Facility jobs in Houston, Texas - Page 13Crear alertas

Job DescriptionSalary: The Coating Inspectors shall possess knowledge and skills relating to the application of protective coatings to pipelines, fabricated piping, and storage tanks. The inspector should be familiar with and have experience in applying protective coatings, operating lest equipment, monitoring the application of the coatings, and enforcing company, industry and manufacturers specifications. The inspector must be familiar with safety standards applicable to coating applications as set forth in OSHA Construction Industry Standards. Primary Functions: • Performs assigned routine tests on materials, services in process, or finished projects where results are compared with company quality standards. Reports results to supervisor who will make an analysis and take necessary action., • Inspects visually for obvious defects., • Performs detailed visual inspection when necessary to determine quality of prodcut/service where limits are not clearly defined. Identifies defective work and helps put corrective actions in place., • Records results on inspection forms or charts and reports number of defects found. Posts and maintains forms and charts of inspection data, quality levels, or special quality studies., • May act as quality control department clerk, maintaining all quality records for facility., • Verifies that all materials used in the performance of the job assignment are in compliance with Client Company requirements., • Cooperates and works closely with the Repair/Cut-Out Welding Inspector, NDT and Contractor's Representative to assure that no repairs or cutouts are coated and lowered-in., • Assures that all specifications and safety standards are adhered to., • Records and reports material usage and waste. Qualifications: • Minimum of two years of experience inthe application or inspection of coating in the petroleum or chemical industries, or, • One year experience in the application or inspection of coating and either NACE CIP level 1 certification or SSPC PC1 level 1 certification. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visitAPI | API 1169 - Pipeline Construction Inspectorfor more information. For more information about EnSiteUSA, please visit:

Job Description Position Summary The MRO Procurement Buyer is responsible for overseeing the sourcing, procurement, and management of all Maintenance, Repair, and Operations (MRO) supplies and services required to support large-scale construction, renovation, and facility management projects. This includes building materials, equipment, tools, safety supplies, and service contracts. The role ensures timely and cost-effective procurement while maintaining compliance with construction codes, environmental standards, and safety regulations. Key Responsibilities Strategic Procurement & Vendor Management • Develop and execute procurement strategies for construction and facility renovation projects, including building materials, heavy equipment, tools, spare parts, utilities, and services., • Identify, qualify, and manage vendors and subcontractors to ensure quality, reliability, and compliance with project specifications., • Negotiate contracts, service agreements, and pricing with construction suppliers and service providers., • Ensure uninterrupted availability of MRO materials and services for construction schedules and facility build-outs., • Work closely with project managers, engineers, and site supervisors to forecast material needs, review construction schedules, and align procurement timelines., • Evaluate supplier lead times and capacity to meet aggressive construction deadlines., • Implement cost-control strategies to optimize spend on construction-related MRO categories., • Monitor budgets, track variances, and report savings opportunities., • Ensure compliance with local building codes, safety regulations, and environmental standards., • Standardize procurement processes for construction and facilities projects, including requisition-to-pay workflows., • Support ERP/MRP and construction management software integration for procurement functions., • Partner with Facilities, Engineering, and Project Management teams to align procurement strategies with renovation timelines., • Lead, mentor, and develop procurement staff supporting construction and facilities operations., • Bachelor’s degree in Supply Chain, Construction Management, Engineering, or related field., • 3+ years of procurement experience., • Strong knowledge of construction materials, MRO supplies, facility systems (HVAC, electrical, plumbing), and contractor services., • Proven negotiation and contract management expertise., • Experience with construction schedules and ability to identify excessive float/buffers and propose accelerated solutions., • Familiarity with ERP systems (e.g., SAP, Oracle) and construction management tools (Procore, Primavera, MS Project)., • Deep understanding of construction procurement and facility operations., • Ability to analyze project schedules and align procurement accordingly., • Strong communication, negotiation, and relationship-building skills., • Hands-on, detail-oriented, and able to operate in fast-paced construction environments. ZKsogLYznU

Job DescriptionServerfarm is a leading developer and operator of data centers with over 750+ locations and key customer relationships in 45 countries. We're revolutionizing how data centers operate across North America, Western Europe, and Israel, serving the world's leading technology and hyperscale companies. With Manulife Investment Management's acquisition in 2023 and our award-winning InCommand platform we're positioned for explosive growth as AI adoption and cloud migration drive unprecedented demand for data center capacity. A career at Serverfarm means being at the forefront of digital infrastructure innovation, where your work directly impacts how the world's data is managed and secured. As we target 4x growth over the next four years, you'll have unprecedented opportunities to take on new challenges, develop cutting-edge skills, and grow your career across our expanding global operations. Join our team of innovators and help shape the future of sustainable data centers while building a career without boundaries.Key Accountabilities • Ensure that all MEP plant and distribution infrastructure is operated and maintained in a safe manner, to best industry practice and within manufacturers recommendations., • Monitor power and environmental conditions within all critical spaces within the facility., • Perform assigned maintenance tasks in accordance with SF practices utilizing the internal CMMS., • Assist with planning and scheduling corrective maintenance activities, • Escort and support outside contractors, ensuring they are abiding SF work rules and processes, • Respond to site incidents, execute appropriate MOP/EOP documentation to resolve and/or mitigate issues and communicate to manage throughout event., • Support and follow all SF Change Control policies and procedures., • Perform site rounds and report any issues found to site management., • Participate in construction and commissioning activities as directed by site management, • Adhere to all local, state and federal safety laws and requirements, • Complete other duties as assigned by the management team, • Participate in and support MOP/SOP/EOP documentation process for site., • Participate in and support the development of site policies and standards, • Work with site team members to deliver 100% uptime of critical infrastructure Required Skills, • Experience working in a Data Center with proven success in delivering customer requirements in a critical technology environment, • Evidence of self-management and alignment with ever-changing priorities

Job DescriptionAbout City Wide of Greater Houston At City Wide of Greater Houston, we’re not just another commercial cleaning company — we’re the premier facility services management partner for businesses throughout the Greater Houston area. We coordinate and manage over 20 different building maintenance solutions for commercial properties, from janitorial and floor care to landscaping, HVAC, and more. Our mission is straightforward: to simplify building maintenance for our clients through proactive management, reliable service, and trusted partnerships. We are seeking a driven and dynamic Commercial Business Sales Executive to help expand our presence in the Houston market by fostering strong client relationships and generating new business opportunities. Position Overview The Commercial Business Sales Executive is responsible for developing new business relationships with decision-makers in commercial, industrial, educational, and healthcare facilities. You’ll identify prospects, present tailored maintenance solutions, and work closely with our operations and client success teams to deliver on promises and exceed expectations. This role is ideal for a motivated sales professional who thrives on building relationships, understanding client needs, and closing deals in a fast-paced, service-oriented environment. Key Responsibilities * Identify, target, and develop new commercial accounts through strategic prospecting, networking, and cold calling. * Build and maintain a robust sales pipeline of qualified prospects across multiple industries. * Conduct site visits, facility walkthroughs, and needs assessments to understand client requirements. * Present customized facility service solutions that align with client goals and budgets. * Negotiate contracts and close sales opportunities that meet or exceed assigned quotas. * Collaborate with internal operations and account management teams to ensure seamless service transitions and long-term client satisfaction. * Maintain accurate records of sales activities, opportunities, and client communications in CRM. * Represent City Wide of Greater Houston professionally at networking events, trade shows, and community engagements. * Stay informed about local market trends, competitors, and emerging opportunities in facility management. Qualifications Required: * 3+ years of B2B sales experience, preferably in facilities management, commercial cleaning, building services, or related industries. * Proven track record of meeting or exceeding sales targets. * Strong communication, presentation, and negotiation skills. * Ability to identify opportunities, manage long sales cycles, and build relationships with executive decision-makers. * Self-motivated and organized, with strong time management skills. * Proficiency in Microsoft Office Suite and CRM tools (Salesforce, HubSpot, etc.). * Valid driver’s license and reliable transportation (local travel required). Preferred: * Bachelor’s degree in Business, Marketing, or related field. * Experience selling services to property managers, facility managers, or building owners. * Familiarity with RFP processes and contract negotiations. Personal Attributes * Competitive, goal-oriented, and highly self-driven. * Professional communicator with excellent interpersonal skills. * Skilled listener who understands client pain points and offers practical solutions. * Positive attitude and collaborative mindset. * Strong integrity and commitment to delivering on promises. Compensation & Benefits * Competitive base salary plus uncapped commissions. * Vehicle allowance. * Health, dental, and vision insurance. * Paid time off and holidays. * Ongoing training and professional development. * Opportunity for career growth within a rapidly expanding company. Why Join City Wide of Greater Houston? When you join City Wide, you join a nationally recognized leader in facility services management — backed by decades of proven success and a powerful local team. You’ll have the tools, support, and autonomy to build a successful sales career while helping clients simplify their building maintenance challenges. How to Apply If you’re an ambitious, relationship-driven professional ready to make an impact in the Houston market, we want to hear from you! 👉 Apply today by submitting your resume and a brief cover letter explaining why you’d be a great fit for the Commercial Business Sales Executive role at City Wide of Greater Houston. Powered by JazzHR DPKg8oEnjV

Job DescriptionPurpose of the position The Quality Engineer is a professional who understands the principles of product and service quality evaluation and control. This body of knowledge and applied technologies include, but are not limited to, development and operation of quality control systems, application and analysis of testing and inspection procedures, the ability to use statistical methods to diagnose and correct improper quality control practices, an understanding of human factors and motivation, facility with quality cost concepts and techniques, and the knowledge and ability to develop and administer management information systems and to audit quality systems for deficiency identification and correction. This position will be responsible for the implementation, use, compliance and maintenance of quality systems and tools including the Quality Management System. Duties and Responsibilities： • Define the quality control plan and audit the implement status of quality control plan, • Works with cross-functional teams to prioritize key site projects and determine appropriate resources and timing; integrate activities using quality principles such as lean Six Sigma with Quality Management System activities such as Corrective and Preventive Action (CAPA) and Quality Improvements to assure effectiveness and compliance to customer and regulatory requirements., • Evaluates performance of current operational Quality and Quality Engineering methods (e.g., failure investigation, measurement systems analysis, process development, etc.) and drives best practices throughout the business and transfers that knowledge across the business, as appropriate., • Reports significant issues or developments identified during Quality activities and provides recommended process improvements to management., • Becomes proficient in the various business systems used at First Quality, including MES, quality data collection systems and understands how the systems are integrated with each other and within the businessEducation and work experience, • Bachelor’s degree in Engineering discipline or a technical field with 2 years of quality or manufacturing experience required., • Three or more years in quality or manufacturing engineering strongly preferred., • Highly qualified candidates would have an advanced degree in Analytics and/or ASQ CQA or CQE certification, and/or Lean or Six Sigma certification, • Experience in technical problem solving, statistical analysis, and quality auditing preferred.Working conditions, • Office-based role, fast-paced work environment, • This position must be able to respond to after-hour emergencies and be available to work non-core hours or overtime to complete various projects without interruption to operations.Skills:, • Having 2 years working experience of process analysis and handling customer complaint SMT area., • Ability to use English as working language to communicate with customer, and proficient in reading, writing and speaking English., • Familiar with applying quality control techniques to analyze and complete PPT report., • Good quality awareness and interpersonal communication skills., • Strong knowledge of MS-Office products and proficiency in Mini Tab dQ6Je39oBF

Job Description Who We Are Worldwide Oilfield Machine (WOM) is a premium flow control and pressure containment systems manufacturer. Our employee-driven company exists to partner with relevant stakeholders in local communities in which we operate, delivering reliable, innovative, cost-efficient, and climate-conscious solutions to our customers’ business needs. We strive to improve the quality of life for the people in our global communities through intentional investments in education, paving the way for future generations. What We Do WOM leverages its four decades-strong design, engineering, and manufacturing expertise with an agile, solutions-driven approach to answer your most challenging equipment needs involving: • Flow Control, • Pressure Containment, • Hydraulic Fracturing, • Subsea Production We are seeking a skilled Mechanical Engineer to join our team in a rubber manufacturing facility specializing in the production of elastomer seals for pressure control systems and Blow Out Preventer (BOP) seals. The ideal candidate will be responsible for mechanical design, technical analysis, and resolution of engineering issues while ensuring compliance with customer and industry standards. This role requires strong collaboration with customers, suppliers, and internal teams such as marketing, sales, and project management. The engineer will also play a key role in product design, testing, and verification. Essential Responsibilities: • Perform detailed mechanical design work, including 3D modeling and simulations (e.g., thermal, stress)., • Create detailed engineering and assembly drawings for manufacturing, ensuring designs meet input specifications., • Conduct technical analysis and resolve engineering issues in alignment with customer and industry requirements., • Collaborate with cross-functional teams, including customers, suppliers, marketing, sales, and project management, to integrate design requirements., • Design new elastomer seals for pressure control and BOP applications and improve existing products for enhanced performance and reliability., • Ensure compliance of designs with customer specifications, API standards, and internal design inputs., • Highlight mechanical technical risks and participate in design reviews, presenting design concepts and solutions., • Oversee testing, verification, and conformance of design outputs to meet design inputs, ensuring performance in R&D and production phases., • Write comprehensive test reports and create design files, including detailed documentation of results, technical reports, and test procedures., • Work closely with operations, manufacturing, and production engineers to ensure designs are manufacturable and cost-effective., • Lead efforts in generating new part numbers, bills of material (BOM), and managing related technical documentation., • Address design change requests promptly and ensure timely progress reporting to management and project teams., • Guide and coordinate the efforts of drafters and technicians involved in the design and development process. Requirements: • Bachelor’s Degree in Mechanical Engineering or related field., • Experience in mechanical design within a sealing technology or elastomer manufacturing environment., • Strong proficiency in CAD software (e.g., AutoCAD, Inventor, SolidWorks) and simulation tools (e.g., FEA)., • Experience with API standards and Oil & Gas sealing requirements is highly desirable., • Familiarity with pressure control equipment, including BOP seals and systems., • Experience with manufacturing processes for rubber or elastomeric components., • Knowledge of technical specifications and mechanical part selection processes., • Knowledge of polymers, elastomers, metals, and alloys used in high-pressure sealing applications is preferred., • Hands-on experience in testing and validation of mechanical components and managing design for manufacturability. WOM employees enjoy a fast-paced environment, where your day-to-day contributions make a real impact to the organization. We enjoy celebrating cultural diversity and success as a team. We provide an excellent compensation and benefits package, including medical/dental/vision insurance, a 401(k) plan with company match, short- and long-term disability, paid holidays, vacation and more.

