • Experience working in a production environment with process improvement responsibility\n, • Strong problem-solving skills and comfort working hands-on on the manufacturing floor\n, • Familiarity with Lean Manufacturing principles and continuous improvement tools\n, • Experience with CAD modeling tools (SolidWorks or similar)\n, • Experience creating technical documentation and standard work\n, • Proficiency with Microsoft Office tools\n\n Preferred Skills: (Nice to Have) \n • Experience in optics, photonics, semiconductors, precision manufacturing, or advanced materials\n, • Knowledge of SPC, process capability, and data-driven manufacturing control\n, • Exposure to automation, test systems, or LabVIEW\n, • Familiarity with DOE, FMEA, and root cause methodologies\n\n Globally, our policy is to recruit individuals from wide and diverse backgrounds. However, certain positions require access to controlled goods and technologies subject to the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants for these positions may need to be "U.S. persons." "U.S. persons" are generally defined as U.S. citizens, noncitizen nationals, lawful permanent residents (or, green card holders), individuals granted asylum, and individuals admitted as refugees. MKS Inc. and its affiliates and subsidiaries ("MKS") is an affirmative action and equal opportunity employer: diverse candidates are encouraged to apply. We win as a team and are committed to recruiting and hiring qualified applicants regardless of race, color, national origin, sex (including pregnancy and pregnancy-related conditions), religion, age, ancestry, physical or mental disability or handicap, marital status, membership in the uniformed services, veteran status, sexual orientation, gender identity or expression, genetic information, or any other category protected by applicable law. Hiring decisions are based on merit, qualifications and business needs. We conduct background checks and drug screens, in accordance with applicable law and company policies. MKS is generally only hiring candidates who reside in states where we are registered to do business. MKS is committed to working with and providing reasonable accommodations to qualified individuals with disabilities. If you need a reasonable accommodation during the application or interview process due to a disability, please contact us at: [email protected] . If applying for a specific job, please include the requisition number (ex: RXXXX), the title and location of the role

Job Description Job Summary: The Coating Engineer provides engineering support for vacuum thin-film coating processes used in the manufacturing of optical components. This role working closely with other engineers and manufacturing staff. Essential Duties and Responsibilities: • Provide engineering support for PVD optical coating production, spanning development, production support, and process sustainment., • Work closely with design, and other manufacturing teams to transition coating solutions into stable and repeatable production processes., • Support Operations through guidance on substrate preparation, cleaning methods, coating materials, process parameters, tooling, and manufacturing improvements., • Assist shop-floor personnel with the setup, operation, and interpretation of optical thin-film measurement and characterization tools., • Investigate and resolve coating-related challenges in a production setting, including process evaluation, data analysis, and documentation of findings., • Present technical considerations, risks, and tradeoffs to leadership to aid project planning and operational decision-making., • Enhance coating designs and deposition processes with a focus on yield, performance consistency, scalability, and cost control., • Drive problem-solving and corrective action efforts for coating process issues using structured analysis methods., • Develop and deliver training to technicians on optical coating processes, equipment use, and standard operating practices., • Track process performance and lead initiatives aimed at continuous improvement and manufacturing efficiency., • Support the optimization and troubleshooting of optical coating equipment and associated processes., • Raises individual performance to a level that results in proactive responses to problem solving and continuous improvement., • Performs other related duties and assignments as required, depending on candidate skill set and on an as-needed basis to support evolving business needs. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate. Education, Skills and Experience: • Bachelor’s degree in optical, electrical, manufacturing or mechanical engineering. Experience will be considered in lieu of degree., • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Proficiency in coating design software and optical simulation tools., • Basic analytical skills, including basic statistical analysis., • Basic computer skills, including Microsoft Office and Windows operating systems., • Must possess experience related to troubleshooting and repairing optical coating chambers., • Availability outside of normal business hours to answer technical related questions., • Good oral and written communication skills., • Strong time management skills., • Work independently with minimal supervision.

Job DescriptionAs a member of our Professional Services team, you will assist in the building, deploying, and maintaining of critical customer applications. In this role, you will provide thought leadership and hands-on technical execution to optimize client environments and ensure robust, scalable applications. Responsible for:-Assisting in the designing and building modern and highly scalable cloud-based applications for customers-Migrating and modernizing customer legacy applications using AWS services-Working with Project Managers and clients to provide recommendations and technology roadmaps to meet their business needs-Actively participating in team meetings and cross-functional interactions-Keeping team members and supervisors informed of progress and issues-Actively contributing to client project status meetings-Contributing to R&D projects to validate/invalidate new services offerings-Remaining current with technology trends and new technologies-Proposing the latest technology usage and integration standards-Developing and managing backend infrastructure, APIs and integrations to support cloud-based solutions, using programming languages like Python, Java, and PHP-Participating in code reviews, document infrastructure-as-code, and assist with UI/UX-Building out frontend interfaces and dashboards for applications and infrastructure using languages like Angular and React-Utilizing best practices for security, compliance, and business continuity in cloud solutions How you will be successful:-Bridging the gap between technical complexity and business objectives through adept problem-solving abilities-Building trusting relationships with team members and collaborating departments-Comfortable with pushing boundaries and technical limits (maintain technical aptitude and knowledge of industry)-Confidently communicating with diverse stakeholders to translate requirements into impactful outcomes-Championing ongoing elevation of personal skills paired with knowledge transfer to teammates-Having the ability to rapidly learn new languages, frameworks, or business domains as needed to meet the diverse needs of multiple clients Requirements of the role:-5+ years’ experience as a cloud engineer with hands-on expertise across AWS cloud services-Strong experience with infrastructure-as-code tools like CloudFormation-Experience coding in multiple languages including Node.js, Python, Angular, React, .NET Core, .NET Framework-Experience using AWS platforms including but not limited to Cognito and Amplify-Understanding of modern app architectures in cloud environments-Able to collaborate with cloud engineer and project management teams-AWS Certification(s) a must have (can be obtained upon hire) - minimum requirement at 90 days is AWS Certified Developer Associates-In-depth experience with one or more programming languages like Java, JavaScript, Python, C# used for developing cloud-native applications.-Understanding of cloud computing concepts - IaaS, PaaS, serverless, containers etc.-Working knowledge of Amazon Web Services - key services like EC2, S3, Lambda, API Gateway, ECS, Fargate, RDS etc.-Experience using AWS command line tools and SDKs to manage infrastructure as code-Building, deploying, managing microservices applications on AWS-Working with AWS data storage solutions like DynamoDB, NoSQL, and Aurora RDS-Experience with containers & orchestration platforms like Docker, Kubernetes on AWS Security best practices for applications in the public cloud Additional Valuable Skills: -Experience with CI/CD pipelines and automated testing-Building event-driven architectures on cloud platform-Using infrastructure as code tools like CloudFormation -Frontend JavaScript frameworks like React-Machine learning capabilities like SageMaker-Leveraging serverless architectures where applicable The salary range provided is a general guideline. When extending an offer, Innovative considers factors including, but not limited to, the responsibilities of the specific role, market conditions, geographic location, as well as the candidate’s professional experience, key skills, and education/training. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout us:Aeva’s mission is to bring the next wave of perception to a broad range of applications from automated driving to industrial robotics, consumer electronics, consumer health, security, and beyond. Aeva is transforming autonomy with its groundbreaking sensing and perception technology that integrates all key LiDAR components onto a silicon photonics chip in a compact module. Aeva 4D LiDAR sensors uniquely detect instant velocity in addition to 3D position, allowing autonomous devices like vehicles and robots to make more intelligent and safe decisions. Role Overview:Aeva is seeking to hire a talented and motivated Sr/Staff Hardware Engineer to join our EE HW team. The EE HW team owns the design, build and bring up of Aeva’s mixed-signal PCBs. As a Hardware Engineer, you may be responsible to develop a System Architecture of our LiDAR system based on product requirements. You will be working closely with all EE engineers to define the individual PCBs, their function, and interconnections.What you’ll be doing: • Break down product requirements into an architecture and EE PCB designs and their interconnections, • Work closely with Electrical Engineers as well as cross-functional engineering and product teams to review their designs in terms of function and layout placement, • Optimize architecture to reduce HW and SW complexity as well as optimize for cost and power consumption, • Direct ownership of PCBs and sub-systems of a LiDAR from schematic design through layout, fabrication and bringupWhat you have:, • BS, Masters or PH.D. degree in Electrical Engineering or related field, • 6+ years experience in HW design from architecture to implementation, prototyping and bringup all the way to high volume production, • Deep understanding of HW components, their interfaces and SW controls, • Good understanding of high speed designs with a variety of communication protocols (I2C, SPI, UART, Ethernet, PCIE etc), • Demonstrated experience and technical leadership in data acquisition subsystems including high-speed ADCs, high-precision analog sense paths and high-speed serial interfaces, • Demonstrated experience utilizing commercial SI/PI software tools, • Released several complex, multi-layer PCB designs into high volume production, • Be an active team member working closely with other EE engineers and other groups, • Ability to technically lead a small team of HW engineers is a plus, • Experience in motion control systems, design and theory is a plus

