Trabajos electrical engineering technology en White Plains, New YorkCrear alertas

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • CCure 900 Certification, • Door Hardware troubleshooting, • Software House Controllers, • Schlage wireless locks, • Automatic doors openers, • Video, • Victor/Video Edge Certification, • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Axis IP Camera, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • CCure 900 Certification, • Door Hardware troubleshooting, • Software House Controllers, • Schlage wireless locks, • Automatic doors openers, • Video, • Victor/Video Edge Certification, • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Axis IP Camera, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • CCure 900 Certification, • Door Hardware troubleshooting, • Software House Controllers, • Schlage wireless locks, • Automatic doors openers, • Video, • Victor/Video Edge Certification, • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Axis IP Camera, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • CCure 900 Certification, • Door Hardware troubleshooting, • Software House Controllers, • Schlage wireless locks, • Automatic doors openers, • Video, • Victor/Video Edge Certification, • Camera Troubleshooting, • Media Converter Fiber/IP Technology, • Axis IP Camera, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description JOB TITLE: Manufacturing Technician LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $22.00/hr - $32.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar™ by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Manufacturing Technician will play a key role in supporting the production and assembly of our advanced electro-mechanical device, SectionStar™, as part of a close-knit manufacturing team. This role is hands-on, requiring expertise in assembling, testing, and troubleshooting components and systems to meet quality and performance standards. The ideal candidate would have experience working in a fast-paced production environment, preferably with medical devices, and a strong understanding of manufacturing processes and tools. We are looking for a detail-oriented team player who values precision and views medical device development as a competitive advantage. Responsibilities: • Assemble, calibrate, and test electro-mechanical subsystems according to established procedures and specifications, • Troubleshoot and repair mechanical, electrical, and electronic components to ensure functionality and performance, • Conduct quality checks at various stages of production to ensure adherence to quality standards and specifications, • Follow all production activities in compliance with regulatory requirements (ex: ISO 13485, FDA), • Maintain and troubleshoot manufacturing equipment to ensure optimal performance and minimal downtime, • Collaborate with engineering and quality teams to implement process improvements and resolve production issues, • Minimum HS Diploma / GED or equivalent experience, • 1-3 years of manufacturing experience, preferably in medical device, electro-mechanical, optical, or automotive industries, • Strong attention to detail, organizational skills, and self-discipline to maintain compliance and quality standards, • Ability to read, interpret, and follow work instructions, specifications, and engineering drawings, • Strong interpersonal, verbal, and written communication skills, • Ability to work both independently and collaboratively in a team-oriented environment, • Flexibility to adapt to a fast-paced and evolving environment and assist others as needed, • Basic computer skills with proficiency in standard business software (ex: Microsoft Office) and a willingness to learn new technologies, • Mechanically inclined, with a curiosity to learn and a drive to meet aggressive milestones and deadlines, • Familiarity with ISO 13485 and experience developing tooling to improve processes a plus, • Familiarity with continuous improvement principles and experience supporting process enhancements a plus, • Competitive salary, commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays), • Overtime opportunities available for those interested in additional hours, • A collaborative and diverse work environment where our teams thrive on solving complex challenges

Job DescriptionSenior Electrical Engineer - Critical Facilities - White Plains, NY (hybrid /remote) Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Position Overview: The Hudson Clean Heat Applications Engineer will be responsible for the design, coordination, and implementation of mechanical, electrical, and plumbing systems for commercial, industrial, and institutional projects utilizing the latest in water source heat pump technology and any other non-carbon based heating and cooling technology. This role requires applied engineering experience in MEP disciplines and collaboration with multidisciplinary teams to ensure effective project delivery. The engineer will support the Sales Team in design development, construction documentation, and the Project Management team in the project execution, ensuring compliance with applicable codes, standards, and project specifications while meeting the project timelines and cost targets. Key Responsibilities: • Design & Engineering Development, • Prepare detailed design layouts, calculations, and specifications for heat pump, electrical, and plumbing systems., • Perform equipment selection and sizing, load calculations, and energy analysis., • Review and apply relevant building codes, standards (ASHRAE, NFPA, NEC, IPC), and regulatory requirements., • Develop schematic designs and support design development and construction documents., • Project