Job Description Project Engineer Location: Houston, TX – Energy Corridor Duration: Temp to Perm Position Summary: Seeking a highly motivated and detail-oriented Project Engineer to support the planning, execution, and delivery of gas processing projects. Based in Houston’s Energy Corridor, the ideal candidate will have a strong background in engineering or construction management and will play a key role in ensuring projects are completed safely, on time, and within budget. Key Responsibilities: · Assist in the planning, coordination, and execution of gas processing facility projects. · Support project scheduling, budgeting, and resource allocation. · Review engineering designs, specifications, and technical documentation. · Coordinate with cross-functional teams including engineering, procurement, construction, and operations. · Monitor project progress and prepare regular status reports. · Ensure compliance with safety, environmental, and regulatory standards. · Identify and mitigate project risks and issues. · Support procurement activities including vendor selection and material tracking. · Participate in site visits, inspections, and commissioning activities. Qualifications: · Bachelor’s degree in Engineering (Mechanical, Chemical, Civil, or related field) or Construction Management. · 2–5 years of experience in project engineering, preferably in the oil & gas or energy sector. · Knowledge of gas processing technologies and industry standards is a plus. · Proficiency in project management tools (e.g., MS Project, Primavera P6) and engineering software (e.g., AutoCAD, SolidWorks). · Strong analytical, organizational, and communication skills. · Ability to work independently and collaboratively in a fast-paced environment. · Willingness to travel to project sites as needed. Preferred Qualifications: · Professional Engineer (PE) license or working toward licensure. · PMP certification or formal project management training. · Experience with EPC (Engineering, Procurement, and Construction) project delivery. · Familiarity with HAZOP, P&ID reviews, and construction safety practices. Company DescriptionTaylor Technical Services began business in 1977. Since then, we have grown to become one of the largest suppliers of Engineering personnel in the Houston/Gulf Coast area and Alaska. We pride ourselves in having recruiters and account managers that have experience and have worked in the oil & gas engineering industry. Specialties: Cad Drafters, Electrical Designers, Instrument Designers, Structural Designers, Piping Designers, Electrical Engineers, Instrument Engineers, Structural Engineers, Mechanical Engineers, Pipe Stress Engineers, EH&S, QA/QC, Procurement, Project Controls, Document Control, AdministrativeTaylor Technical Services began business in 1977. Since then, we have grown to become one of the largest suppliers of Engineering personnel in the Houston/Gulf Coast area and Alaska. We pride ourselves in having recruiters and account managers that have experience and have worked in the oil & gas engineering industry.\r\n\r\nSpecialties: Cad Drafters, Electrical Designers, Instrument Designers, Structural Designers, Piping Designers, Electrical Engineers, Instrument Engineers, Structural Engineers, Mechanical Engineers, Pipe Stress Engineers, EH&S, QA/QC, Procurement, Project Controls, Document Control, Administrative

Job DescriptionMain Function: • EQUIPMENT SELECTION: The Test Engineer Assistant will be responsible for specifying Machine type, expected throughput, expected yields and the required equipment manning. This will involve close liaison with the customer to understand the customer needs and requirements which may include customer specific Test Equipment and Fixtures., • EQUIPMENT PERFORMANCE: The Test Engineer Assistant will be responsible for ensuring that in a volume manufacturing environment that all manufacturing equipment performs as per supplier's specifications and within the requirements of the quotation. This is to say, that all targets can be met, that machines perform as per forecast and that yields, and quality targets are achieved., • TESTER MAINTENANCE: The Test Engineer Assistant will be responsible for all ongoing equipment maintenance which will include all planned preventative maintenance schedules, line support for breakdowns and major machine overhaul activity. The Test Engineer Assistant will also be responsible for the forecasting, stocking and ordering of spare parts and consumables required for Test Equipment and Fixtures maintenance.Duties and Responsibilities:, • EQUIPMENT SELECTION: When new products are introduced to the facility the Test Engineer Assistant will be responsible for the design of the Test Process, in conjunction with input from the Product Engineer. This will involve specifying the correct types and quantity of Testers and wherever required introducing new technologies for a customer’s specific product., • NEW PRODUCT INTRODUCTION: During the introduction of new products, the Test Engineer Assistant will have start up responsibilities to ensure that Test process operates as designed. This will include proving Throughputs and Yields and also agreeing the Manufacturing Handover process for volume production., • QUALITY: The Test Engineer Assistant will work with the Quality group to establish the Quality plans on a product-by-product basis. During the normal course of production, the Test Engineer Assistant will be required to be involved with the Quality group on an on-going basis for the resolution of Tester/ Software / Process problems that will arise., • TEAMWORK: During all of the manufacturing activities the Test Engineer Assistant will be required to co-operate with all departments within the Facility and will be required to act a pro-active team member, taking a lead role on all Test related issues., • DOCUMENTATION: The Test Engineer Assistant will be responsible for providing all process documentation and Test Programs for production build. This will include ensuring that the Test and Fixture pin out listings that are to be used in manufacturing are accurate to the current build level., • ECN ACTIVITY: The Test Engineer Assistant will be responsible for participating during the Change Control Meetings, where both internal and customer ECN’s will be actioned. Subsequent to that meeting the Test Engineer Assistant will be responsible for implementing such changes into the Test processes., • TEST EQUIPMENT: The Test Engineer Assistant will be responsible for all major Test equipment movements and installations. Also, for the negotiation and provision of all third-party service contracts for Testers used within the Facility. The Test Engineer Assistant will also be responsible for maintaining the appropriate level of spares and consumables for both Testers and Fixtures., • QUOTATIONS / TOOLING: During the quotations process the Test Engineer Assistant will be required to specify and order Test Fixtures required for the Test Process when a new customer is introduced. The Test Engineer Assistant may also be required to specify other non-recurring expenses during this process that will be required to be charged back to the customer., • MEASUREMENTS: The Test Engineer Assistant will be Measured on the following Categories:, • TEST YIELDS, • FALSE FAILURE RATE, • TEST SYSTEM UP and DOWN TIME, • ON TIME DELIVERY FULFILMENT, • SPARES INVENTORY and MaintenanceThe Test Engineer assistant will be responsible for setting up a measure process for the above that will be reported on a weekly Basis., • CUSTOMER FOCUS: The Test Engineer Assistant must recognize their importance in providing Customer Satisfaction, to both Internal and External Customers and must act to provide the best Quality Products, Services and Communication to these Customers.Qualification and Experience:, • Relevant IT education, • Strong PC and network operation and installation skills, • Windows and Linux installation and operation knowledge, • Intermediate English (written and spoken), • 1 year experience in a relevant IT field, • Strong MS office user skillPrimary Skills:, • Communication skills., • Mathematical, analytical skills., • Visual thinking., • Adaptability skills., • Independent work., • Problem solving., • Logical skills., • High Endurance.Secondary Skills:, • Relevant College or University, • Good verbal skills, • IT systems / networks GaKSdnloL4

Job Description CSAT Solutions has always emphasized that outstanding people are the key to our success. We know that outstanding candidates are looking for challenging career opportunities. If you are a highly motivated individual with an entrepreneurial spirit, CSAT Solutions may have a career for you. We invite you to explore the current opportunities available at CSAT Solutions. We are currently seeking qualified candidates to fill the role of a BGA Engineer. Role and Responsibilities • Develop and optimize BGA soldering and reflow profiles, • Perform DFM/DFA/DFT reviews for BGA components, • Analyze and resolve BGA-related failures (open/shorts, head-in-pillow, voiding, warpage), • Support X-ray inspection, AOI, and cross-section analysis, • Work with PCB layout teams on pad design, via-in-pad, escape routing, • Conduct thermal, mechanical, and reliability testing, • Document processes, corrective actions, and engineering reports, • Completes component level trouble shooting (capacitor, resistors, etc.), • Tests, troubleshoots and repairs, complex system failures as required, • Responsible for meeting ISO 9001 and/or other quality system requirements in their department, • Associates degree in Electronics, Computer repair or other technical field preferred, • Minimum 3+ years’ experience in electronics repair, failure analysis, and diagnosis, • Strong knowledge of BGA packaging and PCB assembly processes, • Experience with SMT, reflow soldering, and stencil design, • Hands-on experience with X-ray inspection and failure analysis tools, • Familiarity with high-density interconnect (HDI) boards, • Proficiency in/through hole soldering, optical inspection, surface mount technology, and cross sectioning of printed circuit boards (PCB’s), • Ability to read and interpret schematics/block diagrams with detailed understanding of computer and subassembly functionality, • Experienced in Dye and Pry to evaluate integrity of solder joints, real time X-ray of assemblies, and use of thermal chambers for running specialized tests, • Ability to use electronic test equipment (oscilloscopes & multi-meters, etc.), • Understanding of IPC standards (IPC-7095, IPC-A-610, IPC-2221), • Proficiency working with computers, • Proficient English abilities required, • Email and written messaging with intermediate Excel knowledge, • Strong communication and cross-functional teamwork skills, • Position is based at CSAT Solutions’ NW Houston facility., • Requires standing, walking, and working in a production/repair environment for extended periods., • Must be able to lift up to 25 lbs occasionally., • Regular exposure to electronic components, ESD-protected areas, and repair tools. We value the well-being of our employees and their families. As part of CSAT Solutions, you’ll enjoy a comprehensive benefits package, including: • Medical, Dental, and Vision Insurance, • 401(k) Retirement Savings Plan with company match #hireCSAT

Job DescriptionCompany Description International SOS Government Medical Services, Inc. delivers customized medical and security risk management and wellbeing solutions to enable our clients to operate safely and effectively in environments far from home. Founded in 1984, we operate in 92 countries providing integrated medical solutions to organizations with international operations. Our innovative technology and medical and security expertise focus on prevention, offering real-time, actionable insights and on-the-ground quality delivery. We provide clinical services to include “hands on” direct care at over 800 sites around the world, many of which include inpatient clinical care capabilities. With 12,000 staff (including 5,200 medical and behavioral health providers) our services include the design, deployment, and operation of healthcare solutions including freestanding surgical facilities in remote and austere environments, telemedicine consultation through a wide range of virtual modalities, referrals to a global network of more than 100,000 vetted providers, and global aeromedical evacuation. Within our portfolio of companies, International SOS Government Medical Services, Inc., headquartered in Houston, Texas provides contracted healthcare support to Government defense and civil agencies and government contractors, including support to military exercises and operations, diplomatic missions, natural disasters, and refugee care. To protect your workforce, we are at your fingertips: internationalsos.com Job Description Contingent upon Contract Award. Integrate the contractor’s Quality Control Plan (QCP) with the Government’s Quality Assurance Surveillance Plan (QASP) and the medical Continuous Quality Improvement (CQI) system to ensure services meet the Performance Work Statement (PWS). Drive corrective actions, risk reduction, and continuous improvement across operations and health services. This position is based in Israel. Key Responsibilities: • Own the Quality Control Plan (QCP). Establish, maintain, and evidence a QCP that ensures all PWS requirements are achieved; align with the Government’s QASP surveillance methods., • Implement and oversee the medical Quality Assurance/Continuous Quality Improvement program ensure audits, trending/analysis, and corrective action plans; manage incident and mortality reviews and root cause analysis (RCA)., • Ensure conformance to NDS 2025 and ACA; maintain fire/emergency plans; promptly rectify deficiencies or submit corrective plans to the Contracting Officer’s Representative (COR)., • Participate in inspections and respond to review findings; meet regularly with the Contracting Officer’s Representative (COR) for performance evaluations and issue resolution., • Coordinate with contractor, the Health Services Administrator (HSA), and the Clinical Director to ensure licensure/credentialing, screening timeliness, and emergency response practices meet the PWS and standards., • Ensure completion and documentation of required training, including cardiopulmonary resuscitation (CPR), automated external defibrillator (AED), emergency first aid, four‑minute emergency response, and information security requirements such as Personal Identity Verification (PIV) credentialing and annual Cybersecurity Awareness Training (CSAT)., • Ensure immediate notification/reporting to contractor per criteria; analyze trends from incident data and drive corrective and preventive actions (CAPAs)., • Ensure the Employee Manual includes required content (organization, job descriptions, training, conduct, safety, health, etc.) and acknowledgment documentation; provide documentation of employee review upon COR request., • Oversee compliance with surveillance coverage/monitoring and retention requirements (minimum 60 days; longer for evidentiary recordings not in a case file)., • Verify emergency readiness plans and drills meet applicable standards; ensure timely corrective actions and staff readiness., • Provide monthly/periodic quality, incident/injury, and executive summary reports to facility leadership and the COR. Additional Duties: Compliance with International SOS Government Medical Services, Inc. policies and procedures. Qualifications Basic Requirements/Certifications: • Demonstrated experience establishing and operating a facility QCP; leading CQI in health settings; working with COR; preparing for and passing external audits; managing incident reviews, RCA, and CAPAs., • Bachelor’s degree in a relevant discipline or, • Sitting, standing, walking, climbing, bending/stooping, kneeling, twisting., • Visual acuity. Minimal hearing loss., • Obtain medical clearance and maintain current immunizations., • Must be able to relocate to Israel., • A valid passport is required and must be in your possession prior to relocation. You must maintain a current passport during your stay in Israel., • Ability to obtain a USG clearance. Additional Information Pay range is based on several factors and may vary in addition to a full range of medical, financial, and/or other benefits. Final salary and offer will be determined by the applicant’s background, experience, skills, internal equity, and alignment with geographical market data. Benefits – Full-time positions are eligible for our comprehensive and competitive benefits package including medical, dental, vision, and basic life insurance. Additional benefits include a 401k plan paid time off and an annual bonus. International SOS Government Medical Services, Inc. complies with all federal, state, and local minimum wage laws. International SOS Government Medical Services, Inc. is an equal opportunity employer and does not discriminate against employees or job applicants on the basis of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with the applicable federal, state and local laws.

Job Description We are seeking a Facility Mechanical Utility Engineer to plan and implement daily building maintenance and mechanical tasks while ensuring the reliable operation of utility systems. The ideal candidate will monitor and analyze compressed air and water consumption to drive efficiency improvements and support sustainability initiatives in alignment with ISO 50001 standards. This role is also responsible for managing maintenance documentation, tracking system performance, and coordinating with cross-functional teams to support continuous improvement across facility operations. Key Responsibility * Repair and replace building mechanical equipment. * Update building mechanical drawings as necessary. * Organize inspections, measurements, and manage all documentation related to the building and operations. * Actively participate in the operation and development of the ISO50001 standards. * Monitor and analyze compressed air and water consumption, to develop and implement efficiency improvement measures. * Develop a building inspection system. * Supervise the development of the facility technician's work. * Plan and implement daily building maintenance, mechanical tasks, and manage related documentation (elaboration and development of regular maintenance instructions, inspection sheets). * Organize, implement and provide professional support for regular and preventive maintenance work and inspections of building mechanical equipment. * Creative thinking, good communication, and problem-solving skills. Experience/Education * Degree in building engineering, mechanical engineering, or relevant fields. * At least 2 years of professional experience in a similar field. Benefits: * 401(k) * Dental insurance * Health insurance * Life insurance * Paid holidays * Paid time off Foxconn is an Equal Opportunity Employer and Drug Free Workplace. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Powered by JazzHR tOuguS3fK4

Job Description Job Title/Position: Patient Care Coordinator Reports to: Clinical Manager JOB DESCRIPTION SUMMARY: The Patient Care Coordinator’s (PCC) primary responsibility is to provide administrative support for the Clinical Managers, clinical care staff and patients. The PCC will coordinate daily/weekly/monthly clinical reports, patient supplies and interagency/community referrals. The PCC will also collaborate with agency departments, facilities and physicians as needed to coordinate appointments and/or obtain necessary documents required for care delivery and billing. The PCC must be clinically licensed & have the ability to receive a physician order. This position is primarily in an office environment; however, the PCC may be asked to assume patient overflow during high census situations. ESSENTIONAL JOB FUNCTIONS/RESPONSIBILITIES 1. Collaborate with scheduling department to verify employee/patient schedules are accurate, staff are productive & schedule variances are reconciled., 2. Support patient needs by communicating with field staff when patient assignments need priority i.e., clinical change in condition, with direction from Clinical Manager., 3. Supports safe, effective care delivery by assisting with order review to ensure State and Federal Regulations are satisfied., 4. Supports operations & compliance by effective maintenance of agency Clinical Tasks Reports for variances. These include but are not limited to: Schedule Report, Missed Visit Report, Past Due Visits, Schedule Deviation, Visit Exception & Orphan Documents. Unresolved variances will be escalated to the Clinical Manager., 5. Supports clinical care and billing function by educating and obtaining clinical documents needed for home health billing as needed., 6. Verify admission criteria necessary for Notice of Admission daily and communicate variances to Clinical Manager for follow-up., 7. Assists with care coordination i.e. DME, medical supplies, coordination of appointments or referrals to outside agencies., 8. Facilitates patient care coordination documents with acute and post-acute facilities during patient transfers., 9. Assists with education & training of field staff., 10. Other duties as assigned, may cover for field staff in situations of high census etc. POSITION QUALIFICATIONS 1. One-year home care experience or experience in a facility setting., 2. Must be a licensed clinician with current, active license in good standing in the state the agency is located., 3. Skilled in making effective verbal and written communications with subordinates, co-workers, consumers, referral agencies and comfortable with conflict resolution skills., 4. Ability to educate consumers on all service lines and present to seniors and aides in a group setting, 5. High energy level and passionate about care delivery, 6. Must have excellent organizational skills and ability to complete competing priorities, 7. Must have thorough understanding of home health or hospice qualifying criteria and coverage guidelines, 8. Ability to listen attentively and offer care options based on individual patient health needs, 9. Proficient computer skills ability to navigate Microsoft email, word, excel, power point and home health or hospice agency software system, 10. Must have vehicle, current driver's license and appropriate automobile insurance. ENVIRONMENTAL AND WORKING CONDITIONS: • Office environment with prolonged or considerable sitting and keyboard work., • Some driving/travel involved to possibly conduct patient visits., • Majority of work conducted in a bfast-paced office setting., • Must be able to lift 25 lbs. and handle office supplies and equipment., • Considerable reaching stooping, bending, kneeling or crouching., • Acknowledge my obligation and agreement to fulfill those duties and responsibilities as set forth in the Code of Conduct and Compliance Policies and to be bound by these standards., • Certify that throughout my association with EH I will comply with the terms of the Code of Conduct and Compliance Policies., • Understand that violations of the Code of Conduct and Compliance Policies may lead to disciplinary action, including termination of employment.