Job Description Systems & Software Engineer Are you a creative problem‑solver with a passion for building smart, intuitive systems? Do you thrive at the intersection of software, automation, and cutting‑edge manufacturing? At OLEDWorks, we’re looking for a Systems & Software Engineer who’s excited to design, develop, and optimize the technologies that keep our production running at peak performance. In this role, you’ll: ✨ Develop custom software that drives automation and data reporting ✨ Architect integrated systems connecting software, hardware, machines, and databases ✨ Troubleshoot, innovate, and continuously improve real manufacturing environments ✨ Contribute to a mission‑driven team shaping the future of lighting technology This position operates within both a production, research, and professional office environment. This role is primarily on-site but does offer some remote work opportunities, subject to manager approval and/or business needs. If you love coding, systems design and seeing your work come to life, you’ll feel right at home here. Ready to make an impact? Let’s build something brilliant—together. We have a hard working and fun team here, consider joining our team today! OLEDWorks is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Job DescriptionWe are seeking a skilled and motivated Data/AI Cloud Engineer to join our team! In this role, you will play a key part in implementing AWS data and AI/ML services, building ETL/ELT pipelines, and developing intelligent data solutions that empower our customers to derive meaningful insights from their data. You will collaborate closely with Cloud Architects and senior technical team members to design and deliver high-quality, scalable solutions — spanning data engineering, machine learning infrastructure, and AI-driven applications — aligned with customer needs. Responsibilities:· Implementing data pipelines using AWS services such as Glue, Lambda, Step Functions, and EMR· Creating and maintaining data extraction, transformation, and loading processes· Configuring and optimizing AWS database services including RDS, Aurora, Redshift, and DynamoDB· Implementing data lakes using S3 and related AWS services· Designing and building production-ready Generative AI applications using Amazon Bedrock and foundation models such as Anthropic Claude· Building and optimizing RAG (Retrieval-Augmented Generation) pipelines with vector databases· Developing AI agents and multi-agent orchestration systems using frameworks like LangChain or LlamaIndex· Writing and testing SQL queries and stored procedures· Documenting technical solutions and providing knowledge transfer to customers· Supporting the implementation of data governance and security controls· Troubleshooting and resolving issues with data pipelines and AI services· Participating in code reviews and implementing feedback· Assisting with proof-of-concept implementations for customer engagements Top candidates will have the following:· Technical familiarity with AWS data and AI/ML services and modern data engineering practices· Hands-on experience with ETL/ELT processes and data transformation· Exposure to Generative AI concepts including LLMs, embeddings, RAG, and agent frameworks· Ability to write and optimize SQL queries across various database platforms· Knowledge of data modeling concepts and best practices· Strong analytical and problem-solving skills· Eagerness to learn new technologies and keep up with cloud and AI innovations· Excellent communication skills with the ability to explain technical concepts clearly· Attention to detail and commitment to solution quality· Collaborative mindset with strong teamwork capabilities· Experience or interest in automation and infrastructure as code Required Experience for the Role:· Must have 5+ years of software engineering experience with at least 2+ years focused on AI/ML, data engineering, or cloud-native development· Must have 2+ years of hands-on AWS experience with production deployments· Must have 1+ years of direct Generative AI experience (LLMs, embeddings, RAG, agents)· Must have a proven track record delivering production AI applications from concept to deployment· Must have strong understanding of software engineering best practices (version control, testing, code review, documentation)· Must have experience working in agile/scrum environments with distributed teams· Must have excellent problem-solving skills and ability to work independently with minimal supervision· Must have strong written and verbal communication skills for client-facing interactions The salary range provided is a general guideline. When extending an offer, Innovative considers factors including, but not limited to, the responsibilities of the specific role, market conditions, geographic location, as well as the candidate’s professional experience, key skills, and education/training. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: DiMarco Constructors is seeking a Project Engineer to support field operations and project management teams on commercial construction projects. Summary: A construction project engineer manages small groups of subcontractors and assists in the planning, directing and supervision of large construction projects. Construction project engineers operate as part of the overall project management team. They creatively/effectively serve as the liaison on construction projects to make sure the project is safe and runs as smoothly as possible. Essential Functions: • Work directly with the Project Executive, Superintendent, and Project Foreman to ensure the needs of the construction project are effectively meet in a timely fashion., • Assist with planning, implementing and manage construction tasks in accordance with scheduled milestones., • Assist superintendent with the managing of the subcontractor workforce. This includes but is not limited to daily badging/collecting manpower logs from Subcontractor’s site foreman., • Project Engineers assist with reviewing/understanding drawings and designs before being built/installed on the project., • Project engineers will learn a basic understanding of contract plans, construction specifications, subcontractor scopes as well as Exhibit 3’s., • ·Assist Site Superintendent by completing professionally written correspondence. These include but are not limited to: daily journals, requests for information, potential change requests, non-compliance forms, meeting minutes and emails. CMiC our site management software, is where daily correspondence and all other correspondence will be recorded., • Responsible for photographing daily progress which can be taken using OpenSpace. Responsible for completing weekly 360 OpenSpace Captures and uploading all photos and captures into CMiC to comply with the daily requirements., • Participates in weekly meetings with Subcontractors, Owners, Architects, Engineers, and DiMarco, • Provide necessary status updates and assists in responding to questions from clients, subcontractors, and DiMarco leadership regarding schedule/milestones. Up-to-date knowledge or project schedule status and milestones will be required., • Support field team in the managing the submittal process. This including but not limited to: collecting samples, product data, shop drawings, mock-up, and technical data from subcontractors that is required by the owner/architect to review for approval., • Compliant in OSHA 30 and walk thru jobsite and review and report any non-compliant and unsafe conditions., • Responsible for working with the Logistics & Procurement Team on Long-Lead Items to identify potential issues with meeting project milestones/deadlines., • Provide support to the field team in completing quality control walks and create/review punch lists per contract requirements and DiMarco standards., • Ability to navigate entire job site, including stairs or other elevated structures., • Proficient knowledge for daily usage of MS Project and MS Office., • Tactfully assists in managing difficult situations with clients, subcontractors, and coworkers; Responds promptly to the needs of clients, subcontractors and coworkers., • Maintains confidentiality; Keeps emotions under control; Remains open to others' ideas and willing to explore and try said new ideas and ways of thinking., • Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Manages competing demands; Able to deal with frequent change, delays, or unexpected events., • Follows instructions, responds to management direction; Takes responsibility for own actions; Completes tasks on time or notifies appropriate person with an alternate plan., • Volunteers readily; Takes on self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed., • Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • This position involves work on construction site where duties will be performed both indoors and outdoors, • While performing the duties of this Job, the employee is regularly required to stand and walk; Duties of the job may also require employee to sit in some instances., • The employee must have use of their arms and legs., • The employee must be able to climb or balance; Bend, kneel, crouch, or crawl., • The employee must be able to effectively communicate by voice as well as hear., • Construction degree or equivalent experience considered Requirements:

