Trabajos heavy equipment operator en Los Angeles, CaliforniaCrear alertas

Job Description The Machine Operator is responsible for the setup, calibration, and operation of the waterjet and/or CNC machine. May also inspect products against customer specifications and assist with other warehouse responsibilities. A. M. Castle & Co. has over 135 years of experience as a leader in the metals service center industry. We provide exceptional benefits including but not limited to medical, dental, vision, 401K match, disability benefits and tuition reimbursement. Training will start with the hours of 7am - 3:30pm. Once training is complete, hours will move to 2:30pm - 10pm Compensation: $23 - $26/hr + incentive eligible PRIMARY RESPONSIBILITIES/ACCOUNTABILITIES: Essential Primary Responsibilities: • Sets up and operates cutting machine(s) in accordance with established procedures and guidelines., • May perform programming and/or editing on assigned machine(s)., • Performs preventative maintenance on assigned machine(s) and corresponding equipment., • May perform other responsibilities in the warehouse as requested., • Performs a variety of material movement tasks for order filling, receiving, and loading., • Safely uses assigned power equipment to move material and meet order requirements (crown truck, Raymond side-loader, overhead crane, forklift)., • Follows customer requirements to select, fill and package orders. Physical Demands/Working Conditions: • Stooping, standing, and manual dexterity, • Light lifting (occasional 25 lbs or less), • Heavy lifting (frequent 25 lbs+), • Assigned safety equipment must be worn at all times (hard hat, safety shoes with metatarsal, safety glasses with side shields, gloves, arm guards), • Frequent exposure to mechanical moving parts MINIMUM QUALIFICATIONS: Required Qualifications: • Three years of warehouse experience, • Capable of being certified in assigned equipment (waterjet machine, forklift, Raymond side-loader, overhead crane, etc.), • Advanced measurement competency, • Knowledge of commonly used concepts, practices, and procedures within a warehouse environment, • Strong work ethic The ability to work scheduled overtime and emergency/mandatory overtime as needed Preferred Qualifications: • High school graduate or equivalent, • One year of work experience, • One year of equipment experience, • PC literacy, • Certified in assigned equipment (forklift, Raymond side-loader, overhead crane, etc.) We are an Equal Opportunity Employer Please view Equal Employment Opportunity Posters provided by OFCCP Company Overview: Founded in 1890, A. M. Castle & Co. is a global distributor of specialty metal and plastic products and supply chain services, principally serving the producer durable equipment, oil and gas, commercial aircraft, heavy equipment, industrial goods, construction equipment, retail, marine and automotive sectors of the global economy. Its customer base includes many Fortune 500 companies as well as thousands of medium and smaller-sized firms spread across a variety of industries. Within its metals business, it specializes in the distribution of alloy and stainless steels; nickel alloys; aluminum and carbon. Together, Castle operates service centers located throughout North America, Europe and Asia.

Job Description Hydraulics International, Inc. (HII) is seeking a Press Brake Operator – Sheet Metal I responsible for the setup, operation, and maintenance of press brake machinery used to bend, form, and shape metal materials. This position requires a strong understanding of machine operations, metalworking, blueprint reading, and quality inspection to ensure parts are produced accurately, safely, and efficiently. Key Responsibilities • Set up and operate press brake machines to bend, form, and shape metal materials according to blueprints, technical drawings, and work orders., • Select the appropriate tools, dies, and machine settings for each job., • Measure and inspect completed workpieces using calipers to ensure they meet quality and dimensional requirements., • Follow all safety protocols, including the proper use of personal protective equipment (PPE) and machine guarding., • Maintain a clean, safe, and organized work environment., • Collaborate with production team members to ensure projects are completed accurately and on schedule., • Identify and report defects or issues with materials, equipment, or processes to the appropriate supervisor. Qualifications • High school diploma or equivalent required; technical training in machine operation is preferred., • 3 years previous experience operating press brake machines in a manufacturing or metal fabrication environment., • Ability to read and interpret blueprints, technical drawings, and work orders., • Strong mechanical aptitude and attention to detail., • Familiarity with manufacturing safety standards and procedures., • Basic math skills for measurements and machine setup calculations., • Ability to lift heavy materials 40 pounds and stand for extended periods. Salary Expectations $25–$28 per hour Competitive Compensation and Benefits Package • Health insurance, including dental, vision, and life insurance, • Paid time off, • 401(k) About HII HII, headquartered in Chatsworth, California, U.S.A., is a leading supplier of integrated products, services, and support to military forces, aviation and commercial industries, government agencies, and prime contractors worldwide. Focused on defense and commercial technology, the Company develops, manufactures, and supports a broad range of systems for more than one hundred industries, as well as mission-critical and military sustainment requirements worldwide. We are extremely proud that our extensive design capabilities enable us to produce some of the most sophisticated units known to today’s technology. Our corporate, engineering, and manufacturing facilities, located in Chatsworth, California, and Forsyth, Georgia, encompass more than 625,000 square feet. Our manufacturing facilities are equipped with state-of-the-art equipment, including CNC lathes and mills, computerized tube bending equipment, automatic press brakes, programmable punch presses, laser topography scanners, and other quality verification devices. HII has combined exceptional talent, skill, and equipment to best serve our customers’ needs. HII is an Equal Employment Opportunity Employer and strictly prohibits discrimination and harassment against qualified individuals based on their status as protected veterans or individuals with disabilities. HII also prohibits discrimination and harassment against all individuals based on race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, including physical, emotional, and mental health conditions, or status as a protected veteran. Applicants who require a reasonable accommodation to complete any part of the application process, or who are unable to access or use the online application process and require an alternative method of applying, may contact (818) 998-1231, extension 2200, for assistance.

Job Description Packaging Machine Operator Position Overview: The purpose of the position is to produce stick packs with customer supplied components to customer specifications and WePackItAll quality standards. Responsibilities are to know how to completely assemble and setup stick pack machines as well as disassemble and clean the machines, know how to operate, troubleshoot and adjust the machines, do quality inspection and seal tests during production. Consistently produce quality product while following all GMP guidelines. The position requires the ability and knowledge to work with machinery and tools. Work with items that are heavy, use a stool and be able to climb stairs or ladders. The position requires to work independently, with team members, and have a sense of urgency to keep production running. Work schedule is Monday through Friday with potential weekend work based on business needs. Key Responsibilities: A good machine operator is a self-motivated team player. They have the skills to successfully work with their assigned machinery to keep it running efficiently, produce quality sticks, and verify only satisfactory sticks transition into a finished good. Effective machine operators can think on their feet, make quick decisions, and have strong attention to detail to ensure no machinery issues go unnoticed. • Understands and enforces all GMPs, SOP’s and SAFETY PROTOCALS., • Attend and perform work where no harm is caused and practice safe work habits., • Always apply safety measures, do not avoid safety features and employ unsafe behavior that can cause any risk or harm., • Ensure that all machine guards and safety devices are properly located and in place., • Ensure all safety devices are in place and in working order. (Door sensors, “E” stops)., • Notify immediate supervisor or any other WPIA member of leadership of any safety device failures., • Follow all sanitation procedures by following processes, safety requirements, and maintaining a clean room. No scrap laying around, tools placed back on shadow board, area picked up and organized., • Adheres to and enforces all safety requirements and wears all required safety equipment., • Conduct routine inspections of efficiency and systems of safety., • Ability to read and interpret documents such as safety regulations, manuals of operations and maintenance instructions., • Understands the specifications on the work order and verify the components in the room as required by work order., • Clean, set-up, and fine tune the production machine to meet quality standards and the specifications provided on the work order., • Responsible for inspecting all equipment parts to confirm no broken/damaged or missing parts. Non-conforming parts must be reported immediately to quality and maintenance personnel., • Perform Lockout/Tagout when working on sensitive areas such as replacing heaters, jaws, knives, disassembling, and reassembling of augers/formers etc., • Ability to run at a consistency of 80% efficiency or above., • Hit target yield of 94% or higher., • Adjust machine and equipment parameters based on setup sheet., • Constant communication with the technicians regarding current or ongoing issues using commonly used terminology., • Arrive to work on time and maintain company attendance standards., • Ability to work in a fast-paced environment where items are moving at a rate of approximately 300-400 items per minute., • Strong problem-solving skills and the ability to pivot in unplanned operations., • Maintains appropriate work behavior and professionalism with co-workers and management., • Rotate into various positions as required by production needs., • Accurately records downtime and the cause of the issue. Level 1 operator • Experience with hand tools required to perform job responsibilities (Rubber Mallet, Allen Keys, and wrench etc.)., • Maintain running efficiency of 80% average or above., • Ability to operate multiple Stick pack machines., • Identifies, resolves, and communicates safety, quality, or productions issues., • Identifies, assembles/disassembles, installs augers and/or formers., • Notifies maintenance personnel of seal jaws wear and tears., • Demonstrates the proper procedure on how to install the vacuum system. (Volkmann/Piab), • Performs connection from supersack to Volkman., • Demonstrates the proper procedure on how to change and feed a roll of film through the machine., • Ability to complete dry clean/full clean., • Demonstrates proper set up and troubleshooting on ink jet or laser printers., • Demonstrates proper procedure on how to change both sets of sealing blocks and fin seal guides according to the work order specifications., • Has participated in 2 documented complete changeovers. Level 2 Operator • Exceeds all level 1 requirements., • Maintain running efficiency of 85% average or above., • Can diagnose any unusual noise on the machine and prevent major breakdown., • Can complete basic PM’s without the assistance of technicians., • Has completed 3 full changeovers without the help of technicians. Level 3 Operator • Exceeds all level 1 and 2 requirements., • Maintain a running efficiency of 90% or above., • Ability to operate and train new operators on all stick pack machines., • Demonstrate proper trouble shooting procedures for mechanical and process issues. Qualification: • 1 year minimum of machine operating experience, • Basic Computer skills, • Basic Math skills, • Able to read and understand instructions in English, • Packaging experience preferred, • Ability to lift up to 30lbs Education: • High school diploma or equivalent Benefits: • 401(k) & Roth 401(k), • Employee Discounts, • Dental Insurance, • Health Insurance, • Vision Insurance, • Paid Life Insurance, • Paid Holidays WePackItAll is an equal opportunity employer, and we encourage candidates from all backgrounds to apply. If you meet the qualifications and are excited about contributing to our dynamic team, please submit your resume and cover letter.

Job DescriptionJob description Job Description: Position Overview The Machine Operator - Grinder is responsible for setting up, operating, and maintaining grinding machinery to produce high-quality parts according to specified measurements and tolerances. This role involves monitoring the production process, performing inspections, and ensuring adherence to safety and quality standards. Key Responsibilities • Machine Operation:, • Set up and operate grinders, including surface, cylindrical, or centerless grinders., • Adjust machine settings, such as speeds, feeds, and tooling, to achieve the desired results., • Quality Assurance:, • Measure and inspect finished parts using precision tools (e.g., micrometers, calipers, and gauges) to ensure compliance with blueprints and specifications., • Identify and address any quality issues during the grinding process., • Machine Maintenance:, • Perform routine maintenance and cleaning of grinding equipment to ensure optimal performance., • Report any mechanical or technical issues to the maintenance team., • Production Monitoring:, • Read and interpret work orders, blueprints, and technical drawings., • Monitor grinding processes to maintain efficiency and minimize downtime., • Safety Compliance:, • Follow safety protocols and wear appropriate personal protective equipment (PPE)., • Maintain a clean and organized work area to reduce hazards., • Collaboration:, • Work closely with the production team, quality control personnel, and supervisors to meet production goals., • Assist in training new operators as needed.Qualifications and Skills, • Experience:, • Previous experience as a grinder operator or similar role in a manufacturing environment., • Familiarity with different types of grinders (surface, cylindrical, centerless, etc.)., • Technical Skills:, • Proficiency in reading blueprints and technical specifications., • Strong knowledge of grinding techniques and tool setups., • Ability to use precision measuring instruments., • Physical Requirements:, • Ability to lift heavy materials (up to 50 lbs) and stand for extended periods., • Good hand-eye coordination and manual dexterity., • Other Skills:, • Strong attention to detail and problem-solving skills., • Ability to work independently or as part of a team.

Job DescriptionDescription: We are looking for a machine operator to join our 2nd shift team in Gardena, CA. The Machine Operator plays a critical role in the operation and maintenance of machinery in our sheet metal manufacturing plant. This position is responsible for ensuring smooth production operations across a range of metal products, maintaining product quality, and adhering to safety standards. Essential Duties and Responsibilities: • Operate various metalworking machinery such as presses, shears, and roll formers., • Set up equipment for production runs and make necessary adjustments to ensure optimal performance., • Monitor machine operations and production processes to meet quality and quantity targets., • Perform quality control checks on finished products to ensure adherence to specifications., • Conduct routine maintenance and troubleshooting of machines to prevent downtime., • Follow all safety guidelines and use appropriate personal protective equipment (PPE)., • Maintain accurate records of production activities, including materials used and machine performance., • Accurately use scanners to issue and complete work ticket reports., • Assist with receiving, inspecting, and organizing materials., • Collaborate with team members and supervisors to ensure efficient production processes., • Participate in continuous improvement initiatives for safety, quality, and productivity.Requirements: Education and Experience: • High school diploma or equivalent preferred., • Previous experience operating machinery in a manufacturing or metalworking environment preferred., • Forklift operation experience preferred, but not required. Skills and Competencies: • Strong mechanical aptitude and problem-solving skills., • Ability to read and interpret technical drawings and production orders., • Familiarity with safety standards and best practices in a manufacturing environment., • Effective communication and teamwork skills. Work Environment: This position operates in a manufacturing environment with exposure to noise, dust, and varying temperatures. Personal protective equipment (PPE) is required and provided. Physical Demands: The role requires the ability to handle various physical demands, including: • Regularly lift, push, or pull materials, which may occasionally exceed 50 lbs., • Standing for extended periods., • Frequent bending, twisting, kneeling, and operating heavy machinery., • Repetitive tasks, including machine operation and quality inspections., • Ability to work in varying temperatures within the production facility. Compensation: This position is non-exempt and complies with California's wage and hour laws. Compensation for this role is $18.06 per hour. Benefits: • 401(k), • Health Insurance (Medical, Dental, Vision), • Life Insurance, • Paid Time Off (PTO), • Paid Holidays Schedule: • Monday–Friday: 1:30 pm to 10:00 pm Equal Opportunity Employer: Bay Cities Metal Products is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive environment for all employees and applicants, regardless of race, color, religion, gender, sexual orientation, national origin, disability, or any other characteristic protected by California or federal law. At-Will Employment Disclaimer: Employment with Bay Cities Metal Products is at-will, meaning either the employee or the company may terminate employment at any time, with or without cause or notice, in accordance with California law.

American Equipment Holdings is an organization of leading overhead crane and hoist fabricators, distributors and field service providers, including American Equipment, Allied Crane, Eastern Crane & Hoist, Facilities Engineering, Kistler Crane & Hoist, Pacific Crane & Hoist, Patriot Crane & Hoist, Shannahan Crane & Hoist, and Washington Crane & Hoist. The consolidated entity is one of the largest independently owned overhead crane and hoist solutions providers in the country, serving over 4,000 customers nationwide. Together, American Equipment Holdings companies provide comprehensive solutions for everything related to customers’ overhead crane and hoist needs, including OSHA mandated inspections, preventative maintenance and repair field services, parts, engineering, ISO certified fabrication, new and replacement equipment, automated systems, system modernizations and training. We are looking for a Field Install Technician (Ironworker) in our Anaheim location. Essential Duties and Responsibilities: • Work as part of team to install equipment. With a focus on safety and customer service., • Accurately and neatly document work performed using a combination of electronic forms, software applications, and traditional handwritten reports where required., • Maintain a clean and safe work environment., • Travel may be required to install sites. Required Skills/Abilities • Iron work/steel erection experience., • Aptitude for either electrical or mechanical environments as well as familiarity with mechanical and electrical equipment, • Comfort with working at heights, • Welding experience- Wire Feed (MIG), Stick (SMAW), • Hands-on electro-mechanical maintenance or equivalent military experience a plus, • Competence in equipment operation. Reach forklifts, scissor lifts., • Ability to read blueprints and schematics, • Ability to work well in a team environment., • Strong communication skills, • Proven commitment to safety, • Passion for doing things right the first time., • Industry certifications including equipment operator, Welding, Rigging will be a plus., • Willingness to work overtime is required, • Possession of a valid driver’s license with good driving record, • Must pass drug-screen and background check Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. American Equipment Holdings represents the industry’s leading manufacturers such as Detroit Hoist, Columbus McKinnon, ACCO, R&M, Demag, Gorbel, Spanco, IMS, Harrington, Conductix, Magnetek & PE, among others and customers rely on its design, engineering, fabrication and installation capabilities to meet their unique application needs. American Equipment Holdings serves local, regional and national customers across a variety of end markets, including light & heavy industrial, automotive, mining, public utilities, military, aerospace & defense and energy, among others. For more information, visit www.amquipinc.com. Proof of right to lawfully work in the United States required. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Compensation details: 24-32 Hourly Wage PIcda534bae755-26276-40681245

