Trabajos flash en Orlando, FloridaCrear alertas

Job Description Owen Electric Company Safety Manager: The Electrical Safety Manager will provide the safety support needed to help identify gaps in Electrical Safety Program. They will help implement safety controls associated with electrical work hazards, including field review/validation, process development of electrical work hazardous guidelines and in field safety observations. They will also review safety lock-out/tagout procedure verification and personal protective equipment for associated electrical work scopes to help classify/prevent hazards related to electrocution, electric shock, burns or electrical fires. Consultation will also be expected on electrical safety issues and the use of standards including but not limited to OSHA, NEC (NFPA 70), NFPA 70E, and EM-385. Responsibilities: • • Support company Environmental Health and Safety (EHS) program., • • Maintain Subject Matter Expert (SME) level knowledge of NFPA 70E, electrical safety, and act as company SME for electrical safety and NFPA 70E compliance, • • Attend weekly Jobsite coordination meetings and discuss any safety issues as necessary., • • Assist with Pre-job assessments as needed for major electrical projects., • • Answer electrical safety questions and perform program presentations., • • Maintain the company's electrical safety procedure(s) to maintain compliance with regulations., • • Coordinate and conduct safety trainings, including new hire safety orientations., • • Conduct electrical training as needed to maintain level of knowledge for electrical workers., • • Conduct audits and reviews of electrical equipment, installations, and facilities to verify compliance with NFPA 70E, OSHA, and NEC., • • Develop and maintain electrical safety training for basic and advanced qualified electrical workers., • • Conduct job site safety audits on required daily/weekly safety tasks., • • Build and maintain safety training spreadsheets., • • Conduct job site safety inspections and create safety reports., • • Conduct safety audits on personnel, tools, equipment, material, exc., • • Conduct Lockout / Tag out reviews as requested., • • Conduct Safe Work Practices reviews., • • Act as Safety liaison and promote company safety efforts and safety incentive programs., • • Lead or assist with conducting general safety audits and near miss, incident, and accident investigations as needed., • • Enforce safe work practices that exceed OSHA minimum standards, enforce company rules and policies, enforce site-specific safety requirements, and enforces company disciplinary policy., • • Provide professional development for Safety Team as needed., • • Perform other assigned safety functions as required., • Work as part of a project team to provide deliverables and meet deadlines. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Subject Matter Expert (SME) level knowledge in electrical safety and NFPA 70E, • Possess a thorough understanding of Arc Flash Analysis protocols and concepts., • Have experience in Electrical Safety and knowledge of associated safety standards (OSHA, NFPA 70E)., • High voltage and low voltage electrical safety experience required., • Journeyman Electrician strongly preferred; With a minimum of 10 years electrical experience., • Bachelor's Degree in Engineering or Construction Management strongly preferred; High school diploma required., • OSHA-30 certification, CPR, First-Aid, Arc Flash (NFPA 70e) certification, Fall Protection and trench & excavation certified., • Microsoft Office Suite experience required - Word, Excel, Outlook Ability to work accurately and methodically under pressure and strict deadlines., • Ability to read, write, use a computer, analyze, and interpret OSHA standards. Ability to write reports using PlanGrid, safety correspondence, and site-specific safety plans., • Ability to effectively present information and respond to questions from groups of workers, supervisors, managers, and customers., • Fluency in both English and Spanish preferred, • Strong demonstrable communication style and interpersonal skills, particularly the ability to influence and negotiate both internally and externally with an open and inclusive style., • Excellent time and cost management skills in order to plan and achieve delivery to the desired quality to exceed customer expectations., • Leadership skills as well as the ability to work well within a team of other professionals., • Ability to understand and interpret system one-line drawings and operation of electrical equipment and testing devices., • Ability to work within a high-performance, cross-functional organization with extremely tight timelines and aggressive goals., • Travel: Up to 50% travel., • Must be safety conscious, detailed orientated, highly organized, and the ability to multitask., • Must have the ability to train, influence and motivate team members., • Must have acceptable current driver’s license., • Must have equipment operator experience. • Must have basic equipment maintenance knowledge., • Must have a valid Drivers License and clean driving record Work Availability: • Must maintain regular and acceptable attendance at such level as is determined by management., • Must be available and willing to work such weekends and holidays as the employer determines are necessary or desirable to meet its business needs., • Must be able to attend site-specific power utility shutdowns. Minimum Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Standing, sitting, walking, talking, hearing., • Climb stairs and/or ladders, use hands and fingers to handle, or feel., • Reach with arms and hands; climb or balance; and stoop, kneel, crouch, or crawl., • Occasionally lift and/or move up to 75 pounds., • Working conditions may be indoor and/or outdoor., • Working conditions may be hot or cold., • Noise level may be moderate at times., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus Owen Offers a Comprehensive Benefits Package!!! Company DescriptionFocusing on commercial and industrial construction along with superior service, the company has consistently delivered quality workmanship and outstanding service. Owen Electric Company has a reputation for industry excellence and keeping our promises, this has helped to retain a loyal employee and customer base. Join the OEC team and discover one of the fastest growing electrical contractors in the Southeast! We seek to hire the very best people in our industry. Our goal is for all our employees to find the work fulfilling and rewarding.Focusing on commercial and industrial construction along with superior service, the company has consistently delivered quality workmanship and outstanding service. Owen Electric Company has a reputation for industry excellence and keeping our promises, this has helped to retain a loyal employee and customer base. \r\n\r\nJoin the OEC team and discover one of the fastest growing electrical contractors in the Southeast! We seek to hire the very best people in our industry. Our goal is for all our employees to find the work fulfilling and rewarding.

Job DescriptionAbout us: MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Washington State, Washington D.C., Hamburg, Germany and Orlando, Florida, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing FMCW and MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. To strengthen our team at the Orlando location, we are looking for a Staff Mechanical Engineer – Precision Mechanical Design. As a key member of MicroVision's Mechanical Design Engineering team, you will collaborate with various technical teams in the company to design and take into production market defining Automotive LiDAR product. Summary: In this role you will support the design and development of next‑generation electro‑optical sensor products. This role is responsible for owning mechanical designs from early concept and architecture definition through detailed design, system integration, and release, ensuring solutions meet performance, cost, manufacturability, and quality requirements. The engineer in this role will design and own precision mechanical components and assemblies within a highly integrated, multidisciplinary system. This position emphasizes hands‑on mechanical design, strong documentation rigor, tolerance control, and close collaboration with electrical, optical, systems, manufacturing, and program teams throughout the product development process. This position is expected to provide mechanical technical oversight, guiding architecture decisions, trade studies, and design rigor across the product. In this role you will: • Design and own precision mechanical solutions for advanced electro‑optical sensor products, • Translate system‑level requirements into robust mechanical architectures and detailed designs, • Balance performance, cost, reliability, and manufacturability through disciplined engineering practices, • Enable smooth system integration through strong interface definition and cross‑functional execution, • Drive mechanical design rigor across documentation, change management, and risk mitigation, • Contribute to the realization of new technology through concept development and iterative design Your responsibilities: · Lead design and development of precision mechanical components and assemblies for electro‑optical sensor systems· Drive early concept and architecture development, including trade studies, layout exploration, and mechanism concepts· Create and maintain 3D models, detailed drawings, and GD&T to support robust, repeatable designs· Perform tolerance analysis and support design decisions related to form, fit, and function· Own and manage Bills of Material (BOMs), part structures, and configuration control within a formal PDM/PLM environment· Lead and execute Engineering Change Requests (ECRs) and Engineering Change Orders (ECOs), including technical impact assessment across disciplines· Apply structured problem‑solving methodologies (e.g., 8D) to resolve design, manufacturing, or quality issues· Develop and maintain Design Failure Modes and Effects Analyses (DFMEAs) to identify and mitigate mechanical risks· Drive Design‑to‑Cost, Value Engineering, and Value‑Add initiatives across mechanical designs and supplier components· Collaborate closely with manufacturing engineering, program management, electrical, optical, and systems teams to ensure alignment on requirements, interfaces, and system performance· Coordinate technical engagement with suppliers and contract manufacturers to support mechanical design, fabrication, and process development· Lead internal design and program reviews, contributing mechanical input to cross‑functional technical decisions Our requirements: • 10–15+ years of mechanical engineering experience in precision or complex hardware products, • Strong foundation in mechanical design, drafting, and GD&T (SolidWorks), • Demonstrated experience owning mechanical designs from concept through release, • Knowledge of designing precision components for injection molding, machining, die casting, and metal injection molding (MIM) processes, with an understanding of material selection and manufacturability tradeoffs, • Hands‑on experience managing BOMs, configuration control, and formal change management processes (ECO/ECR) through PLM system (Arena), • Practical application of structured problem‑solving methodologies such as 8D or equivalent, • Experience developing and maintaining DFMEAs, • Familiarity with Design‑to‑Cost and Value Engineering approaches, • Strong cross‑functional communication skills, with experience working across mechanical, manufacturing, electrical, optical, and systems engineering teams Preferred Qualifications • Experience serving as mechanical lead or subsystem owner on a hardware product, • Background in precision electro‑mechanical or opto‑mechanical systems, • Experience supporting products across concept, development, validation, and release phases, • Exposure to supplier‑driven design optimization or cost reduction initiatives, • Experience working in a regulated industry such as automotive, defense, aerospace, or safety‑critical products, including adherence to structured development and documentation processes MicroVision offers a flexible work schedule that could include a hybrid schedule of onsite and remote work, subject to team and business needs. Individual work schedules will be at the discretion of management and dependent on role and business needs. You must live and reside within commuting distance from MicroVision’s office in Orlando, FL. We are not able to provide visa sponsorship for this position. You must be able to work in the U.S. without sponsorship. Benefits: MicroVision is proud to offer a comprehensive benefit program including: • Competitive compensation and equity program, • Choice between an HSA Medical plan with 100% employer-paid premiums for employees and generous contributions or a Buy-Up PPO Medical plan, • Buy-Up PPO Dental plan 100% employer-paid for employees, • Vision coverage 100% employer-paid for employees, • 401(k) plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay), • Generous time off package including a flexible vacation program as well as incidental personal/sick days and standard holidays, • Supplemental pay for Parental Leave, • Company-paid basic life and AD&D insurance and long-term disability MicroVision is committed to a diverse and inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at www.microvision.com to learn more about our company.