Job Description Job Summary: We are seeking an Optical Systems Automation Engineer to design, implement, and maintain automated systems for optical alignment, calibration, and test of imaging and optical assemblies. This role bridges optics, motion control, machine vision, and software, enabling scalable, repeatable, and high-yield manufacturing of optical systems and camera modules. Essential Duties and Responsibilities: Optical Automation & Alignment • Design and implement automated optical alignment systems (active and passive), • Develop focus, centering, tilt, and spacing alignment algorithms, • Integrate cameras, light sources, collimators, targets, and metrology tools, • Optimize alignment speed, accuracy, and yield for production use Test & Calibration Systems • Develop automated optical test stations (MTF, SFR, distortion, FOV, CRA, focus), • Implement calibration routines for imaging systems and optical assemblies, • Automate pass/fail criteria, data capture, and traceability, • Support thermal, vibration, and environmental test automation as needed Software & Controls • Develop automation software (Python, C/C++, LabVIEW, or similar), • Interface with motion controllers, PLCs, frame grabbers, and DAQ hardware, • Implement closed-loop optimization using image-based feedback, • Develop GUIs and operator workflows for manufacturing environments Manufacturing Integration • Transition automation from lab to pilot line to production, • Support yield improvement, cycle time reduction, and process stabilization, • Develop fixtures, tooling, and work instructions, • Support GR&R, Cp/Cpk, and process capability studies Cross-Functional Collaboration • Work closely with optical design, camera systems, mechanical, and quality teams, • Support DFM/DFA decisions related to optical tolerances and assembly strategy, • Troubleshoot optical, mechanical, and software issues in production Education, Skills and Experience: • Bachelor’s or Master’s degree in Optical Engineering, Physics, Mechatronics, Robotics, or related field, • 5+ years experience in optical systems automation or optical manufacturing, • Strong knowledge of optical fabrication, coatings, assembly, and testing methods., • Familiarity with optical design software (Zemax, Code V) or metrology systems (interferometry, profilometry, MTF testing)., • U.S. citizenship or permanent residency required (ITAR compliance)., • Strong understanding of Optical alignment principles and tolerancing, Imaging performance metrics (MTF/SFR, distortion, focus), Motion control systems (stages, encoders, actuators).

Job Description800x600 Normal 0 false false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Title Quality Engineer Department Quality Reports to Director, Quality & Product Assurance SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Engineer will be responsible for providing high level technical support for RPO’s QC Inspection area and departmental quality functions. Performs and trains others in QC test and inspection processes and makes decisions on product and process acceptability. Recommends appropriate test and measurement equipment and arranges for equipment calibration. May work in a cleanroom environment and low-light areas. Provides Quality Assurance technical support for all aspects of the RPO ISO 9001 quality management system, including evaluation of requests for quotation, setting up the QA support for new jobs, supporting existing jobs, records management, and document writing. Participates in internal quality audits, interacts with suppliers, customers, external auditors, and co-workers to provide support as needed. You will: · Explain and interpret ISO 9001 QMS requirements as they pertain to RPO and its products, processes and services. · Explain and interpret optical and mechanical drawings, specifications, standards, purchase orders and contracts extracting the essential information for QA support and risk analysis. · Clean, inspect and evaluate assigned product(s) to specifications and requirements. · Lead and participate in internal audits. · Provide QA Engineering support for production, prototype and engineering activities including risk analysis, quoting, quality and test plans, inspection and testing, data gathering and analysis, sample submissions, performance reporting, project close-out, etc. · Selection and calibration of inspection and test equipment, working with equipment and calibration suppliers. · Review, disposition and process RMAs. · Lead and participate in DOEs, FMEAs, DFMs, DVT, DFM, Lesson’s Learned and other activities · Train others in the use of inspection and measuring equipment, testing, SPC and other subjects · Write inspection instructions and quality / test plans including test and measuring equipment usage procedures and procedures requiring customer approval. · Perform / coordinate environmental, durability, reliability and other testing as needed. · Assemble and submit FAI and other sample packages · Review and approve Supplier FAI and other sample Packages. · Work with Supply Chain to improve and control RPO supply base. · Issue, manage, validate and close CAPAs. · Create, manage and participate in ECOs. · Implement and manage RPO document control system. · Interact professionally with Manufacturing, Sales, Purchasing, Engineering, customers, suppliers, and all other individuals as required. · Identifies and recommend improvement opportunities. · Engage in quality improvement assigned projects. · Other duties as assigned You have: · Associate’s degree required in Quality, Engineering, Engineering Technology, or a closely related technical discipline. · Bachelor’s degree strongly preferred, particularly in Engineering, Quality, or Applied Sciences. · Minimum of 5 years of progressive, hands‑on quality experience within manufacturing, optical, aerospace, or precision‑engineering industries. · Demonstrated track record of increasing responsibility in quality systems, process control, or product assurance. · ASQ certifications (CQE, CQA, CQT, CSSGB, etc.) are highly advantageous. · Proficiency with quality inspection equipment and inspection methodologies. · Strong computer skills, including Microsoft Office; Minitab preferred. · Ability to interpret optical and mechanical drawings, engineering standards, and technical specifications. · Working knowledge of ISO 9001, AS9100, AS9102, MIL‑STD‑810, MIL‑PRF‑13830, ISO 10110, and other relevant industry standards. · Understanding of APQP, PPAP, FMEA, DVT, DFM, DOE, Gage R&R, Measurement Analysis, SPC, Six Sigma, Lean Manufacturing, 5S, DMAIC, PDCA, FAI, and related quality methodologies. · Experience with environmental and performance test equipment, including thermal, salt, and humidity chambers. · Familiarity with government property control requirements. You Are: · Results-Oriented: Motivated, hard-working and ready to level-up. · Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge. · Process Oriented: Well organized, demonstrating attention to detail. · Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude. · Accountable: Demanding the highest quality from yourself and team members. · Detail-Oriented: Have excellent time management and organizational skills. · A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. · A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: While performing the duties of this job, the employee is regularly required to stand: use hands and fingers to handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouchThe job may involve prolonged periods of sitting/standing.Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus and see colors. May involve prolonged periods of magnified inspection (eye strain)Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp.The employee is frequently required to use the computer.May involve the use of oils and solvents.Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided)Generally works in a clean environment and works to maintain the environment as such.Safety Glasses are required in specific areas.May require area specific safety trainingThis position works in a manufacturing environment. The noise level in the work environment is usually moderate-loud. The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles.May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: · Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program.· Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans.· Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance.· Balance: 11 paid holidays, generous paid vacation and sick time· Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday, 7am - 3:30pm Compensation details: 85000-95000 Yearly Salary PI5c5f2dd62625-25405-39949690