Job Description Job Summary The Commissioning Engineer is a project position responsible for the engineering excellence and quality management of one or more commissioning projects. The Engineer supports the greater commissioning team and provides commissioning engineering support during all phases of commissioning project planning and execution. Essential Duties & Responsibilities • Support the Commissioning Manager and Sr. Commissioning Engineer as well as the greater commissioning team in the safe and efficient execution of commissioning projects, • Participate in project design reviews during design development and assist Engineering Contractor as required, • Assist with development of all commissioning documentation including (but not limited to) execution plans, system Commissioning procedures, construction / commissioning check-sheets and project schedule., • Assist with development of facility pre-startup procedures (nitrogen leak testing, nitrogen purging, vessel initial fills, production train circulation, etc.), • Assist with systems completion strategy definition at project kickoff and support systems completion activities as required, • Track and report progress on commissioning activities, • Identify commissioning issues and proposed resolution, • Develop Technical Queries and follow through on resolution, • Interface effectively with operations groups to maintain synergy with project team and facilitate smooth handover of project systems, • Participate in post-project reviews and capture and implement lessons learned for future projects, • Assist with development of engineering manuals, • Develop proposals and bid documentation, • Issue weekly updates (as required), • Ensure client satisfaction through effective project delivery and QA/QC, • Interface with other project disciplines (e.g. Subsea, Export P/L, etc.), • Ensure correct project/deliverable documentation, • Responsible for adhering to GATE policies and procedures in a positive manner, • Proactively work to create positive and professional culture within GATE, • Present at monthly meetings and lunch and learn sessions, • Promote personal and technical development of staff, • Participate in company marketing and sales, • Obtain feedback from clients, • Identify and develop business opportunities, • Minimum 2 to 5 years experience preferred, • Experience writing commissioning or startup procedures preferred, • Relevant engineering degree required (e.g. mechanical, petroleum, process, electrical), • Excellent written and verbal communication skills, • Climbing stairs, ladders, ramps and accessing scaffolding, • Carry tool bags (up to 50 lbs.), • Bending body downward and forward, kneeling, climbing and walking, • Shift = 12 Hours (not to exceed 14 hours unless approved by management)

Job Description Electrical Engineer IV (Power) Location: Duluth, MN | Minneapolis–St. Paul, MN | Omaha, NE | Houston, TX | Pittsburgh, PA | Nashville, TN Remote candidates will also be considered Shape the Future of Power Engineering at Lake Superior Consulting We provide engineering and consulting services across the energy industry — from Oil & Gas to Renewables, Power Generation and Distribution. We’re growing our Power Engineering practice and are seeking an Electrical Engineer to help lead the way. This is more than an Engineering role — it’s an opportunity to: • Help grow the power market and expand our footprint in the energy sector., • Build confidence in our designs and capabilities with clients., • Provide leadership and mentorship to our Jr. electrical engineers, • Grow your skills and learn from our experienced senior engineering staff, • Play a key role in strengthening client relationships by serving as a trusted technical partner. Position Overview The Electrical Engineer (Power) is responsible for executing the electrical engineering scope on moderate to large industrial projects. This includes leading design efforts, coordinating with internal and external stakeholders, managing technical aspects of projects, and ensuring successful delivery through all phases of design and construction. Example scopes include micro-grid power generation facilities, MCC and switchgear specifications and design, facility power distribution, substation design, complex grounding systems, power system studies including arc flash, short circuit, load flow, and coordination. Key Responsibilities • Lead moderate to large-sized electrical power and controls projects, providing technical direction and decision-making on complex issues, • Coordinate with multi-disciplined design teams to deliver complete, high-quality construction documents, • Develop power and controls drawings, specifications, equipment selection, and supporting documentation, • Perform engineering calculations, studies, detailed designs, reports, and design reviews, • Design and support electrical power systems including high, medium, and low voltage systems, switchgear, MCCs, drives, emergency power, service entrances, and power distribution, • Manage project scope changes, identify risks, and support development of mitigation strategies, • Coordinate with internal staff to develop design drawings, perform design reviews, and deliver high quality construction documents, • Communicate effectively with project managers, clients, vendors, and contractors, • Provide field support during front end engineering and construction as needed Required Qualifications • Bachelor’s degree in electrical engineering, • 5+ years of related electrical engineering experience, • Industrial electrical systems design experience, • Direct experience supporting industrial facilities, • Working knowledge of the National Electrical Code (NEC), NFPA 70E, IEEE, API, and AGA recommended practices, • Experience with SKM, ETAP, or EasyPower design software required, • Experience with AutoDesk software; CadWorx Electrical experience a plus Preferred Qualifications • Professional Engineer (PE) license, • Experience with arc flash hazard analysis and electrical equipment upgrades, • Field experience supporting projects during front end engineering and construction, • Broad electrical background including power and controls systems Personal Competencies • Ability to think conceptually and drive projects from conception through implementation, • Strong organizational and prioritization skills with the ability to lead project teams, • Excellent written, verbal, and presentation skills, • Ability to work effectively under pressure and meet tight deadlines, • Adaptability in a fast-paced, changing environment, • Self-motivated with a commitment to delivering high-quality, technically sound designs, • Strong analytical and problem-solving skills, • Ability to work independently and collaboratively with a willingness to learn Company DescriptionTaylor Technical Services began business in 1977. Since then, we have grown to become one of the largest suppliers of Engineering personnel in the Houston/Gulf Coast area and Alaska. We pride ourselves in having recruiters and account managers that have experience and have worked in the oil & gas engineering industry. Specialties: Cad Drafters, Electrical Designers, Instrument Designers, Structural Designers, Piping Designers, Electrical Engineers, Instrument Engineers, Structural Engineers, Mechanical Engineers, Pipe Stress Engineers, EH&S, QA/QC, Procurement, Project Controls, Document Control, AdministrativeTaylor Technical Services began business in 1977. Since then, we have grown to become one of the largest suppliers of Engineering personnel in the Houston/Gulf Coast area and Alaska. We pride ourselves in having recruiters and account managers that have experience and have worked in the oil & gas engineering industry.\r\n\r\nSpecialties: Cad Drafters, Electrical Designers, Instrument Designers, Structural Designers, Piping Designers, Electrical Engineers, Instrument Engineers, Structural Engineers, Mechanical Engineers, Pipe Stress Engineers, EH&S, QA/QC, Procurement, Project Controls, Document Control, Administrative

Job Description Hello, Cascades at Jacinto in Houston, TX is actively looking to hire a full-time Admissions Coordinator. At Cascades at Jacinto, our goal in a skilled nursing facility (SNF) is to provide each patient with top-quality care. We strive to maximize each patient's functional independence to safely discharge her/him to the next level of care. We are a people-first organization. Really! Our guiding motto is leading with integrity, empowering people, delivering outcomes. Job Description: The Skilled Nursing Facility Admissions Coordinator is responsible for coordinating the admission of residents to the facility in accordance with facility policies and procedures: • Provides tours to prospective patients, family members, and other responsible parties, • Coordinates the admission of residents to the facility by communicating with other departments, external organizations, agencies, and healthcare facilities, • Develops and maintains business relationships with discharge planners, case managers, and physicians to generate placement referrals, • Completes the admission packet with the resident and/or responsible party and assists residents in determining how they would like to make decisions about their health care and whether they would like anyone else involved in decisions, • Assists in the orientation program for residents in accordance with facility policies and procedures, • Complete medical/dental/vision insurance benefits, • Employer-matching 401k retirement program, • Up to 16 days' paid time off per year, • Minimum one year prior medical facility Admissions experience (SNF preferred), • High School Diploma, • Exceptional communication and customer service skills, and empathy, • Proficient knowledge of computers and related equipment/software, • Strong knowledge of health insurance systems, • Ability to self-motivate and a willingness to help where needed, • Must be able to read, write, and understand the English language, including ability to interpret scientific and technical information common to medical billing, • Experience with medical terminology, medical billing, and data entry preferred

Job Description Quick job details: • Setting: Rehab Facility, Hospital Owned, • Schedule: Mon-Fri, 8hr shifts, • Hours: 9am-5pm, • Job Requirements: Must have a PT license, experience preferred, new grads welcomed to apply, • Compensation: Competitive, commensurate with experience, • Benefits: Full Benefits package About Us: HealthPlus Staffing is National Leader in the Healthcare Staffing Industry. We partner up with top facilities nationwide with the focus of finding them highly qualified candidates. Our Promise: • We will put you in front of the decision makers., • We will provide feedback on your application., • We will work on your behalf to obtain as much info as you need to make a well-informed decision. If interested in this position, please submit an application or call us at 561-291-7787 to speak with one of our highly experienced consultants. We look forward to finding your next position! The HealthPlus Team.

Job Description JOB TITLE (#1330): Registered Dietitian Health Care Facility Surveyor - Texas CMS's Long-Term Care Basic Training and SMQT certification are required Impact Recruiting Solutions is currently seeking a Registered Dietitian Health Care Facility Surveyor to fill an opening with a Quality Improvement Consulting Company and will work in a technically exciting environment supporting internal and external customers nationwide Requirements of the Registered Dietitian Health Care Facility Surveyor: • Must have an Associate or Bachelor's degree in Dietetics, • Must have successfully completed CMS's Long-Term Care Basic Training and passed the Surveyor Minimum Qualifications Test (SMQT)., • Must have at least two (2) years of recent experience working as a surveyor accrediting or certifying facilities that serve the residents of long-term care facilities., • Must maintain current licensure to practice as a Registered Dietitian, • Demonstrated history of independent decision-making skills to direct and effectively manage the survey process., • Ability to set priorities independently and collectively in performing survey tasks., • Ability to openly discuss conflicts/controversy, and to seek assistance when appropriate to make decisions and resolve conflicts., • U.S. Citizenship is required for this position, • The salary for this position is competitive and negotiable, • This is a Full-time position (Monday - Friday), • Flexible paid vacation days, • Paid holidays, • Company-issued and company-paid Amex card for travel, • All travel expenses paid directly by the company, • Airline and hotel points accumulate for employee's personal use, • Employee discounts, • Employee retirement plan (401k) with a generous match and immediate vesting, • Company-paid tax-free Health Savings Account (HSA), • Health insurance, • Dental insurance, • Vision insurance, • Company-paid life insurance, • Company-paid disability insurance, • Extensive training opportunity

Job Description The Staff Physical Therapist assumes part and/or full time clinical responsibility in an assigned facility. This is a professional position with the primary responsibility of evaluation of residents and direct resident care. Additional duties of an administrative nature are to be performed as assigned. Qualifications: The Physical Therapist must have: • Able to stand (2) or more hours without interruptions or breaks, • Able to push, pull, move, and or lift a minimum of 50 pounds to a minimum of 4 feet or carry 50 lbs. a minimum of 2 feet, • Must be able to perform all resident transfers, (including stand pivot maneuver, 2 person, sliding board, Hoyer Lift, non-weight bearing) safely and effectively with or without mechanical devices., • Must be able to Sit, Stand, bend, lift and move intermittently throughout the day, • Must be able to assist with the evacuation of residents during emergency situations, • Must pass Medical and Physical examination based on job qualifications, requirements and duties/responsibilities, • Must have the willingness to work with severely physically, emotionally and cognitively compromised H. Must be able to take direction from other team members to promote resident treatment and safety I. Must be willing to work in an environment with risk of personal injury, exposure to infections waste/materials, infectious diseases and odors, • Must be able to cope with the emotional stress associated with working with residents, families and Co-workers, • Must be able to work independently with periodic (daily or less) support and direction, • General computer skills or the ability to learn, • Must be alert and attentive to residents and work environment throughout the day, • Must be able to shift attention and task performance based on resident and facility requirements, • Must be able to work in a fast-paced work environment, • Must be able to read, understand, and comply with all facility based policy and procedures, • Must have visual, hearing and sensory skills adequate to preserve resident and personal safety, • Duties and Responsibilities:, • Assumes responsibility for the screening, evaluation and treatment of facility residents/residents needing physical therapy services, • Reviews medical information and conducts screenings prior to evaluations to determine resident’s need for services and ability to benefit from skilled services., • Performs resident evaluations under physician order and develops a treatment plan in accordance with resident needs., • Implements treatment plan through direct treatment, education of treatment staff and supervisor of physical therapy staff., • Assumes responsibility for continual professional growth and development, by participating in continuing education programs, and other appropriate learning experiences., • Maintains confidentiality of all resident, facility and physical related information., • Maintains accurate billing information in accordance with facility procedures on a daily basis., • Attends and participates in interdisciplinary meetings as appropriate to relay clinical findings and recommendations to other members of the rehab team., • Attends and participates in family meetings as appropriate., • Adheres to documentation requirements of Rehabilitation department and the facility., • Conducts staff training/education as appropriate via formal and informal in-services and consultations., • Reviews and follows the policies and procedures outlined by the facility and company Policy & procedure manual., • Supervises Certified Physical Therapy Assistants and rehabilitation aides/extenders as indicated by resident needs and state laws and discipline practice act., • Contributes to a positive work team by sharing information, using problem-solving methods and accepting new ideas, constructive criticism, or advice from others., • Demonstrates superior customer service through professionalism, courtesy, consistent follow-up and positive communication The Buckingham is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, The Buckingham will provide reasonable accommodations to qualified individuals with disabilities and encourages prospective employees and incumbents to discuss potential accommodations with The Buckingham.