Job Description About us: MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Washington State, Washington D.C., Hamburg, Germany and Orlando, Florida, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing FMCW and MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. To strengthen our team at the Orlando location, we are looking for a Staff Optical Engineer. As a key member of MicroVision's Optical Systems Engineering team, you will collaborate with various technical teams in the company to design and take into production market defining Automotive LiDAR product. Summary: In this role you will support the design, analysis, and realization of advanced LiDAR optical architectures. This role blends optical component ownership with significant interaction at the optical system level, supporting new product development from concept through early build phases. The engineer in this position will be responsible for defining optical component requirements, performing detailed analysis, and working directly with global optical suppliers to ensure designs meet performance, manufacturability, and quality expectations. This role emphasizes strong technical ownership, hands‑on validation, and close collaboration across optical, opto‑mechanical, mechanical, and electrical engineering teams. Objectives of This Role: • Own optical component and subsystem definitions within LiDAR architectures, • Translate system‑level performance needs into clear optical requirements and specifications, • Ensure optical designs are robust, tolerant, and manufacturable, • Serve as a technical interface between internal teams and external optical suppliers Your responsibilities: • Design and analyze optical components and subsystems using Zemax (OpticStudio), • Perform optical system analysis, including performance trade studies and sensitivity assessments, • Conduct FRED based non sequential and stray light analysis, • Perform optical tolerance analysis to assess alignment and manufacturing sensitivities, • Support lens design, optimization, and performance evaluation, • Define and document lens requirements, coatings and optical specifications, • Develop and execute optical lab setups for model validation and hardware characterization, • Work closely with global optical suppliers to review designs, specifications, and manufacturing approaches, • Provide technical guidance and review of optical designs and analyses across programs, ensuring consistency, rigor, and best‑practice application, • Collaborate with opto-mechanical engineers to define alignment strategies and tolerances, • Support documentation, reviews, and technical decision making throughout development phases Our requirements:, • 7–15+ years of industry experience in optical engineering with a Bachelor’s of Science degree in Optics, Physics or related field., • Strong proficiency with Zemax (OpticStudio) for modeling, optimization, and tolerance analysis, • Hands‑on experience with lens design and optical component development, • Demonstrated ability to perform optical system‑level analysis, • Experience defining optical requirements and specifications, • Hands-on experience developing and analyzing solutions using MATLAB, Python, or similar programming tools, • Experience defining and reviewing optical coating specifications, • Hands‑on experience designing and executing optical lab setups, • Experience working with global suppliers on optical components, • Ability to work across modeling, lab validation, and design iteration cycles Preferred Qualifications • Experience using FRED for stray light and non‑sequential optical analysis, • Experience with laser‑based optical systems, • Background in LiDAR, imaging systems, or active optical sensors, • Familiarity with opto‑mechanical integration and alignment methods, • Experience supporting new product development or early production builds, • Experience interacting directly with optical vendors during development cycles, • MS or PhD in Optical Engineering MicroVision offers a flexible work schedule that could include a hybrid schedule of onsite and remote work, subject to team and business needs. Individual work schedules will be at the discretion of management and dependent on role and business needs. You must live and reside within commuting distance from MicroVision’s office in Orlando, FL. We are not able to provide visa sponsorship for this position. You must be able to work in the U.S. without sponsorship. Benefits: MicroVision is proud to offer a comprehensive benefit program including: • Competitive compensation and equity program, • Choice between an HSA Medical plan with 100% employer-paid premiums for employees and generous contributions or a Buy-Up PPO Medical plan, • Buy-Up PPO Dental plan 100% employer-paid for employees, • Vision coverage 100% employer-paid for employees, • 401(k) plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay), • Generous time off package including a flexible vacation program as well as incidental personal/sick days and standard holidays, • Supplemental pay for Parental Leave, • Company-paid basic life and AD&D insurance and long-term disability MicroVision is committed to a diverse and inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at www.microvision.com to learn more about our company.

Job DescriptionSalary: About X Studios: X Studios is an award-winning, creative + technology studio crafting digital experiences for brands around the world Specializing in interactives, gaming, mobile & platform design, Virtual Reality, Augmented Reality, and experiential & custom fabrication. Our flexible, fun, and transparent approach has allowed us to work with well known brands like Universal Parks & Resorts, Disney, Red Bull, Lady Gaga, EA Sports, and so many more... Be a part of an exciting company with many perks and a ton of growth potential. Job Summary: Web became our bread and butter when we started back with Adobe Flash website creation (RIP). The times have changed dramatically, and we have remained on the cutting edge of web development ever since. Many of our web-based projects remain evergreen with Content Management Systems (CMS) concept design, API integration, micro-service creation, development testing, and full site launches, our Web Team is at the forefront of creating these projects. Our Engineers are generally comfortable with code in a variety of environments. As a successful Django/Python Engineer, you guessed it, your focus will be on the Django backend system, API integration, and testing have experience working on more complex websites and applications with minimal oversight. Be a self-driven problem-solving genius with design technology solutions and execute with thoughtfulness and quality. Curiosity, tenacity, and resourcefulness are common qualities. If you think you fit this mold and are excited about working on projects for a variety of companies, send us code samples, a GitHub profile, or other relevant links/portfolio for review. Job Responsibilities: • Use server-side languages such as Django and Python to develop websites, web applications, and Content Management Systems (CMS), • Connect to third-party APIs using REST implementations, • Develop requirements and planning documentation, • Maintain well-documented, reusable, and transferrable code, • Maintain working knowledge of Content Management in Django, • Create and manage DigitalOcean Droplet instances, • Frequently commit code repositories (with release notes) within BitBucket, • Proactively perform cross-browser testing and optimizations, • Tracking of hours, tasks, and milestones in project management software, • Perform other duties as assigned. X Studios Team Benefits: • A very competitive contracted (with potential for full-time) position, • Free Weekly Lunches We believe transparency is key at X Studios, so we invite all prospective applicants to review our Team Handbook, available publicly online, at https://handbook.xstudios.com. Compensation & Salary: • Base hourly plus performance bonuses (if applicable) Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily: • The requirements listed below are representative of the knowledge, skill, and/or ability required., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Consistent attendance is a job requirement. Education & Experience: • 2-4 years professional development experience, • Expert knowledge of PHP, C#, and/or Python, • Expert knowledge of at least one major frontend framework (i.e. React, Vue), • Expert knowledge of client-side optimization techniques, • Expert understanding of the latest and legacy browser capabilities, including mobile, • Fluent understanding of object-oriented programming techniques, • Functional knowledge of content management and eCommerce solutions such as Django, • Strong experience with version control systems (i.e. BitBucket), • Functional knowledge of Linux, Nginx, and Apache, • Familiarity with UNIX terminal commands, • Knowledge of Docker framework, DigitalOcean droplets knowledge is bonus points, • Previous experience as a web developer, • Tough skin and excellent time management skills, • Strong oral and written communication skills with both teams and clients Note: You must be a US citizen or have a work permit to work in the US. The position requires the ability to work from our Winter Park, FL office. Relocation services may apply, inquire during your interview. Due to the overwhelming responses, only candidates selected for an interview will be contacted; no unsolicited phone calls or e-mails, in addition to no staffing or placement agencies.