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Transmission Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Conductor Selection, • Structure recommendations, • Insulation, A/C interference, static wire, grounding studies, • Line Design: Plans and Profiles, Cross section details, • LiDAR and aerial photo data, • Utilization of wetlands, vernal pool and sensitive resource data in line and structure design and placement, • Detailed estimate and probability modeling, • Other studies as required to complete the projects, • Lead overall transmission line design for all capital projects, • Review/Design transmission line plan and profile drawings using PLSCAD to ensure compliance with Avangrid TM standards and NESC/other standards, • Drive the project plan for transmission line routing and strategy, specifically:, • Decide whether to rebuild existing lines or obtain additional right of way based on area congestion and local politics/permitting issues, • Determine required structure designs based on design constraints, • Bachelor of Science in Electrical Engineering or related degree from an ABET accredited program., • 5+ years of electrical engineering experience within transmission lines, • Perform engineering responsibilities without assistance and minimal supervision, • Strong knowledge in standard engineering techniques and procedures Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program) The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description About the Role: The Industrial Engineer position comprises of a balance of technical expertise in data/metric analysis with a strategic drive to create value through process improvements, cost reduction and product improvement. The Industrial Engineer is instrumental in achieving operational excellence through innovation, development, evaluation, and implementation of superior methods and systems. The Industrial Engineer will partner with leadership throughout the organization to understand their business needs and put them in the best position for success by delivering robust continuous improvement plans. What You’ll Be Doing: • Lead the identification, evaluation, and implementation of automation opportunities across molding, assembly, machining, material handling, and secondary operations to improve safety, throughput, and cost competitiveness, • Act as a change agent for digital transformation, promoting a data-driven culture and training teams on new automated and connected manufacturing technologies, • Serve as the plant technical owner for Industry 4.0 initiatives, including data connectivity, machine monitoring, and digital workflows that enable real-time visibility into production performance, • Partner with Operations, Maintenance, IT, and Quality to integrate equipment, sensors, and control systems with existing manufacturing execution, maintenance, and reporting platforms, • Develop and standardize digital work instructions, automated data capture, and electronic production reporting to reduce manual inputs and improve data accuracy, • Support capital investment planning by building automation business cases, including ROI analysis, payback modeling, and risk assessment, • Drive continuous improvement through the use of manufacturing data analytics, identifying trends, constraints, and opportunities for process optimization, • Support new program launches by ensuring automation readiness, scalable cell design, and alignment with future-state manufacturing strategy, • Work closely with Finance to maintain BOM system, including the creation of new BOMs and revision of current BOMs., • Develop and implement Machine Operator Training Program., • Initiate, update and maintain Machine Operator work instructions on a daily basis., • Work actively on continuous improvement projects that involve the entire organization such as Kaizen, 5S, Lean Manufacturing and Visual Recorder., • Work with Manufacturing and all other facets of the organization to improve all ergonomic conditions on presses and machinery, while anticipating/evaluating hazardous conditions by identifying them prior to accident occurrence., • Coordinate Safety initiatives and lead Company to resolution on environmental, health and safety issues., • Provide guidance for packaging engineering methods and standards on a daily basis. Work with customers to define standard packs and returnable packaging. Work with customers to define and develop alternative packaging. We would love to hear from you if: • Bachelor’s Degree (B.A./B.S.) from four-year college or university; or two to four years of related experience and/or training; or equivalent combination of education and experience. Technical Skills • Proficiency in CAD software (SolidWorks, NX or equivalent) for layout design, automation cell concepts, tooling fixtures, and process documentation, • Working knowledge of PLC-controlled equipment and industrial controls, with the ability to interface effectively with OEMs, integrators, and maintenance teams for troubleshooting and system optimization, • Experience developing or supporting automated manufacturing cells, including robotics, conveyors, vision systems, or automated assembly equipment, • Strong understanding of industrial networks and data connectivity to support machine integration and data capture, • Ability to interpret and develop electrical schematics, P&IDs, and control narratives, • Familiarity with manufacturing data systems such as MES, machine monitoring platforms, CMMS, or ERP integrations, • Experience with capital equipment specification, FAT/SAT, commissioning, and validation, • Advanced Excel skills and comfort working with manufacturing data analytics tools (Power BI, SQL, or similar preferred), • Exposure to robot programming or structured automation programming standards, • Understanding of cybersecurity considerations in connected manufacturing environments Language Skills: Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers and the general public. Mathematical Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: • Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements., • Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments., • May consult with customer’s technical personnel regarding current and upcoming projects or concepts., • Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Able to make decisions on new production quotes and expansion of product lines for customers., • Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing., • Works with manufacturing, quality, and engineering to reduce non-conforming material., • Provide engineering support and input to departments within company., • Assists manufacturing department in development of processes for production., • Authority to cease or allow production on parts that do not meet specs., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations., • May represent Manufacturing/Management Department on cross-function teams., • When requested, may work on special projects and various related assignments. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Bachelors’ of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience., • The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures., • Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel., • Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office), • Ability to provide feedback to drive behaviors of employees., • Able to deal with a variety of abstract and concrete variables.