Job Description Physical Therapist Needed For Home Health Visits in Kingwood/Humble and Surrounding Areas Come join BrightStar Care of Kingwood/Humble!!! We are a client-centric team that holds value in quality care and serving with passion. Our higher-standard way has brought BrightStar Care to the top of Home Health care and we want individuals with desire to maintain such standards and change people's live for the better. Our commitment to incorporating advance technology has offered our employees an opportunity to deliver their best performance. The Physical Therapist must be able to evaluate the patient's condition and develop an individualized plan tailored to each client based on the physician's orders. Help clients enhance strength, range of motion, flexibility, and minimize pain or discomfort. Work as much or as little as you want, with our highly flexible schedule. Benefits: * Weekly pay with direct deposit * Flexible Schedule * Referral Bonus * GPS time and attendance technology enhances your access to key scheduling and care information * Variety of assignments, procedures, and treatments * Weekend and evening opportunities, in-home and facility based * One to one patient care * We are Joint Commission accredited * Every agency is independently owned and operated. Responsibilities * Work cooperatively with physicians to develop care and treatment plan that is appropriate for client's home environment, especially as it relates to fall risk, interventions, and home safety * Assess for muscle strength, mobility, gait, range of motion and pain and select appropriate treatment and assistive devices, instructing family and caregivers on use of devices * Report client's response to treatment or changes in condition to the Director of Nursing and physician * Initiate physical therapy program and instructs other personnel, including family members and caregivers, in specific phases of physical therapy with which they may assist with the client care * Prepare clinical and progress summaries, as well as participate in discharge planning. A copy of the summaries will be submitted to the Director of Nursing * Treat clients, families, and staff with courtesy and respect Requirements * Graduated with a master's or higher degree in physical therapy from an accredited physical therapy program * Passed a National Physical Therapy Examination (NPTE) and/or state examination required by the state * State licensure in state where care is being provided * Two (2) years of appropriate experience as a physical therapist. Community/home health is preferred * Adhere to HIPAA and maintain client confidentiality We are an Equal Opportunity Employer and do not discriminate against applicants due to race, ethnicity, gender, veteran status, or on the basis of disability or any other federal, state or local protected class.

Job DescriptionProduction Technician (Contract) $21–$24 per hour (based on experience) Monday–Friday, 8:00 AM–5:00 PM (Overtime as needed) 3-Month Contract (Potential for extension or hire)What Matters Most • Competitive pay of $21–$24 per hour, depending on experience, • Day shift schedule: Monday–Friday, 8:00 AM–5:00 PM, • 3-month contract opportunity with hands-on technical experience, • Weekly pay with direct deposit or pay card, • Access to medical, dental, vision insurance, 401(k), and referral bonus program through The Reserves NetworkJob DescriptionThe Production Technician is responsible for assembling, calibrating, testing, and auditing Uson leak test products to ensure they meet all specifications, drawings, and quality standards. This role supports production operations by troubleshooting issues, maintaining accurate documentation, and following ISO-9001 and EHS requirements. The ideal candidate will have hands-on electro-mechanical and mechanical assembly experience and thrive in a fast-paced manufacturing environment. Responsibilities, • Design, assemble, calibrate, test, and audit leak test products according to specifications and procedures, • Perform basic troubleshooting on the production floor and provide feedback for continuous improvement, • Verify product conformance to specifications, application protocols, and audit documentation, • Maintain accurate and timely documentation for job hours, BOMs, parts usage, and production data, • Adhere to ISO-9001 standards, EHS regulations, and quality policies while maintaining a clean and organized workspaceQualifications and Requirements, • High school diploma or equivalent required; technical or associate degree preferred, • Minimum 2 years of experience in electro-mechanical technology, leak testing, or mechanical assembly, • Working knowledge of electronic, pneumatic, and mechanical components, • Ability to read and interpret drawings, schematics, and work instructions, • Strong communication skills, attention to detail, and ability to identify and escalate issuesBenefits and Perks, • Pay rate of $21–$24 per hour, • Medical, dental, and vision insurance options, • Weekly pay with direct deposit or pay card

Job DescriptionDescription: Description Job Title: Medical Credentialing Specialist Department: Compliance Reports to: Compliance Officer Summary: The Credentialing and Records Coordinator is responsible for maintaining active status for all providers by successfully completing initial and subsequent credentialing packages as required by the organization, commercial payers, Medicare and Medicaid. This position will also be responsible for gathering, processing and maintaining patient records and reporting patient information for health standards. Essential Duties And Responsibilities: • Processing provider applications and facility to all health plans. Abstracting pertinent data and completing payor specific enrollment documents to assure claims acceptance. Processing and tracking of applications to ensure timely enrollment, and providing the revenue cycle department with provider ID numbers for claims processing., • Maintaining the provider enrollment database. Updating the database with new providers, and with changes in provider information. Suggesting updates to the application to improve efficiency., • Enter and maintain provider applications, contracts, and updates into the practice/provider Credentialing files., • Complete Medicare enrollments via internet PECOS and work with local MACs for provider enrollment issues, • Complete variety of state Medicaid enrollments, • Verify prospective and current providers’ license, liability insurance, CDS certificate, and DEA certificate, providers’ education, hospital privileges, board certification, malpractice coverage and other criteria as required., • Track payer contract applications status and provider participation levels, including recredentialing/revalidation requests., • Meet required turnaround times and accuracy rates., • Facilitate provider-related research based on suspended claims, address returns, and other feedback opportunities., • Gathers patient information by collecting demographic information from a variety of sources; interacting with registration areas and physicians' offices; retrieving information from automated printer., • Process attorney release of records within 72 hours of patient being seen., • Maintains master patient index by completing assigned portion of daily audit trail; corrects and communicates problems according to established procedures., • Maintain a daily audit trail of release of medical records; corrects and communicates problems according to established procedures., • Initiates the medical record by creating and processing the patient care record folder., • The coordinator will process charts through Medical Records Drive; documenting reasons charts cannot be retrieved for statistical and follow-up purposes., • Keeps health law firms informed by communicating availability or unavailability of the record., • Perform other duties as assigned in CBO within skillset.Requirements: Qualifications: • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily., • The requirements listed below are representative of the knowledge, skill, and/or ability required. Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience.

Job DescriptionCompany Description International SOS Government Medical Services, Inc. delivers customized medical and security risk management and wellbeing solutions to enable our clients to operate safely and effectively in environments far from home. Founded in 1984, we operate in 92 countries providing integrated medical solutions to organizations with international operations. Our innovative technology and medical and security expertise focus on prevention, offering real-time, actionable insights and on-the-ground quality delivery. We provide clinical services to include “hands on” direct care at over 800 sites around the world, many of which include inpatient clinical care capabilities. With 12,000 staff (including 5,200 medical and behavioral health providers) our services include the design, deployment, and operation of healthcare solutions including freestanding surgical facilities in remote and austere environments, telemedicine consultation through a wide range of virtual modalities, referrals to a global network of more than 100,000 vetted providers, and global aeromedical evacuation. Within our portfolio of companies, International SOS Government Medical Services, Inc., headquartered in Houston, Texas provides contracted healthcare support to Government defense and civil agencies and government contractors, including support to military exercises and operations, diplomatic missions, natural disasters, and refugee care. To protect your workforce, we are at your fingertips: internationalsos.com Job Description This position is in support of the John Hopkins research team. This is a worldwide rapid deployment team that will support John Hopkins research efforts on behalf of the US Department of State. The MRI Technician will be available to deploy worldwide within 72 hours of notification. The MRI technician will observe the MRI scan at a designated MRI facility, and provide the protocol for the MRI scan via USB stick to an in-country MRI technician (when permission is not granted to use the machine at the site) and observe that the scan is being completed according to the protocol. Key Responsibilities: • Travels with team internationally within 72 hours of notification., • Conduct MRI IAW the protocol, • Observe local MRI tech perform procedure., • Downloading of images, safeguarding, and delivery to client., • Maintains all supplies and equipment through travel., • Submits travel vouchers within 5 days of return, • Completes required organizational compliance education, including assigned requirements that are client-specified, for Joint Commission Healthcare Staffing Services certification or other regulatory bodies. Required Skills and Knowledge: • Graduate of an accredited program for MRI tech/certificate programs., • Certificate from the American Registry of Radiological Technicians., • Ability to successfully perform BLS interventions in accordance., • Minimum of 5 years’ experience., • Experience using General Electric (GE), Philips Healthcare, Siemens, Toshiba and Cannon medical MRI devices. (Required knowledge of all systems), • MRI w/contrast, • Experience placing PIV's preferred, • US Citizen or Permanent Resident Card is required., • Must be able to travel within 72 hours of notification internationally., • A valid passport is required and must be in your possession prior to relocation. Additional Information Pay range is based on several factors and may vary in addition to a full range of medical, financial, and/or other benefits. Final salary and offer will be determined by the applicant’s background, experience, skills, internal equity, and alignment with geographical market data. Compensation | Min: $60Hr Max: $65Hr Benefits: This position is eligible for our comprehensive and competitive benefits package including medical, dental, vision, and basic life insurance. Additional benefits include a 401k plan and paid time off and annual bonus. International SOS Government Medical Services, Inc. complies with all federal, state, and local minimum wage laws.

Job DescriptionTHE ROLE The Production Supervisor oversees production scheduling, quality control, and team supervision to ensure optimal workflow and timely delivery of products. They foster strong customer relationships by managing service operations, resolving issues, and maintaining clear communication. Additionally, they lead continuous improvement initiatives to enhance process efficiency, monitor key performance metrics, and promote a culture of accountability and collaboration within the team. SKILLS REQUIRED ORGANIZATIONAL - Leadership & Organization: • The ability to effectively plan and organize production timelines to ensure timely delivery and efficient workflow., • Skill in managing and optimizing the coordination of tasks across different departments to enhance productivity., • The ability to foster strong relationships with customers through effective communication, ensuring satisfaction and timely issue resolution., • Skilled in training and mentoring employees, promoting collaboration, accountability, and a positive work culture., • The ability to identify operational inefficiencies and implement solutions to enhance throughput and reduce waste., • Skilled in leading and supporting initiatives aimed at improving process efficiency and minimizing downtime., • Provide leadership in maintaining a safe working environment and a commitment to safety excellence., • Responsible for understanding and complying with the safety policy, procedures, and instructions., • Drive adherence to RMS Employee Handbook, settle disagreements, partner with HR as needed, and foster a positive shop floor environment., • Ensure on-time completion of Performance Evaluations and perform regular maintenance to Employee Skill & Training Matrix., • Manage and coordinate departmental Leads (Welding, Machining, Mechanic, Balance) to ensure on-time completion of jobs., • Assist Quality Control personnel in trouble-shooting NCRs or with RCAs as needed., • Partner with Shop Scheduler and Operations Manager to drive on-time delivery of all projects., • Coach craft labor during disassembly, inspection, repair, and assembly of complex rotating equipment., • Maximize “utilization” while ensuring shop resources are working on scheduled tasks while understanding job priorities., • Attend production meetings, giving updates and suggestions, as necessary., • Identify opportunities for standardization with respect to work practices and routers., • Coordinate Preventative Maintenance activities with Facilities & Scheduling on shop capital equipment., • Assist in planning turnaround work to be conducted in the Pearland Works facility., • Familiarity with OEM products (AC Compressor / Conmec / RMS) with ability to quickly understand non-OEM rotating equipment., • Ability to expertly comprehend complex drawings and procedures on various types of rotating equipment including centrifugal, gear, and screw compressors; hot gas and nitric acid expanders; steam turbines & TTVs, etc., • Familiarity with Welding / fabrication of major sub-components, and also knowledgeable with Rotating Elements & principles of low-speed balancing., • Set up and performing of hydro or gas leak test., • Communicate with supervision, crafts, and Project Managers during the inspection and repair process., • Must have excellent organizational skills., • Expert in use of precision measuring equipment (mic, caliper, etc.)., • Ability to lead in a team environment., • Ability to coach / mentor within the extended team., • Ability to work overtime, weekends and holidays, as required., • Ability to work in an environment of constant pushing, pulling, lifting, stretching, bending and other physical activities., • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting, as required., • Ability and willingness to work around and use large propane / acetylene torches., • Ability to operate small lifts, pallet jacks, and other lifting equipment., • Strong oral and written communication skills. The above list of activities is not all inclusive but a general representation of the requirements of an RMS Production Supervisor. This list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS • 15+ years in relevant turbomachinery industry in shop environment., • High School Diploma or equivalent from an accredited institution., • This position will be based full-time in our Pearland Works facility located in Pearland, TX, • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • Ability and willingness to lift objects weighing up to 30 lbs. (50 lbs. with assistance), walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembly and tool usage., • While performing the duties of this position the employee will be required to stand, sit, bend, and walk for significant portions of the shift., • Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Able to understand, read, write, and speak English., • Authorized to work in the United States. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Who We Are U.S. Aviation Services is a leading provider of ground support and facility cleaning services for some of the nation’s busiest airports. As part of the United Service Companies family, we bring decades of experience, innovation, and dedication to the aviation industry. From terminal cleaning and baggage handling to cabin services and more, our expert teams work behind the scenes to keep the travel experience running smoothly and safely for millions of passengers each year. With operations at major hubs across the country, U.S. Aviation Services combines a national footprint with a local team spirit—built on safety, service, and respect. Our mission is to create cleaner, safer environments while supporting the essential workers who make air travel possible every day. As a contracted ground handler for commercial airline carriers and cargo operators, services that we provide are, but not limited to: • Airport Operations Customer Service Agents and Baggage Handlers, • Cargo Operations Customer Service Agents, Cargo and Mail Handlers, TSA approved Screening, • Cabin Services Cabin cleaning, Lavatory services, Cabin Security Checks At U.S. Aviation Services, you’ll find more than just a job—you’ll find a career with purpose. We offer a welcoming, team-focused culture where your hard work is recognized, and opportunities for advancement are always within reach. Whether you're new to the workforce or looking for a change, we provide the training, support, and flexibility you need to succeed. We’re proud to support our employees with: ✔ Flexible Schedules – Full-time and part-time shifts available to fit your lifestyle ✔ Weekly Pay – Get paid on time, every week ✔ Competitive Wages -Cargo agents start at $15 per hour ✔ Paid Training – No experience? No problem—we’ll teach you everything you need to know ✔ Opportunities for Growth – Many of our supervisors and managers started on the front lines Cargo Agent Duties and Responsibilities • Ensure the safety and security of all cargo tendered for transportation and distribution., • Follow all government and operational regulations., • Install straps, braces, and padding to loads to prevent shifting or damage during shipment., • Assemble containers and crates used to transport items such as machines or vehicles., • Direct or participate in cargo loading to ensure completeness of load and even distribution of weight., • Direct delivery trucks to shipping doors or designated marshaling areas and help load and unload goods safely., • Route received goods to first available flight or to appropriate storage areas or departments, using forklifts, hand trucks, or other equipment., • Retrieve stored items and trace lost shipments as necessary., • Attach address labels, identification codes, and shipping instructions to containers., • At least 18 years or older., • A valid, government issued workers permit., • Ability to pass a 10-year background check, pre-employment drug screen, obtain a SIDA badge and USPS certification., • High school graduate or GED., • Able to stand, walk, bend, and crouch for prolonged periods., • Able to lift up to 25-75 lbs. We value our team members and are proud to offer a competitive benefits package that includes: • 401(k) retirement account with company match, • Health, dental, vision, and life insurance, • Paid time off and holiday pay, • Uniforms provided, • Employee referral program, • Work in a fast-paced, exciting airport environment United Service Companies is committed to fostering, cultivating, and preserving a culture of diversity and inclusion. We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Our commitment extends beyond preventing discrimination and harassment; it’s about creating an environment where diverse backgrounds and perspectives are valued. We believe in the power of our people, the ideas they bring, and what we can accomplish together. Consistent with the Americans with Disabilities Act (ADA), all state & federal requirements, it is the policy of United Service Companies to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. United Service Companies also provides reasonable accommodations as required under the Pregnant Workers Fairness Act (PWFA) for limitations related to pregnancy, childbirth, or related medical conditions. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact the Recruitment Team 813-425-1985.