Job DescriptionDescription: Bay Cities Metal Products is hiring a Driver in Gardena, CA. This role involves unloading shipments, organizing materials, picking and delivering orders to local customers, and maintaining BCMP vehicles and equipment. The ideal candidate will have a valid California Class A Driver's License, a safe driving record, and the ability to lift up to 50 pounds. The ideal candidate will have strong organizational skills, a commitment to customer service, and the ability to safely operate warehouse machinery and delivery vehicles. Essential Duties and Responsibilities: • Unload shipments from BCMP production facility, • Store/organize material at warehouse, • Confirm accuracy of shipment, • Pick orders for local customers and load onto flat bed, • Deliver orders to local customers, • Maintain BCMP vehicles (including forklift) in good, working condition, • Review deliveries with customers and have them sign shipping documents, • All associated paperwork, • Provide the highest level of customer service to all BCMP customers, • Deliver orders in a timely manner, • Maintain complete professionalism at all times, • Lift, carry, and handle materials up to 50 pounds, • Perform physical tasks such as kneeling, bending, squatting, and walking in the warehouse, • Operate a forklift (Certification required. BCMP will assist the right person.), • Operate a 24-foot gated truck, • Provide support in the machine shop as needed Requirements: Education and Experience: • High school diploma/GED (required), • Class A Driver License, • Delivery driving experience (required), • Forklift Operator 1 year (preferred), • Warehouse experience 2 years (preferred) Skills and Competencies: • Ability to work independently with minimal supervision, • Strong organizational skills with a focus on accuracy and attention to detail, • Excellent customer service and communication skills, • Ability to lift heavy objects (up to 50 pounds) and perform physical tasks in a warehouse environment, • Safe driving record and ability to operate a 24’-foot gated truck, • Forklift operation (certification required, or willingness to be trained), • Ability to handle paperwork and complete administrative tasks related to shipments, • Ability to kneel, squat, bend, and walk around warehouse, • Ability to operate a forklift (Certification required. BCMP will assist the right person.), • Ability to operate machinery as needed Work Environment: This position operates in a dual environment. In a warehouse setting with a focus on physical tasks such as material handling, order picking, and delivery, with exposure to noise, dust and varying temperatures. While driving, you'll be navigating local roads, with exposure to varying weather conditions. Safety protocols and attention to detail are essential when operating vehicles and handling materials in both warehouse and delivery settings. Physical Demands: The role requires the ability to handle various physical demands, including: • Must be able to lift, push, pull, and carry items up to 50 pounds, • Frequent walking, bending, kneeling, squatting, and sitting, • Ability to operate heavy equipment (forklift, flatbed truck), • Must maintain safety protocols when operating equipment and handling materials, • When driving, ergonomic practices should be observed to reduce strain, such as adjusting the seat for proper posture and taking regular breaks during long drives, • Must be able to load and unload deliveries, occasionally working in tight spaces or lifting materials from trucks, • Exposure to outdoor conditions during deliveries, requiring awareness of weather conditions and physical endurance for carrying and lifting packages, • Strict adherence to company safety protocols, including the use of proper lifting techniques and following vehicle inspection checklists before driving, • Ability to operate or assist with machine operation in a production environment, adhering to safety procedures at all times Compensation: This position is non-exempt and complies with Arizona’s wage and hour laws. Compensation for this role ranges from $22 to $30 per hour, depending on experience and qualifications. Benefits: • 401(k), • Health Insurance (Medical, Dental, Vision), • Life Insurance, • Paid Time Off (PTO), • 10 Paid Holidays Equal Opportunity Employer: Bay Cities Metal Products is committed to providing equal employment opportunities for all employees and applicants. We prohibit discrimination and harassment of any kind in accordance with federal, state, and local laws. At-Will Employment Disclaimer: Employment with Bay Cities Metal Products is at-will and may be terminated by either the employee or the company at any time, with or without cause or notice, consistent with applicable law.

Bay Cities Metal Products is hiring a Driver in Gardena, CA. This role involves unloading shipments, organizing materials, picking and delivering orders to local customers, and maintaining BCMP vehicles and equipment. The ideal candidate will have a valid California Class B Driver's License, a safe driving record, and the ability to lift up to 50 pounds. The ideal candidate will have strong organizational skills, a commitment to customer service, and the ability to safely operate warehouse machinery and delivery vehicles. Essential Duties and Responsibilities: • Unload shipments from BCMP production facility, • Store/organize material at warehouse, • Confirm accuracy of shipment, • Pick orders for local customers and load onto flat bed, • Deliver orders to local customers, • Maintain BCMP vehicles (including forklift) in good, working condition, • Review deliveries with customers and have them sign shipping documents, • All associated paperwork, • Provide the highest level of customer service to all BCMP customers, • Deliver orders in a timely manner, • Maintain complete professionalism at all times, • Lift, carry, and handle materials up to 50 pounds, • Perform physical tasks such as kneeling, bending, squatting, and walking in the warehouse, • Operate a forklift (Certification required. BCMP will assist the right person.), • Operate a 24-foot gated truck, • Provide support in the machine shop as needed Requirements: Education and Experience: • High school diploma/GED (required), • Class B Driver License, • Delivery driving experience (required), • Forklift Operator 1 year (preferred), • Warehouse experience 2 years (preferred) Skills and Competencies: • Ability to work independently with minimal supervision, • Strong organizational skills with a focus on accuracy and attention to detail, • Excellent customer service and communication skills, • Ability to lift heavy objects (up to 50 pounds) and perform physical tasks in a warehouse environment, • Safe driving record and ability to operate a 24'-foot gated truck, • Forklift operation (certification required, or willingness to be trained), • Ability to handle paperwork and complete administrative tasks related to shipments, • Ability to kneel, squat, bend, and walk around warehouse, • Ability to operate a forklift (Certification required. BCMP will assist the right person.), • Ability to operate machinery as needed Work Environment: This position operates in a dual environment. In a warehouse setting with a focus on physical tasks such as material handling, order picking, and delivery, with exposure to noise, dust and varying temperatures. While driving, you'll be navigating local roads, with exposure to varying weather conditions. Safety protocols and attention to detail are essential when operating vehicles and handling materials in both warehouse and delivery settings. Physical Demands: The role requires the ability to handle various physical demands, including: • Must be able to lift, push, pull, and carry items up to 50 pounds, • Frequent walking, bending, kneeling, squatting, and sitting, • Ability to operate heavy equipment (forklift, flatbed truck), • Must maintain safety protocols when operating equipment and handling materials, • When driving, ergonomic practices should be observed to reduce strain, such as adjusting the seat for proper posture and taking regular breaks during long drives, • Must be able to load and unload deliveries, occasionally working in tight spaces or lifting materials from trucks, • Exposure to outdoor conditions during deliveries, requiring awareness of weather conditions and physical endurance for carrying and lifting packages, • Strict adherence to company safety protocols, including the use of proper lifting techniques and following vehicle inspection checklists before driving, • Ability to operate or assist with machine operation in a production environment, adhering to safety procedures at all times Compensation: This position is non-exempt and complies with California's wage and hour laws. Compensation for this role ranges from $20 to $25 per hour, depending on experience and qualifications. Benefits: • 401(k), • Health Insurance (Medical, Dental, Vision), • Life Insurance, • Paid Time Off (PTO), • Paid Holidays Equal Opportunity Employer: Bay Cities Metal Products is committed to providing equal employment opportunities for all employees and applicants. We prohibit discrimination and harassment of any kind in accordance with federal, state, and local laws. At-Will Employment Disclaimer: Employment with Bay Cities Metal Products is at-will and may be terminated by either the employee or the company at any time, with or without cause or notice, consistent with applicable law.

Quinn Company, your local Caterpillar dealership, is hiring a Transport Driver in Sylmar, California. Founded in 1919, Quinn Company is a full-service Caterpillar dealership that sells, services, and rents a comprehensive line of new and used construction, agricultural, and material handling equipment, along with diesel and natural gas engines. As a Caterpillar dealership, Quinn Company combines the agility and entrepreneurial spirit of a local business with the global reach and support of a Fortune 50 companyoffering the best of both worlds. Quinn Company consistently ranks among the top-performing Caterpillar dealers worldwide. Our competitive, performance-based culture is central to our continued success. The Transport Driver is responsible for safely loading, securing, transporting, and unloading heavy equipment using a tractor-trailer rig. Deliveries and pickups are performed at customer sites, Quinn Company facilities, and supplier locations. This role requires adherence to safety regulations, accurate documentation, and flexible scheduling. Wages: $25.80 $30.00 per hour (based on experience and education) Responsibilities: • Maintain a valid California Class A Driver's License, acceptable driving record, and current DMV Medical Certificate, • Properly operate company vehicles in compliance with DMV and DOT regulations, • Participate in the U.S. Department of Transportation drug and alcohol testing program, • Perform pre-trip and post-trip vehicle safety and operational inspections, • Complete daily routine maintenance and minor mechanical repairs as skill and time allow, • Operate various equipment to load, secure, transport, and unload items safely, • Use material handling equipment such as pallet jacks, forklifts, and cranes, • Demonstrate basic equipment operation to customers when required, • Use road maps and routing tools to ensure efficient and timely transportation, • Maintain permits, bills of lading, invoices, and other delivery documentation, • Maintain accurate and up-to-date driver logbook records, • Work a flexible schedule to meet company and customer needs Qualifications: • High school diploma or GED required, • One year of related driving experience and/or training, or an equivalent combination of education and experience, • Valid California Class A Driver's License, • Current DMV Medical Certificate, • Forklift operator certification preferred Physical Demands: • Regular standing, walking, reaching, talking, and hearing, • Frequent use of hands for handling and operating equipment, • Occasional climbing, balancing, stooping, kneeling, crouching, or crawling, • Ability to regularly lift up to 10 lbs, frequently lift up to 25 lbs, and occasionally lift up to 100 lbs, • Vision requirements include close, distance, color, peripheral, depth perception, and focus adjustment Work Environment: • Frequent exposure to moving mechanical parts, chemicals, and outdoor weather conditions, • Occasional exposure to high or precarious places and airborne particles, • Noise levels are typically loud Quinn Company is an Equal Opportunity Employer (M/F/V/DV). Quinn Group, Inc. provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, age, national origin, physical or mental disability, or veteran status. The company maintains an Affirmative Action Plan to promote employment and advancement opportunities for minorities, women, qualified individuals with disabilities, veterans, and disabled veterans.

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Career AdvancementJob SummaryWe are seeking a Crane Operator to join our team. In this role, you will operate cranes and hoists to safely transfer loads to construction sites. The ideal candidate is an experienced Crane Operator who prioritizes safety and has excellent attention to detail. Responsibilities • Operate cranes and hoists, • Secure loads to cranes, • Transfer loads to construction sites and safely discharge, • Routinely inspect equipment and perform safety checks, • Perform basic repairs, • Follow all safety procedures and protocols, • Communicate verbally and nonverbally with ground operatorsQualifications, • Previous experience as a Crane Operator or in a similar position is preferred, • Certification from the National Commission for the Certification of Crane Operators (NCCCO) is preferred, • Commercial drivers’ license, • Ability to pass background and drug check, • Ability to meet the physical demands of the job, including working at heights, standing for extended periods, and lifting heavy objects, • Excellent attention to detail and focus

Job Description CNC Machinist - 3, 4 & 5 Axis Setup/Operator If interested and you meet the qualifications, apply directly to reach Mike DominguezText: 562 566 4712Email: michdominguez@aerotek . com $30-$45/hr DOE Schedule: 1st and/or 2nd shift available 4/10 Schedule (Monday-Thursday) Heavy overtime available Mandatory Fridays, Saturdays optional Job Overview: We are seeking an experienced CNC Machinist / Setup Operator with hands-on experience operating and setting up 3-axis, 4-axis, and 5-axis CNC mills. Candidates with CNC lathe experience are highly encouraged to apply. This is a production-focused machining role where the primary responsibilities include machine setup, tool changes, offset adjustments, troubleshooting, blueprint reading, and inspection of precision-machined components. Programming is not required, but candidates with Mastercam or CNC programming experience will be considered a plus. The ideal candidate will have experience machining tight-tolerance parts and be comfortable taking a job from setup through final inspection. Responsibilities: • Set up and operate 3-axis, 4-axis, and 5-axis CNC mills., • Perform machine setups, tool changes, work offsets, and wear offset adjustments., • Load and run existing CNC programs., • Monitor machine performance and make necessary adjustments to maintain quality and efficiency., • Read and interpret blueprints, engineering drawings, and GD&T requirements., • Verify dimensions and quality using precision measuring instruments., • Perform first article, in-process, and final inspections., • Troubleshoot machining and tooling issues as they arise., • Maintain tooling, fixtures, and workholding equipment., • Perform deburring, grinding, tapping, cutting stock, and other secondary operations as needed., • Maintain a clean, organized, and safe work area. Qualifications: • 3+ years of CNC setup and operating experience., • Experience with 3-axis, 4-axis, or 5-axis CNC mills., • CNC lathe experience is a plus., • Ability to perform complete machine setups independently., • Experience changing tooling, adjusting offsets, and troubleshooting machining issues., • Strong blueprint reading skills., • Working knowledge of GD&T and tight-tolerance machining., • Experience using calipers, micrometers, bore gauges, height gauges, and other precision inspection equipment., • Strong understanding of tooling, feeds, speeds, and machining processes., • Good math and problem-solving skills., • Reliable attendance and dependable transportation. Preferred Qualifications: • Aerospace, medical device, defense, or precision manufacturing experience., • Experience with Haas, Mazak, Mori Seiki, Okuma, DMG Mori, Makino, or similar CNC equipment., • Knowledge of Mastercam or CNC programming (not required)., • Technical school, apprenticeship program, or equivalent machining training., • Experience machining complex parts with tight tolerances. Why Work Here? You will join a reputable manufacturing organization that values precision, safety, and continuous improvement. The company offers medical and vision benefits through a major carrier, along with the stability and credibility that come from a strong reputation in the industry. You can expect a professional environment where quality workmanship is recognized and where adherence to best practices and standards supports your long-term growth and development. Work Environment This position is based in a manufacturing environment that focuses on precision machining and quality production. You will work with CNC mills and lathes, primarily Haas machines with Fanuc controls, handling 35 axis operations and producing components that may include aerospace parts. The facility follows established procedures, safety guidelines, and ISO standards, emphasizing a structured and process-driven workplace. The role involves standing at machines, handling tools and materials, and working around typical shop equipment and noise levels associated with machining operations. Job Type & Location This is a Permanent position based out of Covina, CA. Pay and Benefits The pay range for this position is $35.00 - $75.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Covina,CA. Application Deadline This position is anticipated to close on Oct 13, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role We are hiring our first Automation Engineer focused on Material Flow to own how parts move across Hadrian factories. You will scope, deploy, and operate AMR fleets, floor conveyance, overhead material movement via cranes / gantries / hoists, and the MES / WMS integration that turns Hadrian's cells into an actual factory instead of a collection of islands. You will work closely with Factory Automation, Operations, Facilities / EHS, Mechanical / Cell ME, and the factory software team that owns MES / WMS. This is a hands-on, on-the-floor role. You will commission AMRs, conveyors, lift interfaces, and overhead movement systems; debug fleet managers, crane / gantry control boundaries, and PLC handshakes; and own the throughput, safety, and operator-adoption story for production material flow. What You'll Do Scope, select, and commission AMR fleets: vendor trade-off, pilot, volume rollout, fleet-manager configuration, charging / docking, acceptance testing, and ramp support. Design conveyance runs (belt / roller / chain-on-edge / pallet / lift) for inter-cell and intra-cell flow with cycle-time math, WIP buffers, jam recovery, maintainability, and failure-mode handoff. Design overhead material movement where floor conveyance or AMRs are the wrong tool: bridge cranes, gantries, hoists, lift assists, below-the-hook tooling, safe zones, and operator workflow. Own traffic and lift-zone management: intersections, charging zones, docking, crane envelopes, mixed human / robot aisles, pedestrian crossings, suspended-load boundaries, and safety zones. Integrate AMRs, conveyance, and overhead movement with MES / WMS, PLCs, cell controllers, and crane controls via VDA 5050, OPC-UA, MQTT, REST, and discrete / safety-rated handshakes where appropriate. Simulate (AnyLogic / FlexSim / Emulate3D / Plant Simulation) to validate throughput, WIP, aisle layout, charging locations, crane coverage, lift zones, and safety constraints before buying hardware. Partner with cell-level MEs on pickup / dropoff / lift interfaces: dunnage, presentation, hard stops, rigging points, sensors, clearances, and recovery after failed transfers. Build the material-flow standards and runbook every future factory inherits. What We're Looking For Bachelor's in ME, EE, Mechatronics, Industrial Engineering, or related. 3+ years deploying AMRs / AGVs, conveyance, overhead material-handling equipment, or hybrid material-flow systems in a production environment. Has personally commissioned at least one fleet (MiR, OTTO, Fetch, Zebra, Geek+, 6 River), one full conveyance run (Hytrol, Dematic, Intralox, Daifuku), crane / gantry / hoist cell interface, or similar production material-flow system. Working knowledge of VDA 5050, OPC-UA, MQTT, REST, PLC handshakes, and MES / WMS integration. Safety fluency for mixed pedestrian / robot aisles, lift zones, suspended loads, and operator recovery workflows. Simulation reps (AnyLogic / FlexSim / Emulate3D / Siemens Plant Simulation) or equivalent layout / throughput modeling. What Will Set You Apart Factory-scale material-flow reps (20+ AMRs, full-factory conveyance network, or hybrid AMR / conveyance / overhead movement system). ROS / ROS2 exposure for when vendor fleets fall short. Crane / hoist / lift-assist integration experience, especially around heavy or awkward aerospace hardware. Python for data pulls and fleet / WMS / equipment analytics. Lean / industrial engineering fundamentals (takt, kanban, water-spider replacement). EV / battery / aerospace / maritime material-flow at volume. Compensation $140,000 – $220,000 (actual range may vary based on experience) Benefits for Full-time Employees Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy Equity ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Use of AI in hiring Hadrian uses AI-assisted tools in our recruiting and hiring processes to help our team work more efficiently. This may include tools that help organize and analyze recruiting data, as well as an AI-powered notetaker that can record and transcribe interviews and help coordinate feedback. These tools support our team and are not used to make hiring decisions. All candidate evaluations and hiring decisions are performed by humans. If an interview will be recorded, you will be notified in advance and may opt out at any time with no impact on your candidacy. Candidate data processed through these tools is subject to the same protections described in our Privacy Policy. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionCrane Operator – Phillips Tank & Structure Phillips Tank & Structure (PTS) is seeking a Crane Operator to join our growing team. We specialize in complex, fast-paced nationwide tank repair and construction projects involving welded above-ground storage tanks, bolted tanks, and related industrial structures. About Phillips Tank & Structure PTS is not a typical tank construction company. Our engineering and field teams work with API 650, API 653, AWWA D100, AWWA D103, API 12D, and other major tank specifications. We build, repair, inspect, and install: • Aluminum geodesic dome covers, • Internal floating roofs (IFRs) and mechanical shoe seals, • Liquid level gauges, • Fire protection systems, • Silo support structures, • Industrial storage tanks, • Heating and insulation systems Our Purpose We aim to provide long-term, meaningful work where employees take pride in their craft, support one another, and succeed as a team. We continuously improve the health, strength, and quality of our company to support our employees, families, and communities. The PTS Difference • Our people come first., • Teamwork drives problem-solving., • Safety is everyone’s responsibility., • We innovate and improve daily., • Expectations are clear and consistent., • Coaching and support help employees grow., • We believe in accountability and continuous improvement., • We strive to create a workplace employees are proud to be part of., • Everyone contributes beyond their primary role—flexibility and willingness to support the team are core to our culture. Position Summary The Crane Operator plays a key role in supporting tank construction and repair projects across the United States. This position requires flexibility and a strong willingness to assist with other field responsibilities whenever crane operations are not actively in progress. Supporting the overall crew is an essential function of this role. Job Duties & Responsibilities • Operate and set up cranes according to job requirements and site conditions., • Perform daily equipment and safety inspections., • Move materials around the job site according to plans and schedules., • Monitor crane stability and load weights., • Work with signal personnel and ground crews to maintain safe operations., • Perform minor equipment maintenance and report mechanical concerns promptly., • Maintain accurate records of materials and equipment movement., • Ensure travel and lift paths remain clear and safe., • Assist with additional field responsibilities when crane operations are not in progress, including cleanup, fire watch, confined space attendant duties, and general crew support. Requirements • NCCCO TLL Certification required (additional certifications are a plus)., • Willingness to travel nationwide up to 75% of the time., • Strong communication and organizational skills., • Problem-solving mindset with willingness to suggest improvements., • Excellent attendance and punctuality., • Willingness to learn, adapt, and support the team., • Minimum age of 18 years old., • High school diploma or equivalent., • Must be legally authorized to work in the United States., • Valid driver’s license and willingness to authorize MVR checks., • Employment may be contingent upon successful completion of background checks and drug/alcohol testing, where permitted by applicable law., • Willingness to assist in other field roles is a critical requirement of this position., • Welding experience or ability is a plus. Physical & Work Environment Requirements • Ability to work outdoors in varying weather conditions., • Ability to climb ladders and work at heights., • Ability to lift, carry, and move materials consistent with job duties., • Ability to work around heavy equipment and industrial construction environments., • Ability to work extended hours and travel for project assignments as needed. Benefits • Competitive pay with annual reviews, • Health, dental, and vision insurance, • 401(k) with company match, • Strong culture of teamwork, learning, and development, • A workplace where employees are respected, supported, and given opportunities to grow Powered by JazzHR v9iu42vWqb