Coordination, • Collaborate with the Sales Team on the pre-sale engineering characteristics of projects., • Collaborate with architects, structural engineers, contractors, and other disciplines to ensure integrated design solutions., • Coordinate MEP systems across project teams to resolve conflicts and design issues., • Support the project manager in preparing design packages for client review and approval., • Participate in project meetings and communicate engineering concepts to both technical and non-technical stakeholders., • Construction & Implementation Support, • Review submittals, shop drawings, and Requests for Information (RFIs) during the construction phase., • Together with the Project Manager, conduct site visits and inspections to monitor compliance with design intent and installation quality., • Assist in commissioning support and functional performance testing of MEP systems., • Technical Documentation & Reporting, • Prepare engineering reports, technical specifications, basis of design documents, and other project deliverables., • Maintain accurate documentation throughout the project lifecycle, including design revisions and field observations., • Participate in value engineering exercises and support lifecycle cost analysis., • Compliance & Safety, • Ensure that all designs comply with environmental, health, and safety regulations., • Incorporate sustainable design principles and energy efficiency best practices where applicable., • Continuous Improvement & Professional Development, • Stay current with technological advancements, industry best practices, and code changes in MEP disciplines., • Bachelor’s degree in mechanical, Electrical, or Architectural Engineering, or related field., • Approximately 3-5 years of experience in MEP design and engineering., • Proficiency in design software (AutoCAD MEP, Revit, and/or similar BIM tools)., • Familiarity with energy modeling software and calculation tools is preferred., • Strong understanding of construction processes and building systems integration., • Effective communication and coordination skills. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining Miller Proctor Nickolas, Inc, you're more than an employee, you're an Employee Owner.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining Miller Proctor Nickolas, Inc, you're more than an employee, you're an Employee Owner.

Job Description JOB TITLE: Junior Electrical Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $70,000 – $95,000/yr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar™ by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Junior Electrical Engineer will be working alongside our existing electrical engineers, mechanical engineers and software engineers on medical device development. This role is multi-disciplinary with technical responsibility for our device electrical system, PCBs and wiring diagrams, providing continuous feedback on the development process and accepting feedback as well. It is also expected that some software development for the device will be performed by the Junior Electrical Engineer. The ideal candidate will have a deep understanding of hardware electrical design and exposure to software development for hardware. We are looking for a team player who views medical device development as a competitive advantage. Responsibilities: • Designing system level schematics, electrical isolation strategy, as well as detailed PCB schematics and layout, • Designing precision motion stages and components, electromechanical system parts and assemblies in a CAD environment, • Developing low-level device control software in C++ with guidance, • Documentation, including schematics, wire harness drawings, PCB files, and component specifications for FDA processes, • Modeling and developing electrical systems throughout the device, such as, stepper and DC motor control, AC power systems, low voltage data, and high sensitivity analog and digital signals, • Designing and prototyping analog and digital circuits, primarily for integration of sensors, • Building cable harnesses, designing signal and power distribution networks, • Building prototypes and test fixtures including instrumenting with data acquisition systems and programming, • Bachelor's degree or Master’s Degree in Electrical Engineering or a related field., • 2+ years of experience working in the field of electrical engineering, • Exposure to software/firmware programming in C++, • Competency in designing large electromechanical system components, • Proven design record, • Analytical problem solution skills, such as modeling and simulations, • Design of high sensitivity analog and data systems, • Design of power conditioning due to motors and high inrush current components, • Design experience with embedded hardware such as Microcontrollers and FPGAs, • Knowledge of IEC safety and EMC standards and experience in working with regulated test labs, • Involvement in automation-related extracurricular activities, such as, First Robotics, • Lab bench experience including, soldering, wiring, troubleshooting, and using lab equipment to explain results, • Experience in working with Linux systems and micro processors, • Familiar with PCB design tools. Altium Preferred, • Strong interpersonal, verbal, and written communication skills, • Time management skills to prioritize and meet deadlines, • Ability to work independently and as a member of a team, • Flexibility to work in a changing and fast paced environment, • Drive, determination and ability to hit aggressive milestones/deadlines, • Competitive salary, commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays), • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world