Job DescriptionSenior Substation Engineer Senior Substation Engineer Rochester, Syracuse, Binghamton, or NYC Description We are seeking a Senior Substation Engineer to join our growing team. The Senior Substation Engineer is required to work within a multi-discipline team to design efficient and reliable electrical substations. The engineer will coordinate his/her design activities to maintain project schedules and ensure successful project completion. The engineer will also assist the Estimating Team in preparation of estimates and project proposals. Aside from engineering duties, we are looking for the incumbent to be able to provide a presence to our area clients. We are looking for someone to be our "face" to the client. Significant client face time and interaction is required. A strong business sense would be beneficial. This position is accountable to provide design activities in accordance with applicable codes and standards, including our policies and procedures, such as Safety, Environmental, Quality Assurance and Quality Control. Specific duties include: • Prepare conceptual design of the complex projects, • Carry out/review/analyze complex technical studies and project scopes, • Preparation of project specifications for material and equipment purchase and installation., • Review the design based memorandum, detailed engineering scope and guide the assigned discipline engineers to align the engineering deliverables per project requirements., • Work closely with peers to ensure accurate delivery and thorough electrical design that will meet industry standards and specifications, and meet good engineering practices., • Design of electrical substation facilities including site and bus work layouts, ground grids, conduit layout, lightning protection, control house design, lighting studies, and metering., • Review of internal and external designs for code compliance, good design practice and constructability., • Resolving site queries, attending site meetings and performing site inspections during the construction phase of projects., • Maintaining complete project documentation with respect to substation design and construction, including all completion packages, as-built requirements and return data information., • Making and maintaining appropriate commitments to project teams and coordinating design activities with multi-disciplined project team members., • Maintaining good working relationships with internal groups that support projects., • Maintaining good working relationships with material suppliers, contractors, and any others that affect the quality, schedule and cost of projects., • Mentoring and providing guidance to developing engineers within the department., • Experience with Autodesk Inventor and Substation Design Suite (SDS) is a strong plus., • Experience with WinIGS and CYMCAP is preferred, • Strong client focus., • A degree Electrical Engineering from a recognized institution., • Professional Engineering (PE) License We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 05/27/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Location: New York, NY Start date: ASAP Languages: English (required) About the Role Pragmatike is hiring on behalf of a high-growth AI cybersecurity company backed by top-tier investors and strategic AI leaders. The company is building the security layer for the AI era, protecting enterprises against AI-powered threats such as deepfakes, smishing, and synthetic voice attacks. Following a major Series B funding round led by industry-leading AI and venture partners, the company is entering a critical growth phase. Trusted by major banks, technology companies, and healthcare organizations, they are scaling rapidly to meet enterprise demand in a $200B+ market opportunity. We are looking for a Staff Machine Learning Engineer to define and build the companys ML capabilities from the ground up. ML is central to the product vision. This role is not about incremental optimization — it is about owning the strategy, infrastructure, and execution of machine learning across the organization. There is currently no dedicated ML infrastructure or ML team. You will establish the foundations: define where ML drives product value, design production systems end-to-end, and set the technical direction for how ML evolves across the company. This is a high-impact, highly autonomous role suited for someone who has built ML systems in production and is ready to architect an ML function from zero to scale. What Youll Do * Define the companys ML strategy: where ML should be applied across products, what infrastructure is required, and how to approach build vs. buy decisions. * Design and build production ML systems end-to-end — including data pipelines, model training workflows, evaluation frameworks, and inference serving. * Establish rigorous evaluation methodology to measure model quality, detect regressions, and support data-driven iteration. * Own the data strategy: determine what data is needed, how it should be labeled, how feedback loops are structured, and how models continuously improve. * Partner closely with product and backend engineers to integrate ML into customer-facing systems. * Write production-quality code within the existing codebase and contribute to architectural decisions. * Over time, help recruit, mentor, and lead the ML team as the function expands. What Were Looking For * 8+ years of experience building ML systems in production environments. * Experience standing up ML infrastructure at an early-stage startup or serving as the senior/lead ML engineer at a company. * Strong software engineering fundamentals with production experience in languages such as Python, Java, or TypeScript. * Experience with cloud-based ML infrastructure (e.g., SageMaker, Bedrock, Modal, Baseten, or similar platforms). * Hands-on experience with ML and data frameworks such as PyTorch, TensorFlow, Spark, or equivalent tools. * Comfortable working across the stack — infrastructure, backend systems, and data platforms. * Demonstrated ability to mentor engineers and elevate technical standards within a team. * High autonomy and ownership mindset, with the ability to define direction and execute without predefined playbooks. Bonus Points * Experience building ML systems for security, fraud detection, or adversarial environments. * Experience working with LLMs in production (evaluation, fine-tuning, retrieval systems, guardrails). * Background in real-time inference systems or high-throughput distributed systems. * Experience making strategic build vs. buy infrastructure decisions. * Previous startup experience in high-growth environments. Why This Role Will Pivot Your Career * Strategic AI backing: Supported by leading AI and venture investors shaping the future of AI infrastructure and cybersecurity. * Founding-level impact: Build and define the ML function from zero in a company where ML is core to product value. * Enterprise traction: Products already trusted by major banks, tech firms, and healthcare organizations. * Massive market opportunity: Positioned in a rapidly expanding AI cybersecurity space. * Leadership path: Opportunity to evolve into Head of ML as the organization scales. * Ownership & autonomy: Direct influence over architecture, infrastructure, and long-term technical direction. Benefits * Competitive salary & equity options * Health, Dental, and Vision * 401k * Hybrid flexibility Pragmatike is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all applicants without discrimination. We recruit on behalf of our clients and prohibit discrimination and harassment based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.We are committed to a fair and inclusive hiring process. We process your personal data solely for recruitment purposes, in accordance with applicable privacy laws, and maintain reasonable safeguards to protect your information. Your data may be shared with our client(s) for hiring consideration, but will not be disclosed to third parties outside of the recruitment process.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Lead Protection & Control Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 10 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD, • IEC 61850/Goose experience required, • PE preferred Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program) The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description Title Coating Engineer (Thin Films) Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: The Coating Engineer position is responsible for supporting the vacuum thin film coating manufacturing of both catalog and specialty optical components and includes interacting with other engineers and manufacturing staff. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Support the manufacturing of PVD thin film coatings in all directions., • Collaborate with R&D and manufacturing to ensure successful implementation of coating designs., • Provide technical support to Operations on proper substrate handling, cleaning techniques, coating materials, coating designs, coating tools and continuous improvement of manufacturing methods., • Assist manufacturing staff in the operation and utilization of metrology instruments for thin film characterization., • Identifying and diagnosing issues on the production floor, as well as collecting and preparing supporting data, especially with regards to coating equipment and processes., • Provide management with technical tradeoffs and risks pertaining to project work as well as general engineering efforts such that management may make informed decisions., • Improves coating designs and processes for manufacturability, performance, and cost., • Leads root cause analysis / corrective action activities for coating related processes., • Trains technicians on the execution of optical coating manufacturing processes., • Monitors and drives continuous improvement of manufacturing processes., • Supports troubleshooting of existing optical coating equipment and processes. You Have: • Bachelor of Science in Optical, Electrical, or Mechanical Engineering, or alternatively Physics or Materials Science. Minimum of 2 years experience in optical thin film coating design and manufacturing. • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage. Proficiency in coating design software and optical simulation tools. * Strong analytical and problem-solving skills; ability to manage multiple complex projects. * Excellent communication skills, both written and verbal. • Excellent computer skills – Email, MS Word, MS Excel, ERP system, • Experience reading and interpreting technical drawings and engineering specs You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: * While performing the duties of this job, the employee is regularly required to use hands and fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear * The job may involve prolonged periods of sitting/standing. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain). * Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. * Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) * Generally, works in a clean environment and works to maintain the environment as such. * Safety Glasses are required and may require area specific safety training. * This position works in a manufacturing environment. The noise level in the work environment is usually loud. * The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles. * May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday 7am - 3:30pm