Job DescriptionAbout the Role:American Pipeline Services in Monrovia, CA is looking for a skilled Heavy Equipment Operator to join our growing team. If you thrive in a hands-on environment and take pride in operating heavy machinery with precision and safety, this is the opportunity for you. Come be part of a crew that keeps critical infrastructure running strong. Responsibilities: • Operate heavy construction equipment including excavators, bulldozers, backhoes, and loaders on pipeline and utility projects, • Perform trenching, grading, and excavation work in support of pipeline installation and repair, • Conduct pre-operation inspections and routine maintenance checks on all assigned equipment, • Follow project plans, grade stakes, and supervisor instructions to ensure accurate and efficient earthwork, • Adhere to all OSHA safety standards, company policies, and site-specific safety protocols, • Coordinate with crew members, laborers, and foremen to maintain smooth daily operations, • Identify and report equipment malfunctions, hazards, or site issues to supervisors promptlyRequirements:, • Proven experience operating heavy construction or pipeline equipment in a professional setting, • Familiarity with trenching, excavation, and underground utility or pipeline work preferred, • Valid driver's license required; CDL a plus, • Working knowledge of OSHA safety regulations and trench safety standards, • Ability to work in varying outdoor conditions, including confined spaces and uneven terrain, • Strong attention to detail, reliability, and a safety-first mindset, • Ability to work independently and collaboratively within a team environmentAbout Us:American Pipeline Services is a trusted name in pipeline construction, maintenance, and rehabilitation serving the greater Southern California area. Our clients rely on us for quality workmanship, on-time project delivery, and a commitment to safety that never wavers. We invest in our people — offering a supportive team culture, steady work, and the opportunity to grow your career in the pipeline and underground utilities industry.

Job DescriptionJob description Overview We are seeking a highly skilled and experienced Equipment Operator to join our team. The ideal candidate will be responsible for operating a variety of heavy equipment and machinery to support the construction, maintenance, and operations of our facilities and projects. This role requires a strong foundation in equipment operation, a keen eye for safety, and a commitment to meeting deadlines and project goals. Duties Excavations/trenching inside closed landfills for landfill gas collections and leachate systems is a plus. Must be flexible and willing to work overtime as needed. · Ensures equipment is in good working order, at all times. · Must possess skill, coordination, and awareness to operate heavy equipment in a safe manner with precision and efficiency. · Able to slope or bench an excavation. · Able to read and understand cut and fill stakes in order to align and position equipment appropriately. · Willingness to operate heavy equipment for long periods with continuous attention to detail and safety. · Observe and follow all applicable safety requirements. · Maintain consistent communication among field crew members by use of hand signals or radio to align and position heavy equipment properly. · Confirm necessary precautions have been taken to ensure no conflicts exist with both above and below-ground utilities. · All other duties as assigned by the Superintendent Skills A positive attitude and willingness to take direction. · Ability to communicate in English · Understanding proper safety procedures and recognizing hazards · Ability to understand Plans as they relate to trenching, excavation, and grading. · Knowledge of U.S.A. marks · Must be a team player and create a positive environment · Must be a self-starter and a go-getter · Ability to check grade and verify elevations using a laser, is a plus. · Ability to lead the day-to-day activities of a small crew, is a plus. · Must be flexible and willing to work overtime as needed, including weekends. License/Certification: • Driver's License (Preferred) Ability to Commute: • Oakland, CA (Required) Requirements Education/Training: · High School diploma or General Education Degree (GED) · Five (5) years of hands-on/demonstrated experience as a heavy equipment operator · 40-Hr HAZWOPER or current 8-Hr HAZWOPER Refresher Certification · Construction industry experience, preferred · Valid Driver's License and reliable transportation Job Types: Full-time, Contract Pay: $35.00 - $37.00 per hour Benefits: Benefits Industry Standard Benefits

Job Description Heavy Equipment Operator – Heavy Civil Construction Location: Southern California Pay: $30–$40/hour, based on experience Schedule: Full-time with consistent overtime Industry: Heavy Civil Construction Experienced Operators Wanted An established and growing heavy civil contractor in Southern California is looking to add experienced Heavy Equipment Operators to its field team. We are looking for true operators who understand grading and earthwork, not simply individuals who have spent time in the seat of a machine. If you know how to read the ground, understand grades and elevations, and can safely and efficiently operate equipment on active heavy civil projects, we want to speak with you. This is a long-term opportunity with consistent work, strong hourly compensation and regular overtime. What We're Looking For Qualified candidates should have experience with: Skid steers Grading equipment Earthwork and site grading Understanding grades and elevations Fine and/or rough grading Heavy civil construction sites Working around Foremen, Superintendents and other equipment operators Maintaining safe and productive jobsite operations Experience working for a heavy civil, grading, excavation, paving, roadway or site-development contractor is strongly preferred. What Makes You a Strong Candidate We're interested in operators who: Can do more than simply operate the machine Understand how to achieve and maintain grade Take pride in production and quality Know how to work efficiently around other equipment and crews Are dependable and consistently show up ready to work Communicate well with Foremen and Superintendents Put safety first without sacrificing productivity Want a stable company where they can build a long-term career Compensation & Hours $30–$40 per hour, depending on experience and skill level. The position also offers approximately 10+ hours of overtime per week, providing experienced operators with significant additional earning potential. Why Consider This Opportunity? This isn't a short-term project or temporary assignment. The company is looking for experienced operators who want to become part of the team and build a long-term future with an established heavy civil contractor. You'll have the opportunity to work consistent hours, earn overtime and work alongside experienced heavy civil professionals on grading, paving and site-development projects throughout Southern California. Confidential Application If you have solid heavy equipment experience and understand grading, elevations and earthwork, we'd like to hear from you. If you are interested in this Heavy Equipment Operator position in the LAS area, please apply! Or you can email Aaron@solidrockrecruiting.com with a copy of your resume for further confidential consideration! Feel free to call Aaron at 605-210-5080. Apply today for a confidential conversation about the position.

Job DescriptionForeman – Lead Precision Rigging and Industrial Equipment Installations Job Overview Company: Halbert Brothers Inc. Salary/Pay Rate: $130,000 – $160,000+ per year (Based on experience). Location: Field-Based (Travel Required) - City of Industry, CA. Job/Employment Type: Full Time. Project Scope: Industrial, Aerospace, and Commercial Machinery. Mandatory Licenses & Certifications: Valid Driver's License. The Opportunity You will serve as a high-impact field leader, directing the precision installation and relocation of heavy industrial assets for a company with nearly a century of excellence. This role empowers you to manage complex rigging logistics while mentoring crews in a supportive, family-owned environment. You will bridge the gap between technical blueprints and successful project completion, ensuring the highest standards of safety and mechanical accuracy. How You Will Make an Impact Supervise and mentor millwright and rigging crews to ensure high-quality delivery on all industrial job sites. Coordinate complex daily logistics, manpower, and project timelines to maintain strict schedule adherence. Execute precision rigging and alignment for high-value equipment, including CNC machines and aerospace components. Interpret detailed blueprints, schematics, and layout drawings to guide accurate machinery placement. Oversee the safe operation of forklifts and heavy rigging equipment in accordance with OSHA and DOT standards. Resolve real-time technical and logistical obstacles on-site to prevent project delays or safety hazards. Communicate effectively with project managers, dispatch, and clients to represent company values and project status. Required Qualifications & Experience Minimum of 5 years of leadership experience specifically within the millwright or rigging field. Proven ability to lead crews in the installation, removal, and relocation of heavy industrial machinery. Extensive experience with precision equipment alignment, leveling, and heavy rigging techniques. Proficiency in reading and interpreting technical drawings and mechanical specifications. Absolute willingness to travel to various regional project assignments as required. Preferred Qualifications & Experience Current OSHA safety certification and forklift operator certification. Demonstrated experience training junior team members or apprentices in a field environment. Advanced knowledge of CNC machines and specialized aerospace manufacturing equipment. Compensation & Benefits Competitive annual salary with weekly pay cycles. Company vehicle and fuel card provided for take-home use. Full benefits package including medical, dental, and vision coverage. Retirement savings program and comprehensive paid time off. Access to paid professional training and certification programs. About Us Family-owned and operated since 1933, Halbert Brothers Inc. is a trusted leader in heavy equipment rigging and specialized transport. We serve the commercial and government sectors with a culture rooted in reliability, professional growth, and personal accountability. We foster a team-oriented environment where careers are built for the long term through dedicated mentorship. Learn more at www.halbertbrothersinc.com. Halbert Brothers Inc. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description Demo/Grading - Heavy Equipment Operator - Track Loader Full-Time, Non-Exempt, Mon-Fri work Schedule, some weekends might be required Vic's Concrete Breaking and Removal, Inc. has provided quality assistance to the world of demolition, grading, and concrete cutting and breaking for commercial, residential and industrial communities throughout greater Southern California. Requirements: • Experience operating excavator with thumb both full-size excavators, mini-excavator, skid steer, Bobcat compact track loaders., • California Driver License (Required) - Must have Class A, • Experience working in demolition of residential and commercial structures., • Meet schedules and timelines., • Ability to work safely, productively, and efficiently., • Experience in demolition and grading., • Understand and follow oral and written instructions., • Work cooperatively and collaboratively with other team members., • Maintain punctual and consistent attendance., • Must be able to work overtime when required., • Must have hard working attitude. Experience: • Heavy equipment operation: 3 years (Required), • Grading operator: 2 years (Required) Benefits: • 401(k) + matching WHY WORK AT VIC's?: • Stability - We've been in business for over 25 years!, • Exceptional Work Culture - We stay true to our Core Values! Vic's Concrete Breaking and Removal, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Vic's Concrete Breaking and Removal, Inc. complies with applicable state and local laws governing nondiscrimination in employment. Job Posted by ApplicantPro

Job Description Underground Utilities/Grading Contractor is currently looking to fill full time positions for our current workload of Excavation of Wet Utilities ( Sewer, Water, Storm Drain), Dry Utilities(Edison, Att, Time Warner and Gas) and Grading (Rough/Fine). Current open positions for immediate fill: Heavy Equipment Operator: - Heavy Equipment Operators, with at-least (4) years equipment operating experience and (6) years trade experience, with the ability to operate: Backhoes, Excavators, Loaders, Water trucks, Motorgraders, Skidsteers, etc. We need operators that are skilled in excavation for pipeline trenches. Hourly Pay- based upon experience. We are a non-union company with very little prevailing wage work. Hourly Pay- $35-$45. Applications for Foreman and Pipelayer will also be accepted and considered at this time. Our current workload is primarily within the LA and Ventura Counties. All employees must be able to provide their own transportation to and from our jobsites. A valid drivers license is required for employment. Applicants are expected to be available for immediate or hire within 1-2 weeks. \nCompany Description Subzero Excavating is an Underground Utilities contractor specializing in both Wet & Dry Underground Utilities that has expanded into Site and Structural Concrete. Subzero Excavating is an Underground Utilities contractor specializing in both Wet & Dry Underground Utilities that has expanded into Site and Structural Concrete.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price — and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger — helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply. The Role From your very first day, you'll be hands-on with real spacecraft – leading integrated test campaigns, mastering the satellite bus, and working with world-class RE teams to validate system health. You'll then carry that experience into Mission Operations, where you'll command vehicles from the moment they leave the pad through the earliest moments in orbit. As we scale our fleet, you'll become an architect of on-orbit operations: designing the playbooks, tools, and systems needed to fly dozens, then hundreds, of satellites. This role is your chance to directly shape how we operate an entire space constellation. Responsibilities • Author test procedures (manual and automated) used to confirm spacecraft hardware and software flight worthiness, • Lead high-visibility integration campaigns for development and flight hardware, • Operate spacecraft (interpret telemetry, send commands) during system tests at the factory, test facilities, launch sites, and during pre-launch operations, • Serve as a key operator during on-orbit operations, responsible for real-time decision-making and coordination, • Interface with customers to scope testing performed on their payloads, based on expected functions and failure modes of interest, • Identify and elevate off-nominal conditions during test, and drive issues to resolution by engaging with the wider engineering team, • Clearly communicate status, needs, and risks to the entire K2 Space team (and payload providers) during high-intensity test operations, • Assess risks associated with different integration and test approaches, and clearly communicate mitigations and trade-offs Qualifications • Bachelor's degree in electrical, aerospace, mechanical, computer, or other relevant engineering discipline, • 1+ years of experience in an integration/test/automation engineering role (includes internships and design/build/compete extracurricular projects), • Competency with analog and digital circuits, sensors/instrumentation, and software, • Familiarity with basic RF, fluids, statics and mechanics, and data acquisition systems Nice to Have • Experience testing and troubleshooting spacecraft and their related components and systems, including subsystem checkouts and system acceptance testing, • Familiarity with mission operations concepts such as LEOP, telemetry, commanding, fault protection, and anomaly resolution, • Experience working in a clean room and with ESD-sensitive equipment, • Experience operating vehicles in a mission or production setting, • Hands-on experience with HITL or Flatsat software verification testbeds, • Proficient in Python and/or Rust, • Experience with Linux systems, • Excellent conflict resolution and negotiation skills Compensation and Benefits: • Base salary range for this role is $100,000 - $150,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level, • Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Job Description Join Our Team as a CNC Operator (3-Axis – Precision Machining) Location: Hawthorne, CA Job Type: Full-time About the Role Tru Architectural is a visionary contract glazing company with in-house production and installation facilities. We specialize in complex and high-end glazing scopes, including curtain walls, sliding doors, windows, and pivot doors. Learn more at www.truarchitectural.com. We’re looking for a skilled CNC Operator to support our manufacturing team in producing precision components for custom architectural systems. This role is hands-on and plays a key part in both machining and assembly, ensuring every component meets exact specifications and integrates seamlessly into final products. What You’ll Do Operate CNC Machinery: Set up and run 3-axis CNC vertical milling machines to mill, drill, and shape aluminum extrusions. Execute Precision Fabrication: Perform cutting, notch-work, and prep-work on high-value materials used in custom window and door systems. Support Assembly Processes: Assist with mechanical assembly of machined components, including hardware installation and weather stripping. Read Technical Drawings: Interpret architectural blueprints, shop drawings, and CAD layouts to ensure accurate machining and assembly. Ensure Quality Standards: Use calipers, micrometers, and gauges to verify tolerances and perform final fit checks. Maintain Equipment: Monitor tooling, perform routine maintenance (coolant, oil, etc.), and ensure machines are operating efficiently. Improve Processes: Collaborate with the Production Manager to streamline workflows, improve efficiency, and reduce material waste. Follow Safety Protocols: Maintain a clean and organized workspace while adhering to OSHA and company safety standards. What You’ll Bring We’re looking for someone detail-oriented, hands-on, and experienced in precision manufacturing. • Proven experience in a manufacturing or shop environment, • Strong experience operating 3-axis CNC machines, • Ability to read and interpret technical drawings and blueprints, • Experience with aluminum extrusions or architectural systems is a strong plus, • High attention to detail and commitment to quality craftsmanship, • Mechanical assembly experience preferred, • Ability to stand for long periods and handle heavy materials, • CNC certification is a plus, but not required with solid hands-on experience Our Commitment to You Competitive Pay: Based on experience Comprehensive Benefits: Health, dental, and vision insurance Financial Future: Retirement plan Work-Life Balance: Paid time off and holidays Work Environment • Based in our Hawthorne, CA production facility, • Fast-paced manufacturing environment focused on high-end, custom projects, • Emphasis on precision, quality, and craftsmanship Ready to Join the Team? If you take pride in precision work and want to be part of building high-end architectural systems, we’d love to hear from you. Apply today to join the Tru Architectural team. Company Description TRU Architectural is a leading provider of thermally broken aluminum systems for the building envelope. Partnered with world leader Schüco, TRU manufactures highly engineered fenestration systems in Hawthorne, CA, just minutes from LAX. Our primary business includes windows, doors, and curtain wall systems for high-end custom residential and commercial projects. With in-house design engineering, we provide innovative and customized solutions to meet evolving architectural demands. Our product offerings include curtain wall facades, zero-sightline windows, thin profile sliding doors, custom steel facades, skylights, and more. \nCompany Description TRU Architectural is a leading provider of thermally broken aluminum systems for the building envelope. Partnered with World leader Schuco, TRU manufactures their highly engineered fenestration systems in Hawthorne, CA, 10 minutes from LAX airport. Please visit our website at www.truarchitectural.com. Our primary business is Window, Doors and Curtain Wall systems for high end custom Residential and Commercial projects. TRU is focused on continually innovating to put their clients at the forefront of sustainable design and modern Architecture. With design engineering in house, we offer a multitude of custom solutions, adapting to meet current and future Architectural demands. TRU offers a full scope of Architectural products including all types of Windows, Swing Doors, movable walls in the form of Lift + Slide Doors, Thin Profile Sliding Systems, Bi-Fold Doors & Overhead Folding Doors, as well as Curtain Wall systems and Skylights. Specialties: Curtain Wall Facades (structurally glazed, captured), Zero-sightline Windows, Thin Profile Sliding Doors, Custom Steel Curtain Wall Facades, Flush Thresholds, Operable Skylights, Open Corners with Operable Systems TRU Architectural is a leading provider of thermally broken aluminum systems for the building envelope. Partnered with World leader Schuco, TRU manufactures their highly engineered fenestration systems in Hawthorne, CA, 10 minutes from LAX airport. Please visit our website at www.truarchitectural.com.\r\n\r\nOur primary business is Window, Doors and Curtain Wall systems for high end custom Residential and Commercial projects.\r\n\r\nTRU is focused on continually innovating to put their clients at the forefront of sustainable design and modern Architecture. With design engineering in house, we offer a multitude of custom solutions, adapting to meet current and future Architectural demands.\r\n\r\nTRU offers a full scope of Architectural products including all types of Windows, Swing Doors, movable walls in the form of Lift + Slide Doors, Thin Profile Sliding Systems, Bi-Fold Doors & Overhead Folding Doors, as well as Curtain Wall systems and Skylights.\r\n\r\nSpecialties: Curtain Wall Facades (structurally glazed, captured), Zero-sightline Windows, Thin Profile Sliding Doors, Custom Steel Curtain Wall Facades, Flush Thresholds, Operable Skylights, Open Corners with Operable Systems