Job Description About us: With offices in the U.S. and Germany, MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Florida, Washington State, Washington D.C., and Hamburg, Germany, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. Job Summary: MicroVision has an immediate opportunity for a Senior RTL Engineer. As a key member of MicroVision's growing Digital Design Engineering team, you will collaborate with various technical teams in the company to design and take into production, market defining Automotive LiDAR product. The right candidate for this position will be a highly motivated FPGA/RTL Engineer with a breadth of understanding in FPGA design and best practices, including detailed design, System Verilog coding, modelling, simulation, verification, integration and test. Essential Duties and Responsibilities: Derive FPGA requirements based on system requirements then create FPGA architecture to fulfill those requirements Design, implement and test Register-Transfer Level (RTL) features and components guided by system architecture and requirements Own the detailed design of assigned firmware components and subsystem functionality Document test and implementation plans at unit at system levels and then execute on it. Work with other teams to integrate developed features into system hardware. Support bringing up RTL features developed by the team. Coach/mentor junior members of RTL and integration teams to complete tasks. Participate in the full software development life cycle (SDLC) flow including peer reviews of requirements, architecture, design, and code implementations within an approved ASPICE development flow. Required Knowledge, Skills and Abilities: Knowledge of System Verilog, Verilog, Python programming languages Proficient in FPGA Design methodologies from state machine design to DSP implementation Experienced in closing timing in FPGA designs. Mapping algorithms to FPGA appropriate logic implementations Expert integrating and bringing up features in hardware. Ability to work well in a fast-moving and complex environment. Independently driven to complete project tasks Experience with Configuration Management and Change Control concepts and tools (Git, Subversion, Jira, etc.) Experience working with Functional Requirements and defining Requirement Based Tests Experience performing HDL Synthesis/Simulation (eg. VCS, Synplicity, etc.) Experience with design analyses (Timing, Lint, Clock Domain Crossings, Code Coverage, etc.) and IP compliance strategies Experience designing portable, scalable Test Benches Experience with UVM/OVM - Constrained random testing Familiarity with hierarchical simulation and verification frameworks Experience with intersystem communication protocols (I2C, UART, SPI, etc.) Familiarity with microcontroller peripherals including one or more of the following: ADCs, DACs, Flash, EEPROM, timers and watchdogs Working knowledge of data structures and algorithm fundamentals Working knowledge of digital and analog electronics Preferred Knowledge, Skills, and Abilities Knowledgeable of control systems and digital signal processing fundamentals Proficient in other embedded software systems developed in C / Cpp / etc. Hands on experience with High-Level Synthesis (HLS) Excellent scripting and automation skills. Bash shell, python, Make/CMake, and TCL desired Extensive project experience working on embedded laser applications including Lidar Safety-critical industry experience. (FIT analysis, etc.) Working knowledge of various computing architectures beyond FPGAs, such as DSPs, GPUs, or MCUs, and their associated hardware computing platforms used to program them Experience with ASIC design & migration from FPGA prototypes to production ASICs Required Education and Experience: BS in Electrical Engineering or related field and 5+ years of experience or equivalent combination of education and experience MicroVision offers flexible work schedule that could include a hybrid schedule of onsite and remote work subject to team and business needs. You must live and reside within commuting distance from MicroVision's office in Orlando, FL. We are not able to provide visa sponsorship for this position. You must be able to work in the US without sponsorship. Benefits: MicroVision is also proud to offer a comprehensive benefit program including: Competitive compensation and equity program Choice between an HSA Medical plan or a Buy-Up PPO Medical plan Dental plan 100% employer-paid for employees Vision coverage Vision coverage 100% employer-paid for employees 401k plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay) Generous time off package including a flexible vacation program as well as incidental personal/sick days and floating holidays Supplemental pay for Parental Leave Company-paid basic life and AD&D insurance and long-term disability. MicroVision is committed to an inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at www.microvision.com to learn more about our company.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Facilities Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects. In this role, you’ll lead projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Client Collaboration: Build and maintain strong relationships with clients. Understand their goals and expectations to deliver solutions that exceed requirements and build long-term trust. Skills, Education & Experience • Bachelor’s of Science or Technology degree in electrical engineering., • Licensed Professional Engineer (PE)., • Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects., • Proficiency in AutoCAD and Revit., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis., • Proficiency with the National Electric Code., • Experience with the layout and design of medium and low voltage distribution systems., • Experience with the layout and design of lighting systems and controls., • Strong communication and interpersonal skills, with the ability to lead teams and collaborate effectively with clients and stakeholders Compensation and Benefits: • Estimated Salary Range: $95,472 - $130,640/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Leading multi-disciplinary team is looking for a Senior Electrical Engineer for their Orlando team! Responsibilities: • Project/client management, • Oversee electrical design execution for a variety of project types (Healthcare, Sports, Commercial, Public Sector, Industrial, Education, and/or Institutional projects, • Plan/manage design process with department managers, • Supervise staff/perform following duties:, • Perform analysis, design and documentation for power distribution, lighting systems and backup power systems, • Coordinate project with specialists for fire alarm, technology and lighting design, • Coordinate with other internal teams/disciplines for equipment power needs and sizing electrical distribution, • Perform electrical design calculations (electrical loads/panel schedules), • Develop electrical systems diagrams (one-line), • Select/schedule electrical equipment, • Meet with vendors to determine specifications then edit as needed, • Prepare design deliverables for SD, DD, CD level documents, • Assist with budgeting by providing cost opinions, • Review contractors change orders, • Perform construction administrative duties including RFI responses and review of contractor change orders, • Ensure designs adhere to QA/QC standards, • Attend meetings (clients, local jurisdictions), • Work with contractors to resolve construction issues, • Assist with business development including participation in various trade organizations, • Manage multiple projects simultaneously Requirements: • Bachelor’s degree in Electrical Engineering preferred, • 8+ years of electrical design/project management consulting experience, • Experience with electrical system studies (short circuit, over-current device coordination and Arc Flash Hazard analysis per NPFA 70E), • Experience/knowledge of National Electrical Code (NEC), State Energy Code, NFPA guidelines, and FGI guidelines, • PE License preferred, • Working knowledge of design/analysis software (Revit, AutoCAD, SKM, ETAP and Easy power), • Knowledge of standard construction practices Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Job Description About us: MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Washington State, Washington D.C., Hamburg, Germany and Orlando, Florida, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing FMCW and MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. To strengthen our team at the Orlando location, we are looking for a Sr. Staff Electrical Engineer. As a key member of MicroVision's Hardware Design Engineering team, you will collaborate with various technical teams in the company to design and take into production market defining Automotive LiDAR product. Summary: In this role you will be a technical leader responsible for driving the full product development lifecycle of highly complex circuit boards and subsystems for automotive LiDAR systems. This role owns critical electrical architecture decisions, leads complex technical efforts across multiple programs, and sets best practices for hardware development, validation, and sustainment. The Staff Electrical Engineer is expected to operate with a high degree of autonomy, provide deep technical mentorship, proactively identify and mitigate risk, and serve as a go-to expert for board-level electrical design and system integration. This position works closely with cross-functional and external partners to ensure delivery of robust, scalable, and production-ready hardware solutions. Your responsibilities: • Lead the electrical architecture, design, and development of complex circuit boards and electrical subsystems for automotive LiDAR products from concept through production and sustainment, • Own system-level and board-level design decisions, including partitioning, interfaces, power architecture, and tradeoff analysis across performance, cost, reliability, and manufacturability, • Serve as a technical authority for mixed-signal, power, control, and high-speed interface circuits, • Provide technical leadership across multiple programs or product variants, ensuring consistency, reuse, and continuous improvement of electrical designs, • Lead cross-functional technical discussions with mechanical, firmware, systems, optics, manufacturing, test, quality, and supply chain teams to drive successful product integration, • Drive hardware bring-up, debugging, validation, and characterization at both board and system levels, including complex or ambiguous failure modes, • Define, review, and approve comprehensive test strategies and validation plans to ensure performance, reliability, and compliance requirements are met, • Lead structured root cause investigations for complex design, integration, manufacturing, and field issues; develop and drive corrective and preventive actions, • Champion design for manufacturability (DFM), design for test (DFT), design for reliability (DFR), and cost optimization throughout the product lifecycle, • Conduct and lead thorough schematic, design, and layout reviews, ensuring adherence to electrical best practices including SI/PI, EMI/ESD, grounding, and thermal considerations, • Establish and maintain high-quality technical documentation, including design specifications, architectural descriptions, trade studies, test reports, and release artifacts, • Provide guidance and mentorship to Staff and Senior Engineers, raising the technical bar and promoting hardware development best practices, • Support supplier and contract manufacturer engagement, including technical reviews, yield improvement initiatives, component selection strategy, and obsolescence management, • Actively contribute to technical roadmap planning, risk assessment, and long-term platform strategy Our Required Skills and Qualifications:, • Bachelor’s degree in Electrical Engineering or related field, • 12+ years of experience in electrical hardware development with deep expertise in board-level design and product development, • Demonstrated success leading complex electrical designs through multiple product lifecycles, from early concept through high-volume production and sustainment, • Expert-level experience with schematic capture, circuit analysis, component selection, and PCB development processes, • Advanced hands-on laboratory skills, including complex board bring-up, debugging, root cause analysis, and failure characterization, • Extensive experience designing analog, digital, mixed-signal, and power circuits in high-reliability products, • Deep understanding of hardware development best practices, risk management, design review rigor, and documentation discipline, • Proven ability to independently drive technical direction while influencing and aligning cross-functional teams, • Strong written and verbal communication skills, with the ability to present complex technical concepts to diverse audiences Preferred Qualifications • Master’s degree in Electrical Engineering or related field, • Advanced experience with SI/PI analysis and simulation tools (e.g., HyperLynx or equivalent), • Experience architecting and supporting complex sensing, imaging, or electro‑optical systems, • Expert-level proficiency with Altium Designer for schematic capture and PCB layout collaboration, • Experience with environmental, reliability, EMI/EMC, and regulatory compliance testing, • Strong familiarity with automotive product development processes, functional safety considerations, and relevant standards, • Experience supporting global manufacturing operations, production ramps, and long-term field sustainment, • History of technical mentorship, design ownership, and cross-program leadership MicroVision offers a flexible work schedule that could include a hybrid schedule of onsite and remote work, subject to team and business needs. Individual work schedules will be at the discretion of management and dependent on role and business needs. You must live and reside within commuting distance from MicroVision’s office in Orlando, FL. We are not able to provide visa sponsorship for this position. You must be able to work in the U.S. without sponsorship. Benefits: MicroVision is proud to offer a comprehensive benefit program including: • Competitive compensation and equity program, • Choice between an HSA Medical plan with 100% employer-paid premiums for employees and generous contributions or a Buy-Up PPO Medical plan, • Buy-Up PPO Dental plan 100% employer-paid for employees, • Vision coverage 100% employer-paid for employees, • 401(k) plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay), • Generous time off package including a flexible vacation program as well as incidental personal/sick days and standard holidays, • Supplemental pay for Parental Leave, • Company-paid basic life and AD&D insurance and long-term disability MicroVision is committed to a diverse and inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at www.microvision.com to learn more about our company.