Job DescriptionWe are seeking a dedicated and compassionate Licensed Practical Nurses (LPN) to join our team in a Long-Term Acute Care (LTAC) facility in Clear Lake, TEXAS. LPN's will provide high-quality, patient-centered care to individuals with complex medical conditions requiring extended hospitalization. Working under the supervision of an RN or physician, the LPN will assist with direct patient care, medication administration, monitoring of vital signs, and collaboration with interdisciplinary teams to ensure the best possible patient outcomes. Position: LVN / LPN Location: Clear Lake, Texas Schedule: AM & PM shifts Unit: LTAC Hospital Starting Hourly Pay: $40.00 What You'll Do: As an LPN in a Long-Term Acute Care (LTAC) facility, you will play a critical role in providing direct patient care to individuals with complex, high-acuity medical needs. LTAC patients often require extended hospitalization due to conditions such as respiratory failure, chronic wounds, post-surgical complications, and severe infections. The LPN works closely with Registered Nurses (RNs), physicians, and other healthcare professionals to ensure patients receive continuous and specialized care. • Requirements:, • LPN license in State of Assignment or compact license, • 1 year of Medical Surgical or 1 year of LTAC, • Must have BLS, ACLS (preferred) IV Certification or equivalent, • Immunizations; TB, Covid & FluWhy join us:, • Professional Growth: Expand your nursing proficiency and knowledge while experiencing a range of cases and scenarios that enrich your career journey., • Commitment to Excellence: Join a team that is committed to providing the highest standard of patient care. We prioritize excellence in healthcare delivery and continuous improvement in our practices., • Positive Work Environment and Team Culture: Emphasize if your healthcare team has a positive work environment where collaboration, support among team members, and a strong team culture are prioritized., • Deliver direct nursing care, including wound care, respiratory support, and infection control management., • Administer medications and treatments as prescribed by physicians., • Monitor and document patient conditions, reporting any changes to the RN or physician., • Assist with activities of daily living (ADLs) such as bathing, feeding, and mobility support., • Maintain accurate and up-to-date patient records., • Collaborate with interdisciplinary teams, including therapists, dietitians, and social workers, to develop and implement individualized care plans., • Provide emotional support and education to patients and their families. Requisition #cm70nmjygqoso0im8kt6sj5sk

Job DescriptionAdelphi is seeking Bilingual Speech-Language Pathologists to provide services to students at schools in Houston, Texas. The ideal candidates will deliver culturally and linguistically responsive speech and language services in English and the student’s primary language to support communication development and academic success. Job Quick Facts: • ID: BD-1259-02, • Profession: Allied Health, • Specialty: Bilingual-Speech Language Pathologist, • Location: Houston, Texas, • Facility Type: School, • Job Type: Contract, • Shift Schedule: Mon-Fri, Specific schedule TBC, • Rate: $65/hr Requirements: • Master’s degree in Speech-Language Pathology, • Valid Texas SLP license and ASHA CCC-SLP, • Demonstrated bilingual proficiency (English + Target Language) Responsibilities: • Conduct comprehensive bilingual evaluations using culturally and linguistically appropriate assessment tools., • Provide speech and language therapy in the student’s dominant language, as appropriate, to ensure equitable access to services., • Accurately document the language of assessment and service delivery in accordance with IDEA and district requirements., • Collaborate with families, bilingual educators, and multidisciplinary team members to support student progress., • Participate in ARD/IEP meetings and contribute compliant, data-driven recommendations., • Perform any other duties as assigned.

Job Description Job Summary: We are seeking a skilled and detail-oriented Powder Coating Painter to join our team for a NIGHT SHIFT position. The successful candidate will be responsible for applying powder coatings to various metal parts and products to achieve a durable and aesthetically pleasing finish. This role requires a keen eye for detail, excellent manual dexterity, and a strong commitment to quality. Key Responsibilities: • Set up and operate powder coating equipment, including spray guns, booths, and ovens., • Apply powder coatings according to specifications and color requirements., • Ensure proper coverage and thickness of coatings by adjusting spray equipment and techniques., • Monitor and maintain coating equipment to ensure optimal performance and safety., • Follow all safety protocols and maintain a clean and organized work area., • Collaborate with other team members to ensure efficient workflow and timely completion of projects., • High school diploma or equivalent., • Strong attention to detail and commitment to producing high-quality work., • Good physical stamina and manual dexterity., • Ability to work independently and as part of a team., • Proven experience as a powder coating painter or similar role., • Familiarity with powder coating equipment and techniques., • This position involves working in a manufacturing environment with exposure to chemicals, dust, and noise., • Ability to stand for extended periods and perform repetitive tasks., • Competitive salary based on experience., • Paid time off and holidays., • Life InsuranceCompany DescriptionSouthern Product Finishing, Inc. is a high-volume industrial powder coating facility serving manufacturers across Texas. We specialize in large-format and high-quality coatings, emphasizing professionalism, reliability, and consistency. We’re looking for a hands-on, detail-oriented Batch Department Supervisor to lead our batch powder coating operations and ensure that production goals, quality standards, and safety requirements are met every day.Southern Product Finishing, Inc. is a high-volume industrial powder coating facility serving manufacturers across Texas. We specialize in large-format and high-quality coatings, emphasizing professionalism, reliability, and consistency. We’re looking for a hands-on, detail-oriented Batch Department Supervisor to lead our batch powder coating operations and ensure that production goals, quality standards, and safety requirements are met every day.

Job Description B2B Outside Sales Representative Enviro-Master Services – Houston (League City/Galveston/South of Webster) Position Description: The B2B Outside Sales Representative manages an exclusive geographic territory (League City/Galveston/South of Webster) and is responsible for growing sales and retaining existing customers by providing knowledge and sharing excellence, gaining new sales through new customers and products, onboarding customers, and providing customers with education, knowledge, and awareness through quality control. WHAT’S IN IT FOR YOU • Enjoy a robust paid training program., • Plan and manage your schedule in a flexible, independent work environment., • Enjoy a base salary and uncapped commissions – drive your income!, • Qualify to receive monthly bonuses and other recognition and rewards., • Expense allocations for fuel and smart phone use., • Carve out a long-term, advanced career path in sales or other areas within Enviro-Master Services., • Target Compensation (includes $45K base + commission + bonus), • Develop and manage an exclusive sales territory., • Discover, engage, and cultivate new prospective customers., • Develop short and long sales cycle opportunities, with emphasis on restaurant/food establishments, fitness centers, recreation complexes, industrial, automotive, manufacturing, retail, and education industries., • Perform Needs Analysis based on the customer’s required visit frequency (weekly, monthly, or quarterly) and evaluate each to assess opportunities for customer improvements and savings., • Facilitate the sale of Enviro-Master products by providing solutions for improvements through existing products and new innovations., • Hard-working, goal-driven hunter with a strong entrepreneurial spirit, and the drive to build wealth., • Organized self-starter and motivated problem solver., • Clear and effective communication skills (both written and verbal),, • Interpersonal, time management and presentation skills as well as the ability to develop strong and lasting business relationships., • Comfortable working in a fast-paced, dynamic environment., • Exceptional attention to detail. · Generous PTO · Dental and Vision · Technology and vehicle allowance EDUCATION AND EXPERIENCE • Bachelor’s degree preferred., • 3 years business to business cold call sales experience required., • Must have a valid driver’s license, an acceptable Motor Vehicle Record, and a reliable vehicle., • No overnight travel except for annual convention and 1-2 regional meetings per year., • Experience in selling food or restaurant supplies, facility supplies, or routed services is a plus (linens, chemicals, uniforms, safety equipment & supplies, food products, etc.)

Job Description At Compu Dynamics, we don't just build infrastructure—we create the backbone of the digital future. As North America's premier technology infrastructure design-build partner, we design, construct, and maintain mission-critical data centers for some of the world's most innovative companies. With roots in one of the fastest-growing data center markets in the world, our growth is as intentional as our impact. About Compu Dynamics Modular Compu Dynamics Modular (CDM) is at the forefront of innovative modular solutions, specializing in Modular Data Centers (MDC), metal frame systems, and fully integrated enclosures. Our designs are scalable, efficient, and sustainable, tailored to meet the evolving needs of our clients in a dynamic industry. Summary/Objective: The Vice President of Modular Manufacturing is responsible for launching and leading Compu Dynamics Modular's (CDM) state-of-the-art modular data center manufacturing facility. This executive role combines strategic leadership with operational execution to spearhead CDM's transition from traditional modular construction to precision manufacturing of cutting-edge AI/HPC infrastructure. The VPMM will lead all aspects of facility planning, organizational development, operations, engineering integration, and cross-functional alignment—ensuring on-time, high-quality delivery of world-class modular solutions. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. 1. Strategic Facility Development & Operational Launch • Lead the full lifecycle of facility design, development, and commissioning., • Define and execute the operational blueprint, manufacturing workflows, layout, and equipment selection., • Launch manufacturing capabilities supporting GPU-optimized modules, integrated power and network systems, and liquid cooling solutions. 2. Executive Leadership & Organizational Development • Build and lead the modular manufacturing division, including engineering, production, QA/QC, logistics, and safety., • Develop and implement the full organizational structure; hire and mentor high-performing teams., • Drive a culture of accountability, safety, quality, and innovation throughout the organization. 3. Operational Excellence & Production Oversight • Oversee all production domains including welding, painting, mechanical/electrical integration, testing, and final module shipment., • Establish robust operational systems including ERP, inventory control, and capacity planning., • Implement lean manufacturing and Six Sigma principles to optimize throughput and minimize waste. 4. Quality, Compliance & Safety Systems • Develop rigorous QA/QC processes for high-density computing environments and complex infrastructure modules., • Maintain ISO 9000 and other relevant certifications, ensuring compliance with all regulatory and industry standards., • Promote and enforce a culture of continuous improvement, safety, and operational discipline. 5. Strategic Planning & Cross-Functional Integration • Align manufacturing strategy with CDM's business objectives, collaborating with executive leadership, engineering, sales, and project teams., • Lead forecasting, budgeting, and P&L management for the manufacturing division., • Develop vendor-agnostic integration practices with support for diverse OEM platforms. Competencies: • Visionary leadership with proven executive experience in manufacturing or modular construction., • Expertise in modular data center fabrication and complex mechanical/electrical systems integration., • Exceptional cross-functional collaboration and communication skills., • Deep understanding of lean manufacturing, ISO compliance, and AI/HPC infrastructure requirements., • Financial and strategic acumen including P&L ownership and budget management., • Strong track record in facility launch, team scaling, and sustainable growth. Supervisory Responsibility: This role has executive responsibility for all manufacturing personnel and operations. The VPMM will initially lead the hiring and development of a 25+ person team across production, engineering, QA/QC, and logistics—with potential for future expansion. Travel: Up to 20% for vendor coordination, site visits, executive meetings, and industry events. Required Education and Experience: • Bachelor's degree in Engineering, Construction, Manufacturing, or related field., • 10+ years of senior/executive leadership experience in modular manufacturing, prefabrication, or industrial facility operations., • Experience launching new manufacturing facilities or product lines from concept to full-scale production., • Demonstrated success leading multidisciplinary technical teams across engineering, logistics, and production., • Background in quality systems (ISO 9000+), lean principles, and modular integration technologies. Preferred Education and Experience: • Advanced degree (MBA, MS in Engineering or Operations)., • Experience in data center, critical infrastructure, or high-tech modular environments., • Familiarity with liquid cooling systems and advanced thermal management., • ERP implementation experience and vendor-agnostic manufacturing leadership., • Recognized certifications in operations, quality, or safety (e.g., Six Sigma Black Belt, PMP). Physical Demands: While performing the duties of this job, the employee is regularly required to walk manufacturing floors, climb stairs, and inspect equipment installations. Must be able to lift materials up to 50 pounds occasionally and work in manufacturing environments with varying temperatures, noise levels, and safety requirements. Requires extended standing and walking on manufacturing floors. Position Type: This is a full-time, exempt position. EEO Statement: Compu Dynamics, LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, gender identity, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type will not be tolerated. Other Duties: Please note this job description is not designed to cover or contain a comprehensive list of activities or responsibilities that may be required. Duties and responsibilities may change at any time with or without notice. Military Codes: 120A, 6042, & 5915 #PM23 Compu Dynamics Pay Range$180,000—$250,000 USD Compu Dynamics offers a comprehensive benefits package that supports the health, well-being, and growth of our team members. Full-time employees are eligible for: * Medical, Dental, and Vision Insurance – effective the first of the month following hire, with plans currently offered through Cigna. * 401(k) Retirement Plan – automatic enrollment at 3% on your date of hire; company match up to 4% (with a 7% contribution needed to receive the full match), plus profit-sharing opportunities. * Employer-Paid Life Insurance – coverage equal to 1x your salary. * Short-Term Disability (STD) – fully paid by Compu Dynamics. * Voluntary Benefits – including Long-Term Disability, supplemental life insurance (employee, spouse, children), Accident, Critical Illness, and Hospital Indemnity coverage. * Paid Time Off (PTO) – accrue up to 160 hours (4 weeks) annually, beginning after 60 days of employment. * Paid Holidays – 7 company-observed holidays plus a floating holiday. * Birthday Time Off – 8 hours of paid time off during your birthday month. * Paid Parental Leave – 8 weeks maternity leave and 2 weeks paternity leave, concurrent with FMLA. * Volunteer Time Off (VTO) – 40 hours annually for community service. • Boot Reimbursement – up to $150 annually, available from your first day. Tool Reimbursement – $250 annually, available after 60 days. * Tuition Reimbursement – up to $5,000 annually for approved educational programs. Compu Dynamics, LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, gender identity, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of these characteristics. All employment offers are contingent upon successful completion of our pre-employment drug screening, background/criminal check, and motor vehicle check.