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. Crane Operator – Phillips Tank & StructurePosition Summary The Crane Operator plays a key role in supporting tank construction and repair projects across the United States. This position requires flexibility and a strong willingness to assist with other field responsibilities whenever crane operations are not actively in progress. Supporting the overall crew is an essential function of this role. Job Duties & Responsibilities • Operate and set up cranes according to job requirements and site conditions., • Perform daily equipment and safety inspections., • Move materials around the job site according to plans and schedules., • Monitor crane stability and load weights., • Work with signal personnel and ground crews to maintain safe operations., • Perform minor equipment maintenance and report mechanical concerns promptly., • Maintain accurate records of materials and equipment movement., • Ensure travel and lift paths remain clear and safe., • Assist with additional field responsibilities when crane operations are not in progress, including cleanup, fire watch, confined space attendant duties, and general crew support. Requirements • NCCCO TLL Certification required (additional certifications are a plus)., • Willingness to travel nationwide up to 75% of the time., • Strong communication and organizational skills., • Problem-solving mindset with willingness to suggest improvements., • Excellent attendance and punctuality., • Willingness to learn, adapt, and support the team., • Minimum age of 18 years old., • High school diploma or equivalent., • Must be legally authorized to work in the United States., • Valid driver’s license and willingness to authorize MVR checks., • Employment may be contingent upon successful completion of background checks and drug/alcohol testing, where permitted by applicable law., • Willingness to assist in other field roles is a critical requirement of this position., • Welding experience or ability is a plus. Physical & Work Environment Requirements • Ability to work outdoors in varying weather conditions., • Ability to climb ladders and work at heights., • Ability to lift, carry, and move materials consistent with job duties., • Ability to work around heavy equipment and industrial construction environments., • Ability to work extended hours and travel for project assignments as needed. Benefits • Competitive pay with annual reviews, • Health, dental, and vision insurance, • 401(k) with company match, • Strong culture of teamwork, learning, and development, • A workplace where employees are respected, supported, and given opportunities to grow To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR AsZzjQjDCl

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now! Cold Heading Operator Department: SHOP Department/ Area: Cold Heading Position Summary: Candidates are required to run batches of high strength bolts at a constant heated temperature of 1000°ree;-1100°ree; to create a head on the bolt. Ability to go through the three progressive stations to complete the end product. Experience with materials such as inconel, titanium, 8740, and 4340 preferred. National #89 or Okuma 2 dies 3 blows preferred. Minimum Qualifications: High school diploma or equivalent. Basic math skills and English reading skills. Lifting up to 25 lbs and moving 40 lbs pans with dollies. Simple blue print reading and ability to use precision measuring tools (comparators and gages) a plus. Reporting Relationships: Report to the Cold Heading supervisor Working Conditions: All day standing, repetitive manual motion, heavy physical work. Standing most of the time. Candidate will be working on a powerful cold header machine to run batches of high strength bolts at a constant heated temperature of 1000°ree;-1100°ree; Success Factors: Willingness to learn and teach, attention to details, ability to work in a group and to memorize simple procedures for machining and checking. Bi-lingual is preferred. Good communication skills a plus Position type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. \nCompany Description MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits. MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\nhttps://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD\r\nReference Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description Overview We are seeking a skilled Operator to join our dynamic team. The ideal candidate will possess a strong mechanical aptitude and be proficient in operating various machinery and tools. Such as Loaders and Bobcats. This role is crucial in ensuring that production processes run smoothly and efficiently, contributing to the overall success of our manufacturing operations. Duties • Operate Loaders, • Operate and monitor machinery and equipment to ensure optimal performance., • Read and interpret blueprints to understand specifications and requirements for production., • Utilize precision measuring instruments to maintain quality standards., • Conduct routine maintenance on tools and equipment to prevent downtime., • Collaborate with team members in a warehouse setting to facilitate the movement of materials., • Utilize SolidWorks for design modifications and improvements as needed., • Demonstrate proficiency in welding techniques when required for assembly or repair tasks., • Maintain a clean and organized workspace, adhering to safety protocols at all times. Skills • Strong mechanical knowledge with the ability to troubleshoot equipment issues., • Must know how to drive different type of loaders, • Experience operating forklifts safely within a warehouse environment., • Familiarity with tooling processes and techniques relevant to manufacturing., • Previous experience in machining processes is highly desirable., • Knowledge of SolidWorks for design applications is a plus., • Welding skills are advantageous for various production tasks. Join our team as an Operator, where your expertise will help drive our production goals while working in a collaborative environment. We value dedication, skill, and a commitment to excellence. Experience: • Heavy equipment operation: 2 years (Required), • operate a bobcat: 2 years (Required), • Skid steer loader: 2 years (Required) Language: • Spanish (Required) License/Certification: • Driver's License (Required) Work Location: In person

Job Description Manual Lathe Operator A Manual Lathe Operator sets up and operates manual horizontal lathes to turn, bore, face, and thread metal or plastic workpieces based on blueprints. Key duties include installing cutting tools, monitoring machine speeds, and verifying dimensions with precision gauges (micrometers, calipers). They must maintain a safe, clean work area, perform, and perform, basic machine maintenance. Key Responsibilities • Machine Setup: Interpret blueprints, schematics, and work orders to determine dimensions and tool requirements., • Operation: Manually operate lathe machines to cut, shape, and finish materials, including turning, boring, threading, and drilling., • Quality Inspection: Measure completed parts using precision instruments like micrometers, calipers, and dial gauges to ensure conformity to specifications., • Tool Maintenance: Select, install, and replace cutting tools; sharpen tools as needed., • Material Handling: Load and unload workpieces, often using hoists or cranes., • Safety & Maintenance: Keep equipment clean, oil machinery to prevent rust, and follow all safety protocols. Required Qualifications & Skills • Experience: Generally 3-5 years of experience operating manual lathes., • Technical Skills: Strong understanding of machining techniques, blueprints, and metallurgy., • Measurement Tools: Proficiency with inspection tools (micrometers, gauges)., • Physical Stamina: Ability to stand for long periods, lift heavy materials, and work in a manufacturing environment., • Education: High school diploma or GED. Typical Physical Demands • Regularly standing, walking, bending, and crouching., • Lifting and moving heavy materials, often with machinery. \nCompany Description Small business with long term employees, great environment and culture! Small business with long term employees, great environment and culture!

Job Description Job Summary: Reporting to the General Manager, the Water Treatment Salesperson is responsible for generating sales while leading and motivating sales representatives to reach organizational sales goals. Duties/Responsibilities: • Manage an assigned sales territory, proactively identifying and developing sales opportunities in industrial and municipal markets., • Cultivate strong working relationships with Engineers and Plant Personnel within the target markets to establish trust and rapport., • Create new business opportunities by calling directly on prospective clients., • Develop and present sales proposals to prospective clients, effectively communicating the value of the offered solutions., • Prepare and deliver technical equipment sales presentations to showcase the benefits and features of the products. Focus on new account development., • Successfully introduce and support technical products, providing guidance on water treatment solutions., • Conduct water analyses, review operator logs, write reports, manage inventory, adjust chemical feed and control equipment, and place product orders to optimize water treatment processes., • Track projects from inception to completion, maintaining ongoing contact with Engineering and Plant Personnel throughout the design and bidding stages., • Review equipment specifications and collaborate with Engineers as specifications are developed to ensure product alignment., • Conduct site surveys to assess water management needs and develop comprehensive plans related to the control of legionnaires' disease. Required Skills/Abilities: • Strong mechanical aptitude and business acumen, • Self-motivated with a demonstrated ability to maintain organization and focus throughout a multi-step sales process., • Excellent communication, organizational, and time management skills., • Excellent organizational and time management skills, including prioritization and follow through., • Excellent interpersonal and negotiation skills.Education and Experience:, • Bachelor’s Degree in Engineering or an applied science., • A minimum of 5 years of water treatment sales experience., • Experience in industrial water treatment, including but not limited to treatment of steam boilers, cooling towers, closed loops, and wastewater systems.Physical Requirements: Heavy, • Regularly lift and move objects weighing up to 55 lbs., • Frequently stand, walk, use hands and fingers for handling and feeling items, reach with hands and arms, stoop, kneel, and crouch. Equal Opportunity Employer Statement Momar is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. We are a VEVRAA Federal Contractor and provide priority referral to protected veterans for all external job openings. In compliance with ADAAA, VEVRAA, and Section 503, applicants requiring accommodation to apply may contact [HR email/phone]. Momar does not discriminate against employees or applicants who inquire about, discuss, or disclose their compensation or that of others.

Job DescriptionCrane Operator – Phillips Tank & Structure Phillips Tank & Structure (PTS) is seeking a Crane Operator to join our growing team. We specialize in complex, fast-paced nationwide tank repair and construction projects involving welded above-ground storage tanks, bolted tanks, and related industrial structures. About Phillips Tank & Structure PTS is not a typical tank construction company. Our engineering and field teams work with API 650, API 653, AWWA D100, AWWA D103, API 12D, and other major tank specifications. We build, repair, inspect, and install: • Aluminum geodesic dome covers, • Internal floating roofs (IFRs) and mechanical shoe seals, • Liquid level gauges, • Fire protection systems, • Silo support structures, • Industrial storage tanks, • Heating and insulation systems Our Purpose We aim to provide long-term, meaningful work where employees take pride in their craft, support one another, and succeed as a team. We continuously improve the health, strength, and quality of our company to support our employees, families, and communities. The PTS Difference • Our people come first., • Teamwork drives problem-solving., • Safety is everyone’s responsibility., • We innovate and improve daily., • Expectations are clear and consistent., • Coaching and support help employees grow., • We believe in accountability and continuous improvement., • We strive to create a workplace employees are proud to be part of., • Everyone contributes beyond their primary role—flexibility and willingness to support the team are core to our culture. Position Summary The Crane Operator plays a key role in supporting tank construction and repair projects across the United States. This position requires flexibility and a strong willingness to assist with other field responsibilities whenever crane operations are not actively in progress. Supporting the overall crew is an essential function of this role. Job Duties & Responsibilities • Operate and set up cranes according to job requirements and site conditions., • Perform daily equipment and safety inspections., • Move materials around the job site according to plans and schedules., • Monitor crane stability and load weights., • Work with signal personnel and ground crews to maintain safe operations., • Perform minor equipment maintenance and report mechanical concerns promptly., • Maintain accurate records of materials and equipment movement., • Ensure travel and lift paths remain clear and safe., • Assist with additional field responsibilities when crane operations are not in progress, including cleanup, fire watch, confined space attendant duties, and general crew support. Requirements • NCCCO TLL Certification required (additional certifications are a plus)., • Willingness to travel nationwide up to 75% of the time., • Strong communication and organizational skills., • Problem-solving mindset with willingness to suggest improvements., • Excellent attendance and punctuality., • Willingness to learn, adapt, and support the team., • Minimum age of 18 years old., • High school diploma or equivalent., • Must be legally authorized to work in the United States., • Valid driver’s license and willingness to authorize MVR checks., • Employment may be contingent upon successful completion of background checks and drug/alcohol testing, where permitted by applicable law., • Willingness to assist in other field roles is a critical requirement of this position., • Welding experience or ability is a plus. Physical & Work Environment Requirements • Ability to work outdoors in varying weather conditions., • Ability to climb ladders and work at heights., • Ability to lift, carry, and move materials consistent with job duties., • Ability to work around heavy equipment and industrial construction environments., • Ability to work extended hours and travel for project assignments as needed. Benefits • Competitive pay with annual reviews, • Health, dental, and vision insurance, • 401(k) with company match, • Strong culture of teamwork, learning, and development, • A workplace where employees are respected, supported, and given opportunities to grow Powered by JazzHR lLwnoEpbUd