Job DescriptionDescription: Hybrid 3 days onsite in Orlando, FL The organization seeks a Business Analyst & AI Catalyst Consultant to identify and deliver AI-driven process improvements across multiple departments. The role will analyze workflows, size opportunities, and implement custom AI solutions using the Google AI stack with a focus on Gemini. The consultant will manage discovery through deployment, measure outcomes, and drive adoption through clear communication and enablement. Due to client requirements, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k with company matching, and life insurance. Rate: $60.00 to $65.00/hr. w2 Responsibilities: • Conduct stakeholder interviews to understand operations, challenges, and strategic objectives., • Map complex workflows to identify automation and AI augmentation opportunities., • Acclimate to diverse business domains to tailor AI solutions to specific needs and context., • Perform feasibility analysis to determine appropriate AI solution tier and coordinate handoffs to development when required., • Estimate time-to-value, complexity, and ROI for proposed enhancements., • Lead creation of custom AI instances, including system instructions, knowledge bases, and persona/output configuration., • Develop user documentation to support adoption., • Maintain expertise in the Google AI ecosystem, including Gemini 3.x/Flash and Google Workspace integrations., • Collaborate with business units on iterative testing and refinement based on real usage., • Document post-deployment metrics, user experience, and realized time or cost savings., • Communicate AI capabilities, limitations, and value to non-technical audiences., • Create guides, walkthroughs, and training sessions to enable effective use of AI tools. Experience Requirements: • 2+ years in a Business Analyst, Project Coordinator, or similar role in a technical environment., • Working knowledge of Generative AI and LLMs, including differences from traditional software systems., • Strong command of the Google AI technology stack with emphasis on Gemini., • Ability to produce workflow diagrams, BRDs, and process maps., • Advanced prompt engineering skills to achieve targeted business outcomes., • Exceptional listening skills to identify underlying needs., • Clear communication skills for explaining complex AI concepts in accessible language., • Adaptability to shift between business domains and adjust communication style. Education Requirements: • Associate’s Degree in Business, IT, Communications, or a related field. Recruitment Transparency Notice Eliassen Group values transparency in our recruitment practices. Please be advised that Eliassen Group utilizes artificial intelligence (AI) tools as part of its initial application screening and hiring process. You may receive email and SMS notifications from the Eliassen Virtual Recruiting Team (noreply@eliassen.com, 781-808-2924) inviting you to complete a brief voice screening as part of your application process. These tools assist our hiring teams in different ways, including but not limited to, assistance in reviewing application materials to help identify candidates whose qualifications most closely match the requirements of the position. All AI-assisted evaluations and responses are reviewed by human recruiters before any hiring decisions are made. The use of AI in our process is intended to support fairness, efficiency, and consistency, and Eliassen Group takes measures to prevent bias or discrimination in connection with its hiring practices. By proceeding, you acknowledge, agree, and consent to Eliassen Group’s use of these tools, including AI tools, as part of the application and hiring process. Skills, experience, and other compensable factors will be considered when determining pay rate. The pay range provided in this posting reflects a W2 hourly rate; other employment options may be available that may result in pay outside of the provided range. W2 employees of Eliassen Group who are regularly scheduled to work 30 or more hours per week are eligible for the following benefits: medical (choice of 3 plans), dental, vision, pre-tax accounts, other voluntary benefits including life and disability insurance, 401(k) with match, and sick time if required by law in the worked-in state/locality. If anyone reaches out to you about an open position connected with Eliassen Group, please ensure that you are working directly with us by confirming the following: · When you work with Eliassen Group, all email communication will come from an Eliassen.com address, never Gmail, Yahoo, etc. · Eliassen Group will never ask you for personal information (home address, bank account, or check routing number) until you have worked with someone clearly associated with Eliassen Group. If you have any indication of fraudulent activity, please contact fraud@eliassen.com. About Eliassen Group: Eliassen Group is a strategic consulting firm that helps organizations reach further and achieve more through our technology, business advisory, and life sciences solutions. For nearly 40 years, we have combined exceptional people, deep domain expertise, and intelligent capabilities to expand our clients’ capacity and accelerate meaningful outcomes. We are driven by a purpose to positively impact the lives of our employees, clients, consultants, and the communities we serve. Eliassen is committed to building a diverse and inclusive team from a variety of backgrounds, perspectives, and skills. We are an Equal Opportunity and Affirmative Action Employer and all employment decisions are based on merit, performance, and business needs. Eliassen does not discriminate on the basis of race, color, gender identity or expression, sexual preference or orientation, sex (including pregnancy, childbirth, and related medical conditions), marital status, creed, religion, physical or mental disability, genetic information, military or veteran status, age, ancestry, national origin, citizenship status, prohibited criminal record inquiries of applicants and employees, or any other category protected by federal, state, or local laws. Don’t miss out on our referral program! If we hire a candidate that you refer us to then you can be eligible for a $1,000 referral check!