Job Description Fire Protection and Plumbing Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Candidate will work with customers to gather design requirements for plumbing and fire protection design projects supporting various mission critical / data center centric projects. Will translate requirements to internal design team, while providing updates to customer. Responsibilities: • Design Plumbing and Fire protection systems in mission critical facilities - trade floors, labs, control rooms, data centers, etc., • Fire and plumbing engineering and design of systems cold and hot water systems, non-potable water systems, water treatment, sanitary drainage and vent systems, storm drainage systems, all types of pumping systems, natural gas distribution systems, special plumbing systems; fire suppression systems; sprinkler piping design, including hydraulic calculations; Incipient fire detection systems, • Work on multiple projects simultaneously, • Coordinate with other internal engineering disciplines to achieve successful, functional and innovative designs for our clients, • Interact with other building disciplines (architectural, structural, electrical, mechanical, civil, controls, etc.) to ensure compatibility with the design intent, • Select equipment for use in building systems and write reports, • Provide specifications for all fire protection and plumbing materials and equipment, • Go to client site as needed for project meetings/site observations, • Perform field surveys at customer sites to document existing conditions and/or observation of construction activities, • Participate in client project requirement meetings and value analysis and basic cost estimating, • Conduct QA /QC / quality assurance and quality control on project, • Perform and oversee the performance of load calculations and system design using company standard software, and proprietary manufacturer software, • Develop Plumbing and Fire Protection Drawings, • Design and document Plumbing and Fire Protection systems, • Assist in the continued development and updating of standards and specifications for the plumbing and fire protection, • Familiarity with renovation and new work projects; appropriate codes, standards and industry best practices, • Prepare Contract Documents using Revit and AutoCAD, • Bachelor's degree in Mechanical / Fire Protection / Plumbing engineering degree required, • Previous experience at an engineering consulting MEP firm a big plus, • PE; Professional Engineer a big plus, • Mission Critical Facilities Experience a huge plus!, • 5+ years' experience or more of plumbing design and fire protection systems, • Strong technical knowledge in fire protection and plumbing, • Excellent organization and planning skills, • A sound knowledge of engineering fundamentals, • Highly motivated, proactive and willing to take on new challenges, • Strong computer skills and skilled in software typically used in plumbing / fire protection design (i.e. hydraulic calculations, etc.), • Strong working knowledge of building, plumbing and fire codes, • Strong communication skills! Excellent written and verbal!, • Revit Experience is a must, • Ability to interface with clients After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description JOB TITLE: Senior Computer Vision Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $170,000 – $200,000/yr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar™ by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Senior Computer Vision Engineer will play a critical role in the design, development, and implementation of cutting-edge machine vision solutions for SectionStar™ , a mechatronic device. This role is multi-disciplinary with responsibility for solving complex problems related to automated inspection, robotics, and computer vision. The ideal candidate will have a proven track record of contributing to innovation in areas like manufacturing automation, quality control, and advanced imaging systems. We are looking for a team player who views medical device development as a competitive advantage. Responsibilities: • Design and develop machine vision algorithms for object detection, segmentation, classification, tracking, and inspection, • Work closely with hardware, software, and robotics teams to integrate machine vision systems into broader automation frameworks, • Lead the planning, execution, and delivery of machine vision projects, ensuring alignment with organizational goals and timelines, • Improve the performance of machine vision systems by refining algorithms for accuracy, speed, and efficiency, • Create prototypes, run simulations, and conduct unit and system testing to validate performance of machine vision solutions in real-world environments, • Analyze imaging data to improve system performance and to train machine learning models for improved accuracy and automation, • Provide guidance and technical mentorship to junior engineers and team members, • Master’s Degree or Ph.D. in Computer Science, Electrical Engineering, or a related field, • 5+ years of experience in classical image processing, • Prior experience performing hardware optimization of code across both CPU and GPU architectures for improved performance and efficiency, • Proven track record of delivering successful computer vision projects from concept to implementation, • Strong programming skills in both low-level (C++) and high-level languages (Python, MATLAB) with the ability to process large-scale image datasets using Linux/Bash, • Expertise in machine vision libraries, such as OpenCV, • Experience with image processing techniques, pattern recognition, and feature extraction, • Proficiency with camera technologies, lighting techniques, optics, and sensor integration, • Strong analytical and problem-solving skills, • Excellent communication and collaboration skills, • Ability to lead and work within cross-functional teams, • Attention to detail and a commitment to delivering high-quality results, • Familiarity with deep learning / neural networks, a plus, • Experience in industrial automations, or robotics, a plus, • Prior experience working with hardware-software integration for vision systems a plus, • Familiarity with real-time image processing and optimization for embedded systems, a plus, • Expertise in Digital Pathology and Machine Vision for the automation of medical diagnostic processes, a plus, • Competitive salary, commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays), • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world