Class specifications are only intended to present a descriptive summary of the range of duties and responsibilities associated with specified positions. Therefore, specifications may not include all duties performed by individuals within a classification. In addition, specifications are intended to outline the minimum qualifications necessary for entry into the class and do not necessarily convey the qualifications of incumbents within the position. DEFINITION: Under general supervision, leads and participates in the operation of heavy equipment at the City landfill facility; makes minor mechanical adjustments in the field; performs other related duties as required. DISTINGUISHING CHARACTERISTICS: The Senior Landfill Equipment Operator is the lead class in the Landfill Equipment series. The incumbent performs lead supervisory duties, including assisting in the planning, assigning, and evaluation of the work of subordinates, giving recommendations on discipline, and providing training as required in the daily operations of the City's Landfill and heavy equipment operations. This classification is distinguished from the next higher classification of Solid Waste Supervisor by the latter's overall responsibility for the management of the City's Landfill. SUPERVISION RECEIVED/EXERCISED: Receives general supervision from the Solid Waste Supervisor. May exercise technical and functional supervision over maintenance workers and/or assigned workers. ESSENTIAL FUNCTIONS: (include but are not limited to the following) • Leads and participates in the operation of heavy equipment; plans, assigns, and evaluates the work of subordinates; participates in the development of work schedules., • Oversees Equipment Operator crews in the operation of heavy equipment, such as trucks, compactors, backhoes, front-end loaders, or specialized landfill operations equipment, as needed, to operate the sanitary landfill or transfer station., • Operates skip loaders, backhoes, dump trucks, and various other power-driven equipment in the performance of construction, maintenance, and repair tasks., • Provides instruction and answers questions; provides training as necessary to ensure successful performance of tasks in conformance to established standards and work schedules; participates in disciplinary action when appropriate., • Prepares and maintains records of work performed, and equipment, materials, and supplies used., • Performs routine inspection and preventive maintenance on assigned equipment and cites defects or needed repairs; orders parts and supplies; provides input into equipment purchases., • Establishes positive working relationships with representatives of community organizations, State/local agencies, City management and staff, and the public. OTHER DUTIES: (include but are not limited to the following) • Provides back up operations to Gas Control System Specialist and Landfill Gatekeeper when needed., • Assists Solid Waste Supervisor in daily operations of City Landfill., • May be exposed to confidential and privileged information during the course of duties, which should be maintained as such., • Performs other related duties as required. PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS: Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping, and making repetitive hand movement in the performance of daily duties. The position also requires both near and far vision when inspecting work and operating assigned equipment. The need to lift, carry, and push tools, equipment, and supplies weighing 50 pounds or more is also required. Additionally, the incumbent in this outdoor position works in all weather conditions, including wet, hot, and cold. The incumbent may use cleaning and lubricating chemicals, which may expose the employee to fumes or airborne particles, and the incumbents may be exposed to mechanical and electrical hazards. The nature of the work also requires the incumbent to climb ladders, use power and noise producing tools and equipment, drive motorized vehicles and heavy equipment, and often work with constant interruptions. The incumbent may be required to respond to after hours emergency call-outs and perform routine standby duties. Some of these requirements may be accommodated for otherwise qualified individuals requiring and requesting such accommodations. QUALIFICATIONS: (The following are minimal qualifications necessary for entry into the classification.) Education and/or Experience: Any combination of education and experience that has provided the knowledge, skills, and abilities necessary for a Senior Landfill Equipment Operator. A typical way of obtaining the required qualifications is to possess the equivalent of three years of increasingly responsible experience in the operation of heavy equipment, and a high school diploma or equivalent. License/Certificate: A valid class B California driver's license is required. Must maintain DL 51A health certification and possession of California endorsements required to operate applicable City vehicles and/or equipment. KNOWLEDGE/ABILITIES/SKILLS: (The following are a representative sample of the KAS's necessary to perform essential duties of the position.) Knowledge of: Mechanical, operational, and maintenance requirements of power-driven equipment; codes, regulations, and tasks requirements governing the use of equipment in completion of scheduled work; methods and techniques of supervision; applicable Federal, State, and local laws, codes, and regulations; methods and techniques of scheduling work assignments; modern office procedures, practices, methods, and equipment, including a computer and applicable software; methods and techniques for record keeping and report preparation; proper English, spelling, and grammar; and occupational hazards and standard safety practices. Ability to: Lead others in the performance of related activities; operate heavy equipment safely and effectively; detect the need for major mechanical maintenance; perform routine adjustments and maintenance on equipment used; use and care for hand tools in making minor adjustments and performing routine maintenance of equipment; coordinate activities of assigned staff with other City departments; prepare routine records; lead, supervise, train, motivate, and evaluate assigned staff; interpret, explain, and apply applicable laws, codes, and regulations; read, interpret, and record data accurately; organize, prioritize, and follow up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; follow written and oral directions; observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; and establish and maintain effective working relationships. Skill to: Safely and effectively operate, and supervise the operation of, a variety of light to heavy construction equipment, power and hand tools, and to perform other skilled and semi-skilled construction and maintenance tasks. Medical: Applicants will be required as a prerequisite to employment to successfully pass a physical examination, including a drug screen, the cost of which will be paid by the City. Selection/Exam Process: The person selected will be expected to perform all the functions of the position. Based on a review of the applications and the supplemental applications received, the candidates appearing to be the most qualified and meeting the City's particular needs will be invited in writing to the exam process. A candidate must achieve a passing score on each exam to proceed to the next exam. Exam Information: Panel Oral Interview: 100% The provisions of this announcement do not constitute an expressed or implied contract and any provisions contained in this announcement may be modified or revoked without notice. The City of Whittier is an Equal Opportunity Employer

Local deliveries you are home every night! Pay Rate starting at $25.00 - DOE Come work for a company where you can work in a job that will give you the flexibility you crave! ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Class C Driver • Prepare truck for operation by assisting in and overseeing the loading of trucks, securing of items and verifying the accuracy of shipping papers, • Inspect truck tires, lights, brakes, fluids, etc. to ensure safe and cost-effective performance with preventive maintenance in mind, • Deliver orders via the most effective route to ensure complete orders are delivered according to established time frames and customers' needs, • Maintain communication with company during deliveries to ensure any updated instructions are received, • Document delivery, accuracy and receipt of orders by the customer according to company directives and report any discrepancies to company, • Increase customer satisfaction by collecting information, feedback on service and resolving complaints per company policy; communicate information back to company, • Inform customers of new products and services that can increase customer satisfaction and sales, • Maintain and monitor truck maintenance and driving record requirements, and maintain required documents for safety, security and quality processes, • Update job knowledge, • Safely operate forklifts and other warehouse equipment as required, • Maintain a safe driving record free of violations, • Perform occasional warehouse and counter duties, • Maintain proficiency in computerized systems and other technologies as required, • Follow company policies and procedures, • Other duties as assigned QUALIFICATIONS - Driver • Delivers superior customer service, • Able to read a map and accurately plan a route, • Accuracy and attention to detail, • Professional demeanor, • Able to handle difficult customers with diplomacy and tact, • Capable of following written instructions and documented procedures, • Recognizes and understands product numbers and alpha/numeric codes, • Working knowledge of Department of Transportation (DOT) rules and regulations, • Effective listening, verbal and written communication skills, • Operates forklifts in compliance with Occupational Safety & Health Administration (OSHA) requirements, • Lift/carry/maneuver heavy material or equipment (up to 75lbs), • Pass a drug screen and background check, • Valid driver's license and clean driving record ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Warehouse (when not driving) • Assist in receiving and inspecting incoming items/products. Ensures proper placement of products in the warehouse according to established guidelines and/or instructions from Supervisor., • Pull inventory for stock, inspect and pack products for delivery. Verify inventories, maintain organization of products in the rack base and perform other miscellaneous stocking duties, as requested. Checks order for accurate and proper documentation., • Assist in completing basic paperwork relative to shipping and receiving tasks. This includes preparing necessary documentation regarding weight and freight cost on the order and properly labeling and documenting any hazardous material packages., • Perform janitorial duties as assigned to keep work area clean., • Operate motorized cart/forklift and perform other related job duties, as required or requested by the Company. Qualifications: Warehouse • Requires the ability to read and write in English and to understand numerical and alphabetical sequences., • Requires the ability to complete forms and order parts., • Must be able to lift up to 75 pounds, climb ladders and spend significant periods of time each day in physical labor., • Must be certified as a forklift operator within 60 calendar days of start date., • Requires good skills in the use of tools required to perform assigned job responsibilities. Education and/or Experience: For Warehouse • Prefer a minimum six months-related warehouse experience., • Prefer experience in operating a stock picker and/or forklift., • High school diploma or equivalent, • Distribution industry preferred Physical Demands This work requires the following physical activities: climbing, bending, stooping, kneeling, twisting, reaching, sitting, standing, walking, lifting up to 75 lbs. of material, finger dexterity for activities such as data entry and calculator use, grasping, repetitive motions, speaking, hearing, visual acuity, and mobility between locations. Use of both hands is required. This is a safety sensitive position The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Wurth Louis and Company (WLAC) is an equal opportunity employer and provides reasonable accommodations to employees and applicants with physical and/or mental disabilities. We value and encourage diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This applies to all employment practices within our organization and is based on qualifications, merit, and business needs.

At Waste Connections, we're more than just a waste services companywe're a team that values safety, community, and career growth. Serving communities across the U.S. and Canada, we provide reliable solid waste collection, transfer, disposal, and recycling services. We take pride in being a different kind of company with a culture that empowers employees to grow, lead, and make a real impact. As a Heavy Equipment Operator at our Walnut Landfill, you'll play a key role in maintaining a safe and efficient operation. Your responsibilities will include: • Operating heavy equipment such as bulldozers, wheel loaders, motor graders, scrapers, and compactors., • Performing routine inspections and basic maintenance on equipment., • Promoting and practicing safe work habits and environmental responsibility., • Collaborating with team members and customers to ensure safe and effective service delivery. What We're Looking For: • 2+ years of experience operating heavy equipment., • Solid understanding of equipment operation and maintenance., • Commitment to safety and the ability to follow and enforce safety procedures. What You'll Get: • Competitive Pay, • 401(k) with Company Match Invest in your future with our support., • Comprehensive Benefits Medical, Dental, and Vision coverage., • Employee Perks Including:, • Employee Assistance & Mental Health Programs, • Emergency Travel Assistance, • Prepaid Legal Plan, • Scholarship Opportunities for Children, • Employee Stock Purchase Plan, • Employee Relief Fund, • Insurance Coverage Life, Short-Term, and Long-Term Disability Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status.

The Crane Operator plays a key role in supporting tank construction and repair projects across the United States. This position requires flexibility and a strong willingness to assist with other field responsibilities whenever crane operations are not actively in progress. Supporting the overall crew is an essential function of this role. Job Duties & Responsibilities • Operate and set up cranes according to job requirements and site conditions., • Perform daily equipment and safety inspections., • Move materials around the job site according to plans and schedules., • Monitor crane stability and load weights., • Work with signal personnel and ground crews to maintain safe operations., • Perform minor equipment maintenance and report mechanical concerns promptly., • Maintain accurate records of materials and equipment movement., • Ensure travel and lift paths remain clear and safe., • Assist with additional field responsibilities when crane operations are not in progress, including cleanup, fire watch, confined space attendant duties, and general crew support. Requirements • NCCCO TLL Certification required (additional certifications are a plus)., • Willingness to travel nationwide up to 75% of the time., • Strong communication and organizational skills., • Problem-solving mindset with willingness to suggest improvements., • Excellent attendance and punctuality., • Willingness to learn, adapt, and support the team., • Minimum age of 18 years old., • High school diploma or equivalent., • Must be legally authorized to work in the United States., • Valid driver's license and willingness to authorize MVR checks., • Employment may be contingent upon successful completion of background checks and drug/alcohol testing, where permitted by applicable law., • Willingness to assist in other field roles is a critical requirement of this position., • Welding experience or ability is a plus. Physical & Work Environment Requirements • Ability to work outdoors in varying weather conditions., • Ability to climb ladders and work at heights., • Ability to lift, carry, and move materials consistent with job duties., • Ability to work around heavy equipment and industrial construction environments., • Ability to work extended hours and travel for project assignments as needed. Benefits • Competitive pay with annual reviews, • Health, dental, and vision insurance, • 401(k) with company match, • Strong culture of teamwork, learning, and development, • A workplace where employees are respected, supported, and given opportunities to grow To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer.

The following is a list of typical duties assigned to the City Maintenance Worker - Parks. The duties included on this list are examples and are not intended to be all-inclusive or restrictive. • Assist in the installation and repair of street signage., • Assist in the removal of broken glass and boarding up windows., • Perform and/or assist in basic semi-skilled maintenance and repair work at an entry level in either the plumbing, electrical, painting or carpentry trade areas., • Maintain public areas by collecting and removing trash., • Set up temporary traffic control devices such as cones, signs and barricades as necessary., • Remove graffiti by using solvents, pressure washers or paint., • Paint over or remove graffiti sites by the request of the public or by work order in areas that may include City property and public right-of-way., • Maintains paint brushes, paint pots, spray guns, compressors, and related equipment., • Prepare surfaces for painting and apply finish coverings by using brushes, rollers or spray equipment as necessary., • Load and unload of equipment, tools and/or trash and other products related to duties assigned., • Perform routine preventative maintenance on buildings, city grounds and equipment., • Operate and maintain power hand tools, paint sprayers, pressure washers and other related equipment., • Manage appropriately and wear protective equipment at all times: hard hat, flash lights, safety glasses, gloves, safety boots, dust mask, ear plugs, and respirator., • Keep required records of work performed, be able to plan and lay out assigned tasks., • Provide information to the public regarding NPDES regulations, public safety, graffiti removal services and any other service provided by the city., • Work with community service workers and student workers who assist in removing graffiti; provide technical supervision for these workers., • Perform manual labor and unskilled to semi-skilled concrete work to assist with the construction and/or repair of City sidewalks, curbs, gutter and other concrete related projects., • Perform manual labor and unskilled to semi-skilled construction work and safely utilizes tools and equipment to assist with the construction and repair of City's streets and alleys., • Must be available (ON-CALL) for emergencies., • Inspects assigned City area for safety issues and possible future work projects, and appropriately marks areas that need to be repaired; responds to emergency situations as required., • Operates and maintains specialized vehicles and a variety of light, medium, and heavy equipment related to the construction, maintenance, and repair of parks and grounds, streets, or facilities., • Operates a variety of hand and power tools and equipment related to work assignment as instructed; observes safe work methods and makes appropriate use of related safety equipment., • Repairs and maintains public facilities, shop and garage areas, storage sites, and other work areas in a clean and orderly condition, including securing equipment upon completion of workday., • Monitors City premises for graffiti vandalism; utilizes appropriate chemicals and high-pressure equipment to remove graffiti., • Installs street barricades and cones and controls traffic around work sites, street closures, and special events to ensure safe conditions for the general public and City staff., • Maintains accurate logs and records of work performed and materials and equipment utilized., • Estimates quantities needed and recommended selection of materials, replacements, etc. for respective areas., • Ensures staff compliance with City and mandated safety rules, regulations, and protocols., • Maintains City parks, open spaces and other City areas, mows, edges, weeds lawns, and other landscaped areas., • Plants trees, stakes, and re-stakes trees; prunes, or trims hedges, trees, flowers, and shrubs; performs minor tree surgery work., • Operates stump grinder, chipper, blowers, edgers, hedge trimmers, clippers, sprayers, and other equipment; repairs, installs, and maintains irrigation systems backflow devices, piping and sprinkler heads., • May be required to work different shifts, weekends and/or holidays., • Perform other related duties as assigned. MINIMUM QUALIFICATIONS Education, Training and Experience • Graduation from high school or G.E.D.; AND, • A minimum of one (1) year full-time paid general maintenance experience., • Additional coursework or vocational training in the semi-skilled trades desirable. Licenses, Certificate and/or Special Requirements • A valid California class "C" driver's license, safe driving record, and proof of insurance are required at the time of appointment., • May have a California class "B" driver's License at the time of employment., • May have an Aquatic Facility Operator (AFO) License within one (1) year of employment.

Misfits Market is a mission-driven, high-growth startup dedicated to reducing food waste and making shopping for sustainable, high-quality groceries easier and more affordable. We deliver organic produce, high-quality meats and seafood, plant-based proteins, dairy, bakery, wine, and other grocery items to nearly every zip code in 48 states at up to 30 percent off traditional grocery store prices. In 2022, Misfits Market acquired sustainable e-grocer Imperfect Foods and now leverages its in-house transportation network to deliver directly to consumers with one of the most carbon-efficient grocery delivery models on the market. By tackling inefficiencies in the food system, our passionate and motivated team of problem solvers helps save an average of 500,000 pounds of food per week from waste or lesser outcomes, with an all-time savings of 190+ million pounds of food. As Misfits we support our customers and mission by embracing our core values of: Prioritizing our Customers, Doing more with less, Thinking Differently, Respecting one another, Moving deliberately and quickly, Taking initiative and delivering. We are seeking a skilled and safety-conscious individual to join our team as a Forklift Operator in our fulfillment center. The Forklift Operator will be responsible for operating forklifts and other material handling equipment to move, stack, and organize grocery products within the warehouse. This role requires a strong attention to detail, adherence to safety protocols, and the ability to work effectively in a fast-paced environment. What you will do: • Safely operate forklifts and other material handling equipment to transport grocery products throughout the warehouse, including loading and unloading trucks, moving pallets, and stacking products in designated storage areas., • Assist with inventory counts and cycle counts as needed, ensuring accurate tracking and recording of product movements within the warehouse., • Collaborate with warehouse team members to fulfill customer orders by accurately picking and staging products for shipment, following established procedures and safety guidelines., • Adhere to all company safety protocols and guidelines for forklift operation, including conducting pre-operational checks, wearing appropriate personal protective equipment (PPE), and reporting any safety hazards or incidents to management., • Perform routine maintenance checks on forklifts and other equipment to ensure proper functioning and report any maintenance or repair needs to maintenance personnel., • Communicate effectively with warehouse supervisors and team members to coordinate workflow, prioritize tasks, and address any issues or concerns related to forklift operations. What you have: • High school diploma or equivalent., • Ability to pass internal forklift operator certification., • Minimum of 1 year of experience operating forklifts in a warehouse or similar environment., • Strong understanding of company and OSHA safety protocols and guidelines for forklift operation., • Ability to lift and move heavy objects, as well as stand, bend, and stoop for extended periods., • Excellent attention to detail and organizational skills., • Ability to work independently and as part of a team in a fast-paced environment., • Basic computer skills and familiarity with warehouse management systems (WMS) preferred Physical Requirements: • Comfortable working in a refrigerated environment (36 degrees and below), • Ability to walk, bend, squat, climb, reach, and kneel., • Ability to lift/push/pull up to 50 pounds. Benefits: • Comprehensive medical, dental, and vision insurance, • 401(k), • Annual Misfits grocery box credit of $1200 paid in weekly installments, • Life insurance, • Paid vacation time, • Paid holidays, • Paid sick days, • Commuter benefits, • Hourly Compensation - $19.50/hr., • Schedule - Sunday to Thursday from 2 am to 10:30 am