Job Description About us: With offices in the U.S. and Germany, MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Florida, Washington State, Washington D.C., Hamburg, Germany and Orlando, FLorida, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. Job Summary: MicroVision has an immediate opportunity for a Staff RTL Engineer. As a key member of MicroVision's growing Digital Design Engineering team, you will collaborate with various technical teams in the company to design and take into production, market defining Automotive LiDAR product. The right candidate for this position will be a highly motivated FPGA/RTL Engineer with a breadth of understanding in FPGA design and best practices, including detailed design, System Verilog coding, modelling, simulation, verification, integration and test. Essential Duties and Responsibilities: Derive FPGA requirements based on system requirements then create FPGA architecture to fulfill those requirements Design, implement and test Register-Transfer Level (RTL) features and components guided by system architecture and requirements Own the detailed design of assigned firmware components and subsystem functionality Document test and implementation plans at unit at system levels and then execute on it. Work with other teams to integrate developed features into system hardware. Support bringing up RTL features developed by the team. Coach/mentor junior members of RTL and integration teams to complete tasks. Participate in the full software development life cycle (SDLC) flow including peer reviews of requirements, architecture, design, and code implementations within an approved ASPICE development flow. Required Knowledge, Skills and Abilities: Knowledge of System Verilog, Verilog, Python programming languages Proficient in FPGA Design methodologies from state machine design to DSP implementation Experienced in closing timing in FPGA designs. Mapping algorithms to FPGA appropriate logic implementations Expert integrating and bringing up features in hardware. Ability to work well in a fast-moving and complex environment. Independently driven to complete project tasks Experience with Configuration Management and Change Control concepts and tools (Git, Subversion, Jira, etc.) Experience working with Functional Requirements and defining Requirement Based Tests Experience performing HDL Synthesis/Simulation (eg. VCS, Synplicity, etc.) Experience with design analyses (Timing, Lint, Clock Domain Crossings, Code Coverage, etc.) and IP compliance strategies Experience designing portable, scalable Test Benches Experience with UVM/OVM - Constrained random testing Familiarity with hierarchical simulation and verification frameworks Experience with intersystem communication protocols (I2C, UART, SPI, etc.) Familiarity with microcontroller peripherals including one or more of the following: ADCs, DACs, Flash, EEPROM, timers and watchdogs Working knowledge of data structures and algorithm fundamentals Working knowledge of digital and analog electronics Preferred Knowledge, Skills, and Abilities Knowledgeable of control systems and digital signal processing fundamentals Proficient in other embedded software systems developed in C / Cpp / etc. Hands on experience with High-Level Synthesis (HLS) Excellent scripting and automation skills. Bash shell, python, Make/CMake, and TCL desired Extensive project experience working on embedded laser applications including Lidar Safety-critical industry experience. (FIT analysis, etc.) Working knowledge of various computing architectures beyond FPGAs, such as DSPs, GPUs, or MCUs, and their associated hardware computing platforms used to program them Experience with ASIC design & migration from FPGA prototypes to production ASICs Required Education and Experience: BS in Electrical Engineering or related field and 7+ years of experience or equivalent combination of education and experience MicroVision offers flexible work schedule that could include a hybrid schedule of onsite and remote work subject to team and business needs. You must live and reside within commuting distance from MicroVision's office in Orlando, FL. We are not able to provide visa sponsorship for this position. You must be able to work in the US without sponsorship. Benefits: MicroVision is also proud to offer a comprehensive benefit program including: Competitive compensation and equity program Choice between an HSA Medical plan or a Buy-Up PPO Medical plan Dental plan 100% employer-paid for employees Vision coverage Vision coverage 100% employer-paid for employees 401k plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay) Generous time off package including a flexible vacation program as well as incidental personal/sick days and floating holidays Supplemental pay for Parental Leave Company-paid basic life and AD&D insurance and long-term disability. MicroVision is committed to an inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at www.microvision.com to learn more about our company.

Job Description About us: MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Washington State, Washington D.C., Hamburg, Germany and Orlando, Florida, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing FMCW and MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. To strengthen our team at the Orlando location, we are looking for a Staff Electrical Engineer. As a key member of MicroVision's Hardware Design Engineering team, you will collaborate with various technical teams in the company to design and take into production market defining Automotive LiDAR product. Summary: The Staff Electrical Engineer is responsible for supporting the full product development lifecycle of complex circuit boards for automotive LiDAR systems. This role contributes to the design, integration, validation, launch, and sustainment of electrical hardware, working closely with cross functional teams to deliver robust, high-performance products suitable for volume production. The ideal candidate brings strong technical depth in board level electrical design and hands-on problem solving across development and production phases. Your responsibilities: • Lead and support the design and development of circuit boards for automotive LiDAR products, from concept through production release, • Drive board level architecture, schematic development, component selection, and design tradeoff analysis for mixed signal, power, control, and interface circuits, • Collaborate with mechanical, firmware, systems, optics, manufacturing, test, quality, and supply chain teams to ensure successful product integration, • Support bring up, debug, integration, validation, and characterization of hardware in both laboratory and system level environments, • Develop and execute test plans to verify performance, functionality, reliability, and design robustness, • Investigate and resolve design, integration, manufacturing, and field issues through structured root cause analysis and corrective action, • Support design for manufacturability, design for test, and design for reliability throughout the product lifecycle, • Review PCB layouts to ensure proper implementation of electrical requirements, including power integrity, signal integrity, grounding, thermal considerations, and EMI mitigation, • Generate and maintain technical documentation including design specifications, schematics, test reports, engineering change documentation, and release artifacts, • Support product sustainment activities, including component changes, obsolescence management, supplier issues, yield improvement, and continuous product improvement Our Required Skills and Qualifications:, • Bachelor’s degree in Electrical Engineering or related field, • 8+ years of experience in electrical hardware development, with significant experience in board level design and product development, • Strong experience with schematic capture, circuit analysis, component selection, and PCB development processes, • Experience supporting products through multiple phases of the development lifecycle, including design, integration, validation, production, and sustainment, • Strong hands on lab skills, including board bring up, debugging, failure analysis, and use of standard test equipment such as oscilloscopes, power supplies, DMMs, and logic analyzers, • Experience with analog, digital, mixed signal, and power circuit design, • Strong understanding of hardware development best practices, including design reviews, risk reduction, and documentation discipline, • Ability to work effectively across cross functional teams in a fast paced product development environment, • Strong written and verbal communication skills Preferred Qualifications • Master’s degree in Electrical Engineering or related field, • Experience with SI/PI analysis using HyperLynx, • Experience with complex sensing, imaging, or electro optical systems, • Experience with schematic capture and PCB layout using Altium Designer, • Experience with environmental, reliability, or compliance testing, • Familiarity with automotive product development processes, requirements, or standards, • Experience working with contract manufacturers and supporting production ramp and field sustainment MicroVision offers a flexible work schedule that could include a hybrid schedule of onsite and remote work, subject to team and business needs. Individual work schedules will be at the discretion of management and dependent on role and business needs. You must live and reside within commuting distance from MicroVision’s office in Orlando, FL. We are not able to provide visa sponsorship for this position. You must be able to work in the U.S. without sponsorship. Benefits: MicroVision is proud to offer a comprehensive benefit program including: • Competitive compensation and equity program, • Choice between an HSA Medical plan with 100% employer-paid premiums for employees and generous contributions or a Buy-Up PPO Medical plan, • Buy-Up PPO Dental plan 100% employer-paid for employees, • Vision coverage 100% employer-paid for employees, • 401(k) plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay), • Generous time off package including a flexible vacation program as well as incidental personal/sick days and standard holidays, • Supplemental pay for Parental Leave, • Company-paid basic life and AD&D insurance and long-term disability MicroVision is committed to a diverse and inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at www.microvision.com to learn more about our company.