Job DescriptionDescription: Position Summary: The Staff Manufacturing Engineer will play a pivotal, hands-on role in developing, refining, and elevating Vuzix’s manufacturing operations. This includes deep engagement with production processes, active participation in the design and development of custom machinery and tooling, and close collaboration with cross-functional teams to diagnose and resolve challenges related to materials, workflow efficiency, equipment performance, and overall product manufacturing. Apply structured problem-solving and data-driven analysis to troubleshoot complex assembly issues, identify root causes, and implement effective corrective and preventive actions aimed at reducing defects and strengthening process robustness. This position will also support the functions of the WG Engineering Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties & Responsibilities: • Design, refine, and optimize manufacturing and assembly processes, transforming bills of materials into high-quality finished products while ensuring repeatability, robustness, and efficiency., • Leverage data analysis, validation methods, and advanced inspection techniques to identify variation, drive measurable process improvements, and enhance product quality., • Develop innovative tooling and fixturing solutions that support assembly operations, streamline workflow, and improve overall process capability and throughput., • Document and implement Corrective and Preventive Actions (CAPA) using structured problem-solving methodologies to address root causes and prevent recurrence., • Create, validate, and continuously improve assembly work instructions, ensuring they are clear, accurate, visually effective, and aligned with best manufacturing practices., • Support daily production floor needs while also contributing to longer-term engineering development initiatives, balancing immediate priorities with strategic improvements., • Apply waste-reduction principles and productivity-enhancement methods, such as lean manufacturing tools, to improve flow, minimize non-value-added activities, and strengthen operational performance., • Meets required ISO 9001:2015 standards and necessary training based on the relevant Quality Objectives. Competencies: To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Bachelor’s degree (BA/BS) in Mechanical Engineering, Manufacturing Engineering, or related discipline., • 4+ years of experience in new product introduction (NPI) and sustaining engineering, including support of products from prototype through full-scale production., • Strong understanding of core manufacturing techniques, including mechanical fastening, structural adhesive bonding, hand-assembly methods for low-volume production, use of standard assembly tools, and functional product testing practices., • Demonstrated experience performing precision alignments and conducting tolerance analyses to ensure repeatable and high-quality assemblies., • Hands-on experience with additive manufacturing/3D printing for creating assembly aids, fixtures, jigs, and other support tooling used on the manufacturing floor., • Familiarity with process-improvement methodologies and process-control practices, with the ability to identify and reduce sources of variation., • Working knowledge of incoming inspection and validation techniques, including optical inspection methods, CMM measurement, and other dimensional verification tools., • Basic understanding of ERP system requirements, including how to manage product specifications, bills of materials (BOMs), and routing information., • Experience in complementary disciplines, such as computer/data acquisition systems, optical component handling, or related technical fields., • Proficient with SolidWorks and Product Data Management (PDM) systems, with the ability to develop models, drawings, and documentation to support manufacturing activities., • Practical experience integrating automation into manufacturing, such as robotic handling, metered dispensing systems, PLC-based equipment, and vision-system applications used to improve throughput and consistency., • Knowledge of Six Sigma principles and analytical tools for process characterization, defect reduction, and statistical process control. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable. Compensation: In compliance with Pay Transparency requirements, the salary range for this role in New York State is $80,500 - $95,500. This is not a guarantee of compensation or salary, as final offer may vary based on various factors including but not limited to experience and geographic location. Equal Employment Opportunity: Vuzix is committed to a policy of Equal Employment Opportunity with respect to all employees, interns, and applicants for employment. Consistent with this commitment, our policy is to comply with all applicable federal, state, and local laws concerning employment discrimination.

Job DescriptionInnovative Solutions is an AWS Premier Tier Services Partner with AWS Competencies in Generative AI, Migrations, DevOps, and Networking. We specialize in helping businesses transform their IT infrastructure through AWS cloud migrations, managed services, application modernization, and cloud operations. Our mission is to help organizations transition IT spend from merely supporting their business to strategic investments that acquire new clients, retain existing customers, and drive profitability year over year. The RoleWe are seeking a talented DevOps Engineer to join our professional services engineering team. You'll work directly with mid-sized clients to design, implement, and optimize AWS infrastructure solutions across multiple concurrent projects. This role requires a blend of technical expertise, project execution skills, and client-facing communication abilities as you help our clients leverage the power of the cloud to drive business growth. *This role has quarterly travel to our Rochester, NY Headquarters Key Responsibilities:· Design and implement scalable, secure AWS infrastructure using Infrastructure as Code (IaC) practices across multiple client engagements simultaneously. · You'll build CI/CD pipelines, automate deployment processes, and establish monitoring and observability solutions that enable clients to operate efficiently in the cloud. · Working closely with solutions architects and project managers, you'll translate client requirements into technical solutions while maintaining high standards for security, reliability, and performance.· Collaborate with client technical teams to implement DevOps best practices, troubleshoot complex infrastructure issues, and provide knowledge transfer to ensure long-term success. · You'll balance multiple project priorities, adapt to varying client environments, and contribute to our internal tooling and methodology improvements. · Your work will directly support our AWS DevOps Competency and help clients achieve their digital transformation objectives. Key Required Skills and Experience:AWS Platform Expertise· 3+ years of hands-on experience with core AWS services including EC2, ECS/EKS, Lambda, RDS, S3, VPC, IAM, CloudWatch, and Systems Manager· Strong understanding of AWS networking, security groups, NACLs, and connectivity patterns· Experience designing highly available, fault-tolerant architectures aligned with AWS Well-Architected Framework principles· Knowledge of AWS security best practices and compliance frameworks (SOC 2, HIPAA, PCI-DSS)· Infrastructure as Code· Proficiency with Terraform or CloudFormation for infrastructure provisioning and management· Version control expertise with Git and branching strategies· Experience with workload migrations in AWS· Experience in modernization of legacy applications to natively run on AWS· Ability to create reusable, modular infrastructure code· CI/CD & Automation· Hands-on experience building and maintaining CI/CD pipelines using tools like Jenkins, GitLab CI, GitHub Actions, AWS CodePipeline, or CircleCI· Strong scripting abilities in Python, Bash, or PowerShell· Experience with build tools and artifact management· Understanding of deployment strategies (blue/green, canary, rolling updates)· Working knowledge of Docker containerization· Experience with container orchestration platforms (Kubernetes/EKS, ECS)· Understanding of service mesh and microservices patterns· Familiarity with container security and image management· Monitoring & Observability· Experience implementing monitoring solutions using CloudWatch, Prometheus, Grafana, or Datadog· Log aggregation and analysis using tools like ELK stack or CloudWatch Logs Insights· Ability to establish SLIs, SLOs, and alerting strategies· Experience with distributed tracing and application performance monitoring· Professional Services Experience· Demonstrated ability to manage multiple client projects simultaneously· Strong verbal and written communication skills with both technical and non-technical stakeholders· Experience documenting technical solutions, runbooks, and operational procedures· Comfortable working in fast-paced, dynamic environments with shifting priorities· Client-facing experience with ability to build trust and credibility Preferred Qualifications· Experience with serverless architectures and event-driven patterns (Lambda, Step Functions, EventBridge)· Knowledge of database administration and performance tuning (RDS, Aurora, DynamoDB)· Familiarity with security scanning tools and vulnerability management· Background in Agile/Scrum methodologies· Previous consulting or professional services experience· Contributions to open-source projects or technical communities· Experience with cost optimization and FinOps practices· Knowledge of disaster recovery and business continuity planning Certifications AWS certifications demonstrate commitment to the platform and are highly valued at Innovative Solutions. While not all certifications are required at hire, you'll be expected to obtain relevant AWS certifications as part of your professional development:Required Within First Year:AWS Certified Solutions Architect – Associate (or equivalent Associate-level certification) - Required upon hire or within 90 daysAWS Certified DevOps Engineer – Professional - Required within 12 months of hire Additional Valuable Certifications:AWS Certified Security – SpecialtyAWS Certified Advanced Networking – SpecialtyAWS Certified CloudOps Engineer – AssociateCertified Kubernetes Administrator (CKA)HashiCorp Certified: Terraform Associate Success MetricsYour success in this role will be measured by:Customer Satisfaction & Stakeholder Alignment - Building strong client relationships and delivering solutions that meet or exceed expectationsTimely and On-Budget Delivery - Successfully managing project timelines and resource allocation across multiple engagementsTechnical Excellence - Implementing scalable, secure, and well-architected solutions that follow AWS best practicesKnowledge Transfer - Effectively enabling client teams to operate and maintain solutions independentlyContinuous Learning - Obtaining AWS certifications and staying current with emerging cloud technologiesTeam Contribution - Contributing to internal tooling, documentation, and methodology improvements What We OfferOpportunity to work with diverse clients across multiple industriesHands-on experience with cutting-edge AWS technologies and servicesProfessional development support including AWS certification training and exam feesCollaborative team environment with 100+ cloud-certified professionalsCareer growth opportunities within a rapidly growing AWS Premier Tier Services PartnerExposure to complex, challenging projects that make a real business impact We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary, • Dental insurance, • Flexible schedule, • Health insurance, • Opportunity for advancement, • Paid time off Role Description This is a full-time hybrid role for a Systems Engineer II at Info Advantage Inc. As a mid-level engineer in our MSP environment, you will serve as a "jack of all trades" resource, balancing hands-on technical work with customer support and project execution. Your days will varyfrom configuring firewalls and deploying servers to troubleshooting end-user issues and leading cloud migrations. This role is ideal for someone who thrives in a dynamic environment, enjoys solving diverse challenges, and isnt afraid to get their hands dirty. Key Responsibilities: Infrastructure Deployment & Management: • Configure and maintain firewalls, switches, and wireless access points (e.g. UniFi, Fortinet, SonicWALL)., • Deploy and manage on-premises and cloud servers (Windows Server, Hyper-V, VMware)., • Implement and troubleshoot backup/disaster recovery solutions (Veeam, Azure Backup, etc.).Microsoft Modern Work Solutions:, • Administer EntraID (Azure AD), including identity management, conditional access, and SSO., • Manage endpoints via Microsoft Intune (policies, application deployment, Autopilot)., • Support Microsoft 365 workloads (Exchange Online, SharePoint, Teams).Cloud & Virtualization:, • Assist with cloud migrations (Azure, ) and hybrid environment setups., • Optimize virtualized environments (VMware, Hyper-V) for performance and scalability.Customer Support & Projects:, • Provide escalated technical support for clients, resolving issues ranging from network outages to user access problems., • Lead or contribute to projects like office relocations, hardware refreshes, and security upgrades.Documentation & Best Practices:, • Maintain detailed documentation for systems, processes, and client environments., • 3+ years of experience in systems engineering, preferably in an MSP or IT services environment., • Proficiency in Microsoft stack (Windows Server, EntraID, Intune, M365)., • Hands-on experience with networking (firewalls, VLANs, VPNs), virtualization, and cloud platforms., • Familiarity with RMM tools and PSA platforms is a plus.Soft Skills:, • Strong problem-solving skillsability to diagnose issues under pressure., • Excellent communication skills for interacting with clients and team members., • Self-motivated with the ability to manage multiple priorities.Education/Certifications:, • Bachelors degree in Computer Science, IT, or related field (or equivalent experience)., • Hybrid role based in Rochester, NY, with flexibility for remote work (onsite client visits required)., • Must be willing to:, • Participate in occasional after-hours upgrades or emergency support., • Work with a variety of technologies and industriesno two days are the same!, • Collaborative team with opportunities for growth and certifications. This is not a software development role. Hands-on troubleshooting and customer interaction are core to this position. Flexible work from home options available.