Job Description HVAC Controls Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5-10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job Description Our Client A fast moving and venture backed advertising technology startup based in San Francisco. They have raised twelve million dollars in funding and are transforming how business to business marketers reach their ideal customers. Their identity resolution technology blends business and consumer signals to convert static audience lists into high match and cross channel segments without the use of cookies. By transforming first party and third party data into precision targetable audiences across platforms such as Meta, Google and YouTube, they enable marketing teams to reach higher match rates, reduce wasted advertising spend and accelerate pipeline growth. With a strong understanding of how business buyers behave in channels that have traditionally been focused on business to consumer activity, they are redefining how business brands scale demand generation and account based efforts. About Us Catalyst Labs is a leading talent agency with a specialized vertical in Applied AI, Machine Learning, and Data Science. We stand out as an agency thats deeply embedded in our clients recruitment operations. We collaborate directly with Founders, CTOs, and Heads of AI in those themes who are driving the next wave of applied intelligence from model optimization to productized AI workflows. We take pride in facilitating conversations that align with your technical expertise, creative problem-solving mindset, and long-term growth trajectory in the evolving world of intelligent systems. Location: San Francisco Work type: Full Time, Compensation: above market base + bonus + equity Roles & Responsibilities * Lead the design, development and scaling of an end to end data platform from ingestion to insights, ensuring that data is fast, reliable and ready for business use. * Build and maintain scalable batch and streaming pipelines, transforming diverse data sources and third party application programming interfaces into trusted and low latency systems. * Take full ownership of reliability, cost and service level objectives. This includes achieving ninety nine point nine percent uptime, maintaining minutes level latency and optimizing cost per terabyte. Conduct root cause analysis and provide long lasting solutions. * Operate inference pipelines that enhance and enrich data. This includes enrichment, scoring and quality assurance using large language models and retrieval augmented generation. Manage version control, caching and evaluation loops. * Work across teams to deliver data as a product through the creation of clear data contracts, ownership models, lifecycle processes and usage based decision making. * Guide architectural decisions across the data lake and the entire pipeline stack. Document lineage, trade offs and reversibility while making practical decisions on whether to build internally or buy externally. * Scale integration with application programming interfaces and internal services while ensuring data consistency, high data quality and support for both real time and batch oriented use cases. * Mentor engineers, review code and raise the overall technical standard across teams. Promote data driven best practices throughout the organization. Qualifications * Bachelors or Masters degree in Computer Science, Computer Engineering, Electrical Engineering, or Mathematics. * Excellent written and verbal communication; proactive and collaborative mindset. * Comfortable in hybrid or distributed environments with strong ownership and accountability. * A founder-level bias for actionable to identify bottlenecks, automate workflows, and iterate rapidly based on measurable outcomes. * Demonstrated ability to teach, mentor, and document technical decisions and schemas clearly. Core Experience * 6 to 12 years of experience building and scaling production-grade data systems, with deep expertise in data architecture, modeling, and pipeline design. * Expert SQL (query optimization on large datasets) and Python skills. * Hands-on experience with distributed data technologies (Spark, Flink, Kafka) and modern orchestration tools (Airflow, Dagster, Prefect). * Familiarity with dbt, DuckDB, and the modern data stack; experience with IaC, CI/CD, and observability. * Exposure to Kubernetes and cloud infrastructure (AWS, GCP, or Azure). * Bonus: Strong Node.js skills for faster onboarding and system integration. * Previous experience at a high-growth startup (10 to 200 people) or early-stage environment with a strong product mindset.

Westchester Community College seeks Adjunct Faculty members in the Engineering Department to teach classes in Civil, Mechanical, and/or Electrical Technology. Location: Valhalla, NY Category: Adjunct Positions - Teaching Faculty Posted On: Wed Nov 12 2025 Job Description:.