Job DescriptionRadiation Therapist – Contract Location: Houston, TX 77024 Contract Duration: 13 Weeks Pay Rate: * Local: $47/hour * Travel: $55/hour Shift & Schedule * Shift Type: Day Shift * Schedule: Monday–Friday * Hours: 8:00 AM – 5:00 PM Position Overview "Navitas Healthcare, LLC" is seeking a qualified Radiation Therapist for a 13-week contract assignment at a leading healthcare facility in Houston, TX. The Radiation Therapist will play a critical role in delivering high-quality radiation therapy services, ensuring accurate treatment delivery, patient safety, and compassionate care throughout the treatment process. Key Responsibilities * Administer prescribed radiation therapy treatments to patients * Perform treatment simulations and assist with dosimetric calculations * Operate, calibrate, and maintain Linear Accelerator (LINAC) equipment * Monitor patients during treatment and promptly report any adverse reactions * Educate patients on treatment procedures and address questions or concerns * Maintain accurate, detailed, and compliant patient treatment records * Collaborate with physicians, nurses, medical physicists, and other clinical staff Requirements * Proven experience working with LINAC equipment * Active BLS certification * ARRT-T (Radiation Therapy) certification * Medical Radiologic Technologist (MRT) license issued by the Texas Medical Board (TMB) For more details contact at or Call / Text at 516-862-1169. About Navitas Healthcare, LLC certified WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job Description At Compu Dynamics, we don't just build infrastructure—we create the backbone of the digital future. As North America's premier technology infrastructure design-build partner, we design, construct, and maintain mission-critical data centers for some of the world's most innovative companies. With roots in one of the fastest-growing data center markets in the world, our growth is as intentional as our impact. About Compu Dynamics Modular Compu Dynamics Modular (CDM) is at the forefront of innovative modular solutions, specializing in Modular Data Centers (MDC), metal frame systems, and fully integrated enclosures. Our designs are scalable, efficient, and sustainable, tailored to meet the evolving needs of our clients in a dynamic industry. Summary/Objective: The Vice President of Modular Manufacturing is responsible for launching and leading Compu Dynamics Modular's (CDM) state-of-the-art modular data center manufacturing facility. This executive role combines strategic leadership with operational execution to spearhead CDM's transition from traditional modular construction to precision manufacturing of cutting-edge AI/HPC infrastructure. The VPMM will lead all aspects of facility planning, organizational development, operations, engineering integration, and cross-functional alignment—ensuring on-time, high-quality delivery of world-class modular solutions. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. 1. Strategic Facility Development & Operational Launch • Lead the full lifecycle of facility design, development, and commissioning., • Define and execute the operational blueprint, manufacturing workflows, layout, and equipment selection., • Launch manufacturing capabilities supporting GPU-optimized modules, integrated power and network systems, and liquid cooling solutions. 2. Executive Leadership & Organizational Development • Build and lead the modular manufacturing division, including engineering, production, QA/QC, logistics, and safety., • Develop and implement the full organizational structure; hire and mentor high-performing teams., • Drive a culture of accountability, safety, quality, and innovation throughout the organization. 3. Operational Excellence & Production Oversight • Oversee all production domains including welding, painting, mechanical/electrical integration, testing, and final module shipment., • Establish robust operational systems including ERP, inventory control, and capacity planning., • Implement lean manufacturing and Six Sigma principles to optimize throughput and minimize waste. 4. Quality, Compliance & Safety Systems • Develop rigorous QA/QC processes for high-density computing environments and complex infrastructure modules., • Maintain ISO 9000 and other relevant certifications, ensuring compliance with all regulatory and industry standards., • Promote and enforce a culture of continuous improvement, safety, and operational discipline. 5. Strategic Planning & Cross-Functional Integration • Align manufacturing strategy with CDM's business objectives, collaborating with executive leadership, engineering, sales, and project teams., • Lead forecasting, budgeting, and P&L management for the manufacturing division., • Develop vendor-agnostic integration practices with support for diverse OEM platforms. Competencies: • Visionary leadership with proven executive experience in manufacturing or modular construction., • Expertise in modular data center fabrication and complex mechanical/electrical systems integration., • Exceptional cross-functional collaboration and communication skills., • Deep understanding of lean manufacturing, ISO compliance, and AI/HPC infrastructure requirements., • Financial and strategic acumen including P&L ownership and budget management., • Strong track record in facility launch, team scaling, and sustainable growth. Supervisory Responsibility: This role has executive responsibility for all manufacturing personnel and operations. The VPMM will initially lead the hiring and development of a 25+ person team across production, engineering, QA/QC, and logistics—with potential for future expansion. Travel: Up to 20% for vendor coordination, site visits, executive meetings, and industry events. Required Education and Experience: • Bachelor's degree in Engineering, Construction, Manufacturing, or related field., • 10+ years of senior/executive leadership experience in modular manufacturing, prefabrication, or industrial facility operations., • Experience launching new manufacturing facilities or product lines from concept to full-scale production., • Demonstrated success leading multidisciplinary technical teams across engineering, logistics, and production., • Background in quality systems (ISO 9000+), lean principles, and modular integration technologies. Preferred Education and Experience: • Advanced degree (MBA, MS in Engineering or Operations)., • Experience in data center, critical infrastructure, or high-tech modular environments., • Familiarity with liquid cooling systems and advanced thermal management., • ERP implementation experience and vendor-agnostic manufacturing leadership., • Recognized certifications in operations, quality, or safety (e.g., Six Sigma Black Belt, PMP). Physical Demands: While performing the duties of this job, the employee is regularly required to walk manufacturing floors, climb stairs, and inspect equipment installations. Must be able to lift materials up to 50 pounds occasionally and work in manufacturing environments with varying temperatures, noise levels, and safety requirements. Requires extended standing and walking on manufacturing floors. Position Type: This is a full-time, exempt position. EEO Statement: Compu Dynamics, LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, gender identity, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type will not be tolerated. Other Duties: Please note this job description is not designed to cover or contain a comprehensive list of activities or responsibilities that may be required. Duties and responsibilities may change at any time with or without notice. Military Codes: 120A, 6042, & 5915 #PM23 Compu Dynamics Pay Range$180,000—$250,000 USD Compu Dynamics offers a comprehensive benefits package that supports the health, well-being, and growth of our team members. Full-time employees are eligible for: * Medical, Dental, and Vision Insurance – effective the first of the month following hire, with plans currently offered through Cigna. * 401(k) Retirement Plan – automatic enrollment at 3% on your date of hire; company match up to 4% (with a 7% contribution needed to receive the full match), plus profit-sharing opportunities. * Employer-Paid Life Insurance – coverage equal to 1x your salary. * Short-Term Disability (STD) – fully paid by Compu Dynamics. * Voluntary Benefits – including Long-Term Disability, supplemental life insurance (employee, spouse, children), Accident, Critical Illness, and Hospital Indemnity coverage. * Paid Time Off (PTO) – accrue up to 160 hours (4 weeks) annually, beginning after 60 days of employment. * Paid Holidays – 7 company-observed holidays plus a floating holiday. * Birthday Time Off – 8 hours of paid time off during your birthday month. * Paid Parental Leave – 8 weeks maternity leave and 2 weeks paternity leave, concurrent with FMLA. * Volunteer Time Off (VTO) – 40 hours annually for community service. • Boot Reimbursement – up to $150 annually, available from your first day. Tool Reimbursement – $250 annually, available after 60 days. * Tuition Reimbursement – up to $5,000 annually for approved educational programs. Compu Dynamics provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state and local laws. Compu Dynamics complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Compu Dynamics expressly prohibits any form of unlawful employee harassment based on race, color, religion, gender, sexual orientation, national origin, age, genetic information, disability or veteran status. Improper interference with the ability of Compu Dynamics employees to perform their expected job duties is absolutely not tolerated.

Job Description Location: On site in Houston, TX Department: Tech Ops Reports to: Chief Technical Officer About CTMC CTMC is a pioneering biotech joint venture, formed by National Resilience and MD Anderson Cancer Center, located in the heart of the Texas Medical Center. Our mission is to accelerate cell therapies from bench to bedside. We offer a wide range of cell therapy modalities, including CAR-T, TIL, and TCR-T. Our expert team collaborates closely with MD Anderson’s research and clinical faculty, bringing impactful cell therapies to cancer patients. Since inception in May 2022, our team has filed eight INDs and have received approval, without delay, demonstrating our commitment to delivering innovative treatments to patients with speed and precision. Our alliance with National Resilience enables us to remain at the forefront of biomanufacturing practices, leveraging advanced technology and processes to deliver exceptional results. Our growing, state-of-the-art, 60,000 sq. ft. industrial facility in the Texas Medical Center is staffed by an integrated team of industry veterans and academic scientists who are passionate about bringing life-saving cures to patients. Our unique joint venture structure, with two highly established partners, provides us with the financial stability and long-term horizon to achieve our organizational goals. At CTMC, we value our employees and offer a variety of development opportunities within our novel corporate structure to inspire professional growth and satisfaction. We foster a team-first culture and a balanced work-life environment to ensure our staff is energized and engaged in our mission to accelerate cell therapies from bench to bedside for patients who need them. If you share our passion for advancing the frontiers of medical science with innovative therapeutics and want to join a highly dedicated team committed to delivering novel cures to patients, we invite you to submit your application. We look forward to hearing from you and exploring how your skills and expertise can help us achieve our mission. Responsibilities The Sr Manager Digital GxP Systems is tasked with developing standard approaches and components that will be used to build LIMs and MES recipes and integration throughout the CTMC network. The role will assist local teams in the Design, Development, Delivery and CSV of the LIMs and MES solutions for CTMC. • Develop and integrate LIMs and MES common and site-specific components., • Benchmark on innovative solutions (external and internal to CTMC)., • Dynamically adapt road map to site evolution/strategic directions, and new trends/issues., • Establish a strong site culture based in CTMC values, expectations, and operational excellence standards., • Support LIMs / MES solutions deployment and start up activities., • Serve as System owner for LIMs and MES systems, • Work with site resources towards replication & standardization to drive value and implement the appropriate technical solutions., • Evaluate emerging technologies and implications to existing CTMC Digital systems., • Maintain open communication with MES / LIMs vendor(s) to address needs in standard solutions or via functional packs., • Evaluate and translate functional requirements into technical solutions., • Ensure project and/or validation documentation is maintained during lifecycle & release management., • Develop assist in the creation and maintenance of the LIMs and MES interfaces with other Digital systems., • Provide guidance and direct activities to ensure manufacturing facility and support areas comply to applicable regulations and industry best standards., • Lead and participate in projects within the organization’s objectives and project timelines and participate in cross-functional projects as the quality subject matter expert., • Collaborate with other leaders across the organization and assist in the continuous improvement., • The role is responsible for system design, implementation, and lifecycle management of LIMs and MES systems., • Provide leadership or support in the implementation of LIMS and MES systems, drawing on prior experience with LabVantage and other LIMS platforms, as well as commercial EBS solutions such as MES., • Collaborate with key stakeholders to capture business requirements and translate them into functional specifications., • Oversee or prepare system design documentation, including URS, FRS, DS, configuration specifications, and data flow diagrams., • Provide technical guidance on master data setup, workflows, system configuration, and reporting functions., • Prepare, review, and approve GMP documentation (e.g., Non-Conformances, Procedures, Protocols, Specifications, and Change Controls) to ensure quality and user requirements are met., • Participate in computer system validation (CSV), computer software assurance (CSA), and qualification activities according to GAMP 5 and 21 CFR Part 11., • Maintain validation status and support periodic reviews and change management processes., • Ensure data integrity and regulatory compliance throughout the system lifecycle., • Conduct investigations and impact assessments for deviations, audit findings, and system issues related to electronic systems., • Support internal and external audits and inspections by regulatory authorities such as the FDA., • Train and mentor users and administrators on system functionality and compliance requirements., • Work with vendors and IT teams to facilitate system upgrades and support structures., • Remain informed about industry trends and emerging technologies in digital quality systems., • Bachelor’s Degree in IT, Engineering, or related technical field., • 12+ years of GxP experience in Pharmaceutical Industry or equivalent combination of education and experience., • 5+ years of strong experience with LIMS and MES system implementations., • Professional experience working in a GXP, regulated environment., • Pharmaceutical Manufacturing Regulatory compliance knowledge and experience (cGMP)., • Effective people and team leadership skills., • Ability to manage and contribute to multiple concurrent activities and adapt to changes in priorities., • Ability to cross functionally collaborate., • Excellent written and oral communication skills., • Demonstrate creativity, analytical thinking, and the ability to troubleshoot and solve problems., • Knowledge of cloud solutions and architecture., • History of promoting safety and maintaining a safe work environment, • Demonstrated adherence to compliance for internal and external quality guidance., • Demonstrate and promote Operational Excellence, • Effectively encourage knowledge sharing and education, • Evaluate and translate functional requirements into technical solutions., • Proven technical ability to develop and integrate MES and LIMs solutions., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software. Working Conditions, Equipment, Physical Demands The incumbent in this position works in an office and clean room environment. The incumbent in this position will use the following equipment and shall have the following physical demands: Equipment- • Computer, • Printer, • Facsimile, • Telephone Physical Demands- • Frequent standing, walking, sitting, and reaching required., • Frequent lifting up to 10 lbs. required., • Occasional lifting, pushing, and pulling up to 50 lbs. required., • Frequent use of computer/keyboard required. The physical demands and work environment that have been described are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with the Americans with Disabilities Act. The above job description is an overview of the functions and requirements for this position. This document is not intended to be an exhaustive list encompassing every duty and requirement of this position; your supervisor may assign other duties as considered necessary.

Job Description We are looking for year-round Family Experience & Enrollment Representative in Cypress! This is a great company, with a supportive and fun culture! They will uphold the Aqua-Tots Core Values in every interaction, whether with children, parents or staff members. We offer: • Daily and weekly bonuses!, • Top-notch job training, • An awesome work environment, • Flexible hours, • Year-round positions, • Competitive pay, starting at $15/hr!, • Lots of FUN and lots of teamwork!, • Fun, • Friendly, • Reliable...consistency is KEY for our awesome kiddos!, • Energetic, • Outgoing, • Great team players, • Greet customers when they come into the facility, • Communicate effectively with potential and existing customers, • Build relationships with families and get to know their names and their children's names, • Handle customer complaints gracefully with a win/win outcome, • Report to manager if complaints are unresolved

Job DescriptionDescription: Company Overview: DermaTouch RN is a state-of-the-art aesthetic and wellness center located in Houston and San Antonio, TX. Our facility offers a wide variety of beauty and wellness treatments, from Botox® and dermal fillers to health and wellness treatments. We pride ourselves on being an "Advanced Injector" clinic and one of the top providers of Botox®, dermal fillers, and CoolSculpting in Texas. Our team, consisting of experienced physicians, licensed aesthetic nurses, and expert support staff, represents decades of education and experience in medical science, holistic health, diet, and nutrition. Job Summary: As an Aesthetic Injector, you will be responsible for delivering elective care for cosmetic complaints through various non-surgical injection procedures. This role involves taking medical histories, performing examinations, developing treatment plans, and administering treatments as directed by the supervising physician. You will play a pivotal role in providing compassionate care and achieving exceptional aesthetic outcomes for our valued clients. Additionally, you will collaborate with our practice team, ensure compliance with industry standards and regulations, and use your clinical expertise and artistic sensibility to help clients achieve their aesthetic goals. To excel in this position, you must be self-motivated, well-organized, and willing to provide clients with exceptional customer care. You should be eager to expand your knowledge base and be comfortable recommending our services and product lines to meet client needs. What We Offer: • Comprehensive training (4-6 weeks of paid training with experienced aesthetic professionals)., • Health benefits, dental insurance, and vision coverage., • 401(k) plan., • Paid time off (PTO) and 8 paid holidays., • Provide direct patient care as a representative of the physician, adhering to authorized practice guidelines and state law., • Conduct new patient intake, including reviewing medical history, discussing aesthetic concerns, explaining practice procedures, and establishing treatment plans., • Perform aesthetic services and other agreed-upon procedures, maintaining accurate medical records of all treatments., • Ensure patient understanding that they are being treated by a nurse practitioner., • Regularly review delegated patient services and guidelines with the supervising physician., • Maintain treatment rooms and work areas in compliance with OSHA standards., • Manage inventory and supplies for injectable products. Secondary Duties: • Collaborate with team members for comprehensive client care., • Ensure client comfort and safety throughout treatments., • Uphold infection control, sanitation, and safety standards., • Adhere to OSHA, HIPAA, and licensure requirements., • Stay updated on industry trends and techniques., • Collect photo and video content for social media., • Self-promote aesthetic services and treatments, building your client base., • Engage in ongoing professional development and training. Requirements: Education and Experience: • Valid state licensure as a Registered Nurse (RN), Nurse Practitioner (NP), or Physician Assistant (PA)., • Prior training and experience with Botox and Dermal Fillers preferred but not required., • Wide-ranging knowledge of skin care treatment and pathology., • Strong problem-solving and analytical skills., • Excellent communication skills., • Ability to work collaboratively as a team member., • Well-organized with meticulous attention to detail., • Empathetic approach to patient needs and concerns.