Job DescriptionGreetings from Donato Technologies Inc. We have an immediate opening with my client. If you are looking for a new project, please send me a copy of your updated resumes Description Position: Transmission Line Engineer Location: Rochester, NY Metropolitan Area (Hybrid) Experience: 35+ years in power system civil engineering Salary Range: $85,000 $125,000 About the Role: A leading international engineering and consulting firm is seeking a Transmission Line Engineer to join its growing operations in the Northeast U.S. power transmission and distribution sector. The firm provides engineering solutions for industries such as power, petrochemical, manufacturing, research facilities, and astronomy. This role offers a hybrid work environment, professional growth, and exposure to large-scale infrastructure projects. Key Responsibilities: • Design and manage transmission line projects from planning through implementation., • Perform conductor selection, structure recommendations, insulation studies, A/C interference analysis, static wire and grounding studies., • Develop detailed line designs including plans, profiles, cross-section details, and estimates., • Incorporate LiDAR and aerial survey data, as well as environmental considerations (wetlands, vernal pools, and sensitive areas) in design and routing., • Lead and oversee overall transmission line design for all capital projects., • Review and create transmission line plans and profile drawings using PLSCAD to comply with standards such as AVANGRID TM and NESC., • Plan and strategize line routing considering right-of-way, congestion, local permitting issues, and reliability optimization., • Conduct probability modeling, cost estimation, and other required technical analyses., • Collaborate with multidisciplinary teams to ensure project success and regulatory compliance. Qualifications & Requirements: • Bachelors degree in Engineering or Engineering Technology (Civil, Electrical, or related discipline)., • 35 years (or more) of experience in power system civil engineering, preferably with transmission lines., • Professional Engineer (PE) license preferred., • Strong knowledge of line design, routing strategies, and transmission standards., • Proficiency with engineering design software such as PLSCAD., • Ability to analyze environmental and structural constraints and incorporate them into project plans. What the Company Offers: • Competitive compensation with performance-based incentives., • Comprehensive benefits including health, dental, vision, life insurance, short- and long-term disability, HSA contributions, 401(k) with company match, PTO, and paid holidays., • Opportunities for career growth and professional development, including tuition reimbursement and job-related training programs., • Supportive work environment with exposure to complex, high-profile infrastructure projects. Ideal Candidate Profile: The ideal candidate is a highly motivated engineer with strong analytical and technical skills, experience in transmission line design, and the ability to manage projects from concept through execution. They are detail-oriented, collaborative, and capable of integrating environmental, structural, and regulatory considerations into practical, cost-effective engineering solutions. Jennifer Sampson Technical Recruiter ....................................................... DONATO TECHNOLOGIES, INC 12100 Ford Rd, #306, Dallas, TX 75234 Direct : (469)-342-0401 Email: Web:

Normal 0 false false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Title Quality Engineer Department Quality Reports to Director, Quality & Product Assurance SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, an

Certification(s) preferred: AWS Certified Solutions Architect, AWS Data Engineer, Google Professional Cloud Architect, Oracle Cloud Infrastructure OCI, GCP Data Engineer Microsoft Certified: Azure Solutions Architect Expert, Azure Data Engineer Associate, Snowflake Core, Snowflake Databricks Data En

Bachelor's Degree in Management Information Systems, Computer and Information Science, Systems Engineering, Electrical Engineering, Chemical Engineering, Industrial Engineering, Mathematics, Statistics, or Mathematical Statistics. AWS Certified Solutions Architect, AWS Data Engineer, Google Professi

Verkada is a leader in cloud-based B2B physical security.Verkada offers six product lines - video security cameras, access control, environmental sensors, alarms, workplace and intercoms - integrated with a single cloud-based software platform.Designed with simplicity and scalability in mind, Verkad