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Senior SCADA/ I&C Professional Engineer to join our Water Team to improve infrastructure across the firm. The candidate must be a licensed PE with a bachelor's degree in civil, electrical, or adjacent engineering degrees and fifteen years or more of related experience. The candidate should have experience working with various projects that may include water/wastewater treatment plants, pump stations, sewer/ combined sewer overflow, collection and conveyance systems, distribution and transmission systems, storm water, hydrologic and hydraulic models and/or other water resource projects. The candidate must also be self-motivated, work well with others, and have excellent writing, organizational, and communication skills. A flexible hybrid-remote work schedule is available after 30 days of employment.Typical responsibilities include: • Lead Wade Trim's SCADA and I&C work in across the discipline., • Support the design, development, installation, and startup of SCADA & PLC-based automation and control systems for water and wastewater treatment plants, pump stations, and facilities., • Extensive experience designing and supporting SCADA systems for water and wastewater treatment facilities., • Proven ability to manage multiple concurrent projects with municipal water/wastewater clients., • Strong coordination skills with multidisciplinary teams, contractors, and utility stakeholders., • Experience supporting construction administration, including RFIs, submittals, field changes, and startup., • Excellent written and verbal communication skills, including the ability to explain complex technical concepts to non-technical users., • Ensure designs comply with applicable codes, standards, and best practices, including ISA-101 and utility-specific HMI/SCADA standards., • Develop and maintain SCADA, PLC, and HMI standards for water and wastewater clients to ensure consistency, usability, and long-term maintainability., • Perform quality control and peer reviews for I&C and electrical design deliverables across multiple projects., • Support development of new SCADA products, templates, and internal tools to improve efficiency and reliability., • Provide technical leadership and mentorship to junior engineers and technicians., • Provide design reviews for I&C and electrical portions of district or firmwide projects., • Support construction services including submittal reviews, RFIs, field inspections, testing, startup support, and change order management., • Leads electrical and instrumentation and control (I&C) design specifications and drawings including one-line diagrams, electrical detail drawings, process and instrumentation drawings (P&IDs), • Develop and assist with electrical designs that include calculations and power distribution for mechanical equipment related to municipal water and wastewater projects, • Experience includes general electrical power distribution and supply design, lighting and receptacle plans, mechanical equipment power plans, panel board schedules, arc flash studies, and back-up power generation design for water and wastewater treatment plants, CSO facilities and pump stations., • Travel to and attend client, staff and project meetings, • Prepare permit applications, • Assist with the preparation of cost estimates, • Review and comment on Contractor submittals, • Assist Project Managers, • Manage business development/sales activities and maintain excellent client relations, • Prepare a summary of qualifications, presentations, and proposals, • Manage financial and technical aspects of multiple projects, • Prepare proposals and presentations, • Conduct on-site inspections as needed, • Prepare project status and other reports, • Attend client, public, project, and staff meetings including client progress, plan review, pre-construction, etc., • Maintain a safe working environmentEducation:, • Bachelor’s Degree in Electrical, Civil, Mechanical Engineering or related degree Skills/Experience:, • Professional Engineering License required, • NCEES eligible preferred, • 15+ years of related Engineering experience About Wade Trim: Wade Trim is committed to maximizing the value of infrastructure investments. We’ve been solving complex engineering challenges for a century. We customize our work approach to fit each project using a collaborative, friendly style to deliver solutions our clients can stand behind. Our supportive culture recognizes and strives to fulfill collective client, company, and individual needs. Mentoring and building skills of Wade Trim staff is a priority. Frequent interaction among staff is encouraged, company leadership is easily accessible, and opportunities are provided for staff to help shape the firm’s future through strategic planning. Work/life balance is supported through a flexible, hybrid work schedule that brings team members together in the office at least three days a week and connects them virtually when working from home. To solve our clients’ toughest challenges, we’ve devoted ourselves to delivering innovative solutions. Our Office of Applied Technology (OAT) is dedicated to seeking new technologies or ways to apply existing technologies to enhance value to our clients and positively impact communities. All staff are encouraged to share ideas and suggestions for innovative technologies or processes to adopt. This open-minded approach enables us to advance technology, foster innovation, and stay ahead of our clients’ needs. Wade Trim’s success is shared by the employees that make it happen. Since our beginning, our firm has been 100% employee owned. This cultivates an ownership mindset that benefits our work approach, collaborative culture, and ability to deliver client solutions. We believe employee ownership drives the sustainability and growth of our firm and provides all our employees with opportunities for financial success. If you are looking for a challenging and rewarding career in a friendly environment, please submit your resume by visiting the Careers section of our website at http://www.wadetrim.com/careers. Wade Trim does not accept unsolicited resumes, candidate profiles, or CVs from third-party recruiters or employment agencies. Any submission made without a valid, signed agreement and an approved engagement request from Wade Trim’s People Services Team will be considered the property of Wade Trim. Wade Trim reserves the right to pursue and hire any candidate submitted through unsolicited means without any financial obligation to the recruiter or agency. A valid agreement can only be signed by the Director of People Services. Resumes or candidate profiles submitted at the request of a Wade Trim employee who is not authorized by the People Services team do not constitute a valid engagement. Recruiters and agencies must have a current, written agreement authorized by the Director of People Services to be considered an approved vendor. Wade Trim is an Affirmative Action/Equal Opportunity Employer.

Job DescriptionDescription: Leverage your paralegal or attorney background in a whole new way. At Synergy, we help trial lawyers protect injury victims by simplifying the post-settlement process—from Medicare compliance to lien resolution. Now, we’re seeking a Key Account Manager who can bring real-world PI or subrogation experience to a dynamic, leadership-oriented role. This isn’t sales. This isn’t onboarding. This is about owning the ongoing relationship with some of our most important clients—high-volume, high-impact personal injury law firms we call Integrated Partners. You'll be their strategic point of contact, overseeing service delivery, resolving escalations, and helping drive continuous improvement across departments. If you're a paralegal or attorney, residing in Central Florida, who's ready to leave the casework grind behind and step into a role where your legal insight drives operational impact—this is your opportunity. Requirements: Who This is For: • A seasoned PI paralegal, former defense subrogation attorney, or lien resolution expert ready to transition into strategic operations, • Someone who can confidently speak the language of attorneys and collaborate across legal, ops, and tech teams, • A natural problem solver who takes pride in smoothing out processes and elevating the client experience What You’ll Do: 1. Serve as the Operational Relationship Owner • Be the primary point of contact for a book of Integrated Clients (high-volume PI law firms), • Facilitate monthly/quarterly meetings and provide insight on trends, concerns, and opportunities, • Proactively manage escalations, feedback loops, and cross-functional coordination 1. Monitor Performance & Advocate for Solutions • Review firm-specific metrics and ensure alignment with service expectations, • Identify root causes of service issues and drive FLASH (our internal resolution system) improvements, • Collaborate with Sales, IT, and Lien Ops to advocate for scalable improvements 1. Ensure Quality and Service Consistency • Conduct file reviews to assess service levels, track trends, and ensure process adherence, • Contribute to leadership meetings, policy development, and internal training materials What You Bring: • Bachelor’s degree required; JD or Paralegal Certification strongly preferred., • 5+ years of experience in personal injury law, healthcare subrogation, lien resolution, or a related field, with proven success managing attorney and client relationships., • Strong legal background preferred, ideally as a paralegal or attorney with exposure to PI, lien resolution, or subrogation., • Exceptional communication skills, both written and verbal, with the ability to lead high-level client meetings and cross-functional internal discussions., • Professional, polished presence with a client-first mindset — skilled at building trust and long-term relationships with demanding firms., • Highly organized and detail-oriented; able to manage multiple clients, deadlines, and competing priorities without sacrificing quality., • Tech-savvy and adaptable, with proficiency in CRM platforms, workflow tools, Microsoft Office Suite, and comfort learning new technologies (including AI)., • Problem-solving mindset with the ability to triage issues, drive resolution, and maintain alignment across teams and clients., • Growth-oriented professional eager to leverage legal expertise in a leadership role focused on client success and strategic relationship management. Why Synergy? We’re not your typical legal support company—we’re a mission-driven, tech-enabled BPO transforming the post-settlement process. Here’s what makes Synergy special: Culture of Collaboration: We’re a tight-knit team that leads with empathy and supports one another to win together Room to Grow: • Leadership development, • Continuing education, • Promotion opportunities for those who raise the bar Benefits that Support Life: • Competitive compensation, • Medical, dental, and vision coverage, • 401(k) with company match, • Generous PTO and paid holidays, • Wellness initiatives and community impact opportunities The Synergy Experience: A chance to contribute to a company that’s changing the game—for our clients, our partners, and the injured individuals they serve. Salary Description: Base + variable performance bonus plan. Year 1 range: $75,000 - $95,000, depending on experience and performance.