Job Description Location: Houston, TX (Onsite) Department: Equipment Reports to: Manager, Equipment About CTMC CTMC is a pioneering biotech joint venture, formed by National Resilience and MD Anderson Cancer Center, located in the heart of the Texas Medical Center. Our mission is to accelerate cell therapies from bench to bedside. We offer a wide range of cell therapy modalities, including CAR-T, TIL, and TCR-T. Our expert team collaborates closely with MD Anderson’s research and clinical faculty, bringing impactful cell therapies to cancer patients. Since inception in May 2022, our team has filed eight INDs and have received approval, without delay, demonstrating our commitment to delivering innovative treatments to patients with speed and precision. Our alliance with National Resilience enables us to remain at the forefront of biomanufacturing practices, leveraging advanced technology and processes to deliver exceptional results. Our growing, state-of-the-art, 60,000 sq. ft. industrial facility in the Texas Medical Center is staffed by an integrated team of industry veterans and academic scientists who are passionate about bringing life-saving cures to patients. Our unique joint venture structure, with two highly established partners, provides us with the financial stability and long-term horizon to achieve our organizational goals. At CTMC, we value our employees and offer a variety of development opportunities within our novel corporate structure to inspire professional growth and satisfaction. We foster a team-first culture and a balanced work-life environment to ensure our staff is energized and engaged in our mission to accelerate cell therapies from bench to bedside for patients who need them. If you share our passion for advancing the frontiers of medical science with innovative therapeutics and want to join a highly dedicated team committed to delivering novel cures to patients, we invite you to submit your application. We look forward to hearing from you and exploring how your skills and expertise can help us achieve our mission. Responsibilities As an Equipment Engineer, you will provide technical oversight of all Cell Therapy and Viral Vector equipment and will work with the Manufacturing and Quality Control departments during the full equipment life cycle. This role supports day-to-day operations, equipment qualification, preventive maintenance, and troubleshooting across all critical GMP departments, including such equipment as incubators, Biological Safety Cabinets, Lovos, Prodigies, and any new Cell Therapy equipment. • Establish and maintain preventive and predictive maintenance programs to maximize equipment uptime., • Troubleshoot equipment issues, perform root-cause analyses, and drive corrective actions., • Collaborate with external service providers to ensure timely, compliant service activities., • Update Maximo CMMS promptly upon completion of maintenance tasks., • Author and execute IQ/OQ/PQ protocols in compliance with GMP and regulatory guidelines (FDA, ICH)., • Partner with Quality, Validation, and Manufacturing teams to ensure equipment qualification documentation is accurate and audit ready., • Manage equipment change controls and support technical assessments for deviations and CAPAs, ensuring adherence to timelines., • Train manufacturing and laboratory staff on proper equipment operation procedures, when required., • Ensure that changes, maintenance and other interventions do not adversely impact the qualification state of the equipment., • Lead/support the tech transfer of new equipment and unit operations across Equipment development and manufacturing, • Provide technical oversight during development of equipment and Equipment system User Requirements and related Design Review/Qualification documentation to ensure equipment and systems are appropriate for intended purpose., • Provide guidance in development of test plans for Verification packages and associated critical components., • Provide guidance on key elements of return to service requirements for equipment after interventions such as maintenance., • Assist during internal and external audits, providing technical expertise and documentation as required., • Assist and support routine maintenance activities, if required., • Work cross functionally among Equipment Development, Manufacturing, Quality Control, Quality Assurance, IT and other departments as assigned., • Meet and report key performance indicators in alignment with Cell Therapy Manufacturing and CTMC goals., • Identify opportunities to optimize equipment performance, reduce costs, and enhance reliability through innovative solutions and best practices., • Bachelor’s degree in Engineering., • 7+ yr’s. relevant experience, preferably in the biotech industry or equivalent combination of education and experience., • 4+ yr’s. experience in a regulated manufacturing environment., • Proficient with Microsoft Office: Word, Excel, Outlook and Teams., • Experience in Equipment Development laboratory operations with various cell manufacturing platforms including closed systems for the development of T-cell therapy products., • Demonstrated ability to collaborate effectively in a multi-disciplinary team., • Demonstrated strong communication skills, interpersonal skills and a superior drive for results., • Excellent written, oral, interpersonal and presentation skills and the ability to effectively interface with senior management and staff., • Excellent judgment and creative problem-solving skills, including negotiation and conflict resolution skills., • Previous experience with audits preferred., • Meticulous attention to detail in terms of documentation and following SOPs., • Able to work a flexible schedule including nights, weekends, and holidays with short advance notice. Working Conditions, Equipment, Physical Demands The incumbent in this position works in an office, labs, and clean room environments. The incumbent in this position will use the following equipment and shall have the following physical demands: Equipment- • Computer, • Printer, • Facsimile, • Telephone, • Manufacturing equipment Physical Demands- • Frequent standing, walking, sitting, and reaching required., • Frequent lifting up to 10 lbs. required., • Occasional lifting, pushing, and pulling up to 50 lbs. required., • Frequent use of computer/keyboard required. The physical demands and work environment that have been described are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with the Americans with Disabilities Act. The above job description is an overview of the functions and requirements for this position. This document is not intended to be an exhaustive list encompassing every duty and requirement of this position; your supervisor may assign other duties as considered necessary.

Job Description Shift: Monday-Friday 7:00pm-3:30am Rate: $28.00-$30.00 Based on Experience ROLE: Provide mobile X-Ray and EKG (if applicable) service to nursing homes, health care facilities, and other miscellaneous facilities. TASKS AND RESPONSIBILITIES: • Perform and process X-Rays using portable digital (DR) or computed (CR) radiography equipment and submit/transmit them to a Radiologist for interpretation., • Unload portable X-Ray equipment and take into facilities to perform exams ordered by the physician. Must obtain clinically diagnostic, technically competent x-ray images., • Perform EKGs (as needed) and transmit them to a Cardiologist for interpretation. (if required), • Scan exam related paperwork/billing documents on a daily basis per protocol., • Regularly communicate with dispatch and management., • Communicate efficiently and interact professionally with peers, supervisory staff, and clients., • Maintain vehicle and x-ray equipment. REQUIRED SKILLS: • Maintain required State licenses and/or ARRT Certification, health requirements, and operational requirements., • Valid driver’s license in the applicable state and in good current standing at all times., • Attend meetings as required., • Connect and disconnect Holter Monitors (if required)., • Technologist must care for their equipment in a professional manner. Upon malfunction of any equipment, the supervisor should be notified immediately., • Perform special projects or other duties as assigned by Supervisor/Manager, • Train other technologists as required., • Self-motivated, dependable, and work independently with little to no direct supervision. ROLE: Provide mobile X-Ray and EKG (if applicable) service to nursing homes, health care facilities, and other miscellaneous facilities. TASKS AND RESPONSIBILITIES: • Perform and process X-Rays using portable digital (DR) or computed (CR) radiography equipment and submit/transmit them to a Radiologist for interpretation., • Unload portable X-Ray equipment and take into facilities to perform exams ordered by the physician. Must obtain clinically diagnostic, technically competent x-ray images., • Perform EKGs (as needed) and transmit them to a Cardiologist for interpretation. (if required), • Scan exam related paperwork/billing documents on a daily basis per protocol., • Regularly communicate with dispatch and management., • Communicate efficiently and interact professionally with peers, supervisory staff, and clients., • Maintain vehicle and x-ray equipment. REQUIRED SKILLS: • Maintain required State licenses and/or ARRT Certification, health requirements, and operational requirements., • Valid driver’s license in the applicable state and in good current standing at all times., • Attend meetings as required., • Connect and disconnect Holter Monitors (if required)., • Technologist must care for their equipment in a professional manner. Upon malfunction of any equipment, the supervisor should be notified immediately., • Perform special projects or other duties as assigned by Supervisor/Manager, • Train other technologists as required., • Self-motivated, dependable, and work independently with little to no direct supervision. Duty and Responsibility Statements • Login for self-dispatching or call into the dispatch department to obtain information regarding beginning case load., • Arrive at their first case or location where they pick up company vehicle at the start of their assigned shift or have left their house thirty (30) minutes prior., • Wear company uniform, company-provided name tag and radiation badge, and follow company dress code., • Carry the company-provided phone on his/her person., • Respond to all urgent communication within fifteen (15) minutes., • Check voicemail/text messages from each client’s facility upon completion of their assigned case(s); or minimally every thirty (30) minutes or as necessary., • Check for available cases via self-dispatching system and/or check in with the dispatcher on duty every thirty (30) minutes., • Upon arriving at facility, ALL ORDERS MUST BE CHECKED FOR ACCURACY AGAINST THE EXAMS(S) LISTED IN THE PATIENT’S CHART AS ORDERED BY THE PHYSICIAN. If the orders in the chart are different or if there are no orders in the chart, the exam cannot be completed until the appropriate order is documented in the chart to match the exam listed on the requisition., • The technologist is responsible to ensure they have the correct patient by asking for two patient identifiers, such as their name and date of birth. (DO NOT ASK YES/NO QUESTIONS). If the patient is unable to identify themselves, the NURSE IN CHARGE of the patient must identify. The nurse’s name should be documented on the requisition, as well as, in the tech’s comments in the verification screen., • Before the patient images are sent to telerad for a reading, the technologist must ensure they have the correct patient images marked with the correct patient information., • Practice the proper radiation protection at all times. Each technologist is issued the appropriate equipment to ensure that the proper radiation protection standards are being met., • The consumption of alcoholic beverages, illegal substances or possession of weapons is prohibited as cited in the Associate Handbook., • Communicate any changes to criminal background and adhere to our drug-free workplace policy as cited in the Associate Handbook, • Behave and conduct themselves in a professional and ethical manner according to Our Code of Conduct., • Not refuse to perform an assigned case regardless of its location., • Not call the referral site for purposes other than providing an ETA., • Record all hours worked into timesheet accurately and timely per protocol., • Technologist with company owned, leased, or rented vehicles must properly care for the vehicles in conjunction with the maintenance manager per company policies and procedures., • Technologists must maintain speed limits and traffic rules in accordance to local and state laws when operating a company owned, leased, or rented vehicle – refer to Company Vehicle and Driving Policy., • Technologists with company owned, leased, or rented vehicles are responsible for paying all motor vehicle tickets, including parking and speeding tickets., • Technologists must maintain a valid driver’s license at all times and be able to produce the license on demand. It is the responsibility of the technologists to provide a copy of such licenses(s) and/or certificate(s) to the appropriate TridentCare personnel. All associates are subject to periodic driver’s license checks., • Technologist must have medical physical examinations and TB screening at time of hire and annually, along with annual infection control in-service. Documentation and/or results of said examinations/tests must be provided to TridentCare Human Resources Department within two (2) weeks of the associate’s date of last annual exam., • Facility staff are to conduct any required patient transfers, support, positioning and/or assistance. Technologists are not to engage in these patient transfers, assistance and/or support activities. #MBX

Job Description We operate 2 Dippin' Dots and 2 Doc Popcorn locations each weekend at this facility.This is primarily a weekend position supervising the 4 stands and 4-5 employees each weekend. You will be a backup to the onsite manager. General duties include getting supplies ready for each of the 4 locations, overseeing the operation during the day and working with the employees to close down the stands and then reconcile the sales for each of them. On Sunday after closing you will cash out with the facility manager. There are 10 weekends between February and the end of May that are non-negotiable during which time you would be the team leader on duty. The schedule is a little more flexible at other times. Company DescriptionWe operate 2 franchises - Dippin' Dots and Doc Popcorn. We are all event based and work at the George R Brown Convention Center, Traders Village, have a Dippin' Dots food truck. We do catering such as corporate events, weddings, bar mitzvahs, quinceaneras as well as school fundraising. Every day is something new and different.We operate 2 franchises - Dippin' Dots and Doc Popcorn. We are all event based and work at the George R Brown Convention Center, Traders Village, have a Dippin' Dots food truck. We do catering such as corporate events, weddings, bar mitzvahs, quinceaneras as well as school fundraising. Every day is something new and different.

Job Description Thank you for considering our Director of Rehab position at Cascades at Jacinto in Houston TX. This is a salaried position with eligibility to receive a monthly bonus. We are hiring an Occupational Therapist (OT) for this position. At Independence Rehab, our goal in a skilled nursing facility (SNF) is to provide each patient with top-quality care. We strive to maximize each patient's functional independence to safely discharge her/him to the next level of care. We are a people-first organization. Really! Our guiding motto is leading with integrity, empowering people, delivering outcomes. Job Duties: • The Director of Rehab oversees the entire therapy department including part-time, full-time, and PRN staff members, • Attend regular facility multi-disciplinary management meetings, • Manage relationships with facility leadership/administration, • Interview/hire therapy staff in cooperation with Recruiting, • Create work schedules for the therapy team, • Effectively manage department revenues/expenses to ensure sustainable profitability, • Be the "face of the company" with patient family members and friends, • Carry a regular patient caseload. Minimum 50% productivity (expectations vary depending upon the size of the facility), • Understand and ensure the therapy team maintains strict compliance with government regulations and guidelines, • Prior DOR experience preferred, but not required, • Sincere love & concern for the geriatric population. They are who matter most!, • Driven, teachable, detail-oriented, organized, • Current Texas Occupational Therapist license in good standing, • Minimum one year of experience treating patients in a skilled nursing facility, • Solid understanding of Medicare, Medicaid, and private-pay reimbursement guidelines (PDPM), • Competent & confident leading and motivating others

Job Description We are hiring a B2B Inside Sales Specialist to support and grow our commercial and industrial business across the Houston metro area. This role is ideal for a consultative B2B sales professional with experience selling technical or industrial solutions who can manage complex buying cycles and communicate value to multiple stakeholders. Experience in commercial or industrial lighting is a strong advantage, but professionals with a proven background selling industrial, building systems, energy, or facility solutions are also encouraged to apply. You will manage the full sales cycle—from prospecting through close—while selling performance-driven lighting and building-infrastructure solutions that improve efficiency, compliance, and workplace environments. Compensation & Benefits Base Salary: $50,000 Commission: Competitive, uncapped On-Target Earnings (OTE): $100,000+ in year one Total Earning Potential: $50,000 – $120,000+ annually Benefits Include: • Health insurance (employee contribution required), • Paid Time Off (PTO), • Paid holidays, • Company-provided laptop and sales tools, • Travel reimbursement (as applicable) Territory & Market Focus You will work with B2B clients across the Houston Metroplex, including: • Industrial and manufacturing facilities, • Warehouses and distribution centers, • Healthcare systems and medical buildings, • Educational institutions, • Commercial offices, • Municipal and government facilities Key Responsibilities • Generate new business through outbound prospecting, inbound lead follow-up, and account development, • Build relationships with facility managers, operations leaders, procurement teams, engineers, and executives, • Sell commercial and industrial lighting systems, including LED upgrades, retrofits, and controls, • Conduct consultative sales conversations to identify operational, energy, and compliance needs, • Present the technical, financial, and operational benefits of lighting and building-infrastructure solutions, • Manage the entire B2B sales cycle from initial contact through close, • Maintain accurate CRM records, pipeline tracking, and forecasts, • Coordinate with internal teams to ensure smooth handoff and customer success Required Qualifications • B2B inside sales or technical sales experience, • Proven ability to run full-cycle sales (prospecting through close), • Experience selling industrial, commercial, or technical solutions, • Strong communication and presentation skills, • Ability to explain technical concepts in a clear, business-focused way, • Highly organized, self-motivated, and goal-driven, • Valid driver’s license and dependable personal vehicle Preferred / Strong Plus • Experience selling lighting solutions (LED, retrofits, lighting controls, or lighting systems), • Background in industrial, healthcare, education, or municipal markets, • Experience working with facility upgrades, energy projects, or building systems, • Represent advanced lighting technology with strong differentiation, • Sell solutions that improve efficiency, compliance, and workplace performance, • Join a fast-growing B2B organization with strong market demand, • High-earning potential with uncapped commissions and career growth

Job Description Roof Technology Partners delivers expert commercial roofing solutions built on engineering-driven design, technical expertise, and long-term performance. We specialize in reroofing, service, maintenance, and restoration for complex facilities across the Southeast, using innovative approaches to solve real roofing challenges. At Roof Technology Partners, we offer more than a job, we offer the opportunity to build a lasting career with a team committed to safety, quality, and customer success. Roof Technology Partners is seeking an experienced Commercial Roofing Sales Representative to drive new business and grow long-term client relationships. This role is ideal for a motivated professional who thrives on building pipelines, closing deals, and delivering value-based solutions to commercial customers. You will be responsible for developing service and reroof opportunities, partnering with operations to deliver successful projects, and representing our company with integrity and professionalism in the market. What's in it for you? • Competitive Base Salary + Uncapped Commissions, • PTO, • 401k, • Paid Holidays, • Company Truck & Gas card, • Health Insurance + Stipend, • Prospect and develop new commercial roofing opportunities, • Build and manage a consistent pipeline of service and reroof projects, • Conduct site visits, inspections, and client meetings, • Prepare proposals and present solutions to customers, • Partner with estimating and operations to ensure smooth project delivery, • Close sales while maintaining target gross margins, • Maintain accurate CRM updates and relaible forecasts, • 3+ years of commercial roofing sales experience OR 5+ years of B2B construction sales with proven success, • History of meeting or exceeding sales targets, • Strong understanding of commercial roofing systems and scopes of work, • Disciplined approach to pipeline management and forecasting, • Ability to sell on value and protect margins, • Strong communication, organization, and customer relationship skills

Job DescriptionAdelphi is seeking Dyslexia Teachers to provide services to students at schools in Houston, Texas. The ideal candidates will deliver structured, evidence-based literacy intervention to support students with dyslexia and related reading difficulties. Job Quick Facts: • ID: BD-1259-15, • Profession: Instructional, • Specialty: Dyslexia Teacher, • Location: Houston, Texas., • Facility Type: School, • Job Type: Contract, • Shift Schedule: Mon-Fri, Specific schedule TBC, • Rate: $45/hr Requirements: • Valid Texas teaching certificate, • Bachelor's degree or higher in special education, • Required dyslexia training or Reading Specialist certification Responsibilities: • Provide evidence-based dyslexia intervention services in alignment with the Texas Dyslexia Handbook, IDEA requirements, and district guidelines., • Deliver systematic, explicit, and multi-sensory structured literacy instruction tailored to individual student needs., • Collect, analyze, and document student progress data to evaluate growth., • Collaborate with general education teachers, intervention teams, and families to support consistent implementation of instructional strategies., • Participate in ARD/IEP meetings and contribute professional recommendations toward literacy goals., • Perform other nursing-related duties as assigned.