Bay Cities has an exciting temporary-to-potential-hire opportunity for a Forklift Operator at our manufacturing facility in Pico Rivera, in partnership with a staffing agency. This position is responsible for safely operating a forklift to move finished goods and materials to and from machines and conveyor lines, supplying materials to machine operators, and receiving palletized and non-palletized materials, including bale packs. • Operates forklift in a safe manner., • Completes and documents daily forklift inspection before and after each shift., • Reports any damages or required maintenance work orders to supervisor as needed for repairs., • Delivers appropriate stock to machines before the start of the run and during the shift, • Removes all finish goods from machines and conveyor lines., • Maintains orderly, neat, and safe stacks of stock in storage areas., • Completes all necessary paperwork in an accurate and timely manner., • Records all stock material on computer and delivery receipt., • Maximizes the utilization of equipment by operating the machinery safely at available capacity and speed., • Adheres to daily production schedule., • Provides pallet counts, dimensions and weights as requested., • Ensures all product is properly stacked and stored., • Assists other forklift operators as needed., • Secures loaded materials for transportation., • Reports any arising issues immediately to Supervisor., • Photographs all outside carrier pick-ups for record keeping., • Scans merchandise when being moved from one location to another., • Changes propane tanks when needed., • Ensures the compliance of safety guidelines., • Wears the proper safety equipment for the environment including safety glasses and steel toe shoes., • Maneuvers materials with and without pallets with accuracy and efficiency., • Manages housekeeping by ensuring all scrap materials are taken to the baler as well as cleanliness and straightness of on hand stock and materials., • Performs other related duties as needed., • High School diploma/GED required, • Must have ability to see and differential color, • Use of computer skills, • Strong organizational & communication skills: Writing, Speaking, Reading, • Ability to recommend and implement customer solutions to drive top and bottom-line improvement., • Ability to handle multiple projects within a fast pace work environment., • Valid Driver's License with DMV evidence of good driving record., • Interpersonal skills and ability to manage multiple duties in a rapidly changing environment. Able to read and follow instructions on factory masters. Bilingual English/Spanish a plus. Ability to apply and carry out instructions furnished in written, oral, or graphic form. Capable to deal with problems involving one or more concrete variables in standardized situations. The individual must have a working knowledge of the following: • Able to operate a sit-down propane forklift, • Able to distinguish various paper flutes and grades, • Able to type on a keyboard with speed and accuracy, • Read tape measure with speed and accuracy, • Calculate figures and amounts such as percentages, measurement, volume and rate, • Apply concepts of high school math, • Equipment design and capabilities that can be translated into efficient operation., • Product layouts and production specifications., • Meet quality standards, • While performing the duties of this job, the employee is regularly required to stand, walk, talk and hear. The employee is required to stand for long periods of time go up/down step ladders, stairs and elevating platforms. The employee frequently is required to use their hands and arms, and stoop, kneel, crouch, or crawl. The employee must be able to perform repetitive motions and must have strong finger dexterity. Employee must be able to sit for extended period of time., • The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds utilizing the buddy system. Specific vision abilities required for this job include close, distance, peripheral and color vision, depth perception, and ability to adjust focus., • While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually loud. The employee works around powered industrial trucks, heavy objects, conveyor systems, and machines including highly energized systems such as pneumatic and electrical systems. The employee works with chemicals, high heat items, and sharp objects. The employee uses pneumatic systems including air and water hoses. The employee must be able to adapt to a changing work environment., • We employ all persons who are legally authorized to work in the U.S. (U.S. Citizens, lawful permanent residents, refugee or asylee- all require proper identification and documentation)., • Pre-Employment Verifications: Must pass background and reference checks, drug screen, and physical examination prior to employment., • In accordance with our company's duty to provide and maintain a workplace that is free of known hazards, all employees are required to provide proof of their full vaccination status for COVID-19. If the applicant has not been fully vaccinated, they may request an accommodation for religious or medical reasons if they submit the proper form and turn it in with proper documentation. If the exemption is approved, the employee must submit to weekly COVID testing as a condition of employment. If you are not willing to be fully vaccinated and/or submit to weekly testing if your request for an accommodation is approved, you are not eligible for hire., • Bay Cities Corporation is an Equal Opportunity Employer. M/F/D/V

Hot Job Los Angeles, CA 90027 Salary Range $22.00 - $35.00 Hourly Position Type Seasonal Set-up and Strike Crew Seasonal Los Angeles CA | Seasonal | Setup Aug - Sep and Strike Nov Thirteenth Floor Entertainment Group is the nation's leading creator of immersive, story-driven entertainmentand proudly the world's largest operator of Halloween attractions. With eighteen markets spanning Florida to California and millions of guests thrilled each year, we don't just produce events. We redefine what's possible. Headquartered in Denver and powered by a team of fearless creators, we've built a culture where curiosity, collaboration, and a relentless drive to go beyond expectations are the standardnot the exception. When you join Thirteenth Floor, you're not just taking a job. You're stepping into the magic behind the screams. Returning applicants: If you have worked for Thirteenth Floor Entertainment Group in a prior season, please contact your location manager directly regarding rehire status. Do not submit a new application through the online system. We're hiring across three skill tiersapply for the level that matches your experience: $21hr - $25hr based on experience and certification • Crew Manager Oversee daily crew operations, supervise all tiers, coordinate with production leads, • Carpenter Structural and finish carpentry, custom fabrication, scenic builds, • Builder / Forklift Operator Structural construction, heavy equipment operation, • Painter / Scenic Artist Scenic painting, themed fabrication, artistic finishing, • Helper / Runner General labor, material handling, site support Please indicate in your application which classification you are applying for. As part of our Seasonal Setup & Strike Crew, you're the team that makes the magic physically possible. From first hammer swing to final load-out, you'll build, maintain, and dismantle the immersive environments that define the Thirteenth Floor experience. This work is hands-on, fast-paced, and essential. Event Build & Setup • Assist with construction, assembly, and installation of scenic elements, props, and event infrastructure, • Build and install immersive themed environments and haunted attraction components, • Load, unload, move, and organize materials, tools, and equipment across the site Manual Labor & Site Operations • Perform physical labor including lifting, carrying, staging, and positioning materials up to 50 lbs, • Maintain clean, organized, and hazard-free work areas throughout the build and operational season, • Support daily site readiness and setup needs as directed by supervisors Tools, Equipment & Safety • Safely operate hand tools, power tools, and basic equipment as trained and authorized, • Follow all safety procedures and supervisor direction without exception, • Contribute to a culture of safety, accountability, and mutual respect on site Collaboration & Execution • Work closely with supervisors, carpenters, scenic artists, and operations teams to execute tasks on time, • Adapt quickly to shifting priorities, tight deadlines, and evolving project needs Strike, Storage & Maintenance • Clean, inspect, repair, and organize event equipment including tents, tables, AV, props, and signage, • Support storage organization, inventory tracking, and trailer loading/unloading post-season, • Perform basic groundskeeping and support minor repairs and touch-up work on site infrastructure, • Reliable, punctual, and brings a strong work ethic every shift, • Comfortable performing sustained physical labor outdoors in varying weather conditions, • Able to follow instructions clearly and work effectively as part of a crew, • Willing to learn tools, equipment, and build techniques on the job, • Previous experience in construction, general labor, events, or haunted attractions is a plusbut not required, • Must be 18 years of age or older Hourly Rate: $22hr - $35hr based on experience and certification Employment Type: Seasonal/Temporary Expected Season Duration: Setup Aug - Sep and Strike Nov Work Schedule: Evenings, weekends, and holidays required during operational season This is a seasonal/temporary position with an anticipated end date. Employment beyond the stated season is not guaranteed. Pursuant to California SB 1162, the hourly pay rate for this position is listed above. Thirteenth Floor Entertainment Group will not request or consider salary history in making compensation decisions. Thirteenth Floor Entertainment Group participates in E-Verify. As required by federal law, we will verify the identity and employment eligibility of all hired individuals. Thirteenth Floor Entertainment Group is an equal opportunity employer and complies with all applicable federal, state, and local employment laws, including the California Fair Employment and Housing Act (FEHA). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, disability, medical condition, genetic information, marital status, military or veteran status, age, or any other characteristic protected by law. Thirteenth Floor Entertainment Group will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act (AB 1008). You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made. Applicants with disabilities may request reasonable accommodations at any point in the hiring process by contacting hr@thirteenthfloor.com Pursuant to the California Consumer Privacy Act (CCPA), applicants are entitled to know what personal information is collected during the hiring process and how it is used. To review our Applicant Privacy Notice, visit [link] or contact HR at the email above. Applicant Privacy Notice California Residents In connection with your application for employment, Thirteenth Floor Entertainment Group ("TFEG") collects personal information about applicants as permitted and required by law. The categories of personal information we may collect include: identifiers (such as name, address, email, and phone number); professional and employment-related information (such as work history, references, and qualifications); education information; and background check information where applicable and permitted. This information is collected for the purpose of evaluating your candidacy, processing your application, and fulfilling our legal obligations as an employer. We do not sell applicants' personal information. Personal information collected during the hiring process is retained in accordance with applicable law and our internal data retention policies. If you have questions about how your personal information is collected or used, please contact Human Resources at hr@thirteenthfloor.com.

Job DescriptionCompany Description Admin Service Inc is the HR and Administrative Service Provider for one of the largest recycled paper exporter and its business partners. Job Description Join our dynamic team at our yard in Long Beach, United States, as a Forklift Driver! We're seeking an efficient and detail-oriented individual to play a crucial role in our daily operations. • Operate forklifts safely and efficiently to move, load, and unload materials within the recycling yard, • Accurately sort and organize recyclable materials according to established procedures, • Perform basic maintenance checks on forklifts and report any issues to supervisors, • Adhere to all safety regulations and maintain a clean, organized work environment, • Collaborate with team members to ensure smooth operations and meet daily goals, • Assist with loading dock operations as needed, • Maintain accurate records of materials moved and processed, • Participate in regular safety training and meetingsQualifications, • Valid forklift certification preferred but subject to complete a forklift skills assessment., • Previous experience as a forklift operator in a recycling or industrial setting, • Demonstrated knowledge of safety procedures and regulations, • Ability to perform basic maintenance on equipment, • High school diploma or equivalent, • Valid driver's license, • Physical ability to lift and move heavy items regularly, • Strong attention to detail and ability to follow instructions accurately, • Excellent teamwork and communication skills, • Knowledge of recycling industry practices (preferred), • Loading dock experience (a plus), • Flexibility to work various shifts as needed, • Commitment to environmental sustainability and recycling practices Additional Information Pay starts at $19/hour.

Job Description Forklift/Machine Operator Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of açaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit www.generousbrands.com. JOB TITLE: Forklift Operator LOCATION: Buena Park, CA DEPARTMENT: HA Warehouse SALARY GRADE: Hourly REPORTS TO: Shift Supervisor FLSA CLASSIFICATION: Non-Exempt JOB DESCRIPTION: The Forklift Operator operates powered stand-up or sit-down forklifts and rider single or double pallet jack equipment. Utilizing the lifts obtain, transport and deposit products/ materials within the warehouse, including multi-level racking locations. Build pallets physically and systematically to fulfill customer orders with special attention to customer-specific handling requirements. Load and unload reefer and dry trailers. All physical movement of products/ materials, including building of pallets must be done utilizing the WMS or ERP systems so that inventory is maintained, and transactions are recorded. Products are perishable, must follow proper date rotation and maintain awareness of product condition and inventory status. JOB DUTIES: • Conduct pre-inspection of equipment prior to use to ensure it is safe to operate; do not operate unsafe equipment., • Maintain work area in an organized and clean manner ensuring safety and adherence to Good Manufacturing Practices (GMPs), • Contribute positively to the team by ensuring all aspects of the job are handled appropriately and professionally. Help others when needed and maintain a positive, can-do attitude., • Use radio frequency (RF) scan gun equipment to facilitate completion of directed and undirected work through the Warehouse Management System (WMS)., • Responsible for physically rotating materials to ensure use is based on first in/expiration, first out (FIFO/FEFO), • Receive, put away, move, consolidate, and obtain inventory using powered equipment and WMS., • Pick/assemble pallets for customer shipments ensuring product is stacked appropriately, and that any customer handling requests are followed., • Load and unload reefer and dry trailers., • Perform location cycle counts and audits, • Complete and maintain quality, inventory, and other job-related documentation, • Adhere to and support company regulations and policies, • Assist with cleaning up and disposal of trash and recycling into dumpsters and roll-offs., • Other duties as assigned. REQUIRED SKILLS AND ABILITIES: • Must have certification in operating powered forklifts., • Able to perform basic mathematical skills (such as adding and subtracting), • Able to read and write in English or Spanish and communicate effectively., • Able to interpret safety, operating and maintenance documents., • Able to write/ fill out routine reports and simple correspondence., • Able to work the scheduled/assigned times and overtime as required., • Able to work as a team and follow instructions., • Able to meet or beat all performance standards., • Able to maintain a positive attitude and contribute to a positive work environment. MINIMUM QUALIFICATIONS: • High School Diploma, GED, or graduation from an accredited trade school, and a minimum of 2 year of full-time forklift operating experience, or equivalent combination of education and experience., • Previous experience using a warehouse management or inventory system, which includes RF scan guns. PREFERRED QUALIFICATIONS: • Previous experience using a warehouse management or inventory system, which includes RF scan guns. PHYSICAL DEMANDS & ENVIRONMENTAL HAZARDS: • Consistent exposure to cold temperatures (34°ree; F degrees) and occasional sub-zero temperatures (-10°ree; F) or work outdoors., • Must be able to reach and/or extend arms in a repetitive manner for a long period of time., • Must be able to safely lift 50-60 pounds consistently., • Must be able to stand and walk for extended periods of time., • Must be able to push, pull, and move heavy and bulky items in a repetitive manner. HOURS & WORKDAYS: • 3rd Shift – (10:00pm to 6:30am); Weekends, overtime, holiday, and rotating day/shift schedules will be mandatory based on business and department needs. 3rd Shift - 10:00pm to 6:30am; Weekends, overtime, holidays, and rotating schedules may be mandatory based on business/department needs.

Job Description We are seeking a skilled and reliable Forklift Operator to join our warehouse team. The ideal candidate will have experience operating warehouse equipment, including pallet jacks, forklifts, and clamp trucks, to efficiently load, unload, and organize materials. This role is vital for maintaining smooth warehouse operations, ensuring safety compliance, and supporting order fulfillment processes. Candidates with a background in warehouse distribution, shipping & receiving, or heavy equipment operation are encouraged to apply. A strong understanding of OSHA standards and mechanical knowledge is preferred to promote a safe working environment. • 2nd shift, • Monday - Friday and Saturdays if needed, • Start time: 3:30 pm, • 10-12 hour shifts - Overtime mandatory, • Pay rate: $20.50 an hour, • Must have experience with Stand up reach forklift, Sit-down Forklift, Rider EPJ and Sit down forklift., • Temp to hire position, • #Azusa Responsibilities • Operate pallet jacks, stand up reach forklifts, clamp trucks, and other heavy equipment safely and efficiently to load and unload materials., • Assist with order picking using RF scanners and warehouse management systems to ensure accurate inventory control., • Load and unload shipments, ensuring proper handling of goods to prevent damage., • Support shipping & receiving activities by organizing products for shipment or storage., • Maintain a clean and organized work area adhering to OSHA safety standards., • Collaborate with warehouse supervisors and team members to meet daily operational goals., • Perform routine inspections on equipment and report any mechanical issues promptly., • Assist in materials handling tasks such as stacking, sorting, and moving inventory within the warehouse. Qualifications • Previous experience in warehouse distribution or shipping & receiving preferred., • Valid certification or experience operating pallet jacks, forklifts, crane, or clamp trucks., • Knowledge of OSHA safety regulations related to heavy equipment operation and materials handling., • Mechanical aptitude and familiarity with warehouse management systems (WMS)., • Ability to perform heavy lifting safely and efficiently., • Experience with RF scanners for order picking is a plus., • Strong attention to detail with excellent organizational skills., • Prior warehouse supervisor or construction experience is advantageous but not required., • Ability to work in a fast-paced environment while maintaining safety standards. This position offers an opportunity to contribute significantly to our warehouse operations while developing your skills in heavy equipment operation and materials handling within a professional environment.\nCompany Description Specializing in the placement of professionals in the logistics & manufacturing world, People First Employment can help you find the job you need to get to the next level! Our goal is to help you with all of your individual needs and give you amazing customer service because we do care about you, hence our company name- People First Employment. Specializing in the placement of professionals in the logistics & manufacturing world, People First Employment can help you find the job you need to get to the next level! Our goal is to help you with all of your individual needs and give you amazing customer service because we do care about you, hence our company name- People First Employment.