Job Description Owen Electric Company Safety Manager: The Electrical Safety Manager will provide the safety support needed to help identify gaps in Electrical Safety Program. They will help implement safety controls associated with electrical work hazards, including field review/validation, process development of electrical work hazardous guidelines and in field safety observations. They will also review safety lock-out/tagout procedure verification and personal protective equipment for associated electrical work scopes to help classify/prevent hazards related to electrocution, electric shock, burns or electrical fires. Consultation will also be expected on electrical safety issues and the use of standards including but not limited to OSHA, NEC (NFPA 70), NFPA 70E, and EM-385. Responsibilities: • • Support company Environmental Health and Safety (EHS) program., • • Maintain Subject Matter Expert (SME) level knowledge of NFPA 70E, electrical safety, and act as company SME for electrical safety and NFPA 70E compliance, • • Attend weekly Jobsite coordination meetings and discuss any safety issues as necessary., • • Assist with Pre-job assessments as needed for major electrical projects., • • Answer electrical safety questions and perform program presentations., • • Maintain the company's electrical safety procedure(s) to maintain compliance with regulations., • • Coordinate and conduct safety trainings, including new hire safety orientations., • • Conduct electrical training as needed to maintain level of knowledge for electrical workers., • • Conduct audits and reviews of electrical equipment, installations, and facilities to verify compliance with NFPA 70E, OSHA, and NEC., • • Develop and maintain electrical safety training for basic and advanced qualified electrical workers., • • Conduct job site safety audits on required daily/weekly safety tasks., • • Build and maintain safety training spreadsheets., • • Conduct job site safety inspections and create safety reports., • • Conduct safety audits on personnel, tools, equipment, material, exc., • • Conduct Lockout / Tag out reviews as requested., • • Conduct Safe Work Practices reviews., • • Act as Safety liaison and promote company safety efforts and safety incentive programs., • • Lead or assist with conducting general safety audits and near miss, incident, and accident investigations as needed., • • Enforce safe work practices that exceed OSHA minimum standards, enforce company rules and policies, enforce site-specific safety requirements, and enforces company disciplinary policy., • • Provide professional development for Safety Team as needed., • • Perform other assigned safety functions as required., • Work as part of a project team to provide deliverables and meet deadlines. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Subject Matter Expert (SME) level knowledge in electrical safety and NFPA 70E, • Possess a thorough understanding of Arc Flash Analysis protocols and concepts., • Have experience in Electrical Safety and knowledge of associated safety standards (OSHA, NFPA 70E)., • High voltage and low voltage electrical safety experience required., • Journeyman Electrician strongly preferred; With a minimum of 10 years electrical experience., • Bachelor's Degree in Engineering or Construction Management strongly preferred; High school diploma required., • OSHA-30 certification, CPR, First-Aid, Arc Flash (NFPA 70e) certification, Fall Protection and trench & excavation certified., • Microsoft Office Suite experience required - Word, Excel, Outlook Ability to work accurately and methodically under pressure and strict deadlines., • Ability to read, write, use a computer, analyze, and interpret OSHA standards. Ability to write reports using PlanGrid, safety correspondence, and site-specific safety plans., • Ability to effectively present information and respond to questions from groups of workers, supervisors, managers, and customers., • Fluency in both English and Spanish preferred, • Strong demonstrable communication style and interpersonal skills, particularly the ability to influence and negotiate both internally and externally with an open and inclusive style., • Excellent time and cost management skills in order to plan and achieve delivery to the desired quality to exceed customer expectations., • Leadership skills as well as the ability to work well within a team of other professionals., • Ability to understand and interpret system one-line drawings and operation of electrical equipment and testing devices., • Ability to work within a high-performance, cross-functional organization with extremely tight timelines and aggressive goals., • Travel: Up to 50% travel., • Must be safety conscious, detailed orientated, highly organized, and the ability to multitask., • Must have the ability to train, influence and motivate team members., • Must have acceptable current driver’s license., • Must have equipment operator experience. • Must have basic equipment maintenance knowledge., • Must have a valid Drivers License and clean driving record Work Availability: • Must maintain regular and acceptable attendance at such level as is determined by management., • Must be available and willing to work such weekends and holidays as the employer determines are necessary or desirable to meet its business needs., • Must be able to attend site-specific power utility shutdowns. Minimum Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Standing, sitting, walking, talking, hearing., • Climb stairs and/or ladders, use hands and fingers to handle, or feel., • Reach with arms and hands; climb or balance; and stoop, kneel, crouch, or crawl., • Occasionally lift and/or move up to 75 pounds., • Working conditions may be indoor and/or outdoor., • Working conditions may be hot or cold., • Noise level may be moderate at times., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus Owen Offers a Comprehensive Benefits Package!!! Company DescriptionFocusing on commercial and industrial construction along with superior service, the company has consistently delivered quality workmanship and outstanding service. Owen Electric Company has a reputation for industry excellence and keeping our promises, this has helped to retain a loyal employee and customer base. Join the OEC team and discover one of the fastest growing electrical contractors in the Southeast! We seek to hire the very best people in our industry. Our goal is for all our employees to find the work fulfilling and rewarding.Focusing on commercial and industrial construction along with superior service, the company has consistently delivered quality workmanship and outstanding service. Owen Electric Company has a reputation for industry excellence and keeping our promises, this has helped to retain a loyal employee and customer base. \r\n\r\nJoin the OEC team and discover one of the fastest growing electrical contractors in the Southeast! We seek to hire the very best people in our industry. Our goal is for all our employees to find the work fulfilling and rewarding.