Job DescriptionAdelphi is seeking Special Education Teachers to provide services to students at schools in Houston, Texas. The ideal candidates will deliver specialized instruction and implement individualized education programs to support students with disabilities in achieving academic success Job Quick Facts: • ID: BD-1259-14, • Profession: Instructional, • Specialty: Special Education Teacher, • Location: Houston, Texas., • Facility Type: School, • Job Type: Contract, • Shift Schedule: Mon-Fri, Specific schedule TBC, • Rate: $40/hr Requirements: • Bachelor’s degree in Special Education, • Valid Texas Special Education certification Responsibilities: • Develop, implement, and regularly update measurable IEP goals, accommodations, and modifications aligned to TEKS standards and individual student needs., • Deliver differentiated, evidence-based instruction in inclusive, resource, or self-contained settings to ensure access to the general education curriculum., • Collect, analyze, and report student performance data to monitor progress toward IEP objectives and inform instructional adjustments., • Collaborate proactively with general education teachers and multidisciplinary team members to ensure effective implementation of instructional strategies., • Perform other nursing-related duties as assigned.

Job DescriptionEngineer- Piping Layout & Design Expertise • Degree (BS preferred) in Mechanical, Piping Design & Drafting, or relevant discipline., • 10+ years relevant experience working in conceptual design, pre-FEED, FEED, EPCI projects, on-shore projects, modules and skidded equipment, and design. Experience in piping layout for onshore process plants preferred., • Demonstrate the ability to work across multiple disciplines, independently consolidate and analyze information from various sources to develop effective, complete, and holistic client solutions., • Demonstrates advanced knowledge in instrument and process piping lay outs, structure support lay outs, and 3D modeling., • Possesses knowledge and practical use of modeling software such as AutoCAD, 3D CAD (PDMS) or equivalent., • Develop the whole facility layout drawing/ model with complete piping systems integrating other package/ product design drawings into the model identifying any gaps, conflicts, or inconsistencies., • Ensure designs adhere to applicable industry and project standards with a mind to ensuring that the structures will ultimately meet targeted regional / country regulations and standards., • Produce piping Material Take-Off documents for finalized submission and authorization for construction., • Release all project/ product Issued for Construction (IFC) drawings and specifications., • Provide clarifications to the fabricators, suppliers, and sub-contractors during fabrication as required., • Attend design review meetings, engineering interface meetings, Health Safety and Environment (HSE) workshops, risk workshops, etc. with clients/ contractors, and internal teams as required., • Support project teams throughout the design, construction, transportation, and installation portion of the project and provide guidance to the project engineering teams as required.

Job DescriptionMantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility—inside and out—and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. General Purpose: The Sales Executive, Data Center BMS Solutions will drive client growth for our data center facility solutions, specifically related to building automation systems. This role involves identifying and developing building management system (BMS) strategies that improve operational efficiency, sustainability, and energy performance. You will work closely with controls engineers, sales engineers, project managers, and client stakeholders to audit current systems, develop control strategies, build solution proposals, and close project opportunities. This position requires a consultative sales approach focused on understanding building infrastructure challenges and applying best-fit BMS building technologies. Travel is required for on-site evaluations and client engagement.Here's what you'll do: • Quickly evaluate existing systems in data centers and commercial/industrial facilities (BMS/controls, electrical, lighting, HVAC, mechanical,) and propose tailored BMS solutions that optimize performance, energy usage, cost of construction, occupant comfort, and probable utility incentive benefits., • Conduct site audits and assessments to understand facility needs and identify solution opportunities., • Create and revise solution scopes to meet ROI, payback, and performance targets., • Present solution strategies and value-based proposals to decision-makers, facility managers, and engineers., • Lead and manage the full sales cycle to achieve annual quota from building and managing pipeline to developing opportunities through deal closure, including contract negotiations., • Create and maintain a territory-specific sales plan with defined targets and growth strategies., • Utilize business and financial knowledge to develop compelling value propositions that align with client goals., • Coordinate internal stakeholders in crafting customized deal structures and solution positioning., • Qualify inbound and outbound opportunities and manage demand generation efforts., • Engage in high-level executive conversations to understand business priorities, financial drivers, and strategic objectives., • Navigate complex accounts with multiple sites, global footprints, or high operational complexity., • Share best practices across the sales organization and support coaching of fellow sales executives., • Collaborate with utility providers and internal teams to qualify projects for available energy incentives and rebates., • Drive favorable solution specifications and influence smart building standards with consultants and design engineers., • Coordinate with solution engineers and project delivery teams to ensure project feasibility, profitability, and execution success., • Develop and maintain strong relationships with key stakeholders including end users, contractors, and engineering firms., • Travel for client-facing meetings, site visits, and presentations (estimated 40–50%).Qualifications:, • 5+ years of complex solution selling experience in building automation, energy efficiency, and critical facility/data center environments., • Demonstrated success in developing and closing BMS, automation, or facility performance projects of $5M or more., • Experience working with engineers, contractors, and utility incentive programs., • Knowledge and experience with OEM building control platforms, automation architecture, and integration strategies., • Proficiency with Microsoft Office Suite, Salesforce (or comparable CRM tools) preferred.Skills of the job:, • Strong knowledge of mechanical and electrical systems, building controls, and integration platforms., • Strong consultative selling and client relationship management skills., • Ability to translate technical information into compelling business value propositions., • Detail-oriented with strong organizational and time-management skills., • Confident, coachable, and proactive with a growth mindset., • Excellent verbal and written communication skills.

Job Description THE ROLE: The Drafter/Designer will collaborate with the responsible Engineer, coordinate the collection of data, and incorporate this information into layouts, drawings, schematics, etc., that are utilized in the manufacturing of turbomachinery components and assemblies. The collection of data includes component dimensional inspection, utilizing inspections performed by others, along with customer supplied machinery data, and related data supplied by the Engineer. On larger projects, the Drafter/Designer is responsible for developing the final design configuration and dimensions, working with the Engineer, by creating a layout, while updating and maintaining the layout throughout the project. The Drafter/Designer transforms the final product designs using computer aided design (CAD) into working engineering documents to be used in the execution of projects. This includes drawings, bills of material (BOM), sketches, and instructions. The Drafter/Designer will mentor and convey proper layout and detail drawing techniques to more junior CAD Designers for department and employee development. Drafting personnel are a cross-functional team to support the overall engineering team, as needed, and will participate in collaboration with other Drafting, Engineering, Project Management, Shop personnel, and the company as a whole. The Drafter/Designer represents the organization with customers as required. This position has no supervisory responsibilities. PRIMARY ROLE RESPONSBILITIES: • Performs dimensional inspections., • Creates CAD design layouts for projects and other company assignments., • Creates CAD drawings for projects and other company assignments., • Inputs and maintains required drafting related project information in company MRP system (currently JobBoss). This includes Bills of Materials (BOM)., • Maintains project drafting files, which include dimensions and other data used in the creation of layouts and drawings., • Works closely with Engineering, the Shop, and Purchasing to ensure that the drawings convey the correct information and are error free., • Provides mentorship, support, and leadership abilities to other drafters in a professional manner., • Visits customer sites for on-site inspections, data gathering, and customer meetings., • Experience in Turbomachinery or related machinery., • Ability to analyze components and assemblies to meet design goals and established criteria., • Experience in design for manufacturability and assembly., • Ability to use industry standard CAD systems for design and documentation (i.e. SolidWorks, AutoCAD)., • Geometric Dimensioning and Tolerancing per ASME Y14.5., • Minimum of 3 years of mechanical design experience., • This position will be based full time in RMS PLW Facility, in Pearland, TX., • Travel time is expected to be 0 - 5%., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends may be required based on engineering or project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability to professionally handle stressful situations., • Able to understand, read, write and speak English., • Ability to lift 30 pounds, • Authorized to work in the United States, • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS: Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 55+ locations and growing! Atwell, LLC is a proud recipient of the following 2024 awards: • Nine consecutive years in a row as a "Best Place to Work" (#16) by Zweig Group, • Recognized as #10 in the "Top 100 Fastest Growing AEC Firms" in the U.S. by Zweig Group, • Recognized as #71 in the ENR Top 500 Design Firms, ranked in every region., • Recognized in Crains "Fast 50" as one of the fastest-growing firms based in Michigan., • Recognized in Crains Magazine as one of Michigan's largest privately held companies. Position Snapshot Atwell is seeking a Structural Designer with experience in the Oil and Gas industry. Current projects include oil and natural gas, CO₂, hydrogen, and renewable natural gas (RNG) pipelines and related facilities. As a Structural Designer at Atwell, you will be responsible for executing and coordinating structural design efforts with a strong understanding of project scope, schedule, key milestones, deliverables, and allocated design hours. You will ensure that all work adheres to Atwell's quality standards, client specifications, and applicable industry codes while supporting the design process from concept through construction documentation. This role will primarily involve the design of industrial ductwork, reinforced concrete structures, and structural steel components for pipeline and facility projects. Proficiency with Autodesk Inventor is strongly preferred, along with experience producing detailed construction drawings for industrial and midstream energy infrastructure. Roles and Responsibilities • Interpret and implement structural design input from the Lead Structural Engineer for oil and gas facilities, including pipelines, compressor stations, terminals, and processing plants, • Develop detailed construction documents, including structural plans, sections, and connection details for steel and concrete structures commonly used in oil and gas infrastructure, • Revise drawings based on redlines and ensure all affected sheets and disciplines are properly coordinated and updated, • Perform periodic field visits to verify existing conditions, collect structural framing measurements, and support as-built documentation, • Effectively manage multiple projects concurrently, maintaining high-quality deliverables and meeting established deadlines, • Associate's degree in Mechanical or Structural Drafting & Design Technology, or a related field (preferred), • Strong understanding of construction drawings and structural plan sets, particularly for oil and gas facilities such as pipelines, terminals, and process plants, • Proficiency in Autodesk Inventor (versions 2021, 2022, or 2023) is required, • Minimum of 3 years of experience using AutoCAD and/or CADWorx for industrial structural or piping design, • Ability to perform under tight deadlines and manage multiple priorities in a fast-paced project environment, • Proficient in Microsoft Office products, including Word, Excel, and Outlook #LI-TK1 Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment up to $25K, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals up to $5,000, • Annual Wellness Reimbursement up to $500 for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job Description About our Company We proudly serve the Kingwood community as the largest independently owned body and mechanical repair facility in the area. Our success is driven by dedicated employees, strong leadership, and a commitment to excellence. We are seeking an experienced professional to oversee our financial operations and human resources functions. Position Summary The Controller / HR Manager is responsible for managing the company’s accounting operations, financial reporting, payroll, and human resources administration. This role plays a key part in supporting leadership, ensuring compliance, and maintaining a positive workplace culture. Accounting & Finance Oversee day-to-day accounting operations including AP, AR, and general ledger Prepare monthly financial statements and management reports Manage payroll processing and payroll reporting Maintain budgets, cash flow tracking, and financial forecasting Coordinate with external accountants and tax professionals Ensure compliance with state and federal regulations Human Resources Administer employee onboarding and offboarding processes Maintain personnel files and HR documentation Manage benefits enrollment, changes, and employee questions Support recruiting, hiring, and employee relations Assist leadership with performance management and policy implementation Ensure compliance with labor laws and HR best practice Requirements Previous experience in accounting, controller, or finance role required HR management experience strongly preferred Knowledge of payroll, benefits administration, and employment compliance Strong organizational, analytical, and communication skills Experience with accounting software and Microsoft Office Automotive or multi-location business experience is a plus High level of confidentiality and professionalism Benefits Competitive salary based on experience Stable leadership role within an established company Supportive, family-owned environment Opportunity to directly impact company growth and culture

Job DescriptionJob Summary The PDM Field Engineer I is based at a jobsite and is responsible for facilitating the interface between the jobsite and the home office engineering staff. When not assigned to a jobsite, the PDM Field Project Engineer I will be assigned to a Matrix engineering office to perform design and project engineering tasks in support of current projects. Essential Functions • Actively supports the Company’s commitment to safety and its “Core Values”., • Represents the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics”., • Assists the construction team with the interpretation of engineering drawings, specifications, and other technical documents., • Communicates and transfers engineering data to aid field staff and craft., • Communicates and transfers field issues to engineering group to improve engineering deliverables for efficient fabrication, erection, installation and testing of pressure vessels, storage tanks, piping and equipment., • Participates in constructability and model reviews., • Documents and assists in the resolution of technical issues that arise at the jobsite., • Supports construction with RFI’s from the Field to Engineering and assists in maintaining the RFI log., • Observes the work being performed and coordinates with Engineering to address any deviations from the drawings and specifications., • Assists the material receipt personnel by performing receipt inspections including coordination of non-conformance resolution with the cognizant Engineers and Procurement for incoming engineered equipment and components., • Facilitates Engineering’s review of rigging plans., • Supports with pre-commissioning and commissioning activities., • Supports in conducting and documenting facility performance tests when within the project scope., • Supports the construction superintendent regarding construction planning requiring engineering interface., • Coordinates site visit timing and requirements for engineering discipline EORs observations and sign-off., • Works on special projects as assigned and directed by supervisor, the project engineer, or by the construction team., • Travels to meetings with customers and vendors as required., • Performs other responsibilities as required or assigned.Qualifications, • Bachelor’s degree in Mechanical, Chemical, Civil/Structural, Electrical or other related discipline required., • Entry-level Engineer; no experience required but field experience on construction project sites highly preferred., • Strong communication skills, both written and oral, and good organizational skills., • Ability to perform with minimal supervision., • Ability to work on multiple activities at one time., • Strong computer skills, including PowerPoint, Excel, and Word are required., • Travel Requirements - assignments will be field positions at construction sites throughout North America with periodic stints in an office including a potential initial office assignment to learn the Matrix way. Full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance. At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets Employer We are an Equal Opportunity. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category. Applicants must be currently authorized to work in the United States on a full-time basis.