Job DescriptionDescription: About Us InfoSend, Inc. is a trusted provider of secure, data-driven customer communications and technology solutions. We partner with organizations across various industries to deliver reliable, compliant, and innovative communication services that help our clients connect with their customers effectively. At InfoSend, we believe our success starts with our people. We are committed to fostering a supportive workplace culture that values collaboration, professional growth, and work/life balance. Job Summary We are seeking a proactive and detail-oriented Mail Inserter Maintenance Mechanic to join our dynamic team. In this role, you will be responsible for maintaining and repairing mail inserting machines and related equipment to ensure smooth, efficient operations. Your expertise will help keep our mailing processes running seamlessly, supporting timely delivery and operational excellence. This position offers an exciting opportunity to apply your mechanical skills in a fast-paced environment dedicated to precision and quality. Schedule: Monday-Friday 11:00am - 7:30pm Key Responsibilities • Primary person responsible for scheduling and performing repair work on Bell & Howell, Pitney Bowes, Rival, and MPS machines, MBO folders, inserting equipment, and all equipment associated within the mailing operation (such as strapping machines, stream feeders, Pitney Bowes meter bases, guillotine cutter machines), • Responsible for inventory and ordering when manager is not on site for commonly used service parts, • Provide backup support as a Mail Operator as requested by management, as needed when workload is excessive or are shorthanded on Operators during peak production periods, • Provide support by managing parts inventory and customer service calls, • Perform scheduled preventative maintenance on the Bell & Howell systems, Pitney Bowes, Rival and MPS machines to keep them functioning in optimal condition, • Schedule and perform regular predictive/preventative maintenance inspections on equipment on other Third-Party equipment, • Flexibility to support other areas of mailing Department (UV coating, Bindery Departments, • Other duties as assigned. Qualifications: • 3 years’ experience running or repairing mailing equipment, • 3 years’ experience working in a transactional mail environment, • Knowledge of Bell and Howell and Pitney Bowes machines and tools, including their designs, uses, repair, and maintenance, • Ability to perform mechanical adjustments/repairs on mailing equipment, • Ability to handle multiple tasks in a fast-paced environment, • Ability to process, comprehend and follow detailed instructions, • Ability to communicate effectively both verbally and in writing, • Outstanding attention to detail and ability to inspect work on problem areas, • Ability to stand for extended periods of time and to frequently lift and move heavy materials (about 40-45 pounds), • Must be flexible with hours including working various shifts, overtime, and some Saturday work may be required, • Must be highly organized and efficient, • Ability to take initiative, be self-motivated and work independently Benefits & Work Environment • Medical, dental, vision, and supplemental insurance, • Paid Time Off (PTO), sick time, and paid holidays, • Quarterly bonus opportunities, • 401k with employer match, • Monday through Friday schedule, • Casual business attire—jeans are welcome, • Supportive, people-focused culture with growth opportunitiesRequirements:

Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of aa in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. Job Title: Forklift Operator Location: Buena Park, CA Department: HA Warehouse Salary Grade: Hourly Reports To: Shift Supervisor FLSA Classification: Non-Exempt Job Description: The Forklift Operator operates powered stand-up or sit-down forklifts and rider single or double pallet jack equipment. Utilizing the lifts obtain, transport and deposit products/materials within the warehouse, including multi-level racking locations. Build pallets physically and systematically to fulfill customer orders with special attention to customer-specific handling requirements. Load and unload reefer and dry trailers. All physical movement of products/materials, including building of pallets must be done utilizing the WMS or ERP systems so that inventory is maintained, and transactions are recorded. Products are perishable, must follow proper date rotation and maintain awareness of product condition and inventory status. Job Duties: • Conduct pre-inspection of equipment prior to use to ensure it is safe to operate; do not operate unsafe equipment., • Maintain work area in an organized and clean manner ensuring safety and adherence to Good Manufacturing Practices (GMPs), • Contribute positively to the team by ensuring all aspects of the job are handled appropriately and professionally. Help others when needed and maintain a positive, can-do attitude., • Use radio frequency (RF) scan gun equipment to facilitate completion of directed and undirected work through the Warehouse Management System (WMS)., • Responsible for physically rotating materials to ensure use is based on first in/expiration, first out (FIFO/FEFO), • Receive, put away, move, consolidate, and obtain inventory using powered equipment and WMS., • Pick/assemble pallets for customer shipments ensuring product is stacked appropriately, and that any customer handling requests are followed., • Load and unload reefer and dry trailers., • Perform location cycle counts and audits, • Complete and maintain quality, inventory, and other job-related documentation, • Adhere to and support company regulations and policies, • Assist with cleaning up and disposal of trash and recycling into dumpsters and roll-offs., • Other duties as assigned. Required Skills and Abilities: • Must have certification in operating powered forklifts., • Able to perform basic mathematical skills (such as adding and subtracting), • Able to read and write in English or Spanish and communicate effectively., • Able to interpret safety, operating and maintenance documents., • Able to write/ fill out routine reports and simple correspondence., • Able to work the scheduled/assigned times and overtime as required., • Able to work as a team and follow instructions., • Able to meet or beat all performance standards., • Able to maintain a positive attitude and contribute to a positive work environment. Minimum Qualifications: • High School Diploma, GED, or graduation from an accredited trade school, and a minimum of 2 year of full-time forklift operating experience, or equivalent combination of education and experience., • Previous experience using a warehouse management or inventory system, which includes RF scan guns. Preferred Qualifications: • Previous experience using a warehouse management or inventory system, which includes RF scan guns. Physical Demands & Environmental Hazards: • Consistent exposure to cold temperatures (34 F degrees) and occasional sub-zero temperatures (-10 F) or work outdoors., • Must be able to reach and/or extend arms in a repetitive manner for a long period of time., • Must be able to safely lift 50-60 pounds consistently., • Must be able to stand and walk for extended periods of time., • Must be able to push, pull, and move heavy and bulky items in a repetitive manner. Hours & Workdays: • 3rd Shift (10:00pm to 6:30am); Weekends, overtime, holiday, and rotating day/shift schedules will be mandatory based on business and department needs.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now ! Maintenance Mechanic Department: Maintenance Department/ Area: Maintenance Position Summary: Maintenance Mechanic will manage and troubleshoot the day-to-day maintenance needs of all equipment and machinery. Responsibilities include maintenance and repair of manufacturing equipment such as such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment using hand tools, power tools, and precision-measuring and testing instruments. The Maintenance Mechanic Operator will observe mechanical devices in operation and listens to their sounds to locate causes of trouble. Dismantles devices to gain access to and remove defective parts using hoists, cranes, scissor lifts, forklifts, hand tools, welding, and power tools. Repairs or replaces defective parts, using hand tools and power tools, etc. Installs special functional and structural parts in devices, using hand tools and power tools. May set up and operate a lathe, drill press, grinder, and other metalworking tools to make and repair parts. May initiate purchase order for parts and machines. Minimum Qualifications: · High School graduate or equivalent. · 3+ years of maintenance experience manufacturing environment performing mechanical, pneumatic, hydraulic, minor electrical. · Knowledge of electric motors, generators, pumps, pressure systems, water systems and other equipment and systems found in fastener manufacturing facilities · Knowledge of the occupational hazards and safety precautions of the building maintenance trades. · Knowledge of the proper use of chemicals. Ability to do routine mechanical or electrical maintenance and care for tools and equipment. · Ability to work from sketches, drawings, and blueprints. Ability to maintain records regarding material, equipment, and repairs. Reporting Relationships: Will report to the Maintenance Manager Working Conditions: First shift position. Standing stooping, bending, squatting, and sitting, walking both inside and outside. Some warm weather conditions, some cold weather conditions depending upon seasons. The job duties require an employee to bend, reach, kneel, and stand for extended periods. The job duties may require an employee to climb ladders. The job duties may require an employee to move heavy objects. Position type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. \nCompany Description MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits. MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\nhttps://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD\r\nReference Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Singularity is an Aerospace & Defense startup headquartered in El Segundo, CA. Our founding team hails from SpaceX, Anduril, Northrop, ABL and Lockheed Martin, and we are backed by Joint Staff-level military leadership and top-tier Silicon Valley rms. We're assembling a high-agency team committed to moving fast, solving hard problems, and defending what matters most. With a world-class business development & leadership team already in place, we are well positioned to capitalize on already overwhelming demand. We are seeking an experienced Drone Pilot / UAS Test Operator to support the flying, development, testing, and evaluation of next-generation high-speed aerial targets and autonomous flight systems. You will fly a wide range of remotely-piloted vehiclesfrom high-speed RC jets to low-speed target drones, heavy-lift quadcopters, and custom R&D platforms. This role is hands-on and mission-critical; you will be directly involved in preparing aircraft, executing flight operations, and supporting autopilot tuning and integration efforts (ArduPilot/ArduPlane/ArduCopter). You will work closely with flight software, GNC, mechanical, and systems engineering teams to ensure safe and reliable flight test execution across multiple development programs. Responsibilities: • Travel: The role will be split between El Segundo and trips to the Mojave desert for testing. Flight Operations • Pilot high-performance RC jets, fixed-wing target drones, and multirotor systems during ground and flight testing., • Execute pre-flight, post-flight, and safety checklists with discipline., • Maintain positive control of aircraft during nominal flights and during upset or emergency scenarios., • Provide real-time feedback to engineering teams regarding aircraft behavior, anomalies, or flight envelope limitations. Aircraft Preparation & Maintenance • Assist with aircraft assembly, configuration, repair, and rapid turnaround., • Set up radios, transmitters, telemetry, FPV links, batteries, propulsion systems, and safety systems., • Ensure airframes and propulsion systems are field-ready and meet test requirements. Autopilot Development Support • Support flight software and GNC engineers with ArduPilot-based integrations (ArduPlane, ArduCopter, Mission Planner, QGC, etc.)., • Perform manual flight testing to characterize aircraft dynamics prior to autopilot engagement., • Assist with tuning PID loops, navigation parameters, launch parameters, and failsafes., • Help review logs and flight data to identify tuning needs or hardware issues. Test & Operations Support • Contribute to test card creation, range coordination, and safe test execution., • Operate ground control stations, RF links, and telemetry systems during tests., • Participate in risk reviews, safety briefings, and incident analysis., • Support field operations including setup, teardown, and transportation of equipment. Required Qualifications • 3+ years experience flying RC aircraft, drones, or UAS (fixed-wing + multirotor)., • Demonstrated skill flying high-performance or high-speed aircraft (EDF jets, turbine jets, or equivalent)., • Experience with RC transmitters, flight modes, failsafes, and standard radio protocols., • Ability to diagnose and repair basic airframe, propulsion, and avionics issues under time pressure., • Familiarity with ArduPilot, Mission Planner, QGroundControl, or similar autopilot ecosystems., • Strong situational awareness and disciplined safety mindset., • Ability to travel for flight tests and work in outdoor environments. Preferred Qualifications • Experience flying large/heavy-lift multi-rotors or hybrid VTOL systems., • Experience tuning ArduPilot, PX4, Betaflight, or other autopilot systems., • Familiarity with autonomous flight testing and data review (logs, telemetry, onboard captures)., • Experience with high-speed FPV, long-range links, or high-G maneuvering aircraft., • FAA Part 107 certification., • Background in aerospace, robotics, or mechanical/electrical engineering.

ArtCenter College of Design is searching for an experienced Facilities Systems Technician to join our team. The salary range for this position: $42.00 - 55.00 per hour. Salary Disclaimer: The official salary range for this position is the range posted on the ArtCenter College of Design Careers website. ArtCenter is not responsible for inaccurate or unauthorized salary information published by third-party job boards. Hourly positions are based on a 35 hour work week. Finalsalary is based on education, experience, skills relevant to therole, and internal equity. About ArtCenter Foundedin 1930 and located in Pasadena, California, ArtCenter College of Design is a globalleader in art and design education and has had an international reputation forits rigorous, transdisciplinary curriculum, faculty of professionals, strongties to industry, and commitment to socially responsible design. ArtCenter is aprivate nonprofit fully accredited by the WASC Senior College and UniversityCommission (WSCUC). Every position atArtCenter plays an important part in carrying out the cultural values, goals,strategic vision, and mission of the College. This includes upholding andcultivating an inclusive, respectful, and welcoming environment where everyonefeels a sense of belonging. Facilities Systems Technicians are responsible for the operation, maintenance, troubleshooting, repair, and optimization of critical building systems across all ArtCenter facilities. This position performs advanced diagnostics and repairs on HVAC, electrical, plumbing, Building Management Systems (BMS), energy management systems, controls, and associated infrastructure. This is a full-time position with a schedule of Monday through Friday, 7:00 to 3:00 p.m., subject to change with department needs. The position is primarily based at Hillside Campus and will rotate shifts with staff at South Campus. This position is to be performed on-site as a condition of employment. Work is performed primarily in a shop setting with frequent interruptions and distractions; extended periods of time using shop equipment including computers, viewing computer monitors, hand tools, saws, power tools etc.; interactions with other individuals. Due to the nature of the work environment, there is exposure to loud noises, chemicals, fumes, dust and heat with the HVAC equipment such as compressors and exhaust fans while utilizing issued safety equipment. This position may also require occasional exposure to outdoor environments, including extreme weather conditions. Essential Functions Building Systems Operations and Maintenance - 75% • Provide complete and timely service on assigned tasks and work orders, which are received verbally, written or via electronic devices, • Troubleshoot and repair HVAC equipment including air handlers, split systems, chillers, boilers, cooling towers and exhaust systems., • Diagnose electrical issues involving motors, relays contactors VFDs and electrical distribution equipment. Provide complete and timely service on assigned tasks and work orders, which are received verbally, written or via electronic devices, • Perform advanced troubleshooting of Building Management Systems (BMS), • Analyze building control sequences and identify operational deficiencies, • Troubleshoot temperature, humidity, pressure and airflow issues, • Perform preventive maintenance on critical infrastructure systems, • Monitor system performance and identify opportunities for optimization and energy savings, • Coordinate and support life safety, fire alarm, and emergency power system testing, • Respond to complex system failures and emergency calls, • Document repairs and root cause finding, • Update preventative maintenance procedures, • Operate forklift, grounds vehicles, power tools, hand tools and related equipment to complete repairs, • Work with the Lead Facilities Mechanic to coordinate and escalate maintenance repairs that cannot be performed internally due to skill, licensing, or resource requirements, • Follow all College policies including safety protocols Technical Support and Project Work - 15%, • Serve as technical resource for Facilities Mechanics and Lead Facilities Mechanic, • Train staff on building systems and troubleshooting practices, • Participate in commissioning and startup of new equipment, • Assist with equipment replacements projects, • Recommend repairs and upgrades and replacement strategies Other - 10%, • Assist with regulatory compliance inspections, • Maintain system documentation and as-built information, • Other duties as assigned Required Qualifications:, • Associate degree or technical certification in HVAC, Electrical Technology, Building Automation, Industrial Maintenance or equivalent experience in related fields, • 5 years of progressively responsible experience in commercial, higher education or industrial facilities maintenance, with experience troubleshooting and repairing complex building systems., • Possess a valid California Driver License and maintain an acceptable driving record., • Advanced knowledge of HVAC, electrical, plumbing, mechanical, and building automation systems., • Experience troubleshooting and repairing commercial HVAC equipment, including air handling units, package units, split systems, pumps, exhaust systems, and associated controls., • Experience using Building Management Systems (BMS) and/or Building Automation Systems (BAS) for monitoring, diagnostics, scheduling, alarming, and system optimization., • Experience troubleshooting electrical systems, including motors, relays, contactors, transformers, variable frequency drives (VFDs), and low-voltage control systems., • Ability to read and interpret blueprints, mechanical drawings, electrical schematics, control diagrams, sequence of operations, and technical manuals., • Experience utilizing Computerized Maintenance Management Systems (CMMS) to document work orders, preventive maintenance activities, and asset records., • Knowledge of safe work practices, proper use of hand and power tools, and general building maintenance procedures., • Ability to independently diagnose building system failures and determine appropriate corrective actions., • Ability and willingness to work in confined spaces, at heights, outdoors, and to lift and carry up to 50 pounds., • Flexible to work evenings, weekends, and respond to emergency repair situations and campus operational needs as required., • Strong customer service, communication, organizational, and problem-solving skills., • Ability to prioritize workload, manage multiple assignments, and perform work with minimal supervision., • Ability to establish and maintain effective working relationships with faculty, staff, students, vendors, and contractors., • Ability to read, write, and communicate effectively in English to interact with students, faculty, staff, vendors, and contractors., • Demonstrated commitment to diversity, equity, inclusion, access, and belonging Preferred Qualifications, • Certification in EPA Universal, HVAC, OSHA 10 or 30, and or Building Operator, • Building Automated Systems training and/or certification Physical Demands and Working Environment The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. This is a full-time position with a schedule of Monday through Friday, 7:00 to 3:00 p.m., subject to change with department needs. The position is primarily based at Hillside Campus and will rotate shifts with staff at South Campus. This position is to be performed on-site as a condition of employment. Environment: Work is performed primarily in a shop setting with frequent interruptions and distractions; extended periods of time using shop equipment including computers, viewing computer monitors, hand tools, saws, power tools etc.; interactions with other individuals. Due to the nature of the work environment, there is exposure to loud noises, chemicals, fumes, dust and heat with the HVAC equipment such as compressors and exhaust fans while utilizing issued safety equipment. This position may also require occasional exposure to outdoor environments, including extreme weather conditions. Physical: Primary functions require sufficient physical ability and mobility to work in an shop setting; to stand or walk for prolonged periods of time; including, bending, kneeling, crouching, reaching, squatting, and twisting; to lift, carry, push, and/or pull moderate to heavy amounts of weight (50 pounds, or team-lift up to 100 pounds); to operate office and shop equipment requiring repetitive hand movement and fine coordination, handle or feel objects, tools or controls; and to verbally communicate to exchange information. Vision: Must be able to have the visual capacity to perform activities such as preparing and reading reports, viewing a computer terminal and other normal office work with or without correction. Hearing: Must be able to communicate effectively in the course of normal office communication or exchange ideas with or without correction. Diversity Statement ArtCenter is fully committed to fostering a culture that values diversity, equity, inclusion, access and belonging not only in vision but in practice. Our path forward is predicated on our belief that multiple points of view, life experiences, ethnicities, cultures and belief systems are essential to academic and creative excellence. We strive to learn more about difference while respecting the rich diversity in our world, attending to important questions about racial injustice and decolonizing our curriculum. Our campus environment must be vigilant in supporting the full participation of students, faculty, and staff of every race, color, ethnicity, sex, gender, gender identity or expression, marital status, religion, sexual orientation, age, disability, veteran status, socioeconomic status and political viewpoint. Equal Opportunity EmployerArtCenter is committed to a policy of equalemployment opportunity and does not discriminate against its employees orapplicants on the basis of race (including hair texture and protectivehairstyle), color, religion (includes religious dress and grooming practices),sex/gender (includes pregnancy, childbirth, breastfeeding, and/or relatedmedical conditions), gender identity, gender expression, sexual orientation, maritalstatus, medical condition (genetic characteristics, cancer, or a record orhistory of cancer), military or veteran status, national origin, ancestry,disability (mental and physical, including HIV/AIDS, cancer, and geneticcharacteristics), genetic information, request for family care or medicalleave, age (over 40), criminal background (Fair Chance Act), reproductivehealth decision-making, off-duty and off-premisescannabis use, or any other actual or perceived characteristic protected byapplicable state or federal law. Equal employment opportunity is extended toall persons in all aspects of the employer-employee relationship, includingwithout limitation, recruitment, hiring, upgrading, learning and professionaldevelopment, promotion, compensation, benefits, leave of absence, transfer,discipline, layoff, recall and termination. This commitment applies to allpersons involved in the operations of ArtCenter and prohibits unlawfuldiscrimination by any employee of ArtCenter. Applicants who wish to request an accommodation for a disability may contact the Office of Employee Experience and Engagement at (626) 396-2470. Applicant Rights (Prior Cannabis Use) ArtCenterwill not request information from an applicant relating to the applicant'sprior use of cannabis. ArtCenter will not use information obtained from acriminal history about an applicant or employee's prior cannabis use, unlessArtCenter is permitted to consider that information under applicable law. Employment At-Will All employment with ArtCenter is for anunspecified term and is "at-will." Employees are free to resign at any time,with or without reason, and with or without prior notice. Similarly, ArtCenterhas the right to terminate the employment relationship at any time, with orwithout cause, and with or without prior notice. This "at-will" employment,which includes the College's right to transfer, discipline, demote, or changethe conditions of employment with or without cause and with or without priornotice, cannot be modified, amended orwaived by any oral or implied agreement, and may be modified or altered only byan express individualized written employment agreement signed by both theemployee and the College president ArtCenter Employees have a Mandatory Duty to Report All employees who know or have reason to know of allegations or acts that violate ArtCenter's Title IX Policy prohibiting discrimination, harassment, retaliation, sexual harassment, sexual misconduct, sexual violence, dating violence, and stalking shall promptly inform the , Title IX Administrator/Coordinator or designee, or the Dean of Students or designee. Faculty, who have a mandatory duty to report, are required to disclose all information including the names of the parties, even where the person has requested their name remain confidential. Pursuant to the California Child Abuse and Neglect Reporting Act (CANRA), all employees who know of or have reason to suspect child abuse or neglect involving alleged victims under age 18 shall promptly inform local law enforcement or the county welfare department.