Job Description Interplan LLC is a commercial architectural and engineering firm with over 50 years of experience, specializing in the design of restaurants, retail, and commercial developments for nationwide clients. We seek an Electrical Engineering (SME) to elevate our MEP Department’s electrical deliverables through expert review, QC, redlining, and mentorship for internal design teams. This role is pivotal in ensuring consistency, rigor, and technical excellence across electrical designs. The Electrical SME will act as a technical backstop — providing redline reviews, code guidance, and design oversight to support our engineers, designers, client managers, and Principals. Responsibilities • Perform detailed quality control (QC) reviews of electrical drawings (single-line diagrams, panel schedules, lighting layouts, power distribution, raceway/conduit routing) for compliance, clarity, and constructability., • Provide redline markups and technical commentary to electrical designers and engineers to ensure alignment with design intentions and quality standards., • Review electrical calculations including voltage drop, short circuit, fault current, load analysis, coordination, grounding/earthing, harmonics, and arc flash where applicable., • Verify that electrical designs adhere to the National Electrical Code (NEC), NFPA standards, energy codes, and local jurisdictional amendments., • Review and validate design of lighting systems, power distribution (transformers, switchgear, panels, feeders), motor control (MCCs, VFDs), emergency/egress lighting, fire alarm systems, and low voltage systems (data, telecom, fire alarm, security) as needed., • Evaluate vendor submittals, material specifications, equipment schedules, and Bill of Materials (BOM) for compliance with design intent and standards., • Identify recurring design gaps or inefficiencies and propose process improvements, standard details, or templates to enhance consistency across projects., • Mentor junior electrical designers and engineers, review their work, and provide feedback and training in best practices, code interpretation, and standardization., • Collaborate with MEP leadership and cross-disciplinary teams (mechanical, plumbing, structural) to ensure coordinated integration of systems., • Participate in virtual design review sessions, technical check-ins, and issue resolution meetings with project teams., • Support construction phase review efforts (RFI reviews, as-built checks) as needed.Qualifications & Prior Experience, • 15+ years of professional experience in electrical engineering, including strong experience in commercial or commercial/industrial development., • Demonstrated expertise in electrical design review and quality control in building projects (restaurants, retail, institutional, etc.)., • Deep working knowledge of NEC, NFPA, energy codes, and local electrical code amendments., • Proficiency with AutoCAD and/or Revit (or similar CAD/BIM tools) for electrical layouts, one-lines, and panels., • Experience with electrical analysis tools (e.g., ETAP, SKM, EasyPower, or equivalent) for load flow, short circuit, coordination, arc flash studies is a strong plus., • Solid experience designing or reviewing lighting systems, power distribution, motor controls, conduit & cable routing, grounding, and low voltage systems., • Excellent written and verbal communication skills; ability to explain design issues and redline feedback clearly and constructively., • Professional Engineer (PE) license preferred but not required, especially if the candidate has deep QC/review experience.Compensation & Benefits, • Competitive compensation commensurate with expertise., • Continuing education, training, and professional growth opportunities., • Medical, Dental, and Vision benefits., • Short-Term Disability; employer-paid Long-Term Disability and Life Insurance., • Flexible Spending & Dependent Care Accounts., • Employee Assistance Program and Health & Wellness support., • Paid Holidays and generous PTO., • 401(k) with employer match and financial wellness resources., • Performance-based bonus or incentive program. Join our team of engineering leaders at Interplan and play a key role in elevating the technical quality and consistency of our electrical design deliverables across commercial development.

Job DescriptionDescription: Leverage your paralegal or attorney background in a whole new way. At Synergy, we help trial lawyers protect injury victims by simplifying the post-settlement process—from Medicare compliance to lien resolution. Now, we’re seeking a Client Success Manager who can bring real-world PI or subrogation experience to a dynamic, leadership-oriented role. This isn’t sales. This isn’t onboarding. This is about owning the ongoing relationship with some of our most important clients—high-volume, high-impact personal injury law firms we call Integrated Partners. You'll be their strategic point of contact, overseeing service delivery, resolving escalations, and helping drive continuous improvement across departments. If you're a paralegal or attorney, residing in Central Florida, who's ready to leave the casework grind behind and step into a role where your legal insight drives operational impact—this is your opportunity. Requirements: Who This is For: • A seasoned PI paralegal, former defense subrogation attorney, or lien resolution expert ready to transition into strategic operations, • Someone who can confidently speak the language of attorneys and collaborate across legal, ops, and tech teams, • A natural problem solver who takes pride in smoothing out processes and elevating the client experience What You’ll Do: 1. Serve as the Operational Relationship Owner • Be the primary point of contact for a book of Integrated Clients (high-volume PI law firms), • Facilitate monthly/quarterly meetings and provide insight on trends, concerns, and opportunities, • Proactively manage escalations, feedback loops, and cross-functional coordination 1. Monitor Performance & Advocate for Solutions • Review firm-specific metrics and ensure alignment with service expectations, • Identify root causes of service issues and drive FLASH (our internal resolution system) improvements, • Collaborate with Sales, IT, and Lien Ops to advocate for scalable improvements 1. Ensure Quality and Service Consistency • Conduct file reviews to assess service levels, track trends, and ensure process adherence, • Contribute to leadership meetings, policy development, and internal training materials What You Bring: • Bachelor’s degree required; JD or Paralegal Certification strongly preferred., • 5+ years of experience in personal injury law, healthcare subrogation, lien resolution, or a related field, with proven success managing attorney and client relationships., • Strong legal background preferred, ideally as a paralegal or attorney with exposure to PI, lien resolution, or subrogation., • Exceptional communication skills, both written and verbal, with the ability to lead high-level client meetings and cross-functional internal discussions., • Professional, polished presence with a client-first mindset — skilled at building trust and long-term relationships with demanding firms., • Highly organized and detail-oriented; able to manage multiple clients, deadlines, and competing priorities without sacrificing quality., • Tech-savvy and adaptable, with proficiency in CRM platforms, workflow tools, Microsoft Office Suite, and comfort learning new technologies (including AI)., • Problem-solving mindset with the ability to triage issues, drive resolution, and maintain alignment across teams and clients., • Growth-oriented professional eager to leverage legal expertise in a leadership role focused on client success and strategic relationship management. Why Synergy? We’re not your typical legal support company—we’re a mission-driven, tech-enabled BPO transforming the post-settlement process. Here’s what makes Synergy special: Culture of Collaboration: We’re a tight-knit team that leads with empathy and supports one another to win together Room to Grow: • Leadership development, • Continuing education, • Promotion opportunities for those who raise the bar Benefits that Support Life: • Competitive compensation, • Medical, dental, and vision coverage, • 401(k) with company match, • Generous PTO and paid holidays, • Wellness initiatives and community impact opportunities The Synergy Experience: A chance to contribute to a company that’s changing the game—for our clients, our partners, and the injured individuals they serve. Salary Description: Base + variable performance bonus plan. Year 1 range: $75,000 - $95,000, depending on experience and performance.

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing your opi

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Centerwell Health - 11010 Florida Crown Drive - Responsibilities: Maintaining the site calendar; Serving as the first contact for the Orlando site; Ordering materials and supplies for the site; Maintaining associate spaces in Sierra View; Handling ingoing/outgoing mail.

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Nesco Resource - - Responsibilities: Weld using MIG and Stick (SMAW) per AWS and ASME publications; Read blueprints and perform shop math to layout, fabricate and weld parts; Inspect welds for cracks, burn through and weld spatter; Play a key role in training welders at all levels; Maintain safety

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Davita - 8259 Clarcona Ocoee Road - Responsibilities: Provide administrative support to dialysis teams and patients; Process change requisitions, treatment logs, patient charts, invoices and purchase orders; Assist patients with transportation arrangements and physician appointments; Maintain accura

Tradesmen International - JobID: 88097B9F740B4036B565178D1C48400E [Fabricator] As a Welder at Tradesmen International, you'll: Read blueprints and other engineering drawings in order to perform efficiently; Read and interrupt technical manuals as applicable; Demonstrate knowledge of various metals c

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Administrative Assistant related experience (data entry, filing, printing, etc.Strong organizational and communication skills.The Administrative Assistant will support a state government utilities client by ensuring efficient day-to-day office operations and administrative processes.This role requir

Boutique law firm with offices in New York, Miami and Orlando is seeking a bright, highly motivated Operations / Administrative Assistant to join our operations team in Orlando or Miami.This position wears many hats, including reception, office administration, personal assistance, and general cleri

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Humana - 11010 Florida Crown Drive - Responsibilities: Maintaining the site calendar; Serving as the key first contact for the Orlando site, helping with scheduling of tours, visitors, and security requests; Scheduling meetings; Taking meeting minutes and doing follow up; Project management of onsit

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Remote Work From Home Data Entry Clerk – Entry Level Position Work from home position for job seekers from virtually any work background who are interested in part-time, side gigs, micro jobs, remote telecommute jobs.We are looking for folks who want to earn weekly doing something strictly online

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Pipe Fitter / TIG Welder ASME IX (6G).AM - 3:30 PM (Overtime as needed).Certified Pipe Fitter / TIG Welder ASME IX (6G).Proficient in blueprint reading and weld symbols.Strong pipe layout, fit-up, and fabrication skills.Ability to lift 50 lbs and work in a manufacturing environment.Pipe Fitter / TIG

Remote Work From Home Data Entry Clerk for Entry Level Position Work at home position for job seekers from virtually any work background who are interested in part-time, side gigs, micro jobs, work from home jobs and remote telecommute jobs.Earn serious cash working part time or full time.Learn new

At ENFRA, we blend a rich history with a forward-looking vision.With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions.Our commitment to leveraging emerging technologies ensures that we remain at the forefront