Job Description Insero Talent Solutions is recruiting a Senior Quality/Industrial Engineer for an electronics manufacturing company in Rochester, NY. GENERAL RESPONSIBILITIES: Responsible for documentation control and with analyzing, designing, and improving processes and systems to enhance efficiency and quality in electronics manufacturing operations. This role will also be responsible for manufacturing support and quality initiatives, including creating and maintaining product and component data within the SAP System, and change control for both production and R&D. SPECIFIC RESPONSIBILITIES: Responsible for site management of SAP master data such as the generation of part numbers, BOMs, and routings. • Collaborate with engineering, manufacturing, and supply chain personnel to implement product changes for current and next generation products. Maintain documents at various product stages ranging from the creation of part numbers to the release for manufacturing., • Lead quality assurance initiatives to ensure compliance with industry standards and regulations., • Develop and maintain documentation of processes, standard operating procedures (SOPs), engineering/manufacturing changes and training materials in accordance with ISO 9001:2015 and industry standards., • Review and coordinate with Engineering, Sales, and Safety Agencies on product manuals and labeling, • Bachelor’s degree in Industrial Engineering, Quality Engineering, Manufacturing Engineering, or a related field., • Relevant certifications (e.g., Six Sigma, ASQ Certified Quality Engineer) would be beneficial., • Strong knowledge of general manufacturing, quality control, and lean principles., • Skilled in MS Word and Excel; experience with SAP preferred., • Must be detail oriented and organized in reviewing information, identifying issues, evaluating options and proposing solutions., • Effective written and verbal communication.

Job DescriptionJob Overview: At our company, we design and deliver systems that keep military forces and mission partners around the world. We are looking for a Digital Design Electrical Engineer who is excited to take on challenging design problems and help shape the next generation of software-defined radios and tactical communications systems. Key Responsibilities: • Lead the design and development of advanced digital hardware — from concept through production., • Work alongside experts in FPGA, DSP, RF, and embedded systems. Youll gain exposure to the latest high-speed digital interfaces, power-efficient designs, and mission-critical systems integration.Qualifications:, • Bachelors Degree., • Experience in emerging digital design trends (including new parts, manufacturers, capabilities, analysis)., • Experience with high-speed digital communications protocols (USB, Gb Ethernet, PCIeXpress, etc.)., • 6 years of prior relevant experience., • Analysis of electrical requirements to determine feasibility of design within time and cost constraints., • Extensive hands-on experience with test equipment including oscilloscopes, spectrum analyzers, network analyzers, signal generators etc. to establish operating data, conducts experimental tests and evaluate results., • Proficient in the use of high-level programming languages to configure programmable logic devices, control electrical circuits, and to increase job efficiency., • Perform integration with other subsystems including RF, FPGA, DSP, embedded firmware, test equipment, etc., • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionHere at GoNetspeed, we believe in the power of connectivity. We believe that life doesn’t wait for us to catch up. We believe that providing the fastest and most reliable Internet to the communities we serve means committing to the present and building for the future. And we believe that our amazing team of employees are the key to our future and vision of connecting communities for today and for whatever comes next. If this excites you, come and join our team. GoNetspeed is looking for a senior network engineer to join our team. This individual should enjoy working multiple projects in a fast paced, team centric environment. Essential Functions:Responsible for the installation, layout, and maintenance of all network gear.Plan, design, analyze, and provide technical support for GoNetspeed's fiber-based network.Conduct research and evaluation of new network technology and recommend purchases of network equipment.Responsible for Windows and Linux based back office systems.Participate in an on-call rotation with other engineers.Assist provisioning and technical support as needed. Required Skills:Successful candidates should possess in-depth working knowledge of Nokia and Cisco network equipment.In-depth knowledge in routing (BGP, OSPF, ISIS), switching, and PON related configurations.Intermediate knowledge in fiber termination specifications.In-depth knowledge of DWDM systems.In-depth knowledge in Unix based scripting and systems management.Excellent project management skills, written skills, and communications skills.Firm understanding of PON networks.Intermediate knowledge of outside plant equipment and terminology.Intermediate knowledge of Carrier Grade NAT.Intermediate knowledge of the building of facilities. Power, space, HVAC, cabling, etc.In-depth knowledge of carrier grade IPAM/DHCP solutions.The ability to learn new technologies quickly.Ability to perform independent system analysis, design, and plan implementation.Attention to detail a must. Education:BS in Information Technology or equivalent education required.5+ years' experience building data networks with at least 2 years in systems engineering. GoNetspeed is an equal opportunity employer and does not discriminate on the basis of age, sex, gender identity, color, race, creed, national origin, religious persuasion, marital status, political belief, or disability. Benefits: 401(k)401(k) matchingDental insuranceEmployee assistance programEmployee discountFlexible spending accountHealth insuranceHealth savings accountLife insurancePaid time offReferral programVision insurance GoNetspeed is an equal opportunity employer and does not discriminate on the basis of age, sex, gender identity, color, race, creed, national origin, religious persuasion, marital status, political belief, or disability. Thank you for choosing GoNetspeed as your potential next employer! We know you have other options when selecting an employer of choice and are so glad you chose to apply with us.

Job DescriptionDescription: General Job Summary: Responsible for launching new product such as stand-alone sheet metal components and up to complex electro-mechanical assemblies from documentation control/management through shipping. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Responsible for selecting processes and assisting with cost estimates for new products and tools., • Responsible for Floor Engineering Tech support for his or her part portfolio or customer base., • Effectively utilize Lean Principles when engineering the manufacturing processes., • Develops and documents machine processes and manual processes appropriate for the materials used to manufacture new and existing Customer products., • Aware of new and existing products based upon the ‘total production cost’ during the product launch and through life of the product., • Serves as technical expert for the Proview Team (Prototype), • Serves as technical expert for the NORP (New Order Review Process) Team for launching new product into Production., • Will assist Technical Sales Engineer for specific programs., • Responsible for assisting and reviewing complex cost estimates., • Responsible for product quality and process safety. Interfaces with Quality to determine effective Quality Plans and if necessary implement NCMR root cause and corrective action closure., • Manages Continuous Improvement Projects., • May be asked to mentor other Manufacturing and Tool Design Engineers and oversee cross-functional project teams ensuring cost and price profitability to drive cost up front. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.S.) Bachelor’s degree (B.S.) preferred Industrial/Manufacturing or Mechanical Engineering Or equivalent combination of education and experience. Experience 5-10 years related experience or training Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Word, Microsoft Excel, Microsoft Powerpoint, Microsoft Project, Internet Explorer, Auto-CAD, strong 3D modeling (SolidWorks) Other Requirements: Familiar with the sheet-metal industry, including fabrication and hard tooling for stamping, forming and welding of steel, stainless, aluminum as well as other metals. Familiar with DFM/DFA principals to reduce costs. Strong GD&T skill set. Familiar with assembly techniques. Tool-making or tool-engineering experience a plus. Ability to present a positive ownership attitude towards work responsibilities. Mental and visual attention with concentration on detail. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; talk or hear, lift and/or move up to 35 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the employee is regularly exposed to wet and/or humid conditions; extreme heat; and extreme cold. While performing the duties of this job the noise level in the work environment is usually loud.