Ready to fuel your career? Athens Services is on the lookout for a skilled Fleet Maintenance Technician to join our team. As the go-to expert in diagnosing and repairing mechanical/technical issues in diesel and CNG fleets, you'll be essential to our operation. From reviewing Driver Vehicle Inspection Reports to tackling emergency roadside repairs, your expertise will ensure our fleet runs seamlessly. With experience in heavy truck equipment maintenance, familiarity with DOT CHP repair processes, and excellent communication skills, you're the perfect fit. We offer a competitive benefits package, including medical, dental, and vision coverage, 401K, life insurance, and professional development opportunities. Ready to drive your career forward? Apply now and let's hit the road together! Perform assigned repairs and preventive maintenance tasks in accordance with established Standard Repair Times (SRTs), ensuring work is completed accurately, efficiently, and in compliance with company safety and quality standards. Performs Senior-level repairs and assigned preventative maintenance tasks. Performs the most critical, and complex work in troubleshooting, inspections, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment. Perform safety inspections and checks on vehicles and equipment. Performs roadside emergency diagnosis and repair of roadside equipment as directed by supervision. Completes required paperwork associated with repairing vehicles and equipment; to include documentation of parts usage, and repair times. Attendance and successful accomplishment of all safety and compliance training. • High School Diploma and/or GED, • Familiar with DOT CHP repair processes and controls for Drivers Vehicle Inspection Reports., • Ability to effectively communicate mechanical issues and required repairs., • Perform all tasks safely and in accordance with applicable OSHA rules and regulations., • Consistently behave in a manner that is appropriate and professional., • Ability to read and comprehend service and technical information., • Valid Class C Driver's License., • Acceptable Driver's Record., • You must possess personal tools., • Ability to perform physical requirements of the position with or without reasonable accommodations., • ASE Medium/Heavy Truck Certifications:, • T2: Engine, • T3: Drive Train, • T4: Brakes, • T5: Suspension & Steering, • T6: Electrical/Electronic Systems, • T7: Heating Ventilation & Air Conditioning (HVAC), • T8: Preventative Maintenance Inspection (PMI), • CNG Certification: Compressed Natural Gas Vehicle Certification, • 6 years' experience in heavy truck equipment maintenance & repair or equitable trade school and/or technical certifications., • Trade School Certification, • Bilingual English/Spanish, • Air Brake Certification, • CNG Alternative Fuel experience/training, • CDL Class A/B, • Computer diagnostic skills: Cummins Insite/Allison transmissions, • Forklift operator training/certification Schedule: 5AM - 1:30PM (Monday - Friday + Alternating Saturdays as needed) Salary Range: $35.76 - $38.57 • Competitive wages, • Comprehensive benefit package Medical, Dental, Vision, • 401K, • Life Insurance, • Paid Vacation and Sick Time, • Career plan, • Recognition programs, • Professional development learning, • An exceptional work environment Athens will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring Ordinance and any other applicable state, federal or local laws. EEO/M/F/disability/veteran

Position Overview Under general supervision, leads, oversees, and trains grounds staff and coordinates with contractors, faculty, and managers to identify and eradicate noxious pests, insects, plant diseases, and weeds on district grounds, apply fertilizers, and implements the district's Integrated Pest Management process and practices, in accordance with applicable state and federal law, and performs a variety of tasks and utilizes a variety of equipment in order to maintain the district's grounds and athletic/sports fields in support of instructional and learning activities. (The individual who occupies this position classification is also designated as the IPM coordinator for the district). Supervision Received and Exercised Receives general direction from the Director of Grounds & Transportation and supervision from the Supervisor, Grounds. Exercises technical and functional oversight over and provides training to assigned grounds maintenance staff. Class Characteristics This is the advanced journey-level classification and is responsible for the full range of duties related to leading and implementing the district's Integrated Pest Management processes and practices and weed and pest control and abatement. This position classification is distinguished from the Supervisor, Grounds in that the Supervisor, Grounds position is the full supervisory-level class in the series responsible for organizing, assigning, supervising, and reviewing the work of assigned staff involved in maintenance operations; whereas the Lead is responsible for overseeing day to day operational activities associated with the district's weed and pest control and abatement programs. This position is distinguished from the Grounds and Horticultural Technician and the Grounds Heavy Equipment Operator position classifications by being directly responsible for the district's weed and pest control and abatement programs and for ensuring pesticides, fertilizers, and other chemical substances utilized in maintaining campus grounds and athletic/sports fields are managed in accordance with federal and state laws and regulations. Examples of Essential Functions (Illustrative Only) 1. Serves as the district's IPM coordinator; oversees the chemical program and coordinates with facilities staff, management; coordinates with and oversees contractors; coordinates with managers, staff, and faculty regarding pest abatement and chemical exposure issues associated with instructional and campus events., 2. Meets with inspectors and ensures that the chemical records, training, equipment, containment and practices are followed and meets standards according to federal and state laws and regulations., 3. Provides training, guidance, and instruction to staff for chemical usage and appropriate landscape and cultural practices to ensure healthy plants and safe grounds., 4. Provides training to staff regarding safety in the use of chemicals in accordance with state and federal regulations., 5. Provides training to staff on heavy equipment and safety., 6. Plans and provides training, direction, and guidance regarding campus landscape and athletics/sports field cultural practices., 7. Maintains staff training records regarding the chemical program and ensures they are available for the County Inspector per federal and state laws and regulations., 8. Communicates with managers, staff, and faculty and posts notices regarding pesticide application prior to treatment., 9. Maintains the district's chemical and spray equipment inventory., 10. Orders chemicals appropriate for best safe practices for campus and sports field needs., 11. Maintains federal and state-mandated records and reports related to the application of highly toxic danger/poison, restricted and non-restricted chemical., 12. Mixes and applies accurate measurements of chemical pesticides such as insecticides, rodenticide, fungicides, growth regulators, and herbicides to district campus, athletic complex, sports fields, and greens in order to control and prevent pests, weeds, and plant diseases., 13. Applies fertilizers to district grounds and sport fields., 14. Instructs, trains, and operates grounds maintenance and heavy equipment such as dump trucks, heavy tractors, sweepers, skip loaders, backhoes, boom lift, bucket truck, large chemical boom rig, chemical sprayers complex hydraulic riding mowers, fork lifts and certain farm equipment and attachments for the grading, airification, veritical-cut, scraping, slicing, seeding, broadcasting and digging as required., 15. Operates power tools such as sprayers, chain saws, hedgers, blowers, mowers, and edger's., 16. Identifies equipment needs for each assigned project., 17. Maintains landscaped areas such as bushes, trees, flowers, and shrubs; trims and prunes bushes, trees, and shrubs to provide clearance of sidewalks and signs, as well as to ensure the continued health of the bushes, trees, or shrubs., 18. Removes fallen trees, stumps, fallen limbs, and clears debris from walks, fields, and other facilities., 19. Estimates labor, materials, and equipment needed for assigned projects; monitors inventory levels of materials and equipment; orders, receives, and maintains inventory of materials and equipment as needed., 20. Records and maintains work and material records., 21. Provides recommendations regarding needed parts and suppliers., 22. Observes safe work methods and makes appropriate use of related safety equipment as required., 23. Maintains work areas in a clean and orderly condition, including securing equipment at the close of the workday., 24. Provides needed information and demonstrations concerning how to perform certain work tasks to new employees., 25. Learns and applies emerging technologies and, as necessary, to perform duties in an efficient, organized, and timely manner., 26. Performs other related duties as assigned. Qualifications Knowledge of principles and practices used in the safe application of restricted and non-restricted pesticides, insecticides, rodenticides, growth regulators, herbicides, and fertilizers that contain restrictive chemicals. State and federal laws and regulations pertaining to chemical programs and operations. OSHA safety, County Agriculture commissioner standards and Department of Pesticide Regulations. Integrated Pest Management Program (IPM). Identification of plants, trees, turf, weeds, soils, diseases, pests, chemicals, and its active ingredients. Proper use dilution and mixing of chemicals. Maintains knowledge of documentation requirements (MSDS/SDS). Performs calculations related to proper dilution and mixing of chemicals; understands and interprets instructions provided on product labels in order to properly apply and use chemicals. Principles, practices, methods, equipment, materials, and tools used in grounds maintenance. Safe operation and routine maintenance of heavy equipment such as dump trucks, heavy tractors, sweepers, skip loaders, backhoes, boom trucks forklifts, large chemical boom rig, chemical sprayers complex hydraulic riding mowers, and certain farm equipment and attachments for the grading, airification, veritical-cut, scraping, slicing, seeding, broadcasting and digging and power tools used in ground maintenance. Presentation and public speaking techniques for training and communication. Safety equipment and practices related to the work. Applicable federal, state, and local laws, regulatory codes, ordinances, and procedures relevant to area of responsibility. Occupational hazards and safety equipment and practices related to the work. Safe work practices, including safe driving rules and practices. English usage, spelling, vocabulary, grammar, and punctuation. Techniques for providing a high level of customer service by effectively dealing with the public, vendors, students, and District staff, including individuals of various ages, disabilities, socio-economic and ethnic groups. Skills and Abilities Plan, organize, and provide training on regarding proper use of chemicals; maintenance of landscape, sports turf, and operation of heavy and light equipment. Identify potential soil, plant, turf, and tree diseases and pest infestations and nutrient deficiencies. Perform skilled application of highly danger/poison restricted and non-restricted chemicals pesticides, fungicides, rodenticides herbicides, growth regulators and fertilizers. Write reports for County Agriculture Commissioner and Department of Pesticide Regulation. Understand and interpret federal and state laws and regulations related to chemical usage of restricted and non-restricted chemicals pesticides, fungicides, rodenticides herbicides, growth regulators, and fertilizers. Keep accurate records and make them available for the County Inspector and facilities operation. Implement programs for use of chemicals and IPM. Research chemical materials and determine proper use; perform site specific tests in order to determine effective treatments. Perform basic construction, modification, maintenance, and repair work. Troubleshoot maintenance problems and determine materials, costs, and supplies required for repairs and maintenance projects. Interpret, apply, explain, and ensure compliance with applicable federal, state, and local policies, procedures, laws, and regulations. Understand and follow written and verbal directions, instructions and safety rules and procedures. Maintain accurate logs, records, and basic written reports of work performed. Operate modern office equipment including computer equipment and software programs. Read and interpret manuals, diagrams, blue prints, and technical regulations. Make accurate calculations. Operate a truck, and observe legal and defensive driving practices. Organize own work, set priorities, and meet critical time deadlines. Use English effectively to communicate in person, over the telephone, and in writing. Understand scope of authority in making independent decisions. Review situations accurately and determine appropriate course of action using judgment according to established policies and procedures. Establish, maintain,

The Fullerton School District is seeking qualified individuals for full-time Grounds Equipment Operator positions. This position uses moderate level of grounds maintenance skills and operates and maintains equipment such as large tractors and riding mowers. This career opportunity is an 8-hours/day, 12-month position and includes paid holidays, sick leave, vacation, and a comprehensive benefits package of health, dental, vision and life insurance. The expected working hours are to be from 6:00am - 2:30pm. Education: Graduation from high school or equivalent. Experience: Two years experience in operating and maintaining large power equipment such as tractors, dump trucks, mowers, and skip loader, and related gardening and grounds maintenance is required. Other Requirements: • Possession of a valid Class C California Driver's License, • Insurability to drive a District vehicle as part of the District's Pull Notice Program is required. This will require submitting a Driver's Record that can be obtained from the DMV (in person or online) and drug testing which will require a clinic order to be given after hiring. The driving record must be dated less than one month old from the recruitment closing date. Employment Standards: • Knowledge of: Operation, lubrication and maintenance of tractors and power equipment; methods, materials and tools used in grounds maintenance., • Ability to: Operate large grounds maintenance equipment, tractors and trucks in a safe and efficient manner; perform heavy manual labor; operate equipment from a sitting position for long periods of time; perform grounds maintenance; follow oral and written instructions; work cooperatively with others. Recruitment Procedures: This is a merged promotional and open competitive recruitment. The recruitment process may consist of a training and experience (supplemental responses) evaluation, written test, performance test and/or structured oral interview. To qualify to be placed on an eligibility list, a candidate must obtain a passing score on each part of the examination process. Final scores will be obtained by combining the relative weights of scores on each part of the examination. If Veteran's credit is claimed, proof of status (DD214) must be submitted to the Classified Personnel Commission Office at the same time the application form is submitted or prior to testing. The life of the eligibility list will be 12 (twelve) months. The resulting eligibility list will be used to fill current and future vacancies. Date of Examinations and Interviews: The date(s) of the examination(s) and interviews will be announced at a later date. Candidates who are among the most qualified shall be notified via email, and/or telephone of the time, date and place of the examination(s) or interviews. Applicants who may need a reasonable accommodation for interviewing or testing must notify the Personnel Department three business days prior to the testing date at (714) 447-7458. Attach the following documents here: • DMV Printout (Attach a Copy of your Driver Record less than one month old from recruitment closing date), • Resume (Attach a copy of your Resume here) Applications will be reviewed after the closing date. You will be notified by email regarding the status of your application. Please note that incomplete applications will be screened out. Resumes may be attached but are not a substitute for a completed application. The Board of Trustees desires to provide District employees and job applicants a safe, positive environment where they are assured of full and equal employment access and opportunities, protection from harassment or intimidation, and freedom from any fear of reprisal or retribution for asserting their employment rights in accordance with law.

Job DescriptionOverview We are seeking a skilled and safety-conscious Forklift Operator to join our dynamic team in Cerritos, CA, 90703. In this role, you will play a crucial part in our warehouse operations, ensuring the efficient movement of goods and materials. If you have a passion for logistics and enjoy working in a fast-paced environment, we want to hear from you! Responsibilities • Operate forklifts and other material handling equipment safely and efficiently., • Load and unload materials from trucks and containers., • Transport materials to designated areas within the warehouse., • Perform routine inspections and maintenance on forklifts., • Maintain accurate inventory records and assist with stock management., • Adhere to all safety protocols and guidelines to ensure a safe working environment., • Collaborate with team members to meet daily production goals., • Report any equipment malfunctions or safety concerns to management promptly. Qualifications, • Valid forklift operator certification., • Proven experience operating forklifts in a warehouse or industrial setting., • Strong attention to detail and commitment to safety., • Ability to lift heavy objects and perform physical tasks., • Good communication skills and ability to work as part of a team., • Basic computer skills for inventory management. Machines & technologies you'll use: • Sit-Down Forklift (Raymond)

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now ! Marking Machinist Operator Department: Marking Department/ Area: Shop Floor Position Summary: The candidate will be responsible for operating press for the purpose of impression of identification in fasteners manufactured for the aerospace industry under the tightest tolerances and quality requirements. After the training period, the candidate will be responsible for machine tooling and set-up. Daily tasks: Operate the marking press machines. Visually and dimensionally check samples. Enter production and quality data in computer reporting system. Maintain work area. Keep area clean and organized with required tools and inspection gages. Follow instructions and procedures. Monitor production data and report to supervisors. Weigh count piece production. Participate in training classes as needed and required. Minimum Qualifications: • High school diploma or equivalent, • Good communications skills, • Basic math and reading skills. Reporting Relationships: Reports to Director of Manufacturing and Plant Manager Working Conditions: Repetitive manual motion, heavy physical work. Walking to monitor several machines. Lifting to 25 lbs and moving 40lb pans with dollies. Success Factors: • Ability to read a micrometer and caliper a plus, • Understand the marking operation a plus, • Bilingual a plus, • Simple blueprint reading and use of precision measuring tools, comparators and gages a plus, • Experience on marking all types of materials (such as Inconel 718, Titanium, 8740) a plus. Position Type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. \nCompany Description MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits. MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\nhttps://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD\r\nReference Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.